Aerospace jobs in United Kingdom

Were looking for an experienced Lead Engineer with a strong background in aerospace or aviation to take ownership of back-to-birth (BTB) traceability for aircraft landing gear systems. In this role, youll ensure full compliance with airworthiness regulations by managing accurate, end-to-end documentation across the component lifecycle. Youll lead a small team, collaborate with global stakeholders,... ZIPC1_UKTJ

Service Engineer (HVAC / Bespoke Gas Products) £38,00-£45,000 (OTE £55,000-£65,000) + Overtime + Door-to-door pay + Company Van + Fuel Card + Flexible Hours + Training + Qualification Support + Progression + Company Benefits Croydon - with regional travel Are you a Service Engineer from an HVAC / Gas or similar background looking for a varied, fast-paced role working on specialist Gas Products for a range of blue-chip clients across a regional patch within a leading company known for looking after and developing their staff who offer door-to-door pay and uncapped overtime to greatly increase your earnings? This industry-leading company are a manufacturer and distributor of spray booths for a broad range of clients across numerous industries including automotive, aerospace and rail. They have seen continual growth in the past 30 years and due to an ever increasing workload are looking to grow their friendly team. This varied role will see you working autonomously as you carry out a range of PPM in addition to some reactive breakdown work, upgrades and component installation on specialist spray booths. You will cover a regional patch (primarily within South London, Kent and Sussex), working a 40 hour week with any overtime and further travel paid at 1.5x. This exciting role would suit a Service Engineer from an HVAC / Gas background looking to join a leading company who offer specialist training, the chance to greatly increase your earnings and to continually progress to senior roles. The Role: • Carry out planned servicing and breakdown repair on spray booths, • Hands on role including some working at height, • Undertake a range of associated maintenance work, • Covering a regional patch around South London, Kent and Sussex, • Service Engineer or similar, • HVAC / Gas background Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Sheet Metal Worker (Fine Limit) Romford Full time, permanent Salary:£35,000 £42,000 per annum About the Client Our client is a long-established aerospace precision engineering organisation specialising in the manufacture of complex, tight-tolerance components for the aerospace, defence and high-technology sectors. Operating with advanced fabrication capabilities, multi-axis machining, and specialist f... ZIPC1_UKTJ

CNC Programmer (5 Axis) Romford Full time, permanent Salary:£35,000 £48,000 per annum(depending on 5-axis experience, programming capability, and aerospace background) About the Client Our client is a leading aerospace precision engineering organisation specialising in the manufacture of complex, tight-tolerance components for global aerospace and defence applications. Operating advanced multi-axis ma... ZIPC1_UKTJ

CNC Turner (Aerospace/ Defense/ 5-Axis) £15 - £19 Per Hour + In-House Training + Career Progression + Extensive Overtime + 25 Days Holiday + Bank Holiday Are you a CNC Turner or similar, looking for a role at an industry leading Precision Engineering company, who work in a variety of exciting industries including Aerospace and the Defense sector, offering great work-life balance, scalable career pr... ZIPC1_UKTJ

Senior Hardware Engineer - Remote - up to £80,000 + Benefits - REF 2019\n\nI am currently recruiting for a Senior Hardware Engineer to work for a cutting-edge engineering organisation on a fully remote basis. Salary up to £80,000 + Benefits.\n\nThe organisation has been in operation for over 10 years, has customers in close to 40 countries and has 4 sites strategically situated across the globe. They are deemed the specialists at what they do on an international basis with little valid competition and they've grown astronomically over recent years now employing over 200 engineers.\n\nTo support the shear amount of projects they have ongoing and in line with their continued expansion plans they have the need to appoint another Senior Hardware Engineer on a permanent basis.\n\nIn this role as a Senior Hardware Engineer, you will be responsible for Hardware designs from requirements to release in a safety critical environment. This will include PCB Design and Schematic capture using Altium (typically 6-14 layers), FPGA, RF (Radio Frequency) and Power Electronics up to 5KW. You will be working in a Hardware Team consisting of around 15 engineers.\n\nEssential Requirements:\n\nAt least 3 years' experience as an Electronics Design Engineer or similar\nPCB Design and Schematic capture (Altium)\nPower Electronics\nRF (Radio Frequency)\nFPGADesirable Requirements:\n\nExperience within the Aerospace sectorThis is a fantastic opportunity for a Senior Hardware Engineer to work for a market leader, whilst developing your skills alongside some of the best engineers within the industry. They fully support career development and progression, evidenced by many candidates who joined years ago that are now performing significantly more senior roles than what they were initially hired to perform.\n\nThis is an immediate requirement, so if you have the required skills and experience then please get in touch immediately with an updated copy of your CV

Senior Estimating Sales Engineer / Production Engineer required for this respected Subcontract Precision Engineering company working acroos Oil & Gas & Aerospace sectors. What's in it for you * Work for a long-established, world-leading precision engineering business * High-complexity work across oil & gas and aerospace customers and standards * Senior, influential role spanning estimating, customer interf... ZIPC1_UKTJ

CNC Miller (Precision Engineering)£38,000 - £42,000 + Overtime + 22 Days Holiday + Monday to Friday + Days Only + Pay Progression + Enhanced Pension + Training + On-Site ParkingDartfordAre you a CNC Miller looking to join a company that has excellent modern facilities, overtime and facilitates a great work-life balance?This company has been trading for over three decades and enjoys consistent stability and steady growth, now owning three 10,000-square-foot factories. As an Investor in People, they have built a dedicated team from new apprentices to time-served individuals, all working together in modern facilities to produce high-quality components.This role will see the successful candidate operate a range of 3 and 5-axis CNC machines to produce precise components for the Aerospace industry. Previous experience within a similar working environment is essential, and the ability to programme or previous experience with Heidenhain controls is advantageous.If you are a CNC Miller looking to join a company that offers an excellent benefits package, training opportunities and overtime, apply today.The Role: • Interpret and understand engineering drawings with a good understanding of geometric dimensions and tolerances to carry out machining of precision components, • Utilise a variety of measuring equipment to ensure the quality and accuracy of all machined components, • Use manual cutting tools when necessary to ensure sheet metal fulfils the required dimensions, • Proven experience with a similar role

Job Title: Human Factors Integration Manager (Edgewing) Location: Reading area. The role could be contracted to any BAE Systems site (preferably Frimley) but on commencement will immediately be assigned to our Edgewing JV in the Reading area. A financial support package may be available to enable this assignment if required, dependent on certain criteria being met. Due to the nature of this assignment, we envisage there will be a need for mostly on site working, however, flexible working arrangements may be possible – please speak to your recruiter about the options for this role. We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: £70,000+ (DOE) Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there’s no limit to where a career at BAE Systems could take you. Role Description: This role focuses on managing and supporting the Human Factors (HF) Integration Management System across all key product areas, including the Edgewing core platform, cockpit integration, and TLS HF. It involves working closely with Human Factors product leads, such as the Cockpit Integration Lead and TLS Training HFI Lead, to make sure HF is smoothly integrated and aligned with program goals. The role also includes leading and mentoring the team, helping team members grow while driving high standards and consistency in HF integration across multiple products and initiatives.. Core duties: • You’ll tailor and develop HF approaches to meet project priorities, balancing time, cost, and available resources effectively, • You’ll lead Human Factors (HF) integration across the full lifecycle, from concept through to in-service support managing a team of human factors engineers, • Perform analysis of Human Factor integration of design artifacts, • You’ll give technical governance and assurance of Human Factor activities across GCAP including Edgewing partner companies and suppliers, • You’ll draw on your experience to be able to apply this in the defence and/or aviation sectors to ensure best practices and compliance (highly regulated industries), • You’ll hold at least a bachelor’s degree, or demonstrate equivalent knowledge, in a relevant human science or Human Factors discipline By joining Edgewing, you will have a unique opportunity to help shape the company from the ground up — setting the foundations for generations to come, influencing how we work, and helping us build something world-class together. At Edgewing, we’re united by a shared purpose to drive what’s next in defence – uniting UK, Italian, and Japanese expertise to shape the future of global defence. With trust at the heart of everything we do, we empower our people to dare to go beyond, bring their best as one, and leave a mark that matters on a truly global mission, making a lasting impact through work that truly matters. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a good sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 13th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI-JE1 #LI-Hybrid

Job Title: Principal Systems Engineer Location: Frimley, Hybrid, 3 days on site weekly We offer a range of hybrid and flexible working arrangements – please speak to your recruiter about the options for this particular role Salary: Competitive Who we are: Join BAE Systems and you’ll be part of something bigger. As a valued member of our global colleague network, you’ll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You’ll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow – shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space – there’s no limit to where a career at BAE Systems could take you. What you’ll be doing: In this role, you will provide technical ownership of CCS design, supporting the Engineering Manager in delivering in-service programmes and leading key design decisions. You will oversee project scope, manage design changes and work closely with stakeholders and suppliers to identify and address risks early. You will lead programme-level design reviews, coordinate stakeholders and manage design baselines while ensuring design governance is maintained and Certificates of Design are produced where required. You will also review and influence technical requirements and architecture to support effective system integration across sub-systems and specialist areas, while providing subject matter expertise in the integration, validation and verification of systems. Core duties: • You’ll have extensive experience in network or software engineering, ideally with a background in operations, • You’ll have the ability to take the lead on technical matters and provide expert guidance, • You’ll have Chartered Engineer status or be working towards it, • You’ll have familiarity with DOORS and prior hands-on experience using it You will be joining the In-Service Programme team, working on the V Class, where you’ll thrive in a fast-paced environment, delivering high-quality results within tight enterprise timelines. As part of a medium-sized core team of 6-12, you’ll also collaborate with a wider group of around 30, engaging with a broad stakeholder network. This role demands technical leadership, owning challenges, proactively solving problems, and working with the right stakeholders to drive solutions forward. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you’ll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work – this is a place where you can grow your career with confidence and be empowered to be your best. You’ll be recognised for your contribution and enjoy rewards tailored to what’s most important to you and your family – support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive. We’re committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 31st May 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. #LI- KI1 #LI-Hybrid

Shorterm Group is currently working with a leading aerospace component MRO centre based in Hayes, seeking a motivated and enthusiastic engineer eager to develop their skills in electroplating.What is Electroplating?Electroplating is a surface treatment process used to restore, protect, or enhance components. At its core, electroplating uses an electrical current to deposit a thin layer of metal (like chromium, nickel, or cadmium) onto a component. It's a mix of hands-on engineering, chemistry, and precision workmanship, and it plays a crucial role in keeping aircraft components safe and airworthy.This role is ideal for someone with some experience in an engineering environment and a strong willingness to learn a specialised trade. You'll benefit from a fully supported training programme, working alongside experienced electroplaters who will guide your development, in a huge aerospace company. Location: HayesShift: 4 days on, 4 days offSalary: From £29,833 (including shift allowance)If you're looking to start or grow your career in engineering (particularly within the aerospace sector) this is an excellent opportunity to gain valuable skills, with clear prospects for progression and further training.Candidates must have Full right to work in the UK. Candidates must be willing to work shifts that cover weekends. Apply now or contact Callum Withey at Shorterm Group for more information.

Manufacturing Engineer8 month contract – Outside IR35Immediate startSunbury on Thames Our client are a leading manufacturer providing specialist solutions to a variety of industries such as aerospace, power generation, rail and oil and gas industries. They are looking for an experienced Manufacturing Engineer to join the team.Manufacturing Engineer Working across operations, supply chain and design engineering to provide manufacturing engineering expertise in supporting existing and new products, defining new and supporting existing processes. You will assist in the implementation of strategic Lean initiatives throughout the Company, leading some Continuous Improvement projects.Main Duties/Responsibilities • Work with manufacturing cell leaders, lean co-ordinator and design engineering to improve process efficiencies, • Implement ‘Standard work’, generating & maintaining manufacturing documentation (SOP’s, Routings, “Visual Factory” displays), • Creation & Maintenance of Routings in the MRP system, • Implement lean manufacturing methods (e.g. 1-piece flow lines, visual factory) to reduce throughput times, rework/scrap and work in progress, • Implement basic improvement tools, from 5S, 7 Wastes, Visual Management and Standardised Work balanced assembly lines where single (best) piece flow philosophies are employed, • Implement any required layout changes, ensuring both the facilities and maintenance teams are fully involved, • Support the Manufacturing Cells with their recording, and analysis of production data, and ensure the correct focus is placed on the main issues arising, • Initiate and / or lead improvement projects and CAPEX to enable new process and product introductions., • Work with Engineering on product documentation modifications and parts obsolescence, • Provide day-to-day manufacturing engineering support for the production cells to enable customer schedule adherence (Fracas/concessions, change notes or MRB (material review board), • Lead and work in teams to develop process FMEA, in their construction and implementation., • Manage new product introductions and the manufacture of legacy products from release to production through the product life cycle., • Mentor for cell leaders for improved methods of manufacturing assembly and test.Manufacturing EngineerEssential Skills/Experience/Qualifications;, • 5+ years experience within a manufacturing/engineering environment, ideally for the aerospace industry, • Previous experience of NPI, • Experience of implementing Standard Work processes, • Proven record of successfully implementing Lean in an industrial environment (either as a co-ordinator or as a leader), • A proven track record of generating and maintaining process maps, PFMEA’s and control plans, • Strong knowledge of lean manufacturing principles, • Experience of using problem solving techniques (5 Why’s, Fishbone/Ishikawa diagrams, 8D), • Significant technical & problem solving experience in an electro-mech. manufacturing environment., • Good time management with a significant track record of planning / managing complex long term projects.

Quality Control Engineer £36'000- £45'000 + Variety Of Work + Technical Training + Flexi Time + Competitive Pension + Stability + Family Feel Environment + 'Immediate Start' An excellent opportunity for a Quality Control Engineer with CMM experience to join a close-knit and highly skilled team where your impact will be genuinely valued. This company operates within the medical sector, supplying specialist products across Europe. Due to continued growth, they are looking for a Quality Control Engineer who enjoys hands-on quality work and wants to contribute to meaningful, high-precision projects. As part of a small team, you will play a key role in maintaining and improving quality standards, with the autonomy to shape processes and influence the department's direction. As A Quality Control Engineer You Will Be: • Site Based - Monday - Friday 37.5 Hour Week* Working with ZEISS CMM Equipment* Inspecting products The Successful Quality Control Engineer Will Have: • Experience using CMM technology (ZEISS - Desirable)* Inspection and Testing Experience* Commutable to Beckenham If interested, please apply or contact Charlie Auburn on for immediate consideration Keywords: ZEISS, CMM,Quality Control Engineer, Inspection Beckenham, Kent, Bromley, London, South London, South East London,Quality Aerospace, Engineering, Actuators,Healthcare, Metrology, This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.

CNC Miller – Setter / Operator (4 & 5 Axis) Precision Engineering | Romford If you’re a skilled CNC Miller who enjoys complex work and getting jobs right first time, this is an opportunity to join a well-equipped machine shop producing high-spec components for demanding industries. Working as part of a close-knit machining team, you’ll be trusted with setting and running advanced multi-axis machines, playing a key role in delivering precision-engineered parts to exacting standards. The Role This is a hands-on position where you’ll take ownership of your work — from setup through to final part quality — within a fast-paced but quality-driven environment. Key Responsibilities • Set and operate CNC milling machines, including multi-axis equipment, • Manufacture precision components in line with engineering drawings and customer specifications, • Work with 4 and 5-axis machining, including multi-datum setups and complex offsets, • Ensure all parts meet required quality and tolerance standards, • Carry out first-off inspection and in-process checks, • Identify and resolve machining issues, making adjustments as needed, • Maintain machine performance and troubleshoot faults where they arise, • 5-axis machining centres, • Horizontal machining centres, • Vertical machining centres (VMCs), • Fanuc-controlled systemsWhat We’re Looking For, • Strong experience as a CNC Miller (setter/operator) in a precision environment, • Proven ability to set machines efficiently and accurately first time, • Experience working with multi-axis machining (4 & 5 axis), • Confident interpreting technical engineering drawings, • Solid understanding of machining principles, tooling, and offsets, • Proactive approach to problem solving and maintaining quality standardsDesirable Experience, • Background in aerospace or other highly regulated industries, • Familiarity with a range of machining platforms and controls To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

CNC Programmer / Setter / Operator (Fast Make – Milling or Turning) Precision Engineering | Romford This is a role for a machinist who enjoys the full lifecycle of manufacturing — not just running parts, but owning the process from concept through to production. Working within a fast-paced “fast make” environment, you’ll be responsible for developing and proving out new components, programming multi-axis machines, and ensuring parts are delivered right first time. The Role You’ll act as a key link between engineering and production, taking ownership of how new components are manufactured and brought into production efficiently and accurately. Key Responsibilities • Develop robust manufacturing methods for new and complex components, • Generate CNC programmes for 3, 4, and 5-axis machines using CAD/CAM software, • Define tooling requirements and create setup sheets and machining strategies, • Prove out programmes on the shop floor and support transition into production, • Take ownership of all supporting process elements including:, • Tooling and work holding, • Gauging and inspection methods, • CNC programme control and configuration, • Ensure projects are delivered within cost targets and timescales, • Troubleshoot machining and process issues, implementing effective solutions, • Work closely with production, quality, and engineering teams to optimise performanceWhat We’re Looking For, • Strong background in precision machining (milling or turning) within a manufacturing environment, • Proven experience in offline CNC programming using CAD/CAM systems (GibbsCAM preferred), • Ability to interpret complex engineering drawings and specifications, • Solid understanding of cutting tools, feeds/speeds, and machining strategies, • Experience with multi-axis machining (3, 4 & 5 axis), • Confident problem solver with the ability to identify root causes and implement fixesDesirable Experience, • Previous work within aerospace or highly regulated industries, • Familiarity with SOLIDWORKS or similar CAD software, • Engineering qualification (Apprenticeship, ONC/HNC/HND or equivalent) To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

CMM Inspector/ Program£36,000 - £43,000 + benefits Location -ChessingtonAre you a Quality Inspector with experience in operating CMM Machines, looking for an immediately available, days based contract role for a market leading engineering company that that design & manufacture a range of high-quality products for specialist industries.On offer is a chance for a Quality Inspector with experience in operating CMM machines that is looking for an immediately available, days based contract with the view to turn into a permanent role for a market leading engineering company that is at the forefront of their industry.On offer is a permanent position within a well-established precision engineering business supplying high-quality components into industries including aerospace, automotive, oil and gas, nuclear, and general engineering.This role would suit a Quality Inspector that is looking for role role where you will be working within a highly skilled quality department and a market leading engineering company.The Role: • Quality Inspector, • Operating CMM Machines, • Quality Inspection background Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Senior Programme & Bid Manager Competitive Salary + Bonus + Progression + Leadership Role + Excellent Company Benefits Enfield, North London (Commutable from: Enfield, Barnet, Tottenham, Walthamstow, Cheshunt, Harlow, Watford, Stevenage, North London) Are you a Programme Manager, Bid Manager or Senior Project Leader looking to step into a high-impact leadership role within an innovative engineering and technology business, where you can shape major projects, lead high-value bids and influence business growth? On offer is an excellent opportunity to join a well-established market-leading organisation, taking ownership of a portfolio of complex programmes and bids while leading a high-performing team across project delivery, commercial strategy and customer engagement. This company are a highly respected business delivering advanced engineering technology solutions to customers worldwide. They are known for innovation, long-term stability and investing in their people, making this a fantastic opportunity to join during an exciting period of growth. In this senior role, you will lead Programme Managers and Bid Managers, oversee live projects and new opportunities, manage governance, cost, risk and resource planning, and ensure successful delivery from bid stage through to completion. You will also work closely with senior leadership, customers and key stakeholders. This role would suit an experienced Programme Manager, Bid Manager, Head of Projects or Senior Project Manager from engineering, defence, aerospace, marine or complex manufacturing environments looking to take the next step in their career at a leading international business. The Role: • Lead a portfolio of complex programmes and bids, • Manage and develop Programme Managers / Bid teams, • Oversee governance, cost, risk, scheduling and delivery performance, • Present reports and updates to senior leadership, • Proven leadership experience in programme / bid / project management, • Background in engineering, defence, manufacturing or similar sectors Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Night Shift Quality Control Inspector Precision Manufacturing | Monday–Thursday | 17:00 – 03:15 If you’re someone who takes real pride in precision and enjoys being the final checkpoint between production and perfection, this night shift QC role offers the autonomy and responsibility to make a genuine impact. Working at the heart of the inspection function, you’ll be trusted to ensure that every component leaving the facility meets exacting standards — from first-off approval through to final verification. The Role – What You’ll Own This isn’t just ticking boxes — you’ll be a key part of safeguarding product integrity across the full manufacturing lifecycle. • Carry out detailed inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications, • Take responsibility for first-off inspection to keep production running efficiently and right-first-time, • Produce and compile First Article Inspection Reports (FAIRs) with full traceability, • Ensure all inspection records are accurate, complete, and audit-ready, • Support goods inward inspection and verify incoming components, • Identify, log, and escalate non-conformances in line with company procedures, • Work closely with production and quality engineering to resolve issues and prevent recurrence, • Contribute to root cause analysis and continuous improvement activity, • Strong experience in precision inspection within a manufacturing environment, • Confident using a range of inspection tools, gauges, and measuring equipment, including CMM, • Ability to read and interpret complex engineering drawings (metric & imperial), • Experience producing or supporting FAIR documentation, • Knowledge of quality standards and inspection processes, • Comfortable working independently on a night shiftDesirable (but not essential), • Aerospace or highly regulated industry experience, • Exposure to ERP/MRP systems (Javelin advantageous) To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy

Assembly Technician / Production Engineer We are recruiting for a hands-on Assembly Technician / Production Operative to join a growing engineering and manufacturing team. This is an excellent opportunity for individuals with practical mechanical or production experience who enjoy working in a structured, quality-focused environment. The role involves assembling technical equipment and components using digital work instructions, hand tools and power tools, while working closely with team leaders and engineering teams to ensure high build standards. This position would suit candidates from production, assembly, mechanical, automotive, engineering or manufacturing backgrounds, as well as practical engineering graduates looking to build hands-on experience. You will be based near Epsom for this contract and it has been assessed as OUTSIDE IR35. Key Responsibilities • Assemble products and components in line with digital work instructions and quality standards, • Prepare and organise parts and materials for production builds, • Use hand tools and power tools safely and correctly, including torque tools where required, • Route and secure wiring and mechanical assemblies neatly and accurately, • Identify and report any build or assembly issues to supervisors or engineers, • Follow health & safety procedures and maintain a clean working environment, • Support continuous improvement initiatives across production processes, • Work independently on assigned tasks while contributing positively to the wider teamSkills & Experience, • Previous experience within a production, assembly, mechanical or manufacturing environment, • Confident using a variety of hand tools and power tools, • Ability to follow written or digital assembly instructions accurately, • Good attention to detail and a quality-focused approach, • Strong practical and problem-solving skills, • Comfortable working in a structured, process-driven environment, • Experience within automotive, aerospace, commercial vehicle, prototype or technical assembly environments, • Electrical or wiring assembly experience, • Experience working in research & development or low-volume production settings, • Forklift licence This is a great opportunity to join a supportive and growing technical environment with opportunities to further develop practical engineering and production skills.

Estimating Sales Engineer (Aerospace) £50,000 - £60,000 + benefits Location -Chessington, Surrey Are you an experienced Estimating Engineer, Sales Engineer, or Production Engineer from a precision engineering or aerospace background, looking to join a long-established and highly respected engineering business with a world-leading reputation in deep hole drilling and precision machining services? On offer is an excellent opportunity to join a successful and growing precision engineering company supplying high-specification components into industries including aerospace, oil & gas, defence, and advanced engineering sectors. This role sits at the heart of the business, combining commercial estimating, customer liaison, and production engineering support. You will be responsible for producing accurate and competitive quotations, supporting customer relationships, and ensuring projects are delivered efficiently from enquiry through to manufacture. This role would suit an experienced Estimating Engineer, Sales Engineer, or Production Engineer looking to build a long-term career in a market-leading company. The Role: * Prepare accurate quotations from RFQs, drawings, and technical specifications * Liaise with customers, suppliers, and subcontractors regarding pricing and requirements * Support pricing strategy to maintain competitiveness and margins * Review manufacturability and advise on machining methods, tooling, and processes * Work closely with production, planning, and quality teams for project handover * Participate in customer meetings, technical reviews, and contract negotiations * Permanent days-based role with early finish on Fridays The Person: * Experience in estimating, sales engineering, or production engineering roles (Training Provided) * Able to read engineering drawings * Exposure to aerospace and/or oil & gas sectors preferred Reference Number: BBBH273072 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Christopher Palmer White at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Design Quality Engineer (Contract) – 12 MonthsRate: £55–£70 per hour (DOE)Location: Hybrid (Biggin Hill when on-site)Start Date: ASAPWorking Pattern: 3–4 days per week (flexible) Contact: Emily or Sammy at PWR A leading, high-performance engineering environment is seeking an experienced Design Quality Engineer to join on a 12-month contract. This role will support design quality and product data integrity across advanced engineering and product development teams. Working closely with senior quality leadership and engineering functions, you will play a key role in ensuring that all product data, engineering documentation, and design changes are controlled, accurate, and compliant throughout the lifecycle. Key Responsibilities • Manage and maintain product data integrity within the PLM system, • Oversee engineering change management processes, ensuring accurate documentation and release, • Control and validate engineering drawings, CAD data, and technical documentation, • Administer product structures, BOMs, and part number governance, • Progress engineering data through lifecycle stages in line with defined processes, • Ensure version control, revision management, and document traceability, • Act as a central point for data governance across engineering, manufacturing, and quality teams, • Support engineers and designers in adhering to PLM and data control processes, • Collaborate with internal teams and external providers to optimise PLM system performance Key Requirements • Experience in an engineering environment (e.g. automotive, motorsport, aerospace, defence, medical), • Strong expertise in engineering change management and product lifecycle management (PLM), • Experience in engineering drawing approval and output quality control, • Proven background in BOM management and product data structures, • Hands-on experience with PLM systems (Windchill preferred), including setup and administration, • CAD experience, • Strong attention to detail with a focus on data accuracy and compliance, • Ability to work effectively in a fast-paced, collaborative engineering environment This is an excellent opportunity to contribute to a cutting-edge engineering programme, with flexibility on working pattern and a competitive hourly rate.

Manufacturing Engineer / CNC Programmer Advanced Precision Engineering | Romford This is a role for an engineer who wants more than just programming — it’s about shaping how products are manufactured from the ground up. Joining a highly capable engineering team, you’ll be instrumental in developing machining strategies, introducing new components into production, and driving improvements across manufacturing processes. The Role You’ll operate at the intersection of engineering and production, taking ownership of CNC programming, process development, and tooling design to ensure components are delivered efficiently, accurately, and right first time. Key Responsibilities • Create and optimise CNC programmes for 3, 4, and 5-axis machining, • Develop manufacturing processes and methods for new and existing products, • Design and implement work holding solutions, jigs, and fixtures, • Define and manage all supporting production elements, including:, • Tooling and cutting strategies, • Gauging and inspection methods, • Production routings and process documentation, • Ensure projects are delivered within cost, quality, and time constraints, • Support and enhance process control documentation and standardisation, • Work closely with production teams to ensure smooth introduction of new components, • Contribute to continuous improvement initiatives to increase efficiency and reduce waste, • Keep up to date with emerging manufacturing technologies and identify opportunities for adoptionWhat We’re Looking For, • Strong background in precision manufacturing / CNC machining environments, • Proven experience in offline CNC programming (multi-axis machining essential), • Ability to develop robust, repeatable manufacturing processes, • Experience designing tooling, fixtures, and work holding solutions, • Confident interpreting complex engineering drawings and specifications, • Strong understanding of machining principles, materials, and toolingDesirable Experience, • Background in aerospace or other highly regulated industries, • Experience working within a medium to large manufacturing environment, • Engineering qualification (Apprenticeship, ONC/HNC/HND or equivalent) To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

Fine Limit Sheet Metal Fabricator Precision Engineering We’re looking for an experienced Sheet Metal Fabricator who takes pride in high-precision work and enjoys working on complex, tight-tolerance components. This is a hands-on role within a specialist fabrication environment, producing detailed parts for highly regulated industries. You’ll be working with a wide range of materials — including more challenging alloys — where quality and accuracy are critical. The Opportunity You’ll play a key role in transforming flat sheet into finished components, often working from detailed drawings but also applying your own judgement and craftsmanship where required. Core Responsibilities • Manufacture precision sheet metal components to tight tolerances using a range of fabrication techniques, • Carry out bending, forming, cutting, and assembly operations across a variety of materials, • Interpret engineering drawings, sketches, and shop floor instructions to produce accurate parts, • Set up and operate fabrication machinery such as press brakes, fly presses, and finishing equipment, • Perform hand forming and development work on prototype or low-volume components, • Complete finishing processes including deburring, trimming, drilling, filing, and grinding, • Inspect components throughout the process to ensure compliance with specification, • Maintain tools, jigs, and equipment in good working order and ready for useWhat We’re Looking For, • Strong background in fine limit sheet metal work within a precision manufacturing setting, • Proven ability to work to tight tolerances across complex components, • Confident reading and interpreting technical engineering drawings, • Experience working with a variety of materials including aluminium and stainless steel, • Ability to work independently and maintain high standards under minimal supervisionHighly Desirable, • Previous experience within aerospace, defence, or other highly regulated industries, • Familiarity with exotic materials such as titanium and nickel-based alloys (e.g. Inconel), • Skilled in manual forming techniques for bespoke or prototype work, • Experience assembling fabricated parts alongside machined componentsWhy Consider This Role, • Work on complex, high-specification components rather than repetitive production, • Opportunity to utilise and develop advanced fabrication skills To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

Night Shift | Permanent | Competitive Salary Are you detail-driven and passionate about quality assurance in manufacturing?Join a precision engineering team where your inspection skills will help maintain the highest standards in product verification and compliance. The Role As a Quality Control Inspector working night shifts, you’ll be responsible for: • Verifying parts, assemblies, and sub-assemblies against engineering drawings and customer specifications, • Completing inspection records with full traceability, • Supporting production with batch verification and FAIRs (First Article Inspection Reports), • Identifying and escalating non-conformances, • Ability to interpret technical drawings and specifications, • Experience inspecting precision components and using inspection gauges, • Familiarity with CMM operation and sheet metal/fabricated parts, • HND or equivalent qualification, • Strong communication, organisational, and problem-solving skills, • Knowledge of ERP/MRP systems (e.g., Javelin), • Awareness of MSA, NDT, SPC, ISO/ASME standards, • Be part of a skilled and supportive team, • Work on high-spec products in a quality-focused environment

NDT Level 2 Technician Location: Romford Salary: DOE We are working with a well-established engineering organisation seeking a skilled NDT Level 2 Technician to support their quality assurance operations. This position plays a key role in verifying the integrity of high-spec components using non-destructive testing techniques, with a strong emphasis on penetrant testing methods. Role Overview As part of the inspection team, you will be responsible for carrying out non-destructive testing activities to ensure all components meet strict quality standards. You will be involved in both routine inspections and continuous improvement efforts within a highly regulated environment. Key Duties • Conduct liquid penetrant inspections in line with technical drawings, process instructions, and industry standards, • Perform routine checks and calibration of NDT equipment to maintain compliance and reliability, • Accurately interpret engineering documentation and customer specifications, • Record inspection outcomes clearly, ensuring full traceability of all tested components, • Detect defects or irregularities and escalate findings with recommendations for corrective action, • Support the upkeep of the NDT facility in line with accreditation standards, including NADCAP requirements, • Handle and manage inspection materials safely, including correct storage and disposal procedures, • Monitor consumable levels and coordinate reordering where necessary, • Confirm product conformity at various stages of the inspection process, • Promote a culture of quality and efficiency, aiming to reduce rework through right-first-time practices, • Adhere to all relevant health & safety protocols, particularly in relation to hazardous substances, • Stay up to date with evolving aerospace standards and compliance requirements, • Assist with internal and external audits, contributing to ongoing process improvementsCandidate Profile, • Previous experience in non-destructive testing within an aerospace or similarly regulated environment, • Familiarity with working in accredited facilities (e.g. NADCAP), • Competence in using inspection and measurement tools with precision, • Ability to understand and interpret complex technical drawings and specifications, • Strong working knowledge of penetrant testing techniques and procedures, • Awareness of industry quality frameworks such as AS9100, • Certification to EN4179 Level 2 or equivalent (e.g. PCN Level 2 in Liquid Penetrant Testing), • Current and valid certification within scope, • Comfortable using digital systems for reporting and documentation, • Highly organised with a strong attention to detail To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy.

Junior Service Engineer (ACS / Gas Safe)£33,000-£40,000 (OTE £50,000-£55,000) + Overtime + Door-to-door pay + Company Van + Fuel Card + Flexible Hours + Training + Qualification Support + Progression + Company BenefitsCroydon - with regional travelAre you ACS / Gas Safe registered? On offer is a varied, fast-paced role where you will cover a regional patch within a leading company who offer specialist training to upskill yourself in Commercial Gas and both door-to-door pay and overtime to greatly increase your earnings.This industry-leading company are a manufacturer and distributor of spray booths for a broad range of clients across numerous industries including automotive, aerospace and rail. They have seen continual growth in the past 30 years and due to an ever increasing workload are looking to grow their friendly team.This varied role will see you initially shadowing senior engineers and then working autonomously as you carry out a range of PPM in addition to some reactive breakdown work on specialist spray booths. You will cover a regional patch (primarily within South London, Kent and Sussex), working a 40 hour week with any overtime and further travel paid at 1.5x.This exciting role would suit someone with ACS / Gas Safe registration looking to join a leading company who offer specialist training, the chance to greatly increase your earnings and to continually progress to senior roles.The Role: • Carry out planned servicing and breakdown repair on spray booths, • Hands on role including some working at height, • Covering a regional patch around South London, Kent and Sussex, • ACS / Gas Safe Registered, • Looking for a role with lots of travel / overtime Reference number: BBBH24980If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Manufacturing Engineer/CNC Programmer Romford Full time, permanent Salary:£38,000 £52,000 per annum 23 days hol +BH ABOUT THE CLIENT Our client is a leading precision engineering and aerospace manufacturing specialist supplying high-integrity machined components and assemblies. Operating under strict aerospace regulatory frameworks, the business delivers complex machined parts to major aerospace and de... ZIPC1_UKTJ

Supply Chain Manager Location: London, minimum 2 days onsite preferred Type: Permanent Sector: Defence / Aerospace / UAVOverview We are supporting a growing defence engineering business in the unmanned systems sector that is looking to strengthen its supply chain capability as part of a wider scale-up in product delivery and manufacturing readiness. They are seeking a Supply Chain Manager to manage supplier relationships, support sourcing strategy, and drive commercial engagement across a supplier base focused on components and metallic parts. This is a key role for someone who can combine supplier relationship management, commercial awareness, contracts understanding, and client-facing capability in a growing, delivery-driven business.Role Purpose The successful candidate will take ownership of supplier relationships and help build a more robust and scalable supply chain capable of supporting a growing engineering and manufacturing operation. The focus will be on ensuring suppliers can deliver the required quality, cost, and lead-time performance, while also supporting the business in commercial and contractual discussions.Key Responsibilities • Manage relationships with suppliers providing components, metallic parts, and other key manufacturing inputs, • Develop and maintain a supply chain capable of supporting growth in engineering and production activity, • Work with suppliers to improve delivery performance, responsiveness, quality, and cost, • Support commercial and contractual discussions with suppliers, • Contribute to sourcing strategy and supplier selection, • Act as a key interface between the business and external suppliers, • Work closely with engineering, manufacturing, and programme teams to ensure supplier capability aligns with delivery needs, • Identify supply chain risks and develop mitigation plans, • Help build a more structured supply chain model to support business growth and manufacturing scale-up, • Maintain strong client and stakeholder relationships where supply chain performance has a direct impact on programme deliveryWhat you will need, • Experience in supply chain, supplier management, procurement, or commercial roles within engineering, aerospace, defence, or manufacturing environments, • Strong experience managing supplier relationships for components and metallic parts, • Commercially aware, with understanding of contracts, supplier negotiations, and delivery risk, • Able to operate confidently with both suppliers and internal stakeholders, • Strong communication and relationship management skills, • Experience in a scaling or fast-paced engineering/manufacturing environment, • Good understanding of how supply chain performance affects programme delivery and client outcomesDesirable, • Aerospace, defence, UAV, or advanced manufacturing background, • Experience in building or maturing a supply chain function, • Exposure to complex engineering products and lower-volume to scaling production environments, • Understanding of quality and compliance expectations in regulated sectorsSummary This is an exciting opportunity for someone who can help build and manage the supplier ecosystem needed to support a growing unmanned systems business, with a particular focus on components, metallic parts, commercial control, and supplier relationship management.

Senior Spacecraft Systems Engineer Location: London We’re working with a growing space engineering organisation delivering complex spacecraft missions across commercial and institutional programmes. They’re looking for a Senior Spacecraft Systems Engineer to lead mission definition, system architecture, and verification across the full spacecraft lifecycle from concept through to integration and validation. The Role • Define mission CONOPS and derive system requirements, • Lead mission analysis and spacecraft modelling, • Manage system budgets (mass, power, data, fuel), • Deliver mission-level V&V including FMECA, FTA, FDIR, • Support feasibility studies and bid activities, • Coordinate across subsystem teams (GNC, propulsion, comms, software), • Support integration and test activities What You’ll Need • Degree in Aerospace/Systems Engineering (or similar), • 5+ years’ space industry experience, • Strong background in system architecture and full project lifecycle, • Experience with spacecraft subsystems and mission-level V&V, • Understanding of AIT and end-of-life/debris considerations

Job Title: UAV Prototyping Engineer Summary: Revolutionise UAV technology from concept to production in our cutting-edge London lab. Location: Wandsworth, London - on site at least 4 days a week Working Hours: Full time, Monday to Thursday, 9:30 am - 6:00 pm, Friday 9:30 am - 5:00 pm (1-hour lunch break) About FAC Technology: FAC Technology is a leader in the development of advanced composite materials and lightweight structures. The company works on cutting-edge projects across industries, including aerospace, defence, automotive, and emerging technology sectors. The company has generated a portfolio of technologies including drones, resins and aerospace components, which it is now commercialising. UAV Systems Engineer Role The company is seeking technical individuals to join its UAV quadcopter design and production team and contribute to a hands-on, innovative workspace. The role encompasses all stages of product development: initial concept creation, prototype testing, supplier selection, design for manufacture, customer trials and production. You will have the opportunity to lead individual design and development projects, as well as working in a wider team. The role will require a willingness to travel to support field tests or customer demos & trade shows (about 5-15% of your time) with the remainder spent at our London-based prototype production facility. Requirements: • 3 - 5 years of experience with multi-rotor platforms, including Betaflight, Ardupilot and Pixhawk, • Thorough understanding of UAV systems including electronics, comms protocols, RF, structures, and propulsion, • PCB & Electronics design experience, • Practical hands-on experience of UAV manufacture, • CAD/CAM capability, Fusion360 or Solidworks, • Familiarity with engineering drawings, • 3D printing experience Desirable Traits: • Excitement to work with new technology, • Strong attention to detail and a commitment to quality, • FPV / Drone Pilot - A2 / GVC certification would be a plus, • Team player with good communication skills, • Willingness to learn and adapt to new tasks, • Problem-solving attitude and a proactive approach to engineering challenges, • A degree in Aeronautical/ Electronic/ Mechanical Engineering or other relevant field What We Offer: • Competitive reward package, • Participation in cycle to work scheme and gym membership, • 25 days annual leave, • Experience working in a dynamic technical environment with rapid development cycles, • Support for CPD including engineering Chartership, • Opportunity for UK or international travel to attend field tests and customer demonstrations How to Apply: If you wish to be considered for the role of UAV Prototyping Engineer, please send a CV and covering letter via LinkedIn. WE REGRET WE CAN ONLY ACCEPT APPLICATIONS FROM PERSONS AUTHORISED TO WORK WITHIN THE UK. DUE TO THE NATURE OF THE WORK ALL CANDIDATES WILL BE REQUIRED TO COMPLETE A BPSS SCREENING PRIOR TO EMPLOYMENT

Quality Manager – CNC Machining / Aerospace – £60,000 Location: Hertfordshire Full-Time, Permanent Salary: Circa £60,000 The Opportunity A well-established and growing subcontract precision engineering business (circa 35 employees) is seeking a Quality Manager to lead its quality function. The company supplies high-precision CNC machined components into highly regulated sectors, including aerospace and defence, and is looking for a hands-on leader to drive quality standards, improve systems, and embed a right-first-time culture across the shopfloor. You will take full ownership of Quality and lead a small team of: • Quality Engineer, • Goods In / Out Inspector, • Inspector The Role This is a key leadership position within the business, responsible for maintaining and developing the Quality Management System while acting as the escalation point for all quality-related matters. You will be highly visible across the operation, working closely with Production and Engineering to ensure processes are robust, repeatable, and aligned to customer and regulatory requirements. Key Responsibilities • Lead and continuously improve the Quality Management System in line with AS9100/ISO standards, • Manage internal, customer, and third-party audits, ensuring effective and timely close-out of actions, • Act as the escalation point for non-conformances, leading root cause analysis (8D, 5 Why, Fishbone) and corrective actions, • Oversee all inspection and verification activities, including FAIRs, production inspection, and CMM/metrology capability, • Implement and drive key quality metrics including scrap, rework, customer returns, and OTIF performance, • Manage supplier quality, ensuring compliance, traceability, and flow-down of requirements, • Maintain robust document control and quality record systems, • Work cross-functionally to ensure manufacturing processes are stable, measurable, and repeatable, • Drive continuous improvement and introduce more effective, data-driven and digital quality processes, • Promote a strong quality culture through leadership, coaching, and shopfloor engagement About You • Proven experience as a Quality Manager within CNC machining or precision engineering, • Strong knowledge of FAIR/FAI, traceability, non-conformance systems, and metrology, • Able to read and interpret engineering drawings and GD&T, • Experience working within AS9100 or similarly regulated environments, • Confident communicator, able to engage with shopfloor teams, customers, and auditors, • Hands-on, pragmatic approach with a focus on continuous improvement Desirable • Lead or Internal Auditor qualification (ISO9001 / AS9100), • Engineering qualification (HNC / HND / Degree), • Experience with Lean or Six Sigma, • Background in aerospace, defence, or other regulated industries Why Apply • Senior role with full ownership of the quality function, • Stable SME environment with strong industry positioning, • Opportunity to make a visible impact and drive improvements, • Close-knit team with real autonomy, • Early finish every Friday If you are a hands-on Quality Manager looking for a role where you can genuinely influence standards, systems, and culture, apply now.

Job Title: B1 Licensed Aircraft Engineer Salary: £79,735 per annum plus shift allowance (£7,725) plus sign on bonus Location: London City Airport We currently have a vacancy to join a British, regional airline as a B1 Licensed Aircraft Engineer, to be based out of London City airport. Established almost 20 years ago, they currently have a fleet of 20 aircraft and operate a network of domestic and European services serving both the business and leisure markets. They hold a UK CAA Type A Operating Licence. The B1 Licensed Aircraft Engineer- UK CAA Part 66 will join the close- knit line maintenance team where you will be delivering precision engineering on a modern Embraer fleet. You will work in a fast- paced environment shaped by short runways, steep approaches and high- frequency ops. You will gain broad exposure across scheduled and unscheduled maintenance and be part of an operation that values training, innovation and regulatory excellence. You will be responsible for the routine servicing and defect rectification of their Embraer E190 fleet, operating in one of the most unique and challenging airport environments in Europe. You’ll also play a key role in AOG recovery and help maintain a safe, compliant, and high-performance operation in a fast-paced setting where precision and teamwork are everything. You will be able to demonstrate sound knowledge of current CAA Part 145 procedures, be flexible in your approach to meet their operational challenges at London City Airport and across the network using some of the latest technology. They operate a 5-5-4 shift pattern with a 2 weekends off per month guaranteed (day and night shifts or solely night shift) Main Responsibilities: • Lead by example in setting and upholding standards of behaviour, performance, and technical excellence within the maintenance team., • Carry out scheduled/ unscheduled maintenance and defect rectification on Company aircraft as allocated by the Aircraft Maintenance Supervisor or Line Maintenance Manager, • Deputise for Aircraft Maintenance Supervisor., • Maintain the highest airworthiness, quality, safety and performance standards and ensure all company and legal requirements belonging to aircraft maintenance., • Exercise fully the privileges of the company authorisations held., • Support company charters and the recovery of AOG and casualty aircraft as required on network., • Work to the required Company and Health & Safety standards, • Carry out or arrange for the maintenance and/or repair of Company tooling, equipment and vehicles, • Complete and maintain compliance with all Company training requirements required to carry out the role Benefits Include: • Basic salary of £79,735 per annum, • Annual shift allowance of £7,725, • Sign on bonus of £3,000, • Overtime available at current rate x 2 for days and nights, • 26 days holiday plus bank holidays (34 total), • Pension plan- 4% employee contribution and 6% employer contribution with the option to increase employee contributions., • Life assurance- 4 x annual basic salary, • Company sick pay, • Referral bonus scheme, • A range of salary sacrifice schemes including electric vehicle scheme and cycle to work scheme, • Gym and retail discounts, • Staff travel benefits including unlimited basic and premium standby tickets on worldwide flights through our parent company. You will also receive up to 30 discounted airfares per year for yourself, family and friends About You: • CAA Part-66 Category B licence -Unrestricted B1, B2 or B1/B2, • A minimum of 1 type rating held (Embraer E190 Type rating desirable but not essential- training can be provided), • Experience with both scheduled and unscheduled line maintenance, • Valid full UK driving licence (or equivalent), • Ability to hold an airport restricted zone access, • Ability to hold an airside driving licence, • Strong communication skills, • Ability to demonstrate a flexible approach to duties, • Ability to work on own initiative and under minimal supervision, • A willingness to extend licence coverage and attend and pass aircraft type courses as required, • Ability to work to all approved Company documents, Procedures and Policies, • To take pride, ownership and responsibility for work completed, • A willingness to provide support to all individuals and teams within the company, • Ability to represent the Company in a professional and respectful manner About Aeropeople: Whether you’re looking for your next job or searching out the next superstar to join your team… Aeropeople’s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses. During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period. For the latest news, events and jobs please search ‘Aeropeople Ltd’ on LinkedIn and Facebook for our latest jobs

Location: South West London Salary: £75,000 - £90,000 Clearance: SC (or eligible) As Principal Mechanical Engineer you will play a key role within the engineering team of a defence company based in London. You will act as a technical expert and lead in the development of electro‑mechanical products that are production‑ready, robust and compliant with industry standards. This role is suitable for Principal Mechanical Engineers, Mechanicals Leads or Senior Mechanical Engineers looking to step up. You will work on complex mission critical projects, applying your expertise in mechanical design, materials, manufacturing and regulatory standards. Requirements: • Significant experience in the defence, maritime or aerospace sector., • Strong knowledge of defence mechanical design standards and regulations., • Ability to lead design from concept through manufacture., • Security Clearance: due to the nature the work, you MUST be a British Citizen without dual nationality.

🚀 Recruiter – London Who We Are ALTEN is a global leader in Engineering and IT Services, supporting our clients across Innovation, R&D, and Digital Transformation in over 30 countries. We partner with world-renowned organisations across Aerospace & Defence, Automotive, Energy, Rail, Life Sciences, and Technology sectors – helping them design and deliver the future. Join us and start building tomorrow’s world, today! 🌟 What You’ll Be Doing We’re looking for a Recruiter to join our growing London team. This is a fantastic opportunity to develop your recruitment career within a leading engineering consultancy that values Excellence, Accountability, Integrity, and Service. In this role, you’ll take ownership of end-to-end recruitment for a variety of engineering roles — helping us connect exceptional technical talent with major clients such as Airbus, Rolls-Royce, and Jaguar Land Rover. Your main responsibilities will include: 🔹 Talent Sourcing & Attraction • Partner with hiring managers to understand requirements and deliver effective sourcing strategies., • Use multiple channels — job boards, LinkedIn, social media, networking events, and referrals — to attract top-tier engineering talent. 🔹 Screening & Selection • Conduct phone and video interviews to assess candidates’ technical and cultural fit., • Build and maintain a proactive pipeline of qualified candidates for current and future projects. 🔹 Candidate Experience • Ensure every candidate enjoys a smooth, professional, and engaging recruitment process., • Communicate ALTEN’s culture and values clearly throughout their journey. 🔹 Data & Reporting • Track key recruitment metrics to improve performance and efficiency., • Share insights and recommendations to continuously enhance recruitment strategies. 💡 What We’re Looking For • 1+ years of recruitment experience, ideally within engineering, technology, or STEM sectors., • Strong communication, influencing, and relationship-building skills., • Excellent organisational and time-management abilities., • Familiarity with ATS systems and sourcing tools., • A proactive, collaborative mindset – you thrive in a fast-paced, results-driven environment. 🌍 Why ALTEN? At ALTEN, you’ll be part of a community of innovators, entrepreneurs, and technology specialists. We believe in continuous learning, mentorship, and professional growth — from ALTEN Labs and training academies to leadership development and global career opportunities. Join us to work in an open, supportive environment where ideas are valued, and success is shared. 🎁 What’s in It for You • Competitive salary + performance bonus, • Private medical & travel insurance, • Life Insurance, • Pension scheme, • Cycle-to-work scheme and other lifestyle benefits, • Regular social events, team-building activities, and a fun, inclusive culture, • A clear career path with opportunities to progress within a global organisation Ready to take the next step in your recruitment career? Join ALTEN and help us build the future of engineering talent.

Job Title: Principal Product Safety Engineer Salary: £70,000- £74,000 dependent upon experience Location: Portsmouth/ Frimley/ New Malden or Bristol We currently have a vacancy to join one of the world’s leading, global defence, security and aerospace companies as a Principal Product Safety Engineer. The role can be based in Broad Oak, Frimley, New Malden or Filton and offers a hybrid working pattern. This will be working a 37 hour week with a 1pm finish on Fridays. The company works at the cutting edge of technology, creating more than 100 new inventions every year for customers in over 100 countries. The Combat System is the heart of any platform and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with like-minded Product Safety Engineers, you will be critical in underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging the norm as well as bringing new ideas to the table across a varied and ever-changing portfolio of Combat System projects. Main Responsibilities: • Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within, • Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies, • Production of high-quality submissions including hazard logs, safety cases and safety plans, • Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required, • Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team Benefits: • Annual bonus, • Enhanced Pension scheme- up to 14% combined, • Flexible working pattern including working from home/ flexible start and finish times, • 25 holiday days plus bank holidays- 26 days after 5 years’ service/ 27 days after 10 years’ service, • Early finish on Fridays, • Shared Incentive Plan, • Employee Assistance Programme, • Cycle to Work Scheme, • Life Assurance (you and your spouse/ partner)- 6 x salary, • Ill Health Income Protection/ Private Medical Insurance- 50% of salary About You: • Knowledge of safety management processes and techniques, • Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues, • Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508, • Familiar with the principles of a Safety Management System, • Experienced in writing technical documentation to an elevated level, • Experience in Product Safety within Software Systems would be advantageous, • Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. You must be eligible to apply for SC clearance and, therefore, must hold a British passport and have lived and worked in the UK for the past 5 years About Aeropeople: Whether you’re looking for your next job or searching out the next superstar to join your team… Aeropeople’s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses. During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period. For the latest news, events and jobs please search ‘Aeropeople Ltd’ on LinkedIn and Facebook for our latest jobs

Mechanical Senior Principal Engineer Introduction Join a cutting-edge engineering environment where your expertise will help shape complex, real-world defence solutions. This is a senior-level opportunity to lead from the front—combining technical depth with leadership impact across high-profile programmes. Role Overview: • Location: New Malden, • Package: Competitive Salary + bonus + strong benefits, • Industry: Defence & Aerospace Engineering What You’ll Be Doing: • Leading the end-to-end design and delivery of mechanical and electro-mechanical systems, • Acting as the go-to technical authority across materials, manufacturing and mechanical design, • Overseeing complex engineering challenges, ensuring solutions are robust, compliant and production-ready, • Managing project planning, timelines and technical delivery against quality and cost expectations, • Reviewing and approving detailed engineering documentation, prototypes and validation activities, • Collaborating with customers and suppliers to resolve technical challenges and build strong partnerships, • Mentoring engineers and developing team capability across the wider function, • Driving continuous improvement, risk management and root-cause analysis initiatives, • Ensuring alignment with industry regulations, standards and best practices, • Representing engineering excellence through internal and external engagement Main Skills Needed: • Strong background in mechanical engineering within defence, aerospace or maritime environments, • Proven experience leading engineering teams and delivering complex hardware projects, • Expertise across the full product lifecycle—from concept through to in-service support, • Knowledge of mechanical design standards, materials and manufacturing processes, • Experience with structural, thermal or dynamic analysis (including FEA), • Proficiency in CAD, engineering drawings and technical documentation, • Familiarity with DFMEA, DFA, DFM and continuous improvement methodologies, • Experience working with compliant materials and modern manufacturing techniques, • Strong stakeholder engagement, communication and influencing skills What’s in It for You: • Flexible and hybrid working, including compressed hours, • Private healthcare and cash health plan, • Performance-related bonus, • Holiday buy/sell scheme, • Ongoing professional development, mentoring and career progression, • The opportunity to work on meaningful, technically challenging projects with real-world impact Call to Action: If you’re nodding along, let’s take the next step. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. By applying you are confirming you are happy to be added to the Addition Solutions mailing list regarding future suitable positions. You can opt out of this at any time simply by contacting one of our consultants.

Job Title: Systems Engineer Location: Greenford, London UK (Hybrid working available) Salary: Up to £60,000 per annum About the Role We are seeking a motivated and ambitious Systems Engineer to join a growing engineering team delivering advanced maritime and defence technology solutions. The organisation specialises in the design and development of cutting-edge sonar and anti-submarine warfare systems used in naval operations worldwide. This is an excellent opportunity for an engineer with early career experience to gain exposure across the full systems engineering lifecycle while contributing to complex, mission-critical projects in a highly innovative environment. Key Responsibilities • Support the delivery of systems engineering activities across the full project lifecycle, from concept through to in-service support, • Assist with requirements capture, analysis, and management activities, • Contribute to system design, integration, verification, and validation processes, • Produce and maintain technical documentation and systems engineering artefacts, • Collaborate with multidisciplinary teams including software, hardware, and mechanical engineering, • Support system testing to ensure performance, compliance, and operational effectiveness, • Participate in technical reviews, design reviews, and engineering discussions, • Assist in identifying and resolving technical issues throughout project delivery Key Requirements • 2-3 years' experience within a Systems Engineering or related engineering role, • Understanding of the systems engineering lifecycle and methodologies such as the V-Model, • Experience using requirements management tools such as DOORS, Jama, or similar, • Strong analytical, problem-solving, and communication skills, • Ability to work effectively within cross-functional engineering teams, • Degree qualified in Engineering, Physics, or a related technical discipline Desirable Skills • Experience working within defence, maritime, aerospace, or other highly regulated industries, • Knowledge of systems integration and verification activities, • Familiarity with modelling and simulation tools such as MATLAB, Simulink, or SysML, • Understanding of configuration management and change control processes What's on Offer • Competitive salary up to £60,000, • Hybrid working arrangements, • Opportunity to work on innovative and impactful defence technologies, • Clear career development and progression opportunities, • Exposure to complex, high-profile engineering programmes

Commercial Gas Engineer (HVAC) Kingston Upon Thames/Hampshire £47,752.38 (salary including on call standby 1:4) Permanent My client is on the lookout for an experienced Commercial Gas Engineer to join the team. You will have the opportunity to work on one of their leading supermarket contracts. The role will involve carrying out planned and reactive maintenance across several retail stores, maintaining, and repairing a range of commercial heating systems and air conditioning units. Additionally, you will undertake regular planned store visits to complete reactive work, PPMs and minor repairs as requested by the customer. Key Responsibilities – Commercial Gas Engineer • Carrying out PPM and reactive maintenance across a number of sites., • Service and repair a range of mechanical equipment, e.g. boilers, fans, pumps, AHU's, FCU's., • Carry out minor alterations and installations within the individual’s technical competence in accordance with current specifications., • Order spares to the laid-down procedures., • Identify non-repairable faults in plant and machinery and promptly advise the HVAC supervisor of findings, with recommendations regarding suitable replacement. Qualifications & Experience – Commercial Gas Engineer • SVQ/NVQ Level 3 within Heating/Ventilation/Mechanical / HVAC or Equivalent Qualification., • ACS Commercial Gas Qualifications COCN, CIGA, CORT, ICPN, CDGA, TPCP1/1A as a minimum. On Offer – Commercial Gas Engineer • £47,752.38 (salary including on call standby 1:4), • 45 hours a week, • 25 days + 8 bank holidays, • Overtime, • Travel time after ½ hour each way, • Van, fuel card, tools, uniform, IT equipment provided For more information on this role, please contact Harry Waller on 01453 829778 or send a copy of your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. For details of other opportunities available within your chosen field please visit our website

Job title: Software Engineer Location: London We are currently working with an exciting space engineering company in London developing next-generation spacecraft technology and looking to add a Software Engineer to the team. About them: Our client are building advanced technology for real-world space applications, working on systems that are helping shape the future of the industry. They are growing rapidly and are looking for engineers who enjoy solving complex technical challenges within a fast-moving environment. Responsibilities: • Develop and maintain software for space-based systems, • Work across embedded, flight or mission software development, • Support system integration, testing and validation activities, • Collaborate with multidisciplinary engineering teams, • Contribute to the full software development lifecycle, • Support the development of mission-critical technologies Role requirements: • Experience within Software Engineering, • Strong programming experience with languages such as C++, Python or Rust, • Experience with embedded systems, real-time software or distributed systems is beneficial, • Understanding of software testing and validation processes, • Previous experience within space, aerospace or high-performance engineering environments is advantageous, • Strong problem-solving ability and collaborative mindset

Senior Safety Engineer Location: London Rate: Up to £90 per hour (Outside IR35) Contract Length: 6–12 Months The Opportunity This is more than just a contract role - it’s an opportunity to support the safety and assurance of complex, mission-critical systems within the UK defence sector. As a Senior Safety Engineer, you will play a key role in supporting the safety lifecycle of advanced engineering systems, ensuring robust safety processes are embedded from concept through to delivery and in-service support. Working within a specialist engineering team, you will collaborate across multiple disciplines to influence design decisions, mitigate risk, and help deliver safe, reliable solutions across high-profile defence programmes. This role would suit an experienced engineer looking to apply their expertise within a technically challenging and highly regulated environment. What You Will Be Doing • Delivering safety engineering activities across complex defence programmes, • Supporting hazard identification, risk assessment and mitigation activities, • Conducting and contributing to safety studies including HAZOP, FFA, FTA, FMECA and LOPA, • Defining system safety requirements and supporting safety targets, • Producing high-quality safety cases, reports and technical documentation, • Participating in design reviews, risk meetings and safety committees, • Working closely with systems, hardware, software and project teams to ensure safe design outcomes, • Providing clear, evidence-based safety recommendations to key stakeholders What We Are Looking For • Previous experience within a safety engineering environment, ideally defence, aerospace, maritime or other highly regulated sectors, • Strong understanding of functional or product safety principles, • Familiarity with recognised safety standards such as IEC 61508 and Def Stan 00-056, • Knowledge of hardware/software failure modes and reliability principles, • Experience with hazard analysis, FMECA, FTA or similar techniques, • Ability to work effectively within multi-disciplinary engineering teams, • Degree, HND, HNC or equivalent experience in Engineering or related discipline Security Requirements Due to the nature of the work, applicants must be UK Nationals and eligible to obtain and maintain UK Security Clearance. Apply Now If you are a Senior Safety Engineer seeking your next contract opportunity in London, please get in touch for a confidential discussion.

Title: Principal Recruitment Consultant - Contract Location: London (Liverpool St - 3 days / WFH - 2 days) Sector: Contract recruitment within the Defence, Nuclear and Aerospace sectors in UK & EU Basic salary: Negotiable for the right candidate with proven track record We are seeking a new member of the team. This is to build and develop a contract only desk focusing on placing highly skilled engineers in the UK & EU defence sector. Experience of building a successful technical / engineering desk using a candidate led approach, is essential. Role Overview The Principal Consultant is a senior, contract revenue-generating individual contributor with full accountability for driving sales growth and/or delivering high-quality recruitment outcomes within their specialist market. This role requires a consistent and disciplined sales focus, a strong sense of urgency in all activity, and complete accountability for both contract revenue generation and delivery performance. The Principal Consultant owns their market, their pipeline, and their results. Operating with authority and commercial maturity, the Principal Consultant takes responsibility for outcomes, drives hiring processes forward with urgency, and protects profitability through disciplined sales execution and delivery excellence. Sales Responsibilities (Revenue Ownership & Market Leadership) • Take full accountability for achieving and exceeding persona contract billing and margin targets at Principal level., • Demonstrate consistent sales focus through proactive, high-level business development activities., • Operate with urgency in business development, client follow-up, and opportunity progression., • Own and grow a specialist market vertical, building long-term, revenue-generating, strategic client relationships., • Build, manage, and maintain an accurate and healthy sales pipeline, taking accountability for conversion ratios., • Generate high-quality job flow aligned to profitability objectives., • Conduct consultative job briefing meetings with accountability for qualifying roles and setting expectations., • Position services confidently, maintaining strong sales focus when negotiating pricing and terms to protect margins., • Identify and act on account expansion and cross-selling opportunities with urgency., • Take accountability for accurate forecasting and disciplined Bullhorn reporting., • Generate new business through strategic candidate marketing and market mapping initiatives., • Drive urgency in closing opportunities and securing client commitment., • Maintain professionalism, sound judgement, and confidentiality at all times. Delivery Responsibilities (Fulfilment Excellence & Placement Accountability) • Take full accountability for managing complex and high-value roles from intake through successful placement., • Demonstrate urgency in sourcing, screening, shortlisting, and managing interview processes to reduce time-to-fill., • Build and maintain a high-quality contract pipeline of specialist active and passive candidates., • Apply strong sales focus when presenting candidates, clearly articulating their value and market positioning., • Conduct thorough and commercially aware candidate qualification with accountability for quality and alignment., • Drive urgency throughout interview coordination, feedback loops, and offer negotiations., • Take accountability for closing offers successfully while protecting and maximising margin., • Guide clients and candidates through the hiring process with authority, structure, and urgency., • Proactively identify risks in the recruitment process and take ownership of resolving them., • Generate new business through strategic candidate marketing ('spec CVs') and market mapping initiatives., • Maintain consistent, high-quality communication with clients and candidates., • Achieve and exceed KPIs relating to placements, activity, and individual profitability., • Maintain accurate and timely Bullhorn documentation with full ownership of data integrity. Commercial Accountability • Full accountability for individual contract revenue, margin performance, and pipeline health., • Responsible for maintaining consistent contract sales focus across both business development and delivery., • Expected to demonstrate urgency in daily activity levels and opportunity progression., • Accountable for managing both effort and outcomes without reliance on supervision., • Responsible for protecting profitability through disciplined negotiation and process control. Minimum Requirements • Minimum 4+ years’ recruitment experience with consistent evidence of revenue accountability., • Proven success in exceeding billing and margin targets., • Demonstrated ability to operate with urgency in a fast-paced, commercially driven environment., • Strong and consistent sales focus across both client and candidate engagement., • Advanced negotiation and influencing capability., • Highly organised with strong prioritisation and time management skills., • Exceptional written and verbal communication skills., • Strong Bullhorn system proficiency with disciplined reporting standards. Behavioural Expectations • Demonstrates accountability for personal revenue, delivery of quality, and professional standards., • Operates with urgency in business development activity, client responsiveness, and placement execution., • Maintains a disciplined and visible sales focus in every professional interaction., • Take ownership of challenges and implement proactive solutions., • Exhibits resilience and persistence in achieving ambitious revenue targets., • Maintains professionalism, integrity, and sound commercial judgement at all times.

Job Title: Aircraft Maintenance Supervisor Salary: £82,924 per annum plus shift allowance (£7,725) plus sign on bonus Location: London City Airport We currently have a vacancy to join a British, regional airline as an Aircraft Maintenance Supervisor, to be based out of London City airport. Established almost 20 years ago, they currently have a fleet of 20 aircraft and operate a network of domestic and European services serving both the business and leisure markets. They hold a UK CAA Type A Operating Licence. Reporting to the Manager LCY Engineering, the Aircraft Maintenance Supervisor- UK CAA Part 66 B1 or B1/B2 will join the close- knit line maintenance team where you will lead a skilled group of Licensed Engineers maintaining a modern Embraer E190 fleet. As on-the-day leader, you’ll play a pivotal role in shaping a culture built on integrity, teamwork, and continuous improvement. London City offers a fast-paced, high-frequency operation defined by short runways and steep approaches- a truly unique environment where leadership and precision matter. You’ll oversee the delivery of safe, compliant, and efficient maintenance activity, ensuring the team meets both scheduled and reactive demands. You’ll coordinate work requirements, defect rectification, support AOG recovery, and drive operational excellence through clear communication and hands-on leadership. Your role will be central to promoting a positive culture that supports both today’s operation and tomorrow’s growth. You’ll bring a solid understanding of current CAA Part 145 procedures, along with proven experience leading engineering teams in a dynamic line maintenance environment. You’ll be adaptable, forward-thinking, and committed to building a culture where reliability, accountability, and development are at the heart of everything. Familiar with modern maintenance technologies and a passion for mentoring others will help you succeed in this role. They operate a 5-5-4 shift pattern with a 2 weekends off per month guaranteed (day and night shifts or solely night shift). Main Responsibilities: • Lead by example in setting and upholding standards of behaviour, performance, and technical excellence within the maintenance team, • Supervise shift operations while actively participating in aircraft maintenance tasks to ensure operational efficiency and compliance, • Coordinate scheduled and unscheduled maintenance activities at London City Airport to maintain aircraft availability., • Act as the primary point of contact for Maintroland Airport operations during the shift, ensuring timely communication and execution of technical instructions., • Maintain and communicate shift handovers, including accurate diary entries and comprehensive verbal briefings to ensure continuity., • Mentor and support the development of engineers, mechanics, and apprentices through on-the-job training and guidance., • Participate in and lead maintenance activities, ensuring tasks are completed efficiently and to the required standard., • Carry out product sample, competency assessments and engineer coaching. Benefits Include: • Basic salary of £82,924 per annum, • Annual shift allowance of £7,725, • Sign on bonus of £3,000, • Overtime available at current rate x 2 for days and nights, • 24 days inclusive annual leave, • Pension plan- 4% employee contribution and 6% employer contribution with the option to increase employee contributions., • Life assurance- 4 x annual basic salary, • Company sick pay, • Referral bonus scheme, • A range of salary sacrifice schemes including electric vehicle scheme and cycle to work scheme, • Gym and retail discounts, • Staff travel benefits including unlimited basic and premium standby tickets on worldwide flights through our parent company. You will also receive up to 30 discounted airfares per year for yourself, family and friends About You: • CAA Part-66 Category B1 or B2 licence with minimum 5 years certification experience., • At least 1 current aircraft type authorisation, • Embraer E190 Type rating desirable, but training can be provided, • Valid full UK driving licence (or equivalent), • Ability to hold an airport restricted zone access, • Ability to hold an airside driving licence, • Strong leadership and people skills, • Strong technical decision making, • Strong analytical and problem-solving skills, • Effective communicator at all levels within the Organisation, • PC literate, can work with engineering systems and document management systems, • Create a safe and secure work environment and a culture of open reporting, • Can work under pressure to timescales About Aeropeople: Whether you’re looking for your next job or searching out the next superstar to join your team… Aeropeople’s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses. During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period. For the latest news, events and jobs please search ‘Aeropeople Ltd’ on LinkedIn and Facebook for our latest jobs

Generative Engineering is bringing AI design into the real world by enabling generative engineering design for physical products. Our focus is creating millions more engineers globally and giving them the data and knowledge necessary to make efficient decisions quickly, one of the main challenges of the physical engineering industry today. Our team has a background in scaling software to millions of users and successfully disrupting industries, creating Unicorn's and Decacorn's along the way. We combine the advantages of an early-stage start-up with the ability to focus on creating high-quality, high-impact systems, without the distraction of fundraising. We're looking for a Simulation Engineer to sit between our platform and our customers — using CAD, CFD, and FEA alongside the tools we're building to help real engineering teams solve hard physical problems. One day you're running simulations on a customer's geometry; the next, you're building a custom workflow on the platform. If you love CAE but get fired up by software that multiplies what one engineer can do, this role is for you. Must Haves • Any depth of FDE, applications engineering, or simulation consulting experience — we don’t care how many years you’ve been working. If your work is great, your judgment is sharp, and you can apply properly, you’ve got an interview., • Hands-on experience with at least one major CAD package (SolidWorks, NX, CATIA, Creo, Fusion 360, Onshape, etc.), • Strong CFD experience in production tools (Ansys Fluent, STAR-CCM+, OpenFOAM, Simcenter, etc.) — you’ve meshed ugly geometry, debugged solver convergence, and explained results to non-experts., • Strong FEA experience (Ansys Mechanical, Abaqus, LS-DYNA, Nastran, Simulia, etc.) — structural, thermal, modal, nonlinear; we don’t mind which, as long as you really know it., • A customer-facing instinct: you can sit with an engineering team, understand what they actually need (not just what they asked for), and translate that into a working solution. Nice to Have • A degree in Mechanical, Aerospace, or a related engineering discipline —, • Multiphysics or coupled simulation experience (FSI, conjugate heat transfer, electromagnetics, acoustics, etc.)., • Generative design / topology optimization experience (nTopology, Altair Inspire, Fusion Generative, etc.)., • Scripting against simulation tools via their APIs (Ansys ACT, Abaqus Python, OpenFOAM dictionaries, Simcenter Java macros, etc.)., • Meshing wizardry — Pointwise, Fidelity, ANSA, or whatever lets you tame nasty CAD., • HPC experience — running solvers on clusters, Slurm, AWS ParallelCluster, or similar., • Scientific Python: NumPy, SciPy, pandas, PyVista, meshio, trimesh., • Docker, AWS, and general comfort moving between cloud and desktop engineering tools., • Open-source contributions, especially in CAE / simulation / geometry., • Experience presenting technical results to non-technical stakeholders — execs, procurement, product managers., • Just state the word ‘Salmon’ anywhere in your application, just to prove you can read a job advert., • Comfort with Python — enough to script, automate, and build glue between simulation tools and our platform. We aim to improve all our colleagues’ abilities and careers by exposing them to the bare bones of a tech start-up whilst giving them the opportunity to support the company in any way. If our people continuously improve, so does our product.

Location: South West London Salary: £50k - £67k Clearance: SC (or eligible) Control Systems Engineer to work for a defence company in based in SW London. You will be designing and testing solutions for SCADA Systems and operating systems using RedHat Linux. These solutions are vital to meeting to needs of a range of defence industry clients. Requirements: • Experienced in the use of High-Level Programming Languages within SCADA IDE environments such as VB, C#/C++., • Hands on knowledge of RedHat Linux operating systems., • Experience within Defence, Maritime, Aerospace, or a similarly regulated industry., • Security Clearance: due to the nature the work, you MUST be a British Citizen without dual nationality.

About the Company Since 2009, Yibi Precision has been a leading OEM specialist in Metal Injection Molding (MIM), integrating innovation, precision, and reliability into every solution we deliver. With over 1000 employees and a 50,000 sqm facility, we are proud to serve global clients across industries such as medical, automotive, aerospace, and high-end consumer electronics. • Expertise in MIM: High-performance parts (0.1g to 800g) with tolerances as tight as ±0.05mm., • Full In-house Control: A 30-person mold workshop and end-to-end capabilities including CNC, stamping, laser engraving, and PVD plating., • Global Standards: Certified with ISO 9001, IATF 16949, and Sedex 4P. About the Role We are seeking an entrepreneurial technical professional to pioneer MIM technology adoption and drive new business development across European industrial markets. This is not a traditional sales role; you are a Technology Evangelist. You will bridge the gap between Yibi’s world-class engineering in China and the sophisticated manufacturing needs of European clients, positioning Yibi as the preferred strategic partner for complex metal components. Responsibilities • Market Pioneering & Strategy: Develop and execute a comprehensive "Go-to-Market" strategy to establish Yibi as the MIM technology leader in Europe. Identify "blue ocean" opportunities in sectors where traditional manufacturing (CNC/Casting) can be replaced by MIM for better ROI., • Technical Consulting & Design Optimization: Lead collaborative "Design for Manufacturability" (DfM) sessions with client engineering teams. Conduct in-depth technical consultations to solve complex design challenges using Yibi’s material science and MIM capabilities., • Strategic Client Acquisition: Lead the entire acquisition process from initial technical pitch to project implementation. Build a robust pipeline of high-value opportunities through systematic market mapping and targeted outreach., • Thought Leadership: Establish Yibi’s authority in the European market by representing the company at industry conferences, delivering technical workshops, and developing case studies that demonstrate our innovative edge. Qualifications • Education: Bachelor’s degree or higher in Mechanical Engineering, Materials Science, or a related technical field is mandatory., • Experience: 5+ years of success in technical business development or application engineering within precision manufacturing (MIM, Die Casting, or CNC experience preferred)., • Market Knowledge: Proven track record of introducing new manufacturing technologies to skeptical markets and converting them into long-term partnerships., • Language: Native or Full Professional Proficiency in BOTH German and English is mandatory., • Mindset: An entrepreneurial "Hunter" spirit with the ability to work independently and manage complex, long-cycle technical sales. Required Skills • Technical business development, • Application engineering, • Precision manufacturing, • MIM, • Die Casting, • CNC experience, • Market mapping, • Strategic outreach, • Design for manufacturability, • Technical consulting Preferred Skills • Experience in leading workshops, • Developing case studies, • Representing companies at industry conferences Equal Opportunity Statement Yibi Precision is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. How to Apply If you are passionate about advancing manufacturing technology and driving growth through innovation, we encourage you to apply. Please submit your CV and a cover letter detailing your experience with MIM technology and new business development via ___ or our career portal.

Sales isn’t for everyone. But it was for Rory. 11 months ago, Rory was a tree surgeon. 🌳No sales experience. No network. No shortcuts. Since joining Gemba, he has: • Doubled his salary through commission + bonus alone (in just 10 months), • Closed his first £50K deal, • Achieved £100K months (that's up to £12K commission in one month), • Worked with companies like Colgate, Merck, Danaher and GE Aerospace (if you don't know them - they're huge!), • Made company history twice Nothing was handed to him. He showed up, did the work, and got better every week. He took early calls and late calls. Scheduled meetings during his lunch break. Treated the role like his own business. This role is the same. You could be Rory. You’ll start as a BDR. You’ll learn fast. You’ll prospect hard. You’ll get rejected a lot. And if you stick with it, you’ll build a career most people never access. We’ll give you: • Clear targets and real accountability 🎯, • Coaching from people who have done it before 🤗, • Access to close your own deals 🤝, • Uncapped commission 💸 We’re looking for people who: • Are competitive and self-driven, • Don’t need hand-holding, • Care more about outcomes than comfort, • Are willing to do the volume early to earn the results later If you want an easy job, this isn’t it. If you want to challenge yourself, earn well, and build something real - apply! You’ll meet Rory.

Who We Are Gamma Technologies (GT), the global leader in multi-physics system simulation software, develops a suite of integrated solutions designed to guide and accelerate the engineering transformation of today’s products. Fusing advanced physics with AI algorithms, our platform, GT-SUITE, is used to simulate a broad range of systems from early stage development to digital twin applications across multiple industries including transportation and mobility, marine, aerospace and defense, power and energy, data centers and HVACR. At Gamma Technologies, our people are the driving force behind our success. We are seeking an Account Manager, Data Centers who shares our commitment to authentic innovation, trusted partnerships, bold decisions, and a relentless focus on customer success. What You Will Do You play a strategic role in driving growth for Gamma Technologies’ data center solutions. This position focuses on helping existing clients maximize the value of GT software in their data centers environments while expanding adoption across their organizations. Additionally, the role will lead new business development initiatives targeting prospective customers in key sectors such as hyperscale operators, colocation providers, cloud service providers, and mission-critical infrastructure organizations. This position requires a dynamic individual with exceptional communication skills, a proven track record in complex B2B software sales, and the ability to position GT-SUITE as a leading platform for data center performance, efficiency, and reliability. • Identify and pursue new business opportunities with prospective accounts and expand GT’s footprint within existing accounts, • Build and maintain strong relationships with decision-makers, demonstrating the value of GT’s data center solutions, • Drive outbound sales efforts through prospecting into new departments, divisions, and global locations of existing customers, as well as new customers, using email, phone, social media, and networking, • Represent GT at industry tradeshows, conferences, and customer events to promote data center solutions, • Work closely with technical teams to tailor solutions for customer needs and ensure successful implementation, • Ability to travel 30–50% (domestic and international). What You Will Bring • Bachelor’s or Masters Degree in Engineering (Mechanical, Electrical, or related field), • Prior five (5) years in business development or technical sales within CAE, simulation, IoT, or digital twin domains, • Demonstrated success in selling complex B2B software solutions, • Familiarity with system simulation tools (GT-SUITE preferred), digital twin concepts, and Industry 4.0 technologies, • Strong verbal and written communication skills, • Ability to translate technical capabilities into business value, • Proficiency with CRM tools and Microsoft Office Suite What we Can Offer You • Dynamic and highly talented team of experts., • The opportunity to bring in your own ideas, implement them and make them accessible to a large customer base., • The opportunity to build a professional network in various branches of industry., • This is a remote position, based in United Kingdom., • An attractive salary and additional company benefits. We’re an Equal Opportunity Employer, dedicated to creating an inclusive workplace for all.

Location: Wandsworth, London, UK (Hybrid Working) Type: Full Time, Permanent Contract Working Hours: Monday to Thursday, 9:30 am - 6:00 pm, Friday 9:30 am - 5:00 pm (1-hour lunch break) Company Overview FAC Technology is a deep-tech company based in London. Founded in 2011, it specialises in the research and development of advanced composite materials for the aerospace, space, automotive and defence sectors. The company’s materials have best-in-class properties including: ultra-high toughness, fire resistance, high thermal conductivity, and vibrational dampening. The company has developed: • A portfolio of quadcopter UAVs based on proprietary advanced composite airframes. They exhibit exceptional speed, range and lift capacity, • A family of novel composite materials designed to replace aerospace grade aluminium alloys, • A family of patent-pending high-performance resins designed for next-generation electric motors, • A family of patent-pending satellite potting compounds offering the lowest density on the market and designed for automated production The company has entered a period of high growth and is seeking a strategically driven Commercial Director to help bring its next-generation materials and products to market. Role Summary You will be working closely with the Executive Director across the commercial and strategic leadership of the company. You will lead the company’s business development function to drive revenue growth and profitability. You will engage with clients, prospective customers and partners, and will secure new relationships across the company’s target sectors. You will deputise for the Executive Director on commercial and operational issues. This will include working with production partners, the supply chain as well as general company management. You will have substantial influence on the evolution of the company, including having oversight of administrative processes, talent acquisition, and continuous operational improvements. Key Responsibilities • Lead the company’s business development and commercial activities regarding quadcopter UAVs, composites, advanced resins and adhesives, • Identify, approach, and secure B2B sales opportunities., • Build and negotiate strategic partnerships, licensing, and distribution deals., • Provide board-level input and commercial insight to support strategic decision-making., • Work closely with the technical team to align market needs with product development., • Represent the company at industry events, trade shows, and client meetings, and coordinate the creation of relevant marketing material., • Deputise for the Executive Director with operational, administrative and strategic management of the company Ideal Candidate Profile • 5+ years of director-level experience, • A scientific or technical engineering background, • Proven track record in B2B sales, commercial deal-making, and business development., • Experience operating at a strategic or board level within a high-tech or materials-related business., • Familiarity with launching innovative or patent-protected technologies., • Willingness to travel within the UK and internationally, • Exposure to one or more of the following industries:, • Automotive (including Electric Vehicles), • Aerospace, • Space, • Defence What We Offer • A competitive and negotiable remuneration package, including a base salary of £90,000 to £100,000 dependant on experience, • Ad hoc performance bonuses, • A hybrid working option to support work-life balance., • The opportunity to lead the growth of a highly innovative business