Hse jobs in LiverpoolCreate job alerts

A leading manufacturer in the automotive interiors sector is seeking a hands-on Health, Safety, Environmental & Sustainability Manager to lead HSE strategy and compliance at their Liverpool site. This is a key leadership role focused on driving behavioural safety, continuous improvement, and ensuring alignment with internal standards and UK legislation.Key Responsibilities: • Develop and implement site-wide HSE policies and procedures, • Lead behavioural safety initiatives and promote a proactive safety culture, • Coach and support site teams to embed SSOW, • Deliver HSE inductions and training programmes for employees and contractors, • Lead internal audits aligned with ISO14001 and ISO45001 standards, • Track and report audit findings, corrective actions, and improvement plans, • Manage sustainability initiatives and Kaizen processes, • Report on environmental performance and support improvement activities, • Liaise with internal departments, external regulators, and community stakeholders, • Communicate HSE alerts, updates, and good practices across the site, • Previous experience in complex manufacturing environments would be advantageous., • Strong working knowledge of ISO14001, ISO45001, and UK HSE legislation, • Experience with process safety and document control Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Your new companyWe are seeking an experienced Banksman / Traffic Marshal to support contractors for a public sector organisation.This role involves managing vehicle movements and contractor coordination within a public realm environment, making it a varied and sometimes complex position that requires strong communication and safety awareness.Your new role • Acting as an effective liaison between contractors and the day-to-day operation, • Managing the safe movement of vehicles through the public realm into the contractor site compound, • Escorting large vehicles and overseeing deliveries, • Maintaining clear communication between all contractors and staff, • Attending weekly operational meetings, • Collating weekly look-ahead schedules for vehicle movements and deliveries, • CPCS Card (Blue preferred), • Demonstrable awareness of HSE regulations, • Knowledge of standard construction hand signals and procedures, • Strong communication skills and ability to work collaboratively, • Physically fit and highly alert to potential risks Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

An excellent opportunity has arisen for a Maintenance Engineer (Electrically biased) to join a well-established manufacturing business in Speke. This is a days-based position offering long-term stability, flexible working hours, and a varied Electrical workload. An on-call rota operates on a 1-in-5 basis, covering two local sites. A company vehicle is provided while on call for full usage across the week. What You'll Do...Health, Safety & Compliance • Maintain a safe, clean, and compliant working environment, • Ensure all work meets HSE, food safety, environmental, and company standards, • Support risk assessments and safe systems of work, • Maintain engineering areas to a high GMP standardMaintenance & Engineering (Electrical Focus), • Carry out planned preventative maintenance (PPM) on plant and production equipment, • Respond to breakdowns efficiently to minimise downtime, • Diagnose and rectify electrical and mechanical faults, • Work on motors, control systems, conveyors, pneumatics, and production machinery, • Dismantle, repair, and reassemble equipment using hand and power tools, • Inspect components using precision measuring instrumentsFabrication & Technical Skills, • Fabricate and repair components using workshop equipment, • Welding capability desirable but not essential, • Interpret engineering drawings and technical documentationCommunication, Systems & Teamwork, • Log all work via a CMMS system with accurate follow-up, • Communicate faults, progress updates, and repair times clearly, • Participate in root cause analysis (RCA) and improvement projects, • Work effectively both independently and within the engineering teamStock & Continuous Improvement, • Monitor and maintain spares and consumables, • Support parts ordering and verification, • Apprentice-trained engineer or equivalent qualification, • Electrically biased multi-skilled maintenance background, • Strong Health & Safety awareness and LOTO experience, • Experience with CMMS systems and structured fault-finding, • Strong troubleshooting and problem-solving skills, • Comfortable working at height and in confined spaces (training provided), • Competent with Microsoft Office and tablet-based systems, • Flexible approach to working hoursWhat's On Offer..., • Competitive salary and benefits, • Pension scheme, • Life assurance, • 24/7 Employee Assistance Programme, • 31 days annual leave (inclusive of bank holidays, pro rata), • Company health cash plan, • Free onsite parking Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates

Role: -NDT Engineer - PCN Level 2 PAUTLocation: Wirral (site-based), with UK and international travel as requiredWorking Pattern: Full-time, including onshore, offshore, shipyard, and lab site attendance on an ad-hoc basis in line with operational requirements.Salary: - Competitive starting salary plus onshore and onshore day ratesRole OverviewAn exciting opportunity has arisen for a PCN Level 2 PAUT-qualified NDT Engineer to join a growing and forward-thinking NDT operation supporting marine, energy, and industrial sectors.This role is ideal for a commercially aware, entrepreneurial, and proactive engineer who wants more than routine inspection work. Unlike many traditional NDT roles, this position offers variety, responsibility, client exposure, and involvement in developing new opportunities and services.We are seeking a flexible, solutions-focused go-getter who thrives in dynamic environments, enjoys client interaction, and is motivated by helping grow a business while delivering high-quality technical work.The role is primarily based on the Wirral and candidates must live locally or be willing to relocate. Travel at short notice both onshore and offshore, in the UK and internationally is a key requirement.Responsibilities• Carry out PAUT and conventional ultrasonic inspections across marine, offshore, energy, and industrial assets.• Perform inspection campaigns on structural and pressurised systems, both onshore and offshore.• Deliver corrosion mapping and integrity assessment surveys.• Manage assigned projects from mobilisation through reporting and client communication.• Maintain strong technical quality, safety compliance, and reporting standards.• Engage directly with clients to build trusted relationships and secure repeat work.• Identify commercial opportunities and support business development initiatives.• Contribute to specialist investigative and technically complex assignments as the service offering grows.• Maintain accurate documentation, inspection records, and reports to agreed standards and deadlines.The Person and skills required• PCN Level 2 PAUT certification (mandatory).• PCN Level 2 Ultrasonic Testing:oUT 3.1 PlateoUT 3.2 Pipeo(3.8/3.9 advantageous but not essential)• Entrepreneurial and commercially minded• Demonstrable industrial inspection experience in commercial environments.• Experience inspecting welded structures and pressurised systems.• Experience conducting corrosion mapping surveys.• Understanding of degradation mechanisms • Good working knowledge of international codes, standards, and inspection practices.• Strong awareness of HSE requirements and risk assessment processes.• Ability to work independently and manage workload effectively.• Strong communication and client-facing skills.• Proficiency with Microsoft Office and digital reporting tools.• Interested in varied, technically challenging work rather than repetitive assignments• Full right to work in the UK and ability to travel at short notice.What Makes This Role DifferentMany NDT roles involve repetitive site deployment with limited development opportunities. This position offers:• Exposure to varied marine, offshore, and industrial projects.• Direct client engagement and project ownership.• Opportunities to help shape and grow new service offerings.• Development into specialist technical and investigative work.• A team environment that values initiative and commercial awareness.Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

Your new companyThis is an exciting opportunity to join a leading UK-based engineering and logistics organisation that is undergoing significant investment and transformation. With a strong focus on sustainability and innovation, the company is committed to achieving Net Zero operations by 2040. Known for its cutting-edge facilities and forward-thinking approach, the business is expanding its team to support continued growth and operational excellence.Your new roleAs an Electrical Maintenance Technician, you will be part of a dedicated Engineering team responsible for ensuring the smooth operation of heavy plant and equipment. Working Monday to Friday, your role will involve both planned and reactive maintenance activities, as well as modifications to a wide range of industrial machinery.Key responsibilities include: • Performing fault diagnosis and repairs on electrical, mechanical, hydraulic and pneumatic systems., • Prioritising breakdowns in collaboration with operations to minimise downtime., • Supporting project work, quality assurance systems and Health and Safety Initiatives, • Time-served engineer with NVQ Level 3 qualification (or equivalent) in Electrical Engineering., • Proven experience working with heavy plant and equipment in an industrial setting, ideally within quarrying or bulk handling environments., • Strong practical knowledge of conveyor systems, hydraulics, pneumatics, and rotating machinery., • Diagnostic and fault-finding skills using appropriate tools and techniques., • Familiarity with Permit to Work systems and incident reporting procedures., • Desirable: Knowledge of PLCs, drive control systems, HV networks, and CMMS platforms such as SAP., • Understanding of maintenance strategies like RCM, PM, CBM, and TPM., • A competitive salary package of £43,000., • Plenty of overtime is available. On-call rota also with this team, additional payment rates for this., • A company van for commute., • Up to 10% matched contribution pension scheme., • Access to a flexible benefit platform including healthcare cash plans, critical illness insurance, gym memberships, retail discounts, and more., • Opportunities for continuous learning and career development, with over 50,000 hours of training delivered last year. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

As part of our continued growth and commitment to operating responsibly, Palace Chemicals is recruiting for a new Head of Health, Safety & Compliance. This is a key strategic position responsible for leading our health, safety, regulatory and environmental compliance strategy, while managing direct reports and working closely with colleagues across manufacturing, technical and leadership teams. We are looking for a proactive, motivated individual who can drive continuous improvement, continue the journey of our safety culture, and ensure our operations meet the highest standards of regulatory and environmental compliance. 🔎 Key Responsibilities • Lead and develop the company’s Health, Safety & Compliance strategy across our manufacturing operations, • Manage and support direct reports responsible for HSE and regulatory compliance, • Act as the organisation’s appointed competent person for Health & Safety, • Ensure compliance with relevant chemical, environmental and safety regulations including frameworks such as REACH, CLP, GHS and ISO standards, • Oversee regulatory documentation and compliance systems, including Safety Data Sheets (SDS), chemical inventories and regulatory reporting, • Drive environmental and sustainability initiatives, including carbon reduction strategies, • Manage and report Scope 1, Scope 2 and Scope 3 greenhouse gas emissions in support of corporate sustainability goals, • Lead risk assessments, audits and inspections relating to chemical safety, hazardous materials and environmental impact, • Act as the key liaison with regulatory authorities, certification bodies and sustainability organisations, • Develop and implement policies, procedures and training to strengthen safety, compliance and environmental performance, • Monitor emerging legislation and advise leadership on regulatory and best practice changes ✅ What we’re looking for • NEBOSH qualification (or equivalent) in Health & Safety, • Experience acting as an organisation’s competent person for Health & Safety, • Proven experience in Health, Safety, Regulatory or Environmental Compliance within a manufacturing environment, • Strong understanding of chemical regulations and environmental compliance frameworks, • Experience managing direct reports and leading compliance initiatives, • A proactive, solutions-focused mindset with the ability to drive improvements and embed a strong safety culture across the organisation Relevant qualifications in chemistry, environmental science, engineering, regulatory affairs or sustainability would be advantageous, along with experience in sustainability reporting, ISO standards or regulatory frameworks.

QHSE Engineer Location: Liverpool/Den Helder Contract Type: Full-time, Permanent Salary: Competitive Start Date: Immediate/Negotiable Experienced in delivering safety, quality and environmental excellence across projects? If you’re passionate about building HSE systems and ensuring operational safety, then this is the role for you. Key Responsibilities Documentation & Systems • Review client QHSE requirements for each project, • Align and bridge client documentation with internal management systems, • Identify gaps or changes required between systems, • Work closely with Project Engineers developing work procedures., • Attend vessel mobilisations as an independent observer, • Provide an additional QHSE oversight function during mobilisation, • Provide support to the offshore team if required, • Use Topset-style accident investigation principles (formal training not essential), • Around 5+ years’ experience, • Marine/Offshore Experience, • Awareness of Subsea Activities This is a rare opportunity to work with a dynamic and forward-looking company. If this sounds like the perfect role for you, then please drop your CV below or email me at !

HSE Manager A leading manufacturer in the automotive interiors sector is seeking a hands-on Health, Safety, Environmental & Sustainability Manager to lead HSE strategy and compliance at their Liverpool site. This is a key leadership role focused on driving behavioural safety, continuous improvement, and ensuring alignment with internal standards and UK legislation. Key Responsibilities: • Develop and implement site-wide HSE policies and procedures, • Lead behavioural safety initiatives and promote a proactive safety culture, • Coach and support site teams to embed SSOW, • Deliver HSE inductions and training programmes for employees and contractors, • Lead internal audits aligned with ISO14001 and ISO45001 standards, • Track and report audit findings, corrective actions, and improvement plans, • Manage sustainability initiatives and Kaizen processes, • Report on environmental performance and support improvement activities, • Liaise with internal departments, external regulators, and community stakeholders, • Communicate HSE alerts, updates, and good practices across the site, • Previous experience in complex manufacturing environments would be advantageous., • Strong working knowledge of ISO14001, ISO45001, and UK HSE legislation, • Experience with process safety and document control

🔬 Hiring: Mobile Chemist | East Midlands (Leicester / Liverpool) | Salary + Benefits 📍 Location: East Midlands (Leicester / Liverpool) 🕒 Hours: Monday – Friday, 40 hours per week SRG are partnering with a leading waste management and recycling company with a strong reputation for supporting the UK chemical industry. Due to continued growth, they are looking to hire a Mobile Chemist to join their team on a permanent basis. This is a fantastic opportunity for a chemist with industry experience—especially within the waste sector—who enjoys a hands-on, site-based role and working closely with customers. 🧪 Key Responsibilities: • Provide technical support to customers on chemical waste handling and disposal, • Advise on safe packaging, storage, and transportation of hazardous materials, • Conduct site-based risk assessments and ensure compliance with HSE regulations, • Perform waste classification, segregation, and support recycling initiatives, • Carry out liquid transfer and waste handling activities on-site ✅ Requirements: • Degree (HNC/HND/BSc) in Chemistry or Chemical Engineering, • Minimum 1+ year of industry experience (waste experience preferred), • Strong knowledge of wet chemistry and analytical techniques, • Good understanding of COSHH, SDS, and health & safety practices, • Full clean UK driving licence (essential), • Full right to work in the UK (no sponsorship available) 💡 What’s on Offer: • Competitive salary, • Annual bonus + pension contributions, • Ongoing training, development & career progression, • Access to flexible benefits portal

Walker Sime is a leading UK construction consultancy, established in Manchester in 1999. Known for technical excellence and commercial integrity, we deliver specialist cost management and project support services across major infrastructure, energy, and regeneration programmes. We are seeking a Project Coordinator to join our team supporting a major power and energy client. Based onsite near Wirral, you’ll be part of a high-performing team delivering complex infrastructure projects within a regulated utilities environment. This is an excellent opportunity for someone looking to develop their career in project management, gaining exposure to large-scale programmes, structured delivery frameworks, and NEC contracts. What You’ll Be Doing • Supporting the planning, coordination, and delivery of project workstreams, • Assisting with NEC contract administration (including early warnings, compensation events, and documentation), • Supporting cost control, forecasting, and risk management activities, • Coordinating with internal teams, contractors, and key stakeholders, • Assisting with project governance, reporting, and programme controls, • Producing regular progress reports and presentations, • Ensuring compliance with client standards, processes, and HSE requirements, • Helping to resolve project issues and support smooth project delivery Essential: • Experience within energy, utilities, infrastructure, or engineering environments, • Understanding of NEC contracts (NEC3/NEC4) or willingness to develop knowledge, • Strong organisational and coordination skills with the ability to manage multiple priorities, • Commercial awareness and exposure to project financials or cost reporting, • Confident communicator, able to engage with stakeholders at all levels, • Proficient in MS Office and reporting tools Qualifications • Degree in Project Management, Engineering, Construction, Commercial Management, or similar (desirable), • Professional accreditation (APM, PMI, RICS) beneficial but not essential

Position: Senior Waste and Radiation Protection Specialist Location: Milton Park Business Park, Oxfordshire Arrangement: Permanent Work Arrangement: Flexible working between a NUVIA office, home and site. NUVIA UK’s Land Remediation and Characterisation (LR&C) department draws on the strong foundations of NUVIA's metrology and Health Physics heritage, with industry recognised specialists having expertise and experience spanning many decades both within the UK and Internationally. The senior waste and radiation protection specialist will play a key role in providing radiation protection advice and training to support a range of operational projects, such as site investigations, land remediation, drain surveys and waste assay campaigns. In addition, they will provide radioactive waste support in terms of Waste Management Plans, Best Available Technique (BAT) Assessments and Sample and Analysis Plans. The Role As a Senior Waste and Radiation Protection Specialist, your role will include: • Provision of radiation protection advice that will ensure working practices meet the requirements of current Legislation and best practice., • Evaluate the operational environment and the radiological requirements to provide Radiation Risk Assessments (RRA) for the work in hand., • Advise teams on operational styles that should be adopted to maintain a safe working environment and provide training, as appropriate., • Co-ordinate the production of radiological protection documentation such as Normal Operational Dose Uptake Assessments, Radiological Zoning, Radiological Risk Assessments, ALARP Assessments, Operating Instructions and compliance statements., • Develop and maintain knowledge of the characterisation and land quality core services and capabilities., • Engage with regulatory authorities to support Permit applications, transfers and variations., • Provide guidance, advise and training to customers regarding HSE notifications and registration, typically required for land remediation contracts on historic sites, i.e., thorium and radium contamination., • Provide transport RRA’s for radioactive waste and source transfers, • Write technical reports and support characterisation assessments and desk studies., • Attend industry events, conferences, and trade shows as required. Profile Qualifications and Experience To be considered for the Senior Waste and Radiation Protection Specialist role, we are seeking a highly motivated individual, possessing strong communication and interpersonal skills. The following criteria will also be considered: • RPA2000 Certified Radiation Protection Adviser is essential, • Demonstrable experience as a qualified Radiation Protection Adviser (RPA) in operational environments., • Experienced in the technical aspects of waste management and land remediation, including regulatory requirements, and working towards or qualified as a Radioactive Waste Adviser (RWA) would be advantageous., • Experienced in collaborative delivery, working closely with clients, regulators and stakeholders., • Must be able to achieve and maintain Security Clearance (SC) for this role., • A bachelor’s degree in a science related field would be beneficial., • Ability and willingness to acquire job related knowledge through self-development and learning from others, • Must have a full driving licence and be available to visit customer sites, as required. Why join the LR&C team? We like to think of the LR&C team as an intrapreneurial unit, i.e., a start-up initiative delivered within the confines and security of a successful and established nuclear, engineering company. We believe that land remediation is not just about removing contamination, it is about restoring confidence, protecting the environment and enabling the safe reuse of land for future generations. Our LR&C services combine decades of experience, proprietary technologies, and a deep understanding of regulatory frameworks to deliver safe, efficient and sustainable solutions. Since the late 1990s, we’ve been developing and refining in-situ radiological measurement technologies to support land remediation and decommissioning. Our systems are designed to optimise segregation at source, reduce waste volumes and enable the use of lower-impact waste management options. From legacy nuclear facilities to former industrial sites, we provide the tools, expertise and data to enable confident decision-making. We offer a complete range of services, including radiological surveying and mapping of land, buildings, pipelines and boreholes; classification and segregation of excavated materials; sampling and fingerprinting of radionuclides; and real-time data management to track waste from generation to disposal. Our team also supports clients with environmental permitting, regulatory compliance, and the development of waste management strategies tailored to each site’s needs. Whether it’s supporting clearance, delicensing, or redevelopment, we deliver practical, auditable solutions that meet the highest standards of safety and environmental stewardship. Why us? Employee Staff Benefits: • Hybrid and agile working policies, • 8.5% Pension Contribution & Life Assurance, • Private Medical Scheme*, • Employee Share Scheme, • Salary Sacrifice Schemes: Electrical Vehicles, Technology and Cycle to Work, • 25 days holiday (increasing to 28 days after 5 years’ service, 31 days after 10 years’ service), • Option to buy, sell and carry over up to 5 days annual leave per year, • 18 Weeks Full Maternity Pay* (+21w SMP), • In partnership with trade unions, • Personal Development & Further Education Support, • Long Service & Recognition Awards NUVIA UK - a subsidiary of VINCI construction - is an international company that operates across highly regulated sectors including Civil Nuclear and has a strong presence and history of delivery at nuclear sites in the UK and internationally. NUVIA UK is a performance-driven company that is committed to the development of its people within a culture of safety, innovation, and excellence. NUVIA UK is committed towards equality in employment.

Company: Fast paced, high risk production company who specializes in supporting the food and agricultural industry \nJob title: HSE Manager - Multisite\nSalary: £80,000 per annum, depending on experience + package which includes bonus and car allowance.\nLocation: Hybrid, 2-3 days in the office, then traveling across to sites. The base site in either Liverpool (L5) or Hull (HU9)\n \nA rare opportunity for a HSE Manager to have a positive impact across a highly automated, global business with a small headcount who are very experienced. This company prides itself on being people first and seeking an engaging and collaborative professional to sit within the management team and evolve their safety behaviors and culture, driving changes and improvements across the whole business. \n \nSites; multiple small production sites in total 4 of which are in the UK and the others are spread across Europe Africa and Asia.\n \nMain Duties: \n\nHSE Program Management: Maintain and improve comprehensive HSE programs and policies tailored to bulk liquid storage and blending operations.\nRegulatory Compliance: Ensure compliance with all local, national, and international health, safety, and environmental regulations, as well as company standards and policies. This includes maintaining ISO14001 certifications across UK and Ireland and leading environmental sustainability.\nRisk Assessment: Conduct regular risk assessments and job hazard analyses to identify potential hazards and implement appropriate control measures.\nTraining: Develop and deliver HSE training programs for employees, contractors, and subcontractors to ensure all personnel are knowledgeable about safety protocols and procedures.\nInspections and Audits: Conduct regular site inspections and annual audits to monitor compliance with HSE standards, identify areas for improvement, and implement corrective actions.\nIncident Investigation: Lead investigations into safety-related incidents and accidents, determine root causes, and recommend corrective actions to prevent recurrence.\nEmergency Response: Maintain emergency response plans, conduct drills, and ensure readiness to handle potential emergencies effectively.\nContinuous Improvement: Promote a culture of continuous improvement in HSE practices, staying abreast of industry best practices and technological advancements.\nOperate as part of the UK Business Management Team. \n \nIdeal qualifications and background;\n\nPrior experience managing multiple sites, still able to make an impact on the sites remotely when not visiting.\nChemical / FMCG Manufacturing experience or experience with Bulk liquid storage / feed production/ agriculture/ packaging/ oil depots, petro chemical \n5 years minimum years of HSE experience, ensuring alignment with UK and EU HSE regulations and standards.\nSelf motivated and proactive professional who can work collaboratively with people (individual influencer) working with senior management.\nTo provide a structured approach, detailed reporting and audits.\nNEBOSH General Certificate ideally NEBOSH Diploma or equivalent.\nCOMAH experience is an advantage\nTraining experience is ideal, being hands on, on site and not sat behind a screen. \nPersonality and team culture fit;\n\nHands on, autonomous and pragmatic person\nVisible, approachable and supportive \nAble to gain buy in, build trusted relationships, through engagement and able to influence others (both shopfloor and management) \nA true business partner and positive coach/mentor for the workforce \nInterested? To apply or for more information; please reach out to me directly on (url removed)

Your new company \nWe are seeking an experienced Banksman / Traffic Marshal to support contractors for a public sector organisation.\nThis role involves managing vehicle movements and contractor coordination within a public realm environment, making it a varied and sometimes complex position that requires strong communication and safety awareness.\nYour new role \n\nActing as an effective liaison between contractors and the day‑to‑day operation\nManaging the safe movement of vehicles through the public realm into the contractor site compound\nEscorting large vehicles and overseeing deliveries\nMaintaining clear communication between all contractors and staff\nAttending weekly operational meetings\nCollating weekly look‑ahead schedules for vehicle movements and deliveries\nImplementing and maintaining a safe system of transport across the public realm for all vehiclesWhat you'll need to succeed \n\nCPCS Card (Blue preferred)\nDemonstrable awareness of HSE regulations\nKnowledge of standard construction hand signals and procedures\nStrong communication skills and ability to work collaboratively\nPhysically fit and highly alert to potential risks\nExperience working within public-facing / public realm environments desirableWhat you'll get in return \nThis is a 6 month contract with the opportunity for further work with a well-established contractor.\nWhat you need to do now \nIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.\nIf this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.\n\nHays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

A leading manufacturer in the automotive interiors sector is seeking a hands-on Health, Safety, Environmental & Sustainability Manager to lead HSE strategy and compliance at their Liverpool site. This is a key leadership role focused on driving behavioural safety, continuous improvement, and ensuring alignment with internal standards and UK legislation.\nKey Responsibilities:\n\nDevelop and implement site-wide HSE policies and procedures\nLead behavioural safety initiatives and promote a proactive safety culture\nCoach and support site teams to embed SSOW\nDeliver HSE inductions and training programmes for employees and contractors\nLead internal audits aligned with ISO14001 and ISO45001 standards\nTrack and report audit findings, corrective actions, and improvement plans\nManage sustainability initiatives and Kaizen processes\nReport on environmental performance and support improvement activities\nLiaise with internal departments, external regulators, and community stakeholders\nCommunicate HSE alerts, updates, and good practices across the site\nRepresent the site in group-level HSE meetings and reviews\nWhat you'll need\n\nPrevious experience in complex manufacturing environments would be advantageous.\nStrong working knowledge of ISO14001, ISO45001, and UK HSE legislation\nExperience with process safety and document control\nExcellent communication, coaching, and influencing skills\nWhat's in it for you?\nA salary of £60k + Car allowance is available for the role, alongside a discretionary bonus and an opportunity to work with an experienced and diverse team underneath an expert Health & Safety Director in the industry.\n\nHays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Your new company \nThis is an exciting opportunity to join a leading UK-based engineering and logistics organisation that is undergoing significant investment and transformation. With a strong focus on sustainability and innovation, the company is committed to achieving Net Zero operations by 2040. Known for its cutting-edge facilities and forward-thinking approach, the business is expanding its team to support continued growth and operational excellence.Your new role \nAs an Electrical Maintenance Technician, you will be part of a dedicated Engineering team responsible for ensuring the smooth operation of heavy plant and equipment. Working Monday to Friday, your role will involve both planned and reactive maintenance activities, as well as modifications to a wide range of industrial machinery.\nKey responsibilities include:\n\nPerforming fault diagnosis and repairs on electrical, mechanical, hydraulic and pneumatic systems.\nPrioritising breakdowns in collaboration with operations to minimise downtime.\nSupporting project work, quality assurance systems and Health and Safety Initiatives\nEnsuring all work is documented and compliant with internal policies and HSE regulationsWhat you'll need to succeed \nTo be successful in this role, you will need:\n\nTime-served engineer with NVQ Level 3 qualification (or equivalent) in Electrical Engineering.\nProven experience working with heavy plant and equipment in an industrial setting, ideally within quarrying or bulk handling environments. \nStrong practical knowledge of conveyor systems, hydraulics, pneumatics, and rotating machinery.\nDiagnostic and fault-finding skills using appropriate tools and techniques.\nFamiliarity with Permit to Work systems and incident reporting procedures. \nDesirable: Knowledge of PLCs, drive control systems, HV networks, and CMMS platforms such as SAP.\nUnderstanding of maintenance strategies like RCM, PM, CBM, and TPM.\nA full, valid UK driving licence.\n\nWhat you'll get in return \n\nA competitive salary package of £43,000. \nPlenty of overtime is available. On-call rota also with this team, additional payment rates for this. \nA company van for commute. \nUp to 10% matched contribution pension scheme. \nAccess to a flexible benefit platform including healthcare cash plans, critical illness insurance, gym memberships, retail discounts, and more. \nOpportunities for continuous learning and career development, with over 50,000 hours of training delivered last year. \nSupport for physical and mental wellbeing through an Employee Assistance Programme.\nWhat you need to do now \nIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.\nIf this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.\n\nHays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

An automotive component manufacturer with sites across Europe requires a HSE Officer to promote a “safety first” culture within the plant. The ideal candidate will hold a NEBOSH qualification and have experience a fast paced manufacturing environment. \n\nCommutable from: Liverpool, Chester, Warrington, Halewood, Speke, Birkenhead, Wrexham\n\nSalary: £38,000 - £46,000 p.a. \n\nSuitable for: HSE Assistant, HSES Assistant, HSE Officer, HSES Officer, Health & Safety Officer \n\nThe Role \n\nReporting in to the HSE Manager you will have the following duties: \n\n- Keep up to date with HSE legislation and ensure compliance\n\n- Meet safety KPIs and performance targets\n\n- Manage potential incidents and promote a proactive safety culture\n\n- Maintain and review risk assessments regularly\n\n- Oversee chemical register, COSHH, and safety data sheets\n\n- Support departments with HSE assessments (PUWER, REBA, PCA)\n\n- Monitor safety equipment (eye wash stations, spill kits, first aid areas)\n\n- Prepare HSE reports and dashboards\n\n- Identify hazards and implement corrective actions\n\n- Manage hazardous materials and coordinate safe removal\n\n- Deliver safety training and inductions\n\n- Ensure accurate HSE records and legal compliance\n\n- Conduct audits and inspections\n\nThe Person \n\nEducated in a NEBOSH qualification you will have the following experience: \n\n- Experience in a Health & Safety role (ideally in fast-paced environments)\n\n- Strong organisation, communication, and ability to prioritise under pressure\n\n- Flexible, adaptable, and able to work independently or in a team\n\n- Proactive with a willingness to learn\n\n- Strong interpersonal skills and integrity\n\n- Able to collaborate across teams and functions\n\n- Capable of managing multiple tasks simultaneously\n\nTo apply for this opportunity please click to apply or contact Greg Kneuss at the Ethero office in Telford for further details

An automotive component manufacturer who going through positive changes require an additional HSE Manager to provide environmental health and safety guidance throughout the business units. The ideal candidate will have worked in a large automotive manufacturing environment with perfect knowledge of ISO14001 and 45001.\nCommutable from: Liverpool, Halewood, Chester, Birkenhead, St Helens, Warrington, Runcorn, Knowsley\nPackage: £60,000 – £70,000 p.a. +Car allowance + 6/8% match Pension +Family Bupa\nSuitable for: Health & Safety Manager, H&S Manager, Health, Safety & Environmental Manager\nThe Role\nReporting into the HSE Director you will have the following duties:\n- Participate in the process of control and responsibility for the Health and Safety budget.\n- Prepare and present to the board the Health & Safety at work.\n- Participate in the commissioning of newly constructed buildings.\n- Work with the plant EHS Coordinators to ensure compliance and the implementation of good manufacturing processes.\nThe Person\nEducated to the equivalent of degree level in a Health & Safety discipline you will have the following experience:\n- Extensive experience in the automotive manufacturing industry.\n- Excellent knowledge of IS(phone number removed) and 45001 with knowledge of IATF16949.\n- It’s essential you’re a multitasker with strong IT Office skills.\nTo apply for this opportunity please click to apply or contact the Evergreen office in Telford for further details

Due to an increase in workload within their Civil Engineering division, our client are looking for a Health & Safety Advisor to support works in Liverpool that include Roads, Tunnel Refurbishments, Bus Station Infrastructure, Paving Upgrades and M&E works in Tunnels.\n\nDaily duties will include the below:\n\n * Monitor and ensure the regulatory compliance of investment programme related activities and undertakings.\n\n * Identify compliance gaps and opportunities for continuous improvement and support the development of HSE improvement plans.\n\n * Provide support and guidance to officers and managers as required to address compliance gaps.\n\n * Ensure suitable arrangements are implemented at project level to achieve HSE compliance during project delivery in accordance with the project control framework (PCF).\n\n * Review project specific HSE documentation produced internally and by contractors to ensure relevant legislation, guidance, etc are identified with suitable arrangements for compliance.\n\n * Carry out regular site audits and inspections to check control measures are in place and effective. Produce reports with recommendations and track progress with actions.\n\nTo be considered you will hold NEBOSH and IOSH and have Civil Engineering/Infrastructure experience gained with reputable Contractors.\n\nIn return, a top day rate is on offer which is Outside IR35 and comes with an immediate start and minimum 6 months contract which is highly likely to be extended.\n\nThis is an urgent and top opportunity with a great client so if interested, please send a copy of your CV to Dave Rowe by email or call Dave on (phone number removed) for further information

Asbestos Surveyor - Liverpool\n\nLocation: Liverpool, Merseyside\nSalary: £36,000 - £38,000 (depending on experience)\nContract: Permanent | Full-time\n\nA well-established UKAS-accredited asbestos consultancy is looking to appoint an experienced Asbestos Surveyor to support a busy and growing workload across Liverpool and the wider North West region. This is an excellent opportunity for a surveyor seeking a stable role with strong earning potential and a structured, well-managed workload.\n\nThis position is focused purely on surveying, offering a consistent pipeline of work across commercial, industrial, and public sector properties.\n\nWhat You'll Be Joining\nYou'll be joining a respected consultancy known for delivering high-quality asbestos services. The company promotes a supportive working environment, realistic workloads, and ongoing investment in staff development.\n\nSalary & Benefits\n£36,000 - £38,000 salary (DOE)\n\nCompany vehicle or car allowance\n\n22-25 days annual leave + bank holidays\n\nCompany pension scheme\n\nOngoing training and development\n\nOvertime opportunities available\n\nStable, long-term workload\n\nSupportive management team\n\nThe Role\nCarrying out Management, Refurbishment & Demolition (R&D) asbestos surveys in line with HSG264\n\nConducting bulk sampling and ensuring correct procedures are followed\n\nProducing accurate, compliant survey reports\n\nWorking across commercial, industrial, and public sector properties\n\nEnsuring all work complies with HSE guidance and current legislation\n\nManaging workload independently across multiple sites\n\nAbout You\nBOHS P402 (essential)\n\nExperience working as an Asbestos Surveyor\n\nStrong understanding of HSG264 and asbestos legislation\n\nAbility to manage workload independently\n\nFull UK driving licence\n\nProfessional, organised, and reliable\n\nWhy This Role\nCompetitive salary for a survey-focused role\n\nStructured, well-managed workload\n\nStrong benefits package\n\nLong-term stability within a growing consultancy\n\nSupportive and professional working environment\n\nFor further information or to apply, contact Aidan Morgan or send your CV to\n for immediate consideration

A fantastic opportunity has arisen for a Qualified Gas Engineer to join an ever growing company on a sub-contracting basis working with Prestige skills & our clients.\n\nDue to the expansion we are giving the right candidates the chance to join our professional and dynamic team.\n\nAll applicants must be experienced & qualified gas engineers with CCN1/CMA1 and MET1 Qualifications\n\nAll applicants must have their own van and tools.\n\nSkills\n\n·Experience in a similar role\n\n·Must be a team player\n\n·Have a good work ethic\n\n·Fantastic customer service skills\n\nAbout the Role\n\nThe role will be, working as a metering engineer attending faulty gas meters which would need exchanging, installing or repairing. You will be expected to carry out a number of tasks which include visual inspections of gas appliances, standing and working pressure checks and, alteration of meter locations. The role is fully customer focused, carrying out essential works driven by the HSE.\n\nIf you would like to be considered for this Role, please apply here and a member of the Recruitment team will be in touch.\n\nmeter, gas, metering, engineering, sub-contracting, self-employed, smart, dual fuel

4-5Month Contract working in the Filling team. 4 on 4 off shift pattern days and nights.\nBased in Speke in Liverpool.\n\nWorking under the Team Leader, the Process Technician is responsible for executing the manufacturing processes in the Aseptic Filling department in accordance with written procedures.\n\nThe role holder will provide (be trained in) the technical skill sets necessary to manufacture high quality vaccines in a compliant, efficient and cost-effective manner.\n\nResponsibilities\n\nCarries out all sterile filling process operations using local SOPs and batch documentation whilst in full compliance with cGMP to meet production schedule demands.\n\nTo work in a safe manner in compliance with all pertinent UK legislation, Seqirus mandatory policies, guidelines and site procedures for Health, Safety and Environment.\n\nWhen manufacturing ensure that all Departmental SOPs and MIs are followed and:\n\n* Ensure appropriate control, monitoring and delivery of activities in their area of work.\n* Ensure that all documentation is completed correctly, accurately in a timely manner and signed by the relevant personnel.\n* Carry out final documentation review and sign off to ensure documentation is right first time.\n* Ensure compliance to Health and Safety regulations. Consistently demonstrating the behaviours necessary to create a safe working environment for themselves and their colleagues.\n\nTo actively maintain and promote a cGMP compliant culture, ensure that the highest standards of housekeeping and safety are applied within the area in accordance with the Orange Guide and CFR regulations and to apply the principles of Lean Manufacturing, Problem Solving, 5S ,Waste Elimination and Energy Efficient Activities in support of Continuous Improvement.\n\nTo maximise their individual contribution so that team objectives are achieved. To work as a team member, providing and receiving feedback to team members and their team leader. To communicate and liaise with members of other teams in order to meet the business's objectives. When required, to flexibly support other departments - providing adequate training is received and it is safe to do so.\n\nAttend all compulsory and allocated training courses required for the role. Ensure that all training is completed in a timely manner and that personal training records are kept up to date. To continue to develop new skills, competencies and behaviours to fulfil both current and future business needs. The role holder will be able to demonstrate the application of the skills required for their role.\n\nTo contribute ideas and action in order to improve team, process and equipment performance. To support process improvement and uphold Seqirus Values and Behaviours.\n\nSupport organisation change and process improvements.\n\nAseptic Filling - Specific Tasks Include:\n\n* Movement of materials using pallet trucks (manual and electric) to ensure manufacturing operations are efficient and production demands are met.\n* Cleaning and disinfection of production rooms and equipment to maintain cleanroom, cGMP and HSE standards.\n* Cleaning, preparation, sterilisation, assembly and disassembly of production equipment\n* Performance of In Process Control checks and Environmental Monitoring to ensure the isolator environment is maintained and products are made within specification.\n* Operation of the Filling production line including use of machine interfaces, performing VHP/CIP/SIP cycles, monitoring the batch and performing interventions\n\nKnowledge, Skills & Competencies\n\nFilling of sterile products / Aseptically qualified (e.g. sterile connections, sterility assurance) / Use of Isolator technology.\n\nAttention to detail and high personal concern for standards, integrity, communication, and discretion.\n\nProven knowledge of cGMP.\n\nBasic mechanical aptitude or knowledge of electronic/mechanical equipment\n\nCompetent in using multiple computer systems e.g. PCS, GLIMS, SAP and production line machine interfaces\n\nEducation Requirements\nRelevant degree qualification preferred\n\nExperience Requirements\n1+ years' experience and competence in cGMP and sterile product production operations in the Biotech or Pharma industry preferred\n\nAdecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer.\n\nBy applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser

5 Month Contract working in the Filling team. 4 on 4 off shift pattern days and nights.\nBased in Speke in Liverpool. Graduate Opportunity for a Science Graduate \n\nWorking under the Team Leader, the Process Technician is responsible for executing the manufacturing processes in the Aseptic Filling department in accordance with written procedures.\n\nThe role holder will provide (be trained in) the technical skill sets necessary to manufacture high quality vaccines in a compliant, efficient and cost-effective manner.\n\nResponsibilities\n\nCarries out all sterile filling process operations using local SOPs and batch documentation whilst in full compliance with cGMP to meet production schedule demands.\n\nTo work in a safe manner in compliance with all pertinent UK legislation, Seqirus mandatory policies, guidelines and site procedures for Health, Safety and Environment.\n\nWhen manufacturing ensure that all Departmental SOPs and MIs are followed and:\n\n* Ensure appropriate control, monitoring and delivery of activities in their area of work.\n* Ensure that all documentation is completed correctly, accurately in a timely manner and signed by the relevant personnel.\n* Carry out final documentation review and sign off to ensure documentation is right first time.\n* Ensure compliance to Health and Safety regulations. Consistently demonstrating the behaviours necessary to create a safe working environment for themselves and their colleagues.\n\nTo actively maintain and promote a cGMP compliant culture, ensure that the highest standards of housekeeping and safety are applied within the area in accordance with the Orange Guide and CFR regulations and to apply the principles of Lean Manufacturing, Problem Solving, 5S ,Waste Elimination and Energy Efficient Activities in support of Continuous Improvement.\n\nTo maximise their individual contribution so that team objectives are achieved. To work as a team member, providing and receiving feedback to team members and their team leader. To communicate and liaise with members of other teams in order to meet the business's objectives. When required, to flexibly support other departments - providing adequate training is received and it is safe to do so.\n\nAttend all compulsory and allocated training courses required for the role. Ensure that all training is completed in a timely manner and that personal training records are kept up to date. To continue to develop new skills, competencies and behaviours to fulfil both current and future business needs. The role holder will be able to demonstrate the application of the skills required for their role.\n\nTo contribute ideas and action in order to improve team, process and equipment performance. To support process improvement and uphold Seqirus Values and Behaviours.\n\nSupport organisation change and process improvements.\n\nAseptic Filling - Specific Tasks Include:\n\n* Movement of materials using pallet trucks (manual and electric) to ensure manufacturing operations are efficient and production demands are met.\n* Cleaning and disinfection of production rooms and equipment to maintain cleanroom, cGMP and HSE standards.\n* Cleaning, preparation, sterilisation, assembly and disassembly of production equipment\n* Performance of In Process Control checks and Environmental Monitoring to ensure the isolator environment is maintained and products are made within specification.\n* Operation of the Filling production line including use of machine interfaces, performing VHP/CIP/SIP cycles, monitoring the batch and performing interventions\n\nKnowledge, Skills & Competencies\n\nFilling of sterile products / Aseptically qualified (e.g. sterile connections, sterility assurance) / Use of Isolator technology.\n\nAttention to detail and high personal concern for standards, integrity, communication, and discretion.\n\nProven knowledge of cGMP.\n\nBasic mechanical aptitude or knowledge of electronic/mechanical equipment\n\nCompetent in using multiple computer systems e.g. PCS, GLIMS, SAP and production line machine interfaces\n\nEducation Requirements\nRelevant degree qualification preferred\n\nExperience Requirements\n1+ years' experience and competence in cGMP and sterile product production operations in the Biotech or Pharma industry preferred\n\nAdecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer.\n\nBy applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser

Assistant Site Manager - Waste Management \n\n£40,000+\nFull Time | Permanent\nMerseyside\n\nAre you an experienced waste management professional looking to step into a leadership role within a fast-paced hazardous waste environment? Do you thrive in operational settings where compliance, organisation, and teamwork are critical to success? If so, this could be the ideal opportunity for you.\n\nA leading hazardous waste and environmental services provider is seeking an Assistant Site Manager to support the day-to-day running of a busy waste treatment and transfer facility in Merseyside. Working closely with the Site Manager, you will help oversee site operations, ensure permit compliance, and support the safe and efficient management of hazardous and non-hazardous waste streams.\n\nThis is a hands-on operational role offering excellent exposure to site leadership, compliance management, and team coordination within a growing and sustainability-focused organisation.\n\nKey Responsibilities:\n\nSupporting the efficient running of daily activities across the waste management facility.\nEnsuring all site activities operate in line with environmental permits and waste verification procedures.\nWorking alongside technical and site-based teams to ensure operational processes run effectively.\nOverseeing site inventory levels to ensure storage capacities remain compliant with permit conditions.\nMaintaining high standards of health, safety, and waste segregation practices across operations.\nHelping manage staff onboarding, training schedules, and competency tracking.\nStepping in to support site leadership responsibilities during periods of absence or leave.\n\nWhat You’ll Need:\n\nBackground within hazardous waste, industrial services, environmental operations, or chemical processing environments.\nSound knowledge of environmental compliance standards, permitting requirements, and HSE regulations.\nExperience supporting operational teams within a busy industrial or processing setting.\nConfidence in managing priorities and responding effectively within a dynamic environment.\nGood analytical and problem-solving skills with close attention to operational detail.\n\nWhat’s on Offer:\n\nPrivate medical insurance\nPrivate dental insurance\nCompany pension\nHealth & wellbeing programme\nFree onsite parking

Key Responsibilities • Perform routine inspections and basic maintenance tasks across the converter station, • Carry out general “odd jobs” including minor repairs, housekeeping, and equipment checks, • Assist with planned and reactive maintenance activities as directed by the offshore team, • Monitor equipment and systems, reporting abnormalities or faults promptly, • Support logistics operations, including handling deliveries, tools, and materials, • Maintain cleanliness and organisation of work areas, workshops, and accommodation spaces, • Assist other departments (electrical, mechanical, HSE) as required during night operations, • Ensure compliance with all health, safety, and environmental procedures, • Participate in emergency response duties as part of the offshore team Skills & Experience • Previous offshore experience (wind, oil & gas, or marine) preferred, • Practical, hands-on approach with basic mechanical or electrical awareness, • Ability to work independently with minimal supervision during night shifts, • Strong problem-solving skills and willingness to take on varied tasks, • Good communication and teamwork skills, • Comfortable working in a remote offshore environment Qualifications • Offshore certifications – GWOs with Enhanced first aid, medical, chester step, HUET + CA EBS, Slinger, and signals, • Relevant technical or trade background (desirable but not essential), • Crane operator (desirable but not essential), • Personal Attributes, • Flexible and proactive attitude, • High level of reliability and self-discipline, • Safety-conscious mindset, • Able to adapt to changing priorities and unexpected tasks

The Company: OXBO are partnered with a fast-growing UK IPP delivering utility-scale Battery Energy Storage System (BESS) projects across the UK. As part of their continued growth, they’re looking for a Quality Inspector. As Quality Inspector, you’ll be responsible for leading projects from kick-off through to O&M handover, ensuring the highest standards are maintained across safety, quality, and compliance. The Benefits: • Competitive Salary + Annual bonus scheme., • Car allowance., • Remote working, with site visits as required., • Fast-growing IPP with real projects, and a hands of management style. What you will be doing: • Lead Quality and HSE from Client’s perspective across multiple battery energy storage (BESS) projects., • Ensure all incidents and cases are recorded, tracked, and resolved effectively., • Monitor contractor and subcontractor compliance with Quality and HSE standards., • Support delivery teams in meeting safety, quality, cost, time, and risk objectives., • Conduct site visits, audits, and stakeholder engagement activities., • Oversee commissioning quality processes (FAT/SAT/SIT) and non-conformance tracking., • Produce reports for senior leadership and board-level review., • Continuously improve Quality and HSE systems, processes, and performance., • Represent the business at stakeholder and industry events., • General support of the delivery team and aiding in continuous improvement of Quality and HSE processes. What you will bring: • 3+ years’ experience in Quality within renewables, energy infrastructure, or construction., • Experience across battery energy storage (BESS) or similar renewable technologies (highly desirable)., • Strong understanding of QHSE systems, reporting, and compliance., • Experience working with contractors, landowners, and external stakeholders., • Ability to manage multiple projects and priorities simultaneously., • Confident communicator with strong stakeholder engagement skills., • Proactive, self-motivated, and solutions-focused., • Knowledge of UK grid connections and safety standards (desirable).

Senior EICA Engineer (Contract) – Water Sector An engineering contractor is seeking a Senior EICA Engineer with strong experience in UK water projects to support delivery across multiple frameworks. This is a long term, contract with the option to be outside ir35. Remote workers may also be considered. Key Responsibilities • Produce cost-effective EICA design documentation, • Develop electrical, control, and instrumentation designs, • Conduct site surveys and attend FATs, • Review subcontractor designs and supplier quotations, • Ensure compliance with UK standards, legislation, and specifications, • Prepare technical documentation, equipment requisitions, and installation scopes, • Support construction and commissioning activities Requirements • Extensive experience in UK water sector projects (essential), • 10+ years’ engineering experience, • Strong knowledge of UK standards (including WIMES), • Experience with ATEX, CE marking, and hazardous area installations, • Understanding of HSE and risk management Qualifications • Degree in Electrical, Electronic, or Control Engineering (or equivalent experience) Profile • Strong communicator with a proactive approach, • Experience leading or delegating work, • Safety and client-focused mindset Only those with proof of right to work in the UK should apply for this role.

HSE Supervisor – Renewables & Batteries (UK & Ireland) Hybrid working | Flexible location | Permanent At ENGIE, every role plays a part in accelerating the energy transition. Across the UK and Ireland, we develop and operate renewable and flexible energy assets including solar, wind and battery storage, supporting the move to a low‑carbon future. We have 3 core areas of expertise: renewable energy, flexibility and clients. We produce renewable electricity from the sun, from onshore and offshore wind and green gas from our biomethane plants. We are the UK’s largest provider of highly flexible energy storage, both for electricity and gas We’re now looking for an HSE Supervisor to support our growing Renewables & Batteries portfolio, helping to ensure the highest standards of Health, Safety and Environment across both operational assets and projects under construction. The Role Reporting to the Senior Asset Manager – Renewables & Batteries, you’ll play a key role in overseeing HSE performance across the UK and Ireland. You’ll work closely with asset managers, project and construction teams, and ENGIE’s central HSE function, acting as a point of contact for HSE matters and supporting a strong, positive safety culture across the business. This is a varied role offering exposure across development, construction and operational phases of renewable energy assets. What You’ll Be Doing • Overseeing Health, Safety and Environmental performance across operational renewable and battery assets, • Providing HSE oversight and guidance to projects under construction, • Supporting compliance with ENGIE HSE standards, group guidelines and construction contracts, • Advising Business Development and Project teams on CDM 2015 Regulations and equivalent regulations in the Republic of Ireland, • Carrying out site audits, inspections and producing HSE reports, • Supporting ISO accreditations, due diligence activities and incident investigations, • Working closely with internal and external stakeholders to drive continuous improvement What We’re Looking For Essential • Experience supporting wind, solar and/or battery energy storage assets in construction and operation, • Strong working knowledge of UK Health & Safety legislation, principles and best practice, • Experience in a Health and Safety role within construction and/or process industries, • Experience implementing CDM Regulations (UK) and equivalent regulations in Ireland, • An accredited professional Health & Safety qualification Desirable • Experience with Wind Turbine Safety Rules (WTSR), • A recognised Fire Risk Assessor qualification What We’ll Offer You We support flexible working while recognising the value of coming together for collaboration and on‑site support. • Contract type: Permanent, • Location: Flexible, • Working pattern: Hybrid – 2 days per week in the office or on site, 3 days working from home, • Salary: Dependent on experience, • Bonus: Annual bonus Benefits include: • Pension contributions up to 12%, • Life assurance, • Company share scheme, • 28 days’ annual leave, plus bank holidays, • Private medical, health and dental care, • Ride to Work scheme, • Employee Assistance Programme, • A positive work‑life balance supported by hybrid working, • An inclusive culture where everyone can express and develop their potential, • Three paid volunteering days per year to support local communities Our Commitment At ENGIE, every talent has a role to play in accelerating the energy transition. Make a difference and enjoy a fulfilling professional experience. Take on exciting challenges and build a career path that reflects who you are. Join us and be part of the adventure of the century! ENGIE is an equal opportunity employer. We are committed to creating an inclusive workplace where everyone is respected, valued, and able to thrive. We welcome applications from all backgrounds, regardless of age, gender, disability, ethnicity, religion, sexual orientation or any other characteristic. If you require any reasonable adjustments during the recruitment process, please let us know. We are happy to support you to ensure a fair and comfortable experience.

About the client Our client is a confidential leading international integrated energy company with a global portfolio of offshore deepwater projects. The Basingstoke engineering office is one of the company's key project execution hubs, housing a dedicated Subsea Systems department responsible for delivering complex EPCI contracts across the full project lifecycle — from feasibility through detailed engineering, fabrication, installation, and commissioning — on projects worldwide. Project scope The assignment is based within the client's Basingstoke Subsea Systems department, providing senior technical expertise in Subsea Control Systems across multiple international deepwater EPCI projects. The Senior Engineer covers all engineering phases — from conceptual study and FEED through procurement, fabrication, testing, installation, and commissioning — and acts as the client's Company Representative for all Subsea Control Systems activities on assigned projects. The role requires direct engagement with contractors and vendors, offshore and onshore testing support, and close collaboration with other disciplines within the Subsea Systems department. ℹ The client operates a hybrid working policy: up to 12 working days per month from home are available, enabling approximately 60% remote working. Role overview To provide senior technical leadership for Subsea Control Systems across the full EPCI project lifecycle — from conceptual study through commissioning and handover to operations — ensuring designs meet project requirements, applicable codes and standards, and engineering best practices, while acting as the client's Company Representative on all Subsea Control Systems matters. Reporting line: You will report to the Chief of Subsea Systems and work in daily coordination with the wider Subsea Systems department, interface disciplines, and contractors and vendors throughout all project phases. Key responsibilities Technical design & documentation • Prepare and complete technical documentation for Subsea Control Systems across all project phases: data sheets, functional specifications, preliminary electrical and hydraulic analyses, conceptual study, FEED, tender and contract package preparation, • Ensure Subsea Control Systems designs meet project requirements, applicable codes and standards, and engineering best practices — with a focus on cost and risk reduction, • Prepare and complete large EPCI contracts for Subsea Control Systems across all project phases: feasibility and conceptual study, FEED, call for tender, engineering, procurement, fabrication, testing, installation, and commissioning, • Maintain extensive awareness of international design standards for Subsea Control Systems, in particular API 17F, • Correctly apply company internal standards and HSEQ policies throughout all activities Contractor & vendor management • Follow up supplier calls for tender and selection processes: qualifications, clarifications, and technical recommendations, • Review and approve FEED, tender, and detailed engineering deliverables prepared by contractors, • Supervise contractors and vendors across equipment delivery and engineering deliverables, • Act as Company Representative for all activities related to Subsea Control Systems Testing & commissioning support • Support projects during onshore and offshore testing: Control System FAT, EFAT, integration with DCS/ICCS, • Provide offshore assistance during Control System pre-commissioning activities on board installation vessels, FPSOs, or platforms Cross-discipline collaboration • Collaborate with colleagues within the Subsea Systems department and across interface disciplines throughout all project phases, • Support Design and Safety Reviews, HAZOP, HAZID, and Risk Assessment processes, • Contribute to Umbilical System and Subsea Chemical Injection System design and operation activities Key deliverables • Subsea Control Systems technical documentation delivered on schedule and to the required quality standard across all assigned project phases, • Contractor and FEED deliverables reviewed and approved within defined timescales, • EPCI contract packages prepared accurately and in full compliance with project requirements and applicable standards, • FAT, EFAT, and commissioning support provided on time and in accordance with project schedules, • Company Representative duties performed rigorously across all assigned Subsea Control Systems activities Requirements Education • Minimum BS degree in Mechanical Engineering or related engineering discipline Experience Must-have: • Extensive experience as a Subsea Control Systems Engineer across the full project development lifecycle — from concept development through execution and handover to operations, • Experience in the technical design of Subsea Control Systems from preliminary engineering through detailed design, • Experience in Umbilical System and Subsea Chemical Injection System design and operation, • Experience supervising contractors and vendors across equipment and engineering deliverables, • Experience supporting onshore and offshore project testing: Control System FAT, EFAT, integration with DCS/ICCS, • Experience with offshore assistance during Control System pre-commissioning activities on board installation vessels and/or FPSOs or platforms, • Extensive experience in Subsea Control System design, testing, and commissioning during project execution — considered a major advantage, • Familiarity with the relevant international codes and subsea standards for Subsea Control Systems, in particular API 17F Technical skills • Deep knowledge of Subsea Control Systems design across all EPCI project phases, • Proficient with MS Office; basic knowledge of AutoCAD, • Understanding of electrical and hydraulic analysis applicable to subsea control systems, • Knowledge of HSE and technical risk integration into engineering and project solutions Soft skills • Strong technical authority — able to act as Company Representative and engage independently with contractors and vendors, • Effective collaborator across disciplines and multicultural project environments, • Structured and rigorous approach to documentation and standards compliance, • Fluent English — mandatory

An established consultancy operating exclusively in the mission-critical data centre sector is seeking an experienced Operations Director to drive performance, consistency, and delivery excellence across its growing European portfolio. A industry leader delivering project, commercial, and construction management services on major hyperscale and colocation programmes, the business has built a reputation for high-quality delivery, strong client relationships, and repeat business across complex, large-scale developments. This role sits at the centre of the European operation, ensuring projects are delivered safely, on programme, and to the highest standards expected within live, high-value construction environments. The Role You will lead operations across multiple live data centre construction projects throughout Europe, ensuring consistent delivery standards across all phases — from pre-construction through to commissioning and handover. This is a hands-on leadership role, requiring a strong understanding of construction delivery, sequencing, and the realities of building in mission-critical environments. Key responsibilities include: • Providing operational leadership across multiple data centre construction projects, ensuring safe and efficient site delivery, • Driving programme certainty, construction sequencing, and coordination across MEP, CSA, and commissioning teams, • Managing resource planning and workforce allocation across multiple countries and live projects, • Supporting project mobilisation, ensuring teams, processes, and supply chains are set up for successful delivery, • Overseeing construction performance, identifying risks to programme, cost, and quality, and implementing mitigation strategies, • Working closely with Project Directors and Construction Managers to maintain delivery standards across all sites, • Strengthening relationships with key clients, contractors, and supply chain partners, • Driving consistency in construction methodologies, standards, and reporting across the European portfolio, • Supporting commercial awareness across projects, ensuring alignment between delivery and financial performance, • Promoting a strong safety culture and ensuring HSE compliance across all projects. The Profile This role requires a senior leader with a strong construction background who understands how to deliver complex, high-value projects in fast-paced environments. • Proven experience in an Operations Director / Regional Director / Construction Director role, • A strong background in construction delivery, ideally within data centres or mission-critical environments, • Experience managing multiple projects or programmes across different locations, • A solid understanding of MEP and CSA construction, sequencing, and commissioning integration, • Experience working with hyperscale or colocation clients, or on large-scale infrastructure projects, • Strong leadership and coordination skills across multidisciplinary teams, • The ability to operate at both strategic and delivery level, • Excellent stakeholder management and communication skills

We are urgently looking to onboard Quality Technicians for upcoming projects across the UK & Ireland. Key Requirements: Right to work in the UK (mandatory) Working hours: 10h/day, 60h/week Rotations in line with local/company regulations Must meet HSE standards, including: PPE Laptop & phone Suitable vehicle Valid GWO certifications Scope • Supervise the execution of the foundations of the turbines of the wind farm., • Quality review of main components when arriving to site., • Quality review of minor components at the site warehouse., • Creation of punch items., • Drafting and management of non-conformities., • Audit the execution of the works., • Quality review of the complete WTG when finished, according to Nordex standards., • Report to the Quality Department the progress of the project. Description The work will be performed by a qualified technician/s, with experience in renewable energy with Engineering degree, preferably in Mechanical or Electrical Engineering. Vocational Education (FP) might be accepted. The technician/s will have a car to be able to move across the wind farm and the protective personal equipment (PPE) necessary to access to the wind farm as well as equipment for working at height. Certificates of trainings in working at height (GWO or similar) will be provided. Besides, the technician/s should also have all the equipment to develop their activities such as laptop, and smart phone. Equipment • PPEs for working at heights, • PPEs according to RD614/2001, EN50110-1 or equivalent for local regulations, • Individual car (in compliance with local regulations, in and out of the construction site), • Laptop, • Smart phone Special trainings There are some specific trainings the worker must be trained on: • GWO BST (Basic Safety Training), • Electrical Risk training, according to RD614/2001, EN50110-1 or equivalent for local regulations, • Corresponding Service Lift (Jaso, Hailo or 3S) training for use, • Corresponding Service Lift (Jaso, Hailo or 3S) training for certification/installation (only for DIN projects) • Avanti fall arrester certification (only for DIN projects)

About the client Our client is a confidential leading international power cable manufacturer and installer with a strong track record in delivering offshore and onshore power cable projects across Europe and beyond. The company manages complex EPCI cable installation scopes on major offshore wind and interconnection projects, with an Installation Department responsible for technical documentation, method statement development, and subcontractor management throughout the full installation lifecycle. Project scope The assignment supports the client's Installation Department on offshore power cable projects in the UK area. The Senior Project Installation Engineer acts as the primary technical interface between the client's engineering team and external stakeholders — including end clients, subcontractors, and regulatory authorities — and is responsible for the preparation and management of the full suite of installation engineering documentation. The role covers the following installation engineering scopes: • Cable burial risk assessment (CBRA), • Route engineering, • Burial assessment study (BAS), • Survey works, • Cable installation works, • Pre-sweeping and dredging works, • Mattress installation works, • Rock placement (rock dumping), • Trenching works, • Cable pull-in at landfall and at offshore substation The role is primarily remote with monthly face-to-face meetings required in Milan. UK landfall and onshore site visits are a regular requirement of the assignment. Role overview To provide senior technical leadership for installation engineering on offshore power cable projects in the UK, developing method statements and installation procedures across the full cable installation scope, managing civil works subcontractors at landfall, and acting as the client's technical point of contact with end clients, subcontractors, and authorities. Reporting line: You will report to the Installation Department and provide regular updates on the outcomes of technical meetings, document reviews, and site visits. Key responsibilities Technical interface & client management • Act as technical interface with the end client for document preparation and review throughout the project, • Act as technical point of contact for all scopes of work within the assigned project, • Critically evaluate technical and contractual information; analyse and understand customer technical challenges, • Develop technical design solutions against client scope of work, • Confront with subcontractors, end clients, and authorities to follow up comments on installation documentation produced, • Report to the Installation Department the outcomes of meetings and technical discussions Installation engineering & method statements • Develop technical procedures and method statements for all offshore cable installation activities: CBRA, route engineering, BAS, survey works, cable installation, pre-sweeping/dredging, mattress installation, rock dumping, trenching, and cable pull-in at landfall and offshore substation, • Fully grasp all engineering challenges and effectively utilise engineering tools and techniques to overcome them as they arise, • Ensure that technical solutions are best in class with respect to cost, quality, and safety Civil works & subcontractor management • Manage civil works subcontractors at landfall sites throughout the project lifecycle, • Conduct regular landfall site visits to check project progress and subcontractor performance, • Interpret geotechnical data to inform installation engineering decisions and method statement development Key deliverables • Full suite of method statements and installation procedures delivered on schedule and to the required technical standard, • CBRA, BAS, and route engineering documents completed accurately and in compliance with client and regulatory requirements, • Civil works subcontractors managed effectively at all UK landfall sites, with progress tracked and reported, • Technical comments from clients, subcontractors, and authorities addressed and closed in a structured and timely manner, • Installation Department kept fully informed of technical meeting outcomes and project status Requirements Education • Bachelor's or Master's degree in Engineering Technology, Naval Engineering, or related discipline — an advantage, • Equivalent demonstrated senior experience in offshore cable installation engineering will be considered Experience Must-have: • Proven senior experience in installation engineering for offshore power cable projects — including method statement and installation procedure development, • Experience across multiple cable installation scopes: cable burial, route engineering, trenching, rock dumping, mattress installation, and cable pull-in operations, • Ability to interpret geotechnical data — mandatory, • Experience managing civil works subcontractors at landfall sites Nice-to-have: • Direct site experience at UK landfall and onshore cable installation sites — considered an important plus, • Experience interfacing with regulatory authorities on installation documentation, • Familiarity with offshore wind or HVDC interconnection project environments Technical skills • Strong proficiency in method statement and technical procedure development for offshore marine cable installation, • Ability to interpret and apply geotechnical data in installation engineering contexts, • Good working knowledge of document management and word processing tools (MS Office or equivalent), • Understanding of HSE requirements applicable to offshore cable installation and landfall civil works Soft skills • Strong technical authority — able to engage independently with end clients, subcontractors, and regulatory authorities, • Structured and rigorous approach to technical documentation and comment management, • Effective communicator across multicultural and international project environments, • Fluent English — mandatory; Italian is an advantage given regular Milan coordination

Consultant Role – Emergency Medicine (Waterford) The Consultant will play a key role in: • Clinical leadership within the Emergency Department, • Participating in departmental rotas and providing senior cover, • Supporting service development, quality improvement, and clinical governance, • Providing expert assessment, treatment planning, and management for patients, • Mentoring and teaching NCHDs, trainees, and other multidisciplinary colleagues Salary & Benefits • €235,000 – €283,000 Consultant salary scale (2026 HSE Public Only Consultant Contract), • 30 days annual leave + 10 public holidays, • Dedicated Continuous Medical Education (CME) leave, • Support for research and professional development, • Full guidance through the Irish Medical Council Specialist Registration process Living and Working in Waterford Waterford offers an excellent balance of professional and personal life for Emergency Medicine Consultants: • Ireland’s oldest city with a rich history and vibrant cultural scene, • Beautiful coastal surroundings including beaches and scenic drives, • Strong sense of community with excellent amenities, • Easy access to Cork, Dublin, and regional transport links This region provides an exciting career in Emergency Medicine alongside an outstanding quality of life. Eligibility Suitable applicants may hold: • UK CCT in Emergency Medicine (CESR not eligible), • EU Specialist qualification recognised under EU Directive, • American Board certification in Emergency Medicine, • Canadian Fellowship, • Australian or New Zealand Fellowship Eligibility for Irish Medical Council Specialist Registration in Emergency Medicine is required. Apply NOW! If you are exploring Emergency Medicine Consultant opportunities in Ireland, let's book in a call. 📧 Email: 📱 WhatsApp: +353860853167

Group HSE Manager - Progression to Director (Logistics). Are you a Group Health and Safety Manager from a Logistics / Warehousing background looking for a high-profile leadership role, managing a team of H&S Managers across the UK while receiving further training in quality, with a clear pathway to

Are you a skilled LEV Engineer driven to create safe, compliant and high-performing working environments? Our client in Liverpool is looking for a LEV Engineer on a 12-month FTC to play a key role in a site-wide LEV compliance and enhancement programme covering design, installation, commissioning and validation.LEV Engineer12 month FTCSalary dependent on experienceMonday to Thursday 07.00 to 16.00 or 08:00 to 17:00, Friday 07.00 – 12.00LiverpoolLEV EngineerJob Description • Design, specify, and modify LEV systems for manufacturing and workshop environments, • Coordinate with suppliers, contractors and internal teams on installation, commissioning, and upgrades, • Carry out LEV commissioning, performance testing, and verification in line with BOHS and HSE guidance, • Produce technical documentation including calculations, reports, airflow data, and performance metrics, • Ensure compliance with COSHH and HSG258, identify risks, and support training and cross-team collaborationLEV EngineerEssential Skills/Experience/Qualifications, • Proven experience in LEV design, installation oversight, commissioning and performance assessment., • Strong understanding of COSHH, HSG258, airflow principles, du...

HSE Program Management: Maintain and improve comprehensive HSE programs and policies tailored to bulk liquid storage and blending operations. HSE experience, ensuring alignment with UK and EU HSE regulations and standards. A rare opportunity for a HSE Manager to have a positive impact across a highl

Project Director – This is a remote working position but will require frequent travel to Yorkshire min 2 days a week - Excellent Salary & Benefits Dahlia Recruitment Renewables are delighted to be partnered with this rapidly growing Renewable Energy business to recruit for an experienced Project Director. The role will be will require regular travel to one of the sites in Yorkshire and other sites on an ad hoc basis. Role Overview The Project Director is a key member of the company executive leadership team, responsible for the end-to-end delivery of the UK infrastructure projects. Project The Project Director leads project execution from pre final Investment Decision (FID) through to construction, commissioning and operations handover, ensuring each project is investor-ready, technically sound and delivered on time, within budget, and to the highest safety and quality standards. This role is pivotal in converting the companies mature project pipeline into operational low-carbon hydrogen production assets, as the business continues to scale nationally and internationally. The Project Director ensures alignment across engineering, delivery, commercial and operational teams to maintain the companies position at the forefront of the UK hydrogen transition. Key Responsibilities include (full details are on a more detailed JD) • Pre-FID Delivery & Readiness, • Project Execution & Delivery (Post-FID), • Risk, Commercial & Technical Governance, • Stakeholder & Partner Engagement, • Team Leadership & Delivery Capability Qualifications and Experience • 10+ years' experience delivering large-scale infrastructure or energy projects from pre-FID to operations., • Demonstrated success in project structuring, engineering, contract negotiation and execution., • Experience building project delivery frameworks and managing high-performing delivery teams., • Strong familiarity with UK permitting, regulatory regimes, HSE standards and government funding structures., • Degree in engineering, project management or related discipline, chartered or PMP status preferred., • Experience in hydrogen, renewables or gas infrastructure., • Exposure to Contracts for Difference (CfD), Hydrogen Allocation Rounds (HAR1) or similar subsidy-backed funding mechanisms is desirable., • Background in PE-backed businesses or joint ventures is desirable. This is an excellent opportunity to join a growing business so please apply now or contact me for more details 🔔 Follow our company page for industry updates and live roles: ___ Also our new Biogas networking and podcast platform ___ ___

Project Development Manager / Construction Project Manager — Advanced Nuclear Energy Infrastructure Location: UK (flexible/hybrid) Type: Permanent An emerging nuclear energy technology developer is building its core project team ahead of a significant development phase. This is a rare opportunity to join a small, senior team at the earliest stage of a programme that aims to fundamentally change how nuclear energy is deployed. The organisation is developing an innovative approach to nuclear power generation that draws on construction, permitting, and project development expertise from outside the traditional nuclear build model. The work ahead involves site development, environmental permitting, planning consent, and supply chain mobilisation — requiring someone who is comfortable navigating complexity in a pre-FID, pre-construction environment. What we are looking for: We are not looking for the perfect CV. We are looking for people who have done several of the following and can learn the rest: • Construction project management on complex, regulated infrastructure, • Development consent, environmental permitting, or HSE/CDM regulatory processes, • Procurement and supply chain management in a manufacturing or industrial environment, • Experience working with shipyards, maritime construction, or offshore/nearshore infrastructure, • Licensing or regulatory interface in a safety-critical industry (nuclear experience welcome but not required) What matters most is that you are intellectually curious, comfortable with ambiguity, and have the kind of broad practical experience that lets you look at a new challenge and say — I can figure that out. Why this is interesting: This programme is small by design. You will work directly with the founding team, own significant scope from day one, and be part of shaping how the organisation grows. For the right person, this is the kind of role that comes along once in a career.

About the client Our client is a confidential leading international integrated energy company with a strong global project engineering capability, currently driving an ambitious energy transition programme spanning CCS/CCUS, renewables, and hydrogen alongside its traditional oil and gas portfolio. The Basingstoke engineering office is a fully integrated project execution hub delivering multi-discipline engineering across all phases of complex projects worldwide, with a dedicated Subsea Systems department at its core. Project scope The assignment is based within the client's Basingstoke Subsea Systems department, providing Flow Assurance technical leadership across multiple concurrent international oil and gas projects — from feasibility and concept development through FEED, detailed engineering, and handover to operations. The role also extends to CCUS projects, covering CO₂ transportation system assessment and thermo-hydraulic studies specific to CO₂ transport. The Senior Engineer will operate as both a technical lead and a Discipline Project Lead (PDL), accountable for Flow Assurance deliverables across assigned projects and responsible for mentoring junior engineers within the discipline. The client operates a hybrid working policy: up to 12 working days per month from home are available, enabling approximately 60% remote working. Role overview To provide senior Flow Assurance technical leadership across the full project lifecycle — from conceptual studies through FEED, tendering, detailed engineering, and operations support — ensuring technical rigour, cross-discipline integration, and compliance with applicable standards across the client's international oil and gas and CCUS projects. Reporting line: You will report to the Flow Assurance Coordinator and the Chief of Subsea Systems, and work in daily coordination with discipline engineers, interface disciplines (Pipelines/Subsea, Process/Facilities, Operations), contractors, and reservoir and laboratory teams. Key responsibilities Technical delivery • Prepare all Flow Assurance technical documentation across project phases: conceptual study, FEED, tendering, contract package preparation, detailed engineering, and operations, • Review and approve FEED, tender, and detailed engineering deliverables prepared by contractors for the Flow Assurance discipline, • Identify, define, and analyse complex multiphase hydrocarbon transportation schemes, • Assess CO₂ transportation systems, evaluate operating envelopes, and support thermo-hydraulic studies for CCUS projects, • Provide technical support to interface disciplines — Pipelines/Subsea, Process/Facilities, Operations — ensuring integrated solutions across all project phases, • Support operations and troubleshoot start-up and commissioning issues as required Procurement & contractor management • Follow up supplier calls for tender and selection processes: qualifications, clarifications, and technical recommendations for the Flow Assurance discipline, • Manage interfaces with reservoir engineering and laboratory teams throughout the project lifecycle Project leadership & PDL duties • Act as Discipline Project Lead (PDL) on assigned complex projects: perform technical and administrative PDL functions, • Proactively identify and report manhour and schedule variations due to scope changes; escalate to the Flow Assurance Coordinator and Chief of Subsea Systems, • Support the Flow Assurance Coordinator and Chief of Subsea Systems in preparing manhour estimates for new proposals, • Liaise with engineering disciplines throughout the project execution phase; coordinate and manage cross-discipline interfaces Standards, mentoring & continuous improvement • Ensure awareness of and compliance with international standards and codes applicable to Flow Assurance, • Advise on correct interpretation and application of company internal standards and HSEQ policies; develop new standards as required, • Mentor engineers within the Flow Assurance team; contribute to knowledge sharing and continuous improvement across the discipline, • Support technical and safety reviews: HAZOP, HAZID, risk assessments, design and safety reviews Key deliverables • Flow Assurance technical documentation delivered on schedule and to the required quality standard across all assigned project phases, • Contractor and FEED deliverables reviewed and approved within defined timescales, • Manhour estimates and variation forecasts provided accurately and proactively, • PDL functions performed rigorously across assigned complex projects, • Junior engineers mentored with structured guidance and discipline knowledge transfer Requirements Education • Degree in Engineering with graduate-level knowledge of thermodynamics and fluid dynamics — petroleum, chemical, mechanical, or related discipline Experience Must-have: • Extensive experience as a Flow Assurance Engineer across the full project development lifecycle — from concept development through FEED, detailed engineering, and handover to operations, • Proven capability in identifying, defining, and analysing complex multiphase hydrocarbon transportation schemes, • Experience performing technical review of Flow Assurance documentation produced by team members and contractors, • Experience with Technical Audit and Design & Safety Reviews — HAZOP, HAZID, Risk Assessment, • Ability to manage complex and diverse assignments with a high degree of independent technical judgement Nice-to-have: • Operational experience (commissioning, start-up, or production support), • Experience on CCUS projects — CO₂ transportation system assessment and thermo-hydraulic modelling Technical skills • Proficient with Flow Assurance simulation software: OLGA, PVTSim, Multiflash, Pipenet, Pipesim, Hysys, Unisim, • Familiarity with programming languages (Matlab, C++, Python) — an advantage, • Strong understanding of international codes and standards applicable to Flow Assurance and subsea systems, • Knowledge of HSE and technical risk integration into engineering and project solutions Soft skills • Strong technical leadership and engineering judgement — able to operate independently at senior level, • Effective communicator across disciplines, stakeholder levels, and cultures — both laterally and vertically within the organisation, • Collaborative and multidisciplinary approach to project delivery, • Structured task prioritisation and ability to manage concurrent workstreams under pressure, • Fluent English — mandatory

The Company: OXBO are partnered with a fast-growing UK IPP delivering utility-scale Battery Energy Storage System (BESS) projects across the UK. As part of their continued growth, they’re looking for a Quality Manager. As Quality Manager, you’ll be responsible for leading projects from kick-off through to O&M handover, ensuring the highest standards are maintained across quality, safety and compliance. The Benefits: • Competitive Salary + Annual bonus scheme., • Car allowance., • Remote working, with site visits as required., • Fast-growing IPP with real projects, and a hands of management style. What you will be doing: • Lead Quality and HSE from Client’s perspective across multiple battery energy storage (BESS) projects., • Ensure all incidents and cases are recorded, tracked, and resolved effectively., • Monitor contractor and subcontractor compliance with QHSE standards., • Support delivery teams in meeting safety, quality, cost, time, and risk objectives., • Conduct site visits, audits, and stakeholder engagement activities., • Oversee commissioning quality processes (FAT/SAT/SIT) and non-conformance tracking., • Produce reports for senior leadership and board-level review., • Continuously improve QHSE systems, processes, and performance., • Represent the business at stakeholder and industry events., • General support of the delivery team and aiding in continuous improvement of QHSE processes. What you will bring: • 3+ years’ experience in Quality within renewables, energy infrastructure, or construction., • Experience across battery energy storage (BESS) or similar renewable technologies (highly desirable)., • Strong understanding of Quality and HSE systems, reporting, and compliance., • Experience working with contractors, landowners, and external stakeholders., • Ability to manage multiple projects and priorities simultaneously., • Confident communicator with strong stakeholder engagement skills., • Proactive, self-motivated, and solutions-focused., • Knowledge of UK grid connections and safety standards (desirable).

An ambitious and forward-thinking company in Liverpool seeks a Health, Safety and Environmental Manager to lead cultural change and enhance HSE practices.

Different Technologies Pty Ltd.Health and Safety Assistant to promote a 'Safety First' culture and conduct regular safety checks within their Liverpool facility.The ideal candidate will have a NEBOSH qualification and demonstrate excellent organizational and communicational skills.Responsibilities i

A leading energy solutions company is seeking a skilled Project Manager in Liverpool.This role involves planning and managing projects to ensure delivery meets safety, compliance, and budget expectations.The ideal candidate will have strong leadership skills and experience in overseeing project exec

You will also develop internal HSE processes and policies to ensure compliance with Life Saving Policies, corporate standards, national HSE legislation and regulations; whilst driving improvements in Process Safety Management and execution across the business, working in conjunction with engineering

Energy Jobline ZR is seeking a proactive HSE Manager to oversee health, safety, environmental, and sustainability strategies at their Liverpool site.

Communicate HSE alerts, updates, and good practices across the site. Represent the site in group-level HSE meetings and reviews. Strong working knowledge of ISO14001, ISO45001, and UK HSE legislation.

Vacancy - Electrical Technician Are you an experienced and qualified Electrical Engineer looking to develop your experience in a technician role and beyond? Do you have experience in an industrial environment working with heavy plant and equipment? We are seeking a Electrical Technician to work within Mersey Engineering. Your Role In this role you will work with the Infrastructure engineering team, to deliver on-time delivery, continuous flow, customer satisfaction and zero defects, across a day's role, carrying out maintenance on heavy plant and equipment. You will complete planned and reactive maintenance activities and carry out modifications to all types of heavy plant and equipment, liaising with operations to prioritise breakdown repairs, using fault finding diagnostic techniques and equipment to reduce the impact of reactive maintenance. You will assist the team when required in a range of activities, including project work, QA systems and Health and Safety. It's vital that all activities are documented and carried out with due care and attention in line with our Health and Safety policy and HSE regulations. This role is classified as safety critical. Your duties in this role may include driving on site; working at height and/or in confined spaces; operating/driving plant; manual handling; lone working; night work. If successful in your application, you will be required to attend a pre-placement medical assessment to confirm your fitness for work in this role. What you'll bring You will be qualified to a minimum of ONC/HNC or equivalent in Electrical Engineering with experience of working with heavy plant and equipment in an industrial environment. You will also have: A working knowledge of Programmable Logical Control or drive control systems and HV networks would also be desired. Additionally, you should have experience working with PLC equipment and be willing to participate in an on-call rota for out-of-hours reactive maintenance when needed. Experience maintaining hydraulic equipment, impounding pumps, lock gates, bridges, and related systems would be advantageous. You will be expected to consistently uphold Peel Ports' Health and Safety standards, with the ability to create Risk Assessments and Method Statements, and have a solid understanding of Permit to Work systems. Experience with CMMS systems, including fault and defect reporting, is required. You should also have knowledge and experience with relevant statutory requirements and legislation, including but not limited to the Health and Safety at Work Act 1974, PUWER, LOLER, and PSSR. Who are we? Already one of the UK's leading port and logistics companies, we are planning substantial capital investment over the next 5 years to achieve our vision of becoming the UK's leading port operator. We have ambitious plans to grow and transform the supply chain to benefit our customers. Our investments are decarbonizing our operations, which in turn is helping us work towards our goal of having Net Zero Port Operations by 2040. Much of our success depends on our unrivalled facilities and technology. But in our sector, it comes down to having the right talent to enable our organisation to grow. What we can offer you In addition to a competitive salary, we have a strong track record of developing our people to expand their skills and experience and develop their careers. Valuing and rewarding our workforce is important to us which is why we offer a fantastic range of flexible benefits to choose from, such as: 27 Days Annual Leave (plus bank holidays) Up to 10% Matched Contribution Pension Peel Ports Flexible Benefits including salary sacrifice car scheme, healthcare cash plans, Cycle2Work Scheme, Critical Illness insurance, Gym Membership Scheme, Retail Vouchers, plus more! Commitment to learning and personal development - Last year we supported over 50,000 hours of training and personal development! We promote good physical and mental health and can provide additional support to colleagues via our Employee Assistance Programme when required If you believe you have the skills and experience we are seeking and you want to join a thriving and ambitious place to work, we'd really like to hear from you! TPBN1_UKTJ

Role: - NDT Engineer - PCN Level 2 PAUT Location: Wirral (site-based), with UK and international travel as required Working Pattern: Full-time, including onshore, offshore, shipyard, and lab site attendance on an ad-hoc basis in line with operational requirements. Salary: - Competitive starting salary plus onshore and onshore day rates Role Overview An exciting opportunity has arisen for a PCN Level 2 PAUT-qualified NDT Engineer to join a growing and forward-thinking NDT operation supporting marine, energy, and industrial sectors. This role is ideal for a commercially aware, entrepreneurial, and proactive engineer who wants more than routine inspection work. Unlike many traditional NDT roles, this position offers variety, responsibility, client exposure, and involvement in developing new opportunities and services. We are seeking a flexible, solutions-focused go-getter who thrives in dynamic environments, enjoys client interaction, and is motivated by helping grow a business while delivering high-quality technical work. The role is primarily based on the Wirral and candidates must live locally or be willing to relocate. Travel at short notice both onshore and offshore, in the UK and internationally is a key requirement. Responsibilities • Carry out PAUT and conventional ultrasonic inspections across marine, offshore, energy, and industrial assets. • Perform inspection campaigns on structural and pressurised systems, both onshore and offshore. • Deliver corrosion mapping and integrity assessment surveys. • Manage assigned projects from mobilisation through reporting and client communication. • Maintain strong technical quality, safety compliance, and reporting standards. • Engage directly with clients to build trusted relationships and secure repeat work. • Identify commercial opportunities and support business development initiatives. • Contribute to specialist investigative and technically complex assignments as the service offering grows. • Maintain accurate documentation, inspection records, and reports to agreed standards and deadlines. The Person and skills required • PCN Level 2 PAUT certification (mandatory). • PCN Level 2 Ultrasonic Testing: oUT 3.1 Plate oUT 3.2 Pipe o(3.8/3.9 advantageous but not essential) • Entrepreneurial and commercially minded • Demonstrable industrial inspection experience in commercial environments. • Experience inspecting welded structures and pressurised systems. • Experience conducting corrosion mapping surveys. • Understanding of degradation mechanisms • Good working knowledge of international codes, standards, and inspection practices. • Strong awareness of HSE requirements and risk assessment processes. • Ability to work independently and manage workload effectively. • Strong communication and client-facing skills. • Proficiency with Microsoft Office and digital reporting tools. • Interested in varied, technically challenging work rather than repetitive assignments • Full right to work in the UK and ability to travel at short notice. What Makes This Role Different Many NDT roles involve repetitive site deployment with limited development opportunities. This position offers: • Exposure to varied marine, offshore, and industrial projects. • Direct client engagement and project ownership. • Opportunities to help shape and grow new service offerings. • Development into specialist technical and investigative work. • A team environment that values initiative and commercial awareness. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Role: - NDT Engineer - PCN Level 2 PAUT Location: Wirral (site-based), with UK and international travel as required Working Pattern: Full-time, including onshore, offshore, shipyard, and lab site attendance on an ad-hoc basis in line with operational requirements. Salary: - Competitive starting salary plus onshore and onshore day rates Role Overview An exciting opportunity has arisen for a PCN Level 2 PAUT-qualified NDT Engineer to join a growing and forward-thinking NDT operation supporting marine, energy, and industrial sectors. This role is ideal for a commercially aware, entrepreneurial, and proactive engineer who wants more than routine inspection work. Unlike many traditional NDT roles, this position offers variety, responsibility, client exposure, and involvement in developing new opportunities and services. We are seeking a flexible, solutions-focused go-getter who thrives in dynamic environments, enjoys client interaction, and is motivated by helping grow a business while delivering high-quality technical work. The role is primarily based on the Wirral and candidates must live locally or be willing to relocate. Travel at short notice both onshore and offshore, in the UK and internationally is a key requirement. Responsibilities Carry out PAUT and conventional ultrasonic inspections across marine, offshore, energy, and industrial assets. Perform inspection campaigns on structural and pressurised systems, both onshore and offshore. Deliver corrosion mapping and integrity assessment surveys. Manage assigned projects from mobilisation through reporting and client communication. Maintain strong technical quality, safety compliance, and reporting standards. Engage directly with clients to build trusted relationships and secure repeat work. Identify commercial opportunities and support business development initiatives. Contribute to specialist investigative and technically complex assignments as the service offering grows. Maintain accurate documentation, inspection records, and reports to agreed standards and deadlines. The Person and skills required PCN Level 2 PAUT certification (mandatory). PCN Level 2 Ultrasonic Testing: oUT 3.1 Plate oUT 3.2 Pipe o(3.8/3.9 advantageous but not essential) Entrepreneurial and commercially minded Demonstrable industrial inspection experience in commercial environments. Experience inspecting welded structures and pressurised systems. Experience conducting corrosion mapping surveys. Understanding of degradation mechanisms Good working knowledge of international codes, standards, and inspection practices. Strong awareness of HSE requirements and risk assessment processes. Ability to work independently and manage workload effectively. Strong communication and client-facing skills. Proficiency with Microsoft Office and digital reporting tools. Interested in varied, technically challenging work rather than repetitive assignments Full right to work in the UK and ability to travel at short notice. What Makes This Role Different Many NDT roles involve repetitive site deployment with limited development opportunities. This position offers: Exposure to varied marine, offshore, and industrial projects. Direct client engagement and project ownership. Opportunities to help shape and grow new service offerings. Development into specialist technical and investigative work. A team environment that values initiative and commercial awareness. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ