Cost engineer jobs in MiddlesbroughCreate job alerts

New opportunity to join one of the UK's leading independent bulk liquid storage providers, operating four strategically located terminals across the country. The Company supports a wide range of sectors including chemicals, petroleum, gases, bitumen, and emerging energy markets such as hydrogen, sustainable aviation fuel (SAF) and carbon capture. As a key part of the UK's critical national infrastructure, Navigator is committed to safe operations, exceptional customer service, and ongoing investment to support future growth and the energy transition. A vacancy now exists for an Electrical Engineering to join the team. Negotiable Salary + Bonus + Private Healthcare The roleYou will be a Subject Matter Expert for electrical systems and equipment, ensuring safe and reliable operation of our client's electrical systems and electrical assets. Provide technical support, leadership and guidance to projects, operations, and maintenance. Take responsibility for electrical aspects of projects & modifications, developing and reviewing designs and specifications for new electrical systems and equipment. Key Accountabilities: • Responsible for implementation of the companies Electrical Safety Rules and review as required in line with changes in legislation and industry best practise., • Designated Electrical Competent Person under Electricity at Work Regulations for all Navigator terminals. Authorising Engineer., • Competency assessment of site electricians and contractors' electricians., • Specification, budgeting and scheduling of electrical inspection and preventative maintenance, including HV / LV and ATEX routines to ensure reliable, safe and reliable operation., • Development of HV switching programs, • Responsible for the application of appropriate electrical engineering codes and standards and management of any deviations from standards., • Technical review of designs undertaken by Navigator engineers and design houses., • Prepare cost estimates and business case proposals for electrical equipment/system CAPEX. Required Skills, Qualifications & Experience: • Degree educated in Electrical Engineering, • Chartered Engineer Status or working towards Chartership, • Experience managing design/installation/commissioning and maintenance of electrical systems on a COMAH site, preferably in the bulk liquid storage sector, • Significant electrical system design experience, load lists, SLDs, cable sizing, fault level, protection grading studies and motor starting calculations. Lightning protection calculations., • Specification of equipment for installation in Hazardous areas, • Risk Assessment, • Site Commissioning and Troubleshooting experience, • Experience as designated competent person under Electricity at Work Regulations. Experience in roles such as: Authorised Person, Senior Authorised Person, Control Engineer and Authorising Engineer, • Experience in managing ageing assets, • Experience in training and mentoring site electricians, • CompEx Ex01 - 04, • CompEx Design (Ex12), parts A & B

Our clientOur client is a well-established manufacturer based in the North East, designing and producing complex, high-reliability products used in safety-critical and regulated environments. The business operates globally and works across a diverse mix of markets, including defence, industrial and emerging technology applications.The organisation is experiencing sustained growth, investing heavily in new facilities, people and product development. Historically engineering-led, the business has made a deliberate shift towards stronger project governance and delivery, creating a collaborative, empowered projects function that plays a central role in commercial success.The culture is open, hands-on and people-focused, with a strong track record of developing talent internally and supporting long-term careers.The opportunityThis is an excellent opportunity to join a growing projects team as a Project Manager, delivering a varied portfolio of engineering-led projects from initial concept through to production and customer delivery.You will manage multiple projects concurrently, including both internally funded new product introductions and externally funded, customer-specific development programmes. Projects vary significantly in size, complexity and duration, providing genuine variety and exposure across the full product lifecycle.Working cross-functionally with engineering, manufacturing, supply chain and commercial teams, you will take ownership for planning, governance, risk, budget and stakeholder management. For customer-funded projects, you will act as the primary point of contact, managing expectations and ensuring delivery against time, cost and quality commitments.This role suits someone who enjoys being close to the detail, building strong relationships and seeing projects through to completion in a practical, delivery-focused environment. The business offers a hybrid working model, with regular on-site collaboration viewed as key to project success.About youYou will be a Project Manager or Project Engineer ready to step up, with experience in an engineering, manufacturing or technology-led environment. Rather than a rigid background, our client is focused on attitude, behaviours and potential.Key requirements include: • Experience delivering projects in an engineering or manufacturing setting, • Exposure to new product introduction (NPI), design-led development and/or introduction to manufacture, • Strong stakeholder management skills, able to influence across multiple functions without direct authority, • A practical, solutions-focused approach with the resilience and tenacity to drive long-running projects to completion, • Excellent communication skills, comfortable engaging with shop-floor teams, senior leadership, suppliers and customers, • Formal project management qualification (or a clear aspiration to achieve one), with full support provided for developmentYou will thrive in a collaborative, open environment where projects are still evolving, and where success is built on trust, relationships and delivery rather than bureaucracy.If you’re looking for a role where you can develop your project management career, gain exposure to complex engineering programmes and be part of a growing North East manufacturer with ambitious long-term plans, we’d love to hear from you.Apply now or contact us for a confidential discussion to find out more.

Zenith are working with our client who are one of the worlds leading manufacturers and are looking to welcome a Multi Skilled Shift Engineer on a permanent basis. This is an exciting opportunity to join a dynamic team focused on delivering world class products. The Opportunity To ensure swift resolution of any Plant breakdowns on site. To assist the Engineering Manager in the completion of the Site PPM Schedule on a daily, weekly and annual basis. This permanent position will report to Engineering Manager. • Nothing is so important that it can’t be done safely; the welfare of your colleagues is paramount and you must promote and support a safe working environment and foster a culture of “safety first”., • Maintaining the integrity of our products and therefore the business itself is an absolute., • You must ensure this is always the case as we never knowingly compromise product safety., • Never knowingly compromise on quality; pursue Customer Fixation and show Passion by striving for the highest possible standards of quality in our products, people and plant., • You must Develop the Best in your people to ensure our success in achieving customer, business and individual targets, whilst building a Sense of Fun in to what we do., • Good quality communications at the right time will ensure the highest standards of Teamwork from all your colleagues within the business and make certain we are all pulling together in the right direction., • You must maintain a structured approach to the delivery of the production plan and the business targets as second chances to get it right are rare., • Achieving required output with minimum wasted effort, time and expense; meet standards consistently to achieve the cost base to continue our growth and drive world class Performance, whilst always striving to Find a Better Way. Qualification & Experience Requirements • Electrical and/or mechanical qualifications/time served apprenticeship., • 2 Years’ experience of working in an automated production environment., • A good standard of both written and oral English., • Previous food processing industry experience desirable., • Basic Food Hygiene, • Basic Health & Safety, • Data and analytical skills, • Computer literate (word/excel/windows based packages), • Desirable skills: PLC’s, pneumatics, hydraulics, temperature control, instrumentation, welding. What’s On Offer The opportunity to develop your career on a global stage, continuous learning through an on-demand learning platform, and a competitive compensation package including staff discounts, generous family leave policy, health plan, pension. Shift • 4 on 4 off shift pattern

New opportunity to join one of the UK’s leading independent bulk liquid storage providers, operating four strategically located terminals across the country. The Company supports a wide range of sectors including chemicals, petroleum, gases, bitumen, and emerging energy markets such as hydrogen, sustainable aviation fuel (SAF) and carbon capture. As a key part of the UK’s critical national infrastructure, Navigator is committed to safe operations, exceptional customer service, and ongoing investment to support future growth and the energy transition. A vacancy now exists for an Electrical Engineering to join the team. Negotiable Salary + Bonus + Private Healthcare The role You will be a Subject Matter Expert for electrical systems and equipment, ensuring safe and reliable operation of our client's electrical systems and electrical assets. Provide technical support, leadership and guidance to projects, operations, and maintenance. Take responsibility for electrical aspects of projects & modifications, developing and reviewing designs and specifications for new electrical systems and equipment. Key Accountabilities: • Responsible for implementation of the companies Electrical Safety Rules and review as required in line with changes in legislation and industry best practise., • Designated Electrical Competent Person under Electricity at Work Regulations for all Navigator terminals. Authorising Engineer., • Competency assessment of site electricians and contractors’ electricians., • Specification, budgeting and scheduling of electrical inspection and preventative maintenance, including HV / LV and ATEX routines to ensure reliable, safe and reliable operation., • Development of HV switching programs, • Responsible for the application of appropriate electrical engineering codes and standards and management of any deviations from standards., • Technical review of designs undertaken by Navigator engineers and design houses., • Prepare cost estimates and business case proposals for electrical equipment/system CAPEX., • Responsible for OPEX and CAPEX budgets Site Electrical Equipment includes: Power Transformers, HV/LV Switchgear Air, Vacuum and Oil, HV/LV distribution, tripping batteries, transformer rectifier units, ATEX and FLP Motors, Motor Starters, HV / LV VSDs, Soft Starts, UPSs, lighting, trace heating, industrial immersion heaters, HVAC, Hazardous Area Cabling/Containment/Junction Boxes, Lightning Protection Systems and Earthing and Bonding Systems. Required Skills, Qualifications & Experience: • Degree educated in Electrical Engineering, • Chartered Engineer Status or working towards Chartership, • Experience managing design/installation/commissioning and maintenance of electrical systems on a COMAH site, preferably in the bulk liquid storage sector, • Significant electrical system design experience, load lists, SLDs, cable sizing, fault level, protection grading studies and motor starting calculations. Lightning protection calculations., • Specification of equipment for installation in Hazardous areas, • Risk Assessment, • Site Commissioning and Troubleshooting experience, • Experience as designated competent person under Electricity at Work Regulations. Experience in roles such as: Authorised Person, Senior Authorised Person, Control Engineer and Authorising Engineer, • Experience in managing ageing assets, • Experience in training and mentoring site electricians, • COMPEX Ex01 – 04, • COMPEX Design (Ex12), parts A & B

Process Engineer Location: Sedgefield A leading organisation at the forefront of microwave and millimetre wave technology is expanding its advanced packaging and assembly capability. With a strong focus on innovation, high performance manufacturing and next generation RF solutions, the business is growing its Process Engineering team to support the industrialisation of emerging technologies. This is an excellent opportunity for an experienced Process Engineer to join a high precision manufacturing environment and contribute to the successful transition of new semiconductor and RF module assembly technologies into stable, scalable and high yield production. Role Description The Process Engineer will evaluate, develop, optimise and control semiconductor and RF module assembly processes, with a particular focus on die attach technologies including silver epoxy, silver sinter and eutectic attach, along with gold wire and ribbon bonding. Working in close collaboration with RF Engineering, the role will support the identification, assessment and advancement of future manufacturing technologies. This ensures that emerging product designs remain manufacturable, reliable and aligned with long term technical objectives. The successful candidate will take responsibility for process robustness, manufacturability, yield improvement and cost efficiency while supporting all elements of new product introduction. Key Responsibilities Technology and Roadmap Support • Collaborate with RF Engineering to identify suitable materials, processes and assembly methods that align with future product requirements., • Evaluate emerging die attach and interconnect technologies that enable higher frequency operation, improved thermal performance and increased power density., • Provide early manufacturability guidance during technology planning., • Assess scalability, automation potential and cost implications., • Lead feasibility trials and proof of concept builds., • Support supplier capability reviews and make or buy considerations. Die Attach Process Development • Evaluate and optimise die attach processes, including silver epoxy, silver sinter and eutectic attach., • Define process windows for temperature, pressure, time and atmosphere., • Create qualification plans and validation methodologies., • Conduct thermal, mechanical and reliability assessments., • Characterise voiding, bond line thickness, shear strength and thermal resistance., • Support material selection and supplier evaluation. Wire Bonding Process Development and Optimisation • Develop and optimise gold ball and wedge bonding processes., • Establish bonding parameters for a range of metallisation and substrate types., • Conduct pull and shear testing with reliability validation., • Address challenges related to intermetallic formation, pad damage and bond integrity., • Support development towards fine pitch and high frequency capable bonding. Manufacturing Process Development • Define, document and control new and existing manufacturing processes., • Develop process flows, standard operating procedures and control plans., • Implement statistical process control and yield monitoring using Cp and Cpk analysis., • Lead root cause investigations using structured methodologies such as 8D, DMAIC and FMEA., • Deliver continuous improvement for yield, cycle time and cost efficiency. New Product Introduction • Lead design for manufacture and design for assembly reviews., • Support prototype and pilot builds with robust validation plans., • Work closely with RF, mechanical, quality and operations teams to ensure manufacturability., • Define tooling, fixturing and automation requirements. Essential Requirements • Degree in Engineering, Materials Science, Physics or a related field., • Experience within semiconductor or RF module assembly processes., • Practical experience with one or more of the following processes: silver epoxy die attach, silver sintering, eutectic die attach and gold wire bonding., • Understanding of materials behaviour, intermetallic formation and thermal management., • Experience with process validation and statistical analysis tools., • Strong problem solving capability within a manufacturing environment., • Methodical, analytical and confident working across both development engineering and production operations., • Proactive, hands on and effective within a fast paced and scaling organisation., • Strong mechanical reasoning and cross functional collaboration skills. Desirable Criteria • Experience in high precision automotive electronics or power electronics with a strong focus on automation, process stability and a zero defect culture., • Background in semiconductor, electronics or high technology manufacturing., • Experience with equipment specification, procurement and commissioning., • Knowledge of RF packaging requirements and JEDEC standards., • Experience with thermomechanical modelling and material reliability testing., • Previous experience within RF electronic production or contract electronics manufacturing., • Knowledge of IATF 16949 or ISO 9001, with training available as required.

We’re hiring an RF Engineer to work on cutting-edge RF and mmWave technologies within a highly capable engineering team. This is a hands-on role focused on design, testing, and problem-solving, contributing directly to the delivery of robust, real-world RF products. You’ll take ownership of RF design activities while working closely with a broad group of engineers to bring concepts through to production-ready solutions. Your day-to-day • Design and simulate RF and mmWave circuits, modules, and subsystems, • Analyse system-level performance, optimise designs, and troubleshoot complex RF issues, • Carry out RF measurements, characterisation, and validation on prototypes and production hardware, • Create and maintain clear technical documentation such as design notes, test plans, and reports, • Ensure solutions meet performance targets, compliance requirements, and customer needs, • Feed innovative ideas into future product and technology development, • Provide technical support during customer discussions, bids, and proposal activity when needed From concept to production • Deliver RF designs in line with project schedules, cost targets, and quality expectations, • Support design maturation from early prototypes into volume manufacture, • Work with manufacturing and process teams to ensure designs are buildable, repeatable, and high quality, • Identify technical risks early and help drive mitigation throughout the development lifecycle Working with others • Collaborate closely with electronics, mechanical, software, and systems engineers, • Act as a technical reference point for internal teams and external partners, • Share progress and technical outcomes through design reviews and project updates

Building a sustainable tomorrow We have an opportunity for a Quantity Surveyor/Senior Quantity Surveyor to work within Yorkshire on the Collaborative Delivery Framework for the Environment Agency. The Framework covers the delivery of ESE and Construction Contracts for maintaining and renewing flood defences and associated infrastructure. Qualifications, skills, and all relevant experience needed for this role can be found in the full description below. Your team • You will be based out of our site office in York, • Maintain high personal safety and environmental standards in accordance with Company policy, • Maintain effective communication with the team you are working with, • Manage, supervise and mentor your direct reports, • Provide commercial contact with supply chain partners through pre-contract meetings, contract vetting and input to subcontract documents, • Commercial management of subcontractors including processing payments, obtaining final account agreements, and resolving disputed issues by negotiation, if appropriate, • Ensure the timely production of reliable cost performance data, • Assist in the production of monthly / quarterly reports, • Be responsible for change management including ensuring adherence to Contractual timescales and Notices, • Ensure adherence to Risk and Opportunity management protocol and advise the Management Team accordingly, • Be responsible for the timely production of appropriate levels of applications for payments in accordance with the provisions of the conditions of contract, • Attend and provide input to all site commercial meetings. Providing commercial advice to the site team, • Successful experience at Quantity Surveyor/Senior Quantity Surveyor level demonstrating effective core commercial skills, • Ability to establish and maintain collaborative relationships with the project team including the Client, Project Managers and Designers, • Have the confidence and ability to work within a team environment, and to have a positive influence on outcomes, • Willing to help and assist those around you in their development, • Early Contractor Involvement experience, • Experience in NEC3 and NEC4 forms of contract, • Experience of target cost contracts, • Previous MEICA experience, • Working towards CICES membership or equivalentWhats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day We strive to create an environment where everybody feels welcome and valued. xrnqpay Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.

Senior Electrical Engineer Cardiff Ensure all your application information is up to date and in order before applying for this opportunity. Up to £52,000 + Bonus We are recruiting for an experienced Senior Electrical Engineer to join a heavy industrial site in Cardiff. This is a hands role focused on maximising plant reliability, minimising downtime, and driving continuous improvement. The Role • Plan and manage electrical maintenance activities (PPM, shutdowns, breakdowns), • Lead and develop a team of electrical engineers and technicians, • Deliver efficient, cost-effective maintenance and repair programmes, • Control maintenance budgets, estimates, and work progress, • Manage and audit contractors, ensuring compliance with PTW and site standards, • Support production by coordinating maintenance with operational teams, • Drive continuous improvement and implement engineering best practices, • HND/Degree in Electrical Engineering (or similar), • Strong PLC experience (Omron, ABB, Siemens S7), • Knowledge of SCADA/HMI systems, • Experience with AC/DC motors, drives, inverters, and converters, • Proven team leadership xrnqpay within a heavy industrial environment, • Strong understanding of Permit to Work and contractor control

Our client is one of the fastest growing providers of Cold Chain Logistics. They require a POD Engineer to join their busy team onsite team on a permanent basis. Offering a salary of £52,882 per annum the role is based 5 days out of 7, with a core pattern of Monday to Friday, 08:00am to 17:00pm - there is occasional weekend work. Key Responsibilities: Before applying for this role, please read the following information about this opportunity found below. We are seeking a proactive and technically capable POD Engineer to ensure the safe, reliable and efficient operation of the automated conveyor systems that interface with trailers, including powered chains, motors, air systems and associated control components. This role delivers planned preventative maintenance (PPM), reactive fault response and spare parts management for both fixed automation and trailer-mounted equipment. You will play a key part in maximising uptime, maintaining compliance with site and OEM standards, and supporting the smooth flow of goods through the automated loading process. Ideally based locally to your POD based in Scarborough Intermittent travel expected across all other client UK sites and customer locations, to support with maintenance and operational requirements. Depending on location, hotel accommodation will be arranged with your line manager, costs to be covered by the business and associated travel expenses. Key Duties: Automated Conveyor & Trailer Interface Systems Maintain and service automated conveyor systems feeding trailers. Work on motors, gearboxes, chains, rollers, sprockets, bearings and transfer units. Support automation interfaces between warehouse systems and trailers. Diagnose mechanical, electrical and pneumatic faults at conveyor-trailer handover points. Trailer Maintenance Deliver full PPM servicing of trailers, including powered floor systems, motors and pneumatic systems. Inspect air pressure lines, valves, hoses and connectors. Conduct condition checks during docked and undocked periods. Identify wear trends and recommend component replacements ahead of failure. Carry out cleaning of trailers as required. Planned Preventative Maintenance (PPM) Execute structured PPM schedules including daily/weekly inspections, monthly servicing, quarterly checks and annual overhauls. Record all PPM activity in the site CMMS or maintenance logs. Ensure compliance with site safety, food safety and cold-store standards. Reactive Maintenance & Fault Response Provide first-line reactive breakdown support for automation and trailer systems. Troubleshoot faults quickly to minimise downtime. Escalate complex issues to manufacturers or specialist support when required. Support recovery plans following major failures. Spare Parts & Inventory Management Manage on-site spare parts inventory for conveyors and trailer systems. Maintain accurate stock levels for motors, gearboxes, chains, sprockets, bearings, sensors, air fittings and trailer-specific components. Monitor usage trends and forecast future demand. Raise replenishment requests and support standardisation of parts to reduce SKU complexity and cost. Safety, Compliance & Continuous Improvement Work in line with LOTO and site safety procedures. Identify reliability risks and propose improvement actions. Support continuous improvement initiatives to reduce breakdown frequency. Provide technical feedback to operations and engineering management. Must be comfortable working in sub-zero freezer conditions of -19C and below. Requirements: NVQ Level 3 or equivalent in electrical or mechanical engineering. Experience working with pneumatics, electrical, and mechanical systems. Competence in PPMs and structured maintenance routines. Ability to work with OEM equipment and documentation. Experience with inventory tracking for engineering spare parts. Understanding of LOTO procedures. Please apply in writing with your CV in the first instance to Barker Ross Group values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. xrnqpay For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Multi-Skilled Maintenance Engineers (2 positions available) 2 shift pattern (6am-2.30pm & 1.30pm-10pm) no weekends! £45,000 plus 15% shift allowance, over time available Jackson Hogg are delighted to supporting our growing client with the appointment of 2 shift engineers to work on a permanent basis. We ae looking for someone comfortable being the sole engineer on a shift. You wil loversee all aspects of plant maintenance activities, ensuring maximum machine upstime, efficency and safety. This role is a mix of planed preventative maintenance & reactive. Job Description • Ensuring all machinery & equipment are capable of delivering the company production requirements in the most cost effective and efficient manner., • Carrying out breakdown maintenance in a timely manner., • Working closely with the production shift managers to improve machine reliability & process efficiency., • Co-ordinate with original equipment manufacturers and contractors for equipment maintenance, upgrades and installations., • Create monthly reports on machine reliability & downtime., • Be the main point of contact for all external maintenance contractors. Skills Required • Time served with previous experience as a Maintenance Engineer, • Be comfortable with lone working, • Strong understanding of CNC machines is essential, • Good communicator

Zenith are working with our client who are one of the worlds leading manufacturers and are looking to welcome a Multi Skilled Shift Engineer on a permanent basis. This is an exciting opportunity to join a dynamic team focused on delivering world class products. The Opportunity To ensure swift resolution of any Plant breakdowns on site. To assist the Engineering Manager in the completion of the Site PPM Schedule on a daily, weekly and annual basis. This permanent position will report to Engineering Manager. * Nothing is so important that it can’t be done safely; the welfare of your colleagues is paramount and you must promote and support a safe working environment and foster a culture of “safety first”. * Maintaining the integrity of our products and therefore the business itself is an absolute. * You must ensure this is always the case as we never knowingly compromise product safety. * Never knowingly compromise on quality; pursue Customer Fixation and show Passion by striving for the highest possible standards of quality in our products, people and plant. * You must Develop the Best in your people to ensure our success in achieving customer, business and individual targets, whilst building a Sense of Fun in to what we do. * Good quality communications at the right time will ensure the highest standards of Teamwork from all your colleagues within the business and make certain we are all pulling together in the right direction. * You must maintain a structured approach to the delivery of the production plan and the business targets as second chances to get it right are rare. * Achieving required output with minimum wasted effort, time and expense; meet standards consistently to achieve the cost base to continue our growth and drive world class Performance, whilst always striving to Find a Better Way. Qualification & Experience Requirements * Electrical and/or mechanical qualifications/time served apprenticeship. * 2 Years’ experience of working in an automated production environment. * A good standard of both written and oral English. * Basic Health & Safety * Data and analytical skills * Computer literate (word/excel/windows based packages) * Desirable skills: PLC’s, pneumatics, hydraulics, temperature control, instrumentation, welding. Whats On Offer The opportunity to develop your career on a global stage, continuous learning through an on-demand learning platform, and a competitive compensation package including staff discounts, generous family leave policy, health plan, pension. Shift * 4 on 4 off shift pattern

Trainee AI Engineer - No Experience Needed! Ready to launch a future-proof career in AI - even if you have zero experience? We’re looking for ambitious individuals ready to break into the world of artificial intelligence and data science. Our industry-leading AI Traineeship is designed to take you from complete beginner to a highly employable Junior AI Engineer, with full training provided and a guaranteed job offer (£25K-£45K starting salary) within 20 miles of your location. Whether you're working full-time, part-time, or currently unemployed, our flexible, self-paced program allows you to train around your lifestyle and be job-ready in as little as 6-12 months. How it works - your journey to AI success Step 1: Discover AI Start your journey with our beginner-friendly mini-course bundle. Explore the fundamentals of AI through interactive videos, presentations, and quizzes - all accessible anytime, anywhere, through our easy-to-use online platform. Step 2: Full-Stack AI Mastery Dive deeper with in-demand technical skills including Python programming, data handling, machine learning, and version control with Git and GitHub. You’ll work on hands-on mini projects that mirror real-world challenges, helping you build confidence and a strong portfolio as you learn. Step 3: Get Certified Prepare for and earn your Microsoft AI-900: Azure AI Fundamentals certification, an internationally recognised qualification that proves your knowledge and boosts your credibility with employers. Step 4: Real-World Projects Showcase your new skills with two industry-based, practical projects assigned by your personal tutor. These projects are designed to give you real, portfolio-worthy experience, making you stand out to employers from day one. Your guaranteed future After completing your training, you'll be placed in a Junior AI Engineer role with a guaranteed starting salary of £25K-£45K. We work with top employers across the UK to ensure you get matched with a role close to home. We guarantee a job offer upon completion or 100% of your course fees refunded. We’re proud to have helped over 1,000 people each year transform their careers. Explore our success stories on our website and see what your future could look like. At a one off cost of £990, or a deposit of £149 followed by 10 interest free monthly instalments of £124, this represents a great opportunity to start a rewarding career in Ai and have a real career ladder to start climbing. If you are not offered a role at the end of the training we will refund 100% of your course fees. Ready to future-proof your career? If you’re passionate about tech and ready to break into one of the fastest-growing industries in the world, apply now. One of our friendly advisors will be in touch to guide you through the next steps. ‘Please note that this is a training course and fees apply

About the Business A global engineering and technology organisation delivering complex, large-scale industrial projects across the metals sector. They design, build, and upgrade production facilities, combining mechanical, electrical, and process engineering expertise to deliver full turnkey solutions from concept through to commissioning. Fluids Engineer – Role Overview As a Fluids Engineer, you’ll play a key role within the engineering team, you will take ownership of a defined scope within a project, with responsibility for delivering high-quality technical output while ensuring productivity, progress, health & safety, and full compliance are maintained throughout. This is a hands-on, project-focused role where you’ll collaborate closely with multidisciplinary teams, suppliers, and clients to drive successful project delivery from design through to commissioning Key Responsibilities Contribute to the design and delivery of fluid systems across allocated project scopes Produce and review high-quality engineering documentation (P&IDs, schematics, calculations, BoMs, manuals) Act as the technical focal point for all fluid-related aspects within project teams Support project delivery by managing progress, technical output, and change control Ensure compliance with all relevant standards, regulations, and internal procedures Contribute to design reviews, safety assessments, and risk evaluations Provide hands-on technical support through manufacturing, testing, installation, and commissioning phases Work closely with procurement, suppliers, and subcontractors to ensure efficient delivery Support tendering and proposals by developing technical specifications and cost inputs Build and maintain strong relationships with internal teams, clients, and external partnersWhat We’re Looking For Solid experience in industrial fluid systems or hydraulics, ideally within heavy industry Strong design capability with a practical, hands-on engineering mindset Ability to deliver robust, manufacturable solutions suited to harsh operating environments Experience producing engineering calculations (Excel or similar) Good understanding of health & safety and regulatory requirements Confident working both independently and within multidisciplinary teamsDesirable Experience Background in fluids design engineering within heavy industry environments Experience across the full project lifecycle (design through to commissioning) Exposure to iron & steel or similar process industries 3D CAD experience (Autodesk Inventor, CADWorx, Siemens NX) Professional membership or working towards accreditation With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients

Network Engineer Placement Programme - No Experience Required Our training will help you kick-start a new career in Network Engineering We are recruiting for companies who are looking to employ our Network Engineer Traineeship graduates to keep up with their growth. The best part is you will not need any previous experience as full training will be provided. You will also have the reassurance of a job guarantee upon completion. Whether you are working full time, part time or unemployed, this package has the flexibility to be completed at a pace that suits you. The traineeship is completed in 4 easy steps, you can be placed into your first role in as little as 8-12 weeks: Step 1 - Online Training The first step is completing a selection of professional, accredited and industry recognised IT Support courses by CompTIA, Microsoft and Cisco. The training is delivered via multimedia rich video tutorials, presentations and quizzes through a portal that you study from home. You will also be assigned an expert tutor to help you throughout your training. Step 2 – Practical Training You will gain the practical experience by using our cutting edge Livelabs. Gaining hands-on experience is essential in today’s IT industry for both certifications and keeping up to date with new technologies. Theory is often not enough these days, companies require hands on practical experience to make sure you're job ready. Step 3 – Official exams You will then go on to sit the CompTIA A+ exams to give you the official certifications which will be recognised worldwide. The CompTIA A+ is the most commonly asked for certificate in entry level IT roles. Step 4 – IT Technician placement You will be placed into your first role as an IT Technician, with a great starting salary. You will need to gain two years experience in this role before you can progress into a Network Engineer role. While working as an IT Technician, we will release your second batch of training which is specifically designed to qualify you to move into the networking field. This will consist of online training, practical training and an official exam. Network Engineer Role Once you have completed all of the mandatory training in step four and have the required two years experience in the IT industry, you will be ready to move into your Network Engineer role. We have partnered with a number of large IT companies who have a massive shortage of qualified Network Engineers. At a one off cost of £990, or a deposit of £149 followed by 10 interest free monthly instalments of £104, this represents a great opportunity to start a rewarding career in IT and have a real career ladder to start climbing. If you are not offered a role at the end of the training we will refund 100% of your course fees. Read through the information? Passionate about starting a career in IT? Apply now and one of our friendly advisors will be in touch. ‘Please note that this is a training course and fees apply

Electrical Engineer Location:Stockton-On-Tees, but willing to travel on occasion. Salary: £80,000 per annum (negotiable depending on experience) Site based with occasional requirements around the UK to clients terminals. Permanent Start Date: ASAP Job Overview Technical Partners are looking for a knowledgeable and experienced Electrical Engineer to join our clients team as a Subject Matter Expert (SME) for electrical systems and equipment. In this role, you will ensure the safe and reliable operation of our clients electrical systems and assets, provide technical support, and lead various electrical projects, operations, and maintenance activities. What's in it for you? Salary up to £80,000 based on experience and/or chartership. 25 days holiday + bank holidays, rising to 30 days with service Employer contribution 9%, Employee contribution minimum of 5% Annual Performance Bonus Accommodation and company vehicle can be arranged and expenses covered BUPA Healthcare & Health Insurance Westfield Health Cashback Discount voucher scheme Life Assurance, 4 times basic salary Key Responsibilities Electrical Safety: Implement and maintain our clients Electrical Safety Rules, ensuring compliance with current legislation and best practices. Electrical Competency: Serve as the Designated Electrical Competent Person, overseeing competency assessments for site and contractor electricians. Maintenance & Reliability: Plan and manage electrical inspection and preventative maintenance for High Voltage (HV) and Low Voltage (LV) systems, as well as ATEX-certified equipment. Technical Expertise: Apply appropriate electrical engineering standards and codes while managing any deviations, ensuring the best practices are applied across projects. Project Involvement: Review designs, perform electrical calculations, prepare cost estimates, and develop business case proposals for new electrical systems and upgrades. Problem Solving: Provide technical support for troubleshooting, root cause failure analysis, and resolving issues related to electrical systems. Commissioning & Support: Assist with site commissioning of new equipment and systems, including quality assurance reviews and the preparation of commissioning procedures. Site Electrical Equipment: includes Power Transformers, HV/LV Switchgear Air, Vacuum and Oil, HV/LV distribution, ATEX and FLP Motors, Motor Starters, HV/LV VSD's, Soft Starts, UPSs, lighting, trace heating, hazardous area cabling/containment/junction Boxes and Earthing and Bonding systems. Day-to-Day Responsibilities Act as the lead Electrical SME, ensuring timely and high-quality responses to engineering queries from operations and maintenance. Ensure contractors comply with site safety rules and support emergency response teams as needed. Participate in hazard analysis studies (HAZOP) and contribute to safety audits and observation rounds. Develop and manage electrical works within CAPEX and OPEX budgets. Report monthly on key performance indicators (KPIs) related to electrical engineering and maintenance. What We're Looking For Degree in Electrical Engineering/Chartered Engineer status or ideally working towards Chartered Engineer status. Significant experience in designing, installing, and maintaining electrical systems, preferably in a COMAH site or the bulk liquid storage sector. Proficiency in electrical design, including load lists, single-line diagrams, cable sizing, fault level studies, protection grading studies, motor starting calculations and lighting protection calculations. Hands-on experience with site commissioning, troubleshooting, and risk assessment. Competency in managing aging electrical assets and working in hazardous areas. Experience as designated competent person of UK regulations, including Electricity at Work Regulations, DSEAR, PUWER, and COMAH. (SAP) CompEx Ex01-04, CompEx Design (Ex12) (desireable) familiarity with BS 7671 and BS EN 60079. Why Join Us? Our clients offer unique storage solutions for crude, petroleum, chemical, bitumen, liquefied gas and biofuel products. Their terminals are pipeline-connected to local chemical manufacturing facilities and gas processing plants and each facility is an Upper Tier COMAH Site. You'll have the opportunity to lead electrical projects in a dynamic and safety-focused environment. You'll work alongside a talented team while enhancing your expertise in electrical systems and contributing to the safe and efficient operation of our terminals. #jessicaeci

NRL are looking for a P6 Planning Engineer who is fully conversant with Primavera P6 to join our clients team based in the North East. This is an exciting opportunitiy to work on exciting projects, across varied industries. This role can be either a contract or permanent position and if contract happy to be paid outside IR35. Responsibilities Develop and maintain detailed project schedules using Primavera P6 Create and manage Work Breakdown Structures (WBS) and logic‑linked programmes. Identify and analyse the critical path, dependencies, and schedule float. Update progress, actuals, remaining durations, and forecasted completion dates. Produce regular progress reports, dashboards, and performance analysis. Conduct earned value analysis and monitor cost/time performance indicators. Collaborate with project managers, engineers, and stakeholders to gather data. Support change management, including assessing delays and preparing impact/delay analyses. Contribute to risk reviews, identifying schedule risks and mitigation strategies. Develop resource‑loaded schedules and analyse workforce requirements. Ensure scheduling processes align with contractual requirements and company standards. Maintain accurate baseline schedules, version control, and P6 systems/configurations. Requirements Proven experience as a Planning Engineer using Primavera P6. Strong understanding of project planning principles, critical path analysis, and WBS structuring. Experience in engineering, construction, infrastructure, or related project environments. Ability to interpret technical drawings, scope documents, and engineering data. Strong analytical and reporting skills, including proficiency with Excel/Power BI (desirable). Excellent communication skills and ability to work with cross‑functional teams. If this is of interest please contact Rochelle - (url removed) The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website