Cad engineer jobs in BirminghamCrear alertas

About Zhuzhou CRRC Times Electric UK Innovation Center Zhuzhou CRRC Times Electric UK Innovation Center (TEIC) is a subsidiary of the CRRC Corporation Limited, the world’s leading propulsion and control systems provider in the rolling stock industry. Our mission is to design, develop and produce state of the art power electronics systems and components for automotive electric vehicles, rail, and renewable energy sectors. Please Follow us on LinkedIn or visit for further details. Overview of the role: We are looking for a Senior System Design Engineer to join our team at TEIC. This role will be responsible for the design, simulation and optimization of power electronics converter system, component technical specifications and interface definition, component sourcing and procurement, system integration, system testing, and promote technology exchange and cooperation. What you will be doing in this role: • Responsible for system design for prototype development of power electronics converter, including but not limited to system technology requirements analysis, system solution design, system simulation optimization;, • Research on cutting-edge technology and market demand for power electronics converter, and form a phased research report;, • System integration, including source and procurement of components, coordination and participation in prototyping;, • System integration testing, including test programming, test results collation and review;, • Participate in the development of the company's technical route planning;, • Responsible for sub-component technical specification definition, interface definition, and participation in sub-component development work;, • Perform an integrity review of the system design work and be responsible for archiving the project achievements;, • Technical exchanges with market personnel, suppliers, customers, bidding, etc.;, • Provide other management support; Other responsibilities • Budget control on prototype development;, • Actively collaborate with other groups and colleagues in the same group on current projects, organize relevant meetings, follow up and timely report on key issues;, • Establish and maintain effective working relationships with core technology members to ensure efficient and rapid delivery of technical information within the department;, • Manage and maintain the relationship with external suppliers, universities and research institutions and customers, keep efficient communication, and learn about cutting-edge technology;, • Commitment to equality of opportunity;, • Commitment to Health & Safety in the workplace;, • Further enhance work ability and pursue better career development;, • Complete other work assigned by line manager; We would like you to have: • Power electronics or other related degree, with 5 years of working experience in power electronics;, • PhD degree with at least 3 years related experience;, • Rich experience in hardware design of power electronic converter projects based on IGBT or SiC MOSFET at 1200V voltage level or above;, • Experience on different topologies of converters, e.g. AC/DC, DC/AC, DC/DC, etc., and the control strategies;, • Experience on multi-level converter development, e.g. 3 level, 5 level, or higher;, • Components loss analysis, system efficiency mapping and thermal simulation;, • Familiar with the basic process of development of power electronics converter, relevant standards and laws and regulations, and have deep understanding and practical experience;, • Rich experience on control loop design, simulation, and testing;, • Hands on experience on application software implementation;, • Proficiency in Plecs, Matlab, CAD, CAE, Ansys, Office software;, • Understand principle of mechanical structure design, ability to perform concept package study;, • Attention to the details in work to ensure accurate job information;, • Hardworking, passionate, strong sense of professionalism and responsibility;, • Excellent communication and coordination skills;, • Excellent system thinking and coordination skills;, • Strong resistance to stress and flexible handling of urgent tasks at work;, • Excellent time management;, • Excellent English communication and ability to prepare technical documents; Benefits TEIC is a great place to work with opportunities for professional and personal development. Our benefits include: • 25 days holiday + 8 bank holidays, • Holiday allowance increase with length of service, • Bupa healthcare, • Healthcare vouchers, • Free on-site car parking, • Free EV charging, • Free lunch Monday to Friday, • Contributory Pension, • Life assurance, • Company sick pay, • Professional Membership fees paid e.g. CIPD, IEEE To find out more about TEIC visit ___.

Job Title: Quality Assurance Engineer - Precision Engineering Location: Birmingham Salary: Up to £45,000 per annum, depending on experience Shift Type: Days, Monday to Friday Hours: Monday to Thursday: 07:30 - 16:30, Friday: 07:30 - 12:30 The Company A well-established, family-run manufacturer within the luxury interiors sector is seeking a Quality Assurance Engineer to join its production and engineering teams. The business specialises in precision components and hardware, supplying designers, architects, and developers with products renowned for quality and craftsmanship. The company prides itself on a culture-first approach and long-term team growth, making this an ideal opportunity for candidates who align with its values of integrity, accountability, innovation, and excellence. The Role This hands-on role is focused on ensuring that all manufactured components meet strict quality standards, supporting continuous improvement across production, machining and assembly processes. Key Responsibilities • Inspect and test products to ensure compliance with quality standards, • Monitor production processes using SOPs and implement corrective actions where required, • Create, maintain and update quality documentation, including test plans and inspection procedures, • Conduct root cause analysis of defects and develop corrective/preventative actions, • Collaborate with production, engineering, and maintenance teams to resolve quality issues, • Train team members in quality assurance standards and procedures Essential Requirements • Strong alignment with company values, • Proficiency in CAD software, • Solid knowledge of metals, machining processes, and tooling, • Understanding of GD&T and drawing control, • Experience producing technical documentation for manufacturing teams, • Excellent problem-solving, communication, and teamwork skills Desirable • Experience with AutoDesk Vault, SAP, or similar systems, • Degree in mechanical engineering or a related technical field, • Hands-on experience with shop floor machining and manufacturing processes, • Experience in architectural hardware or luxury product manufacturing Pertemps Engineering Division We specialise in placing skilled engineers and technical professionals into manufacturing and engineering businesses across the UK. All applications are treated in the strictest confidence.

Role- HVAC Design Engineer Salary- £30,000 - £50,000 per annum (dependent on experience) Type- Permanent Location- Birmingham My client is a specialist HVAC manufacturer. They are looking for a Mechanical Design Engineer to join their team in Birmingham on a permanent basis. The Design Engineer will ideally have the following attributes: • 1 year or more of experience in a similar Design / Mechanical / Project Engineering position, • Strong organisation, client facing and project management skills, • Experience working in precision engineering or similar would be beneficial, • Experience with 2D and 3D CAD - Revit, • Knowledge of a sheet metal, injection moulded plastics, welding, fabrication, castings etc., • Degree / HNC / HND / BTEC / NVQ qualified in Mechanical Engineering or similar, • Proven ability to drive Engineering development, • Good mathematical and general engineering knowledge, • The ability to understand system requirements, • Be self-motivated with excellent attention to detail, • Have excellent communication skills both verbal and written The Project Design Engineer role will involve: • Using CAD for concept design and producing technical drawings, • Working on full lifecycle projects, • Designing and developing new products, • Liaising with manufacturing providers, • Being involved in final assembly of products, • Creating the required documentation for design as well as project reports / plans, • Updating 3D models and drawings, • Inputting parts into the MRP system creating BOMs, • Checking drawings for sign off, • Working in a small multi-disciplinary team on varied projects If you are interested in this position, please apply with an up to date CV as soon as possible.

Job Specification: Senior Principal Design Standards Engineer 1. Position Overview The Senior Principle Design Standards Engineer is a senior technical and leadership role within the engineering team, responsible for defining, maintaining, and improving design standards across mechanical and multidisciplinary projects. This role ensures that all designs—from concept through construction and operation—meet regulatory British standard requirements, additional industry standards, and best engineering practices, while supporting sustainable, low-carbon, and energy-efficient solutions. A key focus of this role is mentoring, upskilling, and training engineering staff, particularly in structural design standards and best practices, ensuring the team develops the capability to deliver high-quality, compliant, and innovative designs. The role combines technical authority with leadership, driving design excellence, standardization, and professional growth within the engineering function. 2. Key Responsibilities • Lead the development, implementation, and enforcement of design standards, technical guidelines, and best practices across mechanical and structural engineering projects., • Provide senior technical leadership from concept design through construction and operational handover, ensuring all outputs meet quality, regulatory, and safety requirements., • Conduct feasibility studies, conceptual design appraisals, and structural/stress analysis to validate engineering solutions., • Oversee technical deliverables, ensuring compliance with APQP processes (Requirements, Process Flow, DFMEA, Design for Manufacture, Control Plans) and internal quality frameworks., • Drive standardisation, modularisation, and repeatable design solutions to improve efficiency, reduce costs, and enhance manufacturability., • Continuously update and integrate manufacturing capabilities, tolerances, and process improvements into the design workflow., • Research emerging engineering practices, technologies, and materials to identify opportunities for design optimization and innovation., • Upskill and mentor engineering staff, providing structured training in structural design standards, compliance, and best practices., • Lead workshops, technical training sessions, and review forums to build team capability, improve design quality, and embed a culture of engineering excellence., • Act as a subject matter expert in design reviews, audits, and project risk assessments, providing clear, evidence-based recommendations., • Ensure all designs are sustainable, energy-efficient, and aligned with organizational objectives for low-carbon engineering solutions. 3. Scope of Work • Review, validate, and approve mechanical and structural design deliverables, including technical drawings, CAD models, and Bills of Materials (BOMs)., • Lead cross-functional technical workshops and design review sessions to align project teams on standards, compliance, and design intent., • Maintain documentation of design standards, revisions, and lessons learned for continuous process improvement., • Collaborate with manufacturing, quality, and procurement teams to ensure designs are fully feasible, cost-effective, and manufacturable., • Ensure that all design processes meet internal quality gates and applicable external standards, including ISO, ASME, BIM, ATEX & BS1090 and local regulatory requirements., • Provide technical input for APQP processes, including DFMEA, control plans, and process capability analyses., • Deliver structured training and development programs for engineers on structural design, standards compliance, and best practices. 4. Deliverables • Standardised, verified, and compliant mechanical and structural designs ready for production or construction., • Comprehensive documentation of design decisions, analysis results, and standardization efforts., • Reports summarising compliance with design standards, quality gates, and regulatory requirements., • Recommendations for continuous improvement in design methodology, tools, and standards., • Development and training plans for engineering staff, with measurable improvements in skills and technical competence., • Logs and records of lessons learned and technical guidance shared across the team. 5. Required Qualifications & Experience • Bachelor’s or Master’s degree in Mechanical Engineering; Chartered Engineer (CEng) status preferred., • Extensive experience in detailed mechanical and structural design across concept, development, and operational phases., • Proven track record of leading design teams, mentoring engineers, and implementing engineering standards., • Strong foundation in APQP processes, including DFMEA, Design for Manufacture, Control Plans, and process flow development., • Demonstrated experience in feasibility studies, structural analysis, and stress calculations., • Deep understanding of manufacturing capabilities, tolerances, and industry-standard design practices., • Proficiency in CAD software (e.g., AutoCAD 2D/3D, SolidWorks, Autodesk Inventor, CATIA, Creo, or equivalent) and associated engineering analysis tools., • Knowledge of relevant regulations, codes, and standards, with the ability to ensure compliance without limiting innovation., • Wimes and Water company specifications would be advantageous. 6. Preferred Competencies • Exceptional attention to detail, accuracy, and technical rigor., • Advanced analytical, problem-solving, and decision-making skills., • Ability to influence teams, lead standardisation, and build capability through mentoring and training., • Excellent communication and collaboration skills, capable of working across disciplines and senior stakeholders., • Strategic thinking and vision for integrating sustainability and energy efficiency into design solutions., • Organized, methodical approach with the ability to manage multiple priorities and projects simultaneously., • Commitment to fostering a culture of learning, professional growth, and engineering excellence. 7. Communication & Reporting • Provide regular technical updates and progress reports to the Engineering Director or Technical Management., • Maintain detailed records of design approvals, revisions, lessons learned, and training activities for audit and knowledge management purposes., • Lead and participate in cross-functional design reviews, workshops, and technical meetings., • Ensure all reports, presentations, and documentation adhere to company templates, branding, and quality standards. 8. Performance & Evaluation • Performance will be assessed based on the quality, compliance, and timeliness of design deliverables., • Leadership effectiveness measured by team development, adoption of standards, and process improvements., • Impact on team capability through training, mentoring, and upskilling will form a key part of evaluation., • Continuous feedback provided to ensure alignment with strategic objectives, engineering excellence, and innovation goals., • Unsatisfactory performance, failure to meet standards, or breaches of process may result in remedial action or termination.

JOB- Electronics Product Support Engineer LOCATION- Birmingham TERM- Permanent SALARY- £37,000 - £45,000 per annum dependent on relevant experience My client works within engineering and they are looking to take on a Product Support Engineer with an Electronics bias, on a permanent basis, in the Birmingham area. The Product Support Engineer will ideally have the following attributes: • NVQ/ HNC/ HND/ BTEC/Degree qualified or similar in Electrical & Electronics Engineering, • Prior electronics sector experience is essential – be able to diagnose faults, work on component level and work with schematics, • Practical soldering skills and using hand tools, • Any software knowledge would be beneficial – KiCAD or similar PCB Design CAD, • Have excellent problem solving skills, • Have excellent communication skills both verbal and written, • Be able to work well individually as well as a team, • Be proficient with using MS Office applications The Product Support Engineer role will involve: • Providing technical support to customers with regards to company products, • Being involved in product re-design when needed, • Helping with any technical issues that arise, • Offering production support across the range of products, • Schematic design using KiCAD, • Carrying out fault diagnosis, • Carrying out bespoke assembly of products when required too, • Offering support to other team member when required If you are interested in this position, please apply with an up to date CV as soon as possible, along with your availability and your salary expectation.

Electrical Design Engineer – Aerospace Sector (Inside IR35 Contract) Location: Bristol or Runcorn (Hybrid Working Model) Contract Type: Inside IR35 We’re looking for a highly skilled Electrical Design Engineer to support advanced aerospace projects. This is an Inside IR35 contract role based in either Bristol or Runcorn, with a flexible hybrid working model. Key Responsibilities: ·Electrical wiring design using Catia V5 and NX with electrical workbench capabilities. ·3D modelling and CAD installation analysis of electrical looms/harnesses. ·Draughting and cable routing design. ·Interpretation and implementation of principle drawings. ·Compilation of accurate Bills of Materials (BoMs). ·Circuit design with a focus on fusing and electrical protection strategies. Toolsets: ·Catia V5 (Electrical Workbench) ·NX (Electrical Workbench) ·Teamcenter Preferred Experience: ·Aerospace industry experience. ·Electrical design and installation support for Tempest and/or Typhoon Aircraft. ·Familiarity with electrical methods, and processes. ·Delegation of authority for ‘authorised check’ on Tempest and/or Typhoon. ·Awareness of aircraft build processes. What You’ll Bring: ·Strong technical expertise in electrical design and CAD tools. ·Proven experience in aerospace environments. ·Detail-oriented mindset and problem-solving skills. ·Ability to work collaboratively in a hybrid team setting.

Role- Design Engineer Salary- £30,000 - £50,000 per annum (dependent on experience) Type- Permanent Location- Birmingham My client is a specialist manufacturer. They are looking for a Mechanical Design Engineer to join their team in Birmingham on a permanent basis. The Design Engineer will ideally have the following attributes: • 1 year or more of experience in a similar Design / Mechanical / Project Engineering position, • Strong organisation, client facing and project management skills, • Experience working in precision engineering or similar would be beneficial, • Experience with 2D and 3D CAD, • Knowledge of a sheet metal, injection moulded plastics, welding, fabrication, castings etc., • Degree / HNC / HND / BTEC / NVQ qualified in Mechanical Engineering or similar, • Proven ability to drive Engineering development, • Good mathematical and general engineering knowledge, • The ability to understand system requirements, • Be self-motivated with excellent attention to detail, • Have excellent communication skills both verbal and written The Project Design Engineer role will involve: • Using CAD for concept design and producing technical drawings, • Working on full lifecycle projects, • Designing and developing new products, • Liaising with manufacturing providers, • Being involved in final assembly of products, • Creating the required documentation for design as well as project reports / plans, • Updating 3D models and drawings, • Inputting parts into the MRP system creating BOMs, • Checking drawings for sign off, • Working in a small multi-disciplinary team on varied projects If you are interested in this position, please apply with an up to date CV as soon as possible.

Detail Design Engineer – Marine Projects Location: UK Remote Employment Type: Permanent or Contract Are you passionate about delivering precision engineering solutions? Belcan is looking for a Detail Design Engineer with expertise in either Outfit, Structural, Piping, or Electrical design to join our Naval team. Belcan then has the role for you! Key Responsibilities Detailed Engineering Design & Documentation: • Develop and produce precise engineering drawings, 3D models, and comprehensive technical specifications using advanced CAD tools., • Perform detailed calculations, tolerance analysis, and material selection to ensure robust and compliant designs., • Lead and contribute to design reviews, ensuring strict adherence to Belcan’s Quality Management System (QMS). Required Skills & Experience • Degree in Mechanical, Electrical, or related Engineering discipline (or equivalent experience)., • Minimum 5 years’ experience in detailed design within an engineering environment, ideally in Naval., • Advanced proficiency in CAD software and strong knowledge of engineering analysis tools (e.g., FEA, tolerance stack-up)., • Strong appreciation of environmental impact and sustainability in engineering activities. About Us Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security.

Overview of role: We are seeking a highly skilled and motivated Senior Level Electrical Engineer to join our high-voltage renewables engineering team. The successful candidate will be responsible for providing high quality earthing designs and electrical substation layouts. This role is critical to ensuring the safe, reliable, and efficient operation of our clients electrical networks. As part of the wider electrical design team, produce electrical layouts for substations (including AIS up to 132kV), cable route layout drawings & sections, LV layouts, switch-room and control room layouts and earthing layouts. You will also need to identify and ensure design compliance with all relevant standards, legislation, Customer requirements, DNO standards and contract specifications throughout the project lifecycle. In addition, review tender or contract documentation and establish the primary electrical scope of works and prepare design deliverables. • Produce a wide range of substation and site layout designs, including 11–132kV AIS/GIS substations, switch rooms, control rooms, BoP/EPC layouts, and associated plan/elevation drawings., • Carry out busbar design activities, including calculations, sizing, support requirements, clamp schedules, and outline structure designs., • Lead the full lifecycle of earthing system design—soil testing, modelling (CDEGS), EPR/touch/step assessments, lightning studies, EMC considerations, material specifications, and production of all associated reports/drawings., • Produce comprehensive layout drawings for earthing, heating/lighting/ventilation, cable management, ducting/cabling, and LV AC block diagrams for switchrooms and control rooms., • Develop technical documentation including calculations, specifications (e.g., disconnectors), technical reports, design correspondence, and manage document control to QA standards., • Collaborate with internal teams, external design suppliers, procurement, and wider stakeholders; ensure designs meet G81, DNO standards, British/European standards, CDM, and project requirements., • Provide leadership in design reviews, problem‑solving, safety-by-design, programme/budget control, and resolution of project challenges., • Support team development by mentoring junior engineers, identifying training needs, and contributing to project-specific designer risk assessments. Personal Skills & Qualities • A Degree/HND/HNC in Electrical Engineering (Power Systems Electrical preferred)., • Previous experience with consultancy, contractor or utility in the Power industry., • Previous experience of technical management of a specialist design team, • Experience in the field of primary electrical design of HV / EHV AC substations and BoP projects ranging from 11kV to 132kV., • Understanding of industry HV and EHV substation installation standards and specifications., • Ability to take the initiative, demonstrate a pro-active approach to activities, problems and oneself., • Understanding of power cable installation, their requirements and installation parameters i.e. flexible or rigid arrangements, minimum bending radii etc., • Ability to manage the various inter-departmental design interfaces (i.e. structural design, planning, electrical design, CAD technicians) efficiently and effectively to deliver complex designs solutions., • Ability to both write and understand technical documents relating to all aspects of substation electrical plant & equipment., • Have an excellent understanding of risks associated with cabling works. Have working knowledge of the role of the designer under the CDM Regulations 2015., • Ability to complete a designer's risk assessment for designs being developed and produced., • Ability to prioritise workloads in a proactive and organised fashion (using software tools as necessary) to ensure key deadlines are met and reliant parties are kept informed., • The ability to use a proprietary 3D CAD package such as Revit would be desirable.

Role- Draughtsman/Design Engineer Salary- £30,000 - £50,000 per annum (dependent on experience) Type- Permanent Location- Walsall My client is a specialist manufacturer. They are looking for a Mechanical Design Engineer to join their team in Walsall on a permanent basis. The Design Engineer will ideally have the following attributes: • 1 year or more of experience in a similar Design / Mechanical / Project Engineering position, • Strong organisation, client facing and project management skills, • Experience working in automotive design or similar would be beneficial, • Experience with 2D and 3D CAD, • Knowledge of a sheet metal, injection moulded plastics, welding, fabrication, castings etc., • Degree / HNC / HND / BTEC / NVQ qualified in Mechanical Engineering or similar, • Proven ability to drive Engineering development, • Good mathematical and general engineering knowledge, • The ability to understand system requirements, • Be self-motivated with excellent attention to detail, • Have excellent communication skills both verbal and written The Project Design Engineer role will involve: • Using CAD for concept design and producing technical drawings, • Working on full lifecycle projects, • Designing and developing new products, • Liaising with manufacturing providers, • Being involved in final assembly of products, • Creating the required documentation for design as well as project reports / plans, • Updating 3D models and drawings, • Inputting parts into the MRP system creating BOMs, • Checking drawings for sign off, • Working in a small multi-disciplinary team on varied projects If you are interested in this position, please apply with an up to date CV as soon as possible.

Job Title: Renewable Design Engineer Location: Hybrid Position Type: contract About Us: We are a forward-thinking company specialising in sustainable energy solutions. Committed to reducing environmental impact, we aim to drive innovation in renewable energy projects, including BESS solar, and hybrid power systems. We are looking for a passionate Renewable Design Engineer to join our team and contribute to creating more sustainable energy solutions. Job Summary: As a Renewable Design Engineer, you will play a pivotal role in designing, developing, and implementing renewable energy systems. You will be responsible for creating innovative, efficient, and cost-effective designs for renewable energy projects. This role involves collaboration with project managers, other engineers, and stakeholders to ensure project objectives are met while maintaining high standards for sustainability, safety, and regulatory compliance. Key Responsibilities: • System Design and Development: Design and develop renewable energy systems, such as BESS, solar PV and hybrid power solutions. This includes both conceptual and detailed designs., • Feasibility Analysis: Conduct feasibility studies, including site assessments, energy yield assessments, and cost analysis for new projects., • Software and Simulation: Utilize engineering software (e.g., AutoCAD, PVSyst, or similar) to model, simulate, and optimize system performance., • Technical Documentation: Prepare engineering documents, drawings, specifications, and reports for renewable energy projects, ensuring compliance with industry standards and regulations., • Project Management Support: Work with project managers to establish project timelines, budgets, and resource requirements., • Sustainability and Compliance: Ensure that designs meet environmental, safety, and regulatory standards and contribute to achieving the highest possible sustainability standards., • Troubleshooting and Optimization: Assist in troubleshooting and optimizing the performance of existing renewable energy systems., • Collaboration: Work closely with cross-functional teams, including electrical, civil, and structural engineers, to ensure that all aspects of the design are integrated and effective Qualifications: • Bachelor’s or Master’s degree in Renewable Energy Engineering, Electrical Engineering, Mechanical Engineering, or a related field., • 5+ years of experience in renewable energy design or related field., • Proficiency in CAD software (AutoCAD, SolidWorks) and renewable energy software (e.g., PVSyst, Homer, WindPRO)., • Strong knowledge of renewable energy standards, codes, and regulations., • Excellent problem-solving skills and attention to detail., • Ability to work both independently and in a team environment., • Strong written and verbal communication skills. Preferred Qualifications: • Professional Engineer (PE) certification is a plus., • Experience with energy storage systems and hybrid energy solutions., • Familiarity with power electronics and control systems related to renewable energy systems.

Position: Industrial Refrigeration Design Engineer Contract: Permanent, Full Time Location: Remote - Based anywhere in the UK (Head office is based in Leicestershire) Salary: circa £75K plus company car or cash allowance & benefits & performance bonus Industry: Industrial Cooling & Refrigeration PRS Engineering has engaged with a key client and a leading Industrial Cooling & Refrigeration specialist operating and delivering high value projects across the UK with headquarters based in Leicestershire. Due to team expansion and winning new projects, we are seeking an Industrial Design Engineer with a background in Ammonia, CO2 Systems, Industrial Cooling Technologies &/or Industrial Refrigeration to support business requirements and oversee key projects. This is a remote working role with occasional attendance at the Leicester office will be required as will site visits and site surveys. Job Purpose To design and propose industrial and commercial project to customer and legislative specific requirements. To create a design from an initial brief and/or drawing to specific customer specifications, whilst adhering to the latest company and industry standards. Principal Responsibilities: Service: • Carry out site surveys where required, • Generate and update enquiry bank, • Attend customer scoping and design meetings where required, • Produce initial outline design/scope, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • Produce detailed design, consisting of but not limited to: Cold room heat load calculation, cabinet heat load calculations, produce engineering sheets and pipework isometric drawings, equipment selections and pipe work sizing, • Produce supplier/sub-contractor enquiries for quotations, • Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing if required, • Raise Contract Approval Form to enable project to be booked on system, • Order any long lead time items to ensure project meets program, • Mark up drawings and issue to CAD department to produce, • Attend site at least once during project installation period, to carry out design review, • Assist PM with project shutdowns, • Maintain excellent service levels at all times, ensuring a “first Class” service to all customers, • Take on projects as and when required and see them through to successful completion Financial: • Produce estimates in line with customer budgets and to agreed company margins, • Produce formal scope of works and formal quotations, • Assist CM with project variation design and costs, • All contracts over £500k to have contract/design review with senior member of staff, • To prepare quotations (once the design is complete) to meet both the customer budgetary demands and the company’s target margins., • To identify means of generating extra revenue through new initiatives (forward thinking) People: • One to one session with line manager once a quarter, • To treat other colleagues, managers, customers and other stakeholders equally and with courtesy and respect at all times, • Where possible - to assist others with tasks that may be outside of the scope of your role, • To assist with coaching other colleagues/managers, for cross training purposed in your area of expertise Compliance: • Ensure that all relevant company and legislative policies and best practices are adhered to and maintained at all times, • Inform the relevant Manager of non-conformances and ensure that corrective action is taken, • Ensure compliance with all procedures throughout within your remit, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • To ensure Refrigeration industry codes and standards are upheld, • To comply with environmental policies and putting forward new ideas for improving environmental efficiencies., • Adhere to Group H&S procedures with due regard for business constraints and efficiency Person Specification: • Ability to be customer focused, • Ability to demonstrate a high level of financial awareness, • Ability to adhere to design standards, • Ability to adhere to company vision and values, • Have excellent team working skills and ability to use own initiative, • Be able to work to stringent deadlines, • Willingness to share knowledge and best practice models, • Willingness to develop own skills and experience through learning interventions, • Have a flexible approach to work, • Be able to communicate to the highest level, • Be able to adapt positively to change, • Ability to strive to meet objectives, • Ability to work within a diverse and fast paced environment, • Have knowledge of Microsoft packages and in house systems (if required), • A background in industrial / commercial environments would be advantageous., • Full, clean, UK driving license

Position: Refrigeration Design Engineer Contract: Permanent, Full Time Location: Remote - Based anywhere in the UK (Head office is based in Leicestershire) Salary: circa £75K plus company car or cash allowance & benefits & performance bonus Industry: Industrial Cooling & Refrigeration PRS Engineering has engaged with a key client and a leading Industrial Cooling & Refrigeration specialist operating and delivering high value projects across the UK with headquarters based in Leicestershire. Due to team expansion and winning new projects, we are seeking a Design Engineer with a background in CO2 Systems, Industrial Cooling Technologies &/or Industrial Refrigeration to support business requirements and oversee key projects. This is a remote working role with occasional attendance at the Leicester office will be required as will site visits and site surveys. Job Purpose • To design and propose light industrial and commercial systems., • Detailing costs and designs to customers while meeting legislative and customer specific requirements., • To create a design from an initial brief and/or drawing, whilst adhering to the latest company and industry standards., • Produce detailed design, consisting of but not limited to: Cold room heat load calculation, cabinet heat load calculations, produce engineering sheets and pipework isometric drawings, equipment selections and pipe work sizing, • Knowledge of CO2 systems essential, Glycol/Chiller experience desirable but not essential., • Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing if required., • Take on projects as and when required and see them through to successful completion, • Day to day functions as requested and required by your line manager, • 2D & 3D CAD Skills (no particular preference on software tools)

D CAD Engineer / Estimator Full-Time | Permanent | £30,000 per annum We are currently seeking a 2D CAD Engineer / Estimator to join a busy and expanding office-based engineering team. Key Responsibilities Reading and interpreting engineering drawings Producing profile drawings using 2D Auto

Senior Technical CAD / Product Development Engineer. This is an excellent opportunity to join an organisation known for its commitment to precision engineering, high-quality product development, and continuous improvement. Key Responsibilities as a Senior Product Development Engineer:.

We are seeking a JUNIOR CAD ENGINEER. Were seeking a Junior Technical CAD / Product Development Engineer to join our growing design and development team. Design and develop products using CAD (AutoDesk Inventor).

The business is seeking a Graduate Electrical Design Engineer who is looking to build strong foundations in electrical design, CAD systems, and engineering change control within a structured and supportive technical environment. Graduate Electrical Design Engineer desi. Graduate Electrical Design E

Proven experience in a CAD Engineer or CAD Technician role. This role would suit a practical, detail-focused CAD Engineer who enjoys working closely with manufacturing and production teams in a fast-paced environment. Producing and modifying CAD drawings for manufacturing.

Our client, a well-established, leading shopfitting and bespoke joinery company, is looking for a skilled CAD Engineer/Technician to join their design team.You'll create detailed technical drawings, 3D models, and fabrication drawings for high-quality interior fit-outs and bespoke joinery projects.W

Unique high end Quality Products.We are seeking a SENIOR CAD DESIGN ENGINEER.We are a busy, thriving manufacturing facility in the Birmingham area, a market leader with a reputation for quality and innovation.Were seeking a Senior CAD Design Engineer to join our growing design and development team.Y

Junior CAD Engineer£26,000 - £28,000 + Excellent Company BenefitsBirminghamDo you have CAD experience, looking to join an expanding, specialist engineering company where you will be able to develop your skill with training and progress your career into more senior roles?This is an exciting opportu

Draughtsperson / CAD Engineer (Setting Out) Salary: £30,000 – £40,000 DOE ⏰ Hours: 44 hours per week Start Time: 06:30 – 07:30 Location: Birmingham Contract: Full-time | Permanent ✔ Onsite parking | ✔ Life insurance | ✔ Statutory pension |

To be considered for this role as an Electrical Design Engineer you will have: * Proven experience in electrical design for automation and control systems. Proficiency in EPLAN, AutoCAD Electrical, or similar electrical CAD software. A solid understanding of LV electrical systems, control panels,

Key Responsibilities as a Senior Product Development Engineer: ·Design and develop products using CAD software (e. Essential Requirements For a Senior Product Development Engineer: ·Proficiency in CAD software. Senior Product Development Engineer Location: Birmingham Working Hours:

This MEP CAD / Revit Engineer opportunity is for a credible MEP Building Services Consultancy that specialises in high end residential projects (Making up approximately 70% of their work) alongside commercial work, including healthcare (Which takes up around 30%). Experience in an MEP CAD / Revit E

The business is seeking a Graduate Electrical Design Engineer who is looking to build strong foundations in electrical design, CAD systems, and engineering change control within a structured and supportive technical environment. Graduate Electrical Design Engineer | Salary circa of £35,000+ | Flexi

A well-established manufacturer in Birmingham seeks a Quality Assurance Engineer to ensure all components meet strict quality standards. Candidates should have a degree in mechanical engineering, proficiency in CAD software, and strong problem-solving skills.

Job Description 2D CAD Engineer / EstimatorFull-Time | Permanent | £30,000 per annumWe are currently seeking a 2D CAD Engineer / Estimator to join a busy and expanding office-based engineering team. Key Responsibilities - Reading and interpreting engineering drawings - Producing profile drawings

Key Responsibilities - Produce SolidWorks and AutoCAD fabrication drawings and general arrangement drawings for client approval - Compile production and manufacturing instructions, including Bills of Materials (BOMs) - Work in accordance with the Technical Department processes and Quality Managemen

A precision engineering organization located in Birmingham is seeking a Senior Product Development Engineer. In this role, you will design and develop products using CAD software and ensure that your designs are practical and optimized for manufacture. Candidates must have a degree in mechanical eng

Draughtsperson / CAD Engineer (Setting Out) Salary: £30,000 - £40,000 DOE • Hours: 44 hours per week • Start Time: 06:30 - 07:30 • Location: Birmingham • Contract: Full-time | Permanent • Onsite parking • Life insurance • Statutory pension • 26 days holiday. This is not a desk-only

A respected manufacturing company in Birmingham is seeking a Draughtsperson / CAD Engineer for a full-time role.The candidate will produce high-quality 2D and 3D drawings, translating architectural concepts into production-ready documents.With a salary range of £30,000 to £40,000, this position of

This role involves creating substation layouts, developing technical specifications, and ensuring project documentation meets standards.

A leading engineering firm in Birmingham is seeking a skilled CAD Engineer to create technical drawings and 3D models. The successful candidate will work closely with design and engineering teams, ensuring compliance with industry standards and collaborating effectively across projects. Join a dynam

As a Software Development Engineer at Autodesk Research, you will work side-by-side with world-class researchers and engineers to build new ML-powered product features that help our customers imagine, design, and make a better world. You are a software engineer who is passionate about solving proble

A growing engineering firm in Birmingham is looking for a Graduate Electrical Design Engineer to support the design and development of electrical harnesses and systems.

The ideal candidate should have experience with CAD/CAM principles and work well both independently and in a team.

The Project Manager / Civil Engineer will work with other engineers and CAD technicians on various civil, solid waste, and environmental related projects in our Birmingham, AL office.The projects are challenging and provide unique design opportunities.You will be responsible for designing solid wast

In this remote role, you will be responsible for designing and estimating projects, conducting site visits, and liaising with clients and engineers. The ideal candidate will have experience in the fire and security industry, hold an FIA Design Qualification, and be proficient in Auto CAD. A leading

This is a remote position offering 25 days of holidays and a car or car allowance. A recruitment agency is seeking a Fire & Security Design Engineer in Birmingham with a competitive salary range of £40,000 - £50,000. The role involves carrying out designs and estimates, managing client relationshi

A leading European business group is seeking a Lift Design Engineer in Birmingham to manage all design aspects of lift installations. Candidates should have relevant engineering qualifications, industry experience, and be proficient in CAD software.

Account Information: We've partnered exclusively with a rapidly growing dental company that's set to revolutionize the industry by integrating cutting-edge digital technologies, including CAD, CAM machines, and exploring the potential of AI. A well-established provider of dental equipment and solutions, known for reliability, innovation, and a strong customer focus. Its tailored approach supports the unique needs of dental professionals, enhancing efficiency and improving patient care. If you're an engineer ready to take your career to the next level, this opportunity could be exactly what you've been waiting for. Role Overview: As a Field Service Engineer for this high end Dental Equipment distributor, you will work in their growing team to help them service, repair and maintain a range of Dental Imaging equipment as well as dental chairs, compressors and other products. The role is covering the South WestTerritory with very few (1-2) overnight stays a month, no weekend work and a very competitive benefits package involved with this position. Key Responsibilities: Carrying out pre planned maintenance, servicing, installations and repairs on a variety of equipment from CAD, CAM and X-rays in dental practices mainly. Also servicing, repairing and maintaining equipment ranging from dental chairs, suction pumps and autoclaves. Traveling to and from customer sites that will be localised to your location. Working as a team with 4 other service engineers to conduct a high-quality service to support service retention. Person Specification: A passionate engineer with hands-on experience, eager to grow within our south east team. Someone who thrives on learning, values autonomy, and is a proactive problem solver. A self-starter with a track record of high first-time fix rates. A professional eager to shape their future career, influence company direction, and share valuable insights. Package: Bonus - £500 a quarter Pension (Employer 5%, Employee 3%) Company Van (Diesel) 25 days annual leave + BH 40-hour week + regional travel Wellhub gym membership with option to add family members for a small fee TPBN1_UKTJ

A leading Scientific and Engineering company in Warrington are looking for a Test Engineer to work on a range of bespoke electro-mechanical products . This is a full lifecycle role with the client expecting someone to get involved in both R&D and customer projects. The chosen Test Engineer will be actively involved in mechanical assembly, integration, and prototyping, test & validation. The ideal candidate should be confident in reading engineering drawings & ensuring their work is completed to the highest quality standards. The company work in a variety of sectors including the space industry. The projects are therefore both varied and complex in nature so perfect for an experienced Assembly & Test Engineer who enjoys a challenge! Test Engineer requirements: Degree level or HND/C in Mechanical Engineering (or similar) Precision assembly& NDT experience Test & documentation (ISO 9001, AS9100) Comfortable reading CAD/ Engineering drawings (GD&T) Space / Aerospace experience (highly beneficial) Benefits of this Test Engineer position: Flexible working system Excellent pension (8% matched) Health care Life assurance 25 holidays + banks Additional leave purchasing scheme If you have the required skills for Test Engineer position or would like to learn more then please get in touch ASAP with an up-to-date copy of your CV. You can also call Morgan Hallworth on 0773 3479 502 for a confidential chat. If this role isnt of interest, but you know of someone who could be, Chroma Recruitment operates a referral scheme. Chroma Recruitment is acting as an employment business with regards to this position. TPBN1_UKTJ

A superb opportunity for either an experienced Applications or Proposals Engineer, or a qualified Mechanical Engineer with CAD or technical drawing skills who wants to get into a client facing Applications / Technical Sales Support Engineer role with a British manufacturer of product, materials and ingredients handling machinery and systems, supplying the food and other processing markets. BASIC SALARY: up to £45,000 BENEFITS: · 8% Pension · DIS LOCATION: Factory based in Staffordshire so ideally you will live within an hour of Stoke-on-Trent COMMUTABLE LOCATIONS: Stoke-on-Trent, Birmingham, Manchester, Derby, Crewe, Stafford, Newcastle-under-Lyme JOB DESCRIPTION: Applications Engineer, Proposals Engineer - handling machinery & systems, capital equipment This is an Applications / Proposals Engineer role where you will be working closely with the senior sales team and the design engineering team internally and clients and suppliers externally. The role will be multi faceted encompassing Applications Engineering and technical sales support to the sales team and clients. You will be using CAD to produce layouts and quotes and doing some project management post sale. You will also be involved in product trials. PERSON SPECIFICATION: Applications Engineer, Proposals Engineer - handling machinery & systems, capital equipment · You WILL be a qualified Mechanical Engineer with CAD and / technical drawing skills and experience. · You WILL ideally have some applications or proposals engineering experience working for an industrial, engineering or manufacturing company, ideally supplying capital equipment to the food industry. · You will have engineering initiative and creativity, and be ambitious for a career move. THE COMPANY: A well established British manufacturer of standard and bespoke product, materials and ingredients handling machinery and systems supplied to the food and other processing markets. There is good management culture and they have invested heavily in technology to support the team and clients. PROSPECTS: There is a genuine chance to progress to into either a more senior engineering role or into a field sales role if successful. INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18380, Wallace Hind Selection TPBN1_UKTJ

CAD Technician (Highways/ Transport) Birmingham £30,000 - £35,000 • Salary Progression + Training + Development + Benefits + Bi-annual Bonuses Are you a CAD Technician with experience in highways design, looking to join a market-leading consultancy offering a fully integrated approach to transport planning and infrastructure delivery offering progression opportunities and training to enhance your technical skills? Do you want the opportunity to work on a diverse range of commercial and residential projects, with clear progression routes, ongoing training, and the support of an experienced and collaborative team? This company is a well-established transport planning consultancy operating across the UK, providing S278/38 highways design, drainage, environmental planning, implementation, and operation to a both residential and commercial clients. Now expanding their company to a new Birmingham based office, you will play a key role in the development of the new team. On offer is an excellent opportunity to become a key part of a successful highways and infrastructure team. You will assist in the delivery of highway schemes from feasibility through to construction, producing high-quality designs and drawings while working closely with senior engineers, local authorities, and external stakeholders. This company offers a supportive environment with competitive benefits, bonuses, and genuine career development opportunities with ongoing training and support. This role would suit a CAD Technician with experience in highways design, looking to join a market-leading transport planning consultancy. The role: * Assisting with the design and implementation of highway schemes for public and private sector clients * Producing drawings using AutoCAD and supporting scheme development through feasibility, design, and construction stages * Monday - Friday 9-5:30pm The person: * CAD Technician * Experience using AutoCAD and Civils3D * Good understanding of highways design standards and processes * Commutable to Birmingham Office Reference Number: BBBH23301 Keywords: CAD, CAD Technician, AutoCAD, Design, Draughtsperson, Engineering, , Transport Assessments, Travel Plans, Consultancy, Engineer, Highways, Birmingham, Dudley, Walsall, Wolverhampton, Tamworth, Coventry, Bromsgrove, Kidderminster, Redditch. TPBN1_UKTJ

ORONAs activities are focused on the design, manufacture, installation, maintenance, and modernisation of lifts, escalators, moving ramps and walkways. Operating in 100 countries , we have 330,000 lifts worldwide using our technology. With 2 manufacturing plants Orona is Number 1 in Europe in terms of complete lift production capacity. Summary We are looking for an Senior Design Engineer within the lift industry experience.Ideally based anywhere in the UK (except Northern Ireland), however it will require regular travel to meet with the team based in Sunbury . A company vehicle may be provided. You will be responsible for, all design aspects of the lift installation including drawing production, customer liaison, installation teams liaison, design standards and personally delivers final Builders Working drawings. Provides responsive internal and on site design support and training. Other duties include: Produces Builders Works, Engineering, Lift finishes drawings and sketches in accordance with company standards, best practise, legislation, H&S guidelines and the Lifts Regulations. Understands, interprets and integrates Architectural and technical building drawings and information, and incorporates within a co-ordinated working design. Produces designs with an awareness of timescales and deadlines in respect of customer requirements. Records design process on company software systems Assists in producing Operating and Maintenance Manuals, 'as fitted' information and regularly checks project completion schedules to ensure the O&M manuals are issued to customers in a timely manner in accordance with company practises. Has responsibility for ensuring the customer fully understands the builders work drawings and prepares the site to agreed drawings and attendances. Checks the site for compliance and advises any anomalies/proposals in writing to the customer. Completes site surveys to ensure site is prepared as per agreed drawings and schedules and advises customer on areas of non-compliance. Attends design meetings where required to liaise with the customer, Architects, project designers. Responsible for attaining customer approval of builders work drawings and lift finishes. Benefits Competitive salary 25 days holiday (rising to 30 days with service) + 8 days Bank Hols Pension (Company contributions rising with service) Life Assurance Medical Cash Back Plan Enhanced Family Friendly Leave GP24/7 Employee Assistance Program Eye care vouchers Long Service Awards Recruitment referral fee Training and Development opportunities Requirements An accredited university degree Must have previous experience in the Lift Industry CAD - Should be conversant in Auto-Cad or similar design software. Technical Drawings • Fully conversant with engineering drawings and able to explain them to others. Problem Solving able to identify problems, break them down into smaller elements, pin point possible solutions, prioritise these different elements and construct an action plan for tackling the problem. Innovative shows good judgement about new ideas that will work and able to put them into practice. Stand Alone has the self confidence to be able to work with minimum supervision and be trusted to deliver work that is timely and accurate, right 1st time. Communication • good communicator both orally and in writing, providing clear and relevant information to others in a way that they can understand exactly the true message that is being sent. Must also be able to select the right medium to use. TPBN1_UKTJ

Company Overview: We are currently partnering with a well-established MEP consultancy in Birmingham that takes an interdependent approach to project delivery. By working closely with design and construction teams, they ensure projects are completed on time, within budget, and exceed Client expectations. With a large portion of business stemming from repeat clients, the company is known for its strong relationships and high level of customer satisfaction. A collaborative culture encourages staff involvement across all projects, ensuring knowledge is shared and engineers are well-equipped to manage projects from start to finish. Committed to innovation, the company provides flexible and comprehensive MEP services, leveraging the latest technologies to deliver tailored, optimal solutions for projects ranging from £5k to £20m. The Role: Electrical Design Engineer Were looking for an Electrical Design Engineer to join a busy and growing engineering consultancy. Youll be part of a close-knit team working on a variety of projects across sectors including education, retail, healthcare, and commercial. The team fosters a friendly and supportive work environment where youll feel at home from day one. As an Electrical Design Engineer, you will work closely with directors and senior engineers in the Building Services department to continue your professional development. You will be involved in the full life cycle of projects, from design to delivery, and play an essential role in ensuring the success of MEP systems. Key Responsibilities: Assist senior design engineers with the preparation of outline design schemes for MEP systems. Monitor project progress by visiting sites during the construction phase. Collaborate with the design team to deliver detailed electrical designs across a range of projects. Check documents and perform detailed electrical calculations for MEP projects. Stay up-to-date with the latest building regulations and technical standards. Attend project group and technical meetings. Advise clients and architects on energy use, conservation, and sustainability to minimize environmental impact and reduce the carbon footprint. Contribute to design briefs and sketch designs within client and engineering manager specifications. Work within the firms QA and operational procedures to ensure quality outcomes. Take responsibility for technical and financial decisions, including time management, system selection, and project development. Support and mentor trainees and junior engineers. Liaise with mechanical engineers and other disciplines to ensure integrated MEP designs. Key Skills & Competencies: Strong understanding of electrical systems, energy assessments, and their design parameters. Proficiency in CAD and power design software (e.g., Amtech) and lighting design software (e.g., Relux or Dialux). BIM awareness. Ability to manage engineering design functions, including project management, design preparation, and costing. Experience in services coordination across all disciplines to produce buildable MEP designs. Competence in applying engineering principles, Standards, Codes of Practice, and Regulations. Ability to liaise with Statutory Authorities for new building connections and upgrades. Conduct surveys of buildings and prepare electrical reports, assessing compliance with regulations and energy performance. TPBN1_UKTJ

Our OEM Client based in Gaydon, is searching for a Human Factors Engineer to join their team on an Inside IR35 contract. Umbrella Pay Rate: £33.64 per hour. Duties: As modern vehicles evolve, our client's customers are experiencing and interacting with vehicles in new and innovative ways. We are looking for an enthusiastic individual to join our Human Factors Ergonomics team to deliver our customer requirements for our future vehicles. This role is ideally suited to a skilled individual with a background in Human Factors, Ergonomics, Anthropometrics, Product Design or Design Engineering. Additional Duties: Lead development of Human Factors requirements, in order to deliver the best customer experience. This will include collaboration with key stakeholders around the business including Engineering, Design, Programme, Commercial and many more Lead Human Factors input into the development of our future vehicles and brands - evoking empathy for the impact to the Human Factors Attribute of vehicle development decisions using innovative and visual communication methods. Lead the timely completion of Human Factors assessments &/or gateway testing, to aid in issue resolution. Support collaboration with colleagues to resolve ergonomic related issues on our vehicles using customer data and Human Factors science to drive discussions. Analyse customer feedback relating to ergonomics and use it to support requirement development and issue resolution. Essential Skills Required: Proven ability to work in a demanding environment and combine interpersonal skills with technical decision-making. Ability to analyse technical data and customer feedback to support programme discussions & Ergonomics requirement development. A knowledge of human physiology, anatomy or anthropometrics. A good communicator with the ability to explain complex ideas to others. Desirable Skills Requested: CAD experience (e.g. CATIA / 3D Experience). Familiarity with Agile Methodology implementation and using JIRA Knowledge of whole vehicle engineering and working with teams across an organisation. Resilient and enthusiastic, an individual able to deliver results under pressure. Education Required: Experience in Human Factors, Ergonomics, Anthropometrics, User-Centred Design, Product Design, User Experience Design or a related field, educated to degree level. TPBN1_UKTJ