Rf technician jobs in San Diego, CaliforniaCreate job alerts

Position Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive general instructions on work, applying job skills and company policies and procedures to complete a variety of tasks, and working on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. The Calibration Technician B will perform laboratory housekeeping and may be asked to report opinions and interpretations. Responsibilities and Duties 1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, 2. Maintain secondary and/or working calibration standards, 3. Perform basic maintenance, troubleshooting and repair of precision equipment, 4. Collect, compile, measure, summarize, and record data gathered during calibration, 5. Identify out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc., 6. Identify and correct measurement errors, as applicable, 7. Prepare calibration reports and certificates, 8. Adapt existing calibration equipment, standards, and techniques to accomplish unique measurement tasks for which they are not principally used, 9. Train subordinates in calibration concepts and procedures, 10. Interact with other technicians, Customer Service Representatives, Account Managers, and customers, 11. Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Must possess good written and oral, communication skills, • Basic ability to troubleshoot repair, align and optimize precision equipment, • Basic computer skills, • Proficient in use of MS Word and Excel, • Minimum one year of calibration experience some of which can be offset by formal metrology training, • Must have very good interpersonal and customer service skills, • Strong attention to details, • Must be a self motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment • Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, • Travel may be required to other domestic and possibly international locations What We Offer Full-time, exempt position, sign on bonus eligible Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement Paid time off with vacation, sick and holiday leave SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: . For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.

Overview Konica Minolta currently has an exciting opportunity for aTruck Driver / Warehouse Worker / Install Technician! • An Above Market Hourly Wage + $1,500 Sign on Bonus!, • Outstanding benefits package (including medical, dental, vision, life insurance), • Eligibility for Overtime pay, • 401(k) plan with matching company contribution, • Generous holiday and paid time off schedules, • Operates a truck to transport company goods/equipment to and from specified locations in a safe and professional manner. This includes following efficient travel routes., • Load and unload trucks safely and in accordance with specified guidelines., • Maintains records of pick up/deliveries. Accurately complete paperwork (Pick Tickets, Pick Slips, Count Sheets, etc.), • Utilize all job related equipment which may include, but is not limited to, forklift, pallet jack, computer work and Radio Frequency (RF)., • Verify inventory and assist with inventory level maintenance, • Pull/push/lift equipment of up to 50 lbs. from warehouse stock, using available resources., • Maintain cleanliness and neatness of warehouse., • Adhere to and understand safety policies and regulations, • High School Diploma or HS equivalency., • 2-3 years of related work experience., • Must possess a valid state Driver's License with a clean driving record., • Meet DOT medical requirements (Medical Card)., • MUST pass a drug screen and background check., • Physical activity required including frequent bending, reaching, lifting and standing., • Ability to work independently within established procedures as well as in a teamwork environment., • Computer proficiency with Microsoft Office programs., • Strong computer/networking skills are a plus., • Mechanical and electrical aptitude and demonstrated skills. About Us Konica Minolta Business Solutions' (Konica Minolta)journey started more than 150 years ago, with a vision to see and do things differently. The company partners with clients to Give Shape to Ideas by supporting their digital transformation through its expansive___portfolio. Its business technology offerings include IT Services, intelligent information management, video security solutions and managed print services, as well as office technology and industrial and commercial print solutions. 2025 marks Konica Minolta's 20thanniversary in production print, for which it celebrates "20 Years of Excellence, Innovation and Impact," and continues to lead the way in digital commercial printing. This year also commemorates 20 years of Konica Minolta's bizhub brand. Over the past two decades, the bizhub series has revolutionized office technology and redefined how businesses operate. It has continuously evolved to meet the needs of modern workplaces, fueled by advances in technology and a commitment to innovation. Konica Minolta is proud to be___, included on CRN's MSP 500 list numerous times; recognized as the___by Brand Keys for eighteen consecutive years and presented with Keypoint Intelligence's BLI 2025 and 2021 A3 Line of The Year and BLI 2021-2023 Most Color Consistent A3 Brand Awards for its___. For more information, please visit Konica Minolta___and follow it on___,___,. Konica Minolta operates on a North American Shared Services model, which aligns cross-border priorities and enhances delivery to its field organization. This combines service functions in the U.S. and Canada, ultimately providing more resources to support areas such assales administration, logistics and supply chain, marketing, product planning, finance, IT, HR and legal. Au sujet de Konica Minolta Solutions d'affaires Konica Minolta (Konica Minolta) a entame son parcours il y a plus de 150 ans, avec la volonte de voir et de faire les choses autrement. Elle fait equipe avec ses clients pour donner forme a leurs idees en appuyant leur transformation numerique grace a un riche portefeuille de solutions pour un milieu de travail connecte et fute. Parmi ses technologies d'affaires, on retrouve des services de TI, la gestion intelligente de l'information, des solutions de securite video et des services d'impression geres ainsi que des technologies de bureau et des solutions d'impression industrielle et commerciale. L'annee 2025 marque le 20e anniversaire de l'entree de Konica Minolta dans le marche de l'impression de production; l'entreprise souligne 20 annees d'excellence, d'innovation et de resultats tout en continuant d'etre une figure de proue dans l'impression numerique commerciale. C'est aussi l'annee ou la marque bizhub de Konica Minolta celebre ses 20 ans, au cours desquels la gamme a revolutionne la technologie de bureau, redefini les processus des entreprises, et evolue continuellement pour repondre aux besoins des milieux de travail modernes, mue par les avancees technologiques et la volonte d'innover. Konica Minolta est fiere de faire partie du palmares 2025 des meilleurs grands employeurs d'Amerique de Forbes, d'avoir figure a plusieurs reprises au palmares CRN des 500 fournisseurs de services geres, d'avoir ete nommee la marque numero un en matiere de fidelite des clients sur le marche des appareils de bureau multifonctions par Brand Keys pendant 18 annees consecutives, et de s'etre vue decerner les prix BLI A3 Line of the Year 2021 et 2025 et Most Colour Consistent A3 Brand 2021-2023 de Keypoint Intelligence pour sa gamme bizhub One i-Series. Pour en savoir plus, rendez-vous sur le site de Konica Minolta et suivez l'entreprise sur Facebook, YouTube, LinkedIn et Twitter. Konica Minolta fonctionne selon un modele de services partages nord-americain qui permet d'harmoniser les priorites transfrontalieres et d'ameliorer la prestation de services aux organisations operationnelles. Le modele combine des fonctions de service americaine et canadienne afin d'offrir davantage de ressources aux services de soutien comme l'administration des ventes, la logistique et la chaine d'approvisionnement, le marketing, la planification des produits, la finance, les TI, les RH et les services juridiques. EOE Statement Konica Minolta is an equal opportunity and affirmative action employer. We consider all qualified applicants for employment without regard to race, color, religion, creed, national origin, sex, pregnancy, age, sexual orientation, transgender status, gender identity, disability, alienage or citizenship status, marital status or partnership status, genetic information, veteran status or any other characteristic protected under applicable law. Konica Minolta Business Solutions (Canada) Ltd. is an equal opportunity employer. Solutions d'affaires Konica Minolta (Canada) Ltee. est un employeur d'opportunite egale.

Job Title: Engineering Technician D. L3Harris in San Diego, CA is seeking an experienced RF engineering technician to support the design and manufacturing of Tracking, Telemetry, and Command (TT&C) products for airborne and space-based applications. As an RF technician, you will be directly involved

As an RF technician, you will be directly involved in the. Serve as liaison between engineering and production teams during new product introduction Ability to obtain a DOD Secret security clearance Required Qualifications (one of the following):.

Job Description DUTIES AND RESPONSIBILITIES The Electronics Technician Maintenance II applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician. Experience performing overhauls and repairs on any of the following shipboard electronics systems: High Frequency (HF), Radio Frequency (RF), High Frequency Radio Group (HFRG), Digital Modular Radio (DMR), Navy Multiband Terminal (NMT), Tactical Air Navigation System (TACAN), Electronic Support Measures (ESM), or Naval Shipboard Antenna Systems. Operational knowledge of URN-25, WSC-3, USQ-122, SSR-1, URT-23, DAMA, WRL-8, STC-2 a plus. REQUIRED SKILLS/YEARS OF EXPERIENCE Five (5) years recent C4ISR or other relevant experience in troubleshooting, maintenance, repair, installation and deinstallation of electronic systems, equipment, components, antennas, cables, cableways, waveguides and ducts, while using logic analyzers and digital oscilloscopes. Education: High School Travel Required: 0% Work Location: San Diego, CA This position is required to have and maintain a Secret US DoD security clearance. PREFERRED SKILLS Quality Management System (QMS) experience that is compatible with ISO 9001:2008 and 2015. REMARKS Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Compensation: $36.25 - $50 an hour. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR 927ZY41uAY

Job Description Mount Indie is looking for a dynamic, detail-oriented Lead Test Technician to join an energetic and growing team! In this role, you will lead the production loading and testing of all company systems. This is an innovative, design-driven environment that delivers elegant engineering solutions. What you’ll do: • Schedule and execute test activities to ensure tasks are completed efficiently., • Mentor junior technicians on proper test methodology and practices., • Serve as the liaison between engineering and production to incorporate new test procedures, fault isolation and root cause analysis., • Document test procedures for new products during productization phase., • Perform verification and validation of production test procedures., • Diagnose, fix, and troubleshoot complex technical issues in systems or components., • Install and maintain test equipment, fixtures, and software., • Enforce proper lab practices and protocols, including ESD, FOD control and tool control., • Collect, analyze, and interpret test data to assist in trend analysis and design improvements., • Improve existing system/subsystem level test procedures through redline and change order processes., • Collaborate with production and engineering to improve test processes, rigor and workflows., • Completes technical assessment of company products and customer RMAs, to include PCBAs and electronic components., • Perform test set-up and test execution of various product and product lines., • Experience working in production test on one or more product lines, including system and subsystem level testing., • Strong ability to troubleshoot and diagnose failures. Provides technical corrective actions for non-conforming material., • Keen attention to detail and superb communication and documentation skills., • Ability to learn fast and manage tasks based on priority., • Capable of operating test equipment such as digital multi-meters (DMMs), oscilloscopes, and power supplies., • Familiarity with Linux operating systems., • Background in hands on experience working with avionics LRUs and subassemblies., • Ability to recognize test equipment failures and determine the need for appropriate corrective action., • Strong ability to read and understand schematics, system diagrams and technical documentation., • Experience with various system software loading and system configuration., • Basic troubleshooting of electrical circuits, • Basic understanding of RF principles, waveforms, antennas, radios, etc., • Experience with supporting scaling testing for product lines., • Technical leadership experience., • Experience with software deployment from server-hosted repository., • Knowledge of PCB and cable assembly fabrication and repair techniques., • Experience with Virtual Machines, Cisco routers, and Palo Alto firewalls., • Working knowledge of networking protocols and Linux DevOps processes including writing Python and Bash deployment scripts and setting up automated testing using Jenkins and Gitlab, • Demonstrated experience with Linux OS (RHEL, CentOS), • Experience with DoD Security Technical Implementation Guidelines, • Strong technical network troubleshooting skills with the ability to trace technical issues within multiple systems, • Experience configuring RHEL PXE boot Kickstart servers and creating custom Kickstart scripts for both Legacy and UEFI BIOS systems, • Knowledge of open-source technologies and protocols, • Experience with loading and updating firmware for embedded systems

Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations. Responsibilities and Duties • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, • Maintain primary and/or intrinsic calibration standards, • Maintain secondary and/or working calibration standards, • Perform maintenance, troubleshooting and repair of precision equipment, • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements, • Collect, compile, measure, summarize, and record data gathered during calibration., • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc, • Identify and correct measurement errors, as applicable, • Prepare calibration reports and certificates, • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used, • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes, • Train subordinates in calibration concepts and procedures, • Interact with other technicians, Customer Service Representatives, Account Managers, and customers, • Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Understanding of Basic Statistics, • Must possess good written and oral, communication skills, • Technical writing ability, • Intermediate ability to troubleshoot repair, align and optimize precision equipment, • Intermediate computer skills, • Proficient in use of MS Word and Excel, • Minimum three years of calibration experience some of which can be offset with formal metrology training, • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540), • Must have great interpersonal and customer service skills, • Strong attention to details, • Must be a self-motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer • Full - Time, non-exempt position, • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement, • Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies: SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.

Job Description Overview When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields – each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences – then Chugach Government Solutions may be the right fit for you! Responsibilities Provide Support to fleet customers, including other engineers, technicians from other government agencies such as the Regional Maintenance Center (RMC) by providing timely information and technical assistance through established processes relative to government’s request. Maximize resource capacity and availability to deliver subservices including Distance Support, Onsite Support, and Proactive Support. Document or assist in documenting all issues, resolutions, and requests for information using the established process of the DDG 1000 Help Desk. Salary range: $70,000 - $98,000/yr. This position is always open. Resumes will be accepted even when there are no openings. Qualifications Essential Duties & Job Functions: • Assist fleet customers, engineers, technicians, and other personnel via distance support (phone and email) to resolve issues and provide support as requested by the customer. If unable to resolve the issue by distance support, on-site support may be the next step., • Plan and execute on-site restorative actions to restore the system to operational condition through equipment configuration, coordination with distant end, or part replacement with available Government Furnished Equipment (GFE) The contractor shall identify and isolate problems; inspect and repair systems and equipment; test and evaluation; perform system checkout; provide informal training; update documentation; and perform in- briefs and out-briefs of accomplishments to the ship’s crew and other fleet support customers. The restorative actions may involve troubleshooting interfaces and peripheral systems to resolve SSC-15 Interoperability issues. Interfaces to include but not limited to the modems, Common Array Equipment (CAE), Common Display System (CDS), Total Ship Computing Environment (TSCE), Integrated Communications Control (ICC), Advanced Digital Network System (ADNS), and Global Broadcast Service (GBS), Navy Multiband Terminal (NMT), Digital Modular Radio (DMR), Advanced Time Division Multiple Access (TDMA) Interface Processor (ATIP)., • Perform equipment grooms, onboard training and participate in required Fleet events. (Up to Secret), • Provide on-site support while The contractor’s personnel shall be capable of riding the ship for short periods., • Verify, test, and validate new software related to the system in accordance with government approved (Up to Secret), • Submit and review Software Trouble Reports (STR) / Hardware Trouble Reports (HTR) for any issues found onboard during site support activities. Documented resolutions for STR and HTR issues will also be recorded against any associated trouble tickets., • Provide a situational report of actions taken and results upon conclusion of the on-site support in contractor, • Support the transition of SSC-15 to the Government., • Other related duties as assigned.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Fuse is looking for a dynamic, detail-oriented Lead Test Technician to join our energetic and growing team! This is an opportunity to work closely with production, quality, and engineering in a pivotal role to delivering Fuse’s solutions to warfighters. In this role, you will lead the production loading and testing of all Fuse systems. Fuse is an innovative, design-driven environment that delivers elegant engineering solutions. Must be a nimble self-starter who is excited about technology and has the ability to think out of the box and suggest powerful new ideas. Fuse values a creative and dynamic work environment – if this sounds good to you, then we are looking forward to hearing from you! What you’ll do: • Schedule and execute test activities to ensure tasks are completed efficiently., • Mentor junior technicians on proper test methodology and practices., • Serve as the liaison between engineering and production to incorporate new test procedures, fault isolation and root cause analysis., • Document test procedures for new products during productization phase., • Perform verification and validation of production test procedures., • Diagnose, fix, and troubleshoot complex technical issues in systems or components., • Install and maintain test equipment, fixtures, and software., • Enforce proper lab practices and protocols, including ESD, FOD control and tool control., • Collect, analyze, and interpret test data to assist in trend analysis and design improvements., • Improve existing system/subsystem level test procedures through redline and change order processes., • Collaborate with production and engineering to improve test processes, rigor and workflows., • Completes technical assessment of company products and customer RMAs, to include PCBAs and electronic components., • Perform test set-up and test execution of various product and product lines. We are looking for: • Experience working in production test on one or more product lines, including system and subsystem level testing., • Strong ability to troubleshoot and diagnose failures. Provides technical corrective actions for non-conforming material., • Keen attention to detail and superb communication and documentation skills., • Ability to learn fast and manage tasks based on priority., • Capable of operating test equipment such as digital multi-meters (DMMs), oscilloscopes, and power supplies., • Familiarity with Linux operating systems., • Background in hands on experience working with avionics LRUs and subassemblies., • Ability to recognize test equipment failures and determine the need for appropriate corrective action., • Strong ability to read and understand schematics, system diagrams and technical documentation., • Experience with various system software loading and system configuration., • Basic troubleshooting of electrical circuits, • Basic understanding of RF principles, waveforms, antennas, radios, etc. Nice to have: • Experience with supporting scaling testing for product lines., • Technical leadership experience., • Experience with software deployment from server-hosted repository., • Knowledge of PCB and cable assembly fabrication and repair techniques., • Experience with Virtual Machines, Cisco routers, and Palo Alto firewalls., • Working knowledge of networking protocols and Linux DevOps processes including writing Python and Bash deployment scripts and setting up automated testing using Jenkins and Gitlab, • Demonstrated experience with Linux OS (RHEL, CentOS), • Experience with DoD Security Technical Implementation Guidelines, • Strong technical network troubleshooting skills with the ability to trace technical issues within multiple systems, • Experience configuring RHEL PXE boot Kickstart servers and creating custom Kickstart scripts for both Legacy and UEFI BIOS systems, • Knowledge of open-source technologies and protocols, • Experience with loading and updating firmware for embedded systems More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Salary Range: $75,000 - $100,000 Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description DUTIES AND RESPONSIBILITIES The Electronics Technician Maintenance III applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower-level technicians. Experience performing overhauls and repairs on any of the following shipboard electronics systems: High Frequency (HF), Radio Frequency (RF), High Frequency Radio Group (HFRG), Digital Modular Radio (DMR), Navy Multiband Terminal (NMT), Tactical Air Navigation System (TACAN), Electronic Support Measures (ESM), or Naval Shipboard Antenna Systems. Operational knowledge of URN-25, WSC-3, USQ-122, SSR-1, URT-23, DAMA, WRL-8, STC-2 a plus. REQUIRED SKILLS/YEARS OF EXPERIENCE Six (6) years recent C4ISR or other relevant experience in troubleshooting, maintenance, repair, installation and deinstallation of electronic systems, equipment, components, antennas, cables, cableways, waveguides and ducts, while using logic analyzers and digital oscilloscopes. Education: High School Travel Required: 0% Work Location: San Diego, CA This position is required to have and maintain a Secret US DoD security clearance. PREFERRED SKILLS Quality Management System (QMS) experience that is compatible with ISO 9001:2008 and 2015. REMARKS Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Compensation: $38.50-$55 an hour. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR gzuU60pBPj

Job Description Position Overview The Calibration Technician C (with a focus in RF), will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations. Responsibilities and Duties • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, • Maintain primary and/or intrinsic calibration standards, • Maintain secondary and/or working calibration standards, • Perform maintenance, troubleshooting and repair of precision equipment, • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements, • Collect, compile, measure, summarize, and record data gathered during calibration., • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc, • Identify and correct measurement errors, as applicable, • Prepare calibration reports and certificates, • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used, • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes, • Train subordinates in calibration concepts and procedures, • Interact with other technicians, Customer Service Representatives, Account Managers, and customers, • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Understanding of Basic Statistics, • Must possess good written and oral, communication skills, • Technical writing ability, • Intermediate ability to troubleshoot repair, align and optimize precision equipment, • Intermediate computer skills, • Proficient in use of MS Word and Excel, • Minimum three years of calibration experience some of which can be offset with formal metrology training, • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540), • Must have great interpersonal and customer service skills, • Strong attention to details, • Must be able to lift up to 45 pounds without assistance, • Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, • Full - Time, non-exempt position, • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: . For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.

Job Description DUTIES AND RESPONSIBILITIES The Electronics Technician Maintenance 1 applies basic technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician. Experience performing overhauls and repairs on any of the following shipboard electronics systems: High Frequency (HF), Radio Frequency (RF), High Frequency Radio Group (HFRG), Digital Modular Radio (DMR), Navy Multiband Terminal (NMT), Tactical Air Navigation System (TACAN), Electronic Support Measures (ESM), or Naval Shipboard Antenna Systems. Operational knowledge of URN-25, WSC-3, USQ-122, SSR-1, URT-23, DAMA, WRL-8, STC-2 a plus. REQUIRED SKILLS/YEARS OF EXPERIENCE Two (2) years recent C4ISR or other relevant experience in troubleshooting, maintenance, repair, installation and deinstallation of electronic systems, equipment, components, antennas, cables, cableways, waveguides and ducts, while using logic analyzers and digital oscilloscopes. This position is required to have and maintain a Secret US DoD security clearance. PREFERRED SKILLS Quality Management System (QMS) experience that is compatible with ISO 9001:2008 and 2015. REMARKS Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Compensation: $34.25 - $41.00 an hour. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR lP99TAj9KV

Job Description Position Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive general instructions on work, applying job skills and company policies and procedures to complete a variety of tasks, and working on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. The Calibration Technician B will perform laboratory housekeeping and may be asked to report opinions and interpretations. Responsibilities and Duties 1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, 2. Maintain secondary and/or working calibration standards, 3. Perform basic maintenance, troubleshooting and repair of precision equipment, 4. Collect, compile, measure, summarize, and record data gathered during calibration, 5. Identify out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc., 6. Identify and correct measurement errors, as applicable, 7. Prepare calibration reports and certificates, 8. Adapt existing calibration equipment, standards, and techniques to accomplish unique measurement tasks for which they are not principally used, 9. Train subordinates in calibration concepts and procedures, 10. Interact with other technicians, Customer Service Representatives, Account Managers, and customers, 11. Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Must possess good written and oral, communication skills, • Basic ability to troubleshoot repair, align and optimize precision equipment, • Basic computer skills, • Proficient in use of MS Word and Excel, • Minimum one year of calibration experience some of which can be offset by formal metrology training, • Must have very good interpersonal and customer service skills, • Strong attention to details, • Must be a self motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment • Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, • Travel may be required to other domestic and possibly international locations What We Offer Full-time, exempt position, sign on bonus eligible Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement Paid time off with vacation, sick and holiday leave SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: . For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.

Job Description Q Microwave, a leader in the precision RF manufacturing, design and manufacture of cutting-edge military and defense microwave solutions, is seeking a Production Electronics Technician to join our entrepreneurial, collaborative, and fast-paced team located in El Cajon, CA. Q Microwave is recognized for its advanced capabilities in RF filtering and custom RF subassembliestechnologies that require deep technical knowledge and a passion for precision. Our fully vertically integrated facility in San Diego enables close collaboration between design and manufacturing, ensuring unmatched quality and performance in RF product development. As a part of Amphenol's global network of over 130 business units, Q Microwave operates with the technical focus and agility of a specialized design center while leveraging the strength, stability, and resources of one of the world's largest interconnect solution providers. The Production RF Technician is responsible for the tuning, performance verification, and troubleshooting of RF Filter and RF Sub-Systems (Integrated Microwave Assemblies), using established standard work and test procedures. Will be responsible for meeting production line tact times. May be responsible for training fellow RF Technicians, or newly hired RF Technicians. Requirements: • Must be a US Citizen, • High School Degree and 4 years of prior related experience., • Associate's degree or Technical Certificate from an accredited school or college and 0-2 years of prior related experience., • Equivalent military electronics training., • This position conducts full Acceptance Testing of RF Filters and RF Sub-Systems (Integrated Microwave Assemblies), using established test procedures., • This position will utilize test equipment which includes but not limited to oscilloscope, spectrum analyzer, DMM, power supply, network analyzer, signal generators, and automated test equipment., • Position requires the ability to work in a dynamic and fast-paced environment with focus on quality and attention to detail., • Daily tasks will often include helping lower-level technicians with tuning, testing, and troubleshooting to help ensure production goals are being met., • Daily tasks will often include but, may not be limited to, tuning, testing, and troubleshooting RF, digital and/or analog top assemblies with little or no supervision., • Daily tasks may include reviewing and updating test procedures and standard work., • Ability to read schematic diagrams, electronic assembly drawings, engineering change orders, test procedures and rework documents., • Strong working knowledge of basic electronic theory and electronic test equipment (i.e. spectrum analyzer, oscilloscopes, power supply, etc.)., • Interface with Engineers for new product implementation or design issues., • Demonstrate computer literacy., • Must be detail oriented, organized, punctual, have patience to work with very small parts using a microscope (mandatory) and able to work in a fast-paced environment as part of a team. Good attitude and willing to learn new things every day., • Ability to lift 2550 lbs. of test equipment with assistance., • Fast-paced environment with frequent interaction with supervisors., • Work in a collaborative environment with growth opportunities., • Be part of a supportive team focused on quality and efficiency., • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Ready to take the next step in your career? Apply today!

Job DescriptionSalary: $21.12 - $39.00 Position Title: Electronic Technician I, II, III Work Location: San Diego, CA FLSA Status: Full-Time, Non-Exempt REQ#26_01136C Summary of Duties The Electronic Technician (I, II, III) must possess minimum higher educational requirements, a thorough understanding of electricity/electronics, basic/accelerated wiring skills, the use of common/specialty hand tools and the use of general purpose test equipment. Tasks are accomplished as assigned by the Installation Supervisor and in accordance with company work instructions/NAVSEA standard items. Periodically required to lift/move equipment up to and including 50 pounds. Additional duties and/or responsibilities of other positions may also be assigned for which qualifications are met to include Installation Supervisor on routine or low risk installations. Specific Description of Duties - Responsible for assisting in electrical/electronic installations, wiring of assemblies, and troubleshooting of cabling and equipment. Additional responsibilities could include opening as well as closing cableways, cable trunks, and multi cable transits; transporting material/tools to and from the worksite; standing fire watch; painting; lagging; and assisting in weld preparation/fit up. Must be extremely familiar with systems removal and installation to include but not limited to: *HVAC ducting, piping, etc. • Cabling (copper and fiber), • Equipment racks, • Lockers/Furniture, • Fiddle boards, • Connection boxes, • Power panels, • Lighting, • Antennas/Radomes, • Foundations, • Waveguide, • Decking, • Multi pin/Fiber Optic/RF and other type connectors., • Cable tags/Wire markers., • Problem Solving/Troubleshooting., • Provide installation assistance during SOVT., • Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organization's mission, objectives and goals., • Overtime is routinely required but not guaranteed., • Travel outside the local area may be required. Education/Specialized Training - Level I: High School diploma or GED may be mandatory depending on contract stipulations. Associates degree or Bachelors degree in relatable electrical/electronic field. Military schooling, depending on scope and relevance of training, may also suffice. Non-degreed personnel may qualify, depending on depth of electrical/electronic knowledge and experience, however, must have a minimum of four (4) years technical experience in installation, modification, field change, systems operation, maintenance, testing, troubleshooting and or repair of various military combat systems. Level II: High School diploma or GED may be mandatory depending on contract stipulations. Associates degree or Bachelors degree in relatable electrical/electronic field with two (2) years practical hands on experience. Military schooling, depending on scope and relevance of training, may also suffice. Non-degreed personnel may qualify, depending on depth of electrical/electronic knowledge and experience, however, must have a minimum of five (5) years technical experience in installation, modification, field change, systems operation, maintenance, testing, troubleshooting and or repair of various military combat systems. Level III: High School diploma or GED may be mandatory depending on contract stipulations. Associates degree or Bachelors degree in relatable electrical/electronic field with four (4) years practical hands on experience. Military schooling, depending on scope and relevance of training, may also suffice. Non-degreed personnel may qualify, depending on depth of electrical/electronic knowledge and experience, however, must have a minimum of six (6) years technical experience in installation, modification, field change, systems operation, maintenance, testing, troubleshooting and or repair of various military combat systems. Security Clearance - Clearance up to Secret level may be required. Certifications/Licenses (as required for the task being performed) - Cableway certification. Multi-pin connector certification. Fiber Optic connector certification. Fire watch certification. Physical/Environmental Job Requirements - Lifting/moving up to and including 50 pounds. Routinely climbing several flights of stairs. Performing tasks in confined spaces. Our work is primarily onboard naval vessels that may include variables of physical activity, i.e. stooping, climbing, walking, etc. In performing these duties, you may be required to work outdoors. You will experience temperature variations, extremely loud noises and other physical hazards. Company Overview - Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email or call: 757-460-8800. To Apply: Visit click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Job Description Join our fast‑paced and passionate team as an Electronics Technician 4. As we scale, you will play a critical role in building our hardware foundation from the ground up. This is a dynamic, hands‑on position for a highly skilled technician who thrives in a fluid startup environment. You’ll work closely with engineers and leadership, support development of cutting‑edge technologies, and help establish best practices that enable our mission and growth. You will be expected to work independently, communicate proactively, and mentor junior technicians while owning complex technical tasks from prototype build to system‑level testing. • Work independently and collaboratively while maintaining clear, proactive communication with engineers, project leads, and teammates. Mentor junior technicians as needed., • Execute complex technical tasks including test setup, data collection, troubleshooting, and documentation, following established processes and participating in peer reviews., • Apply tenacity, patience, and strong attention to detail to ensure accuracy in test execution, data integrity, adherence to best practices, and clarity in documentation., • Associate degree in electronics, engineering technology, or a related field; equivalent military or industry experience considered., • Minimum of 7 years of relevant hands‑on electronics technician experience, ideally within a startup, R&D lab, or technology company., • Experience assembling, testing, and troubleshooting RF and mixed‑signal circuits in the 200 MHz to 20 GHz range., • Experience with low‑noise measurement techniques and sensitive analog circuitry., • Experience working with RF test equipment (VNAs, spectrum analyzers, signal generators, power meters)., • Experience with PCB rework, including fine‑pitch soldering, component replacement, and hardware modification., • Familiarity with Altium Designer or similar tools for viewing schematics and PCB layouts is a plus. Skills: • Strong understanding of analog, mixed‑signal, and RF hardware operation., • Ability to interpret electrical schematics, PCB layouts, and engineering documentation., • Proficiency in setting up and executing test procedures, including calibration and data capture., • Knowledge of RF measurement techniques, impedance matching concepts, and best practices for high‑frequency testing., • Skilled in diagnosing hardware failures and assisting engineers in root‑cause analysis., • Comfortable maintaining BOMs, test logs, and build documentation with high accuracy., • Ability to build high-quality, low-noise cabling for testing and for product builds. Duties and Responsibilities: • Support engineers in building, assembling, and validating electronic systems, subsystems, and prototypes., • Perform hands‑on testing, measurement, and characterization of RF, analog, and mixed‑signal circuits., • Document test setups, procedures, and results with clarity and precision., • Assist with schematic review, PCB layout review, and design verification activities., • Perform PCB rework, including soldering, component swaps, and hardware modifications., • Maintain lab equipment, ensure calibration schedules are met, and uphold safe lab practices., • Interface with PCB vendors and manufacturing partners to verify build quality and resolve issues., • Lead troubleshooting efforts and contribute to root‑cause analysis and corrective action development., • Prepare and execute test plans, including data collection, analysis, and reporting., • Mentor junior technicians and support cross‑functional collaboration with engineering teams., • Perform other related duties as required. Startup Mindset: • You’re adaptable, resourceful, and energized by working in a fast‑moving environment., • You’re comfortable wearing multiple hats and contributing wherever needed. The expected annual salary range for this position is $40/hour to $58/hour ($83,000 –$120,000) As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job DescriptionSalary: $21.12 - $35.00 Position Title: Installation Technician I, II, III Work Location: San Diego, CA FLSA Status: Full-Time, Non-Exempt REQ#26_01136D Summary of Duties The Installation Tech (I, II, III) possesses a basic understanding of NAVSEA installation processes and the use of common hand and power tools. Tasks are accomplished as assigned by the Installation Supervisor or under the supervision of a senior installation team member and in accordance with company work instructions. Periodically required to lift/move equipment up to and including 50 pounds. Additional duties and/or responsibilities of other positions may also be assigned for which qualifications are met. Specific Description of Duties - • Responsible for opening as well as closing cableways, cable trunks, and multi cable transits; transporting material/tools to and from the worksite; standing fire watch; painting; lagging; and assisting in weld preparation/fit up., • Must be familiar with systems removal and installation to include but not limited to:, • HVAC ducting, piping etc., • Cabling (copper and fiber), • Equipment racks, • Lockers/Furniture, • Fiddle boards, • Connection boxes, • Power panels, • Lighting, • Antennas/Radomes, • Foundations, • Waveguide, • Decking, • Multi pin/Fiber Optic/RF and other type connectors., • Cable tags/Wire markers., • Problem Solving/Troubleshooting., • Provide installation assistance during SOVT., • Overtime is routinely required but not guaranteed., • Travel outside the local area may be required., • Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organizations mission, objectives and goals. Education/Specialized Training - Level I: HS diploma or GED may be required depending on varying contract stipulations. Associates degree or trade school certificate (in related field), or 12 months related experience. Level II: HS diploma or GED may be required depending on varying contract stipulations. Apprenticeship, or Associates degree or Trade School certificate in related field with one year directly relatable experience. Non-degreed or non-Trade School graduates must have 2.5 years technical experience in installation, modification, field change, operation, maintenance, testing, troubleshooting and or repair of various military combat systems. Level III: HS diploma or GED and Apprenticeship, Associates degree or trade school certificate in related field and four (4) years related experience. Military schooling, depending on scope and relevance of training, may also suffice. Non-degreed or non-Trade School graduates must have five (5) years technical experience in installation, modification, field change, operation, maintenance, testing, troubleshooting and or repair of various military combat systems. Certifications/Licenses - Cable-way certification Fiber Optic Connector certification Multi-pin Connector certification Fire Watch certification Security Clearance - Clearance up to Secret level may be required. Physical/Environmental Job Requirements - Lifting/moving up to and including 50 pounds Routinely climbing several flights of stairs Performing tasks in confined spaces Our work is primarily onboard naval vessels that may include variables of physical activity, i.e. stooping, climbing, walking, etc. In performing these duties, you may be required to work outdoors or in the warehouse. You will experience temperature variations, extremely loud noises, and other physical hazards. Company Overview - Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email or call: 757-460-8800. To Apply: Visit click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Job Description Founded in 2015, Global Air Logistics and Training, Inc. (GALT Aerospace) a rapid innovator, solving the world's critical security challenges to enable warriors to win...decisively. GALT Aerospace subscribes to Col John Boyd's tenet "Wars are won by people, ideas and equipment, IN THAT ORDER." Warfighters need tools (equipment) that are flexible. GALT Aerospace will always satisfy the warfighter with such tools. GALT Aerospace provides simple, effective information capabilities to support all levels of war and drive information to the lowest levels possible, enabling faster decision cycles and decisive results. GALT Aerospace uniquely focuses on architecture solutions, effective open systems integration, and rapid prototyping, fielding, and operations. At GALT Aerospace, employees have incredible opportunities to work on revolutionary and nationally relevant systems. GALT Aerospace looks for people who align with its Core Values: • The Right Thing:, • We work on important things that we are passionate about and will make a difference for the US National Security., • We are ethical and forthright and expect the same from our employees., • We operate with integrity in all things; we do the RIGHT THING., • Trust and Respect:, • We always strive to earn and foster trust., • We Act and communicate with respect., • We foster mutually beneficial relationships., • Add Value:, • We take ownership of our tasks and deliver results to our customers, partners and each other., • We champion individual expertise, creativity, and accomplishments. San Diego, CA. On-site, with possible occasional telecommuting. Minimal domestic travel required 15%-30% of the time. Job Description GALT Aerospace is looking for a full-time Engineering Technician to join our Integration and Test team. In this position, you will be the "hands-on" partner to our Systems Engineer Integration and Test (SEIT) team. You will play a crucial role in bridging the gap between digital network configuration and physical RF execution in both the System Integration Lab (SIL) and during live developmental testing in the field. Your day-to-day responsibilities will include: • Systems Integration: Support SEITs in the physical setup and logical configuration of networked communication nodes., • RF Validation: Perform hardware-level RF testing, including measuring VSWR and Insertion Loss to ensure signal integrity across the gateway architecture., • Lab Operations: Maintain the SIL environment; rack-mount servers, route RF/ethernet cabling, and manage the calibration of test assets., • Test Support: Assist in executing test cards during lab and field events; monitor system health logs and perform real-time hardware/software troubleshooting., • System Imaging: Capture and deploy system images (Windows/Linux) to gateway hardware and tactical radios., • Mission Planning: Assist in the physical loading of cryptographic keys and mission plans into tactical radio systems (Link 16, TTNT, etc.)., • Systems Administration: 2+ years of experience maintaining Linux and Windows environments, including CLI proficiency., • RF Proficiency: Working knowledge of RF signal flow and hands-on experience with Spectrum Analyzers, Power Meters, and VNAs., • Networking Fundamentals: Solid understanding of routing, switching, VLANs, and IP subnetting., • Hardware Maintenance: Experience with server hardware, tactical radio systems, and MIL-SPEC cabling., • Field Aptitude: Ability to troubleshoot complex systems under pressure in austere or flight-line environments., • Education: Associate's degree in a STEM field with 4+ years of relevant technical experience, or a bachelor's degree in a STEM field with 1+ year of experience; equivalent professional or military experience will be considered in lieu of a degree., • Tools: Proven experience in system-level event management and fault isolation, utilizing Wireshark or similar protocol analyzers to diagnose network communication issues and validate data bus integrity., • Tactical Data Links: Familiarity with military communication systems (CDL, L-16, SADL)., • Automation: Basic familiarity with Python, Bash, or Ansible to assist in automated test execution., • Must be able to carry 50 pounds, • Must be able to sit or stand for 8 hours at a time Job Posted by ApplicantPro