Offres heating engineer à CardiffCréer des alertes d'emploi

Role: Gas safe and Plumbing Engineer \n Location: South Wales \n Salary: £42,000 – £48,000 DOE \n Hours: Monday – Friday, 8am – 5pm (Full-time, Permanent) \n Our client is seeking an experienced Gas Safe and Plumbing Engineer to join its internal team, delivering domestic refurbishment, property maintenance and insurance reinstatement projects throughout South Wales. \n This is a varied, hands-on role covering plumbing and heating surveys, fault diagnosis, general plumbing repairs, first and second-fix installations, boiler and central heating work, bathroom and kitchen plumbing, testing, commissioning and appropriate multi-skilled duties. \n Projects will involve both occupied and vacant residential properties requiring repair or reinstatement following fire, flood, escape of water or accidental damage. You will work across the full project lifecycle, from initial inspection and diagnosis through to installation, certification and handover. \n Gas work must be undertaken strictly within your current Gas Safe registration categories, ACS qualifications and demonstrated competence. \n The successful candidate will also support the company with obtaining and maintaining Gas Safe business registration and associated compliance processes. This may include being listed as an engineer against the company’s registration, subject to Gas Safe Register requirements, and supporting assessments, inspections, certification and record keeping. \n A professional, considerate and customer-focused approach is essential when working in homeowners’ and policyholders’ properties. \n Key responsibilities: \n\n • Undertake plumbing, heating and gas surveys, inspect existing installations, diagnose faults and assess damage caused by insured events. Identify whether systems can be repaired, retained or require replacement, isolate unsafe services where necessary and accurately record findings.\n, • Complete first and second-fix plumbing and heating installations, including hot and cold-water services, heating pipework, soil and waste systems, sanitaryware, radiators, valves, pumps, cylinders, controls and domestic appliances. Install and pressure-test approved pipework systems and rectify defects.\n, • Install, replace, service, repair and commission domestic boilers and heating systems within current Gas Safe categories. Carry out gas tightness testing, purging, appliance testing, heating system flushing, cleaning, dosing and balancing, and inspect flues, ventilation and combustion arrangements.\n, • Complete bathroom, kitchen, shower-room and utility-room plumbing, together with general maintenance and remedial work including leak detection, taps, valves, toilets, wastes and minor pipework alterations. Undertake careful strip-out, refitting and minor making-good where competent.\n, • Coordinate works with project managers and other trades, review scopes, identify materials and report variations or discrepancies. Test and commission completed works, maintain accurate records and certificates, and explain completed systems to customers.\n, • Support Gas Safe business registration and compliance, including assessments, inspections, certification, record keeping, quality control and Building Regulations notifications. Ensure all gas work remains within the applicable registration categories and qualifications.\n\n Essential Qualifications and Experience: \n\n • Current Gas Safe registration and valid Gas Safe ID card, covering the domestic gas categories required, with current ACS qualifications.\n, • Recognised plumbing or domestic heating qualification, apprenticeship, NVQ or equivalent.\n, • Strong experience in domestic plumbing and heating, including boiler installation, servicing, repair, fault finding, central heating, first and second-fix plumbing, bathrooms, kitchens and general maintenance.\n, • Competence in testing, commissioning and completing gas safety and installation documentation.\n, • Good knowledge of gas safety requirements, Building Regulations and water regulations, with the ability to interpret drawings, specifications and manufacturers’ instructions.\n, • Ability to identify unsafe conditions and follow appropriate isolation, reporting and escalation procedures.\n, • High standard of workmanship, strong diagnostic ability and practical multi-skilled capability.\n, • Full UK driving licence and willingness to travel throughout South Wales.\n, • Willingness to support the company with obtaining and maintaining Gas Safe business registration.\n\n Desirable: \n\n • Level 3 Plumbing and Domestic Heating qualification or equivalent.\n, • Unvented hot-water qualification and additional LPG, cooker, fire or appliance categories.\n, • Manufacturer boiler/heating accreditation or experience with modern energy-efficient systems, smart controls and zoning.\n, • Experience in residential refurbishment, property maintenance or insurance reinstatement, particularly following fire, flood or escape of water.\n, • Experience managing projects from survey to completion and preparing reports, scopes, estimates and material schedules.\n, • Asbestos awareness training and experience with Gas Safe business registration and compliance procedures.\n\n Skills and Attributes: \n The successful candidate will have excellent plumbing, heating and gas diagnostic skills, a strong commitment to safety and quality, and a professional customer-focused approach. You will be organised, reliable and adaptable, able to manage your workload, work independently or alongside other trades, and communicate technical information clearly to customers. \n You must be respectful when working in occupied homes and willing to undertake reasonable multi-skilled duties within your competence, while recognising when specialist expertise, additional authorisation or certification is required. \n

Mechanical Design Engineer – Building Services \n \n 📍 Cardiff \n \n 💰 £45,000 – £55,000 \n \n 🕒 Full-Time | Permanent \n \n The Role \n We’re looking for a Mechanical Design Engineer to join an established Building Services consultancy in Cardiff, working across a strong portfolio of commercial, industrial, education and public-sector projects. \n \n This is an excellent opportunity for an Intermediate to Senior Engineer with a solid MEP background who wants to take ownership of mechanical designs from concept through to detailed design and delivery. \n \n What You’ll Be Doing \n\n • Designing HVAC, heating, ventilation, air conditioning and public health systems\n, • Producing mechanical calculations, specifications and technical reports\n, • Developing and coordinating designs using Revit\n, • Working closely with electrical, structural and architectural teams\n, • Supporting projects from concept through to construction\n, • Attending design meetings and liaising with clients and project teams\n, • Ensuring designs meet current British Standards, regulations and client requirements\n\n \n What We’re Looking For \n\n • Proven experience in Mechanical Building Services Design\n, • Strong knowledge of HVAC and MEP systems\n, • Confident using Revit within a building services environment\n, • Experience with Hevacomp, MagiCAD, IES VE or similar design software\n, • Strong understanding of mechanical calculations and system design\n, • Consultancy or MEP experience\n, • Degree, HND or equivalent in Mechanical / Building Services Engineering\n\n \n Desirable \n\n • Working towards CIBSE / IMechE membership or professional accreditation\n, • Experience across commercial, education, healthcare or industrial projects\n, • Strong client-facing and communication skills\n\n \n Why Join? \n\n • £45,000 – £55,000 salary\n, • Work on varied and technically interesting building services projects\n, • Join an established consultancy with a strong project pipeline\n, • Excellent technical and professional development opportunities\n, • Clear progression towards Senior / Principal Engineer\n, • Support towards professional accreditation\n\n \n If you’re a Mechanical Design Engineer with genuine Building Services experience and want to work on high-quality MEP projects, we’d like to hear from you.

Intermediate / Senior Mechanical Building Services Engineer \n \n 📍 Cardiff \n \n 💰 £45,000 – £60,000 DOE + Benefits \n \n The Opportunity \n We’re looking for an Intermediate / Senior Mechanical Building Services Engineer to join a growing in-house design team delivering major commercial, healthcare, education, industrial and public-sector projects. \n \n This is a role with real technical ownership. You’ll work across projects from concept through to construction, with the opportunity to lead designs, work directly with clients and, at Senior level, mentor junior engineers. \n \n What You’ll Be Doing \n\n • Design mechanical building services from concept to detailed design\n, • Deliver HVAC, heating, cooling, LTHW, CHW and public health systems\n, • Carry out heating, cooling, hydraulic and pipe sizing calculations\n, • Design plantrooms and select mechanical equipment\n, • Produce specifications, reports and technical schedules\n, • Coordinate designs across Revit / BIM and multidisciplinary teams\n, • Attend client, design and site meetings\n, • Support projects through construction, commissioning and handover\n, • Review technical submissions and resolve contractor queries\n\n \n What We’re Looking For \n\n • Strong background in Mechanical Building Services Design\n, • Consultancy or Design & Build experience\n, • Confident with Revit and AutoCAD\n, • Experience with MagiCAD, Hevacomp, IES VE or TAS\n, • Strong technical understanding of HVAC and mechanical systems\n, • Ability to manage multiple projects and work to deadlines\n, • Excellent communication and coordination skills\n\n \n What's On Offer \n\n • 💰 £45,000 – £60,000 DOE\n, • Professional membership support – CIBSE / IMechE\n, • CPD and technical training\n, • Genuine progression into Senior / Principal-level roles\n, • High-quality, technically challenging projects\n, • Growing design team with long-term opportunities\n, • Supportive, collaborative working environment\n\n \n The Opportunity \n If you're a Mechanical Building Services Engineer looking for better projects, greater responsibility and a clear route to progress, this is an opportunity worth exploring.

Senior Mechanical Engineer - Building Services Location: Cardiff / Bristol Type: Full-time, Permanent Salary: £45,000 - £60,000 (dependent on experience) Overview An established building services consultancy is seeking an experienced Senior Mechanical Engineer to join its growing team in either Cardiff or Bristol. This is an excellent opportunity for a technically strong engineer with at least five years' experience in mechanical building services design who is looking to lead projects, mentor junior engineers, and work closely with clients to deliver innovative, low-carbon engineering solutions across a diverse range of sectors. The successful candidate will have proven project leadership experience, a strong understanding of UK building services legislation, regulations and industry standards, and technical expertise in HVAC, heating and cooling load calculations, public health design, plantroom design, BMS integration, and sustainable technologies including heat pumps and renewables. Membership with CIBSE (or working towards it), together with progress towards Chartered Engineer status and proficiency in CAD, MagicCAD and BIM software, would be highly advantageous. Benefits Competitive salary ranging from £45,000 to £60,000, dependent on experience. Flexible and hybrid working arrangements to support work-life balance. Private medical insurance for you and your family. Access to a company reward scheme and wellbeing initiatives. Structured career progression opportunities, with clear pathways for advancement. Comprehensive mentoring and support to achieve Chartered Engineer status. Day-to-Day Collaborate with architects, contractors, and other engineering disciplines to deliver coordinated designs. Develop detailed mechanical designs, specifications, and reports. Attend project meetings and provide technical input to ensure project objectives are met. Conduct site visits to monitor progress, resolve issues, and ensure compliance with design specifications. Support the development of innovative, sustainable, and energy-efficient solutions for clients. Mentor and support junior team members, sharing knowledge and expertise. Responsibilities Lead the mechanical design process across all RIBA stages, ensuring high-quality and innovative solutions. Manage projects and coordinate multidisciplinary engineering teams to deliver on time and within budget. Build and maintain strong client relationships, acting as a key point of contact for stakeholders. Oversee quality assurance procedures and ensure compliance with industry standards and regulations. Provide mentorship and technical guidance to junior engineers, fostering their professional growth. Conduct site inspections, support commissioning activities, and perform technical reviews. Qualifications A minimum of 5 years' experience in mechanical building services design. Proven experience in leading projects and managing engineering teams. Membership of CIBSE (or actively working towards membership). Progress towards Chartered Engineer status is highly desirable. Strong technical expertise in: Heating, ventilation, and air conditioning (HVAC) systems. Heating and cooling load calculations. Low-carbon and sustainable design solutions, including heat pumps and renewables. Domestic water services and public health design. BMS integration and controls coordination. Plantroom design and equipment selection. Proficiency in CAD, MagicCAD and BIM software.If you are a motivated and experienced mechanical engineer looking to take the next step in your career, we would love to hear from you. Join a forward-thinking consultancy that values innovation, collaboration, and professional development. Sound interesting? Apply now to take the next step

Role: Gas Safe Engineer and Plumber Location: South Wales Salary: £42,000 - £48,000 (DOE) Hours: Monday Friday 8am 5pm (Full Time Permanent) About the Role Our client is seeking an experienced Gas Safe registered engineer and plumber to join its internal team, delivering domestic refurbishment and insurance reinstatement projects throughout South Wales. This is a varied, hands-on position covering plumbing and heating surveys, general plumbing repairs, fault diagnosis, first-fix and second-fix installations, boiler and central heating work, bathroom and kitchen plumbing, testing, commissioning, minor making-good and other reasonable multi-skilled duties. Projects typically involve occupied and vacant residential properties requiring repair or reinstatement following fire, flood, escape of water or accidental damage. The successful candidate will work across the full project lifecycle, from initial inspection and diagnosis through to installation, certification and handover. The role requires a competent engineer who can undertake gas work only within their current Gas Safe registration categories, while also completing high-quality plumbing and heating works in accordance with the relevant regulations, standards and manufacturers instructions. The successful candidate will also assist the company with obtaining and maintaining Gas Safe business registration and the associated certification and compliance processes. They must therefore be willing and able to be listed as an engineer against the companys registration, subject to Gas Safe Register requirements, and to support the companys assessments, inspections, certification, record-keeping and compliance arrangements. As the position involves regular interaction with homeowners and policyholders, excellent communication skills and a professional, considerate approach are essential. Key Responsibilities Surveys, Diagnosis and Technical Assessment • Attend occupied and vacant residential properties throughout South Wales to undertake plumbing, heating and gas surveys, inspecting existing installations to establish their condition, safety and serviceability, • Diagnose faults affecting boilers, central heating systems, hot and cold-water services, sanitary systems and associated controls, while assessing damage caused by fire, flood, escape of water, accidental damage and other insured events, • Determine whether affected systems and components can be safely retained, repaired or require replacement, identifying any immediate hazards and isolating services where necessary, • Accurately record findings using photographs, measurements, test results, drawings and clear written reports, together with appropriate recommendations for remedial works and safety measures First and Second Fix Plumbing • Undertake first and second fix plumbing installations, including hot and cold-water services, heating pipework, soil and waste systems, sanitaryware, brassware, radiators, valves, appliances and final connections, • Install, alter and pressure-test copper, plastic and other approved pipework systems in accordance with manufacturers instructions and relevant standards, identifying and rectifying leaks or defects before finishes are applied, • Coordinate service routes and installation requirements with project managers, site teams and other trades, protecting completed work and ensuring concealed services are accurately recorded before closing up Heating Systems and Gas Work • Install, replace, service, repair and commission domestic boilers and associated heating systems, including radiators, valves, pumps, controls, thermostats, cylinders and heating pipework, strictly within the engineers current Gas Safe registration categories and demonstrated competence, • Carry out heating system flushing, cleaning, dosing and balancing, together with gas tightness testing, purging, appliance testing and commissioning in accordance with current requirements. Inspect flues, ventilation and combustion arrangements and take appropriate action where unsafe conditions are identified, • Diagnose and rectify faults affecting boilers, heating systems, controls and hot-water systems, completing all required Gas Safe notifications, commissioning records, safety documentation and appliance records Bathrooms, Kitchens and Domestic Refurbishment • Complete plumbing installations, repairs and remedial works in bathrooms, shower rooms, cloakrooms, utility rooms and kitchens, including baths, showers, WCs, basins, sinks, taps, wastes, traps, valves and domestic appliances where within scope, • Set out and install works accurately in accordance with drawings, specifications and manufacturers requirements, coordinating with other trades to achieve a high-quality finish while minimising disruption in occupied properties, • Remove, refit and replace sanitaryware, radiators, sinks, appliances and associated fittings as required for refurbishment and reinstatement works, including careful strip-out of damaged installations General Plumbing and Multi-Skilled Duties • Carry out general plumbing repairs and maintenance, including leak detection, defective valves and taps, toilet faults, wastes, traps and minor pipework alterations, together with draining down, isolation, refilling, venting and recommissioning of domestic water and heating systems, • Undertake associated multi-skilled duties where competent, including minor sealing, fixing, boxing-in preparation and making-good, leaving work areas safe, secure, tidy and ready for subsequent trades, • Measure work areas, identify suitable replacement components and prepare material requirements, supporting other trades with access, service isolation and coordinated reinstatement while recognising when specialist expertise, authorisation or certification is required Testing, Certification and Handover • Test, commission and certify completed installations within the engineers competence and current registration categories, ensuring all works are safe, compliant, fully operational and ready for handover, • Maintain accurate job records, photographs, test results, commissioning sheets, certificates and handover information, clearly demonstrating completed systems and controls to homeowners and policyholders, • Review approved scopes, identify required materials and components, and report any omissions, discrepancies or variations before additional work is undertaken Gas Safe Certification, Business Registration and Compliance Responsibilities • Support the company in obtaining and maintaining Gas Safe business registration, including providing competence evidence, supporting assessments and inspections, and being listed as an engineer where required and accepted by the Gas Safe Register, • Help establish and maintain appropriate procedures for gas safety, supervision, certification, Building Regulations notifications, record keeping and quality control, ensuring gas work is undertaken only within the current competence and registration categories of the relevant engineer, • Assist with gas safety records, commissioning documentation, compliance certificates and customer handover documentation, while supporting the review of gas-related work, addressing any safety concerns or non-conformities, maintaining required records and keeping up to date with relevant regulatory and Gas Safe requirements Essential Qualifications and Experience • Current Gas Safe registration and valid Gas Safe ID card covering the domestic gas work categories required for the role, supported by current ACS qualifications and a recognised plumbing or domestic heating qualification, apprenticeship, NVQ or equivalent, • Proven experience in domestic plumbing and heating, including boiler installation, servicing and repair, fault finding, first and second-fix plumbing, bathroom and kitchen installations, leak detection, sanitaryware, waste systems, testing, commissioning and completion of relevant gas safety and installation documentation, • Strong knowledge of applicable gas safety requirements, Building Regulations and water regulations, with the ability to interpret drawings, specifications and manufacturers instructions, identify unsafe situations and follow appropriate isolation and reporting procedures. A high standard of workmanship, sound diagnostic skills and practical multi-skilled ability are essential, together with a full UK driving licence and willingness to travel throughout South Wales, • Previous experience supporting a Gas Safe registered business, or demonstrable competence and willingness to assist with obtaining and maintaining Gas Safe business registration and associated compliance requirements Desirable Qualifications and Experience • Level 3 Plumbing and Domestic Heating qualification or equivalent, together with an appropriate unvented hot-water qualification and additional LPG, cooker, fire or appliance categories where relevant. Manufacturer training or accreditation for commonly installed boiler and heating products would also be advantageous, • Experience in residential refurbishment, property maintenance or insurance reinstatement, including assessing plumbing and heating systems affected by fire, flood or escape of water. Experience with smart heating controls, system zoning and modern energy-efficient heating systems would be beneficial, • Experience managing domestic projects independently from survey through to completion, including preparing technical reports, scopes, estimates and material schedules. Asbestos awareness training and experience establishing or maintaining Gas Safe business registration and compliance procedures would also be advantageous Skills and Attributes • Excellent plumbing, heating and gas diagnostic ability, with a high standard of workmanship, attention to detail and a strong commitment to gas safety, regulatory compliance and quality, • Professional, customer-focused and considerate approach, with the ability to explain technical findings and system operation clearly to homeowners and other stakeholders, particularly when working in occupied properties, • Highly organised, reliable and adaptable, with the ability to manage multiple appointments, work independently or as part of a multidisciplinary team, understand approved scopes and variations, and undertake reasonable multi-skilled duties within demonstrated competence JBRP1_UKTJ

We are currently recruiting for an experienced Senior / Principal Mechanical Building Services Engineer to join a leading multidisciplinary engineering consultancy on a 12-month contract based in Cardiff or Swansea. This is an excellent opportunity to become part of a collaborative team delivering innovative mechanical building services solutions across a diverse portfolio of projects. You'll work on technically challenging schemes, engage with high-profile clients and contribute to the successful delivery of sustainable engineering solutions across multiple sectors. If you're looking for a role that combines technical leadership, client engagement and project delivery within a flexible working environment, we'd like to hear from you. As a Senior / Principal Mechanical Building Services Engineer, you will take a leading role in the design and delivery of mechanical building services projects from concept through to completion. Working closely with multidisciplinary teams, clients and contractors, you'll provide technical expertise, manage project delivery and mentor junior engineers while ensuring projects are delivered to the highest standards of quality, programme and budget. • Lead the design and delivery of mechanical building services projects., • Produce mechanical specifications, equipment schedules and technical documentation., • Undertake heating, cooling and ventilation calculations using industry-standard software., • Prepare and review detailed engineering calculations and design information., • Manage project delivery from design through to completion., • Attend client, contractor and design team meetings., • Carry out site surveys, inspections and construction progress reviews., • Work collaboratively with multidisciplinary teams and global engineering resources., • Mentor and support the development of junior engineers., • Build strong client relationships and manage stakeholder expectations., • Monitor project budgets and ensure commercial objectives are achieved., • A degree in Building Services Engineering, Mechanical Engineering or a related discipline., • Chartered Engineer status with CIBSE or IMechE, or be actively working towards chartership., • Previous experience within a building services consultancy or contractor design environment., • Strong knowledge of UK mechanical building services design standards and best practice., • Experience using software such as IES, Hevacomp, NBS and Revit., • Excellent communication and stakeholder management skills., • The ability to manage multiple projects and work independently., • A proactive approach with strong leadership and mentoring capabilities., • CIBSE Low Carbon Consultant (LCC) accreditation., • Experience leading multidisciplinary engineering projects., • Commercial awareness and experience managing project budgets #J-18808-Ljbffr

Senior Mechanical Engineer - Building Services Location: Cardiff / Bristol Type: Full-time, Permanent Salary: £45,000 - £60,000 (dependent on experience) Overview An established building services consultancy is seeking an experienced Senior Mechanical Engineer to join its growing team in either Cardiff or Bristol. This is an excellent opportunity for a technically strong engineer with at least five years' experience in mechanical building services design who is looking to lead projects, mentor junior engineers, and work closely with clients to deliver innovative, low-carbon engineering solutions across a diverse range of sectors. The successful candidate will have proven project leadership experience, a strong understanding of UK building services legislation, regulations and industry standards, and technical expertise in HVAC, heating and cooling load calculations, public health design, plantroom design, BMS integration, and sustainable technologies including heat pumps and renewables. Membership with CIBSE (or working towards it), together with progress towards Chartered Engineer status and proficiency in CAD, MagicCAD and BIM software, would be highly advantageous. Benefits Competitive salary ranging from £45,000 to £60,000, dependent on experience. Flexible and hybrid working arrangements to support work-life balance. Private medical insurance for you and your family. Access to a company reward scheme and wellbeing initiatives. Structured career progression opportunities, with clear pathways for advancement. Comprehensive mentoring and support to achieve Chartered Engineer status. Day-to-Day Collaborate with architects, contractors, and other engineering disciplines to deliver coordinated designs. Develop detailed mechanical designs, specifications, and reports. Attend project meetings and provide technical input to ensure project objectives are met. Conduct site visits to monitor progress, resolve issues, and ensure compliance with design specifications. Support the development of innovative, sustainable, and energy-efficient solutions for clients. Mentor and support junior team members, sharing knowledge and expertise. Responsibilities Lead the mechanical design process across all RIBA stages, ensuring high-quality and innovative solutions. Manage projects and coordinate multidisciplinary engineering teams to deliver on time and within budget. Build and maintain strong client relationships, acting as a key point of contact for stakeholders. Oversee quality assurance procedures and ensure compliance with industry standards and regulations. Provide mentorship and technical guidance to junior engineers, fostering their professional growth. Conduct site inspections, support commissioning activities, and perform technical reviews. Qualifications A minimum of 5 years' experience in mechanical building services design. Proven experience in leading projects and managing engineering teams. Membership of CIBSE (or actively working towards membership). Progress towards Chartered Engineer status is highly desirable. Strong technical expertise in: Heating, ventilation, and air conditioning (HVAC) systems. Heating and cooling load calculations. Low-carbon and sustainable design solutions, including heat pumps and renewables. Domestic water services and public health design. BMS integration and controls coordination. Plantroom design and equipment selection. Proficiency in CAD, MagicCAD and BIM software.If you are a motivated and experienced mechanical engineer looking to take the next step in your career, we would love to hear from you. Join a forward-thinking consultancy that values innovation, collaboration, and professional development. Sound interesting? Apply now to take the next step

Heat Pump Engineer - air source and ground source Location: Shropshire (covering West Midlands & Cheshire)Salary: £38,000 – £45,000 per year (negotiable) + overtime We have been instructed by an up and coming renewable energy specialist to find them an experienced Heat Pump Engineer (air source / ground source) to join the core team. Their ambition is to be a significant contributor to the UK’s production of renewable energy and accelerate the transition to a net zero future. The business delivers installation & maintenance across Heat Pumps, Solar PV, Battery Storage, EV Charging, and general electrical services. It is more important to find the “right fit” than necessarily an Engineer with renewables qualifications. The team is small, the ambition is huge and they want this person to learn and grow along with the business - someone that’s excited by renewables and would love to have their contribution recognised and fully appreciated! This is a chance to join a business in its infancy and have a real impact, not only on the business but more importantly the environment. The Heat Pump Engineer’s role; You will be responsible for installations, maintenance and testing across renewable energy system projects. Full training can be given. Key Heat Pump Engineer’s responsibilities; • Install and maintain air source and ground source heat pumps, • Fault finding and repairs Heat Pump Engineer ideal qualifications; • NVQ Level 3 Plumbing & Heating, • Qualification in ground and air source installations, • Manufacturers' heat pump training course, • G3 unvented, • CSCS card, • Full UK driving licence Offered in return; • Annual salary up to £45k for the right candidate (negotiable), • Overtime opportunities, • Ongoing training and development, • The chance to join a business in its infancy and have a real impact, not only on the business but also the environment

Gas Engineer | Cardiff as Local Patch | On Target Earnings Are you a qualified Gas Engineer based in Cardiff or surrounding areas, ready to take your career to the next level? Join Liberty and make a real difference in the communities we serve! We Can Offer You: Uncapped earning potential + company van, fuel card, and excellent benefits Work-Life Balance: 23 days annual leave + bank holidays, plus flexibility with overtime Health & Wellbeing: 24/7 GP access, mental health support, fitness programs, and more Training & Growth: Ongoing professional development to keep you at the top of your game Your Role: Completion of annual gas servicing & minor heating repairs working to health & safety guidelines, safe working practices, operational procedures, gas safety regulations and specifications Must be available for out-of-hours call-outs on a rota basis Provide excellent customer service and maintain high levels of customer satisfaction and safety Report / Complete works using your PDA Report accidents, near-miss events, and potential hazards Be flexible in working with a wide range of customers, adapting to their needs and schedules What We Need from You. ACS qualifications: CCN1, HTR1, CKR1, CENWAT A full UK driving license Flexibility and a positive attitude towards varied work and schedules Excellent customer service skills with experience working with the public A solid understanding of gas legislation and regulations Strong knowledge of Health & Safety practices and working to best standards Ability to manage your time and workload independently Recognised formal qualifications (NVQ Level 2 or equivalent) (desirable) Additional qualifications (LPG, Unvented, Oil, ASHP) (desirable) Why Liberty? We’re a diverse, supportive team with a focus on personal development, wellbeing, and making a real difference in the communities we serve. Liberty offers you a chance to work with the best in the industry and continuously improve your skills while enjoying a rewarding career. Apply Today! Click “Apply” below to join Liberty as a Gas Engineer. We look forward to hearing from you! Closing Date: 29th September 2026 (We may close early due to high demand) Given the nature of this position, you will be required to undergo a Basic Disclosure and Barring Service (DBS) check at offer stage. Applicants with criminal convictions will be assessed individually, and we do not discriminate based on an applicant's criminal record or the details of any disclosed offences. Certain roles may also be subject to additional pre-employment checks. To learn more about the checks included in this process, please click on the following link

Your responsibilities: Reactive works and fault resolution Attend reactive call outs and breakdowns across customer sites Diagnose faults on boilers, heaters and oil-fired heating systems Carry out safe, effective repairs and escalate issues where required Undertake electrical checks and minor

Excellence is not just an expectation, it's our standard.With a driven team of nearly 600 professionals, we are at the forefront of providing stellar asset and energy services across the UK.Our mission is simple yet powerful: to elevate the quality of life in the communities we serve by innovating a

We're looking for two Heating Engineers to join our Property Services Team and help deliver high-quality heating, plumbing, repair and maintenance services across properties owned and managed by Broadacres throughout North Yorkshire.

Sureserve mission is to be the trusted partner of choice to the social housing and related public sector in delivering essential and affordable heating, energy savings, and compliance solutions.

Plumbing & Heating Engineer Westbury. Were recruiting an experienced Plumbing & Heating Engineer to join a thriving business in Westbury.

Senior Commercial Plumbing, Heating & Gas Engineer. Due to continued growth, we’re looking for an experienced Senior Commercial Plumbing, Heating & Gas Engineer to join our team. A strong background in commercial plumbing, heating and gas engineering.

Experienced OFTEC Heating Engineer wanted for a leading heating provider in Worthing/West Sussex, offering a good salary, benefits, and overtime.

Seeking a Service Engineer for a depot-based role in Doncaster, offering a permanent, full-time position with a salary between £37,000 and £45,000, depending on experience.

Seeking an experienced OFTEC Heating Engineer in Worthing, West Sussex for a permanent role with a leading heating provider.

About your role:We need Heating Installation engineers to join our team of experienced Gas Engineers, to ensure that our customers get the help they need, when they need it. Current ACS qualifications (CCN1 and CENWAT) or equivalent in plumbing or heating. You will join a team thats focused on putti

We are recruiting for an experienced Heating/Gas Engineer to join a busy housing maintenance team, carrying out work across residential and corporate properties.

We're looking for two Heating Engineers to join our Property Services Team and help deliver high-quality heating, plumbing, repair and maintenance services across properties owned and managed by Broadacres throughout North Yorkshire.

Experienced HVAC/AirCon Engineer needed for maintenance and repair of air conditioning systems across 100+ retail sites and a central production unit.

Experienced Heating Engineer needed to service and repair domestic heating and hot water systems, ensuring efficiency, safety, and customer satisfaction.

Domestic Heating Engineer specializing in heat pumps for a leading manufacturer of heating systems.

Experienced Heating/Gas Engineer needed for a busy housing maintenance team, working across residential and corporate properties.

Field-based Pump Service Engineer needed for maintenance, installation, and repair of pump systems.

Domestic Heating Engineer specializing in heat pumps for a leading manufacturer of heating systems.

As a Gas Engineer, youll help keep residents homes safe, warm and well maintained while earning £40,937.

Heating Engineer needed for installations, service, and repairs in Hinckley.

We're looking for an experienced Renewable Heating Service & Maintenance Engineer to join our growing Service & Maintenance team in Tonbridge Kent. You'll work across renewable heating systems, carrying out servicing, diagnostics, repairs and commissioning while delivering excellent customer service

Experienced Plumbing & Heating Engineer needed for domestic and commercial installation, maintenance, and commissioning work.

Experienced Plumbing and Heating Engineer (Gas) needed for repairs, servicing, and installations in residential properties.

Were recruiting an experienced Plumbing & Heating Engineer to join a thriving business in Westbury. Plumbing & Heating Engineer Westbury.

Experienced Gas Safe registered engineer needed for a full-time, permanent heating and plumbing role with a family-run company in South Kent.

A Gas Engineer is needed for routine servicing and breakdown response in domestic properties, requiring full domestic gas qualifications and experience in plumbing.

Seeking a Plumbing & Heating Engineer to install, service, maintain, and repair plumbing and heating systems.

Plumbing and Heating Engineer with experience in Air Source Heat Pumps, responsible for installation and repair.

Experienced engineer for renewable heating systems, focusing on service, fault-finding, and repairs, not installation.

Self-Employed Plumbing & Heating Engineers. Were looking to build a reliable network of experiencedself-employed plumbing & heating to carry out domestic work across London and the surrounding west counties. This is an ideal opportunity for engineers who want the freedom of work.

We're looking for two Heating Engineers to join our Property Services Team and help deliver high-quality heating, plumbing, repair and maintenance services across properties owned and managed by Broadacres throughout North Yorkshire.

Heating Engineer needed for installation, maintenance, and servicing of Air Source Heat Pumps in East Anglia.

Seeking a Commercial Plumber/Gas Engineer for installation and maintenance work on commercial and industrial sites.

Christs College has an opportunity for a qualified plumber/heating engineer to join the Colleges maintenance department. As well as being responsible for all the plumbing and heating requirements, the role entails keeping up to date with the on-line fault reporting system, liaising with contract tra

Install and upgrade central heating systems, ensuring excellent customer service and resolving plumbing issues.

Commercial Plumber/Gas Engineer needed for a building services contractor in Peterborough. Role involves installation and maintenance of plumbing, heating, and gas systems, PPM, and client liaison.

Seeking a Level 3 Plumbing & Heating Engineer for a stable, Monday-Friday role in a University Estate. Responsibilities include planned and reactive maintenance of plumbing and heating systems.