Troubleshooting jobs in Buffalo, New YorkCreate job alerts

What you will do Perform new installation commissioning and service activities on large scale, various manufacturers, Access Control, CCTV, Intrusion alarm and IP Intercom systems. How you will do it • oversee and inspect the installation of equipment to meet customer expectations and manufacturer specifications. Field coordination and communication, system programming, commissioning, AHJ testing and training on new system installations, • Evaluate and diagnose equipment that requires servicing as well as troubleshooting potential field wiring problems, • Provide specific solutions and recommendations to customers on the most efficient and cost effective method in restoring a specific system back to normal condition, • Manage assigned Electronic Systems service requests in regards to field labor hours estimated, • Customer satisfaction through coordination, response to customer requests and problems and clear communication skills, • Prepare reports on daily activities, • May be required to work minimal overtime as the work requires, • Read and understand complicated blueprints, diagrams, schematics, submittals, software/system programs, and operation/product manuals, • Required to lift and or carry equipment and tools, which may be over forty (40) pounds Working environment may involve climbing ladders and scaffoldings with equipment, upwards to forty (40) feet Capable of working in cramped workspaces such as ducts, crawl spaces, above ceilings, etc., • Must adhere to all OSHA and JCI safety policies and procedures, • Complete timesheets, mileage reporting and monthly vehicle reports in a timely manner What we look for Required • 5+ years’ experience with installation and service of fire alarm, access control, CCTV, intrusion and intercom systems. Knowledge of IP based systems required., • Demonstrate working knowledge of electricity and electronics In addition, demonstrate an aptitude for troubleshooting systems and performing necessary repairs, • Security experience with Access Control Systems as well as CCTV Systems required., • Ability to effectively work independently, • Demonstrate a high level of customer service, • Be able to carry and move equipment/tools weighing up to 40 pounds, • Minimum high school/trade school graduate, military, or two year Associate degree in a technical field involving electronics and/or computer based systems., • Working knowledge of personal computers (Windows 7 and later) and Microsoft's suite of Office software, • Working knowledge of IT network systems. Working understanding of IP based protocols., • Ability to use hand and power tools and test equipment such as multi-meters, oscilloscopes, digital analyzers, battery analyzers, frequency meters, decibel meters and communication devices as required, • Excellent verbal and written communication skills, • Ability to read and understand complex building architectural, mechanical and electrical documents, as well as project plans, specifications, schedules and equipment installation/operation/troubleshooting manual., • CCURE 9000 certification preferred but other certifications acceptable.

Job Description Help Build the Future of Sustainable Insulation At CleanFiber, we manufacture high-performance cellulose insulation that helps homes and buildings stay energy efficient. We’re not just making insulation, we’re making a difference for the planet and for our community. If you want steady, rewarding work in a growing company with room to advance, this is your opportunity. Now Hiring: Manufacturing Associates – All Shifts Available Location: Buffalo, NY – CleanFiber Buffalo Facility Shifts: A Shift – 7:00 AM – 7:30 PM – Every Sun, Mon, Tues & E/O Wednesday B Shift – 7:00 PM – 7:30 AM – Every Sun, Mon, Tues & E/O Wednesday C Shift – 7:00 AM – 7:30 PM– Every Thurs, Fri, Sat & E/O Wednesday D Shift – 7:00 PM – 7:30 AM– Every Thurs, Fri, Sat & E/O Wednesday What You’ll Do As a Manufacturing Associate, you’ll be part of a high-energy production team making our innovative, eco-friendly insulation. No prior manufacturing experience? No problem – we provide paid on-the-job training. You’ll: • Operate and monitor production equipment., • Feed raw materials into machines safely and efficiently., • Perform basic troubleshooting and minor equipment maintenance., • Follow safety procedures and keep your workspace clean and organized., • Move materials with forklifts, pallet jacks, or by hand., • Dependable and safety-focused, with a strong work ethic., • Ability to stand, walk, bend, and lift up to 30 lbs during your shift., • Comfortable working in a dusty, noisy environment with varying temperatures., • High school diploma or equivalent preferred., • Competitive pay plus overtime opportunities., • Shift Differentials range from $2.00 - $5.00 hour, • Quarterly Bonus Program, • Full benefits package (health, dental, vision, 401k)., • Paid training and safety gear provided., • Be part of a fast-growing, mission-driven company. Equal Opportunity Employer CleanFiber Inc. is an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, color, sex, age, national origin, religion, sexual orientation, gender identity or expression, veteran status, disability status, or any other protected classification under federal, state, or local law.

Job DescriptionAutomotive Technician - A/B/C Skilled Level Paddock Chevrolet, nominated as 2025 Best Places to Work finalist. Paddock Chevrolet has immediate openings for skilled Automotive Technicians. At Paddock Chevrolet we strive to make every customer a customer for life. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Every employee at Paddock Chevrolet is absolutely critical to its success. Our promise is to keep delivering the same fantastic service and value that our community has come to expect from our dealership through the years. Benefits * Health, Vision and Dental Insurance * 401K Plan * Life Insurance * PTO + sick days * Paid training * Growth opportunities The Technician is responsible for performing vehicle repair and maintenance work: * Perform work specified on the repair order with efficiency and in accordance with dealership * Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment. * Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. * Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs. * Execute repairs under warranty to manufacturer specifications. Pay is based on A Rate - $50.88 per hour B Rate- $38.15 per hour or C Rate- $31.55 per hour Plus extra $10.00 per hour for warranty work Qualifications * 2+ years of Service Technician experience preferred * High school diploma or equivalent, ASE Certification required * B level qualifications, including Diagnostic, Electrical and Engine Repair * Dexterity, requiring a steady hand, excellent hand-eye coordination * Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment * Excellent customer service skills and basic computer competencies * Positive, friendly attitude, along with an eagerness to improve * Enjoy working in a dynamic environment * Teammate with the ability to collaborate with others effectively * Ability to learn new technology, repair and service procedures and specifications * Valid driver's license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws

Job DescriptionAutomotive Technician - A/B/C Skilled Level Paddock Chevrolet, nominated as 2025 Best Places to Work finalist. Paddock Chevrolet has immediate openings for skilled Automotive Technicians. At Paddock Chevrolet we strive to make every customer a customer for life. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Every employee at Paddock Chevrolet is absolutely critical to its success. Our promise is to keep delivering the same fantastic service and value that our community has come to expect from our dealership through the years. Benefits * Health, Vision and Dental Insurance * 401K Plan * Life Insurance * PTO + sick days * Paid training * Growth opportunities The Technician is responsible for performing vehicle repair and maintenance work: * Perform work specified on the repair order with efficiency and in accordance with dealership * Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment. * Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. * Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs. * Execute repairs under warranty to manufacturer specifications. Pay is based on A Rate - $50.88 per hour B Rate- $38.15 per hour or C Rate- $31.55 per hour Plus extra $10.00 per hour for warranty work Qualifications * 2+ years of Service Technician experience preferred * High school diploma or equivalent, ASE Certification required * B level qualifications, including Diagnostic, Electrical and Engine Repair * Dexterity, requiring a steady hand, excellent hand-eye coordination * Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment * Excellent customer service skills and basic computer competencies * Positive, friendly attitude, along with an eagerness to improve * Enjoy working in a dynamic environment * Teammate with the ability to collaborate with others effectively * Ability to learn new technology, repair and service procedures and specifications * Valid driver's license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws

Job Description Company Profile: Anderson Equipment Company is one of the largest heavy equipment distribution companies in the Northeast. It is a family-owned, private company that has consistently grown and achieved financial success for almost 90 years. Currently in its third generation of family ownership and management, the company spans six states – West Virginia, Pennsylvania, New York, New Hampshire, Vermont, and Maine with 19 branch locations. Job Description Summary: Apprentices are part of the company’s special development training program. Employees in this class are expected to successfully complete training assignments during their first two years with the Company. To reinforce concepts covered during training, the employee is expected to perform the following tasks: • Individually complete basic equipment maintenance., • Assist other Service Technicians in more complicated repairs., • Perform unskilled work such as:, • Loading and unloading machinery., • Completing check in and check out procedures., • Fueling equipment., • Steam cleaning machines. During the apprentice program, the employee must develop proficiency in basic electronics, hydraulics and troubleshooting by successfully completing company provided training classes. Required Qualifications: • High school diploma;, • Basic familiarity of equipment operations, mechanical functions, electrical and hydraulic systems considered a plus;, • Initially, the Apprentice will have minimal technical skills but has demonstrated a sincere interest in Anderson Equipment and the construction equipment industry during the recruiting process., • During the apprentice program, the employee must develop proficiency in basic electronics, hydraulics and troubleshooting by successfully completing company provided training classes. Compensation and Benefits: • Compensation depends on location, experience/skills, overtime: $20.75-$27.00 per hour., • Benefits include Medical and Prescription Drugs, Dental, Vision, Life Insurance, STD, LTD, Heath Savings Account, Employee Assistance Program, Paid Time Off (PTO)., • Retirement Savings is a 401K Plan with Match and Profit Sharing contributed by the Company., • Service Apprentices are eligible for Anderson Equipment’s Tool Allowance program., • The Company supports professional development through career advancement opportunities, transfers to other branch locations, tuition reimbursement, and company-sponsored training programs.

Job Description We are currently seeking a Tire/ Auto Technician to become an integral part of our team! You will diagnose, adjust, repair, automotive vehicles. We sell a fair amount of tire as well ,so knowledge in this area would be preferred Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide estimates for automotive repairs, • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Familiarity with alignments Pay is commensurate on experience Company DescriptionWe opened 10yrs ago and have grown every year and now we are looking for someone to help us grow even moreWe opened 10yrs ago and have grown every year and now we are looking for someone to help us grow even more

Job Description Technical Source is looking to hire a Test Technician for our client who specializes in manufacturing aseptic processing equipment for the Life Sciences industry in Buffalo, NY. The qualified candidate will have experience in mechanical and electrical testing of automated equipment Responsibilities of a Test Technician include: • Perform mechanical and electrical testing on systems and equipment, • Calibrate instruments and equipment required for testing procedures, • 3+ years' experience in electrical and mechanical system testing and troubleshooting, • $60,000- $73,000 based on experience and fit, • Competitive pay with bonus and employee benefits including 100% healthcare coverage for employee and family

Job DescriptionTest Technician Title: Test Technician Location: Tonawanda, NY Position Overview We are seeking a skilled Test Technician to join our team. The primary objective of this role is to ensure the quality and functionality of our industrial equipment through rigorous testing and evaluation. The successful candidate will be responsible for the commissioning, installation, and maintenance of various systems while providing technical support and troubleshooting assistance. Key Responsibilities • Conduct tests on industrial equipment to ensure compliance with specifications and performance standards., • Assist in the commissioning and installation of new equipment and systems., • Perform routine maintenance and troubleshooting on existing equipment to ensure optimal performance., • Read and interpret mechanical and electrical drawings to understand system layouts and functions., • Document test results and generate reports for review by engineering and management teams., • Proven experience as a Test Technician or similar role in an industrial setting., • Strong knowledge of industrial equipment commissioning, installation, and maintenance., • Familiarity with PC and PLC systems and their applications in testing environments., • Ability to read and interpret mechanical and electrical drawings accurately., • Excellent problem-solving skills and attention to detail. -Incredible health benefits -Bonus -Overtime -PTO package • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 09/23/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Join our team as a Test Technician and bring your mechanical and electrical skills to the next level! Location: Tonawanda, NY Pay Rate: $60K-$73K(Based on experience) - Up to $85K for engineering graduates Position Type: Full-Time, Permanent This role is primarily based in our on-site testing facility; however, it requires up to 25% travel. Typically, this includes weekly visits to customer installation sites to support equipment testing, troubleshooting, and commissioning. Travel is planned and coordinated in advance to ensure minimal disruption to in-shop responsibilities. What You’ll Do: • Provide support to the Test Supervisor during machine testing activities, • Guide junior test technicians in procedures and troubleshooting, • Perform mechanical and electrical testing on systems and equipment, • Calibrate instruments and equipment required for testing procedures, • Record, document, and maintain test data; support ISO 9000 documentation as needed, • Identify and correct faulty components and test failures, • Detect and resolve software-related malfunctions, • Contribute to the continuous improvement of equipment quality, • Verify that nameplates, safety labels, and documentation are correctly applied, and that the equipment is ready for shipment, • Support the Project Manager during customer visits and operational training sessions, • Ensure that all testing procedures are completed in accordance with defined quality requirements, • Associate degree in electrical or mechanical engineering with 3–5 years of relevant experience, or 5–10 years of hands-on technical experience, • Experience with electrical systems, controls, and software troubleshooting, • Strong communication skills and ability to work effectively with customers and shop personnel, • Excellent organizational skills and the ability to communicate clearly, both verbally and in writing, • Familiarity with ISO 9000 standards and documentation processes, • Experience supporting customer-facing training or demonstrations, • Experience with refrigeration systems, • Experience with validation and testing procedures for complex industrial equipment ABOUT US: PrideNow is Pride Global's light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with the overarching mission of Pride Global, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. As part of the Pride Global family, we bring forth a commitment to excellence and a comprehensive approach to meeting the unique staffing needs of our clients worldwide. Welcome to PrideNow, where our local expertise seamlessly integrates into the global excellence of Pride Global, shaping a future of dynamic workforce solutions. BENEFITS DISCLOSURE: Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job Description Test Technicon Job Summary The Test Technician supports machine testing activities under the direction of the Test Supervisor. This role includes mentoring junior technicians, performing mechanical and electrical tests, calibrating instruments, troubleshooting hardware and software issues, and documenting results in compliance with ISO 9000 standards. The technician ensures equipment meets all quality, safety, and documentation requirements prior to shipment, contributes to continuous improvement efforts, and assists Project Managers with customer visits and training sessions. Skills & Experience * Associate degree in Electrical or Mechanical Engineering with 3–5 years of relevant experience, or 5–10 years of hands-on technical experience. * Proficiency in electrical systems, controls, and software troubleshooting. * Strong communication and organizational skills; effective with both customers and shop personnel. * Ability to work independently with minimal supervision. * Willingness to travel 10–20%, including occasional international travel. * Familiarity with ISO 9000 standards and documentation. * Experience supporting customer training and demonstrations. * Background in refrigeration systems preferred. * Knowledge of validation and testing for complex industrial equipment. * Commitment to product quality and process improvement. It is the policy of GCR to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. GCR is an Equal Opportunity/Affirmative Action Employer and embraces diversity in our employee population. Company DescriptionGCR is a national technical recruiting firm. We specialize in contract, contract to hire, and permanent staffing solutions across a variety of industries including, Information Technology, Commercial, Automotive, Semiconductor, Medical Device, Pharmaceutical, Manufacturing, and Defense.GCR is a national technical recruiting firm. We specialize in contract, contract to hire, and permanent staffing solutions across a variety of industries including, Information Technology, Commercial, Automotive, Semiconductor, Medical Device, Pharmaceutical, Manufacturing, and Defense.

Job Description Test Technician Location: Tonawanda, NY Salary: $60,000 – $73,000/year Job Summary: We are seeking a skilled Test Technician to support machine testing activities and ensure equipment meets the highest quality standards. In this role, you will work closely with the Test Supervisor, guide junior technicians, and perform both mechanical and electrical testing on complex systems. You will also troubleshoot issues, calibrate instruments, and maintain accurate testing documentation in compliance with ISO 9000 requirements. Responsibilities: • Assist the Test Supervisor during machine testing and troubleshooting., • Guide and mentor junior test technicians in proper procedures., • Perform mechanical and electrical testing on equipment and systems., • Calibrate instruments and testing equipment., • Record and maintain test data; support ISO 9000 documentation., • Diagnose and repair faulty components, test failures, and software malfunctions., • Verify that all nameplates, safety labels, and documentation are correctly applied., • Ensure readiness of equipment for shipment., • Support Project Managers during customer visits and operational training., • Complete testing procedures in accordance with defined quality requirements., • Associate degree in electrical or mechanical engineering with 3–5 years of experience, or 5–10 years of hands-on technical experience., • Experience with electrical systems, controls, and software troubleshooting., • Strong communication and interpersonal skills to work effectively with customers and shop personnel., • Excellent organizational skills and attention to detail., • Familiarity with ISO 9000 standards and documentation processes., • Experience providing customer training or demonstrations., • Background in refrigeration systems., • Experience with validation and testing procedures for complex industrial equipment., • Interest in improving product quality and optimizing testing processes.

Job Description Join our team as a Test Technician and bring your mechanical and electrical skills to the next level! Location: Tonawanda, NY Pay Rate: $60K-$73K(Based on experience) - Up to $85K for engineering graduates Position Type: Full-Time, Permanent This role is primarily based in our on-site testing facility; however, it requires up to 25% travel. Typically, this includes weekly visits to customer installation sites to support equipment testing, troubleshooting, and commissioning. Travel is planned and coordinated in advance to ensure minimal disruption to in-shop responsibilities. What You’ll Do: • Provide support to the Test Supervisor during machine testing activities, • Guide junior test technicians in procedures and troubleshooting, • Perform mechanical and electrical testing on systems and equipment, • Calibrate instruments and equipment required for testing procedures, • Record, document, and maintain test data; support ISO 9000 documentation as needed, • Identify and correct faulty components and test failures, • Detect and resolve software-related malfunctions, • Contribute to the continuous improvement of equipment quality, • Verify that nameplates, safety labels, and documentation are correctly applied, and that the equipment is ready for shipment, • Support the Project Manager during customer visits and operational training sessions, • Ensure that all testing procedures are completed in accordance with defined quality requirements, • Associate degree in electrical or mechanical engineering with 3–5 years of relevant experience, or 5–10 years of hands-on technical experience, • Experience with electrical systems, controls, and software troubleshooting, • Strong communication skills and ability to work effectively with customers and shop personnel, • Excellent organizational skills and the ability to communicate clearly, both verbally and in writing, • Familiarity with ISO 9000 standards and documentation processes, • Experience supporting customer-facing training or demonstrations, • Experience with refrigeration systems, • Experience with validation and testing procedures for complex industrial equipment ABOUT US: PrideNow is Pride Global's light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with the overarching mission of Pride Global, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. As part of the Pride Global family, we bring forth a commitment to excellence and a comprehensive approach to meeting the unique staffing needs of our clients worldwide. Welcome to PrideNow, where our local expertise seamlessly integrates into the global excellence of Pride Global, shaping a future of dynamic workforce solutions. BENEFITS DISCLOSURE: Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job DescriptionPower-Flo Technologies is seeking to hire a full-time laborer that can support our pump and motor repair shop in Buffalo, NY. Laborer Responsibilities Assist with the following: • Disassemble pumps and electric motors to determine cause of failure and what is required to repair., • Install replacement bearings, seals, shafts, and gaskets on various equipment., • Troubleshoot pump systems in the field using a multimeter., • Make repairs in the field to pumps, motors, and fans., • Use power tools, hand tools, and multimeter to repair pump system in the field., • Work with a helper to complete repair jobs both in shop and on the road., • Replace and wire electric motors at job sites., • Perform troubleshooting of pump sets and simple controls (motor starters). Laborer Necessary Qualifications • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Experience using all types of mechanics tools., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Ability to troubleshoot problems and independently repair., • Knowledge of alignment techniques., • Ability to troubleshoot systems in house and in the field., • Familiar with the installation, service, and maintenance of various pumps and motors., • A plus if familiar with submersible pumps, close-coupled pumps, frame mount pumps, split case pumps, AC motors, etc., • A valid and clean driver's license to operate company vehicles as needed Physical Requirements : • Ability to stand for up to 8 Hours., • Ability to lift 50 pounds., • Ability to work on elevated platforms., • Ability to climb ladders., • This position may require standing, stooping, bending, kneeling, crouching and/or reaching., • You may be exposed to dust, loud noises, and hot and cold conditions., • Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $15.50 - $18/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionSalary: $28.00/hr to $35.00/hr depending on experience CSI Sands (N.E.)operates state of the art processing facilities to produce industrial silica sand products in Brevort, MI, Buffalo, NY and Cleveland, OH. We are currently searching for a Maintenance Technician to complement our team in Buffalo, NY. Reporting to the Buffalo Plant Maintenance Manager, the Maintenance Technician will be responsible for: • Abiding by and enforcing compliance with safety rules, policies, and procedures., • Repairing, maintaining, installing production equipment., • Troubleshooting machine problems and making necessary repairs., • Performing preventive maintenance following standards and schedules on scales, equipment and conveyors. This includes lubrication, adjustments, and cleaning., • Recommending improvements and modifications to production equipment and machines., • Maintaining equipment repair history records., • Determining the cause of breakdowns and providing improvement recommendations to reduce downtime and costs., • Performing general plant maintenance duties., • Other duties as assigned. Skills and Requirements: Minimum 2 to 5 years solid experience as a Mechanical Technician. Experience in a manufacturing or industrial setting is preferred. Must have own tools and vehicle. Ability to read and understand drawings, blueprints, and schematics. Ability to organize, plan daily tasks, and make decisions with minimal supervision. Ability to utilize the Microsoft Office suite. The hours of work will be flexible with weekends and nights as based on business needs. We encourage all who are qualified and interested to apply in confidence; however, only those in consideration will be contacted.

Job DescriptionDescription: #ComeJoinTheFun as a Maintenance Technician and contribute to #MakingCandyFun We are seeking Maintenance Technicians on 2nd Shift up to $38/hr to start! The ideal technician will perform routine and preventive maintenance to install, maintain, and disassemble machines, machinery parts, and mechanical equipment. Compound Development Solutions, Inc/RM Palmer Company, LLC designs, produces, packages, and ships seasonal chocolate novelties. Our products include filled chocolates, solid chocolates, chocolate bars and balls, chocolate cups and coins, chocolate patties, and seasonal products. In addition to their own branded products, the Company co-manufactures both seasonal and everyday products for other large branded companies. Today, the Company operates out of two manufacturing facilities and one distribution facility with ~600 full-time employees. R.M. Palmer Company, LLC has some of the most differentiated manufacturing capabilities in the industry as one of the only companies in the U.S. able to make hollow molded chocolate candy products and multicolor chocolate candy novelties. Maintenance Technician Details: • 2nd Shift Schedule: Monday-Friday 3pm-11pm, • Competitive rates and comprehensive benefits package, • Utilize knowledge of mechanical, electrical, and electronics systems to repair and maintain sitewide electrical, mechanical, and electromechanical equipment and processes, including troubleshooting problems when operators report issues with their equipment., • Respond to production needs and troubleshoots machines and machine/line control systems, performs repairs and preventative maintenance on production and non-production equipment. Provides both production and maintenance supervision with timely follow-up communication on repairs., • Responsible for completing all daily, preventative, and predictive maintenance activities as assigned with regards to food safety and the reduction of equipment failures., • Work with other members of Maintenance to contribute improvements to/update all PM procedures., • Work with other members of Maintenance to prioritize maintenance jobs, help collect and analyze downtime information, gives input on all maintenance opportunities to improve plant operations., • Operate standard maintenance tools such as power tools, basic hand tools, electric tools, precision maintenance tools, preventative maintenance tools, etc., • Utilize and work with maintenance trades and components such as electrical, welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, hydraulic, pneumatic, and combustion systems., • Troubleshoot, modify, and install equipment by reading and comprehending electrical/mechanical schematics, blueprints, and/or operation manuals., • Document completed work and the conditions found utilizing maintenance computer software as necessary., • Interact regularly with peers and management to pursue continuous improvement of facility operations and promote a teamwork focused environment., • Operate forklifts, loaders, scissor lifts, aerial lifts and other mobile equipment., • Understand and adhere to all safety policies and procedures., • Maintain a safe and clean work environment., • Other duties as assigned.Requirements:, • Prior education or experience with electrical and mechanical equipment maintenance and repair., • 2 year technical degree or Associate degree in Industrial Maintenance and/or equivalent combination of education and experience., • 2 – 3 years as a maintenance technician or similar role, preferably in a manufacturing, industrial, or commercial setting., • Strong knowledge of mechanical, electrical, plumbing, and HVAC systems., • Ability to diagnose and troubleshoot problems efficiently and perform effective repairs., • Proficient in reading technical manuals, blueprints, and schematics., • Excellent communication skills and the ability to work collaboratively with team members and other departments., • Strong attention to detail and organizational skills., • Previous experience CMMS system is a plus., • Food manufacturing experience is preferred.

Job Description About NovaSource NovaSource Power Services is the world’s #1-ranked solar operations and maintenance (O&M) provider and insight-driven total asset optimization partner for renewables asset owners ready to fuel smart growth. With over 20 years of operating experience and a presence on 5 continents, NovaSource has the global reach and strategic capabilities to achieve our clients’ renewables goals around the world. NovaSource’s comprehensive approach to total asset optimization in addition to O&M services includes value engineering, performance analysis, strategic supply chain management, and advanced monitoring systems. The company operates in key global markets managing over 30GW of solar power plants. NovaSource’s expertise extends beyond solar and includes battery energy storage systems (BESS), offering a complete suite of services for the evolving renewable energy landscape. Basic Job Functions: The Battery Energy Storage System (BESS) Technician is responsible for the safe and efficient operation, maintenance, and troubleshooting of utility-scale energy storage systems. This role supports system uptime and performance through scheduled maintenance, real-time fault response, and root-cause diagnostics of electrical and control systems. Working closely with site operations, OEMs, and remote monitoring teams, the technician ensures reliable system performance across components such as inverters, battery modules, fire suppression, HVAC, and SCADA. This is a field-based, hands-on role ideal for those with strong technical skills, a safety-first mindset, and an interest in contributing to the clean energy transition. Experience: • 1 year of experience in a related position. Education: • High School Diploma or equivalent required., • College or technical degree preferred., • Electrical certifications, state, journeyman, etc. a plus., • Equivalent training in military, utility, or power industry a plus. Physical Requirements: • Bending, kneeling, twisting, the ability to lift up to 70 pounds, the ability to climb ladders, and wear PPE for extended periods of time. Ability to work in high and low temperatures, sun exposure, and navigate on uneven ground on foot., • Ability to differentiate between different colors to manage color-coded wiring., • Good hand-eye coordination. Required Skills/Competencies: • Understanding of electrical safety and arc flash standards., • Ability to follow operating, switching, maintenance, safety and environmental procedures., • Must have a safety background with experience in Lockout Tag Out and Job Hazard Analysis., • Knowledge of industrial or power facility operation and maintenance., • Knowledge of local and national electrical codes., • Basic understanding of Electrical schematics and prints., • Understanding of electrical principles., • With oversight, able to retrieve relay files and documentation., • Familiar with CMMS systems for maintenance tracking., • Proven computer skills in a Windows environment (Microsoft Office Products) is required., • Must demonstrate the ability to communicate in English both verbally and written., • Ability to manage multiple tasks and projects., • Self-directed and accountable, able to think critically about processes and issues., • Valid Driver’s License., • Perform to quarterly key performance indicators, such as actual versus expected energy generation, on-time planned maintenance, and support overall plant and equipment efficiency., • Ensure a safe work environment by strict adherence to company protocols., • Responsible for personal safety, quality and schedule adherence., • Learn, understand, and comply with Job Hazard Analysis, Pre-Job Brief and Lock-Out-Tag-Out procedures., • With supervision be responsible for a variety of PM work including measuring, reading, testing and performing maintenance procedures on all site components., • Communicate effectively and professionally with internal and external stakeholders., • Ensure CMMS work orders are complete in their entirety., • Prepare documents necessary for procurement and utilization of materials and vendor services., • Ensure all documentation and required reports are reviewed, complete, submitted and filed., • Attend, participate in and pass all assigned training in safety, environmental and other areas as assigned., • Maintain work area and site housecleaning to 5S standards., • Inspect and clean PV equipment at assigned location., • Verify SCADA site configuration., • Adhere to Company vehicle maintenance standards and safety standards., • Will report to most senior site manager or supervisor depending on site organizational structure., • Travel may be required depending on the needs of the Company. Office Physical Requirements: All positions in our office require interaction with people and technology while either standing or sitting. In order to best service our customers, internal and external, all associates must be able to communicate face-to-face and on the phone with or without reasonable accommodation. NovaSource is committed to compliance with its obligations under all applicable state and federal laws prohibiting employment discrimination. In keeping with this commitment, it attempts to reasonably accommodate applicants and employees in accordance with the requirements of the disability discrimination laws. It also invites individuals with disabilities to participate in a good faith, interactive process to identify reasonable accommodations that can be made without imposing an undue hardship. Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. US: Diversity Statement – Equal Employment Opportunity It is NovaSource’s policy to provide equal employment opportunity to all applicants and employees. NovaSource disapproves of, and will not tolerate, unlawful discrimination against any applicant or employee because of race, color, national origin or ancestry, gender (including pregnancy, childbirth, or related medical conditions), gender identity, age, religion, disability, family care status, veteran status, marital status, sexual orientation, or any other basis protected by local, state or federal laws.

Job Description Schedule Shift: Rotating Shifts Hours: (12-hour shifts) Generous shift differential pay for weekend and extended-hour coverage What You’ll Do: Equipment Maintenance & Troubleshooting Perform both scheduled and unscheduled maintenance on a wide variety of manufacturing equipment, including: • Electrical, mechanical, hydraulic, and pneumatic systems, • PLC and VFD-controlled equipment, • AC/DC motors and drives, • Industrial HVAC and blower systems, • Piping and plumbing infrastructure, • Troubleshoot and resolve issues in mechanical and process control systems to minimize downtime, • Execute preventive maintenance and equipment upgrades to maximize uptime, • Partner with Engineering and other teams to uncover and address root causes of failures, • Participate in daily shift handoff meetings and communicate key activities, • Support projects related to equipment upgrades, process improvements, and facility expansion, • Maintain a safe working environment by following OSHA and company safety standards What You Bring: Experience & Skills • 2+ years of hands-on maintenance experience in a manufacturing or industrial environment, • Solid understanding of troubleshooting and repairing electromechanical systems, • Experience with PLCs, HMIs, motors, drives, HVAC, and facility systems, • Familiarity with schematics, blueprints, and following SOPs, • Proven ability to work independently while collaborating effectively with others, • Forklift operation experience (certification a plus, or we’ll train you!), • Ability to lift 50+ lbs. and be on your feet throughout your shift, • High School Diploma or GED required, • Drivers License required, • Technical certification or training in Electro-Mechanical, Industrial Maintenance, Automation, or Electrical Systems preferred Nice-to-Haves: • Experience in the insulation, pulp & paper, or building materials industries, • Ability to read schematics, blueprints, and follow SOPs About CleanFiber: CleanFiber makes high performance cellulose building insulation from recycled corrugated cardboard boxes, using a unique and patented process. CleanFiber’s proven technology and accelerating business is poised to disrupt a fast-growing segment of the building insulation market, while rapidly building a highly-profitable business. Cellulose insulation wins customers from fiberglass because of greater energy efficiency, and from foam because of its much lower price point. CleanFiber makes highly efficient cellulose insulation from recycled corrugated boxes, allowing us to challenge incumbent players who are reliant on diminishing supplies of recycled newsprint. With successful execution at our first facility, we believe we are well-positioned to rapidly seize market share on a national scale. We are a game changer!

Job Description Welcome to Good Carbon Co., where we're not just reimagining the future-we're actively building it, one sustainable project at a time. Rooted in our commitment to both our clients and the communities we serve, we're pioneering the transformation of real estate into eco-friendly havens. From acquiring properties to crafting them into super energy-efficient residences, our work is driven by relentless innovation and purposeful problem-solving. At Good Carbon Co., we're more than a company-we're a movement of forward-thinkers, visionaries, and solution architects. And now, we're looking for someone like you to help us keep our spaces clean, welcoming, and ready to inspire. Position Summary The General Property Management Maintenance Technician is responsible for ensuring the proper maintenance, repair, and upkeep of rental properties under the management of the company. This role plays a critical part in maintaining tenant satisfaction, property value, and overall operational efficiency. The Maintenance Technician will report directly to the Maintenance Manager and collaborate closely with other team members. Responsibilities of the Maintenance Technician include but are not limited to the following: Key Responsibilities: Maintenance and Repairs: • Perform routine maintenance tasks such as plumbing, electrical, HVAC, and general repairs to ensure properties are in good condition., • Conduct regular property inspections to identify maintenance needs, safety concerns, and potential repairs., • Respond to after-hours emergency maintenance requests to address urgent issues such as leaks, power outages, and heating/cooling failures., • Develop and follow a preventive maintenance schedule to proactively address potential issues and extend the lifespan of property systems and equipment., • Communicate with tenants regarding maintenance requests, repairs, and scheduled maintenance activities., • Maintain accurate records of maintenance requests, repairs, and related activities., • Ensure that all maintenance activities are carried out in compliance with relevant safety regulations and standards., • Monitor and manage inventory of maintenance supplies and materials., • Maintain the exterior of properties, including landscaping, cleaning common areas, and addressing issues related to curb appeal., • High school diploma or equivalent; vocational training or certification in maintenance-related trades preferred., • Proven experience as a skilled maintenance worker or similar role, demonstrating proficiency in various maintenance disciplines., • Strong technical aptitude and troubleshooting abilities, with a keen eye for detail and precision., • Excellent communication, teamwork, and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders., • Flexible schedule and availability to respond to after-hours emergencies or weekend maintenance tasks as needed., • Commitment to safety, quality, and continuous improvement in all aspects of work., • Ability to work independently with minimal supervision, as well as part of a collaborative team environment. Good Carbon Co. is an equal opportunity employer and will not tolerate discrimination in employment on the basis of race, color, age, sex, sexual orientation, gender identity or expression, religion, disability, ethnicity, national origin, marital status, protected veteran status, genetic information, or any other legally protected classification or status. Good Carbon Co. is committed to maintaining a safe and compliant workplace. As part of our hiring process, all offers of employment are contingent upon the successful completion of a background check. This may include verification of employment history, education, criminal history, and other relevant background information, in compliance with applicable federal, state, and local laws, including the Fair Credit Reporting Act (FCRA) and New York State regulations. By applying to this position, you acknowledge that a background check may be conducted if you are selected for employment.

Job Seekers can review the Job Applicant Privacy Policy by clicking here () . Job Description : We are immediately hiring a Supply Chain Ops Specialist in Tonawanda, NY, for our Supply Chain Solutions division. Apply here today to speak with a Recruiter about the position and perks of joining our Ryder Ever Better Team. • Pay Type: Exempt / Salary paid Twice Per Month, • Annual Salary Pay: Target Salary is $52,000-$55,000 based on experience Here are a few of the many benefits when working with us: • Medical, Dental, Vision Benefits start at 30 Days, • 401 (K) Savings Plan with a company match, • Discounted employee stock purchase options, • Quality employee discounts that actually save you money on tools, cars, appliances, travel and more, • All major holidays paid and Paid time off within your first year May interact with carriers and/or the customer based on the complexity and scope of the account. All work is subject to review by location Ryder Corporate Process Owners such as Finance, Human Resources, Safety, Ops etc. Error could result in customer dissatisfaction, loss of inventory, loss of profit, safety or security incident. Essential Functions • Communicate daily/shift goals of facility and work group(s). Communicate and report plans to obtain operational goals., • Assist with and train hourly, SNE or other specialists, • Lead and initiate employees through in depth training and continuous review of employee understanding of policies, procedures and processes., • Decision Making for location activities to include but not limited to demand planning, supplier calls, customer interactions, specialized process troubleshooting, etc., • Support and aid in the development of system and process training for employees in the work group(s). Perform operational administrative functions to support location activities and / or customer, • Maybe used as a floater to complete all Supply Chain Ops Associate roles across multiple shifts, • Ability to effectively communicate in both verbal and written forms with employees, peers and management, • Strong organizational, follow-up and computer skills required, • Ability to work self-directed with minimal supervision, • Ability to manage individual performance and employee relations, • Ability to use sound judgement when information is incomplete or ambiguous, • Warehouse Management Systems (WMS) intermediate preferred, • Material Handling Equipment (MHE) intermediate required, • OSHA intermediate required, • H.S. diploma/GED, • One (1) year or more in logistics, warehouse or industry related field required, • One (1) year or more Previous supervisory experience preferred, • Warehouse Management Systems (WMS) intermediate preferred, • Material Handling Equipment (MHE) intermediate required, • OSHA intermediate required No We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire every day! Apply Here With Ryder Today Click here to see all Opportunities at Ryder: EEO/AA/Female/Minority/Disabled/Veteran li-post #indexempt #FB #LI-GM Job Category: Supply Chain Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate’s relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Salaried Minimum Pay Range: $52,000 Maximum Pay Range: $55,000 Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at or 800-793-3754. Current Employees : If you are a current employee at Ryder, please click here () to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here () . wd

Job Description Excellent career opportunity for skilled service electricians with experience in commercial, industrial, and residential electrical work. We perform quality work at notable projects throughout Western New York and offer the highest wages and full benefits, including: • Health insurance, • Dental and vision insurance, • Pension and profit sharing, • 401K, • Tool allowance program, • Performance bonuses, • Paid vacation and holidays, • A fully outfitted company provided van Requirements and skills: • 3+ years of electrical experience as an industrial and/or commercial electrician. 2+ years of service and troubleshooting experience., • Experience with commercial, industrial, and residential wiring methods and systems., • Experience in servicing, troubleshooting and repair of commercial, industrial, and residential electrical systems., • Understands and demonstrates the safe use of tools and equipment., • Actively listens and follows direction, • Possesses a high degree of problem-solving abilities, • Well organized

Job Description **Must reside in New York State and have an active New York State Respiratory licensure. Elevate Patient Care While Achieving Work-Life Balance! Are you ready to step away from the high-pressure hospital environment and into a rewarding career where you can prioritize patient care and enjoy a better work-life balance? At Health System Services (HSS), we understand the challenges of the fast-paced healthcare world and offer you the opportunity to make a meaningful impact without sacrificing your personal time. Join us as a fully remote Respiratory Therapist and become part of a compassionate team driven by our E.P.I.C. values—Empathy, Passion, Integrity, and Commitment. This full-time role offers a fulfilling mix of patient care and education, helping individuals manage their respiratory health while allowing you the flexibility to focus on what matters most to you. About the Position • Set neonatal to adult patients up on CPAP and BIPAP therapies remotely., • Provide instruction on use of equipment and education on respiratory disease state., • Schedule all patient equipment set ups, follow ups, mask refits, etc., • Keep detailed call logs of all phone communication, phone call attempts, and scheduled appointments., • Instruct patients thoroughly on use of all Respiratory Equipment., • Enter patient data into CPAP compliance tracking program., • Follow up on patient progress, work to increase patient compliance., • Assist with PAP patient management, including helping patients after initial setups with basic questions and troubleshooting., • Manage and adjust machines virtually (CPAP/BIPAP) as needed for patient comfort and compliance., • Handle patient phone calls about their respiratory devices, addressing questions on devices ranging from Oxygen concentrators to Ventilators., • Participate in vent patient management for established vent users, ensuring their ongoing needs are met., • Assist in same-day virtual discharges for BIPAP/CPAP patients in collaboration with the hospital services team., • Monitor incoming faxes for pressure changes and respond accordingly with necessary adjustments. What You Have to Offer • Graduation from an accredited Respiratory Therapy Program, required., • Respiratory Therapist license in New York state, required., • Experience with telehealth or remote patient monitoring preferred., • Excellent communication and technology skills., • Reliable high speed internet and private HIPPA compliant remote work environment., • Friendly, warm personality., • Motivated with a goal of becoming a long-term asset within the organization., • One year in DME, preferred. What You Get - Benefits That Go Beyond the Basics • Comprehensive Health Coverage - Medical, Dental, and Vision insurance to keep you and your family well, • Future-Ready Retirement Plan - 401K with 3% company contribution after one year and 1,000 hours worked, • Time to Recharge - Generous PTO, Vacation and 9 Paid Holidays, • Extra Support When You Need It - Short Term Disability (optional) and Company-Paid Long-Term Disability and Free Confidential Employee Assistance Program, • Education That Pays Off - Exclusive Tuition Reimbursement Program with Niagara University - save on master's degree programs, • Be Part of Something Bigger - Join an organization that values giving back through community programs Compensation • $28.00 - $34.00 per hour, dependent on experience Location • Remote, New York state residents only Shift • 8:30am – 5:00pm

Job Description Technical Source is looking to hire an Automation Engineer for our client who specializes in manufacturing aseptic processing equipment for the Life Sciences industry in Buffalo, NY. The qualified candidate will have experience in programming and troubleshooting of PLC based control systems in a manufacturing setting. Responsibilities of an Automation Engineer include: • Design, program, and troubleshoot Rockwell control systems and Allen Bradley PLCs, • Troubleshoot electrical and mechanical components of automated control systems (PLCs, HMIs, VFDs, Servo Drives), • 5+ years' experience programming and troubleshooting automated manufacturing equipment including extensive knowledge of PLCs, control panels, and instrumentation, • BSEE or equivalent required, • Experience working in a GMP setting a plus, • $80,000-$110,000 based on experience and fit, • Competitive pay with bonus and employee benefits including 100% healthcare coverage for employee and family

Job Description The Opportunity: We're delighted you've chosen LCR to assist you in finding your ideal professional match. We'll assist you in reaching, stretching, and realizing your full potential. Increase your chances of success by creating your own personalized professional path. Earn More with Market-Leading Compensation. And work in an environment that treats you like family and gives back to the community. A universe of possibilities awaits you. Let's get this party started! We are looking for courteous, professional Technical Support Representatives to represent our clients by providing first-rate phone service to their customers. The Customer Service Call Center Agent may handle a high volume of inbound or outbound calls and should strive to provide each caller with a positive experience. Customer Service Call Center Agents will listen to customers to understand why they are calling, address all inquiries, and provide an accurate and efficient response. Job Summary: We are searching for polite, professional Technical Support Call Center Agents to represent our clients professionally by providing remarkable service to their customers via phone. The Support Agent may handle a high volume of inbound or calls and should seek to create a positive experience for each caller. Technical Support Agents will listen to customers to understand the reason for their call, address all inquiries and provide an accurate and efficient response. Responsibilities: • Answer inbound calls and greet customers with energy and enthusiasm., • Assist callers with mobile devices. Troubleshooting devices., • Build lasting relationships with clients, customers, and other call center team members based on trust and reliability., • Understand and strive to meet or exceed call center metrics while providing excellent and consistent customer service., • Meet department productivity and quality standards., • Strive for first call resolution and take true ownership of customer needs and issues., • Communicate and follow instructions for one call customer resolution., • Deliver amazing customer service through effective and timely resolution of various customer inquiries and concerns., • Take an active role in educating customers about our clients products and services. Requirements: • Work from Home position, • Equipment Provided, • 1+ years of customer service experience required., • Must have at least 1 year of technical support experience with mobile phones., • HS Diploma or GED/equivalent., • Computer literacy and typing skills of 25 words per minute., • Self-motivated and able to adapt and comprehend changes in business processes or procedures. About Lehman Consulting and Recruiting Lehman Consulting and Recruiting has years of experience matching candidates with their perfect positions! At LCR, we understand just how competitive today’s job market is and have a proven track record of helping candidates turn their passions into a reality. Let us help you find your perfect match today! LCR is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description About the Role: The Mechanical position at our Tonawanda location within the Facilities Managment industry is focused on ensuring the optimal performance and reliability of mechanical systems and components. This role involves diagnosing, maintaining, and repairing mechanical equipment to support production and operational efficiency. The successful candidate will collaborate closely with engineering and production teams to troubleshoot issues and implement effective solutions. A key outcome of this role is to minimize downtime and enhance the longevity of mechanical assets through proactive maintenance and timely interventions. Ultimately, this position contributes to delivering high-quality products and services by maintaining the mechanical integrity of the facility's equipment. Minimum Qualifications: • High school diploma or equivalent with completion of a mechanical apprenticeship or technical training program., • Proven experience in mechanical maintenance, repair, and troubleshooting within a manufacturing or industrial environment., • Basic understanding of mechanical systems, hydraulics, pneumatics, and related tools and equipment., • Ability to read and interpret mechanical drawings, schematics, and technical manuals., • Associate degree or higher in Mechanical Engineering Technology or a related field., • Experience working in an engine manufacturing or automotive production environment., • Certification in mechanical maintenance or industrial machinery repair (e.g., Certified Maintenance & Reliability Technician)., • Familiarity with computerized maintenance management systems (CMMS) and diagnostic software., • Perform routine inspections and preventive maintenance on mechanical systems and machinery to ensure operational efficiency., • Diagnose mechanical failures and malfunctions using appropriate tools and techniques, and execute timely repairs., • Collaborate with engineering and production teams to identify root causes of mechanical issues and develop corrective actions., • Maintain accurate records of maintenance activities, repairs, and parts inventory to support operational transparency. The required skills enable the candidate to effectively perform mechanical diagnostics, maintenance, and repairs, ensuring equipment reliability and minimizing downtime. Proficiency in reading technical documents and schematics allows for accurate troubleshooting and repair planning. Strong problem-solving skills are essential for identifying root causes and implementing corrective measures efficiently. Preferred skills such as familiarity with CMMS and certifications enhance the ability to manage maintenance schedules and improve overall operational workflows. Additionally, communication and teamwork skills facilitate collaboration with cross-functional teams to support continuous improvement initiatives. 1st shift Monday - Friday 7:00am-3:0pm

Job Description Vitan Equipment & Buffalo Lift Trucks is looking for an experienced Forklift Technician to repair heavy equipment. You’ll service, diagnose, and maintain forklifts and material handling equipment—no two days are the same. Why You’ll Love It Here: • Top pay based on experience, • Company vehicle provided, • No weekends & flexible schedule, • PTO, medical, dental, vision, 401(k) with match, • Career growth in a stable, expanding company, • Commission opportunities to boost your earningsWhat You’ll Do:, • Diagnose and repair mechanical, electrical, and hydraulic issues, • Perform preventative maintenance to keep equipment in top shape, • Travel to customer sites—variety of work every day, • Ensure equipment is safe and meets standards, • Keep accurate records of work performedWhat You’ll Need:, • 2+ years’ experience in forklift or heavy equipment repair (electric, propane, diesel), • Strong troubleshooting skills, safety focus and customer orientated mindset cXx7969pxs

Job Description Overview CTG is seeking to fill an Infrastructure Analyst III opening for our client in Buffalo, NY. Location: Buffalo, NY Duration: 12 months Overview: The Infrastructure Analyst III will be responsible for completing activities related to complex installations, configuration, operation, and maintenance of systems hardware and software, along with related infrastructure. This role ensures adherence to organizational values, enabling staff and partners to effectively utilize technology. Primary Responsibilities: • Respond to and resolve help desk escalations based on previous incident outcomes., • Create trending information of system issues to support efforts to address identified problems through analysis., • Develop and document procedures for work order and request-based tasks., • Resolve identified technical incidents requiring advanced problem-solving; analyze and isolate issues effectively., • Utilize advanced diagnostic tools for troubleshooting technical issues., • Execute systems maintenance activities following Standard Operating Procedures (SOP), including patching, health checks, and operating system updates., • Schedule maintenance changes to mitigate operational risk., • Participate in project work as a member of cross-functional teams; lead the technical team within a project and contribute to design efforts., • Provide coaching to less experienced staff on processes and technologies., • Complete scheduled evening responsibilities., • Document and initiate procedures for maintenance tasks and other needs for reference., • Identify opportunities for automation or improvement of SOP and maintenance tasks to enhance efficiency., • Understand and adhere to the company’s risk and regulatory standards, policies, and controls, identifying risk-related issues for escalation to management., • Promote an inclusive environment that reflects the company brand., • Maintain internal control standards, ensuring timely implementation of internal and external audit points and addressing issues raised by external regulators. Supervisory/Managerial Responsibilities: This position may involve leading technical teams on projects and providing mentorship to less experienced staff. Education and Experience Required: • Minimum of 6 years of higher education and/or relevant work experience., • Experience in reading and understanding technical information., • Detail-oriented with strong written and verbal communication skills., • Proven ability to communicate technical information within a team and to management., • Bachelor’s degree in a technology-related field., • Minimum of 7 years of higher education and/or relevant work experience. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact the Recruiter Tana Stilloe at . Kindly forward this to any other interested parties. Thank you!

Job Description Job Title: Scientist, Production Reports To: Principal Scientist or Supervisor Position Location: Buffalo, NY FLSA Status (Exempt/Non-Exempt): Non-Exempt Position Summary: Individuals serving in this position will be working in both manufacturing, product development, and QC testing at the ZeptoMetrix business unit. Employees will be trained in a variety of lab techniques specific to the department assigned as well as document generation and completion. Key Responsibilities: • Execution of quality system procedures, • Proper execution of SOPs and work instructions for manufacturing procedures assigned by supervisor, • Ability to work individually as well as part of a team towards completion of specific projects, • Use of manufacturing related equipment as required by work instructions and SOPs, • Data analysis, • Demonstration of sound problem-solving skills and troubleshooting abilities, • Adherence to quality systems with special regard to FDA, ISO 13485 and GMP / OSHA compliance, • QC testing of components and finished products, • Inventory management of materials and supplies, • Focus on continual process improvement, • Cleaning and maintenance of equipment, • Guided experimental design and product testing assigned by supervisor, • Preparation of reagents, media, and buffers, • Performs other duties as assigned Candidates will participate in one of our following Departments. Department Specific Potential Duties: Immunology • Test kit assembly including dispensing and product labeling Virology • Use of aseptic technique in a Biosafety Cabinet to perform cell culture, viral infections, harvests, processing, and QC testing for the manufacture of products from raw materials and cell culture components., • Proper use of PPE and safety protocols in BSL-2 and BSL-3 containment laboratories. Bacteriology • Growth and manipulation of multiple microorganisms including bacteria, fungi, parasites, and bacteriophages for product manufacturing., • Proper use of PPE and safety protocols in BSL-2 and BSL-3 containment laboratories Molecular • Use and understanding of molecular biology methods and applications., • Manufacture of molecular controls/panels using aseptic technique., • Operation of real-time PCR equipment and sample to result platforms. Education: • 4-year B.S. degree required in biology, microbiology, or other life sciences program Experience: • Relevant experience in laboratory skills/cGMP preferred. Including but not limited to pipetting, preparing reagents, centrifugation, recording observations, etc., • Understanding of molecular biology techniques Minimum Requirements/Qualifications: • Ability to analyze and interpret data and results, • Proficiency in Microsoft Office, • Strong analytical, problem solving, process improvement skills, • Attention to detail, • Ability to multitask and adapt to changing priorities, • Thrives in a fast-paced, collaborative environment, efficiently works under pressure, within deadlines or other time essential constraints, • Excellent communication skills, both written and verbal, to communicate to all levels of the organization clearly and concisely, • Strong work ethic and an ability to excel within a rapidly changing and growing organization, • Willingness to cross train and support other teams as needed for our medium sized business., • This position does not have any direct reports but serves as a coach and mentor to peers across the organization. Salary Range: $50,000 - $60,0000, depending on location and experience. This position has not been approved for Relocation Assistance. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this job. They are not an exhaustive list of all of the duties and responsibilities associated with it. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description Software Controls Engineer (PLC and or SCADA experience) Job Description * Develop SCADA, PC, and PLC software for equipment automation. * Configure industrial networks for operator interfaces, data acquisition, and reporting. * Prepare control system design and FDA validation documentation in line with GAMP guidelines. * Contribute to new technical standards, product features, and internal procedures. * Collaborate with suppliers to specify, source, and support instrumentation and control equipment. * Provide project updates and serve as a key member of cross-functional teams. * Support field engineers, technicians, and end users with control and process issues throughout the project lifecycle. Skills & Experience * Bachelor’s in Electrical Engineering or equivalent, with 5+ years in process automation. * Strong troubleshooting and problem-solving skills. * Proven ability to manage and prioritize multiple complex projects independently. * Excellent organizational and workload management skills. * Proficiency in at least one higher-level programming language. It is the policy of GCR to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. GCR is an Equal Opportunity/Affirmative Action Employer and embraces diversity in our employee population. Company DescriptionGCR is a national technical recruiting firm. We specialize in contract, contract to hire, and permanent staffing solutions across a variety of industries including, Information Technology, Commercial, Automotive, Semiconductor, Medical Device, Pharmaceutical, Manufacturing, and Defense.GCR is a national technical recruiting firm. We specialize in contract, contract to hire, and permanent staffing solutions across a variety of industries including, Information Technology, Commercial, Automotive, Semiconductor, Medical Device, Pharmaceutical, Manufacturing, and Defense.

Job Description Systems Administrator Saia Communications offers its customers a comprehensive range of services that facilitate two-way radio communications across Western and Central New York. We are looking for a talented and responsible individual to join our team as a Systems Administrator. This is a new position within the company. This individual will report to the Systems Engineer and will have primary administrative responsibility for our customerfacing environment and will also serve a supporting role for our internal environment. The roles and duties of the Systems Administrator: • Provide technical support and training for end users (internal and external), • Provision user accounts, • Deploy client hardware and peripherals, • Apply configuration changes to various applications and services, • Assist in monitoring systems status and responding to alarm conditions, occasionally outside of regular business hours, • Maintain patch management for all Windows-based devices in the domain, • Deploy pre-configured network equipment, such as switches and routers, • In coordination with the Systems Engineer, facilitate end-user security training, such as good password hygiene practices, and administering phishing tests, • Assist in the integration with external systems such as building controls and data acquisition devices (typically low voltage systems), • Utilize and maintain existing automation scripts; improve and expand automation of maintenance tasks in coordination with the Systems Engineer, • Update and maintain system documentation, including change reports, • Consider every plan and execute every action with an understanding of its potential impact on systems security and availability, • Utilizing a company vehicle, occasionally travel within our service area to the company or customer premises to perform any of these tasks when necessary, • Maintain professional appearance and demeanor with coworkers and customers. All candidates must be able to demonstrate competence with the following systems and technologies:, • A comprehensive understanding of modern IT Security Principles, • 3+ Years of Experience with Core Windows Systems (Active Directory, Azure / Entra ID, Group Policy, DHCP Server, DNS Server), • 2+ Years of Experience with Microsoft 365 administrative tools, • 2+ Years of Experience with Microsoft PowerShell, • 2+ Years of Experience with Microsoft SQL Server, • Imaging and deployment of client devices (Hardware & Software), • Troubleshooting peripheral hardware issues, • Basic network troubleshooting skills (OSI Layers 1-3). Candidates with experience in any of the following systems and technologies should include them explicitly in their application:, • Any technology that facilitates the high availability of services, such as Windows Server Failover Clustering or SQL Server Always On Availability Groups, • E-mail services of any type, • Administration of any Multifactor Authentication Solution, • Linux operating systems, • Common Linux services such as Apache, NGINX, or Postgres, • Python programming language Candidates are expected to meet the following basic qualifications:, • A bachelor’s degree in a field directly related to Systems Administration and 4+ years of directly related work experience, • For Candidates without a degree: 6+ years of directly related work experience, • Relevant education, certification, or relevant work experience that demonstrates the candidate’s competency in core IT Security Principles (For example, Security+, CISSP, GSEC, etc.), • The candidate must pass a background check, including a criminal history check.

Job Description Summary: Seeking an individual to join our Automation Engineering team. This group focuses on supporting our manufacturing plant with the latest in automated manufacturing equipment. We are looking for candidates that have a passion for solving problems and that enjoys hands on work. Qualifications: • Pursing Bachelor of Science in Electrical Engineering or related field, • Ability to develop creative solutions to difficult problems, • Mechanically inclined with strong attention to detail, • MS Office experience (Word, Excel, Outlook, PowerPoint) Responsibilities: • Creation of electrical schematics and panel layout drawings for industrial manufacturing equipment, • Wiring of electrical panels, • Selection of components such as actuators, control system hardware and sensors, • Programable Logic Controller (PLC) programming and troubleshooting, • Industrial and Co-bot Robotic programming and teaching, • Test running and troubleshooting of automated machinery, • Sensor testing and evaluation, • Light mechanical design work and solid modeling, • Assembly of systems using hand tools, • Light fabrication using power tools such as drills, grinders, saws WORKING CONDITIONS In Addition To Being Able To Sit, Stand, Climb, Walk, Read, Talk, See And Hear, To Perform The Essential Functions Of This Job An Individual Must Be Able To Do The Following Additional Activities • Perform office work requiring sitting at the computer and other administration duties., • Walking on flat or uneven surfaces., • Bending, stooping, and working from just above the ground to 6-foot elevation., • Use of stairs and ladders for elevated work., • Lifting 5 to 15 lbs. loads is performed daily., • Lifting 15 to 45 lbs. loads is done on an intermittent basis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law.

Job DescriptionSalary: $22.00-$23.00/hr Come join a growing financial technology company thats leading the marketplace in both the marketing and servicing of credit cards! Continental Finance Company specializes in credit card options for those consumers with less than perfect credit. We are seeking a Quality Assurance Monitor to support our Operations team. The Quality Assurance Monitor is responsible for the review, monitoring, and analysis of our contact center vendor performance through real time call recordings and AI analytical platforms. Essential Functions: • Assist with management and oversight of an AI-powered speech analytics platform that detects sentiment, themes, and topics from real-time call recordings and text transcripts., • Actively provide insights and drive improvements to existing policies and processes based on observation, analysis of data, and strategic focuses., • Work closely with team members to ensure contact center vendors uphold defined expectations., • Contribute to a collaborative environment of continuous improvement and feedback by partnering closing with other operational departments., • Contribute to creating call monitoring methodologies and ensuring compliance with industry standards., • Oversee call monitoring activities and provide comprehensive reports on data and trends to the facility management team., • Engage in calibration sessions to maintain consistency in vendor evaluations. The ideal candidate will have the following: • An associate degree required. Bachelor's degree preferred., • A flexible, positive, and solutions-oriented mindset. This is a fast-paced environment that best suits individuals with the energy and willingness to tackle a variety of needs from our operations., • Ability to largely self-manage your time and energy appropriately across a high volume of needs of varying complexity, urgency, and topics., • Sense of ownership and responsibility towards troubleshooting issues and solutions with self-motivation to accept and complete tasks., • Highly organized individual with strong attention to detail., • Ability to communicate across a wide audience from operational end users, project stakeholders, and senior leaders., • Ability to multitask and successfully operate in a fast paced, team environment, • Must adapt well to change and successfully set and adjust priorities as needed, • Must have a high level of reason and analytical skills and the ability to be objective, • Prior banking or financial services experience is a plus but not required., • Compliance Management experience preferred., • Bilingual - ability to read, write and communicate effectively in both English and Spanish, preferred. Why Continental Finance? Continental Finance Company (the CFC) is one of Americas leading marketers and servicers of credit cards for consumers with less-than-perfect credit. Since our founding in 2005, we have prided ourselves on corporate responsibility to customers in terms of a strong customer support program and fair treatment. With our success, we have also grown into an innovative financial tech company! With a state-of-the-art consumer marketing and servicing platform, we provide a variety of services to consumers when other financial institutions will not accommodate them. With more than 2.6 million credit cards managed and serviced since our founding, we pride ourselves on putting the customer first.We are not a chartered banking financial institution, nor are we a debt originator or a credit card issuer. CFC is an equal opportunity employer that is committed to inclusion and diversity. Our company provides equal employment opportunity (EEO) regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or veteran status. CFC is seeking bright, energetic individuals that will help us grow and develop together! We uphold a promise to treat our employees with the same care and concern as we do our customers. We offer all employees a hybrid work schedule that includes three (3) days in the office and two (2) days working from home every week plus competitive compensation and benefits in an exciting, fast-paced business casual environment. Join our growing team and apply online today! CFC offers a hybrid work schedule which includes three (3) core days in the office (Tuesday, Wednesday, and Thursday) and two (2) remote workdays (Monday and Friday) #LI-HYBRID

Job Description Position: Senior Network Specialist Location: Remote Duration: 6 months plus (high probability of extension) Start: 10/13 Must have 6+ years experience. Hospital client in Buffalo has a requirement for a Network Specialist. They must have experience with F5 WAF. Required skills & experience: Overview: We are seeking a highly skilled, Information Security focused, F5 WAF Implementation Specialist to join our team on a temporary contract basis. The contractor will be responsible for implementing and optimizing F5 Web Application Firewall (WAF) solutions to enhance the security posture of our public-facing applications and APIs. This role is critical in mitigating common web threats, including those identified in the OWASP Top 10, while ensuring minimal disruption to business operations. Key Responsibilities: • Lead the deployment and configuration of F5 WAF across multiple public-facing applications and APIs. • Collaborate closely with application analysts and stakeholders to understand application architecture, functionality, and traffic patterns. • Design and implement WAF policies and rules based on industry best practices and tailored to specific application needs. • Conduct impact assessments and risk analysis to ensure WAF implementation does not adversely affect application performance or availability. • Develop and execute testing plans to validate WAF configurations and ensure effective threat mitigation. • Monitor and fine-tune WAF policies post-deployment to optimize protection and minimize false positives. • Document configurations, processes, and lessons learned for knowledge transfer and future reference. • Provide guidance on WAF lifecycle management, including updates, tuning, and integration with broader security infrastructure. F5 Qualifications: • Extensive hands-on experience with F5 WAF (ASM/Advanced WAF) in enterprise environments. • Deep understanding of web application security, including OWASP Top 10 vulnerabilities and mitigation strategies. • Proven ability to work with cross-functional teams, especially application analysts and developers. • Strong knowledge of F5 BIG-IP platform, including LTM and iRules. • Experience with change management and downtime minimization strategies. • Excellent troubleshooting, documentation, and communication skills. Security-Focused Qualifications: 1. Knowledge of Security Frameworks & Standards: • Familiarity with NIST Cybersecurity Framework (CSF), especially the "Protect" and "Detect" functions as they relate to application security. • Understanding of MITRE ATT&CK techniques relevant to web application threats (e.g., credential access, injection, and exploitation). • Experience implementing controls aligned with ISO/IEC 27001 and CIS Controls, particularly: • CIS Control 9: Limitation and Control of Network Ports, Protocols, and Services. • CIS Control 13: Data Protection. • CIS Control 14: Security Awareness and Training (for rule tuning and false positive management). 2. Threat Modeling & Rule Design: • Ability to perform threat modeling to identify potential attack vectors and inform WAF rule creation. • Experience designing custom WAF signatures and policy tuning based on application-specific threat profiles. 3. Advanced WAF Rule Management: • Proficiency in configuring F5 Advanced WAF features, such as: • Behavioral DoS protection • Bot defense • Threat campaigns • Geolocation and IP intelligence • Experience with Layer 7 DDoS mitigation and rate limiting strategies. 4. Security Logging & Monitoring Integration: • Ability to define alerting thresholds and log retention policies in accordance with compliance requirements. 5. Compliance & Regulatory Awareness: • Understanding of PCI-DSS, HIPAA, or GDPR requirements as they relate to web application security and WAF configurations. 6. Zero Trust & API Security: • Familiarity with Zero Trust Architecture principles and how WAF fits into perimeter and micro-segmentation strategies.

Job DescriptionDescription: About Cognosos At Cognosos, we solve a simple but expensive problem: businesses can't keep track of their critical processes. We built a groundbreaking, low-cost IoT platform that gives our customers visibility into critical medical equipment in a hospital, delivering the real-time insights necessary to keep processes running on track. Our patented technology is the magic behind it—it’s simple to deploy and provides the data our customers in healthcare need to eliminate search time, secure their inventory, and make smarter decisions. The RTLS (Real-Time Location System) Program Administrator is responsible for oversight, continuous maintenance, and ongoing optimization of the RTLS system within the hospital environment. This role requires close collaboration with clinical, operational, and technical stakeholders to ensure the RTLS solution effectively supports hospital workflows and enhances operational efficiency. The Program Administrator will monitor and analyze key performance indicators (KPIs) to assess program outcomes, drive return on investment (ROI), and promote data-driven decision-making. A critical focus of this role is ensuring stakeholder engagement, system adoption, and overall customer satisfaction. This is a 6-month contract position located on-site at Kaleida Health in Buffalo, NY. Candidates must comply with all Hospital security and immunization requirements. Requirements: Key Responsibilities: Program Oversight & Administration · Serve as primary point of contact for the customer; work to manage, grow and maintain the RTLS system hospital-wide · Engaging client clinical and operational stakeholders to ensure adoption of new workflows · Develop and maintain professional relationships with stakeholders and continuously seek to build new positive relationships · Ensure program objectives support hospital-wide performance initiatives · Drive defined programmatic outcomes across various RTLS use cases including but not limited to equipment distribution optimization · Think creatively to develop and streamline operational and system updates, define workflows and process maps, and proactively plan and implement improvements · Run weekly customer calls to mitigate issues and discuss product needs · Participate in governance committee meetings and facilitate stakeholder feedback sessions and implement process improvements based on input · Lead Quarterly Business Reviews and report against KPIs (asset utilization, ProPAR, rental management, and loss prevention) · Provide training for end-users and clinical teams to promote effective system use · Support new initiatives and projects with Cognosos PMO which includes department consultation, design, hardware implementation, software customization, clinical education, user adoption, post implementation program management, monitoring and support System Maintenance & Support • Oversee system health (infrastructure, tags, and badges), uptime, and data accuracy in partnership with customer, • Coordinate system updates and testing, and reviewing new system functionality, • Maintain system/technical documentation, troubleshoot tags and RTLS at an application level, and facilitate open communication with IT/Clinical Depts, • Assist with infrastructure and tag maintenance activities (gateway resets, beacon/exit monitor/reference tag maintenance, asset tag/battery management), • Assist Cognosos Teams with troubleshooting, open support tickets, etc.Qualifications:, • Experience as a biomed technician or related field, • Experience with RTLS platforms such as CenTrak, STANLEY, Midmark, or Versus · This role requires working on-site in a hospital environment, including patient care areas, and adhering to all facility protocols · Must be available for on-call support during major system events or go-lives Client Names & Locations: Buffalo General Medical Center (primary location) 100 High Street Buffalo, NY 14203 Millard Filmore Suburban Hospital 1540 Maple Road Williamsville, NY 14221 Degraff Emergency Department 445 Tremont Street Tonawanda, NY 14120 Spindrift Infusion Center 45 Spindrift Drive Williamsville, NY 14221

Job Description Job Title: Per Diem Ultrasound Technologist Reports to: Ultrasound Manager Status: Non- Exempt Pay: To determine our range, we consider as many of the following data points as are available to us: external market salary survey data, internal data in terms of comparable roles and our budget for the position. What we have posted is our good faith estimate of what we expect to pay: $30-$45 an hour. Summary: The Ultrasound Technologist works as a member of the Ultrasound team, reporting to the Ultrasound Manager. This role provides ultrasound based imaging to patients and supports the patient experience throughout their time at GLMI. Effective communication between departments and exemplary patient care must be maintained. This role performs a variety of tasks beyond ultrasound imaging including; patient calls, documentation in charts, and assisting with both patient and other co-worker needs. There are no call requirements for this position. Our Values: As a member of the team at GLMI it is expected that you embody the Great Lakes Way in your daily actions here. Personalize the Experience • Greet with eye contact and share a smile., • Create a tone of friendliness and warmth in conversations with patients, peers, and associates., • Respectfully interact with patients, peers, and associates at their pace and level., • Take time to listen to and understand others., • Demonstrate patience and compassion when interacting with patients, peers, and associates., • Do what you say you will do., • Anticipate and prevent potential problems., • Be responsible and efficient with Great Lakes resources (time, scheduling, property, equipment, etc.)., • Follow up on inquiries promptly and accurately., • Take personal responsibility for your work area and the quality of your work., • Speak positively about Great Lakes, team members, and patients., • Demonstrate respect and attentiveness to team members when communicating., • Recognize and share successes of the Great Lakes Way in action., • Proactively offer to help others., • Be flexible and embrace change with a positive attitude., • Contribute to a fun, energetic, and positive work environment., • Share information, knowledge, and expertise., • Be relentless about acting on opportunities to learn and improve., • Ask for, accept, and use feedback., • Perform all duties of an ultrasound technologist including:, • Operating ultrasound equipment from various manufacturers., • This includes the selection of correct technical factors tailored to each patient and exam., • Assisting the radiologist with semi invasive ultrasound procedures., • Prepare patients for procedures by explaining the process, ensuring comfort, and positioning them appropriately for optimal imaging results., • Verify accuracy of orders prior to examining the patient., • Review previous imaging and tailor the exam accordingly., • Review images for clarity, consistency, and quality, ensuring diagnostic accuracy., • Enter data in the Radiology Information System, assuring accuracy and completeness., • Provide detailed reports of ultrasound findings in written and/or oral form to Radiologists., • Maintain a clean and orderly work area, provide quality control processes when necessary, and ensure the safety of patients in the department., • Attend to the medical needs of the patient at all times, maintaining patient modesty., • Clean the transducers after each exam, including the high level disinfection process mandatory with endovaginal probe. In addition, the technologist will monitor and change the disinfectant solution monthly., • Ensure that the ultrasound equipment is properly maintained, performing routine maintenance and troubleshooting as needed., • Operates standard imaging equipment/software including, but not limited to:, • Ultrasound machine, • PACS/RIS computer, • HealtheLink, • Restock supplies and maintain a list of things to be ordered., • Assist PSR team and/or administrative staff when necessary., • When available, help fellow technologists (i.e. change patients), • Attend all required staff meetings, training seminars and other designated meetings, • Other duties as needed., • Ability to perform each duty as listed above, • Strong knowledge of anatomy, physiology, and sonographic techniques., • Excellent interpersonal and communication skills for interacting with patients and team members., • Strong computer skills including use of information systems and Google based programs., • Attention to detail and strong organizational skills., • Problem solving skills, • Associate's degree (AAS) and subsequent Ultrasound technical program or Bachelor's Degree in US, • RDMS and RVT, • CPR/BLS certification is required, • May be asked to lift up to 20 pounds, • Standing, walking, sitting, keyboard use for long periods of time, • Ability to listen and communicate with patients face to face or over the phone, • Will be required to read, write, work in a fast-paced office setting, • Ability to make decisions and think quickly, • Must have mental and physical capabilities to perform all tasks listed above Job Posted by ApplicantPro

Job Description Job Title: Full Time Ultrasound Technologist Reports to: Ultrasound Manager Status: Non- Exempt Pay: To determine our range, we consider as many of the following data points as are available to us: external market salary survey data, internal data in terms of comparable roles and our budget for the position. What we have posted is our good faith estimate of what we expect to pay: $30-$45 an hour. Summary: The Ultrasound Technologist works as a member of the Ultrasound team, reporting to the Ultrasound Manager. This role provides ultrasound based imaging to patients and supports the patient experience throughout their time at GLMI. Effective communication between departments and exemplary patient care must be maintained. This role performs a variety of tasks beyond ultrasound imaging including; patient calls, documentation in charts, and assisting with both patient and other co-worker needs. There are no call requirements for this position. Our Values: As a member of the team at GLMI it is expected that you embody the Great Lakes Way in your daily actions here. Personalize the Experience • Greet with eye contact and share a smile., • Create a tone of friendliness and warmth in conversations with patients, peers, and associates., • Respectfully interact with patients, peers, and associates at their pace and level., • Take time to listen to and understand others., • Demonstrate patience and compassion when interacting with patients, peers, and associates., • Do what you say you will do., • Anticipate and prevent potential problems., • Be responsible and efficient with Great Lakes resources (time, scheduling, property, equipment, etc.)., • Follow up on inquiries promptly and accurately., • Take personal responsibility for your work area and the quality of your work., • Speak positively about Great Lakes, team members, and patients., • Demonstrate respect and attentiveness to team members when communicating., • Recognize and share successes of the Great Lakes Way in action., • Proactively offer to help others., • Be flexible and embrace change with a positive attitude., • Contribute to a fun, energetic, and positive work environment., • Share information, knowledge, and expertise., • Be relentless about acting on opportunities to learn and improve., • Ask for, accept, and use feedback., • Perform all duties of an ultrasound technologist including:, • Operating ultrasound equipment from various manufacturers., • This includes the selection of correct technical factors tailored to each patient and exam., • Assisting the radiologist with semi invasive ultrasound procedures., • Prepare patients for procedures by explaining the process, ensuring comfort, and positioning them appropriately for optimal imaging results., • Verify accuracy of orders prior to examining the patient., • Review previous imaging and tailor the exam accordingly., • Review images for clarity, consistency, and quality, ensuring diagnostic accuracy., • Enter data in the Radiology Information System, assuring accuracy and completeness., • Provide detailed reports of ultrasound findings in written and/or oral form to Radiologists., • Maintain a clean and orderly work area, provide quality control processes when necessary, and ensure the safety of patients in the department., • Attend to the medical needs of the patient at all times, maintaining patient modesty., • Clean the transducers after each exam, including the high level disinfection process mandatory with endovaginal probe. In addition, the technologist will monitor and change the disinfectant solution monthly., • Ensure that the ultrasound equipment is properly maintained, performing routine maintenance and troubleshooting as needed., • Operates standard imaging equipment/software including, but not limited to:, • Ultrasound machine, • PACS/RIS computer, • HealtheLink, • Restock supplies and maintain a list of things to be ordered., • Assist PSR team and/or administrative staff when necessary., • When available, help fellow technologists (i.e. change patients), • Attend all required staff meetings, training seminars and other designated meetings, • Other duties as needed., • Ability to perform each duty as listed above, • Strong knowledge of anatomy, physiology, and sonographic techniques., • Excellent interpersonal and communication skills for interacting with patients and team members., • Strong computer skills including use of information systems and Google based programs., • Attention to detail and strong organizational skills., • Problem solving skills, • Associate's degree (AAS) and subsequent Ultrasound technical program or Bachelor's Degree in US, • RDMS and RVT, • CPR/BLS certification is required, • May be asked to lift up to 20 pounds, • Standing, walking, sitting, keyboard use for long periods of time, • Ability to listen and communicate with patients face to face or over the phone, • Will be required to read, write, work in a fast-paced office setting, • Ability to make decisions and think quickly, • Must have mental and physical capabilities to perform all tasks listed above Job Posted by ApplicantPro

Job Description Do you take pride in keeping a building running smoothly and safely—while making it feel like home? We’re seeking an experienced Maintenance director to oversee the day-to-day operations of our Skilled Nursing or Assisted Living community In this role, you’ll lead all aspects of building maintenance, safety, and preventative care to ensure a safe, comfortable, and welcoming environment for our residents, staff, and families. What You’ll Do: * Oversee and perform maintenance on HVAC, plumbing, electrical, and general building systems * Manage preventative maintenance programs and maintain compliance with all health, safety, and environmental standards * Supervise maintenance staff and outside vendors * Respond promptly to work orders and emergency repairs * Partner with leadership to support a high-quality resident experience What We Offer: * A supportive team environment where your work is truly appreciated * Competitive compensation and benefits * Stable hours and a strong sense of community * A beautiful, well-maintained facility What We’re Looking For: * Experience working in healthcare a plus * Strong troubleshooting skills and working knowledge of mechanical systems * Ability to lead a small team with professionalism and pride * A hands-on leader who takes initiative and communicates clearly * Flexibility to respond to emergencies outside of regular hours as needed If you’re someone who cares about the people behind the building—and takes pride in every detail—this could be the perfect fit.

Job DescriptionPower-Flo Technologies is seeking a Motor Repair Mechanic to join the team at our Buffalo Pump and Motor Repair shop. Mechanic Primary Functions At the direction of the Shop Foreman - motor repair mechanics are responsible for the proper disassembly and evaluation of a motor including troubleshooting. Mechanics are also responsible for the assembly, quality control and testing processes involved in motor repair. Field Service positions available to properly qualified individuals. Mechanic Essential Responsibilities • Disassemble mechanical ac & dc motors, gear units and pumps., • Assemble mechanical ac & dc motors, gear units and pumps., • Diagnose problems and failures of incoming units to ensure the customer’s complaint is resolved., • Interpret and apply dimensional measurements, • Measure and record electrical data, mechanical fits and clearances., • Recording all necessary materials in order to complete the repair, • Follow all necessary instructions in order to complete the repair, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Organize and maintain personal tools and equipment, • Willing and able to work OT as required. Motor Repair Mechanic Necessary Qualifications • Ability to work independently and in a team setting, • Basic knowledge regarding use of a pc, • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc…, • Mechanical aptitude required, • A valid and clean driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays Salary Range: Between $17 - $32/hour depending on experience We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description POSITION SUMMARY: Responsible for the operation and maintenance of the central Utility Plant Systems. Systems include the BAS (Building Automated System); chillers; boilers; Electrical Distribution System, including Emergency Generators; and all their associated sub-systems. Additional knowledge of HVAC systems preferred. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Maintains safe, efficient operation of building systems and installs/repairs equipment according to work orders assigned via the electronic work order system 2. Ensure proper operation and working order of centrifugal chillers, boilers, emergency generators, machinery, pumps, and other building mechanical equipment, 3. Observe and interpret the BAS and take appropriate corrective actions to maintain building systems, 4. Maintain Daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work., 5. Test boiler water quality and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits, 6. Responds to HVAC situations during and after hours for the purpose of resolving immediate concerns, 7. Enter data and information into work order system in a timely and accurate manner, 8. Complete all regulatory paperwork correctly, 9. Work positively and cooperatively as a member of the Facilities team 10.Demonstrate collaboration with internal, cross functional teams and internal/external customers 11.Adhere to the guiding values and beliefs of the organization, including respect and courtesy toward co-workers, vendors and those we serve 12.Perform other duties as assigned SKILLS: 1. Knowledge of complex electrical and mechanical building equipment 2. Understanding, installing and maintaining high pressure steam boilers, 3. Ability to work with steam boilers, steam distribution systems, hydronics and hot water boilers heating systems. Chemical treatment, testing and analysis. 2 of 3, 4. Knowledge of heat pumps, boilers, chillers, cooling towers, AHU’s, air compressors, heat exchangers, exhaust systems VAV pneumatic controls, 5. Knowledge of working with and troubleshooting complex electrical and mechanical building equipment, 6. Knowledge of handling refrigerant and following EPA guidelines for recovery and disposal, 7. Knowledge of servicing HVAC equipment including boilers, furnaces, AHUs, condensers preferred, 8. Able to adhere to safe working practices and handle hazardous materials, 9. Ability to troubleshoot and make repairs, install and perform preventative maintenance on systems 10.Able to work independently or as a team member to accomplish work 11.Able to accomplish job assignments in an organized, efficient, quality manner 12.Takes initiative and responsive to potential issues and needs 13.Able to complete work in an organized manner 14.Interacts with others with respect, demonstrates positive interpersonal and customer service skills 15.Able to troubleshoot, prioritize and problem solve issues in a timely manner 16.Works positively and cooperatively as a member of the Facilities team 17.Basic computer skills with ability to write and respond to emails in Microsoft Outlook, enter data and receipts into work order system via smart phone, iPad or computer 18.Able to lift and push up to 50 pounds 19.Able to stoop, kneel, crawl, reach with hands and arms, climb stairs, repetitive use and dexterity with hands and fingers 20.Able to work independently or as a team member to accomplish work 21.Able to accomplish job assignments in an efficient, quality manner 22.Takes initiative and responsive to potential issues and needs EDUCATION AND EXPERIENCE: 1. High School diploma or equivalency required 2. Valid City of Buffalo Stationary Engineer License 1st or 2nd Class; or equivalent required, 3. Valid driver’s license required, 4. Experience as a Stationary Engineer, five years required, 5. Five years’ experience required, seven years preferred, working with HP steam boiler systems and associated equipment., 6. Experience working with chillers, cooling towers, AHU’s, air compressors, heat exchangers, exhaust systems, VAV pneumatic controls, etc. preferred, 7. Five years’ experience required with steam boilers, steam distribution systems and chemical treatment, testing and analysis, 8. Training or experience in Tridium building automated systems (BAS) required 3 of 3, 9. Basic computer skills to write and respond to emails, enter data and receipts into work order system via smart phone, iPad or computer required 10.EPA certification is required (may be obtained within 6 months of hire) 11.Experience with heat pumps and related equipment required 12.Experience working with and troubleshooting electrical and mechanical building equipment preferred 13.Experience handling refrigerant and following EPA guidelines for recovery and disposal preferred WORK SCHEDULE: Full time Monday-Friday; 7:00am - 3:00pm; 37.5 hours per week; with occasional coverage of other shifts and overtime! PHYSICAL REQUIREMENTS OF THE POSITION: The physical demands are representative of those to perform the essential functions of this job with or without reasonable accommodation(s): Must be able to lift, push or pull up to 50 pounds and vision for color, peripheral and depth Able to stoop, kneel, crouch and crawl, reach and climb stairs; with visual and auditory requirements Able to climb extension ladders

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay This role empowers you to leverage energy monitoring and optimization platforms to commission and test customized web-based energy and building equipment applications. You will monitor HVAC automation systems, analyze performance data to reduce energy waste, and optimize fault detection and diagnostics. Your expertise will be instrumental in integrating mechanical and electrical systems with our suite of data acquisition and analytical systems, spearheading R&D initiatives, and enhancing system capabilities. Responsibilities include troubleshooting Building and Power Management Systems, conducting site surveys, performing quality assurance testing, and guiding other Energy Application Engineers. What are we looking for • Bachelor's degree in mechanical engineering or aerospace engineering, • 5 + years experience in related field., • Experience with MATLAB, SQL and Python., • Advanced computer skills and proficiency in MS Office Suite required., • Travel required (0-25%), travel to internal office site, client, or training Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Controls Engineer II is responsible for the development and implementation of industrial controls systems for RNG plants and related skid systems utilizing PLC's, SCADA, and HMI software to meet project and customer requirements. Familiarity with controls, electrical power systems, field devices, operations, network configurations, and industrial communications protocols are required. What would we like to see? • Bachelor's degree in electrical engineering or a related engineering field required. Additional experience will be considered in lieu of degree., • 5+ years related experience in control system design and related hardware specification and selection., • Experience with Rockwell and/or other similar PLC platforms., • Experience with Human Machine Interface (HMI) and/or SCADA systems, • AutoCad Electrical knowledge helpful, • General knowledge of rotating equipment such as pumps, compressors and motors., • Experience with AC/DC electrical systems and components such as VFD's, power supplies, relay logic, etc., • Experience leading troubleshooting, testing, and commissioning of automated machine systems, components, and electrical devices., • Detailed knowledge of NEC (National Electric Code) and other international electrical codes such as IEC and CSA., • Ability to communicate clearly and professionally with clients, suppliers, and internal team on a regular basis, both verbally and in writing., • Must be good at multi-tasking and running multiple projects in different stages of completion at once., • High organizational skills are required to maintain and track all project correspondence and documentation. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description About Company: If you're seeking a company that values inclusivity, development, supportive team dynamics, and stable global growth areas (e.g. hydrogen technology), MHA ZENTGRAF Corp. is a great place to work. We demonstrate values that align with positive employee feedback and a commitment to maintaining a balanced, respectful workplace. About the Role: The Machinist role is critical in manufacturing high-quality precision components by operating and maintaining various machine tools, including CNC machines and manual lathes. This position requires interpreting detailed blueprints and technical drawings to produce parts that meet exact specifications and tolerances. The successful candidate will ensure that all machined parts are accurately measured and inspected using precision measuring instruments to maintain quality standards. Additionally, the Machinist will be responsible for setting up, adjusting, and troubleshooting machine tools to optimize production efficiency and minimize downtime. Ultimately, this role contributes to the overall success of the manufacturing process by delivering precise, reliable, and defect-free components that meet customer and company requirements. Minimum Qualifications: • High school diploma or equivalent., • Proven experience operating CNC machines and manual lathes in a machine shop environment., • Strong ability to read and interpret blueprints and technical drawings., • Proficiency in precision measuring techniques and use of measuring instruments., • Certification in machining or CNC operation from a recognized technical institution., • Experience with tool and die making., • Familiarity with CAD/CAM software for programming CNC machines., • Understanding of quality control processes and standards in manufacturing., • Operate CNC machines and manual lathes to manufacture precision parts according to engineering specifications., • Read and interpret blueprints, technical drawings, and work orders to determine machining requirements., • Set up machine tools, including selecting and installing appropriate tooling and fixtures., • Perform precision measuring and inspection of machined parts using calipers, micrometers, and other measuring instruments., • Conduct routine maintenance and troubleshooting of machine tools to ensure optimal performance., • Deburr and finish machined parts to meet quality and safety standards., • Collaborate with engineering and quality teams to resolve machining issues and improve processes. The required skills such as CNC machine operation, precision measuring, and blueprint reading are essential for accurately producing machined parts that meet strict specifications. Daily use of machine tools and manual lathes allows the Machinist to shape and finish components with high precision and efficiency. Deburring skills ensure that all parts are free from sharp edges and defects, contributing to product safety and quality. Preferred skills like tool and die knowledge and familiarity with CAD/CAM software enhance the Machinist's ability to program and optimize CNC machines, improving productivity. Together, these skills enable the Machinist to maintain high standards of workmanship while adapting to complex manufacturing requirements.

Job Description OVERVIEW OF POSITION: Conducts experiments and maintains systems to develop chemical processes and products. RESPONSIBILITIES OF THIS POSITION – ENGINEERING: • Conducts experiments in accordance with procedure and maintains records to develop complex, new and improved chemical manufacturing processes., • Assists with design, documentation and formulation of complex chemical products such as synthetic rubber and thermoplastic compounds., • Executes sampling, analysis and testing techniques used in the characterization of polymer products and precursor raw materials., • Reviews data, observes and recommends measures for optimizing operations such as mixing, coating and heat transfer., • Implements production and processing methods, documentation and controls to meet quality standards in the most cost-effective manner., • Investigates and identifies solutions to work-in process problems., • Implements improvements and/or modifications in materials, operations, equipment and other process related factors., • Adopts, utilizes and maintains ISO 9000 procedures and documentation with attention to detail., • Reviews variances in operational data and initiates troubleshooting for resolution., • Works closely and communicates effectively with other engineering and functional areas to accomplish tasks., • Executes any other duties as assigned by supervisor. COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Preferred – Associates Degree in Chemistry, Chemical Engineering, Materials Science or related field., • Preferred – Minimum 3 years manufacturing experience with polymers., • Preferred – Minimum 3 years analytical, testing and characterization techniques of polymers., • Required – Read, Write and Comprehend English with strong communication skills., • Required – Strong computer skills, including Microsoft Office (Word, Excel, PowerPoint)., • Required – Associate Degree in Chemistry, Engineering Technology or related field.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Opportunity for advancement Summary: We are seeking a highly motivated and experienced Department Manager to lead and be involved in the daily operations of our LED Digital Message Sign department as well as maintaining our in-house IT. This role involves strategic planning, team management, and ensuring the department achieves its goals and objectives while maintaining high standards of quality and efficiency. Key Responsibilities: • Service:, • Field calls and emails from customers to troubleshoot LED Digital Message signs either on site or remotely., • Documenting all aspects of service calls as well as providing solid solutions., • Assemble LED Sign Cabinets to be installed., • Setup, Program, Train customers on creating and posting sign content., • Quality and Compliance:, • Ensure adherence to company policies, procedures, and industry regulations., • Implement and maintain quality control measures to ensure high standards of work., • Stay updated on industry trends and best practices., • Stay organized with inventory counts and keeping customer data up to date., • Communication and Collaboration:, • Communicate effectively with team members and other departments., • Collaborate with other managers to achieve company-wide objectives., • Education: High School Diploma or GED, • Experience: 3 Years of experience in a similar role, preferably in IT or the Sign Industry., • Leadership and Management Skills: Proven ability to lead, motivate, and manage, • Communication Skills: Excellent written and verbal communication skills., • Problem-Solving Skills: Strong analytical and problem-solving skills., • Organizational Skills: Excellent organizational and time management skills., • Technical Skills: Proficiant in Low Voltage Systems, Basic Networking, Windows OS, Troubleshooting, • Other Skills: Proficiency in Business Management Software, Office 365, Low Voltage, Cable Management, P2P Ubiquity Bridge Setups, Remote Software Support, GoDaddy Email & Domain, VOIP Systems, PoE Camera Systems. This position does require the use of a bucket truck on a regular basis. Training is provided. Fork Lift Certified is a PLUS! Knowlege of Photoshop and Illustrator is a PLUS! Must have own hand tools such as drills, low voltage tools such as RJ45 Crimper, multimeter and pliers. Most consumables are paid for by NAS. We are seeking an individual who has the ability to learn quickly and adapt to a fast paced environment. To Apply: Please submit your resume and cover letter to About NAS Sign Company: NAS started as Neon Art Signs. Our goal was to create the most visually appealing signs for our clients. As time moved on, so did we. Neon Art Signs morphed into NAS as our clientelle required more than just neon signs. We now speciallize in every aspect of modern signage. NAS is one of the current leaders in LED Digital Message Sign sales, service and installation for the WNY area. We strive to create a visual representation for all small and big businesses. NAS has also created solid relationships with many national brands such as O'Rielly Auto Parts, Taco Bell, Walmart, KFC, McDonald's, Rite-Aid, NOCO, and so many more! Our mission is to provide high quality sign products and services which create the best results and value for our clients. You can rely on NAS for professional, well executed visual communications! Our dedication, integrity and network of resources ensures your success. From national brands to franchisees, to small businesses, NAS has been a trusted name in the sign industry for over 40 years!

Job DescriptionJoin Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Integration Specialist- Pro Sound is responsible for installation and service of Pro AV and Paging Systems, ensuring that audio-visual and paging systems are installed correctly and smoothly to meet client needs and our high standards. We are looking for a candidate who demonstrates technical knowledge, can troubleshoot technical issues and the drive to learn and grow with our team. Training and advancement opportunities available. What are we looking for • A minimum of two years of experience in audio visual, paging, IT, or related industry., • Proficient in the installation and setup of audio-visual systems, paging systems, and components, including displays, projectors, sound systems, constant voltage paging systems, and other audio-visual equipment., • Experience in troubleshooting and servicing analog and digital AV / PA systems a plus., • Experience working with and setting up IP networks a plus., • Experience working on construction sites, following safety protocols, and working with hand and power tools. (OSHA Certification a plus), • Excellent customer service, verbal, and written communication skills in dealing with clients and management., • Ability to think on your feet, problem-solve, and learn quickly., • Great time management skills, • A clean valid driver's license (daily travel to customer sites and occasional extended travel required), • Ability to lift at least 50 pounds. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionJob ProfileJob Title: Technical Engineer IV (Splunk, SIEM)Location: Buffalo, NYHire Type: Contingent Pay Range: $53.20 – $88.65/hourWork Model: HybridRecruiter Contact: Brian Fesmire () No C2C, C2H, 1099 or Visa Sponsorship available Nature & Scope:Positional OverviewAre you a seasoned Splunk Technical Engineer looking for an exciting new challenge? Join our client’s dynamic team where innovation and excellence are at the core of everything we do. They offer a collaborative and stimulating environment where your expertise will drive cutting-edge projects and shape the future of technology. If you're passionate about pushing the boundaries of technology and want to make a significant impact, we want to hear from you. Apply now! Role & Responsibility:Tasks That Will Lead to Your Success • Lead the design and architecture of the bank's SIEM infrastructure, ensuring its effectiveness, scalability, and alignment with industry standards and regulatory requirements, • Implement, configure, and optimize SIEM solutions to collect, correlate, and analyze security event data from various sources, such as network devices, servers, applications, and endpoints, • Develop and maintain SIEM use cases, correlation rules, alerts, and reports to identify and prioritize security incidents and potential threats, • Collaborate with other Cybersecurity and Security Engineering teams to investigate and resolve complex security incidents, conduct root cause analysis and recommending remediation actions, • Stay up to date with the latest security threats, vulnerabilities, and industry trends, and proactively assess their potential impact on the bank's SIEM infrastructure, • Lead SIEM-related projects, including system upgrades, enhancements, and integration with other security tools and technologies, • Provide guidance and mentorship to junior SIEM engineers, promoting knowledge sharing and skill development within the team, • Collaborate with internal stakeholders, such as IT operations, compliance, and risk management, to ensure the Bank's security posture is in line with industry standards and regulatory requirements, • Participate in incident response exercises, tabletop simulations, and other security-related drills to enhance the bank's incident response capabilities, • Responsibilities may include infrastructure architecture and design, research and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing, • Regularly and independently interact with business partners of varying associate and management levels to ensure clarity of the problem/opportunity and elicit business requirementsSkills & Experience:Qualifications That Will Help You Thrive, • Minimum Bachelor’s degree in Computer Science or Computer Engineering., • Minimum 8 years advanced experience in a technical engineering position involving infrastructure design technologies, data management and interchange, system design and/or development for complex applications., • 8+ years of experience engineering, architecting and implementing SIEM technologies with Splunk (architecting the environment, parsing data logs and onboarding applications), • Ability to translate complex business/functional requirements into structured high-quality implementations using any variety of industry standard approaches., • Advanced technical, analytical, troubleshooting and problem-solving skills., • Demonstrated ability to develop alternative solutions to complex problems and recommend the best solution to the technology business, and project teams.

Job Description Title: Service Engineer Reports to: Service Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non-Exempt Travel: 90% Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelor’s or associate Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening.

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose of Role Position provides essential clerical and organizational support to ensure the smooth operation of the Student Accounts office and is responsible for aspects of initiating and maintaining transactions, records, and communication for student accounts in a knowledgeable, effective manner that keeps outstanding receivables at a minimum level while working with the highest integrity. About This Opportunity Joining our Business Affairs team, the Student Accounts Specialist will be responsible for the following: Billing and Receivables: • Generating invoices, processing payments, managing refunds according to policy and regulations, • Manage payments against the current term payment plans available through third-party platform, • Assist with processing refund checks, • Processing financial transactions, • Receipt payments made in person and by mail, providing receipts when requested, • Responding to inquiries, resolving issues, and providing information and guidance to students, families, and staff regarding student accounts, • Timely management of high volume of call, text, and email communications, providing support, problem solving. and follow-up, • Ensuring compliance with relevant regulations, such as FERPA and 1098-T reporting., • Maintaining accurate student records, managing financial holds, • Review Scholarship forms and coordinate with Financial Aid to record on students' accounts, • Performing various clerical tasks assigned by supervisors, • Maintain and manage the office calendar for term start dates, billing dates, payment due dates, liability dates and related information, • Assist with coordination and distribution of pertinent tax forms Required Qualifications Required Knowledge, Skills and Abilities: • Enjoy working in a team environment and able to work independently, • Ability to communicate effectively with students and families regarding sensitive financial matters while following appropriate regulations, • Proficiency in relevant software, including spreadsheets (Excel), databases, and financial systems, • Ability to manage multiple tasks, prioritize work, and meet deadlines, • Effective organization and troubleshooting competencies, • Accuracy in financial transactions, record-keeping, and report generation, • Understanding of student billing, financial aid, and relevant regulations Minimum Qualifications: • At least 2 years of education or experience in a business-related field is preferred, with preference given to accounting, financial aid or customer service. Total Compensation Daemen University offers a robust total compensation package that includes: • Health insurance with an option of two plans: an HSA plan with the deductible funded by employer HSA contributions, or a copay plan., • Dental insurance through the Guardian network., • Vision insurance through the Guardian network, and an option between the VSP or Davis plans., • An 8% employer contribution to the retirement savings account when employees contribute just 5%., • Fully paid long term disability insurance, guaranteed-issue life insurance for new hires up to a volume of $150,000., • Tuition waiver for full-time employees and their qualified dependents. Entrance in Tuition Exchange scholarship opportunities to pursue education at other institutions., • Generous time off for administrative and staff employees. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro