Hardware engineer jobs in FarehamCreate job alerts

Senior Hardware Systems Engineer\n \n BAE Systems\n \n Location: Broadoak, Portsmouth \n \n Contract Length: 6 Months\n \n Onsite Full time \n \n 37 hours per week\n \n Rate: £45.00 PAYE or £60.69 Umbrella inside IR35 \n \n Overview\n \n This is an excellent opportunity for an experienced hardware engineer to work on complex engineering programmes within a highly technical environment, supporting the design, development, integration an...\n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Senior Hardware Systems Engineer \n Duration: 6-month contract \n Location: Broad Oak \n Full time on-site \n Rate: £60.69 ph Umbrella \n Overview \n An opportunity for a Senior Hardware Systems Engineer to support the design, testing and issue resolution of hardware systems within a naval defence engineering environment. \n Working within a small, dedicated hardware configuration team, you will help prepare Commercial Off-T... \n \n ZIPC1_UKTJ

Job Description Field Engineer \n Area Covering: South of England \n Salary: £31,750 \n As a Field Engineer you will be responsible for assisting in the smooth delivery of Surgery Connect, Surgery Assist, Surgery Insights, and Surgery Intellect powered by Tortus, to the customers' sites (mainly surgeries) around the country. This will include, but is not limited to, installing and setting up hardware. Installing structured cabling, fault finding and assisting surgery staff in setting up PC's, etc. \n Key Tasks: \n ·Installation of new CAT5e cabling and enhancing the existing data cabling infrastructure, including installation of trunking. \n ·Conduct site surveys in surgery environments and provide detailed reports with your findings \n ·Installation and configuration of VoIP phones/Phonebar/switches/routers as well as WIFI systems to existing or new structured cabling within a surgery environment. \n ·On-site customer support, to give demonstrations and ad hoc training at “Go-Lives”. \n ·Troubleshooting a range of issues, investigating, diagnosing faults, and working through to resolution. \n ·To keep up to date with X-on Health's emerging product range and its functionality. Attend regular product courses, where available on the Academy, as set out within the training plan \n ·To ensure customer satisfaction at the highest level. \n ·Undertake SSRAMS and RA complying with the company's Health & Safety and Data Protection, Information Security, PCI & DSP policies and procedures. \n ·Proactively promote products and services, contributing to leads and referrals \n What will you need to be successful? \n ·Ability to complete work to a high standard whilst following Health & Safety regulations. \n ·In-depth knowledge of the installation of new cabling and enhancing existing data cabling infrastructures and VOIP/WIFI systems within a surgery or commercial environment. \n ·Able to work independently and as part of a team. \n ·Strong communication skills and a passion for customer service. \n ·Ability to work under pressure and multitask. \n ·Excellent time management skills. \n ·High attention to detail and problem-solving skills. \n ·Full clean UK driver's license. \n ·A DBS check is required. \n You will enjoy this role is you… \n ·Are happy to travel and work away from home up to 4 nights a week. \n ·Enjoy delivering an excellent customer experience. \n ·Flexible - can do attitude and a proactive approach \n ·Get satisfaction from using problem-solving skills. \n ·Enjoy working directly (face to face) with GP surgeries. \n ·Thrive working within the Health Care industry, improving the experience of millions of people across the country when accessing primary care. \n Benefits: \n \n 25 Days Holiday \n Birthday Day Off \n Buy Holiday Scheme \n Cycle to Work Scheme \n Winter Flu Jabs \n Free On-Site Parking \n Learning and development budget with Professional Qualification Support \n Social benefits (paid social events) \n Employee Assistance Program \n Discount on Health Insurance \n Annual Salary Review \n Enhanced Company Sick Pay \n Monthly pizza in the office (Hybrid employees) / coffee voucher (Remote employees) \n SCG Mobile Benefit \n Employee Referral Bonus \n Pension Scheme \n \n SCG is proud to be an equal opportunities employer. \n We welcome applications from all parts of the community and are committed to upholding the principles of the Equality Act 2010. We are committed to supporting applicants with disabilities. We will endeavour to make necessary adjustments to ensure a fair and accessible recruitment process. \n \n JBRP1_UKTJ

Job Description Join a global leader in semiconductor technology and help develop the next generation of touch and human-machine interface solutions used in millions of products worldwide. \n We're looking for a Senior Design Engineer to join a highly skilled R&D team responsible for the development of advanced sensing and interface technologies used across ndustrial and consumer electronics applications. \n This is a genuinely hands-on engineering role where you'll influence architecture decisions, solve complex technical challenges and work through the full product lifecycle from concept and design through to silicon validation and production. \n \nWhat you'll be doing\n \n \n Designing and developing advanced mixed-signal and embedded solutions \n Defining digital architectures and contributing to RTL development using Verilog/SystemVerilog \n Developing embedded software in C/C++ for sensing, control and signal processing applications \n Supporting silicon bring-up, debugging and validation activities \n Working across hardware, firmware and system-level engineering challenges \n Collaborating with global engineering teams to develop innovative semiconductor products \n Contributing to technology and product roadmaps \n \n \nWhat we're looking for\n \n \n Experience developing digital or mixed-signal integrated circuits \n Strong Verilog and/or SystemVerilog skills \n Embedded software development experience using C/C++ \n Good understanding of microcontrollers and embedded systems \n Experience with Python, MATLAB or similar engineering tools \n Strong analytical and problem-solving skills \n \n \nWhy join?\n \n \n Work on technology deployed in millions of devices globally \n Influence technical direction and product architecture \n Broad exposure across silicon, embedded software and system design \n Collaborative R&D environment with high levels of technical ownership \n Hybrid working and excellent long-term career development opportunities \n Opportunity to work on cutting-edge semiconductor technology with global impact \n \n \n JBRP1_UKTJ

Job Description Field Engineer \n Area Covering: South of England \n Salary: £31,750 \n As a Field Engineer you will be responsible for assisting in the smooth delivery of Surgery Connect, Surgery Assist, Surgery Insights, and Surgery Intellect powered by Tortus, to the customers' sites (mainly surgeries) around the country. This will include, but is not limited to, installing and setting up hardware. Installing structured cabling, fault finding and assisting surgery staff in setting up PC's, etc. \n Key Tasks: \n ·Installation of new CAT5e cabling and enhancing the existing data cabling infrastructure, including installation of trunking. \n ·Conduct site surveys in surgery environments and provide detailed reports with your findings \n ·Installation and configuration of VoIP phones/Phonebar/switches/routers as well as WIFI systems to existing or new structured cabling within a surgery environment. \n ·On-site customer support, to give demonstrations and ad hoc training at “Go-Lives”. \n ·Troubleshooting a range of issues, investigating, diagnosing faults, and working through to resolution. \n ·To keep up to date with X-on Health's emerging product range and its functionality. Attend regular product courses, where available on the Academy, as set out within the training plan \n ·To ensure customer satisfaction at the highest level. \n ·Undertake SSRAMS and RA complying with the company's Health & Safety and Data Protection, Information Security, PCI & DSP policies and procedures. \n ·Proactively promote products and services, contributing to leads and referrals \n What will you need to be successful? \n ·Ability to complete work to a high standard whilst following Health & Safety regulations. \n ·In-depth knowledge of the installation of new cabling and enhancing existing data cabling infrastructures and VOIP/WIFI systems within a surgery or commercial environment. \n ·Able to work independently and as part of a team. \n ·Strong communication skills and a passion for customer service. \n ·Ability to work under pressure and multitask. \n ·Excellent time management skills. \n ·High attention to detail and problem-solving skills. \n ·Full clean UK driver's license. \n ·A DBS check is required. \n You will enjoy this role is you… \n ·Are happy to travel and work away from home up to 4 nights a week. \n ·Enjoy delivering an excellent customer experience. \n ·Flexible - can do attitude and a proactive approach \n ·Get satisfaction from using problem-solving skills. \n ·Enjoy working directly (face to face) with GP surgeries. \n ·Thrive working within the Health Care industry, improving the experience of millions of people across the country when accessing primary care. \n Benefits: \n \n 25 Days Holiday \n Birthday Day Off \n Buy Holiday Scheme \n Cycle to Work Scheme \n Winter Flu Jabs \n Free On-Site Parking \n Learning and development budget with Professional Qualification Support \n Social benefits (paid social events) \n Employee Assistance Program \n Discount on Health Insurance \n Annual Salary Review \n Enhanced Company Sick Pay \n Monthly pizza in the office (Hybrid employees) / coffee voucher (Remote employees) \n SCG Mobile Benefit \n Employee Referral Bonus \n Pension Scheme \n \n SCG is proud to be an equal opportunities employer. \n We welcome applications from all parts of the community and are committed to upholding the principles of the Equality Act 2010. We are committed to supporting applicants with disabilities. We will endeavour to make necessary adjustments to ensure a fair and accessible recruitment process. \n \n JBRP1_UKTJ

Process Control Engineer (Hybrid Working) Location: Portsmouth, Hampshire An ambitious clean‑tech company is on a mission to make innovative energy storage the global standard. Enabling manufacturers, industrial processors, and heavy‑energy users to decarbonise at scale. As part of their growth, they’re looking for a Process Control Engineer to take ownership of the control logic, instrumentation, and system architecture behind a next‑generation thermal energy storage steam generator. This is a pivotal opportunity to shape a first‑of‑its‑kind industrial product as it moves through design, prototype optimisation, and deployment into real customer sites. Become the internal authority on control sequences, fluids system control, and instrumentation — guiding the operability, safety, and performance of a breakthrough energy system. You’ll work across concept design, detailed engineering, prototype testing, and customer‑site integration. • Shape the full control architecture of a new industrial clean‑energy product, • Influence how the system operates, responds, and manages faults across all conditions, • Work closely with fluids, mechanical, and automation specialists to ensure seamless system behaviour, • Play a hands‑on role in prototype optimisation and commissioning on real industrial sites, • Own the complete control logic and operating sequences for the thermal storage steam generator, • Design high‑level control strategies to maximise system operability, safety, and performance, • Specify instrumentation and controls hardware including valves, VFDs, pressure/temperature sensors, flow meters, and safety devices, • Proven experience designing complete control sequences for complex or novel industrial systems, • Strong knowledge of industrial fluids systems (valves, pumps, piping), ideally including steam processes, especially from a controls perspective, • Strong knowledge of fluids instrumentation and control hardware You’ll be part of a mission‑driven, supportive team working toward a cleaner industrial future. Expect an informal, inclusive culture where every voice is valued. Flexible working, share options, and family‑friendly policies are all part of the offering. #J-18808-Ljbffr

Location: Portsmouth with a hybrid working model. Hours: Full time Salary: from £35,000 but negotiable, depending on experience. The role comes with a competitive benefits package including pension (7% company contribution), 25 days holiday and life insurance. Sirius Digital is a trusted provider of expertise in Software Engineering, Data Science, and AI, supporting clients in the defence, nuclear, space, and energy sectors. We specialise in software modelling and simulation, as well as robotics and autonomous systems, delivering technical consultancy and innovative solutions. We are seeking a Software Engineer who combines strong technical skills with problem-solving ability and effective communication. You will work independently or as part of small teams, helping Sirius Digital grow while advancing your own expertise. We offer a competitive benefits package and clear opportunities for rapid career progression. • Deliver technical consultancy projects to a high standard, • Develop and implement software solutions across areas such as wargaming, simulation, autonomous systems, digital twins, and synthetic environments, • Build and sustain strong client relationships, • Apply mathematical and computational techniques to solve real-world problems, developing innovative approaches as needed The successful candidate must be able to demonstrate the following essential and desirable skills and attributes. • Experience designing and delivering performant software applications, ideally within a technical consultancy environment, • Knowledge of software modelling and simulation techniques, • Ability to analyse requirements and define technical specifications, • Experience in one or more of the following: videogame engine technology (e.g., Unreal Engine, Godot), entity or event-based simulation, robotics, and autonomous systems, • Proficiency in C/C++ or C# and Python, • Willingness to learn new technologies and programming languages, • Ability to apply mathematical or statistical methods to scientific or applied challenges, • Confidence working with large codebases and understanding hardware/performance constraints, • Strong interpersonal skills for client and stakeholder engagement, • Experience preparing technical reports and presenting to customers, • Willingness to travel within the UK and work on client sites as required, • Background working with Defence Digital, DE&S, Dstl, Frontline Commands, or the UK Defence industry, • Degree in a STEM or computing discipline, or equivalent experience, • Proficiency with MS Office (Excel, PowerPoint, Word) We offer a combination of mentoring and internal and external training opportunities, with specialist sector organisations and in-house courses. You will have exposure to subject matter experts and additional online learning packages. The role comes with a competitive benefits package including: • pension (7% company contribution), • electric vehicle scheme, • Candidates must have an existing right to live and work in the UK., • Candidates must be willing to undergo an internal baseline personnel security standard check prior to starting their employment with the company., • Candidates must be willing and eligible to complete a United Kingdom Security Vetting (UKSV) security clearance application to the Security Check (SC) level upon starting their employment with the company. To gain SC Clearance you will normally need at least 5 years’ UK residency., • Clearance check (SC level) or hold a current SC clearance upon starting their employment with the company. To gain SC clearance you will normally need at least 5 years’ UK residency. To apply please send a covering email and CV to . CVs are reviewed upon submission and initial phone for face-to-face interviews are likely to begin within two weeks. Feedback will be given on all interview candidates regardless of success. Send us your CV and a bit about yourself! #J-18808-Ljbffr

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Cytiva, one of Danaher's (our-businesses) 15+ operating companies, our work saves lives-and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. Working at Cytiva means being at the forefront of providing new solutions to transform human health. Our incredible customers undertake life-saving activities ranging from fundamental biological research to developing innovative vaccines, new medicines, and cell and gene therapies. At Cytiva you will be able to continuously improve yourself and us - working on challenges that truly matter with people that care for each other, our customers, and their patients. Take your next step to an altogether life-changing career. Learn about the Danaher Business System (how-we-work/danaher-business-system) which makes everything possible. The Automation Quotation Engineer is responsible for helping customers understand automation and digital solutions while supporting commercial teams throughout the sales process. This role translates customer requirements into standard or custom automation solutions, develops cost, scope, and schedule estimates, and maintains estimating tools and metrics. The position also provides customer feedback to Product Management and supports opportunities involving Cytiva's Intelligent Equipment portfolio. This position reports to the Director of Automation Solutions and is part of the Automation and Digital product management team located in UK or Krakow, Poland and will be an on-site role. • Educate customers on the design space for standard offerings of the Automation & Digital platforms to support customer needs, business goals and future states., • Support the commercial sales team in translating customer needs into the Automation & Digital product offerings and custom projects, • Work as a bridge between customers and engineering teams across time zones, applying the correct Automation & Digital solution to customers' requirements, • Develop estimates for automation solutions independently or in conjunction with hardware teams, Product Management, and other stakeholders, • Bachelor's degree in chemical or electrical engineering, or related field., • Multiple years of experience working in automation/controls engineering., • Experience with automation platforms such as Rockwell, Emerson, Siemens, AVEVA PI or AVEVA System Platform., • Experience with different automation protocols such as Profibus, Profinet, Ethernet/IP, and OPC DA/UA, • Strong communication skills and comfortable working directly with customers, • Ability to travel - 10%, • Electrical design work., • Networking and cybersecurity., • The Life Science industry, especially single-use bioreactors and mixers. Cytiva, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info (ah-angular-afirst-web/#/web/danaher/cp/preauth-home) . Join our winning team today. Together, we'll accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. #J-18808-Ljbffr

Expleois a trusted partner for end-to-end, integrated engineering, quality services and management consulting for digital transformation. We help businesses harness unrelenting technological change to successfully deliver innovations that will help them gain a competitive advantage and improve the everyday lives of people around the globe. As part of our continued support to our customer in the space sector we are looking for a Systems Engineer. The role will be based at our customer’s facilities in Portsmouth that will include work outside of normal hours. This is an exciting opportunity for an ambitious individual to develop and grow their skills and knowledge within a thriving organisation. The successful candidate will be responsible for developing and executing automated test procedures for satellite payload systems, validating CCSDS-based communications, and performing integration testing on satellite simulators and hardware test benches. The role includes test specification development, configuration management, anomaly investigation, traceability reporting, and the creation of automation tools to support efficient verification and validation activities. Working in collaboration with the client, across various Satellite based programmes and technologies, for the delivery of the Space Onboard Functional Validation programme. This is an area of significant growth within Expleo, an area where we are looking at growing our team demonstrating our commitment to continue to grow our space business. Engineers with energy and drive with broad expertise are ideal, however of particular interest would be candidates with space, aerospace, payload, high tech manufacturing or telecommunications experience. This role represents a great opportunity to work on cutting edge satellite programmes. Valued attributes are a team player who can use their initiative and has a real passion for engineering with an attention to detail, combined with a thorough, methodical approach to problem solving. • System Engineering activities., • Functional Validation execution., • Work with the FV Architect and FV Tech Lead to break down tests into manageable parts and communicate regularly to ensure efficient implementation., • Create the Automated Procedure (AP)’s (java test script) for the execution of tests on a Satellite simulators (SatSims) and hardware test benches with hardware in the loop., • Preparation of configuration files and link script execution to these last ones., • Preparation of step-by-step procedures to run java scripts., • Execution of procedures on the Engineering hardware model test bench., • Creation of short and clear test execution reports to share with different teams., • Anomaly management: Report all observations to the tech lead and architect using the process in place (Jira)., • Investigate any observations raised during the testing on Satsims and hardware., • Report any differences in testing between the Satsims and Hardware to ensure that the Satsims are representative in future., • Upload test sessions to internal ADS tool and ensure test traceability., • Preparation of offline processing tools to automatise manual operations (in different languages java, python etc)., • Maintaining the OneSat Payload FV Schedule., • Validation, Verification and Qualification., • System Test Requirement Management., • Demonstrable industry related experience / Degree qualified – Engineering or Science related subject, • Systems Engineering., • Test Engineering., • Requirements analysis., • Knowledge of CCSDS standards of ground to space communications layers (TC/TM PUS packet, TM frames, TC segment, CLTUs, CLCW etc)., • Hardware SW integration., • Configuration & SDLC (git, Jira, DOORS), • Good knowledge of Linux OS and GIT/SVN., • Telecommunications., • Software and Hardware Validation., • Java., • Python., • Safety Critical Software testing., • Excellent problem-solving skills and attention to detail., • Ability to provide inputs to project Management., • MS Office Suite., • Problem Solving & Decision Making: Analytical mindset with the ability to make sound decisions in complex environments., • Confident in performing base operations with equipment like DC power supplies, RF signal generators and spectrum analysers., • Extensive and proven experience in Systems Engineering roles, preferably within the space or aerospace industry, • Strong analytical and problem-solving skills, with the ability to troubleshoot complex technical issues and propose innovative solutions, • Excellent communication and interpersonal skills, with the ability to collaborate effectively in a multidisciplinary team environment, • Experience with project management practices and tools, including schedule management, risk analysis, and resource allocation, • Knowledge of relevant industry standards and regulations, such as CCSDS Standards is essential, • Ability and willingness to work outside of normal hours twice a week between 06:00 – 14:00 or 14:00 - 22:00., • Ability and willingness to travel to and work on the client’s Portsmouth site 5 days per week., • Collaborative working environment – we stand shoulder to shoulder with our clients and ourpeers through good times and challenges, • We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects, • ExpleoAcademy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses, • Competitive company benefits, • Always working as one team, our people are not afraid to think big and challenge the status quo, • As a Disability Confident Committed Employer we have committed to:, • Ensure our recruitment process is inclusive and accessible, • Communicating and promoting vacancies, • Offering an interview to disabled people who meet the minimum criteria for the job, • Anticipating and providing reasonable adjustments as required, • Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age. We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive #J-18808-Ljbffr

Bilfinger is a leading international industrial services provider, driving efficiency and sustainability for the process industry. With about 31,000 employees and over €5.4 billion in revenue in 2025, we offer solutions in consulting, engineering, manufacturing, maintenance, turnarounds, and digital applications across key sectors like energy, chemicals, pharma, and oil & gas. Shape the future with Bilfinger UK: With a strong commitment to sustainability, Bilfinger UK stands out as a premier provider of engineering and maintenance services. For over 50 years, Bilfinger UK has consistently pushed the boundaries of innovation, delivering advanced solutions that support industries, infrastructure, and communities across the United Kingdom. As a key member of the globally respected Bilfinger Group, Bilfinger UK has built a reputation as a versatile leader, offering both onshore and offshore services. From energy and utilities to pharmaceuticals and petrochemicals, the company’s broad expertise across various sectors makes it a trusted partner in the industry, as well as a work environment where you can develop your potential. At Bilfinger, we offer a work environment where you can learn and grow. Join us and be part of a team shaping the future! Our Automation teams deliver projects in various industries including Nuclear, Oil & Gas, Food & Beverage, Chemicals & Pharmaceuticals, Energy/Renewables, Data Centres and Utilities. Our teams across Chesterfield, Fareham and Warrington deliver solutions using a wide array of technology including Rockwell, Siemens, Schneider, AVEVA, Ignition and many more. These solutions include PLC, HMI, SCADA, MES, Batch, Functional Safety, OT Cyber Security and Industry 4.0. As part of our continued growth in Automation, we are looking for a Senior Systems Engineer to join our team in Fareham. • Be a committed and enthusiastic member of the team, taking full responsibility for successful technical delivery of a complete project solution to the agreed scope in accordance with company procedures whilst meeting budgetary and time-scale targets., • Be pro-active, and able to allocate tasks among team members and supervise, assist and monitor task progress and advise the project manager on progress, risks and issues., • Work co-operatively with the Project Manager and engineering team to ensure smooth project progress in accordance with the agreed project lifecycle., • Responsible for the technical delivery of projects, • Work closely with and support the Project Manager in all aspects of project technical delivery and scope management, • Allocate tasks to the engineering team and monitor progress, • Responsible for meeting the technical and quality requirements of projects, • Ensure project adherence to company quality processes and procedures, • Identify project opportunities and variations, • Support the Project Manager in identifying and managing risks and issues, • Identify and enable use of reusable modules by standardisation and modularisation of systems where appropriate, • Prototyping of new technologies, • Training planning and support, • Mentoring of Engineers, • Support the Automation sales and proposals teams, • Provide Health and Safety leadership by example, • Involvement in sales to projects hand-over process, • Assist the Project Manager in the development of the project Quality plan, • Assist the Project Manager in the development and ongoing updates of task & procurement lists, • Peer review documents created by the project team or other teams, • Undertake site surveys as required, • Undertake outline design, upfront design studies and requirement definition for clients, • Develop FDS, • Develop DDS, • Develop test specification & design testing methodology, • Develop project modules. (Modules as identified in the design – PLC code modules, SCADA scripts, Mimics, communication drivers, etc.), • Develop site work documentation with team input as necessary (Risk assessment, method statement, site test documentation), • Develop O & M documentation, • Undertake full integrated system testing, CFAT, SAT and installation, • Undertake observations, variation and reworks, • Undertake site installation & commissioning The following experience is essential: • Detailed experience of the full project life cycle from system specification through design, development, testing and on-site commissioning is essential, • Development & delivery of detailed design documentation, • Hands on delivery experience of PLC and SCADA systems, • A good appreciation of Control panels, electrical installation and Instrumentation solutions., • A Degree or HND/HNC in Electrical / Electronic Engineering, Control Systems or relevant discipline, • Chartered Engineer or working towards professional registration Experience of some or all of the following is desirable: • PLC and SCADA experience with Rockwell, Siemens, Schneider, AVEVA or Ignition, • MQTT & IOT Systems, • Historians, • Database Implementation and Management, • Ethernet Network design and configuration, • IT hardware & Software, • Virtualised platforms such as VMware & ESXi, • OT Cyber Security, • Functional Safety, • Industrial Protocol Knowledge (OPC, IEC 61850, Profinet, Modbus, etc) For additional information please contact Leo Andrew Carvel Taylor by email . Bilfinger is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability or other characteristics protected by law. #J-18808-Ljbffr

ALTEN is a global engineering and technology consultancy operating across over 35 countries worldwide. We partner with industry leaders across sectors including Aeronautics, Aerospace, Defence, Naval, Automotive, Energy, Rail, IT and many more to deliver innovative engineering solutions that drive technological advancement & support sustainable transformation. Our teams of passionate and agile engineers work on cutting‑edge projects that shape the future of technology and sustainability. At ALTEN, we empower talented engineers to innovate, solve complex challenges, and deliver impactful solutions that build tomorrow’s world—today. Join us and start building tomorrow’s world today! We’re looking for an experienced Software Engineer to join our team in Fareham a distributed engineering team working on high‑performance, real‑time systems. This role is ideal for someone who enjoys building robust backend software, working close to hardware and sensors, and creating intuitive user interfaces for complex systems. You’ll be involved across the full software lifecycle, contributing to both core system logic and user‑facing applications, with a strong focus on performance, reliability, and quality. • Location: Fareham, • On Site: Regular Access to the site, • Clearance: Candidates should be willing and eligible to obtain at least BPSS clearance., • Experience Level: 5+ years of relevant experience., • Design, develop, and maintain backend software components using modern C++, • Build and implement algorithms that combine and process data from multiple sensors, • Develop and optimise real‑time image and data processing pipelines, • Create and integrate user interfaces using Qt and QML, connected to C++ backends, • Ensure high software quality through code reviews, testing, debugging, and performance tuning, • Collaborate closely with systems, embedded, and UI/UX engineers, • Contribute across the full development lifecycle: requirements, architecture, implementation, and documentation, • Strong commercial experience with C++, • Hands‑on experience with Qt / QML, • Background in real‑time, embedded, or performance‑critical systems, • Ability to work on complex systems that integrate software, hardware, and data, • Comfortable working remotely as part of a collaborative engineering team, • Experiance within Defence or Maritime industries, • A Bachelor’s or Master’s degree in Engineering, or equivalent military experience., • Experience working with sensor data such as cameras, radar, LiDAR, or similar inputs, • Background in image processing, computer vision, or perception systems, • Exposure to embedded Linux or low‑level system integration, • Understanding of performance optimisation and multi‑threaded applications, • Experience working in regulated, safety‑critical, or high‑reliability environments We bring together entrepreneurial, tech-driven people to deliver innovative solutions for leading companies. At ALTEN, you’ll work on exciting projects, supported by ongoing learning, mentoring, and clear career development tailored to your goals. Join a passionate team and help build tomorrow, today. • A personalised career path and a rewarding management style, • A huge diversity of engineering projects and industries, • Private Medical Insurance, • Cycle & Tech Scheme, • Employee assistance programme, • Life insurance & Pension Scheme, • Social atmosphere, regular gatherings & team buildings, • Flexible way of working (role dependent) We are proud to support the Armed Forces Covenant & actively encourage applications from members of the Armed Forces community, including veterans, reservists, service leavers, and military spouses/partners. We recognise the value of military skills and experience and are committed to ensuring that no applicant is unfairly disadvantaged during our recruitment and selection processes. ALTEN is committed to fostering a diverse and inclusive workplace and values the strength that comes from a global mix of backgrounds and perspectives. We welcome applications from all suitably qualified candidates, regardless of background or protected characteristics under the Equality Act 2010. If you require any reasonable adjustments during the recruitment process, please let us know. This role may require you to have or be willing to go through Security Clearance. As part of the onboarding process candidates will be asked to complete a Baseline Personnel Security Standard; details of the evidence required to apply may be found on the government website Gov.UK. If you are unable to meet this and any associated criteria, then your employment may be delayed, or rejected . Details of this will be discussed with you at interview. #J-18808-Ljbffr

Temporary Ongoing Role Acorn by Synergie is currently recruiting for an experienced Engineer to join a leading global organisation within the laboratory science and filtration technology sector. This is an exciting opportunity for a skilled engineering professional to play a key role in delivering critical performance testing and technical data for filtration systems and hardware products. Working within a modern laboratory environment, you will collaborate closely with engineering, project and cross-functional teams to ensure testing programmes are delivered to the highest standards, on time and within budget. The successful candidate will be a proactive problem-solver who enjoys working independently while contributing to wider project objectives and continuous improvement initiatives. • Review project requests, laboratory methods, SOPs and relevant safety documentation., • Interpret customer and project requirements to develop suitable test plans., • Ensure appropriate equipment, materials and resources are available., • Coordinate testing schedules and identify any resource conflicts., • Prepare and maintain accurate test documentation and datasheets.Testing & Analysis, • Assemble and configure laboratory test apparatus., • Operate, monitor and troubleshoot laboratory equipment and instrumentation., • Conduct engineering and performance tests in accordance with established procedures., • Accurately record raw data and observations., • Communicate any delays, deviations or technical issues to laboratory management., • Analyse results and support project teams with technical findings.Reporting & Documentation, • Produce accurate laboratory reports within agreed timelines., • Record project hours and maintain comprehensive testing records., • Ensure all data is documented in accordance with internal quality standards.Laboratory Support, • Support laboratory systems including purchasing, calibration and inventory management., • Carry out preventative maintenance activities., • Assist with laboratory housekeeping and improvements., • Deliver peer training where required and maintain training records., • Participate in customer audits and support continuous improvement initiatives., • Contribute ideas that enhance laboratory efficiency and performance. To be successful in this role, you will possess: • Bachelor's degree in mechanical engineering, Engineering Science or a related discipline, or equivalent industry experience., • Minimum of 3 years' experience in an engineering or laboratory testing environment., • Understanding of filtration, separation and purification technologies., • Experience conducting technical testing and analysing engineering data., • Full UK Driving Licence and valid passport., • Willingness to travel domestically and internationally when required., • Strong time management and organisational skills., • Practical hands-on engineering and testing capability., • Excellent problem-solving and analytical skills., • Ability to interpret technical requirements and follow work instructions., • Strong report writing and technical documentation skills., • Good verbal and written communication abilities., • Competent in Microsoft Office and PC-based applications., • Ability to manage multiple priorities and meet deadlines., • Comfortable working both independently and as part of cross-functional teams., • Ability to build productive relationships with customers and internal stakeholders. #J-18808-Ljbffr

HE Space in Portsmouth, United Kingdom, is seeking a Functional Validation Engineer - Payload Software (PLSW) to translate requirements into automated tests and validate software across simulation and hardware environments. You will work with FV architects and software teams, using SATSIM and RF benches, and contribute to non-regression campaigns, defect tracking in Jira, and cross-site collaboration with Toulouse and Portsmouth. #J-18808-Ljbffr

Location: Fareham, Hampshire – Primarily On-site Clearance: Must be eligible for UK Security Clearance (SC) An exciting opportunity has arisen for an RF Design Engineer in Fareham to join a specialist engineering company developing advanced RF and radio communication systems used in defence, government, and secure communications environments. This role would suit an engineer with strong experience in RF transmitter and receiver design, particularly within UHF or low GHz frequency bands, who enjoys working across the full product development lifecycle from concept through to production. As an RF Design Engineer, you will be responsible for the design and development of RF hardware used within specialist radio systems. • Designing RF transmitters and receivers, primarily in UHF bands, • Developing low-power RF circuits and power amplifiers, • Testing and validating RF designs using RF test equipment, • Supporting designs through prototype, verification, and production, • Producing technical documentation including test procedures and assembly drawings, • Working closely with multidisciplinary engineering teams, • Ensuring designs meet CE / UKCA and relevant regulatory standards, • Degree in Electronic Engineering or similar, • Experience designing RF transmitters and receivers, • Strong understanding of RF circuits, antennas, and radio systems, • Experience using RF test equipment such as spectrum analysers and vector network analysers, • Understanding of the product development lifecycle, • Experience with Software Defined Radio (SDR), • Knowledge of analogue or digital electronics design, • Experience with Matlab, Python, VHDL, or C This position is primarily on-site due to the hands‑on nature of RF hardware design and testing, working closely with engineering teams and lab equipment. If you’re an RF Design Engineer looking to work on advanced RF technologies within a specialist engineering environment, this is an excellent opportunity to join a growing technical team. Interested in finding out more or ready to apply Contact: Shammi Choudhury – | #J-18808-Ljbffr

Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Cytiva, one of Danaher's 15+ operating companies, our work saves lives—and we're all united by a shared commitment to innovate for tangible impact. You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. Working at Cytiva means being at the forefront of providing new solutions to transform human health. Our incredible customers undertake life-saving activities ranging from fundamental biological research to developing innovative vaccines, new medicines, and cell and gene therapies. At Cytiva you will be able to continuously improve yourself and us - working on challenges that truly matter with people that care for each other, our customers, and their patients. Take your next step to an altogether life-changing career. Learn about the Danaher Business System which makes everything possible. The Senior Engineer is responsible for new product development or improvement projects and designs for hardware and / or disposable devices for the biotech industry and market. You will work from early phase (definition of specs) of the initiative through design, testing and validation with the Product Manager and the R&D Engineers and finally transfer into manufacturing in alignment with Manufacturing Engineers and Supply Chain. This position reports to the and is part of located in and will be an on-site role. • Develop and manage project plans, including defining roles and responsibilities, and overseeing resource allocation and risk management, • Provide technical leadership, confidently guiding teams through complex projects and engineering challenges, • Apply a strong working knowledge of 3D CAD design to support and drive innovative product development activities, • Ensure clear, consistent communication, including reporting project progress and key updates to leadership teams, • Drive effective problem-solving while fostering strong team collaboration and cross-functional communication, • BSc or BEng in Mechanical Engineering or equivalent, or a HND/HNC/apprenticeship, • combined with significant direct work experience, • Considerable work experience in an R&D environment, • Experienced in leading through project management and/or design roles, • Good understanding of 3D CAD design, • Able to manage own daily workload and accomplishing tasks with minimal supervision if applicable for role • Ability to travel - up to 20% travel, overnight, across the world, • Must have a valid driver’s license with an acceptable driving record, • An R&D environment, • Engineering or technical leadership Cytiva, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info. Join our winning team today. Together, we’ll accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit www.danaher.com. #J-18808-Ljbffr

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Raymarine is a world leader in marine electronics with innovation at the heart of everything we do. We combine mechanical engineering, hardware and software to create products trusted by recreational boaters, commercial operators, and maritime professionals around the world. As a Design Engineer you will develop robust, manufacturable products from concept through to production including design, prototyping and testing. Working within a cross-functional team you will deliver high-quality solutions that meet performance, environmental and regulatory requirements. Your work will directly influence product performance, reliability, manufacturability, and cost. Creating greater value for customers and the business. This role is ideal for someone who enjoys hands-on product development, solving technical challenges and bringing innovative products to life. • Develop mechanical components and sub-systems throughout the full product development life cycle., • Identify and evaluate technologies and design solutions that meet functional and performance requirements., • Create robust mechanical designs, three-dimensional models and two-dimensional manufacturing drawings using SolidWorks., • Apply engineering principles, simulation, failure analysis, design for manufacture and geometric dimensioning to improve product quality., • Build prototypes and prepare and carry out verification and validation tests including hands-on testing and analysis of your designs., • Plan and manage your design activities to meet agreed project timescales and budget constraints., • Work closely with colleagues across project management, hardware, software, supply chain and compliance as well as external suppliers., • Travel to suppliers or customers when required, including locations in Asia and the Americas., • Carry out the role in accordance with all relevant legislation and following Raymarine's policies and processes, including those relating to ethics, compliance, cyber security, product development, labour and human rights, and the environment., • Undertake all mandatory training as requested., • A degree or equivalent qualification in product design, mechanical design engineering or a related subject., • Proven experience in a mechanical design role, ideally within a high-volume manufacturing environment., • Proficiency in SolidWorks for three-dimensional modelling and manufacturing drawing creation., • A good understanding of manufacturing processes such as casting, injection moulding and machining., • Practical experience of developing products from concept through prototyping, testing and production., • A sound understanding of design for quality and design for manufacture principles., • Excellent communication, collaboration and problem-solving skills, with strong attention to detail., • Fluency in written and spoken English, and willingness to work onsite with the team at least four days per week., • Opportunity to develop your career with one of the world's leading marine electronics companies., • At Raymarine you get a unique opportunity to experience how cutting-edge research and development, software and hardware development come together under one roof., • Friendly culture with a focus on collaboration, problem-solving, and creativity., • A fair compensation structure and benefits. Export control requirement This position requires access to export-controlled information or items, including regulated technology or technical data under United States export regulations. Applicants must be eligible to apply for and obtain the appropriate export control licence from the relevant United States government department. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. . #J-18808-Ljbffr

Package: £52,425 - £58,250 (salary dependent on experience) + Benefits Role ID: SF19903 Are you ready to be part of the future? At QinetiQ, we’re not just imagining tomorrow we are creating it. From cutting‑edge defence technology to ground‑breaking innovations our mission is to empower and protect lives. Join us as a Senior Mechanical Design Engineer at our Gosport site, where you will have the opportunity to work with cutting‑edge technology in partnership with some of the most brilliant minds. As a Senior Mechanical Design Engineer you will be leading the delivery of mechanical design solutions and taking ownership of delivery on complex tasks, requiring high integrity engineering and managing complex, unusual tasks involving significant challenges. Day‑to‑day, you’ll will explore and test the problem space thoroughly, guiding others in generating their own hardware solutions and be prepared to lead and co‑ordinate the reviews and testing of these ideas at design reviews and group critiques to delight customers. Ideally, you will have gained significant and wide‑ranging experience in geometric dimensioning and tolerancing, CAD modelling using NX, configuration control using Teamcenter, and composites manufacture and/or design for composites manufacture. • Reviews: This role involves guiding others and coordinating subject‑matter experts through design reviews, including running pre‑reviews and chairing internal or lower‑level customer reviews, with the potential to progress to full Design Review Chair competency, • Delivery: This role plays a key part in live continuous improvement during delivery, leading and coordinating technical teams to produce optimised designs and clear, detailed reports, • Technical: This role involves providing confident advice and presentations to customers, stakeholders and peers, while driving high technical and professional standards through inventive problem solving and recognised best practice, • Governance: This role requires a solid understanding of safety engineering tools and how they are applied across the project lifecycle, including compiling HAZID outputs and contributing to Design Safety Cases, • We would expect the individual to display both knowledge and practical experience, can function without supervision on a day‑to‑day basis and be capable of providing guidance and advice to less experienced practitioners in the following competency areas. Including but not limited to:, • Hazard Identification, Safety Cases & Safety Management systems, • Applying Analytical, Simulation and Modelling Techniques, • Materials Selection, Coatings & Corrosion, • Concept Design & Development, • Significant experience creating technical drawings from 3D Models in Siemens NX (or similar CAD tools), working with suppliers, manufacturers, customers, and subject matter experts, • HNC/HND/Degree in Aeronautical or Mechanical Engineering, Industrial Design or Product Design (or equivalent experience), • Industrial Design, Mechanical Engineering, Product Design degree or equivalent (desirable), • Should have achieved CEng level against the UK SPEC and have joined a recognised professional institution and maintaining CPD (desirable) We value difference and we don’t have a fixed idea when it comes to background or education, provided you can show the required level of experience and willingness to learn then we would like to hear from you. This role is 37 hours per week based at our Gosport site with an average site attendance of five days per week. Role primarily requires working on‑site with limited opportunity for remote work. Adaptive working offered which includes flexible start and finish times and compressed hours options. UKSV National Security Vetting Solution: guidance for applicants - GOV.UK (www.gov.uk) At QinetiQ we are committed to building an inclusive, accessible and welcoming workplace where everyone feels valued and supported. We believe that a diverse mix of backgrounds, perspectives and experiences drives innovation and leads to better outcomes for our people, customers and communities. We encourage applications from all candidates and are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the recruitment process, please let us know by emailing . One of our recruitment team will contact you. Many roles in QinetiQ are subject to national security vetting being completed, applicants who already hold the appropriate level of vetting may be able to transfer it upon appointment. A number of roles are also subject to additional restrictions, which means factors such as nationality or previous nationalities may affect the roles that you can be employed in. As we continue to grow into new markets around the world, there’s never been a more exciting time to join QinetiQ. The formula for success is our appetite for innovation and having the courage to take on a wide variety of complex challenges. As a QinetiQ employee, you’ll experience a unique working environment where teams from different backgrounds, disciplines and experiences enjoy collaborating widely and openly as we undertake this exciting and rewarding journey. Through effective teamwork, and pulling together, you’ll get to experience what happens when we all share different perspectives, blend disciplines, and link technologies; constantly discovering new ways of solving complex problems in a diverse and inclusive environment where you can be authentic, feel valued and realise your full potential. Visit our website to read more about our diverse and inclusive workplace culture. www.qinetiq.com/en/careers/life-at-qinetiq • Matched contribution pension scheme, with life assurance, • Generous holiday allowance, with the option to purchase additional days, • Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance, • Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more, • We are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition Scheme, • Volunteering Opportunities - helping charities and local community #UKD #J-18808-Ljbffr

You will work with Mechanical/Hardware engineers in the operations test team and with R&D on NVI/NPI software projects, delivering robust software solutions for hardware control. Gerrell & Hard is seeking a Software Engineer to provide software support for production lines in Southampton and to assi

ALTEN in Portsmouth is seeking an experienced Vibration Test Engineer to join our engineering team. You will perform hands-on vibration and shock testing on space and commercial hardware in an environmental test lab, manage test setup, data capture, and reporting, and support customers with accurate test results. You will own test activities from preparation through delivery, work with internal teams and external customers, and help maintain test facilities. #J-18808-Ljbffr

Location: Portsmouth with a hybrid working model Hours: Full time Salary: From £50,000 but negotiable, depending on experience. The role comes with a competitive benefits package including pension (7% company contribution), additional holiday purchase options and life assurance. We offer a combination of mentoring and internal and external training opportunities, with specialist sector organisations and inhouse courses. You will have exposure to subject matter experts and additional online learning packages. The Role: Sirius Digital are a rapidly growing software and data science consultancy firm, renowned for our reputation and our keen ability to understand and meet customer requirements effectively. Our team is dedicated to delivering high-quality, end-to-end software and data science services. This role offers the opportunity to work with these teams to operate across multiple sectors, including defence, energy, transport and health, and contribute to the development of cutting-edge solutions. We are looking for senior software engineers with a range of levels of experience including designing and delivering software applications. As a Software Engineer, you will play a major role in developing code in the Software Modelling and Simulation, autonomy and geospatial fields, along with providing key advice around innovation and new techniques to stakeholders. You will be designing solutions for complex challenges that will meet and exceed user requirements. Responsibilities will include: • Designing, developing and delivering software solutions using a large range of techniques, including Wargames, Modelling and Simulation, Robotic and Autonomous systems, Digital Twins and Synthetic Environments., • Applying mathematical and computational methods to tackle real world problems, applying tools and techniques, and developing novel approaches where required., • Delivering technical consulting projects and products, with the opportunity to lead some of these, • Building new relationships and maintaining current customer relationships. About You: We are looking for candidates who can help the company grow and can offer exciting opportunities for those with the drive to develop their own skills and those of the company. We offer competitive salaries and packages, and the opportunity for rapid advancement for the right candidates. • At least 5 years’ experiencein designing and implementing performant software applications., • Apply mathematical principles or statistical approaches to solve problems in scientific or applied fields., • Proficient in C/C++ or C# and Python., • Ability to understand and describe a range of software modelling and simulation techniques., • Ability to analyse use cases and project data context to determine specifications and requirements., • Experience in one or more of the following technical disciplines:, • Videogame engine technology (e.g. Unreal Engine, Godot), • Entity or Event based Simulation, • Robotics and Autonomous Systems, • Understand varied codebases and be confident in making changes to large projects., • Understand performance and hardware constraints., • Building customer and stakeholder relationships., • Supporting and leading authoring of technical reports and presenting to customers., • Be willing to travel across UK and comfortable to work at client sites for periods., • Experience working with Defence Digital, DE&S, Dstl, Frontline Commands or UK Defence industry., • The ideal candidate will be educated to degree level or have equivalent relevant experience., • We’d love you to bring a strong STEM / computing background., • Proficient in MS Office, especially Excel, PowerPoint, Word. What we offer: We offer a combination of mentoring and internal and external training opportunities, with specialist sector organisations and inhouse courses. You will have exposure to subject matter experts and additional online learning packages. The role comes with a competitive benefits package including: • electric vehicle scheme, • pension (7% company contribution), • additional holiday purchase options, • private health care and life assurance Other Requirements: • Candidates must have an existing right to live and work in the UK., • Candidates must be willing to undergo an internal baseline personnel security standard check prior to starting their employment with the company., • Candidates must be willing and eligible to complete a United Kingdom Security Vetting (UKSV) security clearance application to the Security Check (SC) level upon starting their employment with the company. To gain SC Clearance you will normally need at least 5 years’ UK residency. The ideal candidate will have experience in managing a project from start to finish. This candidate will be able to create a plan of action which will consider a fixed timeline and evaluate risks. This individual should also have experience managing people and be an effective communicator. To Apply To apply please send a covering email and CV to . CVs are reviewed upon submission and initial phone for face-to-face interviews are likely to begin within two weeks. Feedback will be given on all interview candidates regardless of success. Send us your CV and a bit about yourself! #J-18808-Ljbffr

Title: FPGA Design Engineer Date: 12 Oct 2026 Location: United Kingdom, Whiteley, Hampshire, GB DTC | A Codan Company develops advanced wireless communication technology used in some of the world’s most demanding environments. From software defined radios and high performance wireless networks to communications for defence, uncrewed systems, government and broadcast applications, our engineers work on complex products where FPGA, software, electronics and RF comes together. We’re looking for an FPGA Engineer to join our engineering team in Whiteley. If you have strong FPGA design experience and are confident working in VHDL, we’d like to hear from you. We’re flexible about the industries, devices and tools you’ve worked with. You’ll develop FPGA solutions for our embedded communications products, working closely with engineers across software, electronics, RF and systems. • Designing and implementing FPGA functionality in VHDL, • Verifying designs through simulation and testing on real hardware, • Integrating FPGA designs with processors, embedded software and other hardware, • Investigating design and system level issues during development and testing, • Contributing to technical decisions from early design through to product release, • Improving and supporting FPGA designs in existing products You’ll be able to see your designs running on physical products and understand how they contribute to the performance of the complete communication system. The two things we’re particularly interested in are hands-on FPGA design experience and strong VHDL skills. Beyond that, we’re open minded. You might have worked in communications, defence or another field entirely. You don’t need experience with our specific devices, products or applications to be considered. Experience in any of these areas would be helpful, but none is a requirement: • AMD/Xilinx devices or Vivado, • Verilog, • Digital signal processing, RF or software defined radio, • High speed data paths or real-time systems, • Embedded C/C++, Python or embedded Linux, • MATLAB or similar modelling tools, • Automated testing, CI/CD or source control, • Board level hardware, schematics or laboratory test equipment, • IP networking or secure development practices If your strength is FPGA design in VHDL and you’re interested in applying it to wireless communications, we’d welcome your application even if much of this list is new to you. Interesting engineering You’ll work on sophisticated wireless products alongside specialists in embedded software, electronics, RF and signal processing. Real products, real impact Your designs will run in communication systems used across defence, government, uncrewed platforms and broadcast applications around the world. Room to develop You’ll have opportunities to deepen your FPGA expertise and build knowledge in new areas of communications technology. • 25 days’ annual leave plus bank holidays, • Company pension with matching up to 9%, • Company bonus scheme, • Flexible core working hours, • Annual pay reviews, • Personal training and development, • Income protection, • Life assurance, • Employee Assistance Programme, • Modern working environment in Whiteley, • Onsite subsidised café You’ll also be joining a global organisation with engineering and technology teams across the UK, USA, Denmark, Singapore, Dubai and Australia. Successful applicants will need to be willing and eligible to obtain UK Security Clearance. #J-18808-Ljbffr

Lead Forensics is a leading SaaS provider specializing in B2B sales and marketing solutions. We enable our clients to discover new business opportunities and drive growth with innovative technology. We are looking for an accomplished Infrastructure Engineer to maintain, enhance, and automate our hybrid infrastructure supporting internal operations. This is a hands‑on role requiring a wide range of expertise across cloud platforms, networking, operating systems, and security, with a strong emphasis on continuous improvement and automation. Fully remote, with the requirement to be within reasonable travel distance to Portsmouth for occasional visits to our physical infrastructure and data centres. Oversee and manage hybrid infrastructure across both cloud and on-premises environments. Act as the technical escalation point for the IT Support team, resolving complex infrastructure issues. Monitor, maintain, and improve the availability, performance, and security of infrastructure services. Ensure comprehensive and up‑to‑date technical documentation and operational procedures. Minimum 5 years' experience in infrastructure engineering supporting Microsoft technologies. Advanced Microsoft 365 administration skills, including Intune and Entra ID. Experience working in hybrid cloud environments, ideally with Azure. Proficient understanding of Active Directory, DNS, DHCP, subnetting, and identity lifecycle management. Deep technical expertise in one or more of the following: Windows Server and IIS Networking (switching, routing, firewalls, load balancing, WAN) x86 server hardware Infrastructure automation tools such as Terraform or PowerShell At least 2 years' experience as a technical escalation point for 1st/2nd line IT support teams. Experience with Azure, Cloudflare, Mimecast, or Zscaler is an advantage. Strong analytical and problem‑solving skills, able to work both independently and as part of a team. Proven ability to deliver projects to agreed timescales and quality standards. Familiarity with ISO 27001, PCI DSS, SOC 2, or similar security frameworks. Driving license and access to a vehicle - travel to south of England data centre locations is required. Fully remote working, with an optional hybrid model at our Cosham office. A fantastic company culture, living our "One Team" and "Growth" values. Opportunities to support the community through volunteer days, fundraisers, and charity events. Join Lead Forensics and help shape the future of our technology infrastructure while being part of a collaborative and ambitious team. #J-18808-Ljbffr

Select how often (in days) to receive an alert: Location: Gosport, England, United Kingdom Role Type: Permanent – Full Time Package: £52,425-£58,250 (salary dependent on experience) + Benefits Role ID: SF19903 Are you ready to be part of the future? At QinetiQ, we’re not just imagining tomorrow we are creating it. From cutting-edge defence technology to ground-breaking innovations our mission is to empower and protect lives. Join us as a Senior Mechanical Design Engineer at our Gosport site, where you will have the opportunity to work with cutting-edge technology in partnership with some of the most brilliant minds. As a Senior Mechanical Design Engineer you will be leading the delivery of mechanical design solutions and taking ownership of delivery on complex tasks, requiring high integrity engineering and managing complex, unusual tasks involving significant challenges. Day-to-day, you’ll will explore and test the problem space thoroughly, guiding others in generating their own hardware solutions and be prepared to lead and co-ordinate the reviews and testing of these ideas at design reviews and group critiques to delight customers. Ideally, you will have gained significant and wide-ranging experience in geometric dimensioning and tolerancing, CAD modelling using NX, configuration control using Teamcenter, and composites manufacture and/or design for composites manufacture. • Reviews: This role involves guiding others and coordinating subject ‑ matter experts through design reviews, including running pre ‑ reviews and chairing internal or lower ‑ level customer reviews, with the potential to progress to full Design Review Chair competency, • Delivery: This role plays a key part in live continuous improvement during delivery, leading and coordinating technical teams to produce optimised designs and clear, detailed reports, • Technical: This role involves providing confident advice and presentations to customers, stakeholders and peers, while driving high technical and professional standards through inventive problem solving and recognised best practice, • Governance: This role requires a solid understanding of safety engineering tools and how they are applied across the project lifecycle, including compiling HAZID outputs and contributing to Design Safety Cases, • We would expect the individual to display both knowledge and practical experience, can function without supervision on a day-to-day basis and be capable of providing guidance and advice to less experienced practitioners in the following competency areas. Including but not limited to:, • Hazard Identification, Safety Cases & Safety Management systems, • Applying Analytical, Simulation and Modelling Techniques, • Materials Selection, Coatings & Corrosion, • Concept Design & Development, • Significant experience creating technical drawings from 3D Models in Siemens NX (or similar CAD tools), working with suppliers, manufacturers, customers, and subject matter experts, • HNC/HND/Degree in Aeronautical or Mechanical Engineering, Industrial Design or Product Design (or equivalent experience), • Industrial Design, Mechanical Engineering, Product Design degree or equivalent (desirable), • Should have achieved CEng level against the UK SPEC and have joined a recognised professional institution and maintaining CPD (desirable) We value difference and we don’t have a fixed idea when it comes to background or education, provided you can show the required level of experience and willingness to learn then we would like to hear from you. This role is 37 hours per week based at our Gosport site with an average site attendance of five days per week. Role primarily requires working on-site with limited opportunity for remote work. Adaptive working offered which includes flexible start and finish times and compressed hours options. Our facilities at the Haslar Marine Technology Park are state-of-the-art, including our ocean basin rotating arm, and marine towing tank, offering an unparalleled environment for testing and refining designs. Our marine technology offers our global customers a service to deliver constrained hydrodynamic model tests of surface ships, submarines, offshore structures, and renewable energy devices Please note that all applicants for this role must be eligible for SC clearance, as a minimum. At QinetiQ we are committed to building an inclusive, accessible and welcoming workplace where everyone feels valued and supported. We believe that a diverse mix of backgrounds, perspectives and experiences drives innovation and leads to better outcomes for our people, customers and communities. We encourage applications from all candidates and are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the recruitment process, please let us know by emailing . One of our recruitment team will contact you. Many roles in QinetiQ are subject to national security vetting being completed, applicants who already hold the appropriate level of vetting may be able to transfer it upon appointment. A number of roles are also subject to additional restrictions, which means factors such as nationality or previous nationalities may affect the roles that you can be employed in. As we continue to grow into new markets around the world, there’s never been a more exciting time to join QinetiQ. The formula for success is our appetite for innovation and having the courage to take on a wide variety of complex challenges. As a QinetiQ employee, you’ll experience a unique working environment where teams from different backgrounds, disciplines and experiences enjoy collaborating widely and openly as we undertake this exciting and rewarding journey. Through effective teamwork, and pulling together, you’ll get to experience what happens when we all share different perspectives, blend disciplines, and link technologies; constantly discovering new ways of solving complex problems in a diverse and inclusive environment where you can be authentic, feel valued and realise your full potential. Visit our website to read more about our diverse and inclusive workplace culture .www.qinetiq.com/en/careers/life-at-qinetiq • Matched contribution pension scheme, with life assurance, • Generous holiday allowance, with the option to purchase additional days, • Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance, • Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more, • We are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition Scheme, • Volunteering Opportunities - helping charities and local community #J-18808-Ljbffr

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Sensor Systems Radar Business in Fareham. At Saab, we are constantly looking ahead and pushing boundaries on what´s considered technically possible. Saab is expanding in the UK and we are now seeking talented and highly motivated engineers to support our radar and sensors growth activities at our Fareham offices. We are recruiting for a Senior Systems Engineer specialising in Positioning, Navigation, and Timing (PNT) and Distributed Sensing. The successful candidate is expected to fulfil the requirements of a Saab Specialist, and act as a technical leader to: drive development, lead innovation and anticipate future trends, identify opportunities, mitigate risks, and advocate change to maintain competitiveness. Also lead competence development, and formulate and maintain Specialist Work Programmes. Key Responsibilities: As a Senior System Engineer, you will be responsible for enhancing our current products, developing improvements and investigating new areas for product growth, as well as supporting the Engineering Team with various Systems Engineering-focussed activities. System Architecture & Design. Lead the architectural design of PNT solutions, integrating Global Navigation Satellite System (GNSS), Inertial Navigation Systems, and alternative PNT (e.g., vision-based, RF-based, or celestial navigation). Architect distributed sensing networks, defining how data is collected, synchronized, and fused across multiple remote nodes to create a unified operational picture. Define system-level requirements, interface control documents, and performance specifications for timing accuracy and positioning precision. Perform trade studies to optimise the balance between size, weight, power, and cost and system performance. PNT & Synchronization Expertise . Implement and optimise high-precision timing distribution protocols (e.g., PTP/IEEE 1588, NTP, or White Rabbit). Develop strategies for PNT resilience, including mitigation of jamming, spoofing, and GNSS-denied environment operations. Lead the selection and integration of atomic clocks, quantum oscillators, and high-grade IMUs. Distributed Sensing & Data Fusion . Design algorithms and architectures for distributed beamforming, phased arrays, or coordinated sensor fusion. Manage the challenges of network latency, jitter and asynchronous data arrival in distributed sensing environments. Collaborate with software teams to implement edge-processing capabilities to reduce data backhaul from sensing nodes. Integration, Test & Evaluation . Develop comprehensive verification and validation (V&V) plans to prove timing and positioning accuracy. Design and execute complex test campaigns using hardware-in-the-loop and software-in-the-loop simulations. Lead the analysis of telemetry and test data to identify systemic errors and drive corrective design changes. Leadership & Mentorship . Serve as the Subject Matter Expert for PNT and Distributed Sensing across cross-functional teams (Radio Frequency, Software, Mechanical). Mentor junior engineers in systems engineering best practices and specialized domain knowledge. Present technical roadmaps and progress reports to senior leadership and external. Skills and Experience: Required Master's or PhD in a related field. A minimum of five to ten years industrial radar, communications or electronic warfare systems experience. A minimum of seven years of experience in systems engineering, specifically focusing on PNT and/or distributed sensor systems. Proven track record with systems utilising GNSS (GPS, Galileo, GLONASS) and Inertial Navigation (Kalman Filtering, sensor fusion). Experience with distributed aperture systems, sensor networks, or Multiple-Input Multiple-Output radar architectures. Proficiency with MATLAB/ Simulink for modelling and simulation. Experience with Model-Based Systems Engineering tools and requirements management tools. Familiar with the principles of ISO 15288:2023. During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship. Desirable RF Knowledge: Strong understanding of RF front-end design, antenna theory and signal propagation. Programming. Proficiency in C++, Python, or Rust for prototyping algorithms. Security. Experience with encrypted PNT signals or secure timing distribution. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. TPBN1_UKTJ

Electronics Engineer Portchester, Hampshire Hours: Monday – Thursday, 8:30am – 5:00pm, Friday 9:00am – 3:00pm £40 - 45K Workshop Recruitment is seeking an experienced Electronics Engineer to join a well-established engineering and manufacturing environment. This is an excellent opportunity for an engineer with strong electronic design and fault-finding skills to work on automated test equipment, electronic hardware and manufacturing automation projects. Key Responsibilities Design, develop and commission electronic hardware and automated test equipment. Carry out fault-finding, repairs, calibration and preventative maintenance on production test systems. Develop analogue and digital electronic circuits and PCB designs. Support new product introduction (NPI) and manufacturing engineering activities. Produce technical documentation, schematics, PCB layouts and bills of materials. Liaise with suppliers and provide technical support to customers. Identify opportunities to improve product reliability, quality and manufacturing efficiency. Skills & Experience HNC, HND, Degree or equivalent in Electronic Engineering or a related discipline. Minimum 5 years' experience in an electronics engineering role, ideally within manufacturing. Experience with analogue and digital circuit design and troubleshooting. Knowledge of PCB design software such as KiCad or equivalent. Understanding of data acquisition systems and electronic test equipment. Practical electrical and mechanical assembly skills, including control cabinet wiring. Strong problem-solving skills and the ability to manage projects independently. Experience with LabVIEW, SQL databases, robotics, machine vision or industrial automation would be advantageous. Apply Now If you are an Electronics Engineer looking for a varied, hands-on role combining electronic design, production support and technical problem-solving, we would like to hear from you. Apply today through Workshop Recruitment. TPBN1_UKTJ

Job Description Join a global leader in semiconductor technology and help develop the next generation of touch and human-machine interface solutions used in millions of products worldwide. \n We're looking for a Senior Design Engineer to join a highly skilled R&D team responsible for the development of advanced sensing and interface technologies used across ndustrial and consumer electronics applications. \n This is a genuinely hands-on engineering role where you'll influence architecture decisions, solve complex technical challenges and work through the full product lifecycle from concept and design through to silicon validation and production. \n \nWhat you'll be doing\n \n \n Designing and developing advanced mixed-signal and embedded solutions \n Defining digital architectures and contributing to RTL development using Verilog/SystemVerilog \n Developing embedded software in C/C++ for sensing, control and signal processing applications \n Supporting silicon bring-up, debugging and validation activities \n Working across hardware, firmware and system-level engineering challenges \n Collaborating with global engineering teams to develop innovative semiconductor products \n Contributing to technology and product roadmaps \n \n \nWhat we're looking for\n \n \n Experience developing digital or mixed-signal integrated circuits \n Strong Verilog and/or SystemVerilog skills \n Embedded software development experience using C/C++ \n Good understanding of microcontrollers and embedded systems \n Experience with Python, MATLAB or similar engineering tools \n Strong analytical and problem-solving skills \n \n \nWhy join?\n \n \n Work on technology deployed in millions of devices globally \n Influence technical direction and product architecture \n Broad exposure across silicon, embedded software and system design \n Collaborative R&D environment with high levels of technical ownership \n Hybrid working and excellent long-term career development opportunities \n Opportunity to work on cutting-edge semiconductor technology with global impact \n \n \n JBRP1_UKTJ

Senior Hardware Systems Engineer Portsmouth Mostly on site 12 months £60.69 per hour (Inside IR35) What you'll be doing: · Generation of design, test and installation documentation · Design proving, including environmental and Electro Magnetic Compatibility aspects · Investigation and resolution of design issues · Design and build of the electrical and hardware system to achieve successful acceptance (FAT(E)) · Support to development systems · Successful installation and setting to work of hardware on ship · Understanding of Configuration Control and baselines Your skills and experiences: Essential: An Engineer with experience in a hardware domain Knowledge and experience of equipment development using Commercially available Off-The-Shelf (COTS) hardware components, preferably with an understanding of blade and PC technology. A can-do, enthusiastic attitude and enquiring mind with a flexible approach & openness to involvement in all aspects of the team's work Desirable: Ability to operate in a large, complex multi-project environment Experience with COTS enclosures (e.g. units, cabinets), design, wiring schedules, power distribution etc. would be especially desirable. Experience working with the Defence sector Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects. Preference will be given to candidates who are professionally registered TPBN1_UKTJ

By joining the Saab UK's Graduate Engineering programme in September 2027, you'll have the opportunity to have hands on practical experience with our unique products, while being supported by your managers, mentors and peers. As a Hardware Graduate Engineer in this position, you will gain valuable e

IC Resources is seeking a Senior Digital ASIC Design Engineer to join its engineering team in Whiteley. You will work on complex ICs from specification through to pre-silicon validation, combining hands-on design, simulation and low-level programming. The role involves reviewing RTL, running simulations, writing low-level code, and collaborating with design, software and hardware teams to deliver next-generation products. #J-18808-Ljbffr

JAM Recruitment Ltd is seeking an Electronic Design Engineer for a 12-month contract in Portsmouth, delivering electronic hardware design and test for Defence Marine. The role focuses on electronics from concept to completion and interfaces with embedded software and PLD engineers. The position involves detailed circuit design, design verification, documentation, and collaboration with cross-functional teams, with a rate of £81.90 per hour Inside IR35. #J-18808-Ljbffr

Senior Digital ASIC Design Engineer - Whiteley A leading semiconductor company is looking for a Senior Digital ASIC Design Engineer to join its engineering team in Whiteley. This is a hands on role combining digital design, simulation and low level programming, with the opportunity to work on complex ICs from specification through to pre silicon validation and beyond. • Reviewing and developing RTL against technical specifications, • Running chip simulations and pre silicon screening, • Writing low level code, including Assembler, to exercise chip functionality, • Supporting the definition of new features for next generation products, • Investigating issues across digital and mixed signal areas, • Working closely with engineers across design, software and hardware, • Strong understanding of digital ASIC design and RTL, • Experience with chip simulation and pre silicon validation, • Experience working with chip databases or similar design environments, • Low level programming experience, ideally including Assembler, • Ability to work from detailed technical specifications and investigate design issues, • Good understanding of digital systems and how they operate at chip level Mixed signal IC experience would be beneficial, particularly exposure to analogue and digital interaction, but is not essential. Tel - LinkedIn - in/jordan-browne-b4a08b20b/ #J-18808-Ljbffr

• Generation of design, test and installation documentation, • Design proving, including environmental and Electro Magnetic Compatibility aspects, • Investigation and resolution of design issues, • Design and build of the electrical and hardware system to achieve successful acceptance (FAT(E)), • Support to development systems, • Successful installation and setting to work of hardware on ship, • Understanding of Configuration Control and baselines, • An Engineer with experience in a hardware domain, • Knowledge and experience of equipment development using Commercially available Off-The-Shelf (COTS) hardware components, preferably with an understanding of blade and PC technology., • A can-do, enthusiastic attitude and enquiring mind with a flexible approach & openness to involvement in all aspects of the team’s work, • Ability to operate in a large, complex multi-project environment, • Experience with COTS enclosures (e.g. units, cabinets), design, wiring schedules, power distribution etc. would be especially desirable., • Experience working with the Defence sector, • Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects. Preference will be given to candidates who are professionally registered #J-18808-Ljbffr

Client: BAE Systems Location: Broad Oak Works, Portsmouth Onsite: 3 to 4 days per week Duration: 12 months Rate: £60.63 PAYE or £81.90 Umbrella Security: BPSS + full SC (UK eyes only / ITAR) BAE Systems is hiring an Electronics Design Engineer to support the electronic aspects of hardware design and test, covering both new product development and technology insertions into legacy products. You'll be involved end-to-end from concept through detailed design, verification, integration and test, working closely with wider engineering teams. You’ll contribute to board and unit-level hardware design, ensuring designs are robust, testable and suitable for introduction into production. The work includes supporting internal test activity as well as external environments (EMC test houses and customer installations where required). • Detailed electronic circuit design, including:, • component selection and evaluation, • schematic capture, • circuit simulation and analysis, • supporting PCB layout teams through the design cycle, • Board and unit-level design & test, including interfaces to higher-level assemblies/systems, • Design verification using a blend of simulation, analysis, and practical test methods, • Support EMC testing activity (including liaising with external test houses) and support to customer installations when needed, • Produce and maintain design documentation, technical reports, and supporting evidence packs (acceptance, fitness for purpose, safety/legislative requirements), • Specify and support bespoke procured hardware, • Work collaboratively across disciplines (systems, embedded software, PLD/FPGA engineers, test, integration), • Support system integration activities and contribute to defect resolution, • Participate in progress reviews, peer reviews and design reviews, • Contribute to developing technical requirement specifications and support higher-level system design as required, • Degree (or equivalent) in Electronic Engineering (or closely related), • Proven experience producing component-level electronic designs that can be introduced into volume production, • Strong digital design background including (as applicable):, • processor interfacing, • memory devices, • PLD interfacing, • UART, SPI, I2C, Ethernet, • Experience with ADC/DAC devices and associated techniques, • Solid analogue design experience (op-amps, transistor-level design, control loops, low-noise techniques), • Experience with design proving, integration, and defect resolution, • Comfortable working to cost and timescale constraints, • Able to communicate complex technical detail clearly and produce strong documentation, • Defence or high safety integrity environment experience, • Low-noise analogue techniques, • High power techniques (kW-level), • FPGA/CPLD development exposure, • Mentoring/coaching other engineers (depending on seniority) You must be able to obtain and maintain BPSS and full SC, and meet UK eyes only / ITAR restrictions #J-18808-Ljbffr

Vulcain Engineering, an international engineering consultancy, supports global industrial leaders in their transition to a more responsible and sustainable future. We support our customers in the design, construction, commissioning and operation of their complex infrastructure projects that will shape the world of tomorrow. With operations in 17 countries and employing over 6,000 staff worldwide, our business responds to the needs of our clients by delivering high-value engineering expertise tailored to our clients’ most complex challenges. In the UK, we have a key focus in supporting ground-breaking major projects across nuclear, energy, and a variety of highly regulated industrial programmes. The Position: Senior Electronics Design Engineer (PCB Design) We are supporting the delivery of complex engineering solutions across life sciences and pharmaceutical sectors, and are currently looking to expand the technical team. We're therefore looking for an experienced Senior Electronics Design Engineer (PCB Design) to join our team to provide specialist electronic hardware and PCB design expertise in support of a major life sciences and pharmaceutical project. Some of the main responsibilities of the Senior Electronics Design Engineer will include: • Lead the design and development of PCB-based electronic systems from concept through to verified prototype., • Develop electronic circuit designs, including component selection, power calculations, and schematic creation., • Propose and evaluate PCB architecture and design concepts to meet project and operational requirements., • Collaborate with PCB design and manufacturing partners to assess technical feasibility and optimise designs for manufacture., • Manage external PCB design and manufacturing partners, ensuring prototype development, technical compliance and on-time delivery., • Define and execute verification and testing activities to demonstrate compliance with project requirements and industry standards., • Support product compliance activities, ensuring designs meet applicable regulations and standards, including CE, IEC and other relevant certifications., • Participate in risk assessments and contribute to requirements traceability, verification and validation activities within a regulated environment. Alongside a commitment to our values of Care & Compassion, Performance, Team Spirit, and Inclusiveness, we are looking for individuals who can bring the following: • Extensive experience in electronic circuit design and PCB-based product development., • Demonstrated ability to independently lead PCB development projects from concept generation through design verification and manufacture., • Experience delivering PCB designs through prototype manufacture, testing, validation and final release., • Strong knowledge of electronic component selection, circuit analysis and power calculations., • Experience working directly with PCB manufacturers and external development partners, including design reviews and production oversight., • Good understanding of PCB prototype development, assembly, testing and troubleshooting., • Knowledge of relevant standards and regulations such as IEC 61010, IEC 60204-1, IEC 61326-1, RED, CE and other product certification requirements., • Experience working within regulated environments, ideally pharmaceutical, medical device, life sciences or other regulated industries., • Experience of GAMP5, validation processes, or other regulated product development methodologies., • Strong communication skills in English and the ability to work closely with cross-functional stakeholders, suppliers and manufacturing partners., • Reside locally to Portsmouth or be prepared to relocate, as this permanent role does not include travel expense coverage. Please note that visa sponsorship is not guaranteed and is assessed on a case-by-case basis, depending on role criticality and project needs. Many of our UK projects require high-level security clearance, meaning we can often only consider candidates with an existing, indefinite right to work in the UK. Exceptionally, we may consider visa sponsorship for applicants with niche experience aligned to our core work. We also offer a benefits package, both standard and enhanced, which is designed to support your wellbeing, development, and financial future, including: • 25 Days Annual Leave + Bank Holidays, with the ability to swap bank holidays for cultural or religious celebrations, • Enhanced Maternity, Paternity, Adoption and Neonatal Care Leave, • Employee Referral Scheme, • Private Medical & Dental Insurance, • Electric Vehicle Scheme, • Cycle to Work Scheme, • Training & Development, including additional qualifications and accreditations relevant to your role, • Travel Insurance – for both business and personal travel, • Employee Assistance Programme At Vulcain Engineering, we offer more than just a job, we offer a rewarding career with endless opportunities for growth and development. You'll be part of a talented team of professionals working on exciting and meaningful projects and making a real impact across highly regulated industries including life sciences, pharmaceuticals, energy and nuclear. We offer a dynamic and collaborative work environment where your talents are valued, and your contributions are recognised. Vulcain Engineering UK is an equal opportunities employer. We are committed to creating a diverse and inclusive workplace where everyone is valued and respected. We welcome applications from all individuals, regardless of background, and do not discriminate based on age, gender, disability, ethnicity, religion, sexual orientation, or any other protected characteristic. If you require any reasonable adjustments during the recruitment process, please let us know, and we will be happy to accommodate your needs. We appreciate every application. However, due to the volume we receive, we’re only able to contact candidates who are shortlisted for this role or who may be a strong fit for future opportunities. #J-18808-Ljbffr

Title: Senior FPGA Engineer Date: 9 Oct 2026 Location: United Kingdom, Whiteley, Hampshire, GB DTC | A Codan Company develops advanced wireless communication technology used in some of the world’s most demanding environments. From software defined radios and high performance wireless networks to communications for defence, uncrewed systems, government and broadcast applications, our engineers work on complex products where FPGA, software, electronics and RF come together. We’re looking for a Senior FPGA Engineer to join our engineering team in Whiteley. If you have strong FPGA design experience and are confident working in VHDL, we’d like to hear from you. We’re flexible about the industries, devices and tools you’ve worked with. You’ll develop FPGA solutions for our embedded communications products, working closely with engineers across software, electronics, RF and systems. • Designing and implementing FPGA functionality in VHDL, • Verifying designs through simulation and testing on real hardware, • Integrating FPGA designs with processors, embedded software and other hardware, • Investigating design and system level issues during development and testing, • Contributing to technical decisions from early design through to product release, • Improving and supporting FPGA designs in existing products You’ll be able to see your designs running on physical products and understand how they contribute to the performance of the complete communication system. The two things we’re particularly interested in are hands‑on FPGA design experience and strong VHDL skills. As this is a senior role, you should also be comfortable taking ownership of your work, solving complex problems and contributing your judgement to design discussions. Beyond that, we’re open minded. You might have worked in communications, defence or another field entirely. You don’t need experience with our specific devices, products or applications to be considered. • AMD/Xilinx devices or Vivado, • Verilog, • Digital signal processing, RF or software defined radio, • High speed data paths or real‑time systems, • Embedded C/C++, Python or embedded Linux, • MATLAB or similar modelling tools, • Automated testing, CI/CD or source control, • Board level hardware, schematics or laboratory test equipment, • IP networking or secure development practices If your strength is FPGA design in VHDL and you’re interested in applying it to wireless communications, we’d welcome your application even if much of this list is new to you. Interesting engineering You’ll work on sophisticated wireless products alongside specialists in embedded software, electronics, RF and signal processing. Real products, real impact Your designs will run in communication systems used across defence, government, uncrewed platforms and broadcast applications around the world. Room to develop You’ll have opportunities to deepen your FPGA expertise and build knowledge in new areas of communications technology. Our employees receive: • 25 days’ annual leave plus bank holidays, • Company pension with matching up to 9%, • Company bonus scheme, • Flexible core working hours, • Annual pay reviews, • Personal training and development, • Income protection, • Life assurance, • Employee Assistance Programme, • Modern working environment in Whiteley, • Onsite subsidised café You’ll also be joining a global organisation with engineering and technology teams across the UK, USA, Denmark, Singapore, Dubai and Australia. Successful applicants will need to be willing and eligible to obtain UK Security Clearance. #IND2 #J-18808-Ljbffr

BAE Systems is seeking an Electronics Design Engineer to support electronic hardware design and testing, covering new product development and technology insertions into legacy products. You will work end-to-end from concept to verification, integration and test, closely with wider engineering teams. The role involves board and unit-level design, design verification, EMC testing coordination, and producing design documentation. #J-18808-Ljbffr

Raymarine, a Teledyne Technologies division, seeks a Design Engineer to develop robust mechanical components and sub-systems from concept to production. You will craft 3D models and drawings in SolidWorks, apply DFx principles, run prototypes and verifications, and work with hardware, software and suppliers to meet performance and regulatory standards. This hands-on role requires engineering excellence, strong teamwork, and a willingness to travel to suppliers and customers. #J-18808-Ljbffr

HE Space is a successful international space company, specialised in providing managed services and human resources to the international space sector for over 40 years. We hire space experts all over Europe across the whole spectrum of space-related activities, from engineering to science, software development, operations, marketing, finance and administration. Our employees contribute towards a wide range of groundbreaking space programmes including Galileo and Copernicus, ExoMars, Iris2, ESA BASS, ESA GSPT, LISA Pathfinder, Euclid, the Ariane and Vega launchers as well as the International Space Station. HE Space has joined forces with CS Group and Sopra Steria to lead the engineering and digital space market in Europe and to provide highly skilled consulting. We are passionate about people and invest in you to support the development of the European space industry. The Functional Validation Engineer - Payload Software (PLSW) is responsible for validating the Payload Software on a telecoms satellite programme, which controls and manages in-flight payload mission execution for the Digital Transparent Processor. The role focuses on translating functional validation requirements into automated test procedures, executing tests across simulation and hardware environments, and supporting software verification and non-regression activities. The role operates within the Functional Validation (FV) team, working closely with Functional Validation Architects, Technical Leads, and software development teams. Validation activities are performed using both the SATSIM numerical bench and hardware RF test benches to verify software performance against specified requirements. • Analyse functional validation requirements and convert them into automated test procedures (APs) using Java;, • Develop, maintain and execute automated test scripts and associated configuration files;, • Prepare hardware and simulation environments for test execution, including SATSIM and RF test benches;, • Configure and operate RF equipment, including modems, signal generators, spectrum analysers and DC power supplies;, • Execute functional validation and software non-regression test campaigns against new PLSW releases;, • Verify software behaviour against defined requirements and acceptance criteria;, • Produce clear and concise test execution reports and communicate results to the FV Technical Lead and FV Architect;, • Investigate test observations, anomalies and unexpected behaviours, performing initial analysis and fault isolation;, • Record and manage defects, observations and validation issues using Jira and established FV processes;, • Identify and report discrepancies between SATSIM and hardware bench results to improve simulation fidelity;, • Upload test sessions, logs and evidence intoFV tooling, ensuring full traceability of validation activities;, • Develop and maintain offline processing and automation tools using Java, Python or other appropriate technologies;, • Support test strategy, test specification development, traceability activities and validation documentation;, • Collaborate with geographically distributed stakeholders, including teams located in Toulouse and Portsmouth;, • Proactively manage dependencies, risks and blockers, escalating issues early to maintain delivery schedules., • Experience in software verification, validation or integration testing within a complex engineering environment;, • Ability to interpret detailed validation requirements and develop robust automated test procedures;, • Strong Java development skills for automated test script creation and maintenance., • Experience of Linux-based environments;, • Experience using source control and software lifecycle tools, including Git, SVN, Jira and Confluence;, • Knowledge of software development and validation processes, including traceability and configuration management;, • Experience of hardware and software integration testing;, • Strong analytical and troubleshooting skills with the ability to investigate complex technical issues., • Strong understanding of RF principles and test equipment setup, including:, • RF signal generators;, • Spectrum analysers;, • Modems;, • DC power supplies., • Experience working with hardware RF test environments;, • Knowledge of CCSDS standards and space communications protocols, including:, • Telecommand (TC) and Telemetry (TM);, • PUS packets;, • TM Frames;, • TC Segments;, • CLTUs;, • CLCW., • Java development;, • Software verification and validation;, • RF equipment configuration and operation;, • Linux;, • CCSDS standards;, • Git/SVN;, • Jira/Confluence., • Python development;, • MobaXterm;, • Satellite communications systems;, • Aerospace or space industry experience;, • Safety-critical software validation experience;, • Experience with numerical simulation environments such as SATSIM., • Excellent written and verbal communication skills;, • Ability to work effectively with distributed teams and technical stakeholders;, • Strong attention to detail and quality focus;, • Proactive approach to issue identification, dependency management and risk mitigation;, • Ability to work independently within a safety-critical and highly controlled engineering environment;, • Strong organisational skills with the ability to manage multiple validation activities concurrently; This job is located in Portsmouth, United Kingdom. An exciting and dynamic international working environment awaits you! Inclusive and committed employer, our company works every day to combat all forms of discrimination and promote a respectful working environment. That's why, committed to gender diversity and overall inclusivity, we encourage all applications and profiles. Last apply date: 30/10/2026! #J-18808-Ljbffr

Software Engineer Salary: Competitive, negotiable based on experience, plus benefits including a 7% pension contribution, 25 days holiday, and life insurance Location: Portsmouth, hybrid working Sirius Digital is a trusted provider of expertise in Software Engineering, Data Science, and AI, supporting clients in the defence, nuclear, space, and energy sectors. We specialise in software modelling and simulation, robotics and autonomous systems, as well as data science and engineering, delivering technical consultancy and innovative solutions. We are seeking a Software Engineer who combines strong technical skills with problem-solving ability and effective communication. You will work independently or as part of small teams, helping Sirius Digital grow while advancing your own expertise. We offer a competitive benefits package and clear opportunities for rapid career progression. Key Responsibilities: • Deliver technical consultancy projects to a high standard, • Develop and implement software solutions across areas such as wargaming, simulation, autonomous systems, digital twins, and synthetic environments, • Build and sustain strong client relationships, • Apply mathematical and computational techniques to solve real-world problems, developing innovative approaches as needed What We're Looking For: • Experience designing and delivering performant software applications, ideally within a technical consultancy environment, • Knowledge of software modelling and simulation techniques, • Ability to analyse requirements and define technical specifications, • Experience in one or more of the following: videogame engine technology (e.g., Unreal Engine, Godot), entity or event-based simulation, robotics, and autonomous systems, • Proficiency in C/C++, familiarity with Python., • Willingness to learn new technologies and programming languages, • Ability to apply mathematical or statistical methods to scientific or applied challenges, • Confidence working with large codebases and understanding hardware/performance constraints, • Strong interpersonal skills for client and stakeholder engagement, • Experience preparing technical reports and presenting to customers, • Willingness to travel within the UK and work on client sites as required Desirable: • Background working with Defence Digital, DE&S, Dstl, Frontline Commands, or the UK Defence industry, • Degree in a STEM or computing discipline, or equivalent experience, • Proficiency with MS Office (Excel, PowerPoint, Word) What We Offer: • Mentoring, internal and external training, and access to sector specialists and online learning, • Comprehensive benefits including a 7% pension contribution, private healthcare, life assurance, additional holiday purchase options, and an electric vehicle scheme Other Requirements: • Candidates must have an existing right to live and work in the UK., • Candidates will need to undergo an internal BPSS check prior to gaining site access., • Candidates will also need to either be willing and eligible or to undergo a Security Clearance check (SC level) or hold a current SC clearance upon starting their employment with the company. To gain SC clearance you will normally need at least 5 years' UK residency. JBRP1_UKTJ

Microchip Technology Inc. in Whiteley, Hampshire, UK, is seeking a Senior Design Engineer to shape the next generation of touch controllers and HMI solutions. You will work across hardware, firmware, and system-level design in a collaborative R&D environment. You will contribute to capacitive sensing architectures, RTL verification, and embedded software development, influencing products used globally in automotive, industrial and consumer markets. #J-18808-Ljbffr

Electronics Engineer Portchester, Hampshire Up to £40,000 8:30am to 5:00pm Monday to Thursday 9:00am to 3:00pm Friday Design. Develop. Innovate. Are you an Electronics Engineer looking for a role where you can make a real impact across product development, automation, manufacturing and customer support? We're looking for a proactive and technically capable Electronics Engineer to join a growing engineering team in Portchester. This is an excellent opportunity to work on advanced electronic systems, automated test equipment (ATE) and sensor technologies while contributing to exciting new product development projects. You’ll be involved in everything from circuit and PCB design through to commissioning, fault-finding, customer support and continuous improvement, giving you genuine variety and technical challenge every day. As an Electronics Engineer, you will play a key role in designing, developing and supporting electronic hardware solutions while ensuring the reliability and performance of production test systems and manufacturing equipment. Key responsibilities include: • Designing, developing and commissioning electronic hardware for automated test equipment and automation projects, • Supporting and maintaining manufacturing equipment and production test systems, • Troubleshooting, repairing and calibrating electronic systems, • Designing analogue and digital electronic circuits and PCB layouts, • Supporting New Product Introduction (NPI) activities alongside R&D, Quality and Production teams, • Providing technical support to customers integrating sensor technology into their products, • Managing suppliers and sourcing electronic components and assemblies, • Producing technical documentation including schematics, specifications and test procedures, • Driving improvements in quality, reliability, efficiency and test capability To be successful in this role, you will have: • HNC, HND or Degree in Electronic Engineering or a related discipline, • Around 5 years' experience in an electronics engineering environment, • Strong analogue and digital circuit design and fault-finding skills, • PCB design experience using KiCad or similar software, • Knowledge of GitHub, GitLab ou equivalent version control systems, • Experience with data acquisition systems and test equipment, • Excellent problem-solving and communication skills, • The ability to work independently and collaboratively within a team, • LabVIEW, • SQL databases, • Industrial automation, • Robot programming, • Machine vision systems, • New Product Introduction (NPI), • Manufacturing environments, • Salary up to £40,000(based on experience), • Early finish every Friday, • Diverse and technically challenging projects, • Exposure to innovative technologies and automation systems, • Supportive and collaborative working environment, • Training and professional development opportunities, • The opportunity to influence products from concept through to manufacture If you're passionate about electronics, enjoy solving complex engineering challenges and want to play a key role in developing innovative technology, we'd love to hear from you. INDENG #J-18808-Ljbffr

Altera is seeking a General Support Engineer to provide hands-on technical support for FPGA-based platforms in the Aerospace, Defense, and Government sector. You will perform board- and system-level bring-up, validation, and debugging in lab and customer environments, tackling SI/PI issues and high-speed interfaces such as DDR, PCIe, and Ethernet. You will collaborate with FPGA, hardware design, and software teams to diagnose system-level challenges and develop validation plans, RTL FPGA #J-18808-Ljbffr

QinetiQ Limited in Gosport is seeking a Senior Mechanical Design Engineer to lead mechanical design delivery on complex tasks, owning end-to-end outcomes. The role emphasizes high integrity engineering and collaboration with cross‑functional teams to meet demanding engineering challenges onsite. You will champion design reviews, guide technical teams through validated processes, and drive continued improvements while coordinating with customers and stakeholders. #J-18808-Ljbffr

Expleo Group in Portsmouth is seeking a Systems Engineer to develop and execute automated test procedures for satellite payload systems, validate CCSDS-based communications, and perform integration testing on satellite simulators and hardware test benches. You will work with the FV Architect and FV Tech Lead to break down tests, create automation tools, manage configurations, and provide clear test reports across teams. #J-18808-Ljbffr

A leading semiconductor company is looking for a Senior Digital ASIC Design Engineer to join its engineering team in Whiteley. This is a hands on role combining digital design, simulation and low level programming, with the opportunity to work on complex ICs from specification through to pre silicon validation and beyond. • Reviewing and developing RTL against technical specifications, • Running chip simulations and pre silicon screening, • Writing low level code, including Assembler, to exercise chip functionality, • Supporting the definition of new features for next generation products, • Investigating issues across digital and mixed signal areas, • Working closely with engineers across design, software and hardware, • Strong understanding of digital ASIC design and RTL, • Experience with chip simulation and pre silicon validation, • Experience working with chip databases or similar design environments, • Low level programming experience, ideally including Assembler, • Ability to work from detailed technical specifications and investigate design issues, • Good understanding of digital systems and how they operate at chip level Mixed signal IC experience would be beneficial, particularly exposure to analogue and digital interaction, but is not essential. #J-18808-Ljbffr

Matchtech Group is seeking a Senior Hardware Systems Engineer for a contract role on-site at Broad Oak, Portsmouth, supporting complex maritime programmes. You will design, test, and install electrical/hardware systems and contribute to FAT(E), EMC, and environmental considerations. The role requires experience in hardware engineering and COTS components, with a proactive, team-oriented approach. On-site in Portsmouth with a demanding multi-project environment and rigorous configuration control #J-18808-Ljbffr

JAM Recruitment Ltd is seeking a Senior Hardware Systems Engineer in Portsmouth, primarily on site for a 12-month contract. The role involves leading design, testing, and installation documentation for shipboard hardware, with emphasis on EMC, environmental considerations, and successful FAT(E) acceptance. The candidate will contribute to development systems, resolve design issues, and ensure robust configuration control and baselines across complex multi-project environments. #J-18808-Ljbffr

• Salary: Up to £65,000DOE, • Full Time, • Permanent SubSea Craft is a fast growing, privately-funded, UK-based innovative maritime technology company specialising in next-generation, high-performance watercraft and systems. We operate at the intersection of advanced engineering, cutting-edge design, and user-centric innovation, delivering safe, effective, and enabling solutions for both commercial and defence applications. • Annual Leave - Entitlement to 25 days of annual leave plus bank holidays, • Wellbeing Day - An additional Wellbeing Day each year to focus on personal health and wellbeing., • Private Healthcare - Access to comprehensive private healthcare coverage to support your physical and mental wellbeing., • Life Assurance and Critical Illness Cover - Comprehensive protection including Life Assurance (4x salary) and Critical Illness Cover for added financial security., • Family Leave - Enhanced maternity and paternity pay, • Christmas Leave - A Christmas shutdown is typically observed., • Professional Development - Commitment to ongoing learning and career growth, supported by training programmes and access to LinkedIn Learning., • Pension Contribution - pension scheme with the option to contribute via salary sacrifice, • Flexible Working - Opportunities for flexible working arrangements to promote work-life balance., • Inclusive Culture - A professional environment that values diversity, innovation, and collaboration., • Offsite Parking available. We're looking for an Electrical Design Engineer with a keen interest in developing, integrating, and prototyping electrical and electronic systems for special-purpose engineering platforms. You will join our, fast-paced Engineering team and contribute to projects from initial concept through detailed design, prototype build, testing, and validation. The role combines electrical design and systems engineering with practical, hands-on workshop activities. You will work on power distribution, wiring and harness design, electronic component selection, motor, sensor and communications integration, and the electrical assembly of prototype systems. The ideal candidate takes a pragmatic, hands-on approach to engineering challenges and is comfortable working in an iterative development environment with a "fail fast, learn faster" mindset. • Assist in the ongoing development of electrical and electronic systems for special-purpose engineering platforms, including Unmanned Aerial Systems (UAS)., • Produce electrical designs including system architecture, schematics, wiring diagrams, cable/harness designs, connector specifications, and power distribution systems., • Perform electrical calculations and engineering assessments, including power budgets, voltage drop, current loading, cable sizing, protection requirements, and component derating., • Assist with the integration of sensors, flight controllers, communications systems, telemetry equipment, and other electronic subsystems., • Produce and maintain appropriate engineering documentation, including BOMs, drawings, interface definitions, test procedures, build documentation, and design records., • Support off-site system and flight trials at external test locations, including troubleshooting and modification of prototype systems., • Work with suppliers and external partners on component selection, procurement, technical queries, obsolescence, and regulatory/compliance requirements., • Support electrical testing and validation activities, including bench testing, test-rig activities, continuity and insulation checks, functional testing, system commissioning, and fault diagnosis., • Support configuration and commissioning of embedded and control hardware and, where required, interface with associated software., • Undertake a combination of office-based engineering design and hands-on workshop activities, including wiring, soldering, crimping, cable assembly, electrical installation, fault finding, and prototype modification., • Support the selection and integration of electrical and electronic components, including power supplies, batteries, sensors, actuators, motors, controllers, communications equipment, and embedded hardware., • Undertake rapid prototyping of electrical systems and subsystems, progressing designs from initial concepts through to fully functioning prototypes. Required: • Bachelor's or master's degree in Electrical/Electronics or Mechatronic Engineering, Aerospace Engineering, Robotics or other relevant STEM discipline., • Practical experience designing, building, integrating, or testing electrical/electronic systems., • Understanding of electrical engineering fundamentals including DC power systems, circuit protection, grounding, signal integrity, cable sizing, connectors, and electrical interfaces., • Hands-on ability with electrical assembly and test equipment, such as multimeters, oscilloscopes, bench power supplies, soldering equipment, and crimping tools., • Experience producing and interpreting electrical schematics, wiring diagrams, and technical documentation. Note: Due to the nature of work undertaken at SubSea Craft, the selected candidate must be capable of meeting the security requirements of the position, which would include as a minimum existing right to live and work in the UK, Baseline Personnel Security Standard (BPSS), with UK National security clearance required for certain roles.* Our people are our greatest asset, we continually strive to provide an excellent working environment to enable our team to do their best work. We have an agile professional workforce: weare founded on the belief that our people are valued and our business is trusted, inclusive and commercially-adept. • Teamwork, mutual respect and collaboration, • Initiative and independent working, • Honesty and integrity, • Business and commercial awareness, • Agility, adaptability and continuous development We are committed to building an inclusive, diverse workplace where everyone can thrive. If you require any support or adjustments to interact with us, please let us know. • Please note that all offers of employment are conditional and subject to satisfactory DBS, driving licence and reference checks. A criminal record will not automatically disqualify candidates from employment. We will consider criminal record information alongside the wider range of evidence gathered at the application, interview, and pre-employment checking stages. Due to the high volume of applications, we are unable to respond to everyone. If you are shortlisted, we will aim to contact you within 14 days of your application or the closing date (if stated). We may retain your details for future suitable roles unless you advise us otherwise. For details of how we process your personal data, please refer to our Privacy Notice. #J-18808-Ljbffr