Hardware engineer jobs in GlasgowCréer des alertes d'emploi

Job Title: Hardware Engineer Location: Glasgow Salary: Up to £55,000 (DOE) About the Role: This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology. We are seeking a Hardware Engineer to support the design, development and optimisation of electronics for their next generation of products. You will work along... ZIPC1_UKTJ

Scottish Power Renewables are looking for a CDM Principal Designer Coordinator to join their EA2 project. Role: CDM Principal Designer Coordinator Business: Scottish Power Renewables - EA2 Duration: initial contract to 31st Dec 2026, with renewal in line with the project requirements (2028 estimate) Location: London or Glasgow/hybrid style working Rate: Inside IR35, Umbrella and PAYE options available Main Purpose of Job ScottishPower Renewables (SPR) is appointed as the Principal Designer for the East Anglia Two (EA2) project. The Project Engineering Manager has the role of Principal Designer Lead on the projects and is responsible for ensuring that SPR fulfils the duties of a Principal Designer (PD) under the CDM 2015 Regulations. Working as part of the Design Assurance team, the CDM PD Coordinator will be key in supporting the Engineering Manager in fulfil this remit. The CDM PD Coordinator will be responsible for monitoring the development of the design ensuring CDM compliance (PD approach) throughout the lifecycle of the project, where hazard identification and safety is a priority. They must ensure that all Designers working on the project comply with their duties under CDM ensuring that they co-operate with each other and liaise with the Principal Contractor (PC) for the duration of the project. In addition to specific CDM related tasks, the CDM PD Coordinator will also work closely with the wider Engineering Management and Design Assurance team to support workstreams related to design assurance, certification and interface management. To successfully fulfil this remit, the successful candidate should have extensive experience in project engineering and design coordination roles, in addition to a good working knowledge of CDM. Ideally, this experience will be within the Offshore Wind sector. Key Tasks • CDM specific tasks of the CDM Principal Designer Coordinator will be:, • Take part in developing and ensuring Project procedures are followed, including but not limited to: CDM Strategy and Procedure, Design Management Plan including Design Risk Registers, Hazard Management in Design, Interface Management Plan., • Identify and implement improvements to existing procedures as required to improve the Principal Designer activities and general CDM compliance. Develop new procedures where appropriate., • Maintain the Pre-Construction Information, Pre-Construction Interface Matrix and Pre-Construction Interface Register., • Review communications with Tenderers and Contractors relating to project procedures. In the case of Tenders, that would entail the evaluation of proposals. In the case of Contracts, to identify and implement the required actions (documents, reports, meetings, presentations, or others) related to Principal Designer duties and CDM compliance., • Ensure the Principal Designer prepares the Health and Safety File. Liaise closely with the Principal Designer to ensure the structure and content of the file are per the expectations and requirements of CDM Regulations. Support fully this process where and when necessary., • Identify the project documents relevant to the Principal Design Duty and CDM compliance. Review such documents and identify and perform the required actions, including but not limited to producing comments, organize clarifications, produce clarifying documents, hold meetings, etc., • Take part in design meetings to oversee the development of the design from Principal Designer and CDM compliance perspective., • Organise and/or participate in interface meetings (or other relevant type of meetings) with Contractors and Subcontractors, to ensure actions and decisions are understood and recorded., • Monitor and report on performance and progress of Designers, Contractors and Subcontractors (as applicable) regarding Principal Designer duties and CDM compliance., • Attend Temporary Works Meetings and arrange PD/PC meetings., • Additionally, the CDM PD Coordinator will be required to support the wider Engineering Management team in the following activities:, • Design assurance process development., • Support and coordinate between Project Package teams in relation to design assurance practices and processes, identification and assessment and documentation of design related risks., • Due diligence and auditing of consultants and contractors, • Support packages in conducting suitable design, construction and operability reviews., • Support the Engineering Management team and the wider Project Team in ad-hoc activities as required, when reasonable and related to the role and/or skills Key Criteria • Degree qualified within a relevant Engineering discipline., • Chartered Engineer (or working towards) and Membership of an appropriate professional institution, or equivalent experience., • Demonstrable knowledge and experience of working on projects (UK Offshore Wind preferred) under The Construction (Design and Management) Regulations 2015, and knowledge of UKs Health and Safety Legislation in general., • Completion of relevant CDM training courses (Principal Designer training preferred)., • Experience in Engineering Design roles, preferably on large multi-disciplinary infrastructure/ energy projects. Design Management experience will be positively assessed., • At least four years post-graduate experience working on pre-FID and Execution stage offshore windfarm projects, or similar., • Competent on MS Office, Electronic Document Management Systems and able to review design drawings in CAD software., • Strong interpersonal, communication and influencing skills, to collaborate effectively with the wider project team including Third Parties, Contractors, Subcontractors and Contractors. The selected person will be part of a multidisciplinary and multicultural team, distributed across various locations in the UK (mainly London and Glasgow) and Europe., • Availability and flexibility to attend face-to-face meetings in SPR offices in London and Glasgow. Suitability to travel occasionally to meetings and site visits within the UK and Europe. For the days of working remotely (as agreed with the manager): * • suitable internet connection for videoconferences, uploading and downloading large files, and modern remote working and collaboration software, • adequate hardware (camera and headset) to clearly hear, see, be heard and be seen, • suitable conditions to participate actively in the videoconferences.

Job title: Mechanical Design & Test Engineer Location: Glasgow We’re working with an innovative and fast-growing space-sector company that is looking to appoint a Mechanical Design & Test Engineer to support its orbital launch ambitions. This role would suit an experienced engineer (typically 5–10 years’ industry experience) from the space, aerospace, or high-performance product design sectors, or someone with highly transferable skills and a hands-on mindset. The Role You’ll be involved across the full product lifecycle from concept and detailed design through to build, integration, and rigorous testing. The work is varied, technically challenging, and highly collaborative. You’ll gain exposure to a wide range of technologies and techniques, including: • Composites fabrication, • Product development and prototyping, • Infrastructure commissioning, • Integration and system-level testing Key Responsibilities • Create detailed 3D CAD models and 2D manufacturing drawings (SolidWorks / Autodesk), • Lead and contribute to design reviews (internal and external), • Collaborate with electronics engineers on subsystem integration (PCBs, sensors, comms hardware), • Develop mechanical solutions across structures, propulsion, thermal management, and safety systems, • Apply DfX principles to support efficient manufacturing and servicing, • Define and execute test plans (shock, vibration, thermal cycling, IP standards), • Analyse test results, drive design improvements, and support prototype builds, • Communicate complex technical information within a multi-disciplinary team Essential Skills & Experience • BEng (Hons) or higher in Mechanical / Aerospace Engineering, or equivalent experience, • Strong background in mechanical design for complex electro-mechanical products, • Proficiency in 3D CAD and PDM software, • Hands-on hardware testing experience, • Knowledge of manufacturing processes (CNC, injection moulding, sheet metal, 3D printing), • Ability to obtain and hold UK security clearance (BPSS), • Strong communication and technical documentation skills Desirable Experience • Composites or advanced materials, • Pressure systems and PSSR, • Systems engineering principles, • Working knowledge of FEA / CFD, • Practical, hands-on prototyping skills

We are seeking an experienced Software Engineer to join our Sat OS team (which develops the high-level operating system for the spacecraft). The successful candidate will play a crucial role in developing software for our satellite systems, contributing to the expansion and enhancement of our space-based payload execution and data collection capabilities. Ideal candidates will embrace the commercialisation of nanosatellite systems and adapt to low-cost, fast-paced systems design, development, and implementation methodologies that set Spire apart from our competition. In this fast-paced environment, the design to launch cycle is measured in weeks and months, not years! What You’ll Do as a Sat OS Software Engineer: • Develop services in Python/Rust that interface with hardware integration layers using modern protocols, • Implement communication interfaces between higher-level processes, including ground to space commanding, • Migrate legacy Python systems to a new Rust-based, distributed architecture, • Contribute to the design and implementation of fault-tolerant systems to meet the demands of new customer missions, • Collaborate closely with the Platform Engineering team to ensure optimal software-hardware integration, • Create and maintain comprehensive documentation for APIs and system architectures, • Contribute to the continuous improvement of our development processes and tools, • Perform ground-based testing and in-orbit verification of new software services, • Implement observability solutions for satellite-side services, • 5+ years experience in professional software development, • Proven experience in production-grade software development using at least one compiled language, • Proficiency in Python or equivalent high-level language, • Knowledge of Linux-based development, • Experience with inter-process communication protocols (such as gRPC), • Ability to communicate effectively with embedded software engineers, • Excellent documentation skills, • Familiarity with safety-critical software systems in any industry, • Knowledge of version control systems, particularly Git and GitHub, • Familiarity with CI/CD pipelines, • Experience with project management tools, • Proficiency in scripting languages like Bash, • Proficiency in Python and Rust, • Understanding of cybersecurity principles systems, • Knowledge of telemetry and command systems, • Python, Rust, Bash, • Ubuntu (development environment) Spire operates a hybrid work model, and this position will require you to work a minimum of three days per week in the office. Access to US export-controlled software and/or technology may be required for this role. If needed, Spire will arrange the necessary licenses—this is not something candidates need to have before applying. Global Perks 🛰️ Name Your Satellite Program (NYSP) 🚀 Launch Attendance 🌴 Generous Time Off Policy 🎓 Education Assistance Program 🥰 Employee Assistance Program (EAP) 📈 Employee Stock Purchase Program (ESPP) 👣 Family Leave 💪 Fitness Reimbursement 🧡 Employee Referral Program 🍉 Healthy snacks & beverages in every office About Spire We improve life on Earth with data from space. Spire Global is a space-to-cloud analytics company that owns and operates the largest multi-purpose constellation of satellites. Its proprietary data and algorithms provide the most advanced maritime, aviation, and weather tracking in the world. In addition to its constellation, Spire’s data infrastructure includes a global ground station network and 24/7 operations that provide real-time global coverage of every point on Earth. Spire is Global and our success draws upon the diverse viewpoints, skills and experiences of our employees. We are proud to be an equal opportunity employer and are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or veteran status. To help maintain a safe and secure workplace for Spire employees, all candidates who receive a conditional offer will be required to complete a background check. This may include criminal history and employment verification. Please take a moment to review ___, as well as ___ Kindly be advised that communication regarding your application may come from @spire.com, @recruiting.spire.com, or from Candidate.fyi (our scheduling tool).

Electronics Engineer Hybrid Working - 3 days onsite per week The Company A technology innovator developing advanced satellite platforms and mission-ready hardware. You’ll join a multidisciplinary team pushing the boundaries of spacecraft performance, reliability, and manufacturability. The Role As an Electronics Engineer, you’ll take ownership of designing and integrating custom electronics that power next-generation satellites. You’ll work across the full lifecycle from early concepts and architecture through to board bring-up, validation, and preparing hardware for launch. Key Responsibilities • Lead electrical design for spacecraft subsystems, from requirements capture to detailed schematics, • Select and evaluate components, including sensors, radios, power systems, and high-speed digital devices, • Create PCB layouts (Altium) with strong DFM and reliability considerations, • Design power supplies, monitoring circuits, and high-speed digital interfaces, • Perform circuit simulations, worst-case analysis, and signal/power integrity reviews, • Support board bring-up, debugging, hardware validation, and environmental test campaigns, • Collaborate with software, mechanical, and manufacturing teams to ensure seamless system integration Experience & Skills • Solid understanding of analogue and digital electronics, • Hands-on PCB design experience (rigid, flex, rigid-flex), • Familiarity with FPGA-based systems and high-speed digital design principles, • Experience with communication protocols: I2C, SPI, CAN, UART, USB, RS485/422, PCIe, Ethernet, etc., • Strong debugging skills using oscilloscopes, logic analysers, VNAs, and similar equipment, • Nice-to-have: space-grade standards, SI/PI tools (e.g., HyperLynx), FPGA coding (VHDL/Verilog), embedded/DSP experience, EMI/EMC-conscious design What’s on Offer • The chance to work on real spacecraft hardware with direct mission impact, • Hybrid working environment with modern lab facilities, • Career growth, technical ownership, and involvement in cutting-edge space engineering, • Competitive compensation and a comprehensive benefits package What’s Next? Please apply with your CV, or reach out directly to Daniel Salway or Jim Merryfield at CleanTech Talent for a confidential discussion. CleanTech Talent is acting as the exclusive hiring partner for this role.

Ready to engineer precision in the world of biotech? Join our client's cutting-edge team and play a vital role in developing the instrumentation that powers tomorrow's breakthroughs. R&D Partners is seeking a motivated Training Specialist to join our client within the Technical Services department. This is a field-based role focused on delivering training and support for healthcare solutions in Scotland. You will play a key role in ensuring customers are confident in using blood glucose and ketone monitoring systems while contributing to an excellent customer experience. Regular travel across the region, including overnight stays and occasional unsocial hours, is required. Initial product training and team meetings may also involve travel to our UK head office in West Sussex. Please note that to be considered for this role you must have the right to work in this location. Responsibilities: • Provide training to customers on healthcare products and ensure all sessions meet company standards., • Record training activities and maintain compliance with internal guidelines., • Respond to customer inquiries related to training, installation, and troubleshooting., • Support the implementation of hardware and software during product launches. Key Skills and Requirements: • Degree-level education or equivalent experience., • Background in nursing or familiarity with NHS Primary and Secondary Care organizations., • Experience designing and delivering customized training programs., • Knowledge of medical systems, quality assurance, and customer relationship tools., • Proven ability to troubleshoot and provide on-site support., • Awareness of the diagnostics industry and experience in multicultural environments., • Strong understanding of medical concepts and practical applications in healthcare., • Valid UK/EU driving license and passport for potential travel., • Fluent in written and spoken English with good communication and organisational skills. For more information, please contact Grant Van Schalkwyk. If you are interested in applying to this exciting opportunity, then please click 'Apply' or to speak to one of our specialists visit the 'Contact Us' page. R&D Partners is a leading life sciences recruiter focused on finding exceptional people and matching them with the finest positions across the globe. R&D Partners is acting as an Employment Agency in relation to this vacancy. By submitting this application, you confirm that you've read and understood our privacy policy, which informs you how we process and safeguard your data -

Monitor, administer, and maintain servers within server and communications rooms. Server Engineer Experience: Must have strong experience with Windows Server (2019/2022) Must have hands-on experience with VMware vSphere. Must have experience with Dell computer and storage hardware.

Role: Embedded Software Engineer Location: Glasgow Salary: up to £55,000 approx. We design and develop across a full stack of disciplines – Mechanical, Electronic, Electrical and Software Engineering – within the Digital team we develop software for IoT edge devices, cloud services, frontend UI, AI/ML models in computer vision, and Data Analysis. About the Role: We are seeking a talented and passionate Embedded Software Engineer to join our growing technology team. You will play a crucial role in designing, developing, and implementing embedded software for our next-generation technology. You will be involved in the full software development lifecycle, from requirements gathering to deployment and maintenance, working closely with hardware engineers, data scientists, and aquaculture specialists. What you’ll be doing: • Design, develop, and debug embedded software and firmware, • Write clean, efficient, and well-documented code Python for embedded systems., • Work with microcontrollers, microprocessors, and real-time operating systems (RTOS)., • Implement communication protocols (e.g., MQTT, UART, SPI, I2C, Ethernet, Bluetooth, LoRaWAN) for data transmission and device control., • Integrate software with various hardware components, including sensors, actuators, and communication modules., • Participate in the full software development lifecycle, including requirements analysis, design, implementation, testing, and deployment., • Develop and execute unit, integration, and system tests to ensure software quality and reliability., • Troubleshoot and debug software and hardware issues in embedded systems., • Collaborate effectively with hardware engineers, data scientists to define system requirements and ensure seamless integration., • Contribute to the continuous improvement of our software development processes and tools. What we’re looking for: • Bachelor's degree in Computer Science, Electrical Engineering, or a related field., • Proven experience (typically 2+ years) in developing embedded software and firmware., • Strong proficiency in Python programming for embedded systems., • Experience working with microcontrollers and microprocessors (e.g., ARM Cortex-M, ESP32, NVIDIA Jetson)., • Knowledge of communication protocols relevant to IoT and industrial automation (e.g., MQTT, Modbus)., • Solid understanding of communication protocols (e.g., UART, SPI, I2C, Ethernet, Bluetooth, LoRaWAN)., • Experience with debugging tools and techniques for embedded systems (e.g., JTAG, oscilloscopes, logic analyzers)., • Ability to read and understand hardware schematics and datasheets., • Experience with C/C++, BASH, etc. for embedded systems or scripting., • Experience with cloud platforms (e.g., AWS, Azure, Google Cloud) and IoT services., • Familiarity with data acquisition and processing techniques., • Understanding of control systems and algorithms., • Experience with version control systems (e.g., Git)., • Experience with agile development methodologies. What we offer: • 33 days annual leave (including bank holidays), • Death in service at 4 x your annual salary, • Employee Assistance Programme, • Enhanced parental leave policies, • Birthday day off, • Paid bereavement and sick leave, • Company salary sacrifice pension scheme, • Cycle to work scheme, • Regular social breakfasts, lunches and team events

Mfp printer /hardware/computer field engineer - Glasgow.

Join OCI’s Edge Security team as a Principal Engineer to architect and deliver cloud-scale DDoS protection. You’ll lead design for high-performance detection and mitigation systems, drive automation and operational excellence, and set the technical direction for customer-facing DDoS capabilities across OCI’s global edge. This role requires deep expertise in Linux networking data path and kernel-level networking (such as XDP, eBPF, DPDK, iptables, nftables), in addition to strong systems and DevOps engineering experience. Basic qualifications • 7–10 years building production backend systems, including 3–5 years in high-scale and/or low-latency environments., • Deep expertise in Linux networking data path and kernel-level networking (e.g., XDP, eBPF, dpdk, iptables, nftables) for traffic processing, filtering, and observability., • Proficiency in one or more: Java/Python/C++/Rust/Go (strong preference for Java for control-plane/services)., • Deep systems design expertise: concurrency, memory management, performance tuning, API design, consistency models, and distributed systems fundamentals., • Proven DevOps leadership at scale: CI/CD, automated testing, canarying, rollout/rollback, configuration management., • Strong IaC experience (e.g., Terraform) and solid cloud infrastructure fundamentals., • Domain experience in DDoS or network security services and common attack/defense patterns., • Advanced networking knowledge: TCP/IP, IPv4/IPv6, BGP, routing policy; DNS fundamentals., • Demonstrated operational excellence and observability practices (metrics, tracing, alerting). Preferred qualifications • Expertise with anycast routing, global traffic steering, and multi-region service readiness., • Experience with SDN, programmable data planes, or hardware mitigation platforms., • Building high-rate telemetry/streaming pipelines for near-real-time detection (packet/flow analytics)., • Background in resilience engineering, chaos testing, disaster recovery, and capacity planning at hyperscale., • Containerization/orchestration (e.g., Kubernetes) and secure service-to-service communication (mTLS, policy enforcement)., • Familiarity with zero trust, segmentation, and modern security architectures; exposure to compliance frameworks and audit preparation. How you’ll have impact • Deliver core DDoS detection/mitigation that protects OCI’s Tier 0 availability and customer trust., • Launch customer-facing DDoS offerings with self-service policy, visibility, and strong defaults., • Raise engineering quality, automation, and compliance maturity across the stack; mentor and grow the team’s technical bar. Ways of working • Security and privacy by design with auditable controls and policy adherence from day one., • Data-driven delivery with clear KPIs, SLOs, and stage gates from prototype to GA., • Collaborative, inclusive culture emphasizing design docs, code reviews, and knowledge sharing. What you’ll do • Lead architecture and delivery of low-latency backend services for DDoS detection, classification, and mitigation., • Define and evolve scalable data/control planes (policy, signaling, telemetry, orchestration) with strong fault isolation, resiliency, and compliance-by-design., • Own traffic engineering strategy (anycast, BGP policy, routing integration) and partner with networking, DNS, and edge platform teams., • Set operational standards: SLOs/SLAs, on-call health, incident response (including incident commander duties), runbooks, and post-incident learning., • Drive automation at scale: CI/CD strategy, test frameworks, progressive delivery (canary/blue-green), and infrastructure-as-code., • Establish robust observability (metrics, logs, traces) and capacity/scale models for high-throughput, highly available services., • Lead threat modeling, architecture reviews, and audit readiness for Tier 0 services; ensure security and privacy are embedded through the lifecycle., • Mentor engineers, influence cross-org roadmaps, and collaborate with Product, SRE, and Network Engineering from concept to GA.

The Oracle Cloud Infrastructure (OCI) Offensive Security team provides OCI with the capabilities to ensure our systems and services meet the security objectives we communicate to customers. The Offensive Security group performs security assessments, vulnerability research, static and dynamic analysis research, penetration testing, red-teaming, and security tool development. We ensure the security of the software and hardware that runs our cloud infrastructure and strive for continuous improvement. The OCI Offensive Security group works as a team. We don't fit people into predefined roles. We bring together the right people who enhance team capability and build roles around each team member's skills and interests. Offensive Security Engineer Oracle Cloud Infrastructure Group The Oracle Cloud Infrastructure (OCI) Offensive Security team provides OCI with the capabilities to ensure our systems and services meet the security objectives we communicate to customers. The Offensive Security group performs security assessments, vulnerability research, static and dynamic analysis research, penetration testing, red-teaming, and security tool development. We ensure the security of the software and hardware that runs our cloud infrastructure and strive for continuous improvement. The OCI Offensive Security group works as a team. We don't fit people into predefined roles. We bring together the right people who enhance team capability and build roles around each team member's skills and interests. Values are OCI's foundation and how we deliver excellence. We strive for equity, inclusion, and respect for all. We are committed to the greater good in our products and our actions. We are continually learning and taking opportunities to grow our careers and ourselves. We challenge each other to stretch beyond our past to build our future. You can learn more about us by visiting ___. Are you interested in building large-scale distributed security systems and tools for the cloud? Do you love the idea of working in an environment with the excitement of a start-up, but the financial backing of a Fortune 100 company? This role offers huge upside potential, high visibility, and fast career growth without the risks of a typical start-up. We are growing fast, maturing, and working on results-oriented initiatives. A security-focused leader can have significant technical and business impact. This is a unique opportunity to work with smart people to solve complex problems in distributed systems, security, and multi-tenant Infrastructure-as-a-Service (IaaS) operating at massive scale. The biggest challenges for the team is the dynamic and fast growth of the business, driving us to improve our systems, tools, and automation to scale to our security expertise several orders of magnitude greater than what we can support today. We understand that software is living and needs investment. The challenge is making the right tradeoffs, communicating those decisions effectively, and crisp execution. We hope you like working at scale as much as we do because Oracle has no shortage of it! Craft the future of one of the largest clouds on earth with us! Our ideal candidate is a hardworking and hands-on engineer who cares about security and improves their knowledge every day. We're looking for hands-on cloud hackers with expertise and passion in identifying and exploiting complex security problems in distributed, multi-tenant services and infrastructure. We operate distributed systems at a high scale, worldwide. These are the foundations of our cloud environment. Our customers run their businesses on our cloud, and our mission is to provide them with a best-in-class and ever-expanding set of cloud-based services. A security-focused engineer at any level can have significant technical and business impact. Come shape the future of one of the largest clouds on earth with us. To get you excited, here is a list of some of the projects over the last year this team has worked on: • Big iron - ExaLogic, ExaData, UltraSPARC, InfiniBand, • Firmware reverse engineering of various hardware components, • Developing custom fuzzing platforms for code-coverage analysis, • Several different hypervisors, • Linux and Windows kernel mode non-sense Responsibilities • You enjoy diving into complex source code audits to reveal subtle security vulnerabilities, • Writing new tools such as fuzzers in languages such as C/C++, Python, Ruby, Go or Java,, • Tearing apart an undocumented file format or network protocol, • Coming up with novel techniques to solve unique and interesting security problems, • Review new services, including their integration points with existing services, • Guide security projects beyond the scope of performing assessment work, • Identify and disclose vulnerabilities to 3rd party vendors, • Design complex systems and services that improve quantity or quality of offensive security output, • You'll reviews new features of moderate complexity in existing systems, identifying areas of new risk created; work with service teams to explore and recommend mitigations; and collaborate across service teams and security stakeholders., • Review new services, including their integration points with existing services, • Guide security projects beyond the scope of performing assessment work: identifying and disclosing vulnerabilities to 3rd party vendor or design of complex systems and services that improve quantity or quality of offensive security output, • You'll drive organization wide improvement in the form of engineering practices, security architecture, operation practices or development practices., • 6+ years of experience in vulnerability discovery / security engineering / application security, • Threat modeling experience of microservice architectures, • Experience working in a large cloud or software company, • Extensive research or experience with multiple classes of security bugs, • Evidence of contribution to the security community in the form of conducting training / thought leadership / conference talks / publications, • Improve security throughout the organization, identifying areas of risk or opportunities for improvement and piloting them, • Be a subject matter expert in at least one business-critical area (e.g. cryptography, hardware security, operating systems, authentication protocols, fuzzing, DoS mitigation, networks, distributed systems), • Collaborative track record working between internal teams and external organizations, • Excellent organizational, verbal and written communication skills, • Intermediate knowledge of Linux OS Internals, • Undergraduate or Graduate degree in Electrical Engineering, Computer Science, or another related field or equivalent work experience., • Hands-on experience developing services on a public cloud platform (e.g., AWS, Azure, Oracle), • Building continuous integration/deployment pipelines with robust testing and deployment schedules, • Experience working with internal customers and translating requests into prioritized work or features, • Expertise in applying risk identification techniques to develop security solutions, • Experience and understanding of Cryptographic algorithms, standards, implementation and application, • Experience and understanding of threat modeling, penetration testing, reverse engineering and attacks on software, • Experience working with large enterprise customers

Do You Cry Tears of Joy When You See a Perfectly Centered Div? Do You Think “Pixel-Perfect” Should Be a Legally Binding Contract? If you answered yes to either of the above, keep reading. You might be my clients kind of crazy. It's a next-generation DeFi protocol, which is a fancy way of saying they’re building the financial future and it needs to not look like crap. They’re looking for a Senior Front End Engineer who understands that in DeFi, the “Front End” is the only “End” most users will ever see (unless everything breaks, then they see Twitter/X). Your Mission, Should You Choose to Accept It: • Turn breathtaking Figma designs into breathtaking, responsive, actually-working web apps., • Make complex blockchain interactions feel as smooth as ordering a suspiciously cheap latte. Users should swap tokens, not swear words., • Wrestle with Web3 libraries, wallets, and gas estimations until they submit to your will., • Be the voice of reason that says, “No, we cannot animate the entire UI to look like a burning yacht,” but also the visionary who makes the data charts sing. Why They Won’t Totally Annoy You: • A Backend That Doesn’t Suck: Their devs speak more than just “protocol.” They promise not to send you JSON that looks like it was formatted by a feral raccoon. (We have this in writing), • Real Problems, Not Pretend Ones: Forget endless todo apps. You’ll be building the interface for billions in liquidity. Your grandma still won’t understand what you do, but she’ll be impressed by the word “billions.”, • The Usual Bribe Package: Competitive salary, tokens (the kind you hope moon), remote-friendly vibes, and a budget for hardware that won’t make you weep. You Are: • A wizard with React, TypeScript, and the mystical arts of state management., • Someone who sees a “minor CSS tweak” request and doesn’t immediately draft their resignation letter., • Intrigued by the wild west of Web3 UX, and brave enough to try and civilize it., • Able to explain what a “DEX” is without using the words “magic internet money” or sighing for 30 seconds.

First Point Group is recruiting for a Core Network Engineer (Ericsson/Nokia) with specific previous experience working on Virgin Media / VMO2 and/or BT/EE networks and projects. The successful candidate will have extensive experience within operational support, optimisation, and evolution of a next-generation IMS and 5G core network. This is a fully remote role based on a daily rate contract. Please note - sponsorship cannot be provided, so candidates must live in the UK with valid rights to work. Responsibilities • Perform daily configuration, operation, and maintenance (O&M) of IMS Core network nodes to ensure continuous service availability., • Monitor network KPIs and proactively provide performance improvement recommendations across internal and external IMS Core platforms., • Collaborate with cross-functional teams using automation and analytics tools to improve operational efficiency., • Execute parameter configuration changes on the 5G Standalone Core platform, including cloud-native core environments and subscriber data platforms., • Manage performance monitoring and alerting for 5G SA Core networks using modern observability tools (metrics, logging, and alert management)., • Conduct service validation, acceptance testing, and end-to-end functional testing for IMS and 5G SA services., • Audit core network nodes and services to ensure maximum availability, resilience, and compliance with operational standards., • Lead capacity planning activities for Core network elements, ensuring scalability and alignment with traffic growth and service demand., • Handle end-to-end KPI and KQI analysis across Core and interdependent network domains., • Diagnose and resolve complex IMS Core network issues related to configuration, software, hardware, products, and services., • Support the integration, commissioning, and acceptance of new Core network nodes and services, including project and vendor coordination., • Provide L2/L3 operational support and escalation handling for Core network incidents, including roaming-related issues., • Perform pre- and post-implementation analysis of IMS Core KPIs following network changes and optimisation activities., • Manage product and software lifecycle activities across all Core network nodes, including upgrades, patches, and decommissioning. Key Skills & Experience • Strong hands-on experience with IMS Core and 5G Core network environments, • Proven expertise in Core network operations, performance management, and troubleshooting, • Experience working with cloud-native Core architectures and automation-driven operations, • Solid understanding of KPIs, KQIs, and end-to-end service assurance, • Ability to manage complex incidents and collaborate across engineering, operations, and vendor teams, • Experience supporting live production networks in a high-availability environment

Role : Design Verification Engineer Mode : Remote Type : Contract Location : EU & UK Description : • Functional Bring-up of SOC interfaces like – LPDDR, Ethernet, PCIe, HBM, CPU’s, Low speed Ios (UART, I2C, I3C, SPI), Coherent Mesh etc., • Develop bare metal C tests and debug using FPGA HAPS / Zebu emulation platforms & later in actual silicon-based target hardware, • Develop test infrastructure for the above, • Work closely with other stakeholders: Architects, RTL verification, Electrical testing & characterization, Production firmware, • Essential skills: Strong in Embedded C, any of the high speed protocol experience (PCIe Gen6, die to die links, LPDDR5, HBM3), ARM high end CPUs, ARM cache coherent interconnect protocol, and validation experience on pre / post Si platforms., • Desirable skills: Python, Silicon SOC bring-up, High speed interface device drivers

Imagine working for one of the world’s biggest tech companies with the luxury of working from home. For a PDK Engineer, this is such an opportunity – we’re looking for an experienced PDK (Process Design Kit) Engineer to be based anywhere in the UK and help build the silicon team for one of the world’s greatest innovators. Working with one of the world’s most reputed silicon teams, the PDK Engineer will be responsible for the organization, maintenance, and distribution of all Foundation IP and PDK assets such as standard cell libraries, memory compilers, EDA tools and runsets. The role involves the efficient tracking, retrieval, installation, and verification of these assets from various vendors to support project needs, and will involve quarterly trips so the silicon design office based in London. The right candidate for this role will be: • An experienced engineer, with a proven track record in standard cell layout and PDK development, • Highly knowledgeable in the various library views, EDA tools’ techfiles and runsets, • Experienced in software development in one or more programming languages, and with data structures/algorithms, • highly organized, detail-oriented, with a strong understanding of hardware physical design libraries’ views formats and inventory management principles Visa sponsorship is available for the right candidate if needed. Get in touch to find out more about this unique opportunity: contact Caroline Pye @ IC Resources.

We currently have an exciting opportunity for a Broadcast Project and Support Engineer to join a leading broadcast technology company on a permanent basis. You’ll split your time between project delivery where you will be installing, configuring and commissioning new deployments and support where you will be investigating live customer systems, diagnosing issues, implementing changes and coordinating software fixes with the development team. The company offer fully remote working so candidates can be based anywhere in the UK. What you’ll do • Install, configure, test and commission software solutions across multiple concurrent projects., • Prepare test materials (video, audio, subtitles, graphics) and deliver focused end-user training., • Document accepted customer configurations and manage upgrades, rollbacks and hotfix deployments methodically., • Troubleshoot - capture logs, replicate issues, create high-quality JIRA tickets, validate fixes and close the loop with customers., • Collaborate cross-functionally with Project Management and Development; suggest correct/expected behaviours and test code prior to release., • Support database config, backup/restore, and querying (T-SQL / Microsoft SQL Server)., • Occasional International travel - Although remote configuration is used, there are certain projects where you will be required to travel to the clients sites. What you’ll bring • Background in broadcast / media technology working with broadcast software based systems, • Working knowledge of Windows Server 2016/2019, IT networking, information security, monitoring/performance tools, and hardware troubleshooting., • Beneficial knowledge includes - XML, SQL (T-SQL), Microsoft SQL Server, TCP/IP, HTTP, FTP, RS232/RS422, Windows Registry, RAID; Atlassian (JIRA/Confluence)., • Additionally knowledge of SMPTE ST 2022/2110, NMOS standards and/or C++ fundamentals would be advantageous, • Excellent written and verbal communication - fluent English (additional languages a plus). If you are fully eligible to work in the UK without the need for sponsorship and are happy to work in a fully remote role then please apply now for consideration.

We're hiring a Senior Electronics Design Engineer to support complex embedded and hardware systems within high-integrity defence programmes.

Senior Electronics Production Engineer. Extensive Electronics Hardware Experience. Expertise in harnessing, mechanical assembly, and electronics assembly.

Control & Protection Electrical Hardware Design Engineer page is loaded## Control & Protection Electrical Hardware Design Engineerlocations: Glasgow, Scotland, United Kingdomtime type: Full timeposted on: Posted Todayjob requisition id: R0088797**Location:*

As an Offshore Cable Project / Mechanical Engineer, you will provide day‑to‑day expertise to the Offshore Cables Engineering team, focusing on hardware design and key technical decisions. The role is client‑facing, requiring strong communication skills and the ability to support Project Manage

A leading technology innovator in the UK is seeking an Electronics Engineer to design and integrate custom electronics for next-generation satellites.

My client, a globally recognised audio manufacturer based in Glasgow, is seeking a highly skilled Electronics Design Engineer with strong analogue expertise.Like the look of this opportunity Make sure to apply fast, as a high volume of applications is expected Scroll down to read the complete job description.This is an exceptional opportunity to work on cutting-edge, low-noise electronics for some of the best music systems in the world.This position is ideal for an engineer who thrives in both analogue and digital domains.You will design, test, and refine complex mixed-signal circuitry used in premium audio systems where noise performance, signal integrity, and precision are critical.Youll work on-site within a technically exceptional R&D team dedicated to pushing the boundaries of high-end audio design.Based in Glasgow, this company is internationally renowned for producing some of the highest-performing audio systems in existence.Their engineering is rooted in deep analogue expertise, innovative mixed-signal design, and meticulous craftsmanship.This is a rare chance to contribute to world-class products with a company that values long-term employee development.Essential Requirements (must haves) for the Electronics Design Engineer: Excellent understanding of analogue circuit principles (op-amps, filters, noise optimisation, precision signal paths).This will be technically tested.Practical experience in FPGA design using VHDL or Verilog.Ties to Glasgow or Scotland- they seek engineers committed to a long-term future with the company.Already eligible to work in the UK- no visa sponsorship or overseas relocation.On-site role- all-remote working is not available.Genuine enthusiasm for audio electronics and precision design (not just being a musician).Key Responsibilities for the Electronics Design Engineer: Design, simulate, and test mixed-signal circuits for high-end audio devices Develop analogue front-ends with extremely low noise and distortion Work on data conversion stages, DSP pathways, and FPGA-based control Generate schematics, work closely on PCB layout optimisation, and validate prototypes Collaborate with hardware, software, and acoustic engineering teams Ensure designs meet the companys world-class audio performance standards Interested? Apply Today! xjlbheb If youre a Electronics Design Engineer with strong analogue knowledge, send your updated CV to Mike at Or contact Mike directly on Take the next step in your career and help shape the future of world-class audio engineering.

A global leader in embedded computing is seeking a Principal Electronics Engineer in Northamptonshire.The role involves leading technical projects and a cross-functional engineering team on high-performance products.Ideal applicants will have extensive experience in hardware development, particularl

A global leader in IT services is seeking a Desktop and Site Support Engineer in Cuprum. The role involves providing desktop support for hardware and software issues, ensuring excellent customer service, and maintaining IT equipment.

A leading engineering firm located in Glasgow seeks a Senior Electrical Design Engineer to design and lead the control cabinet layout involving numerous circuit boards for high-voltage direct current (HVDC) solutions.The role encompasses hardware implementation, coordinating design documents, and en

A global technology leader in electrification is seeking a Senior Electrical Design Engineer in Glasgow.You will design and lead control cabinet layouts for HVDC systems, manage hardware integration, and support project teams.The role requires a degree in electrical engineering, strong leadership ex

As a Desktop Support Engineer you will provide desktop support to company employees, both on‑site and at home for any issues reported. Desktop and Site Support Engineer. General BAU tasks include ticket management, hardware & software support, fault finding, troubleshooting, deployment, networking

Electrical installation knowledge. The Installation & Commissioning Team. As an Engineer, you will be responsible for supporting the correctly defined installation and commissioning of the T26 Shared Infrastructure and associated hardware.

An aviation technology firm in Scotland is looking for a Systems Engineer focused on Integration & Test. This position involves leading hardware-software integration, creating test plans, and ensuring customer acceptance of advanced flight simulation systems.

A leading semiconductor company is seeking an Embedded AI Platform Security Engineer to design and implement security solutions for ML models running on embedded hardware.

Software Engineer - Python - Container Images. Python Software Engineer - Ubuntu Hardware Certification Team. Software Engineer - Solutions Engineering.

A leading IT service provider located in Glasgow is seeking a skilled IT Support Engineer to provide exceptional onsite support for various hardware products.The successful candidate will be responsible for diagnosing and repairing PCs, laptops, printers, and servers according to service level agree

Field Service Engineer - IT Desktop and Printer Support. Provide break/fix support for printers, MFPs, laptops, desktops, and associated hardware. Experience with hands-and-feet network support, including replacing switches, patching, and hardware swaps.

This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology.

Due to continued growth, my client are looking for a talented Senior Hardware Engineer, who will have a critical part to play in their end-to-end product development journey. You'll also play a key role in developing graduate engineers, sharing your expertise to develop the next generation of talent

Collaborate with embedded engineers to ensure hardware and firmware integrate reliably. Conduct hardware bring-up, prototype validation and debugging. Investigate and resolve hardware-related issues across the product lifecycle.

A Senior Hardware Design Engineer is sought to join an innovative engineering team in Essex, responsible or leading projects designing, developing, and testing hardware solutions that contribute to our range of high-performance products. The Senior Hardware Design Engineer, Essex, will lead technica

Hardware Engineer (Embedded / Electronics)£45,000 - £47,000 DOE + Career Progression + 8% Bonus + Hybrid Post Probation + Training + Company Benefits YorkAre you a Firmware / Hardware Engineer with experience across digital hardware, FPGA and embedded firmware development, looking for an opportuni

Job Title: Hardware Engineer Location: Glasgow Salary: Up to £55,000 (DOE) About the Role: This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology. We are seeking a Hardware Engineer to support the design, d

Job Profile for Hardware Engineer- RF45454Position: Hardware EngineerLocation: StevenageSalary: £40,000-£50,000Our client, based in Stevenage, are a rapidly growing UK-based health tech start-up that's building wearable technology with the power to support people living with neurological condition

Conduct hardware bring-up, prototype validation and debugging Work with cross-functional teams to refine designs for manufacturability, reliability and safety Develop test plans and perform electrical, functional and environmental testing Investigate and resolve hardware-related issues across the pr

Mfp printer /hardware/computer field engineer - Glasgow.

This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology.

They deliver hands‑on hardware services covering deployments, relocations and decommissioning, and are now looking to add a practical Hardware Engineer to the team. Hands‑on hardware engineering experience across mixed environments. The role covers hardware build, installation, cabling and decom

This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology.

A UK-based IT services provider is seeking a practical Hardware Engineer to support hardware build, installation, and decommissioning across various customer sites.

About the Role: This is an exciting opportunity to join a growing engineering team as they develop the next generation of intelligent, high-performance technology.

Create test plans for highly configurable IPs meant to provide interconnectivity between components across an SoC, chiplet, or multi-chiplet systems.Write UVM/SystemVerilog code to implement the test plan, checkers, and scoreboards.Collaborate with software teams to define and implement configurable