Trabajos cad engineer en Newcastle Upon TyneCrear alertas

Rewards and Benefits on Offer; • Immediate start available, • Competitive basic salary, • Dayshift, • Free on-site parking MTrec Technical are proudly representing our prestigious manufacturing client, based just North of Newcastle by recruiting a permanent Manufacturing Engineer. You will be joining an industry leading company, with an excellent team-based culture and fantastic long-term career prospects . If you have a background within Manufacturing. Production, Continuous Improvement or similar, apply now for an immediate response The Job You’ll Do; • Take responsibility for the manufacturing processes end-to-end, • Drive improvements in cycle time, throughput, and yield, • Standardise processes to minimise variation and reduce reliance on individual operators, • Be actively present on the shop floor during issues, rather than managing remotely, • Lead structured root cause analysis using methods such as 8D, 5 Whys, and fault finding, • Resolve recurring issues including press stoppages, induction instability, tooling failures, and scrap trends, • Deliver measurable results, including improvements in OEE, and reductions in downtime and scrap, • Implement Lean methodologies effectively, including 5S, Standard Work, and Visual Management, • Challenge and correct ineffective or poor practices, • Develop and maintain SOPs, work instructions, and process flow documentation, • Put controls in place to prevent repeat failures, • Lead new product introduction from concept through to full production, • Define processes, tooling requirements, and trial plans, • Ensure successful right-first-time product launches, • Support validation activities through capability studies and formal sign-offs, • Monitor and respond to key metrics such as OEE, scrap, and downtime, • Contribute to tooling and die design improvements, • Collaborate with the Toolroom to eliminate recurring failures and quality issues, • HNC or above in Mechanical / Manufacturing Engineering or similar, • Experience in heavy engineering, automotive or similar, • Strong background in process improvement within production environments, • Strong Experience with CAD (Fusion 360 or similar), • Able to understand engineering drawings & tolerances, • Experience with PFMEA, Control Plans, SPC and Structured problem solving (8D, 5 Why), • Self-driven and able to work on own initiative, • Comfortable in a fast-paced, hands-on environment, • Willing to challenge poor standards, • Strong shop floor presence — visible and accountable

Graduate CAD Technician (Highway Design) £30,000 - £40,000 + Private Medical / Dental + Tusker Car Scheme + Profit Share + Individual Bonus + Training + Progression Newcastle Are you a recent graduate, who is proficient in AutoCAD, looking to work for a well-established, market-leading consultancy offering comprehensive solutions for all aspects of transport planning? On offer is a job at a rapidly growing, employee-owned transport planning and highway design consultancy that has been operating for over 20 years. At least 1 year of experience with AutoCAD and some highway design experience is required (this can be through a degree placement). Training will be provided on Civil 3D and Micro Drainage software. You will work in the highway design sector across various projects. Responsibilities will include detailed highway layouts, preparing detailed drawings in line with MCHW series requirements, working with key highways standards and supporting the road safety audit process. This role would suit a recent engineering graduate with experience in AutoCAD and highway design knowledge who is eager to develop technical skills and progress within a growing transport planning consultancy. The Role • Designing and implementing highway design solutions, • Develop relationships with key stakeholders, • Complete tasks to budget, • Monday to Friday, 9 - 4:30 The Person • AutoCAD experience, • Highway design experience, • Engineering degree or equivalent If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24793 Keywords: AutoCAD, Civil 3D, Highway Design, Micro Drainage, Transport Planning, Graduate, Engineer, Newcastle We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Company Description As a 'one-stop' solution, our consultancy offers comprehensive expertise in transport planning. With established offices in Gateshead, Tyne & Wear, Fleet, Hampshire, and our new Midlands office in Birmingham, we serve a diverse range of public and private sector clients, including nationally recognised commercial developers. Our success is evidenced by the numerous successful outcomes we have delivered on projects throughout the UK. We offer comprehensive solutions for all aspects of development transport planning, S278/38 highways scheme design, drainage, environmental planning, implementation, and operation. Role Description This is a full-time on-site role for a Highways Design Engineer, based in our Gateshead office. Responsibilities include designing highways and roadway infrastructure, conducting drainage design, and supporting transportation planning activities. The role involves creating detailed engineering designs, assessing traffic impacts, and collaborating within multidisciplinary teams to deliver tailored solutions aligned with project goals and in accordance with MCHW, DMRB and/or local design guidance. Essential Requirements and Experience • Experience of working on Section 278 and Section 38 highway design projects, • Strong technical skills and experience in a range of highway design environments, • Experience of project management of design projects and delivery to programme and budget, • Display sound independent judgment, • Robust working knowledge of highways Technical documents within the DMRB, • To be able to work with or advise key clients on technical issues in the highway structures sector at a senior level, • Demonstrate a working knowledge of the Civils 3D CAD package., • Good understanding of local regulations and compliance requirements, • Strong problem-solving and analytical skills, • Ability to work collaboratively in a team environment At Milestone, we believe that our team members are our greatest asset, and we strive to provide a supportive, collaborative, and inclusive work environment. We are committed to investing in our employees' development, providing ongoing training and mentoring to help them reach their full potential. Our culture is one of innovation, creativity, and excellence, and we are always looking for talented individuals who share our passion for delivering exceptional results. So, if you're looking for a new challenge consider joining our team at Milestone and take the first step towards a bright future. Benefits • Additional leave, • Company events, • Company pension, • Cycle to work scheme, • Life assurance, • Private dental insurance, • Private medical insurance, • Profit share bonus, • Annual bonus

Technology Design Engineer Amey are a leading provider of full life-cycle engineering, operations and decarbonisation solutions, for transport infrastructure and complex facilities. Working for us, you’ll be delivering sustainable infrastructure solutions that enhance life and protect our shared future Our people are driven by a set of strong values, based on safety, insight and collaboration. The Opportunity We have a fantastic opportunity for a permanent Technology Design Engineer to join our Consulting Energy, Lighting & Technology (ELT) Practice. This is a hybrid opportunity based in our newly opened office in Newcastle, so we welcome applications from across the region. Amey Consulting are a design partner to National Highways in the delivery of the largest and most comprehensive renewals programme they have ever launched. Through the Scheme Delivery Framework (SDF) we are supporting National Highways in the design and delivery of its significant investment in operational roadside technology renewals over the remainder of the current RIS2 and future RIS3 periods. We are also providers on National Highways frameworks, including SPaTS2, OTCF and ITCF with growing consulting opportunities in the technology arena. The role Our Technology Design Engineers play an important part within the ELT Practice and alongside our client, National Highways. As an Technology Design Engineer you will provide effective support and assistance to your Technology Team leads on a variety of operational roadside technology schemes and help delivery of these. Responsibilities include: • To work in a team, producing technically sound engineering solutions, • Preparation of designs, calculations, drawings and documentation as part of the production of scheme deliverables that satisfy the criteria of quality, cost and programme, • Identify design risk and hazards and communicating those with Principal Contractors via scheme safety risk management documentation, • Overseeing the actions of more junior members of staff undertaking similar tasks, where appropriate, and taking responsibility for their actions, • Liaising with client and supplier representatives at peer level, attending progress meetings, and responding to queries, • Contributing to the preparation of bids and general working winning function, • Drive effective health and safety practices within the team What you will bring to us: • Developed experience and expertise within roadside technology field, probably gained in an Assistant Engineer role or equivalent, • Knowledge of roadside technology design processes and procedures or on-road operational and maintenance experience of roadside technology, • An ability to produce the production of technically sound engineering solutions, complying with all relevant technical standards and client requirements, • Experience in undertaking project related tasks associated with health, safety and welfare, e.g. Construction (Design and Management) Regulations, • Working knowledge and experience of CAD design tools, • A can-do attitude and desire to progress and learn from peers and senior team members, • Bachelors degree in an appropriate subject or demonstrable equivalent further learning, • A demonstrable commitment to their plan of actions and key dates leading to successful completion of either the professional review or end point assessment, resulting in the award of Incorporated or Chartered status or an equivalent professional licence What we can offer you: At Amey, we recognise that our biggest asset is our people. That’s why when you join us, we offer flexibility, career development, a choice of benefits and support that help you through all life’s ups and downs. It’s the reason why Investors in People put us among the top 1% of employers. Career Development – Our dedicated progression framework identifies your career pathway and progress within the organisation, and with dedicated mentoring and support on hand to ensure you hit your career milestones. We’re huge advocates for professional development and offer a recognition bonus for those achieving professional qualifications. Work-life Balance – Work-life balance and flexibility are key for our success. We empower our people to make choices that are right for them, with hybrid, part-time and flexible work patterns. And with a network of offices across the UK, we’re open to discussing working options that suit you. Wellbeing – Health cash plan, 24 GP, support and assistance programmes, wellbeing ambassadors and Wellbeing Wednesday, dental vouchers EDI- At Amey we celebrate our people and all that they are. This is reflected in our Affinity Group networks, providing a community of support and connection, a safe space to share experiences, learn from one another and generate ideas – Women @ Amey, NeuroDiversity, Armed Forces, Multicultural Network, Pride, Diversability and Parents & Carers. Social Value – You’ll get 2 Community Involvement Days each year to volunteer for a charity of your choice and further opportunities to support fundraising initiatives. Plus a range of other great perks and benefits including: • Pension – Generous Pension scheme which we will contribute to, • Holidays - Minimum 24 days holiday + Bank Holidays, • Choices - Our flexible benefits scheme is tailored by you, including buying additional annual leave, cycle2work scheme, charity giving and gym membership, • Save with Amey - Our online voucher portal gives you access to thousands of discounts from leading retailers to help you save on shopping, days out, or nights in. Your Career at Amey Consulting At Amey Consulting, we value collective expertise, but also the spark one person can bring. As one of us, you can really be yourself, because your individuality is an asset. You’ll be stretched, but always supported. Well recognise your hard work and look after your well-being too. You’ll be empowered to play your part and achieve, encouraged to fulfil your own ambition as well as the shared one. Application Guidance Amey is committed to Inclusion and Diversity. We welcome applications from all suitably qualified candidates, regardless of their race, gender, disability, religion/belief, sexual orientation or age. We are also committed to offering applicants with a disability an interview, if they meet the minimum requirements for the role. Please contact our recruitment team at to discuss any access needs, reasonable adjustments or additional application support that may be required at any point during the recruitment process.

The Opportunity\n\nAre you a Mechanical Engineer with a couple of years under your belt, looking to take the next step in your career? Whether you’ve spent the last two years behind a desk in a Design Consultancy or on-site in Contracting, Branta are looking for a versatile engineer to join a busy Project Delivery team.\n\nThis role offers the perfect "bridge" for an engineer who wants to move away from pure CAD work or pure site-supervision and into a full-lifecycle Project Engineering role. You will be given the autonomy to manage your own smaller schemes while receiving direct mentorship on large-scale infrastructure projects.\n\nKey Accountabilities\n\n * \n\n Project Ownership: Manage mechanical building services solutions for office refurbishments, laboratory fit-outs, and infrastructure upgrades from initial concept to final handover.\n\n * \n\n Design & Specification: Prepare mechanical designs, specifications, and tender documents. (Design candidates will apply their technical skills; Contracting candidates will learn the formal design process).\n\n * \n\n Sustainability: Drive energy-efficient solutions and support carbon-reduction goals across the portfolio.\n\n * \n\n Financial Awareness: Assist in producing feasibility reports, tracking project budgets, and ensuring cost-effective delivery.\n\n * \n\n Compliance & Safety: Apply CDM 2015 regulations and CIBSE guidelines to all work, ensuring high standards of Health & Safety.\n\n * \n\n Contractor Management: Monitor the performance of external contractors on-site to ensure work meets design specifications and quality standards.\n\n * \n\n Commissioning: Participate in the commissioning of mechanical systems to ensure they meet operational requirements.\n\nThe Person\n\nExperience & Skills\n\n * \n\n The Ŗ-Year Milestone": You will likely have around 2 years of post-qualification experience in either a building services design office or a mechanical contracting environment.\n\n * \n\n Technical Knowledge: A solid grasp of HVAC, pipework, and thermal dynamics. Familiarity with Building Regulations and CIBSE standards.\n\n * \n\n Software Skills: Proficient in AutoCAD. Exposure to MEPWorx, Hevacomp, or Revit is a significant advantage.\n\n * \n\n Problem Solving: A practical approach to engineering challenges—you can identify an issue and work methodically toward a solution.\n\n * \n\n Communication: Ability to write clear technical reports and communicate effectively with both site trades and senior stakeholders.\n\nAttributes\n\n * \n\n Inquisitive: A strong desire to understand how buildings work and how to optimize them for energy efficiency.\n\n * \n\n Adaptable: Comfortable moving between a professional office environment and active construction sites.\n\n * \n\n Collaborative: A team player who is happy to support senior engineers while also taking the initiative on individual tasks.\n\nQualifications\n\n * \n\n Essential: A Degree or HND/Level 4+ qualification in Mechanical Engineering or Building Services Engineering, or equivalent.\n\n * \n\n Development: We actively support candidates working towards Incorporated (IEng) or Chartered (CEng) status, not essential.\n\nWhy Join Us?\n\nThe client offers a rare opportunity to see your designs come to life. Unlike a traditional consultancy where you may never visit the site, or a contractor where you don't influence the design, this role allows you to own the entire process.\n\nApply online or contact Astrid Camacho at Branta Recruitment for a confidential conversation

Civil / Structural Engineer\n\nRemote with occasional visits to the office\n\nLocation - Manchester OR London OR Newcastle OR Glasgow\n\nContract role - 6 months rolling\n\nInside IR35 - £65 / hour Umbrella\n\nA Civil / Structural Engineer is required to join a design consultancy on a 6-month rolling contract. The role is remote, but you MUST be willing to occasionally travel to either Manchester, London, Newcastle or Glasgow (dependent on your location). This role will be working in the Energy Transition industry working on low-carbon projects from early-stage development through construction, operation and eventual decommissioning.\n\nResponsibilities\n\nDeveloping Civil & Structural solutions across Feasibility, Concept, FEED, Value Engineering and Detailed Design stages.\nProducing structural 3D models, design reports, GA drawings, pipe support designs, foundation envelopes and RC detailing etc.\nSupporting the development of plant layouts and integrated 3D plant models.\nWorking with equipment vendors to refine equipment package designs and participating in technical evaluations.\nContributing to tender submittals for Civil & Structural work, as well as multidisciplinary tenders.\nOpportunities for site involvement during development, construction and commissioning phases.Requirements\n\nA relevant engineering degree\nWorking towards chartership\nExperienced in Civil / Structural detailed design.\nStrong working knowledge of national and international codes and standards used in the power and energy sectors.\nExperience with structural design software such as Robot Professional or STAAD Pro, and CAD tools such as Revit and AutoCAD.\nExperience collaborating with clients and contractors with diverse technical and commercial objectives.--- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website

Our client is a leading engineering and project services company who provide bespoke solutions across a number of marine and defence related areas. Due to recent projects won they now require an Electrical Design Engineer to join their busy North East office. \n \nThe Role\n \nElectrical Design.\nSpecification Writing.\nSpecifying of parts.\nCosting of Projects.\nTechnical Support to Customers.\nInspection and Test / FAT writing.\nworking on Electrical Department Standardisation and Efficiency Initiatives.\nUndertake the electrical design of work packs or projects with minimal supervision.\nDelivery of complex engineering solutions to agreed time scales and budgets.\nAbility to estimate, forecast, plan and execute to agreed plans.\nProvide technical support and guidance for commissioning and installation activities.\n \nThe Person\n \nDegree or Diploma qualified\nRecent experience of a similar role in a bespoke engineering environment\nExperienced in designing:\nPower distribution systems at both 230V & 440VAC\nMachine control and instrumentation systems\nControl Panel design\nMotor starter or VSD design\nExperienced in Electrical CAD packages.\nExperienced in working to ISO9001 or equivalent in a project based organization\nEplan Electric P8 experience\nPrevious experience within the Marine / Offshore environment\nWorking knowledge of DNV GL & Lloyds rules\nExperience of working with Subsea Vehicles including design of High Voltage systems\nKnowledge & experience of relevant functional safety standards (IEC61508, IEC61511, IEC13849)\nCommissioning & Test experience (advantageous)\nA high level of competence with IT systems and tools

Exciting Opportunity: Electrical Design Engineer\n\nAre you ready to take your career to the next level in the dynamic world of Electrical Engineering? Join our client, a leading organisation in the Switchgear Manufacturing industry, as an Electrical Design Engineer! This is your chance to work on innovative projects while contributing to a supportive and flexible work environment.\n\nLocation: Gateshead, Tyne and Wear\nContract Type: Permanent\nSalary: £35,000 - £45,000 (dependent on experience)\nWorking Pattern: Full Time\n\nAbout Us:\n\nOur client has been at the forefront of the Electrical Engineering sector since 1991, specialising in the design, manufacture, installation, commissioning, and maintenance of switchgear and control products. They cater to various sectors, including power, healthcare, chemical, and construction, making a significant impact across industries.\n\nKey Responsibilities:\n\nAs an Electrical Design Engineer, you will:\n\nDesign and Development:\n\nCreate electrical schematics, wiring diagrams, and layout drawings for switchgear systems.\nDevelop tailored solutions that comply with BS EN (phone number removed) standards.\nUtilise CAD tools, such as AutoCAD and EPLAN, for precise and efficient design documentation.Project Coordination:\n\nCollaborate with project engineers and production teams to ensure design feasibility and manufacturability.\nProvide technical support during installation and commissioning phases, backed by solid documentation.Quality and Compliance:\n\nEnsure all designs adhere to ISO 9001:2015 quality standards and health & safety policies.\nMaintain compliance with industry regulations and internal procedures.Continuous Improvement:\n\nParticipate in design reviews and propose enhancements for performance, cost, and reliability.\nContribute to retrofitting and upgrade projects for existing switchgear systems.To thrive in this role, you should possess:\n\nA degree in Electrical Engineering or an equivalent qualification\nProven experience in switchgear design and electrical systems.\nProficiency in design software, particularly AutoCAD and EPLAN.\nSolid knowledge of relevant standards (BS EN 61439, ISO 9001).\nStrong problem-solving and communication skills to drive collaboration and innovation.Why Join Us?\n\nOur client offers a vibrant and fast-paced working environment where your contributions are valued. Enjoy a culture that promotes:\n\nA supportive atmosphere with autonomy in your role.\nFlexibility to balance work and personal life.\nOpportunities for professional growth and continuous improvement.If you are passionate about electrical design and ready to make a difference in the switchgear manufacturing industry, we want to hear from you!\n\nApply today and embark on a rewarding career path where your skills and ideas will shine. Let's build the future of electrical engineering together!\n\nAdecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.\n\nAdecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer.\n\nBy applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

Job Title: Production Engineer\n\nSalary: £40,000 – £50,000\n\nLocation: Newcastle\n\nBenefits:\n\n * Paid overtime\n\n * Company pension scheme\n\n * 25 days annual leave plus bank holidays\n\nThe Company:\nThis is an exciting opportunity to join a well-established UK manufacturing business with a strong reputation for quality, innovation, and continuous improvement. The company designs and manufactures technically advanced products used across a range of commercial and industrial environments. With ongoing investment in people, processes, and technology, the business offers a stable yet progressive environment where engineers are encouraged to make a real impact. If you are looking to develop your career as a Production Engineer within a collaborative and forward-thinking organisation, this role offers long-term progression and hands-on involvement in modern manufacturing operations.\n\nJob Description:\nAs a Production Engineer, you will work as part of a cross-functional engineering and manufacturing team, taking responsibility for the selection, design, implementation, and continuous improvement of assembly and production processes. These processes include CNC routing, sheet metal punching and bending, welding, powder coating and paint curing ovens, as well as electrical assembly and testing.\n\nThe Production Engineer will own and improve existing machinery and processes while supporting the introduction of new equipment, tooling, and manufacturing techniques. You will define and document production procedures, drive efficiency improvements, reduce costs, and ensure product quality is maintained at all times.\n\nKey responsibilities include supporting new product introductions through jig and fixture design, supplier selection, PFMEA, ergonomics, factory layout, and cycle time optimisation. You will also provide technical support to production and maintenance teams, generate SOPs and installation documentation (ideally using 3D CAD models), and assist with resolving quality issues in collaboration with purchasing, design, and management teams.\n\nHealth & Safety compliance is critical, and the Production Engineer will ensure all activities align with company policies and procedures.\n\nSkills & Experience:\n\n * HNC/HND or equivalent engineering qualification.\n\n * Minimum 5 years’ experience in a similar manufacturing or automotive-related environment.\n\n * Strong hands-on background in production line design and process setup.\n\n * Experience with CNC, sheet metal, welding, coating, and electrical assembly processes.\n\n * CAD experience (2D & 3D), ideally Solid Edge/Solidworks.\n\nThis Production Engineer role is ideal for someone who enjoys working close to the shop floor and driving practical engineering improvements. If you are an experienced Production Engineer looking for your next challenge, this could be the opportunity for you

Job Opportunity: Slipform Engineer\nType: Freelance/ Temp-to-Perm\nInterviews: Taking place ASAP\nRate: Negoatiable based on the experience.\nWe are actively recruiting Site Engineer with Slipform experience for projects based in Newcastle. This is an excellent opportunity to secure a long-term role with immediate interview availability.\n🔧 Key Responsibilities of Site Engineer/Setting Out Engineer\nAs a Site Engineer / Setting Out Engineer, you will be responsible for:\n * Providing accurate setting out for Slipform\n * Carrying out as-built surveys and producing drawings using CAD\n * Completing pre-pour and post-pour inspections\n * Using TS16 total stations\n✔️ Requirements of Site Engineer/ Setting Out Engineer.\nTo be successful in this role, you must have:\n * A valid CSCS card\n * Right to work in the UK (British Passport / PSW / Dependent Visa)\n * Previous experience as a Site Engineer / Setting Out Engineer\n * Experience in Slipform or Jumpform (ideal but not essential)\n * Minimum 2 year of UK engineering experience\n * Proficiency with TS16\n📨 How to Apply\nIf you are interested in the Site Engineer / Setting Out Engineer position, please contact us and send your up-to-date CV.\nKeywords: #site engineer# setting out engineer# slipform engineer# site engineer# project engineer

Jackson Hogg is delighted to be recruiting a Senior Engineer / Principal Engineer to join a specialist engineering organisation based in the Newcastle upon Tyne area with a strong track record in delivering innovative solutions for hazardous and nuclear environments.\n\nAs a Senior / Principal Engineer, you will play a critical role in shaping projects from pre-concept stage through to delivery, ensuring engineered solutions meet the needs of multiple stakeholders and complex technical requirements.\n\nKey Responsibilities\n\n * Lead pre-concept and concept development for nuclear and hazardous environment projects.\n\n * Collate and manage requirements from multiple stakeholders to develop robust engineered solutions.\n\n * Oversee equipment design, including mechanical, electrical, and hydraulic aspects, and guide design teams to deliver technical specifications.\n\n * Support prototype assembly, testing, and validation of equipment in-house or on client sites.\n\n * Deliver engineering consultancy studies and detailed reports, presenting complex solutions to clients and project teams.\n\n * Mentor and develop junior engineers while contributing to organisational engineering practices.\n\nRequirements\n\n * Degree in Mechanical Engineering (BEng or above) with significant experience in the nuclear or hazardous environment sector.\n\n * Proven track record in decommissioning projects, site operations, safety systems, and waste handling.\n\n * Experience leading multi-stakeholder projects, capturing requirements, and generating actionable engineering solutions.\n\n * Strong understanding of detailed design and engineering processes, with familiarity in CAD and relevant engineering software.\n\n * Excellent communication skills, including presenting complex engineering solutions and report writing.\n\n * Chartered Engineer status desirable; experience in manufacturing, fabrication, or multi-discipline engineering is advantageous.\n\nThis is an exciting opportunity for a Senior / Principal Engineer looking to influence project direction, deliver practical solutions, and work across a variety of innovative nuclear and hazardous environment projects.\n\nWhat’s on Offer for you? A competitive salary (DoE), annual bonus, generous holiday allowance, private healthcare, flexible working, and professional development opportunities. This is the chance to work in a collaborative, supportive work environment, where your contributions and ideas will be highly valued and celebrated.\n\nIf this sounds like a role you're interested in, please apply here or get in contact with Charlie Muzzlewhite at Jackson Hogg to arrange a confidential call and ask any questions

Jackson Hogg Recruitment are supporting a manufacturing business on a confidential hire for a hands‑on CNC engineering role, focused on developing, proving, and optimising machining processes directly on the shop floor.\n\nThis is not a traditional desk‑based CAM role, and it is not sales or pre‑sales focused. The position sits at the heart of machining performance, owning CNC methods from customer drawing through offline programming, prove‑out, and into stable production.\n\nThe remit is to deliver robust, repeatable and cost‑effective machining processes, with a strong emphasis on cycle time improvement, process stability, and continuous improvement at the machine.\n\nWhat the role involves\n\n * Developing high‑quality offline CNC programs for complex components, including multi‑axis machining\n\n * Creating CAD models and defining machining strategies, tooling, fixtures, and setup documentation\n\n * Leading prove‑outs, cutting trials, and process optimisation on the shop floor\n\n * Troubleshooting machining issues such as chatter, tool wear, dimensional variation, and alarms\n\n * Embedding improvements into standard methods rather than firefighting recurring problems\n\n * Applying lean and continuous improvement principles to CNC processes (e.g. time studies, waste reduction, setup optimisation)\n\n * Working closely with tooling suppliers, production teams, and engineering stakeholders\n\n * Supporting new machine introductions and capability development\n\n * Providing accurate cycle times and technical input to support bids and planning\n\nWhat we’re looking for\n\nThis role will suit an engineer who:\n\n * Has strong CNC machining and CAM experience (e.g. Powermill or similar)\n\n * Is comfortable moving between offline programming and hands‑on shop‑floor involvement\n\n * Enjoys improving processes at source rather than producing CAM programs in isolation\n\n * Has a solid understanding of machining principles, cutting tools, materials, and tolerances\n\n * Is confident supporting prove‑outs, early production, and technical problem‑solving\n\n * Values repeatability, robustness, and continuous improvement\n\nBackgrounds often aligned with this role include:\n\n * CNC Machinists who have transitioned into CAM / process engineering\n\n * Manufacturing or Production Engineers with deep machining expertise\n\n * CNC Applications or Process Engineers in low‑volume, high‑complexity environments\n\nWhy consider this role?\n\n * Genuine shop‑floor influence and technical ownership\n\n * Opportunity to work on complex components and advanced machining\n\n * A role focused on process improvement and stability\n\n * Long‑term opportunity to shape machining capability within the business

Position: Refrigeration Design Engineer (Industrial Refrigeration) Contract: Permanent, Full Time Location: Remote - Based anywhere in the UK (Head office is based in Leicestershire) Salary: up to £75K plus company car or cash allowance & benefits & performance bonus Industry: Industrial Cooling & Refrigeration – Food/FMCG, Cold Storage & Logistics, Data Centre PRS Engineering has engaged with a key client and a leading Industrial Cooling & Refrigeration specialist operating and delivering high value projects across the UK with headquarters based in Leicestershire. Due to team expansion and winning new projects, we are seeking an Industrial Design Engineer with a background in Ammonia, CO2 Systems, Industrial Cooling Technologies &/or Industrial Refrigeration to support business requirements and oversee key projects. This is a remote working role with occasional attendance at the Leicester office will be required as will site visits and site surveys. The Role: To design and propose industrial refrigeration systems for food manufacturing facilities and logistics cold storage centres. Detailing costs and designs to customers while meeting legislative and customer-specific requirements. To create comprehensive designs from initial briefs and/or drawings, whilst adhering to the latest company and industry standards. Produce detailed design work, consisting of but not limited to: cold room and facility heat load calculations, equipment selections, pumped circulation system design, P&ID development and approvals, concept design presentations, sales stage design applications, engineering specification sheets, pipework isometric drawings, and pipe sizing for ammonia refrigeration systems. This is a remote working role, but attendance at the Leicester office will be required as will site visits, surveys, and client presentations. Main Responsibilities • Carry out site surveys where required, • Generate and update enquiry bank, • Attend customer scoping and design meetings where required, • Produce initial outline design/scope, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • Produce detailed design post sales stage and convert into live project for delivery team, • Conduct heat load calculations, produce engineering sheets and pipework isometric, • drawings, equipment selections and pipe work sizing, • Produce supplier/sub-contractor enquiries for quotations, • Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing with support of delivery team, • Raise Contract Approval Form to enable project to be booked on system, • Mark up drawings and issue to CAD department to produce, • Attend site at least once during project installation period, to carry out design review, • Assist PM during delivery phase for design queries, • Maintain excellent service levels at all times, ensuring a “first Class” service to all customers, • Take on projects as and when required and see them through to successful completion Financial • Produce estimates in line with customer budgets and to agreed company margins, • Produce formal scope of works and formal quotations, • Assist CM with project variation design and costs All contracts over £500k to have contract/design review with senior member of staff, • To identify means of generating extra revenue through new initiatives (forward thinking) People • One to one session with line manager once a quarter, • To treat other colleagues, managers, customers and other stakeholders equally and with courtesy and respect at all times, • Where possible - to assist others with tasks that may be outside of the scope of your role, • To assist with coaching other colleagues/managers, for cross training purposed in your area of expertise Compliance • Ensure that all relevant company and legislative policies and best practices are adhered to and always maintained, • Inform the relevant Manager of non-conformances and ensure that corrective action is taken, • Ensure compliance with all procedures throughout within your remit, • Produce Design File (electronic or hard copy) in line with ISO 9001 standard, • To ensure Refrigeration industry codes and standards are upheld, • To comply with environmental policies and putting forward new ideas for, • improving environmental efficiencies., • Adhere to Group H&S procedures with due regard for business constraints and efficiency

Job Description for Design Engineer (Mechanical/Chemical/Process) Environmental Control Systems Location: Remote (UK-based) with travel to client sites Grade: S4 – Intermediate Project/Design Consulting Engineer Salary: £42,000 – £48,000 per annum (dependent on experience) Contract: Permanent, full-time (40 hours/week, flexible) Reports to: Managing Director / Senior Engineer OUR COMPANY MECHON is an independent environmental control systems consultancy. We design ventilation, LEV, specialist HVAC, and air pollution control systems for manufacturing, defence, pharmaceutical, and R&D environments across the UK and internationally. Our clients include major defence contractors, automotive manufacturers, chemical companies, and research facilities. We are not a contractor or installer. We are the consulting engineers who assess the problem, design the solution, write the specifications, and oversee delivery. Our work combines chemical and mechanical engineering — from workplace exposure assessment and DSEAR risk analysis through to full system design, dispersion modelling, and commissioning support. We are looking for a Design Engineer to join our team at Intermediate level (Grade S4), with a structured 2–4 year development pathway toward becoming a fully independent consulting engineer. WHAT YOU'LL DO You will work under the guidance of senior engineers to deliver environmental control system designs from concept through to completion. This is a consulting engineering role — the primary outputs are engineering calculations, risk assessments, technical reports, and design specifications. We have a dedicated CAD team; drawing production is not your core function. Your responsibilities will include: • Engineering calculations for LEV and process HVAC systems (airflow, pressure drop, thermal loads, exposure benchmarking), • ite surveys and audits to assess existing systems and gather design information, • Risk assessment work including COSHH exposure assessment and DSEAR under senior supervision, • Technical report writing and design specifications for clients, • Client liaison - attending design meetings, presenting findings, managing technical relationships, • Supporting project delivery from concept through to commissioning and handover WHAT WE NEED FROM YOU We don't expect you to arrive as a ventilation specialist. We do expect a solid grounding in engineering fundamentals that we can build on. Essential: • Degree in Mechanical Engineering, Chemical Engineering, Process Engineering, or closely related discipline, • Minimum 3 years' post-graduation engineering experience (does not need to be in ventilation, • process engineering, chemical plant, risk assessment, building services, or similar are equally relevant), • Working knowledge of fluid dynamics, thermodynamics, and heat transfer applied in a professional setting, • Strong written English and the ability to produce clear, structured technical reports, • Full UK driving licence, • UK right to work Desirable: • Experience with risk assessment methodologies (HAZOP, DSEAR, COSHH, or similar), • Exposure to consultancy or client-facing technical roles, • Professional registration or working toward CEng/IEng, • Competence with CAD software (AutoCAD, Revit, or similar) THE KIND OF ENGINEER WHO DOES WELL HERE Our environment is different from a large consultancy. There's no layer of project managers between you and the client. You won't have a team of 20 around you. What you will have is direct responsibility, genuine autonomy, and senior engineers who will invest time in your development. Our most successful engineers share certain qualities: they take ownership of problems without waiting to be told, they communicate clearly under pressure, they're motivated by the quality of their work rather than their job title, and they have the patience to develop genuine expertise in a specialist discipline. Our most successful hires have come from a range of backgrounds including chemical engineering, process engineering, and mechanical engineering. What matters more than your specific discipline is how you think, how you communicate, and whether you take pride in producing work that stands up to scrutiny. WHAT WE OFFER • £42,000 – £48,000 depending on experience, • Fully remote working with UK-wide site visits, • Structured development programme with senior engineer mentoring, • Funded CPD and professional development (training courses, BOHS qualifications, chartership support) 22 days annual leave plus bank holidays, increasing to 25 at the next grade, • Pension with employer contribution, • Travel expenses for site visits fully reimbursed, • A specialist consultancy where your engineering skills are the product, not a support function HOW TO APPLY Please submit your CV and a brief covering statement (no more than 300 words) explaining why this role interests you and what you would bring to MECHON. We are particularly interested in the breadth of your professional experience and how you approach unfamiliar technical problems. We don't use automated screening. Every application is reviewed by the team.

Site Engineer / Project Engineer (Electrical, OHL, Transmission, National Grid) Transmission, Distribution, OHL Salary: £dependent on experience + benefits + site bonuses Benefits: Company vehicle (for site travel), professional memberships, support toward chartership Location: UK-wide (travel to project sites and office locations as required) Full-time ARCA Resourcing is partnering with an ambitious and fast-growing engineering organisation within the UK construction and energy sector to recruit a Site / Project Engineer. This is a fantastic opportunity for an engineer looking to develop a well-rounded skillset across design, site delivery, and project engineering, working on high-voltage infrastructure and renewable energy projects across the UK. The Role This is a hybrid engineering role combining design coordination, CAD work, project support, and site-based responsibilities. You’ll gain exposure across the full project lifecycle - from early-stage surveys and design through to construction, commissioning, and close-out - supporting the delivery of substations, overhead lines, cable installations, and grid connection schemes. Key Responsibilities • Interface with clients including National Grid and UK DNOs, • Support communication between site teams, design teams, and project leadership, • Coordinate and support topographical, environmental, and utility surveys, • Produce and update 2D and 3D CAD drawings for design and construction use, • Assist with preparation of technical documentation, including method statements and construction phase plans, • Coordinate site logistics, deliveries, and supply chain interfaces, • Assist in managing site activities to ensure safe and efficient delivery, • Liaise with subcontractors, suppliers, and client representatives, • Support implementation of SHEQ (Safety, Health, Environment & Quality) standards, • Contribute to risk assessments, HAZIDs, and constructability reviews, • Ensure compliance with CDM Regulations and site safety requirements, • Proficiency in AutoCAD and relevant CAD software (e.g. Civil 3D, MicroStation), • Understanding of transmission & distribution or renewable energy projects, • Awareness of health & safety legislation, including CDM, • Good communication and stakeholder engagement skills Experience & Qualifications Essential: • Experience on live construction or infrastructure projects in an engineering or supervisory role, • Practical understanding of site-based project delivery, • Full UK driving licence and willingness to travel Desirable: • Experience working on National Grid or DNO projects, • Familiarity with project controls (cost, programme, risk), • Exposure to substations, overhead lines, cables, or grid connections, • Progress toward or holding relevant authorisations (e.g. SR163, Competent Person, NSI8), • Experience with UAV surveys, GIS systems, or digital field tools Why Apply? • Work with a forward-thinking and growing organisation in the energy sector, • Gain exposure across design, site delivery, and project engineering, • Be involved in high-profile UK infrastructure and renewable projects, • Strong support for career development and professional progression, • Competitive salary, benefits, and performance-related bonuses Apply Now If you’re a motivated engineer looking to build a diverse career across project delivery and site engineering, we’d love to hear from you. Apply today through ARCA Resourcing. Please click on the link to apply.

Project Engineer - Solar PV Projects Location: 100% Remote Employment: Contract Duration: 9 Months Role Purpose The Project Engineer is responsible for the technical development, design, and execution of solar PV projects, both Behind-the-Meter (BtM) and Grid Connected (GC) across all project stages. This role ensures that projects are engineered to meet performance, safety, and quality standards, supporting the organization’s mission to deliver reliable, efficient, and innovative renewable energy solutions. 1. Project Engineering Across All Stages Development Stage: • Provide technical input for site assessments, feasibility studies, and conceptual designs., • Support the preparation of technical documentation for permitting and grid connection applications., • Collaborate with development, commercial, and external partners to optimize project layouts and technology selection. Design Stage: • Lead the review of the detailed engineering design performed by third parties, including electrical, mechanical, civil, and communication aspects., • Coordinate with internal and external designers/advisors, ensuring compliance with codes, standards, and best practices., • Prepare and review technical specifications, drawings, and BoQs for procurement and construction. Execution Stage: • Provide technical support during procurement, construction, and commissioning., • Review and approve contractor submittals, manage technical queries, and resolve site issues., • Ensure quality control and compliance with design intent throughout construction and handover. 2. Continuous Improvement & Knowledge Sharing • Capture lessons learned and contribute to the development of engineering standards and templates., • Support innovation and the adoption of new technologies and processes. Key Interfaces: • Procurement & Construction, • Site Development, • Investment, • Revenue, • BTM Sales, • External consultants, contractors and regulatory authorities, • Asset Management Goals & KPIs • Successful delivery of project engineering deliverables on time and within budget., • Achievement of project performance, safety, and quality targets., • Positive feedback from internal and external stakeholders., • Contribution to set up the technical function across the company through process improvements and knowledge sharing. Qualification criteria • Degree in Engineering (Electrical, Civil, Mechanical, or related field), • +3 years of experience in solar PV project engineering (BtM and/or Grid Connected), • Proficient in PVSyst and CAD software such as AutoCAD, BricsCAD, PVCase, etc., • Must have worked on similar UK solar PV projects., • Experience with BESS will be positively considered., • Familiarity with relevant codes, standards, and permitting processes., • English fluent is mandatory; other languages such as Swedish or Spanish are desirable., • Strong communication and teamwork skills.

Ready to Join the Backstage Crew? At Bleckmann, we’ve been delivering on promises since 1862. As a market leader in supply chain management for fashion and lifestyle brands, we keep the show running behind the scenes — from moving boxes to moving data, from pack & ship to IT and HR. But we’re not just logistics experts. We’re The Backstage Crew — a tight-knit team of 6,500+ people who make fashion and lifestyle brands shine by doing the work that matters most, out of the spotlight but never out of impact. Whether you're on the warehouse floor or behind a screen, you’ll find: • Strong connections with colleagues who support and celebrate you., • Fast growth in a company that’s expanding across Europe, the US, and Asia., • High energy in a dynamic environment where no two days are the same., • Guided freedom to take initiative, solve problems your way, and grow your career. We believe in entrepreneurship, expertise, excellence, and engagement — and we live these values every day. From repairing returned goods to reducing waste, we help brands extend product lifecycles with sustainability in mind. So if you’re ready to roll out the red carpet for our clients — and for each other — we’ve got a spot for you. Behind the scenes is where the real excitement begins. Ready to join us? Tasks and responsibilities: At Bleckmann, engineering excellence and innovation are at the core of our ability to deliver world-class & cost-optimized logistics solutions. As a Warehouse Solution & Design Engineer, you have a leading role in designing and implementing warehouse solutions for our customers. You will be responsible for developing efficient warehouse layouts, optimizing material flows, and integrating automation to enhance operational performance. In this role, it is crucial to support our operational teams in optimizing existing processes and ensuring smooth implementation of new solutions. You will collaborate closely with various stakeholders, including project managers, IT specialists, and operations teams, to deliver customized, high-performing warehouse solutions. You will be part of a multifunctional project team and will be exposed to many aspects of our global warehouse operations. Your expertise in warehouse design and process improvement will directly contribute to increasing efficiency, reducing costs, and ensuring scalability in our logistics operations. Through these responsibilities, the role ensures that Bleckmann continues to lead in logistics automation, delivering cost-effective and innovative engineering solutions that drive operational excellence. Profile: 1.Technical Expertise: • Strong background in warehouse operations, layout design, and process optimization., • Proficiency in CAD software (e.g., AutoCAD) and warehouse simulation tools., • Knowledge of automation systems, material handling equipment, and warehouse management systems (WMS)., • Data analysis skills to support design decisions and process improvements., • Knowledge and application of Methods-Time Measurement (MTM) for process optimization and efficiency analysis. 2. Experience & Education: • Professional Experience: 5–7 years in warehouse design, supply chain engineering, or a related field., • Educational Background: Degree in Industrial Engineering , Supply Chain Management, Logistics, or a related field. 3. Personal Qualities & Soft Skills: • Customer Engagement: Ability to actively listen to customer needs and effectively translate them into practical, high-impact warehouse solutions., • Leadership & Influence: Ability to coordinate and align multiple stakeholders to ensure successful warehouse solutions., • Strategic & Analytical Thinking: Capable of developing data-driven warehouse strategies and optimizing logistics flows., • Problem-Solving Mindset: Practical and hands-on approach to overcoming warehouse design and implementation challenges., • Communication & Stakeholder Management: Strong ability to present warehouse concepts, layouts, and optimizations effectively to internal teams and customers., • Language Proficiency: Language Proficiency: Fluent in English (written & verbal); Dutch is a plus., • Strong presentation skills to confidently communicate solution designs to both technical and non-technical audiences. 5. Additional Requirements : • Interest in New Technologies: A high interest in staying abreast of the latest technologies and innovations in the field of warehousing., • Mobility: Willingness to travel occasionally for supplier engagements, site visits, and customer meetings. What do we offer ? • Mobility: Willingness to travel to implementation sites as needed, including extended stays during implementation phases., • Interest in New Technologies: High interest in staying up-to-date with the latest automation technologies and warehousing solutions.

Are you a CAD Technician with Highways experience looking for a role that will allow you to step up to Design Engineer and beyond as your experience develops?. They are now looking for a CAD Technician to assist with a recent increase in workload to grow with the company.

Graduate CAD Technician (Highway Design) Want to apply Read all the information about this position below, then hit the apply button. £30,000 - £40,000 + Private Medical / Dental + Tusker Car Scheme + Profit Share + Individual Bonus + Training + Progression Newcastle Are you a recent graduate, who is proficient in AutoCAD, looking to work for a well-established, market-leading consultancy offering comprehensive solutions for all aspects of transport planning? On offer is a job at a rapidly growing, employee-owned transport planning and highway design consultancy that has been operating for over 20 years. At least 1 year of experience with AutoCAD and some highway design experience is required (this can be through a degree placement). Training will be provided on Civil 3D and Micro Drainage software. You will work in the highway design sector across various projects. Responsibilities will include detailed highway layouts, preparing detailed drawings in line with MCHW series requirements, working with key highways standards and supporting the road safety audit process. This role would suit a recent engineering graduate with experience in AutoCAD and highway design knowledge who is eager to develop technical skills and progress within a growing transport planning consultancy. The Role • Designing and implementing highway design solutions, • Develop relationships with key stakeholders, • Complete tasks to budget, • AutoCAD experience, • Highway design experience Reference Number: BBBH24793 Keywords: AutoCAD, Civil 3D, Highway Design, Micro Drainage, Transport Planning, Graduate, Engineer, Newcastle We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. xrnqpay By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Candidates should have a degree in Mechanical Engineering or a related field, extensive experience in mechanical engineering, and strong skills in 3D CAD tools like Autodesk Inventor. Energy Jobline CVL is seeking a Senior Mechanical Engineer to contribute to the design and development of next-subse

A leading engineering firm in Newcastle is seeking an enthusiastic Engineer to join their Roads team. Candidates should have a relevant engineering qualification and experience in CAD/BIM environments, particularly with AutoCAD and Civils3D.

A multidisciplinary engineering firm based in the United Kingdom is seeking a Senior Mechanical Engineer to develop advanced mechanical systems for the marine, offshore, and defence sectors. A degree in Mechanical Engineering and proficiency in CAD tools are essential.

Electrical Design Engineer £40,000 - £50,000 + Private Medical Care, Annual Bonus, Travel/Offshore Uplifts 37.5 hours a week with Hybrid & Flexible working options Daily free lunch Excellent supported training to advance skills Fast growing business with strong order book North East based role Ref: 25241 A growing specialist engineering consultancy is seeking an Electrical Designer to join its expanding engineering team. This is an excellent opportunity to become part of a technically focused organisation delivering bespoke electrical and control systems across complex industrial and energy-related projects. Working as part of a small and collaborative design team, you will be involved in the design of LV control panel systems, supporting projects from concept through to build and commissioning. The role offers strong technical exposure, long-term project work, and the opportunity to develop your skills within a supportive engineering environment. Electrical Design Engineer - The Role: Electrical design of LV control panel systems Producing schematics, wiring diagrams and panel layouts using AutoCAD Electrical Supporting design activities from concept through to manufacture Collaborating with controls engineers and project teams Assisting with technical documentation and design updates Occasional site support and commissioning activities (~10% travel) Very occasional offshore work You will join a team of four designers, within a supportive and collaborative technical environment. Electrical Design Engineer - The Person: c3+ years’ experience of control panel electrical design for industrial automation Experience designing LV control panels Experience using AutoCAD Electrical or other electrical CAD / 3D electrical design software Knowledge of HV systems would be advantageous but is not essential Strong attention to detail and ability to work within a project team Willingness to occasionally support site activities Located in Tyne & Wear, this role would be commutable from Newcastle upon Tyne, Sunderland, Durham, Gateshead, Jarrow, Hebburn, Washington, Chester-le-Street, Blyth, Cramlington, Seaham North Shields, South Shields, Morpeth, Peterlee and surrounding areas. For further information please contact Sarah Clarke AE2

Lead Mechanical Design Engineer £55-60k + Pension, Private Medical Care, Annual Bonus Tyne & Wear Ref: 25335 A specialist engineering consultancy delivering bespoke subsea and marine equipment is looking to recruit a Lead Mechanical Design Engineer to join its growing team. This is a key hire into a small, highly experienced group of engineers with strong roots in the North East subsea sector. The business was founded by engineers with a passion for keeping high-quality engineering in the region. With a rapidly growing order book and projects moving quickly from concept to delivery, this role offers the opportunity to take real ownership of complex, one-off mechanical systems. Lead Mechanical Design Engineer - The Role: As a Senior Mechanical Design Engineer, you will take a leading role in the full lifecycle design of bespoke subsea equipment, working from initial concept through to manufacture, test, and deployment. Leading concept and detailed design of complex mechanical systems Performing hand calculations and stress analysis Taking ownership of full project delivery, not just isolated design packages Supporting manufacture, assembly, and factory acceptance testing (FAT) Producing and reviewing technical documentation Acting as a technical point of contact for clients Mentoring and supporting junior engineers within the team Conducting peer reviews and contributing to engineering standards Lead Mechanical Design Engineer - The Person: This role would suit an experienced Mechanical Design Engineer looking to step into — or already operating at — a senior/lead level within a small, high-performing engineering team. ~5+ years’ experience in mechanical design within subsea, marine, or oil & gas Proven experience delivering full lifecycle projects (concept → manufacture) Strong capability in hand calculations and stress analysis Experience designing fabricated structures and mechanical systems Background in companies such as subsea OEMs or specialist engineering firms CAD experience (Inventor ideal, SolidWorks also suitable) Strong communication skills and ability to work closely within a small team A proactive, hands-on approach with a willingness to take ownership An excellent opportunity to work on genuinely bespoke, complex equipment as part of a team who are passionate about what they do within a relaxed and friendly environment. Located in Tyne & Wear, this role would be commutable from Newcastle upon Tyne, Sunderland, Durham, Gateshead, Jarrow, Hebburn, Washington, Chester-le-Street, Blyth, Cramlington, Seaham North Shields, South Shields, Morpeth, Peterlee and surrounding areas. For further information call Sarah Clarke AE1

Mechanical Engineer We’re working with a well-established manufacturing business looking to bring in an experienced Mechanical Engineer to support their production operations. This is a hands-on role, combining day-to-day engineering support with involvement in improvement projects and longer-term site development. The role: You’ll be responsible for keeping production lines and associated equipment running efficiently, safely and reliably. Alongside reactive work, there’s a strong focus on preventative maintenance and continuous improvement across the site. What you’ll be doing: Supporting production lines and ancillary equipment across the factory Planning and carrying out preventative maintenance Identifying and implementing line and process improvements Mechanical fault finding, repair and component replacement Monitoring line efficiency and downtime, contributing to improvement plans Getting involved in CAPEX projects from planning through to implementation Setting up, adjusting and running production lines when required Supporting quality standards and reducing waste, spoilage and complaints Carrying out routine maintenance (oiling, greasing, housekeeping) Working on fabrication tasks including welding, turning and milling Supporting and mentoring apprentices and line staff Liaising with production teams and external suppliers What they’re looking for: Mechanical engineering qualification (essential) At least 5 years’ experience in a similar manufacturing environment Experience using CAD/SolidWorks Strong fault-finding and problem-solving ability Good understanding of maintenance systems and data Comfortable working in a fast-paced production setting About you: A team player who can also work on their own initiative Practical, methodical and organised in your approach Safety-focused, with an understanding of hygiene standards in a food/FMCG environment Confident communicator, able to work across teams and levels Someone who can support change and continuous improvement on site If this sounds like something you’d be open to, feel free to get in touch for a confidential chat

Baltic Recruitment are delighted to be supporting our market leading manufacturing client with their search for a Production Engineer. Job Purpose: A key role within the business managing the whole production process, making sure everything runs smoothly and effectively. Making key improvements to manufacturing processes throughout the business. Full responsibility for a number of manufacturing processes within the business including: CNC Routing, Sheet Metal Fabrication, Welding, Powder Coating and Electrical Assembly. Key Duties: Ownership/Continuous improvement of existing machines/processes. Selection of new assembly processes/techniques. Specification/Development of new equipment/tooling. Defining new and existing production procedures, finding ways to reduce costs and maximise efficiency while maintaining product quality. Train staff in new and existing processes. Collaborate with design engineers and management in developing new manufacturing processes and technologies. Machine/process introduction including: Supplier selection, Ergonomics, PFMEA, Concept Design, Cycle time achievement and reduction, Factory layout, Technical files and operating instructions, Support for production and Maintenance teams. Resolving Quality Issues highlighted by shop floor and seeking corrective actions via Purchasing from suppliers as required. Liaise with other departments as required if design or BOM changes are required. Generating Installation documents for New Products and SOP's for existing products ideally with ability to work with 3D models to generate literature.Key Requirements: Minimum of HNC/HND Standard or equivalent. Min 5 years' experience in similar industry or some automotive experience preferred. Technical background, with hands-on experience in designing and setting up production lines for new processes. Software knowledge (MS Office, 2D and 3D CAD, Ideally SolidEdge).The Package: £35,000 - £45,000 per annum depending on experience. Paid overtime. Working Hours are 9am - 5pm Mon-Fri - can be flexible on this. Company Pension. 25 days holiday. 6 month Probationary Period

Rewards and Benefits on Offer; • Immediate start available, • Competitive basic salary, • Dayshift, • Free on-site parking, • A streamlined, quick interview process MTrec’s New Opportunity; MTrec Technical are proudly representing our prestigious manufacturing client, based just North of Newcastle by recruiting a permanent Manufacturing Engineer. You will be joining an industry leading company, with an excellent team-based culture and fantastic long-term career prospects . If you have a background within Manufacturing. Production, Continuous Improvement or similar, apply now for an immediate response The Job You’ll Do; • Take responsibility for the manufacturing processes end-to-end, • Drive improvements in cycle time, throughput, and yield, • Standardise processes to minimise variation and reduce reliance on individual operators, • Be actively present on the shop floor during issues, rather than managing remotely, • Lead structured root cause analysis using methods such as 8D, 5 Whys, and fault finding, • Resolve recurring issues including press stoppages, induction instability, tooling failures, and scrap trends, • Deliver measurable results, including improvements in OEE, and reductions in downtime and scrap, • Implement Lean methodologies effectively, including 5S, Standard Work, and Visual Management, • Challenge and correct ineffective or poor practices, • Develop and maintain SOPs, work instructions, and process flow documentation, • Put controls in place to prevent repeat failures, • Lead new product introduction from concept through to full production, • Define processes, tooling requirements, and trial plans, • Ensure successful right-first-time product launches, • Support validation activities through capability studies and formal sign-offs, • Monitor and respond to key metrics such as OEE, scrap, and downtime, • Contribute to tooling and die design improvements, • Collaborate with the Toolroom to eliminate recurring failures and quality issues, • Ensure full compliance with Health & Safety requirements About You; HNC or above in Mechanical / Manufacturing Engineering or similar Experience in heavy engineering, automotive or similar Strong background in process improvement within production environments Strong Experience with CAD (Fusion 360 or similar) Able to understand engineering drawings & tolerances Experience with PFMEA, Control Plans, SPC and Structured problem solving (8D, 5 Why) Self-driven and able to work on own initiative Comfortable in a fast-paced, hands-on environment Willing to challenge poor standards Strong shop floor presence — visible and accountable

They are now seeking a skilled and experienced CAD Engineer to join their trusted and successful business. To assist with the production of CSV notching files by manually extracting applicable data from live drawings using bespoke software built into AutoCAD. THE CANDIDATE : Good knowledge of AutoCA

About You; Working knowledge of 2D / 3D CAD software (AutoCAD & SolidWorks preferable) Degree/HND in Product Design or Engineering (preferable) Detail oriented and conscientious with good problem-solving skills. MTrec are proudly representing our prestigious manufacturing client, based near Cram

A key engineering recruitment firm in Greenwich is seeking an experienced Mechanical Design Engineer to lead the design and validation of tooling for new submerged products. The ideal candidate should have a degree in Mechanical or Manufacturing Engineering and strong CAD tooling expertise.

Supporting Senior Engineer/Team Leader with the development of designs using Civil3D and AutoCAD. Adept in the use of AutoCAD and aptitude to further develop in Civils3D/GIS including the use of BIM. We are one of the world's leading engineering and professional services firms.

Candidates should hold a Master's degree in Engineering and be proficient in CAD and Microsoft 365. A technology client in the engineering sector is seeking a Graduate Production Engineer to join their team near Cambridge.

Automation Experts Ltd is seeking a Mechanical Design Engineer in Lincolnshire to design components and support product development. This role involves creating detailed 3D CAD models and manufacturing drawings, implementing design changes, and conducting validation tests. Candidates should be profi

Atlas Copco Group is looking for a Drawing Engineer to undertake site surveys and audits of Medical Gas Pipeline Services in Chesterfield, UK. The ideal candidate will have a higher-level qualification in mechanical or electrical engineering and relevant experience in healthcare environments.

A leading engineering solutions provider in Washington, UK seeks a full-time Design Application Engineer. Candidates should have an HND/BEng/MEng in Mechanical or Electrical engineering and at least two years of experience in an engineering environment. Responsibilities include creating designs, man

A leading engineering company in Derby is seeking a Senior Design Engineer to join their innovative team. Ideal candidates will have strong experience in design engineering and be familiar with 3D CAD and PLM systems. Responsibilities include designing components, creating CAD models, and ensuring s

Following their exciting pipeline, they are now looking to expand their team through the hire of a CAD Design Engineer to help support their design processes across their solar and battery storage projects. This company was founded over a decade ago and has since built a strong portfolio, with a mul

Mechanical Design Engineer (CAD Tooling). Degree (or equivalent) in Mechanical/Manufacturing Engineering. Strong ability to apply reliability engineering judgement.

Ideal candidates should have an HNC/HND or Degree in Engineering, experience in a Quality Engineering role, and be proficient in SolidWorks. A forward-thinking manufacturing organisation is seeking a Quality and Applications Engineer to manage quality systems, support product development, and serve

A thriving engineering firm in York is seeking an experienced CAD Design Engineer to join their expanding team. This position offers an opportunity to contribute to a variety of engineering projects, primarily within the food industry, while also providing mentorship to design apprentices. The ideal

A design and engineering firm is seeking a talented Design Engineer to join their R&D team. The successful candidate will be responsible for creating high-quality 3D CAD models, providing technical support, and contributing to the development of new products. A strong understanding of engineering pr

A well-established fabrication business in Telford is seeking a Mechanical Design Engineer to create 3D-CAD models, generate detailed production drawings, and provide engineering support. The ideal candidate will have a degree in Design or Engineering, experience in designing complex assemblies, and

A leading recruitment consultancy is seeking a Technical Design Engineer (CAD Tooling) for a permanent position with a client in London. The ideal candidate should hold an engineering degree and have experience working with the Creo CAD package.

A leading recruitment agency is seeking a Property Engineer to manage vehicle design and functional validation projects. An engineering degree is required for this position.

TipTopJob is seeking a Design Engineer based in Stanley, England, to join their Engineering team. The role involves customer interaction, technical specifications development, and creation of CAD models. The ideal candidate will have strong interpersonal skills and relevant engineering qualification

Consortio RG Ltd in Essex seeks an engineer with expertise in control and monitoring solutions. The ideal candidate should have a strong understanding of programmable logic controllers, CAD skills for technical drawings, and experience with low voltage control systems.

A leading engineering recruitment firm is seeking a Graduate Electrical Design Engineer to join their team in Somerset. This entry-level position involves developing electrical designs, working with CAD software, and collaborating with engineers to create components. The role offers a salary between

Working within the design engineering department, candidates will be responsible for the design and production of CAD manufacturing drawings for sheet metal and fabricated metal products. To support increasing demand for Trueform’s award winning products we require a number of additional, experien