Trabajos travel required en Lubbock, TexasCrear alertas

Job Description: If your passion is flying and you want to work in an environment where every second counts, contact us today! Position: Aviation Maintenance Pilot Location: Regional Maintenance Facility, Albuquerque, NM Airframe: C90 and PC12 Schedule: TBD Annual Salary: Up to $100,000 DOE The Aircraft Maintenance Pilot (AMP) assigned to a Guardian Flight Regional Maintenance Facility is primarily responsible for performing maintenance check flights of company aircraft and other duties as per the duties and responsibilities listed below. The AMP will report directly to the regional Director of Aviation—Flight Operations (DAFO) for all duties assigned. The AMP will have a ‘dotted line’ relationship with the regional maintenance leadership for scheduling and tasking. Responsibilities: • Performs pre- and post-maintenance visual inspections, ground runs, and operational check flights (OCF) for aircraft undergoing scheduled and unscheduled maintenance at regional maintenance facilities and in the field for troubleshooting and/or to ensure aircraft systems are functioning in accordance with design specifications, • Performs aircraft reposition flights as required for aircraft maintenance and to support operational needs, • Ensures aircraft quality and operational readiness after undergoing maintenance to include interior and exterior cosmetic items, emergency equipment and basic medical supplies, company and regulatory requirements, interior and exterior cleanliness, and other return to service items as required, • Ensures compliance with updates and revisions of Electronic Flight Bags, Pilot Operating Handbooks, Aircraft Flight Manuals, Aircraft Weight and Balance records, and Pilot Guides for aircraft being returned to service after a scheduled periodic inspection event, • Maintains accurate company and regulatory documentation and record keeping for risk assessment, shifts, load manifests, etc., • Interacts and collaborates with the Maintenance, Operations, Dispatch, Quality Assurance, and Safety departments, • Maintains required certifications, ongoing ground and air training, with an emphasis on aircraft systems training, • Other duties as assigned Minimum Required Qualifications: • Commercial Airplane Multi Engine Land (C-AMEL) Required., • Ability to interpret, apply, and effectively communicate complex technical data and processes associated with aircraft systems, • Ability and willingness to participate in the after-hours and on-call support of aircraft operational needs which may include travel and working some evenings, weekends, and holidays, • Possess strong work ethic, customer service skills, and the ability to communicate effectively both in writing and verbally, • Ability to work in a team environment with an eagerness to contribute to the overall success of the Maintenance department and the Company, • Valid and unexpired driver’s license, • Current First or Second Class FAA Medical Certificate, • 1,200 Total Flight hours., • 100 hours as Pilot in Command of a Multi-Engine Airplane, • 500 Cross Country hours., • 100 Night hours., • 75 Instrument (50 actual) hours. Preferred Qualifications: • High School Diploma, GED, or equivalent, • FAA Mechanic's Certificate with Airframe and Powerplant Ratings, • 100 hours as PIC in King Air or PC-12 model aircraft, • Experience maintaining general aviation and/or turboprop powered aircraft Working Conditions: • Required to work in outside weather conditions, • Must be able to work night, day, and overnight shifts as assigned, • May need to deice the plane, assist with towing the aircraft and maneuvering in and out of the hangar, prep the plane for flight Physical Demands: _ Why Choose Guardian Flight? As a leading provider of air medical services, management and experience in the air medical industry, is one of ’s (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at _. GMR’s Core Behaviors—keep care at the center, raise your hand, seek to understand, find a way together and be accountable—unite our teams and set us apart in emergency medical services. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing _for individuals with a disability. More Information about this Job: Check out our careers site _ to learn more about our benefit options.

Join our dynamic team and become a critical guardian of technological infrastructure! As a Data Center Engineering Technician, you'll play a pivotal role in maintaining the heartbeat of mission-critical technology infrastructure, ensuring seamless operations that power global digital experiences. Your expertise will directly contribute to maintaining an extraordinary 99.999% uptime, keeping the digital world running smoothly and efficiently. Engineering Technicians are Amazon’s front line when it comes to hands-on electrical and mechanical equipment troubleshooting. They will maintain, operate, and troubleshoot, Data Center Operation’s Mission Critical Facilities, which includes stand-by diesel generators and related fuel systems, as well as three phase electrical systems such as: switch gear, UPSs, PDUs, wet cell batteries and associated systems, CRAC, centrifugal chillers, cooling towers/water chemical system, air handlers and associated systems, pumps, & motors. AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. NOTE: Amazon does not sponsor for immigration, including for H-1B, TN, and other non-immigrant visas, for this role. NOTE: Lump sum stipend will be provided to eligible candidates who relocate for this position. This opportunity is located within the greater Lubbock area in Floydada, TX. Key job responsibilities • Daily building rounds to monitor and record information from electrical, mechanical, and fire/life safety equipment to ensure 24/7 reliability and availability, • Monitor Building Management Systems (BMS) and Electrical Power Management System (EPMS), • Assist in troubleshooting of facility and rack-level events within internal Service Level Agreements (SLA), • Perform rack installs and rack decommissioning within internal SLA, • Perform PM, troubleshooting, root cause analysis, and repair of electrical and mechanical equipment, • Technical writing to support change management program, • Monitor daily work requests and manage to resolution, and execute projects from conception to completion, • On-site support of contractors, sub-contractors and vendors, ensuring that all work performed is in accordance with established practices, procedures & local legislation, • Work schedule changes depending on specific site needs. Shifts can be up to 12-hours and may rotate on a predefined schedule. Some locations have on-call rotations., • Role may support more than one location/site. Physical Requirements: • Willingness and demonstrated ability to work in the following physical conditions with reasonable accommodations:, • Regularly lift and/or move up to 39 pounds independently, • Participate in group lifts for 40+ pounds, • Maintain balance and perform construction tasks while on a ladder, • Regularly walk, use hands and fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, climb stairs, twist, bend, work above shoulders, grasp, carry, push and pull objects into position, • Work in an environment requiring provided ear protection This role supports data centers in various operational stages. The position may be assigned to a facility still under development, which could require travel to established locations for training until your designated site becomes fully operational. Essential Requirements: • Ability to travel to or commute between data center locations as needed, • Willingness to temporarily work at alternative sites during training periods or until assigned facility is operational, • Travel frequency will vary based on business needs and operational status of assigned facility Candidates must be able to travel (over 50 miles) or commute (less than 50 miles) to active data center sites as required by business needs. A day in the life This role acts as Amazon’s front line when it comes to hands-on electrical and mechanical equipment preventative maintenance (PM) and troubleshooting, reporting to a site’s Data Center Facility Manager (FM). They will maintain, operate, and troubleshoot mission-critical data center facility equipment including stand-by diesel generators and related fuel systems, 3 phase electrical systems such as switchgear, UPS units, PDUs, and wet cell batteries and associated systems. Mechanical equipment includes CRAHU units, centrifugal chillers, cooling towers, water systems, air handlers and associated systems, pumps, and motors. Additional support equipment is included in the scope of the role which includes fire/life safety equipment, building automation systems, and general facilities equipment. • 2+ years of electrical and mechanical facilities maintenance, or 2+ years of electrical facilities maintenance and 1+ years of mechanical facilities maintenance experience, • 2+ years of Microsoft Office products and applications experience, • Work flexible schedule including weekends, nights, and holidays, • 2+ years of data center engineering experience, • Experience reading and writing procedures, technical documents, and engineering drawings, • vocational/technical training or an associate degree or above, or 4+ years of military experience Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at _. USA, TX, Lubbock - 37.64 - 65.91 USD hourly

Job Description Duininck is a fourth-generation, 100-year family-led company built on strong relationships with customers, employees, subcontractors and vendors. We have a diverse portfolio of businesses managing projects at any scale. Join specialized infrastructure projects across Texas and Oklahoma. You'll produce hot mix asphalt for military runways, construct roads for the Department of Transportation, and handle high-stakes concrete work for aviation and defense facilities. These aren't just jobs; they're careers building America's critical infrastructure. This seasonal, full-time position comes with a strong benefits package including: • Competitive wage starting at $35/hour with overtime, higher rate based on experience, • Paid Time Off, • Per Diem (when applicable), • Strong Health Plans to choose from, • Dental & Vision Plans, Company Paid Life insurance & Short-Term Disability, • Position specific personal protective equipment provided, • 401K with company match, and more! The Heavy Equipment Mechanic | Field Technician position will diagnose and repair all heavy construction equipment in the field. To ensure success as a Heavy Equipment Mechanic, you should have proven experience working with heavy machinery, be physically fit, and be able to troubleshoot issues in the shop and on the job site. A Heavy Equipment Mechanic must demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service. This position is based out of a local shop but travels to various sites as needed for equipment diagnosis and repair. Essential Duties and Responsibilities: • Driving to the job site to operate and inspect all construction equipment and components to determine needed repairs., • Diagnosing faults and ability to read schematics., • Hydraulic troubleshooting and ability to read hydraulic schematics., • Discuss equipment problems with supervisor and/or others as needed., • Repair, replace, calibrate, adjust and/or rebuild components., • Test repaired equipment for proper operation., • Inspect, add and/or change fluids and lubricants; check and replace worn parts and perform other routine service and maintenance., • Complete all required welding and fabrication work, as needed., • Read equipment manuals, service bulletins and other resources; attend training sessions. Maintain and update knowledge of equipment to be serviced., • Reporting damaged or faulty equipment to management., • Assist with ordering parts, materials and supplies needed for repair and maintenance., • Record work performed, time and materials used for each job; maintain related work logs and records., • Operate a variety of hand and power tools, equipment, motor vehicles and heavy equipment and perform related duties as assigned by the Shop Manager., • Maintain orderliness, cleanliness and safety., • Perform the above duties following the procedures developed by management (TPR, B2W Maintain, etc) Job Knowledge, Skills and Abilities: • Previous mechanical experience on heavy equipment, including asphalt plant equipment., • Extensive knowledge of diesel engines and construction equipment., • Strong mechanical aptitude and trouble shooting skills., • Basic welding skills., • Class A Commercial Driver’s License is preferred., • Certification as a Heavy Equipment Mechanic is a plus., • Good communication skills. Bilingual is a plus., • Understand and adhere to all safety regulations., • Understand and adhere to the Personal Protection Equipment requirements., • An unwavering focus on safety., • OSHA, • Willingness to travel throughout Texas and Oklahoma. Work Environment/Physical Demands: • Able to remain in a standing position for extended periods of time., • Must be capable of lifting arms above shoulder level to install and remove components as well as bend or stoop repeatedly over time., • Must be capable of manipulating tools in areas of limited spaces., • Able to move heavy objects (50 lbs. or more) long distances., • Work safely without presenting a direct threat to self or others., • Walk, bend, kneel, lift, stretch and sit., • Regularly work extended | overtime hours, outdoors and in a variety of weather conditions at all project locations., • Travel and some Saturday work are required. Duininck is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national origin, sex, age, disability, genetics, marital status, sexual orientation, gender identity, protected veteran status or citizenship status. If you would like more information on your EEO rights under the law, click here.

Job Description An independent heavy equipment rental company supporting the energy and drilling sectors is seeking a Lead Heavy Equipment Mechanic to manage, maintain, and repair a fleet of 20 to 30 machines. This role involves both shop work and field service, with a strong focus on Caterpillar equipment and telehandlers. We prefer a local candidate working a regular schedule, but are open to establishing a rotation schedule with daily subsistence pay for the right candidate. On-site shop housing is available if needed. Responsibilities • Perform comprehensive mechanical diagnostics, preventative maintenance, and field/shop repairs on a fleet of 20–30 heavy machines, focusing on Caterpillar equipment and telehandlers., • Oversee fleet maintenance schedules and prioritize daily workflows to ensure high equipment reliability and minimal downtime for drilling and energy clients., • Travel periodically to job sites across the United States to troubleshoot, service, and repair equipment deployed in secondary operating areas., • Partner with the Operations Manager to maintain accurate service records, coordinate parts ordering, and enforce strict job-site safety practices. Qualifications • Strong technical background diagnosing and repairing Caterpillar heavy machinery and telehandlers, ideally within the energy or drilling industries., • High degree of self-motivation and organization, with a demonstrated ability to work independently in both shop and remote field environments., • Valid driver’s license with a clean driving record, along with basic safety training certifications (or willingness to obtain them upon hire)., • Flexibility to work substantial overtime and travel out of state as needed (welding experience is preferred, but not required).

Job Description Red River Commodities is a leading processor of sunflower seeds and specialty grains, specializing in high-quality, nutritious food products. We pride ourselves on our sustainable practices, innovation, and commitment to delivering superior products to our customers. Our team shares core values focused on quality, innovation, responsibility, and community. We work hard, play harder, embrace authenticity, and always support one another to achieve our goals. Location: 212 NE Loop, Lubbock, TX 79403 Position Summary Red River Commodities is seeking an experienced and driven Quality Assurance Manager to lead food safety and quality programs across our Wild Bird Food production facilities in Lubbock, TX and Fargo, ND. This role will be based in Lubbock and serve as the primary quality leader for both locations, ensuring compliance with regulatory requirements, customer expectations, and company quality standards. The Quality Assurance Manager will oversee quality systems, lead food safety initiatives, manage audits and certifications, develop quality personnel, and partner closely with Operations leadership to drive continuous improvement. The ideal candidate is a hands-on leader who thrives in a manufacturing environment and has a passion for food safety, quality management, and team development. Key Responsibilities Quality & Food Safety Leadership • Develop, implement, and maintain comprehensive quality assurance and food safety programs across both wildlife production facilities., • Lead HACCP, Preventive Controls, GMP, sanitation, and regulatory compliance programs., • Ensure adherence to all applicable FDA, FSMA, OSHA, and customer-specific requirements., • Maintain and continuously improve quality management systems and documentation., • Champion a culture focused on food safety, product quality, and continuous improvement. Multi-Site Oversight • Provide leadership and support for quality teams in both Lubbock, TX and Fargo, ND., • Establish consistent quality standards, procedures, and expectations across both facilities., • Travel regularly between locations to conduct audits, provide training, and support operational initiatives., • Collaborate with facility leadership to identify opportunities for quality and process improvements. Audit & Regulatory Management • Lead internal audits, mock recalls, regulatory inspections, customer audits, and third-party certification audits., • Serve as the primary contact for food safety and quality-related audits., • Ensure corrective and preventive actions are identified, implemented, and sustained., • Maintain readiness for regulatory inspections and customer visits. Quality Systems & Continuous Improvement • Monitor quality metrics and KPIs to identify trends and improvement opportunities., • Investigate customer complaints, product defects, and non-conformances., • Lead root cause investigations and corrective action programs., • Partner with Operations, Maintenance, Procurement, and Supply Chain teams to improve quality performance and product consistency. Team Leadership & Development • Lead, coach, and develop quality personnel across both facilities., • Conduct training related to food safety, GMPs, HACCP, quality standards, and regulatory requirements., • Provide mentorship and professional development opportunities for quality team members., • Foster accountability, engagement, and collaboration within the quality organization. Supplier & Customer Quality • Support supplier qualification and raw material quality programs., • Review supplier performance and incoming material quality trends., • Resolve customer quality concerns and communicate effectively with customers regarding corrective actions. Qualifications Education & Experience • Bachelor's degree in Food Science, Biology, Chemistry, Agriculture, Quality Management, or a related field preferred., • Minimum of 3 years of Quality Assurance experience in food manufacturing, agriculture, seed processing, or related industry., • Minimum of 2 years of leadership experience managing quality personnel., • Multi-site quality management experience preferred. Technical Knowledge • Strong understanding of:, • HACCP, • FSMA, • Preventive Controls (PCQI), • GMPs, • Root Cause Analysis, • Regulatory Audits, • Quality Management Systems, • Experience managing customer, third-party, and regulatory audits., • Strong analytical and problem-solving abilities., • Proficiency with Microsoft Office and quality management software. Certifications Preferred • PCQI Certification, • HACCP Certification, • SQF Practitioner Certification, • Certified Quality Auditor (CQA) or related certification Physical & Travel Requirements • Ability to work in a manufacturing and warehouse environment., • Ability to occasionally lift up to 25 pounds., • Ability to walk production floors, climb stairs, and conduct facility inspections., • Travel between Fargo, ND and Lubbock, TX facilities is required, approximately 20-30% of the time., • Occasional overnight travel for audits, training, and customer visits. Company Benefits: At Red River Commodities, we value our employees and are committed to providing a supportive and rewarding work environment. As a member of our team, you will enjoy a competitive salary, comprehensive health benefits, and opportunities for career growth and development. Below are some additional benefits that we offer. • On-demand pay available through Tapcheck, • Paid time off, • Paid Holidays, • 401k & company match, • Profit Sharing, • Employee Assistance Program Red River Commodities and its subsidiaries are an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This applies to all employment practices within our organization. Red River Commodities makes hiring decisions based solely on qualifications, merit, and business needs at the time. We are committed to maintaining a legal and compliant workplace. As part of our hiring process, Red River Commodities participates in the E-Verify program. PIf042edda619d-25405-41781575

Job Description TRP Construction Group, LLC with locations in Texas, North Carolina, Georgia, and Florida, is a rapidly growing striping company with career advancement opportunities. TRP is seeking Pavement Marking Field Associates to become part of our highway striping team, and to share our core values of increasing road safety of the traveling public and delivering the highest level of precision and excellence. TRP Construction Group, LLC will conduct Background Check, Motor Vehicle Record (MVR) and Controlled Substance testing prior to hire. At TRP, we see you. We hear you. We salute you. Your service has constructed qualities we value—leadership, discipline, accountability, teamwork, and resilience. We honor the strength and sacrifice of the families who’ve had your six every step of the way. Your experience isn’t just recognized here—it’s mission-critical. If you’re ready to take point on your next assignment in a team that respects your contributions, fall in and apply today. Your next mission starts here. Equal Opportunity Employer We are an Equal Opportunity Employer and do not discriminate against applicants or employees based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, genetic information, or any other legally protected status. Requirements Responsibilities: • Equipment and vehicle repair reports (filled out by crew members), • Responsible for making sure all work is done and completed in compliance with DOT and quality, • guidelines, • Make sure vehicles are in working order (spray systems and/or other truck mounted equipment) and, • properly loaded each and every day; make sure vehicles are kept clean and neat inside and out, • Make sure pre-trip and post-trip inspection forms are filled out properly, • Maximize production on job, • Be trained and able to operate and maintain at least 6 different pieces of equipment Experience (Preferred but not required): • Be able to operate the following Vehicles/Equipment: hand machines, forklift,, • hand grinder, 3M hand-tape machine, 3M adhesive applicator and hand-roller tamper cart., • Be able to Install Preformed Thermo/ Hot Tape Qualifications: • Maintain company standards for background checks (i.e. criminal record, driving record and controlled, • substance/drug testing), • Knowledge of local driving rules and regulations, • Carry out simple arithmetic functions, • Maintain proper safety equipment required for each job, • Knowledge and ability to adapt to the latest technology, • Ability to use smart phone and applications, • Ability to adjust to changing work schedule, • Follow all Safety Policies and Procedures Physical Requirements: • Regularly lift and/or move up to 50 pounds, • Occasionally lift and/or move more than 100 pounds, • Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic,, • and fumes and airborne particles, • Noise level of the work environment is usually moderate/loud Availability: 2 Shifts Monday – Friday Sunday- Thursdays Must be able to work some nights and weekends Must be able to work overtime Must be able to travel with company when necessary Benefits • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • 401k

Territory: Lubbock, TX - Psychiatry Target city for territory is Lubbock - will consider candidates who live within 40 miles of territory boundaries with access to a major airport. Territory boundaries include: Lubbock, Amarillo, Midland, Odessa, Abilene and Weatherford. SUMMARY: Are you a results-driven biopharmaceutical sales professional looking to be part of an organization that values being curious, adaptable and accountable? Lundbeck is a global biopharmaceutical company focusing exclusively on brain health. With more than 70 years of experience in neuroscience, we are committed to improving the lives of people with neurological and psychiatric diseases. Lundbeck employees are inspired and driven by our purpose to advance brain health and transform lives. Join us on our journey of growth! As a Psychiatry Account Manager, you lead the promotion of our psychiatry portfolio, executing sales and marketing strategies with comprehensive clinical knowledge to drive sales performance. Our Account Managers are adept at executing against the toughest commercialization challenges in today’s rapidly changing environment and must demonstrate strong capability in the following areas: ESSENTIAL FUNCTIONS: Business Planning & Account Leadership - Ability to use digital tools and apply data-based insights to create opportunities, develop strategy & tactics, allocate resources to enhance sales execution, monitor progress and adjust direction to maximize sales performance. Selling - Deliver messages in a clear and compelling way to customers, effectively probe customer needs to handle objections, and close every call with a commitment to action to drive changes in behavior. Customer Development - Build and maintain productive internal and external relationships based on customer needs and organizational goals, incorporating “total office” account management. Local Market & Therapeutic Area Expertise - Gather and validate key trends and dynamics in the market, map account linkages, and apply comprehensive therapeutic knowledge to uncover and prioritize unique opportunities. Reimbursement - Consistently demonstrate the ability to stay informed on reimbursement dynamics, anticipate and effectively address payer access issues (IDNs, Medicare, Medicaid, Commercial) using Lundbeck resources. Pharmaceutical Environment/Compliance - Ability to apply knowledge of pharmaceutical and regulatory environment, including accountability and adherence to Lundbeck policies and procedures and FDA regulations regarding the promotion of pharmaceutical and medical products. REQUIRED EDUCATION, EXPERIENCE and SKILLS: • Bachelor of Arts or Bachelor of Sciences degree from an accredited college or university., • 2+ years pharmaceutical, biopharmaceutical, biologics, medical device sales or related healthcare sales experience., • Must demonstrate the intellectual capacity to score highly on disease and product training exams, including being certified on product knowledge annually., • Self-starter, with a strong work ethic and outstanding communication skills., • Must be computer literate with proficiency in Microsoft Office software., • Must live within 40 miles of territory boundaries., • Driving is an essential duty of this job; must have a valid driver’s license in good standing., • Meeting and complying with reasonable industry-standard credentialing requirements of healthcare providers / customer facilities is required for continued employment with Lundbeck. PREFERRED EDUCATION, EXPERIENCE AND SKILLS: • Previous experience within a specialty product sales force., • Prior experience promoting and detailing products specific to CNS/neuroscience including: depression, schizophrenia and bipolar disorder., • Documented successful sales performance., • Ownership and accountability for the development and execution of fully integrated account plans., • Strong analytical background, and experience using sales data reporting tools to identify trends, • Experience in product launches., • Previous experience working with alliance partners (i.e., co-promotions)., • Strong leadership through participation in committees, job rotations, panels and related activities. TRAVEL: • Willingness/Ability to travel up to 30% - 40% domestically to (a) regularly meet/interact with customer base and internal personnel within assigned territory; and (b) typically attend 4-8 internal/external conferences and meetings spanning locations within the United States. Travel must be able to be completed in a timely manner. The range displayed is a national range, and if selected for this role, may vary based on various factors such as the candidate’s geographical location, qualifications, skills, competencies, and proficiency for the role. Salary Pay Range: $120,000 - $140,000 and eligibility for a sales incentive target of $40,500. Benefits for this position include flexible paid time off (PTO), health benefits to include Medical, Dental and Vision, company match 401k and company car. Additional benefits information can be found on our _. Applications accepted on an ongoing basis. Why Lundbeck Lundbeck offers a robust and comprehensive benefits package to help employees live well and protect their health, family, and everyday life. Information regarding our benefit offering can be found on the _. Lundbeck is committed to working with and providing reasonable accommodations to disabled veterans and other individuals with disabilities during our employment application process. If, because of a disability, you need a reasonable accommodation for any part of the application process, please visit the _. Lundbeck is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, and any other characteristic protected by law, rule, or regulation. Lundbeck participates in _.

\n AHS Staffing is seeking a travel CT Technologist for a travel job in Lubbock, Texas. Job Description & Requirements\n \n • Specialty: CT Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: ASAP\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, nights\n, • Employment Type: Travel\n \n Radiologic Technologist - CT Tech - Travel | Lubbock, Texas Estimated Weekly Pay: $2559.40 Start Date: 10/05/2026 | Duration: 13 Weeks Shift: 3 x 12hr Nights Job Details \n AHS Staffing is seeking a qualified Travel - Radiologic Technologist - CT Tech in Lubbock, Texas. \n We provide competitive compensation, flexible housing options, and dedicated recruiter support throughout your assignment—so you can focus on delivering excellent patient care. Estimated Weekly Pay: $2559.40 \n \n • Weekly Wages: $1292.40\n, • Weekly M&I Per Diem: $476.00\n, • Housing Per Diem: $791.00\n \n Minimum Requirements \n \n • Graduate of an accredited program\n, • Active and unrestricted professional license(s) and required certifications\n, • Minimum of 2 years of relevant experience preferred\n, • Strong communication skills and a commitment to clinical excellence\n \n Benefits for Our Travelers \n \n • Competitive Compensation Packages Tailored to your Goals\n, • Medical, Dental, Vision and Pet Insurance Options\n, • 401(k) Savings Program with Company Match\n, • Licensure and Credentialing Reimbursement\n, • Professional Liability / Malpractice Coverage\n, • Weekly Pay/Direct Deposit\n, • Private Housing or Generous Housing Allowance\n, • Referral Bonuses up to $1000\n \n Apply today, and one of our recruiters will connect with you promptly. Join a team that prioritizes your career, your goals, and your well-being. \n *Weekly estimated pay is for informational purposes only and based on weekly hours. They include projected hourly wages and weekly housing, meals and incidental per diems for eligible clinicians. Contact our amazing team of recruiters for more details. \n \n AHS Staffing Job ID #816420. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: CT Tech About AHS Staffing\n \n At AHS Staffing, we are committed to providing a personalized, transparent, and rewarding experience. We go beyond the transactional nature of the industry by offering individualized job matching, clear communication, no-nonsense pay rates, and dedicated recruiter support 24/7. \n \n When you're on assignment with us, you'll get access to industry-leading benefits, including comprehensive medical coverage, 401(k) matching, competitive pay packages, licensure reimbursement, weekly pay, and more. Easily manage your day-to-day with our mobile app where you can view your assignment details, manage your compliance and licensing documents, submit timecards, and browse new jobs to land your next adventure. \n \n As a nationally recognized and award-winning agency, we understand the importance of providing a seamless experience from application to placement. Our top priority is matching you with assignments that align with both your personal and professional goals. Join us to experience working with an agency that truly prioritizes your success and well-being and see why thousands of healthcare professionals continue to trust us with their careers. \n \n \n

\n Jackson Therapy Partners is seeking a travel Long Term Acute Care Physical Therapist for a travel job in Lubbock, Texas. Job Description & Requirements\n \n • Specialty: Physical Therapist\n, • Discipline: Therapy\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Travel\n \n \n Looking for a change of scenery and a chance to help others? Join Jackson Therapy Partners as a traveling Physical Therapist where you’ll help patients recover from injuries and manage chronic conditions while experiencing life in a new location. \n \n Minimum Requirements \n \n • Bachelor's, Master's or Doctoral Degree in Physical Therapy from accredited schools approved by the APTA\n, • Active State License is Required to Start the Assignment\n, • BLS Certification May Be Required from AHA or ARC\n \n \n Assignment Details \n \n • Schedule: M-F\n, • Setting: Inpatient\n \n \n Apply now and we’ll connect you with a recruiter who'll reach out with more details. \n \n Benefits Designed for Travelers \n We deeply value your commitment to impacting others, that’s why we offer a comprehensive and competitive benefits package starting your first day. \n \n \n • Weekly, On-Time Pay because that's how it should be\n, • Full Medical Benefits & 401k Matching Plan\n, • 24/7 Recruiter: Your main point of contact available by text, phone or email\n, • Competitive Referral Bonuses\n, • 100% Paid Housing Available\n, • Travel & License Reimbursement\n \n \n Impacting Patient Care Nationwide \n Join Jackson Therapy Partners as a travel PT and get the flexibility, stability, and growth you deserve. Enjoy full-time pay, benefits, and relocation assistance in travel contracts that let you explore your favorite locations while maintaining job security in diverse settings nationwide. Choose from a variety of career options including direct hire, temp-to-hire, and travel contracts using ProVenture, our AI-enhanced career app designed for therapy professionals like you. \n \n Location Highlights \n Lubbock offers a mix of urban convenience and West Texas access. The city is home to the Buddy Holly Center and the Depot District, and Texas Tech University sits near central Lubbock with museums, athletics, and performing arts venues. Mackenzie Park includes Prairie Dog Town and the Joyland area, and Buffalo Springs Lake is about 15 miles from downtown for boating, fishing, and waterfront recreation. Caprock Canyons State Park is roughly 100 miles northeast, and Lubbock Preston Smith International Airport provides regional air access for travel across Texas and beyond. \n \n EEO Statement \n Jackson Healthcare and its family of companies are an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability or protected veteran status. We celebrate diversity and are committed to creating an inclusive environment for all of our associates. \n \n Jackson Therapy Partners Job ID #443124. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Jackson Therapy Partners\n \n Delivering a lifetime of opportunities in both contract and permanent positions, Jackson Therapy Partners™ connects highly skilled therapy and education professionals with rewarding careers at more than 1,300 rehab facilities, schools, outpatient clinics, hospitals, and skilled nursing facilities every year. Our award-winning team is 100% committed to you and to the development and success of your healthcare career. We take pride in being a value-driven company with a social conscious, and we're invested in your future. With Jackson, you'll get the jobs you want most from a company that values patient care as much as you do. Jackson Therapy Partners is part of the Jackson Healthcare® family of companies. \n \n

\n Talent4Health is seeking a travel Radiology Technician for a travel job in Lubbock, Texas. Job Description & Requirements\n \n • Specialty: Radiology Technician\n, • Discipline: Allied Health Professional\n, • Start Date: 11/30/2026\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Travel\n \n Title: X-Ray Tech\n \n Location: Lubbock, TX 79410\n \n Duration: 13 weeks\n \n Shift:Days | 5x8 hours | 08:00 AM – 04:00 PM\n \n \n No call • No weekends • No block schedule\n Requirements:\n \n • Minimum 1 year X-Ray Tech experience\n, • ARRT (R), BLS, TX License\n, • Epic experience required\n, • Must independently perform routine and complex X-ray exams\n, • Experience assisting with fluoroscopy procedures\n, • Level II Trauma experience preferred\n, • Fast-paced acute care experience required\n, • Must be able to float between units\n Description:\n \n, • Perform routine and complex X-ray examinations for adult and geriatric patients in a fast-paced Level II Trauma Center.\n, • Perform portable/bedside imaging, including portable chest and abdomen, as well as imaging in the ED and ICU.\n, • Perform X-rays across chest, abdomen, upper/lower extremities, spine, pelvis, head, and trauma cases.\n, • Assist with fluoroscopy studies, including Upper GI, Barium Swallow, Enema Studies, Arthrography, and Myelography.\n, • Utilize Epic, PACS, and GE equipment while maintaining radiation safety, infection prevention, and isolation precautions.\n, • May image up to 30 patients per day and must demonstrate strong patient care and communication skills.\n \n \n #3532829 P About Talent4Health\n \n A leader and innovator, offering comprehensive talent solutions for the healthcare industry across the nation. Talent4Health, based in Wilmington, DE is a one stop solution that offers access to an inclusive network of excellent healthcare professionals through its state-of-the-art recruitment strategies and extensive career opportunities. We have successfully placed over 3000 plus clinicians with the topmost healthcare facilities across 50 states in the US. \n With countless prestigious clients under our umbrella, backed up by passionate and hard-working recruiters, we are a team you have been looking for! \n Why Choose us? \n When it comes to choosing a recruitment agency, it’s imperative to consider what all they have to offer. \n \n • Proficiency: Our seasoned team of professionals has years of experience and we are dedicated to provide the highest quality service to our clients and candidates.\n, • Personalized service: We understand that every candidate is unique, and we work closely with each one to develop a customized plan that meets their specific needs.\n, • Consistency: We are devoted to offer dependable recruitment solutions for our candidates, and we are always a phone call away for all their questions or concerns.\n, • Comprehensive care: Our healthcare recruitment team works for different specialties, so there is a job for everyone.\n \n If this is all that excites you, do visit http://www.talent4health.com today! \n \n \n \n

\n Med Ninjas is seeking a travel Radiology Technologist for a travel job in Lubbock, Texas. Job Description & Requirements\n \n • Specialty: Radiology Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: ASAP\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 9 hours, days\n, • Employment Type: Travel\n \n Job Summary (List Format) for 1st Timer - TX LIC IN HAND X-Ray Tech: \n - Position: X-Ray Technologist, must have Texas license in hand \n - Facility: Short Term Acute Care Hospital, Level II Trauma Center, 379 staffed beds \n - Floating: May float between units \n - On-Call: Not required \n - Weekends: Not required \n - Block Schedules: Not required \n - Patient Volume: May image up to 30 patients per day \n - Patient Ratios: Not specifically measured in Diagnostic Radiology \n - Duties: \n - Independently perform routine and complex X-ray exams \n - Assist with fluoroscopy procedures \n - Environment: Fast-paced, acute care, trauma setting \n - Experience Required: Prior experience in similar environment required \n - Skills: \n - Strong patient care skills \n - Strong communication skills \n - Dress Code: \n - Licensed personnel (RN, LVN): Solid navy blue uniform or scrubs \n - No print tops, except in specified units \n - Parking: Free parking in any unrestricted employee/visitor surface lot \n - 48-Hour Shifts: Not approved \n Med Ninjas Job ID #20868. Pay package is based on 9 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Med Ninjas\n \n At Med Ninjas, we make travel healthcare simple, so you can focus on what matters: caring for patients. We match nurses and allied professionals with assignments that fit their lives, backed by a team that actually picks up the phone. \n We're a staffing agency built around one idea: healthcare professionals deserve a partner as invested in their success as they are in their patients'. \n On assignment with Med Ninjas, you get medical, 401(k), housing/travel support, plus a dedicated recruiter who knows your name and your goals. With a 5.0 rating from our travelers, we earn that trust one assignment at a time. \n Travel with confidence. Grow with Med Ninjas. \n Benefits\n \n • 401k retirement plan\n, • Medical benefits\n \n

\n GetMed Staffing, Inc. is seeking a travel CT Technologist for a travel job in Lubbock, Texas. Job Description & Requirements\n \n • Specialty: CT Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: 11/16/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n GetMed Staffing is searching for a strong CT Tech to assist our traveler-friendly client. A minimum of 1-2 years of experience is required. \n Traveling with GetMed Staffing offers the unique opportunity to gain diverse experiences, both personally and professionally. Gain experience that matters. \n GetMed Staffing, Inc. Job ID #38585590. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology:CT Tech,19:00:00-07:00:00 About GetMed Staffing, Inc.\n \n We are a diversity owned company, specializing in healthcare recruiting services. We truly understand how important a healthcare travelers' relationship is with their recruiter, as well as our relationship is with our healthcare facilities. We recognize that the needs of our healthcare travelers can vary, and therefore we provide the personalized touch necessary to ensure a successful travel assignment each and every time. Our healthcare facilities and clients benefit from us putting our healthcare travelers first. GetMed Staffing is excited to be a leader within the industry by focusing on providing healthcare travelers with more choices and possibilities as they plan for their next healthcare travel assignment. \n Benefits\n \n • Life insurance\n, • Medical benefits\n, • Dental benefits\n, • Vision benefits\n, • 401k retirement plan\n \n

Job DescriptionDescription: JOB SUMMARY: Technicians are responsible for performing vehicle repair and maintenance as assigned in accordance with dealer and factory standards with a focus on customer service excellence. ESSENTIAL FUNCTIONS: Primary Responsibility, Scope of Work, KPI Management, complexity: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Perform assigned work with excellence and high quality as efficiently as possible., • Receive work orders and perform assigned tasks as required., • Inventory and maintain issued and required company service tools in safe condition to perform jobs assigned., • Communicate with parts department to obtain necessary parts to complete work., • Inspect assigned vehicle thoroughly to determine condition of vehicle requires any if additional and/or safety items require attention; report any problems., • Accurately track the time spent on each job using the NetSuite application and record times in various segments of the work order., • Write clear and concise descriptions or “stories” of the repairs performed on various segments of work order using the three “3” C method., • Concern, • Cause, • Correction, • Accurately track all parts and material needed to perform repairs using the NetSuite application., • Road Service Calls – If qualified, travel to a customer’s location in a company service truck or with another authorized company driver to perform repairs at the customer’s location., • Inform Service Management of any delays or problems with the assigned tasks., • Maintain proper housekeeping of all work areas and tools., • Verify security of all supplies and parts., • Maintain all industry related and required Certifications., • Conform with all regulations, policies, work procedures and instructions., • Conform to all safety rules and use of appropriate safety equipment., • All other reasonable duties assigned within a Service Technician role. Management-related: This position has no supervisory responsibilities. Key Performance Indicators: • Technician Performance Efficiency (minimum 70%)., • OEM Certification Maintenance., • Comeback Percentage (Less than 2.0%)., • Adherence to Core Values., • Successful completion of assigned company training., • Compliance to company safety policies Leadership: Level 2 Technician has no management responsibilities. Competencies • Technical Capacity., • Problem Solving/Analysis., • Leadership., • Discretion. Supervisory Responsibilities: This position may include limited supervisory responsibilities. (Training and Development). Work Environment: While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of ambient weather conditions. The noise level in the work environment can be loud. Position Type/Expected Hours of Work This is a full-time position. Operations days and hours are Monday through Friday, 6 a.m. to 6 p.m. Shifts may vary. Occasional overtime and weekend work may be required. Travel Some travel may be required for this position. ADDITIONAL RESPONSIBILITIES: • Assist in New Bus Deliveries., • Assist in Facility Maintenance., • Perform Monthly Safety Inspection. Requirements: JOB SPECIFICATIONS: (Please describe what is required for satisfactory job performance in each category.) Education and Experience: • High school diploma., • Successful completion of A-Z Bus PDI Technician Certification Program., • Wheelchair Training (Inspection and Maintenance)., • Braun, • Ricon, • EPA 609 Certification., • A/C Training. At least one (1) of the following., • MCC/Carrier, • Valeo, • Trans-Air, • ACT Preferred Education and Experience: • Vocational College or Trade/Technical School Diploma/Certificate., • 3 + Years Professional Heavy Duty Automotive Mechanics Experience., • 2 + Years Electrical System Diagnosis and Repair Experience., • ASE School Bus Certification., • S1-Body Systems & special Equipment, • S2-Diesel Engine, • S3-Drive Train, • S4-Brakes, • S5-Suspension & Steering, • S6-Electrical/Electronic Systems, • S7-Air Conditioning Systems & Controls Note: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job.

Job DescriptionField Service Technician Are you a hands-on problem solver who loves to travel and provide exceptional customer service? IPS is seeking a dynamic Field Service Technician to join our team. In this role, no day will be the same. You will troubleshoot, repair, and maintain equipment while delivering top-notch service to our customers. You will be able to work alongside some of the best technicians in the industry, utilizing the latest technological tools and equipment. If you are enthusiastic about your work, have a strong work ethic, and enjoy working independently, IPS is the place for you. Apply now and start your adventure with us! Responsibilities and Expectations: The Opportunity:Are you a mechanical expert who thrives on finding the root cause of failure, and rebuilding equipment to run better than before, you will fit right in. We are looking for a talented Field Service Technician to lead on-site diagnostics, precision repairs, and overhauls of industrial rotating equipment. At IPS, our technicians are more than just "fixers “they are precision experts dedicated to providing an Unmatched Customer Experience. Primary Responsibilities: Mechanical Craft: • Precision Assembly & Alignment: Lead the installation and removal of AC/DC motors and coupled equipment. Perform laser alignments and set critical air gaps and mechanical seals to OEM specifications., • Detailed Mechanical Inspections: Utilize precision measuring tools (micrometers, calipers, and dial indicators) to diagnose wear, verify tolerances, and ensure equipment integrity., • Advanced Overhauls: Replace sleeve and anti-friction bearings, gearboxes and torque critical components using specialized tooling and specs., • Technical Testing: Perform essential diagnostic tests using a variety of portable electronic equipment (Megger®, PdMA MCE, Multimeter, and DLRO) to ensure system reliability., • Specialized Maintenance: Clean and prep electro-mechanical equipment utilizing bead blasting, ice blasting, and solvent cleaning to ensure a professional finish., • Safety & Collaboration: Adhere to strict safety standards while working independently or as part of a high-performing team to hit mutual project goals. Qualifications and Mechanical Competencies: • Experience: 2+ years of hands-on experience with AC/DC motors, gearboxes, pumps, or similar rotating industrial equipment., • Tool Proficiency: Proven ability to read and interpret precision measuring instruments and technical blueprints., • Analytical Mindset: Strong problem-solving skills with the ability to diagnose mechanical failures in a fast-paced, continuous improvement environment., • Communication: Strong customer-facing skills with the ability to communicate technical findings professionally., • The "Road Warrior" Spirit: Must have a valid Driver’s License and acceptable record; willing to work flexible hours, overtime, and weekends as needed for on-call field service., • Technical Extras (Preferred): Experience with PdMA testing or Level I Vibration Analysis is a significant plus. You’ll thrive at IPS if you. • Lead with integrity and prioritize safety. You demonstrate high standards and commit to a safe, ethical workplace., • Value teamwork and accountability. You work well with others, take responsibility, serve others, and deliver on your commitments., • Focus on the customer. You are dedicated to providing an unmatched customer experience and exceeding expectations., • Have an entrepreneurial spirit. You are proactive, innovative, and thrive in a fast-paced environment., • Communicate effectively and with purpose. You keep everyone informed with clear, concise communication., • Stay curious and love to learn. You continuously seek new knowledge and grow personally and professionally. Who We Are:At Integrated Power Services (IPS), we are committed to empowering you to make a meaningful impact. As the industry's leading and fastest-growing service provider, IPS offers single-source electromechanical and power management solutions to enhance the reliability of critical infrastructure across North America and the United Kingdom. We serve over 30,000 essential customer locations, from renewable energy pioneers to hospitals, manufacturers, and municipalities, helping them avoid costly downtime and ensure mission-critical operations. When you join IPS, you're joining a team that's revolutionizing equipment and process reliability across diverse sectors, from power generation to petrochemicals, and beyond. You will learn from industry experts, grow alongside a talented workforce, and be part of a company that is built on the Shared Values of Safety, Integrity, Teamwork, Accountability, Customer Focus, and Entrepreneurial Spirit. Benefits: • Paid Time Off., • 401k Employer Match., • On-the-job Training., • Tuition Reimbursement Program., • Medical, Dental, and Vision plans., • Safety shoe & glasses reimbursement., • And more. IPS is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status. Any offer of employment is contingent upon the successful completion of a background and driving record investigation. As a federal contractor, our company is committed to maintaining a safe and drug-free workplace. Candidates for this position are required to complete a pre-employed drug screen successfully. The drug screening process will include testing for substances that may impair one's ability to perform the job safely and effectively. #LI-RC1

THIS POSTION WILL BE FOR AMARILLO, TX About us Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. For more than 140 years, Johnson Controls has delivered performance where it really matters. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward. What you will do Johnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America. JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve. At Johnson Controls you’ll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. How will you do it We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Must be a member or willing to join the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada, AFL-CIO. Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing. Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors. Able to use vibration equipment to trouble shoot drivelines. Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair. You will be required to pass a knowledge examination to assess proficiencies. Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting. You will work with other local market mechanics as well as Servicemen and apprentices. Attention to detail through interpersonal, digital, and written skills. Able to write and communicate to the customer problem, cause, and corrective actions. Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program. Self-starter with a passion/ desire to learn and apply on the job. Prioritize safety in all forms Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license Pay Range: $30.25 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools,

Job Description Job Requirements: • 2-year Verifiable CDL-A OTR driving experience, • Clean MVR, • No more than 4 Violations in The Last 3Years, • No Speeding Violations over 15 MPH, • No DUI in the Last 5 Years, • Passport a plus! We travel to Canada border crossing bonus!, • Clean background for Canada runs -, • Must Meet FMCSA Requirements Job Description: CDL A Company Driver - Earn $90,000 to $110,000 Annually w/top earners grossing over $125k annually Out 10-11 Days / Home 3-4 - Flexible Home Time - Passport a Plus!! No Touch Freight - Hopper Bottom - Steady, Year-Round Miles Drive for the #1 Carrier in Carbon Black Transportation Driver Pay - Built for Top Earners • Earn $90,000 to $125,000+ annuallyw/ top earners grossing over $125k annually Starting pay: 60 CPM • $13/hour for all on-duty, not driving time, • Whenever you cross the border you get $120 (sometime 5x a week), • Paid loaded AND empty miles, • CPM increases every 6 months based on safety, complianceand productivity, • Weekly direct deposit, • Passport holders receive $120 additional for every order that crosses in and out of Canada. Home Time That Works for You • Out 10-11days, • Home 3-4 days, • Flexible scheduling options available Why Drivers Choose the Industry Leader • Hauling dedicated carbon black freight" steady, year-round demand No touch freight- primarily drop and hook • Established company with decades of stability and growth • Strong focus on safety, compliance, and driver success Top-Tier Benefits • Medical, Dental, and Life Insurance, • Multiple plan options, • Employee-only coverage starting around $65/week (non-tobacco), • 401(k) with company match and profit sharing, • EZ Pass, • Rider policy (18+) and pet program available Best Equipment on the Road • 2023-2026 Kenworth and International trucks, • APUs, refrigerators, and microwaves in every truck, • Outward-facing cameras only, • Late-model fleet designed to keep you running, not waiting Position Details • Hauling carbon black in hopper bottom trailers, • No-touch freight, • Hopper bottom experience preferred (not required), • Consistent 3,000+ miles weekly, • Reliable lanes with established customers VOLUME isn't just another trucking company " we are one of the leading carriers of carbon black in the United Statesand have been setting the standard in specialized bulk transportation for over 30 years. With a major presence in the carbon black market and continued growth, our drivers benefit from consistent freight, strong earnings, and long-term stabilityhauling for dedicated customers across the country. More than 80% of our drivers stay over 4 years " because at VOLUME, this isn't just a job, it's a career with one of the most established names in the industry. Join the #1 Carbon Black Carrier. Drive for a company that leads the industry, values its drivers, and delivers consistent freight week after week. Apply Now Call Leigh at 770-482-1400 ext 245 Or Melissa at 470-630-0204 Wage Range: 1800 - 2000 Weekly USD General Description of Benefits: Health, Dental and Vision as well as 401K, Profit sharing!

Job Description SUMMARY OF POSITION AND RESPONSIBILITY: Warehouse Workers at Allied Stone Inc. play a crucial role in the efficient operation of the warehouse by handling incoming and outgoing shipments of natural stone slabs and countertops. Their responsibilities include receiving, inspecting, and storing stone materials, and preparing orders for delivery or customer pickup. They utilize equipment such as forklifts and pallet jacks to move heavy slabs safely and ensure accurate inventory management. Additionally, they may assist with cutting, polishing, and finishing stone countertops and maintain the cleanliness and organization of the warehouse while adhering to strict safety protocols. Effective communication and teamwork are essential in this role to maintain a smooth workflow and meet customer demands. Essential Functions: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Receive incoming shipments of natural stone slabs, countertops, and related materials., • Inspect and verify the accuracy of received items against invoices or packing slips., • Safely unload and move heavy stone slabs using appropriate equipment such as forklifts, pallet jacks, or cranes, • Organize and store stone slabs in designated warehouse locations, ensuring proper handling to prevent damage., • Prepare outgoing shipments by picking, packing, and staging orders for delivery or customer pickup., • Assist with inventory management, including cycle counts, stock replenishment, and maintaining accurate records., • Operate machinery and equipment for cutting, polishing, or finishing stone countertops as needed., • Maintain cleanliness and organization of the warehouse, including sweeping, mopping, and removing debris., • Follow safety procedures and protocols to prevent accidents and injuries, including proper lifting techniques and use of personal protective equipment., • Collaborate with team members and communicate effectively to ensure smooth workflow and efficient operations. ESSENTIAL SKILLS, KNOWLEDGE, ABILITY AND MENTAL REQUIREMENTS: Knowledge: • Knowledge of warehouse operations and procedures, • Familiarity with natural stone materials, including types, sizes, and characteristics, • Understanding of inventory management principles and practices, • Knowledge of safety regulations and procedures related to warehouse operations and heavy lifting, • Basic understanding of machinery and equipment used in stone fabrication processes Skills: • Physical strength and stamina to safely lift and move heavy stone slabs, • Ability in operating warehouse equipment such as forklifts, pallet jacks, and cranes, • Attention to detail for inspecting and verifying incoming shipments and outgoing orders, • Organizational skills to efficiently store and retrieve stone slabs while maintaining proper inventory records, • Communication skills to collaborate with team members and effectively convey information Abilities: • Ability to follow instructions and safety protocols accurately., • Problem-solving skills to address issues related to inventory discrepancies or damaged materials., • Adaptability to work in a fast-paced environment and handle changing priorities., • Time management skills to prioritize tasks and meet deadlines., • Teamwork and cooperation contribute to a positive and efficient work environment. QUALIFICATIONS (EDUCATION, CERTIFICATIONS AND/OR TRAINING): Required Education: • High School Diploma or Equivalent. Preferred Education: • High School Diploma or Equivalent Required Experience: • Entry Level Position No Experience is Required Preferred Experience: • 1 year’s experience in logistical role in the warehouse. Work Environment: The work environment for a Warehouse Worker in the Natural Stone Countertop Industry is typically characterized by a large, indoor warehouse space with high ceilings and ample room for storage. The atmosphere can be dusty due to the presence of stone dust and debris, requiring workers to wear proper protective gear. Heavy machinery such as forklifts and cranes may be in operation, adding to the noise level. The environment may also be exposed to fluctuating temperatures, especially in regions with extreme weather conditions. Overall, teamwork is crucial in this environment, with workers often collaborating closely to ensure efficient operations and safe handling of heavy materials. Physical Demands: The role of a Warehouse Worker in the Natural Stone Countertop Industry entails significant physical demands, requiring the ability to lift and move heavy stone slabs weighing up to several hundred pounds. Workers must have strength, endurance, and proper lifting techniques to safely maneuver these materials using equipment such as forklifts and pallet jacks. Additionally, the job may involve prolonged periods of standing, bending, and walking in a potentially dusty and noisy warehouse environment. Travel Required: No Travel Required About Allied Stone: A trusted industry leader with over 20 years of experience, Allied Stone provides our clients with high-quality stone fabrication, delivered with exceptional customer service. Along the way we have fostered long-lasting partnerships with major suppliers to ensure that we can provide consistent quality at competitive prices. With a team of trendsetting designers, skilled craftsmen, and cutting-edge technology we create a seamless client experience that results in unrivaled finished spaces. Allied Stone Offers • Competitive salaries and comprehensive benefits, • On-going learning opportunities within a diverse, inclusive, and rewarding work environment, • Allied Stone is an Equal Employment Opportunity Employer Affirmative Action/EEO Statement: Allied Stone Inc. is committed to giving equal employment opportunities to all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law. We embrace diversity and encourage a work environment where differences are respected and valued. Other Duties: This job description should not be interpreted as an exhaustive list of responsibilities or as an employment agreement between the employer and employee. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification and are subject to change as the needs of the employer and requirements of the job change. Any essential functions of this position will be evaluated as necessary should an employee/applicant be unable to perform the functions or requirements due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the employee/applicant when possible

CrossMed Healthcare is seeking an experienced Intensive Care Unit Registered Nurse for an exciting Travel Nursing job in Lubbock, TX. Shift: Inquire Start Date: ASAP Duration: 13 weeks Pay: $1928.52 / Week Job Details • Gross Weekly Pay: $1835.28 - $1928.52, • Starts: 2026-11-02, • Assignment Length: 13 Weeks, • Shift: Overnight shift., • Hours Per Week: 36, • Job Quantity: 1, • Type: Travel, • City: Lubbock, • State: TX At CrossMed Healthcare Staffing, we aim to create lasting impressions wherever we go. Embark on your healthcare traveler journey with us and discover the CrossMed advantage. We offer competitive pay packages, comprehensive benefits, an in-house clinical team, and dedicated recruiters committed to your success. Our goal is to become the preferred staffing provider by delivering top-notch customer service. Join us and experience the difference firsthand! Benefits: • Competitive weekly pay, • Insurance (Health, Dental, Vision), • Life Insurance, • 401(k), • Referral Bonus, • Reimbursement for Licensure & CEU’s, • Refer-a-Friend Bonus Program, • EAP Program Qualifications: • At minimum 1 - 2 years’ experience preferred, • Graduate from an accredited school, • Certifications may be required based on facility requirements, • Physical abilities – remain in a stationary position, move and lift equipment (50-100 lbs), pushing, bending and pulling, • Communication and collaborates with physicians and other health team members, • Provides and coordinates patient care with other health team members, • Monitors patients’ responses to interventions and reports outcomes, • Administers medications as ordered with appropriate documentation, • Monitor and evaluates patients before, during, and post procedure depending on unit, • Shares on-call responsibilities with a 30-minute response time if required, • Maintains cleanliness of rooms and adequate stock of supplies, • Transports patients as needed, • Performs other duties as assigned Required Skills: • Interpersonal Skills – ability to work with diverse personnel (professional and support staff) while maintaining a positive demeanor and professional appearance., • Technical Skills - the ability to grasp, push/pull, and move while assisting with procedures or operating departmental equipment., • Cognitive Demands - capable of managing frequent interactions with the public and customers and meeting deadlines under pressure. Comfortable working under occasional close supervision or independently., • Sensory Skills - keen visual understanding and practical communication abilities. About CrossMed Healthcare: CrossMed Healthcare specializes in connecting Allied traveling health professionals with exceptional travel assignments across the country. Our team helps healthcare professionals explore various opportunities, whether in hospitals, clinics, or other healthcare facilities, while offering personalized support throughout the entire assignment process. With a commitment to quality and efficiency, we strive to make the journey of finding and securing travel assignments as seamless as possible for our valued healthcare professionals. Join the CrossMed team today and embark on a rewarding and adventurous career in healthcare! Enjoy benefits: -24/7 Support: from finding a contract, to sourcing housing, locating travel arrangements and everything in between we're there to help you! -Health, Dental, and Vision Insurance + 401K plans -Earn up to a $500 referral bonus for friends who complete their assignment! -Explore the country with a variety of contracts in various settings

What if your income had no ceiling, your weekends were always free, and you had a proven system backing you up from day one? At Platinum Supplemental Insurance, we’ve helped thousands of sales professionals build rewarding, high-earning careers—whether they came from sales, customer service, teaching, the military, or had no prior experience at all. Our established systems, AI-powered training, and dedicated back-office support mean you’re never figuring it out alone. You bring the work ethic; we bring everything else. No insurance experience required. We’ll train you, license you, and pay you while you learn. Why Platinum? Your Weekends, Every Weekend Work Monday through Thursday meeting with business owners and families in your territory, then enjoy a true three-day weekend—every single week. No evenings. No Saturdays. A work-life balance that actually works. Earn What You’re Worth—and Then Some Our first-year sales consultants typically earn $75,000 or more, with top performers exceeding $100,000. Your effort directly drives your income, and there is no ceiling on what you can earn. Here’s the full picture: • Strong First-Year Income: $75,000+ is typical; $100,000+ is achievable for motivated individuals., • Residual Renewal Income: Earn ongoing annual income from policies you’ve already sold—your book of business grows with you year after year., • Performance Bonuses: Generous bonuses reward your consistency and results., • Luxury Travel Incentives: Earn all-expenses-paid trips for you and a guest—quarterly getaways and annual destinations. This is a commission-based position—your income is directly tied to your performance, not someone else’s budget. Many of our top consultants say it’s the first time they’ve truly been paid what they’re worth. Paid Training & Real Support From Day One We don’t hand you a manual and wish you luck. Platinum invests in every new hire with a structured onboarding program designed to set you up to succeed: • Licensing Assistance: We provide online training to help you earn your insurance license before you ever go to the field., • One Week of Paid Training: Before your first day in the field, you’ll complete a full week of paid training—live webinars, sales training with experienced coaches, AI-powered virtual role-playing, and hands-on practice with our proven sales system., • Paid From Day One in the Field: Show up on your first Monday, get paid. Come back after your second week, get paid again. We put money in your pocket while you’re building your business., • AI-Powered Coaching: Get personalized feedback, interactive coaching, and real-time support that helps you master our 10-step sales process faster and more confidently than traditional training., • Ongoing Back-Office Support: Marketing, lead generation, customer service, and operations are handled for you so you can focus on building relationships and closing deals. Your Day-to-Day Meet with Business Owners & Families: Travel within your territory Monday–Thursday to connect face-to-face with people who need supplemental insurance protection. You’ll educate them on how Platinum’s products bridge the gaps in traditional health coverage. Follow a Proven Sales Process: Use Platinum’s 10-step system—backed by AI coaching—to identify prospects, deliver compelling presentations, and close with confidence. Grow Within a Supportive Team: Collaborate with a team that shares best practices, celebrates wins, and pushes everyone to get better. You’ll have mentors and peers invested in your success. What You’ll Enjoy Uncapped Income: Your earnings grow with your effort—no salary ceiling, ever. Residual Income That Builds Over Time: Annual renewal commissions create a growing income stream from your existing book of business. Every Weekend Off: A Monday–Thursday schedule means three-day weekends, every week. Paid Training & Licensing Support: We invest in your professional development from day one. Career Advancement: Move into leadership roles as you grow—Platinum promotes from within. All-Expenses-Paid Trips: Quarterly getaways and annual vacations for top performers—bring a significant other, on us. Who Succeeds at Platinum People Who Want to Control Their Income: You’re motivated by results and want your paycheck to reflect your effort, not a corporate pay scale. Strong Communicators: You connect easily with people from all walks of life and can explain things in a clear, relatable way. Coachable Self-Starters: You’re excited to follow a proven system, learn from AI-powered training and experienced mentors, and improve every week. Comfortable with Travel: You’re 18+ and ready for overnight travel Monday–Thursday within your assigned territory. What Happens After You Apply We don’t believe in leaving you in the dark. Here’s exactly what to expect: 1. Apply & Chat: Submit your application right here and have a quick conversation with our hiring assistant. It takes just a few minutes., 2. Schedule Your Interview: If you qualify, you’ll be able to schedule your first interview right away—most candidates have an interview on the books within 48 hours., 3. Meet Our Team: Talk to a real recruiter who’ll answer your questions, share what the role looks like day-to-day, and see if it’s a mutual fit., 4. Get Hired & Start Training: If we’re both excited, you’ll begin your licensing and paid training program—designed to get you earning as quickly as possible. Ready to Build Something That Lasts? If you want uncapped income, a four-day workweek, paid training, and the backing of a company that’s invested in your success, we’d love to talk. Apply today and find out how Platinum can help you build a career you’re proud of. About Platinum Platinum Supplemental Insurance helps individuals, families, and businesses protect their financial futures by bridging the gaps left by traditional health plans. When unexpected health issues arise, our products provide peace of mind and real financial protection. With a people-first culture, industry-leading AI training, and a commitment to the growth of every team member, Platinum is where driven professionals build lasting, lucrative careers—no matter where they’re starting from. Join Platinum and see why thousands of sales professionals have built careers they love.

What if your income had no ceiling, your weekends were always free, and you had a proven system backing you up from day one? At Platinum Supplemental Insurance, we’ve helped thousands of sales professionals build rewarding, high-earning careers—whether they came from sales, customer service, teaching, the military, or had no prior experience at all. Our established systems, AI-powered training, and dedicated back-office support mean you’re never figuring it out alone. You bring the work ethic; we bring everything else. No insurance experience required. We’ll train you, license you, and pay you while you learn. Why Platinum? Your Weekends, Every Weekend Work Monday through Thursday meeting with business owners and families in your territory, then enjoy a true three-day weekend—every single week. No evenings. No Saturdays. A work-life balance that actually works. Earn What You’re Worth—and Then Some Our first-year sales consultants typically earn $75,000 or more, with top performers exceeding $100,000. Your effort directly drives your income, and there is no ceiling on what you can earn. Here’s the full picture: • Strong First-Year Income: $75,000+ is typical; $100,000+ is achievable for motivated individuals., • Residual Renewal Income: Earn ongoing annual income from policies you’ve already sold—your book of business grows with you year after year., • Performance Bonuses: Generous bonuses reward your consistency and results., • Luxury Travel Incentives: Earn all-expenses-paid trips for you and a guest—quarterly getaways and annual destinations. This is a commission-based position—your income is directly tied to your performance, not someone else’s budget. Many of our top consultants say it’s the first time they’ve truly been paid what they’re worth. Paid Training & Real Support From Day One We don’t hand you a manual and wish you luck. Platinum invests in every new hire with a structured onboarding program designed to set you up to succeed: • Licensing Assistance: We provide online training to help you earn your insurance license before you ever go to the field., • One Week of Paid Training: Before your first day in the field, you’ll complete a full week of paid training—live webinars, sales training with experienced coaches, AI-powered virtual role-playing, and hands-on practice with our proven sales system., • Paid From Day One in the Field: Show up on your first Monday, get paid. Come back after your second week, get paid again. We put money in your pocket while you’re building your business., • AI-Powered Coaching: Get personalized feedback, interactive coaching, and real-time support that helps you master our 10-step sales process faster and more confidently than traditional training., • Ongoing Back-Office Support: Marketing, lead generation, customer service, and operations are handled for you so you can focus on building relationships and closing deals. Your Day-to-Day Meet with Business Owners & Families: Travel within your territory Monday–Thursday to connect face-to-face with people who need supplemental insurance protection. You’ll educate them on how Platinum’s products bridge the gaps in traditional health coverage. Follow a Proven Sales Process: Use Platinum’s 10-step system—backed by AI coaching—to identify prospects, deliver compelling presentations, and close with confidence. Grow Within a Supportive Team: Collaborate with a team that shares best practices, celebrates wins, and pushes everyone to get better. You’ll have mentors and peers invested in your success. What You’ll Enjoy Uncapped Income: Your earnings grow with your effort—no salary ceiling, ever. Residual Income That Builds Over Time: Annual renewal commissions create a growing income stream from your existing book of business. Every Weekend Off: A Monday–Thursday schedule means three-day weekends, every week. Paid Training & Licensing Support: We invest in your professional development from day one. Career Advancement: Move into leadership roles as you grow—Platinum promotes from within. All-Expenses-Paid Trips: Quarterly getaways and annual vacations for top performers—bring a significant other, on us. Who Succeeds at Platinum People Who Want to Control Their Income: You’re motivated by results and want your paycheck to reflect your effort, not a corporate pay scale. Strong Communicators: You connect easily with people from all walks of life and can explain things in a clear, relatable way. Coachable Self-Starters: You’re excited to follow a proven system, learn from AI-powered training and experienced mentors, and improve every week. Comfortable with Travel: You’re 18+ and ready for overnight travel Monday–Thursday within your assigned territory. What Happens After You Apply We don’t believe in leaving you in the dark. Here’s exactly what to expect: 1. Apply & Chat: Submit your application right here and have a quick conversation with our hiring assistant. It takes just a few minutes., 2. Schedule Your Interview: If you qualify, you’ll be able to schedule your first interview right away—most candidates have an interview on the books within 48 hours., 3. Meet Our Team: Talk to a real recruiter who’ll answer your questions, share what the role looks like day-to-day, and see if it’s a mutual fit., 4. Get Hired & Start Training: If we’re both excited, you’ll begin your licensing and paid training program—designed to get you earning as quickly as possible. Ready to Build Something That Lasts? If you want uncapped income, a four-day workweek, paid training, and the backing of a company that’s invested in your success, we’d love to talk. Apply today and find out how Platinum can help you build a career you’re proud of. About Platinum Platinum Supplemental Insurance helps individuals, families, and businesses protect their financial futures by bridging the gaps left by traditional health plans. When unexpected health issues arise, our products provide peace of mind and real financial protection. With a people-first culture, industry-leading AI training, and a commitment to the growth of every team member, Platinum is where driven professionals build lasting, lucrative careers—no matter where they’re starting from. Join Platinum and see why thousands of sales professionals have built careers they love.

What if your income had no ceiling, your weekends were always free, and you had a proven system backing you up from day one? At Platinum Supplemental Insurance, we’ve helped thousands of sales professionals build rewarding, high-earning careers—whether they came from sales, customer service, teaching, the military, or had no prior experience at all. Our established systems, AI-powered training, and dedicated back-office support mean you’re never figuring it out alone. You bring the work ethic; we bring everything else. No insurance experience required. We’ll train you, license you, and pay you while you learn. Why Platinum? Your Weekends, Every Weekend Work Monday through Thursday meeting with business owners and families in your territory, then enjoy a true three-day weekend—every single week. No evenings. No Saturdays. A work-life balance that actually works. Earn What You’re Worth—and Then Some Our first-year sales consultants typically earn $75,000 or more, with top performers exceeding $100,000. Your effort directly drives your income, and there is no ceiling on what you can earn. Here’s the full picture: • Strong First-Year Income: $75,000+ is typical; $100,000+ is achievable for motivated individuals., • Residual Renewal Income: Earn ongoing annual income from policies you’ve already sold—your book of business grows with you year after year., • Performance Bonuses: Generous bonuses reward your consistency and results., • Luxury Travel Incentives: Earn all-expenses-paid trips for you and a guest—quarterly getaways and annual destinations. This is a commission-based position—your income is directly tied to your performance, not someone else’s budget. Many of our top consultants say it’s the first time they’ve truly been paid what they’re worth. Paid Training & Real Support From Day One We don’t hand you a manual and wish you luck. Platinum invests in every new hire with a structured onboarding program designed to set you up to succeed: • Licensing Assistance: We provide online training to help you earn your insurance license before you ever go to the field., • One Week of Paid Training: Before your first day in the field, you’ll complete a full week of paid training—live webinars, sales training with experienced coaches, AI-powered virtual role-playing, and hands-on practice with our proven sales system., • Paid From Day One in the Field: Show up on your first Monday, get paid. Come back after your second week, get paid again. We put money in your pocket while you’re building your business., • AI-Powered Coaching: Get personalized feedback, interactive coaching, and real-time support that helps you master our 10-step sales process faster and more confidently than traditional training., • Ongoing Back-Office Support: Marketing, lead generation, customer service, and operations are handled for you so you can focus on building relationships and closing deals. Your Day-to-Day Meet with Business Owners & Families: Travel within your territory Monday–Thursday to connect face-to-face with people who need supplemental insurance protection. You’ll educate them on how Platinum’s products bridge the gaps in traditional health coverage. Follow a Proven Sales Process: Use Platinum’s 10-step system—backed by AI coaching—to identify prospects, deliver compelling presentations, and close with confidence. Grow Within a Supportive Team: Collaborate with a team that shares best practices, celebrates wins, and pushes everyone to get better. You’ll have mentors and peers invested in your success. What You’ll Enjoy Uncapped Income: Your earnings grow with your effort—no salary ceiling, ever. Residual Income That Builds Over Time: Annual renewal commissions create a growing income stream from your existing book of business. Every Weekend Off: A Monday–Thursday schedule means three-day weekends, every week. Paid Training & Licensing Support: We invest in your professional development from day one. Career Advancement: Move into leadership roles as you grow—Platinum promotes from within. All-Expenses-Paid Trips: Quarterly getaways and annual vacations for top performers—bring a significant other, on us. Who Succeeds at Platinum People Who Want to Control Their Income: You’re motivated by results and want your paycheck to reflect your effort, not a corporate pay scale. Strong Communicators: You connect easily with people from all walks of life and can explain things in a clear, relatable way. Coachable Self-Starters: You’re excited to follow a proven system, learn from AI-powered training and experienced mentors, and improve every week. Comfortable with Travel: You’re 18+ and ready for overnight travel Monday–Thursday within your assigned territory. What Happens After You Apply We don’t believe in leaving you in the dark. Here’s exactly what to expect: 1. Apply & Chat: Submit your application right here and have a quick conversation with our hiring assistant. It takes just a few minutes., 2. Schedule Your Interview: If you qualify, you’ll be able to schedule your first interview right away—most candidates have an interview on the books within 48 hours., 3. Meet Our Team: Talk to a real recruiter who’ll answer your questions, share what the role looks like day-to-day, and see if it’s a mutual fit., 4. Get Hired & Start Training: If we’re both excited, you’ll begin your licensing and paid training program—designed to get you earning as quickly as possible. Ready to Build Something That Lasts? If you want uncapped income, a four-day workweek, paid training, and the backing of a company that’s invested in your success, we’d love to talk. Apply today and find out how Platinum can help you build a career you’re proud of. About Platinum Platinum Supplemental Insurance helps individuals, families, and businesses protect their financial futures by bridging the gaps left by traditional health plans. When unexpected health issues arise, our products provide peace of mind and real financial protection. With a people-first culture, industry-leading AI training, and a commitment to the growth of every team member, Platinum is where driven professionals build lasting, lucrative careers—no matter where they’re starting from. Join Platinum and see why thousands of sales professionals have built careers they love.

What if your income had no ceiling, your weekends were always free, and you had a proven system backing you up from day one? At Platinum Supplemental Insurance, we’ve helped thousands of sales professionals build rewarding, high-earning careers—whether they came from sales, customer service, teaching, the military, or had no prior experience at all. Our established systems, AI-powered training, and dedicated back-office support mean you’re never figuring it out alone. You bring the work ethic; we bring everything else. No insurance experience required. We’ll train you, license you, and pay you while you learn. Why Platinum? Your Weekends, Every Weekend Work Monday through Thursday meeting with business owners and families in your territory, then enjoy a true three-day weekend—every single week. No evenings. No Saturdays. A work-life balance that actually works. Earn What You’re Worth—and Then Some Our first-year sales consultants typically earn $75,000 or more, with top performers exceeding $100,000. Your effort directly drives your income, and there is no ceiling on what you can earn. Here’s the full picture: • Strong First-Year Income: $75,000+ is typical; $100,000+ is achievable for motivated individuals., • Residual Renewal Income: Earn ongoing annual income from policies you’ve already sold—your book of business grows with you year after year., • Performance Bonuses: Generous bonuses reward your consistency and results., • Luxury Travel Incentives: Earn all-expenses-paid trips for you and a guest—quarterly getaways and annual destinations. This is a commission-based position—your income is directly tied to your performance, not someone else’s budget. Many of our top consultants say it’s the first time they’ve truly been paid what they’re worth. Paid Training & Real Support From Day One We don’t hand you a manual and wish you luck. Platinum invests in every new hire with a structured onboarding program designed to set you up to succeed: • Licensing Assistance: We provide online training to help you earn your insurance license before you ever go to the field., • One Week of Paid Training: Before your first day in the field, you’ll complete a full week of paid training—live webinars, sales training with experienced coaches, AI-powered virtual role-playing, and hands-on practice with our proven sales system., • Paid From Day One in the Field: Show up on your first Monday, get paid. Come back after your second week, get paid again. We put money in your pocket while you’re building your business., • AI-Powered Coaching: Get personalized feedback, interactive coaching, and real-time support that helps you master our 10-step sales process faster and more confidently than traditional training., • Ongoing Back-Office Support: Marketing, lead generation, customer service, and operations are handled for you so you can focus on building relationships and closing deals. Your Day-to-Day Meet with Business Owners & Families: Travel within your territory Monday–Thursday to connect face-to-face with people who need supplemental insurance protection. You’ll educate them on how Platinum’s products bridge the gaps in traditional health coverage. Follow a Proven Sales Process: Use Platinum’s 10-step system—backed by AI coaching—to identify prospects, deliver compelling presentations, and close with confidence. Grow Within a Supportive Team: Collaborate with a team that shares best practices, celebrates wins, and pushes everyone to get better. You’ll have mentors and peers invested in your success. What You’ll Enjoy Uncapped Income: Your earnings grow with your effort—no salary ceiling, ever. Residual Income That Builds Over Time: Annual renewal commissions create a growing income stream from your existing book of business. Every Weekend Off: A Monday–Thursday schedule means three-day weekends, every week. Paid Training & Licensing Support: We invest in your professional development from day one. Career Advancement: Move into leadership roles as you grow—Platinum promotes from within. All-Expenses-Paid Trips: Quarterly getaways and annual vacations for top performers—bring a significant other, on us. Who Succeeds at Platinum People Who Want to Control Their Income: You’re motivated by results and want your paycheck to reflect your effort, not a corporate pay scale. Strong Communicators: You connect easily with people from all walks of life and can explain things in a clear, relatable way. Coachable Self-Starters: You’re excited to follow a proven system, learn from AI-powered training and experienced mentors, and improve every week. Comfortable with Travel: You’re 18+ and ready for overnight travel Monday–Thursday within your assigned territory. What Happens After You Apply We don’t believe in leaving you in the dark. Here’s exactly what to expect: 1. Apply & Chat: Submit your application right here and have a quick conversation with our hiring assistant. It takes just a few minutes., 2. Schedule Your Interview: If you qualify, you’ll be able to schedule your first interview right away—most candidates have an interview on the books within 48 hours., 3. Meet Our Team: Talk to a real recruiter who’ll answer your questions, share what the role looks like day-to-day, and see if it’s a mutual fit., 4. Get Hired & Start Training: If we’re both excited, you’ll begin your licensing and paid training program—designed to get you earning as quickly as possible. Ready to Build Something That Lasts? If you want uncapped income, a four-day workweek, paid training, and the backing of a company that’s invested in your success, we’d love to talk. Apply today and find out how Platinum can help you build a career you’re proud of. About Platinum Platinum Supplemental Insurance helps individuals, families, and businesses protect their financial futures by bridging the gaps left by traditional health plans. When unexpected health issues arise, our products provide peace of mind and real financial protection. With a people-first culture, industry-leading AI training, and a commitment to the growth of every team member, Platinum is where driven professionals build lasting, lucrative careers—no matter where they’re starting from. Join Platinum and see why thousands of sales professionals have built careers they love.

Job DescriptionDescription: The Field Operations Specialist will focus on coordinating and overseeing all franchise training programs and new shop openings. They will provide operational and management support to franchisees. RESPONSIBILITIES • Maintains a helpful dialogue with franchisees on questions pertaining to their shop operations, • Responds to franchisees' questions in a timely manner, • Provide franchisee technology support (in person and remotely), • Assist in training and testing Certified Trainers; assist in Shop Evaluations, • Assist in operational setup of shops, including: retail pricing, point of sale system, vendor selection, hiring, new employee training, and operational support after the shop opening., • Perform onsite operational business review, • Create and maintain a respectful, enjoyable environment for crew, • Use corporate training programs, individual development plans, and work assignments to develop crew knowledge and skills, • Provide timely, constructive coaching and feedback, • Coordinate and update POS and online menus, • Perform other duties as needed or assigned; willingly assist others without being asked Requirements: POSITION QUALIFICATIONS • High school diploma or GED equivalent, • 6+ Months Bahama Buck’s Shop leadership experience, • Must be self-directed, • Must have organizational skills, • Must possess excellent communication and negotiation skills, • Must have supervisory skills, • Must be proficient at deductive reasoning., • Must be licensed to operate an automobile without hours of operation restrictions, • Strong organizational skills, • Possess basic math skills (add, subtract, multiply, divide), • Places value on diversity and shows respect for others, • Ability to problem-solve and handle high-stress situations ESSENTIAL FUNCTIONS • Must have the ability to lift 50 pounds, • Must be able to work with individuals in high-stress situations and not escalate the problem, but find solutions., • May be called out at night, weekends, and holidays, • Must be able to stand and walk for long hours (8hrs+), • Available to travel overnight until the shop training is completed, • Will be required to supervise individuals helping to fulfill job responsibilities. Part-time, etc

Job Description Job Description Job Title: Instructor Reports To: Career Resources Manager Status: Non-Exempt/Full-Time or Non-Exempt/Part-time Department: Career Resources MISSION STATEMENT Goodwill is a local non-profit helping people overcome challenges, build skills, find jobs and grow careers. Summary: This job description is intended to provide a high-level of general requirements for this position. It is not a complete statement of duties, responsibilities, or requirements. Other duties not listed here may be assigned as necessary to ensure proper operations. Responsible for facilitating engaging, participant centered instruction in digital skills, workplace technology, career readiness and other CRC learning programs. The instructor prepares and delivers curriculum, adapts instruction to participant needs, documents participation and progress, and works collaboratively with the CRC team to connect learning to employment and career goals. Employees are expected to maintain timely and professional communication, complete assigned responsibilities within established timelines, follow applicable policies and procedures, respond appropriately to supervisory direction and coaching, and communicate promptly when barriers may prevent completion of assigned work. Essential Duties and Responsibilities: All job functions are to be performed following safety guidelines and regulations • Arrive prepared for scheduled instruction with required materials, technology and learning activities ready for participant use., • Facilitate digital skills courses and other approved curriculum in a structured group setting as assigned by management., • Use non instructional work time for curriculum preparation, participant support, documentation, program development and other assigned CRC responsibilities., • Create an interactive learning environment that incorporates demonstration, guided practice, participant application, feedback and reflection., • Work with the Career Resources Manager to identify participant course needs and conduct research to develop appropriate course content., • Display confidence and tact and maintain optimal learning environment for individuals with differing personalities, learning styles, modalities, and levels of expertise., • Manage and prioritize multiple projects., • Maintain records and prepare reports as directed by supervisor including, but not limited to: attendance, student progress, case notes, customer satisfaction, and software applications., • Provide excellent customer service to both external and internal customers., • Must have patience and work with enthusiasm., • Effectively market Digital Skills training services., • Teach individuals at all levels of experience from beginning to advanced digital skills., • Use and implement approved performance-based handouts, assessments, and materials., • Demonstrate professional conduct and good work habits., • Report participant recommendations to other team members and obtain feedback., • Establish professional relationships with participants and their supports to ensure continuous progress., • Maintain reliable and punctual attendance and follow established procedures for reporting absences, tardiness or schedule changes., • Demonstrate the Mission of Goodwill Industries of Northwest Texas on a daily basis: “Goodwill is a local non-profit helping people overcome challenges, find jobs & grow careers.”, • Demonstrate the Core Four in all interactions: “Be Honest, Be on Time, Work Hard and Be Respectful of Others”, • Attend job fairs and community events as needed., • Must keep up with current technology advancements, uses and changes with the intent of training others., • Complete all required GII training within six months of hire date., • Complete 12 hours of professional development each year., • Perform other related duties as assigned. Supervisory Responsibilities: None Education and/or Experience: • Bilingual (English & Spanish) preferred., • Prefer two years of college with demonstrated technical expertise with PCs and software., • Experience in classroom instruction or experience in training groups of people preferred., • Must have experience with Windows operating system and able to pass NorthStar Assessment. Must be highly proficient in Microsoft Office and able to pass NorthStar Assessments Qualifications: To perform this job successfully, an individual must be able to perform each duty satisfactorily. The requirements listed below are representative of the knowledge, skill and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must have exemplary personal communication skills., • Must have excellent time management skills., • Ability to prioritize and stay on task., • Must be able to professionally conduct formal class instruction (virtual and in-person) for both internal customers and external participants., • Must be able to provide guidance, assistance, and feedback to participants in a group or individual setting., • Ability to interpret and explain a variety of instructions furnished in written, oral, diagram, or schedule form., • Must have strong interpersonal, collaborative, and problem-solving skills., • Must be highly organized, self-motivated, and detail-oriented, • Ability to work independently, with others, and as part of a team., • Must have valid Texas driver’s license, proof of liability, and good driving record to obtain auto insurance coverage, • Ability to travel and drive inside the Goodwill territory and abide by all procedures pertaining to the use of a company vehicle. Work Environment: The requirements listed above are representative of the knowledge, skill and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. There are no unusual environment characteristics associated with performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Limited: General office environment infrequently exposed to extreme atmospheric conditions (temperature, noise, fumes, dust, etc.), • Exposed to moderate noise levels in a typical office environment, • Speaking on the telephone or computer (via Zoom, Teams, Etc.) with coworkers, participants, and referring counselors. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions While performing the duties of this position, the employee must be mobile and willing to drive to conduct training classes and other events as required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Light office work, such as typing, speaking on the phone, and using a computer to enter data., • Must be able to sit, stand and/or walk for extended periods of time., • Must be able to have repetitive wrist, hand and/or finger movement to type and work on computer., • Must have finger dexterity and hand-eye coordination to work on computer, telephone, and related office equipment., • Be able to occasionally lift up to 20 pounds, • Be able to travel as needed., • Regular attendance is a necessary and essential job function. Page Break Goodwill Industries of Northwest Texas provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

CrossMed Healthcare is seeking an experienced Intensive Care Unit Registered Nurse for an exciting Travel Nursing job in Lubbock, TX. Shift: Inquire Start Date: ASAP Duration: 13 weeks Pay: $1928.52 / Week Job Details • Gross Weekly Pay: $1835.28 - $1928.52, • Starts: 2026-11-02, • Assignment Length: 13 Weeks, • Shift: Overnight shift., • Hours Per Week: 36, • Job Quantity: 1, • Type: Travel, • City: Lubbock, • State: TX At CrossMed Healthcare Staffing, we aim to create lasting impressions wherever we go. Embark on your healthcare traveler journey with us and discover the CrossMed advantage. We offer competitive pay packages, comprehensive benefits, an in-house clinical team, and dedicated recruiters committed to your success. Our goal is to become the preferred staffing provider by delivering top-notch customer service. Join us and experience the difference firsthand! Benefits: • Competitive weekly pay, • Insurance (Health, Dental, Vision), • Life Insurance, • 401(k), • Referral Bonus, • Reimbursement for Licensure & CEU’s, • Refer-a-Friend Bonus Program, • EAP Program Qualifications: • At minimum 1 - 2 years’ experience preferred, • Graduate from an accredited school, • Certifications may be required based on facility requirements, • Physical abilities – remain in a stationary position, move and lift equipment (50-100 lbs), pushing, bending and pulling, • Communication and collaborates with physicians and other health team members, • Provides and coordinates patient care with other health team members, • Monitors patients’ responses to interventions and reports outcomes, • Administers medications as ordered with appropriate documentation, • Monitor and evaluates patients before, during, and post procedure depending on unit, • Shares on-call responsibilities with a 30-minute response time if required, • Maintains cleanliness of rooms and adequate stock of supplies, • Transports patients as needed, • Performs other duties as assigned Required Skills: • Interpersonal Skills – ability to work with diverse personnel (professional and support staff) while maintaining a positive demeanor and professional appearance., • Technical Skills - the ability to grasp, push/pull, and move while assisting with procedures or operating departmental equipment., • Cognitive Demands - capable of managing frequent interactions with the public and customers and meeting deadlines under pressure. Comfortable working under occasional close supervision or independently., • Sensory Skills - keen visual understanding and practical communication abilities. About CrossMed Healthcare: CrossMed Healthcare specializes in connecting Allied traveling health professionals with exceptional travel assignments across the country. Our team helps healthcare professionals explore various opportunities, whether in hospitals, clinics, or other healthcare facilities, while offering personalized support throughout the entire assignment process. With a commitment to quality and efficiency, we strive to make the journey of finding and securing travel assignments as seamless as possible for our valued healthcare professionals. Join the CrossMed team today and embark on a rewarding and adventurous career in healthcare! Enjoy benefits: -24/7 Support: from finding a contract, to sourcing housing, locating travel arrangements and everything in between we're there to help you! -Health, Dental, and Vision Insurance + 401K plans -Earn up to a $500 referral bonus for friends who complete their assignment! -Explore the country with a variety of contracts in various settings

Job Description JOURNEYMAN ELECTRICIAN We are looking to fill an Electrician opening throughout the Midwest As a Journeyman Electrician, you will be responsible for electrical installations, repairs, maintenance, and ensuring the safety and functionality of electrical systems. You’ll work with a team, providing guidance to apprentices, troubleshooting electrical systems, and adhering to safety and local code requirements. If you enjoy working hands-on, have excellent problem-solving skills, and have experience in the electrical field, this position provides an opportunity to grow and make a significant impact. KEY QUALIFICATIONS: • Maintain current Journeyman electrician’s license or identification card to meet governmental regulations, • Willing to travel, • 4+ years of electrical experience, • Possess the required personal tools, • Knowledge of local, state, and national electrical codes, • Skilled at oral and written communication, planning, and training, • Skilled problem solving and troubleshooting, • The physical requirements for this role include:, • Manual dexterity for use of hand and power tools, • Good vision (either normal or corrected) and good balance, • Repeated bending, stooping, reaching, working overhead, • Walking, climbing, standing, crouching, crawling, for periods of time, • Repeatedly lifting up to 50 pounds overhead, • Work from heights of up to 50 ft, including on ladders, lifts, elevated platforms, scaffolds, aerial lifts, catwalks, or other safe work areas, • Work as needed in tight spaces, including in manholes, utility tunnels, crawl spaces, and attics, • Pass pre-employment drug screen and background check\nCompany Description Are you looking for your next big opportunity? At Mears Group, a Quanta Services company, we offer more than just a job, we offer a long-term career where you can grow, innovate, and make a real impact. With more than 50 years of industry leadership, we are committed to safety, quality, and integrity as we build and maintain the infrastructure that powers our nation. Are you looking for your next big opportunity? At Mears Group, a Quanta Services company, we\r\noffer more than just a job, we offer a long-term career where you can grow, innovate, and make\r\na real impact. With more than 50 years of industry leadership, we are committed to safety,\r\nquality, and integrity as we build and maintain the infrastructure that powers our nation.

Job DescriptionJob Title: X-Ray Tech City: Lubbock State: TX Job Type: Travel Discipline: Allied Speciality: X-Ray Tech Facility Setting: Short Term Acute Care (STAC) Accepting Locals per Radius Rule?: Yes Contract Length: 13 weeks Shifts: Days Shift Details: Day 5x8-Hour (08:00 - 16:00) Weekly Schedule: 40 Hours Certifications/Licences: • BLSMandatory Experience:, • TX LIC IN HAND X-Ray Tech, • 1 Years exp, • Will position float between units: Yes, • Special requirements: Must be able to independently perform routine and complex X-ray exams and assist with fluoroscopy procedures. Experience working in a fast-paced acute care environment is required. The facility is a Level II Trauma Center. Strong patient care and communication skills are essential., • Type of Facility: Short Term Acute Care, • Level II Trauma CenterGet in Touch: We want to hear from you! If you think you’d be a good match, submit your resume and reach out to Piyush at (862) 799-2191 to learn more.

Job Description1YR/1ST TIMERS OK - Peds RN - Req 10999 Will position float between units: Yes Is on-call required? Yes based on unit census Are weekends required? Yes 5 shifts in 6 week period Are block schedules required? No What are expected ratios? 1:3-5 Special requirements: Pediatric experience preferred Are 48 hours approved: No Hospital Highlights Type of Facility: Children s Hospital / Level II Pediatric Trauma Center Total Staff Beds: 181 Scrub Color: All RN- Navy / RRTs: Galaxy Blue/Royal Blue Parking Cost: Free in any unrestricted space. Bike racks available Job Requirements & Qualifications • Previous Charge Experience:, • Years of Experience: 1 year(s) • Patient Ratio Experience:, • Charting System: Required, Epic • Teaching Hospital Experience: Preferred • Community Hospital Experience:, • LTAC Experience:, • Trauma Level I Experience:, • Trauma Level II Experience:, • Travel Experience Required: No • Certfications:Certs marked with * are preferred BLS, PALS • Skills:Skills marked with * are preferred Respiratory BiPAP/CPAP management Oxygen Delivery Systems Gastrointestinal Breastfeeding Support/Handling of Breast Milk Feedings (bottle, breast, gavage) IV therapy/Phlebotomy Central Line/Implanted Line Care Endocrine/Metabolic Hyperbilirubinemia Cardiovascular Interpretation of dysrhythmias Management of dysrhythmias Professional Topic and Skills Isolation Precautions/PPE Work Settings Pediatric MedSurg #TB_RN

Job Description Job description Riley Industrial Services, Inc. has immediate openings for experienced journeymen painters & coaters for our branch in Lubbock, TX. Painting I-beams, pipe, meter runs, vessels, tanks, etc. Experience spraying with both airless & conventional. We're NOT looking for commercial or house painters, but rather industrial painters! • 2+ years of industrial painting is required., • Applicants must have a valid driver's license. (No state IDs or interlock), • Must be able to pass a pre-employment drug & alcohol test., • Must be in good physical condition., • Must be willing to travel. Transportation & Per Diem is provided when overnight travel is required. Job Type: Full-time What We Offer • Competitive pay (based on experience), • Comprehensive and affordable medical, dental, vision, and life insurance, • 401(k) with employer contributionsA team that values safety, dependability, and a strong work ethic Pay: $18.00 - $22.00 per hour

CrossMed Healthcare is seeking an experienced Emergency Room Registered Nurse for an exciting Travel Nursing job in Lubbock, TX. Shift: Inquire Start Date: ASAP Duration: 13 weeks Pay: $1928.52 / Week Job Details • Gross Weekly Pay: $1835.28 - $1928.52, • Starts: 2026-11-02, • Assignment Length: 13 Weeks, • Shift: Day shift, • Hours Per Week: 36, • Job Quantity: 1, • Type: Travel, • City: Lubbock, • State: TX At CrossMed Healthcare Staffing, we aim to create lasting impressions wherever we go. Embark on your healthcare traveler journey with us and discover the CrossMed advantage. We offer competitive pay packages, comprehensive benefits, an in-house clinical team, and dedicated recruiters committed to your success. Our goal is to become the preferred staffing provider by delivering top-notch customer service. Join us and experience the difference firsthand! Benefits: • Competitive weekly pay, • Insurance (Health, Dental, Vision), • Life Insurance, • 401(k), • Referral Bonus, • Reimbursement for Licensure & CEU’s, • Refer-a-Friend Bonus Program, • EAP Program Qualifications: • At minimum 1 - 2 years’ experience preferred, • Graduate from an accredited school, • Certifications may be required based on facility requirements, • Physical abilities – remain in a stationary position, move and lift equipment (50-100 lbs), pushing, bending and pulling, • Communication and collaborates with physicians and other health team members, • Provides and coordinates patient care with other health team members, • Monitors patients’ responses to interventions and reports outcomes, • Administers medications as ordered with appropriate documentation, • Monitor and evaluates patients before, during, and post procedure depending on unit, • Shares on-call responsibilities with a 30-minute response time if required, • Maintains cleanliness of rooms and adequate stock of supplies, • Transports patients as needed, • Performs other duties as assigned Required Skills: • Interpersonal Skills – ability to work with diverse personnel (professional and support staff) while maintaining a positive demeanor and professional appearance., • Technical Skills - the ability to grasp, push/pull, and move while assisting with procedures or operating departmental equipment., • Cognitive Demands - capable of managing frequent interactions with the public and customers and meeting deadlines under pressure. Comfortable working under occasional close supervision or independently., • Sensory Skills - keen visual understanding and practical communication abilities. About CrossMed Healthcare: CrossMed Healthcare specializes in connecting Allied traveling health professionals with exceptional travel assignments across the country. Our team helps healthcare professionals explore various opportunities, whether in hospitals, clinics, or other healthcare facilities, while offering personalized support throughout the entire assignment process. With a commitment to quality and efficiency, we strive to make the journey of finding and securing travel assignments as seamless as possible for our valued healthcare professionals. Join the CrossMed team today and embark on a rewarding and adventurous career in healthcare! Enjoy benefits: -24/7 Support: from finding a contract, to sourcing housing, locating travel arrangements and everything in between we're there to help you! -Health, Dental, and Vision Insurance + 401K plans -Earn up to a $500 referral bonus for friends who complete their assignment! -Explore the country with a variety of contracts in various settings

InSync Consulting Services is seeking an experienced Intensive Care Unit Registered Nurse for an exciting Travel Nursing job in Lubbock, TX. Shift: 4x12 hr days Start Date: 11/16/2026 Duration: 13 weeks Pay: $2723 / Week Coast Medical Service is a nationwide travel nursing & allied healthcare staffing agency dedicated to providing an elite traveler experience for the experienced or first-time traveler. Coast is featured on Blue Pipes' 2023 Best Travel Agencies and named a 2022 Top Rated Healthcare Staffing Firm & 2023 First Half Top Rated Healthcare Staffing Firm by Great Recruiters. Please note that pay rate may differ for locally based candidates. Please apply here or contact a recruiter directly to learn more about this position & the facility, and/or explore others that may be of interest to you. We look forward to speaking with you! About InSync Consulting Services: InSync Consulting Services is a nationally recognized provider of clinical staffing and consulting solutions, dedicated to connecting highly skilled healthcare professionals with opportunities across the United States, including Alaska and Hawaii. As a full-service staffing firm, we offer travel, PRN, local and direct-hire placements tailored to meet the unique needs of our candidates. Our team’s extensive experience in specialized areas of healthcare staffing allows us to thoroughly understand the critical skills required for success in this dynamic industry. Accredited by The Joint Commission, we adhere to the highest standards of quality and compliance. We take great pride in facilitating a seamless, efficient hiring process that prioritizes excellence, professionalism, and satisfaction. Whether you are seeking your first assignment or next assignment, InSync Consulting Services is here to provide unmatched service and expertise. WE ARE PROUD TO BE: • InSync is Joint Commission Certified, • InSync is a nationally recognized SDVOSB - Service-Disabled Veteran-Owned Small Business, • InSync is a Certified DVBE - Disabled Veteran Business Enterprise., • InSync is a Certified California Small Business

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR OgfeEoTadF

Job Description Job Title: Traveling Commercial HVAC Service Technician Job Location: Global (traveling position) FLSA Status: Non-Exempt Pay Range: $30-60/hour DOE + travel stipends + premium benefits + potential sign-on bonus Ready to take your HVAC career nationwide? Join a powerhouse team building and servicing mission-critical data centers for the biggest names in tech — with top pay, travel stipends, premium benefits, and a potential sign-on bonus based on your experience. If you’ve got the expertise, we’ve got the opportunity. Overview: Based in Lubbock TX, you’ll join Air National Services — part of the AIR family of operating companies as an Experienced Commercial HVAC Service Technician. You’ll travel to high-profile data centers across the country, providing startup, commissioning, and service support for advanced HVAC systems that power today’s digital infrastructure. When you’re home, you’ll partner with one of our local operating companies to support regional commercial clients across that region. Join a company that values your expertise, precision, and pride in doing the job right. Check out our website here: AIR Control Concepts | HVAC Partnerships, Growth & Support Across North America Essential Duties and Responsibilities: Service Technicians must demonstrate startup, commissioning, and diagnostic troubleshooting experience. Core Responsibilities Include: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where needed. Additional Role Highlights: • Travel will be required nationwide. When not on the road, technicians will work with the local operating company in their region., • A tool set is provided by the company., • Uniforms and all required PPE are supplied by the Air National Services team, • Technicians receive a company-issued corporate credit card for job-related expenses., • Extensive on-the-job training is provided at no cost, with opportunities to expand skills and grow over time. Competencies: • Technical Expertise & Problem Solving – Applies in-depth knowledge of commercial HVAC systems, tools, and technologies to troubleshoot issues and implement effective solutions. Maintains strong attention to detail and follows through on complex service tasks., • Customer & Team Engagement – Builds trust and maintains positive relationships with customers through clear, professional communication and consistent service. Collaborates well with peers, dispatch, and management to support team goals., • Time & Task Management – Prioritizes responsibilities effectively, manages schedules, and maximizes productivity across varying service calls and work environments., • Adaptability & Continuous Learning – Responds well to changing job demands and field conditions. Actively participates in training and embraces new tools, technologies, and methods to stay current in the trade. Experience & Requirements: • 5+ years of commercial HVAC service experience with systems such as chillers, hydronic systems, VRF, RTUs, packaged equipment or mission-critical cooling systems preferred., • EPA Universal Certification required; OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record; able to pass a background check and drug screening., • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces. Physical Demands / Work Environment: • This role is primarily field-based and physically active. HVAC Service Technicians can expect to spend the majority of their time on their feet, walking, standing, climbing ladders, bending, crouching, or working in tight and confined spaces. Extended periods of physical activity are common while diagnosing and repairing equipment at customer job sites., • While a small portion of time (approximately 15%) may be spent in an office setting completing reports or administrative tasks at a computer, most responsibilities require hands-on work with tools and equipment. Technicians must regularly lift and move items up to 50 pounds and occasionally up to 100 pounds, sometimes in challenging environments., • Clear and effective communication with customers, coworkers, and supervisors is essential, both in person and electronically. Individuals must also be capable of reviewing their work for accuracy and making necessary adjustments in the field., • This position involves frequent exposure to outdoor conditions and varying environments, including mechanical rooms, rooftops, and active construction sites. Noise levels may range from low to high depending on the job location. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education. Equal Employment Opportunity Statement AIR Control Concepts is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law. Work Authorization and Visa Sponsorship Applicants must be legally authorized to work in the United States. At this time, AIR Control Concepts does not provide employment-based visa sponsorship for this position, either now or in the future. Powered by JazzHR EE4ugiD8Gy

Job Description Location: Nationwide Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on-the-job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking Field Walkout Engineers who will perform walkouts for an entire town and/or subdivision to create field notes for new or existing (as-built) cable plants following specifications provided by customer. Responsibilities • Perform new build walkout or as-built mapping., • Follow guidelines to provide detailed accurate route of existing or new build plant., • Ensure all tasks are completed in accordance with customer and industry specifications., • Obtain the correct field information, record verification, document all details for aerial and underground telecommunications including fiber, coax, poles, pedestals, and more. Skills we are looking for • 2+ years of cable mapping experience within the CATV industry is required., • Comprehensive knowledge of the fielding process with hands on experience in CATV asbuilt and new build walkouts., • Knowledge of cable design and basic OSP construction practices of cable systems., • Permitting experience in telecommunications such as: right of way (ROW), pole, railroad, and government agency permitting is preferred., • Able to read and interpret maps, drawings, and diagrams associated with CATV projects., • Ability to accurately update As-Built field prints with equipment & information obtained from the field walkout., • Good computer skills with proficiency in MS Excel, Word, Outlook, & PDF Editor with the ability to learn new software and technologies., • Ability to draw digitally in software programs like Bluebeam is preferred., • Must be highly responsible and self-motivated., • Strong analytical, observational, and communication skills., • Able to work independently within minimal supervision., • Able to communicate with customers in a professional manner. Additional Information • This is a full-time, production-based position., • Must be willing to travel 100% nationwide., • Perform field walkout assignments daily over varying terrain and in all weather conditions., • Must have a valid driver’s license and a good driving record., • Company vehicle and necessary tools will be provided., • Hotel expenses covered., • Full benefits package. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer. #LI-DNI

Job Description KALCON is seeking an experienced and field-oriented Scheduler / Planning & Delivery Manager to support the successful delivery of mission-critical data center construction projects. Acting as an extension of the Owner's Representative team, this role provides on-site schedule leadership, construction planning support, schedule validation, and delivery oversight throughout construction, commissioning, and turnover activities. The position may support projects where the client is acting as either the tenant within a third-party developed facility or as the developer delivering space for a tenant, requiring flexibility in how the role engages with project stakeholders and contractors. Minimum Qualifications: • Bachelor's degree in Construction Management, Engineering, Architecture, Project Management, or a related field preferred. Experience may be considered in lieu of formal education., • 5+ years of experience supporting commercial, industrial, mission-critical, manufacturing, infrastructure, or large-scale construction projects in a field-based construction, scheduling, project engineering, superintendent, construction management, or planning role, • Proven experience utilizing Primavera P6 to develop, maintain, analyze, and validate construction schedules in support of active field operations., • Strong understanding of construction means and methods, trade sequencing, site logistics, procurement, commissioning, startup, turnover, and operational readiness activities., • Experience working directly with General Contractors, superintendents, subcontractors, and trade partners to validate schedule assumptions, construction sequencing, manpower loading, and reported progress against actual field conditions., • Ability to identify schedule risks, analyze critical path activities, evaluate recovery plans, and communicate schedule impacts and recommendations to project teams and leadership., • Strong communication, organizational, and problem-solving skills with the ability to influence stakeholders, challenge assumptions, and drive accountability in a fast-paced construction environment., • Ability to maintain a consistent on-site presence, perform routine field walks, and travel as required to support project assignments. Preferred Qualifications • Experience supporting mission-critical, data center, hyperscale, colocation, AI infrastructure, or other technically complex construction projects., • Experience working within an Owner's Representative, developer, tenant-representative, or owner's project management environment., • Experience integrating construction schedules with commissioning, startup, testing, and turnover milestones., • Familiarity with Pull Planning, Last Planner System®, Lean Construction principles, or collaborative planning methodologies., • PSP, PMP, CCM, or similar industry certifications. Duties and Responsibilities: Field Validation & Construction Planning • Maintain an active on-site presence to validate that contractor schedules, sequencing plans, and reported progress accurately reflect field conditions and actual construction activities., • Work directly with General Contractor schedulers, superintendents, and trade partners to evaluate construction sequencing, crew loading, workfront availability, and execution readiness., • Walk the project regularly to identify schedule risks, coordination conflicts, access constraints, material shortages, and productivity issues before they impact project milestones., • Provide independent feedback to project leadership regarding schedule health, field performance, and the realism of contractor planning assumptions. Schedule Management & Analysis • Own and maintain the owner's view of the project schedule, incorporating field observations, contractor updates, procurement activities, commissioning milestones, and project priorities., • Review contractor Primavera P6 schedules, logic, float trends, milestone forecasts, and recovery plans to evaluate alignment with actual construction progress., • Analyze schedule changes, delays, recovery strategies, and critical path activities to identify risks and opportunities impacting project delivery., • Challenge schedule assumptions and progress updates that are inconsistent with field conditions or observed construction performance Project Coordination & Delivery Support • Participate in weekly planning meetings, look-ahead reviews, contractor coordination meetings, and superintendent planning sessions to support reliable project execution., • Coordinate construction sequencing with procurement, equipment deliveries, commissioning activities, startup events, and turnover milestones., • Track owner-furnished equipment, vendor activities, and long-lead procurement items that may affect schedule performance and project delivery., • Support project teams in identifying recovery opportunities and implementing mitigation strategies when schedule risks are identified. Commissioning & Turnover Integration • Align construction schedules with commissioning, startup, testing, and turnover milestones to ensure project delivery remains focused on operational readiness., • Support integration of Level 1 through Level 5 commissioning activities into project planning and schedule coordination efforts., • Monitor readiness for system startup, turnover, and commissioning activities and identify constraints that may affect completion dates., • Coordinate with project controls, commissioning teams, contractors, and vendors to ensure schedule priorities support successful turnover objectives. Reporting & Stakeholder Communication • Prepare weekly schedule reports, milestone updates, and risk summaries highlighting key project activities, constraints, delays, and recovery actions., • Communicate schedule performance, emerging risks, and recommended actions to project leadership in a clear and actionable manner., • Build effective working relationships with contractors, superintendents, vendors, consultants, and project stakeholders to promote collaboration and schedule accountability., • Support projects operating under either tenant-representation or developer delivery models and adapt communication and coordination approaches accordingly. Benefits Offered: • Medical insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Accident Insurance, • Long Term Disability, • 401(k) retirement plan with 4% KALCON match when an employee contributes at least 5%, • 15 days of paid time off, • 8 paid National Holidays, • Reimbursement for professional licenses and certifications Submission Requirements: At a minimum, the candidate's professional resume must include the following: • List of all Educational Achievements, • List of all Professional Licenses or Certificates, • List of Awards Received, • Detailed Employment History with each company including:, • Name & Contact Information of the firm or agency, • Start Date and End Date (Month & Year), • Positions Held At KALCON we are committed to creating an inclusive, diverse, and equitable workplace where every individual is respected and valued. We are an equal opportunity employer and all applicant and employees will receive consideration for employment as we do not tolerate discrimination of any kind based on race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetics, protected veteran status or any other protected characteristic as outlined by federal, state, or local laws. We believe that a diverse workforce contributes to the success of our company and the innovation behind the exceptional projects we deliver. We encourage and support applicants from all backgrounds, experiences, and perspectives to join our team and thrive. Our hiring and employment practices are guided by principles of fairness, equality, and opportunity for all. Salary Range $140,000—$200,000 USD

Job DescriptionSUMMARY The Production Remanufacturing Technician is responsible for the disassembly, inspection, refurbishment, assembly, and testing of diesel-driven and electric-driven pump packages. This position supports the complete remanufacturing process of pump packages, including pumps, engines, trailers, fuel systems, enclosures, control panels, and related components. ESSENTIAL DUTIES AND RESPONSIBILITIES (include the following, however, other duties may apply) • Disassemble pump packages and major components according to established procedures., • Inspect pumps, engines, trailers, fuel systems, enclosures, control panels, and related equipment for wear, damage, or repairs., • Clean, repair, and recondition components for reuse when applicable., • Assemble diesel-driven and electric-driven pump packages on skids, trailers, and sound-attenuated enclosures., • Read and interpret blueprints, schematics, assembly drawings, and bills of material., • Install and route wiring, control panels, instrumentation, piping, and package accessories., • Operate hand tools, power tools, forklifts, and overhead cranes safely., • Perform quality inspections throughout assembly and remanufacturing processes., • Maintain accurate production records and remanufacturing documentation., • Follow all company safety policies and maintain a clean work area., • Must be willing and able to travel 10% to 20% as required to support field service activities, customer installations, training, inspections, and other business needs. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities QUALIFICATIONS Strong mechanical aptitude, ability to read drawings, experience with hand and power tools, attention to detail, and ability to work effectively in a team environment. EDUCATION and/or EXPERIENCE • Previous experience in a warehouse or manufacturing setting preferred, • High mechanical aptitude, • Proficiency with power tools and hand tools, • Ability to work efficiently on a shop floor, • Familiarity with operating cranes/forklifts is a plus, • Experience with diesel engines, pump systems, industrial equipment, manufacturing, assembly, remanufacturing, forklifts, and overhead cranes., • Mechanical knowledge: 1 year (Required), • Manufacturing: 2 years (Required)LANGUAGE SKILLS Effectively communicate and understand job instructions both verbally and written in the English language. PHYSICAL DEMANDS • Prolonged periods standing and performing repetitive tasks, • Must be able to lift up to 30 pounds at a time, • Must have manual dexterity in order to assemble products or machines as directed, • Must have excellent hand-eye coordination, • Ability to differentiate between colored wires, tabs, and electronic components, • Must wear gloves and ear protectionWORK ENVIRONMENT, • Outside and inside, • Extreme heat, • Extreme humidity, • Extreme noise, intermittent, • Dust, • Fumes, smoke, or gasses, • Solvents (degreasing agents), • Slippery or uneven walking surfaces

Job Description A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. This role requires significant travel, with expectations of up to 50-75% annually, especially if you are not currently residing near one of our key job site locations such as: • South Dallas, TX, • Lubbock, TX, • Charlotte, NC, • Montgomery, AL, • Waco, TX, • Shreveport, LA Responsibilities • Review available training documentation and effectively apply it to daily activities., • Communicate clearly, confidently, and professionally with Clients / Engineers of Record / GC's / Subs / Vendors., • Learn the Cx process to effectively implement in the field., • Develop Cx procedures with use of a template., • Become familiar with testing durations to assist PM with Cx Schedule development., • Learn how to develop load bank plans to effectively test mechanical systems during integrated testing., • Assist in the development of TAB Verification plan., • Conduct TAB Verification as directed., • Deploy data loggers in the proper areas for required data collection with direction., • Execute functional testing with support of team members., • Fill in a daily onsite testing log., • Perform infrared (IR) scanning/analysis and record data in spreadsheet., • Mark IR photos for mechanical equipment., • Assist in the development of an IST Report including excel charts of data collected. Requirements • Work experience: None required., • Education: 4-year college degree or equivalent field experience, • Training: None required, • General understanding of all mechanical and electrical building systems, • Military experience a plus, • Computer Skills: Microsoft Office programs, • Math Skills: Must be able to calculate figures and amounts (percentages and proportions), • Communication: Understands instructions and can convey information to others in a simple and unambiguous way, • Organizational skills

Job DescriptionWhy Work for Century Builders Century Builders is a growing leader in mission critical construction, delivering complex hyperscale data center projects with a strong focus on safety, precision, and teamwork. We offer the opportunity to work on high impact projects in a fast paced, collaborative environment where your expertise directly influences project success. Position Details Company: Century Builders Location: TX-01, Silverton, TX Workplace type: On site/site based; regular presence at the project site is required. Employment type: Full time, exempt Reports to: Safety Manager / Sr. Superintendent Travel/relocation: Travel, relocation, per diem, housing, and potential future project site assignments will be discussed during the interview. Base salary: $80,000–$100,000 per year, depending on experience, certifications, and qualifications Position Summary Century Builders is seeking a motivated, detail-oriented Safety Technician to support safe construction activities at a live or partially energized data center project. This on site role supports the Safety Manager by implementing site safety programs, monitoring high risk work, coaching project teams and trade partners, and helping ensure compliance with company, regulatory, client, and site-specific safety requirements. The Safety Technician works closely with project leadership, field operations, commissioning teams, trade partners, and owner representatives to identify hazards, support safe work planning, and protect personnel, property, and critical facility operations. Key ResponsibilitiesMission Critical Safety Oversight Enforce safety protocols specific to data center environments and client expectations. Monitor high risk activities including energized work, crane picks, confined spaces, and MOP/SOP/EOP execution. Ensure compliance with owner required safety standards and site-specific procedures. Compliance, Documentation & Controls Maintain and enforce site specific safety plans, JHAs, and risk assessments. Review pre-task plans for completeness and compliance with established safety requirements. Track safety metrics, incident reports, near misses, and corrective actions. Assist with audits and support compliance with OSHA requirements, NFPA 70E standards, and owner requirements. Field Presence & Coordination Conduct daily safety walks and coach crews on safe work practices. Support work sequencing to minimize risk and prevent system conflicts. Coordinate proper Lockout/Tagout (LOTO) procedures with trade partners. Participate in daily huddles, toolbox talks, and emergency response drills. High Risk Work Management Oversee electrical safety protocols, including arc flash boundaries and PPE compliance. Verify permitting for hot work, confined space, elevated work, and critical operations. Ensure mechanical and electrical shutdowns follow approved MOPs and are safely executed. Monitor commissioning, equipment startup, and system energization activities. Exercise stop work authority when unsafe conditions or practices present an immediate safety concern, and communicate identified concerns to appropriate project leadership. Emergency Preparedness & Incident Response Assist with emergency response planning and drills. Respond to incidents, secure affected areas, and support investigations. Communicate effectively with the Safety Manager, project leadership, and owner representatives during safety events. Required Qualifications OSHA 30 Hour Construction certification. Current First Aid, CPR, and AED certification 3+ years of construction safety, field safety, or related construction experience. Working knowledge of OSHA construction standards, job hazard analysis, incident reporting, hazard recognition, and corrective action processes. Ability to communicate clearly with craft workers, supervisors, subcontractors, and project leadership. Ability to work safely and effectively in an active construction environment. Preferred Qualifications Experience supporting data center, mission critical, industrial, advanced manufacturing, healthcare, utility, or other high risk construction environments. Experience with energized work controls, NFPA 70E, LOTO, arc flash boundaries, crane picks, hot work, confined space entry, commissioning, and equipment energization. CHST, ASP, CSP, or similar safety credential. Experience using Procore or comparable safety management/project management software. Experience conducting safety training, toolbox talks, audits, incident investigations, and root cause analysis. Skills and Competencies Strong communication and interpersonal skills, with the ability to train and motivate teams. Excellent organizational skills, with the ability to manage multiple projects and deadlines. Knowledge of Microsoft Office Suite and Procore safety management software preferred. Analytical mindset, with the ability to evaluate safety performance data and implement improvements. Ability to work both independently and collaboratively in a fast-paced environment. Physical Requirements Must be able to stand, walk, and navigate active construction sites for extended periods, with or without reasonable accommodation. Ability to lift up to 50 pounds and use basic safety equipment, with or without reasonable accommodation. Compensation & Benefits Insert base salary range: $80,000–$100,000 per year, DOE and qualifications Additional compensation may be available based on applicable company or project-related programs. Details will be discussed during the interview. Comprehensive benefits package, including health, dental, and vision coverage Paid time off and sick leave SIMPLE IRA with employer matching Opportunities for professional growth and advancement within the Mission Critical Division This position may include per diem, housing, relocation, certification, and training benefits, as applicable. Vehicle allowance availability and details will be discussed during the interview. Work Schedule Schedule and standard site hours will vary based on project requirements and whether the employee is a traveler. Specific expectations will be discussed during the interview. Nights, weekends, overtime, shutdown windows, and/or commissioning coverage may be required based on project needs. Specific requirements will be discussed during the interview. About Century Builders Century Builders is a leader in commercial construction (post frame, steel, and precast) in the Upper Midwest. With a commitment to excellence, innovation, and safety, we deliver exceptional projects that shape our communities. How to Apply To apply, please submit your resume and a brief cover letter outlining your construction safety experience, relevant certifications, and experience supporting commercial, industrial, mission critical, or other complex construction projects. Please highlight experience with jobsite safety inspections, pre-task planning, hazard identification, safety training, incident reporting and investigation, OSHA compliance, and working with project teams to identify and address safety concerns. Equal Employment Opportunity Century Builders is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable federal, state, or local law. #hc261909

Job Description General Foreman – Teledata About Cache Valley Electric Founded in 1915, Cache Valley Electric (CVE) is one of the nation's leading electrical contractors and the largest electrical contractor headquartered in Utah. As a family-owned company with more than 100 years of experience, CVE delivers electrical construction, technology integration, and mission-critical infrastructure projects across the United States. CVE is known for its commitment to safety, quality, innovation, and building long-term relationships with both customers and employees. Position Summary Cache Valley Electric is seeking an experienced General Foreman to provide field leadership on large-scale data center and mission-critical technology infrastructure projects. The General Foreman will oversee crews performing fiber optic, structured cabling, and low-voltage infrastructure installations while ensuring work is completed safely, efficiently, on schedule, and in accordance with project specifications and CVE quality standards. This position requires a strong background in fiber optic installation and termination, structured cabling, crew leadership, production planning, testing, troubleshooting, and large-scale mission-critical construction. Key Responsibilities • Provide day-to-day field leadership for fiber optic, structured cabling, and teledata installation crews on large-scale mission-critical projects., • Lead and coordinate Foremen, Lead Technicians, Fiber Technicians, and other field personnel., • Plan daily and weekly manpower, production goals, work areas, material requirements, and installation activities., • Coordinate installation of fiber optic backbone, horizontal cabling, copper cabling, pathways, racks, cabinets, ladder rack, cable tray, and related telecommunications infrastructure., • Oversee fiber pulling, routing, dressing, splicing, termination, labeling, testing, and documentation., • Ensure installations meet project drawings, specifications, manufacturer requirements, applicable codes, and customer standards., • Read and interpret construction drawings, telecommunications plans, specifications, riser diagrams, details, and installation documentation., • Coordinate closely with Superintendents, Project Managers, Project Engineers, General Contractors, other trades, and customer representatives., • Monitor field productivity, manpower utilization, schedule performance, and installation progress., • Identify potential schedule, manpower, material, or constructability issues and communicate them to project leadership., • Ensure crews have the tools, materials, equipment, information, and access required to maintain production., • Conduct daily planning meetings, toolbox talks, and crew assignments., • Maintain a strong focus on safety and ensure compliance with CVE, customer, and project-specific safety requirements., • Perform quality-control inspections and ensure deficiencies are corrected promptly., • Oversee fiber testing and certification, including review of test results and documentation., • Support troubleshooting of fiber optic and structured cabling systems., • Track completed work, quantities, manpower, and production against project goals., • Coordinate material staging, deliveries, equipment, and work-area readiness., • Assist with redlines, as-built drawings, test documentation, turnover packages, and project closeout., • Mentor and develop Foremen, Lead Technicians, and field personnel., • Maintain professional communication with project leadership, customers, and other trades., • Promote a culture of accountability, safety, quality, teamwork, and productivity. Requirements • 4+ years of experience in telecommunications, structured cabling, fiber optics, low-voltage construction, or a related field., • 3+ years of field leadership experience as a Foreman, General Foreman, Superintendent, or similar position., • Strong experience working on large-scale data center, mission-critical, industrial, or similarly complex construction projects., • Advanced knowledge of fiber optic installation, termination, splicing, testing, and troubleshooting., • Strong understanding of single-mode and multimode fiber optic systems., • Experience with high-density fiber infrastructure and large fiber-count installations., • Experience with structured cabling systems, telecommunications rooms, racks, cabinets, pathways, and cable-management systems., • Ability to read and interpret construction drawings, telecommunications plans, specifications, and technical documentation., • Demonstrated ability to lead multiple crews and coordinate manpower across multiple work areas., • Strong understanding of construction sequencing, scheduling, production tracking, and field planning., • Ability to identify installation conflicts and coordinate solutions with project leadership and other trades., • Strong knowledge of construction and jobsite safety requirements., • Strong communication, leadership, organization, and problem-solving skills., • Ability to work in a fast-paced construction environment and meet aggressive project schedules., • Ability to travel or work on project assignments as required. Benefits What We Offer • Competitive compensation, • Industry-leading, low-cost medical, dental, and vision benefits designed to provide exceptional value for employees and their families, • Discretionary Yearly bonus, • Comprehensive medical, dental, and vision insurance, • Up to 15% yearly profit sharing, • Paid time off and company holidays, • Opportunities for professional growth and advancement Reasonable accommodations will be made upon request for those who have disabilities that qualify under the Americans with Disabilities Act. Cache Valley Electric Company is an Equal Opportunity Employer with an Affirmative Action Plan.

Job Description Superintendent – Teledata Position Summary Cache Valley Electric is seeking an experienced Superintendent to join our Teledata division and lead field operations on large-scale, mission-critical data center projects. This position is responsible for overseeing the day-to-day execution of teledata and low-voltage scopes, including structured cabling, fiber optic infrastructure, pathways, equipment installation, testing, and commissioning support. The Superintendent will work closely with Project Managers, General Foremen, field crews, general contractors, and other trades to ensure work is completed safely, efficiently, on schedule, and to CVE's quality standards. The ideal candidate is a strong field leader with hands-on experience delivering complex data center or mission-critical telecommunications projects and managing large crews in fast-paced construction environments. What You'll Do • Provide overall field leadership for Teledata operations on large-scale data center projects., • Plan, coordinate, and supervise installation of structured cabling, fiber optic systems, copper cabling, pathways, racks, cabinets, and associated low-voltage infrastructure., • Lead General Foremen, Foremen, technicians, and field crews while maintaining productivity and accountability., • Coordinate daily and weekly work activities based on project schedules, milestones, manpower requirements, and site conditions., • Develop short-term look-ahead plans and communicate manpower, material, equipment, and scheduling needs to project leadership., • Coordinate Teledata activities with the general contractor, electrical teams, other subcontractors, vendors, and project stakeholders., • Review drawings, specifications, submittals, RFIs, and installation requirements to ensure field work meets project requirements., • Identify constructability issues, conflicts, and potential schedule impacts before they affect production., • Monitor labor productivity and manpower utilization and make adjustments when necessary., • Ensure materials, tools, and equipment are available to crews when needed., • Oversee installation quality and ensure work meets CVE standards, customer requirements, applicable codes, and project specifications., • Support fiber and copper testing, labeling, documentation, punch-list completion, commissioning, and turnover activities., • Conduct field walks and monitor project progress against established schedules and milestones., • Maintain accurate field documentation and communicate project status to Project Managers and leadership., • Participate in project coordination, scheduling, safety, and progress meetings., • Promote and enforce CVE's safety standards and ensure crews maintain a safe, organized job site., • Mentor and develop field leadership and technicians while building a strong, accountable team., • Support project closeout and ensure all outstanding field work, testing, documentation, and punch-list items are completed. Requirements • 5+ years of experience in telecommunications, structured cabling, low-voltage, or related construction., • Previous experience as a Superintendent, General Foreman, Foreman, or similar field leadership position., • Data center or mission-critical construction experience preferred., • Strong understanding of structured cabling systems, fiber optic infrastructure, copper cabling, pathways, racks, cabinets, and telecommunications spaces., • Experience managing large crews and multiple areas of work simultaneously., • Ability to read and interpret construction drawings, specifications, schedules, and technical documentation., • Strong understanding of construction sequencing, manpower planning, production tracking, and field coordination., • Experience coordinating with general contractors and multiple trades on complex construction projects., • Knowledge of fiber installation, termination, testing, labeling, and documentation processes., • Strong leadership, communication, organization, and problem-solving skills., • Ability to identify potential issues and develop solutions before they impact the project., • Comfortable working in fast-paced environments with aggressive project schedules., • Strong commitment to safety, quality, and accountability., • Ability to travel or work on project sites as required. Benefits What We Offer • Competitive compensation, • Industry-leading, low-cost medical, dental, and vision benefits designed to provide exceptional value for employees and their families, • Discretionary Yearly bonus, • Comprehensive medical, dental, and vision insurance, • Up to 15% yearly profit sharing, • Paid time off and company holidays, • Opportunities for professional growth and advancement Reasonable accommodations will be made upon request for those who have disabilities that qualify under the Americans with Disabilities Act. Cache Valley Electric Company is an Equal Opportunity Employer with an Affirmative Action Plan.

Job Description2027 Summer InternshipAbout Cache Valley Electric Cache Valley Electric is a leading electrical contractor with a long-standing reputation for delivering high-quality electrical construction projects across the country. Our teams work on complex and challenging projects while maintaining a strong commitment to safety, quality, innovation, teamwork, and customer service. At Cache Valley Electric, we believe the best way to learn construction is to be part of it. Our internship program gives students the opportunity to work alongside experienced professionals, contribute to active projects, and gain practical experience that goes beyond the classroom. Internship Overview The Project Engineer Internship provides hands-on experience in electrical construction and project management while giving you the opportunity to apply to real-world construction projects. You will work alongside experienced Project Managers, Project Engineers, Superintendents, and field teams while gaining exposure to the day-to-day operations of active electrical construction projects. Throughout the internship, you will gain an understanding of the complete project lifecycle, including preconstruction, planning, scheduling, procurement, cost tracking, project documentation, field coordination, safety, and project closeout. You will have opportunities to participate in project meetings, review drawings and specifications, assist with RFIs and submittals, track materials and equipment, and support communication between project management and field operations. Our goal is to provide you with meaningful responsibilities and real project experience rather than simply observing from the sidelines. We hope you will be encouraged to ask questions, contribute ideas, solve problems, and develop the technical, leadership, and communication skills necessary to build a successful career in the electrical construction industry. What You'll Do As a Project Engineer Intern, you will have the opportunity to: • Assist Project Managers and Project Engineers with day-to-day project activities., • Work closely with project management, field supervision, and other members of the project team., • Review construction drawings, specifications, and other project documents., • Assist with preparing, tracking, and maintaining Requests for Information (RFIs) and submittals., • Help coordinate project documentation between the office and field., • Assist with material and equipment procurement, tracking, and delivery coordination., • Participate in project planning, coordination, and progress meetings., • Gain exposure to project schedules and assist with tracking project milestones and deadlines., • Learn how project costs, budgets, change orders, and forecasts are managed., • Assist with quantity takeoffs and other estimating or project-related tasks as needed., • Coordinate with vendors, suppliers, subcontractors, and other project partners., • Visit active construction areas and gain firsthand exposure to field operations., • Work with field supervision to understand construction sequencing, productivity, and installation methods., • Assist with project quality control and closeout documentation., • Follow all company and project-specific safety requirements., • Complete additional project assignments and responsibilities as directed by the project team.What You'll Learn This internship is designed to provide exposure to multiple areas of electrical construction and project management, including: • Electrical construction operations, • Understand Our Mission Critical Projects, • Project management fundamentals, • Construction drawings and specifications, • RFIs and submittals, • Project scheduling, • Cost tracking and forecasting, • Change management, • Material and equipment procurement, • Field coordination, • Construction safety, • Quality control, • Project documentation, • Communication with general contractors, subcontractors, vendors, engineers, and field personnel, • Leadership and problem-solving in a construction environment By the end of the internship, students should have a stronger understanding of how electrical construction projects move from planning and preconstruction through installation and project closeout. Internship Details Position: Project Engineer Intern Employment Type: Internship Location: Salt Lake City, Utah , Lubbock, Texas, Logan, Utah Internship Term: Summer 2027 Start Date: May 1st, 2027 End Date: August, 15th 2027 Schedule: Monday- Friday Hours: 40 hours per week Travel: Some travel may be required depending on project needs and internship assignment. Interns may have opportunities to visit active project sites, company offices, and other locations to gain hands-on exposure to different aspects of electrical construction. Travel expectations will vary by position and project location and will be communicated prior to the start of the internship. Compensation Pay: Paid Internship,Monthly Gas Stipend,Overtime Pay where applicable. Your Future at Cache Valley Electric Successful interns may be considered for future internship opportunities or full-time positions with Cache Valley Electric following graduation based on individual performance, available opportunities, and business needs. Equal Employment Opportunity Cache Valley Electric is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other status protected by applicable federal, state, or local law. Requirements • Currently pursuing a degree in Construction Management, Electrical Engineering, Construction Engineering, Civil Engineering, or a related field., • Interest in pursuing a career in construction, electrical construction, engineering, or project management., • Strong communication and interpersonal skills., • Ability to work effectively as part of a team., • Strong organizational skills and attention to detail., • Ability to manage multiple assignments and priorities., • Willingness to learn, ask questions, and take initiative., • Basic proficiency with Microsoft Office applications, including Excel, Word, and Outlook., • Ability to work in both office and active construction-site environments.Preferred, • Previous construction, engineering, or internship experience., • Familiarity with construction drawings and specifications., • Exposure to construction technology or software such as Bluebeam, Procore, AutoCAD, Revit, or similar programs., • Previous coursework related to construction management, estimating, scheduling, engineering, or project management. Previous electrical construction experience is not required. We are looking for motivated students who are eager to learn and interested in building a career in the construction industry.

Job Description Field Service Technician - Network & Technology Services : Acuative is seeking a dependable and technically capable hands-on Field Service Technician to provide installation, maintenance, troubleshooting, and Smart Hands support for network and technology infrastructure at customer locations. Technicians work with a wide variety of network, communications, computing, and low-voltage infrastructure and frequently coordinate with remote Network Operations Centers (NOCs), engineers, project coordinators, and customer technical teams to complete installations and resolve service issues. This is a full time benefits eligible position that includes a company vehicle, gas card for vehicle, inventory, and training. Prior field service, IT, networking, telecommunications, or structured cabling experience is preferred. However, candidates with a strong technical background, mechanical aptitude, and a demonstrated willingness to learn are encouraged to apply. Acuative provides paid training and technical support for the work our technicians perform. Technicians serve as the Onsite Smart Hands resource, performing physical installation, cabling, testing, troubleshooting, equipment replacement, and other hands-on tasks while working with remote technical resources when configuration or advanced troubleshooting is required. This position requires a person willing to go to new places. Tickets can be assigned four or more hours away to provide installation and maintenance services to voice and data networks, servers, computer systems, retail technology systems, and other network-based hardware. Acuative technicians are guaranteed forty (40) hours of pay per week even if not dispatched for forty hours. To be eligible for this role you must have a clear driver’s license (no more than 4 points), have the Covid-19 vaccination, and willing to work mostly M-F with opportunity for overtime and call out pay after hours and weekends. This position often works alone, and qualified applicants must be able to lift up to fifty pounds above head and climb a ladder. Acuative is a drug free workplace. Overview : Acuative, the nation's leading independent provider of telecommunications field services, seeks a Field Service Technician. The successful candidate will spend the majority of their time covering the (MARKET) area providing installation and maintenance services to voice and data networks, servers, computer systems, retail technology systems, and other network-based hardware. Primary Duties and Responsibilities : The position involves a variety of tasks including but not limited to: • Install, replace, relocate, rack, stack, mount, and provide Smart Hands support for routers, switches, wireless access points, firewalls, cellular gateways, SD-WAN equipment, servers, circuits, telephony and other network-based hardware., • Perform physical installation and replacement of equipment from a variety of manufacturers and technology platforms, including circuit extensions, structured cabling, fixed wireless, and Low Earth Orbit (LEO) satellite solutions., • Perform equipment cutovers and migrations while working with remote engineers, NOCs, project teams, and customer technical resources., • Locate, identify, label, and document telecommunications circuits, circuit IDs, demarcation points, network equipment, ports, cabling, and associated infrastructure., • Troubleshoot copper cabling and connectivity using appropriate test equipment, including cable testers, toner/probe sets, and related tools. Perform circuit extensions and other low-voltage cabling work as required., • Conduct site surveys and site audits to document existing infrastructure, equipment, cabling, power availability, installation requirements, and other site conditions., • Install LEO satellite and fixed wireless equipment, including exterior mounting, antenna installation, cable routing from exterior to interior locations, and associated indoor network equipment. Installation of Fixed Wireless Antennas, cables and hardware., • Carry and position tools, networking equipment, mounting hardware, ladders, satellite installation components, ballast/cinder blocks, and other materials required for field installations., • Complete all required job deliverables accurately and on time. Deliverables may include photographs, ticket notes, equipment and serial-number information, Microsoft Excel survey forms, sign-off documents, installation checklists, test results, and customer-specific electronic forms or applications., • Maintain assigned company vehicle, inventory, tools, test equipment, and safety equipment according to departmental standards., • Ability to work off a lift or ladder at heights up to 30 feet or more. Preferred Qualifications : • Working knowledge of networking hardware and topologies., • Previous experience in IT field services, telecommunications, networking, structured cabling, computer hardware, electronics, or a related technical field., • Ability to identify and work with routers, switches, wireless access points, firewalls, cellular gateways, modems, servers, telecommunications circuits, and related hardware., • Basic understanding of telecommunications circuits, demarcation points, circuit extensions, and connectivity troubleshooting., • Knowledge of computing systems hardware with the ability to provide break/fix support for desktop PC and/or servers., • Physical installations of a wide variety of hardware including routers, switches, WAPs, servers, POS systems, digital signage systems, and associated peripheral equipment., • Ability to provide configuration support for a variety of technology platforms through console and remote applications., • Understanding of telephony systems (VOIP, PBX, Key Systems) with an ability to provide hands-on hardware and troubleshooting support., • Experience with LEC circuit identification and extensions., • Familiarity with cabling standards and the ability to pull and terminate cabling in a variety of customer environments., • Ability to operate basic power tools – drills, saws, etc., • Work on ladders and lifts where required., • Working knowledge of Microsoft Office applications (Excel & Word)., • Ability to follow detailed job documents., • Must be willing to travel as needed to meet customer SLAs., • On-call, after hours, and weekend work may be required., • Must possess a valid drivers’ license with good driving record., • Experience installing LEO Satellite (such as Starlink) and/or Fixed Wireless antennas., • Ability to work off a lift or ladder at heights up to 30 feet or more. Education & Certifications : • Associate’s degree in information technology or equivalent experience., • CompTIA networking, Cisco, Cabling, BICSII, Satellite, PBX or VoIP system certifications a plus!, • Selected candidates will be required to attend a hardware and cabling training course at our Global Technology Center in Strongsville, OH. The Ideal Candidate : The ideal Field Service Technician is someone we can depend on. You do not need to know every piece of equipment you will encounter on day one. Technology, customers, and project requirements continually change, and training and remote technical support are available. What matters is having a solid technical foundation, the ability and desire to learn, good judgment, and the willingness to work through unfamiliar problems. Our strongest technicians are comfortable working independently, traveling wherever the work requires, communicating professionally with everyone they encounter, and taking ownership of their assignments. They understand when to troubleshoot independently, when to engage remote technical resources, and when a customer Scope of Work requires approval before making a change. If you enjoy hands-on technology, solving problems in the field, learning new systems, and working in an environment where no two assignments are exactly the same, this position may be a strong fit.

Job Description Meade is a full-service design firm specializing in innovative and cost-effective engineering solutions for data centers, cloud providers, and large-scale construction projects. Our team of expert engineers, designers, and consultants is dedicated to delivering high-quality, reliable, and sustainable solutions that drive the industry forward. At Meade, we foster a collaborative and dynamic work environment where creativity, technical excellence, and professional growth are at the forefront. We take pride in our commitment to innovation, efficiency, and superior service-values that not only define our projects but also shape our workplace culture. If you're looking to be part of a company that values expertise, teamwork, and cutting-edge design, we'd love to hear from you! Job Description: Meade has a job opportunity for an Electrical Commissioning Tech to commission mission critical data center electrical equipment systems for a world class technology company. This commissioning role will assist in the commissioning process for power generation and distribution systems, uninterruptible power supplies (UPS), automatic transfer switches (ATS), power distribution units (PDUs), medium-voltage switchgear, protective relaying systems, and related electrical infrastructure. The candidate must have a working knowledge of electrical power systems or equivalent industry experience, along with strong communication and leadership skills. This position will require a minimum of 100% travel. Job Duties: • Assist with developing, overseeing, and writing commissioning policies, scripts and procedures., • Validate equipment installations., • Perform construction observations and develop thorough test plans., • Execute tests for a wide variety of electrical and mechanical systems and ensure testing is performed in conformance with standards and specifications., • Review and analyze data and prepare technical reports., • Review design documents and equipment submittals., • Maintain effective communication with clients, contractors and other project team members. Minimum Qualifications: • 2+ years of industry experience with a strong emphasis in data centers preferred., • Bachelors of Science in Electrical Engineering is preferred but will consider other engineering disciplines, two (2) year degree, military training, or equivalent work experience., • Passion for leading in moments of ambiguity, particularly in the realm of construction and electrical operational problems., • Excellent leadership, communication, and interpersonal skills., • Top-notch organization in addition to excellent written and oral communication skills., • Experience with MS Office products is critical., • Must thrive in a fast-paced environment, be motivated by deadlines, and possess the ability to multi-task, • Working knowledge of building codes and construction industry standards., • Experience conducting quality control of electrical construction documents., • Proficiency with AutoCAD. Bluebeam experience a plus., • Professional certifications (e.g., Certified Commissioning Professional) are a plus. Compensation & Benefits: Compensation and benefits are subject to eligibility requirements and may vary based on location and applicable laws. The pay range for this position will be provided in accordance with applicable state and local laws. Actual compensation will be determined based on factors such as skills, experience, qualifications, internal equity, geographic location, and business needs. Eligible employees may participate in Meade-sponsored benefit programs, including medical, dental, vision, life insurance, disability coverage, 401(k), paid time off, paid holidays, and other company-sponsored benefits. Benefit eligibility and offerings are subject to plan terms and applicable policies. The estimate pay range for this role is as follows: $97,300—$120,600 USD Equal Opportunity Employer: Information submitted during the application process will be handled in accordance with applicable privacy laws. Meade provides equal employment opportunity in all aspects of employment. We do not discriminate against employees or applicants based on race, color, religion, creed, national origin, ancestry, citizenship status, sex, gender, gender identity, gender expression, sexual orientation, pregnancy (including childbirth, breastfeeding, lactation, and related medical conditions), age, disability, genetic information, marital status, military or veteran status, or any other characteristic protected by applicable federal, state, or local law. In compliance with federal law, Meade provides applicants and employees with access to the EEOC Know Your Rights: Workplace Discrimination is Illegal poster. CA Residents: SB294 Know Your Right Notice. All employment is based on qualifications, merit, and business need. If you require a reasonable accommodation due to a disability during the application process, please contact our team at recruiting@meadeengineering.com. Employment with Meade is at-will, meaning either the employee or Meade may terminate the employment relationship at any time, with or without cause or advance notice, subject to applicable law. The responsibilities listed in this job description are intended to describe the general nature of the role and are not an exhaustive list. Duties and responsibilities may change at any time with or without notice. Applicants must be legally authorized to work in the United States. Employment eligibility will be verified as required by law. Employment may be contingent upon the successful completion of background checks, drug testing, and other pre-employment requirements, permitted by applicable law. Drug-Free Workplace: Meade maintains a Drug-Free Workplace. Post-offer applicants and employees may be subject to drug and alcohol testing in accordance with applicable law, company policy, client requirements, and job-related safety considerations. Privacy Policy - Meade

Job Description Job title Parts Specialist Reports to Branch Parts Manager FLSA Non-Exempt Workers’ Comp Status Clerical Office Employees (Code 8810) Job purpose Responsible for assisting all customers, technicians, and other parts’ personnel in securing needed parts and supplies. Duties and responsibilities • Assisting customers determine necessary parts needed, • Looking up and processing customer orders, • Locating and obtaining parts to fill manufacturers’ back orders for customer tickets, • Reviewing customer or shop return parts with parts manager, • Assisting in processing all shipping and receiving, • Entering all stock order, • Maintaining a log for all core returns, • Maintain a clean, organized, professional and safe work environment, • Perform other tasks as required by the Branch Parts Manager Qualifications Education/Experience • High school diploma or equivalent,, • Related experience and/or training Knowledge • Microsoft Office Suite (Excel, Word, PowerPoint, and Outlook), • Knowledge of the area. Skills • Good negotiation skills, • Good verbal and writing communication skills, • Good computer skills, • Good phone skills, • Good customer service skills, • Good research skills, • Time management Abilities • Demonstrate customer service orientation, • Ability to organize and manage multiple priorities, • Listen and understanding information and ideas presented, • Concentrate on a task over a period of time without being distracted, • Work well with others, • Ability to accomplish duties with accuracy and timeliness, • Ability to understand various computer system resources for research requirements, • Ability to obtain and maintain forklift certification Other characteristics such as personal characteristics • Commitment to company vision and mission, • Detailed oriented Travel This position does not travel at this time. Working Environment and Physical demands The work environment characteristics described here representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Working environment While performing this duty, the employee will be exposed to the usual moderate (general office area) noise level, however, the employee can be exposed to noisier shop environments. When performing the duties of this job, it is a requirement to wear Personal Protective Equipment whenever necessary. This role routinely uses standard office equipment such as Desktop computer, smartphones, photocopiers, filing cabinets, and scanners Physical requirements While performing this duty, the employee will required to frequently sit, walk, talk, and listen. The employee is required to frequently use hands to fingers, handle, or feel objects or controls, including products we rent, computer and other office equipment. The employee must often stand and walk, and lift and/or move up to 75 pounds. Appropriate material handling equipment should be used to lift or move items that are heavy or bulky. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Other Duties Please note this job description in not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Are you an established sales expert with a passion for winning market share in the medical device landscape? We are seeking an exceptional Sales Executive – Full Line, Lubbock, TX to join our dynamic sales organization. In this territory, you will deliver our industry-leading endoscopic products and solutions to healthcare providers across hospitals, surgery centers, clinics, and physician offices. You'll be more than just a salesperson, you'll be a trusted consultant, guiding healthcare professionals in choosing the best solutions to meet their needs. This is a great opportunity to represent the full portfolio of KARL STORZ solutions we offer — from scopes and cameras to integration and instrumentation for all surgical specialties. This will cover Airway, Head & Neck, Surgical and Urology/Gynecology. Hired candidate should live in or near Lubbock, TX. The role covers a variety of call points including clinics, ORs, hospitals, and surgical centers. It’s a chance to work directly with surgeons and staff, bring real clinical value, and grow a territory with a lot of potential. What you’ll be doing: • Drive sales and exceed annual quotas within all four surgical specialties including minimally invasive surgical video imaging, operating room integration, and endoscopic instruments., • This full-line sales role will oversee the revenue generation for Urology/Gynecology, Surgical, Airway and Head & Neck., • Build and maintain strong relationships with key stakeholders, including physicians, nurses, and administrative personnel in advanced healthcare settings., • Actively pursue new business opportunities and expand market share., • Present product features and benefits effectively, ensuring customer satisfaction and long-term loyalty., • Stay informed about market trends and competitive products, providing valuable feedback to management., • Handle and transport medical equipment weighing 1-35lbs., • Spend at least 30 hours per week visiting geographically dispersed local customers in medical sites. What you need to be considered for the role: • Experience: 2-4 years of B2B sales experience (preferably medical devices)., • Education: Bachelor's degree or equivalent sales experience., • Skills: Strategic territory management, strong communication, and the ability to establish trust and credibility with key stakeholders to articulate KSUS’ value proposition through alignment of products/solution for better patient outcomes., • Travel: 30+ hours per week driving to customer sites, occasional domestic travel (up to 10%). Other Requirements: • Valid driver’s license is required for daily driving to geographically dispersed accounts., • Adhere to safety and quality standards, as this is a safety-sensitive role. Who we are: KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and operating room integration to benefit patients and healthcare providers alike. With more than 9,000 associates worldwide and 2,600 in the US, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support to help healthcare facilities succeed. With onsite locations and field opportunities across the country, we attract a diverse and talented staff. It's not just about the tools we create—it’s about the lives we change, together. #LI-MN1 , Pay: $112,000 plus Commission

Fusion Medical Staffing is seeking an experienced Medical Surgical Registered Nurse for an exciting Travel Nursing job in Lubbock, TX. Shift: Inquire Start Date: 11/30/2026 Duration: 13 weeks Pay: $1609 / Week Company: Fusion Medical Staffing Location: Facility in Lubbock, TX Job Details Fusion Medical Staffing is seeking a Med Surg RN for a 13-week travel assignment in Lubbock, TX. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent Med Surg RN experience, • Valid RN license in compliance with state regulations, • Current BLS (AHA/ARC) CertificationPreferred Qualifications:, • NIHSS certification, • ACLS (AHA/ARC) certification, • Other certifications and licenses may be required for this positionSummary: The Med Surg Registered Nurse delivers comprehensive high-quality, patient-centered care in medical-surgical and telemetry units. This role involves assessing patient health conditions, monitoring cardiac telemetry data, and collaborating with multidisciplinary teams to manage diverse patient needs. The position requires strong clinical skills in med-surg and telemetry nursing, critical thinking abilities, excellent communication, and a commitment to maintaining the highest standards of patient safety and professional ethics. Essential Work Functions: • Explain procedures and treatments to patients and families, addressing concerns and ensuring understanding, • Administer prescribed medications and treatments in adherence to nursing standards, • Conduct comprehensive assessments of patients’ conditions, documenting changes and reporting concerns to the care team, • Prepare patients for diagnostic procedures, assist physicians during treatments, and monitor patient responses, • Maintain a safe and comfortable environment for patients recovering from medical conditions or surgical procedures, • Document comprehensive patient information, including vital signs, medications, treatments, and care outcomes, in the medical record, • Collaborate with interdisciplinary teams, including physicians, physical therapists, and social workers, to create and implement individualized care plans, • Manage multiple patients efficiently, prioritizing care based on acuity and clinical needs, • Ensure infection control practices are strictly followed, including hand hygiene and PPE use, • Advocate for patients’ needs and preferences, ensuring they are respected and integrated into the care plan, • Facilitate discharge planning, coordinating with patients, families, and external resources to ensure a smooth transition from hospital to home, • Perform other duties as assigned within the scope of practice, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standardsRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support, • Reimbursement for licensure and CEUsWhy Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Med Surg RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing: Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and benefits that travelers deserve. At Fusion, you can seriously choose your own adventure! Fusion's purpose is to ensure that everyone we touch has a better life. We strive to be humble, driven and positive in all our actions! Specialty Fields: • Cardiopulmonary, • Cath Lab, • Home Health, • Laboratory, • Long Term care, • Nursing, • Radiology, • Therapy

Fusion Medical Staffing is seeking an experienced Stepdown Unit Registered Nurse for an exciting Travel Nursing job in Lubbock, TX. Shift: Inquire Start Date: ASAP Duration: 13 weeks Pay: $2002 / Week Company: Fusion Medical Staffing Location: Facility in Lubbock, TX Job Details Fusion Medical Staffing is seeking a skilled Stepdown RN for a 13-week travel assignment in Lubbock, TX. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent experience as a Stepdown RN, • Current Valid RN license in compliance with state regulations, • Current BLS Certification (AHA/ARC), • Current ACLS Certification (AHA/ARC)Preferred Qualifications:, • Progressive Care Certified Nurse (PCCN) Certification, • NIHSS Certification, • Other certifications and licenses may be required for this positionSummary: A Stepdown Registered Nurse provides care to patients who are transitioning from intensive care to medical-surgical or general inpatient units. These patients require frequent monitoring and specialized nursing interventions. They assess and manage complex patient needs, administer medications and treatments, and collaborate with multidisciplinary teams to ensure safe, patient-centered care. Essential Work Functions: • Monitors and interprets cardiac rhythms, vital signs, and other telemetry data to detect abnormalities and respond appropriately, • Administers prescribed medications and treatments in accordance with approved nursing techniques, with a focus on cardiac care, • Prepares equipment and aids physician during cardiac-related procedures and examinations, • Maintains awareness of comfort and safety needs of telemetry patients, • Observes patient, records significant conditions and reactions, and notifies supervisor or physician of patient's cardiac status and response to interventions, • Responds to life-saving situations based upon nursing standards, policies, procedures, and protocols specific to cardiac emergencies, • Documents nursing history and physical assessment for assigned telemetry patients, • Initiates patient education plans according to individualized needs, focusing on cardiac health, risk factors, and lifestyle modifications, • Collaborates with the interdisciplinary team to ensure comprehensive care for telemetry patients, • Maintains confidentiality of patients and client, • Performs other duties as assigned within the scope of practice, • Adheres to hospital safety protocols, infection control guidelines, and regulatory standardsRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support, • Reimbursement for licensure and CEUsWhy Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Stepdown RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing: Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and benefits that travelers deserve. At Fusion, you can seriously choose your own adventure! Fusion's purpose is to ensure that everyone we touch has a better life. We strive to be humble, driven and positive in all our actions! Specialty Fields: • Cardiopulmonary, • Cath Lab, • Home Health, • Laboratory, • Long Term care, • Nursing, • Radiology, • Therapy

Fusion Medical Staffing is seeking an experienced Intensive Care Unit Registered Nurse for an exciting Travel Nursing job in Lubbock, TX. Shift: Inquire Start Date: 11/16/2026 Duration: 13 weeks Pay: $1887 / Week Company: Fusion Medical Staffing Location: Facility in Lubbock, TX Job Details Fusion Medical Staffing is seeking a ICU RN for a 13-week travel assignment in Lubbock, TX. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent experience as an ICU RN, • Valid RN license in compliance with state regulations, • Current BLS (AHA/ARC) and ACLS (AHA/ARC) certificationsPreferred Qualifications:, • Critical Care Registered Nurse (CCRN) certification, • TNCC, NIHSS certification, • Other certifications or licenses may be required for this positionSummary: The ICU Registered Nurse is responsible for providing comprehensive, critical care to patients in the intensive care unit. This role encompasses assessing and monitoring critically ill patients, operating life-support equipment, administering advanced treatments, and collaborating with multidisciplinary healthcare teams. The position requires strong critical care skills, advanced clinical judgment, excellent communication, and a commitment to maintaining the highest standards of patient safety and professional ethics in high-acuity settings. Essential Work Functions: • Assess and monitor critically ill patients, recognizing and responding to subtle changes in patient condition, • Administer complex medications and treatments in accordance with approved critical care nursing techniques, • Operate and manage advanced life support equipment, • Ensure patient safety and comfort in high-acuity ICU environments, addressing physical and emotional needs, • Record significant conditions, reactions, and interventions, notifying the appropriate provider of changes in patient status, • Perform and interpret advanced hemodynamic monitoring, including arterial lines, central venous pressure, and pulmonary artery catheters, • Accurately document all assessments, interventions, and patient responses in the medical record in a timely manner to ensure continuity of care and compliance with regulatory standards, • Provide education to patients and families regarding the ICU environment, treatments, and recovery expectations, • Communicate closely with interdisciplinary healthcare teams to optimize patient care, • Maintain proficiency in critical care procedures and technologies through ongoing education and training, • Adhere to strict infection control protocols to protect immunocompromised patients and reduce risks, • Engage in quality improvement initiatives to enhance ICU patient outcomes and operational efficiency, • Perform other duties as assigned within scope, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standardsRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support, • Reimbursement for licensure and CEUsWhy Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel ICU RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing: Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and benefits that travelers deserve. At Fusion, you can seriously choose your own adventure! Fusion's purpose is to ensure that everyone we touch has a better life. We strive to be humble, driven and positive in all our actions! Specialty Fields: • Cardiopulmonary, • Cath Lab, • Home Health, • Laboratory, • Long Term care, • Nursing, • Radiology, • Therapy