Trabajos production worker en Orange, New JerseyCrear alertas

Job DescriptionSUMAMRYThe Packer is responsible for accuracy of bag weights, sealing and labeling of bags, coding of bags, checking to be sure the correct bags are being packed, and ensuring volume of output. They are also responsible for keeping the work area neat and clean. Packers may be assigned other duties as needed by the Manager/Supervisor.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operate the pack line in an efficient manner to meet operating targets for efficiency, downtime, and minimal rework, • Repair pallets of finished product as they occur (broken bags, missing labels etc.), • Operate Forklift, • Pull pallets of flour from packing line and place them accurately in designated storage areas with proper scanning using Scanwork, • Operate tote packer; fill totes with farina, whole wheat, flour, etc., • Understand and use Scanworx inventory system in regards to warehouse packing supplies and finished product movements, • Understand policies and procedures set forth by BSM, USDA & other applicable food production entitiesQUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Must have operational knowledge of packing equipment, including a Packer, Check-Weigher, Stacker/Bundler, Palletizer, and Stretch Hooder, • Must be capable of trouble-shooting common issues and communicating problems to maintenance/management, • Must be Forklift Certified, • Must be able to communicate in English, both verbal and written, • Must be able to perform basic math functions, with or without the aid of a calculator, • Must be capable of learning computer entry, • Must be an independent worker with self-initiative to carry out job functions, • Must be willing to rotate shifts and cover absences if requiredPHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Must be able to work in an environment, which has extremes in temperature, • Must be able to climb ladders, • Must have physical dexterity to perform basic repair functions, • Must be able to stand for extended periods of time, • Must be able to bend, stoop, kneel, crouch, twist and crawl frequently, • Must be able to frequently lift and/or move 50 pound bags, • Vision requirements are close vision, distance vision, color vision and depth perceptionWORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, and fumes or airborne particles. The employee is exposed to vibrations. The employee is occasionally exposed to high precarious places. The employee will be exposed to extremes in temperature, both hot and cold. The work environment is noisy, at times in excess of 100 decibels.FOOD SAFETY / SECURITY AND QUALITY REQUIREMENTSThe Company is committed to producing and delivering defect free products that are in compliance with all applicable legal and regulatory requirements and are of the highest levels of food safety, quality and productivity. To ensure this, all employees are required to be trained on and adhere to the FDA Current Good Manufacturing Policies as set forth by the Company as they pertain to personnel practices, equipment and facilities. It is also vital that all employees be aware of their work environment and prevent any accidental or intentional adulteration of the products produced at the facility.FULL-TIME/PART-TIME: Full timeSALARY: $25.49AVAILABILITY: Open AvailabilityPOSITION: Packing OperatorNUMBER OF OPENINGS: 2LOCATION” Strike Force Staffing- Clifton, NJ

Job DescriptionDescription: Job Summary: Responsible for all Customer Service operations, including but not limited to order processing, quoting, portal management, and customer satisfaction. Supervision of the Customer Service Team. Essential Job Functions: • Ensure customer satisfaction by managing customer communications, updates, quoting, and order confirmations, • Enhance client and co-worker relationships: partner with other department leaders to provide input on initiatives, resolve issues, and execute business objectives, • Lead and manage at least one direct report in the Sales Department, • Champion process improvements within Customer Service, including offering new ideas and developing processes within the sales department to improve customer experience, employee satisfaction, and corporate performance, • Exercise judgment to evaluate customer requests and provide accurate lead-time estimates and pricing following the Business Development Strategy, • Proactively review data to identify orders not meeting projected due dates and work with Production, Quality Assurance, and Shipping to minimize late deliveries., • Research documented and undocumented customer complaints for validity, work towards solutions for the client, follow up with the customer when necessary, and deliver and track coaching and corrective action when required, • Monitor and enforce customer credit worthiness. Review and correct administration as required to ensure customer payment issues are resolved., • Work with Senior Management to develop new pricing, communicate and enforce pricing integrity, • Maintain company representation and communications through customer portals as required Requirements: Qualifications: • Minimum of 5 years of Customer Service experience in a Manufacturing-based industry required, • Minimum of 3 years of Leadership Experience required, • Strong understanding of Inventory & Shipping practices required, • Strong organization and Microsoft Office skills required, • Undergraduate degree preferred Management reserves the right to assign or reassign duties and responsibilities to this job at any time.

Health and Nutrition, Bodybuilding, and Growing company This Jobot Job is hosted by: Dylan Currier Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $180,000 per year A bit about us: We’re a powerhouse in the bodybuilding and fitness space, known for delivering premium-quality supplements trusted by athletes and fitness enthusiasts worldwide. From amino acids and creatine to protein powders and pre-workouts, our products fuel peak performance. As a well-established brand with a loyal community, we’re ready to take our marketing to the next level—and that’s where you come in. Why join us? Competitive salary + performance bonuses Health, dental, and vision benefits Product discounts and fitness perks A passionate, high-energy team that loves what they do Opportunity to shape the future of a leading fitness brand Job Details We’re seeking a bold, creative, and performance-driven Director of Marketing to lead our brand strategy and execution. In this role, you’ll be responsible for developing and driving our marketing vision across content creation, social media, digital campaigns, and design. You’ll manage budgets, lead creative initiatives, and build strong brand awareness across all channels. This role requires someone who knows the fitness world, understands the mindset of bodybuilders, and can turn engagement into action. Key Responsibilities: Lead Marketing Strategy: Develop and execute a comprehensive marketing plan to drive brand awareness, customer acquisition, and sales growth. Content Creation: Oversee and contribute to the production of high-quality content including blog posts, emails, videos, landing pages, and more that reflect the brand’s voice and resonate with the bodybuilding community. Social Media Management: Own the strategy and day-to-day execution of all social platforms (Instagram, TikTok, YouTube, etc.), working with influencers, athletes, and internal teams to create engaging, trend-forward content. Design Oversight: Collaborate with designers and creative teams to ensure brand consistency across packaging, ads, digital assets, and in-store materials. Campaign Execution: Plan and execute product launches, promotions, and seasonal campaigns with measurable results. Analytics & Reporting: Track KPIs, analyze campaign performance, and pivot strategies to optimize ROI and customer engagement. Budget Management: Develop and manage the marketing budget, ensuring efficient spend across all channels. Team Leadership: Lead and mentor a growing marketing team, setting clear goals and encouraging innovation and collaboration. Qualifications: 6+ years of experience in marketing, preferably in supplements, fitness, or CPG (consumer packaged goods). Deep understanding of bodybuilding culture, trends, and the fitness consumer mindset. Proven track record of developing and executing successful multi-channel marketing campaigns. Experience managing and creating content for high-growth social media accounts. Strong eye for design, with experience guiding creative projects and brand aesthetics. Proficient in digital marketing tools and platforms (Google Analytics, Meta Ads Manager, Klaviyo, Canva, etc.). Strong leadership, communication, and project management skills. Bonus Points For: Prior experience in the supplements or performance nutrition space. Network of fitness influencers or creators. Adobe Creative Suite experience or ability to jump into light design work. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Leading food manufacturer seeking QA Manager - Excellent benefits + room for growth & advancement! This Jobot Job is hosted by: Gabriel Ozuna Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $70,000 - $70,000 per year A bit about us: For 90 years we have been a leader in the food industry and our brands are recognized nation wide. We pride ourselves in providing the best in class products, quality and service. Why join us? • Competitive Pay, • Excellent Benefits, • Great work/life balance, • Opportunities for continued growth & advancement, • Long term career stability Job Details We are seeking a motivated individual to assure consistent quality of production for plant by developing and enforcing good manufacturing practices (GMP) systems; validating processes, and providing documentation by performing the following duties: • Validate quality processes by establishing product specifications and quality attributes; measuring production; documenting evidence; determining operational and performance qualification; writing and updating quality assurance procedures, • Maintain and improves product quality by completing product, company, system, compliance, and surveillance audits; investigating customer complaints; collaborating with other members of management to develop manufacturing and training methods, • Analyze and prepare responses to customer requests, including but not limited to; audits, quality statement and new specifications, • Update and maintain HACCP programs and lead scheduled HACCP team meetings, • Responsible for calibration and updating of in house analytical testing equipment and communication with equipment vendors regarding technical issues and updates, • Responsible for developing and maintaining a Food Safety/Defense Program which complies with USDA/FDA objectives including Food Safety Modernization Act, • Complete Certificate of Analysis (COA) forms, • In consultation with VP Operations, oversee contact to USDA-APHIS, USDA-FSIS, Nebraska State Department of Agriculture, and FDA, • Coordinate group QA initiatives with other QA Managers, • In consultation with Plant Manager, responsible for ensuring plant operates in compliance with all laws and regulations, • Updates job knowledge by studying trends in and developments in quality management; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations, • Adhere to all safety guidelines and wearing of all required safety gear (PPE), • Adhere, support, and enforce all company policies and procedures, • Microsoft Office (including Word and Excel), • Bilingual in English/Spanish preferred NOT required, • Service oriented, • Ability to communicate with people across all organizational levels, • Ability to work independently and as a part of a team and treat coworkers with respect, • Experience in a QA or QC role, • Experience in the meat processing industry is desired but not required, • Valid driver’s license Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Hybrid - Mostly Remote This Jobot Consulting Job is hosted by: Alyssa Montgomery Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $45 - $80 per hour A bit about us: The Program Manager – Product Development will drive cross-functional programs that bring together hardware, embedded systems, and consumer-facing software applications. This is a high-visibility role where you’ll align global teams, manage New Product Introduction (NPI) processes, and ensure on-time, on-budget delivery of next-generation connected products. This is not a traditional IT or software project management role — we need someone who understands end-to-end product development, from concept through launch, where physical devices and software come together. Why join us? Opportunity to play a key role in the launch of globally recognized, innovative products. Work in a collaborative, creative, and customer-first culture that values curiosity and transparency. Hybrid (mostly reote) Nashville HQ environment with flexibility to collaborate across global teams. Job Details Key Responsibilities Lead new product introduction (NPI) programs from early design through launch, integrating hardware, firmware, and companion applications. Develop project charters, timelines, and risk mitigation plans; oversee execution across global teams. Drive cross-functional alignment among engineering, product, UX, supply chain, and marketing. Coordinate with teams in other countries, ensuring smooth global collaboration and accountability. Prepare program dashboards and reports, providing regular updates to senior leadership. Manage compliance with regulatory standards (UL, CE, FCC, etc.) where relevant. Adapt between stage-gate and Agile/hybrid methodologies depending on program needs. Collaborate with external suppliers and vendors for key program deliverables. Looking for: 5+ years of program or product development management experience in consumer products, appliances, electronics, or connected devices. Proven background delivering hardware + software + connectivity programs (IoT, mobile apps, Bluetooth/Wi-Fi, embedded systems) - You don't have to have experience with all of this, but the more the better! Strong NPI/product development knowledge, including design freezes, prototyping, and production readiness. Experience managing and aligning globally distributed teams across multiple time zones. Excellent communication skills, with the ability to report to executive stakeholders and gain consensus across diverse teams. Familiarity with Agile/Scrum or SAFe; PMP, PMI-ACP, or similar certifications preferred. Bachelor’s degree in Engineering, Computer Science, or related discipline; advanced degree a plus. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription: The Key Objective of the Driver/Warehouse Worker is to contribute to the growth and profitability of Multi-Pak by effectively executing the functions of Warehouse. Specifically, under the general direction of the Warehouse Manager, he/she is responsible and has commensurate authority for the following: -Driving components safely between the Multi-Pak warehouses. -Ability to accurately pull components from a pick ticket for staging purposes. -Loading and unloading components between the Multi-Pak warehouses. -Shipping all finished goods prepared by Multi-Pak and signing the appropriate shipping documentation. Visually inspecting the conditions of all trucks loading Multi-Pak finished goods. -Accurately completing the Warehouse Shipping paperwork. Visually inspecting all pallets to ensure they meet client specifications. -Preparing production lines to run by ensuring that all materials for a run are in the room prior to the commencement of production. -Maintaining accurate inventory records in the warehouse. -Assisting with the investigation of any inventory discrepancies. -Assisting with the preparation of reconciliations. -Assisting with the maintenance of equipment as necessary. -Alerting Quality Supervisor and the Operations Manager if any problems arise. Working with Quality and Operations Manager to troubleshoot problems. -Complying with all SOPs and cGMPs. -Ensuring that all garbage and recyclable materials are properly disposed each day. -Maintaining the warehouse clean and free of debris at all times. Repairing the facility as needed. RESPONSIBILITIES: Essential Functions: The Key Objective of the Driver/Warehouse Worker is achieved if the annual review shows that: -Receiving and Shipping functions are conducted efficiently, in a timely manner and according to all SOPs and cGMPs. -Pallets of components are moved safely and accurately between the Multi-Pak warehouses. -Components and Finished Goods are stored in an orderly manner to prevent confusion and product deterioration. -Accurate inventory records are maintained. -Accurate shipping and receiving records are maintained. -Staging all production rooms accurately and in a timely manner to facilitate the start up of production lines. -Warehousing problems are identified and communicated in a timely manner to ensure that appropriate action can be taken by management to correct the problem. -The Warehouse is maintained in a clean and orderly manner. -All garbage and recyclables are properly disposed of on a daily basis. -A collaborative and positive attitude is maintained. A desire to learn is exhibited. Requirements:

Job Description Job Title: Truck Driver Classification: Hourly, Non-Exempt, Full Time Location: Kearny, NJ Direct Supervisor: Dispatcher Job Summary: The Truck Driver position involves the operation of specialized equipment to ensure the safe and efficient delivery of products to customers or the transfer of materials between terminals and manufacturing sites for production. The Driver is responsible for the secure handling and transportation of various commodities, including Sodium Hydroxide (Caustic Soda Solution), Sodium Hypochlorite Solution (Bleach), Chlorine (in bulk and ton containers), wastewater, and other freight, with strict adherence to safety and load securement protocols. Supervisory Responsibilities: • Perform pre- and post-trip inspections on tractor and trailer, including completing Driver Vehicle Inspection Reports (DVIR) and logging them properly in the electronic logging device (ELD)., • Ensure compliance with all Department of Transportation (DOT) regulations and customer requirements, including placarding, cargo securement, and proper documentation., • Safely load, transport, and unload bulk chemicals such as Sodium Hydroxide, Sodium Hypochlorite, and Chlorine, adhering to Company and industry safety protocols., • Verify accuracy of bills of lading, including special instructions and product specifications., • Report unsafe or abnormal conditions at customer sites and ensure professionalism in all customer interactions., • Valid Class A Commercial Driver’s License (CDL-A) with Tanker and Hazardous Materials endorsements., • Transportation Worker Identification Card (TWIC) and valid medical card., • Minimum of 2 years of tractor-trailer driving experience, preferably with tanker and hazardous materials., • Clean driving record commensurate with hazardous materials transportation standards., • Ability to pass a 10-panel controlled substance test and random testing thereafter., • Background check meeting TSA TWIC criteria., • Must hold required commercial driver's license appropriate for weight of the vehicle to be operated., • Must be capable of standing, walking, or sitting for extended periods of time., • Must be capable of lifting 40 lbs. from the floor to waist height., • Must be able to carry 40 lbs. for short distances., • Must be able to work in inclement weather for extended periods of time. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Description We are currently hiring for 3 open positions within a hospital food service environment in Montclair, NJ (07042). All roles support daily kitchen and food service operations in a fast-paced healthcare setting and require candidates to meet hospital compliance and safety standards. The available positions are: • Food Service Worker, • Cook II (Experienced Cook), • Utility Worker (Dishwasher / Sanitation Candidates must be eligible to work in a hospital/healthcare setting and complete the following screenings: • TB Blood Test or TB Skin Test, • Proof of 2 MMR Immunizations (or titer), • Proof of 2 Varicella Immunizations (or titer) Food Service Worker Pay Rate: $18.54/hr Hours: 6:30 AM – 2:30 PM Location: NJ 07042 Type: Contract to Hire Job Summary: Supports daily hospital food service operations, including food prep, serving, stocking, cleaning, and customer service in a cafeteria or kitchen environment. Responsibilities: • Prepare and serve food in the cafeteria or service areas, • Assist with food prep (cutting, washing, assembling ingredients), • Stock and replenish food and supplies, • Clean and sanitize kitchen and service areas, • Follow food safety and HACCP standards, • 1+ year food service or kitchen experience preferred, • Basic food handling and sanitation knowledge, • Ability to follow instructions and recipes, • Strong teamwork and communication skills, • Ability to stand long periods and lift up to 35 lbs Cook II (Experienced Cook) Pay Rate: $24.79/hr Hours: 6:00 AM – 2:00 PM OR 8:00 AM – 4:00 PM (varies) Type: Contract to Hire Location: NJ 07042 Job Summary: Experienced cook responsible for preparing high-quality meals using advanced cooking techniques in a hospital kitchen environment. Responsibilities: • Prepare large batch meals and complex recipes, • Use advanced cooking techniques and knife skills, • Assist with inventory and kitchen production planning, • Follow standardized recipes and food safety procedures, • Maintain cleanliness and kitchen organization, • 3–4 years cooking or kitchen experience required, • Strong culinary and food preparation skills, • Ability to work in fast-paced hospital environment, • Ability to lift up to 35 lbs and stand long periods Pay Rate: $17.81/hr Hours: 12:00 PM – 8:00 PM (alternating weekends & holidays) Type: Contract to Hire Location: NJ 07042 Job Overview: Responsible for maintaining cleanliness and sanitation throughout the hospital kitchen and food service areas. Responsibilities: • Wash dishes, pots, pans, and utensils, • Clean kitchen areas (floors, walls, refrigerators, surfaces), • Sweep, mop, and maintain sanitary workspaces, • Remove trash and transport supplies/equipment, • Entry-level friendly (no experience required), • High school diploma/GED preferred, • Dependable and punctual, • Ability to perform physical tasks and stand for long periods, • Basic ability to follow instructions If you are interested and meet the requirements, please apply today. Qualified candidates will be contacted to move forward with the next steps in the hiring process. We look forward to reviewing your application.

Quality Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: My client is a leading manufacturing company who is growing! They are looking to add a Quality Engineer to their team who is responsible for supporting aerospace quality assurance activities for manufacturing, repair, inspection, test, supplier quality, customer quality, and regulatory compliance. Why join us? Compensation Up To $120,000 Job Details Essential functions and Responsibilities Quality System, Regulatory, and Customer Compliance Support and assure compliance with applicable aerospace regulatory and quality system requirements, including AS9100, ISO 9001, FAA Part 21 production approval requirements, FAA Part 145 repair station requirements, and applicable customer-specific quality requirements. Review products and documentation in accordance with applicable customer, regulatory, military, industry, and internal quality requirements. Contract, Technical Data, and Quality Planning Review Review customer purchase orders, drawings, specifications, quality clauses, repair instructions, ATPs, OMMs/CMMs, and flow-down requirements to ensure quality planning, inspection, documentation, and release activities are properly defined before work is performed. Work closely with Product Engineering, Manufacturing Engineering, Manufacturing, Test, and Inspection personnel to resolve quality-related issues involving design, methods, tooling, procedures, costs, and product conformance. Establish, revise, and maintain written procedures, instructions, and quality documentation related to product quality assurance activities. Nonconforming Material, MRB, and Corrective Action Participate in Material Review Board and nonconforming material activities, including defect investigation, containment, disposition support, customer notification support, and verification of corrective actions. Perform root cause analysis using tools such as 8D, 5 Whys, fishbone/Ishikawa, and other structured problem-solving methods to identify appropriate corrective and preventive actions. Inspection, Test, FAI, and Product Release Oversee critical testing and inspection activities; coordinate inspections with customers, source inspectors, government representatives, and internal inspection personnel as required. Analyze and document inspection and test results to support product acceptance, customer release, and corrective action activities. Review raw material certifications and approve raw material for production release when required. Prepare, review, and approve product data packages, including inspection records, test reports, material certifications, special process certifications, traceability records, and customer-required documentation. Customer, Supplier, and Delegated Quality Activities Communicate directly with customers, suppliers, auditors, inspectors, and internal stakeholders in a clear, professional, and technically accurate manner. Interface directly with customers to support quality planning, customer concerns, source inspection, audit support, product release, and issue resolution. Education and Skills Requirements Four-year technical degree or equivalent experience required; Mechanical Engineering degree preferred. Four to eight years of experience in Quality Assurance, Quality Engineering, Manufacturing Engineering, or equivalent experience in aerospace, defense, or another highly regulated manufacturing environment. Experience working in a manufacturing environment with frequent shop floor interaction, including direct support of production, inspection, test, engineering, and customer-facing quality activities. Working knowledge of AS9100 and ISO 9001 requirements required. Experience preparing, reviewing, or approving AS9102 First Article Inspection Reports required. Familiarity with FAA 8130-3 documentation, repair station documentation, FAA Part 21 production approval documentation, or FAA Part 145 repair station documentation preferred. Familiarity with APQP/PPAP, AS9145, AS13100, key characteristics, process capability, and MSA preferred. Experience with root cause analysis and corrective action methods, including 8D, 5 Whys, fishbone/Ishikawa, containment, corrective action, preventive action, and effectiveness verification. Experience reviewing aerospace technical data, including drawings, specifications, purchase orders, ATPs, OMMs/CMMs, material certifications, special process certifications, and customer quality clauses. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Manufacturing Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $135,000 per year A bit about us: My client is a leading manufacturing company and is growing! They are looking to add a Manufacturing Engineer who will participate in identifying waste, defining value streams, productivity optimization, Kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools. Why join us? Compensation Up To $135,000 Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance Job Details Responsibilities: Analyze blueprints, specifications, model files (CAD) and other documentation to prepare accurate simulations and supportive data sets / process models for manufacturing projects, particularly those involving insert injection molding of thermoplastics, precision machined components, and/or complex sub-assemblies for the MedTech industry Integrate fully as a partner to Business Development and Solutions Architecture Teams, with primary objective to drive new business opportunities, sales expansion – and further increase competitive advantage through systems engineering and application of Industry 4.0 practices Collaborate with engineering, production, procurement and accounting teams to gather actual cost data, historical summaries of previously quoted business (including tooling costs/lead-times, engineering resource utilization, and achieved manufacturing standards relative to those estimated) with the purpose of refining new business and existing business quotations to drive growth Partner with IT / ERP Teams (Business Analysts) and Manufacturing expand the use of existing systems for real-time / actual data collection, and adoption of new systems for manufacturing data acquisition and process optimization modeling Utilize software tools and engineering knowledge to develop detailed cost models for materials, labor, equipment, and other resources – beyond the print / model provided (look for optimization opportunities) Identify the best possible manufacturing processes and evaluate based on wholistic process flow, all process steps equipment / manufacturing processes for optimized efficiency and cost-effectiveness Generate internal business cases, including projected ROI for CapEx spending justification in collaboration with Accounting Partners; as well as “preferred site” status for manufacturing based on costs, labor availability, and capacity utilization Utilize SolidWorks, CAD/CAM software packages for product DFM, and conceptualization of proposals Utilize and/or identify and Deploy software tools to facilitate data acquisition and analysis, such as Minitab, Sage, Flexsim, Paperless parts or similar Requirements: Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering) Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, and related role in the manufacturing industry, with specific experience utilizing industry 4.0+ best practices and/or Lea Experience working for a Contract Manufacturer or OEM Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment Knowledge, Skills and Abilities Required: Ability to identify the best possible manufacturing processes Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes Experience in product level design for manufacture (DFM) Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Shop Foreman - Machine Builder This Jobot Job is hosted by: Jade Greenlee Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $100,000 per year A bit about us: The Shop Foreman – Machine Builder leads daily shop operations while staying hands-on with machine assembly, machining and fabrication, of semi-custom and custom equipment. This role supervises shop personnel, drives safety and quality, coordinates workflow, and supports projects from prints/BOMs through final build, test, and shipment. Occasional client interaction and support with job estimating are included. Why join us? • 401K, • Health Insurance, • Life Insurance, • PTO, • Holidays Job Details Job Details: We are seeking a driven and experienced Permanent Shop Foreman- Machine Builder to join our dynamic Engineering team. This role is a unique opportunity to lead and manage a talented team of machinists, technicians, and fabricators, while also applying your technical skills in machine building. You will be responsible for overseeing our machine shop operations, ensuring the production of high-quality machinery, and maintaining our commitment to safety and efficiency. With your leadership, our team will continue to innovate, improve, and deliver top-notch machinery to our clients. Responsibilities: 1. Oversee and manage all aspects of our machine shop, ensuring smooth and efficient operations., 2. Lead, mentor, and train a team of machinists, technicians, and fabricators., 3. Ensure the production of high-quality machinery that meets our clients' specifications and needs., 4. Develop and implement strategies for improving shop efficiency and productivity., 5. Work closely with our Engineering team to design, build, and test new machinery., 6. Maintain strict quality control standards, inspecting all machinery for defects or issues before delivery., 7. Handle the creation and management of BOMS (Bill of Materials) for all projects., 8. Foster a safe and healthy work environment, ensuring all safety protocols and standards are adhered to., 9. Manage shop resources, including ordering supplies and maintaining equipment., 10. Handle any issues or conflicts that may arise in the shop, resolving them in a timely and effective manner. Qualifications: 1. A minimum of 5 years of experience in a machine shop environment, with at least 2 years in a leadership or supervisory role., 2. Proficient in BOMS, Quality Management, and Machine Shop operations., 3. Strong knowledge of machine building and design, with a keen eye for detail and quality., 4. Excellent leadership and team management skills, with the ability to motivate and inspire others., 5. Strong problem-solving skills, with the ability to think quickly and make effective decisions under pressure., 6. Excellent communication skills, with the ability to explain complex technical concepts in a clear and understandable manner., 7. A strong commitment to safety, with knowledge of safety protocols and standards in a machine shop environment., 8. Ability to handle multiple tasks and projects simultaneously, with excellent time management skills., 9. Proficient in the use of computer software, including CAD and project management tools., 10. A degree in Engineering, or a related field, is preferred., 11. Certification in Quality Management or a related area is a plus. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

CNC Programmer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: My client is a world leader in the design and manufacture of solenoid valves and flow control components. As they continue to grow, they are looking to add a CNC Programmer to their team. Why join us? Compensation Up To $120,000 Per Year • Great Benefits and 401K Plan, • Opportunity for long term growth Job Details Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs. Programming in Mastercam. Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC. CAD in Solidworks. Read, analyze, and interpret blueprint drawings/specifications. Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc. Organize and maintain programs, setup sheets, and revisions to both. With machine operator or independently, conduct first run prove outs. Revise programs to correct errors or make improvements. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Manufacturing company is looking for a production workers on 1st & 2nd Shift! Job Duties • Responsible for loading sheet metal onto the line,, • Applying glue to the sheet metal and applying channels to the top and bottom of the doors., • Ideal candidate will have previous manufacturing experience, • Expected to be complete with accuracy and efficiency – must have high attention to detail., • Other duties as assigned Experience Required • Ability to lift, carry, and hold up to 50lbs., • Experience working in a manufacturing production environment, • Must be able to read a tape measure and understand decimal conversions, • Ability to stand a majority of the day and lift up to 50 lbs throughout the day! Benefits: This is an Evaluation Hire position. Benefits are available through Express during the evaluation period and include options for Medical, Dental, Vision, etc. Holiday and Sick Pay also available to those who quality; ask your Staffing Consultant for more information! 1ST & 2ND SHIFT AVAILABLE! Company DescriptionFor over 40 years, Express Employment Professionals has been helping people find quality jobs in the Industrial and Office/Professional arenas. Our local office in Hasbrouck Heights has been providing staffing services in northern New Jersey for over 16 years and are affiliated with an international network of over 960 offices in 7 countries. Apply today and find out how we can help you find your next employment opportunity!For over 40 years, Express Employment Professionals has been helping people find quality jobs in the Industrial and Office/Professional arenas. Our local office in Hasbrouck Heights has been providing staffing services in northern New Jersey for over 16 years and are affiliated with an international network of over 960 offices in 7 countries. Apply today and find out how we can help you find your next employment opportunity!

Job Description Here at The Arc Gloucester, we offer the unique opportunity to combine your professional experience with your passion to help individuals with intellectual or development disabilities For almost 70 years, The Arc Gloucester has provided innovative programs and services to individuals with intellectual and developmental disabilities. We have made a difference in the lives of many people and are very proud of that. But it's the individuals we service who bring our programs to life with their creativity, excitement, humor, talent, and so much more! Benefits: The Arc Gloucester offers a comprehensive compensation package that includes healthcare benefits (group medical, dental and vision plans), pet insurance, employer contribution retirement plans, and time off benefits, including paid time for vacation, personal, sick, Holiday pay, jury duty & bereavement. Employees are also eligible for tuition discounts at select local colleges. Excellent Benefits Package: • Competitive pay, • Referral Bonuses, • Health Insurance (Medical, Dental, Vision), • Pet Insurance, • Paid Time Off, • Holiday pay Position: Full-time (40 hours per week), exempt. Typical hours are from 8am – 4pm. Some flexibility is required, including scheduled rotating on-call, weekends and evenings. Due to the essential nature of this position, the facilities manager is required to be on-call, as needed. While performing the duties of this job, the employee occasionally works near moving mechanical parts and in outside weather conditions and is occasionally exposed to wet and/or humid conditions. This position reports to the Chief Operations Officer (COO). This position is supervised by the COO. This position supervises Maintenance workers. Essential Duties and Responsibilities: The following bullet points are from the maintenance worker position recently revamped: • Ensures that work sites operate safely and in compliance with OSHA requirements, • Follows established safety regulations, policies & procedures, • Obtains and analyzies quotes from vedors, • Conducts and performs tasks including painting, structural repairs to masonry, woodwork and furnishing of buildings, plumbing and electrical, • Performs ground maintenance activities, including mowing, trimming, wedding, raking, disposal of leaves and debris, • Performs Snow removal activities, including shoveling, plowing, salt, sand, etc, • Assists with implementing a preventive maintenance schedule, • Ability to adjust to work procedures and work schedules to meet production schedules, including availability for special events as assigned, • Works along with other facility/maintenance workers, internally and external contractors to coordinate activities and ensure timely completion of tasks, • Maintains accurate daily log of mileage and gas purchases when using agency vehicles, • Maintains accurate records of jobs completed at each location, • Assist with the agency’s plans, budgets, and schedules for facilities modifications including cost estimates, bid sheets, layouts, and contracts for construction and acquisitions, • Inspects construction and installation progress to ensure conformance to established specifications, • Assists with the oversight of the coordination of building maintenance required to be completed by subcontractor(s), • Requisitions/purchases required tools, equipment (including personal safety equipment) and supplies; updates and maintains a current inventory, • Inspects completed work by other workers for conformance to blueprints, specifications, and standards, • Establishes and adjusts work procedures and work schedules to meet production schedules, including worker availability for special events as assigned; delegates work accordingly, • Suggests changes in working conditions and use of equipment to increase efficiency of work crew, • Analyzes and resolves work problems, or assists workers in solving work problems, • Maintains time and production records. Develops and implements a preventive maintenance schedule, • Primary department, work location and schedule may vary., • Maintain confidentiality, • Comply with the DDD Program Manual, The Arc Gloucester Policies and Procedures Manual and applicable state, local and federal regulations & policies, • Must cooperate and participate in reviews, investigations, and inspections, including but not limited to DHS Licensing and DHS staff., • Complete and maintain required training, • Associates Degree (AA) or equivalent from a two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience, • 2 years of related experience and training, including Carpentry, Plumbing, Electrical, HVAC and Roofing, equivalent experience for degree, • Knowledge or experience with supporting individuals with intellectual and developmental disabilities is preferred, • Must have a current, non-probationary driver’s license with 5 points or less, and deemed acceptable to drive by The Arc Gloucester’s liability insurance company, • Proficient in basic computer, math, reading comprehension and verbal and written communication skills, • Successfully pass initial and ongoing State/Federal Criminal Background checks, including but not limited to Fingerprinting, CARI checks, Central Registry checks, MVR and drug screens, • Certified in CPR/First Aid While performing the essential functions of this position, the following are required, with or without reasonable accommodation: • Ability to stand, sit, walk, climb or balance, stoop, kneel, drive, crouch, or crawl for extended periods of time, • Ability to use hands to handle or feel objects, tools, or controls and reach with hands and arms, • Ability to operate a computers, phone and other relevant technology, • Physical duties, including but not limited to carrying, driving, general lifting (at least 50 lbs, occasionally up to 100 lbs.), assisting with transferring and lifting of individuals, pushing and pulling (resistance of at least 50 lbs.), bending, twisting, squatting, cleaning, and climbing stairs, • Ability to hear, taste, smell and vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus

Job Description Summary: Performs inspection, maintenance, and/or restoration of utility infrastructure. Performs inspection of energized underground electrical service box and manhole structures. Responsible for the direct supervision of field crews while planning, organizing, and coordinating daily field operations for various job types. Must be at least 21 years of age. Looking for candidates in Georgia and Carolinas. Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions described below: • Perform work according to standard work practices, procedures, and customer specifications, including but not limited to visually inspecting structures, performing minor repair or maintenance work, applying coatings, and restoring the job site to its original condition., • Maintain good customer and public relations by maintaining a professional appearance, being courteous, and communicating in a clear, respectful manner, • Maintain a positive company image, including the appearance of the crew, vehicles, and work areas., • Hire, train, motivate and supervise a crew of at least two employees of diverse backgrounds and skill levels., • Effectively manage daily work and crew to meet safety, quality, production, expense control, and crew management goals., • Organize resources and prioritize work to complete job within established timeframe., • Operate vehicles to transport material, equipment, and crew to and from job site., • Collect, record, and submit accurate, complete and timely data related to timekeeping, payroll, and work performed., • Promote and enforce safety by conducting daily briefings, weekly safety meetings, ensuring safe work practices are followed, monitoring and maintaining tool condition, and ensuring all drivers of company vehicles are qualified through company programs., • Properly maintain all vehicles, equipment, and tools used by the crew., • Maintain adequate inventory of equipment, tools, materials, and supplies., • Integrity and Respect: Conducts work with honesty, integrity, and humility to build trust and gain respect; can be trusted to “do the right thing”; treats others with respect; accepts and values differences; takes responsibility, admits mistakes, and seeks assistance when needed., • Action-Oriented: Enjoys physically challenging and demanding outdoor work; self- starter, motivated, and independent worker; able to balance competing priorities while achieving results., • Directing Others: Establishes and clearly communicates expectations and work direction; challenges others to go beyond minimum expectations; distributes the workload appropriately and provides needed resources; maintains open communications and provides coaching and feedback on performance. Education and/or Experience: High school diploma or general education degree (GED); possess some specialized training or at least three (3) months of related work experience. Training: Must successfully complete all aspects of a multi-week paid Foreman Training Program, covering inspection processes, administration, crew management, paint application, safety, and driver qualification. The length of training is dependent on the profit center and/or type of service. • Qualified Non-Electrical Worker Underground Hazard Awareness Technical Skills: Must be comfortable working within MAD (Minimum Approach Distance) of energized electrical systems of varying voltages. Ability to effectively communicate using e-mail, read and follow maps, understand and follow complex procedures and specifications, and utilize a handheld data collection device (e.g., tablet or handheld computer). Must have strong computer skills and the technical aptitude to learn Osmose software applications. Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Ability to effectively present information in one-on-one and small group situations to customers and other employees of the organization. Physical Demands: While performing the duties of this job, the employee is regularly required to stand and walk. They must have full range of mobility in upper and lower body. The employee is frequently required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk; hear. The employee must regularly lift and/or move up to 50 pounds. Work Environment: While performing the duties of this job, the employee may routinely handle and/or apply painting coatings. The position regularly works in outdoor conditions that include inclement weather, heat and humidity, cold and freezing temperatures, and exposure to poisonous plants, insects, and allergens. The employee may also be exposed to energized electrical equipment and will be required to take appropriate precautions and wear required FR clothing and PPE. The noise level in the work environment is usually moderate with short periods of loud noise exceeding 85 decibels. Travel: Varies by customer and/or location and can include frequent Monday through Friday overnight travel or extended travel for multiple weeks throughout one or more states. Extended work weeks and overtime hours are probable during peak work periods or for specific jobs. Must maintain consistent attendance record and be available for work Monday through Saturday. Osmose is an Equal Opportunity employer. EOE M/F/Disabled/Vet

Job Description SUMAMRY The Packer is responsible for accuracy of bag weights, sealing and labeling of bags, coding of bags, checking to be sure the correct bags are being packed, and ensuring volume of output. They are also responsible for keeping the work area neat and clean. Packers may be assigned other duties as needed by the Manager/Supervisor. Notice: You must attach a resume and answer the talent screening questionnaire. Failure to comply with answering the talent screening questions will result in a rejection of your application ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Operate the pack line in an efficient manner to meet operating targets for efficiency, downtime, and minimal rework, • Repair pallets of finished product as they occur (broken bags, missing labels etc.), • Operate Forklift, • Pull pallets of flour from packing line and place them accurately in designated storage areas with proper scanning using Scanwork, • Operate tote packer; fill totes with farina, whole wheat, flour, etc., • Understand and use Scanworx inventory system in regards to warehouse packing supplies and finished product movements, • Must have operational knowledge of packing equipment, including a Packer, Check-Weigher, Stacker/Bundler, Palletizer, and Stretch Hooder, • Must be capable of trouble-shooting common issues and communicating problems to maintenance/management, • Must be Forklift Certified, • Must be able to communicate in English, both verbal and written, • Must be able to perform basic math functions, with or without the aid of a calculator, • Must be capable of learning computer entry, • Must be an independent worker with self-initiative to carry out job functions, • Must be able to work in an environment, which has extremes in temperature, • Must be able to climb ladders, • Must have physical dexterity to perform basic repair functions, • Must be able to stand for extended periods of time, • Must be able to bend, stoop, kneel, crouch, twist and crawl frequently, • Must be able to frequently lift and/or move 50 pound bags While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, and fumes or airborne particles. The employee is exposed to vibrations. The employee is occasionally exposed to high precarious places. The employee will be exposed to extremes in temperature, both hot and cold. The work environment is noisy, at times in excess of 100 decibels. FOOD SAFETY / SECURITY AND QUALITY REQUIREMENTS The Company is committed to producing and delivering defect free products that are in compliance with all applicable legal and regulatory requirements and are of the highest levels of food safety, quality and productivity. To ensure this, all employees are required to be trained on and adhere to the FDA Current Good Manufacturing Policies as set forth by the Company as they pertain to personnel practices, equipment and facilities. It is also vital that all employees be aware of their work environment and prevent any accidental or intentional adulteration of the products produced at the facility. Notice: You must attach a resume and answer the talent screening questionnaire. Failure to comply with answering the talent screening questions will result in a rejection of your application FULL-TIME/PART-TIME: Full time SALARY: $25.49 AVAILABILITY: Open Availability POSITION: Packing Operator NUMBER OF OPENINGS: 2 LOCATION” Strike Force Staffing- Clifton, NJ Company DescriptionAt Strike Force Staffing, our industry professionals have over 30 years of experience in talent acquisition and placement. Our highest priority is to help companies and candidates find the perfect match with respect to careers and talent acquisition. What sets any company apart from their competitors is the talent they employ and how well they optimize that talent. Similarly, what is most important for candidates is finding careers that are fulfilling. Our goal is to create the stepping stones of success for both job seekers and employers. Find out how Strike Force Staffing can make a difference in your life.At Strike Force Staffing, our industry professionals have over 30 years of experience in talent acquisition and placement. Our highest priority is to help companies and candidates find the perfect match with respect to careers and talent acquisition. What sets any company apart from their competitors is the talent they employ and how well they optimize that talent. Similarly, what is most important for candidates is finding careers that are fulfilling. Our goal is to create the stepping stones of success for both job seekers and employers. Find out how Strike Force Staffing can make a difference in your life.

Responsibilities: • Demonstrates ability to meet production standards on specific assignments within required time, • Maintains good housekeeping and clean work areas in assigned space, • Performs all assignments in accordance with safety specifications, instructions, and requirements, • Responsible for safety and quality throughout production, • Responsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintained, • Reports all production waste/issues to Production Lead or Supervisor, • Performs other duties as required by Supervisor or Manager, • High School diploma or equivalent, • Experience working in a Manufacturing Environment, • Ability to work in a fast paced environment, • Understand plant safety guidelines and pass all required safety training, • Must be able to understand verbal and written instructions, • Troubleshoot problems and report issues, • Ability to be on feet up to 8-12 hours per shift, • Use of hands and fingers to perform job function, • Ability to stoop, kneel, bend and climb Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Aerotek - JobID: JP-005851711 [Production Operator / Assembly Line Worker] As a Panel Builder at Aerotek, you'll: Perform assembling wiring, switches, and other electrical pieces; Install and repair electrical wiring in residences and commercial buildings; Install lighting fixtures and other electri

Aerotek - JobID: JP-005851603 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

PrideStaff - 574802 [Production Operator / Assembly Line Worker] As an Assembler at PrideStaff, you'll: Perform mechanical assembly which is typically highly complex; Be responsible for fitting, aligning or adjusting of components and/or assemblies to close tolerance; Perform troubleshooting, tear d

Job Description Summary: Performs inspection, maintenance, and/or restoration of utility infrastructure. Performs inspection of energized underground electrical service box and manhole structures. Responsible for the direct supervision of field crews while planning, organizing, and coordinating daily field operations for various job types. Must be at least 21 years of age. Looking for candidates in Nebraska, Ohio, and Indiana. Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions described below: • Perform work according to standard work practices, procedures, and customer specifications, including but not limited to visually inspecting structures, performing minor repair or maintenance work, applying coatings, and restoring the job site to its original condition., • Maintain good customer and public relations by maintaining a professional appearance, being courteous, and communicating in a clear, respectful manner, • Maintain a positive company image, including the appearance of the crew, vehicles, and work areas., • Hire, train, motivate and supervise a crew of at least two employees of diverse backgrounds and skill levels., • Effectively manage daily work and crew to meet safety, quality, production, expense control, and crew management goals., • Organize resources and prioritize work to complete job within established timeframe., • Operate vehicles to transport material, equipment, and crew to and from job site., • Collect, record, and submit accurate, complete and timely data related to timekeeping, payroll, and work performed., • Promote and enforce safety by conducting daily briefings, weekly safety meetings, ensuring safe work practices are followed, monitoring and maintaining tool condition, and ensuring all drivers of company vehicles are qualified through company programs., • Properly maintain all vehicles, equipment, and tools used by the crew., • Maintain adequate inventory of equipment, tools, materials, and supplies., • Integrity and Respect: Conducts work with honesty, integrity, and humility to build trust and gain respect; can be trusted to “do the right thing”; treats others with respect; accepts and values differences; takes responsibility, admits mistakes, and seeks assistance when needed., • Action-Oriented: Enjoys physically challenging and demanding outdoor work; self- starter, motivated, and independent worker; able to balance competing priorities while achieving results., • Directing Others: Establishes and clearly communicates expectations and work direction; challenges others to go beyond minimum expectations; distributes the workload appropriately and provides needed resources; maintains open communications and provides coaching and feedback on performance. Education and/or Experience: High school diploma or general education degree (GED); possess some specialized training or at least three (3) months of related work experience. Training: Must successfully complete all aspects of a multi-week paid Foreman Training Program, covering inspection processes, administration, crew management, paint application, safety, and driver qualification. The length of training is dependent on the profit center and/or type of service. • Qualified Non-Electrical Worker Underground Hazard Awareness Technical Skills: Must be comfortable working within MAD (Minimum Approach Distance) of energized electrical systems of varying voltages. Ability to effectively communicate using e-mail, read and follow maps, understand and follow complex procedures and specifications, and utilize a handheld data collection device (e.g., tablet or handheld computer). Must have strong computer skills and the technical aptitude to learn Osmose software applications. Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Ability to effectively present information in one-on-one and small group situations to customers and other employees of the organization. Physical Demands: While performing the duties of this job, the employee is regularly required to stand and walk. They must have full range of mobility in upper and lower body. The employee is frequently required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk; hear. The employee must regularly lift and/or move up to 50 pounds. Work Environment: While performing the duties of this job, the employee may routinely handle and/or apply painting coatings. The position regularly works in outdoor conditions that include inclement weather, heat and humidity, cold and freezing temperatures, and exposure to poisonous plants, insects, and allergens. The employee may also be exposed to energized electrical equipment and will be required to take appropriate precautions and wear required FR clothing and PPE. The noise level in the work environment is usually moderate with short periods of loud noise exceeding 85 decibels. Travel: Varies by customer and/or location and can include frequent Monday through Friday overnight travel or extended travel for multiple weeks throughout one or more states. Extended work weeks and overtime hours are probable during peak work periods or for specific jobs. Must maintain consistent attendance record and be available for work Monday through Saturday. Osmose is an Equal Opportunity employer. EOE M/F/Disabled/Vet

Job Description Summary: Performs inspection, maintenance, and/or restoration of utility infrastructure. Performs inspection of energized underground electrical service box and manhole structures. Responsible for the direct supervision of field crews while planning, organizing, and coordinating daily field operations for various job types. Must be at least 21 years of age. Looking for candidates near San Antonio, TX Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions described below: • Perform work according to standard work practices, procedures, and customer specifications, including but not limited to visually inspecting structures, performing minor repair or maintenance work, applying coatings, and restoring the job site to its original condition., • Maintain good customer and public relations by maintaining a professional appearance, being courteous, and communicating in a clear, respectful manner, • Maintain a positive company image, including the appearance of the crew, vehicles, and work areas., • Hire, train, motivate and supervise a crew of at least two employees of diverse backgrounds and skill levels., • Effectively manage daily work and crew to meet safety, quality, production, expense control, and crew management goals., • Organize resources and prioritize work to complete job within established timeframe., • Operate vehicles to transport material, equipment, and crew to and from job site., • Collect, record, and submit accurate, complete and timely data related to timekeeping, payroll, and work performed., • Promote and enforce safety by conducting daily briefings, weekly safety meetings, ensuring safe work practices are followed, monitoring and maintaining tool condition, and ensuring all drivers of company vehicles are qualified through company programs., • Properly maintain all vehicles, equipment, and tools used by the crew., • Maintain adequate inventory of equipment, tools, materials, and supplies., • Integrity and Respect: Conducts work with honesty, integrity, and humility to build trust and gain respect; can be trusted to “do the right thing”; treats others with respect; accepts and values differences; takes responsibility, admits mistakes, and seeks assistance when needed., • Action-Oriented: Enjoys physically challenging and demanding outdoor work; self- starter, motivated, and independent worker; able to balance competing priorities while achieving results., • Directing Others: Establishes and clearly communicates expectations and work direction; challenges others to go beyond minimum expectations; distributes the workload appropriately and provides needed resources; maintains open communications and provides coaching and feedback on performance. Education and/or Experience: High school diploma or general education degree (GED); possess some specialized training or at least three (3) months of related work experience. Training: Must successfully complete all aspects of a multi-week paid Foreman Training Program, covering inspection processes, administration, crew management, paint application, safety, and driver qualification. The length of training is dependent on the profit center and/or type of service. • Qualified Non-Electrical Worker Underground Hazard Awareness Technical Skills: Must be comfortable working within MAD (Minimum Approach Distance) of energized electrical systems of varying voltages. Ability to effectively communicate using e-mail, read and follow maps, understand and follow complex procedures and specifications, and utilize a handheld data collection device (e.g., tablet or handheld computer). Must have strong computer skills and the technical aptitude to learn Osmose software applications. Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Ability to effectively present information in one-on-one and small group situations to customers and other employees of the organization. Physical Demands: While performing the duties of this job, the employee is regularly required to stand and walk. They must have full range of mobility in upper and lower body. The employee is frequently required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk; hear. The employee must regularly lift and/or move up to 50 pounds. Work Environment: While performing the duties of this job, the employee may routinely handle and/or apply painting coatings. The position regularly works in outdoor conditions that include inclement weather, heat and humidity, cold and freezing temperatures, and exposure to poisonous plants, insects, and allergens. The employee may also be exposed to energized electrical equipment and will be required to take appropriate precautions and wear required FR clothing and PPE. The noise level in the work environment is usually moderate with short periods of loud noise exceeding 85 decibels. Travel: Varies by customer and/or location and can include frequent Monday through Friday overnight travel or extended travel for multiple weeks throughout one or more states. Extended work weeks and overtime hours are probable during peak work periods or for specific jobs. Must maintain consistent attendance record and be available for work Monday through Saturday. Osmose is an Equal Opportunity employer. EOE M/F/Disabled/Vet

Change and set up production reel.Edit reels for quantity, quality, etc.Maintain lot control ticket system.During production run, maintain sample submission to Q.Coordinate packaging material requirements between press room and warehouse.Perform required visual checks to verify quality of product.Du

Frequent lifting and carrying from one area of production to another.

Ability to read ruler to measure pieces before assembly.

Take the next step in your career as our new Coca-Cola Production Line Worker to assist with organizing, stocking, and general upkeep, support the preparation and delivery of goods or services, and work collaboratively across teams and departments.

FULL TIME - Material Prep/ Print Plate Maker.

Understand plant safety guidelines and pass all required safety training. Must be able to understand verbal and written instructions. Exact salary offered will depend on candidate’s experience, work location, skills, etc.

Job Description • We are hiring immediately for full time FOOD SERVICE WORKER/CASHIER positions., • Location: Kean Univeristy - 1000 Morris Avenue, Union, NJ 07083. Note: online applications accepted only., • Schedule: Full time schedule; days and hours may vary. More details upon interview., • Requirement: Prior customer service, cashier, and cash handling experience is required. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: At Gourmet Dining & Chartwells Higher Education, people are at the core of our business. Together we build innovative food service concepts and serve fresh, local and nutritious meals at over 270 college campuses across the country. Twice named the Fastest Growing Brand by Nation’s Restaurant News, at Gourmet Dining & Chartwells we take pride in creating opportunities for associates to grow their careers and achieve their development goals within the company. Job Summary Summary: Performs cashiering duties, including general food service work. Maintains sanitation standards in the preparation, service and dining room facilities. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables. Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards. Distributes supplies, utensils and portable equipment., • Stores foods in designated areas in accordance with wrapping, dating, and food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Ensures compliance with sanitation and safety requirements., • Uses approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Interacts with customers and resolves customer complaints in a friendly, service-oriented manner., • Relays relevant information to supervisor., • Performs sales transactions., • Enters sales into the cash register to ensure purchases are accurately recorded., • Makes change, accepts declining balance cards and other acceptable forms of payment., • Issues receipts to customers., • Follows standard procedures for issuing cash refunds., • Responsible for all assigned change funds and cash receipts, ensuring that cash drawer is in compliance with overage/shortage standards., • Replenishes condiments, beverages and general supplies while maintaining service area cleanliness. We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Full-time and part-time positions offer: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Gourmet Dining maintains a drug-free workplace. Gourmet

Job Description Overview Are you looking for a career you can feel good about? We hire only those that strive to do their best. By joining our family, you'll receive the honor and recognition that comes with working for the industry's global leader in evidenced based rehabilitation. Who We Are: GEO provides complementary, turnkey solutions for numerous government partners worldwide across a spectrum of diversified correctional and community reentry services. From the development of state-of-the-art facilities and the provision of management services and evidence-based rehabilitation to the post-release reintegration and supervision of individuals in the community, GEO offers fully diversified, cost-effective services that deliver enhanced quality and improved outcomes. Why Work for GEO: • We believe that work is more than a place you go to every day. It is about being inspired and motivated to achieve extraordinary things., • Employee benefits play an important role in making The GEO Group a great place to work. At GEO, we believe in the three pillars of employee wellbeing: physical, emotional, and financial. With comprehensive benefits and competitive wages, we trust that you will find all the resources you need here to be successful. Responsibilities Summary: Under direct supervision, the Food Service Worker is a non-security related position that performs a variety of tasks associated with the preparation and serving of foods and beverages, including but not limited to preparing salads, sauces, desserts, coffee, and tea. Responsible for standard food service work including sanitation duties, and various serving responsibilities. Primary Duties and Responsibilities: • The Food Service Worker may be required to perform any of the following food/beverage preparatory work: washing, peeling, scraping and cutting vegetables and fruits; preparing simple salads and slicing cakes and pies; making coffee, tea, and other beverages., • May be required to dish out portions of food on trays or plates, and pours beverages., • The Food Service Worker may be required to perform any of the following cleaning work: scraping, washing, and sorting dishes, glassware and silverware; cleaning kitchen equipment, pots and pans, counters, and tables; sweeping and mopping the floor., • Assists management in simple inventory counts and similar information needed for the placement of food and supply orders. Receives deliveries and takes inventory., • Responsible for the preparation of various documentation required in the food service operation including preparation and inventory pull sheets, production/service documentation, sanitation records, and meal delivery records., • Assists management in conducting orientation and training for staff and detainee workers., • Monitors and directs detainee workers in tray preparation, cleanup, sanitation and other related duties to the operation of the food service area., • Performs other duties as assigned. Qualifications Minimum Requirements: • High school diploma or equivalent certification required., • One (1) year food production experience in commercial, military, or institutional setting is preferred. Experience in the field of corrections/detainee management and prior correctional food service training is preferred.

Job Description • We are hiring immediately for part time FOOD SERVICE WORKER positions., • Location: Monroe Township Board of Ed - 700 North Tuckahoe Road, Williamstown, NJ 08094. Note: online applications accepted only., • Schedule: Part time schedule; Monday through Friday, hours may vary. More details upon interview., • Requirement: Prior food service experience is preferred., • Perks: Willing to train! We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1521531. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Chartwells K12's goal is to make sure students leave the cafeteria happier and healthier than they came in, by serving food kids love to eat and creating custom dining programs. With more than 16,000 associates in 4,300 schools, ranging from large public institutions to small charter and private schools, Chartwells K12 is built on decades of food, education and operational experience driven by top culinary, nutrition, wellness, and sustainability talent. For more information, visit . Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Chartwells K-12 maintains a drug-free workplace.

Job Description • We are hiring immediately for full time FOOD SERVICE WORKER positions., • Location: United Airlines Club C74 - 3 Brewster Road, Newark, NJ 07114 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Fixed Pay Rate: $23.65 per hour. Free meals, uniforms and laundering service available at select locations. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1517025. The advertised program is an AI recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! What makes FLIK click? Our people. The decisions, actions and attitudes of our associates earn the trust and loyalty of our clients every day. We know how to pick them and we know how to grow them. It starts with hiring people who share our passion for food and hospitality. Once we find the right talent, we encourage, value and recognize their contributions. We keep our people renewed, excited and engaged by providing hands-on training and educating them about the latest trends. We give them a stake in successfully raising the bar. Our people love what they do and they love sharing their passion. Join our team and see the FLIK difference. Where a job isn’t merely a job but the start of a career where you can flourish. Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements. Both full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Flik maintains a drug-free workplace.

Job Description • We are hiring immediately for full time and part time FOOD SERVICE WORKER positions., • Location: Winchester Gardens - 333 Elmwood Avenue, Maplewood, New Jersey 07040. Note: online applications accepted only., • Schedule: Full time and part time; Days and hours may vary. Some nights, weekends, and holidays required. More details upon interview., • Requirement: Prior food service experience is preferred., • Perks: Free meal, free parking, and flexible schedule!, • Fixed Pay Rate: $16.75 per hour. Driven by our passion in the pursuit of hospitality and culinary excellence, Morrison Living has built community through dining experiences for over a century. Embedded in our culture, we deliver exceptional service and aim to be the best part of someone’s day. The commitment of our team members to these core principles makes us an industry leader and an employer of choice for hospitality professionals. Everything we do means more when it’s served with care. The exceptional care and culinary artistry of our team members is nurtured by training, developing, and recognizing our greatest asset – our people. This approach makes the Morrison Living difference. Join us and discover how we build community one meal at a time. This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link to apply. Your referral will be able to apply by clicking the link in the email. You can check the status through your profile, accessible via Careers in PeopleHub, by clicking on ‘referral tracking.’ For Employee Referral guidelines, FAQs and the Compass Employee Referral Policy, email . Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements. Morrison Living is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Morrison Living are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Paid Parental Leave, • Holiday Time Off (varies by site/state), • Personal Leave, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Morrison Living maintains a drug-free workplace. Req ID: 1497308 Morrison Living Ashley Norton [[req_classification]]

Job Description • We are hiring immediately for full time FOOD SERVICE WORKER positions., • Location: Prudential Tower - 655 Broad Street, Newark, New Jersey 07102. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. More details upon interview., • Requirements: Prior kitchen experience is preferred., • Fixed Pay Rate: $17.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1505787. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1505787 [[req_classification]]

Job Description • We are hiring immediately for full time and part time FOOD SERVICE WORKER positions., • Location: KIPP Newark - 129 Littleton Avenue, Newark, New Jersey 07103. Note: online applications accepted only., • Schedule: Full time and part time; Monday through Friday, 8:00 am to 2:00 pm. More details upon interview., • Requirement: Prior food service experience is preferred., • Fixed Pay Rate: $15.92 per hour. *Internal Employee Referral Bonus Available We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1516136. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Chartwells K12's goal is to make sure students leave the cafeteria happier and healthier than they came in, by serving food kids love to eat and creating custom dining programs. With more than 16,000 associates in 4,300 schools, ranging from large public institutions to small charter and private schools, Chartwells K12 is built on decades of food, education and operational experience driven by top culinary, nutrition, wellness, and sustainability talent. For more information, visit . Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Chartwells K-12 maintains a drug-free workplace.

Job Description • We are hiring immediately for full time FOOD SERVICE WORKER positions., • Location: Rutgers University - 350 Martin Luther King Boulevard, Newark, New Jersey 07102. Note: online applications accepted only., • Schedule: Full time; Days and hours may vary. More details upon interview., • Requirement: Prior food service experience is preferred., • Fixed Pay Rate: $15.92 per hour. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: At Gourmet Dining & Chartwells Higher Education, people are at the core of our business. Together we build innovative food service concepts and serve fresh, local and nutritious meals at over 270 college campuses across the country. Twice named the Fastest Growing Brand by Nation’s Restaurant News, at Gourmet Dining & Chartwells we take pride in creating opportunities for associates to grow their careers and achieve their development goals within the company. Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements. We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Full-time and part-time positions offer: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Gourmet Dining maintains a drug-free workplace. Gourmet

Maintain company production and quality standards. Make a strong effort to achieve or exceed expected production output. Perform production, quality, and machine troubleshooting on any type of operation or ECM machine.

Aerotek - - Responsibilities: Operate equipment to measure and cut fabric based on instructions; Add hardware finishes to drapes in the hardware department; Utilize basic hand tools for various tasks; Measure and perform final quality checks on drapes before they are packed and shipped; Load, lift,

Maintain company production and quality standards.

This role is focused on execution and performance, working in close partnership with our Master Scheduler to ensure production plans translate into real results. Execution of production schedules and on-time delivery. Continuous improvement across production.

FedEx - - Responsibilities: Process and produce Digital and Signs & Graphics print/finish orders as requested and/or directed; Operate Digital and Signs & Graphics printers, binding and other auxiliary equipment; Perform all phases of equipment set-up, operation and routine maintenance; Maintain eq

Supply Production Floor and/or Manufacturing department with required components, raw materials, and bulk inventory per required production schedule.

Home Depot - - Responsibilities: Load and unload trucks; Move material within the facility; Operate forklifts or other material handling equipment; Sort, stage, and transport products; Assist with general warehouse tasks.

Aerotek - - Responsibilities: Perform Vessel Load Observation (VLO) by inspecting inbound containers for contamination, damage, or irregularities.Clean containers as needed to ensure they meet quality and safety standards.Document all issues, damages, and contamination details in an Excel spreadshe

Nesco Resource - - Responsibilities: Assembles and/or wires complex equipment following blueprints, models, and model prints; Skilled adjusting, fitting, and aligning within close tolerances; Sets up, operates, and maintains basic production machines such as engravers, presses, crimpers, riveting o

Paige Electric, a GCG company, is currently hiring a Warehouse Associate to join our tight knit team in Parsippany, NJ! In this role, you will be responsible for operating a spooling machine to cut wire, picking orders, operating forklifts to move inventory, and assisting in other departments as nee