Trabajos troubleshooting en Piscataway, New JerseyCrear alertas

Job Title: Respiratory Therapist Reg Location: RWJ New Brunswick Department: Respiratory Care Req#: 0000178516 Status: Part-Time Shift: Day Pay Range: $44.75 - $54.88 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: A respiratory therapist is responsible for the care, evaluation and tests of the patients suffering from complications related to the breathing system.Respiratory therapists practice under the able guidance of expert physicians and should ensure that all respiratory care, starting from diagnosis to therapeutic treatment is properly carried out. Qualifications: Required: • A NJ Respiratory License, • BLS certification, • 2-3 years of experience is preferable. • Administer aerosol medication, Chest PT and related therapies including medical gas therapy per physician orders or approved protocols. Perform rounds on all assigned patients to deliver appropriate care., • Assess and interpret patient status using Laboratory and Radiology results along with vital signs and other assessments to identify and provide appropriate care based on the specific needs identified. Evaluate therapy orders for completeness, appropriateness, quality and effectiveness using Evidence-Based Practice Guidelines. Recommend changes in the care plan based on assessments and guidelines., • Correctly complete all patient records and documentation according to Department policy including patient assessment, plan of care, E-MAR, patient education and performance improvement fields. Rarely leaves Overdue Tasks., • Demonstrate knowledge and skill in the use of Oxygen Therapy, BiPAP, CPAP and High Flow Nasal Cannulas (HFNC) for use in primary assignment area (i.e. neonate, infant, pediatric and adult) patient populations. Knowledge and skill includes device and interface selection, application, operational verification and modes of therapy. Assess effectiveness of therapy. Report any adverse reaction or side effects such as skin irritation., • Demonstrate Knowledge and skill in the use of invasive and non-invasive mechanical ventilation in primary assignment area (i.e. neonate, infant, pediatric and adult) patient populations. Knowledge and skill includes device and interface selection, application, operational verification, troubleshooting, and modes of therapy. Assess effectiveness of therapy three times per shift. Report any adverse reactions or side effects such as skin irritation., • Comply with all Department, Infection Prevention, and Safety policies and procedures. Demonstrate knowledge of National Patient Safety Goals and relevant Standards from Joint Commission, Department of Health, CMS and other regulatory bodies., • Determine priorities and organizes work and time to meet them. Demonstrate the ability to function in a diverse workforce. Interact tactfully, constructively and diplomatically with others., • Perform emergency airway care procedures and maintain patient ventilation during emergent situations. As ordered and if certified, establish, maintain and obtain samples from arterial lines. Perform arterial punctures to obtain arterial samples. Analyze arterial, capillary, and venous blood samples., • Complete all mandatory Competencies within specified timeframe. Complete all Healthstream online training within specified timeframe., • Attend external and internal educational programs as part of continuing education. At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. * • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance) RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education. Equal Opportunity Employer

Job Title: CT Technologist Location: RWJ New Brunswick Department: Cat Scan Req#: 0000178387 Status: Full-Time Shift: Night Pay Range: $46.30 - $55.37 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Performs duties directly involved with a variety of CAT Scan procedures. Prioritizes the patient as number one, and to put forth the utmost quality as a CT Technologist. Qualifications: Required: • High School Diploma or equivalent required., • Graduate of an A.M.A. approved school of Radiography Education., • Positions patient to obtain study as prescribed by standard operating procedures., • Able to position all anatomical parts as indicated by the Standard Operating Procedures., • Performs the preparation in order to insure the prompt commencement of the procedure., • Ensures all necessary equipment is at hand prior to starting the ordered examination., • Under the direction of a Radiologist, instructs and administers cleansing preps and contrast agents., • Protects patients and other personnel by administrating proper radiation protection techniques., • Protects the reproductive organs with appropriate apparel, if visualization of these areas is not required., • Transfers and properly position patients for examinations in order to obtain desired radiographic results according to physician specifications., • Assists physicians in performance of examinations., • As outlined in radiology policy and procedure and under the direction of the medical chairman the technologist will have proven competency in the administration of IV contrast media, to include venipuncture., • Practices sterile techniques and prevents cross contamination. Secures and returns supplies. Maintains room and room’s stock., • Responsible for necessary equipment maintenance recommendations and troubleshooting when indicated. Keeps all necessary equipment maintenance logs which pertain to preventative maintenance of Emergency service., • Makes sure all necessary supplies are in room and restocks room accordingly., • Responsible for patient scheduling and smooth flow of schedule and patient preparation including contrast administration., • Responsible for quality control of Cat scan examinations., • Uses the computer system according to standard operating procedures:, • Able to enter studies in RIS and HIS, and track cases., • Able to split and fix studies in PACS as necessary., • Attends in-service training as required by the department, • Able to attend the majority of educational in-services., • Explains procedures to the patient and answers any questions prior to the commencement of the procedures., • Completes all necessary paperwork/documentation prior to the submitting of the procedure for interpretation., • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance) RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education. Equal Opportunity Employer

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Maintenance Mechanic - Dayton, NJ Shift: 3rd Pay: $35.39/hr-$40.31/hr (based on experience) How you will impact WestRock: • Troubleshoots and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numeral controls, power supplies, drives, gages and test equipment., • Plans and performs work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment., • Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements., • Advises operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components., • Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved., • Maintains company-required performance and maintenance records for identified equipment., • Performs preventive maintenance functions as directed., • Assists maintenance personnel with technical troubleshooting., • Assists and trains other maintenance and/or other technical level employees., • Must be educationally certified through a tech or trade school beyond High School, • Must be highly safety conscious., • Proven experience in the electrical/electronics, mechanical, hydraulic and pneumatic fields are required and the ability to demonstrate high proficiency in these areas., • A thorough knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes., • Willing to work any shift and overtime as required., • Computer experience/operation and PLC programming are necessary., • High degree of precision working with minimum tolerances required., • Ability to climb in overhead structures, to work beneath machines and in close quarters performing analysis and repair work., • Must be willing to obtain High Pressure Black Seal boiler operators license after probationary period The starting range is $35.39/hr-$40.31/hr depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 12 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ___ and the application window is expected to close by 3/24/26 #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

COME WORK FOR US FOODS®! Ready to build a career with a company that’s leading the foodservice industry? We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Schedule: Sunday - Thursday Nights, 11:00 PM - 7:30 AM, OT available Pay range is $33- $38 hourly based on certifications and experience. Excellent Benefits starting DAY ONE! Including: * $250 Quarterly tool allowance, that's $1,000 extra per year! * New Boots Provided Yearly! * Low-cost Medical, Dental, and Vision for Family Coverage. * Paid vacation time, sick, and personal time. * Employee uniforms provided. * Employee referral bonus program * 401K with FANTASTIC company match! * Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! BASIC PURPOSE: To provide a safe and reliable fleet by performing preventative maintenance and proper repairs on all fleet equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES * Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). * Perform preventative maintenance within DOT standards. * Receive road calls, assign third party vendor, and work with business partners on plan of action. * Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. * Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. * Backup to other maintenance shop personnel. * Willingness and capacity to assume increased responsibility and certificates. * Other duties as assigned by manager. QUALIFICATIONS * Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. * Diagnostic and troubleshooting competency relating to equipment repairs. * Successfully demonstrated independent analytical and problem-solving skills. * Prior experience in administering appropriate PM program. * Must furnish own personal hand tools. * Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). * High school diploma or equivalent required. * Must possess a valid driver's license. * Valid Class-A CDL license and DOT certification PREFERRED * Experience using fleet maintenance software PREFERRED * Welding ability PREFERRED WORK ENVIRONMENT * Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. * Must be willing to work in extreme temperatures and weather conditions. PHYSICAL QUALIFICATIONS: OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: STAND: CONTINUOUSLY; WALK: CONTINUOUSLY; DRIVE VEHICLE: FREQUENTLY; SIT: FREQUENTLY LIFT: 1-10 lbs (Sedentary): FREQUENTLY; 11-20 lbs (Light): FREQUENTLY; 21-50 lbs (Medium): FREQUENTLY; 51-100 lbs (Heavy): FREQUENTLY; Over 100 lbs (Very Heavy): OCCASIONALLY CARRY: 1-10 lbs (Sedentary): FREQUENTLY; 11-20 lbs (Light): FREQUENTLY; 21-50 lbs (Medium): FREQUENTLY; 51-100 lbs (Heavy): OCCASIONALLY; Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL: FREQUENTLY; CLIMB/BALANCE: FREQUENTLY; STOOP/SQUAT: FREQUENTLY; KNEEL: FREQUENTLY; BEND: FREQUENTLY; REACH ABOVE SHOULDER: FREQUENTLY; TWIST: FREQUENTLY; GRASP OBJECTS: FREQUENTLY; MANIPULATE OBJECTS: FREQUENTLY; MANUAL DEXTERITY: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift); 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs); 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel); 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps); 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33 and $38. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___. #LI-ED1

COME WORK FOR US FOODS®! Ready to build a career with a company that’s leading the foodservice industry? We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Schedule: Sunday - Thursday Nights 3:00 PM - 11:30 PM OT Available, not required Pay range is $40 - $43 hourly based on certifications and experience. Excellent Benefits starting DAY ONE! Including: * $250 Quarterly tool allowance, that's $1,000 extra per year! * Low-cost Medical, Dental, and Vision for Family Coverage. * Paid vacation time, sick, and personal time. * Employee uniforms provided. * Employee referral program. $1,000 per referral * 401K with FANTASTIC company match! * Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! Basic Purpose: Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.). ESSENTIAL DUTIES AND RESPONSIBILITIES * Perform preventative maintenance within company standards. * Complete documentation of all repair orders, PM list and parts accountability. * Handle road service calls; perform road rescue/transport equipment as needed. * Keep track of assigned repairs by logging in and out of the software system. * Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines. * Maintain inventory and proper recordkeeping. * Backup to other maintenance shop personnel. * Willingness and capacity to assume increased responsibility and Certifications. * Performs other duties as assigned. MINIMUM QUALIFICATIONS: * Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. * Diagnostic and troubleshooting ability using fleet maintenance software. * Successfully demonstrated independent analytical and problem-solving skills. * Must furnish own personal hand tools. * Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet. * Ability to read and understand technical and service manuals. * Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills. * Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision. * Ability to adapt to changing organizational and operational needs. * Computer and software experience. * High school diploma or equivalent required. * Must possess a valid driver's license. PREFERRED QUALIFICATIONS: * JPRO software experience. * Welding ability * Knowledge with electrical schematics * Basic Microsoft Excel and Word skills. * Leadership experience or qualifications * Valid Class A CDL license and DOT certification * EPA 608 (Type 2 or Universal) certification Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting Occasionally 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $40.00 – $43.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___.

Every day, Global Payments makes it possible for millions of people to move money between buyers and sellers using our payments solutions for credit, debit, prepaid and merchant services. Our worldwide team helps over 3 million companies, more than 1,300 financial institutions and over 600 million cardholders grow with confidence and achieve amazing results. We are driven by our passion for success and we are proud to deliver best-in-class payment technology and software solutions. Join our dynamic team and make your mark on the payments technology landscape of tomorrow. Director/General Manager of Class Creator Description/Background: Pigeonhole Software - Class Creator (CC) is a proven web-based software solution that delivers automated class design and student wellbeing solutions to customers in more than 20 countries – but predominantly in Australia and the USA. Our tailor-made software automates manual tasks performed by teachers, freeing them to focus on improving school and student outcomes. Class Creator is the trusted solution of choice in over 1,500 schools around the world. Summary of the Position The Director/General Manager (DGM), Class Creator carries dual accountability of leading the CC business and carrying the responsibility for increasing revenue growth through new sales and upsell to existing clients in both established territory and breaking into new markets. CC has scaled rapidly in recent years, and the DGM will be expected to accelerate that growth in all target markets but particularly in the USA. As the most senior member and leader of the CC team, the role carries a broad remit across multiple core functions. The DGM will manage the core operations team based out of Australia which includes the development resources, (2) Developers + (2) offshore contractors, (1) Operations Coordinator, (1) AUS based Sales Representative and (1) Marketing Manager, as well as the US based team comprised of the (2) Customer Success Managers and the (2) Sales Representatives. The DGM will work closely with the AUS Finance team and AUS Marketing Director. The DGM manages various sales teams such as outsides sales, inside sales, channel sales or third party sales responsible for market penetration through campaigns that deliver incremental revenue from new and/or existing clients. Defines and communicates the sales process and the sales effectiveness drivers. Leads and fosters co-operation and collaboration with other functions within the business to maximize efficiency to provide an integrated response to clients' needs. Setting/Executing Strategy and Financial Results Create a vision for the CC Team, and to inspire and lead the broader organization to buy-in, work toward and achieve that vision. Design and execute pragmatic revenue growth plans across existing and new markets. Carry accountability for achieving allocated revenue growth targets across all assigned customer types and geographies. Manage individual performance against plans and report on performance to the leadership team at a team and individual level. Setting/Executing Sales and Marketing Strategy Develop and provide effective consultative sales support to new sales and client services team. Designs pricing models for licensing fees, annual fees, professional service fees, and value added services. Packages new products and services for cross sale to existing clients. Monitors revenue generation in order to secure delivery of financial objectives established in the annual budget. Secures invoicing and revenue recognition. Identifies, negotiates and secures potential business partnerships in order to enhance products and services to new and existing customers. Provides the oversight and control over all aspects of the sales process including qualification criteria and the allocation of leads and opportunities to sales Reps, solution design guidance and approval, content of final response, approval on final customer prices and all legal and commercial negotiation. Maintains accurate pipelines to ensure revenue forecasts are properly reported. Directs campaigns to drive market penetration. Sets the target client profile and metrics to be met by the sales team for the campaign. Approves campaign budget and agent activities and reviews results to determine further investment decisions into that market. Evaluates and assesses industry trends and specific strategies being implemented by key competitors. Works with product and other key internal stakeholders to create market competitive offerings and specific sales strategy to win business from the competition. Executing for Results Set and achieve clear and challenging goals while committing the organization to improved performance; tenacious and accountable in driving results. Provides timely and accurate commercial reporting on business performance, and is capable of presenting and explaining data succinctly and clearly to a diverse range of senior stakeholders. Must be prepared to operate across geographies, including spending extended periods of time in-market both domestically (Australia) and internationally (USA, Canada and potentially other prospective international markets). Work collaboratively across all parts of CC and the broader regional Software business to drive team and organisational success. Minimum Skills and Experience Bachelors Degree from an accredited university and relevant experience in a related field is required Experience in lieu of a degree may be considered, which is typically a minimum 8-10 years in a related profession, including a minimum of 5-6 years' experience in a managerial position Excellent problem solving, troubleshooting, consultation and negotiation skills with the ability to engage with all stakeholder levels Proficient written and verbal communications along with excellent presentation skills, attention to detail, timelines and metrics. To perform this job successfully an individual should have experience with web-based systems and corporate tools such as Microsoft 365, Oracle, Salesforce, etc Preferred Qualifications Masters Degree in a related field Related field of study from an accredited university A recognized tertiary qualification in an appropriate discipline (preferably education). Prior 3-5+ years’ experience in a similar role. Global Payments Inc. is an equal opportunity employer. Global Payments provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex (including pregnancy), national origin, ancestry, age, marital status, sexual orientation, gender identity or expression, disability, veteran status, genetic information or any other basis protected by law. If you wish to request reasonable accommodations related to applying for employment or provide feedback about the accessibility of this website, please contact ___.

We are looking for a motivated and skilled Electrical Industrial Maintenance Technician with strong electrical experience to join our team in South Plainfield, NJ JOB SUMMARY: The Maintenance Technician III supports production operations by performing preventative electrical/mechanical maintenance, troubleshoots and repairs production equipment, and performs repairs and maintenance of facility. Completes preventive maintenance and general maintenance in proper working order while abiding by all specified rules and regulations. ESSENTIAL FUNCTIONS: · Performing troubleshooting and repair on electrical/electronic, hydraulic, pneumatic mechanical systems. · Analyzing, troubleshooting, and repairing equipment. Assist with the service and repairing of more complex equipment. · Ability to repair all electrical wiring, electronic and electrical equipment (24 to 480 Volts) · Complying with applicable regulations according to OSHA and the department’s Safety program. · Troubleshoot, maintain, and repair PLC programs. · Provide scheduled and emergency repairs to production equipment during production shift. · Install and maintain production/facility equipment. · Maintain a clean and organized work area. · Adhere to safety protocols. · Perform other duties as assigned by supervisor. · Regular, reliable, punctual and consistent attendance. Must be able to work regular and/or flexible hours or shifts, overtime, weekends as required. REQUIREMENTS: · High school diploma or equivalent. Technical school preferred. · At least 3 years of mechanical and electrical maintenance experience. · Able to read electrical schematics, and mechanical Drawings · Able to perform electrical troubleshooting and have a knowledge of electrical controls. · Must have the ability to troubleshoot mechanical, hydraulics, electrical panels and electric motors. · Must have basic knowledge of lock out / tag out and PPE. · Experience in operating, troubleshooting and repairing various types of production machinery in a manufacturing environment. · Licensed electrician, preferred. PHYSICAL DEMANDS: · Frequent communication with others to exchange information. · Standing for most of the shift, walking, use hands and fingers to handle or feel objects, tools, or controls. · Reach with hands and arms; stoop, kneel, crouch, or crawl. · Frequent repetition of motions that may include the wrists, hands and/or fingers. · Frequent moving about to accomplish tasks or moving from one worksite to another. · Frequent lifting or moving objects up to 50 pounds in all directions. · Constantly thinking and processing information. · Constantly maintaining concentration and focus on tasks. WORK ENVIRONMENT: · Manufacturing floor with machinery. · Exposure to airborne particles, loud noises, and extreme heat and cold. · Use of personal protection equipment is required. DISCLAIMER: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. CSC retains the right to change or assign other duties to this position.

The Lead Maintenance Technician performs corrective and preventative maintenance, installation, repair and service of all mechanical and electrical systems. The Lead Maintenance Technician performs continuous improvements initiatives, troubleshooting, and mentoring/lead junior technicians. The lead Technician helps foster a culture of safety, accountability, and operational excellence across all plant maintenance activities. Essential Functions • Follow, without exception, all safety policies /safety rules, and procedures., • Follow all work instructions, both written and oral., • Required to keep shop and work areas in a safe and tidy condition, following 6S standards., • Required to perform all facility maintenance., • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties., • Ability to trouble shoot/solve mechanical breakdowns in areas consisting of old and new equipment, while communicating with production and maintenance manager., • Perform mechanical repairs and replace parts on machines such as bearings, valves, filters, gauges, switches, etc., • Perform routine preventive maintenance on all production equipment and machinery, such as a resistance welder, seamer, automated paint booth, conveyors, curing ovens, etc., • Assist in machine changeovers and start-up of machines for production needs when required., • To identify improvements, advise and correct potential problems., • Assist in maintaining safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency., • Perform and oversee electrical troubleshooting (AC/DC motors, controls panels motor drivers, etc.), • Ability to use ladders, scissor lift, forklift, milling machine, lathes, drill presses, welder and hand tools to complete repairs., • Ability to use precision measuring devices including amp meters, electric meters, hydraulic gauges, Etc., • Lead/coach and mentor maintenance technicians fostering skilled development and productivity., • Assign daily tasks and prioritize maintenance work orders in alignment with production needs., • Teach expertise of equipment in diagnostics and trouble shoot while providing guidance and training for all maintenance techs, • Recommend process and equipment improvements and enhance safety, efficiency, and product quality., • Collaborate with management and other departments on cross functional initiatives., • Industrial Maintenance Millwright Certificate or Qualified Mechanic., • 10 years of direct hands-on experience with production equipment maintenance and repair with 3-5 of those years in a lead role., • At least 3 years of stable work history, • Electrical knowledge of 3 phase and DC systems., • Knowledge of industrial electrical, control, and instrumentation systems. Examples include control relay logic; voltage control schemes; photo-eyes; distance and pressure transducers; etc., • Ability to operate a forklift safely to eliminate personal injury and material damage., • Ability to lift 55 lbs. overhead, climb, bend, stoop, push and pull., • Must possess excellent communication skills, professional maturity, and a proactive mindset., • Requires good eye/hand/foot coordination., • Good visual acuity – cannot be colorblind., • Must be able to stand for extended periods., • Must be able to work in cold, heat and dusty environment; it includes occasional work outside in the elements., • Ability to safely operate all equipment and tools. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental , paid time off, and other competitive benefits. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job DescriptionSalary: $20-$34 hourly Join Our Team as a Residential HVAC Technician! Who We Are! Welcome to Binsky Home Serviceyour trusted name in residential services in Central New Jersey for over 85 years! Were a union-shop company with a big family vibe, dedicated to top-notch service and craftsmanship. As a Residential HVAC Technician at Binsky, youll be part of a team that prides itself on making our customers' homes safer, more comfortable, and worry-free. For a peek into our work culture, check us out on YouTube! Click the below link to check us out on Youtube! Binsky Home Service What We Offer Being part of our team comes with perks beyond the paycheck! Heres what youll enjoy: • Union Benefits: Comprehensive health and retirement plans., • Career Growth: Training programs that help you reach new levels in your trade., • Professional Development: Tools and support to keep you at the top of your game. Why We Need You! Were looking for talented, customer-focused HVAC Technicians like you to keep our service top-tier and help us continue to grow and succeed! About the Role As a Residential HVAC Technician, youll handle everything from troubleshooting to maintaining and installing top-quality HVAC systems. Your day-to-day will involve: Key Responsibilities: • Assembling, installing, testing, and maintaining HVAC systems, equipment, and components., • Diagnosing and resolving issues swiftly to keep customers comfortable., • Ensuring all equipment complies with regulatory codes., • Using a wide array of tools, from basic hand tools to precision instruments, safely and effectively., • Skills & Attributes: Excellent organizational and time management skills, a can-do attitude, and a passion for problem-solving!, • Experience: Residential experience is required, and an Electrical License is preferred (not mandatory)., • Customer-Focused: Great communication and integrity are musts.

Job Description Job Title: Commercial HVAC Service Technician Job Location: Edison NJ Operating Company: Energy Transfer Solutions FLSA Status: Non-Exempt About: Under the guidance of the Service General Manager, the Commercial HVAC Service Technician plays a key role in delivering top-tier service to our customers by expertly installing, servicing, and starting up a wide range of HVAC systems. From first-time installations to diagnosing and repairing complex issues, you’ll be the go-to problem solver our customers count on. Energy Transfer Solutions - A member of the AIR Control Concepts family. Overview: Energy Transfer Solutions is your trusted partner for innovative HVAC solutions. Since 2003, we’ve provided premier equipment, parts, controls, and services to commercial and industrial clients across PA, NJ, and DE. Our expert team delivers tailored solutions, from system design to turnkey installations, ensuring optimal performance and efficiency. With a focus on quality, integrity, and customer success, ETS is committed to enhancing your building's comfort, reliability, and value. Check out our website: Specialty HVAC Solutions, Parts & Services | ETS HVAC Essential Duties and Responsibilities: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where neededExperience & Requirements:, • 3–5 years of commercial HVAC service experience with systems such as VRF, rooftop units, and packaged equipment., • EPA Universal Certification required; OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record; able to pass a background check and drug screening., • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces., • Willingness to participate in an on-call rotation for emergency service coverage. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education., • Company Perks – Uniforms, vehicle and phone (as applicable), and a supportive team environment that values your expertise. Air Control Concepts & Energy Transfer Solutions are Equal Opportunity Employers. Powered by JazzHR UCBo9TFXae

Job DescriptionBenefits: • Employee discounts, • Health insurance, • Paid time off, • 401(k) matching, • Company car, • Dental insurance, • Flexible schedule, • Free uniforms, • Vision insurance, • Training & development Employer Provided Wages: $25-$38+ Per Hour (Based on experience and Qualifications ABOUT US: AK AIRE LLC Home Service (AKAHS) is located In Middlesex County as is a New Jersey based residential contractor specializing in service, installations, and maintenance in the trades of Plumbing, Heating, Air conditioning, Electrical and Generator systems. AKAHS, has been providing New Jersey Homeowners quality services since 2007, we have been in business for 19 years with 85% repeat business. We are growing our HVAC Division to have an immediate opening for service technicians. We are looking for highly motivated and hardworking individuals to join the company. Our Service Areas include, but not limited to, Middlesex County, Monmouth County, and Ocean County. We focus on the residential marketplace with light commercial. Become part of a team dedicated to safe, quality work. Job Responsibilities : • Perform on-site preventative maintenance, diagnostics, repairs and troubleshooting for customers Hot Air Furnace, Air Handlers, Condenser, Heat Pump, etc., • Ability to deal effectively with customer service and technical problems by using experience and personal influence to provide resolution with supporting documentation and explanations of service performed or parts used., • Travel to job sites in service area, and work with dispatch to ensure schedule is maintained and delays are properly communicated to customers, • Be available to work nights or weekends, on a rotating basis, to service emergency needs or our customers, • Maintain proper stock, parts, tools and safety equipment in the vehicle. Document all installed equipment upon arrival; make, model, serial number , type of fuel, necessary test measurements, and pictures as needed., • Diagnose diverse service issues, obtained any replacement parts, calibrate systems to manufacturer's recommendations., • Complete and submit work orders, • Other duties and responsibilities as they are assignedRequirements:, • Minimum 3-5 year experience in maintenance, troubleshooting and correcting diverse HVAC issues, • Excellent verbal & written communication skills., • Ability to work independently in a timely manner, making sure the job is done correctly the first time., • Strong organization skills with close attention to detail., • Ability to multi-task & Prioritize., • Establish & maintain good working relationship with coworker and management., • Team player with a positive attitude. Other Requirements: • well groomed, neat appearance, • valid drivers license and clean driving record, • valid social security number, • Some computer skills, tablet, or phone, • Lift up to 50 pounds,; be able to push, pull, carry or maneuver heavier items (with additional manpower or appropriate devices)/ carry ladders; work from heights, work in small crawl spaces, • Observe all company procedures and safety rules Work as part of our team to ensure customer satisfaction Work Remotely: NO Job Type: Full-Time Pay: Starting $25-38 per hour based on qualifications Benefits: • 401(k), • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time off, • Tuition reimbursement, • Paid Training, • Paid Holidays, • Company Truck Flexible Schedule: • Monday to Saturday, • On Call (Limited), • OvertimeSupplement Pay types:, • Bonus Pay, • Commission PayExperience:, • HVAC Service: 3-5 Years, 5 years PreferredLicense/Certifications:, • EPA CertificationWork Location: On the Road Office Location: 1583 Livingston Ave, North Brunswick NJ 08902. Employer Provided Wages: This employer has provided their official estimate of the base salary they intend to pay for this job. Note that this is a range and an estimate, and this number is not guaranteed. An employers actual offer would depend on a candidates skills and level of experience. Employers may offer this job to a candidate at a salary outside of this range at their discretions.

Job DescriptionCommercial HVAC Service Technician – REIC Rentals Are you looking to apply your Commercial HVAC expertise with a well-established, customer-focused leader in construction and industrial climate control equipment rentals? REIC Rentals is hiring safety- and customer-driven Commercial HVAC Service Technicians to serve as trusted technical experts responsible for keeping our high-performance rental fleet operating at peak performance. From heating and cooling to dehumidification, ventilation, and environmental control equipment, your work ensures our equipment is safe, reliable, and always customer-ready-both in the shop and at customer sites. About Us REIC Rentals is a trusted, full-line equipment partner supporting projects across North America. With 55 locations, we serve the Oil & Gas, Construction, Industrial, and Event sectors. Our mission is to deliver high-performance equipment, expert support, and innovative, sustainable solutions that raise industry standards. Why Join Us * Schedule: Monday–Friday, 7:00 AM–5:00 PM (scheduled on-call rotations) with overtime opportunities * Comprehensive benefits after 60 days, including medical, dental, vision, PTO, and 401(k) with company match * Tuition and certification reimbursement plus ongoing technical training * Clear career advancement paths in a rapidly growing company * Employee referral bonus program * A culture built on safety, teamwork, and customer satisfaction What You'll Do * Maintain, troubleshoot, and repair commercial HVAC rental equipment in the shop and on customer job sites * Accurately diagnose mechanical, electrical, and control system issues * Read and interpret electrical schematics and blueprints * Provide hands-on customer support and basic equipment operation training * Document service work thoroughly using modern service management systems * Travel to customer sites and support seasonal overtime demands * Maintain a strong safety focus on the road, in the shop, and at customer locations What You'll Bring * 3+ years of technical experience in HVAC, equipment service, field maintenance, or related work * Strong mechanical and electrical troubleshooting skills * Demonstrated safety-first mindset in shop and field environments * Clear, professional communication skills with customers and teammates * EPA Universal Certification and 3–5 years of HVAC/R experience strongly preferred * Clean driving record and minimum age of 21 * Ability and willingness to travel to customer sites * Flexibility to handle changing daily priorities and seasonal overtime #StepIntoSuccess REIC Rentals does not accept solicitation from third-party recruiters or staffing agencies. REIC and all affiliates operate as drug-free environments, which includes marijuana. A pre-employment drug screening that tests for THC and other drugs, as well as a full background check, is required of all newly hired employees. Job Posted by ApplicantPro

Job Description • Are you ready to start a rewarding heating and cooling career?, • Competitive pay, • Paid vacation time, • Health Insurance, • Bonuses and contests As our HVAC Service Technician, you'll get the chance to service, troubleshoot, maintain, and repair both heating and cooling systems, all while being guided by some of the best HVAC technicians in the area! Whether it's troubleshooting an issue or performing routine maintenance, every day brings new challenges and opportunities to refine your skills. Don't worry – if you don't have experience, we'll train you from the ground up. We're committed to helping you grow and succeed in this skilled trade! THE QUALIFICATIONS: • Reliable transportation, • Authorization to work in the United States While some experience as an HVAC technician would be great, we will train the right candidate to thrive in this role. JOIN US! We're a team that values craftsmanship, customer satisfaction, and a positive work environment. When you join us, you'll be part of a company that invests in your growth with ongoing training, competitive pay, and a supportive team that treats you like family. If you're looking for a career where your skills are valued and your hard work is rewarded, Air Professionals Heating & Air Conditioning is the place for you! Our initial application is quick, easy, and mobile-friendly! Job Posted by ApplicantPro

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed

Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, Fairway Market, and Di Bruno Bros. Wakefern provides independent retailers with the tools, innovation, and operational support needed to compete in a big-business world. Our teams leverage advanced technology, private label development, and best-in-class procurement practices to help member companies deliver exceptional value and service throughout the communities we serve. Summary This role supports both Oracle E‑Business Suite (EBS) development and SAP operational support. The Oracle portion focuses on development, enhancements, and troubleshooting within the Financials suite, while the SAP portion centers on supporting SAP processes—especially SAP BDC, data validation, and financial workflows. Additionally, this role contributes to cross‑platform AI initiatives and financial analytics, helping the organization leverage data insights, automation opportunities, and process optimization across ERP systems. Essential Functions Oracle EBS Development: • Develop, support, and enhance Oracle E‑Business Suite Financials modules (GL, AP, AR, Purchasing, iProcurement, Fixed Assets)., • Troubleshoot technical and data-related issues using PL/SQL and SQL tools., • Write functional and technical specifications based on business requirements., • Develop reports, forms, workflows, and integrations using Oracle tools (Reports, Forms, APEX, BI Publisher, ADF)., • Collaborate with finance and business teams to analyze requirements, design solutions, and support end users., • Prioritize tasks, manage project milestones, and drive development activities to completion. SAP Support & Enhancements • Provide day-to-day SAP support with emphasis on SAP BDC ., • Build, test, and maintain SAP BDC scripts to support batch-input processes., • Troubleshoot SAP issues, perform root-cause analysis, and assist with configuration or master data validation., • Support functional teams across finance-related SAP processes and data flows., • Document SAP processes, support knowledge transfer, and provide user assistance as needed., • Additional Functions, • Support development of AI-driven automation, machine learning insights, and predictive analytics for finance operations., • Develop dashboards, data models, and cross-system reporting integrating Oracle and SAP data., • Participate in continuous improvement initiatives, system upgrades, and cross-functional IT projects., • Assist in data governance, data quality review, and financial reporting accuracy initiatives. Qualifications • BS in Computer Science, Information Systems, or equivalent professional experience., • Strong analytical and problem-solving skills with the ability to work independently., • Excellent written and verbal communication skills, especially translating business needs into technical solutions., • Ability to organize workload, manage priorities, and meet deadlines in a hybrid-tech environment. Preferred • 5+ years of experience with Oracle EBS Financials (GL, AP, AR, Purchasing, iProcurement, Fixed Assets)., • Proficiency in PL/SQL, SQL Plus, and writing SQL queries for troubleshooting., • Experience with Oracle development tools: Reports, Forms, APEX, BI Publisher, ADF., • Experience using TOAD for Oracle., • SAP experience including SAP BDC development and SAP finance processes., • Experience with AI/ML tools or financial analytics platforms (Power BI, SAP Analytics Cloud, Python, etc.)., • Familiarity with retail financial systems and operational workflows., • Experience with Oracle WebCenter (WFR, SOA, Capture, IPM) is a plus. Working Conditions & Physical Demands This position requires in-person office presence at least 4x a week in Edison, NJ

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, Fairway Market, and Di Bruno Bros. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. Summary The network telecommunications project manager position is responsible for reviewing, presenting and implementation of the design, installation (build, config, test, and deploying), and ensuring the maintenance and support of the company’s network telecommunications systems, including telephone, data, and video systems. They manage and supervise network telecommunication teams and work towards improving system performance, maintaining and reducing costs. Essential Functions • Oversee the design, installation, and maintenance of network telecommunications equipment and systems, • Assess and recommend network telecommunications equipment to meet organization’s needs, • Manage and supervise the network telecommunications team, providing training and development opportunities as needed, • Monitor and test system performance and provide regular reports on telecommunications operations, • Develop and implement policies and procedures for the telecommunications department, • Coordinate with other department managers to identify and resolve telecommunications problems, • Ensure compliance with laws, regulations, and organizational policies related to telecommunications Additional Functions • Manage and negotiate contracts with network and telecommunications service providers, • Plan and manage the department budget and control expenditure, • Stay updated with advancements in the field of telecommunications and implement new technologies to enhance service Qualifications • Proven experience working in networking and telecommunications, • Thorough understanding of networking and telecommunications systems infrastructure, • Excellent knowledge of VoIP, SIP, carrier telecom technology options: DIA, broadband communication, private ethernet and network protocols; EIGRP, BGP, OSP, • Infrastructure platforms Cisco SD-WAN, VManage, Aruba Central, Aruba ClearPass, Cisco UC, Call Manger, Webex and Webex Room Kits, Cisco Smart Boards, • Ability to manage small internal team and managed service partners, and work collaboratively with other technical teams and business departments, • Experience in strategic planning and budgeting, • Strong problem-solving skills and ability to think analytically, • Proficiency in project management and good organizational skills, • BSc degree in Computer Science, Engineering, or related field Working Conditions & Physical Demands • Availability to work a varied, flexible schedule to meet business demands, • Ability to operate a computer screen for long periods of the business day, • Ability to work a hybrid schedule as established by the division (4 days on-site, 1 day remote), • Ability to travel planned to our other locations, member stores,, • Ability to lift and install network components in assisting network technicians. 1. Network & Telecom Infrastructure Expertise A telecom manager must understand the design, deployment, and support of: • VoIP / SIP systems, • LAN (Layer 2 & 3), • Routers (IOS, SD-WAN, DMVPN), • Firewall Concepts, • Carrier circuits (PRI, SIP trunks, DIA, MPLS, DIA, Broadband, Private Ethernet, SD‑WAN, Cellular), • Structured cabling (Cat5e/6/6A, fiber Single Mode& Multi Mode) 2. Vendor & Contract Management Telecom involves multiple external providers — carriers, installers, maintenance teams. Key abilities include: • Negotiating pricing for circuits, SIP trunks, and services, • Managing SLAs and service credits, • Evaluating RFPs and proposals, • Overseeing installation and cutovers 3. Troubleshooting & Incident Management Telecom touches voice, data, networks, cabling, and users — so when something breaks, everyone feels it. Critical troubleshooting capabilities include: • Root‑cause analysis, • Reading call logs, MOS scores, trace routes, packet captures, • Understanding QoS, jitter, latency, packet loss 4. Project Management & Deployment Leadership Telecom projects (cutovers, site builds, remodels, upgrades) require: • Scheduling and coordination, • Budgeting, • Risk assessment, • Stakeholder communication, • Documentation & as‑built creation 5. Strategic Planning & Technology Modernization A great telecom leader doesn’t just maintain current systems — they plan for what's next. Includes: • Evaluating cloud voice platforms (Teams, Webex, etc..,), • Planning circuit and bandwidth upgrades, • Lifecycle planning for routers, switches, phones, video rooms, UPS, cabling, • Security considerations (voice & data security, carrier fraud, SIP security), • Aligning network communication with broader IT strategy Company Perks • Vibrant Food Centric Culture, • Comprehensive medical, dental and vision package, • Competitive Salary and Paid Time Off, • Fitness Reimbursement and Well-Being Program, • Corporate Training and Development University, • Collaborative team environment, • Paid Parental Leave, • 401K, • Matching Gifts and Community Volunteer Involvement

Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, Fairway Market, and Di Bruno Bros. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. About You Job Summary We are looking for an experienced SAP Integration Developer to design, develop, and maintain robust integration solutions between SAP systems and various internal and external applications. The ideal candidate will have deep knowledge of SAP integration tools such as SAP PI/PO, SAP CPI (Cloud Platform Integration), BTP, IDocs, BAPIs, RFCs, and APIs. This role is critical for ensuring data consistency, data exchange, system efficiency, and seamless business process execution across enterprise applications Key Responsibilities • Design and implement secure, scalable integration solutions to enable data exchange between SAP and non-SAP systems, including legacy applications and external platforms, • Work closely with business analysts, functional consultants, and end-users to understand business requirements and translate them into technical specifications, • Build and configure integration flows, mappings, APIs, and other components using SAP's CIA and PIPO middleware tools. This often involves using protocols like REST, SOAP, SFTP, and OData, • Work with third-party vendors and external systems to implement external integrations (e.g., logistics, finance, BI systems), • Create test plans, execute test cases (unit and integration), and validate test data to ensure the quality and reliability of all integration processes, • Diagnose and resolve technical issues and performance bottlenecks in existing interfaces, providing ongoing maintenance and support, • Create and maintain technical documentation, including solution designs, test scripts, and usage guidelines, • Promote development standards and best practices for integration, and perform code reviews for other team members, • Guide and mentor junior team members on integration services and processes, • Keep up-to-date with new SAP integration technologies and recommend improvements Skills and Qualifications Required • A bachelor's degree in computer science, information technology, or a related field, • 10+ years of experience in SAP Integration development, • Hands-on experience with SAP CPI, PIPO and BTP, • Proficiency in scripting languages such as Groovy or JavaScript, • Strong knowledge of various communication adapters (e.g., IDOC, SOAP, REST, FILE, SFTP, JDBC, RFC) and API development, • Familiarity with data formats like XML, JSON, and EDI, • Expertise in ABAP, with a focus on integration-related objects like proxies, BAPIs, and IDocs, • Configuring all the adapters of PO 7.5 like File/FTP, Http/Https, JDBC, Mail, RFC, IDOC, XI, JMS and SOAP, SFTP AND OFTP, • Strong experience with PI/PO configuration, complex mapping transformation and development, • Extensive PI monitoring and architecture knowledge, • Configure and customize of PI-Basis functions like setting up of RFC Destinations, Port and Partner Profiles, • Should be proficient in developing Enterprise System Repository (ESR) and Interface Registry (IR) objects, Graphical and Java mapping and proficient on XML Technologies., • Experience in developing / configuring SAP PI BPMs, Web Services and SOA scenario Experience with Java Development, Java Maps and XML Preferred • SAP certifications in integration technologies, • Experience with S/4HANA integration, • Knowledge of DevOps practices and tools for CI/CD in SAP environments, • Experience with other middleware platforms (Dell Boomi, MuleSoft, etc.), • Exposure to Event-Driven Architecture and Message Brokers (Kafka, RabbitMQ), • A background in key SAP modules such as RTR, OTC, P2P, WM, MDM and POS are a plus, • At least two full-lifecycle implementation projects in S/4HANA, • Strong knowledge in integration of SAP and Non-SAP applications including retail POS systems Soft Skills: • Strong analytical and troubleshooting skills, • Ability to work independently and in a team, • Clear and professional communication with technical and non-technical stakeholders, • Ability to manage multiple tasks and prioritize effectively Working Conditions & Physical Demands • Availability to work a varied, flexible schedule to meet business demands, • Ability to monitor computer screens for long periods of time, • Ability to work a hybrid schedule as established by the division (4 days on-site, 1 day remote) Core Competencies • Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two-way communication., • Build Relationships: Creates cross-functional partnerships through the development and maintenance of constructive and cooperative relationships., • Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work., • Embrace Change: Looks for new ways of working by supporting advancements in processes and technology., • Develop You: Identifies and capitalizes on opportunities for personal and professional career growth., • Drive for Results: Supports divisional and strategic objectives through achievement of work goals. Compensation and Benefits The salary range for this position is $120,000 to $175,000. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, and Gourmet Garage® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. About You We are seeking a skilled and motivated COBOL Programmer to join our technology team supporting the Merchandising and Finance departments. This role is ideal for someone with strong mainframe development experience who thrives in a collaborative environment and is passionate about delivering reliable, scalable solutions. Key Responsibilities • Develop, maintain, and support mainframe applications using COBOL, CICS, JCL, SQL, and DB2., • Collaborate with business analysts and stakeholders to gather and analyze requirements., • Design and implement efficient database structures and queries to support business processes., • Provide production support, troubleshoot issues, and implement timely fixes and enhancements., • Participate in code reviews and contribute to continuous improvement initiatives., • Document technical specifications and maintain system documentation., • Work closely with cross-functional teams to ensure seamless integration of systems and data. Required Qualifications To be considered for this role, candidates must meet the following minimum requirements: • Bachelor’s Degree in Computer Science, Information Systems, or a related field, or equivalent professional experience., • Proven experience in software development, including:, • Requirements analysis, • Relational database design, • Production support and troubleshooting, • 5+ years of hands-on experience with mainframe technologies:, • COBOL, • CICS, • JCL, • SQL & DB2, • Strong problem-solving skills and the ability to recommend effective solutions., • Excellent verbal and written communication skills., • Demonstrated ability to write clean, readable, and maintainable code., • Self-motivated with a strong desire to learn and grow professionally. Preferred Qualifications • Experience with Java or other modern programming languages is a plus., • Familiarity with Agile methodologies and DevOps practices is advantageous. Working Conditions Location: Edison, NJ Tech Office Onsite: 4 days per week Remote: 1 day per week

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, and Gourmet Garage® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. Summary As a member of Wakefern Tech’s HR/Legal Systems team, this role will support and enhance Wakefern's HCM platform, including configuration, troubleshooting, and developing SQL-based reporting. This role involves working closely with various areas across the enterprise (including corporate, warehouse, retail, and member locations) to understand their needs and architect the appropriate HCM related solutions. Essential Functions • Participate in the project development lifecycle for HCM related systems including, but not limited to:, • System design, configuration, and integration, • System testing and validation, • System implementation, • Provide ongoing system support including, but not limited to:, • Ongoing work related to system upgrades, enhancements, production fixes, etc., including the testing and rollout of new features and functionality, • Provide day-to-day HCM related system support including application configuration changes, incident troubleshooting and resolution, and ongoing system maintenance activities, • Develop and optimize SQL queries for data extraction, audits, and analysis, • Build and maintain custom reporting and dashboards using SQL and/or other appropriate tools, • Build and maintain integrations with both external vendors/systems and internal systems, • Support data integrity, auditing, and audit reconciliation efforts, • Partner with stakeholder teams around the enterprise to identify opportunities for platform enhancement/improvement and work with the project team to translate these requirements into system solutions, • On call support after hours and on weekends as needed Qualifications • Bachelor’s degree in Information Systems, HR Technology, or related field preferred, • 5+ years supporting an enterprise HCM system, • Proficiency with modern cloud-based HCM platforms such as Dayforce, Workday, UKG, Oracle Fusion, or comparable system, • Strong SQL skills for queries, troubleshooting, and reporting, • Experience developing custom HCM reports, • Strong analytical and communication skills Working Conditions & Physical Demands • Standard office environment; ability to work on a computer for extended periods., • This position requires in-person office presence four days per week Competencies • Problem Solving, • Communication, • Technical Expertise, • Collaboration Compensation and Benefits The salary range for this position is $81,224 - $175,396. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Job Description: • We are seeking a highly skilled and motivated Engineering Manager to lead our deep drawn metal stamping operations., • This role is critical in driving innovation, optimizing production processes, and ensuring the highest product quality standards., • The ideal candidate will have a robust engineering background, extensive experience in metal forming processes, and proven leadership abilities to guide a dynamic team in a fast-paced manufacturing environment., • Work Environment: The Engineering Manager will operate primarily in a manufacturing facility setting, which includes exposure to machinery and safety hazards. Safety measures and protocols must be strictly adhered to at all times. Responsibilities: • Directly supervise and mentor a diverse team of engineers and technical staff, encouraging professional development and fostering a collaborative culture that promotes innovation., • Facilitate cross-departmental collaboration by working closely with production supervisors, quality assurance teams, and design engineers to streamline operations and enhance overall productivity., • Design, implement, and refine efficient manufacturing processes specifically for deep drawn stamping applications, focusing on maximizing throughput while minimizing scrap and rework., • Apply lean manufacturing principles, Kaizen events, and Six Sigma methodologies to identify and eliminate bottlenecks, increasing operational efficiency year over year., • Provide advanced technical support related to tooling design, material selection (e.g., various grades of steel, aluminum, and specialty alloys), and stamping operations to uphold engineering best practices., • Lead troubleshooting efforts for complex manufacturing issues, employing root cause analysis techniques to develop effective solutions that prevent recurrence., • Oversee multiple engineering projects from initial concept through to final implementation, ensuring projects meet established timelines and budgetary constraints while fulfilling customer requirements., • Engage directly with clients on custom projects, translating technical specifications and ensuring final products consistently meet rigorous quality benchmarks., • Establish and continuously improve comprehensive quality control procedures and metrics, conducting periodic audits and assessments to ensure manufacturing processes adhere to ISO 9001 standards., • Develop and manage robust testing and inspection protocols, utilizing advanced measurement techniques (e.g., laser scanning, CMM) to guarantee product reliability and safety., • Prepare and manage departmental budgets, conducting cost analyses to identify potential savings and justify capital expenditures for process upgrades and equipment acquisitions while maintaining high-quality output., • Collaborate closely with suppliers and vendors to source high-quality materials and components, negotiating favorable terms and establishing long-term partnerships that benefit production efficiency and cost-effectiveness., • Ensure all manufacturing processes fully comply with industry regulations, ISO standards, and environmental guidelines. Maintain awareness of changes in regulations and anticipate their impact on production practices. Requirements: • Directly related experience in metal stamping, with specific expertise in deep drawn processes and high-volume production environments., • Demonstrated leadership skills, with proven success in managing teams in manufacturing settings and achieving key performance metrics., • Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering simulation tools for process design and analysis., • Strong problem-solving skills, with an analytical mindset and keen attention to detail, capable of addressing complex engineering challenges., • In-depth knowledge of ISO standards, industry best practices, and quality management systems applicable to manufacturing processes., • Excellent communication and interpersonal skills, with the ability to effectively convey complex technical information to various stakeholders. Education: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related engineering field (Master's degree or relevant certifications preferred).

Job description Founded in Toronto, Real Fruit Bubble Tea has been committed to making fresh fruit drinks healthy and accessible for anyone to enjoy since 2002. We have over 137 locations across Canada and USA. As a rapidly expanding business, we want you to join our team and grow with us! There is huge potential for growth, and we welcome anyone who is up to a challenging yet rewarding journey! Position Description Reporting to the I.T. Manager and above, the position is responsible for coordinating and troubleshooting POS systems, internet connections, installations, debit and credit machines, and all related technological areas of the organization. They will also assist the I.T. Manager with departmental and company-wide projects as needed. Additionally, this role requires assisting in store operations and supporting daily store activities on a weekly basis, including preparing drinks and helping with customer service. Expectations of the Successful Candidate • New graduates are welcome!, • No previous work experience is required, training will be provided., • Excellent communication skills (written and verbal) and interpersonal skills., • Effective time management, decision-making, and problem-solving skills with a meticulous attention to detail., • Strong ability in working with Microsoft Office suite applications., • Strong multitasking skills and ability to perform tasks effectively under pressure., • High level of organizational capabilities., • Provide strong support to the Store Manager in ensuring smooth operations., • Excellent written and verbal communication skills in English; proficiency in Mandarin/Cantonese (written and verbal) is an asset Duties and Responsibilities • Assist in daily store operations, including prepping ingredients, making beverages, and maintaining cleanliness., • Support store manager with staff supervision, ensuring smooth operations and excellent customer service., • Manage inventory, stock levels, and order supplies to keep the store running efficiently., • Manage and provide technical support for POS systems, network connections, debit/credit machines, and other I.T. services to meet operational needs., • Serve as the I.T. liaison with administrative and operational teams to understand and address technology concerns., • Collaborate with departments and store/regional managers to ensure I.T. integration aligns with business needs and project requirements., • Participate in the development and implementation of I.T. policies, procedures, and service offerings to maintain consistent and efficient operations Job Type: Full-time Salary: $75,000 We’re committed to being transparent and fair about pay. The salary provided is a guideline and not a guaranteed offer. Final compensation is determined based on the responsibilities of the role, market data, internal equity, and several individual factors, including overall and relevant experience, education, certifications, skills, expertise, and the location of the position. Transportation: This position requires travel; candidates must have access to a reliable vehicle.

Machine Operator Location & Employment Type Full-Time | 2nd Shift Opportunity Schedule: • 1st Shift: Monday – Friday | 6:00 AM – 2:30 PM Pay Rate: $23.00 / hour Type: Temp-to-Hire Position Summary We are seeking a reliable and detail-oriented Machine Operator to join our production team. In this role, you will set up, operate, and monitor high-speed packaging and carton flow equipment. You’ll ensure machinery runs efficiently, perform changeovers, and maintain quality and safety standards in a fast-paced manufacturing environment. Key Responsibilities • Set up and operate production machinery according to established procedures., • Monitor equipment performance and make adjustments to maintain quality and efficiency., • Perform changeovers between production formats and assist with troubleshooting., • Conduct pre-operation checks and basic preventative maintenance., • Communicate with team members and supervisors to maintain continuous production flow., • Follow cGMP standards, food safety regulations, and plant safety guidelines., • Keep machines and work areas clean, organized, and safe., • Minimum 1 year of machine operation experience in a high-speed manufacturing environment., • High school diploma or equivalent., • Ability to read, write, and communicate effectively in English., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • Willingness to be trained and adapt to new processes., • Basic math and computer skills., • Ability to lift up to 50 lbs frequently., • Standing, walking, pushing, and pulling throughout the shift., • Moderate exposure to manufacturing conditions (temperature, noise, fumes, dust). If you’re ready to take on a key role in manufacturing operations and grow within a dynamic team, apply today to join us! ABOUT US PrideNow is Pride Global’s light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with Pride Global’s mission, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates are proud to be equal opportunity employers. All qualified applicants will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status.

THE POSITION IN A NUTSHELL Sciens Building Solutions is seeking an experienced Senior Fire Suppression Service Technician to inspect, service, test, and maintain suppression systems, including, but not limited to fire extinguisher and kitchen hoods. Customer and employee interface require a high degree of effective human relations. Communication skills, both verbal and written are important elements of the position. WHAT YOU'LL BE DOING (and doing well!) • Inspect, service, test, and maintain fire suppression systems, including fire extinguishers and kitchen hoods., • Complete basic to standard level complexity repair of fire extinguishers, systems cylinders, and DOT-specified cylinders., • Produce detailed commissioning and inspection reports in accordance with NFPA., • Responsible for complex troubleshooting and effective resolution., • Responsible for vehicle inventory., • Ensure facility and inventory is kept in a safe and orderly state., • Provide support, guidance, and expertise to the other technicians., • Ability to manage job scheduling and job progress in an efficient and cost-effective manner, with a strong focus on quality., • Proficient in issue resolution., • Excellent organizational, decision-making, and communication skills., • Knowledge of fire protection industry and products., • Work with customer(s) to perform deficiency repairs., • Identify opportunities to perform inspections at new customer sites., • Identify opportunities to upgrade current equipment according to code requirements., • Maintain and in-depth knowledge of complete line of products/services and customer requirements through in-house training, networking, and research., • Utilize approved marketing materials to present sales presentations and proposals to prospects, ensuring the customer understands our value proposition, positive features, and advantages of our products and services over those of the competition., • Independently establish call plans and customer follow up strategies and tactics; consistently apply time and territory management techniques., • Knowledge of OSHA safety standards. WHAT WE LIKE ABOUT YOU • High school diploma or equivalent., • 5+ years of experience in a technician role within the fire suppression environment., • Able to work with a sense of urgency under tight deadlines, • Knowledgeable in fire suppression or related code requirements., • Able to pass a background check, drug screen, and driving record screening according to required guidelines., • Competitive salary based on qualifications., • Paid time off plan and holidays., • 401(k) matching., • Short term and long-term disability., • Medical, dental, and vision plans with options., • Life insurance., • Company cell phone, laptop, and vehicle., • Professional career development opportunities., • Tuition reimbursement.

We are a leading global manufacturer of electrical interconnects and power distribution solutions. Our North American Headquarters is located in Central New Jersey directly off Route 287 is where we maintain significant “on-time” inventory of electrical interconnects that are produced in our factory in Germany. In addition, we are a UL Listed assembly operation that manufactures portable power distribution, control panels, and power cable assemblies. Due to our rapid growth and expansion, we are currently seeking a Desktop and Network Support Administrator to provide comprehensive technical support for our office and remote-based staff. . The successful candidate will be responsible for assisting to support our IT environment including Desktop Computers, Laptops, Servers, MFA, Printers, Routers, Switches, and other Network Periphals , ensuring reliable day-to-day operations and excellent end-user experience for all staff. The ideal candidate is hands-on, organized, and comfortable supporting both hardware and software while working directly with end-users. Key Responsibilities: End-User Technical Support • Provide on-site and remote support for employees’ IT issues, • Troubleshoot and resolve problems with desktops, laptops, monitors, printers, and peripherals, • Assist users with software applications, logins, and basic IT training, • Set up, configure, and deploy new computers, laptops, and mobile devices, • Perform routine maintenance, upgrades, and troubleshooting, • Support office LAN and Wi-Fi connectivity, • Assist with basic network troubleshooting (IP/DNS issues, connectivity/access problems), • Help maintain routers, switches, access points, and network cabling, • Perform system updates, patches, and routine security checks, • Assist with data backups and basic recovery procedures, • Follow IT security policies and best practices, • Support account management, permissions, and password resets, • Document technical issues, solutions, and procedures, • Maintain accurate records of IT assets and configurations, • Identify opportunities to improve IT processes, reliability, and user experience Qualifications & Skills: Required • Bachelor’s degree or equivalent experience in Information Technology or related field, • 4-6 years of experience in IT support, help desk, or office IT roles, • Strong knowledge of Microsoft Windows OS environments, Microsoft 365, Active Directory, • Experience supporting printers, laptops, desktops, and office hardware, • Strong understanding of OSI networking concepts (LAN, Wi-Fi, DHCP/Static IP addressing, etc.), • Experience supporting office VOIP phone systems., • Occasional after-hours support for system updates or urgent issues, • Strong customer service, communication, and problem-solving skills, • May require lifting and moving IT equipment (up to 40 lbs.) Strongly Desired · CompTIA A+ Certification · Microsoft Certified Professional accreditation · Microsoft Certified Systems Engineer accreditation · Other IT related certifications or degrees Annual Salary Range: $80,000-$95,000 Benefits include medical, dental, vision, life insurance, 401K, paid time off.

Duration: 06 Months (Possibility of extension/conversion based on performance and budget) Client: One of the largest pharma companies in the US Overview: The IT Engineer is responsible for managing day-to-day end user and GMP machines support as well as L1 support on Servers (on-prem/cloud), networking, telecommunications & cyber security tools in the Lupin Pharmaceuticals North American GMP compliant sites, including Data Centers, Cloud, Network, Communication link services. Duties: • Respond, manage, and escalate (as needed) technical support requests via the ticketing system, telephone calls, and emails either directly or using remote support tools., • Responsible for supporting Business user end point devices (Laptops/desktops/Smart phones/Tablets /video conferencing services) either directly or using remote support tools on as-needed basis., • Ensure compliance of regulatory requirements including cGMP standards and site-specific SOPs when completing assigned functional activities., • Manage and maintain analytical laboratory and computerized manufacturing control systems in a GMP environment according to established regulatory requirements., • Working knowledge of networking concepts such as Routing, Switching, VLANs, VPNs, DHCP and DNS., • Perform L1 tasks on Server, Network and Telecom Infrastructure in Lupin USA & Canada as needed., • Assist Core teams in performing L1 troubleshooting tasks on Security tools, technologies & platforms like Crowdstrike, Zscaler, Zero Trust, Privileged access management., • Hands-on experience with Windows 10/11, Microsoft Office tools, common business applications, digital signing applications, Adobe software, Apple devices and L1 knowledge of Windows Server operating systems, Virtualization Hypervisors like VMWare and Wireless Networking devices like Aruba/HPE., • Has good knowledge for troubleshooting Microsoft 365 and Microsoft Teams rooms (conferencing systems), • Oversee and ensure timely repair/replacement of faulty hardware including endpoint devices, network hardware and appliances., • Maintain inventories of endpoint devices, GMP assets and applications., • Ensure 100% compliance with the GMP Policies and Procedures. Qualifications: • Bachelor’s degree (IT) or similar Desired Certifications., • Certifications (preferred) – Current JNCIE-ENT, JNCIE, or CCIE certification/ CCNP, CEH, CISSP, MCSA etc., • 3 – 5 years’ experience working in a GMP compliant pharmaceutical laboratory/manufacturing environment., • Working Knowledge of Cisco, Juniper, Aruba Technologies & Architectures (examples- Cloud & Cloud Security, Networking- Network Segmentation, Patching, Next-Gen AV, Avaya VOIP, Teams based Conferencing systems), • Experience managing and maintaining servers, LAN, IP Phone and WAN systems; Switches/ Routers/ Access Points, VPNs; Knowledge of IT-OT Network Segregation., • Well versed on GMP Infrastructure and Applications used in Manufacturing and Laboratories.

Description: • The Downstream Manufacturing Scientist is a hands-on position responsible for executing purification of mammalian cell-based cultures and producing recombinant proteins for a wide range of mammalian based biosimilars., • The candidate will be responsible in the purification of 50L to 2000L volumes engineering, clinical and commercial batches in a cGMP environment. This position requires technical expertise in AKTA purification skids or similar, TFF and knowledge of initiating batch records, protocols, investigations and other technical documents., • Work in a team environment to execute batches and can work independently with minimum supervision. This position requires extensive technical expertise in mammalian cell-based purification and TFF processes, cGMP manufacturing and compliance for BLA requirements. Essential Duties & Responsibilities: • Perform downstream process at multiple scales in a cGMP environment, column packing, process troubleshooting and data analysis., • Provides technical direction in the execution and development of the purification process., • Uses programs to collect and evaluate operating data to conduct on- line adjustments to products, instruments or equipment., • Ensure that engineering and clinical batches are executed in a timely manner., • Establishes operating equipment specifications and improves manufacturing techniques., • Works with other teams and outside vendors to resolve technical issues as well as maintenance of production equipment., • Should follow GMP instructions in the manufacturing area and take the lead to follow environmental health and safety policies., • Coordinate the conduction of investigations and corrections for issues found during the batch execution process., • Performs other functions as required or assigned, • Complies with all company policies and standards Education: • Requires a Bachelor or Master’ degree in chemical, biological or biochemical sciences and a minimum of 4- 5 years of related experience in the biopharmaceutical industry., • Previous experience working in GMP and aseptic manufacturing environment., • Experience working with AKTA Process skids or similar and familiarity of single use manufacturing consumables such as bags, tube sets, columns and process manifolds., • Possess knowledge to execute engineering and clinical batches; familiar with GMP documentation. Special Skills: • Ability to work with other team members and independently - good interpersonal skills., • Good communication skills: verbal and written, good computer and organization skills, detail oriented., • Basic computer skills, including knowledge of Word, Excel and spread sheet, • Knowledgeable in GMP batch manufacturing and packaging documentation; audit and review., • Knowledgeable in cleaning verification/validation. Work Environment & Physical Demands: • General work environment and physical demands as required to successfully perform the essential functions of this job., • Ability to work flexible hours as needed., • Ability to work under pressure and meet deadlines. Some travel may be involved.

Pay Rate: up to $49/hr on w2 (no C2C or 3rd parties) Location - Hybrid schedule in South Plainfield, NJ with 2 days onsite every week • Supports the operations and maintenance of the pole attached solar system and other aspects of our client's solar programs as needed., • The Pole Attached Solar System (PASS) consists of a new AWS hosting platform connected to over 3200 Network Communicators (Company) and 160,000 Smart Energy Modules (SEMs) that are distributed on utility pole throughout our client's electric service territory., • The Solar Technician would be responsible for testing, troubleshooting and managing field components (Company & SEMs) using a client test station located at the solar warehouse facility in South Plainfield. This would include ensuring the field units are tested in a timely manner and ensuring they are turned over to overhead field crews to support their field., • The job requires someone with good analytical skills to help our client achieve its yearly energy generation goals., • The job also requires general knowledge of Zigbee Mesh Network, Wi-Fi and cellular communication as well as a basic understanding of Linux., • We are looking for someone who can analyze the network using troubleshooting software dashboards so that we can maximize energy out of the system and strengthen the communication of the field devices to the AWS PASS backend hosting system. Work activities will include but are not limited to the following: • Test, troubleshoot, and repair solar panel components related to the pole attach system using test stations., • Monitor and track the performance of pole attach solar systems SEMs and NC's utilizing client's analytical tools., • Create work orders for overhead field crews, review and verify field work performed utilizing analytical tools., • Create reports to demonstrate the performance of the pole attach solar system for management review., • Perform field visits to troubleshoot SEMs/Company and visually audit solar panels located on utility poles throughout our client's electric service territory., • Utilizing operational platforms, MEGA, AWS PASS, Google Maps, Excel, create troubleshooting field tickets for electrical line crews and track performance of crews., • Oversee and track warehouse operations, activities, and equipment inventory maintained by a 3rd party., • Support transfer of technology of the pole attached solar system's operating and maintenance system, operating and maintaining test benches, and repair system hardware and equipment., • Interact with key partner vendors that support the pole attach solar system., • Ensure warehouse and pole attached solar safety measures are in place and being followed., • Maintain and repair test stations and workspace, and make sure consumable items are maintained in sufficient quantity for effective and efficient operations., • Investigate and resolve identified data gaps and anomalies with analytical tools working with support personnel., • Support verifying vendor invoices Required Qualifications: • Valid driver license., • Bachelor's degree or 5 years' experience working with solar equipment and knowledge of Zigbee mesh, Wi-Fi, and cellular communication technologies., • Experience repairing electrical components and utilizing test equipment / test stations., • General understanding of Linux, AWS, and Window Operating systems. Desired Qualifications: • Strong organizational, communication and writing skills, • Excellent client relations and business skills

Our client is a high-growth international B2B wholesaler and a disruptor in the traditional supply chain landscape. With two massive (300,000+ sq. ft.) distribution centers in Edison, NJ, they are scaling a data-driven fulfillment network that connects global manufacturing with top-tier retailers such as Walmart and Costco. They pride themselves on transparency, efficiency, and a collaborative culture that empowers professionals to design the future of wholesale logistics. Job Responsibilities Modular Ownership: Independently oversee and optimize specific workflow segments, including but not limited to Inbound/Receiving, Inventory Control, and Outbound/Shipping. Teamwork & Coordination: Work within a collaborative environment to ensure seamless handoffs between departments, maintaining a unified flow from container unloading to final mile delivery. Operational Excellence: Execute and refine Standard Operating Procedures (SOPs) for a high-volume, multi-channel SKU portfolio, ensuring extreme accuracy in high-pressure environments. System & Data Management: Utilize ERP/WMS systems to track real-time inventory, identify bottlenecks, and implement technical solutions to improve overall operational efficiency. Warehouse Optimization: During this critical scale-up phase, you will actively participate in designing warehouse layouts, slotting strategies, and automation troubleshooting to enhance overall site efficiency. Qualifications • 1-3 years of experience in large-scale distribution centers (3PL, E-commerce, or Manufacturing), with familiarity in handling high-frequency order flows., • Bachelor’s or Master’s degree in supply chain, Logistics, Industrial Engineering, or a related field preferred., • Proven ability to hit the ground running in a fast-paced, high-growth environment, with a track record of independently managing complex operational modules., • Strong command of WMS/ERP systems and data tools (Excel, SQL, or Power BI) to drive decision-making are preferred., • Exceptional communication skills with the ability to work effectively in a team-based model, supporting cross-functional goals beyond individual tasks., • Being bilingual (English/Mandarin) is required. Visa sponsorship is available for qualified candidates.

Company Overview: DIGI America is a leading provider of innovative solutions in the Retail Grocery and Food Industry. We are committed to delivering exceptional products and services that meet the evolving needs of our customers. As part of our strategic growth plan, we are seeking a dynamic and experienced Product Manager to join our team. Position Overview: As a Product Manager, you will play a key role in the go-to-market strategy, cross-functional collaboration, marketing, sales support, and product performance monitoring for the Innovation sector of our retail product line. You will work closely with cross-functional teams including Sales, Marketing, Service, and Operations to deliver high-quality products that meet customer needs and business goals. While this Product Manager position focuses on Innovation, ESL, AiO and our software tied to said products, via cross-training you will also be responsible for other DIGI products such as Wrappers and Scales. Key Responsibilities: • As a key member of the product team the Product Manager will provide market research and analysis, pre-sales analysis, design, and recommendations for customer implementation., • Support our Sales team by relaying knowledge of our products to create documentation and guides for our product listings., • Continued support of our Sales team by traveling to visit with prospects and customers, customer-facing with excellent communication skills in order to present functionality, benefits, and technical specifications of this product line., • Work with our parent company to test and maintain images, files, documentation and knowledgebase articles, in addition to providing feedback on food industry products., • Conduct thorough testing and debugging to ensure the quality and reliability of Innovation, Scale and Wrapper products software releases., • Present and train our sales team members and new employees via onboarding of each product, including testing of each team member., • Update and modify training material for all Innovation related products, including testing questionnaires and open-ended questions., • The Product Manager works to support connectivity between our customers’ business needs and to ensure our products meet these needs to deliver value., • Stay up to date on industry trends, technologies, and regulations related to Innovation related equipment., • Identify market opportunities and competitive landscape trends to influence product direction and maintain a competitive edge., • Work closely with Sales and Marketing teams to ensure product messaging, positioning, and customer experience are aligned., • Engage with customers to understand pain points, needs, and usage patterns through interviews, surveys, and data analysis. Use this information to relay features and improvements back to our parent company., • Support our Service team to deliver successful customer installations with troubleshooting on-site and remotely as needed., • Being the company product expert through speaking engagements and article creation. Basic Qualifications: • Flexibility to regularly rotate through different technical specialist and skill sets., • Ability to thrive on change as products evolve, • The ability to communicate with differing business units from executive level to end users., • Knowledge of PC and/or embedded based systems, • Knowledge of Networking, WiFi, and TCP/IP protocols, • Excellent verbal, written and presentation communications skills, • Travel as required to support sales team with addressable market and customer visits up to 40% Qualifications: • Bachelor’s degree in business, Product Management, Information technology, or other related field, • Excellent communication, written and interpersonal skills, • Creative, strategic, and analytical abilities with strong presentation skills, • Must be able to work in an environment requiring extensive telephone and computer work, • and be able to handle multiple issues simultaneously, • Extensive background in creating market and competitor analysis, • Drive to dig into how a system operates and desire to learn how to manipulate how hardware and software works. Problem solving aptitude, • Strong understanding of product development processes and lifecycle management., • Strong organizational skills with the ability to manage multiple projects simultaneously and prioritize effectively., • Proactive attitude towards learning new technologies and self-improvement., • Ability to work effectively in a fast-paced, dynamic environment and manage multiple priorities simultaneously. Benefits: • Competitive salary, • Comprehensive benefits package (including Health, Dental, Vision, Disability and Life, • Insurance), • Opportunities for career growth and advancement, • Dynamic and collaborative work environment DIGI is an equal opportunity employer and values diversity in the workplace.

We are At Synechron, we believe in the power of digital to transform businesses for the better. Our global consulting firm combines creativity and innovative technology to deliver industry-leading digital solutions. Synechron’s progressive technologies and optimization strategies span end-to-end Artificial Intelligence, Consulting, Digital, Cloud & DevOps, Data, and Software Engineering, servicing an array of noteworthy financial services and technology firms. Through research and development initiatives in our FinLabs we develop solutions for modernization, from Artificial Intelligence and Blockchain to Data Science models, Digital Underwriting, mobile-first applications and more. Over the last 20+ years, our company has been honored with multiple employer awards, recognizing our commitment to our talented teams. With top clients to boast about, Synechron has a global workforce of 14,500+, and has 58 offices in 21 countries within key global markets. Our Challenge: We are seeking for an Appian Developers who will be responsible for designing, developing, and maintaining business process management (BPM) applications using the Appian platform. They work closely with business analysts, stakeholders, and other developers to create efficient and scalable solutions that automate workflows, streamline processes, and improve organizational operations. Additional Information* The base salary for this position will vary based on geography and other factors. In accordance with law, the base salary for this role if filled within Piscataway, NJ is $110K - $120K/year & benefits (see below). Responsibilities: • Develop and customize Appian applications based on business requirements., • Design data models, interfaces, actions, and integrations within the Appian platform., • Collaborate with process owners and stakeholders to understand requirements and translate them into technical solutions., • Perform system testing, debugging, and troubleshooting to ensure robust performance., • Maintain and update existing applications to enhance functionality and performance., • Ensure adherence to best practices, security standards, and organizational guidelines., • Document application design, development processes, and user guides., • Provide technical support and expertise during the deployment and post-deployment phases. Requirements: • Proven experience in designing and developing applications on the Appian platform., • Strong understanding of BPM concepts, process modeling, and workflow automation., • Proficiency in Java, SQL, and other relevant programming languages., • Experience with RESTful APIs, web services, and third-party integrations., • Knowledge of SQL and database management systems., • Excellent problem-solving and analytical skills., • Strong communication and teamwork abilities., • Bachelor's degree in Computer Science, Information Technology, or a related field (or equivalent experience). Preferred Certifications, but not required: • Appian Certified Developer, • Appian Certified Designer We offer: • A highly competitive compensation and benefits package., • A multinational organization with 58 offices in 21 countries and the possibility to work abroad., • 10 days of paid annual leave (plus sick leave and national holidays)., • Maternity & paternity leave plans., • A comprehensive insurance plan including medical, dental, vision, life insurance, and long-/short-term disability (plans vary by region)., • Retirement savings plans., • A higher education certification policy., • Commuter benefits (varies by region)., • Extensive training opportunities, focused on skills, substantive knowledge, and personal development., • On-demand Udemy for Business for all Synechron employees with free access to more than 5000 curated courses., • Coaching opportunities with experienced colleagues from our Financial Innovation Labs (FinLabs) and Center of Excellences (CoE) groups., • Cutting edge projects at the world’s leading tier-one banks, financial institutions and insurance firms., • A flat and approachable organization., • A truly diverse, fun-loving, and global work culture. S YNECHRON’S DIVERSITY & INCLUSION STATEMENT: Diversity & Inclusion are fundamental to our culture, and Synechron is proud to be an equal opportunity workplace and is an affirmative action employer. Our Diversity, Equity, and Inclusion (DEI) initiative ‘Same Difference’ is committed to fostering an inclusive culture – promoting equality, diversity and an environment that is respectful to all. We strongly believe that a diverse workforce helps build stronger, successful businesses as a global company. We encourage applicants from across diverse backgrounds, race, ethnicities, religion, age, marital status, gender, sexual orientations, or disabilities to apply. We empower our global workforce by offering flexible workplace arrangements, mentoring, internal mobility, learning and development programs, and more. All employment decisions at Synechron are based on business needs, job requirements and individual qualifications, without regard to the applicant’s gender, gender identity, sexual orientation, race, ethnicity, disabled or veteran status, or any other characteristic protected by law.

Job Title: DevOps Automation Developer role Company: Quanta Systems Technologies LLP Employment Type: Full Time Location: New Brunswick, New Jersey, United States Experience: 10+ Years Work Timings: US EST Shift Timings Job Description: DevOps Development role involves providing configuration management, automation, and compliance solutions for hybrid multi-cloud and on-premises environments. Core Responsibilities • Chef & Ruby Development: Design, develop, and maintain Chef cookbooks, custom resources, and Ruby libraries for both application and platform workloads., • Compliance Automation: Create and maintain InSpec profiles and policy-driven automation to ensure security and compliance standards are met., • CI/CD Pipeline Integration: Integrate automated cookbook testing and promotion into Jenkins pipelines., • Infrastructure & Platform Support: Support Linux and Windows SCM client health and develop related remediation automation., • Testing & Quality Assurance: Perform unit, BDD, and integration testing for all delivered cookbooks and participate in code reviews and troubleshooting., • Documentation & Training: Produce architecture diagrams, runbooks, deployment instructions, and user guides, and lead knowledge transfer sessions for operations teams. Technical Skills Required • Configuration Management: Expert-level Chef development (Cookbooks, Custom Resources)., • Programming/Scripting: Proficient in Ruby for infrastructure-as-code. API design and development, • Security & Compliance: InSpec profile development and security posture management., • Tools: Jenkins for CI/CD, JIRA for sprint management, and SCM (Software Configuration Management) tools for Windows and Linux., • Cloud/Hybrid Infrastructure: Experience with multi-cloud (AWS, Azure) and on-premises compute instances. Required qualifications • 6+ years engineering experience with 4+ years in DevOps/SRE/automation roles (senior level)., • Strong Linux administration (RHEL/CentOS/Ubuntu) and package management (rpm/yum, dpkg/apt)., • Hands-on experience with Ansible (preferred) or Chef/Puppet and with writing idempotent automation., • Proficient in Jenkins pipeline development (Jenkinsfile, shared libraries) and CI/CD concepts., • Experience with artifact stores (Artifactory/Nexus) and secure artifact retrieval practices., • Scripting: Python and Bash; familiarity with shell tooling and unit-testable scripts., • Experience with secrets management (HashiCorp Vault, cloud KMS) and secure credential usage in pipelines., • Good knowledge of networking, SSH, firewalls, and access controls; strong documentation skills., • Experience working in regulated/compliant environments is strongly preferred. Preferred • Direct experience integrating with internal enterprise repos or PMUL/Cybersphere-like platforms., • Familiarity with signing artifacts (GPG), checksum verification, and binary provenance., • Terraform or cloud IaC experience; container orchestration (Docker/Kubernetes) a plus., • Experience with ServiceNow/ITSM integration and change-control workflows. Company’s Website: ___ Company’s LinkedIn Profile: ___ 📩 DM me or share your resume at [.] ___ #DevOps #Automation #Chef #Ruby #CICD #Python #Bash

We are looking to hire an Inventory Associate that will be responsible for receiving, inspecting, testing, documenting, and preparing hardware devices for nationwide deployment. This role requires strong attention to detail, basic technical troubleshooting skills, and the ability to work in a fast-paced, process-driven environment. Part time- 30 hrs for the week Shift: 8am to 5pm (Must be flexible within this time) Key Responsibilities • Receive and inspect incoming hardware shipments, • Verify quantities and device condition against packing lists, • Perform initial power-on tests to ensure devices boot properly, • Apply asset tags and maintain accurate inventory records, • Serial numbers, • MAC addresses, • Device status, • Connect devices to the internet to enable remote access and configuration, • Coordinate with a remote technical team to support firmware upgrades, • Conduct basic validation and functionality testing after upgrades, • Repackage devices with required accessories and documentation, • Prepare site-specific kits for deployment, • Basic understanding of computer hardware and networking concepts, • Experience with inventory handling, asset tracking, or IT staging preferred, • Ability to follow detailed procedures and documentation requirements, • Strong attention to detail and organizational skills, • Comfortable working with multiple devices simultaneously, • Ability to lift and move hardware packages as needed Preferred Qualifications • Previous experience in IT deployment, hardware staging, or logistics, • Familiarity with firmware upgrades or device configuration, • Experience working on large-scale or contract-based technology projects What We Offer • Opportunity to support a high-impact, nationwide technology deployment, • Hands-on experience with enterprise hardware, • Collaborative team environment, • Competitive compensation based on experience Equal Opportunity Employer: We provide equal employment opportunities to all qualified applicants and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.

Job Description COME WORK FOR US FOODS®! Ready to build a career with a company that’s leading the foodservice industry? We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Schedule: Sunday - Thursday Nights, 11:00 PM - 7:30 AM, OT available Pay range is $33- $38 hourly based on certifications and experience. Excellent Benefits starting DAY ONE! Including: * $250 Quarterly tool allowance, that's $1,000 extra per year! * New Boots Provided Yearly! * Low-cost Medical, Dental, and Vision for Family Coverage. * Paid vacation time, sick, and personal time. * Employee uniforms provided. * Employee referral bonus program * 401K with FANTASTIC company match! * Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! BASIC PURPOSE: To provide a safe and reliable fleet by performing preventative maintenance and proper repairs on all fleet equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES * Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). * Perform preventative maintenance within DOT standards. * Receive road calls, assign third party vendor, and work with business partners on plan of action. * Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. * Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. * Backup to other maintenance shop personnel. * Willingness and capacity to assume increased responsibility and certificates. * Other duties as assigned by manager. QUALIFICATIONS * Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. * Diagnostic and troubleshooting competency relating to equipment repairs. * Successfully demonstrated independent analytical and problem-solving skills. * Prior experience in administering appropriate PM program. * Must furnish own personal hand tools. * Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). * High school diploma or equivalent required. * Must possess a valid driver's license. * Valid Class-A CDL license and DOT certification PREFERRED * Experience using fleet maintenance software PREFERRED * Welding ability PREFERRED WORK ENVIRONMENT * Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. * Must be willing to work in extreme temperatures and weather conditions. Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting Occasionally 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $30.00 – $38.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___.

Overview: We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-precision metal forming techniques. Key Responsibilities: · Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow. · Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges. · Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent. · Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production. · Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables. · Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability. · Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance. · Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs. · Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. · Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors. · Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD). · Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining. · Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges. · Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success. · Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production. · Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement.

About Us United Premium Foods is an equal opportunity employer who wishes to hire motivated individuals to join our team working in our food production and cold storage facility. We are a fast-growing manufacturer of superior quality food (protein-based) products and provider of cold storage services. We are dedicated to delivering exceptional food processing solutions that prioritize quality, safety and superior customer service. Our commitment to excellence is evident in our New Jersey based facility, which is USDA and FDA Level 2 certified, and in our rigorous processes designed to meet stringent safety and food safety regulations. About the Role We are seeking a dynamic and experienced Food Safety and Quality Manager with strong customer relationship and communication skills as well as extensive experience in leading and managing teams to establish high standards for food production facilities. The ideal candidate will implement robust quality control protocols, maintain a compliant food safety environment, and oversee sanitation protocols. This candidate must possess a strong understanding of FDA and USDA regulations, as well as experience in quality system management. In this role, you will provide leadership to the food safety and quality team, guiding them to uphold best practices and achieve excellence. The candidate will develop, implement, and maintain food safety and quality SOPs and lead training initiatives for teams in established practices. The Food Safety and Quality Manager will manage team accountability for audit readiness, handle customer inquiries, administer lab results, and drive process improvement programs related to food safety and quality. This leadership role requires proactive troubleshooting skills to resolve quality assurance challenges, implement timely corrective actions, and develop preventative measures that align with company standards. Responsibilities The Food Safety and Quality Manager is responsible for leading and overseeing all aspects of food safety and quality assurance within the production facility. This role works closely with the plant’s management team—including production, operations, and facilities maintenance—to enforce rigorous cleaning and sanitation schedules, develop a high-performance team, and uphold the highest standards of food safety and quality. Additionally, the manager leads coordination with third-party vendors, labs, USDA inspectors, and auditors to ensure full compliance with federal, state, local, and organizational regulations and policies. The role involves daily leadership and oversight of food quality processes, managing team inspections and assessments, implementing HACCP principles, maintaining thorough quality records, and addressing any potential hazards to ensure ongoing compliance and operational excellence. • Oversee and manage quality control systems: Implement and maintain a robust quality management system to monitor product quality at every stage of production., • Lead inspections and audits: Perform and delegate regular internal inspections and audits of the production process, equipment, and facilities to ensure compliance with safety and quality standards., • Develop and manage strong Customer Relations: Foster trust and credibility, as well as maintain strong rapport with customer QA teams., • Lead and manage corrective and preventive actions (CAPA): Identify potential hazards, address non-compliance issues, and implement corrective and preventive measures to resolve quality and safety concerns., • Collaborate with and lead cross-functional teams: Work closely with production, operations, and maintenance teams to integrate food safety and quality practices into day-to-day operations., • Establish, oversee, and lead sanitation and cleaning processes: Lead the execution of strict cleaning and sanitation schedules to ensure a hygienic production environment., • Train and mentor staff on food safety and quality standards: Develop and deliver training programs to ensure all employees understand and follow food safety and quality policies and procedures., • Oversee product testing and lab results: Manage lab testing of raw materials, in-process products, and finished goods to verify adherence to quality and safety standards., • Develop, implement, and lead food safety protocols: Establish and maintain food safety programs, including HACCP, to ensure compliance with regulations and industry standards., • Ensure audit readiness and team preparedness: Prepare and maintain all necessary documentation and records for third-party and regulatory audits., • Drive continuous improvement within the team: Lead initiatives to enhance food safety and quality processes, including monitoring trends and implementing industry best practices., • Maintain thorough SOP documentation and team adherence: Ensure that all records related to food safety and quality, such as inspection reports, ATP swabbing, audit results, and compliance documentation, are accurate and up to date. Qualifications • Bachelor’s degree in food science, microbiology, chemistry, or related field., • Minimum of 8+ years of experience in a leadership role within food safety, quality assurance, or quality control within a food production environment., • In-depth knowledge of food safety regulations and standards (HACCP, GMP, FDA, USDA, FSMA)., • HACCP certification required (Preventive Controls Qualified Individual or SQF practitioner is preferred)., • Proven leadership ability with a strong work ethic, capable of mentoring, guiding, and managing cross-functional teams in food safety and quality practices., • Bilingual in Spanish is a plus. Working Conditions • Food manufacturing environment and cold storage warehouse. Ability to commute/relocate: • Woodbridge, NJ 07095: Reliably commute or relocate before starting work (Required).

Senior Manufacturing Engineer – New Product Introduction Full Time/Direct Hire - (Onsite) Location: Somerset, NJ Salary range: DOE: $130,000 - $165,000 (DOE) + bonus Relocation assistance available for non-local candidates Visa sponsorship is available for candidates requiring visa transfer only. Our client develops advanced semiconductor capital equipment that powers the technologies shaping modern life—from smartphones and cloud computing to AI, AR/VR, and high‑performance communications. They're seeking a Senior Manufacturing Engineer to lead New Product Introduction (NPI) efforts and drive the seamless transition of complex, precision‑engineered systems from design into scalable, high‑quality production. Overview In this role, you’ll ensure manufacturability, mitigate early risks, and develop robust processes that support volume production. You’ll work cross‑functionally with design, test, and supply chain teams to optimize product readiness, improve manufacturing efficiency, and resolve technical challenges throughout the product lifecycle. Key Responsibilities Lead NPI activities from design through volume production, managing engineering changes, validating processes, and optimizing BOMs and assembly workflows. Collaborate with design, quality, supply chain, and production teams to ensure manufacturability, implement DFA/DFT best practices, and identify design risks early. Improve manufacturing processes and equipment, develop documentation for scalable builds, and support final test operations by troubleshooting mechanical, electrical, and controls issues with permanent corrective actions. Analyze and resolve technical problems using structured methods (Fishbone, 8D, SPC) and support new product launches at contract manufacturer sites. Qualifications • Bachelor’s in Manufacturing, Mechanical, or Industrial Engineering with 8+ years of experience, or Master’s with 6+ years, • Experience with process improvement methodologies, • Proven success transitioning products from design to manufacturing and volume production, • Background in complex equipment/product manufacturing, • Masters degree or MBA is highly preferred Skills & Abilities • Strong NPI leadership from concept through full‑scale production, • Experience with VisMockUp, Technomatix, Cameo/CATIA, Creo (plus), • SolidWorks, Tol Analyst, Design Check, interference analysis, • SAP experience (plus), • Understanding of system I/O, hardware/software/controls compatibility, • Schematic and wire harness design knowledge, • Vacuum (UHV) and cleanroom experience (highly desirable), • DFx, DFMEA, PFMEA expertise, • Ability to interpret complex technical documentation, • Semiconductor background (plus), • Lean Six Sigma certification (plus), • Willingness to travel up to 10%

Responsibilities This role focuses on developing and optimizing SQL-based data solutions, building SSRS reports, and creating Power BI dashboards to support enterprise analytics. It involves ensuring data accuracy, performance, and scalability across large healthcare datasets while applying data warehousing best practices and maintaining consistent KPI logic. The position also requires working with healthcare data standards (HL7, FHIR, EDI), troubleshooting data and reporting issues, and performing root-cause analysis. Success in the role depends on strong collaboration with technical, product, and clinical stakeholders, clear communication, and the ability to independently deliver high-quality, end-to-end data solutions. Requirements This role requires strong SQL expertise, experience with SSRS and Power BI, and a solid foundation in data warehousing and Azure-based data environments. Candidates should be skilled in analyzing and validating data, translating ambiguous requirements into structured solutions, and working with healthcare or clinical data models. Success in the role depends on clear communication, attention to detail, and the ability to independently own work from requirements through delivery while collaborating effectively with cross-functional teams.

Back 12d Electrical Industrial Maintenance Technician III, 1st Shift #SP-849 South Plainfield, New Jersey, United States Apply X Facebook LinkedIn Email Copy We are looking for a motivated and skilled Electrical Industrial Maintenance Technician with strong electrical experience to join our team in South Plainfield, NJ JOB SUMMARY: The Maintenance Technician III supports production operations by performing preventative electrical/mechanical maintenance, troubleshoots and repairs production equipment, and performs repairs and maintenance of facility. Completes preventive maintenance and general maintenance in proper working order while abiding by all specified rules and regulations. ESSENTIAL FUNCTIONS: • Performing troubleshooting and repair on electrical/electronic, hydraulic, pneumatic mechanical systems., • Analyzing, troubleshooting, and repairing equipment. Assist with the service and repairing of more complex equipment., • Ability to repair all electrical wiring, electronic and electrical equipment (24 to 480 Volts), • Complying with applicable regulations according to OSHA and the department's Safety program., • Troubleshoot, maintain, and repair PLC programs., • Provide scheduled and emergency repairs to production equipment during production shift., • Install and maintain production/facility equipment., • Maintain a clean and organized work area., • Adhere to safety protocols., • Perform other duties as assigned by supervisor. Our salary ranges are determined by role, level, and location. The range displayed on the job posting reflects the minimum and maximum target for new hire salaries for this position. The range may vary by location. Within the range, individual pay is determined by additional factors, including job related skills, experience, and relevant education or training.In addition to base salary, this role will be eligible for participation in Canam Steel Corp (CSC)'s benefits programs, including medical, dental, vision, (plus additional voluntary benefits) and 401K (with employer match). REQUIREMENTS: • High school diploma or equivalent. Technical school preferred., • At least 3 years of mechanical and electrical maintenance experience., • Able to read electrical schematics, and mechanical Drawings, • Able to perform electrical troubleshooting and have a knowledge of electrical controls., • Must have the ability to troubleshoot mechanical, hydraulics, electrical panels and electric motors., • Must have basic knowledge of lock out / tag out and PPE., • Experience in operating, troubleshooting and repairing various types of production machinery in a manufacturing environment., • Licensed electrician, preferred. PHYSICAL DEMANDS: • Frequent communication with others to exchange information., • Standing for most of the shift, walking, use hands and fingers to handle or feel objects, tools, or controls., • Reach with hands and arms; stoop, kneel, crouch, or crawl., • Frequent repetition of motions that may include the wrists, hands and/or fingers., • Frequent moving about to accomplish tasks or moving from one worksite to another., • Frequent lifting or moving objects up to 50 pounds in all directions., • Constantly thinking and processing information., • Constantly maintaining concentration and focus on tasks. WORK ENVIRONMENT: • Manufacturing floor with machinery., • Exposure to airborne particles, loud noises, and extreme heat and cold., • Use of personal protection equipment is required. DISCLAIMER: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. CSC retains the right to change or assign other duties to this position. 7am-3:30pm OT as needed

Overview Are you mechanically inclined and excited aboutestablishinga growth-oriented career? Join Konica Minolta as aField Service Techniciantodemonstrateyour mechanical aptitude and grow your skills in our wide breadth of technologically advanced products and services. We have opportunities for career growth in all areas of the company! Join us now and receive a$1,500sign-on bonus! At Konica Minolta, we partner with our clients to design the Future of Work by managing and enhancing their printing equipment capabilities,optimizingcloud data security and functionality, offering managed print,ITand automation services, and so much more!This isa great opportunityto learnnew technologieswhile growing your career with an industry leader. Responsibilities WhatYou'llDo: * Perform maintenance and repairs on Konica Minolta products to include technical diagnostics, break/fix, installation, hardware removal and troubleshoot connectivity * Responsible to use andmaintaina variety of tools and gauges to repair and diagnose production machinery * Ability to drive to customer sites within assigned territory, track inventorysupplyand keep customers informed on scheduling. * Develop professional customer relationships andmaintaina high levelof customer satisfaction * Demonstrate progress in technical abilities, troubleshooting techniques and productivity * Log service visits and document updates for eachclientaccount. * Collaborate with the Account Management team to help resolve customer issues. What We Offer: * Hands on and computer-based training on current and upcoming technology products & services * Exposure to IT networks and services with career growth opportunities * Competitive car allowance program and paid mileage * Company providedlaptopandphone * An inclusive and flexible workplace environment that highly valuessharing ofnew perspectives. * Comprehensive benefits package includingpaid holidays, vacation, medical/dental, 401k, employeeassistanceand tuition reimbursement programs. Qualifications Minimum Qualifications: * 0-2 years of experience with servicing/repairing office equipment or machinery * High School Diploma/GED or equivalent experience * Reliable transportation to drive to customer sites daily * A+ or N+ Certification and exposure to IT Networks a plus About Us Konica Minolta Business Solutions' (Konica Minolta)journey started more than 150 years ago, with a vision to see and do things differently. The company partners with clients to Give Shape to Ideas by supporting their digital transformation through its expansive___portfolio. Its business technology offerings include IT Services, intelligent information management, video security solutions and managed print services, as well as office technology and industrial and commercial print solutions. 2025 marks Konica Minolta's 20thanniversary in production print, for which it celebrates "20 Years of Excellence, Innovation and Impact," and continues to lead the way in digital commercial printing. This year also commemorates 20 years of Konica Minolta's bizhub brand. Over the past two decades, the bizhub series has revolutionized office technology and redefined how businesses operate. It has continuously evolved to meet the needs of modern workplaces, fueled by advances in technology and a commitment to innovation. Konica Minolta is proud to be___, included on CRN's MSP 500 list numerous times; recognized as the___by Brand Keys for eighteen consecutive years and presented with Keypoint Intelligence's BLI 2025 and 2021 A3 Line of The Year and BLI 2021-2023 Most Color Consistent A3 Brand Awards for its___. For more information, please visit Konica Minolta___and follow it on___,___,. Konica Minolta operates on a North American Shared Services model, which aligns cross-border priorities and enhances delivery to its field organization. This combines service functions in the U.S. and Canada, ultimately providing more resources to support areas such assales administration, logistics and supply chain, marketing, product planning, finance, IT, HR and legal. Au sujet de Konica Minolta Solutions d'affaires Konica Minolta (Konica Minolta) a entame son parcours il y a plus de 150 ans, avec la volonte de voir et de faire les choses autrement. Elle fait equipe avec ses clients pour donner forme a leurs idees en appuyant leur transformation numerique grace a un riche portefeuille de solutions pour un milieu de travail connecte et fute. Parmi ses technologies d'affaires, on retrouve des services de TI, la gestion intelligente de l'information, des solutions de securite video et des services d'impression geres ainsi que des technologies de bureau et des solutions d'impression industrielle et commerciale. L'annee 2025 marque le 20e anniversaire de l'entree de Konica Minolta dans le marche de l'impression de production; l'entreprise souligne 20 annees d'excellence, d'innovation et de resultats tout en continuant d'etre une figure de proue dans l'impression numerique commerciale. C'est aussi l'annee ou la marque bizhub de Konica Minolta celebre ses 20 ans, au cours desquels la gamme a revolutionne la technologie de bureau, redefini les processus des entreprises, et evolue continuellement pour repondre aux besoins des milieux de travail modernes, mue par les avancees technologiques et la volonte d'innover. Konica Minolta est fiere de faire partie du palmares 2025 des meilleurs grands employeurs d'Amerique de Forbes, d'avoir figure a plusieurs reprises au palmares CRN des 500 fournisseurs de services geres, d'avoir ete nommee la marque numero un en matiere de fidelite des clients sur le marche des appareils de bureau multifonctions par Brand Keys pendant 18 annees consecutives, et de s'etre vue decerner les prix BLI A3 Line of the Year 2021 et 2025 et Most Colour Consistent A3 Brand 2021-2023 de Keypoint Intelligence pour sa gamme bizhub One i-Series. Pour en savoir plus, rendez-vous sur le site de Konica Minolta et suivez l'entreprise sur Facebook, YouTube, LinkedIn et Twitter. Konica Minolta fonctionne selon un modele de services partages nord-americain qui permet d'harmoniser les priorites transfrontalieres et d'ameliorer la prestation de services aux organisations operationnelles. Le modele combine des fonctions de service americaine et canadienne afin d'offrir davantage de ressources aux services de soutien comme l'administration des ventes, la logistique et la chaine d'approvisionnement, le marketing, la planification des produits, la finance, les TI, les RH et les services juridiques. EOE Statement Konica Minolta is an equal opportunity and affirmative action employer. We consider all qualified applicants for employment without regard to race, color, religion, creed, national origin, sex, pregnancy, age, sexual orientation, transgender status, gender identity, disability, alienage or citizenship status, marital status or partnership status, genetic information, veteran status or any other characteristic protected under applicable law. Konica Minolta Business Solutions (Canada) Ltd. is an equal opportunity employer. Solutions d'affaires Konica Minolta (Canada) Ltee. est un employeur d'opportunite egale.

Job Description A qualified technician typically earns between $75K - $200K. Pay is hourly, plus commission. As an experienced HVAC technician, you will perform maintenance, service, part replacements, & give estimates for repairs. Ability to evaluate customer’s homes for opportunities and inform clients about best options to meet their needs is required. Key attributes for this position include troubleshooting, being a team player, honesty, integrity and doing a great job for our customers. Work Hours: Mon- Fri 8am start time. End time & work hours will vary based upon scheduling needs and seasonal demand including some after hours and weekends. Pay Scale: Ranges between $75K and $200K depending on experience and performance, plus benefits. When you become part of the Bill Leary AC & Heating team, we offer: • Great Benefits - Medical / Dental / Vision Coverage, • Competitive Salary, • Commission – no caps on earning, • Earning Incentives, • Excellent Training Programs, • PTO, • Simple IRA, • Company vehicle, cell phone and iPad for on duty activities, • HVAC experience, • 5+ years sales experience, • Goal orientated with a strong desire to succeed, • Strong sales skills, • Strong interpersonal & communication, listening skills, • Professional appearance, • Ability to use iPad and smart phone, • Valid driver's license, • Insurable by company insurance carrier, • Mandatory drug testing and background check prior to hire.Company DescriptionBill Leary Air Conditioning & Heating is a family owned and operated business. The year 2025 marks our 36th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County. We provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance. Bill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. We keep up-to-date with the most current codes, laws, and utility rebate procedures. Our firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include: Universities Public Schools Municipal Buildings Police Stations And many other large and small commercial jobsBill Leary Air Conditioning & Heating is a family owned and operated business. The year 2025 marks our 36th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County.\r\n\r\nWe provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance.\r\n\r\nBill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. \r\n\r\nWe keep up-to-date with the most current codes, laws, and utility rebate procedures.\r\n\r\nOur firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include:\r\n\r\nUniversities\r\nPublic Schools\r\nMunicipal Buildings\r\nPolice Stations\r\nAnd many other large and small commercial jobs

Job Description Job description Who we are: Being one of the fastest growing HVAC companies in NJ, Sam's Air Control is proud to be delivering exceptional heating and air conditioning solutions to property owners across Central Jersey and neighboring areas. Founded in 2014 as a family-operated business, Sam's Air Control embodies a legacy of quality, integrity, and personalized service. With a commitment to excellence and a strong emphasis on familial values, we take pride in our team-oriented approach and strive to exceed customer expectations with every project. We are a fast growing company and depend on the strength of our team members' bonds to succeed, each and every team member is important and valued in our organization. Job summary: We are searching for a knowledgeable and professional residential service technician. The ideal candidate will have hands-on experience with the installation, maintenance, and repair of heating, ventilation, and air conditioning systems. This position is responsible for diagnosing issues, performing necessary repairs, and ensuring optimal system performance to deliver exceptional service to our clients. This will involve both commercial and residential calls, we are a 50/50 split between the two sectors. Qualifications: • HVAC Service experience 3+ years, • In-depth knowledge of HVAC systems and components., • Strong troubleshooting and problem-solving skills., • Excellent communication and customer service skills., • Relevant certifications and licenses as required by local regulations., • Ability to advance and grow along with the company, • Full-time, year-round work schedule, • Small family business - no "big business" atmosphere Job Type: Full-time Benefits: • 401(k), • Company truck, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • 8 hour shift, • Monday to Friday, • Overtime, • Bonus opportunities, • Commission pay, • Overtime pay Company DescriptionBeing one of the fastest growing HVAC companies in NJ, Sam's Air Control is proud to be delivering exceptional heating and air conditioning solutions to property owners across Central Jersey and neighboring areas. Founded in 2014 as a family-operated business, Sam's Air Control embodies a legacy of quality, integrity, and personalized service. With a commitment to excellence and a strong emphasis on familial values, we take pride in our team-oriented approach and strive to exceed customer expectations with every project. We are a fast growing company and depend on the strength of our team members' bonds to succeed, each and every team member is important and valued in our organization.Being one of the fastest growing HVAC companies in NJ, Sam's Air Control is proud to be delivering exceptional heating and air conditioning solutions to property owners across Central Jersey and neighboring areas. Founded in 2014 as a family-operated business, Sam's Air Control embodies a legacy of quality, integrity, and personalized service. With a commitment to excellence and a strong emphasis on familial values, we take pride in our team-oriented approach and strive to exceed customer expectations with every project. We are a fast growing company and depend on the strength of our team members' bonds to succeed, each and every team member is important and valued in our organization.

Job Description HVAC Technician – Job Description & Responsibilities We are seeking a reliable and skilled HVAC Technician to install, service, and maintain heating, ventilation, and air conditioning systems for residential and light commercial customers. The ideal candidate is mechanically inclined, customer-focused, and able to work independently as well as part of a team. Responsibilities • Install, troubleshoot, repair, and maintain HVAC systems including furnaces, hydronic boilers, air conditioners, heat pumps, and ductless mini-splits, • Perform preventative maintenance and system inspections, • Diagnose mechanical and electrical issues and recommend proper solutions, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Test HVAC systems for proper operation, airflow, and efficiency, • Communicate clearly with customers regarding system issues, repairs, and maintenance options, • Maintain accurate service records and work orders, • Follow all safety procedures and local building codes, • Maintain tools, equipment, and company vehicle in good condition, • 5+ years HVAC experience preferred (or equivalent training/apprenticeship), • Valid driver’s license and clean driving record, • Strong electrical and mechanical troubleshooting skills, • Ability to lift up to 50 lbs and work in confined spaces, • Ductless/VRF experience, • Competitive pay based on experience, • Overtime opportunities, • Paid training and continuing education, • Company vehicle, tools, and uniforms, • Paid time off and holidays Company DescriptionWe are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.We are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.

Job Description Job Summary: We are seeking a skilled and dependable HVAC Service Technician to maintain, diagnose and repair residential and/or commercial heating, ventilation, and air conditioning systems. The ideal candidate has strong troubleshooting skills, customer service experience, and a commitment to quality workmanship. Key Responsibilities: * Diagnose and repair HVAC systems, including air conditioners, furnaces, heat pumps, and ventilation systems * Perform routine maintenance on residential and commercial HVAC equipment * Install new HVAC systems and retrofit existing systems when needed * Test and calibrate HVAC systems for proper functionality * Interpret wiring diagrams and technical manuals * Communicate effectively with customers to explain repairs, options, and system care * Complete work orders, service reports, and maintain accurate records * Comply with all local HVAC codes, safety regulations, and company policies * Maintain tools and inventory in service vehicle * Participate in on-call rotation and respond to after-hours service requests Qualifications: * High school diploma or GED required * HVAC certification or diploma from technical school (EPA 608 certification required) * 2+ years of field experience preferred * Valid driver’s license with clean driving record * Strong diagnostic and mechanical skills * Familiarity with HVAC tools, gauges, and diagnostic equipment * Good communication and customer service skills * Ability to work independently and as part of a team Physical Requirements: * Ability to lift up to 50 lbs and work in confined spaces, attics, crawlspaces, or rooftops * Comfortable working in varying weather conditions * Standing, bending, kneeling, and climbing ladders for extended periods Benefits: (if applicable) * Competitive pay + overtime * Paid time off and holidays * Commission * 401(k) plan * Ongoing training and certification support * Company vehicle and uniform provided

Job Title: Field Service Technician II Location: Woodbridge, NJ 07095 Duration: 3 months (Contract to hire) Shift: M-F 9AM-6PM FLEXIBLE WITH OVERTIME AND AFTERHOURS * Will there be OC (on call)? YES * Will there be shift differentials? NO Description: • Provide exceptional customer service while supporting restaurant operators and staff., • Install, maintain, analyze, troubleshoot, and repair POS systems, hardware, peripherals, and related equipment., • Resolve technical issues efficiently and clearly communicate solutions to customers., • Document work performed, maintain system configurations, and execute hardware/software upgrades or replacements., • Perform light contractor work such as drilling, mounting hardware, and running cabling as needed to complete installations or repairs., • Train restaurant employees for proper use of supported systems and equipment., • Diagnose and repair product failures; order and replace parts as needed., • Recommend appropriate products, services, or solutions based on customer needs., • Apply working knowledge of kitchen operations and backend workflows to ensure seamless technology integration., • Follow established procedures and guidelines while working with minimal to no supervision., • Strong customer service and communication skills, with the ability to remain calm under pressure., • Experience troubleshooting and repairing POS or computer hardware systems preferred., • Basic understanding of networking concepts and restaurant technology environments., • Ability to perform light physical/contractor tasks (drilling, mounting, etc.)., • Willingness to work evenings and participate in an on-call rotation as needed., • Reliable transportation for travel between customer locations., • Completion of Client specific training and network cable termination training., • Must pass the Client certification exam to be eligible for field dispatch. Notes:, • Is this position remote or in person? REMOTE, • What will the primary day-to-day responsibilities entail for this person? See Description field above, • What are the TOP 2 required skills that candidates must have? 1. PEOPLE SKILLS 2. ATTENTION TO DETAIL, • How many overall years of experience should this person have? 2-4, • Do they need any specific certifications or education? See Description field above, • If contract to hire what is the conversion rate? $24.00, • How many miles per day will the contractor be driving? 0-100, • What radius range should candidates be located from the job location? 15-25 miles (New Jersey residents only)

Taskrabbit is seeking skilled, reliable individuals to join our global network of independent service providers, who we call Taskers. Whether you have professional experience in TV mounting or a hobbyist in home electronics, joining our platform allows you to flexibly run your own business by setting your own rates and accepting TV mounting tasks that match your level of experience. As a Tasker, you have the freedom to choose where and when you work so you can build a career that fits your lifestyle. The Taskrabbit Platform offers you an opportunity to grow your skills and develop a network of loyal clients. Please Note: This is not an employment opportunity. Taskers are independent service providers who are not employed by Taskrabbit. Responsibilities As a Tasker, you have the freedom to accept a variety of TV mounting tasks, which may include: • Safely and securely mounting TVs to various wall types (drywall, brick, concrete, wood etc.), • Assessing mounting surface conditions and arriving prepared with the appropriate mounting hardware, • Connecting cables, organizing wires, hooking up the entertainment system, and properly aligning the screen, • Testing and troubleshooting functionality, • Bring your own basic toolkit (depending on what the client provides), • Have proficiency using the Taskrabbit app and clear communication with clients, • Flexibly schedule and location–you can work where and when you choose, • Set your own rates and increase earnings with tips, • Get paid out quickly (within 3-8 business days of submitting your invoice), • Scale your rates to your experience as you grow your skills, • Access consistent stream of local moving gigs To register as Tasker on the Taskrabbit Platform: • Must be 18 years or older, • Ability to safely lift and support the weight of a television, • Have the ability to transport yourself to and from jobs, • Previous TV mounting experience is a plus, but not required, • Must undergo a background check, • Agree to the Taskrabbit Global Terms of Service

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, Monday - Friday, job stability, and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic systems, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Electrical & Controls: Troubleshoot, repair, and maintain industrial electrical systems up to and including 480 VAC, including motors, VFDs, motor starters, relays, sensors, and control panels. Diagnose control circuit failures using schematics and electrical prints. Perform advanced troubleshooting on PLC-controlled equipment, including I/O diagnostics and basic logic review (no programming required) Verify proper operation of safety circuits, interlocks, E-stops, and guarding systems in accordance with OSHA and NFPA standards. Mechanical Systems: Perform advanced mechanical troubleshooting and repair on conveyors, gearboxes, bearings, shafts, couplings, pumps, dryers, presses, and other industrial production equipment. Conduct precision alignment, tensioning, and adjustment of mechanical components to manufacturer specifications. Fabricate or modify components as required to support repairs and equipment improvements. Steam & Boiler Systems: Troubleshoot and maintain steam distribution systems, including steam traps, valves, condensate return systems, heat exchangers, and piping. Support safe operation of boiler and thermal systems in compliance with applicable codes and permits. Identify steam-related inefficiencies and failures that impact production, safety, or energy usage. Plumbing, Hydraulics & Pneumatics: Diagnose and repair industrial plumbing systems, including water, wastewater, chemical dosing, and process piping. Troubleshoot and maintain hydraulic and pneumatic systems, including pumps, cylinders, valves, regulators, and compressors. Identify pressure, flow, or contamination issues affecting equipment performance. Welding & Fabrication: Perform MIG/TIG/Stick welding to support equipment repair and improvements. Maintenance Systems & Documentation • Execute preventive and corrective maintenance tasks using the CMMS, including accurate work order documentation., • Maintain equipment history, parts usage, and maintenance records to support data-driven decision-making., • In-depth knowledge of industrial maintenance practices, reliability principles, and preventive maintenance strategies., • Working knowledge of industrial equipment, boilers, wastewater systems, and industrial utilities. High School Diploma or GED 3 or more years mechanical maintenance experience in an industrial manufacturing environment. Demonstrated knowledge of mechanical equipment, troubleshooting & repair, and safe work practices. Experience working in production environment. Be able to read building and electrical schematics. Basic math skills along with excellent organizational and decision-making skills. Must be able to work independently and efficiently in an often fast-paced environment. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: Medical, Dental, and Vision Insurance 401k with Company Match Paid Time Off & Paid Holidays Company Paid Life Insurance Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer #IND1

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Flexible schedule, • Opportunity for advancement, • Paid time off, • Advanced Troubleshooting: Diagnose complex electrical and hydraulic issues, including two-wire systems and localized valve failures., • System Upgrades: Retrofit aging systems with smart controllers, high-efficiency nozzles, and flow-sensing technology., • Maintenance & Operations: Lead spring start-ups, mid-season efficiency audits, and winterization blowouts., • Client Management: Perform "System Efficiency Scores" (SES) and educate clients on how to reduce water waste while maintaining a lush landscape., • Expert Diagnostics: Proficiency with a multi-meter and wire tracers/toners to locate "lost" valves and electrical shorts., • Smart Technology Mastery: Deep experience with WiFi-enabled controllers (e.g., Hunter Hydrawise, Rain Bird LNK) and flow sensor integration., • Hydraulic Knowledge: Understanding of GPM (gallons per minute), PSI (pressure) requirements, and friction loss to ensure optimal head-to-head coverage., • Two-Wire Experience: Knowledge of decoders and troubleshooting communication issues in large-scale commercial loops., • Drip & Micro-Irrigation: Advanced skills in designing and repairing low-volume drip systems for garden beds., • Experience: 35+ years of professional irrigation experience (specifically in service/repair)., • Licensing: Valid New Jersey drivers license with a clean record (required). A NJ Irrigation License (CIC) or CIT certification is a major plus., • Premium Tools: We provide a fully equipped, late-model vehicle and top-tier diagnostic equipment., • Growth Path: We support and pay for industry certifications (CIT, CLIA, etc.).

Job DescriptionPackaging Maintenance Mechanic Role & ResponsibilitiesThe following responsibilities are included but not limited to: • Responsible for the continuous functioning of various types of manufacturing packaging line systems and equipment within the Packaging and Manufacturing departments., • Perform the setup of manufacturing and packaging equipment, routine maintenance, repair, minor electrical troubleshooting, and partner with the engineering team to install and commission new manufacturing and process equipment., • Troubleshoot and repair all packaging line systems and equipment including liquid filling, powder filling, tablet filling, and all secondary packaging equipment., • Perform system modifications of existing lines as needed., • Conduct root cause analysis, problem identification, reference technical documentation, assess material requirements, place requisitions, and perform actual repairs., • Maintain inventory for spare parts and manage replacement of parts., • Perform preventive maintenance to ensure all packaging equipment functions properly, and follow and execute preventative maintenance schedules., • Provide accurate and timely documentation in equipment logbooks, and communicate effectively with coworkers during shift handoffs., • Train team members on equipment issues to eliminate future occurrences., • Maintain a solid understanding of cGMP practices and concepts, SOPs, Lock Out Tag Out (LOTO), and OSHA regulations.Education & QualificationsEducation, • High school diploma required; two-year advanced level preferred.Job Qualifications, • Able to work independently and complete work orders in a professional and timely manner., • Excellent understanding of packaging activities and document-described situations.Experience & SkillsExperience, • Minimum 5 years of relevant experience required.Skills, • Ability to work independently — Intermediate level., • Strong verbal and written communication skills — Advanced level.Specialized Knowledge, • Microsoft Office Suite (Word, Excel, Outlook)., • Strong general maintenance knowledge.Job-Specific Requirements, • Ability to read, comprehend, and follow SOPs written in English., • General mechanical and electrical troubleshooting skills necessary to diagnose, disassemble, repair, and reassemble packaging equipment., • Knowledge of packaging equipment setup, adjustments, and packaging documentation is preferred., • Must be able to wear personal protective equipment (PPE)., • Maintain a clean and orderly work area during all operations within the facility., • Flexible to work extended hours and on weekends as required.Physical Requirements, • Ability to lift up to 50 lbs. #ZIPNE