Cad engineer jobs in OxfordCreate job alerts

Archangel Lightworks is a connectivity company building wireless technology to create the space-enabled networks of the future. We’re passionate about improving humanity’s communications infrastructure and solving some of Earth’s most critical problems, from economic inclusion to climate change. Our start-up is a fast-paced and supportive environment, where you can make your mark as part of a growing team and work on the cutting-edge of innovation. We’re looking for a Mechanical Engineer / Mechanical Design Engineer to join our experienced engineering team and deliver novel laser communications technology. You will be working on the development of our structural and mechanical systems for our optical communication terminals, with a near-term focus on ground systems. This includes modifying existing designs to meet new needs in addition to designing new equipment. In this role, you will work closely with our Senior Mechanical Engineer and with the Optical, Electrical and Controls disciplines to deliver high performance structures and mechanical pointing devices. This role would suit an engineer who enjoys solving challenging, real-world mechanical problems by taking ownership of designs through iterating and testing. Your responsibilities will include: • Design of mechanical components and assemblies to support the development of cutting-edge products, • Structural analysis of components and systems, including hand calculations and FEA, • Creation of detailed drawings and supporting documentation, • Supporting and participating in practical assembly, integration, and test activities, • Working with external suppliers and manufacturers, • Degree in Mechanical Engineering or equivalent, • 4+ years of industry experience in mechanical design excluding placements, • Competent use of CAD and FEA software (SolidWorks and ANSYS preferred), • Good Design for Manufacture knowledge; manufacturing processes such as metal CNC and materials knowledge, • Proven ability to produce manufacturing-ready drawings and tolerances to the drawing standard ISO BS 8888 and GD&T, • Practical experience with mechanical assembly and system integration, • Able to work independently in a fast-paced environment, • Skilled in hand calculation and engineering simulation, • Experienced with opto-mechanical or high-precision mechanical design, including alignment-critical assemblies and sensitivity to thermal expansion, • Experienced designing pointing mechanisms, precision motion systems or rotating assemblies which include bearings and motors Salary: £40,000 – £50,000 Compensation & Perks: • The opportunity to make a difference building cutting edge technology to support a world-changing vision, • Options for hybrid working and custom arrangements that matter to you, • 25 days annual leave allowance plus bank holidays, • Equity options in a growing start-up, • Investment in you to help you grow, with training resources and budget, • Supportive team culture with high levels of ownership and responsibility, • Annual team retreat, regular socials and weekly team lunch, • Variety of additional perks including learning and wellbeing app subscriptions

Mechanical Design Engineer We are seeking a talented and motivated Mechanical Design Engineer to join our growing engineering team. This is an exciting opportunity to work on innovative products, supporting development from concept through to production and continuous improvement. Key Responsibilities • Design and develop mechanical components and assemblies, • Support analysis activities, including thermal, structural, and system-level considerations, • Contribute to New Product Introduction (NPI) and ongoing product improvement initiatives, • Collaborate with cross-functional teams across mechanical, electrical, and systems engineering, • Support prototyping, physical builds, and testing activities within R&D Skills & Experience • Strong experience in CAD design, ideally using SolidWorks, • Good understanding of at least one of the following disciplines, with awareness of others:, • Mechanical systems, • Thermal systems, • Electrical systems, • Knowledge of thermal and/or structural analysis, • Previous experience in product improvement and engineering change processes, • Experience working within a regulated industry Apply now or contact Gemma for more information.

We are working with a leading MedTech company who are currently undergoing a significant technical transfer of existing product manufacturing to an external CDMO. To support this transition, they require an experienced CAD Engineer to lead a high-volume remedial project. They are need a meticulous draftsperson with extensive SolidWorks and PDM exposure to ensure our 3D models and 2D drawings are accurate, manufacturable, and fully compliant with GD&T standards. The Focus While many roles focus on high-volume consumables, this position is tailored for an engineer who understands low-volume, high-quality metalwork. You will be working primarily on: • Sheet-metal work and machined components., • General Dimensioning & Tolerancing (GD&T) within 3D models., • Legacy drawing remediation for our retained unit. Your Responsibilities Working under the direction of the Senior Mechanical Engineer and the CI & NPI (TT) Manager, you will: • Revise & Update: Manage high-volume updates to SolidWorks 3D models and 2D drawings., • Fabrication Ready: Produce accurate drawings for laser cutting, CNC folding, welding, and mechanical assembly., • PDM Mastery: Manage the entire lifecycle of drawing files—from revisions and documentation to navigating the PDM approvals workflow., • Collaborate: Work closely with on-site engineering and production teams to resolve technical discrepancies., • Standards: Maintain structured documentation aligned with ISO and project-specific quality standards. Skills & Experience Required • Expert SolidWorks User: Deep proficiency in both 2D and 3D modeling/detailing., • PDM Power-User: Hands-on experience with revision control, file management, and workflow approvals., • Metalwork Specialist: A strong background in fabrication processes (machining, welding, CNC)., • GD&T Expert: A thorough understanding of Geometric Dimensioning and Tolerancing., • Methodical Mindset: A high level of attention to detail and a commitment to drawing accuracy.

Lightricity is a high-tech SME which has developed ultra-high efficiency light (photovoltaic) energy harvesting technologies for IoT and space applications. Our indoor PV technology provides power to smart devices and sensors without the need for disposable batteries, providing a sustainable and cost-effective solution for powering billions of smart devices and sensors. Our outdoor PV technology has state-of-the-art performance and provides electrical power for micro-satellites and UAVs Lightricity is seeking a Automation / Robotics Engineer to develop systems and processes for the automated assembly of high-efficiency solar cells into solar cell assemblies. The successful candidate will play a key role in scaling up manufacturing utilising robotic equipment and automation of assembly tools. This role involves hands-on work in our laboratories to deliver automated hardware and software systems ready for use in manufacturing. The successful candidate should enjoy hands-on activities and have a relevant engineering degree. Responsibilities: • Integrate and program new robotic systems for pick-and-place, lay-down and other assembly operations, • Develop automated processes and tools for the interconnection and packaging of high-efficiency solar cells, • Develop custom software to interface with and control assembly equipment and motion stages, • Design and implement automated test sequences for quality control and performance verification, • Design and fabricate mechanical fixtures and jigs using CAD and 3D printing to support assembly and testing, • Contribute to the company’s R&D projects, • Write technical documentation, process specifications and test reports Required skills/experience: • Degree in robotics, mechatronics, mechanical or manufacturing engineering; or a related discipline, • Experience with automated assembly equipment (e.g. robotic arms), • Strong programming skills (e.g. Python) for hardware control and automation, • Proficiency in CAD software (e.g. SolidWorks) and mechanical design, • Hands-on experience in a workshop, manufacturing or laboratory environment, • Ability to work under own initiative and manage workload to meet tight project deadlines, • Eligible to work in the UK Desirable skills/experience: • Experience with industrial automation software and control systems, • Experience developing GUIs for equipment control or manufacturing dashboards, • Knowledge of machine vision systems for automated inspection, • Knowledge of electronic component and solar cell assembly techniques, • Hands-on experience in welding and/or soldering techniques, • Familiarity with space industry standards or Assembly, Integration and Test (AIT) principles Benefits: • Competitive salary, • Workplace pension, • Access to tennis court and table tennis on-site, • On-site facilities (kitchen, changing rooms, showers), • Great location in the Oxford Science Park

We’re partnering with an early-stage, venture-backed deep tech company developing advanced imaging and deployable hardware systems. As they scale, they’re looking to hire a Lead Mechanical Design Engineer to take ownership of the mechanical architecture across their core product lines. This is a key, high-impact role suited to someone who thrives in a startup environment and wants to combine hands-on engineering with technical leadership. The Role As the lead for mechanical design, you will drive the development of precision hardware systems from concept through to deployment. You’ll play a central role in shaping both the product and the engineering approach, working closely with multidisciplinary teams across embedded, systems, and test. Requirements • Strong experience in mechanical design and product development, ideally within high-performance or ruggedised systems, • Proven ability to take products from concept through to prototype and deployment, • Experience designing for challenging environments (e.g. UAVs, aerospace, defence, or field systems), • Proficiency in CAD (e.g. SolidWorks or similar), • Hands-on approach, with experience in prototyping, testing, and iteration, • PhD or advanced degree in Mechanical Engineering, Robotics, Physics, or a related discipline Apply now or contact Gemma for more information

Want to be part of a team transforming healthcare? We are supporting an innovative Oxfordshire-based DeepTech medical imaging company developing a new generation of low-dose 3D X-ray systems designed to make advanced imaging more accessible, practical and cost-effective. Having built a strong foundation in R&D, the business is now entering an exciting commercialisation phase, with products progressing towards market deployment and wider real-world adoption. As part of this journey, they are looking for a Senior Mechanical Engineer to play a key role in the design, development and industrialisation of advanced imaging systems and associated technologies. Why Join? • Join a pioneering medical imaging company at a major commercialisation stage, • Work on cutting-edge low-dose 3D X-ray products with real-world clinical and industrial impact, • Take ownership of meaningful mechanical design and development projects in a highly collaborative R&D environment Location: Oxfordshire / Begbroke site About the Role • Act as a functional expert, providing guidance and advice to colleagues in their specialist area (Mechanical Engineering and testing), • Generate practical design concepts and solutions and create models and technical drawings using SolidWorks, • Supporting the development of manufacturing processes and novel designs for new technology applications and materials, • Analyse and verify designs (including designing and carrying out stress, thermal and tolerance analyses), document results and make data led recommendations to support continuous improvement of our products and processes, • Prepare documentation and technical reports, including drawings and work instructions, and all other project documentation as required, • Liaising with internal stakeholders and key external partners to resolve design and development issues, • Take ownership for own project work, lead projects and identify and prioritise critical tasks to meet project delivery deadlines, • Works collaboratively to plan future product development in line with company objectives, • Order components and materials, liaising with suppliers to ensure project deliverables are met, • Resolve any technical issues that arise, including documenting and reporting investigatory work, • Assist with the build and progression of prototype products and develop these into production assemblies Requirements Experience: • Design engineering experience in a high technology environment, • Mechanical manufacturing processes including machining, metal fabrication, welding and advanced materials, • Leading R&D projects under a stage review product development process, • A track record in industrial product development, ideally in the medical or metrology/NDT domain, • Scoping work, making design decisions, and completing tasks within deadline and budget, • Commercial experience of working with suppliers would be advantageous, • Working within a medical device or other highly regulated industry would be welcome but not essential, • Designing for EMC to protect internal electronics Skills: • Strong technical skills including knowledge of the materials and coating processes applied in material selection, • Knowledge of GD&T applied to drawings and the assignment of realistic tolerances balancing function with cost, • Strong mechanical or electro-mechanical engineering background, and be able to apply knowledge to real-world situations, • Proficient in 3D CAD using SolidWorks, to produce designs and drawings using best practice geometric tolerances and drawing standards including experience with drawing control systems such as PDM, • Ability to produce creative and practical design solutions including appropriate analysis, incorporating electronics, PCBs cabling and sensors within a mechanical package, • Desire to mentor and develop the skills and capabilities of other team members, • Proactive, results-driven focus with the ability to successfully identify, troubleshoot and resolve issues and work to deadlines in and R&D environment If you are an experienced mechanical engineer looking to join a company bringing next-generation imaging technology into real-world use, I would be very pleased to hear from you. Please apply with your updated CV.

Job Title: Electronic Design Engineer Location: Oxford (3-Days On-Site Per Week) Salary: £40,000 – £50,000 (Depending on Experience) Note: Applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future. Job Overview: We are seeking a motivated Electronics Engineer to join a well-established and innovative manufacturer of energy-efficient products supplied globally across commercial and public environments. This role offers the opportunity to work on real-world, high-volume products where performance, reliability, and sustainability are key. You will be involved across the full product lifecycle, from concept development and prototyping through to testing, compliance, and production. A successful candidate will play a key role in enhancing existing products and developing new intelligent systems. Responsibilities: • Design, develop, and test electronic hardware for embedded and sensor-based systems (analogue, digital, and mixed-signal)., • Create schematics and PCB layouts using Altium or equivalent CAD tools., • Select components with a focus on performance, cost, and manufacturability., • Carry out hands-on prototyping, validation, and debugging of hardware designs., • Work closely with cross-functional teams includ...

Location: Oxfordshire Rate: £45-£53 per hour (Inside IR35) Contract Length: Initial 6 months Start: ASAP An innovative engineering organisation based in Oxfordshire is seeking an experienced Mechanical Design Engineer to join them on a contract basis. This is an excellent opportunity to work on complex, high-precision mechanical assemblies within a technically challenging environment. Key Responsibilities • Mechanical design of complex assemblies and precision-engineered components, • Producing detailed CAD models and engineering drawings, • Applying GD&T to ensure designs meet functional and manufacturing requirements, • Collaborating with cross-functional engineering teams Key Requirements • Strong background in mechanical engineering with significant hands-on design experience, • Proven experience working on complex mechanical assemblies, • Solid knowledge of precision engineering and GD&T, • Expert-level experience using Creo (Pro/ENGINEER)

Senior EC&I Engineer, COR7345B As an experienced Senior EC&I Engineer (Electrical, Control & Instrumentation), you'll leverage your expertise in electrical engineering to work with both internal and external engineering staff to produce electrical system designs for a variety of projects for external clients, including positioning controls for remote handling systems, machinery controls, safety circuits and LV/ELV systems to name but a few. The Senior EC&I Engineer will use electrical CAD software to produce schematics, hook-ups and other electrical design documentation, and will also take the lead on risk assessments and hazard analysis as well as supporting physical commissioning and in-house test activities. The Company The Senior EC&I Engineer will join a leading company working with clients in the nuclear sector, offering comprehensive, cutting-edge engineering solutions. The successful Senior EC&I Engineer will be joining a team who drive innovation, solve complex challenges with advanced technology and focus on sustainability and safety. You’ll have the opportunity to make a real impact in a role with excellent development opportunities in an interesting and diverse environment. Our client is committed to hiring candidates from a diverse background. They want to bring out the best in people by creating an environment where everyone fe...

We are currently looking for a BIM Lead for a large consultancy based in Oxford. As part of your role within the business you will be required to undertake the following tasks. BIM Lead Engineer duties: * Using Revit to design MEP services from RIBA stages 2-5, large residential, Leisure and commercial projects. * Autocad * Full Electrical and Mechanical Design * Support the project managers and design team * Developing and maintain company cad standards * Producing quality 2d and 3d M&E drawings and schematics * Design Meetings * Reviewing design documentation * Working with consultants, main contractors, clients and Design team * Ensure deadlines are met * Site Visits Offer * Salary £45,000 - £50,000 + Package * Flexi Working * Office working hours: 38 hours per week * Bonus Scheme * Healthcare Please apply or contact Brookfield M&E to discuss in more detail...

Job Title: Electronic Design EngineerLocation: Oxford (3-Days On-Site Per Week)Salary: £40,000 – £50,000 (Depending on Experience)Note: Applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future.Job Overview: We are seeking a motivated Electronics Engineer to join a well-established and innovative manufacturer of energy-efficient products supplied globally across commercial and public environments. This role offers the opportunity to work on real-world, high-volume products where performance, reliability, and sustainability are key. You will be involved across the full product lifecycle, from concept development and prototyping through to testing, compliance, and production. A successful candidate will play a key role in enhancing existing products and developing new intelligent systems.Responsibilities: • Design, develop, and test electronic hardware for embedded and sensor-based systems (analogue, digital, and mixed-signal)., • Create schematics and PCB layouts using Altium or equivalent CAD tools., • Select components with a focus on performance, cost, and manufacturability., • Carry out hands-on prototyping, validation, and debugging of hardware designs., • Work closely with cross-functional teams including mechanical and manufacturing engineers to deliver integrated produc...

Senior Electrical Engineer, COR7345 As an experienced Senior Electrical Engineer, you'll leverage your expertise in electrical engineering to work with both internal and external engineering staff to produce electrical system designs for a variety of projects for external clients, including positioning controls for remote handling systems, machinery controls, safety circuits and LV/ELV systems to name but a few. The Senior Electrical Engineer will use electrical CAD software to produce schematics, hook-ups and other electrical design documentation, and will also take the lead on risk assessments and hazard analysis as well as supporting physical commissioning and in-house test activities. The Company The Senior Electrical Engineer will join a leading company working with clients in the nuclear sector, offering comprehensive, cutting-edge engineering solutions. The successful Senior Electrical Engineer will be joining a team who drive innovation, solve complex challenges with advanced technology and focus on sustainability and safety. You'll have the opportunity to make a real impact in a role with excellent development opportunities in an interesting and diverse environment. Our client is committed to hiring candidates from a diverse background. They want to bring out the best in people by creating an environment where everyone feels valued, heard and supported. Benefits

Want to be part of a team transforming healthcare? We are supporting an innovative Oxfordshire-based DeepTech medical imaging company developing a new generation of low-dose 3D X-ray systems designed to make advanced imaging more accessible, practical and cost-effective. Having built a strong foundation in R&D, the business is now entering an exciting commercialisation phase, with products progressing towards market deployment and wider real-world adoption. As part of this journey, they are looking for a Senior Mechanical Engineer to play a key role in the design, development and industrialisation of advanced imaging systems and associated technologies. Why Join? • Join a pioneering medical imaging company at a major commercialisation stage, • Work on cutting-edge low-dose 3D X-ray products with real-world clinical and industrial impact, • Take ownership of meaningful mechanical design and development projects in a highly collaborative R&D environment Location: Oxfordshire / Begbroke site About the Role • Act as a functional expert, providing guidance and advice to colleagues in their specialist area (Mechanical Engineering and testing), • Generate practical design concepts and solutions and create models and technical drawings using SolidWorks, • Supporting the development of manufacturing processes and novel designs for new technology applications and materials, • Analyse and verify designs (including designing and carrying out stress, thermal and tolerance analyses), document results and make data led recommendations to support continuous improvement of our products and processes, • Prepare documentation and technical reports, including drawings and work instructions, and all other project documentation as required, • Liaising with internal stakeholders and key external partners to resolve design and development issues, • Take ownership for own project work, lead projects and identify and prioritise critical tasks to meet project delivery deadlines, • Works collaboratively to plan future product development in line with company objectives, • Order components and materials, liaising with suppliers to ensure project deliverables are met, • Resolve any technical issues that arise, including documenting and reporting investigatory work, • Assist with the build and progression of prototype products and develop these into production assemblies Requirements Experience: • Design engineering experience in a high technology environment, • Mechanical manufacturing processes including machining, metal fabrication, welding and advanced materials, • Leading R&D projects under a stage review product development process, • A track record in industrial product development, ideally in the medical or metrology/NDT domain, • Scoping work, making design decisions, and completing tasks within deadline and budget, • Commercial experience of working with suppliers would be advantageous, • Working within a medical device or other highly regulated industry would be welcome but not essential, • Designing for EMC to protect internal electronics Skills: • Strong technical skills including knowledge of the materials and coating processes applied in material selection, • Knowledge of GD&T applied to drawings and the assignment of realistic tolerances balancing function with cost, • Strong mechanical or electro-mechanical engineering background, and be able to apply knowledge to real-world situations, • Proficient in 3D CAD using SolidWorks, to produce designs and drawings using best practice geometric tolerances and drawing standards including experience with drawing control systems such as PDM, • Ability to produce creative and practical design solutions including appropriate analysis, incorporating electronics, PCBs cabling and sensors within a mechanical package, • Desire to mentor and develop the skills and capabilities of other team members, • Proactive, results-driven focus with the ability to successfully identify, troubleshoot and resolve issues and work to deadlines in and R&D environment If you are an experienced mechanical engineer looking to join a company bringing next-generation imaging technology into real-world use, I would be very pleased to hear from you. Please apply with your updated CV.

Senior Electrical Engineer, COR7345 As an experienced Senior Electrical Engineer, you'll leverage your expertise in electrical engineering to work with both internal and external engineering staff to produce electrical system designs for a variety of projects for external clients, including positioning controls for remote handling systems, machinery controls, safety circuits and LV/ELV systems to name but a few. The Senior Electrical Engineer will use electrical CAD software to produce schematics, hook-ups and other electrical design documentation, and will also take the lead on risk assessments and hazard analysis as well as supporting physical commissioning and in-house test activities. The Company The Senior Electrical Engineer will join a leading company working with clients in the nuclear sector, offering comprehensive, cutting-edge engineering solutions. The successful Senior Electrical Engineer will be joining a team who drive innovation, solve complex challenges with advanced technology and focus on sustainability and safety. You’ll have the opportunity to make a real impact in a role with excellent development opportunities in an interesting and diverse environment. Our client is committed to hiring candidates from a diverse background. They want to bring out the best in people by creating an environment where everyone feels valued, heard and supported.

Ideal candidates should have a minimum of five years of experience, particularly in machining and manufacturing, alongside strong skills in SolidWorks and Microsoft Office Suite.

Electronics Production Engineer (Manufacturing & NPI) Oxfordshire (On-site is non negotiable) Full-time, Permanent Help bring cutting-edge industrial safety technology from design to production. Laboris Solutions is working with a fast-growing, privately-owned UK technology company, built on innovation originating from Oxford University. With a strong international presence, they design and deliver advanced equipment that improves safety in hazardous industrial environments. They are looking for an experienced Electronics Production Engineer to play a key role in manufacturing, new product introduction (NPI), and continuous improvement. This is an exciting opportunity to work cross-functionally and influence the full product lifecycle—from design validation through to scalable production. Key Responsibilities • Collaborate with engineering, manufacturing, and quality teams to transition products from design to production, • Support new product introduction (NPI) activities, ensuring smooth and efficient product launches, • Liaise with contract electronics manufacturers (CEMs)and support production readiness (occasional travel required), • Develop and maintain manufacturing documentation: assembly drawings, work instructions, and test procedures, • Review designs for design for manufacturability (DFM), reliability, and failure modes (FMEA), • Support development of automated production test systems and fixtures, • Contribute to and maintain the Quality Management System (QMS), including process and documentation improvements, • Drive continuous improvement initiatives, root cause analysis, and problem-solving in production environments Qualifications & Experience • HNC (or higher) in Electronics Engineering or a related discipline, • Minimum 3+ years’ experience in electronics manufacturing, production engineering, or hardware engineering, • Strong analytical mindset, attention to detail, and technical documentation skills Required Skills • Proven experience in electronics manufacturing and production processes, • Experience working with embedded systems / embedded firmware-based products, • Strong board-level debugging and fault-finding skillsusing standard lab equipment, • Hands-on experience with new product introduction (NPI) and resolving production issues, • Proficiency in Microsoft Office (Word, Excel) Desirable Skills (Advantageous) • Experience designing automated test fixtures (e.g., scripting, PLCs, or custom test systems), • Familiarity with CAD tools (Altium Designer, SolidWorks), • Programming experience (C, C++, C#, Python) for test or automation, • Understanding of Windows/Linux system administration, • Exposure to lean manufacturing, Six Sigma, or continuous improvement methodologies Why Join This Market Leader? • Work on innovative industrial IoT and safety-critical technologies, • Be part of a collaborative, cross-functional engineering environment, • Influence products across the entire lifecycle—from concept to production, • Join a growing company with global reach and strong technical foundations Location Requirement: This is an on-site role based in Oxfordshire. Candidates must be located within a 45-minute commute

Project Engineer We are supporting a fast-growing, clean energy technology business that are looking for an experienced Project Engineer to support the planning and delivery of technical work packages within a fast-paced engineering and development environment. This role combines hands-on engineering with project coordination and cross-functional collaboration, contributing to the development of advanced industrial and process technologies. You will take ownership of engineering tasks from concept through to implementation, working both independently and as part of a wider multidisciplinary team. Key Responsibilities Deliver engineering work packages through hands-on execution and teamwork Support project planning, including scope, scheduling, and risk management Collaborate with multidisciplinary teams, including mechanical, electrical, process, and operations Work with external suppliers and contractors Carry out on-site engineering activities, including equipment assembly and modification Lead problem-solving and root cause analysis Support system and equipment development, including testing and risk analysisRequirements Degree in Mechanical, Electrical, Chemical Engineering, or similar (or equivalent experience) At least 5 years’ experience in an engineering role, ideally in R&D or development Broad technical understanding across engineering disciplines Proficiency in tools such as Excel and CAD softwareIf you are an experience Project Engineer with a background in the process / technology development, please apply now

Site Engineer - Thames Water Location: OX13 6AP Rate: £350-£400 per day Job Type: Freelance Duration: Until 2027 TRIbuild Solutions are recruiting for a Site Engineer to support delivery on a Thames Water project based in OX13 6AP. This is a long-term freelance opportunity running through to 2027, offering a strong day rate and the chance to work on a major utilities infrastructure scheme. This role will suit an engineer with civils and/or MEICA project experience, strong QA/QC knowledge, and the ability to support day-to-day site delivery alongside the wider construction team. Key Responsibilities: Assist in establishment of the site and support overall project delivery Prepare, implement and maintain QA/QC documentation including ITPs and check sheets Carry out engineering duties using Total Station, GPS, CAT & Genny Maintain accurate site records including surveys, levels, concrete cube records and QA documentation Support management of subcontractors and supply chain activities Assist with design coordination and distribution of site documentation Take responsibility for site-based duties such as permits to work Support coordination between site teams, disciplines and subcontract managers Assist with mandatory inspections including SHE, LOLER and PUWER Help develop and monitor 5-6 week look ahead programmes Prepare RAMS for directly delivered works where required Support SHEQ systems, audits and associated reviews Plan and procure materials and plant for site activities Produce red line mark ups and assist with as-built drawing records Attend weekly coordination, progress, programme and resource meetings Monitor and promote strong health, safety and environmental performance on siteRequirements: Degree or HNC in a relevant engineering discipline Good understanding of engineering principles and construction techniques Experience within civil engineering and/or MEICA projects Design management exposure Valid CSCS card Full clean driving licenceDesirable: Degree in Civil Engineering ICE Training Agreement CAD competency Previous experience at Graduate Engineer level or aboveThis is an excellent opportunity for a Site Engineer looking for a long-term freelance role on a major infrastructure and utilities project. To apply or find out more, contact Leon at TRIbuild Solutions

Our prestigous client based near Abingdon, who work in the Medical sector are looking for a Production engineer to join their growing team. The main focus of the role is o facilitate the manufacturing of high quality existing and new products through the provision of engineering support services. To assist in the definition and enhancement of manufacturing processes. To create, update and maintain drawings / models for new and released products. Main Tasks: Production Engineering Create / update CAD drawings for parts & assemblies. Creating change requests with the associated required paperwork and drawings Finding replacement parts for obsolete items. Reviewing / updating device master records. Reviewing / updating device history records. Liaise with the New Product Development department during the product development phase ensuring design for manufacture, assembly & test principals are followed. Support new product introduction activities. Ensure QMS requirements for USA FDA, ISO 13485 and MDD / MDR are met. Production Parts Quality Reviewing production reject parts for why they have failed, this includes checking the part against the drawing, reviewing the line build to see if it's an internal line issue, talking with suppliers to understand if there is an issue with their manufacturing line.Line Support Investigating production issues on the shop floor and root causing the failure. Then update drawings, procedures, etc to fix the issue. Improve production processes using key philosophies such as kaizen, poke-yoke, hidden factory, Six Sigma, etc. PROFESSIONAL/PERSONAL REQUIREMENTS HNC / ONC or extensive experience preferably in Mechanical / Manufacturing / Process Engineering Extensive use of CAD software, preferably Solid Edge / SolidWorks or equivalent, Computer literacy including the use of excel spreadsheets Knowledge of Lean manufacturing, six-sigma and other continuous improvement techniques. Excellent communication/report writing skills. Ability to work under pressure with multiple priorities Highly numerate and analytical Strong problem-solving skills Proven planning, change management and organisation skills Excellent people skills, essential due to the support function and interface of this role. SALARY/WORKING HOURS: Monday to Friday 08:30 - 17:00 ( early finish on a Friday ) £33,000 - £35,000 per annum On site parking Generous pension confribution Bonus scheme To find out more, please contact Ollie or Adam on (phone number removed) INDWARE Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be submitted to Planet Recruitment. Our Candidate Privacy Information Statement explains how we will use your information. Only candidates with the relevant skills and experience will be contacted after application, if you do not hear back from us within 7 days you have unfortunately been unsuccessful in your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the position

Project Engineer / Lead Engineer– APQP/NPI – Aerospace - Oxon We are a specialist manufacturer of complex, low-volume metallic assemblies serving the aerospace, defence, and medical sectors. Operating from our dedicated campus in Eynsham, we design and produce a range of non-ferrous components, including proprietary technologies that set us apart in the marketplace. Due to continued growth within the aerospace and defence industries, we are seeking a Project Engineer to join our team. This role will focus on industrialising products from initial concept through testing and into full-scale production, using structured APQP methodologies. This is a permanent position, based on-site in Eynsham, five days per week. What you will do • Lead and coordinate cross-functional teams during new product introduction phases, ensuring successful and timely product launches, • Implement robust processes driven by DFMEA, DVP, and PFMEA, with effective risk identification and mitigation, • Develop, maintain, and manage detailed project plans in collaboration with internal teams and customers. Act as the primary technical point of contact for both internal and external stakeholders throughout the project lifecycle, • Take full ownership of APQP processes to ensure quality, compliance, and successful delivery. Manage pilot builds and initial production runs to validate manufacturing processes and product performance, • Produce key project outputs including manufacturing BOMs, project plans, PFMEAs, control plans, quality inspection guidelines, work instructions, FAIR documentation, DVP submissions, and support internal/external gate reviews What you will need • An engineering qualification such as HNC, HND, or BEng, • A minimum of 2 years’ experience delivering engineering projects within aerospace, defence, or similarly regulated industries, • Proficiency with relevant tools and systems, including CAD, FMEA, ECR and APQP, • Eligibility to work in the UK without sponsorship, and compliance with ITAR requirements What you will get • A permanent role within a progressive, agile, and growing medium-sized company, • Competitive salary at Engineer or Lead Engineer level (depending on experience), plus a comprehensive benefits package

An exciting opportunity has arisen for an experienced Robotics Systems Engineer to join a growing space technology organisation developing advanced on-orbit capabilities. Based at a state-of-the-art facility in Oxfordshire, you’ll play a key role in shaping the design and delivery of innovative payload systems for complex space missions. This is a senior position within a highly skilled engineering team, offering the chance to lead critical aspects of payload development while mentoring others and contributing to cutting-edge solutions in a fast-paced environment. As a Senior Payload Systems Engineer (Robotics), you will provide subject matter expertise across the full lifecycle of robotic payload systems, from early concept through to testing and operations. You’ll work closely with internal engineering teams and external suppliers to deliver high-performance, mission-critical hardware under demanding timelines. Key Responsibilities Define and review system requirements and verification strategies at spacecraft, subsystem, and unit levels Lead technical engagement with robotics suppliers, including co-engineering and system compatibility assessments Support the design and development of innovative robotic hardware and associated ground support equipment Collaborate with multidisciplinary teams (mechanical, thermal, electrical, software) to solve complex engineering challenges Work closely with Assembly, Integration & Test (AIT) teams to ensure designs are optimised for manufacture and integration Contribute to hardware development throughout design, build, test, and launch phases Produce and maintain technical documentation (specifications, ICDs, procedures, reports, design descriptions) Support project lifecycle reviews (e.g. PDR, CDR) Assist with supplier engagement and procurement activities Provide technical leadership and mentoring within the team Essential Skills & Experience Degree (or equivalent experience) in Robotics, Systems Engineering, Aerospace Engineering, or a related discipline Minimum 5 years’ experience in robotics systems engineering Proven experience delivering complex, safety-critical mechanism design across the full lifecycle Strong background in robotics design, analysis, procurement, and testing In-depth understanding of robotics systems, including design trade-offs and performance considerations Knowledge of spacecraft or complex system development lifecycles (e.g. MDR, PDR, CDR) Strong systems engineering capability, including requirements management and verification Experience developing innovative hardware solutions under challenging timelines Desirable Experience Knowledge of robotic manipulators for on-orbit or remote operations Experience with magnetic systems or capture mechanisms Proficiency in CAD tools (e.g. SolidWorks, CATIA, NX, CREO) and PDM systems Familiarity with multi-body dynamics modelling (e.g. HyperWorks) Experience in kinematic modelling and robotics simulation Programming or automation experience (e.g. Python, VBA) Understanding of in-orbit servicing, debris removal, or related space mission concepts What’s on Offer Hybrid and flexible working arrangements 25 days holiday (increasing with service) + bank holidays Private healthcare and life insurance Long-term sick pay Optional compressed working pattern (9/75) Relocation support and visa sponsorship available (where applicable) Modern office and cleanroom facilities Collaborative, international team environment Regular social and team events About the Opportunity This role offers the chance to work on highly innovative space missions, contributing to the development of advanced robotic systems that will shape the future of on-orbit operations. You’ll be part of a forward-thinking engineering team working at the cutting edge of space technology, with real impact on the next generation of space systems. TT

You will like Production engineering optimisation including NPI in Witney/Oxford/Oxon for an established niche manufacturer of PPE equipment. You can enjoy working for a quality manufacturer & be proud of making a difference in safety for industry. You will like The role of Production Engineer itself, where you will play a key role in optimisation of production processes, jig & tool design & NPI. More specifically: Creating & maintaining Technical Specifications for products and components including PDM, BOMs & production routings Introduction of new products to manufacturing including tooling design Ensuring work instructions & SOP's meet the technical ‘critical x's’ of the specifications Problem solving products & part design Process improvements & manufacturing efficiency to improve production costs & quality Product Quality by ensuring processes are controlled and capable Working Hours: 8 AM-5 PM Monday to Friday Days! PS More detailed job description can be made available to shortlisted candidates, under the key headings of, delivery, quality, cost, safety, people management. You will have To be successful as Production Engineer here you will have strong engineering background, good communication skills, attention to detail & a healthy mix of the following experience: CAD/CAM New Product Introduction Tooling & Jig design Production timings & process optimisation Continuous improvement techniques Process Mapping Product Data Management Product DFM ERP system functions including Bills of Materials and Production Routings Product Costing Formal qualifications are valued but a strong track record and practical experience in similar environments are the key to success. You will get As a Production Engineer, you will enjoy a competitive salary of £40K-£50K DOE PA + Package. You can apply to the Production Engineer job opportunity by pushing the button on this job posting, or by sending your CV in confidence to (url removed). UK_MS

Product / Mechanical Design Engineer (Opto-Mechanical Systems) Overview A growing technology company developing advanced sensing and instrumentation products is seeking a Product / Mechanical Design Engineer to join its multidisciplinary R&D team. The organisation builds next-generation hardware systems that combine mechanical, optical, and product-focused engineering, with a strong emphasis on hands-on development and rapid iteration. This is an opportunity to join a fast-moving development environment where you’ll contribute directly to real-world products, working across concept, design, prototyping, and validation. The role is primarily based on-site to support collaboration and hands-on system development, with some flexibility for hybrid working where appropriate. The Role You will play a key part in the development of complex hardware products, with a particular focus on opto-mechanical systems and productised hardware. The role blends mechanical design, practical prototyping, and cross-disciplinary collaboration, working closely with engineers from adjacent domains. You’ll be expected to take a systematic, hands-on approach to problem solving and to operate effectively in a dynamic, evolving product development environment. Key Responsibilities Design and develop mechanical and opto-mechanical hardware for product-focused systems Produce detailed 3D CAD models, assemblies, and technical drawings Support materials selection and manufacturing process decisions Build and iterate prototypes using in-house and external fabrication methods (e.g. 3D printing, machining, laser cutting, cable assembly) Contribute to system integration, testing, and validation activities Create and maintain technical documentation including specifications, drawings, BOMs, and build instructions Work closely with cross-functional teams to deliver robust, manufacturable product designs Support continuous improvement of designs, processes, and documentation Required Qualifications & Experience Degree, HND, or equivalent industrial experience in Mechanical Engineering, Engineering, or a related discipline Around 3+ years’ experience in product development within a multidisciplinary R&D or product development environment Demonstrated experience developing opto-mechanical or precision hardware systems Strong grounding in mechanical design principles, materials, and common manufacturing processes Proficiency in 3D CAD (SolidWorks or similar), including complex assemblies and detailed drawings Hands-on prototyping experience (e.g. SLA/FDM 3D printing, basic machining, laser cutting, cable assembly) Comfortable working in a fast-paced, evolving development environment Desirable Experience Experience producing clear technical documentation (specifications, test procedures, build instructions, revision control, BOMs) Background in a start-up, scale-up, or new product development environment Exposure to product design or user-focused design considerations Working knowledge of electronics, firmware, or adjacent engineering disciplines What’s on Offer Opportunity to work on cutting-edge, real-world hardware products High-impact role in a growing, technology-focused organisation Hands-on involvement across the full product development lifecycle Collaborative, multidisciplinary engineering environment Strong scope for technical growth and ownership

Do you have a background in EDS 3D CAD Engineering?. Expleo are seeking a highly organised and proactive EDS 3D CAD Engineer, who will be responsible for the inception, development and release 3D Harness design and packaging across a broad range of prototype projects. Key Responsibilities of the EDS

Our client, a growing and forward-thinking engineering organisation, is looking to welcome a CAD Designer (Mechanical) into their team. If you’re looking to take the next step in your CAD, mechanical design, or engineering career, we’d love to hear from you. Are keen to learn and develop within

CAD support using Autodesk Inventor, working closely with engineering and project teams to develop equipment solutions that meet manufacturing process requirements. This opportunity offers exposure to complex engineering programmes, a professional team setting, and the chance to apply your expertise

They are now seeking a skilled and experienced CAD Engineer to join their trusted and successful business. To assist with the production of CSV notching files by manually extracting applicable data from live drawings using bespoke software built into AutoCAD. THE CANDIDATE : Good knowledge of AutoCA

Candidates should possess a Civil Engineering Degree, experience with CAD, and the ability to manage commercial projects. A leading civil engineering contractor in the UK is seeking a skilled professional to oversee technical aspects and project management within groundworks projects.

A technology client in the engineering sector is seeking a Graduate Production Engineer to join their team near Cambridge. Candidates should hold a Master's degree in Engineering and be proficient in CAD and Microsoft 365.

A leading engineering recruitment firm is looking for a Senior Mechanical Design Engineer in West London. This permanent role requires at least 5 years of experience, a relevant engineering qualification, and proficiency in 3D CAD software such as Autodesk Inventor and SolidWorks.

A renewable energy developer is seeking a CAD Engineer to support the design of large-scale solar PV and battery storage projects in London. The ideal candidate will have a relevant degree and experience in CAD and GIS, demonstrating strong technical skills and organizational abilities. Responsibili

A global engineering company based near York is seeking a Graduate Mechanical Engineer to work on design and development projects in the Renewable and Oil & Gas industry. Candidates should possess an MEng or BEng degree in Mechanical Engineering with strong communication skills and some experience w

A mission-driven start-up in AI infrastructure is seeking a highly capable CAD Engineer to produce detailed CAD models and technical drawings. Applicants should be comfortable with industry-standard CAD software such as AutoCAD and SolidWorks, possess strong communication skills, and have a keen att

An electrical manufacturing company in the UK seeks a motivated Electrical Project Engineer to manage projects from sale through to final sign-off. Responsibilities include reviewing project handovers, producing electrical schematics using AutoCAD, and coordinating with clients and internal teams.

A global engineering consultancy is seeking a Junior Track Engineer in London to support major rail infrastructure projects. The ideal candidate will have a degree in civil engineering and at least two years of experience in track engineering. You will utilize your technical expertise in track desig

Following their exciting pipeline, they are now looking to expand their team through the hire of a CAD Design Engineer to help support their design processes across their solar and battery storage projects. This company was founded over a decade ago and has since built a strong portfolio, with a mul

Roc Search Europe Limited is seeking an HVAC CAD Engineer in Peterborough. Candidates should have strong AutoCAD experience and the ability to conduct site surveys. This hybrid role combines AutoCAD design and on-site surveying.

A leading engineering recruitment firm is seeking a Mechanical / Tooling Design Engineer in the East Midlands. Ideal candidates will possess a BEng in Mechanical Engineering, experience in tooling design, and proficiency in 3D CAD software.

The ideal candidate will have at least 5 years of CAD Design experience and a degree in Mechanical Engineering or related field. Responsibilities include developing detailed designs and ensuring compliance with engineering standards. A leading recruitment agency is seeking a Design Engineer to join

A thriving engineering firm in York is seeking an experienced CAD Design Engineer to join their expanding team. The ideal candidate should possess a background in mechanical engineering and be proficient in AutoDesk applications. This position offers an opportunity to contribute to a variety of engi

A leading engineering consultancy in the UK is seeking Principal/Associate Engineering OHL candidates with a strong background in transmission and distribution design. This role requires proven experience in designing overhead transmission lines, including the use of PLS-CADD and PLS-Tower for vario

Atlas Copco Group is looking for a Drawing Engineer to undertake site surveys and audits of Medical Gas Pipeline Services in Chesterfield, UK. The ideal candidate will have a higher-level qualification in mechanical or electrical engineering and relevant experience in healthcare environments.

Following their exciting pipeline, they are now looking to expand their team through the hire of a CAD Design Engineer to help support their design processes across their solar and battery storage projects. Preparing high-quality CAD and GIS drawings to support land agreements, planning applications

A leading engineering company in Derby is seeking a Senior Design Engineer to join their innovative team. Ideal candidates will have strong experience in design engineering and be familiar with 3D CAD and PLM systems. Responsibilities include designing components, creating CAD models, and ensuring s

Automation Experts Ltd is seeking a Mechanical Design Engineer in Lincolnshire to design components and support product development. This role involves creating detailed 3D CAD models and manufacturing drawings, implementing design changes, and conducting validation tests. Candidates should be profi

A leading technology company in the Greater London area is seeking a CAD Engineer to assist in developing infrastructure for automating chip design processes. This role requires expertise in RTL simulation tools and a strong educational background in Electrical Engineering or related fields.

Roc Search GmbH is seeking a hands-on HVAC CAD Engineer based in Peterborough. Responsibilities include conducting site surveys, producing accurate CAD drawings, and ensuring designs are practical. Candidates should have strong AutoCAD experience and the ability to interpret technical drawings.