Factory work jobs in WrexhamCreate job alerts

Test & Installation Engineer / Scientist We are recruiting a Test & Installation Engineer to work on advanced, high-performance mass spectrometry systems and associated preparation instrumentation used by leading academic, government, and industrial laboratories worldwide. This is a hands-on role where you will take newly assembled instruments and integrated sample preparation systems and turn them into fully commissioned analytical platforms ready to support cutting-edge scientific research. The Role • Test and fault-find complex mass spectrometry systems and associated instrumentation in line with documented procedures, • Perform functional testing of electronic assemblies, gas handling modules, and analytical subsystems, • Produce factory and on-site test reports, • Install and commission systems at customer sites worldwide (primarily USA, EU, China), • Deliver customer training both in the factory and on-site, • Provide technical support to service teams as required About You • Background in a technical discipline (e.g. physics, chemistry, electronics, engineering or similar), • Strong practical skills with electronics, instrumentation, or laboratory systems, • Experience working with analytical instrumentation, ideally in a laboratory or manufacturing environment, • Knowledge of chemistry or gas-based analytical techniques would be advantageous, • Experience with gas chromatography or gas handling systems would be beneficial, • Strong diagnostic and problem-solving skills, • Practical, hands-on approach with a flexible mindset, • Confident communicator, able to explain complex concepts clearly, • Comfortable with international travel and independent working You will be part of a global, values-driven organisation operating at the forefront of advanced analytical instrumentation. The Test & Installation team is exposed to almost every aspect of the business. Many engineers use the breadth of experience gained in this role as a springboard into other technical, commercial, or leadership positions. Sounds interesting? Please get in touch with Franziska Schlatt ().

Facilities Maintenance Engineer – Wrexham (Permanent) Starting Salary: from £35,000 Hours: Mon–Thu 08:00–17:15, Fri 08:00–16:15 (Approx. 21–23 non‑working Fridays per year) I'm currently recruiting for a Facilities Maintenance Engineer to join a well‑established manufacturing organisation based in Wrexham. This team plays a crucial part in delivering maintenance projects across the site, supporting production, moulding, and automation functions. If you’re hands‑on, solutions‑driven, and enjoy a varied engineering role, this could be a fantastic next step. The Role As a Facilities Maintenance Engineer, you’ll work closely with teams across the factory, providing both electrical and mechanical support. Your day-to-day responsibilities will include: • Electrical installation work, • Mechanical maintenance and installation in line with the company’s Safe System of Work and isolation procedures, • General facilities maintenance, including sourcing and managing contractors for multiple projects, • Working to a planned maintenance schedule while remaining flexible to support Production and Moulding Operations, • Making basic PLC adjustments where required, • Supporting energy-saving initiatives and improvements, • Attending and resolving production breakdowns, including maintenance on automation equipment What You’ll Need To be successful in this role, you should bring: • A strong motivation for developing your skills and technical knowledge, • Creative problem-solving abilities, particularly across electrical, plumbing, and mechanical systems, • Excellent organisation, attention to detail, and confidence managing repairs and improvement projects, • The ability to collaborate effectively across departments, with clear communication and a proactive, team‑focused attitude, • A commitment to working safely and taking ownership of tasks About You Ideally, you will have: • A completed HND in Mechanical or Electrical Engineering, • 18th Edition qualification, • Experience or knowledge of small building projects (e.g., plumbing, heating, boiler systems) Why Join This Business? This organisation offers a supportive and forward‑thinking environment with a range of opportunities, including: • Working with innovative technologies and contributing to exciting projects, • A collaborative and inclusive culture, • Strong career development and progression opportunities, • The chance to travel to other sites across the group, • An opportunity to play a meaningful part in shaping future operations Employee Benefits You’ll also have access to a comprehensive benefits package, including: • Competitive salary benchmarking with annual reviews, • Spring and Winter performance‑based reward reviews, • Onsite mental health champions + 24/7 confidential support, • Discounted gym memberships and corporate-rate dental services, • Long service awards, • Free eye tests for regular computer users, • Paid membership fees for professional qualifications, • 50% discount on a SimplyHealth healthcare cash plan

Facilities Maintenance Engineer - Wrexham (Permanent) Starting Salary: from £35,000 Hours: Mon-Thu 08:00-17:15, Fri 08:00-16:15 (Approx. 21-23 non-working Fridays per year) I'm currently recruiting for a Facilities Maintenance Engineer to join a well-established manufacturing organisation based in Wrexham. This team plays a crucial part in delivering maintenance projects across the site, supporting production, moulding, and automation functions. If you're hands-on, solutions-driven, and enjoy a varied engineering role, this could be a fantastic next step. The Role As a Facilities Maintenance Engineer, you'll work closely with teams across the factory, providing both electrical and mechanical support. Your day-to-day responsibilities will include: • Electrical installation work, • Mechanical maintenance and installation in line with the company's Safe System of Work and isolation procedures, • General facilities maintenance, including sourcing and managing contractors for multiple projects, • Working to a planned maintenance schedule while remaining flexible to support Production and Moulding Operations, • Making basic PLC adjustments where required, • Supporting energy-saving initiatives and improvements, • Attending and resolving production breakdowns, including maintenance on automation equipment...

Test & Installation Engineer Mass Spectrometry Systems We are recruiting a Test & Installation Engineer to support the build, testing, installation, and commissioning of advanced high-performance mass spectrometry systems and associated sample preparation instrumentation used by leading academic, government, and industrial laboratories worldwide. This is an excellent opportunity for a hands-on engineer or scientist who enjoys fault-finding, problem solving, and working with complex analytical instrumentation. The role offers international exposure and the chance to work at the forefront of scientific technology. The Role As a Test & Installation Engineer, you will be responsible for taking newly assembled instruments and integrated sample preparation systems and turning them into fully commissioned analytical platforms ready to support cutting-edge research. Key responsibilities include: * Testing and fault-finding complex mass spectrometry systems in line with documented procedures * Performing functional testing of electronic assemblies, gas handling modules, and analytical subsystems * Producing factory acceptance and site acceptance test reports * Installing and commissioning systems at customer sites worldwide (primarily USA, Europe, and China) * Delivering customer training both at the factory and on customer sites * Providing technical support to internal service teams when required * Supporting continuous improvement of test procedures and installation processes About You We are looking for someone with a strong technical foundation and a practical, problem-solving mindset. Essential skills and experience: * Degree, HND, HNC or equivalent experience in a technical discipline (physics, chemistry, electronics, engineering or similar) * Hands-on experience working with electronic or electro-mechanical systems * Strong diagnostic and fault-finding skills * Practical, methodical and detail-oriented approach * Strong communication skills with the ability to explain technical concepts clearly * Willingness to travel internationally as required * Ability to work independently and manage technical tasks on customer sites Desirable experience: * Experience working with analytical or laboratory instrumentation * Experience in a laboratory, manufacturing, or engineering environment * Knowledge of gas chromatography or gas handling systems * Experience with vacuum systems or scientific instrumentation Why Join? You will become part of a global, innovation-driven organisation operating at the forefront of advanced analytical instrumentation. The Test & Installation team works across multiple departments and technologies, giving exposure to almost every part of the business. Many engineers use the broad technical and commercial experience gained in this role to progress into senior engineering, product specialist, commercial, or leadership roles. JBRP1_UKTJ

C# Programmer / OT (Operational Technology) Applications Engineer Location: Wrexham Salary: £34,000-£40,000 Job Type: Permanent Hours: Monday-Thursday: 08:00-17:15 Working Fridays: 08:00-16:15 Join a Growing Automation Team Driving Global Innovation We are recruiting for an OT Applications Engineer to join a cutting‑edge automation department that is leading the charge in automating recycling processes across UK and international facilities. This team designs, builds, and implements bespoke automated equipment and production lines, leveraging the latest technologies such as 3D printing, industrial robots, cobots, smart factory tools, and Industry 4.0 systems. As part of a major digital transformation initiative, we are expanding the team to support continued innovation in operational technology and automation development. The Role As an OT Applications Engineer, you will design, develop, implement, and maintain OT applications and automation systems across both UK and overseas manufacturing sites. Your work will ensure seamless integration between OT applications, control systems, and wider IT platforms, while maintaining cybersecurity and operational performance. Key Responsibilities Application Development & Integration Configure and deploy SCADA, HMI, and MES systems Develop automation logic/scripts for PLCs and industrial controllers Build custom OT applications using C# and web‑ba...

Are you a Senior Design Engineer, eager to work on market leading equipment? Based in Wrexham, we're a global manufacturer and you'll be designing our production line equipment and be involved in the production phase of the project. We are a recognised brand who are constantly evolving in a progressive market. BASIC SALARY: £50,000 - £60,000 BENEFITS: · 20 non working fridays (on top of holiday allowance) · Enhanced employer pension contributions · Reduced gym memberships · Health cash back scheme · Employee assistance programme LOCATION: You'll be working from our factory based in Wrexham. COMMUTABLE LOCATIONS: Wrexham, Chester, Deeside, Oswestry, Ellesmere, Whitchurch, Crewe, Shrewsbury, Mold, Rhyl, Market Drayton, Nantwich, Runcorn, Liverpool JOB DESCRIPTION: Design Engineer, Mechanical Design Engineer - CAD, Print, Automation As our Design Engineer, you'll be involved in designing our market leading line equipment and fixtures in our UK and International facilities. You'll be involved from the design stage, right through to the build and implementation stages, so you can see your designs come to life. You'll be using SOLIDWORKS to develop designs. You'll also maintain detailed documents of designs, modifications and project progress. In this role you'll be: &midd...

Plant Facilities Maintenance Engineer £37,500 Mon-Thurs: 8:00 - 17:15, Fri: 8:00 - 16:15 Wrexham, North Wales gap technical are seeking a Plant Facilities Maintenance Engineer for our client based in Wrexham. The site is one of the company's award-winning manufacturing facilities in Europe. This is an exciting opportunity to join the Facilities Maintenance Department - a key function responsible for managing and implementing maintenance projects throughout the factory, supporting Production, Moulding, and Automation teams. Performance Objectives Provide electrical and mechanical support across multiple departments to maintain smooth operation of facilities and production systems. Carry out electrical installation, mechanical maintenance and installation work in line with company Safe Systems of Work and Isolation Policy. Undertake general facility maintenance and improvement of services, including managing and sourcing contractors for multiple projects. Work to a planned schedule of maintenance activities while maintaining flexibility to support Production and Moulding operations as required. Apply basic PLC programming knowledge to make minor program adjustments as needed. Identify and deliver energy-saving improvements and sustainability initiatives. Support TPM schedules and respond to production system breakdowns, including maintenance of automation equipment. Person Specification Apprentice Trained En...

Proactive Personnel are currently recruiting Industrial Hygiene Operatives for their client based in the Wrexham Area Job Details: * Clean and sanitise machinery, equipment, and factory areas to maintain safety standards * Carry out strip-downs, deep cleans, and reassembly of production equipment * Follow Cleaning Instruction Cards (CICs) and hygiene procedures at all times * Ensure safe use of cleaning equipment and chemicals in line with COSHH regulations * Prevent contamination risks and maintain high-quality standards for perishable foods * Work efficiently to meet deadlines while minimising waste (water, chemicals, energy) * Adhere to Health & Safety guidelines, including correct use of PPE * Report hazards, incidents, and safety concerns promptly Requirements: * Previous experience as an Industrial Cleaner * Commitment to quality, safety, and efficiency * Ability to follow procedures and work independently or as part of a team...

• C&I Engineer, • Salary: £60,000 - £75,000 (based on experience), • Permanent Opportunity In this role, you will support the delivery of Control & Instrumentation (C&I) design solutions for projects and work packages related to Core Process Technology (CPT). You will ensure deliverables align with the customer's functional requirements and agreed project standards and schedules. This is an exciting opportunity to work in a technically advanced engineering environment, collaborating with multidisciplinary teams and international suppliers. Key Responsibilities • Maintain the highest standards of health, safety, and environmental compliance, • Produce detailed technical specifications, including:, • Develop control system design specifications and simulation programs, • Generate hardware specifications for control systems, • Work closely with subcontractors, including reviewing and approving detailed design drawings, • Review suppliers' test specifications and attend factory acceptance tests, • Collaborate with section engineers and specialists to ensure successful delivery of engineering requirements, • Present technical information during design and technical reviews, • Conduct customer-facing presentations, demonstrations of equipment, or software, • Analyse plant process, commissioning, and test data to identify performance improvements, • Develop and maintain core design standards for control system engineering, • Contribute to project proposals, including cost estimates and schedules, • Manage project deliverables and provide status reporting to stakeholders, • Travel to European suppliers and ETC/customer sites when required, • Equipment functional specifications Essential • Degree in Electrical Engineering, Electronic Engineering, or a related discipline, • Experience specifying or designing control systems within process industries, • Ability to produce high-quality technical specifications and reports, • PLC hardware (I/O capability, communications networks, power requirements), • Control cabinet design, • Instrumentation design (measurement techniques, ranges, accuracy, EMC), • PLC programming standards, • SCADA design, configuration, and alarm management, • Experience with equipment testing and validation, • Familiarity with compliance standards such as UKCA, CE, and UL, • Experience working in multinational engineering organisations The company offers a competitive salary and attractive benefits package, including: • Company performance bonus, • 25 days annual leave (rising to 28 days after 6 years' service), • Individual Private Healthcare. ‎, • All statutory Bank Holidays., • Optional Working from home up to 2 days per week (subject to security and business need), • One additional day-off every 4 weeks, • Generous flexi-time, • Flexi day-off once per month subject to accumulated working hours, • Company Sick Pay JBRP1_UKTJ

Great opportunity to work as a FLT Operative for our client, a professional yet friendly company who specialises in making and developing chilled meals for the top UK supermarkets, making over 3.7million chilled meals every week. Staffline is recruiting FLT Operatives in Wrexham. The rate of pay is: - £12.43 per hour rising to £13.74 per hour for days - £14.81 per hour for nights This is a full-time role, and the hours of work are: - 4 on 4 off, 6am to 6pm - 4 on 4 off, 6pm to 6am Your Time at Work The responsibilities of a FLT Operative, your duties will include: -Supplying factory with ingredients and packaging Reach truck and Counterbalance FLT's - Using handheld scanners or RF guns - Reading labels and codes accurately - Spotting discrepancies (wrong item, damaged packaging) - Counting quantities correctly - Working with units, boxes, cases, pallets - Understanding pick lists, handheld scanner prompts - Following standard operating procedures - Working at a good pace without sacrificing accuracy. - Physically fit as Bending, lifting, and reaching is required - Using correct lifting techniques. - Following warehouse safety rules. Our Perfect Worker Our ideal FLT Operative: - Able to work in cold stores, minus 5 degrees. - Reliable - Hardworking - Trustworthy Reach / Counterbalance licence is required to undertake all tasks candidates with a c...

Automation Mechatronic Engineer - Wrexham (Permanent) I'm currently supporting a leading manufacturing organisation in Wrexham that is investing heavily in automation, innovation, and next‑generation engineering technology. This is an exciting opportunity to join a highly respected automation department that designs, builds, and implements bespoke automated equipment and production lines for both UK and overseas sites. In this role, you'll be involved in full‑lifecycle automation projects-from concept and design through to build, testing, and implementation. The team work with advanced technologies including 3D CAD, industrial robots, Cobots, 3D printing, smart‑factory systems, Industry 4.0, and emerging AI-driven solutions. This position is perfect for an engineer who thrives in a hands‑on, creative environment and enjoys delivering custom automation solutions that genuinely make an impact. The Role As an Automation Mechatronic Engineer, you'll play a key part in designing, developing, and implementing innovative mechatronic systems. You'll need a solid foundation in electrical engineering principles, PLC/HMI systems, industrial networks, and control panel design. Key Responsibilities Design & Development: Create electrical control systems, control panels, automation solutions, and detailed electrical schematics. PLC/HMI Programming: Develop, configure, and test PLC and HMI applicati...

Test & Installation Engineer / Scientist We are recruiting a Test & Installation Engineer to work on advanced, high-performance mass spectrometry systems and associated preparation instrumentation used by leading academic, government, and industrial laboratories worldwide. This is a hands-on role where you will take newly assembled instruments and integrated sample preparation systems and turn them into fully commissioned analytical platforms ready to support cutting-edge scientific research. The Role • Test and fault-find complex mass spectrometry systems and associated instrumentation in line with documented procedures, • Perform functional testing of electronic assemblies, gas handling modules, and analytical subsystems, • Produce factory and on-site test reports, • Install and commission systems at customer sites worldwide (primarily USA, EU, China), • Deliver customer training both in the factory and on-site, • Provide technical support to service teams as required About You • Background in a technical discipline (e.g. physics, chemistry, electronics, engineering or similar), • Practical skills with electronics, instrumentation, or laboratory systems, • Experience working with analytical instrumentation, ideally in a laboratory or manufacturing environment, • Knowledge of chemistry or gas-based analytical techniques would be advantageous, • Experience with gas chromatography or gas handling systems would be beneficial, • Strong diagnostic and problem-solving skills, • Practical, hands-on approach with a flexible mindset, • Confident communicator, able to explain complex concepts clearly, • Comfortable with international travel and independent working You will be part of a global, values-driven organisation operating at the forefront of advanced analytical instrumentation. The Test & Installation team is exposed to almost every aspect of the business. Many engineers use the breadth of experience gained in this role as a springboard into other technical, commercial, or leadership positions. Sounds interesting? Please get in touch with Franziska Schlatt ().

MB723: Electrical Maintenance Engineer Location: Wrexham Salary: £40,000 Working Hours: Mon to Fri 8am to 4.30pm + Overtime opportunities Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees Overview: First Military Recruitment is proudly working in partnership with a fantastic refrigeration business who are looking to recruit a Electrically Biased Maintenance Engineer to support the upkeep and maintenance of their internal factory plant equipment. This is a permanent position located at their depot in Wrexham. Duties and Responsibilities: Carry out work assignments issued and maximize effectiveness of the shift at all times by ensuring efficient completion of tasks. Demonstrate a team approach with regard to maintenance and hygiene of equipment and support (teams of) Logistics. Provide support to the team during breaks and absences and work together to ensure completion of their duties. Follow all work instructions, procedures, job descriptions at all times. Ensure that all Work Orders, PM’s issued to the shift are completed. Complete and check all necessary paper work. Work with other functions as part of the manufacturing team to ensure efficient running of the site and carry out prioritized work as agreed. Carry out the assigned activities to meet operational targets; working with other functions to ensure mutual objectives are met. Compliance with Company policies, procedures and regulations (e.g. attendance, quality, safety, GMP’s, etc.) and ensure these are followed to maintain the required standards (e.g. Food Safety, PPE etc.). Resolve mechanical and/or electrical problems in a timely fashion. Order spare parts as required on shift if unavailable from stock and contact contractors/suppliers as required in order to resolve problems on shift. Ensure all parts removed from stores while on shift are booked out of stores in the correct way. Where necessary, must initiate the purchase of parts or equipment completing the relevant order requisition forms with relevant information. Provide the Engineering manager with information on all engineering downtime attended on shift, related quality issue, work orders completed, PM’s completed and other details as required. Identify and analyse problems before crises and determine appropriate action and follow up. Ensure remedial works on site is raised by work order or PM’s are highlighted to the Manager. Work closely with Logistics teams. Work under supervision of engineering managers. Ensure that handovers are smooth and efficient whilst sharing relevant information with other engineers. Request/give information from/to the engineering manager.. Capable of instructing un-skilled/semi-skilled people in simple operations of equipment. Use of power tools, drills, grinders, cutting equipment, saws, files, presses. Use of ladders, steps, walkways. May have to work with hot/cold equipment using suitable safe systems of work and/or PPE. Skills and Qualifications: Previous manufacturing / processing / warehouse / cold-store industry experience. Electrical bias, electrical qualifications/time served apprenticeship. 4 years experience A good standard of both written and oral English. Basic Health & Safety. Data and analytical skills. Computer literate. (word/excel/windows based packages). Desirable skills: PLC knowledge. Working on hydraulic systems. Working on temperature control systems. Working with instrumentation systems. Welding experience. FLT/MEWP license. MB723: Electrical Maintenance Engineer Location: Wrexham Salary: £40,000 Working Hours: Mon to Fri 8am to 4.30pm + Overtime opportunities Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee share scheme , Employee shopping savings portal, Payment of Professional Fees

Panel Beater OTE: £50,000 Panel Beater Details Basic Salary: £38,000 - £42,000 Working Hours: 8:30am - 5pm - Mon - Fri Location: Wrexham Talented and efficient Panel Beater to join this leading team. For this Panel Beater role, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of a Panel Beater ·Work efficiently in a fast-paced accident repair centre ·Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Skills and Qualifications of a Panel Beater ·You will have served a recognised apprenticeship as a Panel Beater and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). ·You must have previous experience working as a Panel Beater within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. ·You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this Panel Beater role, please contact Chris @ Auto Skills and state reference job number 52260 Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this Panel Beater role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: Panel Beater, Panel Technician, Vehicle Panel Beater, Bodyshop Panel Beater

ENGINEERING SHIFT TEAM LEADER Job Title: Engineering Shift Team Leader Location: Wrexham Salary: £53,345 Shift: 2 Days / 2 Nights / 4 Off (Rotating) Job Role of the Engineering Shift Team Leader We’re looking to appoint an Engineering Shift Team Leader to join a well-established FMCG manufacturing site operating within a fast-paced, high-volume environment. The business is continuing to grow and offers strong long-term stability and progression opportunities. This is a key leadership role where you will be responsible for leading the engineering team on shift, ensuring maintenance activities are delivered effectively and supporting the smooth running of production operations. You will be responsible for coordinating maintenance activities, driving performance and ensuring compliance across all engineering functions on shift. Sector – Factory Maintenance (FMCG / Food Manufacturing) Non-Negotiable Requirements of the Engineering Shift Team Leader • Multi-skilled engineer with a background in a manufacturing environment. • Engineering qualification. • Previous experience in a leadership or supervisory role. Requirements for the Engineering Shift Team Leader • Experience leading and supporting an engineering team • Strong understanding of planned and reactive maintenance (CMMS systems). • Ability to drive continuous improvement and root cause analysis. • Experience planning and allocating work to support production. • Hands on Engineering experience • Strong understanding of health & safety, GMP and site compliance standards. • Experience managing contractors, permits to work and shift resources. • Strong communication and organisational skills. Desirable Requirements for the Engineering Shift Team Leader • Experience within an FMCG or food manufacturing environment. • Experience supporting audits, NCRs and compliance activities. The Engineering Shift Team Leader will benefit from: • Working for a well-established and growing manufacturing business. • Competitive salary up to £54,(Apply online only). • Structured shift pattern offering strong work-life balance. • Long-term progression opportunities within the site. • Stable and supportive working environment. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Savannah Wells at Pioneer Selection - / (phone number removed) As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

Great opportunity to work as a FLT Operative for our client, a professional yet friendly company who specialises in making and developing chilled meals for the top UK supermarkets, making over 3.7million chilled meals every week. Staffline is recruiting FLT Operatives in Wrexham. The rate of pay is: - £12.43 per hour rising to £13.74 per hour for days - £14.81 per hour for nights This is a full-time role, and the hours of work are: - 4 on 4 off, 6am to 6pm - 4 on 4 off, 6pm to 6am Your Time at Work The responsibilities of a FLT Operative, your duties will include: -Supplying factory with ingredients and packaging Reach truck and Counterbalance FLT's - Using handheld scanners or RF guns - Reading labels and codes accurately - Spotting discrepancies (wrong item, damaged packaging) - Counting quantities correctly - Working with units, boxes, cases, pallets - Understanding pick lists, handheld scanner prompts - Following standard operating procedures - Working at a good pace without sacrificing accuracy. - Physically fit as Bending, lifting, and reaching is required - Using correct lifting techniques. - Following warehouse safety rules. Our Perfect Worker Our ideal FLT Operative: • Able to work in cold stores, minus 5 degrees. - Reliable - Hardworking - Trustworthy Reach / Counterbalance licence is required to undertake all tasks candidates with a current licence preferred, but training can be provided. Key Information and Benefits • Earn £12.43 - £14.81 per hour - Temp to perm opportunity - OnSite support from Staffline - Canteen on site - Free car parking on site - Free food - Free hot drinks - PPE provided - Opportunities for overtime - Full training provided Job Ref: 1OMW About Staffline Staffline is the UK's leading provider of flexible, temporary and permanent workforce solutions, enabling over 28,000 people into good work every day. We operate at more than 350 customer sites across England, Scotland and Wales. Please note that our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. This job advert may not be copied, imitated or used, in whole or in part, by third-party websites, without prior written consent from Staffline. TPBN1_UKTJ

To lead and execute complex capital projects within a high-care food manufacturing environment. You will be responsible for the end-to-end delivery of infrastructure upgrades, including ETP upgrade, , road junction improvements, general building works, and preparing facilities for advanced machinery installations while ensuring strict adherence to CDM 2015 regulations. Key Responsibilities Site & Infrastructure Management: Oversee construction and civil works, including junction improvements and the operation/upgrade. Machinery Installation: Lead pre-installation site preparation, including electrical and mechanical utility connections, to ensure seamless integration of line. CDM Coordination: Act as the primary point of contact for Construction Design and Management (CDM) and to prepare all the necessary paperwork for legal compliance, ensuring all site operations, RAMS (Risk Assessments and Method Statements), and permit-to-work systems comply with legal safety standards. Project Planning: Develop detailed project timelines while minimising disruption to active factory production. Stakeholder Liaison: Coordinate between internal production teams, external contractors, and equipment suppliers to align project milestones with factory operational needs. Quality & Hygiene Compliance: Ensure all building projects and installations meet stringent food safety, HACCP, and environmental standards. Required Qualifications & Experience Education: A formal engineering qualification (Degree, HNC/D) in Mechanical, Electrical, or Civil Engineering. CDM Expertise: Proven experience managing projects under CDM 2015 regulations is essential. Safety Certifications: Must hold NEBOSH (Construction or General), SMSTS, and a valid CSCS card

Multi Skilled Bodyshop Technician OTE: £50,000 Multi Skilled Bodyshop Technician Basic Salary:£38,000 - £42,000 Working Hours: 8:30am - 5pm - Mon - Fri Location:Wrexham Talented and efficient Multi skilled Bodyshop Technician to join this leading team. As a Multi Skilled Bodyshop Technician, you will be repairing damaged vehicles in line with the manufacturer's specifications, utilising modern equipment and techniques. Responsibilities of a Multi skilled Bodyshop Technician ·Carry out warranty, transit damage and used car repairs using factory approved products and techniques. ·Ensure repairs meet the high-quality standards Skills and Qualifications of a Multi skilled Bodyshop Technician ·You will have served a recognised apprenticeship and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). ·You must have previous experience working in a similar role within a busy body shop and be a strong team player. With a high skill and experience in panel beating. ·You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. ·The Ideal applicant will be able to produce a high quality of body repairs from start to finish. ·You will be an experienced with a stable history and hold a City Guilds qualification or equivalent. ·ATA qualification is desirable but not essential for this role. ·You will work to a high standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this Multi Skilled Bodyshop Technician role, please contact Chris @ Auto Skills and state reference job number 52982. Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this Multi Skilled Bodyshop Technician role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop industry. Panel Beaters, Paint Sprayers, Smart Repair Technicians and Vehicle Damage Assessors

C# Developer - (Operational Technology) Salary: £35,000 - £40,000 Location: North Wales (with occasional international travel) Job Type: Permanent, Full‑time Are you a Junior C# Developer or Graduate Software Engineer looking to kick‑start your career in automation, Industry 4.0, and smart‑factory technology? This is an opportunity to join a global engineering organisation investing heavily in digital transformation, automation, and advanced OT systems. We're open to graduates and developers with around 1 year of experience, as long as you have solid C# skills. Everything else can be taught - full training will be provided across automation tech, industrial systems, SCADA, robotics, and more. The Role As a Junior OT Applications Engineer, you'll contribute to designing and developing software used across automated production lines and digital manufacturing environments in both UK and international sites. You'll get exposure to cutting-edge technology, including SCADA systems, industrial robotics, Cobots, PLC integrations, MES platforms, and smart‑factory data systems. Key Responsibilities: Develop OT applications using C# and web-based languages. Configure and deploy SCADA, HMI, and MES systems (full training provided). Support automation logic creation for PLCs and industrial controllers (training provided). Assist with commissioning, testing, and validation of automation software. Monitor, troubleshoot, and improve existing OT applications. Help integrate OT systems with IT platforms for analytics and reporting. Maintain documentation for systems and integrations.About You We welcome graduates and junior developers with strong C# skills. You'll need: Experience with C# (academic, personal projects, or commercial). A degree in Computer Science or similar (or equivalent practical experience). Understanding of software development fundamentals and databases. Problem-solving ability, eagerness to learn, and strong communication skills. Ability to work across multiple projects in a fast-paced environment.Nice to have (but not essential): Exposure to automation, OT, or industrial systems - not required, full training provided.What You'll Gain This role offers genuine growth, mentorship, and hands‑on training in the following areas (no prior experience required): Automation systems SCADA / HMI platforms PLC and industrial controller integration Robotics & Cobots Industry 4.0 & smart manufacturing IT/OT convergence and cybersecurity Global engineering project exposureBenefits Competitive salary Enhanced pension Health cashback scheme Discounted gym membership Employee assistance programme Opportunities to travel internationally Continuous training and career progression Supportive engineering and automation environment Involvement in community/volunteering initiatives Monday-Friday working hours (early finish Friday)

C# Programmer Wrexham £35,000 to £40,000 gap construction are recruiting on behalf of a global manufacturing organisation for a skilled C# Programmer to join a forward-thinking automation and technology team. This is an excellent opportunity to work within a highly advanced manufacturing and recycling technology environment, supporting the development of operational systems that drive automated production processes. You will work as part of a collaborative technical team, contributing to the design, delivery and optimisation of bespoke automation software and smart factory solutions. Key Responsibilities This position focuses on the development, integration and ongoing improvement of operational technology applications supporting automated manufacturing and recycling operations. You will be involved across the full project lifecycle from software development through to commissioning support and system optimisation. Design and develop OT applications using C# and web based technologies Configure and integrate SCADA, HMI and MES systems Develop automation scripts and support PLC and industrial control logic Support commissioning and installation of automation systems on production lines Work across multiple automation and technology projects Assist with the implementation of new manufacturing and recycling technology solutions. Integrate operational systems with wider IT and reporting platforms Maintain and improve existing automation and OT systems Provide technical troubleshooting and ongoing system support Maintain clear technical documentationAbout You Degree in Computer Science or a related subject Strong C# development experience Knowledge of databases and system integration principles Ability to manage multiple priorities and meet project deadlines Strong analytical and problem solving skills Good communication skills and a collaborative working approachWhat's on Offer Salary £35,000 to £40,000 Enhanced employer pension contributions Health cashback scheme Reduced gym membership Employee assistance programme Opportunities to travel internationally as part of project delivery Long term career development within a global businessApply Please send your CV to (url removed) and call James at gap construction on (phone number removed). If you have any questions or would like to discuss other opportunities, please contact the same number. This vacancy is being advertised on behalf of gap construction who are operating as an employment agency. gap construction are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy