Cad engineer jobs in FarnboroughCreate job alerts

Mechanical Engineer - Aldershot £30,000 - £37,000 per annum DOE An exciting opportunity has arisen for a hands-on, enthusiastic Mechanical Engineer to join a specialist team designing, building, and installing advanced conveyor and automated handling systems across the UK and internationally. This is a varied, skilled mechanical engineering role combining workshop-based fabrication with on-site installation and commissioning. You’ll be working with cutting-edge automated systems where precision, problem-solving ability, and practical engineering know-how are essential. Our client is looking for somebody who is happy to work away from home 2 to 3 weeks per month, accommodation and travel cost will be paid for by the company. You’ll be part of a collaborative team while also confident working independently, taking ownership of tasks from build through to final commissioning. Company Benefits: • 22 days annual leave (plus bank holidays), pro-rata in first year, • Overtime available (typically up to approx. 50 hours per month, not guaranteed), • Overtime paid at enhanced rates:, • Time + ½ weekdays, • Time + ½ Saturdays, • Double time Sundays, • Salary reviews after 3 months and annually thereafter, • Company bonus scheme participation, • Split working between a workshop environment and customer sites across the UK, with occasional overseas travel (including stays away of up to 2–3 weeks per month depending on project locations), • Mechanical assembly and setting of conveyor and automation systems using 2D/3D CAD drawings and build schedules, • Fabrication of aluminium extrusion frames, conveyor systems, and safety guarding, • Installation and setup of pneumatic systems including piping, fittings, and sensor positioning, • Setting and calibrating sensors, preparing equipment for commissioning and software integration testing, • On-site installation work as part of a team, including unloading, positioning, and assembly of equipment to precise specifications and site conditions, • Assisting with cable management systems, frame construction, and guarding installation, • Supporting service visits including maintenance, warranty work, and breakdown response, • Fault finding, diagnostics, and problem-solving on live systems, with clear communication of findings and solutions, • Producing clear and accurate service reports following site visits, • Maintaining high standards of quality, presentation, and attention to detail in all work, • Working in a clean, safe, and organised manner at all times, • Collaborating closely with engineering and production teams to support improvements, prototypes, and design feedback, • Adhering strictly to health & safety procedures and maintaining safe working practices, • Minimum 5 years’ hands-on experience in mechanical engineering, ideally within automation, materials handling, or similar systems, • Strong understanding of mechanical systems and pneumatics, • Confident ability to read and interpret mechanical engineering drawings, • Own set of practical engineering tools, • Full clean UK driving licence, • Strong problem-solving mindset with a practical, “can-do” approach, • Good communication skills and ability to work effectively within a team or independently

Based in the North Hampshire area, an opportunity has arisen for a Sales Support Engineer to join a well-established precision engineering business. Working within a busy commercial and engineering team, you will support sales activity, tooling coordination, and production planning to ensure customer requirements are delivered efficiently and accurately. Working closely with colleagues across sales, production engineering and quality, you will provide technical support, assist with quotations, and ensure all necessary tooling, documentation and processes are in place. This is a varied, hands-on role suited to someone with CNC machining awareness and a strong understanding of production engineering. As the Sales Support Engineer, you will be responsible for - • Supporting sales with the preparation of accurate customer quotations, • Creating parts, bills of materials and route plans within the ERP/MRP system, • Planning CNC machining operations, ensuring efficiency and best practice, • Liaising with production and engineering teams to support manufacturing activities, • Procuring tooling, jigs and fixtures from suppliers, • Raising purchase orders, works orders and subcontract documentation, • Gathering and analysing data for cost vs price and performance reporting, • Preparing reports and metrics for senior management, • Knowledge within CNC machining and production engineering, • Familiarisation within aerospace and ISO Quality standards, • Experience using ERP/MRP systems, • Monday - Friday 8am - 5pm with an early finish Fridays, • Salary up to £40,000p/a, • 25 days annual leave plus bank holidays, • Pension scheme and additional benefits ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

This is a hands‑on engineering role focused on solving complex design challenges across electrified vehicle systems. As Senior Mechanical Design Engineer, you will work across the full product lifecycle, contributing to innovative, production‑ready solutions within a fast‑moving and technically demanding environment. The Senior Mechanical Design Engineer will: • Design mechanical components and assemblies for electrified vehicle platforms., • Create and maintain CAD models, engineering drawings, DFMEAs, and DVP&R documentation., • Collaborate with cross‑functional teams to ensure designs meet functional and performance requirements., • Develop designs with consideration for manufacturability, cost, weight, and sustainability., • Manage multiple workstreams and delivering engineering tasks to agreed project timelines., • Perform design optimisation and validation activities using CAE tools such as FEA and CFD. The Senior Mechanical Design Engineer will have: • A degree in Mechanical Engineering or a related discipline., • Experience in mechanical design within automotive or similar engineering sectors., • Strong proficiency with CAD tools such as SolidWorks, Siemens NX, or equivalent., • Experience designing structural components including brackets, housings, mounts, or similar parts., • Exposure to CAE tools (FEA and/or CFD) for design validation and optimisation., • Strong problem‑solving ability, communication skills, and a collaborative team‑focused mindset. You’ll be involved in solving real engineering problems that directly influence how electrified vehicle systems are designed, built, and delivered into production. If you are interested in this opportunity, simply apply online and a member of our team will contact you to provide more details!

Engineer Technician | Mechanical & Automation Systems | Aldershot I'm recruiting for a hands-on Engineer Technician role with a well-established SME that designs and installs mechanical automated production systems for some of the leading retail and production companies across the UK and Europe. If you're a practical engineer who thrives in a positive, collaborative environment, this could be a great fit. The Role You'll be involved in the full mechanical build, setting, and commissioning of mechanical and automation machinery, working from 2D/3D CAD drawings and assembly schedules. Day-to-day tasks will include cutting and building aluminium extruded frames, conveyors and guarding, building and setting pneumatic systems and pipework, positioning and setting reed switches and sensors, and making adjustments ready for commissioning and software testing. On customer sites you'll work as part of a team, assisting with the unloading of vehicles and moving equipment into position, so a good level of physical fitness is important. You'll then build out equipment to drawings and site conditions, working through to fully completed and operational systems. You'll also attend service visits for maintenance, warranty work and breakdowns, using your experience to fault find, problem solve, and feed back issues, preparing service reports and communicating clearly with the office. The role is a mix of workshop-based work in Aldershot and customer site visits across the UK, with some overseas travel. This can sometimes mean staying away from home for two to three weeks depending on project locations. What You'll Need • 5+ years of hands-on mechanical engineering experience, • Full UK driving licence, • Strong knowledge of machine mechanics and pneumatics, • Ability to read and interpret 2D/3D mechanical drawings, • Experience with sensor setting, pneumatic pipework and automation machinery, • A problem-solving mindset with strong communication skills, • Full, clean driving licence, • Your own tool kit or at least some, • Must live within 30 miles of Aldershot The Package • £30,000 – £36,000 depending on experience, • Overtime available (~50 hrs/month) at enhanced rates (1.5x weekdays/Sat, 2x Sun) C£11K, • 22 days annual leave, • Salary review after 3 months, then annually, • Bonus scheme & company pension included This is a company with a genuine team culture where people enjoy coming to work. You'll be joining a friendly, supportive environment with real variety in the role and the chance to work on interesting, technically rewarding projects with some well-known clients. Our client is not able to offer visa sponsorship.

We’re looking for a Chassis & Body Structures Engineer to join our team and help design and develop a bonded aluminium spaceframe chassis for an exciting high‑performance vehicle programme. This role sits at the heart of vehicle engineering, working across the full lifecycle — from early concept through to validation — and collaborating closely with simulation, manufacturing and vehicle integration teams to deliver a lightweight, durable and exceptionally capable structure. What You’ll Be Doing: • Designing and developing aluminium BIW and chassis structures, • Applying vehicle dynamics principles to optimise handling and performance, • Managing component packaging within the vehicle architecture, • Integrating NVH considerations into structural design, • Creating and reviewing CAD models and engineering drawings, • Supporting and interpreting FEA / CFD for stiffness, weight and durability, • Performing fatigue and durability analysis using real‑world load cases, • Leading chassis validation and testing, including simulation correlation, • Ensuring compliance with safety, crashworthiness and regulatory standards, • Working cross‑functionally across design, test and manufacturing teams What We’re Looking For: • Degree in Mechanical, Automotive or related Engineering, • Experience in chassis, BIW or structural design (automotive or similar), • Knowledge of lightweight structures (aluminium preferred), • Strong understanding of vehicle dynamics and structural behaviour, • Proficiency in CAD, with exposure to FEA tools, • Familiarity with NVH, durability and validation processes, • Comfortable working in structured engineering environments, • Strong problem‑solving and communication skills

A global engineering consultancy is seeking Graduate Mechanical Design Engineers to join their team starting September 2026. This role provides hands-on experience on live projects, focusing on developing engineering designs and practical solutions.

As a Graduate Mechanical Design Engineer / CAD Engineer, you will work alongside experienced engineers and designers to support the delivery of mechanical design projects for industrial clients. We are launching a new graduate scheme and are looking for four Graduate Engineers to join us in Septembe

This hybrid role involves preparing design documentation and visualising PV systems using tools such as AutoCAD.

An aerospace manufacturing leader is seeking a Design Engineer – Cabin Interiors to develop and document the interior systems of large aircraft modifications.The successful candidate will work closely with global teams to ensure compliance with regulatory standards while employing CAD tools.A Bach

A recruitment agency is seeking a Senior Mechanical Design Engineer to address complex design challenges in electrified vehicle systems. A degree in Mechanical Engineering and experience in automotive design is required, along with strong CAD proficiency.

Principal Mechanical Design Engineer Complex Electro-Mechanical Systems Are you an experienced Mechanical Design Engineer ready to take the next step in your career? We are seeking a Principal Mechanical Design Engineer to lead the design and development of complex electro-mechanical systems for highly regulated markets. This is a senior, hands-on role offering technical ownership, leadership, and innovation opportunities. ---------------------------------------- About the Role As a Principal Mechanical Design Engineer , you will: Lead the design, development, and documentation of complex electro-mechanical systems Take technical ownership of projects from concept through to production, testing, and commissioning Mentor and guide junior engineers, providing leadership across multidisciplinary teams Collaborate closely with electrical, software, and systems engineers to deliver integrated and compliant solutions Support continuous improvement initiatives and provide innovative solutions for challenging design problems As part of the Mechanical Design team, the Principal Mechanical Design Engineer will provide technical direction for mechanical engineering activities across assigned projects and major work packages, ensuring robust engineering decisions, effective cross-functional delivery, and successful progression through the gated development process. This role combines deep engineering capability with strong delivery leadership. The Principal Mechanical Design Engineer will lead complex problem resolution, guide mechanical decision-making, coordinate technical activities with minimal intervention, and act as a key interface between Mechanical Design and other business functions, suppliers and customers. They will also support and mentor other engineers across the business. The ideal candidate will have significant experience designing complex moving mechanical systems, such as gearboxes, actuators, powertrain systems, rotating machinery, or turbomachinery, bringing proven expertise in tackling high-complexity mechanical challenges. ---------------------------------------- Key Responsibilities of a Principal Mechanical Design Engineer Deliver robust mechanical designs for electro-mechanical systems used in high-regulated environments. E.g motors, powertrain, EV Systems Produce CAD models, detailed drawings, and Bills of Materials (BOMs) using SolidWorks Conduct design reviews, risk assessments, and technical validation Manage and optimise design for manufacturability (DfM) and assembly (DfA) Liaise with suppliers and manufacturing teams to ensure designs are practical, cost-effective, and compliant Provide leadership and mentorship to design and engineering teams, fostering technical excellence ---------------------------------------- Skills & Experience of a Principal Mechanical Design Engineer Degree-qualified in Mechanical Engineering or related discipline Extensive experience in mechanical design of complex electro-mechanical systems Proven experience designing complex moving mechanical systems (gearboxes, actuators, powertrain systems, rotating machinery, turbomachinery) Strong SolidWorks expertise and CAD modelling capabilities Proven experience in high-regulated markets, e.g., automotive, aerospace, or defence Strong understanding of mechanical components, assemblies, tolerance stack-ups, and manufacturing methods Demonstrated leadership and ability to mentor junior engineers Excellent problem-solving, communication, and organisational skills ---------------------------------------- Why Apply? Take ownership of high-impact, technically challenging projects Lead and shape the work of a growing, innovative engineering team Work in an environment that values innovation, quality, and professional growth Opportunity to make a real difference in complex, cutting-edge product development ---------------------------------------- If you are an experienced Principal Mechanical Design Engineer with a strong track record designing complex electro-mechanical and moving mechanical systems, we want to hear from you. TPBN1_UKTJ

The Redline Group is working in partnership with a specialist engineering organisation to support their search for a Contract Mechanical Design Engineer for an initial 3 month contract, working to deliver a key product development programme. We are looking for someone who is available to start as soon as possible and can be onsite full time in Camberley, Surrey. Unrivalled in their field, our customer is responsible for some of the most technically advanced defence products on the market. They have been an industry-renowned name for many years, with a reputation for intrinsically safe electronics. As a result of growth and major project wins, they are seeking the skills of a professional contractor to help them get the next generation of their product out to market both on time and in budget. The successful Contract Mechanical Design Engineer will be responsible for redesigning 3D CAD models and updating engineering drawings, along with updates and amendments to existing drawings and associated Bill of Materials (BOMs). Key Skills Required - Contract Mechanical Design Engineer: Strong experience using PTC Creo Direct Modelling for 3D CAD and engineering drawings Proven ability to produce and maintain fully traceable design documentation (BOMs, specifications, test plans, ECRs) Experience working to BS 8888 standards, including GD&T Knowledge of international engineering standards British citizenship required Desirable Experience: Experience within safety critical industries such as nuclear, defence or oil & gas Design for manufacture and assembly (DFM / DFA) Experience with design reviews, FMEA and configuration management This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC. For more information or to apply for the Contract Mechanical design Engineer based in Camberley, please contact Maddie - (url removed) / (phone number removed) quoting reference MMR1062

Engineer Technician | Mechanical & Automation Systems | Aldershot I'm recruiting for a hands-on Engineer Technician role with a well-established SME that designs and installs mechanical automated production systems for some of the leading retail and production companies across the UK and Europe. If you're a practical engineer who thrives in a positive, collaborative environment, this could be a great fit. The Role You'll be involved in the full mechanical build, setting, and commissioning of conveyor and automation machinery, working from 2D/3D CAD drawings and assembly schedules. Day-to-day tasks will include cutting and building aluminium extruded frames, conveyors and guarding, building and setting pneumatic systems and pipework, positioning and setting reed switches and sensors, and making adjustments ready for commissioning and software testing. On customer sites you'll work as part of a team, assisting with the unloading of vehicles and moving equipment into position, so a good level of physical fitness is important. You'll then build out equipment to drawings and site conditions, working through to fully completed and operational systems. You'll also attend service visits for maintenance, warranty work and breakdowns, using your experience to fault find, problem solve, and feed back issues, preparing service reports and communicating clearly with the office. The role is a mix of workshop-based work in Aldershot and customer site visits across the UK, with some overseas travel. This can involve staying away from home for two to three weeks on ocassion depending on project locations. What You'll Need • 5+ years of hands-on mechanical engineering experience, • Full UK driving licence, • Strong knowledge of machine mechanics and pneumatics, • Ability to read and interpret 2D/3D mechanical drawings, • Experience with sensor setting, pneumatic pipework and automation machinery, • A problem-solving mindset with strong communication skills, • Full, clean driving licence, • Your own tool kit or at least some, • Must live within 30 miles of Aldershot The Package • £30,000 – £36,000 depending on experience, • Overtime available (~50 hrs/month) at enhanced rates (1.5x weekdays/Sat, 2x Sun), • 22 days annual leave, • Salary review after 3 months, then annually, • Bonus scheme & company pension included This is a company with a genuine team culture where people enjoy coming to work. You'll be joining a friendly, supportive environment with real variety in the role and the chance to work on interesting, technically rewarding projects with some well-known clients. Our client is not able to offer visa sponsorship

As Senior Chassis Engineer, you will focus on the design and development of a bonded aluminium spaceframe chassis, working across concept, optimisation, and validation to deliver a lightweight, durable, and high‑quality vehicle platform. The Senior Chassis Engineer will: Design and develop aluminium chassis and Body‑in‑White structures. Ensure effective component packaging within overall vehicle architecture. Integrate NVH requirements into chassis and structural design solutions. Create and review CAD models, engineering drawings, and design documentation. Support FEA and CFD activities to optimise weight, stiffness, fatigue, and durability. Lead and support chassis validation and testing activities, including correlation with simulation results. The Senior Chassis Engineer will have: A degree in Mechanical, Automotive, or a related engineering discipline. Proven experience in chassis, BIW, or structural design within automotive or similar industries. Strong knowledge of lightweight structures, ideally aluminium spaceframes and bonded architectures. Proficiency in CAD tools and experience working with FEA analysis environments. Experience with NVH, durability, validation, and test correlation activities. Strong problem‑solving, communication, and documentation skills within structured engineering programmes. This role allows you to contribute directly to a high‑performance vehicle programme through hands‑on engineering and cross‑functional collaboration. To apply or find out more, please submit your CV online and we will be in touch

Mechanical Design Engineer - Special Purpose Machinery £40,000 - £48,000 + Flexitime + Overtime (At 1.5x Pay)+ Training + Benefits Monday - Friday, 37.5 Hours Aldershot - Commutable From: Farnborough, Farnham, Guildford & Woking Do you have mechanical design experience within a machinery, engineering or manufacturing environment? Are you looking for an exciting new role within a leading bespoke machinery manufacturer who are offering overtime to increase your earnings, first class training and excellent development opportunities? Due to continued growth, my client is looking for a design engineer to join the team, working out of their state of the art facility near Aldershot. The successful applicant will get the chance to work on extremely exciting projects for customers worldwide wide, liaising with the design, projects and manufacturing teams. You will be designing bespoke, special purpose machinery for customers across the globe, servicing a range of industries such as; aerospace, rail & medical. You will be joining a growing & experienced design team and will play a vital role within the business and will gain exposure to one off projects, progression paths and new sectors. In this varied role your responibilites will also include managing machine build projects and working with the shop floor teams to ensure that all designs and customer requirements are adhered to. You will be working for an expanding business who have been at the forefront of their industry for over 25 years! Specializing in full concept to completion for customers from in house design and manufacturing to providing full turnkey installations, service and company product training. This is an exciting time to gain access to excellent company training, development opportunities and a varied role within a business who pride themselves on staff retention. For more information please click apply and contact Patrick Walsh - REF4950 - (phone number removed) The Role: *Managing a variety of designs for manufacturing projects *Using Solidworks *Designing bespoke, special purpose machinery The Candidate: *Mechanical design experience within a manufacturing or engineering environment *3D and SolidWorks experience *A commutable distance to Aldershot elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. SPM|Aerospace|Machinery|Special Machinery|Bespoke|Design Engineer|Project Engineer|Inventor|Special Purpose|CAD Technician|Mechanical Engineer|AutoCAD|Solidworks|Junior||Manufacturing|Manufacturer|Manufactured|Engineering|Engineered|Training|Development|Progression|Aldershot|Woking|Farnborough|Farnham|Guildford|Hampshire

M&E Design Engineer Location: South East (Hampshire) Sector: Renewable Energy and Mechanical & Electrical Building Services Employment Type: Full-Time, Permanent Salary: Competitive, negotiable depending on experience About the Company Our client is an established renewable energy and mechanical services contractor with over 20 years of experience delivering high-quality solutions across the mechanical and renewable energy sectors. The business specialises in commercial projects typically valued between £2–£3 million, working closely with contractors, consultants, and clients to deliver efficient and sustainable building services solutions. Due to continued growth, our client is seeking a motivated M&E Design Engineer to join their team in the South East. Role Overview The M&E Design Engineer will support the design and development of mechanical and electrical building services systems across a range of commercial renewable and energy efficiency projects. This role would suit someone early in their career who is looking to develop their technical skills within a supportive and experienced team. Our client is also open to considering an Electrical Engineer who would be willing to assist with mechanical-related design work during quieter periods on the electrical side of the business. Key Responsibilities Assist in the design and development of mechanical and electrical building services systems for commercial projects Support the preparation of technical drawings, schematics, and documentation Work with senior engineers to develop HVAC and renewable energy system designs Coordinate with project teams, contractors, and clients where required Ensure designs meet current regulations, standards, and project specifications Contribute to project delivery from concept through to construction stages Requirements Degree or diploma in Mechanical, Electrical, or Building Services Engineering Minimum 1–2 years of experience working with contractors or design consultants Basic understanding of HVAC systems and building services Experience using CAD software would be advantageous Strong communication and organisational skills Willingness to learn and develop within the renewable energy and building services sector What's on Offer Competitive salary, negotiable depending on experience Paid holiday Company pension scheme Hybrid working options Opportunity to develop within a growing renewable energy company #INDPERM

Overview An excellent opportunity for an experienced HVAC Engineer seeking to transition away from hands-on fieldwork into a technical, coordination-focused position. This newly created role supports senior leadership and field engineers, with a strong emphasis on technical problem-solving, operational efficiency, and high-quality project delivery. You will act as a key technical link across multiple projects, supporting complex HVAC installations, improving internal processes, and ensuring smooth delivery from design through to commissioning. Key Responsibilities Technical Support • Provide remote diagnostics and technical support to field engineers, • Troubleshoot complex HVAC system faults across VRV/VRF, multi-split, and ventilation systems, • Act as the central technical point of contact for project teams Design & Quotation Support • Produce basic HVAC system designs and support more complex project designs, • Carry out heat loss and related technical calculations, • Liaise with manufacturers to confirm technical specifications and system suitability Procurement & Logistics • Order HVAC equipment, components, and materials, • Manage supplier relationships, lead times, and warranty claims, • Coordinate timely delivery of materials to site to support project schedules Compliance & Documentation • Lead F-Gas compliance activities, including logbooks, inspections, and audits, • Produce RAMS (Risk Assessments and Method Statements), • Maintain O&M manuals, commissioning documentation, and CAD drawings Customer & Project Coordination • Support clients from initial enquiry through to project completion, • Maintain strong, professional client relationships, • Conduct site surveys and provide on-site technical support when required Candidate Profile • Proven experience within the HVAC industry (air conditioning and ventilation systems essential), • Strong diagnostic, fault-finding, and problem-solving abilities, • Experience with VRV/VRF, multi-split, and ventilation systems, • Highly organised with strong attention to detail, • Commercially aware with a strong customer service mindset Essential Requirements • Relevant HVAC qualification (e.g. F-Gas certification, NVQ Level 2/3 or equivalent), • Proficient in Microsoft Office and job management systems, • Full UK Driving Licence

Design & Project Engineer-Perm-Camberley-£45-£50k A leading engineering organisation is seeking a skilled and motivated Design & Project Engineer to join their growing team. This is a great opportunity to work in a fast-paced environment, delivering projects across specialised industrial sectors. Key responsibilities of the Design & Project Engineer - • Produce detailed engineering designs, drawings, and specifications for pipework, pump systems, and associated equipment., • Work collaboratively with senior engineers and internal teams to deliver high-quality solutions., • Manage projects from initial enquiry through design, procurement, installation, and commissioning., • Liaise with clients, suppliers, and internal teams to ensure project requirements and timelines are met., • Prepare technical documentation, including calculations, reports, and project plans., • Support cost estimation, budgeting, and procurement of materials and equipment., • Conduct site visits to oversee installation, troubleshoot issues, and ensure compliance with design intent., • Ensure all work meets relevant industry standards, quality expectations, and health & safety requirements. Requirements of the Design & Project Engineer - • Proven experience in a design/project engineering role within fluid handling, water, or process industries., • Strong knowledge of pumps, pipework systems, and mechanical equipment., • Proficiency in CAD software, ideally Inventor., • Experience using Autodesk Vault for document control and revision management., • Ability to produce and interpret P&IDs, GA drawings, and fabrication details., • Understanding of materials, stress considerations, and system layouts within process environments., • Good grasp of project delivery, cost control, and scheduling., • Strong communication and stakeholder management skills., • Organised, self-motivated, and capable of managing multiple projects. Benefits to the Design & Project Engineer - • Competitive salary and benefits package, • Career progression and professional development opportunities, • Diverse and technically engaging projects, • Supportive and collaborative working environment Please get in touch if this role sounds like a good match to your skillset

Senior Mechanical Engineer -Perm -Camberley -£50k-£65k Our well-established engineering client is seeking a Senior Mechanical Engineer to join its team. This is a broad, hands-on role combining design, project delivery, and cross-functional coordination across engineering, production, sales, and external stakeholders. Reporting to the Engineering Manager, you will take ownership of projects from initial specification through to delivery, ensuring high engineering standards, cost control, and timely execution. Key Responsibilities of the Senior Mechanical Engineer • Lead full lifecycle delivery of engineered systems, from design through to dispatch and commissioning., • Work with customers to define specifications, prepare quotations, and support commercial activities., • Produce fabrication/manufacturing drawings and specify components and suppliers., • Manage subcontractors and procurement activities, including raising purchase orders., • Develop inspection and test plans, carry out final inspections, and support system testing., • Maintain project cost tracking to protect margins., • Support shipping processes and ensure all documentation is accurate and delivered on time., • Contribute to commissioning activities, including occasional site visits (UK and international)., • Ensure compliance with relevant standards (including CE, ATEX, PED) and good engineering practice., • Support new product development and continuous improvement initiatives., • Provide technical support across the business and mentor junior engineering staff. Requirements of the Senior Mechanical Engineer • Degree-qualified in Mechanical Engineering (or equivalent), with ambitions toward Chartered status., • Proven experience in a manufacturing or systems-based engineering environment., • Strong background in piping systems, flow/pressure characteristics, and fuel-related systems (desirable)., • Knowledge of pumps, valves, metering, and filtration systems advantageous., • Commercially aware, with experience managing costs and delivering profitable projects., • Proficient in 3D CAD (e.g. Autodesk Inventor); experience with PDM systems beneficial., • Strong communication skills and ability to manage changing priorities., • Familiarity with engineering compliance standards (CE, ATEX, PED)., • Full UK driving licence required. Package & Benefits to the Senior Mechanical Engineer • Competitive salary (dependent on experience)., • Employer pension contribution., • Performance-related bonus., • Ongoing training and development., • 25 days holiday. Please apply today if this sounds like a suitable match

This is a hands‑on engineering role focused on solving complex design challenges across electrified vehicle systems. As Senior Mechanical Design Engineer, you will work across the full product lifecycle, contributing to innovative, production‑ready solutions within a fast‑moving and technically demanding environment. The Senior Mechanical Design Engineer will: Design mechanical components and assemblies for electrified vehicle platforms. Create and maintain CAD models, engineering drawings, DFMEAs, and DVP&R documentation. Collaborate with cross‑functional teams to ensure designs meet functional and performance requirements. Develop designs with consideration for manufacturability, cost, weight, and sustainability. Manage multiple workstreams and delivering engineering tasks to agreed project timelines. Perform design optimisation and validation activities using CAE tools such as FEA and CFD. The Senior Mechanical Design Engineer will have: A degree in Mechanical Engineering or a related discipline. Experience in mechanical design within automotive or similar engineering sectors. Strong proficiency with CAD tools such as SolidWorks, Siemens NX, or equivalent. Experience designing structural components including brackets, housings, mounts, or similar parts. Exposure to CAE tools (FEA and/or CFD) for design validation and optimisation. Strong problem‑solving ability, communication skills, and a collaborative team‑focused mindset. You'll be involved in solving real engineering problems that directly influence how electrified vehicle systems are designed, built, and delivered into production. If you are interested in this opportunity, simply apply online and a member of our team will contact you to provide more details

Senior Design Engineer A specialist engineering manufacturer supplying safety-critical equipment is seeking a Senior Design Engineer to lead the mechanical design of regulated products from concept through to production and testing. This is a senior, hands-on role working to published standards and internal design processes. Key Responsibilities * Design and develop mechanical products for safety-critical applications * Produce detailed CAD models and manufacturing drawings * Support product testing, validation, and technical documentation * Liaise with customers, suppliers, and external test houses * Manage external design and test resources where required * Support products through manufacture and into service Requirements * Strong background in mechanical design engineering * Experience taking products from concept through to production (NPI) * Proficiency in CAD (CREO/ProE or similar) * Experience with manufacturing processes such as injection moulding, rubber moulding, machining, and fabrication * Familiarity with DFM, DFMEA, and design control processes * Comfortable working in regulated or safety-critical environments Desirable * Experience with pneumatics, instrumentation, or test fixtures * Surface modelling experience * Experience using CAD data management systems Personal Attributes * Detail-focused, technically rigorous, and organised * Able to manage multiple priorities and projects * Confident communicating with customers, suppliers, and regulators

Important: Must have sole British Nationality (due to UK eyes-only projects), and have, or be capable of obtaining, UK security clearance (SC) Benefits: Full company benefits, flexible working and some remote working potentials. - We are looking a Hardware Engineer who can operate in a fast-paced environment as part of a multi-disciplined team across all aspects of standard and bespoke secure digital design solutions to join one of our major defence clients. As a Hardware Engineer on the team, you will be involved in all aspects of a challenging and rewarding engineering role covering design, test, production support and customer unit evaluation and commissioning. - Key Responsibilities: Ownership of the design and delivery of hardware throughout the development lifecycle Specification and design of high-speed digital boards for products and test equipment Design, build and test of development and production test equipment Schematic capture and support of PCB layout Co-ordinate design with Mechanical, Software and System engineers Hardware design proving testing Support to software and system testing Production of development and production test processes and procedures. Support to manufacturing, resolving test and production issues, training production staff Resolution of design, obsolescence and production issues on existing products Integration of Data At Rest products into customer platforms In addition, from time to time, you may be asked to undertake other tasks and responsibilities not covered above in order to achieve project or business objectives. Experience needed: Full development life-cycle experience Excellent understanding of electronic design fundamentals, high speed digital design and signal integrity Proven track record of digital circuit development Adept with hardware testing and troubleshooting using oscilloscopes, logic analysers, power supplies and multi-meters. Proficient with industry standard CAD toolsets (e.g. Cadence or Mentor Schematic & Layout Tools) Degree in Electronic Engineering or similar discipline Must be a UK national and have or, be capable of obtaining, UK security clearance Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience supporting production Design for Test (DFT) and Design for Manufacture (DFM) methodologies and techniques Embedded firmware design (C/C++/assembler/Python). Software design for test and test equipment development Writing test specifications and carrying out HW and system testing - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Details: Join a Global communications company, where the innovations have helped shape how consumers, businesses, governments, and militaries around the world communicate! - even in the hardest-to-reach places! The company are growing rapidly and looking for passionate, innovative professionals to join the team. You'll work in a collaborative and inclusive environment that values diverse perspectives and continuous learning. Technology Innovators Awards Gold Honoree | 2021 Glassdoor's 2022 Best Places to Work for U.S. Large Employers List! • For full information, please get in touch

Based in the North Hampshire area, an opportunity has arisen for a Sales Support Engineer to join a well-established precision engineering business. Working within a busy commercial and engineering team, you will support sales activity, tooling coordination, and production planning to ensure customer requirements are delivered efficiently and accurately. Working closely with colleagues across sales, production engineering and quality, you will provide technical support, assist with quotations, and ensure all necessary tooling, documentation and processes are in place. This is a varied, hands-on role suited to someone with CNC machining awareness and a strong understanding of production engineering. As the Sales Support Engineer, you will be responsible for - Supporting sales with the preparation of accurate customer quotations Creating parts, bills of materials and route plans within the ERP/MRP system Planning CNC machining operations, ensuring efficiency and best practice Liaising with production and engineering teams to support manufacturing activities Procuring tooling, jigs and fixtures from suppliers Raising purchase orders, works orders and subcontract documentation Gathering and analysing data for cost vs price and performance reporting Preparing reports and metrics for senior management Supporting general operations across sales and engineering as requiredIdeally you will have the following skills & experience - Knowledge within CNC machining and production engineering Familiarisation within aerospace and ISO Quality standards Experience using ERP/MRP systems Experience with CAD (desirable) On offer for this Sales Support Engineer role - Monday - Friday 8am - 5pm with an early finish Fridays Salary up to £40,000p/a 25 days annual leave plus bank holidays Pension scheme and additional benefits Ongoing training and development opportunitiesIf you are a technically minded individual with CNC experience looking to move into a commercially focused engineering role, please apply. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity

An exciting opportunity has arisen for an experienced Hardware Engineer to join a fast-paced, multi-disciplinary team designing and delivering secure digital hardware solutions. This is a hands-on role covering the full development lifecycle, from concept and design through to testing, production support, and customer integration. What You’ll Do Take ownership of hardware design and delivery across the entire product lifecycle. Specify and design high-speed digital boards for products and test equipment. Create, build, and test development and production test equipment. Capture schematics and support PCB layout activities. Collaborate closely with Mechanical, Software, and Systems engineers to ensure seamless integration. Perform hardware design verification and support system/software testing. Produce development and production test processes and documentation. Provide production support, including resolving test and manufacturing issues and training production staff. Address design changes, component obsolescence, and integration of secure data products into customer platforms. What We’re Looking For Degree in Electronic Engineering or a related discipline. Full hardware development lifecycle experience with a strong grasp of electronic design fundamentals. Proven track record in high-speed digital circuit development and signal integrity. Skilled in hardware testing and troubleshooting using oscilloscopes, logic analysers, and similar tools. Proficiency with industry-standard CAD tools (e.g., Cadence or Mentor schematic/layout). Must be a UK national and able to obtain UK Security Clearance (SC). This is a fantastic opportunity to work on innovative, secure hardware technologies, contributing to projects with real-world impact while developing your expertise in a collaborative and forward-thinking engineering environment. TT

Qualifications and skills required for the EDS 3D CAD Engineer include:. If you are interested in applying for the role of EDS 3D CAD Engineer or require further information, please contact:. Do you have a background in EDS 3D CAD Engineering?.

CAD support using Autodesk Inventor, working closely with engineering and project teams to develop equipment solutions that meet manufacturing process requirements. Key responsibilities include producing and reviewing mechanical CAD models, presenting design concepts and outputs at design and proces

Job title: Project Engineer Reverse Acquisition & CAD Industry: Wireless Telecommunications (Transmission) Reports to: Programme Manager Location: Full Time office based in Bracknell, Berkshire Employment Type: 40 hours per week, Monday to Friday About the Role We are seeking an experie

They are now seeking a skilled and experienced CAD Engineer to join their trusted and successful business. To assist with the production of CSV notching files by manually extracting applicable data from live drawings using bespoke software built into AutoCAD. THE CANDIDATE : Good knowledge of AutoCA

A key engineering recruitment firm in Greenwich is seeking an experienced Mechanical Design Engineer to lead the design and validation of tooling for new submerged products. The ideal candidate should have a degree in Mechanical or Manufacturing Engineering and strong CAD tooling expertise.

Sky is looking for a Prototyping Specialist based at their Osterley campus in Greater London.The role demands crafting models using both traditional and digital tools, alongside designing prototypes with microcontrollers.Ideal candidates should possess strong problem-solving skills and experience in

An electrical manufacturing company in the UK seeks a motivated Electrical Project Engineer to manage projects from sale through to final sign-off. Responsibilities include reviewing project handovers, producing electrical schematics using AutoCAD, and coordinating with clients and internal teams.

A leading consultancy firm in the UK seeks a Technical Design Engineer (CAD Tooling) for a 6-month contract. Candidates should have a relevant engineering degree and experience with Creo CAD.

Supporting Senior Engineer/Team Leader with the development of designs using Civil3D and AutoCAD. Adept in the use of AutoCAD and aptitude to further develop in Civils3D/GIS including the use of BIM. We are one of the world's leading engineering and professional services firms.

The role focuses on designing marine assets and technical systems, requiring a degree in Mechanical or Electrical Engineering and proficiency in 3D CAD software like SolidWorks. A marine engineering consultancy is seeking a Design Engineer (Mechanical/Electrical) in the UK.

A leading engineering recruitment agency in the United Kingdom is seeking a Layout Engineer for a contract role near Coventry. The ideal candidate should have proficiency in 2D CAD software and a deep understanding of manufacturing environments. Responsibilities include managing CAD layouts, support

An interest/experience in Engineering/Design/CAD/CATIA V5/Powertrain/Chassis/Body. We are currently looking for a Graduate Automotive Engineer to join our fast and growing engineering team based onsite in Woking, Surrey. Liaising with other Engineers and CAD group.

The ideal candidate will have a strong interest in CAD/BIM and computational geometry. This position emphasizes tackling technical challenges within a BIM platform for architects and engineers. The role is full-time, focusing on engineering within the construction and software development sectors.

A design and engineering consultancy is seeking a Graduate Automotive Engineer to join its team in Woking, England. The role involves developing concepts, designing components, and collaborating with various engineering teams. Candidates should hold a 2:1 degree or above in Engineering or a related

Candidates should have a relevant engineering diploma and experience with CAD tools like AutoCAD and PLS-CADD. This full-time, hybrid role involves producing detailed CAD drawings and collaborating with engineers on overhead transmission line projects. AECOM is looking for an experienced engineer to

A leading engineering firm in Derby is seeking a Senior Design Engineer to enhance their design capability. The role involves designing innovative engineering products, using CAD, and mentoring junior team members. Candidates must have experience in a similar role, proficiency in 3D CAD software, an

A well-established UK-based engineering business is seeking a Mechanical Design Engineer to design components and products while supporting ongoing development. The role involves creating detailed 3D CAD models, manufacturing drawings, and maintaining technical documentation. Candidates should be pr

Communicate design and liaise with engineers to ensure information is interpreted accurately. Background in mechanical engineering is preferable and experience in the food industry would be advantageous. Knowledge of job costings, materials/engineering methods.

Stratasys Ltd is hiring an Associate Software Engineer in Cambridge, UK, to work in a hybrid environment. The role involves providing technical vision, mentoring engineers, and designing software features using technologies like React and TypeScript. Candidates should hold a BSc or BA in a relevant

A cutting-edge tech company based in London is seeking an experienced engineer to take on a hands-on role in developing AI-powered software solutions.

Anduril Industries in Greater London is seeking a professional with over 5 years of experience in engineering software tools like PLM and CAD. The ideal candidate will collaborate with engineering partners to develop solutions, provide user training, and support software enhancements in a fast-paced

Roc Search Europe Limited is seeking an HVAC CAD Engineer in Peterborough. Candidates should have strong AutoCAD experience and the ability to conduct site surveys. This hybrid role combines AutoCAD design and on-site surveying.