Electrical training jobs in Borehamwood - Page 2Crear alertas

Installation Engineer Location: London (UK travel required) | Salary: Competitive | Permanent | Full-time We are seeking an ambitious and personable Installation Engineer with a background in smoke ventilation systems. This is a fantastic opportunity for a qualified or partially qualified electrician to progress their skills in a professional, supportive, and fast-growing engineering environment. Role Overview As an Installation Engineer, you will: Install, maintain, and wire smoke ventilation systems from a variety of manufacturers. Work with lead engineers to ensure key project deadlines are met. Communicate effectively with clients and colleagues to maintain professional standards. Carry out planned preventive maintenance in line with contract scopes and manufacturer guidance. Use company software to raise quotes and record asset information, diagnostics, remedial actions, and supporting notes/photos. Travel all across the UK with occasional stopovers and overtime. Take personal responsibility for development, safety, and maintaining company vehicles/equipment. Exercise delegated authority to stop or refuse unsafe work, recording and escalating actions in line with procedures. Skills & Experience Full, clean driving licence required. Qualified or partially qualified electrician with smoke ventilation experience. NVQ Level 3 Electrical Installations (or equivalent) and JIB/ECS card holder. Rooftop Safety / Work Restraint training (e.g., SpanSet), PASMA, and IPAF certifications advantageous. Working knowledge of multiple smoke ventilation systems and standards, including Approved Document B, BS EN 12101, BS 9999, BS 9991, and BS 7346 pt8. Strong communication skills and a proactive, safety-conscious mindset. Why Apply Competitive salary with annual review and bonuses Company van and fuel card. Health benefit cash plan and Rewards Sick pay 22 days holiday plus bank holidays, increasing with service. Life Assurance Opportunity to develop your technical skills and progress your career within a supportive team.If you are a motivated engineer who takes pride in delivering safe, high-quality installations, apply today! INDCP

Vehicle Technician - Watford - Basic Salary - £33,000 - £35,000 OTE - £43,000 UNCAPPED - Great Benefits Package - Our client, a Busy Franchised Dealership in Watford have the requirement for experienced Vehicle Technician/Mechanic to join their established workshop team. Vehicle Technicians - Mechanics coming back to the motortrade are most welcome. Vehicle Technician Responsibilities As a Vehicle Technician, responsibilities will include: Ensure Servicing & Repairs are carried out to Manufacturer Standards Cambelt, Clutch, Gearbox & Engine Repairs/Replacements Electrical & Mechanical Diagnostics Mechanic Warranty Repairs Carry out MOT Tester to DVSA standards (If qualified) Experience, Skills & Qualifications Essential Requirements: Level 3 NVQ or equivalent in Light Vehicle Maintenance 2 years Post Apprenticeship Experience Full and clean UK Driving Licence Desirable Requirements: Class 4 MOT Licence Manufacturer Accreditations MOT Licence (Class 4 & 7) Remuneration & Benefits Basic Salary of up to £35,000 DOE + Overtime lots of it. On Target Earnings of £43,000 uncapped Manufacturer Training Programme EV/Hybrid Training Opportunity to qualify as an MOT Tester Great benefits package Staff Car Scheme

Lead Engineer Tottenham £37,000 - £43,000 Basic + Company Van+ Fuel Card + OEM Training + Flexibility + Monday - Friday role + Work-life balance + Local patch + Family-feel + Tight knit team + Job satisfaction + Package Join a company as a Lead Field Service Engineer where you'll be fully supported with on-the-job training and provided with all the tools needed to perform at your best. This is a varied, hands-on role with a hybrid split between field service and workshop work, working across a wide range of equipment while leading from the front and supporting junior engineers in high-end customer environments. The company designs, installs, and maintains commercial coffee machines across hospitality, retail, and corporate sites. As a Lead Field Service Engineer, you'll be trusted as the technical expert, remaining hands-on while benefiting from strong support from both engineering and management teams. Your Role as Lead Field Service Engineer Will Include: * Lead Engineer role with a split between hands on and field service in the Walthamstow area * Installation, servicing, fault-finding, refurbs and repair of commercial coffee machines * Acting as technical support and mentor to junior / trainee engineers * Hands-on electro-mechanical engineering with plumbing and electrical elements As a Lead Field Service Engineer You Will Need: * Strong electro-mechanical experience (coffee, vending, catering, white goods, or similar equipment) * Leadership mindset - happy to support, guide, and lead others * Full UK driving licence * Customer-focused attitude and pride in quality workmanship Please apply or contact Becka on 07458163046 for immediate consideration. Keywords: Lead Engineer, Lead Field Service Engineer, Coffee Engineer, Coffee Machine Engineer, Catering Engineer, Field Service Engineer, Electro-Mechanical Engineer, Service Engineer, Maintenance Engineer, Electrical Engineer, Mechanical Engineer, Commercial Coffee Engineer, Vending Engineer, White Goods Engineer, London, East London, North East London, Walthamstow, Leyton, Leytonstone, Chingford, Woodford, South Woodford, Wanstead, Stratford, Hackney, Tottenham, Enfield, Ilford, Barking, Dagenham, Romford, Bow, Bethnal Green This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. TPBN1_UKTJ

Service Engineer / Field Service Technician / Compressor Engineer required to join a leading Compressed Air Manufacturer The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide electrical and mechanical repair, service and maintenance on compressed air equipment at customer sites across North London and home counties., and the surrounding areas. Full product training provided. The Service Engineer / Field Service Technician / Compressor Engineer will ideally have a field Service background in electrical and/or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, pipework, vacuum pumps, vacuum systems, blowers, dryers, valves, rotating equipment or similar compressed air related equipment. Package £35,000-£40,000 (OTE £55K depending on experience) Company van 25 days holiday plus bank holidays Company pension Overtime Tablet, tools insurance Phone Additional benefits Service Engineer / Field Service Technician / Compressor Engineer Role To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air products. Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, Valves and other compressed air and pneumatic equipment across Nottingham and the surrounding Areas. Identifying and providing the customer with compressed air improvements, upgrades, or general aftercare of compressor products. Perform emergency breakdown fault finding and repairs on various compressed air equipment. Liaise with various engineering departments. Service Engineer / Field Service Technician / Compressor Engineer Requirements Proven diagnostic skills on complicated electrical/mechanical engineering systems. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Mechanical Engineer / M&E Engineer or similar. The ability to maintain good professional working relationships with existing and new customers. Good working knowledge of three-phase electrics and controls is advantageous. Field servicing background in compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, Blowers, Dryers, pumps, motors, rotating equipment or capital equipment is advantageous. Training provided. A technical engineering degree or apprentice trained would be advantageous. Homebased, willing to travel across North London and home counties. TPBN1_UKTJ

Compressed Air Service Engineer North London & Hertfordshire OR Essex & East London Full time, permanent Monday - Friday Salary: £35,000 – £45,000 (DOE) Our client is a well-established specialist provider of compressed air, vacuum and gas generation solutions. They support customers across a wide range of industries with system design, installation, servicing, breakdown support and energy-efficient compressed air solutions. With a strong reputation for technical expertise and customer service, they work closely with their clients to ensure reliable, efficient and compliant compressed air systems. The Role Our client is now looking to recruit an experienced Compressed Air Service Engineer to cover either: • North London & Hertfordshire, or, • Essex & East London You will be field-based, attending customer sites carrying out servicing, maintenance, breakdowns and installations of compressed air systems and associated equipment. You will work as part of a highly experienced engineering team, reporting into the Service Management team who will plan and allocate your daily workload. Key Responsibilities • Service, maintain, repair and install compressed air systems and ancillary equipment, • Diagnose mechanical and electrical faults on compressors and air treatment equipment, • Carry out planned preventative maintenance (PPM), • Attend breakdowns and carry out effective fault finding and repair, • Complete accurate service reports and documentation, • Build strong working relationships with customers, • Represent the business professionally on customer sites Requirements • Proven experience working as a Compressed Air / Service Engineer, • Strong mechanical and electrical fault-finding ability, • Experience maintaining and repairing compressed air systems, • Ability to work independently on customer sites, • Full UK driving licence, • Strong communication and customer service skills, • Organised and reliable with good time management Desirable • Experience working across a variety of industrial and commercial environments, • Relevant engineering qualification (mechanical or electrical), • Experience with dryers, receivers, pipework and air treatment systems, • Basic IT skills for job reporting What’s On Offer • Salary between £30,000 – £45,000 depending on experience and training, • Company vehicle and specialist tools, • Ongoing training and development, • Long-term career progression with a growing specialist business, • Supportive and experienced engineering team, • Stable, long-term employment with a respected business

Field Service Engineer - White Goods, Laundry North London / Hertfordshire £36,000-£41,000+ Bonuses, Regular Overtime (£45-£50k+ OTE) + Full Training + Van + Door to Door + 36 days holiday + Medical Are you a service engineer from a white goods, catering or similar electromechanical background looking to join an international OEM offering specialist training and regular overtime at x1.5 and x2? This is an outstanding opportunity to join a highly respected, international manufacturer of commercial laundry equipment that will fully train you on high quality technical equipment. The excellent package including bonuses, 28 days holiday + bank holidays, medical cover, regular enhanced overtime and more. The company are a global organisation with an excellent reputation and a successful track record of training and progressing their employees. This is a regional role, paid door to door, servicing, repairing and maintaining commercial laundry equipment, there is a weekend call out rota 1 in 4 weekends with additional payments and overtime rates applied. This is a great chance for a service engineer to join a rapidly expanding OEM offering excellent training, interesting and varied work in a regional service engineer position with regular overtime. George Mallett - 4738 - (url removed) The Role: *Field Service Engineer - Commercial Laundry *Servicing and repairing equipment *Regional role *Regular overtime, bonuses, door to door travel and training The Candidate: *Experience within white goods, laundry, catering or similar *Electrical experience *Full Driving License Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Service Engineer, Mobile Engineer, Field Service, Technician, White Goods, Catering, Coffee, Dishwasher, Domestic Appliances, Glasswasher, Comcat, Commercial, Refrigeration, Electrical, 18th, Watford, London, Wembley, Stevenage, Luton, Harrow, Hertford, Hertfordshire

Field Service Engineer, Imaging Systems *Excellent opportunities for experienced Service Engineers from a range of electronics or electro-mechanical system backgrounds to join a market leading manufacturer of imaging systems * Basic Salary £45,000 to £50,000 Company Car On Call Allowance Circa £3,000 Overtime £5,000 to £15,000 Full Product Training Pension Healthcare Phone, Laptop Holidays The Role – Field Service Engineer, Imaging Systems This market leader seeks to recruit a technically motivated and customer focused Field Service Engineer, responsible for the service, installation and breakdown repair of a wide range of sophisticated imaging systems. Your Background – Field Service Engineer, Imaging Systems To succeed in this exciting role you will have the following skills or epxerience: A competent background in a service or maintenance engineering capacity gained within any high value capital equipment environment Applications are encouraged from engineers with a broad range of backgrounds, including: - imaging / printing / pre-press - semi-conductor - manufacturing - maintenance / PLC - electronics / electro-mechanical - laboratory, medical, pharmaceutical, - ex forces engineers (medical and dental, weapons systems, radar, REME electronics) A qualification in engineering, electrical or electronics is essential Applicants are welcome from engineers from a broad base of sectors, as full and comprehensive product training will be provided The Company - Field Service Engineer, Imaging Systems Well respected supplier of sophisticated imaging systems Their commitment to investment in research and development is second to none in their industry, ensuring that they remain a market leader At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or an employment business

An excellent opportunity for an experienced Field Service Engineer to join a well-established company! Job Title: Field Service Engineer - Cleaning Equipment Specialist. Job Type: Full-Time, Permanent. Salary: £40,000 Per Annum. Location: Watford WD24 (Field Based). About The Company: They are a leading provider of high-quality, innovative cleaning machines and equipment for commercial and industrial applications. They pride themselves on their commitment to excellent customer service and their ability to deliver reliable and effective cleaning solutions to their clients. About The Role: As a Field Service Engineer with the company, you will be responsible for the maintenance, troubleshooting, and repair of their advanced cleaning machines at customer sites. This role requires a strong technical background, excellent problem-solving skills, and a customer-focused attitude to ensure clients receive exceptional service and support. Duties & Responsibilities: • Maintenance & Repair: Maintain, troubleshoot, and repair cleaning machines and equipment at customer sites to ensure optimal performance and customer satisfaction, • Preventive Maintenance: Perform preventive maintenance checks and services to minimize downtime and prolong equipment lifespan, • Technical Support: Provide remote and on-site technical support to customers, addressing inquiries and resolving issues promptly and professionally, • Customer Training: Train customers on the proper usage and maintenance procedures for our cleaning machines, empowering them to maximize the value of their investment, • Collaboration: Collaborate with the Sales and Engineering teams to identify potential improvements in product range and serviceability, • Industry Knowledge: Stay current with industry trends, product updates, and emerging technologies to maintain a high level of technical expertise, • Safety Compliance: Adhere to all company policies and safety guidelines, promoting a safe and professional work environment Candidate Requirements: • Experience: 3+ years of experience in field service engineering, preferably in the cleaning equipment industry but not essential, • Technical Skills: Strong mechanical, electrical, and troubleshooting skills, with the ability to diagnose and repair equipment, • Communication: Excellent interpersonal and communication skills, with a customer-focused attitude and the ability to establish and maintain strong relationships, • Travel: Valid driver's license with the willingness to travel to customer sites as needed, • Teamwork: Ability to work independently and as part of a team, managing multiple tasks and priorities effectively, • Full UK Driving Licence Company Benefits: • Competitive Salary: They offer a competitive salary to attract top talent, • Training & Development: Ongoing training and development opportunities, including access to industry certifications and seminars, • Supportive Environment: A supportive and collaborative work environment, with opportunities for growth and advancement, • Innovative Technology: The chance to work with cutting-edge cleaning technology and contribute to the success of a growing company, • Company pension, • Free parking, • Health & wellbeing programme, • Paid volunteer time, • Referral programme If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need

Job Description Were looking for an experienced Mechanical Pump Engineer (Field Based) to join our esteemed, market leading client, specialising in pumping equipment solutions, boasting over sixty years of industry expertise around the Tottenham area! You'll work closely alongside a skilled Electrical Engineer to respond to breakdowns, perform servicing, and handle installation and commissioning of a wide range of pumping systems. This role is ideal for someone mechanically biased with hands-on experience in pumps, valves, pipework, water treatment, drainage, or utilities. This is a Full-Time, Permanent position! What youll be doing Mechanical servicing, installations, and commissioning on a variety of pumping equipment including Pumps, Valves, Pipework, Pumping Stations, Pump Kiosks etc Maintenance and monitoring of equipment Optimise equipment through troubleshooting and repairs Respond to service requests and breakdowns Log work progress in detailed site reports Adhere to health and safety regulations Provide excellent customer service and act as a positive company representative Drive the company van and maintain with necessary tools and supplies needed Hours Monday-Friday, Day Shifts, 40 hours per week (flexibility required) Pay £35,000 - £45,000 per annum (depending on experience) Overtime paid at time 1/3 & time 1/2 Skills/Experience Required Essential Hands-on experience with Pumps, Valves, Pipework or similar A valid UK driving licence Preferred Mechanical engineering qualifications A background in Utility Maintenance, Water Treatment, Drainage etc CSCS, First Aid or Confined space training Benefits Company pension (after 3 years company fund employee contribution) Private healthcare Critical illness cover Death in wish service Overtime available Training provided Growing business with opportunities for progression All expenses covered Tools provided Free on-site parking Day shifts No weekends Flexible working Essential All applicants must have the legal right to work in the UK (sponsorship not provided). All applicants must be commutable to the Tottenham area. What to do next If youre interested in this role, please apply and we will be in touch! Modus Personnel are acting as an employment agency on behalf of our client. TPBN1_UKTJ

Electrical Engineer Watford, Hertfordshire £45,000 - £50,000 Great role for an Electrical Engineer to join our client's maintenance team on a prestigious, commercial site in Watford! This is a great role if you're looking to improve your technical skills, client facing skills and to be part of an excellent maintenance team. This is a static position, following a Monday - Friday, 8am - 5pm pattern. As an Electrical Engineer, you will carry out PPM and reactive maintenance on electrical systems, work on mechanical systems, general building services, update site logbooks, work within communal, tenant and landlord areas. Electrical Engineer Duties: Carrying out planned and reactive electrical maintenance in commercial properties Diagnosing and resolving electrical faults quickly and effectively Conducting inspections, testing, and compliance checks Emergency lighting testing and remedial Working on motors, pumps, AHUs, FCUs, and three-phase power systems Maintaining accurate records and documentation Delivering a high standard of customer service on-site Collaborating with clients and colleagues to ensure excellent service delivery Electrical Engineer Requirements: Fully qualified in either Electrical installations or engineering (City and Guilds / EAL / NVQ or equivalent) At least 3 years experience as an Electrical Engineer within a commercial environment Good knowledge of commercial M&E systems Client facing attitude Salary and Package: Up to £50,000 per annum Monday - Friday, 8am - 5pm Company pension scheme 25 days annual leave + Bank holidays Overtime available Internal progression Additional training Join a market leading company If you're looking for an excellent Electrical Engineer role, then apply today

Electrical Engineer Watford, Hertfordshire £45,000 - £50,000 Great role for an Electrical Engineer to join our client's maintenance team on a prestigious, commercial site in Watford! This is a great role if you're looking to improve your technical skills, client facing skills and to be part of an excellent maintenance team. This is a static position, following a Monday - Friday, 8am - 5pm pattern. As an Electrical Engineer, you will carry out PPM and reactive maintenance on electrical systems, work on mechanical systems, general building services, update site logbooks, work within communal, tenant and landlord areas. Electrical Engineer Duties: Carrying out planned and reactive electrical maintenance in commercial properties Diagnosing and resolving electrical faults quickly and effectively Conducting inspections, testing, and compliance checks Emergency lighting testing and remedial Working on motors, pumps, AHUs, FCUs, and three-phase power systems Maintaining accurate records and documentation Delivering a high standard of customer service on-site Collaborating with clients and colleagues to ensure excellent service delivery Electrical Engineer Requirements: Fully qualified in either Electrical installations or engineering (City and Guilds / EAL / NVQ or equivalent) At least 3 years experience as an Electrical Engineer within a commercial environment Good knowledge of commercial M&E systems Client facing attitude Salary and Package: Up to £50,000 per annum Monday - Friday, 8am - 5pm Company pension scheme 25 days annual leave + Bank holidays Overtime available Internal progression Additional training Join a market leading company If you're looking for an excellent Electrical Engineer role, then apply today! TPBN1_UKTJ

Sales Manager - Electrical Products (M&E Contractors & Consultants) Location: South of England / M25 Corridor (Home-Based) Salary: £80,000 basic + 25% bonus Benefits: Company car (choice) or car allowance, 25 days' holiday + bank holidays, pension About the Role We are a leading electrical distributor seeking an experienced and driven Sales Manager to grow sales across the South of the UK, with a strong focus on the M25 corridor. You'll be responsible for building strong relationships with M&E contractors, consultants, and key end users, while identifying and securing new project opportunities across industrial, nuclear, datacentre, and construction sectors. This is a home-based role with autonomy, excellent earning potential, and the opportunity to represent a respected name in the electrical supply industry. Key Responsibilities 50/50 split between account management and new business development. Manage and grow an existing portfolio of M&E contractor and consultant accounts. Identify and win new business opportunities, particularly on major projects. Promote a broad range of electrical products and solutions to key decision-makers. Deliver sales presentations, site visits, and project support. Collaborate with internal teams to ensure exceptional customer service and technical support. Meet and exceed agreed sales targets. About You We're looking for someone who brings industry experience and strong market knowledge. You must have: Experience working for an electrical distributor or electrical manufacturer. Established relationships with M&E contractors and consultants in the South / M25 region. A successful track record in both account management and new business development. Experience selling into industrial, nuclear, datacentre, or construction environments. Excellent communication, relationship-building, and project follow-up skills. Self-motivation and the ability to work effectively from home. What's on Offer £70,000 basic salary 25% annual bonus Company car of your choice or car allowance 25 days' holiday + bank holidays Pension scheme Home-based flexibility with genuine territory ownership If you're an ambitious sales professional with the right electrical industry background, we'd love to hear from you. Apply now to join a growing business and contribute to major UK projects. At Morgan Ryder we can provide you with a full range of employment opportunities from short term and fixed term temporary vacancies to permanent positions. We recruit for companies that operate in the following industries: Defence Equipment, Food and Drink Manufacturers, FMCG, Packaging, Engineering, Automotive, Aerospace, Warehousing, Logistics, Waste Management, Petro Chemical, Pharmaceutical, Power & Renewable Energy. Our commitment: Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. Please note that calls to and from the offices of Morgan Ryder Associates Ltd. may be monitored or recorded. This is to ensure compliance with regulatory procedures, record business transactions and for training purposes

AIT Electrical Ground Support Equipment (EGSE) Engineer Certain Advantage is hiring for an AIT Electrical Ground Support Equipment (EGSE) Engineer based in the Stevenage area. This role is on a contract basis and is site-based. The Company We’re working with a Manufacturing business that operates in the Aerospace sector. They design, manufacture and deliver industry-leading commercial aircraft, and separate Space and Defence division. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for an AIT Electrical Ground Support Equipment (EGSE) Engineer —someone ambitious and ready to make an impact. You’ll be results-orientated and driven to succeed. You’ll be working in a small, experienced, and collaborative team, and be responsible for: Maintenance and fault finding of electronic/RF test racks. Computer systems and networks administration. Programming and scripting languages. Environmental and launch test campaign. Preparing test specifications for test racks, reviewing data packs from suppliers, and supporting reviews of test equipment design and non-conformances.The Individual We’re looking for people who can show: A degree in an Electrical Engineering related discipline or relevant experience in a similar role Knowledge of electronic and RF test racks Fault-finding skills down to board and component level. Network and computer administration in Windows and Linux environments Knowledge of interfaces such as Mil-1553, SpaceWire, CAN bus, RS232/422, etc. ATE environments such as PCI, VXI, PXI, etc. Use of a variety of general-purpose lab test equipment Knowledge, design, manufacture, and commissioning of test systems.The Benefits: Hourly rate of £45ph Training and DevelopmentDoes this sound like your next career move? Apply today. Working with Certain Advantage We go the extra mile to find the best people for the job. If you’re hunting for a role where you can make an impact and grow your career, we’ll work with you to find it. We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn’t for you, head to (url removed) and register for job alerts and career guidance tips

Assistant Maintenance Manager About the Role We are working with a prestigious client in the luxury hospitality sector who is seeking a proactive and experienced Assistant Maintenance Manager to join their Facilities team at a leading property in Watford. This is a fantastic opportunity to step into a leadership role within a dynamic and fast-paced environment, ensuring the smooth running of day-to-day maintenance operations across a large, high-end site. Key Responsibilities Supervise and support a team of engineers in the delivery of both planned preventative maintenance (PPM) and reactive repairs, ensuring all tasks are completed to a high standard and within appropriate timeframes. Coordinate with external contractors for specialist servicing, repairs, and inspections, ensuring compliance with safety standards and operational needs. Oversee the resolution and scheduling of maintenance requests submitted via internal systems (e.g. Hotelkit), ensuring effective prioritisation and follow-up. Take an active leadership role in team briefings and departmental meetings, stepping in to represent the Maintenance Manager when required. Ensure tools, materials, equipment, and chemicals are safely stored, well-maintained, and stock-controlled in line with health & safety policies and company procedures. Assist with recruitment, training, and performance development of team members, helping to foster a skilled, motivated, and safety-conscious maintenance team. Monitor departmental spending and support the Property Manager in maintaining cost control and adherence to budget targets. Organise maintenance shift patterns, ensuring adequate coverage and clear communication with both your team and other departments. Champion a safe, productive working environment and uphold compliance with all H&S regulations. Respond to guest requests with professionalism and escalate any complex or unresolved issues appropriately. About You To succeed in this role, youll need: Proven experience in a maintenance or facilities leadership roleideally within a hotel, resort, or similar multi-functional property. Strong knowledge of general maintenance disciplines, including mechanical, electrical, plumbing, and H&S compliance. Confidence supervising both people and tasks, with a calm, solutions-focused approach. Excellent communication and organisational skills, with the ability to manage multiple priorities under pressure. A collaborative and hands-on attitude, always striving to support your team and improve service delivery. Whats in it for You? Competitive salary + benefits package The opportunity to work in a high-profile, luxury hospitality environment Supportive leadership and development opportunities Meals on duty and access to staff facilities Free parking and additional perks (details available upon request) Interested? If you're a reliable, resourceful leader with a strong background in facilities or hotel maintenance, wed love to hear from you. Apply today to explore this exciting opportunity with our client. TPBN1_UKTJ

Senior Service & Maintenance Engineer CCTV & Access Control Focus £46,000 £50,000 basic DOE London Site Based Permanent, Full-Time Im recruiting for a Senior Service & Maintenance Engineer to support a well-established, high-quality electronic security integrator operating across commercial and construction environments in London. This role is ideal for an experienced engineer who enjoys complex fault finding, taking ownership of live systems, and being trusted as the senior technical point on site. Youll be responsible for keeping critical fire and security systems operational, compliant and reliable, while acting as a calm, professional presence with clients. This is a hands-on senior role with no people management focused on technical excellence, autonomy and long-term system performance. The Role As a Senior Service & Maintenance Engineer, youll take ownership of both planned preventative maintenance and complex reactive faults across a varied client portfolio. Youll be trusted to investigate issues thoroughly, identify root causes, carry out effective repairs and recommend sensible remedial or upgrade solutions where required. Your day-to-day will include: Planned preventative maintenance across fire & security systems Diagnosing and resolving complex or recurring faults Servicing live systems including CCTV, Access Control, Intruder and Fire Alarms Root-cause analysis to reduce repeat call-outs and downtime Repair, replacement and recommissioning of equipment Producing accurate, audit-ready service documentation Acting as a senior, client-facing technical representative Advising clients on system condition, risks and next steps Supporting installation and commissioning teams where servicing expertise is required Participating in an on-call rota as an escalation-level engineer This role plays a key part in maintaining system integrity, client confidence and long-term service relationships. Technical Scope CCTV, Access Control, Intruder and Fire Detection systems Preventative maintenance, diagnostics, repair and recommissioning Legacy and modern platforms IP-based environments including networking fundamentals Live, operational sites where accuracy and reliability are critical Location & Travel London-based client sites Role designed around public transport travel Monthly travel costs covered (Zones 12) No company vehicle required What Theyre Looking For Minimum 5 years experience servicing electronic security systems Strong fault-finding and diagnostic capability Solid knowledge of CCTV, Access Control, Intruder and Fire systems Familiarity with BS5839, BS7671 and industry codes of practice Confident, professional client-facing communication Ability to manage workload and priorities independently Strong commitment to health & safety Ability to pass background vetting / BPSS or SC clearance Desirable but not essential: IP networking knowledge Level 3 (or higher) electrical/electronic qualification ECS / CSCS card FIA modules or fire systems training Manufacturer training (e.g. Paxton, Avigilon, Gallagher, Salto, Texecom, Hikvision) Salary & Package £46,000 £50,000 basic salary Paid on-call rota Monthly travel costs covered Company phone, tools, uniform and PPE Fully funded, role-relevant training and certifications Employee ownership scheme (after qualifying period) 20 days holiday plus bank holidays Why This Role? Senior, respected servicing position Complex, technically interesting systems Autonomy and trust on site Strong training and standards Long-term stability within a quality-driven environment If youre a Senior Service / Maintenance Engineer who enjoys solving problems properly and being relied on for your technical judgement, Id be happy to talk through the role in confidence. TPBN1_UKTJ

Fuel your future with AO- earn up to £2,000 in performance bonuses, plus receive a £2,000 welcome bonus! Imagine achieving the perfect balance between work and life with a shift pattern that works for you. Join our team as a Gas Engineer and enjoy the freedom of maintaining your own Gas Safe card while earning a dependable income you can count on. We set you up for success with a fully loaded toolkit worth up to £3,000 — giving you everything you need to tackle any task with total confidence. No need to stress about buying expensive gear — we’ve got you covered! Salary: £38,767.75- £40,767.75 per annum Hours: 40 hours per week Shift Pattern: 4 on 4 off shift pattern Start/Finish time: 6:00am – 6:00pm Our main shift is 4 on, 4 off- but we're flexible. Looking for something different? Let's chat and see what works for you. Here’s what you can expect to be doing: As a Gas Engineer at AO, you’ll work alongside one of our drivers, visiting customers’ homes to install gas appliances and electrical products. Our mission is simple: to make our customers’ lives easier. That’s why you’ll play a key role in ensuring everything is set up safely and efficiently. Your focus will be on providing outstanding customer service—no need to worry about repairs. You’ll install the products with care and show customers how to get the most out of their new appliances. At AO, you’ll have the opportunity to positively impact lives while being part of a friendly, collaborative team that’s always ready to support each other. A few things about you: Essential Full UK/EU driving licence with no more than 6 points. CCN1 & CKR1 To be over the age of 21 for insurance purposes At least 1 year of experience within gas installations Desirable Some experience in electrical appliance installation is ideal, but we'll provide training to make you electrically competent. Our Benefits: As a Gas engineer, you will gain: A 4 on 4 off shift pattern and 24 days holiday, you will work less than half a year. On-call support from our technical team and Installation Managers Fantastic training facilities with ongoing learning opportunities Healthcare Cashback Scheme Competitive pension scheme Gain exclusive ticket access to AO Arena, Sales Sharks, and Manchester Thunder. To see all our benefits and perks, visit our AO Benefits page

Compressed Air Service Engineer North London & Hertfordshire OR Essex & East London Full time, permanent Monday - Friday Salary: £35,000 £45,000 (DOE) Our client is a well-established specialist provider of compressed air, vacuum and gas generation solutions. They support customers across a wide range of industries with system design, installation, servicing, breakdown support and energy-efficient compressed air solutions. With a strong reputation for technical expertise and customer service, they work closely with their clients to ensure reliable, efficient and compliant compressed air systems. The Role Our client is now looking to recruit an experienced Compressed Air Service Engineer to cover either: North London & Hertfordshire , or Essex & East London You will be field-based, attending customer sites carrying out servicing, maintenance, breakdowns and installations of compressed air systems and associated equipment. You will work as part of a highly experienced engineering team, reporting into the Service Management team who will plan and allocate your daily workload. Key Responsibilities Service, maintain, repair and install compressed air systems and ancillary equipment Diagnose mechanical and electrical faults on compressors and air treatment equipment Carry out planned preventative maintenance (PPM) Attend breakdowns and carry out effective fault finding and repair Complete accurate service reports and documentation Build strong working relationships with customers Represent the business professionally on customer sites Requirements Proven experience working as a Compressed Air / Service Engineer Strong mechanical and electrical fault-finding ability Experience maintaining and repairing compressed air systems Ability to work independently on customer sites Full UK driving licence Strong communication and customer service skills Organised and reliable with good time management Desirable Experience working across a variety of industrial and commercial environments Relevant engineering qualification (mechanical or electrical) Experience with dryers, receivers, pipework and air treatment systems Basic IT skills for job reporting Whats On Offer Salary between £30,000 £45,000 depending on experience and training Company vehicle and specialist tools Ongoing training and development Long-term career progression with a growing specialist business Supportive and experienced engineering team Stable, long-term employment with a respected business TPBN1_UKTJ

Air Source Heat Pump Engineer / Gas Engineer (ASHP) Location: Essex/Herts - (SG/CM/EN/AL) Job Type: Full-time, Permanent Sector: Renewable Energy / Domestic Heating / Gas & Heat Pumps Job Description We are currently recruiting an experienced Air Source Heat Pump Engineer (ASHP Engineer) with domestic gas qualifications to join our established heating and renewables team. This role is primarily focused on air source heat pump servicing, fault finding, maintenance, and repair, with additional responsibility for domestic gas boiler servicing and breakdowns across private residential properties in the Essex/Herts area (SG/CM/EN/AL) This position suits a skilled ASHP / Gas Engineer with strong diagnostic ability, electrical fault-finding experience, and a solid background in domestic heating systems. Key Responsibilities Service, maintain, and repair air source heat pump systems (ASHP) Fault finding and diagnostics on heat pump systems Domestic gas boiler servicing, safety checks, and minor repairs Breakdown response across ASHP and gas heating systems Electrical fault finding on heating and heat pump systems System upgrades, component replacement, and remedial works Planned preventative maintenance (PPM) Warranty and insurance repair work General plumbing work related to domestic heating systems Provide clear technical explanations and customer support Essential Skills & Qualifications Domestic gas qualifications: CCN1, CENWAT, CKR1, HTR1 Proven experience as a Domestic Gas Engineer Hands-on experience with air source heat pump servicing, fault finding, or repairs Formal ASHP qualification (Level 3 Heat Pump / manufacturer training) Electrical fault-finding experience Strong plumbing and domestic heating knowledge Full UK driving licence Good customer-facing and communication skills Desirable (Not Essential) Commercial gas qualifications or experience Boiler installation experience LPG qualifications Renewable energy background beyond ASHP Salary & Benefits Company van and fuel card Company tablet and mobile phone Uniform, tools, and FGA provided 29 days annual leave, increasing with length of service Pension scheme Overtime available Ongoing renewables and heat pump training Long-term career progression within the renewable sector

An excellent opportunity for an experienced Field Service Engineer to join a well-established company! Job Title: Field Service Engineer - Cleaning Equipment Specialist. Job Type: Full-Time, Permanent. Salary: £40,000 Per Annum. Location: Watford WD24 (Field Based). About The Company: They are a leading provider of high-quality, innovative cleaning machines and equipment for commercial and industrial applications. They pride themselves on their commitment to excellent customer service and their ability to deliver reliable and effective cleaning solutions to their clients. About The Role: As a Field Service Engineer with the company, you will be responsible for the maintenance, troubleshooting, and repair of their advanced cleaning machines at customer sites. This role requires a strong technical background, excellent problem-solving skills, and a customer-focused attitude to ensure clients receive exceptional service and support. Duties & Responsibilities: Maintenance & Repair: Maintain, troubleshoot, and repair cleaning machines and equipment at customer sites to ensure optimal performance and customer satisfaction Preventive Maintenance: Perform preventive maintenance checks and services to minimize downtime and prolong equipment lifespan Technical Support: Provide remote and on-site technical support to customers, addressing inquiries and resolving issues promptly and professionally Customer Training: Train customers on the proper usage and maintenance procedures for our cleaning machines, empowering them to maximize the value of their investment Collaboration: Collaborate with the Sales and Engineering teams to identify potential improvements in product range and serviceability Industry Knowledge: Stay current with industry trends, product updates, and emerging technologies to maintain a high level of technical expertise Safety Compliance: Adhere to all company policies and safety guidelines, promoting a safe and professional work environment Candidate Requirements: Experience: 3+ years of experience in field service engineering, preferably in the cleaning equipment industry but not essential Technical Skills: Strong mechanical, electrical, and troubleshooting skills, with the ability to diagnose and repair equipment Communication: Excellent interpersonal and communication skills, with a customer-focused attitude and the ability to establish and maintain strong relationships Travel: Valid driver's license with the willingness to travel to customer sites as needed Teamwork: Ability to work independently and as part of a team, managing multiple tasks and priorities effectively Full UK Driving Licence Company Benefits: Competitive Salary: They offer a competitive salary to attract top talent Training & Development: Ongoing training and development opportunities, including access to industry certifications and seminars Supportive Environment: A supportive and collaborative work environment, with opportunities for growth and advancement Innovative Technology: The chance to work with cutting-edge cleaning technology and contribute to the success of a growing company Company pension Free parking Health & wellbeing programme Paid volunteer time Referral programme If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need. TPBN1_UKTJ

Starting at £45,000 basic per annum, + total earnings potential of up to £55,000 - £60,000 inclusive of overtime • Company Vehicle + Fuel Card + Door-to-Door Travel Pay + Tools + Equipment + Attractive Holiday Entitlement + Pension Contribution + Comprehensive Training + Summer BBQ's & Team Events ----------------------------------North London and surrounding areas---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------- PLEASE NOTE, THIS POSITION IS DIRECT FROM THE EMPLOYER, WE ARE NOT AN AGENCY. WE ARE RECRUITING FOR MULTIPLE CANDIDATES NATIONWIDE IN PROXIMITY TO THE ADVERTISED LOCATIONS; Tired of the Same Old Testing Routine? At Test Inc. , we do things differently. We've reimagined the way electrical inspection and testing are carried out removing the tedious, manual-heavy processes and replacing them with cutting-edge technology, streamlined systems, and smarter workflows. If youve ever felt bogged down by paperwork or repetitive tasks in traditional testing roles, this is your chance to rediscover what you love about being an electrician. Benefits: Intensive Skill Enhancement: Dive into a world of comprehensive training and cultivate your electrical prowess in our cutting-edge, in-house development facility. Cruising in Style: Take the wheel of a company vehicle, complete with a fuel card, ensuring you're always on the move in comfort and convenience. Tech Savvy Essentials: Equip yourself with a sleek laptop and a mobile phone tailored to your job responsibilities and location, setting you up for success in the digital era. Ready for Action: We've got you covered with top-notch equipment, state-of-the-art instrumentation, tools, and a stylish uniform that screams professionalism. Holistic Well-being: Take advantage of our Employee Assistance Programme, ensuring your mental well-being is in good hands. Hassle-Free Parking: Say goodbye to parking headaches with our dedicated on-site parking, making your daily commute a breeze. Work, Play, Repeat: Join in on the fun with our summer BBQs and Team Building events, fostering a vibrant and collaborative work culture. Fuel for Success: Stay refreshed with free fruit, tea, coffee, and summer treats like ice lollies, because we believe in keeping you energized and motivated. Time to Unwind: Enjoy generous annual leave of 23 days plus 8 bank holidays, with an extra day for the first 2 years of service, allowing you to recharge and explore life beyond work. Test Inc. are the UK's leading provider of electrical compliance and maintenance services, specialising in complex and critical environments. We offer a full suite of services across the High Voltage and Low Voltage networks, providing your Single Partner Solution, from Power Station to Plug Top. Job Brief: Exciting opportunity to join a dynamic and progressive company in search of an ambitious EICR Electrician in a time of accelerated and sustained growth, both nationally and internationally. As a pivotal team member, you will engage in all facets of technical operations, playing a vital role in ensuring the seamless delivery of our services. As a technology-based business, everything we do is heavily reliant on technology to optimise business processes, pipeline, and operations. Additionally, we work closely with the academic leaders in the technology realm to support R&D projects for successful delivery of business objectives. The ideal candidate must have prior experience as an electrician within the electrical contracting/services, building services, or facilities/maintenance field. You will be joining a team of dedicated professionals, you should embody our values of optimal performance, integrity, teamwork, and commitment to excellence. This role demands an individual capable of working independently in a fast-paced environment, demonstrating initiative and agility to handle multiple tasks and projects simultaneously. As the business grows, the role will evolve, requiring a commitment to continuous improvement alongside your personal and professional development based on your roadmap to success. Following successful completion of your probationary period, you will undergo a progressive training programme to include the worlds most advanced, predictive maintenance technologies alongside High Voltage engineering. Compensation reviews will align with your engineering level, capability, and output throughout this process. Roles & Responsibilities: Someone who can actively promote efficient practices and adapt to meet goals and objectives within a team. Voice and implement continuous improvements across the range of the business Record accurately and in detail, technical information as necessary within the scope of a project. Resolve technical and non-technical obstructions within a working project in a timely manner. This list is not exhaustive, and you may be required to undertake other responsibilities. Key Technical Skills Required: Experience with varying vintages and types of electrical systems and equipment. 2391 (or equivalent) Qualified with Inspection & Testing experience Good understanding of modern test equipment for all uses. Good understanding of BS7671 as amended 2018, especially modern technical terminology. Experience with fault finding on electrical systems (preferred but not essential) Key Skills: General: Good interpersonal and communication skills Organised Responsible and accountable Good problem-solving skills Good paperwork and documentation skills Keen eye for detail Ability to adapt to various environments with varying clients needs Experience with risk assessments and safe working practice. If you are ready to thrive in a fast-paced, high-performance setting, this is the perfect opportunity for you. Join us, become part of our team, and assist in achieving the electrical, technical goals of the business. We are an equal opportunities employer and welcome applications from all walks of life. TPBN1_UKTJ

Appliance Service Engineer (Laundry / White Goods) Territory: Watford, High Wycombe, Uxbridge, St Albans, Luton Circa £36,000 Basic DOE + Overtime (1.5x Monday - Saturday, 2x Sunday OTE Approx. £4,000 to £6,000 Extra) + Call Out (1/6 Weekends) + Monthly Bonus Scheme + 28 Days Holiday + 8 Bank Holidays + Company Pension + Private Medical +Company Vehicle + Mobile Phone + Tablet Monday to Friday 42.5hpw Are you a domestic appliance white goods engineer looking to step away from domestic and join a company working on commercial equipment? Due to continued sales growth a Commercial Appliance Service Engineer is required to join the team of a market leading manufacturer and service provider of commercial industrial laundry equipment. This is a great opportunity to join a reputable company who truly values and celebrate their team whilst offering job security. This role would suit candidates with experience working on white goods equipment or similar backgrounds. Ideally you will be gas qualified, however, the company can provide training for this. The successful candidate will attend reactive breakdowns and provide routine maintenance to commercial laundry equipment at customer sites, working to a First Time Fix target upwards of 85%. The ability to work on Industrial equipment may also be available, depending on experience and training. The Field Service Engineer Role · Carrying out electrical and mechanical repairs and maintenance on a full range of laundry equipment · Working in a 1 - 1.5 hours radius from your home, averaging 3 to 4 jobs per day · Working with 3 phase electrics · Working on commercial laundry equipment in care homes, hotels, charities, gyms etc. The Field Service Engineer Candidate: · Electromechanical background · Able to work efficiently to rectify breakdowns and to work accurately to PPM schedules · Electrical competence including the ability to dead test and carry out safe isolation

Service Engineer / Commercial Laundry Equipment – Manufacturer Basic from £36,000 / £45,00O OTE / 42.5hr working week / 33 days Holiday / Van for personal use! We are a leading Manufacturer within the commercial laundry industry with a team of more than 800 loyal employees. Due to company growth, we are now seeking new engineers to join our team to help cover our client base throughout hospitals, hotels and care homes just to name a few. Key Responsibilities Service, maintenance, and repair of commercial laundry equipment: Washing Machines and Tumble Dryers Fault Finding on electrical commercial laundry equipment Field based meeting clients - Customer facing position Onsite client training of products Essential Qualifications / Experience Recent experience as a Field Service Engineer working on either White Goods OR Laundry OR as Electromechanical engineer Domestic ACS Gas Safe Qualifications (we can then cross train you on to commercial laundry) CCN1 Commercial ACS Gas Laundry Qualifications: CLE1 / LAU1 / CCLNG1 Full Driver’s Licence Knowledge of electrical safety Package Basic salary from £36,000 - £38,000 (on qualifications) 42.5-hour working week Paid door to door Performance bonus scheme (based on first fix) – OTE £45,000 On call 1 in 4 weekends with £25 per day standby allowance Overtime rates paid at 1.5 Saturday & double time Sunday & Bank Holidays 33 days holiday including 8 bank holidays Private Medical Insurance 5% Pension contribution Van – for personal use too! Tablet Mobile Phone Tool Kit Sick Pay Scheme Full Product Training If this position is of interest to you, please call Georgia Bailey @ CV Bay on (phone number removed) #ENG1

Trainee Meter Technician Utilities North London No experience needed + £28,600 + £4,000 Bonus + Full Training + Progression + Vehicle + Enhanced Pension + Excellent Package Are you ready to start a career with full training and endless opportunities to progress in the energy sector? Do you want to grow your career with a company that offers full training, a clear progression path, and the chance to work with cutting-edge technology? The company has built a stellar reputation within the energy sector over the past five years and is looking to hire trainee meter technicians to join their growing team. You'll receive full training before visiting meter locations across North London postcode areas. Your duties will include planning your route, taking meter readings, and reporting any issues, all while providing excellent service to customers. The role has a strong focus on electrical work, with the chance to train as a HV metering installer or EV specialist. The 12-month training program through this companies Engineering Academy offers ample progression into various roles. You'll travel to customer sites across the assigned postcode areas and be provided with a van, including EVs and automatic models. Once trained, you can work remotely, but regular site visits will be required. The ideal candidate will be open, honest, and career-driven, with a strong desire to progress. Previous experience in a field-based or driving role, such as delivery drivers from Sainsbury's, Tesco, or meter readers, is a plus, but the right attitude is most important. The role requires a full, clean driving license and the ability to manage your own schedule. The Role: Full training provided to become a Meter Data Technician (MDT) with progression opportunities. Traveling to customer sites across North London areas. Opportunity to work with EV vans, including automatic and multi-EV models. Clear career progression with the chance to move into electrical, HV metering, or EV specialist roles. The Person: Open, honest, and driven with a strong desire to progress in their career. Previous experience in a field-based or driving role (e.g., delivery drivers or meter readers) is beneficial. Comfortable working independently and managing their own schedule. Must have a full, clean driving license. Enthusiastic, career-focused, and ready to grow within the company. BH:(phone number removed) To apply for this role or to be considered for further positions, please click Apply Now or contact Maleek Randley at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Mechanical Site Engineer Location : Tottenham (with nationwide travel) Salary: £40,000 - £45,000 (including overtime premium) + benefits About the Role We are seeking a dynamic and motivated Mechanical Site Engineer to join a fast-paced site-based team within a market-leading pumping solutions business. Working alongside an Electrical Site Engineer, you will be responsible for the installation, commissioning, servicing, and maintenance of pumps and associated equipment across customer sites nationwide. This is an excellent opportunity for an enthusiastic individual who values teamwork, flexibility and long-term career development. Key Responsibilities Attend nationwide installations and breakdowns when required Service, repair, and assemble pumps and pumping equipment Ensure call-out and site procedures are followed at all times Complete site reports after each visit, obtain customer signatures, and submit promptly Act as a professional ambassador, promoting products and services Ensure company vehicle, tools, and van stock are maintained Follow all company procedures and contribute to continuous improvement Observe and maintain Health & Safety standards Undertake additional duties as required by the business Requirements Knowledge & Experience Knowledge of the pumping or mechanical engineering industry Experience in a similar mechanical, site engineering, or maintenance role Pump-related experience is desirable Qualifications (Essential or Desirable) Mechanical qualification ( Essential ) CSCS ( Essential ) Confined Space Training* ( Desirable ) First Aid* ( Desirable ) SSSTS* ( Desirable ) *Training can be provided if not already held. How to Apply If you are interested in becoming part of a growing and forward-thinking engineering team, please contact Becky Kerridge on 01254781300 or simply email with your current CV. TPBN1_UKTJ

This role would suit electricians or electrical engineers with panel building / wiring experience, looking for training. Panel Wirer / Electrical Fitter* Building complex electrical systems* Willing to work regular overtime (. Electrical Fitter (Multiple hires) - Training and Progression.

T License and are looking to improve your skillset through training in electrical qualifications to allow you in increase your earnings at a company that has been a household name for generations?On offer is an excellent opportunity where you will be start of shadowing, whilst at the same time be pu

Mechanical & Electrical Technical Trainer (Full Training Provided) Enfield £40,000-£50,000 + 28% pension + full training provided + days-based role + 37 hours per week + 54 days holiday + excellent benefits Excellent opportunity for an engineer with strong mechanical, hydraulic and ba

Mechanical & Electrical Technical Trainer (Full Training Provided)Enfield£40,000-£50,000 + 28% pension + full training provided + days-based role + 37 hours per week + 54 days holiday + excellent benefitsExcellent opportunity for an engineer with strong mechanical, hydraulic and basic electric

Plant Fitter (Electrical Training) £40,000 - £45,000 + Overtime OTE 60K + Training + Overtime + Career Progression Llandrindod WellsAre you a Plant Fitter looking to join a long-standing, established family run business offering a wide range of training on electrics and diagnostics, alongside a cl

A respected training provider is seeking an Electrical Installations Assessor to support apprentices in Gloucester/Cheltenham. Ideal candidates should have industry experience, a minimum Level 3 qualification in Electrical Installations, and strong communication skills. The role offers full assessor

Electrical Engineering Expert - AI Training (Remote, Freelance). Create and refine text, data, or questions for AI training in circuits, signal processing, and electromagnetism. Bachelor’s or Master’s in Electrical Engineering or related field, or equivalent experience.

A leading training provider in engineering based in the United Kingdom is seeking an Electrical Engineer aspiring to become a Lecturer and Trainer. The role offers an attractive salary starting from £36,000 with opportunities for progression, full teacher training, and various benefits including a

Electrical Design Engineer (Training on EPLAN) Peterborough £40,000 - £50,000 (OTE £60,000) + Progression + Performance Based Bonus (10 - 15%) + Overtime + Training. Are you an Electrical Design Engineer looking for a role within a globally recognised company offering a range of training and over

Electrical Bias Maintenance Engineer (Days Only). Due to continued growth, they are seeking a skilled Electrical Bias Maintenance Engineer to join their day shift team. Continuous Training & Development on new and existing machinery.

A leading engineering firm in the UK is seeking a Maintenance Engineer with both electrical and mechanical skills. The position offers excellent training, a competitive salary starting at £60,000, and a range of employee benefits including a signing bonus and opportunities for progression. Ideal ca

Are you an Electrically biased Engineer, looking to join a global food manufacturer who will invest into your technical career through further training and offer long term progression where you will benefit from an excellent benefits package and a great work life balance with no weekend work or nigh

Electrical Design Engineer (Intermediate – Principal grades). Our client is looking for Electrical Engineers to join their growing team in Rhyl to support long–term delivery on the Welsh Water framework. Design and deliver electrical infrastructure including clean and wastewater treatment works.

Our client is a respected consultancy who are looking to grow their established Water team in the South of England with Electrical Engineers from Intermediate to Principal grade. As an Electrical Engineer you’ll work closely with multi-disciplinary teams from across the wider Water Business to del

An established industry player is seeking a dedicated Maintenance Engineer with an electrical bias. The role offers comprehensive training and progression opportunities within a leading industrial company known for its commitment to quality.

A global engineering firm based in Peterborough is looking for an Electrical Design Engineer to design MCC panels and support manufacturing processes. The ideal candidate will have a strong electrical bias and experience in design engineering.

The company offers progression, training, and a supportive environment focused on career development within the electrical engineering sector. A well-established switchgear manufacturer in Dartford seeks a Junior Electrical Design Engineer.

A leading manufacturing firm in Stoke-on-Trent is seeking a Maintenance Engineer to provide electrical maintenance on industrial machinery. Candidates with any level of experience are encouraged to apply for this varied position that focuses on both electrical and some mechanical duties.

A specialist engineering firm in the United Kingdom is seeking an Electrical Maintenance Engineer to join their team. The role offers a competitive salary ranging from £38,000 to £46,000 along with significant training, optional overtime, and bonuses.

A leading recruitment agency seeks a Project Manager with an Electrical or Fire & Security background. This hybrid role includes managing projects from cradle to grave, offering ample training and opportunities for career progression. The ideal candidate will have experience in the electrical/fire &

Are you an experienced Electrical Assessor looking for a new contract role? This is an exciting opportunity to join a respected education provider delivering assessments and supporting learners to achieve their electrical qualifications. Onsite Electrical Assessor (Contract). Conduct onsite electric

A well-established recruitment agency is seeking a Graduate Electrical Design Engineer to work on innovative environmental engineering projects in Chippenham. The position offers a salary of £25,000 - £35,000 plus additional benefits such as training, overtime, and an early finish on Fridays. The

An established industry player is seeking a skilled Electrical Workshop Engineer to enhance their team. This position offers a chance to grow your skills in a supportive environment, with training opportunities and a commitment to safety and quality.

Electrical Maintenance Engineer Further Training • Devon. Electrical Maintenance Engineer (Further Training). Working as part of a team with further technical training.