Troubleshooting jobs in Hauppauge, New YorkCreate job alerts

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Master Electrician Shift: 3rd (11pm-7am) Pay: $44- $50.22/hr Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How you will impact WestRock: • Utilize electrical/mechanical skills to maintain machinery, • Contribute to a collaborative safety culture that drives results, • Provide rapid response to ensure seamless productivity. What you need to succeed: • 2-3 years in trouble shooting industrial electrical control systems down to component level, • An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase-power, communication devices, industrial / electronic controls, and power transmission systems., • A good understanding of hydraulic and pneumatic systems., • Able to install and set up both A/C and D/C drives, • PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude., • Must be able to read and interpret both electrical and mechanical drawings., • Working knowledge of power transmission equipment and bearings., • Basic welding skills preferred but not required., • Familiar with pumps, both air and electric., • Able to install and trouble shoot basic 3 phase motor control circuits, • Some knowledge of the various types of sensors and limit switches, • Familiar with computers and Microsoft software., • Strong written and verbal communication skills., • Ability to work independently in a mature and professional manner., • Ability to work flexible hours, overtime, • High school diploma or equivalent Military training and or Technical School preferred What we offer: • Comprehensive benefits package- including but not limited to medical, dental, vision, 401K, and short-term disability coverage., • Corporate culture based on integrity, respect, accountability, and excellence, • Comprehensive training with numerous learning and development opportunities, • A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work., • The starting range is $44/hr - $50.22hr, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ___ and the application window is expected to close by December 21 2025. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Job Description Overview: Our client is seeking a highly skilled Full Charge Bookkeeper with hands-on experience in Microsoft Business Central. This role is responsible for end-to-end bookkeeping functions, supporting accurate financial records and seamless accounting operations. Key Responsibilities: • Manage the full cycle of accounting duties including accounts payable, accounts receivable, payroll, and bank reconciliations., • Prepare monthly, quarterly, and annual financial statements and reports., • Oversee general ledger entries and ensure proper documentation and classification., • Reconcile bank and credit card statements, maintaining accuracy and resolving discrepancies., • Process invoices, payments, journal entries, and expense reports., • Manage month-end and year-end close procedures., • Collaborate with outside CPAs or auditors to assist with annual audit processes., • Maintain organized records and financial documentation in accordance with company policies and compliance standards., • Utilize Microsoft Business Central for daily bookkeeping operations, including setup, reporting, and troubleshooting issues., • Identify and implement improvements to accounting workflows using Business Central functionality., • Support management with financial analysis, budgeting, and forecasting as requested. Required Qualifications: • Proven experience as a Full Charge Bookkeeper or in a similar accounting role., • Proficiency with Microsoft Business Central; able to navigate modules, generate reports, and troubleshoot errors., • Strong knowledge of accounting principles and best practices., • Excellent attention to detail, organization, and problem-solving skills., • Advanced proficiency with spreadsheets and accounting software., • Ability to manage multiple tasks and meet deadlines., • Effective written and verbal communication skills.

LabCare Latham is seeking a full time Evening Lab Supervisor to join their team! This is a full time 40-hour work week, 11:30am-8:00pm. \n The Evening Clinical Laboratory Supervisor assists the Laboratory Manager in coordinating laboratory activities to ensure accurate, timely, and cost-effective testing of patient samples. This position supports quality management systems, maintains compliance with all state and federal regulations, and provides supervision and technical support to evening laboratory staff. Responsible for ordering and maintaining all laboratory supplies. \n Responsibilities: \n Include but are not limited to the following: \n\n • Assists with scheduling, training, and competency assessments of laboratory staff.\n, • Participates in hiring, performance reviews, and disciplinary action as appropriate.\n, • Ensures proper collection, processing, and testing of all specimens per established protocols.\n, • Oversees Quality Control, Quality Assurance, and Proficiency Testing programs.\n, • Ensures Standard Operating Procedure Manuals (SOPMs) are current and signed off.\n, • Performs laboratory testing in chemistry, hematology, urinalysis, and immunology.\n, • Maintains detailed records of procedure performance, patient results, troubleshooting logs, and quality control.\n, • Reviews and verifies laboratory reports for accuracy and completeness before release.\n, • Notifies physicians and nurses of “red flag” or critical results per established policies.\n, • Maintains equipment and supply inventory; performs and documents preventive and corrective maintenance.\n, • Troubleshoots instrumentation issues and coordinates vendor service when necessary.\n, • Ensures compliance with all safety, infection control, and OSHA standards.\n, • Maintains a safe and clean work area, properly handling and disposing of biohazardous materials.\n, • Participates in continuing education and maintains documentation per NYS requirements.\n, • Builds a positive rapport within the organization and throughout the laboratory community.\n, • Oversees LIS communications and technical functions related to laboratory operations.\n

Job Description Are you looking for a new job or a company that aligns with your values and passions? Join Paraco, a family-owned company that has been delivering clean energy and fueling life's moments for over 50 years. We take pride in being one of the largest privately-owned propane companies in the Northeast, serving eight states. In addition, we're expanding our services to include total home comfort through Paraco HVAC, offering alternative energy and energy storage systems. Discover more about our careers by visiting Paraco Careers. Join us on this exciting journey toward a sustainable future. Position Summary: Our Bobtail Delivery Driver is responsible for delivering various types of propane cylinders for both residential and commercial customers. You will also provide outstanding customer service and adhere to industry safety standards. Key responsibilities and essential job functions include, but are not limited to: • Provide daily safe, punctual, consistent, and reliable bulk and cylinder deliveries daily, • Participate in and complete all required industry compliance and company training, • Provide consistent, courteous, and efficient customer service, • Perform daily vehicle and trailer inspections, • You will be working outdoors in all weather and driving conditions., • Ability to lift and carry over 55 pounds regularly throughout the day and bend, climb, reach, & rotate as needed, • High School Diploma or GED equivalent, • 1+ years of Class A or B CDL experience, • Valid CDL license with Hazardous Materials (H) and Tank Vehicle (N) endorsements or (X) combination. The license may not contain any Air Brakes (L) or (Z) Restriction(s), • Current DOT Medical Card, • Crane experience., • Experience with hand tools, power tools, and test equipment, • Basic troubleshooting, problem-solving, and diagnostic skills, • Previous Bobtail delivery of propane, fuel oil, or other hazardous materials, • Being a strong team player with excellent communication and interpersonal skills is essential, • Detailed-oriented self-starter with the ability to multi-task in a fast-paced environment Benefits We Provide: • Medical Insurance-HDHP, HSA, FSA, • Dental, • Vision, • Voluntary Benefits-Life Lock, Life Insurance (Whole and Term), Hospital & Accident Plans, • Company Paid Short Term Disability, Basic Life & AD&D Insurance (Up to $200,000 per plan), • 401(k) w/ Company Match (75% of the first 5% deferred), • Paid PTO and Sick, • Paid Holidays Paraco Gas Corporation is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, sex, age (40 or over), national origin, ancestry, physical or mental disability, military or veteran status, marital status, medical condition, gender (including gender identity, gender expression, sexual orientation, registered domestic status, pregnancy, childbirth and related medical conditions), genetic characteristics, religion or any other classification protected by state or federal law.

Job Description Position Summary: The Bulk Are you looking for a new job or a company that aligns with your values and passions? Join Paraco, a family-owned company that has been delivering clean energy and fueling life's moments for over 50 years. We take pride in being one of the largest privately-owned propane companies in the Northeast, serving eight states. In addition, we're expanding our services to include total home comfort through Paraco HVAC, offering alternative energy and energy storage systems. Discover more about our careers by visiting Paraco Careers. Join us on this exciting journey toward a sustainable future. Weekly Pay-Great Benefits! Our Propane-Cylinder Delivery Driver is responsible for delivering various types of propane cylinders to both residential and commercial customers. You will also provide outstanding customer service and adhere to industry safety standards. Key responsibilities and essential job functions include, but are not limited to: • Provide daily safe, punctual, consistent, and reliable bulk and cylinder deliveries daily, • Participate in and complete all required industry compliance and company training, • Provide consistent, courteous, and efficient customer service, • Perform daily vehicle and trailer inspections, • You will be working outdoors in all weather and driving conditions., • High School Diploma or GED equivalent, • 1+ years of Class A or B CDL experience, • Valid CDL license with Hazardous Materials (H) and Tank Vehicle (N) endorsements or (X) combination. The license may not contain any Air Brakes (L) or (Z) Restriction(s), • Current DOT Medical Card, • Crane experience., • Experience with hand tools, power tools, and test equipment, • Basic troubleshooting, problem-solving, and diagnostic skills, • Previous Bobtail delivery of propane, fuel oil, or other hazardous materials, • Being a strong team player with excellent communication and interpersonal skills is essential, • Medical Insurance-PPO, EPO, HDHP, HSA, FSA, LFSA, • Dental, • Vision, • Voluntary Benefits-Life Lock, Life Insurance (Whole and Term), Hospital & Accident Plans, • Company Paid Short Term Disability, Basic Life & AD&D Insurance (Up to $200,000 per plan), • 401(k) w/ Company Match (75% of the first 5% deferred), • Paid PTO and Sick

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Health insurance, • Paid time off Position Overview: A leading candle manufacturing plant in Sayville, NY, is seeking a motivated, reliable, and energetic mechanic to join our team. The ideal candidate will have a strong mechanical aptitude and hands-on experience with electrical, pneumatic, and hydraulic systems. In this role, you will be responsible for: • Performing daily machine setup, adjustments, and repairs on production equipment., • Conducting preventative maintenance to ensure optimal machine performance and minimize downtime., • Troubleshooting mechanical and electrical issues to ensure efficient production., • Reviewing and maintaining machine safety features for compliance and operational efficiency. Qualifications & Requirements: • High School Diploma or equivalent required., • Minimum of 3 years of experience in a related mechanical role., • Proficiency in electrical, pneumatic, hydraulic, and mechanical systems., • Strong troubleshooting skills and ability to work with hand and power tools., • Dependable, well-organized, and a quick learner., • Must be a team player with excellent communication skills., • Valid driver's license and reliable transportation required., • Must be able to work day shift: 7:30 AM 4:00 PM (weekends as needed). What We Offer: • Competitive salary based on experience., • Health insurance, 401(k), and other benefits., • Full-time, stable career opportunity with growth potential. How to Apply: If you meet the qualifications and are interested in this opportunity, please submit your resume along with salary requirements for consideration.

Requirements: • Master’s or Bachelor’s degree in Pharmaceutical Engineering, Pharmaceutical Sciences, or a related field of study from an accredited college/university required., • One (1) to three (3) years of direct work experience in pharmaceutical manufacturing. Preference will be given to candidates with experience in generic pharmaceutical manufacturing., • Understanding and insight into the product, quality, and safety requirements., • Capable of conducting troubleshooting, investigations, and root cause identification and analysis., • Capable of handling and participating in compliance and regulatory audits at the local and federal levels., • Must be proficient in computer skills and software applications such as Microsoft Office tools., • Experience using the SAP business system and applications is a plus.

Job Description Customer Service Representative Job Title: Customer Service Representative (CSR) Department: Customer Service Reports To: Customer Service Manager The Opportunity The Customer Service Representative (CSR) is an essential, customer-facing role focused on delivering exceptional service and fostering strong relationships within our specialized printed packaging sector. You will be proactive, highly detail-oriented, and adept at managing a dedicated portfolio of key accounts. You are responsible for building strong rapport through effective communication to deliver on the customer’s precise printed packaging needs. Job Summary The CSR acts as the primary customer liaison, managing the end-to-end customer journey from initial inquiry and order placement through final delivery. This role requires seamless coordination across internal production, logistics, and quality teams to ensure a consistently excellent customer experience. Key Responsibilities Customer Support & Order Management • Serve as the main communication point via phone, email, and online channels, providing knowledgeable product and service support., • Manage the comprehensive order lifecycle, including accurate entry, confirmation, art file inspection, plate ordering, and tracking updates., • Proactively manage and communicate changes, special requests, and potential delays efficiently and professionally., • Liaise closely with Production, Scheduling, and Shipping departments to guarantee timely order fulfillment and reliable on-time delivery commitments., • Monitor material and finished goods inventory levels, advising customers on accurate lead times and product availability., • Promptly handle and process customer complaints, returns, and quality concerns, collaborating with the Quality Control team., • Assist in troubleshooting complex printing, material, or packaging issues in collaboration with technical experts., • Maintain detailed and accurate records of all customer interactions, orders, and issues within the CRM system. Required Qualifications • Previous experience in Customer Service, Order Management, or Sales Support, preferably within a fast-paced environment., • Demonstrated experience in a manufacturing, printing, or flexible packaging industry is highly desirable., • Exceptional written and verbal communication and interpersonal skills, with a proven ability to cultivate positive customer relationships., • Superior organizational ability and detail-orientation, capable of successful multitasking., • Proficiency with Microsoft Office Suite, Adobe Acrobat, and CRM systems., • In-depth knowledge of flexible packaging materials, printing processes, and standard industry lead times., • Experience with specialized order processing or Enterprise Resource Planning (ERP) software., • Office-based role., • We offer a competitive compensation package and comprehensive benefits, including health insurance, Paid Time Off (PTO), and a 401(k) retirement plan., • Excellent opportunities for professional development and career advancement within the company.

Be part of the future! We are committed to making a difference. What you will do: Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctions. Responsible to contact customer representative and ascertain equipment/systems problems. Diagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sites. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service. How you will do it: • Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment, • Service, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnell, • Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals, • Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction, • Complete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computers, • Adhere to safety regulations put forth by JCI, • Obtain customer signature upon completed service call assignment, • Participate in a scheduled On-call rotation, • Help to train or mentor others on the service team, • Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities, • Provide quotes to support recommendations and solutions., • Perform other duties as assigned What we look for: Required • NICET I Certification for Fire Alarm Systems is required, • Three years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems, • Experience in reading and interpreting blueprints, submittals, and operational/product manuals, • Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices, • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs., • Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Ability to work flexible hours including weekends to meet customer requirements, • Overnight travel may be required, • Demonstrate a high level of customer service, • Maintain truck inventory to ensure timely response to customer needs, • Ability to adhere to, implement, and always follow safety guidelines and procedures, • Strong organizational skills, positive attitude, and an ability to learn quickly, • Possess a valid driver’s license and driving record that meets company requirements, • Able to pass a pre-employment background and drug test Preferred • NICET Level II certification What we offer: • Competitive Starting Pay, • Paid Training, • Tuition reimbursement, • Global Advancement Opportunities, • Company Vehicle (as applicable), • Referral Bonuses, • Comprehensive Benefits, • Medical/Dental/Vision insurance, • Health Savings Account (HSA), • Life Insurance, • 401(k) savings plan with company match, • Short-Term and Long-Term Disability, • Employee Assistance Program, • Wellness Program, • And more! #TechHiring HIRING HOURLY RANGE: $20.67- 25.48 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: • Competitive Starting Pay, • Paid Training, • Tuition reimbursement, • Global Advancement Opportunities, • Company Vehicle (as applicable), • Referral Bonuses, • Comprehensive Benefits, • Medical/Dental/Vision insurance, • Health Savings Account (HSA), • Life Insurance, • 401(k) savings plan with company match, • Short-Term and Long-Term Disability, • Employee Assistance Program, • Wellness Program, • And more! What you will do: Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctions. Responsible to contact customer representative and ascertain equipment/systems problems. Diagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sites. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service. How you will do it: • Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment, • Service, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnell, • Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals, • Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction, • Complete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computers, • Adhere to safety regulations put forth by JCI, • Obtain customer signature upon completed service call assignment, • Participate in a scheduled On-call rotation, • Help to train or mentor others on the service team, • Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities, • Provide quotes to support recommendations and solutions., • Perform other duties as assigned What we look for: Required • NICET I Certification for Fire Alarm Systems is REQUIRED, • 3+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems, • Experience in reading and interpreting blueprints, submittals, and operational/product manuals, • Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices, • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs., • Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc, • Ability to work flexible hours including weekends to meet customer requirements, • Overnight travel may be required, • Demonstrate a high level of customer service, • Maintain truck inventory to ensure timely response to customer needs, • Ability to adhere to, implement, and always follow safety guidelines and procedures, • Strong organizational skills, positive attitude, and an ability to learn quickly, • Possess a valid driver’s license and driving record that meets company requirements, • Able to pass a pre-employment background and drug test Preferred • NICET Level II certification HIRING HOURLY RANGE: $20.67-25.48 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ #TechHiring

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 114,000 colleagues serve people in more than 160 countries. Working at Abbott At Abbott, you can do work that matters, grow, and learn, care for yourself and your family, be your true self, and live a full life. You’ll also have access to: • Career development with an international company where you can grow the career you dream of., • Employees can qualify for free medical coverage in our Health Investment Plan (HIP) PPO medical plan in the next calendar year., • An excellent retirement savings plan with a high employer contribution, • Tuition reimbursement, the ___ student debt program, and ___ education benefit - an affordable and convenient path to getting a bachelor’s degree., • A company recognized as a great place to work in dozens of countries worldwide and named one of the most admired companies in the world by Fortune., • A company that is recognized as one of the best big companies to work for as well as the best place to work for diversity, working mothers, female executives, and scientists. The Opportunity The Clinical Specialist provides clinical and sales support through education of current and potential customers, and procedure coverage with a defined region. In this role, the Clinical Specialist with train interventional cardiologists, catheter lab staff and ancillary personnel on the use of Structural Heart products and provide technical support to physicians during procedures. The role is responsible for communicating product, clinical and market data to appropriate personnel and will support the company’s efforts to develop and implement product marketing strategies. This position may be hired at different level, depending on the experience of the candidate. This position may travel in excess of 50%. What You’ll Work On * Collaborate with Territory Managers to provide good case coverage and clinical outcomes for patients * Serve as primary resource for clinical support in the areas of surgical coverage, troubleshooting and in-service education for company products * Educate customer on the merits and proper clinical usage of company products. Inform customers of the latest product, therapy and technology developments in the industry. * Actively engage in clinical, procedural and technical discussions and link data outcome to key messaging. * Meet with existing and potential clients (health care providers) to identify their clinical needs, goals and constraints related to patient care and provide creative and feasible solutions. * This role requires a strong clinical orientation with the ability to influence a variety of clinician personality types. Required Qualifications * BS/BA or equivalent experience required. * 2-5+ years of related cardiovascular work experience required. • Verification that you will satisfy all vendor credentialing requirements, which may include vaccination for COVID-19. If you require a medical or religious accommodation from these requirements or if you would like to understand more about these requirements, please advise HR so that we can provide additional information and if needed, we can explore any needed accommodation(s). Preferred Qualifications * Degree in life sciences or medical training (RN, EMT, Perfusion, etc.) preferred. * Strong clinical orientation, experience with products for use in interventional cardiology and cardiac surgery, familiarity with echo cardiology and other indirect imaging, also strongly preferred. * Strong consideration will be given to candidates with EP (Electrophysiology) and SH (Structural Heart) sales experience. Learn more about our health and wellness benefits, which provide the security to help you and your family live full lives: ___ Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity. Connect with us at ___, on Facebook at ___, and on Twitter @AbbottNews. The base pay for this position is $66,700.00 – $133,300.00. In specific locations, the pay range may vary from the range posted.

Job Description Duro Dyne National Corporation is seeking dynamic individuals to become part of our winning team. If you are a highly motivated, team player who is interested in an exciting career with a global leading manufacturer then this job is for you! Established in 1952, the Duro Dyne National Corporation, has evolved into the leading manufacturer of sheet metal accessories and equipment for the HVAC industry. For over 70 years, Duro Dyne has expanded its plant locations and now employs over 200 people. Duro Dyne National Corporation is committed to providing superior quality and unparalleled dedication to all aspects of our business. We believe every employee contributes to the success and growth of our company. As an employee at Duro Dyne, you reap the benefits of being part of an expanding company that still maintains a progressive employee culture and atmosphere. The Dynomate Machine Operators primary function is to ensure the setup, operation, troubleshooting and maintenance of machinery. Job Duties: • Record accurate daily production while maintaining production quotas., • Ensuring the inspection of the quality of the product during daily production., • Perform minor adjustments of the roll-forming machine as needed., • Ensure proper markings are affixed to the product fabric., • Ensure product is packaged in the appropriate carton and labels are affixed., • Ensure finished packaged product is placed on skids., • Ensure presses and dies are lubricated when required., • Maintain work area clean and free of debris., • Ensure the recording of scrap., • Load any and all raw material as needed., • Notify the supervisor when a machine is not working properly., • Reporting incidents, faulty operations, or product imperfections., • Assist with annual physical inventory., • Must be able to read/write in English., • Must be flexible – OT and weekends are required as needed., • Must be able to work a 10 hour/day schedule., • Work independently and as part of a team., • Must be able to work in a fast-paced environment., • Must be in good physical condition., • Must be able to lift up to 50 lbs., • Must have good hand/eye coordination., • 401(k), • 401(k) Matching, • Health/Dental/Vision insurance, • Flexible Spending Account, • Dependent Spending Account, • Company Paid Life Insurance & AD&D, • Short & Long Term Disability, • Paid Time Off & Paid Holidays, • Referral Program Duro Dyne National Corporation is proud to be an EEO employer M/F/D/V. The Duro Dyne National Corporation is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Job Type: Full-time Salary: $16/hour-$19/hour The listed salary/wage range may vary based on experience, skills, and qualifications, is not guaranteed, and may periodically be adjusted. Benefits: NSI Industries offers a competitive salary, performance-based and attendance bonuses for certain roles. We offer health, dental, and vision insurance. Retirement savings plan with company match. Paid holiday time off and vacation. EEO employer M/F/D/V: NSI Industries is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Reasonable Accommodation: NSI Industries is committed to providing reasonable accommodation for qualified individuals with disabilities. If you require assistance or accommodation during the application process, please contact your Recruiter for assistance. We comply with federal and state disability laws and make reasonable accommodation for applicants and employees with disabilities to ensure equal employment opportunities. Physical Work Requirements: Many roles at NSI Industries require physical activities where the employee must occasionally lift and/or move items or require specific vision abilities. Drug Free Workplace: NSI Industries maintains a drug-free workplace and requires all employees to complete and pass a pre-employment drug screen and background check. Powered by JazzHR R6EPpFZfYK

Job DescriptionDuro Dyne National Corporation is seeking dynamic individuals to become part of our winning team. If you are a highly motivated, team player who is interested in an exciting career with a global leading manufacturer then this job is for you! Established in 1952, the Duro Dyne National Corporation, has evolved into the leading manufacturer of sheet metal accessories and equipment for the HVAC industry. For over 70 years, Duro Dyne has expanded its plant locations and now employs over 200 people. Duro Dyne National Corporation is committed to providing superior quality and unparalleled dedication to all aspects of our business. We believe every employee contributes to the success and growth of our company. As an employee at Duro Dyne, you reap the benefits of being part of an expanding company that still maintains a progressive employee culture and atmosphere. The Dynomate Machine Operators primary function is to ensure the setup, operation, troubleshooting and maintenance of machinery. Job Duties: • Record accurate daily production while maintaining production quotas., • Ensuring the inspection of the quality of the product during daily production., • Perform minor adjustments of the roll-forming machine as needed., • Ensure proper markings are affixed to the product fabric., • Ensure product is packaged in the appropriate carton and labels are affixed., • Ensure finished packaged product is placed on skids., • Ensure presses and dies are lubricated when required., • Maintain work area clean and free of debris., • Ensure the recording of scrap., • Load any and all raw material as needed., • Notify the supervisor when a machine is not working properly., • Reporting incidents, faulty operations, or product imperfections., • Assist with annual physical inventory., • Must be able to read/write in English., • Must be flexible – OT and weekends are required as needed., • Must be able to work a 10 hour/day schedule., • Work independently and as part of a team., • Must be able to work in a fast-paced environment., • Must be in good physical condition., • Must be able to lift up to 50 lbs., • Must have good hand/eye coordination., • 401(k), • 401(k) Matching, • Health/Dental/Vision insurance, • Flexible Spending Account, • Dependent Spending Account, • Company Paid Life Insurance & AD&D, • Short & Long Term Disability, • Paid Time Off & Paid Holidays, • Referral Program, • Company BBQs and other team eventsDuro Dyne National Corporation maintains a drug-free workplace and requires all employees to complete and pass a pre-employment drug screen and background check. Duro Dyne National Corporation is proud to be an EEO employer M/F/D/V. The Duro Dyne National Corporation is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Job Type: Full-time Salary: $16/hour-$19/hour Benefits: NSI Industries offers a competitive salary, performance-based and attendance bonuses for certain roles. We offer health, dental, and vision insurance. Retirement savings plan with company match. Paid holiday time off and vacation. EEO employer M/F/D/V: NSI Industries is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Reasonable Accommodation: NSI Industries is committed to providing reasonable accommodation for qualified individuals with disabilities. If you require assistance or accommodation during the application process, please contact your Recruiter for assistance. We comply with federal and state disability laws and make reasonable accommodation for applicants and employees with disabilities to ensure equal employment opportunities. Physical Work Requirements: Many roles at NSI Industries require physical activities where the employee must occasionally lift and/or move items or require specific vision abilities. Drug Free Workplace: NSI Industries maintains a drug-free workplace and requires all employees to complete and pass a pre-employment drug screen and background check. Powered by JazzHR 5VoGDhtQ76

GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY, is seeking a Manufacturing Engineer in the Engineering Department who is organized, detail oriented and possesses strong interpersonal skills. \n Summary: \n The Manufacturing Engineer will be responsible for evaluating, designing, and implementing efficient production methods and processes. The role focuses on improving operational efficiency, quality control, and overall productivity. The successful candidate will work closely with design, production, and quality teams to ensure the most effective and innovative production strategies are applied. \n Reports to: Director of Manufacturing Planning \n Duties include: \n\n • Analyze and design efficient production processes for manufacturing systems.\n, • Develop and implement process improvements to reduce production time, cost, and waste.\n, • Create and maintain process documentation, including work instructions, procedures, and flowcharts.\n, • Collaborate with the engineering and production teams to ensure proper integration of new methods into existing systems.\n, • Conduct time studies, process optimization, and line balancing to enhance productivity.\n, • Identify potential issues or bottlenecks in production and propose corrective actions.\n, • Develop and support the introduction of new tools, technologies, and equipment to improve production processes.\n, • Ensure compliance with industry standards, safety regulations, and quality requirements.\n, • Assist in the design and layout of production lines, workstations, and facilities.\n, • Conduct root cause analysis for problems related to manufacturing efficiency or quality.\n, • Provide training and support to operators and production staff on new methods or procedures.\n, • Monitor and report on key performance indicators (KPIs) related to production efficiency, cost reduction, and product quality.\n, • Proven experience in a manufacturing or production environment, ideally as a Methods Engineer or in a similar role.\n, • Strong understanding of production processes, lean manufacturing principles, and process improvement techniques (such as Six Sigma, Kaizen, etc.).\n, • Experience with process mapping, time studies, and work measurement.\n, • Proficient in using CAD software, manufacturing simulation tools, and ERP systems.\n, • Excellent problem-solving, analytical, and troubleshooting skills.\n, • Strong communication and teamwork abilities.\n, • Experience in aerospace and defense industry\n, • Certification in Lean Manufacturing, Six Sigma, or other process improvement methodologies.\n, • Process Improvement, Production Systems Design, Manufacturing Technologies\n, • CAD and Simulation Tools, ERP Systems, Problem Solving, Data Analysis, \n, • Project Planning, Budgeting and Cost Management and Cross Functional Collaboration\n

Job DescriptionDescription: Position Summary: Develop stability-indicating methods. Design and conduct routine laboratory analysis using various analytical instruments and software such as HPLC, UPLC, ICP, and UV-Vis. Responsibilities: Responsibilities include, but are not limited to: • Knowledge of USP and FDA requirements., • Develop stability-indicating methods for Active Pharmaceutical Ingredients (API) and Dietary Supplement products., • Generate method validation protocols., • Execute methods validation and methods transfer., • Generate method validation reports and analytical methods., • Design and conduct full analysis of Dietary supplements and Active Pharmaceutical Ingredients (API) products and their impurities., • Conduct assay, content uniformity, dissolution, in-process blend, and blend uniformity of newly developed and stability samples in support of formulation and process development., • Prepare result documentation for department and general review., • Identify and resolve problems with analytical methods and provide troubleshooting on instrumentation., • Conduct Performance Qualification (PQ) on various instruments., • Provide leadership, guidance and hands-on training to new employee and provide technical support to other departments., • Effectively communicate information in concise reports., • Bachelor’s degree in chemistry or analytical chemistry with 4-5 years of pharmaceutical experience OR, • Instrumentation: HPLC, UPLC, ICP, GC, FT-IR, UV, Dissolution, pH, TOC and Karl Fischer., • Hours/Travel maybe subject to changed based on management/company discretion., • Work location are subject to change as needed to meet business requirements. $70,000 - $90,000 per year

Job Description Vacuum Instruments Corporation is one of the world’s largest companies devoted solely to the research, design, manufacture, distribution, and service of leak detectors, gas handling equipment, and complete leak detection solutions. VIC is the only company in North America to offer both organically manufactured instruments and custom systems for tracer gas and air leak tests as well as gas management. VIC’s staff of engineers, system design personnel and applications specialists constitute the most experienced body of leak detection experts in the world. Vacuum Instruments Corporation (VIC) offers an unparalleled breadth of application knowledge and gas handling experience along with the fastest, simplest, and most robust leak detectors in the industry. Billions of products have been tested with VIC complete turnkey leak detection solutions, portable vacuum-type helium sniffers, general purpose helium leak detectors, as well as mass flow and pressure decay systems. We are looking for a Class B Machinist for our Ronkonkoma facility. Must live in Long lsland, NY. This role is under limited supervision. You will perform basic and intricate manufactured parts using Manual Milling and Lathe machining. Also, some computerized machining operations to fabricate parts for a wide variety of systems. • Required: Knowledge and experience in manual machining 2-3 years of previous experience., • Maintains specifications by observing all operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Maintains safe operations by adhering to safety procedures and regulations., • Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs., • Conceptual skills, functional and technical skills, tooling, strong attention to detail, and solid judgment, • Basic math, geometry, and trigonometry, • Minimum 2-3 years of prior experience as a Manual Machinist.

Job Description Software Developer (C#/.NET) - Long Island, NY ONSITE WORK REQUIRED Schultheis & Panettieri, LLP has a full time opening for a mid-level .Net Programmer/Developer. We are currently recruiting an energetic, detailed-oriented, and motivated Software Developer with in-depth knowledge of C# .NET. This person will be developing desktop and web-based software products that will encompass heavy front-end and back-end development. We are looking for someone who is self-directing, loves learning, and enjoys collaborating on tough challenges. Responsibilities • Responsible for writing the code (or modules) independently for in-house applications., • Carry out the debugging and troubleshooting of all programs., • Develop applications based on functional specifications., • Identify and communicate technical problems/solutions., • Create basic user manuals to be used by the end users., • Works well in a team., • Solves problems effectively., • Performs well under stress., • Great attention to detail., • Good math skills., • Excellent communication skills., • Creative thinker., • Adapt to a variety of situations., • Solid understanding of Object-Oriented Programming (OOP)., • Minimum 3-5 years application development and integration experience using Microsoft technologies (e.g., C#,.Net Core, WinForms, LINQ, SQL Server, T-SQL, Visual Studio)., • SAP Crystal Reports experience., • Working knowledge of Telerik Controls for .Net applications., • Experience with source control tools like TFS and Azure DevOps., • Strong business analysis/needs assessment skills; must be comfortable and effective working directly with end users., • Strong customer service skills; able to resolve requests professionally and effectively in a high volume and fast paced environment, while interacting with other IT Department staff, business users, and senior management. Please submit salary requirements to be considered. If you love to code and have strong supporting skills, we'd love to hear from you! We provide an excellent work environment and excellent benefits. Benefits • Medical, • Pension, • 401(k), • Life Insurance, • Long Term Disability Insurance, • Flexible Spending, • Voluntary Dental, • Voluntary Vision, • Sick Days, • Vacation, • Flexible schedule

Job DescriptionSalary: $38k-$58k Quailfications: • Assembling, evaluating, and testing of switching power supplies up to 1KW., • Knowledge and experience of using electronic measurement equipment such as Oscilloscopes, DVM, Spectrum Analyzers, Thermal chambers, and wattmeters., • Troubleshooting and repairing of switching power supplies from production or from the field., • Constructing and fabricating metal or plastic parts, using hand tools and specifications., • Reading and interpreting electrical and electronic circuit schematics., • Advising engineers on problems and offering solutions. Education Requirements: • Minimum 2 year technical degree in electronic technology Benefits: • 401(k) matching, • FSA Accounts, • Dental insurance, • Health insurance, • Vision insurance, • Life insurance, • Paid time off

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $130,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: We are seeking an experienced Senior Verification Engineer to join our Engineering team. The successful candidate will play a key role in ensuring the functionality, performance, and reliability of FPGA-based designs through a comprehensive verification and validation processes. This position involves developing robust testbenches, creating advanced simulation environments, executing verification suites, and collaborating closely with Design Engineers to achieve first-pass success for FPGA implementations. Key Position Accountabilities: • Design and Development: Develop and implement verification plans, test strategies, and methodologies for complex FPGA-based systems., • Verification and Validation: Execute comprehensive verification processes, including simulation, testbench creation, requirement-based validation and verification per accepted safety standards, and regression testing to ensure design correctness and performance., • Collaboration: Partner with system architects, hardware engineers, and software developers to define requirements and deliver integrated solutions., • Troubleshooting: Diagnose, debug, and resolve FPGA-related issues, including hardware/software interaction challenges and performance optimizations., • Documentation: Prepare and maintain detailed documentation of verification processes, design methodologies, and test results to support traceability and knowledge sharing., • Mentorship: Provide technical guidance, mentorship, and best practices to junior engineers in FPGA design, verification, and validation techniques., • Planning: Develop project schedules, identify resource requirements, and support product development from concept through release., • Education: Bachelor’s or Master’s degree in Electrical or Computer Engineering (or related field)., • Experience: 8–15 years of hands-on experience in FPGA verification and development of complex digital systems, utilizing advanced verification techniques and methodologies., • HDL language & Verification Frameworks: Expertise in VHDL; working knowledge of Verilog, SystemVerilog and UVM for function verification., • FPGA Design Tools: Proficiency in Xilinx Vivado required; familiarity with Intel Quartus and Lattice Diamond is desirable., • Simulation & Debug tools: Experience using ModelSim/Questa and Xilinx Integrated Logic Analyzer (ILA)., • Technical Expertise: Solid understanding of FPGA architectures, digital design principles, and high-speed design techniques., • Protocols: Hands on experience with PCIe, 1G/10G Ethernet, and Time-Sensitive Networking (TSN)., • Problem-Solving: Strong analytical and debugging skills with meticulous attention to detail., • Communication: Excellent verbal and written communication skills, with the ability to collaborate effectively across multidisciplinary teams., • Experience with embedded systems and software development., • Familiarity with hardware/software co-design and system integration. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Pyou is the international identity of Lavoropiù, one of the most famous Italian companies operating in recruitment and human resources consultancy. We offer international R&S services thanks to local subsidiaries and international recruiting teams. Today Pyou Global presents you with a new vacancy: for the US branch (Hauppauge, Long Island - NY) of a prestigious Italian company - a global leader in coating and laminating industrial machinery - we are looking for a: SAT TECHNICIAN — AFTER SALES / FIELD SERVICE The ideal candidate is a technically strong, hands-on field service technician with solid electrical/electronic skills, experience on industrial machinery (packaging/coating/laminating), and the flexibility to spend most of the time on customer sites across North America. We are looking for a reliable professional ready to work in a compact, international team and to represent a premium Italian client in front of customers. The resource will be responsible for: • Testing and commissioning machinery at customer sites across USA, Canada and Mexico., • Providing post-sales technical assistance and troubleshooting (on-site in the customer plants and remote from NY company's office)., • Diagnosing electrical/electronic/pneumatic faults and interpreting technical schematics., • Working with Siemens PLC/HMI systems (STEP 7, TIA Portal) and Siemens drives., • Performing preventive maintenance, adjustments and preparing detailed service reports., • Training customers and collaborating with the service team for escalations. Key Requirements: • Technical diploma in Electronics, Automation, Mechatronics or similar., • 3-5 years of experience in field service on industrial machinery (packaging/coating/laminating preferred)., • Strong skills with Siemens PLC/HMI (STEP 7, TIA Portal) and good electromechanical troubleshooting abilities., • Ability to read electrical/pneumatic schematics; proficiency with diagnostic tools., • Availability to travel 60–70% across USA/Canada/Mexico; valid passport and US work authorization., • Customer-oriented, fluent in English (Spanish is a plus), with a clean driving record. What We Offer: • Competitive annual gross salary depending on experience., • Permanet contract., • Company-paid travel, per-diem or travel allowance and coverage of accommodation expenses while on assignment., • Comprehensive on-the-job training and shadowing with senior service engineers and Branch Manager., • Company tools and support for field service (laptop, diagnostic tools, access to spare parts)., • Opportunity to work for a prestigious Italian industrial group and to grow in an international technical career. Workplace: Hauppauge, Long Island (New York - USA) Lavoropiù S.p.A. - Aut. Min. 1104 - SG dated 26/11/2004. This job post is addressed to both sexes, pursuant to laws 903/77 and 125/91, and to people of all ages and nationalities, pursuant to legislative decrees 215/03 and 216/03. We kindly ask you to read through our privacy policy, available at the link ___ and to include in your CV the authorization to process your personal data in accordance with EU Regulation no. 679/2016 and with the Italian legislation in force. Please do not enter data belonging to particular categories (data revealing racial or ethnic origins, political opinions, religious or philosophical convictions, or union membership, genetic data, biometric data intended to uniquely identify a natural person, data related to health or sex life or sexual orientation; EU Regulation No. 679 of 2016).

Job Description Job Title: Construction Electrical Worker Company: Integrated Wireless Technologies Location: Holbrook, NY Employment Type: Full-time About Integrated Wireless Technologies: Integrated Wireless Technologies is a leading telecommunications company specializing in the design, installation, and maintenance of wireless communication systems across Nassau and Suffolk county. We provide reliable, cutting-edge solutions to our clients, enhancing their connectivity and communication capabilities. As we expand our operations, we are seeking a skilled Construction/ Electrical Worker to join our team and contribute to our continued success. Job Overview: At Integrated Wireless Technologies, you will play an integral role in the construction and deployment of wireless communication infrastructure. Working closely with our project team, you will be responsible for systems installations, wiring, and troubleshooting telecommunications equipment at various job sites. Your expertise in systems will be crucial in ensuring the seamless operation and functionality of our client's wireless networks. Key Responsibilities: • Collaborate with project managers and team members to plan and execute systems installations as per project requirements., • Install and maintain systems on wireless communication towers, including grounding, bonding, and power systems., • Perform wiring, cable pulling, and termination of telecommunications equipment., • Conduct diagnostic tests on systems, identify faults, and provide solutions to resolve them efficiently., • Ensure compliance with all safety protocols and regulations during system installations., • Maintain accurate documentation of equipment, installations, repairs, and testing results., • Collaborate with other construction workers and subcontractors to ensure efficient workflow and timely project completion.Qualifications and Skills:, • High school diploma or equivalent qualification., • Certifications are a Plus., • Proven experience working in electrical construction and installation, preferably in the telecommunications industry., • Proficiency in conducting diagnostic tests, troubleshooting malfunctions, and reading schematics., • Strong ability to interpret project plans, specifications, and technical drawings., • Exceptional attention to detail and commitment to maintaining high-quality standards., • Ability to work both independently and as part of a team, demonstrating excellent problem-solving and interpersonal skills., • Physical fitness and the ability to work at heights, various weather conditions, and lift up to 70 pounds. If you thrive in a dynamic and innovative environment and possess the necessary skills and qualifications, we invite you to apply for this position. Thank you for considering Integrated Wireless Technologies as your next career move. We look forward to reviewing your application.

Job Description We’re working with a well-established, leading manufacturer of personal care and household cleaning items that is searching for a Director of Quality Systems. This position provides strategic and operational leadership for all quality systems within the facility, regulated under FDA OTC and cGMP standards. This role ensures that all products meet regulatory, quality, and safety standards through system design, compliance, and effective people management. The Director of Quality Systems will lead the Quality Systems team, Microbiology Lab, and Analytical Lab. Location: Long Island, NY Job Responsibilities: • Design, implement, and improve the Quality Management System aligned with guidelines and standards for OTC-regulated personal care products. • Own and drive quality elements such as document control, change control, CAPA, training, deviation management, and quality risk management., • Provide daily leadership to the Quality Systems team, Microbiology Lab, and Analytical Lab, overseeing staff performance, workload management, and interdepartmental collaboration., • Allocate resources and resolve operational bottlenecks to ensure timely execution of quality-critical tasks including sample testing, batch record review, documentation updates, and training tracking., • Facilitate team meetings, establish clear priorities, and maintain accountability against quality KPIs and deadlines., • Support product development by reviewing outputs and acting as a conduit between engineering and manufacturing/operations., • Oversee all functions of the Microbiology Laboratory, including environmental monitoring, product bioburden testing, water quality testing, and method validations., • Oversee the Analytical Laboratory operations, ensuring timely and accurate release testing, stability studies, raw material qualification, and troubleshooting., • Ensure labs are fully cGMP compliant, calibrated, validated, and staffed with qualified personnel; manage investigations for lab-related results., • Lead preparations for and execution of FDA inspections, customer audits, and third-party certifications; own the CAPA lifecycle for all findings., • Own the controlled document system, ensuring all SOPs, test methods, forms, and work instructions are current, compliant, and approved., • Direct investigations for deviations, lab anomalies, non-conformances, and customer complaints., • Use formal tools (e.g., root cause analysis, 5 Whys, Fishbone, FMEA) to drive timely and effective corrective and preventive actions., • Lead supplier quality programs including audits, performance monitoring, and qualification processes., • Develop and grow quality capabilities of the business unit through the development and deployment of shared standards, processes, and best practices. • Promote a culture of accountability, teamwork, and continuous learning within all quality functions., • Drive improvement initiatives that enhance system robustness and operational efficiency. Required Skills/Qualifications: • 10+ years of progressive experience in Quality Assurance or Quality Systems within FDA-regulated industries., • 5+ years of leadership experience managing quality teams and laboratories in a cGMP-compliant manufacturing environment, ideally within OTC or personal care products., • Demonstrated expertise managing both Microbiology and Analytical Labs and their interface with manufacturing and product release., • ASQ CQA, CQE, Six Sigma, or equivalent certifications preferred., • High-level understanding of FDA OTC regulations, 21 CFR Parts 210/211, ISO 22716, ICH Q7–Q10, and laboratory cGMP compliance., • Skilled in leading large teams, mentoring staff, setting priorities, and resolving conflicts under tight timelines., • Strong technical writing, problem-solving, and root cause analysis skills., • Familiarity with Quality Management Systems and lab data management., • Effective communicator with cross-functional teams including R&D, Manufacturing, Regulatory Affairs, and Supply Chain #zr

Job Description Long Island based Financial Firm seeks a Systems Administrator experienced with High-Performance Computing tools. This is a permanent direct hire opportunity. The schedule is on-site 5 days a week in Port Jefferson, NY Compensation is competitive including base + bonus and comprehensive benefits Responsibilities • Design, deploy, support, and troubleshoot Linux server and desktop infrastructure; document IT infrastructure, policies, and procedures; and perform general user support Skills, Qualifications, and Experience • Extensive experience designing, deploying, and supporting Linux servers and desktops, • Experience with HPC tools like Slurm, LSF, PBS, or something similar, • Thorough understanding of systems and network protocols (DNS, TCP/IP, SMTP, HTTP/HTTPS) and UNIX/Linux system internals (kernel, drivers, file systems, virtual memory), • Excellent troubleshooting and creative problem-solving abilities, • Excellent written and oral communication and interpersonal skills, • Bachelor’s degree or higher in a technical field Plus • Experience deploying and supporting open source and proprietary infrastructure services (DNS, DHCP, LDAP, Radius, NFS, Kerberos, OpenSSL), integrating them into the existing infrastructure, and debugging and patching them, • Experience implementing, operating, and supporting open source tools for system and security monitoring and management on UNIX/Linux platforms, • Knowledge of scripting to automate tasks Anticipated base 250-300k +/-, + significant bonus potential

Job Description Job Title: Backend Web Developer Location: Ronkonkoma, NY Job Type: Full-Time Reports to: Web Developer Manager About the Role We are seeking a Backend Web Developer with 4+ years of experience in .NET, C#, and enterprise system integration to support and enhance DynamicWeb-based e-commerce websites while supporting and executing on the transition to a new Commerce site (Magento/Adobe Commerce, WooCommerce, etc.) as our long-term e-commerce solution. The ideal candidate has expertise in backend architecture, API development, cloud services (Azure), and integrations with Microsoft Dynamics 365 Finance & Operations (D365 F&O) and Customer Engagement (D365 CE). Key Responsibilities Support & Enhance DynamicWeb Websites (Current State) • Assist in maintaining, troubleshooting, and enhancing existing DynamicWeb-based e-commerce websites., • Develop and optimize backend functionality using ASP.NET Web Forms, C#, and Razor templates., • Support integrations with ERP (D365 F&O) and CRM (D365 CE) for order processing, inventory, and customer account workflows., • Ensure security, reliability, and performance across backend systems. Contribute to Transition to new Commerce Platform (Future State) • Collaborate with the other developers to build and maintain eCommerce backend functionality., • Develop custom plugins, integrations, and APIs using PHP, MySQL, and eCommerce APIs., • Implement third-party integrations (payment gateways, shipping providers, tax tools)., • Support data migration processes for products, orders, and customers. ERP & CRM Integration • Assist in designing and maintaining workflows and APIs to sync data between D365 F&O, D365 CE, and eCommerce platform., • Implement and support integrations for order management, inventory, and reporting., • Work with Power Automate, Logic Apps, and Azure Functions., • Troubleshoot existing ERP/CRM integrations as needed. Cloud & DevOps • Support CI/CD pipelines, automated testing, and deployments., • Help deploy and maintain backend applications in Azure (App Services, Functions, SQL Databases, Service Bus)., • Contribute to maintaining secure, scalable, and compliant cloud environments. Qualifications & Skills • 4+ years of experience in backend web development, with strong knowledge of .NET Framework 4+, ASP.NET Web Forms and C#., • Experience working with SQL and relational database design., • Familiarity with WordPress + WooCommerce development, including PHP, MySQL, WooCommerce, Magento & WP REST APIs., • Understanding of RESTful APIs, Webhooks, and backend integrations., • Experience with git version control and associated workflows., • Exposure to ERP/CRM integrations (D365 preferred but not required)., • Experience with Azure cloud services (App Services, Functions, Logic Apps, SQL)., • Knowledge of functional testing and test automation., • Modern DevOps practices like Docker containerization, k8s, CI/CD and observability., • Strong problem-solving skills and ability to work collaboratively.

Job DescriptionBenefits/Perks • Competitive Compensation, • Will learn various Types of systems, • Opportunity for Ownership, • Travel to various locations and ascertain their specific needs, • Troubleshoot problems in security systems, and make repairs or replacements, • Install new security systems, including electronic locks, alarms, CCTVs, and more, • Maintain appropriate equipment, and restock vehicles and supplies as needed, • Maintain excellent, accurate logs of work completed at all timeQualifications, • Must have 3+ Years working in the Alarm Industry, • Strong analytical and problem-solving skills, • Excellent attention to detail, • Strong communication and listening skills

Job Description Consolidated Aircraft Supply Co., Inc., based in Ronkonkoma, New York, is a leading FAA Part 145 repair station with EASA certification that has been operational since 1960. We specialize in providing maintenance, repair, and overhaul (MRO) services for aircraft accessories and rotables, with capabilities covering over 50,000 parts, particularly in ATA Chapter 24 Electrical Power. Our services include exchange/loan, outright sales, and aircraft on ground (AOG) support for a diverse clientele, including military and public sectors, cargo and private operators, as well as commercial airlines. We are seeking a dedicated Electronics Bench Technician to join our experienced team of technicians, engineers, and account managers. In this role, you will play a crucial part in ensuring the superior quality and efficiency of the electronic repairs and maintenance we offer to our global customers, contributing to the overall success and sustainability of our operations in the aerospace industry. Responsibilities • Conduct electrical repairs and maintenance on aircraft accessories and rotables., • Perform troubleshooting and diagnostic testing on various electrical components and systems., • Document repairs and maintenance performed in accordance with FAA regulations and company policies., • Assist with the calibration and testing of electrical equipment and systems., • Work effectively with team members to meet project deadlines and service schedules., • Ensure compliance with EASA and FAA standards during repairs and inspections., • Maintain an organized and clean workspace, ensuring safety protocols are followed.Requirements, • High school diploma or equivalent; technical degree in electronics or related field preferred., • Minimum of 3 years of experience in electronics repair or a related field., • Familiarity with FAA regulations and EASA certification requirements., • Proficient in using electronic test equipment and tools, including multimeters, oscilloscopes, and soldering equipment., • Ability to read and interpret technical drawings, schematics, and repair manuals., • Strong analytical and problem-solving skills., • Excellent communication and teamwork abilities.

Job Description Job Description • Building part test setups, qualification testing, making of production test jigs, developing test routines, test software and test automation, • Provide maintenance and repair support for test station hardware, software, and interface test adapters, including both custom-designed and COTS systems., • Test PC boards., • Prepare documentation for PCB assembly and test travelers., • Support test box development and initial production runs., • Utilize C# code for test development., • Perform ATE test integration and development., • Assist Design Engineers, when necessary, in troubleshooting and repairing products returned by customers. Requirements • Bachelor of Science in Electrical Engineering (BSEE), an electrical engineering degree, or equivalent military training and experience., • Candidates should possess a background in power electronics., • Understanding of analog circuit design, circuit analysis, digital circuit design, and analog signal conditioning., • Desirable exposure to software such as C#, embedded code development, and debugger usage.Company DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Health insurance About Us B&L PC Solutions is a 27+ year MSP headquartered on Long Island with a growing presence in Tampa/St. Petersburg. We deliver IT support, cybersecurity, cloud services, and compliance-focused solutions for CPA firms, financial services, legal, and automotive dealerships. The Role We are hiring a Level 2/3 Senior IT Infrastructure & Network Engineer. This is a hands-on, on-site engineering role. You will be the escalation point for complex issues and the lead engineer on upgrades, rebuilds, migrations, and advanced troubleshooting. You must be confident, personable, and exceptional with clients. We are looking for someone who takes pride in being the person who gets it fixed not a ticket jockey. What you will do • Act as final escalation for servers, networks, virtualization, cloud, and security stacks., • Design, deploy, and troubleshoot Layer 2/3 networks (VLANs, STP, routing, VPN, policy)., • Perform Microsoft 365 tenant migrations, Exchange cutovers, and Teams/SharePoint deployments., • Lead on-prem server to cloud migrations and P2V/V2V migrations (VMware & Hyper-V)., • Support & administer Windows Server, AD, DNS/DHCP, Group Policy, Azure AD/Entra., • Manage, configure, and troubleshoot switching and firewalls (Fortinet, SonicWall, Meraki, etc.)., • Support BCDR platforms (Datto, Axcient) and test/validate DR runbooks., • Work directly with clients on-site; represent B&L professionally and confidently. Requirements • 35+ years in an MSP or multi-client environment., • Deep networking experience VLANs, routing, switching, VPNs, firewall rule design., • Expert Microsoft 365 admin skills., • Solid Azure experience identity, conditional access, hybrid, AADConnect, etc., • Advanced virtualization experience in at least VMware or Hyper-V (ideally both)., • Ability to lead projects and run point on technical execution., • Excellent personality, communication skills, ownership mindset., • Willingness to occasionally cover weekend or late-night maintenance windows (rare, but sometimes necessary for cutovers or critical incidents). Bonus / Preferred Experience • Fortinet NSE, Cisco CCNA, Microsoft certs, • SentinelOne, ThreatLocker, Blackpoint Cyber Benefits • Competitive salary (based on experience and proven technical ability), • Health insurance, • SIMPLE IRA with company match, • PTO + paid holidays, • We pay for certifications, and we expect ongoing skill growth, • Optional premium pay when weekend work is needed.

Job Description High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Regularly work with power output up to 450 kV and up to 6kW, • Work on multiple projects varying in complexity from inception to completion, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise or finalize BOMs, • Create and maintain engineering reports, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service, • Participation in the creation of technical documentation, system manuals and customer facing documentation, • Bachelor’s Degree in Electrical Engineering, • Minimum of 3 years of experience in a manufacturing environment, • Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Knowledge of analog circuit design, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Ability to solve complex technical problems with minimal supervision, • Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters, • Proficient soldering skills, • Proficiency in the English language with established written and verbal communication skills, • Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics, • Proficiency in Outlook, Microsoft Word, Excel and PowerPoint, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be legally authorized to work in the US, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • Basic understanding of an ERP system, • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions, • Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • analyze and solve non-routine and complex problems, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job Description Position Title: Senior Test Engineer REV000 Department: Test Engineering Reports to: Director, Test Engineering Job Code: 3i1 FLSA: Salaried (Exempt) EEO Category: 2 - Professionals For more than 60 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Test Engineer will be responsible for overseeing and leading all aspects of test engineering for high-reliability electronics products within the organization. This role combines advanced technical expertise, leadership, and problem-solving abilities to manage and execute complex testing tasks, develop test systems, and mentor a team of engineers. The individual will play a key role in ensuring product quality, improving test processes, and driving innovation in testing methods and equipment. Key Position Accountabilities: • Lead and manage the design, development, and implementation of test systems, test fixtures, and test software., • Provide technical leadership in the troubleshooting, analysis, and resolution of complex test-related issues., • Oversee the testing of prototype, production, and customer-returned products, ensuring all tests are performed to meet quality and performance standards., • Collaborate with cross-functional teams (Engineering, Design, Manufacturing) to develop and optimize testing processes that align with production requirements., • Mentor and provide guidance to junior test engineers, fostering an environment of continuous learning, collaboration, and high performance., • Lead failure analysis and root cause investigation for both in-house and customer-returned products, ensuring corrective actions are implemented and communicated to relevant teams., • Champion the continuous improvement of testing methodologies, test equipment, and process optimization., • Provide technical support in test equipment selection and integration, ensuring the team has the proper tools to execute testing procedures effectively., • Review and approve test documentation, including test plans, test reports, and procedures, ensuring compliance with company and customer requirements., • Ensure adherence to industry standards (e.g., MIL-PRF, IPC) in all test activities., • Support the execution of qualification and certification testing as needed to meet customer requirements., • Education: Education: Bachelor's degree in Electrical Engineering or a related field. Graduate degree is a plus., • Experience: 10+ years of experience in test engineering, with at least 3 years in a leadership or senior engineering role overseeing test activities in a manufacturing environment., • Technical Skills:, • Expertise in designing, developing, and optimizing test systems, test fixtures, and software., • Extensive knowledge of testing techniques, test equipment, failure analysis, and debugging., • Proficient in the use of statistical analysis techniques (SPC) and test data analysis., • Knowledge of electronics manufacturing, including Hybrid and PCB manufacturing., • Familiarity with MIL STDs 883, MIL-PRF 38534, 38510, IPC 610., • Leadership Skills: Proven ability to lead, mentor, and develop teams of engineers, ensuring a high level of performance and collaboration., • Strong problem-solving skills with the ability to diagnose complex issues and drive solutions., • Excellent written and verbal communication skills, with the ability to present technical information to various stakeholders., • Experience with test automation, scripting languages (e.g., Python, LabVIEW)., • Familiarity with modern test equipment and emerging testing technologies., • Ability to influence change and drive improvements in testing processes and practices. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Who are we? Technical Safety Services (TSS) is a leading laboratory service provider with locations across the United States. Our customers include leading life sciences and healthcare companies and renowned research institutions. We are rapidly growing and looking for additional passionate and talented employees to join our team and partner with TSS’ customers who are doing dramatic work focused on improving the human condition. TSS ensures the equipment our customers use to keep their employees and products safe is in full working order. We are the leading provider in the country of testing and certification services for cleanrooms, fume hoods, biological safety cabinets, and other controlled environment equipment. Working at our customers facilities, TSS employees are key enablers – helping ensure safety, accuracy, and compliance in some of the leading laboratories in the United States. How will you make an impact? The Field Service Planning Coordinator will play a crucial role in enhancing the customer’s experience. The impact will be achieved by diligently managing service schedules for both existing and new customers, ensuring exceptional service delivery, meeting deadlines, addressing urgent request promptly, and overseeing repairs. Through these efforts, the coordinator will significantly contribute to the prioritization of our customers satisfaction and safety. ** This position is fully onsite at our Deer Park office location. What will you do? • Client Communication - Promptly respond to client inquiries via phone and email, providing comprehensive product and service information while addressing repair requests efficiently and effectively., • Inventory and Scheduling Oversight - Manage monthly inventory lists, ensuring all items requiring service are scheduled after PO/payment collection, document reasons for any missed items in the scheduling process., • Service Coordination - Organize and schedule field service work orders, prioritizing tasks to ensure the most efficient timeline possible for service delivery, • Order Review and Assignment - Review daily field service orders, assign tasks to technicians, and monitor job progress to ensure timely completion., • Issue Resolution - Identify, investigate, and resolve any client or technician issues that may arise during service delivery, ensuring seamless operations and customer satisfaction. TSS offers competitive salaries and a wide range of benefits: • Medical, vision and dental insurance, • 401(k) plan with a company matching contribution, • Long-term disability, short-term disability, and life insurance Education and Experience • Demonstrate strong communication skills and an ability to deliver results through teamwork, • Proficient in Microsoft Outlook, Excel and Word, • Proficiency in using software or platforms for scheduling and coordination purposes., • Must think critically and creatively and be able to work independently as well as have strong organizational and planning skills., • Strong interpersonal skills, • Ability to successfully solve challenging issues, perform critical thinking, and be detail oriented, • Excellent organizational ability – can easily multitask and shift priorities as need, • Ability to think and plan strategically., • Excellent customer service and communication skills, both verbal and written., • Strong troubleshooting and problem-solving skills with the ability to learn new systems and services., • Excellent organizational skills and attention to detail., • Ability to thrive in a fast-paced, dynamic environment while maintaining a customer-centric approach. Powered by JazzHR VBcAmJ8b6Z

Job Description Job Title: Working Lead Mechanical/Electromechanical Technician Weekend Shift: Friday, Saturday, Sunday, Monday (6am-4:30pm) Pay: $34/hr Contract 6+ months, expected to be an indefinite contract (outsource their maintence to Aerotek Services) The IFCO facility is located in Mcdonough, GA Job Description The Working Lead Mechanical/Electromechanical Technician is responsible for advanced maintenance, repair, troubleshooting, and installation of mechanical and electromechanical equipment. This position requires expertise in test equipment, mechanical and electrical drawing usage to access and troubleshoot equipment. It offers an excellent opportunity for professional growth in the electromechanical maintenance field, as well as leadership training. Responsibilities • Perform routine and preventive maintenance on mechanical and electromechanical systems to ensure optimal performance and longevity., • Conduct detailed inspections and diagnostics to identify potential issues before they lead to equipment failure., • Utilize automated CMMS to document maintenance items and schedule future items., • Independently troubleshoot and resolve complex mechanical and electromechanical malfunctions., • Repair or replace defective components, including motors, sensors, actuators, and control systems., • Utilize GUI/HMI components to assist in troubleshooting and correction of system issues., • Lead the installation and commissioning of new equipment and machinery, following technical specifications and engineering drawings., • Calibrate and test equipment to ensure proper operation and performance., • Adhere to all safety protocols and procedures, maintaining a safe working environment., • Ensure compliance with company policies, industry standards, and regulatory requirements in all maintenance activities., • Maintain accurate records of maintenance activities, including detailed reports on inspections, repairs, and parts usage., • Provide feedback and recommendations to improve equipment reliability and performance., • Work with CMMS to produce reports that assist in the maintenance production and operational schedules and execution., • Assist in training and mentoring Level 1 technicians and new team members., • Troubleshooting skills in mechanical and electrical systems., • Proficiency with hand and power tools., • 3-5 years of industrial maintenance experience., • Some previous experience leading or supervising others in a maintenance capacity., • Strong problem-solving and analytical skills., • Ability to read and interpret technical manuals, schematics, and engineering drawings., • High school diploma or GED equivalent., • Certification or associate degree in mechanical or electromechanical technology is preferred., • Minimum of 2-4 years of experience in a maintenance or technical role. The shift for this role is Friday, Saturday, Sunday, and Monday from 6 AM to 4:30 PM, with initial training for at least one week on a day shift from Monday to Friday. The facility is located in Mcdonough, GA, which is 45 minutes southeast of Atlanta. The work environment includes varying conditions such as heights, confined spaces, and outdoor settings. Employees must be comfortable lifting and carrying up to 50 pounds and willing to work flexible hours, including overtime and weekends as needed. Why Work Here? This position provides an excellent opportunity for professional growth and development in the electromechanical maintenance field, along with leadership training. Employees benefit from a supportive work environment that encourages skill enhancement and career advancement. Job Type & Location This is a Contract position based out of Mcdonough, GA. Pay and Benefits The pay range for this position is $34.00 - $34.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mcdonough,GA. Application Deadline This position is anticipated to close on Dec 16, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDuro Dyne/Supco is seeking dynamic individuals to become part of our winning team. If you are a highly motivated team player who is interested in an exciting career with a leading global manufacturer then this job is for you! Duro Dyne/Supco is committed to providing superior quality and unparalleled dedication to all aspects of our business. We believe every employee contributes to the success and growth of our company. As an employee at Duro Dyne/Supco, you reap the benefits of being part of an expanding company that still maintains a progressive employee culture and atmosphere. The Inventory Controller’s primary function is to ensure accurate inventory levels, research and respond to customer inquiries regarding shortages/overages, and maintain inventory integrity within the ERP system. This role plays a key part in supporting warehouse performance, customer service responsiveness, and system accuracy. Job Duties: • Review and validate daily cycle counts; research variances and determine root causes., • Respond to customer inquiries related to shortages, overages, and inventory discrepancies., • Issue credits for shortages and process billing charges for overages., • Maintain and update inventory records in the ERP system, including adjustments, transfers, and receipts., • Monitor bin locations, item labeling, and stock organization to ensure accuracy and efficiency., • Investigate warehouse transactions to verify product flow and correct any discrepancies., • Review receiving transactions to ensure items are received, labeled, and entered correctly., • Process and document customer returns (RMAs) so items are dispositioned and restocked accurately., • Support preparation and execution of year-end physical inventory counts., • Assist with system migration tasks including data validation, troubleshooting, and issue escalations., • Collaborate with Customer Service and Finance on inventory-related resolutions., • Provide support on inventory-related projects or process improvements as needed., • Perform other duties as assigned.Additional Requirements, • Strong attention to detail and accuracy., • Ability to work independently with minimal supervision., • Strong communication skills when interfacing with internal teams and customers., • Comfortable working in a fast-paced environment with competing priorities., • Must be able to work on-site Monday–Friday.Education, • High School Diploma or GED required.Experience, • A minimum of 3 years of inventory control or warehouse inventory experience., • Experience with cycle counting and variance research required., • Proficiency in MS Excel, Outlook, and ERP inventory systems., • Ability to lift, push, and/or pull up to 50 lbs. repeatedly., • Ability to stand, walk, bend, and work in a warehouse environment daily.Benefits, • 401(k), • 401(k) Matching, • Health/Dental/Vision insurance, • Flexible Spending Account, • Dependent Spending Account, • Company Paid Life Insurance & AD&D, • Short & Long Term Disability, • Paid Time Off & Paid Holidays, • Referral Program, • Company BBQs and other team eventsDuro Dyne/Supco maintains a drug-free workplace and requires all candidates to complete and pass a drug screen and background check after a conditional offer of employment has been extended. Duro Dyne/Supco is proud to be an EEO employer M/F/D/V. Duro Dyne/Supco is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Job Type: Full-time Salary: $20-$25/Hour Benefits: NSI Industries offers a competitive salary, performance-based and attendance bonuses for certain roles. We offer health, dental, and vision insurance. Retirement savings plan with company match. Paid holiday time off and vacation. EEO employer M/F/D/V: NSI Industries is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Reasonable Accommodation: NSI Industries is committed to providing reasonable accommodation for qualified individuals with disabilities. If you require assistance or accommodation during the application process, please contact your Recruiter for assistance. We comply with federal and state disability laws and make reasonable accommodation for applicants and employees with disabilities to ensure equal employment opportunities. Physical Work Requirements: Many roles at NSI Industries require physical activities where the employee must occasionally lift and/or move items or require specific vision abilities. Drug Free Workplace: NSI Industries maintains a drug-free workplace and requires all employees to complete and pass a pre-employment drug screen and background check. Powered by JazzHR vsJbaxnSLK

Job Description Embedded Design Engineer For over sixty years, the Orbit Electronics Group has designed and manufactured customized electronic subsystems and major components for military aircraft, shipboard, handheld, and ground-based programs, as well as designing hardware to support rugged non-military applications. Advanced in-house technologies, proven design expertise and diligent analysis of the relationships between human and machine enable the Orbit Electronics Group to deliver products that increase user productivity, reliability, and overall performance in mission-critical applications. Our products include Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more. Our goal is to ensure Total Customer Satisfaction by providing our customers with the best available equipment and service so they will recognize Orbit as the source for their Human Machine Interface (HMI) needs. Job Description This position primarily involves software/firmware and hardware design as part of the Orbit Electronics Group engineering team. The right candidate should be able to bring an embedded design from concept to completion. • Software/firmware and hardware design and implementation of embedded systems to use in Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more., • Use computer-assisted engineering and design software and equipment to perform assignments, applying principles and techniques of electrical engineering to accomplish goals., • Design of test software and test suite packages including selection of accompanying commercially available test equipment and design of non-standard test equipment., • Participation in preparation of specifications and documentation related to new and legacy designs., • Assist in troubleshooting of new and legacy embedded designs, which include a broad mix of communication protocols. Work with other members of the multi-disciplinary engineering team to bring designs to realization. Requirements US citizenship or permanent residency required Minimum of 2-years’ experience in an embedded systems or software design role Bachelor’s degree in Computer Engineering, Electrical Engineering, or a related field Experience in embedded software development, including firmware design and low-level programming Experience with Schematic Capture and PCB design tools is preferred Experience designing mixed-signal circuits (combining analog and digital components) is preferred Experience writing code in C or C++ is a plus Experience with Real Time Operating Systems is a plus Organized and detail oriented Good interpersonal skills, along with verbal and written communication skills Ability to work in both a team environment and independently Benefits *401K *Health Insurance *Vision and Dental Insurance *Paid Time off (Vacation, Holidays, sick leave etc.) *Flexible Spending Accounts *Tuition Assistance *End of year time off *Opportunities for advancement Salary $70,000 - $80,000 Depending on experience. Schedule Monday – Friday 8:00am – 5:00pm (onsite) Company DescriptionLong Island, NY company founded over fifty years ago as an engineering, manufacturing and consulting firm for power products. Over the past fifty plus years, our company has grown to become a world class provider of the highest quality Standard, Modified Standard, Custom and COTS AC Power Sources, Frequency Converters, Inverters, DC-DC, AC-DC, DC-AC, and Uninterruptible Power Sources (UPS) for commercial, industrial and military mission-critical applications. We have a proven ability to solve any power requirement, and we support our products with personal service that exceeds even your highest expectations.Long Island, NY company founded over fifty years ago as an engineering, manufacturing and consulting firm for power products. Over the past fifty plus years, our company has grown to become a world class provider of the highest quality Standard, Modified Standard, Custom and COTS AC Power Sources, Frequency Converters, Inverters, DC-DC, AC-DC, DC-AC, and Uninterruptible Power Sources (UPS) for commercial, industrial and military mission-critical applications. We have a proven ability to solve any power requirement, and we support our products with personal service that exceeds even your highest expectations.

Job Description Title: Cybersecurity & Network Engineer Department: Information Technology Reports To: Chief Information Technology & Digital Officer (CITDO) or Manager, Technical Services FLSA Status: Exempt Location: On-site — Ronkonkoma, NY (with flexible work-from-home as needed) Position Overview The Cybersecurity & Network Engineer designs, secures, and operates the organization’s IT infrastructure across on-premise and cloud environments. This hands-on role strengthens Qosina’s network backbone and cybersecurity posture; configuring firewalls, switches, and virtual environments while performing penetration tests, audits, and incident response. It is a balanced position for an engineer equally skilled in infrastructure management and cyber defense. Essential FunctionsNetwork & Infrastructure Engineering • Design, implement, and maintain reliable LAN, WAN, and WLAN networks., • Configure and secure switches, routers, firewalls, VPNs, and wireless APs., • Manage routing, segmentation, and performance optimization., • Support virtualization environments and ensure secure on-prem ↔ cloud connectivity., • Troubleshoot and resolve complex networking and infrastructure issues.Cybersecurity Operations & Compliance, • Conduct and support security audits, vulnerability assessments, and penetration tests., • Monitor, detect, and respond to cybersecurity events within SecOps processes., • Implement and enforce policies and controls aligned with GRC frameworks., • Maintain system/network hardening baselines, patch compliance, and incident documentation., • Support recovery, backup validation, and business continuity planning.Governance & Collaboration, • Align network and security engineering with enterprise governance, risk, and compliance objectives., • Develop and maintain documentation, policies, SOPs, and audit evidence., • Governance, Risk & Compliance (GRC): Defines risk appetite, policies, and controls., • Security Operations (SecOps): Detects and responds to threats across all layers., • User: Manages identity, access, and awareness training., • Data: Safeguards information via classification, encryption, and DLP., • Application: Secures software and API traffic flows., • Host: Hardens servers, endpoints, and virtual machines., • Network: Controls traffic flow, segmentation, and Zero-Trust connectivity., • 7 + years combined experience in cybersecurity and network engineering., • Proven expertise in:, • Firewall, router, and switch configuration and management, • Network segmentation and VPN design, • Security audits and vulnerability remediation, • Windows and Linux administration, • Virtualization and hybrid-cloud connectivity, • Identity and access management (MFA, RBAC, PAM), • CCNP, Security+, CISSP, or equivalent professional certification.Professional Attributes, • Analytical mindset with strong troubleshooting skills., • Attention to detail and documentation discipline., • Ability to work independently and collaboratively across teams., • Commitment to continuous learning and security excellence.Why Join Qosina, • Direct impact on enterprise security and network resilience., • Modern, collaborative, and mission-driven IT culture., • Flexible on-site schedule and career development support., • Competitive compensation and professional certification programs.

Job DescriptionDescription: Metro Physical & Aquatic Therapy is a comprehensive multidisciplinary company who offers Physical, Occupational, Speech Therapy, Massage and Acupuncture services. We take great pride in inspiring our team to create an everlasting bond with our patients, our doctors, and our community. But it’s not just what we do, it’s who we are. We are driven by our mission to continually invest in our people and offer the best workplace environment possible. Metro Physical & Aquatic Therapy has immediate opening for a Clinic Support Associate! Come be a part of a growing organization in a progressive, supportive, and innovative team! Are you looking for an exciting opportunity in a fast-growing industry? Do you want to make a difference in people's lives while you grow your career? Are you interested in delivering compassion, excellence, and reliable service to patients? We want you to apply your energy and skills t become an integral part of a caring, professional team that provides the highest quality care to our patients. Days & Hours: Monday-Friday 1130am-8pm and 8am-430pm Essential Functions: • Welcomes patients and visitors with an upbeat attitude and a warm and inviting smile - in person or on the telephone; answering or referring inquiries., • Demonstrate a high level of customer service at all times. Patient’s satisfaction, provider time, and treatment room utilization by scheduling appointments in person or by telephone., • Generate a compilation of reports, logs and lists including but not limited to authorization and verifications with a high level of accuracy., • Ensure co-pays are tallied and reconciled and control credit extended to patients., • Call treating physicians to obtain updated prescriptions for treatment by Occupational and Physical Therapists., • Obtains Plan of Cares from treating physician and update system., • Set up a new /returning patient case in Theraoffice which includes obtaining new demographic information and all existing insurance information., • Keeps patient appointments on schedule by notifying Clinicians of patient’s arrival; reviewing service delivery compared to schedule; reminding provider of service delays., • Ensures availability of treatment information by filing and retrieving patient records., • Maintains business office inventory and equipment by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies; scheduling equipment service and repairs., • Maintains a working knowledge of Metro, rules and policies, and works to ensure the compliance with the stated parameters. Perform other duties and assignments as required., • Maintains strictest confidentiality; adheres to all HIPAA guidelines/regulations., • Perform other duties and assignments as required. Serve as a scribe for recording and editing therapeutic exercises under the supervision of a Doctor of Physical Therapy and/or Occupational Therapy, • Helps treat patients by preparing heat and ice packs; paraffin dips; assisting patients to the pool; guiding patients to exercise equipment, monitoring motion; tracking patient physical exertion levels; guiding patients through prescribed exercises and strengthening techniques., • Ensures operation of treatment equipment by completing preventive maintenance requirements; following manufacturer's instruction; troubleshooting malfunctions; calling for repairs., • Educates patients by demonstrating proper use of equipment and exercise routines., • Prepares patients for therapy treatment by welcoming, comforting, providing, and/or assisting patients into therapy sessions., • Provides information to patients by answering questions and requests; allaying fears., • Maintains patient confidence and protects operations by keeping information confidential., • Maintains a safe and clean working environment by complying with procedures, rules, and regulations., • Provides equipment and supplies by sterilizing and delivering equipment and supplies to the treatment area; positioning equipment for therapist access; positioning patients on equipment., • Prepares treatment room for patients by following prescribed procedures and protocols., • Answers calls from physician offices, hospitals, and patients using exemplary customer service skills., • Maintains physical therapy supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies., • Provide front desk coverage as needed; this includes answering calls from physician offices, hospitals and patients, and assisting with scheduling., • Performs other duties and assignments as required.Requirements:, • One (1) year of Physical Therapy/Medical office experience, • Experience with a EMR System a plus, • Ability to communicate to customers, co-workers and management in a professional/courteous manner., • Current or recent experience in a medical practice assuring compliance with federal, state and local regulations and guidelines., • Must work well within a team environment., • Excellent interpersonal and communication skills, • Proficiency in the Google Suite platform and ability to learn new programs quickly., • One year of experience in a customer service-oriented is strongly desired., • High school diploma or GED is required. Knowledge of the equipment used in therapy work., • Knowledge of the behavior and needs of patients., • Knowledge of proper strengthening techniques., • Knowledge of the use of restraints and aggressive behavior management practices., • Ability to successfully complete in-service training., • Ability to observe, evaluate, and record conditions, reactions, and changes in patients' physical condition., • Ability to maintain appropriate attitude and conduct necessary to the welfare of patients., • Ability to create and maintain records and write brief reports., • Ability to communicate effectively.

Job DescriptionDescription: Job Description The individual will be doing hands-on repair, assembly, soldering, or re-manufacture of mechanical and electromechanical components utilizing company provided approved data. The technician will be responsible for testing, troubleshooting, and repairing electrical, electromechanical, and machined assemblies sent in for repair evaluation by our customers. Training, technical documents, and oversight are provided by PG Aerotech management. Essential Responsibilities • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2 or more years of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • The ability to lift up to 20 lbs., • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • Hourly position commensurate with experience and skill level and/or certifications. ($24 - $32) PG Aerotech is an equal opportunity employer. Visit our website at PG Aerotech | Jet Parts Engineering Requirements:

Job Description Established in 1926, Family Service League is a social services agency transforming lives and communities through mental health, addiction, housing, and essential human services with more than 60 social service programs in over 20 locations. SCHEDULE: Monday through Friday 8:00 AM - 4:00 PM SUMMARY: Family Service League is seeking a full-time Senior IT Administrator to be responsible for discovering new technologies to assist the Agency in meeting its mission, as well as finding ways to increase efficiencies using existing technology. This position is responsible for designing, developing and maintaining the agency’s network, systems and SaaS applications, ensuring that all assets operate at optimum performance levels and are safeguarded. The Senior IT Administrator ensures the security of data, voice, hardware and software, using best practices and techniques. We offer a competitive compensation, and generous benefits package including the following: • Health and Dental Insurance, • Vision Insurance, • Flexible Spending Account (FSA), • Retirement Savings Plan with a 5% employer contribution, • Life and AD&D Insurance, • Generous PTO (paid time off), • Up to 11 paid Holidays, • Paid Sick Leave, • Student Tuition Remission Program, • Employee Assistance Program (EAP), • Company paid Short-Term and Long-Term Disability, • Employee Discounts and more! RESPONSIBILITIES: • The Senior IT Administrator will set up and manage the Data Loss Prevention (DLP) program by creating clear rules, standard procedures, service expectations, and automating routine tasks via workflows., • Handle security exception requests, vendor risk assessments, endpoint security products and policies, incident response, and external secure file sharing., • Manage and support major SaaS platforms (e.g Microsoft Power Apps, Microsoft365, Google WorkSpace, etc), • Monitor the performance of Data-Driven Networks, Systems and Applications (OnPrem/ SaaS). Collect and analyze network data, use data from security tools to perform security incident forensics and root-cause analysis, and monitor computer and device activity using data analytics to detect potential security issues., • The Senior IT Administrator will manage the design, performance and improvements of the Agency’s network and communication technologies, ensuring that systems and platforms align with best practices and FSL’s strategic objectives., • Actively support the Agency’s strategic initiatives and contribute to organizational performance by implementing hardware, software and procedural efficiencies related to the Agency’s network., • Manage and monitor cyber security events pertaining to FSL’s assets (Data, Network, Systems, Applications (OnPrem/ SaaS))., • Oversee FSL security systems, including security camera hardware (OnPrem/ SaaS), by assigning access-privilege levels and ensuring proper functioning of FSL’s multi-site access-control systems., • Identifying training needs and providing education to both end users and IT staff on best practices that supports and strengthens the organization’s security posture., • Manage and monitor FSL’s Mobile Device Management (MDM) System, and deployment programs., • The Senior IT Administrator will ensure that hardware is accurately inventoried, software licenses are secured, and renewal schedules are tracked., • Assist IT team in the areas of desktop troubleshooting and phone support, laptop/tablet set-up, and the maintenance of equipment and license inventories., • Provide input to the planning and development of the Agency’s annual IT budget., • Assist in coordinating activities related to Disaster Recovery and Business Continuity Planning., • Anticipate and recommend projects and solutions for emerging technical concerns., • Complete assigned projects by coordinating resources, developing timetables and working with management and users to optimize timely solutions., • Strong written and verbal communication skills to present findings and recommendations clearly to both technical colleagues and non-technical business leaders., • Maintain documentation for all agency technology., • Provide technical support as needed during evenings, weekends, and other off-hours., • All other duties as assigned. QUALIFICATIONS: A Bachelor’s Degree in Computer Science, Engineering, or related field is required. A Master’s degree and relevant professional certifications are preferred. At least 5 years of progressive experience that includes strong knowledge of network and system administration, communication protocols, coding languages and diagnostic tools. Experience in a healthcare environment is preferred. Demonstrated experience in SQL, Power BI, Microsoft Active Directory, and Business Continuity are required. Knowledge of Microsoft SharePoint, Power Platform are preferred. Familiarity with cloud networking concepts, including integrations, SaaS gateways, and cloud security best practices. Strong Scripting knowledge (e.g PowerShell) for automating routine administrative tasks. Advanced level skills in all Microsoft Office applications required. Strong ability to explain technical findings clearly and effectively to various audiences. Strong understanding of statistical analysis and techniques to interpret data correctly. Strong troubleshooting skills and the ability to work independently required. Strong interpersonal, team building, and verbal and written communication skills required. Strong ability to multitask, along with excellent judgement and problem-solving skills required. PHYSICAL REQUIREMENTS: This position often requires sitting and working at a computer for extended periods of time. Must be able to lift and carry fifty (50) pounds. Driving: Travel to Agency offices and other locations throughout Suffolk and Nassau County.

Job Description Dispatch Coordinator Our Family Broadway National, one of Inc. 5000’s fastest growing privately owned companies, provides national and international Property Management services to high profile clientele throughout a wide range of businesses. Such businesses include Tech, Restaurant, Super Market, Facility Maintenance, Retail, Specialty and more. Job Responsibilities: • Efficiently schedule and prioritize service calls to minimize downtime and maximize productivity., • Dispatch and delegate work assignments to technicians based on skillset, availability, and job urgency., • Monitor job progress and maintain consistent follow-up to ensure tasks are completed on schedule., • Track material, verify availability, and follow up on lead times to keep projects on track., • Communicate daily with technicians, customers, and internal departments to ensure seamless operations., • Update and maintain scheduling calendars and logs., • Assist with troubleshooting logistical issues as they arise and implement solutions quickly. ( some trade background preferred ), • Utilize internet-based tools, Microsoft Outlook, and internal systems for scheduling and communication., • Maintain a high level of accuracy in data entry and documentation., • Help scheduling vehicle maintenance for our technicians. Job Qualifications: • Previous experience in dispatching, logistics coordination, or a related scheduling role., • Strong multitasking skills with the ability to manage multiple priorities simultaneously., • Excellent problem-solving and critical-thinking abilities., • Skilled in delegating tasks effectively and communicating clearly with technicians., • Knowledge of material tracking, ordering processes, and lead-time management., • Proficiency with the internet, Microsoft Outlook, and basic computer applications., • Strong organizational skills and attention to detail., • Ability to work in a fast-paced environment and stay calm under pressure. Benefits: • Medical, Dental and Vision, • Company paid Group Term Life Insurance, • 401 (k) Retirement savings plan (company match), • Paid vacation, sick/personal time, and floating holidays, • Paid Holidays Why Broadway? We aim to provide our employees with a family-oriented atmosphere, where they are encouraged and motivated in a comfortable setting, while still being given the proper tools to grow within the company. As we experience rapid growth each year, we strive to assure our employees grow with us. Our company welcomes both those who have industry experience and those who are interested in learning about the facility maintenance business. We offer extensive training to new hires, providing them with the skill set needed to succeed. Our goal is to not only to provide exceptional customer service to our clients, but also to create an environment where employees flourish. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Either 10AM to 7PM or 9AM to 6PM

Job DescriptionEvents & Shows Lead Manager Location: Hauppauge, NY Company: Bath Planet of Metro New York About Us: Bath Planet of Metro New York is one of the fastest-growing brands in the acrylic bath remodeling industry. Our mission is simple: to beautify bathrooms across North America by manufacturing and installing attractive, durable, and maintenance-free bath remodeling fixtures—ultimately enriching the lives of everyone we touch. We are currently seeking a highly organized and experienced Marketing Events Coordinator to join our team and help grow our presence throughout the New York market. Key Responsibilities: * Event Planning & Strategy: Define event objectives, develop timelines, and manage event budgets. * Venue Selection: Research and secure locations that align with event needs including capacity, amenities, and overall atmosphere. * Event Logistics: Oversee all on-site logistics including layout/floor plans, setup, catering, transportation, and vendor coordination. * Marketing & Promotion: Promote events, manage communications with attendees, and ensure branding consistency. * On-Site Execution: Lead and manage the event as it happens, coordinating staff and volunteers, troubleshooting issues, and ensuring a smooth experience. * Post-Event Analysis: Gather feedback, evaluate outcomes, and develop post-event reports for continuous improvement. * Script & Methodology Adherence: Lead by example and ensure staff consistently follow established scripts and methodologies. * Staff Management: Act as the main point of contact for staff—coordinating schedules, assigning responsibilities, and fostering team alignment. * Recruitment & Scheduling: Hire, train, and schedule Event Demonstrators to work trade shows and events. * Lead Generation: Set appointments for free in-home consultations, collect contest entries, and follow up to convert leads. * Event Calendar Management: Research, negotiate, and book a robust calendar of events and trade shows throughout the year. Qualifications: * Strong communication and interpersonal skills * Outgoing, enthusiastic personality * Excellent planning and organizational abilities * Demonstrated ability to lead, coach, and motivate a team * Skilled in managing multiple priorities under tight deadlines * Ability to stand for extended periods and lift up to 30 pounds * Comfortable working weekends and attending events in person * Previous event planning or trade show coordination experience preferred Compensation & Benefits: * Competitive base salary with monthly performance-based bonuses * Year-end bonus potential * Medical, Dental, and Vision insurance * Paid Vacation and Paid Sick Time * Professional Development opportunities * Company laptop and phone provided * Car allowance of $350/month If you're a strategic planner with a passion for event marketing and team leadership, and you're looking for a role that offers both responsibility and reward, we'd love to hear from you! Apply today and become a part of the Bath Planet success story. Powered by JazzHR u9BEXuhV5D

Job Description Are you looking for a career that challenges you and gives you the opportunity to learn and grow every day? Oliver Inc. is hiring! Our growing Company is looking for enthusiastic talents to partner with our customers for all their printing and packaging needs! With more than 250 years of experience, multiple production facilities, and investment in state-of-the-art technology with an emphasis on sustainability, Oliver Inc. offers speed, consistency and nimbleness as a one-stop solution for all of your printing & packaging needs. At Oliver Inc, our core values are part of the framework of our organization. We're passionate and enjoy our work! We value respect and focus on servicing our customers' needs by providing them with creative solutions that help build their brands. When you partner with Oliver, you partner with success. We are currently seeking an experienced Die Cutting Operator to join our team. The ideal candidate has a background in printing or packaging and experience operating die cutting equipment. This role is responsible for setting up, adjusting, monitoring, and operating die cutting machinery; completing make-readies; pulling samples; verifying accuracy; and ensuring the highest level of product quality throughout the run. If you want to join a people-centered company with a strong team culture, we encourage you to apply. About the Role As our Die Cutting Operator, you will: • Adjusts and operates die cutting machine preparing all processes required (ex. Stripping, blanking)., • Maintains and performs minor repairs on equipment., • Ensures total quality of the job while in operation., • Works in a fast-paced environment and demonstrates teamwork spirit., • Performs preventative maintenance and minor repairs on equipment. You're a fit for the role of Die Cutting Operator, if your background includes: • Previous experience as a Die Cutting Operator or Die Cutting Pressman in the printing, packaging, or folding carton industry., • Hands-on experience with steel rule dies, counter plates, make-ready materials, and stripping/blanking tools., • Strong understanding of paperboard substrates (SBS, CCNB, Kraft, etc.) and how they affect cutting, scoring, and creasing., • Ability to read and interpret job tickets, CAD layouts, die lines, and quality specifications., • Proven ability to complete accurate make-readies with minimal supervision., • Mechanical aptitude and strong troubleshooting skills with die cutting equipment., • Familiarity with Bobst, Heidelberg, or similar equipment (preferred)., • Solid math skills and ability to measure tight tolerances., • Excellent attention to detail and quality standards., • Ability to lift 50+ lbs, stand for long periods, and work in a manufacturing environment., • A positive, team-oriented attitude and strong work ethic. Oliver Inc is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Manufacturing Supervisor – DPI (1st, 2nd, or 3rd Shift) Work Location: Hauppauge, NY Employment: Full-Time | On-Site Industry: Pharmaceutical Manufacturing A large regulated pharmaceutical manufacturing facility in Hauppauge, NY, is seeking a Manufacturing Supervisor (Dry Powder Inhalation – DPI) to lead operations on the production floor. This role will supervise teams, support production schedules, champion safety and quality standards, and ensure compliance with cGMP guidelines. Position Summary This role oversees the daily operations of DPI manufacturing and supports product development, commercial production, documentation, and safety compliance. The Supervisor will lead a team of operators and collaborate with cross-functional departments to achieve manufacturing schedules and maintain product quality. Key Responsibilities • Lead and supervise manufacturing activities for DPI products in a cleanroom/controlled environment, • Assign tasks, support daily troubleshooting, and ensure adherence to SOPs and cGMP, • Review batch manufacturing records and support investigations, deviations, and documentation, • Coordinate with QA, QC, R&D, Maintenance, Supply Chain, and other departments, • Support validation batches, bio-batch execution, and technical transfers, • Enforce safety procedures, equipment cleaning, and facility standards, • Train and evaluate employees based on performance expectations and policy guidelines, • Participate in audits, compliance reviews, and regulatory inspections, • Monitor productivity, equipment performance, and process improvements, • Maintain accurate technical documentation and compliant records, • Support extended working hours or weekends if required by production demand Required Qualifications ✔ Bachelor’s or Master’s degree in Pharmaceutical Sciences, Pharmaceutical Engineering, or related fields ✔ 1–3 years of hands-on experience in pharmaceutical or regulated manufacturing ✔ Strong understanding of cGMP, SOPs, compliance, documentation, quality & safety ✔ Ability to investigate deviations and support root cause analysis ✔ Proficiency in Microsoft Office; familiarity with SAP is a plus Preferred Background • Pharmaceutical / Biopharmaceutical Manufacturing, • Medical Device / Sterile Manufacturing, • Respiratory Technology Products (MDI, DPI preferred), • FDA/USP/GMP-Regulated Production Work Schedule • Primary Opening: 2nd Shift, • Additional shifts may be available (1st, 2nd, or 3rd) based on business needs Benefits Overview (Company Policy Applies) • Medical, Dental, Vision insurance, • 401(k) with company match, • HSA / FSA Programs, • PTO (Vacation / Sick / Flex Days / Holidays), • Disability, Parental Leave, Family Leave, • Employee Discounts & additional corporate benefits

Job Description Full-time career opportunity for a Senior Engineer to design and implement high-performance digital systems using VHDL. This role involves FPGA-based design, validation, troubleshooting, and collaboration with cross-functional teams. Key Responsibilities: • Lead design, development, and optimization of digital circuits/systems using VHDL., • Verify and validate designs through simulations and testing., • Collaborate with architects, hardware, and software teams to define requirements and solutions., • Debug and optimize FPGA hardware/software interactions., • Document design processes and results., • Plan and manage development schedules and resources., • Mentor junior engineers and promote best practices., • Bachelor's or Master's in Electrical/Computer Engineering., • 8–15 years of digital design experience with FPGA projects., • Proficiency in VHDL and FPGA design tools (Xilinx, Altera)., • Experience with PCIe, Ethernet (1G/10G), TSN, and system-level design/verification., • Strong knowledge of FPGA architectures, high-speed design, and DO-254 certification processes., • Excellent problem-solving, communication, and teamwork skills. Well-established, stable company. Long-term projects featuring great technology. They are a great group of people to work with.

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

THE OPPORTUNITY We are seeking a highly skilled and motivated Production Supervisor to oversee daily operations in our facility. This position is responsible for managing the production floor, including job scheduling, employee supervision, quality control, and maintenance of UV, digital, and press machines. The ideal candidate will have a solid understanding of machine maintenance, production scheduling and be proficient in Microsoft Office, Teams, and Label Traxx for efficient coordination and communication. REPORTING STRUCTURE This role reports to the Director of Operations and is located on-site in Deer Park, NY. RESPONSIBILITIES • Team Leadership: Supervise production staff, providing guidance, training, and performance feedback to create a productive and skilled team., • Job & Employee Scheduling: Plan and schedule production jobs to meet customer deadlines and maximize machine uptime. Create daily and weekly employee schedules to ensure optimal staffing for each shift and production area., • Operational Management: Oversee day-to-day operations with a focus on UV printing, digital, and press machines, ensuring that production meets quality standards, efficiency goals, and scheduled timelines., • Machine Maintenance: Ensure regular maintenance and cleaning of UV, digital, and press machines to keep them running efficiently. Coordinate with maintenance staff for preventive maintenance and promptly address any machine malfunctions or repairs., • Process Optimization: Identify and implement process improvements, working closely with cross-functional teams to streamline workflows, reduce downtime, and maximize equipment utilization., • Safety & Compliance: Enforce safety policies and ensure all operations comply with OSHA and company standards, maintaining a safe environment for all team members., • Quality Control: Collaborate with the quality assurance team to perform quality checks, especially on outputs from UV and digital machines, to ensure high standards are consistently met., • Inventory & Materials: Oversee materials and inventory for machine operations, ensuring timely availability for production and working with procurement as needed., • Documentation & Reporting: Maintain accurate records of production output, equipment performance, maintenance schedules, and material usage; prepare reports on machine efficiency and operational KPIs for management., • Training & Development: Conduct specialized training on UV, digital, and press machines for new hires and ensure continuous skills development among team members. REQUIREMENTS • Education: Associate or Bachelor’s degree in Operations Management, Industrial Engineering, or a related field preferred., • Experience: Minimum of 3-5 years of supervisory experience in a manufacturing or packaging environment, with specific experience in operating and maintaining UV printing, digital, and flexographic press machines. TECHNICAL SKILLS • Proficiency in Microsoft Office applications (Excel, Word, Outlook), Microsoft Teams, and Label Traxx., • Strong leadership and team management abilities, including staff scheduling and workload balancing., • Skilled in machine operation, preventive maintenance, and troubleshooting for UV, digital, and press equipment., • Excellent communication skills for effective cross-departmental collaboration., • Knowledge of quality control standards and Lean/Six Sigma methodologies is a plus., • Experience with ERP systems and Label Traxx software is highly desirable. WORKING CONDITIONS • Environment: Role involves work in a manufacturing setting with exposure to machinery, noise, and various temperatures. Some office work is also required., • Physical Requirements: Ability to move around the facility frequently, oversee equipment, and occasionally lift up to 50 lbs if needed. POSITION BENEFITS The compensation package for this position is commensurate with experience and includes an attractive base salary with bonus incentive and a comprehensive benefits package.

Job DescriptionFlexible IT is the largest MSP in Long Island, NY. We operate out of our company-owned 40,000-square-foot facility located in Hauppauge, New York. We help small & mid-size businesses with their information technology needs. We are driven by a passion for finding better ways to do things. Whether it’s streamlining an existing process or introducing new ways of doing things – we love helping people use technology. Be part of a team, that fosters training, development, and career advancement, while focusing on solving complex IT needs for their clients. We are looking for an energetic, self-learner, responsible with a strong work ethic Low Voltage Technician to join our Hardware Services Team of the largest IT Managed Services Provider (MSP) in Long Island. At Flexible Systems, we strive to add value to our clients by sharing our knowledge of technology. You will be working on a team responsible for supporting and maintaining the technology our clients use to run their businesses. The position requires you to travel to our client’s sites. Structured Cabling • Perform Cable installation including Data, Voice, Fiber, and Paging, • Termination, Labeling, Testing and Dressing of cabling, • Installation of Data Equipment including Racks, Patch Panels, Cable Trays, and J-Hooks, • Buildout of MDF/IDF Closets, • Rack and Stack of network devices as required in network closets, • Ability to perform repairs by troubleshooting existing cabling system issuesAccess Control, • Perform installation of Access Control Cabling, • Installation and final wiring of Access Control Boards, Readers, and REX Devices, • Ability to configure Users, Groups, Schedules, Doors, and Credentials via Access Control Software, • Experience with installation of Wireless and Electronic Locks a plusIP Surveillance, • Perform Cable installation for IP Cameras, • Physical installation of various CCTV camera types, • Install and Program DVR Recording Units, • Configure Analytics such as Face Detection and Recognition, People Tracking, Motion Detection, LPR, Intrusion and Perimeter ProtectionAdditional Skillsets, • Project Management, • Industry-specific Manufacturer and BICSI training and/or certifications a plus, • Ability to read Blueprints and Cable Schematics, • Networking knowledge of Routers and Switches sLozS7bY9q

Job DescriptionDescription: Metro Physical & Aquatic Therapy is a comprehensive multidisciplinary company who offers Physical, Occupational, Speech Therapy, Massage and Acupuncture services. We take great pride in inspiring our team to create an everlasting bond with our patients, our doctors, and our community. But it’s not just what we do, it’s who we are. We are driven by our mission to continually invest in our people and offer the best workplace environment possible. Metro Physical & Aquatic Therapy has immediate opening for a Clinic Support Associate! Come be a part of a growing organization in a progressive, supportive, and innovative team! Are you looking for an exciting opportunity in a fast-growing industry? Do you want to make a difference in people's lives while you grow your career? Are you interested in delivering compassion, excellence, and reliable service to patients? We want you to apply your energy and skills t become an integral part of a caring, professional team that provides the highest quality care to our patients. Days & Hours: Monday/Wednesday 930am-6pm, Tuesday/Thursday 9am-530pm, and Friday 830am-5pm Essential Functions: • Welcomes patients and visitors with an upbeat attitude and a warm and inviting smile - in person or on the telephone; answering or referring inquiries., • Demonstrate a high level of customer service at all times. Patient’s satisfaction, provider time, and treatment room utilization by scheduling appointments in person or by telephone., • Generate a compilation of reports, logs and lists including but not limited to authorization and verifications with a high level of accuracy., • Ensure co-pays are tallied and reconciled and control credit extended to patients., • Call treating physicians to obtain updated prescriptions for treatment by Occupational and Physical Therapists., • Obtains Plan of Cares from treating physician and update system., • Set up a new /returning patient case in Theraoffice which includes obtaining new demographic information and all existing insurance information., • Keeps patient appointments on schedule by notifying Clinicians of patient’s arrival; reviewing service delivery compared to schedule; reminding provider of service delays., • Ensures availability of treatment information by filing and retrieving patient records., • Maintains business office inventory and equipment by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies; scheduling equipment service and repairs., • Maintains a working knowledge of Metro, rules and policies, and works to ensure the compliance with the stated parameters. Perform other duties and assignments as required., • Maintains strictest confidentiality; adheres to all HIPAA guidelines/regulations., • Perform other duties and assignments as required. Serve as a scribe for recording and editing therapeutic exercises under the supervision of a Doctor of Physical Therapy and/or Occupational Therapy, • Helps treat patients by preparing heat and ice packs; paraffin dips; assisting patients to the pool; guiding patients to exercise equipment, monitoring motion; tracking patient physical exertion levels; guiding patients through prescribed exercises and strengthening techniques., • Ensures operation of treatment equipment by completing preventive maintenance requirements; following manufacturer's instruction; troubleshooting malfunctions; calling for repairs., • Educates patients by demonstrating proper use of equipment and exercise routines., • Prepares patients for therapy treatment by welcoming, comforting, providing, and/or assisting patients into therapy sessions., • Provides information to patients by answering questions and requests; allaying fears., • Maintains patient confidence and protects operations by keeping information confidential., • Maintains a safe and clean working environment by complying with procedures, rules, and regulations., • Provides equipment and supplies by sterilizing and delivering equipment and supplies to the treatment area; positioning equipment for therapist access; positioning patients on equipment., • Prepares treatment room for patients by following prescribed procedures and protocols., • Answers calls from physician offices, hospitals, and patients using exemplary customer service skills., • Maintains physical therapy supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies., • Provide front desk coverage as needed; this includes answering calls from physician offices, hospitals and patients, and assisting with scheduling., • Performs other duties and assignments as required.Requirements:, • One (1) year of Physical Therapy/Medical office experience, • Experience with a EMR System a plus, • Ability to communicate to customers, co-workers and management in a professional/courteous manner., • Current or recent experience in a medical practice assuring compliance with federal, state and local regulations and guidelines., • Must work well within a team environment., • Excellent interpersonal and communication skills, • Proficiency in the Google Suite platform and ability to learn new programs quickly., • One year of experience in a customer service-oriented is strongly desired., • High school diploma or GED is required. Knowledge of the equipment used in therapy work., • Knowledge of the behavior and needs of patients., • Knowledge of proper strengthening techniques., • Knowledge of the use of restraints and aggressive behavior management practices., • Ability to successfully complete in-service training., • Ability to observe, evaluate, and record conditions, reactions, and changes in patients' physical condition., • Ability to maintain appropriate attitude and conduct necessary to the welfare of patients., • Ability to create and maintain records and write brief reports., • Ability to communicate effectively.

Job Description Narda MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The RF/microwave Amplifier Design Engineer is an experienced professional with the capability to design discrete transistor and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies. Able to synthesize and develop new amplifier components using CAE analysis tools and has hands-on bench troubleshooting and test skills. The individual effectively communicates with contacts inside and outside of own department, customers, and suppliers. Recommends enhancements to systems and processes. Possesses practical project management skills and will work under general supervision to achieve technical performance while meeting schedule and cost operational targets for specific programs and projects with moderate impact on departmental results. Essential Functions: • Design, develop, test and support production of discrete and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies., • Conceptualize and develop new RF and microwave circuits, packages, and products., • Perform linear and nonlinear circuit simulations of microwave active and passive circuits., • Provide direction on hi-reliability specifications, i.e., the screening and testing for our products to be compliant., • Develop specifications for microwave components and subassemblies., • Generate design review presentations and test reports., • Design for ease of manufacturing., • Estimate and track project schedules and labor for engineering developments., • Bachelor’s Degree in Electrical Engineering and a minimum of 4 years prior relevant experience or a Graduate Degree and a minimum of 2 years prior related experience., • A minimum of 2 years designing and simulating low noise amplifiers., • Experience designing RF/Microwave passive components, e.g., couplers, power dividers and attenuators., • Ability to manage projects and interface to other areas., • Experience designing products for manufacturing., • Proficient in linear CAE and experience with non-linear CAE., • Ability to work under a microscope in a clean room environment to test and tune circuits., • Experienced user of microwave test equipment; including network analyzers, noise figure analyzers, spectrum analyzers, power meters and signal generators., • Familiarity with device semiconductors, such as GaAs and GaN., • Ability to gain Secret Level Security Clearance., • Familiarity with MIL specifications, such as MIL-PRF-38534 and MIL-STD-202., • Hands-on experience testing and aligning fine pitch circuits under a microscope., • Design experience with oscillators, synthesizers, and PIN diode circuits., • Knowledge/application of filter synthesis and design., • System analysis experience comprising both cascade and spur analysis., • Proficient use of Keysight ADS, Keysight RFPro, and/or Ansys HFSS simulation tools., • Perform EM simulations of microwave housings, boards, transitions, and passive circuits., • Use of CAD tools such as AutoDesk Inventor and AutoCAD., • Design/test experience of circuits operating through 26GHz is favored, with operation up through 40GHz further preferred., • Experience with both chip and wire hybrid and PCB surface mount manufacturing methods., • 401k, • Health/Dental/Vision insurance, • Life Insurance, • Paid time off, • Tuition Reimbursement Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.