Trabajos thread en Houston, TexasCrear alertas

Job Description Manufacturing Operator – Houston Plant (Multiple Departments) Full-Time | Climate varies by department | Hands-on, fast-paced environment About the Opportunity We’re hiring reliable, hands-on Manufacturing Operators to support production in several departments at our Houston plant, including GBW, Vinyl, Wire Draw, and Weaving. If you enjoy mechanical work, staying active throughout the day, and being part of a team that values safety, quality, and growth — this could be the perfect fit. We train you on the job and help you build your skills over time. Many of our operators grow into advanced roles with higher pay and expanded responsibilities. What You’ll Do Depending on the department, you may: • Operate, adjust, or support machinery in a fast‐paced production environment., • Use basic hand tools and learn measurement tools such as micrometers and gauges., • Move, inspect, or prepare wire, metal materials, or finished products., • Thread, load, or remove product from machines., • Perform simple troubleshooting, safe line stops, or basic adjustments after training., • Maintain a clean, organized work area while following all safety procedures., • Rotate between stations or machine areas (department dependent). What Makes Someone Successful Here From all four departments, successful operators share these strengths: Hands-On & Mechanical • Comfortable using tools and learning new mechanical tasks., • Curious about machinery, equipment, and production processes. Safety-Focused • Follows PPE requirements, understands hazards, and reports concerns immediately., • Works carefully around heat, moving machinery, or rotating equipment. Physically Ready • Able to stand for 12 hours., • Comfortable working in hot or noisy industrial environments., • Can lift/move materials such as wire stands. Reliable & Coachable • Shows consistent attendance and teamwork., • Pays attention to detail and follows instructions. Basic Requirements • Experience in manufacturing, warehouse, construction, or other hands-on labor is helpful — but we will train motivated candidates., • Ability to work a 12‐hour shift schedule (AM/PM depends on department)., • Willingness to learn micrometers, measurements, and wire identification (trainable). Why Join Us • Full training provided, • Opportunities to grow into advanced operator levels, • Fast-paced, team-oriented environment, • Safety-first culture, • Competitive pay & overtime opportunities Starting pay is $15–$16/hr with consistent hours and a clear progression plan that increases your pay as you build new skills. \nCompany Description About Merchants Metals We’re one of the largest manufacturers and distributors of fence systems in North America. With 35 distribution center locations, four manufacturing facilities, and a 60-year legacy of providing quality fencing and accessories, Merchants Metals continues to be the contractor and architect choice for excellence. Our complete line of products includes perimeter security solutions for industrial, commercial, and residential applications. About Merchants Metals\n\nWe’re one of the largest manufacturers and distributors of fence systems in North America. With 35 distribution center locations, four manufacturing facilities, and a 60-year legacy of providing quality fencing and accessories, Merchants Metals continues to be the contractor and architect choice for excellence. Our complete line of products includes perimeter security solutions for industrial, commercial, and residential applications.

Job Description Pipefitter and TIG Welder Pay: $25 per hour, DOE Shift: Day shift Location: Pasadena, TX Integrity Trade Services is hiring a Pipefitter with TIG Welding experience to start IMMEDIATELY at $25/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities Cut, thread, and hammer pipe to specifications using saws, torches, and pipe threaders Attach pipes to walls, structures, and fixtures with brackets, clamps, or welding Measure and mark pipes for cutting and threading Plan pipe system layout, installation, or repair according to specs Modify, clean, and maintain pipe systems and related equipment Perform TIG welding on steel and metal components according to blueprints, work instructions, and weld specifications. Read and interpret blueprints, weld symbols, and fabrication drawings to ensure accurate production. Set up and adjust welding equipment, including gas flow, voltage, and machine settings. Inspect completed welds for quality, strength, and compliance with required standards. Maintain an organized and safe work area Be adaptable to working across multiple facility locations within Pace’s geographic layout Keep detailed documentation such as logs, manuals, blueprints, and inventory records Conduct routine inspections and calibrations ensuring systems operate efficiently and safely Qualifications High school diploma or GED; technical training or certifications preferred Experience working in maintenance with a chemical batch plant highly preferred At least 2-3 years of related experience High school diploma or equivalent Ability to lift up to 50 lbs and stand for long periods Must pass a TIG weld test Experience with Tools required for pipe fitting Skills Instrument Technician Pipe fitting, layout, and installation Welding and torch cutting Pipe threading, bending, and support installation Pipe system inspection and modification Use of hand and power tools Why choose Integrity Trade Services At Integrity Trade Services, we value our employees by offering a competitive weekly paycheck and a comprehensive benefits package, including medical, dental, and vision insurance. Join a reputable company that prioritizes safety, fairness, and career development. Interested? Click Apply and check your email for follow-up instructions to complete your candidate profile with us. Please call or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #ZR #HIGH1

Job Description Cleaver Brooks Sales and Service is looking for a Boilermaker to join our team in Houston, TX. The Boilermaker assembles boilers, tanks, vats, and pressure vessels according to blueprint specifications. Has exceptional skill using power tools and hand tools. Reads blueprint to determine location and relationship of parts. Must have minimum three years experienced in boilers or HVAC, piping skills, pipe fitting, assembly of boilers, tanks, vats, and pressure vessels according to blueprint specifications or manuals, using power tools and hand-tools. Researches technical drawings/diagrams/materials to ensure appropriate parts pulled for a specific job. Be able to work with others. Be a team player with good communication skills and writing skills. Have an understanding of maintenance and interpretation of job scopes. Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Job Location: Houston, TX Essential Functions: Boilermaker: • Assembles boilers, tanks, vats, and pressure vessels according to blueprint specifications, using power tools and hand tools: Reads blueprint to determine location and relationship of parts. Connects fire tubes to heads or water tubes to drums and headers of boilers, by expanding and belling ends, using tube expander and beading ends, using power hammer. Drills and taps holes for installation of studs, using portable drill. Tightens bolts to assemble frames, using hand or power wrenches. Mounts casings of water tube boilers, or attaches davit heads, burners, or furnace casing to fire tube boilers, using wrenches. Bolts or screws accessories, such as man-holes, hand-holes, fans, gauges, and valves to vessel, using hand tools or power wrenches. Replaces defective parts or piping, using power wrenches, prying bars, or hand tools. May install and repair refractory brick or furnace tile. May thread and install pipe, using pipe wrench and dies. May remove and replace insulation and caulk seams to repair insulation on shells, piping, boiler fire-sides or structures. May cut out defective parts, boiler tubes or tube ends using acetylene torch., • This is not a "bolt-up" position. Pipefitter: • Piping Lay out, fabricates, assembles, installs, and maintains piping and piping systems, fixtures, and equipment for boiler systems by threading or by sweating copper pipe or pro-press fittings., • Typical Duties: Selects type and size of pipe and related materials according to job specifications. Inspects worksites to determine presence of obstructions and to ascertain that piping integrity will not cause structural weakness. Plans sequence of installation to avoid obstructions and activities of other construction workers. Cuts pipe, using hacksaw, pipe cutters, hammer and chisel, cutting torch, and pipe cutting machine. Threads pipe, using threading machine. Bends pipe by hand or with pipe-bending machine. Assembles and installs variety of metal pipe and pipe-fittings. Secures pipes to structure with clamps, brackets, and hangers, using hand tools. Tests piping system for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. May weld holding fixtures to structural steel members. Requirements: • Workers should be able to: Work within precise limits or standards of accuracy, • Make decisions based on measurable criteria, • Visualize objects in three-dimensions from plans and drawings, • Work easily and skillfully with hands, • 75% Travel, • Valid Driver's License Non-Essential Functions: • Work requires some computer proficiency, moderate typing. Completing work orders or completing job related paper work by writing. Competing written expense reports as needed. Driving or operating fork trucks, man-lifts, or other transportation type equipment. Physical Skill and Effort: • Work easily and skillfully with hands, • Lift and carry objects weighing up to 50 pounds, • See well (either naturally or with correction), • Climb and maintain balance on high ladders and scaffolds, • Stand, stoop, kneel, or crouch Working Conditions and Hazards: • Knowledge of Industrial & commercial safety, General Basic plus Safety, LOTO, working overhead, confined space entry, basic electricity safety. Education: A High School diploma or equivalent is mandatory. Other Experience: • Computer competency including Outlook, Word, Excel, • Basic understanding of HVAC industry terminology a plus, • This position requires at least three years’ experience in a similar industrial/technical position. Travel: 75%+ Primarily field and project based Benefits of being a Cleaver-Brooks Sales & Service Employee: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance, • Paid time off and 11 paid holidays Who is Cleaver-Brooks Sales & Service: Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Job Description JOB DUTIES • Read and interpret blueprints, P&IDs, schematics, and technical drawings, • Install and repair various types of instrumentation such as temperature, pressure, level, and flow gauges, • Thread, bend, cut and install tubing and piping systems as per specifications, templates and drawings, • Be able to install instrument stands, instrument air headers, instruments, tube tray, and screw pipe, • Have knowledge of high-pressure valves and fittings, • Test and troubleshoot instrumentation to ensure proper functionality and safety measures, • Maintain a clean, safe, and organized work environment, • Adhere to safety regulations and procedures QUALIFICATIONS • High school diploma or equivalent, • Completed a recognized industrial mechanical course, technical diploma or equivalent education and work experience, • Basic computer literacy and the ability to learn new software programs, • The capability to work collaboratively in a team environment as well as individually, • A strong commitment to safety and quality assurance REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exits. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. INTERPERSONAL SKILLS Demonstrates ability to communicate and work effectively with others. Demonstrates the ability to work calmly and effectively under pressure. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to sit; handle, feel; reach with hands and arms; talk or hear. The employee is frequently required to stand and walk, climb ladders, squat, lift and/or move up to 30 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision and peripheral vision. WORK ENVIRONMENT The environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is exposed to hot and cold temperatures. The noise level in the work environment is usually high. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice \nCompany Description The IGS Group has sales and manufacturing operations in the US (GENERON IGS, and China (SMC-IGS) and Sales-only offices in Germany, and Norway. The IGS Group specializes in technologies that separate atmospheric gases from compressed air systems, and Process Gas separations (Biogas, H2, He, etc.). www.generon.com The IGS Group has sales and manufacturing operations in the US (GENERON IGS, and China (SMC-IGS) and Sales-only offices in Germany, and Norway. The IGS Group specializes in technologies that separate atmospheric gases from compressed air systems, and Process Gas separations (Biogas, H2, He, etc.). www.generon.com

Job Description Blender Operator • Pay: $19/HR, • Schedule: Mon–Fri/1st shift: 06:00 AM - 2:30 PM / 3rd Shift: 10:30 PM – 06:30 AM (Training on 1st shift), • Location: Houston, TX 77041, • PPE: Steel-toed boots required The Blender mixes and pre-forms materials for thread seal tape production. Core Responsibilities: • Mixing & Pre-forming: Weigh and measure PTFE resins, pigments, and lubricants; operate pre-forming equipment to create billets for extrusion., • Extrusion Operation: Set up and operate extrusion lines, ensuring continuous product flow using correct tooling and dies., • Quality Control: Use gauges, calipers, and micrometers to verify products meet exact specifications., • Inventory & Logistics: Move resin drums to storage, maintain accurate material records, and tag finished jumbo rolls., • Maintenance: Clean and inspect equipment regularly to ensure safe, optimal operating conditions. INCLUDING SWEEPING/CLEANING/DETAILING AREA. Qualifications: • Accredited High School Diploma or GED., • 1–3 years of manufacturing experience preferred., • Ability to lift/move up to 35 lbs frequently., • Physical capability to stand, stoop, and bend for extended periods., • Apply: www.pridestaff.com/houstonnw\nCompany Description Pridestaff is a leading boutique staffing and recruiting firm in Northwest Houston specializing in admin, accounting, and light industrial. PrideStaff has received the staffing industry's highest honor for client service: the Best of Staffing award from loyalty research firm, Inavero. Inavero is our industry's leading provider of independent client and job candidate surveys. Their Best of Staffing award is reserved for the top performing firms; fewer than 1% of all staffing firms in North America. Pridestaff is a leading boutique staffing and recruiting firm in Northwest Houston specializing in admin, accounting, and light industrial. \r\n\r\nPrideStaff has received the staffing industry's highest honor for client service: the Best of Staffing award from loyalty research firm, Inavero. Inavero is our industry's leading provider of independent client and job candidate surveys. Their Best of Staffing award is reserved for the top performing firms; fewer than 1% of all staffing firms in North America.

Job DescriptionDescriptionAt GME Supply, we equip tower climbers, lineworkers, and industrial athletes with premium safety equipment, rugged workwear, and specialized gear. As our Customization Specialist – Embroidery, you’ll be the craftsman turning high-performance technical apparel and gear into custom-branded workwear our clients wear with pride on job sites nationwide. In this role, you’ll take ownership of our commercial embroidery equipment—running precision multi-head machines, dialing in needle and tension settings for tough technical fabrics, and ensuring every run leaves the shop looking sharp, durable, and clean. If you love working with your hands, take pride in flawless quality, and want to grow with a fast-scaling team, we want to hear from you. Key Responsibilities • Machine Setup & Operation: Calibrate, program, and run commercial multi-head embroidery machines, adjusting speed and tension settings to match garment materials., • Material & File Selection: Review production art files and match the right specialty threads, needle gauges, and stabilizers/backings to meet precise client design standards., • Hooping & Production Runs: Hoop, align, load, and unload garments and technical gear efficiently, maintaining clean placement and preventing fabric puckering., • Real-Time Quality Control: Monitor active runs to quickly diagnose and resolve thread breaks, tension imbalances, or needle issues before garments are compromised., • Order Finishing & Presentation: Perform final trimming, steaming, folding, packaging, and staging so every finished order is job-site ready., • Process Documentation: Log stitch counts, color sequences, tension parameters, and specialty backings on new runs to guarantee exact consistency on client reorders., • Shop Maintenance & Team Growth: Keep equipment oiled, clean, and production-ready; participate in cross-training across other customization methods and support teammates as needed. Skills Knowledge and Expertise • Collaborative Communication: Strong verbal and interpersonal skills to coordinate job queues, clarify order specifications with the art department, and work seamlessly alongside production teammates., • Organized Workspace & Order Flow: Proven organizational skills to manage multiple client runs, keep production accessories sorted (threads, bobbins, backings), and maintain a safe, tidy workstation., • Time Management & Micro-Detail Focus: Exceptional ability to pace hooping and staging during active machine cycles, with an eagle-eye for catching micro-flaws like thread tension drifts, registration shifts, and skipped stitches., • Proactive Drive & Sense of Urgency: A self-starting mindset that thrives in a fast-paced environment, takes initiative on machine maintenance, and keeps orders moving out on time without needing constant supervision Work with us!We are a tight-knit group, and we understand the needs of our teammates. This personal connection allows us to strategically design competitive benefits packages that enhance the employee experience and support overall well-being. Some of our benefits: • Company HSA Contributions, • Add On Insurance Options: Accident, Short Term Disability, etc., • Free Employee Assistance Program:24/7 access, • Generaous paid time off (PTO) that increases with tenure, plus company-paid holidays, • Volunteer Paid Time Off: Give back to our community & get paid!, • 401k Matching Options with no Vesting Requirements Applications for this opening are being taken exclusively online, thank you for your interest in joining our growing team! This job description is not intended to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The GMES family of companies provides to individuals of all races, national origin, gender, sexual orientation, marital, and veteran status, equal employment opportunities within our dynamic growth plans. #ZR

Job Description We’re hiring a Machine Operator for our Northwest Houston, TX client! We are looking for mechanically inclined candidates with manual machine operation experience who are ready to interview immediately! DESCRIPTION OF YOUR DREAM JOB: Job Title: Machine Operator – Roll Threading Location: Northwest Houston, TX Pay: Starting at $18.00/hour Hours: Monday–Friday, 8:00 AM–5:00 PM Duration: Full-Time Description of Duties: Set up and operate manual thread rolling machines to produce quality fasteners and rods. Select proper tooling, perform die changes, and make tooling adjustments according to production instructions. Use precision measuring equipment to inspect parts and verify conformity to prints, drawings, and production travelers. Work with the supervisor and maintenance team to resolve machine, tooling, and setup issues. Complete production and inspection documentation while following applicable Quality System procedures and OSHA regulations. Requirements: • Mechanical background and experience operating manual machines required, • Basic knowledge of hand tools and units of measurement, • Ability to perform machine setup, die changes, and tooling adjustments, • Ability to use precision measuring tools and follow prints, drawings, and production instructions, • Strong attention to detail and accurate documentation skills, • Ability to routinely lift 50 pounds; some duties may require lifting 60 pounds, • Must pass a background check and drug screening, • One or more years of roll threading experience preferred but not required\nCompany Description Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com. Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com.

Job Description Key Responsibilities include: • Apply thread lubricant or storage compound to threads, as required., • Apply proper thread protectors to finished threads to prevent damage., • Operate cut-off saw to cut off pipe ends or rejected threads as directed., • Operate swaging equipment as directed., • Manually drifts pipe as required., • Perform shop cleanup as needed., • Perform abrasive blasting of threaded ends as required., • Assist machine operators with heavy tooling used when setting up machines., • Assist Shop Helper II in performing phosphate coating & buckon product preparation., • Quality minded individual with experience in FVI., • Follow all work instructions, specifications and requirements., • Follow all Company Rules, Procedures and Policies., • Follow all Company Safety Rules., • Any other duties as assigned by Foreman or Manager. Requirements • High School education or equivalent, preferred., • 1-2 years of experience as a Production Operator., • Ability to operate a forklift., • Ability to read, write and speak English., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well.

Job Description Your Day-to-Day Impact You’ll play a vital role in our Production team by: • Adhere to all safety policies, procedures, and wear required PPE and uniform., • Apply thread lubricant or storage compound to threads as needed., • Install thread protectors to prevent damage to finished threads., • Operate saws to cut off pipe ends or rejected threads., • Operate swaging equipment as directed., • Manually drift pipe as required., • Perform shop cleanup and abrasive blasting of threaded ends., • Assist machine operators with heavy tooling during machine setup., • Assist in phosphate coating and product preparation., • Ensure quality control and follow all work instructions, specifications, and company rules., • Perform any other duties as assigned by the Lead, Supervisor, or Manager What You Bring We’re looking for candidates who are sharp, safety-focused, and ready to roll up their sleeves: • High School Diploma or equivalent, preferred., • 0-2 years of experience as a Production Operator., • Ability to operate a forklift and overhead crane once trained., • Must be fluent in English, with the ability to read, write, and communicate effectively., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well. What You’ll Gain • Get paid for what you know - and earn more as you learn more., • Opportunities to work on cutting-edge equipment, • A culture that values your input and celebrates improvement, • Real growth potential in a stable, essential industry And Benefits that Include: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Discretionary Performance-Based Bonus Program, • Tuition Reimbursement Safety isn’t negotiable, it’s who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don’t cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it’s a promise we make to every colleague, every day.

Job DescriptionCNC Mill Machinist Pay: $22 - $28 Location: Houston, TX Temp-to-hire Openwork, formerly Meador Staffing, is seeking an experienced CNC Mill Machinist who can read a print, set up a VMC, prove out the first piece, and consistently produce quality parts with minimal supervision. Work includes gage bodies, cover plates, valve components, and flanged parts in carbon steel, stainless steel, and specialty alloys. Precision is critical because products are used in pressure-containing applications. Responsbilities • Set up and run 3-axis vertical machining centers, including 4th-axis work as needed, • Read blueprints, GD&T callouts, and routers to plan jobs before machining, • Select and load tooling, set work and tool offsets, and build fixtures or soft jaws, • Run first-article parts, make adjustments, and establish proven setups, • Change over jobs efficiently in a high-mix, low-volume shop, • Edit G-code at the control to adjust feeds, speeds, and toolpaths, • Write simple programs at the machine for one-off and repair parts, • Work with CAM programs and provide feedback when programs or prints require changes, • Inspect parts using micrometers, calipers, bore gages, height gages, thread gages, and indicators, • Hold tolerances to 0.001 in. when specified, • Complete first-article, in-process, and final inspection records, • Identify and tag nonconforming material and assist with root-cause analysis, • Follow ISO 9001 quality procedures and material traceability requirements, • Perform daily machine checks, coolant maintenance, chip removal, and basic preventive maintenance, • Report machine issues promptly to minimize downtime, • Maintain a clean, organized work area, • Follow all safety requirements, including PPE, lockout/tagout, and safe lifting practices, • Assist with manual machining, deburring, or assembly as production needs requireQualifications, • 2+ years of experience setting up and operating CNC vertical machining centers, • Hands-on experience with Haas, Fanuc, or similar controls, • Ability to read blueprints, including GD&T, • Proficiency editing G-code and M-code at the machine, • Skill with precision measuring tools, • Experience machining carbon steel and stainless steel, • Solid shop math skills, including trigonometry, • High school diploma or GED, • Reliable attendance and willingness to work regular overtime, • Experience with Mastercam, Fusion 360, or another CAM package, • 4th-axis or multi-part fixture experience, • Experience machining Monel, Hastelloy, Inconel, duplex stainless, or other specialty alloys, • Background with valves, pressure-containing parts, or oil and gas components, • Familiarity with ASME, API, or NACE material requirements, • Experience in an ISO 9001 shop, • Manual mill and lathe experience, • Technical school certificate or NIMS credentials in CNC machining Schedule Monday through Friday | 6:30 a.m. to 3:30 p.m. 30-minute lunch One 15-minute break in the morning One 15-minute break in the afternoon Regular overtime should be expected as order volume grows. Overtime is paid at time and a half for hours worked over 40 in a week. Occasional early starts or Saturday work may be required to meet ship dates. Work environment and physical requirements This is an active shop-floor position involving running machinery, coolant, and metal chips. The shop is not fully climate controlled, and Houston summers can be hot. • Stand and walk for most of an 8.5-hour shift, • Lift up to 50 lb. without assistance and heavier parts with a hoist or coworker, • Bend, reach, and grip tools and parts repeatedly, • Read fine print, scales, and gage readings, with correction if needed, • Wear safety glasses, steel-toe boots, and hearing protection in posted areas, • Operate an overhead crane or forklift after training, if certifiedWhy Openwork? Openwork has 50+ years of experience connecting talented people with great employers. We offer a people-first approach and opportunities to grow your career. Apply today atwww.openwork.comand take the next step in your career with Openwork! EOE Openwork is an Equal Opportunity Employer. Apply online on www.openwork.com and call our Clear Lake office at 281-486-1700 to get scheduled for an interview. \nCompany Description Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start. Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start.

Job Description We are seeking a Landis Machine Operator for a manufacturing companu specializing in fasteners, nuts, bolts, and other threaded metal components. This is a great opportunity for someone with experience operating thread-cutting machinery in a production environment. Responsibilities: • Operate Landis thread-cutting machines to produce threaded components, including fasteners, nuts, bolts, and related products., • Set up machines and adjust or change tooling as needed., • Monitor production to ensure parts meet quality and dimensional specifications., • Inspect finished components using thread gauges and precision measuring tools., • Identify threading issues and make adjustments to maintain product quality., • Maintain a clean and safe work area. Qualifications: • Previous Landis machine or thread-cutting experience preferred., • Experience with machine setups and tooling changes is a plus., • Ability to inspect threaded parts using gauges and measuring instruments., • General machining or fastener manufacturing experience is beneficial., • Strong attention to detail and commitment to quality., • Must have a valid driver's license Pay: $22–$28 per hour, based on experience. You should be proficient in: • Machine Setup, • Threading, • Machining Machines & technologies you'll use: • Thread Rolling Machine, • Threading, • Landis

Job DescriptionAbout World Emblem International World Emblem is a global leader in high-quality apparel decorations. Our diverse product line includes FlexStyle, custom embroidery, sublimated patches, high-visibility striping, and transfers. We pride ourselves on industry-leading turnaround times—averaging less than five days—and a commitment to innovation. At World Emblem, we foster an inspiring work environment where team members have the resources to grow and succeed. Job Summary We are looking for detail-oriented Machine Operators / Sewers to join our growing production team. In this role, you will be responsible for operating industrial embroidery and sewing machinery to create high-quality apparel products. Experience in embroidery or manufacturing is a plus, but not required—we provide comprehensive, hands-on training for the right candidates. Key Responsibilities Machine Operation: Set up and operate multi-head embroidery or sewing machines efficiently. Quality Control: Monitor production runs to ensure consistent quality, adhering strictly to company output standards. Maintenance: Perform basic machine upkeep, such as threading needles, clearing jams, and adjusting tensions. Defect Detection: Identify and correct garment, thread, or stitching defects during the production process. Production Tracking: Maintain accurate logs of daily output and report any equipment malfunctions promptly. Required Skills & Abilities Visual Precision: Ability to accurately identify colors and detect subtle differences in patterns, letters, and numbers. Manual Dexterity: Strong hand-eye coordination to quickly thread needles, handle fabrics, and manipulate small parts. Technical Control: Ability to make repeated, precise adjustments to machine controls and software settings. Pace & Endurance: Comfort standing for extended periods and working in a high-volume, fast-paced manufacturing environment. Job Requirements Experience: 1–2 years of experience in manufacturing, production, sewing, or a similar fast-paced environment (preferred, but entry-level candidates with high aptitude are encouraged to apply). Commitment: High standards for quality and a strong, dependable work ethic. Teamwork: Excellent communication skills and a collaborative, positive mindset. Reliability: Proven track record of punctuality and dependable attendance. Traits for Success Exceptional attention to detail. Highly organized with strong time-management skills. Ability to remain focused, calm, and productive under pressure. Capable of multitasking and handling changing priorities smoothly. Additional Information Equal Opportunity Employer (EOE): World Emblem celebrates diversity and is committed to creating an inclusive environment for all employees regardless of age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. Compliance: World Emblem is a drug-free workplace. All candidates must successfully pass a criminal background check, pre-placement drug screen, and E-Verify verification.

Job Description Key Responsibilities include: • Apply thread lubricant or storage compound to threads, as required., • Apply proper thread protectors to finished threads to prevent damage., • Operate cut-off saw to cut off pipe ends or rejected threads as directed., • Operate swaging equipment as directed., • Manually drifts pipe as required., • Perform shop cleanup as needed., • Perform abrasive blasting of threaded ends as required., • Assist machine operators with heavy tooling used when setting up machines., • Assist Shop Helper II in performing phosphate coating & buckon product preparation., • Quality minded individual with experience in FVI., • Follow all work instructions, specifications and requirements., • Follow all Company Rules, Procedures and Policies., • Follow all Company Safety Rules., • Any other duties as assigned by Foreman or Manager. Requirements • High School education or equivalent, preferred., • 1-2 years of experience as a Production Operator., • Ability to operate a forklift., • Ability to read, write and speak English., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well.

Job Description Your Day-to-Day Impact You’ll play a vital role in our Production team by: • Adhere to all safety policies, procedures, and wear required PPE and uniform., • Apply thread lubricant or storage compound to threads as needed., • Install thread protectors to prevent damage to finished threads., • Operate saws to cut off pipe ends or rejected threads., • Operate swaging equipment as directed., • Manually drift pipe as required., • Perform shop cleanup and abrasive blasting of threaded ends., • Assist machine operators with heavy tooling during machine setup., • Assist in phosphate coating and product preparation., • Ensure quality control and follow all work instructions, specifications, and company rules., • Perform any other duties as assigned by the Lead, Supervisor, or Manager What You Bring We’re looking for candidates who are sharp, safety-focused, and ready to roll up their sleeves: • High School Diploma or equivalent, preferred., • 0-2 years of experience as a Production Operator., • Ability to operate a forklift and overhead crane once trained., • Must be fluent in English, with the ability to read, write, and communicate effectively., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well. What You’ll Gain • Get paid for what you know - and earn more as you learn more., • Opportunities to work on cutting-edge equipment, • A culture that values your input and celebrates improvement, • Real growth potential in a stable, essential industry And Benefits that Include: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Discretionary Performance-Based Bonus Program, • Tuition Reimbursement Safety isn’t negotiable, it’s who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don’t cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it’s a promise we make to every colleague, every day.

Job Description JOB DESCRIPTION: The CNC mill Machinist is responsible for the machining of new and repair part products to print specifications. RESPONSBILITES: • Perform operational functions of CNC machines, maintain proper maintenance of machine equipment, • Reading of blueprints, sketches, machine parts or specifications to determine type and dimensions of stock required., • Observe machine operation to detect malfunction or out-of-tolerance machining, and adjust machine controls as required., • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Maintain a safe work environment and keep work area clean and organized., • Conduct all business activities in accordance with company code of conduct, policies and procedures and all applicable legal requirements., • Maintain traceability on all parts., • All other duties as assigned by your manager This job description is a summary of the primary job scope and should not be assumed as an all-inclusive description QUALIFICATIONS: • High School Diploma or equivalent., • Turbine machining is preferred., • 5 years' experience in CNC machining, • Ability to apply basic written and verbal communication skills., • Ability to read and comprehend complex instructions, work orders and drawings., • Ability to apply concepts of basic math and basic PC skills., • Ability to work in a team environment and effectively communicate., • Ability to follow directions and procedures. WORK CONDITIONS:

Job DescriptionPOSITION SUMMARY The Threader is responsible for safely setting up and operating threading equipment to produce threaded steel products according to sales orders, routers, drawings, and established quality requirements. The position performs machine setup, material verification, threading operations, dimensional inspections, material handling, production documentation, and routine equipment care while maintaining safety, quality, and production standards. ESSENTIAL DUTIES & RESPONSIBILITIES • Inspect threading machines, guards, emergency stops, tooling, and equipment before use., • Review sales orders, routers, drawings, and work instructions to determine job requirements., • Verify material heat number, diameter, type, and grade before processing., • Set up, adjust, and safely operate threading machines according to established procedures., • Properly position and secure material before beginning threading operations., • Perform first-piece and required in-process inspections to verify thread dimensions and tolerances., • Use calibrated measuring equipment, including calipers, micrometers, pitch micrometers, tape measures, and applicable gauges., • Identify defective or nonconforming threads and report quality or machine issues to the Supervisor or Quality Control., • Accurately complete Routers, inspection records, SPC documentation, and other required production records., • Maintain proper material identification and traceability throughout the threading process., • Safely stage and move steel materials using approved material-handling methods and equipment., • Operate overhead cranes and rigging equipment only when properly trained, certified, and authorized., • Maintain threading machines, tools, and work areas in a clean and orderly condition., • Perform basic equipment care and cleaning within the employee's level of training and authorization., • Immediately report equipment deficiencies, unsafe conditions, incidents, injuries, and near misses.SAFETY RESPONSIBILITIES, • Follow all company safety policies, procedures, Job Hazard Analyses, and safe work practices., • Wear all required Personal Protective Equipment (PPE)., • Follow machine guarding and Lockout/Tagout requirements., • Never touch or adjust material or machine components while they are rotating or in motion., • Keep loose clothing, jewelry, gloves, and other items away from rotating equipment and material where entanglement hazards exist., • Use emergency stops when necessary and wait until equipment has completely stopped before making adjustments., • Operate only equipment for which the employee has been properly trained and authorized.QUALIFICATIONS & TRAINING, • Complete required new-hire, HSE, and Threader-specific training., • Demonstrate the ability to safely set up and operate threading equipment., • Ability to read and understand work orders, Routers, drawings, and production instructions., • Ability to use applicable measuring and inspection equipment., • Basic understanding of thread dimensions, specifications, and tolerances., • Ability to identify defective or nonconforming products., • Complete supervised hands-on training and demonstrate competency before independent machine operation., • Maintain required crane or equipment certifications when applicable.PERFORMANCE EXPECTATIONS The Threader is expected to consistently demonstrate safe work practices, produce material within required specifications, complete accurate inspections and documentation, maintain acceptable productivity, properly care for equipment, maintain good housekeeping, and comply with company policies and procedures. PHYSICAL & WORK ENVIRONMENT Work is performed in an industrial steel manufacturing environment around powered machinery, rotating equipment, steel materials, cranes, tools, and material-handling equipment. The position may require prolonged standing, bending, reaching, handling materials and tools, and working in areas with industrial noise and moving equipment. Night Shift

Job DescriptionDescription: The Quality Control Inspector Level 2 is responsible for the inspection and testing of all products for defects and deviations according to specifications, including parts manufactured internally, those assembled internally, and those received from outside vendors. The Quality Control Inspector Level 2 is accountable for the following functions and responsibilities: • Independent use of:, • Calipers., • Depth gages., • Ring and plug gages., • Optical comparator., • Height gauge., • Visual software system., • Identify features on a print., • Visual inspections to identify damage, material issues and labeling mistakes., • Operate the parts shaker., • Move material to and from designated areas., • Fill out and tag non-conforming parts., • Perform visual inspection on received and sub-assembled product., • Meet daily production goals., • Maintain minimal returned products from other departments, • Inspect first articles with assistance., • Inspecting thread features without inspection aids., • Set up thread inspection gages., • Create and inspect molds., • Perform inspection on complex parts., • Responsible for in process inspection to ensure quality production runs., • Visual and thread inspection on final assemblies., • Pressure test on final assemblies, with assistance., • Inspect packaged product that is ready for shipment or transfer., • Understanding of calibration systems., • Perform basic calibration checks on equipment., • Use the inventory system to move parts when needed. Requirements: QUALIFICATIONS/EXPERIENCE REQUIRED: The Quality Control Inspector Level 2 must at a minimum possess the following: • High school diploma or GED equivalent is required., • Previous experience (3+ years) as an Inspector in a manufacturing setting is required., • Ability to read, write, and speak the English language fluently is preferred., • Ability to perform basic computer skills, including Microsoft Word and Excel., • Ability to successfully manage multiple tasks and timelines in a fast-paced environment., • Ability to liaise professionally with team members and system users., • Ability to perform assigned tasks with moderate supervision., • Strong verbal and written communication skills. PHYSICAL REQUIREMENTS: The Quality Control Inspector Level 2 must be able to: • Operate basic office machines, such as a computer, copy machine, fax, scanner, etc., • Lift a minimum of 50lbs., repeatedly, without assistance and up to 100lbs with assistance., • Push/pull heavy objects with the proper equipment., • Wear the appropriate PPE when required (i.e., safety glasses or side shields, steel-toe footwear, etc.)., • Stand for long periods of time; up to 8-12 hours a day.

Job DescriptionBenefits: • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • Wellness resources About Us Founded in 1990, FERPA Precision Machine, Inc. is a family-owned business with over 36 years of experience in outsourced manufacturing. We specialize in high-performance seals and components, offering innovative, reliable, and on-time solutions as a single-source machining provider. Our collaborative work environment values each team member’s contribution as we continue our tradition of manufacturing excellence. We look forward to partnering with you! Position Summary FERPA Precision Machine is seeking an experienced CNC Lathe Machinist to support our growing aerospace and space manufacturing business. This position is responsible for setting up, operating, and optimizing multi-axis CNC turning centers equipped with Y-axis, live tooling, C-axis, and sub-spindles, including our new DN Solutions PUMA 2600SY II. The ideal candidate is a highly skilled setup machinist who can independently take apart from print to production by developing efficient machining strategies, optimizing cycle times, troubleshooting machining issues, and producing precision components with tight tolerances and complex profile requirements. Responsibilities • Set up and operate multi-axis CNC turning centers equipped with Y-axis, live tooling, C-axis, and sub-spindles, including the DN Solutions PUMA 2600SY II., • Perform first-piece setups, prove out new programs, and optimize machining processes for efficiency, quality, and tool life., • Configure tooling, tool offsets, work offsets, and cutter compensation as required by job specifications., • Read and interpret engineering drawings, CAD models, GD&T, and customer specifications., • Perform detailed inspections using micrometers, calipers, bore gauges, indicators, thread gauges, and other precision measuring equipment to verify part conformity., • Verify machine setup and ensure compliance with quality standards and customer requirements., • Design and build custom fixtures and workholding solutions to support efficient production., • Select appropriate cutting tools, inserts, holders, feeds, speeds, and machining strategies for a variety of materials., • Troubleshoot machining, tooling, and process issues to maintain productivity and improve cycle times., • Perform routine machine maintenance and maintain equipment in safe working condition., • Work closely with Engineering, Quality, and Production to meet delivery schedules and quality objectives., • Maintain a clean, organized, and safe work environment., • Perform other duties as assigned to support business and production needs. Job Requirements/ Qualifications High school diploma or equivalent; technical or vocational machining education preferred. • 5+ years of experience setting up and operating CNC lathes., • Experience with multi-axis turning centers featuring live tooling, Y-axis, C-axis, and sub-spindles., • Experience machining precision metal components from:, • 300 Series Stainless Steel, • Nitronic 50 / Nitronic 60, • 15-5 PH & 17-4 PH Stainless Steel, • Aluminum, • Bronze, • MP35N, • Inconel, • Experience in aerospace, space, or other precision manufacturing environments preferred. Skills and Competencies • Blueprint reading and tolerance interpretation., • Knowledge of tooling, materials, and cutting parameters., • Proficiency with precision measuring instruments., • Strong shop math and troubleshooting skills., • Detail-oriented, organized, and able to work independently., • AS9100 and ISO 9001 experience or familiarity is a plus. Additional Requirements • This position requires U.S. Person status as defined by applicable law for authorized access to data controlled under the International Traffic in Arms Regulations (ITAR). A U.S. Person includes U.S. Citizens, U.S. Nationals, lawful permanent residents, and workers granted refugee or asylum status in the United States.

Job Description Lead Lathe Machinist Job Title Lead Lathe Machinist Department CNC Production Reports To CNC Department Manager Location 7865 Northcourt Rd, Suite #100, Houston, Texas 77040 Effective/Revision Date 11/2026 Role Purpose The Lead Lathe Machinist provides advanced technical leadership in precision CNC turning operations, independently performing complex setups, program prove-outs, troubleshooting, and precision machining of metal components, including parts produced to applicable aerospace and other high-precision customer requirements. The position supports dimensional accuracy, product quality, safe operations, and the development of other machinists. Scope & Responsibilities Key Responsibilities: • Set up, operate, and troubleshoot CNC turning centers, including multi-tasking lathes with live tooling and C-axis capabilities., • Execute sub-spindle operations, including part transfers, synchronization, and complete machining in a single setup., • Set up, program, adjust, and troubleshoot CNC bar feeders and prove out new CNC programs., • Select and apply turning, boring, grooving, threading, and live tooling strategies, with appropriate speeds, feeds, and chip control., • Interpret engineering drawings and GD&T requirements, machine tight-tolerance parts, and verify dimensions using precision inspection equipment., • Diagnose machining problems, implement corrective actions, and support machine maintenance, tooling management, and process performance., • Apply 5S and Lean Manufacturing principles and follow documented procedures and safe work practices., • Provide day-to-day technical guidance to machinists, coach less-experienced team members, and support work priorities and consistent machining practices., • Conduct or verify first-piece and in-process inspections, document results as required, and confirm that machined components meet drawings, GD&T, and applicable customer specifications., • Maintain material and part identification, traceability, and required machining and inspection records in accordance with applicable work instructions and customer requirements., • Immediately identify, contain, segregate, and report suspected nonconforming parts; support investigation, corrective actions, and prevention of repeat issues., • Follow applicable quality-management-system procedures, including customer-specific and aerospace-related requirements when assigned; communicate quality, tooling, equipment, and schedule concerns promptly. Work Experience & Skills Education: Formal education requirement not specified; relevant CNC machining training and demonstrated experience are considered. Experience: Advanced hands-on CNC machining experience as detailed below; no specific minimum number of years established. Required Qualifications & Experience: • Advanced experience operating, setting up, and troubleshooting CNC turning centers., • Extensive experience with multitasking CNC lathes equipped with live tooling and C-axis capabilities., • Strong experience with sub-spindle operations, including part transfers, synchronization, and complete machining of components in a single setup., • Experience with CNC bar feeders, including setup, programming, adjustment, and troubleshooting., • Ability to independently set up complex jobs and prove out new CNC programs., • Advanced understanding of turning tools, inserts, boring bars, grooving tools, threading tools, and live tooling applications., • Strong understanding of cutting speeds, feeds, chip control, tooling geometry, and machining strategies., • Advanced blueprint reading and GD&T interpretation skills., • Experience machining tight-tolerance components and maintaining consistent dimensional accuracy., • Strong understanding of material properties, including aluminum, stainless steel, alloy steels, and specialty materials., • Ability to identify machining problems and implement effective corrective actions., • Proficiency with precision inspection equipment, including micrometers, calipers, bore gages, indicators, thread gages, and other measurement tools., • Knowledge of CNC machine maintenance, tooling management, and machine performance., • Experience working within ISO 9001 or AS9100 quality management systems preferred., • Experience implementing 5S and Lean Manufacturing principles., • Mastercam Lathe and Mill Turn Quality / Compliance Knowledge: Ability to follow applicable documented procedures for first-piece and in-process inspection, inspection records, material/part traceability, and nonconforming product control. Experience with ISO 9001 or AS9100 environments is preferred; certification is not assumed. Personal Attributes: Technical leadership, attention to detail, accountability, independent problem-solving, effective communication, sound judgment, and a strong commitment to quality and safety. Working Conditions & Physical Requirements Work environment: Active metal-machining and manufacturing environment with CNC machinery, moving equipment, tooling, coolant, chips, noise, and precision inspection activities. Follow site safety rules, machine guarding, lockout/tagout requirements when applicable, and required PPE. Physical or operational requirements: Regular standing and walking; safely performing setups, tooling changes, machine operation, and precision inspections; manual dexterity and visual acuity for dimensional measurements. Specific lifting requirements and frequency of physical tasks are determined by the position and worksite. Compliance Statements Equal Opportunity Employer: Disability/Veteran

Job Description We are? We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we’ve been energizing our clients across the world with unrivalled expertise, equipment, and technology that supports the entire asset life-cycle – offshore and on land. We enable progress through our three global business lines: Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions. Within these areas, we offer a wide range of services, including cranes, lifting, fluid power, training, equipment rental, pipeline and subsea, process, and valves – all designed to help our clients optimize performance, enhance reliability, and improve efficiency. With a focus on operational excellence, we deliver value through our customized integrated solutions. This approach reduces risk and enhances efficiencies making us a leading and trusted partner every step of the way. The Role and Responsibilities EnerMech have a new opportunity for a Hydraulic Technician, Tube Instrument Fitter to join the Fluid Power Products team in Houston. This role is responsible for the fabrication, installation, inspection, testing, and maintenance of stainless steel hydraulic and instrumentation tubing systems ranging from 1/4" to 2" in diameter. This position requires the ability to interpret engineering drawings and P&IDs, fabricate precise tubing runs, perform coning and threading for medium- and high-pressure tubing, install tubing supports, and ensure all hydraulic systems meet customer specifications and industry safety standards. The Requirements Essential Duties and Responsibilities • Install, bend, route, and secure stainless steel tubing from 1/4" through 2" OD., • Fabricate tubing assemblies using manual and hydraulic tube benders., • Measure, cut, deburr, clean, and prepare tubing for installation., • Cone and thread medium-pressure (MP) and high-pressure (HP) stainless steel tubing using manufacturer-approved tooling and procedures., • Install MP and HP tubing connections, glands, collars, and pressure fittings in accordance with manufacturer specifications., • Install compression fittings, pipe fittings, valves, manifolds, clamps, supports, and hydraulic components., • Read and interpret hydraulic schematics, P&IDs, isometric drawings, and fabrication drawings., • Ensure proper tube routing, spacing, support, bend radii, and fitting alignment to prevent vibration, fatigue, and leaks., • Perform pressure testing, flushing, and leak testing of hydraulic systems., • Troubleshoot hydraulic systems and repair tubing, fittings, valves, and component failures., • Install and torque hydraulic fittings in accordance with manufacturer specifications., • Maintain hydraulic system cleanliness to minimize contamination and ensure system reliability., • Perform preventative maintenance and repairs on hydraulic equipment., • Operate tubing fabrication equipment including tube benders, coning and threading machines, flaring tools, saws, threaders, and pressure testing equipment., • Document completed work, inspection results, and pressure test records., • Maintain a safe and organized work environment while complying with company safety policies., • Travel to customer facilities and offshore/onshore job sites as required. Required Qualifications • High school diploma or GED., • Minimum of 3 years of hydraulic tubing installation or related industrial experience., • Experience installing 316 stainless steel tubing from 1/4" through 2"., • Experience coning and threading MP and HP stainless steel tubing., • Knowledge of medium- and high-pressure tubing systems and pressure-rated fittings., • Proficient in the use of hand tools, power tools, tube benders, and coning/threading equipment., • Ability to read and interpret hydraulic schematics and engineering drawings., • Knowledge of compression fitting systems such as Parker A-LOK, Swagelok, Hy-Lok, Autoclave Engineers, HIP, or equivalent., • Strong mechanical aptitude and troubleshooting skills., • Ability to work independently and as part of a team., • Valid driver's license and ability to travel as required. Preferred Qualifications • Experience in oil & gas, petrochemical, pipeline, offshore, or industrial environments., • Experience with hydraulic flushing, cleanliness verification, and hydrostatic pressure testing., • Experience assembling and testing hydraulic control panels, manifolds, and power units., • Forklift, aerial lift, or overhead crane certification., • TWIC Card., • OSHA 10 or OSHA 30 certification. Physical Requirements • Ability to lift up to 50 pounds., • Ability to stand, kneel, bend, climb ladders, and work in confined spaces., • Ability to work outdoors in varying weather conditions., • Ability to wear required personal protective equipment (PPE). Knowledge, Skills, and Abilities • Excellent attention to detail and workmanship., • Strong understanding of hydraulic systems, fluid power principles, and pressure-containing tubing systems., • Ability to fabricate neat, accurate, leak-free tubing installations., • Strong communication and problem-solving skills., • Ability to prioritize multiple tasks while meeting project deadlines., • Commitment to quality, safety, and customer satisfaction. Diversity & Inclusion EnerMech is dedicated to fostering a diverse and inclusive organisation. We believe that diversity enriches our team, and we welcome applications from candidates of all backgrounds, cultures, and identities.

Job Description We are seeking experienced Pipe Fitters to install, assemble, and maintain piping systems for commercial and industrial applications. The ideal candidates will have experience working with various piping materials and ensuring high-quality installations that comply with industry standards and regulations. Key Responsibilities: • Install, inspect, and repair piping systems, including water, gas, and industrial piping., • Cut, thread, weld, and assemble pipes using various tools and techniques., • Read and interpret blueprints, schematics, and specifications to determine the layout and installation of piping systems., • Ensure compliance with safety regulations, industry codes, and project requirements., • Test piping systems for leaks using pressure gauges and other testing equipment., • Work closely with other trades, including welders, plumbers, and general contractors., • Maintain an organized and safe work environment, adhering to OSHA standards., • Train and mentor apprentices and junior pipe fitters. Qualifications:, • High school diploma or equivalent., • Minimum of 4-5 years of experience in pipe fitting for commercial or industrial projects., • Ability to read and interpret blueprints, technical drawings, and piping schematics., • Experience working with a variety of pipe materials, including steel, copper, and PVC., • Proficiency in using pipe fitting tools, including cutting, threading, and welding equipment., • Strong problem-solving and troubleshooting skills., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license with a clean driving record., • Ability to pass background check and drug screening. Preferred Skills:, • Certification in pipe fitting or welding., • Experience with industrial piping systems and HVAC piping., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description Night Shift Pipefitter Houston, TX $27–$33/hour + 10% differential Full-Time | Overtime Available Schedule: Monday–Saturday | 6:00 AM – 5:30 PM About the Opportunity We are hiring experienced Pipefitters / Industrial Pipe Technicians to join a high-performance manufacturing team in Houston. This role is ideal for skilled professionals with strong blueprint reading and fabrication experience who are comfortable working night shifts and long hours. You’ll play a key role in building and assembling piping systems used in industrial applications, with consistent overtime and competitive pay. Key Responsibilities • Select proper pipe types, sizes, and materials based on specifications, • Cut, thread, and bend pipe using hand tools, cutting equipment, and pipe machines, • Assemble and install metal and non-metal piping systems (including steel and stainless steel), • Interpret blueprints, P&IDs, and technical drawings to execute builds accurately, • Perform MIG welding setups and assist with fabrication as needed, • Manage and track material inventory; coordinate with warehouse for replenishment, • Support inventory audits and maintain accurate material records, • Maintain a clean, organized workspace following 5S standards, • Follow OSHA safety standards and company safety procedures at all times, • Participate in safety training and proactively identify/report hazards Required Qualifications • 5+ years of pipefitting experience in a manufacturing or industrial environment, • Ability to read and interpret blueprints and pipe & instrumentation drawings (P&IDs), • Strong knowledge of pipe schedules, materials, and fittings, • Experience using pipe cutting, threading, and bending equipment, • Basic MIG welding setup experience, • Proficiency with hand tools, power tools, and measuring devices, • Solid math skills for measurements and layout, • Strong attention to detail and quality workmanship, • Good communication skills (English, written and verbal) Preferred Qualifications • Technical training or certification in pipefitting, • Experience with automated pipe fabrication equipment, • Forklift or crane certification, • Familiarity with lean manufacturing principles, • Advanced fabrication and installation experience Work Environment & Physical Requirements • Manufacturing/shop environment (non-climate controlled), • Standing for extended periods (10+ hours per shift), • Frequent lifting up to 50 lbs, • Regular bending, reaching, twisting, kneeling, and climbing as needed, • Required PPE: safety glasses, steel-toe boots (hearing protection recommended) Compensation & Schedule • $25–$33/hour, based on experience, • 11–12 hour shifts, Monday–Saturday, • Consistent overtime available

Job Description Pipe Fitter Location: Houston, TX Pay: $27.00–$33.00 per hour, DOE Night Shift Differential: Additional 10% pay differential for qualifying night-shift hours Position Overview We are seeking an experienced Pipe Fitter to join our manufacturing and fabrication team. The Pipe Fitter is responsible for the precise layout, fabrication, assembly, installation, and maintenance of pipe systems and supports. This position requires experience working with a variety of metal and non-metal piping materials, including steel and stainless steel. The successful candidate will be able to read blueprints and piping and instrumentation drawings, accurately measure and fabricate pipe, and safely operate pipe-fitting tools and equipment. The Pipe Fitter must demonstrate strong mechanical aptitude, attention to detail, and a commitment to safety and quality while working effectively with team members to meet production schedules. Key Responsibilities Select the appropriate type and size of pipe, fittings, supports, hangers, hydraulic cylinders, and related materials according to drawings and specifications. • Read and interpret blueprints, P&IDs, schematics, and technical documents., • Measure and lay out pipe accurately according to required dimensions and specifications., • Cut pipe using saws, pipe cutters, hammers and chisels, cutting torches, and pipe-cutting machines., • Thread pipe using pipe-threading equipment., • Bend pipe using pipe-bending rolls and pipe-bending machines., • Assemble and install metal and non-metal pipes, tubes, fittings, and related components., • Work with steel, stainless steel, and other applicable piping materials., • Set up and use MIG welding equipment for pipe-fitting and fabrication applications as required., • Install and position pipe supports, hangers, and related components., • Verify dimensions, alignment, fit-up, and assembly to ensure quality and accuracy., • Manage material inventory and ensure adequate materials are available to meet production requirements., • Coordinate with the warehouse team to ensure timely replenishment of materials., • Participate in material inventory audits and assist with accurate material tracking., • Maintain tools, equipment, and work areas in a clean and organized condition., • Follow 5S principles and company housekeeping standards., • Follow OSHA requirements and all company safety policies and procedures., • Conduct required safety checks and immediately report unsafe conditions or concerns to supervision., • Properly use all required PPE and safe work practices., • Participate in required safety training., • Perform other duties as assigned by management. Required Skills & Qualifications • Ability to read and interpret blueprints and piping and instrumentation drawings (P&IDs)., • Ability to accurately read and use measuring devices., • Knowledge of pipe schedules, dimensions, specifications, and base materials., • Ability to set up and operate a MIG welding machine., • Strong mechanical aptitude and troubleshooting skills., • Proficiency with hand and power tools used in pipe fitting., • Ability to perform basic mathematical calculations for measuring and determining dimensions., • Strong attention to detail and commitment to quality., • Good communication skills and ability to work effectively with team members and supervisors., • Strong safety awareness and understanding of safe work practices in a manufacturing environment., • Good command of the English language, both written and verbal. Education & Experience • High School Diploma or equivalent required., • Minimum 5 years of related pipe-fitting experience in a manufacturing environment. Preferred Qualifications • Technical training or certification in pipe fitting., • Experience with advanced pipe-fitting techniques and specialized tools., • Experience with automated pipe-cutting and threading equipment., • Forklift certification., • Overhead crane certification., • Additional welding or fabrication certifications., • Knowledge of manufacturing safety standards and best practices., • Familiarity with lean manufacturing and 5S principles. Physical Requirements & Work Environment This position is performed primarily in a manufacturing/shop environment and may involve exposure to industrial equipment, materials, noise, and varying temperatures. The Pipe Fitter must be able to: • Stand for extended periods, up to 10 hours per day with a lunch break, and up to 6 days per week as required., • Regularly sit or stand, bend, reach, and move throughout the work area., • Frequently move materials weighing up to 50 pounds., • Work in a non-air-conditioned environment., • Work around industrial tools, machinery, piping, and fabrication equipment., • Demonstrate normal vision and the ability to distinguish colors., • Maintain adequate hand-eye coordination for measuring, cutting, fitting, and assembly work., • Safely perform repetitive bending, reaching, lifting, and other physical movements associated with pipe fabrication., • Safety & PPE, • Safety is a critical responsibility of this position. Employees must follow all company safety policies, OSHA requirements, and applicable safe-work practices. Required PPE includes: • Safety glasses, • Steel-toe boots, • Additional PPE as required for specific tasks and work areas, • Hearing protection/earplugs are recommended and may be required in designated areas.

Job Description We are seeking a HVAC Journeyman Pipefitter proficiency in fabricating and installing various HVAC piping systems is a fundamental requirement for this position. The HVAC Pipefitter is tasked with completing projects in a timely manner. This position will maintain high quality performance on the job, excellent working relationships with customers, a high level of coordination and communication with team members. Responsibilities include but are not limited to include ensuring that all work is carried out in strict compliance with applicable codes, specifications, and Controlled Air · Proficient in pipe-fitting techniques such as soldering, brazing, and welding. · Knowledge of plumbing codes and standards. · Ability to read and interpret blueprints and technical drawings. · Experience with tube bending and caliper usage for precise measurements. · Familiarity with fire sprinkler fitting installation. Duties · Install, assemble, and maintain pipes and pipe systems according to specifications and codes standards. · Cut, thread, and bend pipes using hand tools or machines. · Weld, solder, or braze pipes and fittings together using various techniques such as FCAW (Flux-Cored Arc Welding). · Measure and mark pipes for cutting and threading. · Inspect and test installed pipe systems for leaks or defects. · Read and interpret blueprints to determine the layout of pipe systems. Job Type: Full-time Pay: $25.00 - $30.00 per hour Expected hours: 40 per week Schedule: • 8 hour shift, • Monday to Friday, • Weekend work ocassionally Education: • High school or equivalent (Preferred) Experience: • hvac pipefitter: 3 years (Required), • Blueprint reading: 3 years (Required) Ability to Commute: • Houston, TX 77066 (Preferred) \nCompany Description We are a full-service commercial HVAC contractor and plumbing company with building automation and construction aspects servicing commercial clients in Houston, Texas, and surrounding areas. Our team specializes in commercial HVAC installation, air conditioning and heating installation, preventative maintenance, commercial HVAC repair, and indoor air quality. The K&R Mechanical Services team has the necessary know-how to tackle any size project on budget and on schedule, ensuring efficient HVAC system repair when needed. We are a full-service commercial HVAC contractor and plumbing company with building automation and construction aspects servicing commercial clients in Houston, Texas, and surrounding areas. Our team specializes in commercial HVAC installation, air conditioning and heating installation, preventative maintenance, commercial HVAC repair, and indoor air quality. The K&R Mechanical Services team has the necessary know-how to tackle any size project on budget and on schedule, ensuring efficient HVAC system repair when needed.

Job Description Job Type: Full Time Job Location: Houston The purpose of this job description is to explain the responsibilities and requirements associated with the position. While the following information is comprehensive, it should be noted that some responsibilities and duties may not be specifically addressed. The Spitzer Companies emphasize a team approach and fully expects every person to perform any reasonable task or request that is consistent with fulfilling company objectives. 1.0 SUMMARY OF DUTIES Applies basic skills, knowledge and appropriate processes to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, and industrial production and processing systems by following blueprints and specifications. 2.0 REPORTS TO / SUPERVISES Reports To: Assigned Foreman Supervises: N/A 3.0 RESPONSIBILITIES This position will have the following general/minimum responsibilities: • Cut, thread and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders., • Assemble and secure pipes, tubes, fittings and related equipment, according to specifications, by welding, brazing, cementing, soldering and threading joints., • Attach pipes to structures and fixtures using brackets, clamps, tools or welding equipment., • Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing, observation and other methods., • Measure and mark pipes for cutting and threading., • Plan pipe system layout, installation or repair according to specifications., • Select pipe sizes and types and related materials such as supports, hangers and hydraulic cylinders according to specifications., • Practice good housekeeping skills and properly disposes of waste according to safety and environmental policies., • Understand and follow safety policies and procedures. 4.0 EDUCATION / EXPERIENCE / KNOWLEDGE The following education, experience and knowledge are preferred for this position: • Two to four years of pipe fitting experience and/or demonstrated ability to perform basic skills according to testing requirements., • Must have verbal skills with fluency for the responsibilities assigned. 5.0 WORK ENVIRONMENT/PHYSICAL DEMANDS • Exposure to possible shop hazards including but not limited to welding fumes, heat, flash burns, skin burns, high noise level and eye injuries from welding arc and grinders. Spends 100% of time in shop., • Perform physical activities that require considerable use of arms and legs. Walking, climbing, bending, stooping, and heavy lifting, pushing and pulling while handling material not exceeding forty five pounds.

Job Description Pipe Fitter Pay: $37.00/hour Shift: Monday – Friday, 1st shift Location: Pearland, TX Integrity Trade Services is hiring Pipe Fitters in Pearland, TX. to start at $37.00/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities: • Cut, thread, and hammer pipe to specifications using saws, torches, and pipe threaders, • Attach pipes to walls, structures, and fixtures with brackets, clamps, or welding, • Measure and mark pipes for cutting and threading, • Plan pipe system layout, installation, or repair according to specs, • Modify, clean, and maintain pipe systems and related equipment Qualifications: • 3-5 years of related experience, • High school diploma or equivalent, • Ability to lift up to 50 lbs and stand for long periods, • Must pass a weld test, • Tools required for pipe fitting Skills: • Pipe fitting, layout, and installation, • Welding and torch cutting, • Pipe threading, bending, and support installation, • Pipe system inspection and modification, • Use of hand and power tools Why choose Integrity Trade Services At Integrity Trade Services, we value our employees by offering a competitive weekly paycheck and a comprehensive benefits package, including medical, dental, and vision insurance. Join a reputable company that prioritizes safety, fairness, and career development. Interested? Click Apply and check your email for follow-up instructions to complete your candidate profile with us. For questions, please call or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #ZR #HIGH1

Job Description SPRINKLER CONSTRUCTION FITTER JOB DESCRIPTION Job Responsibilities include but are not limited to: • Learn by paying attention and participating with all that is being asked within all aspects of the fire sprinkler trade, • Assist foreman with installation, service, and trouble-shooting of automatic fire sprinkler systems along with all its related equipment, • Assist foreman with installation of fire sprinkler systems in residential, commercial, and industrial buildings, • Learn and use project drawings to accurately and entirely interpret and installation requirement details and layout as needed, • Learn to thread and groove pipe, cut hanger rods, frequently climb ladders, hang pipe, read blueprints, layout, keep clean work area, and use appropriate equipment for any specific job such as tools, lifts, etc., • Other duties as assigned Expectations: • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Ability to work overtime, out of town or on-call as needed Knowledge: • Basic Math and Reading, • Minimum education of High School Diploma or Equivalent Work Experience: • 1 year of experience as a fire sprinkler, or construction related helper, preferred Skills and Competencies: • Ability to take direction from upper management, • Must have valid state driver's license and good driving record, • Self-motivated, Ambitious, Interactive, Communicative, Detail-oriented and Organized, • Demonstrate ability to accurately read measurements from tape or scales

Job Description CHAMPION X Experienced CNC Machinist Schedule: Monday through Friday, shift starts at 5:00 AM to 1:30 PM, some daily overtime and weekend work will be required This position is responsible for setting up and operating all CNC lathes and CNC mills, to produce products to print specifications. This position also designs fixtures or work holding jigs Individual contributor Regular attendance and punctuality are expected upon accepting this position Properly follow company and OSHA safety procedures required including steeled toed shoes, safety glasses and other Personal Protective Equipment that is required in certain areas of the facility. Maintain high ethical standards Whats in it For You: The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best Thrive in a company that values sustainability, drives a safety-focused culture and empowers its employees through continuous improvement The chance to Improve Lives in our community with regular outreach and volunteerism opportunities The chance to join a learning and problem-solving culture What You Will Do: Operate CNC controlled metal-cutting and related processing machines and equipment. Machines and equipment included, but not limited to, turning lathes, vertical and horizontal mills, and saws for a wide range of differing materials Plan and performs setups, first article layouts, and execution of work according to product specifications, blueprints, drawings, and work instructions Inspect all materials, components, etc. to assure they meet the accepted quality standards Participate in Lean events with active involvement in Continuous Improvement initiatives Responsible for the safe operation of tools and machinery while performing daily tasks. Responsible for the reporting of unsafe acts or conditions to supervision immediately as noticed Must immediately shut down production and report safety or quality concern(s) to a supervisor, engineer, manager, EHS or Quality representative Ensure accurate movement of inventory through their assigned area transactions, production reporting, resolution of negatives, etc. Complete required inspection documentation, marking of heat numbers and hold tags Must employ Oracle to navigate and execute tasks to complete work orders, WIP transactions, material workbench, supply demand, material requirements Perform daily maintenance check sheet Operate forklift and pallet jack as required for tasks Report unsafe acts or conditions to supervision immediately as noticed Controlled metal-cutting and related processing Qualified to train others Can run standard work Assists in orienting, training, assigning, and checking the work of less experienced machinist Document training provided Complete and report PR's and ECN reports Perform first piece quality audits and roving audits as required Comprehensive understanding of the manufacturing process as it pertains to your respective production cell(s) Move material with motorized equipment Position Details: Candidate must reside in: Houston, TX or surrounding areas Work week and shift: Work week and shift: M-F 5AM-1:30 PM daily overtime is likely; weekend work may be required occasional Climate control warehouse, standing workstation, strenuous work often required PPE requirements include uniforms, safety glasses and steal toes among others (Most PPE provided, accept initially in contingency the steel toed shoes) Minimum Qualifications including Knowledge, Skills and Abilities (KSA's): High school diploma or GED 5 years of related CNC experience 2 years Manual machinist experience Experience in ERP systems KSA's Qualified to operate some machining equipment alone, meets expectations for quality and productivity, can handle some setups and all documentation alone Possess strong organizational skills and attention to detail Possess the ability to work quickly and accurately Ability to operate assembly and measuring tools properly and safely Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Requires ability to read, speak and write in English, follow verbal and written instruction Ability to read and interpret schematics and Bills of Material (BOM) Ability to use hand tools, power tools and measuring devices such as height gauges, calipers, micrometers, and thread gauges Ability to understand M-Code and G-Code programming Effectively use email to communicate (potential) risks to safety, quality, delivery, and productivity Must have a complete understanding of applicable middleware software applications and demonstrate the ability to navigate options Ability to use Windchill (Product Data Management application) Ability to use personal computer and/or workstation Ability to meet TAKT Time and quality standards Demonstrates good interpersonal, organizational, and problem-solving skills All knowledge, skills and abilities required at Machinist I level Able to work with limited supervisory guidance Must have a complete understanding of applicable middleware software applications and demonstrate the ability to navigate options Ability to use Quality Management Software Ability to interface with inter-departments to meet the goals of the business Experience training others Ability to operate and setup most machining equipment Edit M-Code and G-Code programming Lean and Continuous Improvement experience Preferred Qualifications Oracle ERP Middleware Certification CNC Machining trade school certificate Forklift certification Enable Skills-Based Hiring: No Worker Training Location N/A Is this role bonus eligible No Is this for a Pre-identified Candidate No Please provide Pre-identified Candidate details First & Last Name: Phone Number: Email Address: Pay Rate: Is this a Casual Worker No Please enter in Shift, Shift Premiums, Hours and Rotation Specifics for this role 1st Shift: 5AM to 1:30PM, M-F, Some overtime and weekend work required

Job Description Job Title: Quality Assurance / Quality Control Inspector (Entry-Level) Department: Quality Assurance / Quality Control (QA/QC) Shift: 1st Shift 6am-6pm Role Summary The Entry-Level QA/QC Inspector performs in-process, receiving, and final dimensional and visual inspections on forged, machined, and fabricated metal components (flanges, fittings, valves, and specialty forgings). Working under the supervision of the QA Manager / QC Supervisor, this role ensures all manufactured products adhere to ISO standards, customer specifications, engineering drawings, and industry codes (ASME/ASTM/API). Key Responsibilities • Dimensional & Visual Inspection: Perform first-piece, in-process, and final inspections of machined forgings, flanges, and piping components using basic hand precision measuring tools (calipers, micrometers, depth gauges, thread gauges, height gauges, and bore gauges)., • Blueprint & Drawing Review: Read and interpret standard manufacturing mechanical blueprints, process routing sheets, and tolerance callouts., • Traceability & Documentation: Verify heat numbers, material grade markings, and part serializations against Material Test Reports (MTRs) and job travelers to ensure complete product traceability., • Non-Conformance Reporting (NCR): Identify, flag, and quarantine out-of-spec or defective parts; log Non-Conformance Reports (NCRs) and collaborate with machine operators and production leads to determine root causes., • Testing & Calibration Support: Assist in organizing tools for routine calibration and support destructive/non-destructive testing (NDT) prep or hardness testing (e.g., Brinell/Rockwell) as trained., • Data Entry & Sign-Off: Enter daily inspection results and sign off on completion tags/routing packets within the internal production tracking or ERP/quality database., • Shop Safety & Cleanliness: Adhere strictly to plant PPE standards, safe lifting practices around overhead cranes/forklifts, and 5S workplace cleanliness. Qualifications & Requirements • Education: High School Diploma, GED, or equivalent trade school certificate., • Experience: 0–2 years of experience in a manufacturing, machine shop, industrial fabrication, or warehouse environment. Prior exposure to metal manufacturing or quality inspection is a plus, but entry-level candidates with mechanical aptitude will be trained., • Measurement Skills: Ability or demonstrated aptitude to learn standard mechanical inspection tools (micrometers, dial calipers, tape measures, pitch gauges)., • Blueprint Literacy: Basic understanding of reading technical drawings or mechanical schematics, with the ability to do basic shop math (fractions, decimals)., • Communication & Detail: High attention to detail, consistent documentation habits, and clear verbal communication to coordinate with machinists and shop supervisors., • Physical Demands: Ability to stand, bend, and move across a manufacturing shop floor throughout the shift; capable of lifting up to 40–50 lbs safely. Preferred Skills (Helpful but Not Required) • Exposure to ISO 9001 quality management systems., • Familiarity with API, ASTM, or ASME standards., • Basic familiarity with coordinate measuring machines (CMM) or optical comparators., • Experience in oil & gas, energy, heavy industrial, or forging/machining operations. \nCompany Description At Crosspoint Group, we connect talented professionals with organizations where they can build meaningful, long term careers. As a specialized recruiting partner across sectors like manufacturing, logistics, healthcare, aviation, and business operations, we take a hands on, relationship driven approach to hiring. We prioritize straightforward communication, transparency, and matching candidates with opportunities that align with their goals and strengths. Learn more about our approach and community commitment at crosspointgroup.org. At Crosspoint Group, we connect talented professionals with organizations where they can build meaningful, long term careers. As a specialized recruiting partner across sectors like manufacturing, logistics, healthcare, aviation, and business operations, we take a hands on, relationship driven approach to hiring. We prioritize straightforward communication, transparency, and matching candidates with opportunities that align with their goals and strengths. Learn more about our approach and community commitment at crosspointgroup.org.

Job Description Worldwide Oilfield Machine (WOM) is a globally recognized, multinational company that was established in 1980 with its headquarters based in Houston, Texas. With over 2,500 employees, the WOM group of companies is strategically located worldwide with manufacturing facilities, engineering centers, sales offices and assembly/testing workshops in Houston, Texas; Pune, India; Aberdeen, Scotland; Dubai, UAE; Seoul, South Korea; Jakarta, Indonesia; Ashgabat, Turkmenistan; and Singapore. We are currently seeking a qualified Manual Lathe Machinist to join our team at the Canemont facility located in SW Houston. The successful candidate will be responsible for setting up and operating manual lathe machines to produce quality parts in accordance with engineering drawings, specifications, and work instructions. Essential Responsibilities: • Removes and replaces dull cutting tools and attaches tools and work pieces to the lathe, • Adjusts machine settings and controls as necessary when problems arise, • Studies drawings and specifications to determine needed dimensions and tolerances, • Understand feeds and speeds on different materials, • Take first piece to inspection, • Report any machine problems or non-conformance product to supervisor, • Sign router on assigned sequence, mark or tag identification on all parts, • Make sure all instruments being used are calibrated, • Follow and comply with applicable work instructions, • Perform in-process inspection of every part as per print, • Keep machine and area clean, • Know and understand Quality Policy and comply with all requirements of the QMS, • Comply with all health and safety rules, • Ensures compliance and maintaining the processes/procedures of the WOM management systems, ISO 9001, ISO 14001 and ISO 45001, • Comply with all environmental, health and safety rules Requirements: • High School degree or equivalent, • 7 years’ related experience in a machine shop operating manual machines., • 7 years’ experience in large valve machining, experience in machining Inconel inlays, threading/taper thread, must have tool Abilities: • Ability to stand for long periods, • Lift/push/pull up to 50 pounds, • Ability to read measuring equipment, • Must be able to read drawings WOM offers long term, stable employment in a comfortable environment. WOM has an excellent compensation and benefits package, including: Company sponsored insurance, a 401(k) plan; paid holidays, and vacation.

Job Description About HPF: Houston Precision Fasteners produces high strength, close tolerance, fatigue rated fasteners using materials such as alloy steel, 718, titanium, waspaloy, A-286 and multiphase. Our fasteners support most current space programs as well as our nations fleet of military aircraft and weapon systems. We are dedicated to providing a superior product to our customers and seek only highly qualified people who take pride in their work to be part of our growing team. Job purpose: The CNC Mill & Wired EDM Programmer will be responsible for programming, setting up, and operating 3/4/5-axis CNC Milling machines and Wire EDM equipment to produce high-precision tooling, dies, fixtures, and specialized aerospace fastener components. The ideal candidate possesses deep hands-on expertise with offline CAM software (ESPRIT CAM strongly preferred), tight-tolerance machining, blueprint reading/GD&T, and experience machining high-temperature aerospace superalloys (e.g., Inconel 718, MP35N, A286, Titanium, and PH Stainless Steels). Key Responsibilities: • Develop, verify, and optimize G-code/M-code programs for multi-axis CNC Mills and Wire EDM machines using offline CAM software (ESPRIT preferred)., • Select optimal cutting strategies, speeds, feeds, wire tension, burn settings, and tooling configurations for aerospace materials and hard tooling., • Perform complete setups, workholding configuration, part prove-outs, and production runs on CNC Mills and Wire EDM machines., • Establish work offsets, zero points, wire threading parameters, and tool lengths accurately., • Design and fabricate custom workholding, soft jaws, and EDM holding fixtures to support fastener manufacturing processes (hot forging dies, trim dies, thread rolling tooling, trim plates)., • Perform first-piece and in-process dimensional inspections using precision measuring equipment (micrometers, calipers, optical comparators, height gauges, pitch micrometers)., • Interpret complex engineering drawings, CAD models, and ASME Y14.5 GD&T callouts to ensure zero-defect compliance under AS9100 quality management standards., • Perform routine preventive maintenance on CNC mills and Wire EDM units (dielectric fluid management, wire guide inspection, filtration systems)., • Troubleshoot machining anomalies, tool wear, chatter, and program errors to improve cycle times and tool life. Required Qualifications: • 3+ years of experience programming, setting up, and operating both CNC Mills and Wire EDM machines in a precision manufacturing environment (Aerospace, Defense, or Medical preferred)., • Proven offline CAM programming experience. ESPRIT CAM proficiency is strongly preferred (SolidWorks/Mastercam experience is a plus)., • Experience working with high-temperature nickel alloys, cobalt alloys, stainless steels, and tool steels (Inconel, A286, MP35N, H13, D2)., • Expert knowledge of GD&T (ASME Y14.5) and engineering drawing interpretation., • Deep understanding of G-code programming, macro variables, machine controls (Haas, Fanuc, Heidenhain, Mitsubishi, Charmilles, or ONA)., • Proven experience in part setup, fixture design, and precision alignment., • High School Diploma or GED required; Machinist Apprenticeship, Trade School Certificate, or Associate Degree in Precision Machining/Manufacturing Technology highly preferred. Physical Requirements & Work Environment: • Ability to lift up to 40 lbs. independently., • Ability to stand, walk, bend, and work in a precision machine shop setting for extended periods., • Strict adherence to safety protocols, personal protective equipment (PPE), and AS9100 quality procedures. Employee Acknowledgement: The above information on this description has been designed to indicate the general nature and level of work performed by HPF employees. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Due to nature of defense contracts, US Citizenship is a requirement. As part of our Drug and Alcohol Policy, upon acceptance of any offer of employment, employment will be conditional of passing a required drug. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities \nCompany Description We are a fast growing manufacturer of precision aerospace products. We have won numerous awards for our contributions to the defense and space industries including supplier of the year to NASA in 2013. We pride ourselves on doing things our competitors cannot and are striving to be the most technologically advanced, highest rated supplier to our customers across all product lines. In 2024, HPF was acquired by the Poggipolini company based in Italy. We are a fast growing manufacturer of precision aerospace products. We have won numerous awards for our contributions to the defense and space industries including supplier of the year to NASA in 2013. We pride ourselves on doing things our competitors cannot and are striving to be the most technologically advanced, highest rated supplier to our customers across all product lines. In 2024, HPF was acquired by the Poggipolini company based in Italy.

Job DescriptionDescription: The Quality Inspector works in conjunction with other QA personnel to support production. The QA Mechanical Inspector will use basic mechanical inspection tools and gauges to ensure a successful product line. Responsibilities not limited to: 1. Assurance of material criteria establishment • Inspects incoming raw materials and components for conformance verification of traceability to existing inspection plans, customer/VMC drawings, sales and purchase orders, • Initiate and manage the MRB (Material Review Board) process 1. In Process Product Inspection • Inspects the integrity of the product to the order with respect to dimensions, correct components, color, etc., • Randomly samples the in process product to ensure specifications and dimensional checks, • Identifies manufactured products that do not meet quality specifications, • Documents inspection results by completing reports and logs; summarizing re-work and waste 1. Final Product Inspection • Ensures final product meets the specific customer order, • Reviews the final sign off on the traveler or work order to release the product to shipping., • Collects quality data for accept and reject rates in all areas 1. Other Duties as Assigned Requirements: Knowledge/Skills/Abilities • Basic knowledge of Microsoft Office, Excel and Word, • Working knowledge of calibration of gauges and ability to use calipers, height gauges, thread gauges, etc., • Ability to read and interpret blueprints and apply knowledge to inspection of products, • Knowledge of ANSI Y14.5 symbology Competencies • Strong attention to detail, • Proven verbal and written communication skills, • Self-starter with an independent work approach, • Strong integrity and ethics, • Excellent organizational skills with ability to frequently re- prioritize Minimum Qualifications • High School diploma or GED, • 1-3 years of experience in a mechanical inspection environment, • Experience with ISO 9001 or similar a plus Working Conditions/Physical Requirements • Able to stand for long periods of time, • Able to lift, push, and pull 50 pounds unassisted Work Environment • Typical machine shop environment, • Willing and able to work additional hours as needed ------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group and companies we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description Job Purpose The Threadline Inspector will Inspect threads on joints of tubular pipe to detect defects and to determine conformance to specified tolerances in taper, lead, and threads per inch, using precision gauges and instruments. Duties & Responsibilities Responsible for the inspection of threads in conformance to the required specification. Ensure that all inspection gauges and instruments conform to proper standards and calibration. Proper storage of gauges before and after daily shifts. Spot check other processes for quality conformance and report findings to supervisor. Inspect threads for conformity to company, API, and customer standards or specifications. Mark threads for identification and traceability. Verify material for identification per the Work Order. Communicate any concerns with the Thread Operator as well as gathering feedback throughout the first and last article of the threading process. Fill out the Daily Production/Inspection Report. Follow all instructions as delegated by the Quality System. Other duties as assigned. Qualifications / Competencies Education: o High School Diploma or GED preferred but not required. Years of Experience: o At least three months on the job training, or previous work experience in all inspection procedures and methods in order to qualify products to meet the required specifications. Job Knowledge: o At least Knowledge and experience within the OCTG pipe inspection industry is preferable. o Basic reading, writing, and arithmetic skills required. o Manual dexterity required for operating machinery, hand tools and handheld technical devices. Personal Competencies: o Excellent verbal and written communication skills. o Employee must be able to work with a flexible schedule which may require over-time. Safety: o Understands all applicable location safety rules and regulations and makes sure that all are being followed. Physical Requirements & Working Conditions Working conditions are normal for a manufacturing environment. Loose fitting clothes and jewelry are not permitted on site. The ability to lift 25/50 pounds regularly. The ability to respond quickly to sounds. The ability to move safely over uneven terrain or in confined spaces. The ability to see and respond to dangerous situations. The ability to safely climb ladders while carrying 40 pounds. The ability to work in loud, hot environments/extreme weather while wearing required PPE. Ability to see 20-20 when corrected. Ability to identify and distinguish colors.

Job Description Project Location: Houston, TX Pay Range: $31.00–$35.00 Per Diem: $80 per day worked Job Summary Blukers is seeking an experienced Journeyman Pipefitter for an industrial construction project in Houston, TX. Qualified candidates must have experience in pipe layout, installation, weld joint preparation, and the testing and commissioning of piping systems. Qualifications • 5+ years of experience in industrial construction as a journeyman pipefitter., • 3+ years of experience in the testing and commissioning of piping systems., • Basic rigging skills., • Proficiency in small power tools, including die grinders and right-angle grinders., • Ability to read and comprehend piping isometric drawings and support details/drawings., • Ability to read piping and instrument diagrams preferred., • Proficiency in pipe layout and efficient work planning., • Understanding of the use of all types of personal fall arrest systems. Responsibilities • Prepare weld joints to meet project codes and standards., • Perform pipe layout and thread pipe using a threading machine., • Assist in lifting, positioning, and securing materials and workpieces during installation., • Clean and perform minor maintenance on tools and equipment., • Adhere to all safety procedures. Physical and Work Requirements • Safely traverse uneven terrain while carrying tools and building materials., • Climb vertical ladders and work at heights as necessary., • Access scaffolding. Benefits and Career Development • Retention and service recognition incentives., • Tuition reimbursement., • Paid time off., • Two paid holidays., • Career development opportunities, including apprenticeships and upskilling., • Leadership development., • Long-term work opportunities and training and development programs. Equal Opportunity Employment Blukers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, or any other characteristic protected by law.

Job DescriptionBe the expert behind precision threads Join a manufacturing team dedicated to producing high-quality fasteners—nuts, bolts, and other threaded metal parts. As a Landis Thread-Cutting Machinist, you’ll run and fine-tune Landis equipment to create accurate threads that meet exacting specs, shift after shift. A day in the life • Set up Landis thread-cutting machinery, selecting and adjusting tooling to meet job requirements., • Run production to create threaded components that match dimensional and quality standards., • Inspect parts with thread gauges and precision measuring instruments; make corrections proactively., • Troubleshoot threading issues and optimize machine performance for consistency and throughput., • Document results, maintain line readiness, and keep a clean, safe workspace. What you bring, • Hands-on experience with Landis machines or thread-cutting operations (preferred)., • Comfort with machine setups and tooling changes., • Ability to verify threads using gauges and measurement tools with precision., • Background in general machining or fastener manufacturing is a plus., • Strong attention to detail and a quality-first mindset., • Valid driver’s license. Pay $22–$28 per hour, commensurate with experience. You should be proficient in • Machine Setup, • Threading, • Machining Machines & technologies you’ll use, • Thread Rolling Machine, • Threading, • Landis

Job DescriptionCNC Machinist | $20-26 an hour – 2 openings Day / 2 Openings Night shift | Monday through Saturday 6 to 6 – Must be open to work on Sundays as needed. What Matters Most • Competitive Pay rate $20-26 an hour, • Schedule: Monday through Saturday 6 to 6; Sunday if needed (Required), • Location: Channelview area, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus program Job Description We are seeking 2 highly qualified CNC Machinists with premium threading experience for full-time night shift positions. Responsibilities:, • Perform complete CNC machine setup in all aspects, • Set up and thread all premium threads across various products and materials with minimal supervision, • Troubleshoot machining issues and make program edits as needed, • Assist the Leadman/Supervisor with training Level 1, 2, and 3 CNC Machinists, • Perform dimensional inspections per required specifications, • Maintain product traceability throughout the manufacturing process, • Meet or exceed all KPIs and non-conformance offset requirements, • Complete required documentation, • Report all non-conformances to the Leadman/Supervisor, • Follow all requirements of K&B’s safety program, • Perform other duties as assigned Qualifications and Requirements:, • Proven experience with premium threading, • Strong attention to detail, • Experience with Fanuc controls, • Stable work history, preferably in an industrial setting., • Reliable transportation., • Commitment to safety and adherence to protocols., • Positive attitude and strong teamwork skills., • Capable of working in extreme weather and performing physical tasks. Benefits and Perks:, • Pay Rate: $20 -26 an hour, • Medical, Dental, Vision Insurance, • Weekly Pay, • Holiday Pay and Referral Bonuses, • Opportunities for Training & Career Growth Your New Organization Work for a well-established company in the threading and machining industry, known for its high-quality standards and commitment to safety. You'll be part of a supportive, skilled team and can build a long-term career through hands-on training and advancement potential. Your Career Partner The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. We value diversity and encourage applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.

Job Description Why Join Us At Vallourec, we are seeking individuals whose passion and dedication match the strength and resilience of the steel we produce. The Gauge Lab Technician is responsible for calibrating gauges, inspecting hand tools, and adjusting gauge intervals in accordance with API specifications. This role ensures traceability records are created and maintained, linking back to NIST standards. Your Day-to-Day Impact You’ll play a vital role in our Quality team by: • Ensure safe working practices., • Maintain and calibrate gauges., • Manage drift inventory., • Conduct receiving inspections of critical parts., • Audit production lines., • Document calibrations and gauge repairs., • Maintain housekeeping standards in the gauge room. What You Bring We’re looking for candidates who are sharp, safety-focused, and ready to roll up their sleeves: • Thorough understanding of API specifications related to tubular goods., • Experience or training in the care and maintenance of measuring and test equipment., • Proficiency in API Thread Gauging., • Strong communication skills and ability to maintain historical records of gauge certifications and repairs., • Directable, teamwork-oriented, adaptable, accountable, reliable, and proactive., • Safety awareness, ability to give and receive constructive feedback, pride in performance, commitment to continuous improvement and quality, effective communication, positive response to change, and high attention to detail. What You’ll Gain • Get paid for what you know - and earn more as you learn more., • Opportunities to work on cutting-edge equipment, • A culture that values your input and celebrates improvement, • Real growth potential in a stable, essential industry And Benefits that Include: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Discretionary Performance-Based Bonus Program, • Tuition Reimbursement Safety isn’t negotiable, it’s who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don’t cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it’s a promise we make to every colleague, every day.

Job Description Quality Technician Location: Spring, TX 77388 Compensation: $20 - $25 /hour DOE Schedule: M- F, 6:00am - 2:30pm, OT as required • Must be able to understand written and/or verbal work instructions, • Must be able to understand various Quality Plans, • Threading to specified requirements, • Complete visual inspection of threads, including internal coupling threads and external pup joint threads, • Must be able to inspect all thread elements, including:, • Thread length, • Thread height, • Thread lead, • Thread Taper, • Standoff, • Lc Length, • Verify wall thickness, • Visual inspection of ID, • Must maintain & care for Inspection, Measuring & Test Equipment (IMTE)., • Must maintain clean & safe work area, • Must complete all coupling and pup joint inspection documentation, • Constant communication with Thread Machine Operator to maintain thread tolerances, • Notifying Quality Control Manager if IMTE are not functioning properly, • Operate inspection, measuring & test equipment in a safe & reasonable manner \nCompany Description Today’s job market is ultra-complex. Placing just the right people into just the right jobs doesn’t happen by chance. It’s a science. At PrideStaff, we’ve mastered the art of staffing to help our clients and candidates achieve their goals. Whether you’re a company looking for a true partner, or a job seeker looking to land a new position, PrideStaff experts eliminate guesswork and get results. Today’s job market is ultra-complex. Placing just the right people into just the right jobs doesn’t happen by chance. It’s a science. At PrideStaff, we’ve mastered the art of staffing to help our clients and candidates achieve their goals. Whether you’re a company looking for a true partner, or a job seeker looking to land a new position, PrideStaff experts eliminate guesswork and get results.

Job Description Custom Air Products & Services, Inc. (CAPS) is a Houston-based, full-service HVAC company specializing in the design, fabrication, installation, and servicing of industrial and commercial air conditioning and heating systems. Since 1996, CAPS has built a reputation for delivering high-quality, custom-engineered solutions to customers across a wide range of industries. With a team of skilled professionals and multiple Texas-based facilities, CAPS provides end-to-end capabilities including HVAC manufacturing, mechanical field services, and parts distribution. As part of AirX Climate Solutions, we are committed to safety, quality, and customer satisfaction—creating a team-oriented environment where employees can grow, contribute, and support essential operations across the industries we serve. We are currently seeking a Pipe Fitter to add to our growing team. Location: 35 Southbelt Industrial Drive, Houston, TX 77047 Position Summary & Objective The Pipe Fitter is responsible for the layout, fabrication, assembly, installation, maintenance, and repair of piping systems used in commercial and industrial HVAC and process applications. This role requires the ability to interpret drawings and specifications, accurately measure and prepare materials, and install piping systems in accordance with project requirements, industry standards, and safety regulations. Experience with Victaulic piping systems is required. Key Responsibilities • Interpret and work from engineering drawings, blueprints, isometrics, and specifications., • Prefabricate piping components for field installation and welding operations., • Lay out piping systems and coordinate installation activities with project managers, supervisors, and other trades., • Select appropriate pipe sizes, materials, fittings, supports, hangers, and associated hardware., • Measure, cut, groove, thread, bevel, and prepare pipe using hand tools, power tools, grooving machines, and cutting torches., • Install piping systems for chilled water, hot water, heating, cooling, lubricating, and industrial process applications., • Assemble and secure pipes, valves, supports, brackets, and fixtures according to project specifications., • Install and maintain hydraulic and pneumatic piping systems and related equipment as required., • Perform system modifications, maintenance, troubleshooting, and repairs., • Inspect completed work to ensure compliance with quality standards and project requirements., • Identify and resolve issues such as leaks, obstructions, damaged components, or system deficiencies., • Follow all company safety policies, procedures, and OSHA regulations., • Maintain a clean and organized work area and properly care for company tools and equipment., • Communicate effectively with supervisors, coworkers, and customers as needed. Qualifications & Skills • Minimum of 2 to 3 years of pipe fitting experience; vessel fitting experience may be considered., • Demonstrated experience with Victaulic piping systems., • Ability to read and interpret blueprints, drawings, and piping specifications., • Working knowledge of commercial and industrial piping installation practices., • Ability to safely use hand tools, power tools, grooving equipment, and cutting torches., • Strong mathematical and measuring skills., • Ability to work independently and as part of a team., • Commitment to workplace safety and quality workmanship, • Pipe cutting, threading, grooving, and fitting techniques., • Operation of saws, grooving machines, cutting torches, and precision measuring tools., • Mechanical aptitude and problem-solving skills., • Strong attention to detail and accuracy., • Excellent time management and organizational skills. Preferred Qualifications • Experience in commercial or industrial HVAC piping systems., • Rigging, hoisting, or welding knowledge., • OSHA safety training or related certifications. Physical Requirements & Work Environment • Frequently lift, carry, push, and pull materials weighing up to 50 pounds., • Ability to stand, walk, bend, kneel, crouch, climb, and work in confined spaces for extended periods., • Ability to work at heights, on ladders, and from aerial lifts when required., • Ability to work in varying indoor and outdoor environmental conditions., • Commercial and industrial construction job sites., • Exposure to noise, dust, temperature fluctuations, and construction-related hazards., • Use of personal protective equipment (PPE) is required. To learn more about us, please visit us on our website. At Custom Air Products & Services, we are an equal opportunity employer and are committed to creating an inclusive environment for all employees. All employment decisions are made without regard to protected status and are based on qualifications, merit, and business needs. Employment is contingent upon the successful completion of a pre-employment background check and drug screening, conducted in accordance with applicable laws.

Job Description We are seeking experienced Pipe Fitters to install, assemble, and maintain piping systems for commercial and industrial applications. The ideal candidates will have experience working with various piping materials and ensuring high-quality installations that comply with industry standards and regulations. Key Responsibilities: • Install, inspect, and repair piping systems, including water, gas, and industrial piping., • Cut, thread, weld, and assemble pipes using various tools and techniques., • Read and interpret blueprints, schematics, and specifications to determine the layout and installation of piping systems., • Ensure compliance with safety regulations, industry codes, and project requirements., • Test piping systems for leaks using pressure gauges and other testing equipment., • Work closely with other trades, including welders, plumbers, and general contractors., • Maintain an organized and safe work environment, adhering to OSHA standards., • Train and mentor apprentices and junior pipe fitters. Qualifications:, • High school diploma or equivalent., • Minimum of 3-5 years of experience in pipe fitting for commercial or industrial projects., • Ability to read and interpret blueprints, technical drawings, and piping schematics., • Experience working with a variety of pipe materials, including steel, copper, and PVC., • Proficiency in using pipe fitting tools, including cutting, threading, and welding equipment., • Strong problem-solving and troubleshooting skills., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license with a clean driving record., • Ability to pass background check and drug screening. Preferred Skills:, • Certification in pipe fitting or welding., • Experience with industrial piping systems and HVAC piping., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job DescriptionBe the Style Expert at Buck Mason as a Stylist! Love helping folks find their perfect look? As a Stylist at Buck Mason, you’ll deliver exceptional customer service, assist customers with their purchases, and keep our store looking sharp. Responsibilities: • Customer Care: Greet customers warmly, listen to their needs, and provide personalized styling tips., • Product Expert: Stay ahead of fashion trends and know our products inside and out., • Sales Star: Meet and exceed individual sales targets and contribute to store goals., • Store Upkeep: Ensure the store is clean, organized, and visually appealing.Required Skills:, • 0+ years of experience in the retail or service industry, • Charming as all get-out – you know how to make customers feel like VIPs., • A knack for personal style that's sharper than a tailor's needle., • Thrive in a fast-paced environment and can juggle customer needs like a boss., • Attention to detail is your middle name – you'll spot a loose thread from a mile away., • Can rock a POS system and handle basic computer tasks with ease., • Love being part of a team and keeping the vibe positive and fun., • Sales skills that could sell ice to a polar bear – meeting targets is just another day at the office., • Work occurs on a variable schedule which could include early mornings, mornings, afternoons, evenings, late nights or overnights as well as weekends and holidays. Here at Buck Mason, we're all about transparency and fairness, especially when it comes to compensation. While the base salary range for this role is $16-$19 per hour, your total compensation package will also include commission of 2% of your individual sales. Founded in 2013 by Sasha Koehn and Erik Allen Ford, Buck Mason makes simplified clothing for the modern man. At the heart of everything we do is the unclouded California ethos of quality, restraint, and integrity. We take iconic pieces and reconstruct them in hard-wearing fabrics, with timeless details, and the perfect fit. Our goal is to offer fashion that is less complicated, building pared-down essentials that live beyond a single season. With its corporate offices headquartered in Los Angeles, Buck Mason's retail footprint extends from sea to sea, through e-commerce and brick-and-mortar locations in Los Angeles, San Francisco, New York, Brooklyn, and more. Join us at Buck Mason, where style meets substance, and every team member plays a vital role in our success. Ready to make your mark? Apply now! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCHAMPION X Experienced CNC Machinist Pay Rate: *- * per hour Schedule: Monday through Friday, shift starts at 5:00 AM to 1:30 PM, some daily overtime and weekend work will be required This position is responsible for setting up and operating all CNC lathes and CNC mills, to produce products to print specifications. This position also designs fixtures or work holding jigs Individual contributor Regular attendance and punctuality are expected upon accepting this position Properly follow company and OSHA safety procedures required including steeled toed shoes, safety glasses and other Personal Protective Equipment that is required in certain areas of the facility. Maintain high ethical standards What s in it For You: The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best Thrive in a company that values sustainability, drives a safety-focused culture and empowers its employees through continuous improvement The chance to Improve Lives in our community with regular outreach and volunteerism opportunities The chance to join a learning and problem-solving culture What You Will DO: Operate CNC controlled metal-cutting and related processing machines and equipment. Machines and equipment included, but not limited to, turning lathes, vertical and horizontal mills, and saws for a wide range of differing materials Plan and performs setups, first article layouts, and execution of work according to product specifications, blueprints, drawings, and work instructions Inspect all materials, components, etc. to assure they meet the accepted quality standards Participate in Lean events with active involvement in Continuous Improvement initiatives Responsible for the safe operation of tools and machinery while performing daily tasks. Responsible for the reporting of unsafe acts or conditions to supervision immediately as noticed Must immediately shut down production and report safety or quality concern(s) to a supervisor, engineer, manager, EHS or Quality representative Ensure accurate movement of inventory through their assigned area transactions, production reporting, resolution of negatives, etc. Complete required inspection documentation, marking of heat numbers and hold tags Must employ Oracle to navigate and execute tasks to complete work orders, WIP transactions, material workbench, supply demand, material requirements Perform daily maintenance check sheet Operate forklift and pallet jack as required for tasks Report unsafe acts or conditions to supervision immediately as noticed Controlled metal-cutting and related processing Qualified to train others Can run standard work Assists in orienting, training, assigning, and checking the work of less experienced machinist Document training provided Complete and report PR's and ECN reports Perform first piece quality audits and roving audits as required Comprehensive understanding of the manufacturing process as it pertains to your respective production cell(s) Move material with motorized equipment Position Details: Candidate must reside in: Houston, TX or surrounding areas Work week and shift: Work week and shift: M-F 5AM-1:30 PM daily overtime is likely; weekend work may be required occasional Compensation package offered: * - * per hour Climate control warehouse, standing workstation, strenuous work often required PPE requirements include uniforms, safety glasses and steal toes among others (Most PPE provided, accept initially in contingency the steel toed shoes) Minimum Qualifications including Knowledge, Skills and Abilities (KSA's): High school diploma or GED 5 years of related CNC experience 2 years Manual machinist experience Experience in ERP systems KSA's Qualified to operate some machining equipment alone, meets expectations for quality and productivity, can handle some setups and all documentation alone Possess strong organizational skills and attention to detail Possess the ability to work quickly and accurately Ability to operate assembly and measuring tools properly and safely Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Requires ability to read, speak and write in English, follow verbal and written instruction Ability to read and interpret schematics and Bills of Material (BOM) Ability to use hand tools, power tools and measuring devices such as height gauges, calipers, micrometers, and thread gauges Ability to understand M-Code and G-Code programming Effectively use email to communicate (potential) risks to safety, quality, delivery, and productivity Must have a complete understanding of applicable middleware software applications and demonstrate the ability to navigate options Ability to use Windchill (Product Data Management application) Ability to use personal computer and/or workstation Ability to meet TAKT Time and quality standards Demonstrates good interpersonal, organizational, and problem-solving skills All knowledge, skills and abilities required at Machinist I level Able to work with limited supervisory guidance Must have a complete understanding of applicable middleware software applications and demonstrate the ability to navigate options Ability to use Quality Management Software Ability to interface with inter-departments to meet the goals of the business Experience training others Ability to operate and setup most machining equipment Edit M-Code and G-Code programming Lean and Continuous Improvement experience Preferred Qualifications Oracle ERP Middleware Certification CNC Machining trade school certificate Forklift certification

Job Description Quality Control Inspector II / III – Hydrostatic Testing (Night Shift) Location: North Houston, TX (Willowbrook Area) Pay: $17.00–$20.00 per hour, depending on experience Shift: Night Shift | 5:00 PM – 5:00 AM Schedule: 12-hour shifts with some weekend availability required Job Summary We are seeking an experienced Quality Control Inspector II or III with hands-on hydrostatic pressure testing experience to join a growing manufacturing operation in North Houston. This position is responsible for inspecting machined and assembled components, ensuring products meet quality standards, and supporting manufacturing testing operations as needed. The QC Inspector will also serve as a backup to the Manufacturing Testing Technician, performing hydrostatic pressure tests, Factory Acceptance Testing (FAT), and plug production testing. The ideal candidate has experience in precision manufacturing, oilfield equipment, or downhole tools, is proficient with inspection equipment, and can work independently during night-shift operations. Candidates must have at least 3 years of manufacturing QC inspection experience and hands-on hydrostatic testing experience to be considered. Key Responsibilities Quality Control & Inspection • Perform receiving, in-process, and final inspections of machined and assembled components., • Inspect parts for defects, dimensional accuracy, and compliance with engineering specifications., • Use precision measuring instruments, including calipers, micrometers, thread gauges, height gauges, and optical comparators., • Read and interpret blueprints, engineering drawings, and manufacturing specifications., • Perform first article inspections as required., • Identify and document nonconforming materials and products., • Maintain accurate inspection records and quality documentation., • Support calibration activities and Non-Conformance Reports (NCRs)., • Communicate quality concerns to production and management teams. Hydrostatic Testing & Test Bay Support • Perform hands-on hydrostatic pressure testing of machined and assembled components., • Assist with Factory Acceptance Testing (FAT) and plug production testing., • Set up, operate, and monitor pressure-testing equipment according to established procedures., • Identify leaks, pressure failures, and other testing abnormalities., • Record testing results accurately in company databases and Microsoft Excel., • Prepare and distribute completed test reports within required deadlines., • Serve as a backup to the Manufacturing Testing Technician., • Follow all established testing procedures, safety protocols, and PPE requirements. Required Qualifications • Minimum 3 years of Quality Control inspection experience in a manufacturing environment., • Hands-on hydrostatic pressure testing experience required., • Experience inspecting machined or assembled components., • Proficiency using precision measuring instruments and gauges., • Ability to read and interpret blueprints, technical drawings, and manufacturing specifications., • Experience with thread gauges and optical comparators strongly preferred., • Basic computer skills, including Microsoft Excel and electronic documentation systems., • Strong attention to detail and ability to identify defects and dimensional discrepancies., • Ability to work independently with minimal supervision., • Strong communication and documentation skills., • High school diploma or GED required., • Ability to work night shifts and occasional weekends. Preferred Experience • Oilfield equipment or downhole tool manufacturing., • Precision machining or CNC manufacturing environments., • Hydrostatic pressure testing of industrial components., • Factory Acceptance Testing (FAT) and plug production testing., • Thread gauge inspection and optical comparator measurement., • Faro Arm inspection systems. Physical Requirements • Ability to stand for extended periods during a 12-hour shift., • Ability to lift up to 50 lbs. repeatedly without assistance and up to 100 lbs. with assistance., • Ability to push and pull heavy objects using appropriate equipment., • Ability to work safely around manufacturing machinery and pressure-testing equipment., • Must wear required PPE, including safety glasses and steel-toe footwear. Apply Today If you have a strong background in manufacturing quality inspection and hands-on hydrostatic testing experience, we encourage you to apply for this night-shift opportunity. \nCompany Description At LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort. Our unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas. At LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort.\r\n\r\nOur unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.

Job Description About VK Capital Ventures Inc. runs Travel Villa Kitchen — a Houston chef co-op, cooking-class and private-dinner company (plus Six Rows Coffee and Farm2Chef, our farmer-chef marketplace). We promise a luxury-level experience to customers and employees, and we are Human First service practitioners: healthy communication, and people happy and emotionally safe in service. We are hiring a CX Analyst to measure that experience and prove it with data, so CX here is a system, not a slogan. Responsibilities • Build and run the CX scorecard inside the weekly snapshot: response times vs. our same-business-day standard, thread resolution, review volume and rating, complaint themes — by lane (dinners, classes, coffee, marketplace), • Operationalize our customer/market tracking file: every data point mapped to one live decision (audience, offer, or channel) — no orphan statistics, • Run the review/testimonial pipeline: every event and delivery generates a review ask inside 24 hours; results feed our audience segments, • Run the employee-experience pulse: a short internal survey plus findings to the founders with the monthly report. Qualifications • Market-research or CX analytics experience, • Survey literacy — you can spot a leading question, • The same-business-day reply discipline, personally, • Discretion with customer data, • Nice to have: Nielsen/NielsenIQ data familiarity, hospitality CX, Spanish. Schedule Contract, 0.5 FTE — weekly scorecard cadence plus the monthly report cycle. Benefits • $40,000 contract (0.5 FTE), • Your scorecard is read by the founders weekly and steers real decisions, • A written role SOP and growth path from day one. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description Description VAM USA currently has an opening for a QC Inspector at their Houston, Texas location. VAM USA is the world leader for premium connection solutions for the oil and gas industry with numerous production facilities, three leading edge technology Research & Development centers and a network of over 160 licensees worldwide. Key Responsibilities include: • Set up all hand tools readily accessible to the job being performed., • Review work order packet for job to verify correct product is to be produced., • Assure Log Sheets are correct for the product to be produced., • Coordinate with the Gage Lab for proper gages to measure product., • Assure gages are mastered and set as required after production starts, as well as during production operation as required., • Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer., • Identify all rejected product on Log Sheet and describe reason., • Identify all rejected physical product as per instructions and alert operator., • Assure all First and Last Article inspection is conducted as required., • Alert operator and Foreman if cause of rejection persists and participates in resolving of reason for rejection., • Assure that material for order is correct as described on the work order., • Alert Foreman and Gage Lab of any concerns regarding performance of gaging or measurement instruments., • Follow all applicable work instructions, specifications and requirements., • Assist in training of inexperienced inspectors., • Follow all Company Rules, Procedures and Policies., • Follow all Company Safety Rules., • Any other duties as assigned by Foreman or Manager Requirements • High School education or equivalent, required, • Three (3) years previous experience in thread manufacturing., • Ability to read, write and speak English., • Working knowledge of blueprint reading, shop math, geometry, trigonometry, and non-destructive testing., • Should be able to lift and move objects weighing up to 50 lbs. and push/pull 75 lbs., • Ability to understand and execute instructions well.

Job Description PipefitterPasadena, TX Mechanical Description CIMA is an industry leader in self-performing a wide variety of construction and environmentally sensitive projects. Our “Core Values” leads us to a proven track record of successfully completing complex industrial projects. Our belief is that our success is due largely in part to CIMA’s philosophy of staffing complex projects with highly qualified personnel who have direct project experience. We offer a competitive benefits package which all new hires are eligible after 60 days of employment, which include: · Medical Insurance · Dental Insurance · Vision Insurance · Health Saving Account · 401k Matching · Life Insurance · Critical Illness Insurance · Accident Insurance Pipefitter will be responsible to lay out, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems. Job Duties: • Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders., • Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints., • Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints., • Measure and mark pipes for cutting or threading., • Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods., • Plan pipe system layout, installation, or repair, according to specifications., • Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment., • Modify, clean, or maintain pipe systems, units, fittings, or related machines or equipment, using hand or power tools., • Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications., • Cut or bore holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools., • Install automatic controls to regulate pipe systems., • Shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches., • Remove and replace worn components., • Inspect work sites for obstructions or holes that could cause structural weakness. Requirements • High school diploma preferred., • 1 to 2 years of general construction., • Basic plus., • TWIC card.

Job Description SUMMARY Tends one or more machine tools, or special-purpose machines, to manufacture metal workpieces to specifications on a production and piecework basis by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Set up and operate Swiss-type CNC turning centers, Tsugami brand preferred, in both guide-bushing and chucker-kit (non-guide-bushing) configurations., • Program, edit, and troubleshoot on Fanuc controls as applied to Swiss-type lathes (e.g., Fanuc 32i-B series or equivalent Swiss-specific control), including tool offsets, geometry, and main/sub-spindle synchronization., • Perform complete machine setups, including guide bushing selection and adjustment, collet and bushing changes, cross/back working tool alignment, gang and turret tooling, and bar feeder or sub-spindle pick-off setup., • Create and edit CNC programs using CAM software such as ESPRIT (Swiss-Type module) and/or SolidWorks with SolidCAM for Swiss machining; able to program from 3D CAD models and post-process for Fanuc-controlled Swiss-type platforms., • Machine aerospace-grade and other exotic materials (e.g., titanium, Inconel and other nickel alloys, Hastelloy, 17-4PH and high-temperature stainless), accounting for work hardening, tool wear, and thermal expansion., • Produce roll-threaded (thread-forming) parts in Swiss configuration, including thread rolling tool/die setup, feed and speed optimization, and inspection of rolled threads (pitch diameter, lead, and thread ring/plug gauging)., • Read and interpret aerospace-industry drawings and specifications, including GD&T and First Article Inspection (FAI) requirements, and maintain material/process traceability consistent with aerospace quality systems (e.g., AS9100)., • Diagnose and correct dimensional and surface-finish issues unique to Swiss-type turning, such as chatter, guide bushing wear, and deflection on long or slender parts. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to reach with hands and arms and talk or hear. The employee is occasionally required to stand; walk; sit; and stoop, kneel, or crouch. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EEO

Job Description Connect Staffing is hiring an experienced Quality Control Inspector / CMM Operator for a manufacturing plant in Houston, TX. This is a temp-to-hire overnight position paying $25–$30/hr depending on experience, with approximately 20 hours of overtime required per week. In this role, you will set up, program, and operate Coordinate Measuring Machine (CMM) equipment to perform dimensional inspections of manufactured parts, evaluate results against contract specifications, and approve or reject product. This is a long-term placement with consistent weekly overtime, making it a strong earning opportunity for an experienced CMM professional. Pay: $25–$28/hr depending on experience Schedule: Monday–Friday, 5:00 PM – 5:30 AM Location: Houston, TX Job Type: Temp-to-Hire Primary workplace language(s): English Work Environment: Manufacturing Plant / Factory Overtime: Weekly OT required (~20 hrs/wk) Responsibilities • Perform probe calibration, part alignment, and measurement routines to produce accurate dimensional inspection results on manufactured parts., • Troubleshoot CMM equipment and programs to identify root causes of measurement errors and take corrective action or escalate as needed., • Measure angular dimensions, radii, contours, clearances, thread lead, surface finish, and other geometric specifications., • Inspect and verify accuracy of gauges and measuring instruments for conformance to specifications., • Write Non-Conformance Reports (NCRs) documenting identified deficiencies, affected parts, and required disposition., • Communicate inspection findings and dimensional discrepancies directly with Engineering, Sales, and Customer Service teams. Minimum Requirements • 2+ years of hands-on experience operating and programming CMM (Coordinate Measuring Machine) equipment in a manufacturing environment. Preferred Qualifications • Experience with CMM programming software such as Calypso, SolidWorks, Checkmate Renishaw, or Measure Max., • Background in dimensional inspection of machined, fabricated, or processed metal components., • Experience reading and interpreting engineering drawings, GD&T (Geometric Dimensioning and Tolerancing), and technical specifications., • Familiarity with writing Non-Conformance Reports (NCRs) and completing inspection documentation packages., • Experience performing routine CMM maintenance checks and machine accuracy verification., • Experience working cross-functionally with Engineering, Sales, or Customer Service in a quality control role., • You may be a great fit if you've held any of these titles: CMM Operator, CMM Programmer, Quality Control Inspector, Dimensional Inspector, Metrology Technician, Quality Assurance Inspector, CMM Technician, QC Inspector, Coordinate Measuring Machine Operator, Inspection Technician. Pre-Employment Requirements • Drug screen required., • Background check required., • E-Verify / work authorization required., • Ability to communicate effectively in English. Benefits • Weekly pay., • Direct deposit / Paycard., • Health and dental benefits available., • Earn referral bonuses. After you apply, please check your email for a short screening questionnaire from us. Candidates who complete it promptly will be reviewed faster. See all our current openings at jobs.connectstaffing.com #CONRP