Engineering jobs in FlintCreate job alerts

Role: -Multi-Skilled Shift Engineer Location: -Deeside Shift: -4 on 4 off shift (12-hour shifts 2days/2 nights) Salary: £50,000 per annum Benefits: -Pension, life assurance, subsidised canteen and discounted staff shop, learning platform, free parking & career progression opportunities. Are you a hands-on engineer who thrives in a fast-paced manufacturing environment? We are looking for a Multi-Skille... ZIPC1_UKTJ

Process Engineer Industrialisation & Manufacturing Systems Location: CheshireSector: Aerospace / Advanced ManufacturingContract: 9 Month contract Inside IR35 Pay rate: £32.13ph Umbrella or £24.01ph PAYE About the Role We are supporting a major aerospace programme in the appointment of a Process Engineer to play a key role in embedding industrial and manufacturing requirements into product design right from the early development phases. This position sits at the heart of concurrent engineering, working closely with Design, Industrial Architecture, Manufacturing Engineering, and Supply Chain to ensure robust, efficient, and production ready solutions are delivered. You'll be involved from initial principles through to handover into serial production, leveraging the latest digital manufacturing technologies including 3DEXPERIENCE (3DX). Key Responsibilities • Create and maintain Industrial Dossiers and documented build processes up to handover into the serial planning phase, • Influence product design to ensure manufacturability, cost, quality, and lead-time objectives are achieved, • Derive manufacturing process instructions concurrently alongside product design, • Review, influence, and support approval of the Design Data Set (DDS), • Drive manufacturing maturity for new technical and industrial solutions, • Support the development and evolution of the Manufacturing System, • Produce Component Delivery Specifications (CDS), • Work closely within Multi-Functional Teams (MFTs) to identify, analyse, and resolve technical and industrial issues, • Support Manufacturing Engineering inputs to Calls for Tender, including tooling and industrialisation packages, • Ensure compliance with Health & Safety standards and regulations About You • Strong knowledge of wing manufacturing and aerospace production processes, • Experience developing build philosophies, industrial dossiers, and work instructions, • Confident interrogating engineering drawings, specifications, tooling, and technical documentation, • Good understanding of product development and design to manufacture processes, • Experience working within multi-functional engineering environments, • Comfortable influencing stakeholders across design, manufacturing, and supply chain, • Exposure to digital manufacturing tools, ideally 3DEXPERIENCE (3DX), • Organised, delivery focused, and able to manage multiple priorities Why Apply • Opportunity to work on a high profile aerospace programme, • Strong visibility across design, manufacturing, and industrial teams, • Exposure to advanced manufacturing technologies and digital tools, • Competitive rate or salary depending on experience, • Collaborative and technically challenging environment Interested?If you'd like to discuss the role in confidence or receive further details, apply below! This vacancy is being advertised by Belcan

MERITUS are recruiting for a Quality Lineside Engineer to join our Aerospace client at their Broughton site. QUALITY LINESIDE ENGINEER - INSIDE IR35 - £39.55 PER HOUR - DOUBLE DAY SHIFT - UNTIL 10/11/2026 - LIKELY EXTENDED - 1 STAGE INTERVIEW PROCESS An opportunity has arisen for an individual to join a Quality team within a major UK-based aerospace manufacturing environment as a Quality Lineside Engineer. The successful candidate will support the evaluation, coordination, and monitoring of achieved levels of conformity across product, process, and service delivery within the business. Key Responsibilities • Provide specialist Quality support and advice on drawings, parts, processes, and support services, ensuring that Quality requirements are independently assured., • Ensure adherence to the Quality Management System through surveillance activities across the business., • Verify that certification processes are consistently defined and applied., • Coordinate and lead resolution of reported quality and technical issues from internal teams and customers, ensuring appropriate corrective and preventive actions are implemented by the accountable function, and that originators are kept informed., • Perform initial investigations (e.g. events, quality logs, non-conformities) to assess probable root cause, ensuring timely escalation and corrective/preventive action through cross-functional problem-solving activities., • Conduct investigations into deficiencies identified during process confirmation activities, ensuring root cause is understood and corrective/preventive actions are implemented., • Compile and present Quality performance overviews to the relevant leadership team.Required Skillset, • Ability to interpret engineering drawings., • Strong problem-solving capability using recognised methodologies (e.g. PPS, 5 Whys, Ishikawa)., • Effective interpersonal skills, with the ability to challenge constructively while maintaining strong working relationships., • Data analysis capability, including interpretation of datasets and graphical information to draw conclusions., • Ability to work effectively within integrated, cross-functional teams in an operational environment., • Background in Quality or Engineering within a large-scale manufacturing environment (desirable).Key Qualities, • Customer-focused mindset, • Commitment to product safety, • Support for non-conformance reduction initiatives, • Team-oriented approach, • Proactive attitude, • Adaptability

Quality Lineside Engineer - Nightshift Contract up to November 2026 Based in Broughton Offering £32.96 + shift uplift Do you have experience within highly regulated environments such as Aerospace, Defence, Automotive? Do you have experience dealing with Non-Conformity? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Quality Lineside Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Provide specialist Quality support and advice on drawings, parts, processes, and support services, • Independently assure that Quality requirements have been met, • Assures that the Quality system is being adhered, • Assures that certification processes are consistently defined and applied, • Coordination and leadership of reported quality/technical issues from business teams and customers, • Ensure that appropriate corrective and preventive action is taken by the accountable function, • Perform initial investigations (e.g., Events, QLB's, NC's) to assess probable root cause, • Compile and Present Quality overview to the leadership team within the business area Your skillset may include: • Ability to interpret drawings, • Ability to problem solve and use associated problem-solving tool sets (PPS, 5Y, Ishikawa etc.), • Data analysis skills - interpret data sets, graphical data, and draw conclusions, • Quality or engineering based background within a major manufacturing industry. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Quality Lineside Engineer - Nightshift Contract up to November 2026 Based in Broughton Offering £32.96 + shift uplift Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

MERITUS are recruiting for an Automation & Metallics Engineer to join our client in the aerospace sector on an initial 12 months contract from their site in Broughton. AUTOMATION & METALLICS ENGINEER - INSIDE IR35 - £38.40 PER HOUR (25% UPLIFT FOR OVERTIME) - 12 MONTHS - BROUGHTON, FLINTSHORE - SINGLE STAGE INTERVIEW PROCESS - SECTOR: AEROSPACE The deployment and support of automated machinery for the assembly of aircraft wing structures and sub-assemblies. Assembly processes include drilling, fastening, cold-working and sealing. The scope of automated assembly machinery ranges from large Cartesian machines and industrial robots to lightweight solutions and collaborative robots (cobots). PUWER requirements for the safe introduction of new machinery Core activities include: Defining new machinery Developing new automated assembly processes Project management Providing technical support to existing machinery Skill Requirements Degree level qualification (or equivalent) in Engineering. Experience in the fields of automation and/or robotics. Knowledge of the production processes used in Broughton. Knowledge of PUWER & REACH legislation. Project Management. Proficient digital and data analysis skills. Experience with statistical or data analysis software tools e.g., Minitab, Skywise. Problem solving (including PPS). Good communication and stakeholder management skills.

Manufacturing Engineer 12 month contract Based in Broughton Offering £40.13ph Inside IR35 Do you have experience using SAP? Do you have experience working within the Aerospace/Avionics industry? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Define and write assembly work processes, create specifications for assembly tools, and define methods for implementing modifications in production, • Create and ensure the consistency of manufacturing engineering dossiers with design dossiers, • Launch parts and assembly items, provide on-site support, and prepare additional manufacturing engineering work instructions for disruptions or breakdowns, • Analyse and use anomaly statuses from deviation measurements, optimise procedures, and write concessions., • Participate in defining the product and its production and verification methods, and contribute to industrial work-sharing, • Propose a Design/Production breakdown to maintain consistency between reference elements, define manufacturing schedules, and specify interfaces, • Analyse design dossiers and issue queries when necessary. Your skillset may include: • Strong knowledge of assembly systems, machining processes, and/or manual assembly methods, • Experience in work preparation/industrialisation, • Demonstrated experience in MS Office/Google Workspace, • Experience using SAP for work preparation If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Manufacturing Engineer 12 month contract Based in Broughton Offering £40.13ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Service Engineer (Field & Site-Based) UK Wide (occasional travel to Ireland) We are recruiting for a Service Engineer to join a specialist engineering business operating within the food manufacturing and packaging sector. This is a hands-on role combining both on-site installation work and field service support, offering variety and technical challenge. Working Hours • Monday to Friday, • 8:30am - 4:30pm, • Panel wiring and electrical assembly (site-based work), • Service, maintenance, and repair of food and packaging machinery, • PLC fault finding and diagnostics, • Work with inverters, single-phase and three-phase motors, • Attend breakdowns and provide timely technical support, • Support installation and commissioning of machinery, • Ensure all work is carried out in line with safety standards Requirements, • NVQ Level 3 (or equivalent) in Electrical/Engineering discipline, • Background in manufacturing, ideally within the food industry, • Experience with PLC fault finding, • Strong electrical skills including panel wiring, • Knowledge of inverters and motors (single & three phase), • Full UK driving licence, • Willingness to travel across the UK and occasionally internationally Salary & Benefits, • Salary up to £40,000, • Company pension (NEST scheme), • Health scheme, • Company van provided for work use (not personal use), • 22 days holiday + bank holidays Training & Progression, • Product-specific training provided, • Opportunity to develop technical expertise within a niche sector, • Small team environment offering hands-on experience

Automation Engineer 12 month contract Based in Broughton Offering £38.40ph Inside IR35 Do you hold an NVQ Level 4 or equivalent? Do you have knowledge of PUWER and REACH legislation? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Automation Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • The deployment and support of automated machinery for the assembly of aircraft wing structures and sub-assemblies, • Assembly processes include drilling, fastening, cold-working, and sealing, • The scope of automated assembly machinery ranges from large Cartesian machines and industrial robots to lightweight solutions and collaborative robots (cobots), • PUWER requirements for the safe introduction of new machinery, • Defining new machinery, • Developing new automated assembly processes, • Project management, • Providing technical support to existing machinery Your skillset may include: • NVQ Level 4 qualification (or equivalent) in Engineering, • Experience in the fields of automation and/or robotics, • Knowledge of the production processes, • Knowledge of PUWER & REACH legislation, • Project Management, • Proficient digital and data analysis skills, • Experience with statistical or data analysis software tools e.g. Minitab, Skywise, • Problem solving (including PPS) If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Automation Engineer 12 month contract Based in Broughton Offering £38.40ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Lineside Engineer - Double Day Shifts 9 month contract Based in Broughton Offering £36.70ph Inside IR35 Shift Pattern - Week of mornings 6am - 1:10pm, Week of afternoons 1:30pm - 8:40pm Do you have experience as a Lineside Engineer? Do you hold an NVQ Level 3 or equivalent? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Lineside Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Accompany the production team / Autonomous Production Team (APT), • Support in identifying, analysing, and solving technical issues not directly manageable by the Operators & First Line Manager (FLM), • Provides an E2E perspective at the shopfloor level within the production team / APT, • Supports continuous production enablement by efficiently utilizing available resources & knowledge, • Contributes to the Operational Excellence targets within your area by adhering to the continuous improvement of operational processes, • Provide, create, and establish necessary work documents to shopfloor technicians to unblock lead time impact and unexpected workload, • Ensure interface management to relevant support functions needed, • Support in identifying NC on the shopfloor, • Support on identifying issues in production, • Support on the request for repair and the creation of specific requests for small tools, • Support on making EH&S rules transparent on the shopfloor If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Lineside Engineer - Double Day Shifts 9 month contract Based in Broughton Offering £36.70ph Inside IR35 Shift Pattern - Week of mornings 6am - 1:10pm, Week of afternoons 1:30pm - 8:40pm Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Maintenance Engineer (Manufacturing) £42,000 - £45,000 + Overtime OTE 55K + Training on Electrical + Funded Qualifications Flint Are you a Maintenance Engineer from a manufacturing, industrial or ex-forces background, looking to join a market leading company, offering a flexible 3 shift pattern, that will invest heavily in your development through fully funded electrical courses and in house training on PLCs to elevate your career? In this role you will be responsible for keeping production lines operational, with the overall maintenance of automation and metal manufacturing machinery. This will involve both mechanical and electrical maintenance on motors, gearboxes, sensors and control panels on a 3-shift rotation. This company has been operational since the 1950s, specialising in the niche production of specialist materials, supplying heavily into the aerospace, automotive and chemical industries and are vital for their continued operation. This role would suit a Maintenance Engineer with mechanical and some electrical experience looking for a 3-shift role, with full internal training on electrical systems including PLCs. The Role: • Maintenance of automation and manufacturing machinery, • Fault finding and maintaining gearboxes, motors, sensors, panels and PLCs, • 3 shift patterns: Monday to Friday, 6am - 2pm, 2pm - 10pm, 10pm - 6am, rotating weekly, • Overtime available at time ½ on weekdays and double Sunday, • Maintenance Engineer Maintenance, Maintaining, Electrical, Mechanical, Manufacturing, Industrial, Machinery, Engineer, Engineering, Faults, Fault Finding, Motors, Gear Boxes, Censors, Flint, Holywell, Chester, Buckley If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Tooling Engineer 12 month contract Based in Broughton Offering £32.13ph Inside IR35 Do you have experience with Jigs and Tools? Do you have experience of product development/design processes? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Tooling Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Develop the concepts and launch the industrialisation of Jigs and Tools assets (creation, development and modification) until final acceptance and handover to Operations, • Develop and integrate industrial technologies in collaboration with industrial architects and link R&D with functional requirements, • Support the development and implementation of the work breakdown structure and organisation breakdown structure, • Deliver signed-off tooling SOW/tech specs covering all launch activities as described by the work breakdown structure, • Ensure that the facility and manufacturing system design meets process requirements, • Ensure that all processes meet EHS/Quality regulatory requirements, • Ensure that the manufacturing system meets process capability requirements to build the product to design requirements, • Deploy lean manufacturing principles to develop effective manufacturing processes and establish a platform for continuous improvement, • Develop and implement effective processes to ensure manufacturing schedule and system requirements are met at all times, • Established robust interfaces, measures and processes with the programme teams to ensure that design data is delivered to manufacturing requirements (quality and time), • Ensure design support to manufacture is in place to support manufacturing operations, • Delivers overall tooling & equipment solution with integration supplier, • Supports R & T submission processes to secure development funding Your skillset may include: • Knowledge of wing manufacturing and operational processes to enable creation of build philosophies, • Variety of engineering technical skills, drawing interrogation, specifications parts, tooling and documentation, • Understanding of product development/design process, • Awareness of health and safety standards and regulations, • Stakeholder management, • Project management If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Tooling Engineer 12 month contract Based in Broughton Offering £32.13ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Process Engineer Location: Flint & Wigan Salary: £65,000 + Car Allowance + Pension + Bens Days Based Monday to Friday Reference: Jo7150/LW The Company An excellent opportunity has arisen with one of the Europe’s instantly recognisable manufacturers, a leading manufacturer, specialising in the FMCG marketplace.They have manufacturing facilities across Europe and are a secure and supportive organisation. They are currently looking to expand the process engineering maintenance capacity on site, within these automated manufacturing sites. Key Skills • Process Engineering Experience within a Manufacturing Arena, • Ideally from a Process Engineering or Similar HNC/Degree The successful applicant will have experience in process improvement, focused on statistical analysis of the machinery to optimise efficiencies and performance. Working on 2 sites, Flint and Wigan, you will need a working knowledge from an engineering point of view of process machinery, your background will be process/chemical engineering or similar in origin, and you will have experience of managing projects within an engineering process plant. Your role will be the link between all levels from manufacturing shop floor to director. This is a fantastic opportunity to be part of a world renowned group, which will lead to excellent career benefits and good technological development. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

MERITUS are recruiting for a Quality Conformance Engineer to join our large aerospace client on an initial 6 month contract as part of their Quality Development Programmes & Major Projects team. QUALITY CONFORMANCE ENGINEER - INSIDE IR35 - £39.55 PER HOUR - 6 MONTHS - DOUBLE DAY SHIFT - BROUGHTON, FLINTSHIRE - ONE STAGE INTERVIEW PROCESS - SECTOR: AEROSPACE An opportunity has opened within a Quality Development Programmes & Major Projects team at a large aerospace manufacturing site. This role offers the opportunity to develop skills and experience across Project Management, APQP application, Quality Standards, Industrial System Development, and Operational Quality Management. The position is responsible for leading and driving the resolution of complex quality issues and continuous improvement projects by setting measurement standards and identifying and facilitating improvements to increase: • Process performance and product adherence to standards, • Reliability of processes, • Repeatability of processes at initial design phase, prior to any process changes, and throughout the product lifecycle, • Prevention, surveillance, inspection, problem solving, and adherenceCore Mission, • Ensure full quality industrialisation of major modifications, synchronised embodiment programmes, incremental developments, full developments, and major industrial transfers to enable serial manufacture at current and ramp-up production rates, • Maintain strong focus on Production Organisation Approval (POA) activities to ensure a high level of product safety, • Provide quality input into all reviews including risk, cross-functional, planning, and stakeholder reviewsKey Responsibilities, • Apply and deploy APQP and relevant quality standards, • Support and facilitate Failure Mode & Effects Analysis (FMEA) across design, process, and machinery, • Create and update Control Plans to reflect modifications where required, • Plan and execute Production Process Verification (PPV) to validate manufacturing routings, • Lead Cost of Non-Quality forecasting and support mitigation activities, • Provide on-site production support for test campaigns and manufacturing during Start of Production phases, • Support cascade of Key Characteristics (KC) and Critical to Inspection (CTI) requirements from design and manufacturing engineering, • Support APQP activities including Decision Trees, Applicability Matrices, and Key Business Deliverable assessments as both owner and assessor

Join Boccard UK as we continue to grow in the nuclear energy sector. We’re hiring a QC Engineer to help uphold the highest standards of quality and compliance at our new, fully digital manufacturing plant in Deeside. With over 50 years of experience in nuclear energy, Boccard is a trusted leader in engineering, manufacturing, construction, and maintenance across the energy industry. As we enter a new era of nuclear innovation, we’re expanding our team to meet increasing demand. In this role, you’ll support the manufacture of carbon and stainless-steel pipe spools and support structures, carry out inspections in line with the Project Quality Plan, and work closely with QC Inspectors to ensure right-first-time delivery. You’ll also play a key role in promoting a culture of operational excellence and client satisfaction. What You’ll Do: • Implement and maintain the Project Quality Plan and Inspection Test Plans., • Review documentation, LTQRs, weld procedures, and calibration records for compliance., • Conduct audits, manage non-conformance reports, and support supplier approvals., • Liaise with clients, subcontractors, and internal teams to ensure quality standards are met., • Deliver quality awareness training and contribute to process improvements., • NCR (Non-Conformance Report) management, including root cause analysis and implementation of corrective actions What You’ll Bring: • Advanced knowledge of modern welding procedures, • Excellent communication skills with a good eye for detail, • Significant experience in working on pipe spooling contracts, • Knowledge of RCCM manufacturing specifications, • Computer literate and willing to train on internal digital platforms, • Previous Nuclear experience required, • Experience operating in a fast and high volume production environment, • CSWIP 3.1 - Preferred, • PCN Level 2 MPI – Preferred, • PCN Level 2 Radiographic Interpretation– Minimum, • Minimum of 5 years proven experience in NCR (Non-Conformance Report) management, including root cause analysis and implementation of corrective actions Why Boccard? Boccard is expanding its presence in the nuclear energy sector with a new digital facility in Deeside, a growing portfolio of secured long-term projects, and active involvement in next-generation reactor development. The company is focused on growth, with no plant shutdowns, and is investing in advanced technologies and infrastructure to support the future of clean energy. Benefits: • Employer Pension contribution scheme, • 25 days annual leave, plus bank holidays, • On-going investment in your training and development, • Employee Assistance Programme If you think this is the right role for you, please apply!

Maintenance Engineer - Food Manufacturing Multi Skilled 4 on 4 off (days and nights) Overview - Maintenance Engineer A leading manufacturer is looking to hire a maintenance engineer and is ready to onboard immediately. As a maintenance engineer, you will be joining a structured department where you will ensure the factory is running up to speed and production levels are maintained. With recent investment on site, this is a good opportunity for someone to join a growing site where the role will be varies across maintenance, reliability, improvements and project work. Working a 4 on 4 off shift, this will be perfect for someone looking for extended time off between shift rotations. Responsibilities for the Maintenance Engineer • Proactive maintenance and site PMs, • Reactive maintenance and responding to breakdowns quickly, • Working across both electrical and mechanical faults and maintenance, • Working on Engineering projects (e.g. commissioning, installations, relocations), • Identifying and implementing improvements covering both processes machine output, • Adhering to site Health & safety rules and legislation on site Requirements for the Maintenance Engineer • Time-served / recognised apprenticeship (or equivalent) in a relevant engineering subject, • Experience working in a Multi skilled role across mechanical and electrical engineering, • Ability to and experience of working to a fast pace, ideally confident in a manufacturing environment. If you’re interested in this opportunity and your CV is ready then hit the apply button and expect to hear from me soon. Alternatively, if you’re CV isn’t ready or you just want a quick chat about the role then give me (Gianni) a call on our company number. By applying to this advertised job, you give consent for The Sterling Choice Ltd to hold your information. Our privacy policy can be found on our website. At your request, this can also be sent to you.

Exciting engineering leadership role - Engineering Manager (NPI, Design, Technical). Over the years, the organisation has built a reputation for producing safety‑critical components and fabrication work, applying both manual and orbital welding techniques to meet demanding technical standards

How comfortable are you working with both electrical and mechanical systems, and what types of equipment or controls have you worked with before? Do you enjoy roles where every day brings a new technical challenge and the chance to work with advanced machinery while continuously developing your skills? The Opportunity • This is a shifts based role (rotational between days & nights), • This role offers long‑term stability, a supportive working culture, and the opportunity to work with a wide variety of machinery and technology. Your duties and responsibilities will be: • Provide first‑line maintenance support for machinery and appliance breakdowns., • Diagnose faults across electrical systems, mechanical assemblies, hydraulics, pneumatics, and CNC / machine‑tool equipment., • Read, interrogate, and interpret engineering drawings, wiring diagrams, and control system schematics., • Install and maintain 3‑phase electrical machinery., • Replace spindles, drives, and other key machine‑tool components., • Carry out reactive maintenance and planned preventative maintenance in accordance with PPM schedules and compliance requirements., • Support machine alignment, repair activities, and performance optimisation., • Coordinate with maintenance support teams regarding spare parts, requisitions, and inventory needs., • Complete all required documentation and maintain accurate, up‑to‑date maintenance records., • Mentor trainees and collaborate with colleagues to achieve operational targets. You will have the following qualifications & experience: • A relevant, time‑served industry qualification or apprenticeship., • Proven experience in maintaining CNC machinery & equipment., • Strong understanding of machine‑shop operations, metal‑treatment processes, and fabrication methods., • Experience working with milling machines or other large, complex machining systems. It’s great if you also have the following: • Experience supporting continuous improvement initiatives., • Confidence mentoring trainees or junior team members The setting for the role The site operates a 24/7 shift pattern averaging 42 hours per week and is a unionised environment.

As Site Maintenance Engineer, you’ll ensure that the office, depot, and associated facilities are maintained safely, efficiently, and in line with best practices and legislative requirements. Mechanical & Electrical Maintenance (Electrically Biased). Perform both planned and reactive maintenan

Electrical Engineer Deeside / Chester Area Days Automation/Controls/PLCs £49-56k + Quarterly Bonus Scheme + 10% Employer Pension Contribution + Private Medical = £57-68k package + annual salary review Samuel Frank is recruiting for an Electrical Engineer to a join a globally recognised manufacturing company with a large base in the Deeside / Chester area. Key aspects of the Electrical Engineer position include • Knowledge of PLCs, controls & automation. Whilst the Electrical Engineer wont be programming PLCs, knowledge of them and how they work and their coded is a key element of the role, • Lead a small team including an Electrical Supervisor and two Electrical Technicians, • Minimum qualification of HNC, ideally time served and must have hands on experience/background, • Knowledge of AC/DC inverter drives, • Hydraulics and pneumatics experience desirable, not essential, • An Electrical Engineer looking to further themselves and looking to gain Chartered status will be considered favourably (and will be supported in doing so by the business), • The role will be primarily office based (75%) as well as working on the shopfloor...

Location: Wrexham Shorterm Group are looking for electricians/ electrical engineers to work at Kellogg's plant in Wrexham. Location: Kellogg's plant Rates: £28 per hour CIS Hours: 7am-5pm 10 hours paid Tickets: JIB Gold, CSCS card, IPAF Duties: SWA work, control panels, power distribution, (Apply online only) AMP, 45KW blowers, instrumentation start date: ASAP Length of work: At least 8 weeks worth of work Please get in contact if you feel you would be a good fit for this role Email- (url removed)/ (phone number removed)...

Electro-Mechanical Maintenance Engineer Flintshire £43-50k DOE Monday to Friday All applications will be responded to within 48 hours MacGregor Recruitment have a great opportunity for an experienced Electro-MechanicalMaintenance Engineer/ Technician to join an established manufacturer based in the Deeside area that fabricates and supplies a wide range of PVCu windows and doors. Working as part of a small onsite maintenance team you'll provide reactive and planned maintenance support to minimise production interruptions and ensure that the plant operates effectively and safely. Maintenance Engineer role: • Carry out planned maintenance of equipment and general day to day maintenance activities., • Swiftly react to issues - identifying root causes of malfunctions and taking corrective measures, • Calibrate machinery to ensure precision, • Ensure adequate parts/supplies are available for maintenance activities., • Maintain records of maintenance, repairs and calibrations, • Work collaboratively with the Production team, training and providing support as required Skills & Experience: • Mechanical/electrical qualifications to HNC or equivalent is essenti...

Position: Maintenance Engineer - Electrical Bias Location: Flintshire Hours: Full-Time, Permanent · 12-hour shifts rotating Salary: £55,798 p/a + Overtime including bonus Role Overview Join the Site Engineering Team as an electrically biased Maintenance Engineer, focused on maintaining and enhancing plant performance. You will carry out predominantly electrical, with some mechanical, planned and reactive maintenance, installations, and repairs across key site areas. Your work will ensure equipment availability, product quality and compliance with HS&E standards, with a strong focus on electrical safety, control systems and Siemens PLCs. Key Responsibilities Perform predominantly electrical planned maintenance and breakdown repairs on production and site services equipment, including motors, drives, control panels and safety circuits, to maximise machine reliability. Fault-find on Siemens PLC-controlled equipment (S7/TIA Portal) and associated control systems, identifying root causes and implementing permanent corrective actions. Diagnose and resolve issues on automation, including sensors, encoders, VSDs/inverters, HMIs and safety relays. Example task: fault-find and rectify a Siemens S7-1500 controlled line fault using TIA Portal diagnostics and appropriate test equipment. Install, modify, upgrade and commission electrical equipment and machinery. Contact Details To apply or for more information, please contact Nicola at HR...

How comfortable are you working with both electrical and mechanical systems, and what types of equipment or controls have you worked with before? Do you enjoy roles where every day brings a new technical challenge and the chance to work with advanced machinery while continuously developing your skills? The Opportunity This is a shifts based role (rotational between days & nights) This role offers long‑term stability, a supportive working culture, and the opportunity to work with a wide variety of machinery and technology. Your duties and responsibilities will be: Provide first‑line maintenance support for machinery and appliance breakdowns. Diagnose faults across electrical systems, mechanical assemblies, hydraulics, pneumatics, and CNC / machine‑tool equipment. Read, interrogate, and interpret engineering drawings, wiring diagrams, and control system schematics. Install and maintain 3‑phase electrical machinery. Replace spindles, drives, and other key machine‑tool components. Carry out reactive maintenance and planned preventative maintenance in accordance with PPM schedules and compliance requirements. Support machine alignment, repair activities, and performance optimisation. Coordinate with maintenance support teams regarding spare parts, requisitions, and inventory needs. Complete all required documentation and maintain accurate, up‑to‑date maintenance records. Mentor trainee...

More About The Role Our sites are ever-demanding, complex and in some cases operate 24 hours a day - so it's vital we have a strong Engineering team who ensure our machines work to the best of their ability. So we can continue to provide great products to our customers, whilst still ensuring speediness. As a Electrical Maintenance Engineer, you will play a vital role in ensuring the smooth operation of our Manufacturing site. You will be responsible for the maintenance, repair, and improvement of our machinery and equipment, ensuring minimal downtime and maximum efficiency. This is a hands-on role that requires strong technical skills and the ability to troubleshoot and solve problems quickly. Reporting to the Site Engineering Manager your responsibilities will include: Conduct routine inspections and preventive maintenance on production equipment, identifying and resolving any potential issues before they cause disruptions Respond promptly to machinery breakdowns, diagnose the problem, and perform repairs or coordinate with external specialists when necessary Carry out machine adjustments and changeovers to support production line efficiency and minimise downtime Monitor and calibrate equipment to ensure accuracy, quality, and safety standards are met Collaborate with production teams to identify opportunities for process improvement and provide technical expertise to enhance productivity Keep accurate records of mainten...

As one of the Best Big Companies to Work For, we have a rich history of loving our customers and looking after our teams.We understand that success is achieved through our people, and we are searching for an experienced and visionary Cyber Security Architect to join our Cyber Security team.The succe

Job Title: Head of Engineering & Operations Location: DeesideSalary: £NEG DOE Overview We are recruiting an experienced Engineering & Manufacturing Manager to lead operations within a growing manufacturing environment. This is a key role focused on scaling production, improving processes, and project managing operational growth as the business expands. The successful candidate will combine strong technical knowledge with leadership and project delivery capability. Key Responsibilities • Lead and manage manufacturing and engineering operations, • Project manage expansion plans, including process improvements and capacity growth, • Drive continuous improvement and lean manufacturing initiatives, • Oversee production planning, quality, delivery, and cost performance, • Manage and develop teams across fabrication, assembly, and finishing, • Implement modern manufacturing technologies and automation, • Work cross-functionally with sales, procurement, and senior leadership, • Proven experience in manufacturing or engineering management, • Strong project management experience, ideally within a growing business, • Background in fabr...

Project Manager – Deeside / North West – Static Role - £57-60k + 10% pension + quarterly bonus + BUPA + 28 days leave + Bank Holidays + annual pay review Samuel Frank is recruiting for an experienced Project Manager from either an electrical or mechanical background to join a majo

Are you an engineer who has an interest in progression whether that's into a leadership role or controls engineer role? Are you a mechanically biased engineer looking for the opportunity to train electrically or an Electrical Enigneer looking for progression into automation roles? Then I have the role for you. This company offer the opportunity for further qualifications, PLC programming courses (Fully Funded) and other advanced training courses. Multi-Skilled Maintenance Engineer Salary: £54,000 + up to £2,000 annual bonus Shifts: 4 on / 4 off (Days and Nights) Benefits: 5% company pension contribution, 25 shift holiday days, tailored training & development plans Our client is a well-established manufacturing business that continues to invest heavily in both its people and its facilities. Most recently, they've committed over £4 million to install a brand-new production line — and they are now seeking a skilled Maintenance Engineer to join their team. The Role This is a fantastic opportunity to join a modern site with cutting-edge equipment. As a Multi-Skilled Maintenance Engineer, you'll be responsible for ensuring that production machinery and systems run reliably and efficiently. Working on a 4 on / 4 off shift pattern, you'll carry out both planned and reactive maintenance while supporting continuous improvement across the plant. Key Responsibilities • Carrying out pla...

NPI Configuration Engineer Full-time, Permanent Llay, Wrexham Competitive Salary & Company Benefits We are seeking a motivated and experienced Configuration Engineer who thrives in a fast-paced aerospace environment and enjoys problem solving, collaboration, and process improvement. If you have strong technical knowledge, excellent organizational skills, and a passion for supporting new product introduction, we’d love to hear from you. The Configuration Engineer will be responsible for supporting the creation, maintenance, and control of engineering data within the ERP system. You will play a key part in managing Bills of Material (BOMs), configuration control, and change management processes to support fluctuating manufacturing and assembly requirements. Working closely with engineering, production, and customer teams, you will ensure accurate and reliable information flow across programs and contribute to the successful introduction of new products. NPI Configuration Engineer Job Description Act as the main point of contact for all technical input into the ERP system Maintain and manage “As Planned” Bills of Material and associated changes Support change management and Technical Review Boards Evaluate and propose feasible solutions to engineering and design issues Provide configuration control and release management support Work collaboratively with internal engineering teams on technical queries ...

Key Responsibilities * Perform quality control inspections for piping works including fabrication, erection, fit-up, and welding activities * Ensure compliance with project specifications, drawings, and international standards * Conduct visual inspections (fit-up, welding, dimensional check

MERITUS are recruiting for a Process Planning Engineer to join our client on an initial 6 month contract from their site in Broughton, Flintshire. PLEASE NOTE: You must have demonstrable SAP experience on your CV in order to be shortlisted for the position. PROCESS PLANNING ENGINEER - INSIDE IR35 - £40.66 PER HOUR - 6 MONTHS - BROUGHTON, FLINTSHIRE - SINGLE STAGE INTERVIEW PROCESS Responsible for optimizing line balancing (SLB) and industrial sequencing to ensure on-time delivery within takt time and optimal resource deployment. Drive continuous improvement of manufacturing efficiency through performance monitoring, CVAT analysis, and reduction of efficiency losses (white/red space). Key responsibilities include: * Creating and maintaining PERT charts and Standard Line Balancing (SLB) to enable Production Pace Control (PPC). * Monitoring manufacturing performance, analysing gaps, and implementing improvements. * Reducing efficiency losses through white/red space and VA/NVA analysis, with focus on critical path optimisation. * Improving processes and serial allocated time through shop floor observation and data analysis. * Translating industrial requirements to design and supply chain, and assessing the impact of modifications. * Maintaining and governing the Standard Time Value (STV) database, ensuring ...

Are you a hands-on design engineer with a creative edge? Want to work on truly unique, customer-led projects from concept to completion? We’re hiring a Bespoke (BIAB) Design Engineer for one of the UK’s most established manufacturers. You'll lead the design of one-off truck builds – from catering fit-outs and custom interiors to chassis modifications and integrated electrical/gas systems. 🚀 What You’ll Be Doing: * Turn client concepts into detailed 2D/3D designs * Liaise with Sales, Distributors and Customers to refine and deliver bespoke solutions * Specify 12V, 230V, and LPG systems to current standards * Build BOMs, estimate costs, and ensure designs are right first time * Produce high-quality manufacturing drawings using SolidWorks 🛠️ What You’ll Bring: * SolidWorks 3D CAD and engineering drawing expertise * Creative thinking with a practical, hands-on approach * Excellent communication and customer liaison skills * Strong attention to detail and documentation * An understanding of assemblies, furniture design, and light electrical/gas installations 🎓 Requirements: * 5 GCSEs including English & Maths (Grade B or above) * Proven experience in SolidWorks (to be demonstrated at interview) * Experience in th...

We understand that success is achieved through our people, and we are searching for a committed and passionate Site Services Engineer to join our growing business on a permanent basis. We are looking for an experienced multiskilled engineer with an electrical background, qualifications and experienc

Pay and Benefits: * Role reports into the Head of Project Engineering * Package of £60-65k Salary * Pension contributions at 8% employer (increasing to x 9% after 5 years) * Bonus scheme at 10% (not guaranteed and based on business performance) * Life insurance x 2 base increasi

The Packaging Engineer is responsible for designing developing and implementing effective packaging solutions that ensure product safety and compliance with industry standards. Packaging Engineers need to actively listen to feedback from team members and stakeholders to address concerns effectively

More About The Role Our sites are ever-demanding, complex and in some cases operate 24 hours a day - so it's vital we have a strong Engineering team who ensure our machines work to the best of their ability.So we can continue to provide great products to our customers, whilst still ensuring spee

Maintenance Engineer - Shifts | Mon – Fri no weekends Location Deeside Salary £49,500 - £53,000 + pension + 26 days holiday + bank holidays + benefits Hours Mon – Friday 8 hour shifts – 6 – 2 | 2 – 10 | 10 – 6 * A genuinely superb & quite unique

An exciting opportunity has arisen for a Site Services Engineer to join a successful, forward-thinking company based in Deeside. As Site Maintenance Engineer, you’ll ensure that the office, depot, and associated facilities are maintained safely, efficiently, and in line with best practices and

Follow preventative maintenance routines and ensure all tasks are completed and recorded accurately. Mechanical Maintenance Engineer. Job Title: Mechanical Maintenance Engineer.

Maintenance Engineer While professional experience and qualifications are key for this role, make sure to check you have the preferable soft skills before applying if required. £40p/h Days / Nights Location: Flint gap technical are proud to be representing a market-leading manufacturing business in their search for an experienced Maintenance Engineer (Electrical Bias) to support operations at their site near Flint The Role Reporting to the Engineering Manager, you will play a key role in supporting the xrnqpay manufacturing process by responding to breakdowns, c Please click on the apply button to read the full job description

Project Engineer Deeside £60,000 - £64,000 + Quarterly Bonus + Private Healthcare + Pension + Retail Discounts + Annual Pay Review A great opportunity has arisen for a project engineer to join a highly skilled team in a company who are globally recognised for their loss prevention strategies. Enjoy working in a pivotal role that is focused on providing project xrnqpay support to benefit site development plan If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Please click on the apply button to read the full job description

You will take ownership of new product initiatives, working cross-functionally with Development, Operations, and Commercial teams to deliver high-quality, market-ready solutions.

Maintenance Engineer - Food Manufacturing Multi Skilled 4 on 4 off (days and nights) Overview - Maintenance Engineer A leading manufacturer is looking to hire a maintenance engineer and is ready to onboard immediately. As a maintenance engineer, you will be joining a structured department where you will ensure the factory is running up to speed and production xrnqpay levels are maintained. With recent investm All candidates should make sure to read the following job description and information carefully before applying. Please click on the apply button to read the full job description

Job Description Maintenance Engineer (Manufacturing) £42,000 - £45,000 + Overtime OTE 55K + Training on Electrical + Funded Qualifications Flint Are you a Maintenance Engineer from a manufacturing, industrial or ex-forces background, looking to join a market leading company, offering a flexible 3 shift pattern, that will invest heavily in your development through fully funded electrical courses and in house training... ZIPC1_UKTJ

Candidates should have a minimum of 5 years' experience in NCR management and be familiar with nuclear energy standards. Boccard UK Limited is hiring a QC Engineer to oversee quality and compliance at their new digital manufacturing plant in Deeside, Wales.

A manufacturing consultancy is seeking a Quality Engineer to drive continuous improvement across several sites in Sandycroft.

Are you ready to take ownership of a site where your engineering decisions directly impact safety, performance, and future investment?.Do you have proven hands?on experience maintaining large industrial refrigeration systems, particularly ammonia-based plant in a fast?paced industrial environment?.D

Refrigeration Engineer in the United Kingdom to join their specialist refrigeration team.This position offers autonomy and flexibility, with a strong focus on maintaining refrigeration systems vital for store operations.Ideal candidates will have NVQ Level 2/3 in Refrigeration & Air Conditioning and