Quality engineer jobs in Edison, NJCreate job alerts

Job Title: Senior Architect - Mission Critical Facilities Job Type: Full-time. On-Site in Edison, NJ Company Overview: New Jersey Data Center growing Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Computing included. These are the business trends we help clients address. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures. Job Description: We are seeking a Senior Architect who is fully competent in all conventional aspects of Architecture with a specific emphasis on Mission Critical Facilities supporting Office Space. The successful candidate will be required to independently solve problems encountered and perform architectural assignments under general supervision, and use independent judgment in the evaluation, selection, and substantial adaptation/modification of standard techniques, procedures, and criteria. Key Responsibilities: • Team management and coordination of architects and/or technicians on assigned work to ensure that the work is being coordinated between disciplines and tasks are completed on schedule, • Act as the liaison between vendors, contractors, as well as the Operations team to meet deliverables and completion dates, • Draft, write, and proofread full reports and specifications, • Assist with project proposals, scope of work, schedules, and fees, • Develop budget estimates, • Prepare and/or supervise preparation of architectural plans and renderings, consult manufacturers, evaluate and select materials, and inspect architectural features of structures in the field Requirements: • 5-10 years of architectural experience with NCARB registration, • Ability to design in CADD, • Design ability in Revit, and/or BIM is a plus, but preferred., • Registration as a licensed Architect is required for this classification, • Excellent writing skills Travel and Work Schedule: • Normal business hours are Monday through Friday, 8 am - 5 pm. Competitive Benefits: • Comprehensive benefits include Medical, Dental, Vision, Life Insurance, and paid time off., • Salary is based on skill and experience., • Salary range: $100,000 - $130,000 BRUNS-PAK is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, gender identity and/or expression, national origin, disability, veteran, or other protected status.

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy. A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments. Compensation The base hourly rate for this position is $37.18. Johns Manville in Edison, NJ is recruiting for an Industrial Maintenance Mechanic/Millwright Under the direct supervision of the Plant Engineer, responsible for performing all duties in a safe, quality driven, efficient, and professional manner. Working from general instructions from the plant management team, and all levels within the organization in support of the four Johns Manville core values: People, Passion, Performance, and Protection. $39.44 overtime after 40 hours worked. Two shifts available - Monday through Friday Shift: 2pm - 10:30pm Shift: 10:00am - 6:30pm Your Day to Day: • Supervise/manage small projects as assigned. Work independently., • Operate various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs., • Maintains, adjusts, services and lubricates plant equipment such as production machines, mobile equipment, pumps, valves and other process related equipment. Inspects and determines required repairs., • Maintains and makes repairs to plant buildings, facilities, utilities and area systems involving plumbing, carpentry, masonry, pipe fitting and other related crafts., • Diagnose, repair and install power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components., • Performs welding and gas cutting as required., • Diagnose, repair and install pneumatic and hydraulics systems - cylinders, hoses, pumps and valves., • Reports time and documents work orders appropriately to SAP. 9. Utilizes inventory system and assures all parts are removed and returned to inventory as required., • Assists in production line changeover and setup and ability to lead if needed., • Maintain maintenance, TPM, deviation/inspection and other required electronic and written logs as instructed, • Operate overhead crane and lift devices safely & efficiently, • Direct multi-crafts daily in task & job assignment, • Lead MRO Cycle counting Process, • Installation of new equipment as necessary, • Observe specific parts of equipment and materials in process to determine or analyze the cause of machine malfunctions., • Repair and/or make any necessary adjustments to equipment to obtain desired operating results, • Work with engineers, part/mold designers, and other management personnel to set up, operate, and debug assigned equipment, • Provide ownership and input of extrusion and thermoforming processes and equipment for the reduction of downtime., • Start-up, Shutdown, & Set-up of 3 of 3 of the following areas (Inline, Comets, Extrusion), • Initiate/update Preventive Maintenance (PM’s), Standard Operating Procedures (SOP’s), Pre-Task Plans (PTP’s), Safety, • Audits etc., to provide efficient operation of Maintenance Department. What You Bring to the Team: • Minimum of High School Diploma with technical college certification or Associates degree in technical discipline with 7 or more years of industrial experience in mechanical/electrical repairs -- or -- 10 years of strong industrial experience in mechanical/electrical repairs in lieu of a formal education, • Experience operating various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs, • Welding, gas cutting, and fabrication experience, • Experience diagnosing, repairing, and installing power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components, • Intermediate experience with Microsoft Office Suite, • Flexible in work and assignments PHYSICAL DEMANDS: Note: The physical demands described below are representative of those that must be met by and employee to successfully perform the essential functions of this job. • Must be able to stand for long periods of time on cement floors, • Must be able to walk, stoop, kneel, bend and climb ladders and staircases, • Must be able to lift up to 50 lbs. as required Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team. Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees. Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs. Diversity & Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&I council is composed of employees from locations across North American & Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity & inclusion initiatives on JM’s Career page. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Description Job Title: Manufacturing Engineer Location: On Site - Iselin, New Jersey, United States Salary: $80,000 - $110,000 Skills: CAD, SolidWorks, Tooling, Fixtures, Process Improvement About the Machinery Manufacturing Company / The Opportunity: Our client, a dynamic company in the machinery manufacturing industry, is seeking a Manufacturing Engineer to join their team in Iselin, New Jersey. This is an exciting opportunity to contribute to the design and improvement of manufacturing processes, tooling, and fixtures while ensuring high product quality and production efficiency. The role offers the chance to work in a regulated environment, focusing on cleanroom operations, process validation, and cross-functional collaboration. If you are a motivated professional looking to make an impact, this opportunity is perfect for you. • Responsibilities:Design, develop, and enhance manufacturing processes, tooling, and fixtures., • Evaluate and maintain production equipment to ensure optimal performance., • Support production operations, including conducting process validations., • Collaborate with vendors for incoming components and ensure quality standards., • Troubleshoot and resolve manufacturing process and equipment issues., • Apply statistical tools such as Gage R&R, Cp, Cpk, and SPC to optimize processes., • Implement manufacturing concepts like Value Stream Mapping, 5S, and Visual Workplace., • Prepare and maintain protocols, reports, and process documentation., • Work with cross-functional teams to drive process improvements and innovation., • Ensure compliance with FDA regulations, QMS standards, and company policies., • Must-Have Skills:Bachelor’s degree in Mechanical, Electrical, Chemical, Biomedical, or Manufacturing Engineering, or equivalent experience., • 3–5 years of engineering experience in medical device manufacturing or a similar regulated industry., • Experience with cleanroom operations, process validation, and handling production materials/chemicals., • Proficiency in Microsoft Word and Excel, with experience in SolidWorks, Minitab, and CAD., • Strong organizational, problem-solving, and communication skills., • Nice-to-Have Skills:Experience in FDA-regulated environments and familiarity with QMS standards., • Knowledge of advanced manufacturing methods and techniques., • Experience with statistical process control and data analysis tools., • Ability to work independently and collaboratively in a fast-paced environment., • Hands-on experience with lean manufacturing concepts and methodologies.

• Strong background in scale or scaling up facilities (R&D to Manufacturing) 2. P&IDs (AutoCAD, Plant 3D, SolidWorks) 3. Global experience, • Experience: 8-10+ years in chemical engineering, with a strong background in process scale-up and facility design Responsibilities: The Sr. Process Engineer plays a critical role in leading the design, scale-up, and optimization of chemical manufacturing processes from lab to commercial scale. As a senior member of the Global Process Engineering Group (GPEG), this role provides deep chemical engineering and process development expertise, with a strong emphasis on reaction chemistry, P&ID development, and complex project execution. The engineer will act as a cross-functional technical leader, supporting global initiatives and ensuring robust, cost-effective, and high-quality process implementation. • Lead design and scale-up of chemical processes from laboratory to pilot and manufacturing scales with emphasis on reaction chemistry and process control., • Develop and maintain detailed and accurate Piping and Instrumentation Diagrams (P&IDs) for new and existing systems., • Design, execute, and analyze pilot-scale studies, driving process improvements and technology implementation., • Validate and troubleshoot processes and equipment to enhance product yield, consistency, and quality., • Collaborate with R&D, Operations, Quality, and Marketing to ensure seamless technology transfer and manufacturability of new products.

Job DescriptionAbout Yami: Founded in 2013, Yami’s mission is to bring the world closer for everyone to experience and enjoy. We make it easy to discover exciting flavors and trending products from Asia. Named Inc. Magazine’s fastest growing start-up on the ”Inc. 500 List.”, we’re committed to connecting people with authentic food, beauty, home, and wellness experiences through our e-commerce platform, iOS, and Android apps. About the Role : The supervisor of the Fulfillment Center provides leadership for the Fulfillment Center operation team. This person will be responsible for the operation of specific warehouse division activities. You will have the opportunity to coach and develop your Yami associates team. The major focus is to motivate, mentor, and manage your team. You will ensure the production, efficiency, and quality requirement in one or multiple functions among picking orders, packing, receiving, and stowing products while ensuring inventory accuracy, as well as safety management, problem-solving, and training programs. Excellent communication skills with all levels of management and staff will be imperative. Essential Job Responsibilities: • Provide operational supervision in a specific warehouse division with 10-50 associates, plan daily manpower needs, and set schedules to ensure the daily production capability and efficiency target., • Maintain safety and 5S standards, conduct the safety training, and 5S audit to comply with OSHA and company policies and procedures., • Manage quality, productivity, inventory, equipment, facility management, and customer delivery promises, ensure the operational goals are met and the standards are established and followed., • Resolve problems and address staffing needs, handle the complexities and have troubleshooting skills, be able to determine the root cause of defects, and implement corrective solutions., • Mentor, supervise and develop associates and leaders in areas of responsibility, provide feedback and positive reinforcement, handle employee questions, and concerns, and follow up with the intent to maintain a positive work environment., • Need to be data-driven, experienced with operation metrics, and can collect and analyze the existing data to conduct staff performance improvement initiatives., • Collaborate with support teams, including Process Engineer, ICQA, and HR to engage in daily Kaizen and projects., • Participate in process reengineering or WMS optimization from the insight of on-site practice. Qualifications and Requirements: • 2-3+ years of management experience in warehousing, manufacturing, eCommerce operation, or other relevant industries, • Strong communication skills in English, • High school Degree or above, • Dealing with Complexity, • Ability to work a flexible schedule and multitask, • Know lean manufacturing tools and could initiate Kaizen to bring continuous operational improvement., • Bilingual in Chinese preferred, • Job Type: Full-time Benefits & Compensation: • 401(k) matching, • Health insurance, • Vision insurance, • Dental insurance, • Paid time off (PTO): vacation, sick, and holidays, • Employee discount, • Coffee and snacks

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Mechanical Design Engineer plays a pivotal role in the execution of projects within the company. The primary purpose of this role is to participate in the efficient planning, coordination, and execution of project tasks, ensuring adherence to design rules, quality standards, and timelines. Success in this position is marked by meticulous project documentation, effective collaboration with stakeholders, proactive problem-solving, and timely delivery of project milestones. This position is integral to the organization's overall project management framework, contributing to the successful completion of projects and fostering a culture of excellence and innovation. Key Responsibilities: Project Planning and Coordination: • Participate in project planning, scheduling, and coordination activities., • Create detailed design of the system layout in compliance with design rules and the machinery directive., • Generate installation binder and layouts for Customer Documentation., • Check interfaces between subsystems, such as induction units, scanners, chutes, conveyors, and fire doors., • Integrate third-party subsystems into X‐refs, ensuring compatibility and functionality., • Perform clash detection in a 3D environment to identify and resolve conflicts within the sub-project scope., • Participate in the submittal process, creating layouts and drawing lists for review and approval., • Actively participate in project meetings, contributing insights and flagging any risks or opportunities., • Facilitate two-way feedback within the project team, fostering a culture of continuous improvement and collaboration., • Share experience proactively with the team and guide the project around any design pitfalls., • Technical Designer / Machine technician or relevant education and experience, • Professional experience in a similar role within the mechanical engineering is advantageous., • IT skills with CAD Tools., • Knowledge of the design rules in your division and the BEUMER COC product portfolio., • Understanding of mechanical engineering principles and design rules., • Good project coordination skills, including planning, organizing, and prioritizing tasks., • Advanced knowledge of Microsoft Office Suite, particularly Excel and Outlook, • Able to plan and establish individual structure for design work on projects., • Good communication and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams., • Proactive problem-solving and critical thinking abilities., • Strong attention to detail and accuracy in documentation., • Adaptability and flexibility to navigate changing project requirements and priorities., • Ability to work well under pressure and meet tight deadlines. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionAbout UsWe are a rapidly growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. As we expand into a new facility, we are seeking an Electrical & Mechanical Engineer to enhance our production capabilities through advanced automation, control systems, and equipment reliability. This full-time position is for the first shift, starting at 7:30 AM and ending around 5:00 PM. Our ideal candidate has strong hands-on experience with food manufacturing machinery, coupled with in-depth electrical knowledge. They must be capable of diagnosing, repairing, and maintaining production equipment, including PLCs, VFDs, motors, conveyors, and other automated systems. Experience with facility power systems—120V, 208V, 240V, and 480V—is essential, along with familiarity with electrical codes and safety regulations. A valid electrical license or certification is a strong plus. Job SummaryWe are seeking an experienced Electrical & Automation Engineer to join our team. You will be directly involved with maintaining and improving our production machinery, designing and modifying electrical systems, and integrating automation solutions with an emphasis on food manufacturing requirements. You will work closely with engineering, maintenance, and operations teams to ensure uptime, product quality, and operational efficiency. The ideal candidate is self-motivated, detail-oriented, and comfortable working in a fast-paced manufacturing environment. Responsibilities • Diagnose, troubleshoot, and repair electrical and mechanical issues on food manufacturing equipment., • Work with PLCs, VFDs, motors, sensors, and automation controls to maintain and improve production efficiency., • Perform electrical installations, modifications, and upgrades for systems operating at 120V, 208V, 240V, and 480V., • Ensure compliance with all applicable electrical codes, safety standards, and best practices., • Collaborate with cross-functional teams to implement new machinery and automation projects., • Maintain detailed maintenance records and electrical schematics., • Provide technical support to production and maintenance staff., • Assist in developing preventive and predictive maintenance programs for electrical and automation systems. Qualifications • Bachelor’s or Master’s degree in Electrical Engineering or equivalent technical training with relevant manufacturing experience., • Strong knowledge of industrial electrical systems and codes, including 120/208/240/480V applications., • Hands-on experience with PLC programming, troubleshooting, and integration., • Familiarity with VFDs, motors, conveyors, packaging machinery, and related food manufacturing equipment., • Ability to read and interpret electrical schematics and mechanical diagrams., • Electrical license or certification strongly preferred., • Strong organizational and problem-solving skills., • Ability to multitask and prioritize in a dynamic production environment.

Job DescriptionBenefits: • Competitive salary Key Requirements: • Experience needed with Oracle Database Administration, as well as ETL/Data Engineering., • Skills: Proficiency in SQL, PL/SQL, Shell scripting, Python, and ETL tools (like Talend and Informatica)., • Pharma experience is a must, CRO experience is a plusQualifications:, • Expertise in Oracle Database Management: We are looking for someone who can effectively manage and maintain Oracle database instances across different environments (development, testing, production). The candidate needs a deep understanding of database administration tasks such as installation, upgrades, patching, performance tuning, security (access control and encryption), backup and recovery, and automation using scripting languages (e.g., SQL, PL/SQL, Shell scripting)., • Experience with Data Engineering & ETL: We are seeking a professional who is skilled in designing, developing, and implementing ETL (Extract, Transform, Load) processes to move data between systems. This includes building and maintaining data pipelines and working with ETL tools like Talend and Informatica PowerCenter, optimizing ETL performance, and ensuring data accuracy and quality. Flexible work from home options available.

Job Description The Quality Assurance Engineer I is responsible for conducting ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. The Quality Engineer I is expected to: • Maintain SPC limit at or above the corporate target., • Keep customer complaints less than or equal to previous year, • Manage CAR containment and root cause investigation, corrective action plan and completions on time · Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis • Applies GD&T and measurement techniques to review and interpret part print design, quality and intention., • Provides input to the production control systems and designs control activities, • Provides input for new product equipment selection, installation and maintenance, • Identifies opportunities for cost reduction and quality improvements., • Audits work processes and evaluates any non-value-added activities or variations in the processes., • Use appropriate statistical techniques to analyze data and make/recommend decisions, • Participates in root cause investigations and development of corrective action plans. Leads verification and effectiveness activities., • Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products., • Writes detailed work instruction-level documents for Quality and related areas. Trains personnel in these instructions and other technical process controls, • Troubleshoots quality assurance equipment and processes., • Quarantines, documents and evaluates products and materials and generates Material Review Board (MRB) Case(s) as appropriate., • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment, • Ensures control plans and associated documentation are implemented effectively and maintained., • Monitors and reports on quality-related key performance indicators EDUCATION AND EXPERIENCE · Bachelor’s degree in Engineering or a related field is required. · 2-4 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required. LICENSE AND CERTIFICATION · ASQ certification is preferred TECHNICAL SKILLS · Blueprint reading and interpretation · Gage design knowledge · APQP · MSA · PPAP · SPC · GD & T · Automated inspection software · MS Office Suite OTHER SKILLS · Manual dexterity · Spatial dexterity · Problem solving o Root cause analysis o Corrective Action · Multitasking · Written communication · Verbal communication · Organizational skills · Time Management While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job Description Job Title: Project Administrator - Data Center Information Technology/Design/Engineering Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job) Project Administrator NJ Data Center growing Information Technology/Design/Engineer Firm is seeking a Project Administrator to join our team. The Project Administrator is responsible for managing the administrative tasks and logistical aspects of data center construction or expansion projects, including coordinating with various teams, tracking project progress, maintaining documentation, and ensuring smooth execution of project activities under the guidance of a project manager, all while adhering to deadlines and budget constraints; essentially acting as the organizational backbone for the project. Responsibilities include but are not limited to: • · Support project team on all administrative tasks and duties., • · Heavy client/vendor/supplier interaction., • · Preparation of spreadsheet reports, contracts documents, purchase and change order requests, presentations, and correspondence., • · Receive, maintain and distribute submittals, RFI’s, shop drawings and establish project log to record receipt and disposition of same., • · Coordinate project meetings and travel arrangements., • · Maintain electronic and manual database of all project files and archives., • · Other responsibilities normally performed in the execution of a Project Administrator position according to standard Architectural/Engineering industry practices., • · Three to five years experience in Engineering firms or related fields., • · BA is recommended., • · Must exhibit initiative, judgment, and quality in performance and responsibilities., • · Deadline and detail oriented., • · Proficiency in Microsoft Office, Word, Excel, Outlook, Power Point., • · Ability to work well with multi disciplines in a fast-paced environment. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility The Customer Support Hotline Engineer is a hands-on role that demands strong technical expertise, organizational abilities, and exceptional communication skills. This position leverages solid experience in electrical systems and controls to provide support to clients across North America, Mexico, and Central America. The Engineer is also responsible for coordinating and delivering hotline support services for both new and legacy customers, working closely with our European hotline teams to ensure seamless global service. This role offers significant opportunities for career growth and involves collaboration across various technical disciplines, including mechanical and electrical engineering, software development, project management, and customer support. The position may require ongoing training and on-site visits, with frequent travel primarily within North America, and occasional extended international travel as needed. Responsibilities • Ability to learn and understand electrical and control aspects of installed systems, • Access and troubleshooting of electro-mechanical components and systems, including PLC and PC communications., • Understanding system applications and how they translate into operational and functional requirements., • Effective, courteous communication with customers and provide technical expertise to guide and aid in issue resolution., • Investigate a root cause analysis or develop another corrective action in resolving issues., • Communicate and coordinate problem resolution actions with engineering, customer support, and other personnel to resolve issues., • Interpret maintenance manuals, schematics, wiring diagrams and other documentation., • Instructs and directs workers in servicing and repairing equipment., • Consults with engineering personnel to resolve unusual problems in system operation and maintenance., • May supervise workers in testing, tuning, and adjusting equipment to obtain optimum operating performance., • Understand electrical drawings and specifications as they relate to machine control programming., • Strong Customer communication skills., • Develop and implement strategies and standards for training, skills matrix, response and reporting., • Utilize best practices with our European hotline and technical groups,, • Utilize stage gate process in regard to hotline and new systems., • Utilize best practices of Service Now, as defined by Technical Team Leader Required Skills and Abilities • Associates or bachelor's degree in electrical or mechanical engineering, Engineering Technology, technical courses of study or other combinations of experience and training that meet the minimum requirements., • Strong time management and attention to detail, • Strong communication skills: verbal, written and interpersonal, • Excellent Troubleshooting skills, • Ability to handle multiple tasks and work under pressure; sense of both urgency and thoroughness., • Professional, positive, and energetic attitude., • Self-motivated, trustworthy, respectful of others., • Able to travel up to 40% of the time, as per business needs, • Strong PC skills (Windows, Word, Excel, remote capabilities)., • Strong understanding of industrial power, electrical and control circuits and devices., • Good understanding of networks and networking., • Demonstrated capability in PLC programming, with specific focus on SCO Unix, Linux, Siemens, and Allen Bradley based systems., • Ability to interpret schematics, diagrams and other documentation., • Attention to detail and the ability to learn quickly, • Works as part of the team, • Use computer-based tools for communication, trouble shooting, and programming., • To quickly acquire programming skills for machine control platforms Demonstrated expertise of: • Sortation systems, i.e. Crisplant Legacy systems, etc., • Electrical and control troubleshooting Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job Description Process Engineer Reports to: Director of CNC Operations & Process Improvement FLSA Status: Exempt; Professional Exemption.. Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on the afternoon shift (3 PM - 11 PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. Key Responsibilities: • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution., • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone)., • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness., • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput., • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff., • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control., • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning., • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas., • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed., • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate., • Other miscellaneous duties as assigned. Qualifications: • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field)., • 5+ years of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations)., • Proven experience in yield improvement, root cause analysis, and process troubleshooting., • Familiarity with NPI processes, including process validation and production readiness., • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies., • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP)., • Excellent communication and collaboration skills across shifts and cross-functional teams., • Willingness to work on the afternoon shift (3 PM - 11 PM) and occasionally support coverage across other shifts as needed. Preferred Skills and Experience: • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device)., • Six Sigma Green Belt or Lean certification., • Hands-on experience with automation systems, sensors, or high-throughput equipment. Why Join Us? • Work in a fast-paced, innovative environment with room for growth and career development., • Competitive compensation, shift differential, and comprehensive benefits package., • Opportunity to lead impactful projects and gain exposure to high-end manufacturing Physical qualifications and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Staff Engineer - Outside Plant Location: Client Field Offices across New Jersey Employment Type: Full-Time Work Schedule: Monday through Thursday (10 hours/day) About Us: CARIAN is a leading, women-owned consulting and advisory firm dedicated exclusively to the power, renewables, and utilities sectors. We specialize in program management and business intelligence services, partnering with Fortune 500 utilities to navigate complex challenges and deliver transformative results. We are seeking a Staff Engineer – Outside Plant Construction to support critical utility projects across New Jersey. This position provides both engineering and construction support for outside plant utility projects such as Overhead Transmission and Distribution project, working directly in client field offices and ensuring seamless coordination between engineering requirements and construction execution. You will play a critical role in ensuring projects are completed safely, on time, and within scope. Position Summary: The Staff Engineer will be responsible for providing technical expertise and construction oversight for outside plant utility projects, including engineering support, field inspections, and ensuring compliance with project specifications and industry standards. Responsibilities: * Provide on-site engineering and construction support for outside plant (e.g. overhead transmission and distribution) utility projects. * Assist with troubleshooting and resolving technical issues related to both engineering and construction. * Monitor construction progress and address field issues to ensure compliance with project requirements, safety, and quality standards. * Ensure compliance with utility regulations, safety standards, and permitting requirements. * Collaborate with project managers, contractors, and stakeholders to coordinate technical aspects and address field challenges. * Develop and maintain accurate project documentation and status reports. * Utilize Power BI or similar tools to track and report on key performance metrics. * Travel to various project sites as needed. Qualifications: * Bachelor’s degree in Engineering, Construction Management, Science, Business, or a related field. * Valid driver’s license and reliable vehicle for travel to project sites. * Strong knowledge of construction methods, materials, and utility standards. * Ability to work independently and in the field under varying site conditions. * Excellent communication, problem-solving, and project coordination skills. * Proficiency in Microsoft Office Suite and construction management tools. What We Offer: * Competitive compensation and benefits package * Opportunities for professional growth and advancement * A dynamic and collaborative work environment CARIAN takes pride in being an Equal Opportunity Employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, citizenship, gender expression or identity, status as a veteran, and basis of disability or any other federal, state, or local legally protected class. As a Woman-Owned Business Enterprise, CARIAN is committed to providing employment opportunities to women, veterans, and underrepresented minorities.

Job Description The Design Engineer II manages the development and design of complex tools, fixtures and other devices used for production based on engineering specifications. The Design Engineer II is expected to: · Complete projects on time and on budget per customer specifications · Create innovative designs and standards to reduce design time and costs Tool Design Engineering 60% · Supports the activities of assigned departmental Tool Makers in their efforts to develop and debug new and existing tooling designs in support of customer requirements. · Determines tool specifications and requirements by interfacing with manufacturing staff to determine the best design for the tool. · Determines the sequence of operation & number of die stations for progressive cutting, punching and forming to ensure products are produced economically and accurately. · Performs calculations to determine exact dimensions, materials required and cost of the tools. Generates assembly & detail drawings of components required for the fabrication of inspection, assembly, custom automation, power press & four-slide tooling · Resolves a wide variety of manufacturing problems including material characteristics tolerance and process issues, tolling failure issues and process variation issues · Develops flat blank & strip layout drawings for stamping manufacturing process & analysis · Selects standard MSC die components during design to allow efficient low cost concurrent tool mfg · Designs automated machinery to perform various metal forming operations · Designs tooling for a wide variety machine types to be used in the manufacturing environment. Project Management 15% · Assigns and tracks departmental resources needed to support customer-driven projects and new product engineering schedules. · Monitors design engineering project work to ensure all customer requirements for quality, cost and lead time are met appropriately. · Provides timely cost estimates to the Sales and Marketing Group ensuring that the total tooling cost needed to support the customer’s requirements are fully considered and supported · Generates bill of material to identify all components of a design to facilitate manufacturing · Coordinates ordering of tooling components to meet quoted cost & delivery · Works with tooling group, process engineers and outside suppliers to effectively complete projects on time and on budget. · Assists in facilitating the procurement of new equipment. · Develops robust repeatable manufacturing processes that meets all the project requirements. · Captures all process variables to assure a stable process in production. · Assures all documentation is 100% accurate. Creates, develops and recommends improvements to the departments design process. Process Improvement 25% · Works with engineering to identify problems with performance or tool life and recommends solutions or enhancements. · Implements systems that significantly reduces design time and improves accuracy of design output and meets expected deliveries and cost requirements · Standardizes design processes company-wide, maintains updated design standards within the department, and trains departmental engineers on those standards · Implement and execute continuous improvement techniques, as measured against delivery, cost and quality requirements · Measure, Oversee and reduce the cost and time spent in tooling development (both in-house and outside at approved tooling vendors) This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · Bachelor’s degree in Engineering or a related field is required. · 4 - 7 years of experience in the maintenance, repair and construction of progressive and compound dies, tools, jigs and fixtures is required. · Must have a thorough and complete knowledge of manufacturing processes understanding feeds, presses and other auxiliary equipment used in production · Must have a thorough knowledge of machine tool construction and operations and the use of tools, machine shop practices, and the working qualities of materials. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Blueprint reading · Geometric Dimensioning and Tolerancing (GD&T) · Statistical Process Control (SPC) · Measurement Systems Analysis (MSA, GR&R) · Design of Experiments (DOE) · CAD/CAM · ERP software · SolidWorks design software · Statistical analysis software (MiniTab) · MS Office Suite OTHER SKILLS · Written communication · Verbal communication · Multitasking · Problem solving · Organizational skills While performing the duties of this Job, the employee is regularly required to sit and talk or hear. The employee is frequently required to stand; walk; use hands to touch, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate.

Job Description InvestCloud is looking for a practical, detail-focused Database Engineer with a passion for financial data and a desire to grow into a hands-on architecture or platform engineering role. This is a great opportunity for someone early in their data career who enjoys working with real-world investment data, learning from experienced architects, and helping build the foundation for next-generation wealth technology. You’ll work on ingestion pipelines, optimize SQL queries, help model data for performance and scale, and gain exposure to both transactional systems and analytical workflows in the US Wealth space. What does a Great Database Engineer do You’ll partner with engineers, product managers, and data architects to build and maintain clean, scalable, and reliable datasets that power key digital experiences in wealth management. If you’re energized by structured data, interested in how trades, accounts, and positions come together behind the scenes—and you want to sharpen your skills with modern cloud tools—this is your path. Principal Responsibilities • Help design and maintain SQL-based schemas and pipelines for ingesting, transforming, and exposing wealth-related data (accounts, positions, transactions, performance).• Support file-based and table-based storage solutions—from raw data landing zones to curated data marts.• Write efficient, well-structured SQL for ETL/ELT jobs, data validation, and data modeling.• Assist in building out data access layers that support APIs, reports, dashboards, and performance analytics.• Collaborate with senior data architects and engineers to implement data modeling best practices.• Work with QA and product teams to validate accuracy, completeness, and business alignment of data.• Contribute to data documentation and internal knowledge sharing to reduce onboarding time and system confusion. Preferred Skills & Experience• 3+ years of experience in data engineering, database development, or ETL-focused role• Strong SQL skills and familiarity with relational databases (e.g., Postgres, SQL Server, Snowflake)• Exposure to cloud data services (e.g., AWS RDS, S3, Glue, Redshift, or equivalent)• A solid understanding of data modeling principles, including normalization, indexing, and performance tuning• Interest in or exposure to US Wealth Management data—especially trades, positions, custodians, or portfolio accounting systems• Eagerness to learn, collaborate, and grow your technical skills in a production environment Preferred Qualifications• Experience with financial datasets or vendors (e.g., custodians, CRMs, performance systems)• Exposure to data pipeline tools (e.g., dbt, Airflow, Talend) and scripting languages (e.g., Python, Shell)• Understanding of file-based formats (e.g., Parquet, JSON, CSV) and batch ingestion patterns• Familiarity with Agile/Scrum workflows, Jira, Confluence, GitWhat Sets You Apart• You care about data quality, structure, and traceability—not just getting the job done, but getting it right.• You’re curious about the business side of wealth data—why something is modeled a certain way, and how it will be used.• You’re looking for a place to grow your skills with mentorship and hands-on exposure to a modern financial data stack. About InvestCloud InvestCloud, a global leader in wealth technology, aspires to enable a smarter financial future. Driving the digital transformation of the wealth management industry, the company serves a broad array of clients globally, including Wealth and Asset Managers, Wirehouses, Banks, RIAs, and Insurers. In terms of scale, the company’s clients represent more than 40 percent of the $132 trillion of total assets globally. As a leader in delivering personalization and scale across advisory programs, including unified managed accounts (UMA) and separately managed accounts (SMA), the company is committed to the success of its clients. By equipping and enabling advisors and their clients with connected technology, enhanced intelligence, and inspired experiences, InvestCloud delivers leading digital wealth management and financial planning solutions, complemented by a dynamic data warehouse, which scale across the complete wealth continuum. In 2024, InvestCloud was named CNBC World’s Top Fintech Company, a proof point of the company’s commitment to innovation and client success. Headquartered in the United States, InvestCloud serves clients around the world. For more information, visit InvestCloud.com. Our Value • Client Connected, • Human Centered, • Technology Forward, • Respect + Integrity Invest Cloud is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law #LI-HJ1

Job Description We’re Bentley Labs, a cutting-edge formulation and manufacturing partner to the World’s Best Beauty Brands! Our product formulation and production capabilities are wide-ranging and distinctive – with innovative, exciting products across skin care, bath and body, hair, and lip categories. Over the past 16 years, the Bentley team has grown to include some of the industry’s brightest stars. Our diverse and talented group are ever and truly a unit—working together toward an all-consuming vision to be the best. This is a place where we create products that matter, relationships that last, and where ambition is supported and rewarded! We know you work hard and we want you to be successful. What will we do for you? Let’s help you with tuition reimbursement. Don’t know something? Let us send you to classes. Have you heard of DOMO? We’ll teach you that too! Come on in and we’ll show you what else we have to offer you! Who you are…you celebrate your success and others too. You focus on the right solution with each customer. Your passion for providing outstanding service contributes to our high level of customer satisfaction. Building relationships is your strong suit. You like to have fun at work too! Loud laughing encouraged. SUMMARY: We are looking for a Mechanical Engineer with an interest to create and develop new and/or improving current equipment to create a state-of-the-art manufacturing facility. Owning responsible for all phases of the project life cycle including concept generation, preliminary and detail design, analysis, assembly, and test as well as manufacturing support. This role works closely with engineering and manufacturing teams to qualify and execute design inputs, as well as manage external suppliers, vendors, sub-contractors, and internal resources within the company. DUTIES AND RESPONSIBILITIES:  Maintain the knowledge base which consists of, but is not limited to, processes, documentation, engineering change orders, bills of material, product tables and system logs. Create and evaluate the documentation used in production.  Provide technical assistance during the sales phase of the project, including providing estimates of hours for design efforts.  Designs to meet requirements, ensure requirements are satisfied, while balancing the constraints of time and money.  Answers technical questions and resolving technical problems regarding the design, operation, and reliability of the equipment. Working closely with mechanics to trouble-shoot major breakdowns  Responsible for the design of the equipment, or process, develop drawings and BOM.  Creates the design schedule, establishes milestones, and manages the design effort to ensure quality and timeliness of the completed design package.  Serves as the primary focal point for all technical communications with the customer and internal group.  Establishes and maintains a design baseline and manages change orders.  Responds to shop floor feedback regarding technical problems encountered or improvements suggested during manufacture. Manages the resolution/ improvement process.  Inspects incoming equipment; completes FAT prior to shipment; creates and maintains manuals for equipment and custom job orders.  Manage the transferring of 2D CAD system to 3D (SolidWorks); Maintains CAD and SolidWorks databases and ensure accurate and timely retrieval of all engineering data.  Creates a system to maximize standardization with the capability to effectively deviate from standard designs when necessary.  Designs and maintains a system to ensure the continuous improvement of the engineering function to establish the company as a leader in state-of-the-art technology within its product lines.  Establishes the policies and procedures for tasks within this role to be performed on a continuing basis. QUALIFICATIONS:  Experience with production / manufacturing equipment  Degree in Mechanical Engineering  Ability to design solutions to improve productivity  Strong knowledge of machine functionality and baselines  Ability to create machine manuals / operating guide lines Reviewed by Date: Approved by Date: HR Approved Date: Last Update Next Update  Establish perimeters / setting from test result on equipment  Preform IQ, OQ, including FAT’s for new equipment  Knowledge in specifying proper equipment for manufacturing process  Ability to complete projects on time and on budget  Ability to manage multiple projects with no decline in quality control  Excellent verbal and written communication skills  Experience with working with outside vendors with equipment design and build  Bilingual a plus COMPETENCIES:  Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.  Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.  Teamwork--Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.  Planning/Organizing--Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.  Innovation--Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. PHYSICAL REQUIREMENTS:  Standing  Walking  Sitting  Typing/Keyboarding  Light work under 50 lbs. lifting

Job DescriptionSalary: Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond costsuch as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelors degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description Facilities Project Controls Analyst Location: South Plainfield, New Jersey (Hybrid, 3 days/week in-office, with site travel as needed) Position Type: Full-Time About Us CARIAN is a leading, women-owned, purpose-driven consulting and advisory firm dedicated to the power, renewables, and utilities sectors. We partner with top electric and gas utilities to navigate complex challenges, deliver transformative results, and shape a more resilient and sustainable energy future through innovative, strategic solutions. Position Overview CARIAN is seeking a Facilities Project Controls Analyst to support corporate real estate facilities construction projects. The role will focus on project controls, including planning, budgeting, forecasting, and variance analysis. The ideal candidate will have 3-5 years of experience as a Project Cost Engineer or Project Accountant, with a focus on supporting project delivery, financial tracking, reporting, and preparing executive presentations. Responsibilities: * Assist in creating the annual Capital & O&M cost plan for facilities projects. * Manage month-end, quarter-end, and year-end closing processes, including variance analysis and journal entries. * Oversee invoice management for contractors, ensuring timely and accurate processing and reconciliation with project budgets. * Track and forecast project costs and monthly spend, providing regular updates to project teams and leadership. * Identify and mitigate risks related to project costs, schedule delays, and scope changes. * Prepare presentations and reports for project stakeholders. * Collaborate with internal teams, contractors, and clients to ensure all project deliverables meet quality, timeline, and cost expectations. * Identify opportunities for cost savings and project efficiency through financial analysis. * Track and report project performance, ensuring alignment with schedules and budgets. * Ensure adherence to company standards, industry regulations, and safety protocols in all project documentation and execution. * Coordinate with contractors and internal teams to ensure project scope, cost, and timeline adherence. * Support ad-hoc reporting and analysis for decision-making. Qualifications: * Bachelor’s degree in Finance, Accounting, Engineering, or related field. * 3-5 years of experience as a Project Cost Engineer, Project Accountant, or similar role, with facilities or capital project experience. * Strong proficiency in Excel and financial systems. * Ability to prepare and present executive-level presentations. * Strong analytical, business, and communication skills. * Excellent planning, organization, and problem-solving abilities. * Familiarity with PMI project management processes. Desired (Not Required): * Experience with SAP planning tools, models, and processes. * Primavera P6 scheduling software proficiency. * CAPM or PMP Certification. Why CARIAN? Purpose-driven work – Help deliver infrastructure that powers communities. Industry reputation – Trusted by leading utilities for reliability and results. Career growth – Opportunities to take on leadership roles in engineering and program management. Collaborative culture – Join a team that values delivery excellence and long-term relationships. Competitive total rewards – Competitive pay, full benefits, 401(k) match, and meaningful work. CARIAN takes pride in being an Equal Opportunity Employer. We do not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, citizenship, gender identity, veteran status, disability, or any legally protected class. As a Woman-Owned Business Enterprise, CARIAN is committed to providing employment opportunities to women, veterans, and underrepresented minorities.

Job DescriptionDescriptionCME Associates is seeking a highly motivated Water/Wastewater Engineer with 5+ years of experience to join our team in Parlin, NJ. The ideal candidate will play a key role in the planning, design, and implementation of water and wastewater infrastructure projects. This is an excellent opportunity to advance your engineering career with a collaborative and innovative team. Responsibilities • Project Design and Development: Prepare designs, technical specifications, and construction drawings for water distribution, wastewater collection systems, and treatment facilities., • Hydraulic Modeling and Analysis: Conduct hydraulic and hydrologic modeling to optimize system performance and capacity., • Regulatory Compliance: Ensure projects comply with local, state, and federal environmental regulations and permitting requirements., • Assist municipalities and utilities with meeting NJDEP compliance requirements related to drinking water and wastewater regulations, including permitting, reporting, and infrastructure planning., • Construction Support: Provide engineering support during construction, including reviewing submittals, responding to RFIs, and conducting site visits., • Collaboration and Communication: Work closely with multidisciplinary teams, including project managers, surveyors, and environmental scientists, to deliver high-quality solutions., • Maintain and develop strong client relationships by serving as a point of contact, understanding client goals and ensuring satisfaction throughout projects. Qualifications • Education: Bachelor’s degree in Civil, Mechanical, Environmental, or a related Engineering discipline., • Experience: Minimum of 5 years of experience in water/wastewater engineering, including design and project management., • Technical Skills: Proficiency in AutoCAD, Civil 3D, and hydraulic modeling software (e.g., EPANET, WaterCAD, SewerGEMS)., • Licensure: Professional Engineer (PE) license required., • Communication: Strong written and verbal communication skills, with the ability to prepare technical reports and presentations. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job DescriptionDescriptionThe Senior Structural Engineer will be responsible for the detailed design and drafting of structural components for various projects, including, but not limited to, bridges, culverts, dams, buildings and other special structures. This role requires extensive experience in structural detailing, a high level of proficiency in AutoCAD, and the ability to collaborate effectively with cross-functional multi-disciplinary teams. Responsibilities • Structural Design and Detailing: Lead the design and detailing of structural systems for commercial, industrial, and residential projects, ensuring accuracy and compliance with all applicable codes and standards (e.g., AASHTO, NJDOT, ACI, ASCE, IBC NJ Edition, etc.)., • AutoCAD Proficiency: Utilize AutoCAD to prepare comprehensive, bid-ready construction drawings, plans, sections, details and layouts, ensuring precision and adherence to project specifications., • Project Coordination: Collaborate with project managers, engineers, and other team members to ensure seamless integration of design elements and timely completion of projects., • Quality Control: Review and check drawings and specifications for accuracy, completeness, and compliance with project requirements and industry standards., • Education: Bachelor’s degree in Civil Engineering with a focus on Structures or a related field., • Experience: Minimum of 8 years of experience in structural design and detailing, with a proven track record of successfully completing complex projects., • Licensure: Professional Engineer (PE) license in the State of New Jersey is preferred., • Technical Skills: A superior level of proficiency with AutoCAD is required. Familiarity with other design and analysis software (e.g., RISA 3-D, RISA Floor, RISA Foundation, CONSPAN, PennDOT design software, Mathcad, Shoring Suite and others) is a plus., • Communication: Excellent verbal and written communication skills, with the ability to effectively convey complex technical information to diverse audiences. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Residing on the list of the Engineering News Record (ENR)’s Top 500 Design Firms in the nation, TPD is currently hiring a Civil Engineer to serve as a H&H Study/Design Task Leader for Projects in New Jersey & Pennsylvania, with the opportunity to grow into a Project Manager over time if that is a priority for the selected candidate. Our ideal candidate will have 5+ years of experience with H&H study/design and applicable software applications. Immediate projects will include H&H studies/designs for agency, county, municipal, institutional, and private clients in New Jersey and Pennsylvania. Job Requirements • Bachelor’s Degree in Civil Engineering (required), • P.E. License in New Jersey, or Pennsylvania, or both (one state required, and upon hiring, commitment to immediately apply for P.E. License in the other), • Ability to serve as a task leader for H&H studies and designs, including signing/sealing H&H modeling runs and H&H Reports (required), • Experience with software commonly used for H&H studies and designs in New Jersey and Pennsylvania, e.g. HEC-RAS, HEC-HMS, HEC-18, PondPACK or similar, etc., • Familiarity with CADD Software (MicroStation/OpenRoads, AutoCAD), • Familiarity with drainage design, stormwater management design, and E&S design (preferred), • Knowledge of Microsoft Office Suite (required) Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Project Engineer serves as support for the planning, design, and execution of capital projects while being the primary subject matter expert (SME) for electrical and utility MEP systems during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). Key systems include power distribution (medium/low voltage), UPS, emergency power, lighting, and building utility systems (e.g., process water, gases, vacuum, compressed air). This role focuses on ensuring these systems are designed, constructed, and commissioned to meet performance, reliability, and compliance standards. In addition to project execution, the Project Engineer will provide high-level technical guidance to junior facilities staff and support strategic decision-making for existing systems, but will not be responsible for daily maintenance. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $70,000 - $85,000, based on experience. Primary Responsibilities: Project Execution: • Lead the electrical/utility scope for major capital projects from design review to commissioning., • Review design drawings, technical specifications, and submittals for electrical distribution, backup power, grounding, and utility systems to ensure compliance with codes, project requirements, and best practices., • Coordinate with architects, engineers, and contractors to resolve design and field issues., • Oversee installation, testing, and commissioning of electrical and utility systems, ensuring proper performance verification and documentation., • Support construction scheduling, cost control, and quality management in collaboration with the Senior Construction Manager., • Conduct periodic inspections of existing electrical and utility systems to identify risks or upgrade opportunities., • Advise junior staff and vendors on maintenance strategies, safety protocols, and energy optimization measures., • Set technical standards for CMMS (Computerized Maintenance Management System) data entry and reporting related to electrical and utility systems., • Ensure designs and installations meet all applicable codes (NEC, NFPA, local/state building codes) and industry standards., • Bachelor's degree in Electrical Engineering, Architectural/Building Engineering (electrical emphasis), or a closely related field., • 3+ years of experience in electrical and utility systems engineering within industrial, life sciences, or manufacturing environments., • Proven track record in design review, construction coordination, and commissioning of power distribution and utility systems., • Strong understanding of NEC, NFPA, IEEE, and related electrical codes/standards., • Proficiency in reading and interpreting engineering drawings, specs, and as-builts., • Ability to manage multiple priorities in a fast-paced, project-driven environment., • Experience with process utilities for labs (e.g., DI/RO water, lab gases, vacuum, compressed air)., • Familiarity with Building Management Systems (BMS) and Energy Management Systems (EMS)., • PE (Professional Engineer) license, LEED AP, or equivalent certifications., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description About Spectrum Vascular Spectrum Vascular is an innovative medical device company focused on vascular access and medication management. Our mission is to improve the lives of patients worldwide by providing caregivers with high quality, innovative products with exceptional customer service. We are a company that was formed through the acquisition of a portfolio of trusted products that have been widely used by customers for decades. Innovation has been a core strategic pillar throughout our history and many of our products have been designed to deliver antimicrobial and antithrombogenic protection or to support certain patient populations such as those who are critically ill and pediatrics. This role represents a unique opportunity to join a dynamic and growing team with established products and an entrepreneurial mindset. Role Description: The Quality Engineer is responsible for providing hands-on support to assure the successful transfer of acquired technology to a contract manufacturing partner on schedule. This position will monitor, maintain, and/or improve the quality and performance of the Spectrum Vascular catheter product portfolio through technical evaluations, maintenance of design history files, and quality support to address user and/or business needs. Key Responsibilities: • Execute activities necessary to support the vascular access business, specifically the PICC and Mid-line catheter portfolio., • Monitors, maintains, and/or improves the quality and performance of the portfolio through technical evaluations, design history file maintenance, and design improvement implementation to address user and/or business needs., • Perform technical evaluations related to supplier and manufacturing changes to existing products., • Perform design change assessments to determine impact of changes to commercial products., • Support new indications, regulations, and marketed regions associated with existing commercial products., • Maintain Risk Management Files for existing products based on post market surveillance., • Interfaces with external suppliers and internal project teams to ensure the quality of Spectrum Vascular products., • Review test protocols and reports to support development and transfer of projects., • Ensure all activities are executed in alignment with design controls, with the proper documentation for traceability. Support Regulatory filing activities (per 21 CFR 820.30, 21 CFR part 4, ISO 13485), and work closely with team to establish and maintain design control procedures., • Partner with functional areas to develop appropriate prioritization plans and appropriately escalate changes in resource demand, risks, gaps, or challenges., • Facilitate decision-making, collaboration, and problem-solving with people at all levels of the organization to accomplish shared program., • Bachelor's degree in mechanical or biomedical engineering preferred., • Three years-plus of relevant medical device industry experience in quality engineering and/or manufacturing operations., • Knowledge and understanding of molding and extrusion operations, as well as assembly, labeling, and packaging., • Good understanding of FDA regulations, QMS, GMP and ISO standards., • Experience managing diverse project activities with contract CMO facilities, and in particular managing and communicating quality requirements between vendors., • Strong computer skills including proficiency in Excel, Word, SolidWorks, eQMS, and statistical methods., • Hands-on, roll-up-your-sleeves approach with high sense of urgency and drive for results., • Natural entrepreneurial spirit with unrelenting dedication to delivering results., • Desire to work in a fast-paced, innovative environment., • Remote-based, • Dynamic, interactive, fast-paced, and entrepreneurial environment, • Travel – up to 35%, additional may be required during execution of validation activities Spectrum Vascular is an Equal Opportunity Employer and committed to creating a diverse and inclusive company culture. Spectrum Vascular does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law. ime.

Job Description Position Overview: The National Technical Support Engineer is responsible for providing technical support and training on a national basis. As the technical specialist, he/she is the go-to person during installations, modifications, and escalations for all Böwe product lines. He/she is the second line of support on all hardware and software upgrades, maintenance, and emergencies. The TSE is responsible for investigating and resolving customer reports of technical issues with equipment, and eliminating future operational or service difficulties for customers. Essential Job Functions: • Provides on-site technical assistance to help troubleshoot and repair equipment in a reasonable amount of time. Provides a communication link between the customer and Director of National Technical Support to help ensure that effective service is provided to all involved parties., • Provides direct support to customers and Böwe service personnel on all Böwe products; guides and supports customer service engineers; provides training on Böwe products to the customer and technicians as necessary., • Provides second tier troubleshooting on hardware and software problems within specified product lines in conjunction with local customer service engineers; providing technical assistance via phone or at customer sites., • Creates and maintains Product Performance Reports; developing and presenting recommendations on short and long term problem resolutions; maintains a Field Problem log /listing for supervisors and customers; recommends improvements to product design, and keeps management informed of any customer or equipment hardware and software concerns. Provides weekly written feedback about site performance and site issues and maintain site performance reporting., • Provides expert level technical support during new product installation and field conversions or modifications by installing, performing system evaluations and machine validation., • Expands technical knowledge of CSE’s by assessing job skills; identifying training requirements; developing and presenting training classes in the field when needed., • Enhance technical knowledge for service personnel by creating, organizing, reviewing, and updating service documentation, bulletins, retrofit instruction, system machine schematics, etc., • Responsible for delivering and facilitating technical training regarding use and maintenance of old and new Böwe product lines; conducts job task, and training needs analysis at the customer site for customers and service personnel. Regarded as a product specialist., • Actively interface with our parent Böwe Systec GmbH Augsburg (BSA) on technical and development issues., • Fosters positive relationships by communicating with customers and the local teams; responding to complaints/inquires in a cooperative, supportive, and professional manner; negotiating problem resolution; resolving problems in a timely and efficient manner; acting as liaison between the customers, field service, engineering, manufacturing, quality assurance, and other departments within the company to resolve problems. Keeps service team members and customers informed of on-site arrival times, etc., • Provides emergency customer assistance, responds to emergency and non-scheduled calls for service within established response time goals. Perform off-hour tasks if the need arises, per customer schedule and/or request, • Contributes to the team/work group efforts to provide the highest quality of support to the customer by assisting/ supporting in preventive maintenance completions, installations, complex repairs, field changes, upgrades, moves/relocations, and other related tasks in a cooperative/supportive manner., • Other items / duties to jointly be developed when the need arises, • Associate degree or equivalent experience in technical field with 5+ years of advanced mechanical/electronic/software training in mail processing equipment experience required., • Associate degree or equivalent in digital electronics, networking, or related field. Must be an expert in use and maintenance of all Böwe product lines., • Excellent analytical, problem solving, and troubleshooting skills, ability to read and interpret technical drawing and documentation, good project management skills., • Strong interpersonal/customer relations’ skills, clear verbal and written communications, • Proficiency on PC multiple operating systems. Excellent computer skills: Windows, Windows Server, Word and Excel, Project, DB2, HTML, Domain, and the ability to work under minimal supervision and lead project teams., • Ability to layout, maintain, and troubleshoot Networks as they relate to Böwe product lines as well as other product lines covered by Böwe., • Must have extensive experience with Bowe products or equivalent, • Possess strong electromechanical skills and problem solving/troubleshooting abilities, • Must have the ability to respond and adjust to changing or new situations. Work well in high stress environments and maintain professionalism in dealing with customers and co-workers. Needs to be a self-starter and have the ability to work in unsupervised settings., • Must be able to troubleshoot mechanical, electronic, and operational aspects of machines. Responsible for machine service and concentrates on problem solving and preventative maintenance. Excellent customer service skills., • Ability to make travel arrangements within company policy guidelines and in the most cost effective and time efficient manner possible. Travel arrangement will include: hotel, car rental and airline flights, • This position will travel up to 75% of the time. Schedule needs to be flexible to accommodate customer’s schedules. Willing to work outside normal business hours as job dictates. May be required to do shift work and/or extended hours.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices. Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description CAD Operator: Full-time (Hourly) The candidate needed for this position with general supervision and proficiency will operate a CAD workstation, etc., to develop finished drawings. The individual will analyze sketches, notes, and other input material to determine the best approach to complete drawings. A CAD Operator will be fluent in various software packages so as to develop electronic plots as well as operate a plotter to transfer developed drawings to a reproducible medium. This position requires 1 to 2 years CAD experience with some technical coursework. The ability to utilize Revit is a plus and is preferred. Company DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments. Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionSalary: $63,000-$89,000 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for road and bridge inspections. Our ideal candidate will be a highly motivated & qualified individual, with experience in soil testing, quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects.In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and the New York Metro, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. This job requires travel to various job sites within 75 miles of Woodbridge, NJ. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations., • Inspection of testing of soils., • Maintain project records., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Record monitoring well data., • Enter data for Test calculations., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification, • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various job sites within 75 miles of Woodbridge, NJ. Who you are: * • Bachelors degree in Biological Engineering, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Geological Engineering, Materials Engineering, Metallurgy Engineering, Structural Engineering, or Transportation Engineering., • Familiar with ASTM, AASHTO and ACI standards for testing and inspections., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, • International Code Council (ICC) - Soil Inspector, • New Jersey DCA Certified, • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey and New York., • US Citizenship; Authorized to work in the United States., • 3+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with gINT software., • NICET I or II certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job DescriptionSalary: Minimum of range $80,000 annually Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Sales Account Manager for our Integrated Services Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Sales Account Manager directly generates revenue by selling solutions to new and current clients within an assigned territory through face-to-face contact. Assists management in devising sales plans and strategies. The ideal candidate will be tenacious and proficient at developing long term relationships that grow year over year, will always be prepared to act as a consultant and resource to customers and a strong networker with creativity and marketing flair. The job does require some level of travel. Accountabilities • Develop self-generated leads through networking, data mining (from existing client records) and referral generation from previous clients., • Collaborate with Marketing to ensure consistent messaging to customers and help them gather voice of the customer information when needed., • Increase revenue from existing customers and generate additional revenue from new customers by promoting the following services. HVAC, plumbing, electrical, general contracting, preventative maintenance contracts and engineer site staffing., • Identify, qualify and close new preventative maintenance business opportunities., • Answer equipment related questions such as operations, features, and functions., • Perform required documentation for each installation and have each client sign necessary paperwork, and collect payments as directed., • Utilize job site walks to acquire system information., • Through commitment, high standards, persistence and drive, meet or exceed yearly sales revenue and margin goals. Qualifications Skills • Excellent track record in developing territory management to ensure market saturation and profitability, including sales strategies., • Experience with developing written proposals; delivering oral presentations to customers and other stakeholders in a professional manner., • Proficiency with sales management tracking databases., • Proficiency with Microsoft Office (Word, Excel,)., • Experience utilizing social media in a commercial capacity., • Knowledge of and ability to use CRM tools., • Must be able to build relationships and work well across functions. Education and Experience • Minimum of 3 years of successful High-volume, business-to-business (B2B) sales experience., • Commercial HVAC and plumbing industry experience is a plus., • Bachelors degree in business, advertising, marketing or mechanical engineering is a plus., • Clean driving record and valid drivers license; must have reliable transportation. Physical Requirements Physical activity is not limited to walking, bending, kneeling/crouching, pushing, pulling, lifting up to 30 lbs., sitting, standing periods of time and driving. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description Process Engineer Reports to: Director of CNC Operations & Process Improvement FLSA Status: Exempt; Professional Exemption.. Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on the afternoon shift (3 PM – 11 PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. Key Responsibilities: • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution., • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone)., • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness., • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput., • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff., • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control., • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning., • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas., • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed., • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate., • Other miscellaneous duties as assigned. Qualifications: • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field)., • 5+ years of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations)., • Proven experience in yield improvement, root cause analysis, and process troubleshooting., • Familiarity with NPI processes, including process validation and production readiness., • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies., • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP)., • Excellent communication and collaboration skills across shifts and cross-functional teams., • Willingness to work on the afternoon shift (3 PM – 11 PM) and occasionally support coverage across other shifts as needed. Preferred Skills and Experience: • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device)., • Six Sigma Green Belt or Lean certification., • Hands-on experience with automation systems, sensors, or high-throughput equipment. Why Join Us? • Work in a fast-paced, innovative environment with room for growth and career development., • Competitive compensation, shift differential, and comprehensive benefits package., • Opportunity to lead impactful projects and gain exposure to high-end manufacturing Physical qualifications and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionSalary: $70k-100k Position Overview: GRA Design Studio is seeking a skilled and motivated Mechanical Engineer to join our dynamic/engaging team. As a key player in our process-driven and creative engineering team, the ideal candidate will have a strong background in mechanical engineering with a focus on HVAC design. The Mechanical Engineer will be responsible for performing HVAC calculations, generating specifications, and sizing plumbing and gas piping systems. Additionally, the role involves creating detailed mechanical layouts, coordinating with other disciplines, and ensuring that designs are executed to the highest standards. This position requires proficiency in AutoCAD and/or Revit and strong project management skills. At GRA Design Studios, we pride ourselves on our end-to-end product line offering, national reach, and commitment to transparency and external communication. We are a disruptive force in the industry, known for our engaging and transparent approach to every project. Job Description: As a Mechanical, Electrical, Plumbing Engineer at GRA Design Studios, you will be responsible for the following: • HVAC Design: Perform load calculations, develop HVAC system layouts, and be responsible for HVAC material to meet project goals. You will also develop and maintain project schedules to ensure timely delivery., • Plumbing and Gas Piping: Size and design plumbing and gas piping systems, ensuring all layouts are accurate and code-compliant. Collaborate with other disciplines to seamlessly integrate these systems into the overall building design., • Layout Creation: Develop detailed mechanical, electrical and plumbing layouts using AutoCAD and/or Revit, ensuring accuracy, clarity, and compliance with standards., • Project Management: Oversee engineering projects from conception through completion, ensuring timelines, budgets, and quality standards are met. Maintain transparent communication with clients and stakeholders, providing regular updates and detailed reporting., • Documentation and Quality Assurance: Prepare detailed engineering reports, specifications, and documentation. Conduct pre and post construction site visits and inspections to verify that installations meet design intent and participate in the commissioning process., • Education: A Bachelors degree in Mechanical or Electrical Engineering or a closely related field from a 4-year accredited college or university., • Experience: A minimum of 3-5 years of engineering, with proficiency in AutoCAD and/or Revit. Experience in performing HVAC calculations, designing HVAC systems, and generating mechanical layouts is essential. Experience in sizing plumbing and gas piping systems is also required., • Certification: Engineer-In-Training (EIT) certification is preferred., • Skills: Strong project management, problem-solving abilities, attention to detail, and excellent communication skills, both written and verbal. Benefits: * • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. And for years, HORIBA Scientific’s OSIS division has been the preferred, reliable and consistent supplier of OEM spectroscopy components throughout the world … offering a complete range of OEM imaging miniature spectrographs and spectrometers along with CCD, Photodiode array (CMOS) and InGaAs detectors that operate from the UV through to the NIR. Our high reliability products and know-how are leveraged in a wide range of high-tech industries such as: Medical, Semiconductor, Pharmaceutical and Biotech to name a few. Presently, our HORIBA Scientific OSIS Division is searching for an experienced Lead Test Engineer for our North American operation located in Piscataway, New Jersey.The ideal candidate will possess a strong and proven test and measurement background for volume production validation of all electronic circuit boards incorporated into our analytical instruments and light detecting systems involving CCDs, PDAs, InGaAs, and CMOS sensors and related to both spectroscopy and imaging applications.If you are a self-motivated individual with a passion for your work that has garnered success in leading and contributing to team-oriented product development efforts, please keep reading and visit our corporate website to learn more Qualifications: • Advanced degree preferred in electrical engineering or computer engineering with 7+ years of directly related experience., • Minimum of a BSEE degree with 10+ years of directly related experience., • Will accept 15+ years of equivalent engineering design experience associated with test and validation of electronic circuit boards for data acquisition products and/or analytical instruments requiring a high level of field-deployed reliability. Responsibilities: • Develop the test methods and procedures needed to transition products from design into volume manufacturing., • Design accurate test circuits to validate functional performance of end-product detector/camera electronic board assemblies incorporating low-noise analog, power, and high-speed digital circuitry and interfaces., • Design, document, and maintain test fixtures for a volume electronic board turnkey manufacturing environment., • Collaborate with the internal design team and external contract MFG to identify, define, and resolve test issues., • Analyze and interpret test results to identify design and/or test-related problems. Requirements: • Solid understanding of electrical engineering principles in both analog and digital circuits, • Familiarity with low-noise analog and mixed-signal circuits involving op-amps, voltage references, LDOs, DACs, ADCs, and discrete semiconductors., • Demonstrated proficiency in circuit design for test and validation, • Experience with circuit modeling and simulation techniques, • Ability to guide and oversee PCB CAD designers for test fixture board design and development, • Familiarity with test equipment, including oscilloscopes, DVMs, power supplies, and Function Generators, • Sound test & troubleshooting skills., • Demonstrated technical leadership and management skills., • Strong problem-solving, communication, and interpersonal skills. Preferred: • Testing knowledge of electronic boards used in CCD/CMOS detector/camera products, • Experience testing densely populated surface mount electronic boards, • Background in LabVIEW programming a plus HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please email Jo Brodbeck or call (248) 925-1012 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing, and metrology to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. DUTIES: • Lead System Engineer for spectrometer product development and spectroscopy instrumentation including CCD spectrometers, cooled camera systems, prototyping, assembly, testing and automation, • Responsible for all opto-mechanical aspects of product development including: feasibility studies, design, testing/debugging, lab set up, data acquisition, data analysis including resolution, stray light and throughput, and other evaluations for prototype and production hardware, • Acting as Project manager, coordinating various engineering teams towards common goals: a successful, high-performance product, and an on-time release., • Assembly/testing/data analysis of prototypes and ramp-up volumes for design optimization, prior to release to manufacturing, • Must be able to work independently as THE Product Champion leading all R&D disciplines towards competitive product performance and meeting Marketing specifications and cost targets., • Documenting the project (for ISO) and manufacturing process with procedures and work instructions., • Training manufacturing technicians on new product releases and on changes to existing processes, • Writing and presenting reports to customers, engineering, marketing and management, • System BOM costing studies and reduction campaigns in various volumes, • Customer interfacing to support business development, technical support of sales team in pre-sale and post-sale situations, • Summary - Cross-functional collaboration: Bridge gaps between different departments like engineering teams, marketing, sales, and customer service to align efforts around the product, from the development phase to the technical support in pre-sale and post-sale situations. REQUIREMENTS: • Master’s Degree preferred in Physics, Mechanical, Opto-mechanical or Electro-Mechanical Engineering discipline, • 3+ years in Opto-mechanical system Design and/or Manufacturing Engineering role, industrialization and/or qualification/testing programs, • Experience in Mechanical design/engineering. Knowledge of Pro-E (preferred) or Solidworks, • Experience in Zemax or spectrometer alignment a plus, to verify simulated performance is met., • Experience in Spectral data acquisition and analysis a plus. Previous use of CCD and CMOS Scientific Cameras and knowledge of sensors specifications a plus., • Knowledge and experience in UV, visible and infrared optical design and analysis, • Excellent written and verbal communication skills, • Excellent analytical and technical problem-solving skills, • Position requires 4-5 days per week on-site, in Piscataway NJ, • U.S. Citizenship or permanent resident required Horiba offers a full benefit package which includes: Medical, Dental and Vision Life & Disability Vacation, Sick and Holiday Pay Educational Reimbursement 401K with company match Flexible Spending Account

Job Description Technical Staffing Resources (TSR) is seeking an Electrical Engineer to work with one of the largest EPC firms in the country. This is a long-term contract position in Parlin, NJ. Electrical & Instrumentation Engineer As an Electrical & Instrumentation Engineer, you will perform advanced engineering techniques, makes decisions on engineering problems and methods, and interfaces with the client to define project scope. Required to perform electrical engineering and design assignments associated with production, maintenance, process, capital projects, R&D, and power distribution involving the application of established electrical technology and principles, including performing all electrical calculations, and often requiring coordination with other engineering design, and cross-functional competencies to provide economical and expedient task implementation. The assignment will include participation in all electrical functions associated with projects including assistance with front end loading, production design, electrical construction management, commissioning, startup, and troubleshooting activities. Provides technical guidance to designers and less experienced engineers and is consulted extensively by the associates and others with a high degree of reliance placed on scientific interpretations and advice. Job role is responsible for a measurable asset including but not limited to forecasting & budget. Responsibilities · Functions as a project lead for a small project or an area lead for larger projects. · Scope definition from receipt of basic data to Issue for Design process deliverables · Interface with the clients’ cross functional teams to define all operating requirements. · Responsible for study, design, specification, and services related to electrical systems including power generation, power systems performance and control, cabling and wiring, lighting, motor control centers, communication systems, cathodic protection, grounding, lightning protection, heat tracing, etc. · Responsibility for assessing the quality, robustness, and capability of newly designed and installed Capital Projects. · Industrial electrical power distribution ranging from high voltage (greater than 35kV), medium voltage (1kV through 35kV) through low voltage (120V through 1kV) · Electrical power distribution equipment such as generators, substations, switchgear, transformers, motor control centers, distribution panels · Electrical utilization equipment such as motors (AC and DC), controllers, electrical process equipment · Electrical drawing knowledge (reading and generation via MicroStation V8): · Single Line Diagrams · Three Line Diagrams · Schematic Diagrams · Wiring Diagrams · Physical Drawings · Involved in discussions around the control of the process. Frequently pulls in additional technical resources for making decisions about the project viability and resolve any safety concerns or hazards. · Provides engineering, Checkout and Qualification for the Capital Project process control systems, such as distributive control systems and components, instrumentation technology, and programmable logic controllers. · Overall responsibility for design, specification, selection, and services relating to instrumentation and control systems including basic process control systems, safety systems, control panels, analyzer systems, field instrumentation, valves, etc. · May self-perform or lead other engineers to complete project scope and provide technical guidance to less experienced engineers. On some occasions, will also plan, schedule, and conduct work requiring independent judgment and adaptation of engineering techniques. · Participation in Process Hazard Analysis for project-related work. · Define the process design basis for other disciplines, specifically Electrical Systems, conduit sizing, and Instrumentation and interface with these groups throughout detailed design. Leading multidisciplinary small project teams across several different businesses and site infrastructure. · Develop project estimates, scopes, and schedule. May lead estimate reviews. · Work with Construction Manager during FEL as well as to oversee project execution in the field. · Forecasting and project cost tracking, monthly. · Manage scope change technically and commercially. Requirements · Bachelor’s degree in electrical engineering or Control Systems · Must have a good understanding and knowledge of industry codes and standards (NFPA 70E/NEC, OSHA, IEEE, ANSI, NEMA, API, and ASI. · 8+ years of qualified related experience · Experience in the chemical, refining, or biofuels industry required. · Experience with P&ID Development, equipment sizing, electrical calculations, and instrumentation. Demonstrated leadership of process design on capital projects, including responsibility for budget, schedule, and change management. · Professional Engineering (P.E.) license preferred but not required. PHYSICAL REQUIREMENTS · Work is located at a chemical plant and requires exposure to ambient temperature extremes · Work may require using and wearing personal protective equipment such as fire-retardant clothing, hearing and eye protection, hard hat and steel-toed boots · Day-to-day physical requirements involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs frequently, etc · Work requires moderate physical exertion including walking to operating areas and walking up stairs · Assignments may require conducting plant walkdowns and wearing chemical plant or refinery PPE to include an H2S monitor, escape respirator, and FP coveralls. Company DescriptionTechnical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.Technical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Lead Facility Engineer serves as the primary technical subject matter expert (SME) for mechanical, electrical, and plumbing (MEP) systems—particularly HVAC—during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). This role is responsible for ensuring that new facilities are designed, constructed, and commissioned to meet performance, safety, and compliance requirements. In addition to capital project responsibilities, the Lead Facility Engineer will provide high-level technical oversight of existing facilities, advising junior staff and aligning operational decisions with long-term reliability and efficiency goals. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $90,000 - $105,000, based on experience. Primary Responsibilities: • Serve as the HVAC/MEP technical lead for major capital projects, from design through commissioning., • Review and validate design documents, technical specifications, and contractor submittals for compliance with project requirements, codes, and best practices., • Coordinate with architects, engineers, and contractors to resolve design or field issues and ensure alignment with operational needs., • Oversee installation, testing, and commissioning of MEP systems, ensuring performance verification and turnover documentation are complete., • Support construction scheduling, cost control, and quality management, in collaboration with the Senior Construction Manager., • Lead and document punch list resolution for MEP scope., • Conduct periodic inspections and assessments of major building systems to identify risks or improvement opportunities., • Provide technical guidance to junior facilities staff and vendors managing day-to-day maintenance., • Lead the development and oversight of preventive maintenance plans for all facility-owned equipment (e.g., air handlers, boilers, pumps, compressors)., • Set standards for CMMS (Computerized Maintenance Management System) usage and review work order trends, costs, and completion rates for improvement opportunities., • Oversee the planning and supervision of facility routines, preventive maintenance, and operational readiness across all sites., • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Civil/Structural Engineering, Architectural/Building Engineering, or a closely related field., • 4-6+ years of relevant experience in facilities/MEP engineering, construction, or capital projects within industrial, life sciences, or manufacturing environments. Includes experience in HVAC preventative maintenance, balancing, assessment, and knowledge of fabrication techniques., • 2+ years in a technical lead or supervisory capacity., • Proven experience as an HVAC/MEP SME on large capital projects (design review, field coordination, installation oversight, commissioning)., • Experience with AutoCAD and MS Office., • Ability to read and interpret drawings, specs, and submittals, and coordinate RFIs/field changes., • Strong knowledge of the building process, construction principles, relevant codes, and industry standards., • Knowledge of controls and BMS (Building Management Systems)., • Demonstrated ability to set up and oversee preventive maintenance strategies for mission-critical equipment., • Experience in construction administration, commissioning, and startup of HVAC and mechanical/plumbing systems., • Experience in commissioning and system startup., • Understanding of EAV (Exhaust Air Valve), fume hoods, and ventilation requirements in specialized facilities., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description JOB DESCRIPTION We are seeking a dynamic and experienced engineer to support and lead our Mechanical Integrity, Quality Assurance (MIQA), and Reliability Program. This role is essential to ensuring compliance with Process Safety Management (PSM) standards, regulatory requirements, and driving continuous improvement in reliability and safety across our operations. Key Responsibilities • Lead MIQA and Reliability initiatives aligned with PSM standards • Maintain and train teams on the Site MIQA Manual • Integrate MIQA requirements into CMMS tools and workflows • Manage MIQA Heat Map and Action Plans to address gaps and drive improvements • Track and report MIQA performance metrics across site and business levels • Participate in incident investigations, PHAs, PSSRs, and MOC-T changes • Ensure QA and MI compliance in project management and inspection plans • Serve as a member of the Site PSM Committee, leading MI and QA elements Collaborate cross-functionally to support real-time problem-solving and reliability assessments REQUIRED SKILLS AND EXPERIENCE 3-5 years experience with Reliability, Process or Quality Engineering within manufacturing industry Experience with Root Cause Analysis, CAPAs and risk management Background with mechanical integrity, quality assurance, reliability assessments and continuous improvement Bachelors Degree in Mechanical Engineering or related field NICE TO HAVE SKILLS AND EXPERIENCE Mechanical Integrity Quality Assurance (MIQA) Experience Reliability Program/Project Management experience

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills Pay: $110,000 – $130,000 per year Benefits: • 401(k), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • FSA, • HSA, • Paid Time Off, • Paid Holidays, • Profit Share, • Disability Insurance, • Life Insurance, • 8-hour shift

Job DescriptionSalary: Why Should You Join AEIS? At AEIS, we believe in building real relationships, not just contracts. The work you do here isnt just about inspections its about craftsmanship, collaboration, and commitment to quality. And like any meaningful relationship, there needs to be a true fit between you and us in values, purpose, and expectations. This is where youll spend most of your working life. We want it to be worth it for you and for us. When the fit is right, our Inspectors grow into trainers, QA leads, and technical experts. If you're serious about quality and looking for more than just a job, we invite you to explore this opportunity. ABOUT THE ORGANIZATION: AEIS is a leading inspection services and materials testing company in the NY Metro area and proud to be an AWS Accredited Test Facility. With a 20,000 sq. ft. state-of-the-art metallurgy lab in South Plainfield, NJ, our team works at the intersection of construction, failure analysis, welding engineering, and NDT. We are looking for a Metallurgical Engineer for our laboratory in South Plainfield, NJ: Responsibilities: • Select, prepare, mount, and polish samples for analysis, • Capture high-quality images using light and scanning electron microscopes, • Perform advanced testing (EDS, tensile, radiography, etc.), • Maintain lab equipment and ensure accurate calibration, • Document findings in clear, concise reports, • Bachelors in Metallurgical Engineering or Materials Science, • 25 years of hands-on lab experience, • Skilled in sample prep, microscopy, and metallurgical testing, • Strong attention to detail and safety practices U.S. Citizenship required(as per work requirement) COMPENSATION: Compensation is commensurate with experience in a similar role and includes a comprehensive benefits package. This role is an exempt, full time salaried position. Work Location: South Plainfield, NJ Work Remotely No Job Type:Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Monday to Friday, • South Plainfield, NJ: Relocate before starting work (Required) Work Location:In person

Job Description Senior Quality Engineer – Medical Device Do you want to make a difference in the world? Do you want to help save lives? Come start or continue your career with us! MICRO is a contract manufacturer providing services for companies engaged in life-saving products and solutions. MICRO offers an excellent benefits package, compensation higher than industry average and a full complement of training programs dedicated to give our employees the skills and knowledge required to achieve their career goals. So don’t settle for a job when you can have a career that makes a difference! Are you ready to? MISSION The Senior Quality Assurance Engineer is responsible for conducting complex ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. ESSENTIAL DUTIES AND RESPONSIBILITIES Research & Analysis • Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis, • Performs complex data analysis and uses six sigma tools to resolve complex quality issues., • Provides input to the production control systems and designs control activities, • Provides input for new product equipment selection, installation and maintenance, • Maintains expert level of understanding of GD&T, • Leads investigations to determine root cause, development of corrective action plans, verification and effectiveness activities., • Leads projects, teams and complex product transitions., • Develops quality standards and processes related to customer specifications and process improvement, • Communicates with customers, suppliers and other resources to achieve the objectives, • Evaluates process stability and capability, • Analyzes processes and procedures to ensure they fit the organization’s quality standards., • Ensures quality processes and procedures comply with internal SOPs, • Assists with regulatory audits, • Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products., • Writes detailed work instruction-level documents for Quality and related areas. Trains personnel in these instructions and other technical process controls, • Quarantines, documents and evaluates products and materials, • Ensures control plans and associated documentation are implemented effectively and maintained., • Monitors and reports on quality-related key performance indicators, • Ensures compliance and assists with adherence to quality management system ASQ certification is preferred EDUCATION AND EXPERIENCE • Bachelor’s degree in Engineering or a related field is required., • 4 - 6 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required., • Experience reading and interpreting blueprints and gage design knowledge is required., • Experience with GD&T is required., • Experience with automate inspection systems is required., • Proficient in common quality methodologies, including: APQP, MSA, PPAP, SPC., • Strong manual and spatial dexterity skills is required., • Experience with Lean and Six Sigma methodologies is preferred., • Implementation of effective corrective action is strongly preferred., • Ability to work multiple projects., • Strong verbal and written communication skills as well as excellent interpersonal skills are required, • Must have exceptional organizational skills, ability to meet deadlines, thrive in a fast-paced environment and be able to problem solve effectively.

Job DescriptionSalary: $63,000-$89,000 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for road and bridge inspections. Our ideal candidate will be a highly motivated & qualified individual, with experience in soil testing, quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects.In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and the New York Metro, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. This job requires travel to various job sites within 75 miles of Woodbridge, NJ. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations., • Inspection of testing of soils., • Maintain project records., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Record monitoring well data., • Enter data for Test calculations., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification, • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various job sites within 75 miles of Woodbridge, NJ. Who you are: * • Bachelors degree in Biological Engineering, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Geological Engineering, Materials Engineering, Metallurgy Engineering, Structural Engineering, or Transportation Engineering., • Familiar with ASTM, AASHTO and ACI standards for testing and inspections., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, • International Code Council (ICC) - Soil Inspector, • New Jersey DCA Certified, • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey and New York., • US Citizenship; Authorized to work in the United States., • 3+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with gINT software., • NICET I or II certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job Description Ranked the overall #5 Best Civil Engineering Firm to Work for in the Nation and residing on the list of the Engineering News Record (ENR)’s Top 500 Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has 3-5 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities may include, but are not limited to: • Preparation of trip generation estimates, roadway volume development, parking estimates, and analyses for their projects within the team., • Assisting in the analysis of field data, reports, maps, drawings, blueprints, tests, and aerial photographs to plan projects., • Obtaining, analyzing, and interpreting demographic and other regional transportation planning data., • Use of computer-assisted engineering and design software and equipment to prepare engineering and planning documents., • Assisting in the preparation or modification of planning documents, including transportation impact studies, and traffic operational analyses, for projects., • Assisting in the collection of field data., • Serving as onsite project representative., • Use of planning software and equipment to prepare engineering, design, and planning documents., • Responsible for job-specific quality system tasks as defined in the quality manual or handbook., • Responsible for other general office duties as may be assigned. Job Requirements: • Bachelor’s Degree in Engineering, • Engineer in Training Certification Preferred, • Experience utilizing any or all of the following: Synchro, SimTraffic, Excel, AutoCAD/MicroStation (preferred but not required), • Aptitude for detail-oriented work assignments, • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job DescriptionJOB DESCRIPTION Job Title: Structural Engineer- Open Web Steel Bar Joist Design FLSA Status: Exempt Job Type: Full-time Reports To: CEO OEG Building Materials is a leading steel manufacturing company based in Sayreville, NJ. We specialize in high-quality structural steel products for commercial and industrial construction. We take pride in our innovative solutions, fast turnaround times, and commitment to customer satisfaction. Job Description: We are seeking an experienced Structural Engineer with a strong background in Open Web Steel Bar Joist design to join our team. The ideal candidate will be responsible for designing and analyzing steel joists in accordance with industry standards and customer specifications, supporting both manufacturing and sales operations. Responsibilities: • Design open web steel bar joists for commercial and industrial buildings in compliance with SJI (Steel Joist Institute) standards and project requirements., • Perform structural analysis using engineering software and manual calculations., • Collaborate with drafting, production, and project management teams to ensure accurate and efficient manufacturing processes., • Review architectural and structural drawings to determine design criteria., • Provide technical guidance and support to internal departments and external clients., • Ensure all engineering work meets applicable codes, standards, and safety regulations. Qualifications: • Bachelor’s degree in civil or Structural Engineering (master’s preferred)., • PE license (or in progress) is a plus., • Minimum 3 years of experience in steel joist design., • Proficiency with structural analysis software (e.g., RISA, SAP2000, STAAD, or similar)., • Knowledge of AISC and SJI standards., • Strong communication, problem-solving, and organizational skills. Benefits: • Competitive salary based on experience., • Health, dental, and vision insurance., • Paid time off and holidays., • 401K plan, • Opportunities for growth in a fast-paced manufacturing environment. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to stand, sit, talk, hear, and use hands and fingers to operate a computer, keyboard, and telephone. * Lift objects weighing as much as 30 pounds. * Kneeling, stretching, reaching, turning *The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions and perform any other related duties as assigned by their supervisor/ manager. • You should be proficient in: • Bachelor's Degree, • 5 Why (Root Cause Analysis Method), • ISO 22000, • 120/208/240/480 Voltage Systems, • CNC Programming, • CAD Software, • AS9102, • Design for Manufacturability (DFM), • Design for Assembly (DFA), • CAD/CAM Software, • AS9100 Experience, • Analysis Programs, • Bachelor's Degree, • 5 Why (Root Cause Analysis Method), • ISO 22000, • 120/208/240/480 Voltage Systems, • CNC Programming, • CAD Software, • AS9102, • Design for Manufacturability (DFM), • Design for Assembly (DFA), • CAD/CAM Software, • AS9100 Experience, • Analysis Programs, • Blueprint Reading

Job Description Are you ready to shape the future of authentication? Join 1Kosmos and help lead the next wave in identity assurance and passwordless innovation. 1Kosmos is driving the future of identity security, empowering organizations to eliminate passwords and establish trust at every step of the identity lifecycle. As a vibrant team of innovators, we develop advanced authentication solutions trusted by some of the world’s leading brands. Join us as we create a passwordless world and set new standards for digital identity assurance. We are looking for an AI / Machine Learning Engineer to design, build, and deploy advanced computer vision and AI solutions. You will work on projects involving image capture, data extraction, and fraud detection, delivering high-performance models that can run on both mobile devices and cloud environments. This role blends R&D with production engineering—you’ll take ownership of the full ML lifecycle, from dataset creation and model training to deployment and performance optimization. Key Responsibilities • Design and implement AI models for image classification, object detection, OCR, and feature extraction., • Develop real-time image quality assessment and capture guidance algorithms., • Create and maintain data pipelines for collecting, cleaning, augmenting, and labeling datasets., • Implement model optimization techniques for mobile (on-device) and cloud inference., • Apply fraud detection methods to identify tampering, forgeries, or replay attacks in visual data., • Integrate ML models into production-grade APIs and mobile SDKs., • Monitor, evaluate, and continuously improve model accuracy and performance., • Collaborate with product and engineering teams to align AI capabilities with business goals. Requirements • Bachelor’s or Master’s degree in Computer Science, AI/ML, or related field (or equivalent experience)., • 3+ years of experience building and deploying ML models in production., • Proficiency in Python and ML frameworks (PyTorch, TensorFlow, or similar)., • Experience with computer vision libraries (e.g., OpenCV) and OCR technologies., • Strong understanding of deep learning architectures for image and text recognition., • Familiarity with cloud platforms (AWS, GCP, or Azure) and API development., • Strong problem-solving skills and ability to work in fast-paced environments., • Based in the NJ / NY area; Hybrid working model.Preferred Qualifications, • Experience with model quantization and optimization for mobile deployment., • Knowledge of synthetic data generation and data augmentation techniques., • Background in security, liveness detection, or anomaly detection., • Exposure to compliance and data privacy regulations (GDPR, CCPA)., • Cutting-Edge Tech Stack: Build with decentralized identity protocols, FedRamp High, FIDO2-certified cryptography, and NIST-compliant biometric systems., • Accelerated Growth: Receive annual stipends for certifications and attend key conferences like Identiverse or EIC., • Ownership & Impact: We move fast and will enable you to make a big impact with large customers in US & Canada., • Flexibility First: Unlimited PTO, and 2 days WFH

Job DescriptionDescriptionCME Associates is seeking a Municipal Engineer to join our dynamic team in East Brunswick, NJ. As a Municipal Engineer, you will play a crucial role in the planning, design, and execution of engineering projects. You will work closely with senior engineers and project managers to ensure the successful completion of projects. If you are a highly motivated and detail-oriented engineer with a passion for problem-solving, we want to hear from you. Responsibilities • Project Support: Collaborate with senior engineers to assist in the planning and execution of engineering projects, including site assessments, feasibility studies, and design development., • Design and Analysis: Perform engineering calculations, simulations, and analyses to develop comprehensive design solutions. Ensure designs comply with industry standards and regulations., • Documentation: Prepare detailed engineering drawings, reports, and technical documentation to support project deliverables and client communication., • Quality Control: Conduct thorough quality checks on engineering designs and reports to maintain the highest standards of accuracy and compliance with client requirements., • Client Interaction: Communicate effectively with clients, contractors, and regulatory agencies to address project-related inquiries, provide updates, and facilitate project approvals. Qualifications • Bachelor's Degree: Bachelor's degree in Civil Engineering or a related field from an accredited institution., • Professional Engineer (PE) License: Must hold a valid Professional Engineer license in the state of New Jersey or the ability to obtain it within 6 months of hire., • Experience: A minimum of 3-5 years of civil engineering experience, preferably in site development, land planning, or transportation projects., • Software Proficiency: Proficient in AutoCAD, Civil 3D, and other relevant engineering software. Experience with hydraulic and hydrologic modeling software is a plus., • Communication Skills: Strong verbal and written communication skills, including the ability to convey complex technical information to clients and team members effectively. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

American energy independence with positively ingenious solutions that transform how the world stores power.

We are seeking an innovative and highly motivated Computer System Validation (CSV) Engineer who will be part of Cellares' Quality group and contribute significantly to the development of our advanced cell therapy manufacturing platform. Software Quality Engineering and/or Computer System Validation

The quality leader role is intended to lead a team that ensures the HDM business is upholding all aspects of the quality policy, quality management system (QMS). This role will be responsible for leading a group of three quality engineers and one supplier quality engineer. Qualifications: HD Microsy

The senior process engineer is expected to support the director of process engineering to manage and lead process engineers to support day to day production, to ensure and improve compliance with quality standards and safety regulations. Provide leadership and technical support to engineers to drive