Trabajos hydraulic engineer en LondonCrear alertas

Company Description Aeroloop AI is a leading technology company that leverages cutting-edge artificial intelligence to innovate and optimize infrastructure and operational systems. With a focus on sustainable and efficient solutions, Aeroloop AI is dedicated to pushing the boundaries of what's possible in energy, transportation, and facility management. At Aeroloop AI, we empower our team to solve complex challenges, fostering a culture of creativity and continuous improvement. Join us in shaping the future of intelligent systems and infrastructure across the globe. Role Description We are seeking a seasoned Senior Critical Facilities Engineer specializing in industrial HVAC and thermodynamic control loops for high-density data centers. You will be responsible for the continuous uptime, airflow topology optimization, and mechanical efficiency of mission-critical data halls. This role bridges raw physical thermodynamics with day-to-day facility scaling, focusing heavily on managing thermal lag during sudden computational workload spikes. Key Responsibilities • Lead the monitoring, troubleshooting, and optimization of complex chiller plants, CRAH/CRAC units, Variable Primary Flow loops, and dry coolers., • Manage hot/cold aisle containment structures and coordinate floor tile placement to eradicate localized hot spots in data halls exceeding 15 kW per rack., • Execute transient thermal analysis and utilize Computational Fluid Dynamics (CFD) tools to simulate airflow short-circuiting and heat stratification under maximum IT loads., • Draft and execute complex Method of Procedures (MOPs) for altering cooling setpoints without violating strict customer Uptime SLAs., • Provide technical evaluation for integrating incoming high-density liquid cooling infrastructure (Direct-to-Chip cold plates, Immersion Cooling, and CDUs). Required Qualifications • 5+ years of operational experience within Tier III or Tier IV multi-tenant colocation or hyperscale facilities., • Direct hands-on experience using CFD modeling software (e.g., 6SigmaRoom / Future Facilities, Ansys Fluent, or TileFlow)., • Strong working knowledge of psychrometric charts, hydraulic sequencing, and real-world thermal lag dynamics in centralized chilled water plants., • B.Sc. or equivalent practical background in Mechanical Engineering, Thermofluid Sciences, or Building Science.

Pump EngineerCroydon£44,000 - £46,000 Basic + Overtime (£55,000 - £70,000 OTE) + Premium Rates + Progression + Technical Training + OEM Training + Company Van + Pension + Mobile Phone + Fuel Card + Flexible Working HoursJoin a growing company where your skills are valued and your career progression is genuinely supported. This is an excellent opportunity for an experienced Pump Engineer to work for a market-leading supplier, installer, and maintainer of pumps and associated equipment across clean and wastewater applications throughout the South East.With projects ranging from factories, hospitals, and data centres to housing associations and commercial buildings, no two days are the same. You'll benefit from ongoing technical development, industry-leading training, and the opportunity to significantly increase your earnings through overtime and premium rates.Your Role as a Pump Engineer Will Include:Service, maintenance and installation of pumps and associated equipmentCovering within the M25 region Monday to Friday field-based role (optional weekend work)Attending breakdowns, planned preventative maintenance visits and installation projectsThe Successful Pump Engineer Will Have:Previous experience working on pumps or associated electro-mechanical equipmentStrong mechanical and electrical fault-finding skillsExperience carrying out service, maintenance and installation workFull UK driving licence*Familiarity with pump systemsKeywords: Pump Engineer, Pump Service Engineer, Pump Maintenance Engineer, Pump Installation Engineer, Field Service Engineer, Service Engineer, Mobile Engineer, Maintenance Engineer, Installation Engineer, Electro-Mechanical Engineer, Electromechanical Technician, Mechanical Engineer, Electrical Engineer, Multi-Skilled Engineer, Technical Service Engineer, Site Service Engineer, Mobile Maintenance Engineer, Wastewater Engineer, Clean Water Engineer, Water Treatment Engineer, Utilities Engineer, Mechanical Fitter, Electrical Fitter, Maintenance Technician, Service Technician, Rotating Equipment Engineer, Rotating Machinery Engineer, Plant Engineer, Industrial Maintenance Engineer, Facilities Engineer, Building Services Engineer, M&E Engineer, Process Engineer, Water Hygiene Engineer, Drainage Engineer, Sewage Pump Engineer, Hydraulic Engineer, Reliability Engineer, Breakdown Engineer, Commissioning Engineer, Equipment Engineer, Service & Maintenance Engineer, Reactive Maintenance Engineer, PPM Engineer, Grundfos, Xylem, Wilo, Sulzer, Flowserve, KSB, SPP Pumps, Crest Pumps, Castle Pumps, Pump Supplies, PumpServ, Thames Water, Southern Water, Veolia, Adler & Allan, Morrison Water Services, M Group Services, South East Water, Affinity Water, BGEN, Atlas Copco, Ingersoll Rand, Smith & Byford, TSG, Mitie, CBRE, ISS, EMCOR, Equans, Vinci Facilities, Integral UK, Dalkia, SPIE, NG Bailey, Kier Facilities Management, Bellrock, OCS and JLL.TPBN1_UKTJ

About The RoleRight across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive.Where will you be working?We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Were problem solvers with over 140 years of combined experience in engineering and infrastructure.This role will be within our water and wastewater capital project delivery team. Our teams deliver large-scale capital programmes aimed at keeping water infrastructure resilient for the long-term while protecting the environment.What will you be doing?Were looking for a Systems Optimisation Engineer to join our Thames Water Lot 3 contract, supporting our Network Operations Team across London and the Thames Valley.In this role, youll be at the heart of solving pressure-related challengesinvestigating low-pressure issues, customer complaints and critical alarms, then developing smart, data-led solutions to keep our network performing at its best.Youll monitor DMA and DM availability, support technical fixes, and create robust risk assessments for activities impacting the clean water network. From pressure-managed areas to asset operations and outage planning, youll ensure all work aligns with Thames Waters Asset Management Procedures.Youll also dig into long-term network behaviourshead loss, low flows, supply resilience and water quality trendsusing operational data to spot issues, improve system integrity and update hydraulic schematics that guide future decisions.What youll bring Proven experience and track record of network operations and a knowledge of key activities such as valve operations, mains flushing and issuing/compliance with permits to workHave a clear understanding of the Permit to Work systemHave previous knowledge and experience with GIS mapping software and hydraulic modelling. This is preferred, but not mandatoryWhats in it for you?We offer a range of benefits designed to support your life in and out of work, some of which include; Contributory pension schemeOnline GP service, 24 hours a day, 365 days a yearEmployee assistance programmeMy Rewards portal, access to 1000s of retail discountsLife assuranceCycle to work, salary finance and give as you earn schemesEnhanced maternity, paternity leave and adoption leaveReward and recognition schemeRecommend a friend get rewarded for introducing people to us!In addition, this role offers; Private health care single coverHealth Care Cash Plan, giving you the ability to claim back medical expenses for things like dental, eyecare and physiotherapy and much more!25 days annual leave plus bank holidaysDiscretionary bonus schemeAbout usWe want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. Were one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs.Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planetWere open and seek new and better ways of exceeding expectationsWere together and as one team; the whole is greater than the sum of the partsWere ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development.Its an exceptional time to be a part of M Group.Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered.For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.#MGroupWTPBN1_UKTJ

Synopsis: Our client is seeking a Commissioning / Installation Engineer from an industrial equipment background. £K Excellent Negotiable Salary + Quarterly Bonus, Car Scheme, Excellent Pension, etc. Flexible Central England Location, East /West Midlands, Greater Manchester, Bristol AreaJob Title: Commissioning / Installation Engineer - Industrial Vacuum EquipmentPackage:£K Excellent Negotiable Salary + Quarterly Bonus, Company Vehicle, pension etc.Area / location:Flexible Central England Home Base (Near an Airport) with UK RemitBrief job description: Our Client, a Global Leader in the supply, installation and support of Industrial Vacuum furnaces, are expanding their UK based Service Team. They are currently looking for Commissioning / Service Engineers ideally located in Central England. The position requires travel throughout the UK, Europe. The successful candidate would be mainly based in the UK and should be expecting to be away from home Monday to Friday if the site is not within travelling distance of their home. There is also the possibility of periods of overseas work where the engineer would be expected to be away for up to 4-5 weeks, anytime above this would be agreed between the engineer and their manager beforehand. A team of engineers share the overseas work and would not be left to one engineer. This role is ideally suited to a person with electro/mechanical maintenance background wanting to get into the service / installation industry. The role will primarily be to supervise installation contractors while the equipment is being installed and then take the equipment through the site acceptance tests however there will be service work required as well from time to time. The successful applicant will have the following technical capabilities: Electrical and /or Mechanical qualification C&G or equivalent. Understand electrical schematics Understand mechanical drawing. Fault finding and regular maintenance functions of mechanical assemblies, drives, pumps etc. Familiarity with pneumatic, water, hydraulic & electrical systems and their functions. Working knowledge of temperature control instrumentation, invertors PLCs and HMIs Experience with Allen Bradley & Siemens PLC programmes. Experience with other types will be considered. Experience with fault finding PLC programs. Familiarity with Microsoft Office programmes. Additional skills / qualifications that would be advantageous but not essential as product training will be given. Knowledge of vacuum technology would be an advantage. BS7671 18th Edition Qualification. C&G 2391-52 Initial and periodic inspection and testing. Ability to modify PLC programs to instructions given by the engineering department.TPBN1_UKTJ

Lifting Engineer opportunity in Ealing with a growing specialist lifting equipment business offering overtime, bonus, healthcare and progression.The CompanyWe are recruiting for a leading specialist lifting equipment business experiencing continued growth across the region. This is an excellent opportunity for a Lifting Engineer to join a professional and supportive team, working with a wide range of specialist lifting equipment while developing your technical skills and career.The successful Lifting Engineer will be responsible for inspecting, servicing, repairing and testing lifting equipment to industry standards while maintaining excellent levels of safety and customer service. This Lifting Engineer position offers long-term stability, varied work, and the opportunity to become an integral part of a growing organisation.Key Benefits Salary of £35,000 to £45,000Overtime available to increase earningsCompany bonus schemeHealthcare packagePension scheme25 days holiday plus bank holidaysMonday to Friday working hoursOngoing training and development opportunitiesCareer progression within a growing businessWork with specialist lifting equipment and industry-leading productsAbout the Role As a Lifting Engineer , you will carry out inspections, servicing, repairs and testing of lifting equipment in accordance with relevant regulations and company procedures. You will be involved in maintaining high workshop standards, ensuring equipment is compliant and safe for use, and supporting the efficient operation of the depot.Key responsibilities include:Inspection and testing of lifting equipmentServicing and repairing a variety of specialist lifting productsDiagnosing mechanical and electrical faultsCompleting inspection and maintenance documentationEnsuring compliance with safety and quality standardsMaintaining workshop and warehouse housekeepingMonitoring equipment condition and stock levelsSupporting operational efficiency across the branchAbout You To be successful as a Lifting Engineer , you may have experience working with lifting equipment, plant machinery, material handling equipment, cranes, hoists, hydraulic equipment or other mechanical products.We welcome applications from candidates with:Mechanical or engineering experienceInspection, service or repair experienceStrong attention to detailGood problem-solving skillsA commitment to health and safetyThe ability to work independently and as part of a teamExcellent communication skillsYou may have worked as a: Lifting Equipment Engineer, Workshop Engineer, Inspection Engineer, LOLER Engineer, Crane Engineer, Hoist Engineer, Service Engineer, Mechanical Engineer, Maintenance Engineer, Test and Inspection Engineer, Lifting Gear Technician, LEEA Engineer, Workshop Fitter, or similar.Next Steps If you are a motivated Lifting Engineer looking to join a growing business with excellent earning potential, specialist equipment and genuine career prospects, apply today.TPBN1_UKTJ

Field Service EngineerEnfield£28,000 - £35,000 Basic (£50,000 - £70,000 OTE) + Overtime + Premium Rates + Progression + Technical Training + OEM Training + Company Van + Pension + Mobile Phone + Fuel Card + Flexible Working HoursGrasp the opportunity to earn £50,000 - £70,000 whilst working as a Field Service Engineer for a growing and highly respected business. Benefit from ongoing technical development, OEM training, and genuine career progression whilst becoming a specialist within a thriving industry.This is an exciting opportunity for a Field Service Engineer to work for a market-leading supplier, installer, and maintainer of pumps and associated equipment across clean and wastewater applications throughout the South East. With projects ranging from factories, hospitals, and data centres to housing associations and commercial buildings, no two days are ever the same.Join a close-knit engineering team where ongoing training and development are actively encouraged, allowing you to build a long-term career whilst significantly increasing your earnings through overtime and premium rates.Your Role as a Field Service Engineer Will Include:Service, maintenance and installation of pumps and associated equipmentWorking across clean water and wastewater applicationsCovering Enfield, North London, Hertfordshire, Essex and the surrounding M25 regionMonday to Friday field-based roleAttending breakdowns, planned preventative maintenance visits and installation projectsReceiving ongoing OEM and in-house trainingThe Successful Field Service Engineer Will Have:Electro-mechanical knowledge or experiencePump experience advantageous but not essentialA motivated attitude and willingness to learnAbility to travel across a regional patch within North London and the M25Full UK driving licenceKeywords: Field Service Engineer, Service Engineer, Mobile Engineer, Maintenance Engineer, Installation Engineer, Electro-Mechanical Engineer, Electromechanical Technician, Mechanical Engineer, Electrical Engineer, Multi-Skilled Engineer, Technical Service Engineer, Site Service Engineer, Mobile Maintenance Engineer, Pump Engineer, Pump Technician, Pump Service Engineer, Pump Maintenance Engineer, Pump Installation Engineer, Wastewater Engineer, Clean Water Engineer, Water Treatment Engineer, Utilities Engineer, Mechanical Fitter, Electrical Fitter, Maintenance Technician, Service Technician, Field Technician, Installation Technician, Workshop Engineer, Workshop Technician, Rotating Equipment Engineer, Rotating Machinery Engineer, Plant Engineer, Industrial Maintenance Engineer, Facilities Engineer, Facilities Maintenance Engineer, Building Services Engineer, M&E Engineer, Commercial Maintenance Engineer, Process Engineer, Water Hygiene Engineer, Drainage Engineer, Sewage Pump Engineer, Hydraulic Engineer, Mechanical Technician, Electrical Technician, Engineering Technician, Reliability Engineer, Breakdown Engineer, Commissioning Engineer, Support Engineer, Calibration Engineer, Equipment Engineer, Machinery Engineer, Industrial Engineer, Service & Maintenance Engineer, Reactive Maintenance Engineer, PPM Engineer.,Grundfos, Xylem, Wilo, Sulzer, Flowserve, KSB, SPP Pumps, Crest Pumps, Castle Pumps, Pump Supplies, PumpServ, Thames Water, Veolia, Adler & Allan, Morrison Water Services, M Group Services, Affinity Water, Anglian Water, BGEN, Atlas Copco, Ingersoll Rand, Smith & Byford, TSG, Mitie, CBRE, ISS, EMCOR, Equans, Vinci Facilities, Integral UK, Dalkia, SPIE, NG Bailey, Kier Facilities Management, Bellrock, OCS and JLL.TPBN1_UKTJ

We are looking for a Highly skilled and proactive Field Service Engineer to carry out both breakdown repairs (reactive maintenance) and Planned Preventative Maintenance (PPM) on loading bay equipment. This includes dock levellers, scissor lifts, roller shutter doors, loading bay gates,associated mechanical, electrical, and hydraulic systems.Key Responsibilities for aField Service Engineer - Loading BaysAttend customer sites to diagnose and repair faults on scissor lifts, dock levellers, and other loading bay equipment.Carrying out mechanical, electrical, and hydraulic fault-finding, part replacement, and urgent breakdown support.Complete scheduled PPM to SLA standards, including inspections, testing, lubrication, adjustments, calibrations, and identifying early wear or safety issues.Ensure all work complies with PUWER, LOLER and company safety procedures.Provide professional customer service, advising on equipment condition and safe operation whilst having clear communication amongst our internal teams.Follow company policies, maintain vehicle and stock to standard, travel regionally/nationally, and carry out reasonable ad-hoc duties.Essential Requirements for a Field Service Engineer/Loading Bay Engineer:High degree of flexibility in working hours and types of jobs undertaken.Excellent communication skills both written and oral.Advanced understanding of Loading Bay Equipment.High degree of mobility travelling throughout the region, and at times throughout the country, as and where directed.Key performance Indicators for a Field Service Engineer:Quality of repairs and maintenance.Quality of documentation and reporting.Speed and efficiency of work.Response to instructions from Operations Centre to meet customer expectations.Flexibility and adaptability to ever-changing job function.Development of engineer, customer and colleague relationships.Company InformationWho are we?Millers Vanguard are proud to have been supporting all the UKs Supermarket chains for over 40 years, in brief, we are the people in the background ensuring that supermarkets keep the Nation fed! Maintaining a wide and varied range of assets from food production equipment through to loading bay lifts.Our service is as follows:Nationwide reactive maintenanceHygienic Deep cleaning & Planned maintenance servicesRefurbishment, logistics and installation of equipmentWe do all of this with the firm foundations of being owned by the global Ali Group, whose turnover is in excess of £4 billion p.a.Our peopleDespite being a large operation here at Millers Vanguard we still firmly believe in running the business like we have done for the last 40 years, by valuing our biggest asset we have YOUthe employee.Our team of over 500 employees have the advantage of working in state-of-the-art working environments:New Technical response centreAward Winning research, Innovation, and recycling facilityIndustry leading Mercedes Benz fleetWe believe in providing you with the very best environment and tools to do the job.Why join us?Job Specific Uniform & tooling for all rolesCompany wide fun days and charity eventsCompany Pension32 Holidays per year including bank holidays.Regular staff treats for employees and their families.Hours: 42.5 hours per week, Monday to Friday, 8:00am5:00pmTPBN1_UKTJ

An exciting opportunity has arisen for a skilled Rail Plant Engineer to join a well-established team based at a busy Stratford depot. This role is ideal for candidates with experience working on Rail-Road Vehicles (RRVs), though applications are also welcomed from experienced heavy plant engineers with strong mechanical and hydraulic knowledge who are looking to transition into the rail sector.The role involves the maintenance, repair, and inspection of a range of specialised rail plant and on-track equipment, supporting key infrastructure and rail projects across the region. This is a great chance to be part of a fast-paced and safety-driven environment with excellent opportunities for ongoing development and training.Rail Plant Engineer - Stratford Job OverviewDepot-based role working on a range of specialised rail plant and on-track machineryFocus on maintenance, diagnostics, and repairs of Rail-Road Vehicles (RRVs) and associated equipmentEnsure all rail plant meets safety, compliance, and operational standardsOpportunity to work on diverse and technically interesting machinery used across key rail infrastructure projectsIdeal for engineers with RRV experience, but open to heavy plant engineers with strong mechanical/hydraulic skillsWork as part of an experienced and supportive engineering teamOngoing training and development available to support progression into rail-specific workRail Plant Engineer - Stratford Job RequirementsProven experience as a Plant Engineer, Rail Plant Engineer, or Heavy Plant FitterExperience working on Rail-Road Vehicles (RRVs) is highly desirable but not essentialStrong mechanical knowledgeNVQ Level 3 in Plant Maintenance or equivalent qualification (preferred but not essential)Familiarity with LOLER, PUWER, and other relevant safety regulations (advantageous but not essential)Ability to diagnose and repair faults efficiently and accuratelyStrong commitment to health & safety and working to high standardsFull UK driving licence required (PTS certification is a plus, but not essential)Willingness to learn and undergo further training for rail-specific equipmentRail Plant Engineer - Stratford Salary & Benefits£18.50-£19.50 an hour dependant on experience40 hour working week (7:30-16:30. 1-hour unpaid lunch break)Overtime available at weekends and evenings paid at £23.00-£24.00 an hour28 days holiday including bank holidaysPensionAccident and life coverCycle to work schemeVan and electric car scheme which are salary sacrificeBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.TPBN1_UKTJ

Senior Civil Design EngineerLocation: Derby, UKType: PermanentMorson are supporting a major UK infrastructure client with the recruitment of a Senior Civil Design Engineer to join a growing capital delivery and design function supporting large-scale infrastructure investment projects.This role will support the development and delivery of civil engineering solutions across a varied capital programme, covering feasibility, outline and detailed design, design assurance, and construction support activities within a regulated environment.Key Responsibilities:• Deliver feasibility studies, civil designs, and technical specifications for infrastructure projects• Coordinate multidisciplinary design activities across civil, structural, mechanical, and electrical interfaces• Review geotechnical, hydraulic, and survey information to support design development• Support CDM compliance and embed health & safety considerations throughout the design lifecycle• Produce and review technical reports, calculations, and construction documentation• Support project delivery teams through technical queries, design clarifications, and contractor engagement• Contribute to risk identification, value engineering, and whole-life cost optimisation activities• Engage with internal stakeholders, consultants, contractors, and regulatory bodiesCandidate Profile:• Degree-qualified in Civil Engineering or similar discipline• Experience delivering civil infrastructure projects within regulated sectors such as water, utilities, energy, or infrastructure• Strong understanding of design coordination, feasibility assessment, and technical documentation• Experience working within CDM-regulated environments• Knowledge of NEC contracts and BIM-led project delivery beneficial• Working toward Chartership with ICE preferredThis is an excellent opportunity to join a long-term infrastructure programme offering career development, technical progression, and involvement in high-value engineering projects across the UK.TPBN1_UKTJ

Due to growth and new contracts, we're looking for an additional Senior Regional Service Engineer to join a dedicated service team, where you'll play a key role in upholding the brand and delivering outstanding service to customers.This is a hands on, field based role, focused on the service and repair of industrial and municipal cleaning equipment. You'll be representing a globally respected company with a strong customer first approach.Location RequirementsThis is a field-based role covering London and surrounding areas . We are open on location and welcome applications from engineers based across the wider London regionKey Responsibilities for the Senior EngineerService, maintain and repair a wide range of cleaning equipmentDiagnose faults and complete accurate service reportsPlan and manage your daily workload with the Service Manager and SchedulerTake ownership of your area, ensuring service standards and performance are metManage van stock and parts effectivelySupport and coach other engineers where neededIdentify potential sales leadsBuild strong, professional relationships with customersWhat You'll NeedStrong experience across electrical, mechanical, hydraulic, pneumatic or diesel equipmentBackground in municipal, FLT, plant hire, HGV or similar industries (ideal)Confident diagnosing complex faults and working independently in the fieldAble to manage your own workload and take responsibility for your areaGood IT skills and experience completing service reportsFull UK driving licenceWillingness to travel, including occasional overnight staysPassport (preferred for possible training in Germany)What's in it for YouSalary up to £41,110OTE £50,000+ with overtimeLondon weighting (£300 per month where applicable)Fully expensed company van (optional personal use)All tools provided25 days holiday + bank holidays + your birthday offPension, health plan, sick pay & critical illness coverEnd of year discretionary bonusStaff discounts and social eventsOngoing training and career developmentTraining & OnboardingYou'll follow a structured 12 week training programme , including factory led courses and hands-on support, working alongside experienced engineers with ongoing development.TPBN1_UKTJ

Start here. Grow here. Are you ready to lead a team of talented engineers and shape the future of water infrastructure? Join our dynamic and multidisciplinary water team as a Principal Civil Engineer in one of our vibrant UK offices – whilst also taking advantage of our flexible hybrid working model. At AECOM, we’re at the forefront of innovation, delivering an exceptional portfolio of water programmes and projects through long-term partnerships with key clients. Our team is engaged in high-profile, industry-leading infrastructure projects both in the UK and internationally. We are working on a variety of significant projects for water and sewerage authorities, local and national governments and other clients. Our operations span all stages of the design and construction process, from feasibility through to design, operation, maintenance, and asset management. We are an industry leader in the application of blue green infrastructure and nature based solutions. Our team is at the leading edge of this growing area of the water industry, with recent projects include being a leading design consultant for Severn Trent’s £76m Mansfield Strategic Flood Resilience Project – the largest Sustainable Drainage (SuDS) retrofit project in the UK; drafting Seven Trent’s Retrofit SuDS Design Manuals as well as authoring the draft National Standards for Sustainable Drainage Systems (SuDS), published in England by the Department for Environment, Food and Rural Affairs. Here’s what you’ll do: • Deliver: Be responsible for the delivery of complex tasks and projects and manage the budget and programme for these tasks and projects. Work proactively and collaboratively to solve engineering problems to deliver benefits to the communities that we serve., • Expertise: Be involved in all design stages including feasibility studies, outline designs, detailed designs, and preparing reports and technical specifications. Ensuring compliance of design with all applicable standards and regulations and provide technical expertise for interdisciplinary analytical studies., • Collaboration: Liaise with clients to develop scope, price proposals and communicate project progress. Work closely with our teams of engineers, hydraulic modellers, environmental scientists and technical specialists to deliver a wide range of drainage and flood risk projects in the UK and overseas to a high level of quality., • Leadership: Lead the technical delivery on a number of projects and be responsible for reviewing work produced by others to ensure timely and accurate results., • Develop: Undertake line manager responsibilities for a number of junior staff, providing guidance and management to them as well as completing performance evaluations for those assigned. Support the development of junior members of the team, managing their input into projects and mentoring them (technical work and ICE / CIWEM). If you're passionate about innovation and turning bold ideas into reality, we want to hear from you! Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come grow with us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland. Collaborate with top-tier engineers and consultants to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. At AECOM, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued - and let's not forget about the perks! You'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, technical practice networks, AECOM University, volunteering days and our flexible hybrid working model to ensure a work-life balance that suits your lifestyle. We recognise that everyone’s circumstances are different, so we’re happy to discuss part-time or flexible working arrangements that suit you. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Bachelor’s degree in civil engineering (or equivalent qualification), or demonstratable equivalent experience., • Proven experience in the delivery and design of sustainable drainage or nature-based solutions at Principal level., • Experience of leading project teams or sub-teams and mentoring and training junior staff., • Chartered/Incorporated or working towards this with a relevant institution e.g. ICE, CIWEM., • Experience of undertaking engineering assessments, options appraisals, engineering calculations and / or economic appraisals., • Experience of outline and / or detailed design of flood risk management / assessment or drainage schemes We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn – Jay Hewitt About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Position: Workshop Plant Engineer Location: Dartford Salary: £24.40 per hour + Overtime Available Join a busy workshop supporting essential equipment for construction and maintenance operations. You'll be part of a skilled engineering team focused on safety, quality and keeping plant running efficiently. Overview • Service, repair and maintain heavy plant, machinery and small tools, • Carry out planned and reactive maintenance, • Diagnose faults, source parts and complete effective repairs, • Work independently or within a team, • Complete all maintenance paperwork accurately, • Follow all health & safety procedures and challenge unsafe practices, • Support general workshop tasks and maintain a clean work area Requirements Essential • Heavy plant experience (mechanical, electrical & hydraulic), • Diagnostic skills (fault finding & repair), • Mig welding/fabrication ability, • Strong communication & teamwork, • Self-motivated with good attention to detail, • Able to work under pressure, • Full UK driving licence Desirable • CSCS Card, • City & Guilds (Levels 1-3), • Experience with cranes or white-lining equipment Salary & Benefits • £24.40 per hour

The ideal Forklift Engineer will have had experience on mobile plant machinery ie) Forklift Trucks with knowledge of hydraulic pneumatic and control systems. To apply for the position of FORKLIFT ENGINEER please send an up-to-date CV to Eva Tilekoussi. The successful candidate will be working on pla

Senior Engineer Modeller Location: Central London Salary: £38,000 - £50,000 Are you an experienced Senior Engineer Modeller looking to take ownership of hydraulic modelling and flood risk projects while mentoring junior staff? This Senior Engineer Modeller opportunity in Central London offers technical responsibility, client exposure and progression within a specialist infrastructure consultancy. A well-established consultancy is seeking a Senior Engineer Modeller to join its Water Team, delivering flood risk, hydraulic modelling and drainage strategies across residential, commercial and public sector developments. This Senior Engineer Modeller role suits someone with 5 to 8 years' consultancy experience who can manage schemes from concept through to construction support. As a Senior Engineer Modeller, you will lead river modelling and hydrological analysis using TUFLOW and InfoWorks ICM, oversee Flood Risk Assessments and guide drainage strategy development. You will mentor junior modellers, review technical work and liaise directly with clients, strengthening your profile as a capable Senior Engineer Modeller. Key responsibilities Lead hydraulic modelling using TUFLOW and InfoWorks ICM Oversee Flood Risk Assessments and drainage strategies Develop flood mitigation designs from concept to detailed stage Manage and mentor junior modellers and engineers * Liaise with clients and support commercial proposals ...

Powered Access Engineer - Monday to Friday - 07:30 to 17:00 - 45 Hours Per Week Speedy are the UKs leading hire provider with the widest range of tools, specialist hire equipment, plant and support services everything for every job! As a Powered Access Engineer you will be responsible for the service, refurbishment, repair and maintenance of our powered access equipment based at our customers sites.We offer our customers the highest level of care, therefore this role will involve attending emergency breakdown calls as well as scheduled service maintenance.You will ensure that our customers are using safe and reliable equipment so that they can count on us to deliver customer excellence. What youll need: • Ideally be CAP registered, • Driving Licence, • Previous experience in working on powered access equipment such as Niftylift, Skyjack, Genie and JLG would be an advantage, • Experience in estimating repairs to be carried out with a keen eye for detail, • Experience in fault finding and diagnostics, • Able to read electrical / hydraulic drawings, understanding both systems, • Previous engineering experience within powered access, • Ability to support your business unit/team to deliver our ESG Strategy Decade to Deliver. What we offer: • 26 days holiday (plus bank holidays), • Private use of company van

Dairy Technical Manager - Automated Milking Systems & Technical Support This role is not eligible for UK Visa Sponsorship - the successful applicant must have existing Right to Work in the UK. Are you an experienced agricultural engineer or dairy equipment specialist looking to work with industry-leading robotic milking technology? Do you enjoy diagnosing and resolving complex electrical, mechanical, hydraulic, pneumatic, and software issues in the field? Would you like a highly autonomous technical role where you can support cutting-edge dairy automation systems while helping farmers maximise performance and reliability? Location of the Job: United Kingdom & Ireland (Home-Based with Extensive Travel) Salary & Benefits Package: Competitive Salary (depending on experience) Company vehicle Laptop and mobile phone Comprehensive training programme Long-term career development opportunities High degree of autonomy and responsibility Opportunity to work with market-leading automated milking technology On-call allowance and support package About the Company: Our client is a globally recognised manufacturer of advanced dairy equipment and automated milking systems, with more than 85 years of experience supporting dairy farmers worldwide. The business is committed to delivering innovative solutions that balance technology, animal welfare, and farm profitability. Due to continued growth within the automa...

The Rewards and Benefits on offer: A full time and Permanent contract from day 1! Immediate Starts Available. Company bonus structure Working with blue chip organisations/clients. Free On-site Parking. Company Pension Scheme. Holiday entitlement + Stats. Mtrec’s New Job Opportunity: MTrec Technical are delighted to be recruiting on behalf of a leading precision engineering and manufacturing organisation, seeking a Thermal Applications Engineer to join their growing team. This is a fantastic opportunity for experienced engineers to work as part of a specialist engineering business and provide bespoke technical solutions to their customer base. Apply now for an immediate response! The Job you will do: Provide expert pre-sales and post-sales technical support for bespoke engineer solutions in data centre environments. Act as the technical authority and customer-facing expert for technical systems Enable successful design-in, deployment, operation, and optimization of systems across hyperscale, colocation, and enterprise data centres. Bridge customer requirements with internal engineering, product management, and manufacturing teams. Deliver remote technical support during installation, commissioning, and troubleshooting. Review customer mechanical, thermal, and hydraulic designs and provide recommendations. Conduct technical presentati...

Bexley, Greater London Temporary HGV Technician Monday to Friday 45 hours per week Umbrella – up to £38 ph PAYE - £25 ph Questech Automotive Recruitment are recruiting on behalf of one of Europe’s biggest Automotive groups who are looking to recruit for a Temporary Workshop Technician at their Bexleyheath site. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background with at least 2 years experience in the Industry. You will be Apprentice trained to Level 3 or equivalent that has experience working with a variety of LGV or HGV vehicles. You will be Apprentice trained to Level 3 or equivalent that has experience working with a variety of LGV or HGV vehicles. The role: Electrical, mechanical and hydraulic fault diagnosis, repair and installation of parts Setting and operating of machine tools and equipment onsite Support workshops team members including Apprentice Technicians as required. Accurately record time to complete job cards and associated details in accordance with DVSA. Use of skills and performance of other work within normal grade/job skills as required by the Workshop Supervisor to maximise workshop efficiency Skills & Experience: Level 3 Motor Vehicle Mechanics City & Guilds/NVQ or equivalent. Previous experience as a qualified Fitter/Mechanic/Engineer Possession of own tools If you feel you wo...

CAP Qualified Powered Access Engineer (Door-to-door pay) £40,000 - £50,000 + Van (Personal use) + Unlimited Overtime + Training + Progression Company Benefits Maidstone (Home Counties) Are you a CAP-qualified Powered Access Engineer ready to join a fast-growing company offering a company van, extensive overtime opportunities, and long-term career progression across the Home Counties? Established in 2021, this rapidly growing company specialise in the hire and maintenance of powered access equipment across the UK. With a fleet of over 1,000 machines and a turnover of approximately £25 million, they work with clients across the construction, industrial, and facilities management sectors whilst continuing to expand through new depots nationwide. In this role, you will carry out servicing, maintenance, inspection, and testing on a wide range of powered access equipment. You will complete both planned preventative maintenance and reactive breakdown repairs, working across customer sites throughout the Home Counties region. This role would suit a Powered Access Engineer with a CAP licence looking for a varied field-based role within a rapidly expanding company, offering unlimited overtime, long-term progression, and the opportunity to work across a wide range of equipment throughout the Home Counties. The Role: Service, maintain, inspect and test a range of powered access equipment Carry out planned preventative maintenance and reactive breakdown repairs (50/50) Diagnose and repair mechanical, electrical and hydraulic faults The Person: Proven experience as a Powered Access Engineer or similar role CAP licence or on your way to license Mechanical and Electrical Background Full UK driving licence with willingness to travel across the Home Counties Reference: BBBH25399B Powered Access Engineer, CAP Qualified, Mobile, Field Service, Plant Hire, Access Platforms, MEWP, Scissor Lift, Boom Lift, Cherry Picker, Hydraulic Systems, Electrical Fault Finding, Mechanical Repairs, Maidstone, Kent, Ashford, Medway, Tonbridge, Tunbridge Wells, Home Counties If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

An excellent opportunity has arisen for an experienced Workshop Engineer to join a busy and growing engineering team based in Barking. This role would suit somebody with a strong background within plant hire, heavy plant, construction equipment, powered access, forklifts or mechanical engineering environments looking for a stable, long-term position with strong overtime opportunities and progression. The successful candidate will be responsible for carrying out servicing, maintenance, diagnostics and repairs on a wide range of plant and hire equipment within a workshop environment. • Carrying out servicing, maintenance and repairs on plant and hire equipment, • Diagnosing faults across mechanical, hydraulic and basic electrical systems, • Completing planned preventative maintenance (PPM), • Conducting inspections and pre-delivery inspections (PDIs), • Attending to breakdown repairs and ensuring equipment is returned to service efficiently, • Preparing equipment ready for hire, • Completing all service paperwork and workshop documentation accurately, • Maintaining high workshop and health & safety standards, • Liaising with parts departments and workshop management teams regarding repairs and ongoing work

Service Engineer Up to £44,000 plus £2,000 London waiting London and surrounding area Full time, Monday to Friday 8:00 – 17:00 Do you have working knowledge of steam, pneumatic, hydraulic and electrical/electronic control systems? Do you have any of the following tickets STM4 | HTM2030 | HTM01 | ENG05 | ENG12 Attega Group is currently partnering exclusively with our client who are a leading, expert provider of disinfection, sterilisation & decontamination solutions in recruiting a Service, Test and Repair Engineer. In return, our client is offering a salary of up to £48,000 P/A, depending on experience, plus 25 days holiday plus bank holidays, annual company performance related bonus and bi-annual company social events! Reporting to the Technical Service Manager, your responsibilities will be: Attend reactive callouts to breakdowns Diagnose and repair broken down equipment Support to Service & Test team in the event of machines breakdowns during routine service and test Commission and Validate autoclaves and washers to prevailing standards or procedures at customers sites, including report generation Provide excellent customer service and support in person, by phone and email The ideal candidate: Working knowledge of autoclave and washer disinfector service, testing and repair principles and techniques Ability to fault find in both mechanical and electrical systems (electr...

Contract Mechanical Design Engineer needed to support the design and manufacture of bespoke lifting, winching and hydraulic systems. Proven experience as a Mechanical Design Engineer. This is an immediate requirement for a Mechanical Design Engineer offering £30£40 per hour depending on experience

Powered Access Engineer (CAP Qualified) £40,000 - £50,000 + Van (Personal use) + Unlimited Overtime + Training + Progression Company Benefits Slough (Home Counties & Heathrow Patch) Are you a Powered Access Engineer with a CAP licence looking to join a rapidly expanding company where you will travel across the Home Counties in your own company van, benefit from unlimited overtime, and grow your career as the business continues to expand? Established in 2021, this rapidly growing company specialise in the hire and maintenance of powered access equipment across the UK. With a fleet of over 1,000 machines and a turnover of approximately £25 million, they work with clients across the construction, industrial, and facilities management sectors whilst continuing to expand through new depots nationwide. In this role, you will carry out servicing, maintenance, inspection, and testing on a wide range of powered access equipment. You will complete both planned preventative maintenance and reactive breakdown repairs, working across customer sites throughout the Home Counties region. This role would suit a Powered Access Engineer with a CAP licence looking for a varied field-based role within a rapidly expanding company, offering unlimited overtime, long-term progression, and the opportunity to work across a wide range of equipment throughout the Home Counties. The Role: • Service, maintain, inspect and test a range of powered access equipment, • Carry out planned preventative maintenance and reactive breakdown repairs (50/50), • Diagnose and repair mechanical, electrical and hydraulic faults The Person: • Proven experience as a Powered Access Engineer or similar role, • CAP licence or on your way to license, • Mechanical and Electrical Background, • Full UK driving licence with willingness to travel across the Home Counties Reference: BBBH25399 Powered, Access, Engineer, CAP, Qualified, Mobile, Field, Service, Plant, Hire, Access, Platforms, MEWP, Scissor, Lift, Boom, Cherry, Picker, Hydraulic, Systems, Electrical, Fault Finding, Mechanical, Slough, Reading Berkshire, Wycombe, Watford, Heathrow If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Mobile Maintenance Engineer (Forklifts) £40,000 - £44,000 + Overtime + Door-to-Door Pay + Bonus + Training + Company Vehicle + Fuel Card Slough Are you a Field Service Engineer with experience in mechanical, electrical or hydraulic systems, looking for a well-paid, local patch role with door-to-door pay and strong earning potential? On offer is an excellent opportunity to join a growing materials handling company that invests in its engineers through ongoing training and support. You will work across a localised patch, servicing and repairing a range of forklifts and associated equipment, with a strong focus on first-time fixes and customer satisfaction. Due to continued expansion, the company is looking to recruit a skilled and motivated Field Service Engineer to strengthen their team across the Slough and M4 corridor area. This role would suit an engineer with a background in plant, forklifts, automotive, or similar equipment who is confident working independently in the field and wants a stable, long-term position with good earning potential. The Role: • Service, maintenance, and repair of forklifts and materials handling equipment, • Diagnose faults across mechanical, electrical, hydraulic, and electronic systems, • Attend breakdowns and complete planned preventative maintenance, • Work closely with customers to ensure minimal downtime The Person: • Field Service Engineer working on Forklift Trucks or similar, • Experience with mechanical, electrical, or hydraulic systems, • Full UK driving licence, • Based around Slough, Maidenhead, or North of Reading If you are a Service Engineer, Forklift Engineer, Plant Engineer, or Mobile Technician looking for your next role, apply now. Keywords: Field Service Engineer, Forklift Engineer, Plant Engineer, Service Engineer, Mobile Engineer, Mechanical Engineer, Electrical Engineer, Materials Handling Reference: BBBH 25589 We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will depend on your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying, you accept our T&Cs, Privacy Policy and Disclaimers. JBRP1_UKTJ

Field Service Engineer (Forklift Trucks).Overtime + Door-to-Door Pay + Bonus + Training + Company Vehicle + Fuel Card.Are you a Field Service Engineer with experience in mechanical, electrical or hydraulic systems, looking for a well-paid, local patch role with door-to-door pay and strong earning po

Mobile Powered Access Engineer (CAP Qualified) £40,000 - £50,000 + Van (Personal use) + Unlimited Overtime + Training + Progression Company Benefits Maidstone (Home Counties) Are you a Powered Access Engineer with a CAP licence looking to join a rapidly expanding company where you will travel across the Home Counties in your own company van, benefit from unlimited overtime, and grow your career as the business continues to expand? Established in 2021, this rapidly growing company specialise in the hire and maintenance of powered access equipment across the UK. With a fleet of over 1,000 machines and a turnover of approximately £25 million, they work with clients across the construction, industrial, and facilities management sectors whilst continuing to expand through new depots nationwide. In this role, you will carry out servicing, maintenance, inspection, and testing on a wide range of powered access equipment. You will complete both planned preventative maintenance and reactive breakdown repairs, working across customer sites throughout the Home Counties region. This role would suit a Powered Access Engineer with a CAP licence looking for a varied field-based role within a rapidly expanding company, offering unlimited overtime, long-term progression, and the opportunity to work across a wide range of equipment throughout the Home Counties. The Role: Service, maintain, inspect and test a range of powered access equipment Carry out planned preventative maintenance and reactive breakdown repairs (50/50) Diagnose and repair mechanical, electrical and hydraulic faults The Person: Proven experience as a Powered Access Engineer or similar role CAP licence or on your way to license Mechanical and Electrical Background Full UK driving licence with willingness to travel across the Home Counties Reference: BBBH25399A Powered Access Engineer, CAP Qualified, Mobile, Field Service, Plant Hire, Access Platforms, MEWP, Scissor Lift, Boom Lift, Cherry Picker, Hydraulic Systems, Electrical Fault Finding, Mechanical Repairs, Maidstone, Kent, Ashford, Medway, Tonbridge, Tunbridge Wells, Home Counties If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Join a world-leading name in crane technology and build your Service Engineer career directly with the manufacturer. Palfinger UK is expanding its flagship Dartford operation and now hiring two new team members to join one of the worlds leading lifting technology manufacturers. As a Service Engineer, youll work with premium crane systems inside a modern 13,000 sq ft facility fitted with advanced diagnostics, specialist tooling and eight fully equipped workshop bays. This is an opportunity to join a manufacturer that genuinely invests in its people, supports long-term progression and provides accredited training directly from the brand itself. Whether your background is in cranes, plant, forklifts, powered access, HGVs or agricultural machinery, this role offers a chance to specialise within a respected global business. Whats in it for you • Salary up to £45,760 depending on experience and capability, • Annual pay reviews, • Company pension contributions up to 12.5%, • Ongoing Palfinger manufacturer and ALLMI accredited technical training, • Career progression opportunities across a large UK engineering organisation, • Perkbox rewards, wellbeing support and staff discount schemes, • Company share plan and life assurance up to 5x salary Your responsibilities as Service Engineer • Carry out planned maintenance and repairs on Palfinger and Epsilon crane systems, • Diagnose mechanical, hydraulic, electrical and software faults, • Complete LOLER inspections and required safety checks, • Use manufacturer diagnostic systems to identify and resolve issues efficiently, • Maintain high standards of workmanship and compliance, • Contribute to a professional, safety-focused workshop environment What were looking for • Previous experience as a Service Technician working on hydraulic or lifting equipment, • Background within cranes, forklifts, plant, powered access, HGVs or agricultural machinery, • Recognised qualification such as NVQ or City & Guilds in a relevant discipline, • Strong fault-finding ability across mechanical and hydraulic systems, • Professional attitude with a strong focus on quality and safety, • Ability to work full-time on-site in Dartford, Monday to Friday Palfinger UK continues to invest heavily in its facilities, technology and people, creating an environment where skilled workshop professionals can build long-term careers with genuine opportunities for progression and specialist product training. Apply online today to start your next chapter with Palfinger UK as a Service Engineer. JBRP1_UKTJ

Lead Electrical Design Engineer Location: Southampton Salary: £60-65k + Benefits + £5k Relocation if needed The Role We are seeking a highly capable Lead Electrical Design Engineer to join a dynamic, multidisciplinary engineering team delivering innovative, bespoke industrial equipment to a global customer base. Reporting to the Head of Engineering, you will act as the technical authority for all electrical and electronic aspects of projects. Youll collaborate across disciplines to define system architectures, requirements, and specifications, ensuring solutions are safe, compliant, and technically robust. The Company A specialist engineering organisation based in Southampton, delivering bespoke industrial solutions to a global market. The company focuses on high-value, technically challenging projects involving electrical control systems, and integrated mechanical material handling solutions. Projects typically range from £50k to £500k+, with delivery timelines spanning 312 months, covering the full lifecycle from concept to commissioning. Key Responsibilities Lead the design, development, manufacture, and support of advanced industrial electro-mechanical equipment. Coordinate electrical engineering activities, delivering projects on time, within budget, and to the highest quality standards. Own the electrical design lifecycle from concept through to verification and release. Contribute to system-level design decisions and cross-functional trade-offs. Approve and sign off electrical design documentation and outputs. Drive innovation and continuous improvement, troubleshooting and optimising existing designs while exploring new technologies. Develop strong technical knowledge to support customer and stakeholder engagement. Technical Skills & Experience Strong background in electrical and electronic systems engineering, including power conversion, transformers, switches, converters, and SMPS. Experience in system architecture and requirements definition. Knowledge of industrial automation, control systems, and industrial software. Understanding of thermal management and material considerations in industrial equipment. Desirable: Control panel design (PLC, HMI, SCADA) and programming Pneumatic or hydraulic systems Experience mentoring or leading a small team of engineers Chartered Engineer status (or working towards) Compliance, Safety & Standards Lead or contribute to CE marking activities Interpret and apply relevant standards (e.g. Low Voltage Directive, EMC) Ensure robust design reviews, safety compliance, and documentation Project & Commercial Involvement Provide technical input to new business proposals, including risk assessment Collaborate closely with engineering teams to ensure integrated product delivery Support commissioning, testing, and troubleshooting of new equipment Candidate Profile Degree-qualified (or equivalent) in Electrical Engineering Proven experience in industrial or process-based equipment design Strong problem-solving skills with a hands-on, project-driven mindset Able to operate as a technical leader within a collaborative environment The Opportunity This is a rare opportunity to take on a high-impact technical leadership role within a specialised engineering environment. Youll influence product direction, safety, and long-term engineering capability while working on complex, custom-built solutions for a global client base. If youre ready to lead cutting-edge electrical design projects and make a tangible impact, wed love to hear from you. JBRP1_UKTJ

Job Title: Drainage Engineer Location: Field Based across London and the South East Salary: £28,000 - £36,000 per year depending on experience + Company Van, Fuel card & Phone provided Job Type: Full time, Part Time, Permanent About The Company: At Clear Rod we are a Kent based non-franchise, family run business who have years of experience in providing comprehensive drainage solutions to satisfied customers. We can help customers in both the commercial and domestic sector with any of their drainage issues 24/7 365 days a year. About the Role: We are looking for a drainage engineer to join our team based in Sidcup in Kent, we work for commercial and domestic clients in London and the South East (all within the M25). Key Responsibilities: • Carry out drain clearances, to internal and external drainage systems., • Use of high pressure water jetting, • Carry out and assist in drainage CCTV surveys., • Carry out Rotary Mechanical Machining (Able to unblock internal blockages, such as sinks, toilets, baths etc) Reactive plumbing works - replace taps. Remove toilets for access, investigate leaks etc Have high standards of communication skills, both written and oral., • Troubleshoot and resolve drainage system issues in a timely manner, • All work uploaded to phone, no paperwork. Overtime potential and occasional weekend working About you: Experience: • 5 years experience is essential, • Experience in high pressure water jetting, • Experience with CCTV surveys, • Experience with Rotary Mechanical Machining/de-scaling, • Experience in reactive light plumbing duties, • Have a positive, flexible, can-do attitude, • Full UK driving license Schedule: • Monday to Saturday - day off in week., • Weekend overtime availability also. Please click on the APPLY button to send your CV along with a cover letter detailing you experience and qualifications for this role. We look forward to reviewing your application. Candidates with the experience and relevant job titles of: Drainage service Engineer, Stormwater Engineer, Water Resources Engineer, Hydrologist, Civil Engineer (Drainage), Environmental Engineer (Drainage), Water Jetting Engineer, Hydraulic Engineer, Mechanical Engineering may all be considered. JBRP1_UKTJ

The Role An opportunity has arisen for a skilled and proactive Maintenance Engineer to join a well-established manufacturing business. Working as part of a close-knit engineering team, you will play a key role in planned maintenance, reactive support, and continuous improvement initiatives to keep production running smoothly. You'll be working on Panama shift rota (2-week rotation covering days and nights, 2-2-3 pattern). Key Duties • Perform planned preventative maintenance (PPM) activities across plant machinery and equipment, • Provide a rapid and effective response to breakdowns to minimise operational downtime, • Identify and resolve faults across mechanical, electrical, and hydraulic systems, • Work closely with production teams to ensure optimal machine performance, • Assist with improvement initiatives, including upgrades and process enhancements, • Accurately log maintenance activity and ensure adherence to health & safety procedures About You • Hold a recognised engineering qualification (mechanical, electrical, or multi-skilled), • Experienced within a manufacturing or industrial maintenance environment, • Strong diagnostic and problem-solving capability, • Comfortable working under pressure in a fast-paced setting, • Proactive approach with a focus on continuous improvement, • Strong communication skills with the ability to work both independently and within a team, • Flexible approach to working hours, including occasional additional cover when needed What's on Offer • Healthcare cash plan, • Employee Assistance Programme, • Life assurance (4x salary), • 6% employer pension contribution, • Annual profit share scheme, • Discounted gym membership = other lifestyle benefits The Business This is a globally recognised manufacturing organisation with a strong track record of innovation, quality, and customer focus. Operating across multiple international sites, the company offers long-term stability, ongoing investment in technology, and genuine opportunities for career development within a supportive and collaborative environment. Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates JBRP1_UKTJ

Engineering Manager / Site Manager / Branch Manager required to join a global, leading engineering supplier. The successful Engineering Manager / Site Manager / Branch Manager will be responsible for leading a team of Sales Engineers, Supply Chain, and General Engineering teams. This role will focus on overseeing day-to-day operations, ensuring seamless collaboration between teams, driving efficiency, and supporting the successful delivery of various pneumatic & hydraulic products and solutions, plus managing relationships with existing customers and distributors while developing new business opportunities in the Fluid Power sector. The Engineering Manager / Site Manager / Branch Manager Role must have a proven ability to lead and inspire engineering teams, drive performance, and implement high-quality standards. You will ideally have a background in fluid power, specifically Pneumatics & hydraulics, or related sectors. We are looking for a dynamic manager who can enhance operations, optimise team performance, and deliver impactful results. Package: £50,000 - £60,000 depending on experience 25 days holiday + Bank Holidays Company pension Company Car Bonus Additional benefits Engineering Manager / Site Manager / Branch ManagerRole: Lead, mentor, and manage a team of Sales Engineers, supply chain, and general engineering teams within fluid power, specificallyhydraulics and pneumatics. Drive team performance and optimise operations to meet company objectives. Manage relationships with existing customers and distributors while developing new business opportunities in the Fluid Power sector. Maintain effective inventory management, stock control, and logistics to ensure smooth operations. Liaise with various engineering departments. Handle fluid power sales-related activities, including providing product demonstrations, attending exhibitions, and negotiating sales. Site-based near Basingstoke Engineering Manager / Site Manager / Branch ManagerRequirements: Proven experience as a Branch Manager, Depot Manager, Operations Manager, Engineering Manager, Site Manager, Sales Manager or in a similar leadership role within an engineering environment. Experience with Pneumatics and Hydraulics is essential. Knowledge of Fluid Power products, such as Valves, Pumps, Filtration, Compressors, Vacuum Systems, Blowers, Motors, or similar mechanical engineering products, is highly desirable. Experience leading, mentoring, and motivating teams to deliver impactful results for hydraulic solutions. Solid experience in managing day-to-day operations, including sales, customer service, inventory control, and logistics. Sales Manager, Account Manager, Service Manager, Design Manager or Internal Sales Engineer looking to step up into a Site Manager role will also be considered. Ability to commute to Basingstoke daily. An engineering degree or equivalent qualifications are advantageous. TPBN1_UKTJ

K.A.G. Recruitment are excited to be working on an exclusive career opportunity for our client, a leading Food Manufacturer who have an amazing opportunity available for an experienced Multi-skilled Engineer to join our client one of Europe's leading privately-owned food processors at their site in Shrewsbury. Job Title: Multi Skilled Engineer Location: Shrewsbury Salary: £44,120 - £47,099 (DOE) Hours of Work: Monday to Friday - 5am to 1 30pm As a Site Engineer you will possess a strong technical knowledge and be seen as the shift expert in at least one area of the factory or type of machinery. Working as a member of your shift team you will be responsible for maintaining the equipment OEE and minimising downtime. You will be accountable to the Engineering Manager/Assistant Managers but will report into and receive direction from your Engineering Supervisor regarding the day to day activities you will undertake. Duties & Responsibilities Record and log maintenance requests and fault repairs, attend breakdowns and repair in a timely and controlled manner. Progress reporting to Engineering Management / Supervisor Must be proactive to complete scheduled work plans, start-up checks etc. in a timely manner Carryout special projects as required by the Engineering Management team Comply with health and safety and food safety legislation Liaise with the production team to ensure we supply our customer in a timely manner It would be highly advantageous to have experience within Food Process Machinery You will also ideally have completed an apprenticeship or an equivalent formal training programme in installation and maintenance that includes relevant practical experience. You will be an excellent communicator with the ability to take direction and challenge in a professional manner along with proven experience of planned maintenance systems, breakdown maintenance and installations and knowledge of hydraulic and pneumatic systems. It is highly advantageous that you have experience working within a fast-paced manufacturing environment. TPBN1_UKTJ

Multiskilled Maintenance Technician Elec Bias Telford Permanent Negotiable depending on experience Monday to Friday 40 hrs per week Double days (rotating Monday Friday) We are currently recruiting for a well-established global manufacturer in Telford who are looking for an experienced Multiskilled Maintenance Technician to join the business. As the Multiskilled Maintenance Technician you will be responsible for supporting with machine breakdowns, reacting to any mechanical and electrical faults, supporting with preventative maintenance tasks, and equipment installations. We are looking for someone who is multiskilled, ideally electrically biased with pneumatic, hydraulic and PLC knowledge who has experience working within fast paced manufacturing environments. The Multiskilled Maintenance Technician will be responsible for: Maintaining and repairing plant machinery and equipment onsite, including facilities Working on planned and preventative maintenance tasks Attending to breakdowns in a timely fashion and repairing mechanical, electrical, and robotic equipment Supporting with the installation on new machinery onsite Fault finding on PLCs Communicating all information thoroughly across all shifts and departments Adhering to all health and safety and environment legislation at all time Skills and Experience Multiskilled Ideally Electrically bias Electrical qualification would be advantageous Experience fault finding and repairing pneumatics, hydraulics and ideally PLCs and robots Previously worked in a high-volume manufacturing environment such as food manufacturing, FMCG or Automotive This role would suit a candidate with previous experience in roles such as Multiskilled Maintenance Technician / Multiskilled Maintenance Engineer / Maintenance Engineer / Maintenance Technician / Maintenance Technician Elec Bias / Maintenance Engineer Elec Bias / Reliability Engineer The application process: Our mission is to support our clients in their creation of an equal, diverse and inclusive workforce. We are committed to providing a barrier-free recruitment process, so if you require any reasonable accessibility adjustments within the application process, then please make it known at the earliest opportunity. We will carefully consider your details and advise you if we're able to progress with your application within 72 working hours .If you do not hear from us within this time your details wont be retained. So, if you're not successful on this occasion, do continue to respond to future roles we advertise. In the meantime, all good wishes and continued success with your search for employment. About Us Prince Personnel are an employment agency working on behalf of our client.Whether youre seeking a new permanent position, temporary assignment or contract youll find us easy to deal with.Located in thriving Telford, we focus on jobs in Shropshire, Staffordshire and North Wales.Prince Personnel specialise in commercial, accounts and finance and technical recruitment.With the best jobs around we are an independent agency working hard for you. Reference: AA26965 TPBN1_UKTJ

Role – Maintenance Engineer Salary – up to £50,000 Location – Bellshill / Glasgow Shift Pattern – DOUBLE DAYS - Monday to Friday Benefits – Good Pension Contribution, Excellent Training, Life Assurances and Employee Perks The Company A well established and reputable company whose turnover is in excess of £10m, which in turn offers incredible stability and security within the industry.As a market leader that is constantly evolving and growing as a business, and have invested over £millions to bring some of the latest automation and technology to site.They provide over different quality products to their clients, with a healthy and growing order book meaning there may be more investments to keep up with demand. They believe in investing in the business as well as their people to keep them above there competition. Additionally, the business offers fantastic training opportunities for their Engineers, including engineers development, OEMs regularly being called tosite for detailed training and Health & Safety Training. They are looking for an experienced Maintenance Engineer who is looking to make an instant impact on a site and contribute to the growth of the business through hard work, commitment and dedication. The Role Your day-to-day responsibilities as a Maintenance Engineer will include: Working as part of a team of engineers, responsible for the planned and reactive maintenance and service of all the state-of-the-art kit on site, as well as continuous improvement tasks. Working on VFD, Three Phase Motors, working in panels with sensors, relays, contactors, inverters, fuses, power supplies, breakers, switches Reading through electrical schematics, utilizing electrical test equipment such as multi-meters and fault finding on panels. Mechanically – replacing worn out parts on the conveyors which will include rollers, bearings and pulleys. Also working on Gearboxes, Shafts, Belts, Pneumatic and Hydraulic systems Swapping both electrical and mechanical components like for like with the odd strip and rebuild project, Working with latest technology working with a CMMS utilising the tablet-based PPM and reactive work The Person To succeed in this role, you should have: A recognised engineering qualification (ideally electrical) Proven maintenance experience in an industrial environment (ideally FMCG, FOOD, Pharmaceutical, Manufacturing, Packaging, Utilities) Strong electrical and mechanical fault-finding skills with a focus on root cause analysis PLC experience (advantageous but not essential) The ability to work independently and as part of a team and as part of a team ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

An opportunity has arisen for an experienced and proactive Maintenance Engineer to join a well-established manufacturing business. Backed by 10+ years of hands-on maintenance experience , you will play a key role within the engineering team, driving equipment reliability, supporting continuous improvement, and mentoring junior engineers. Key Duties Carry out planned preventative maintenance (PPM) across a range of plant machinery and equipment Provide a rapid and effective response to breakdowns , minimising downtime Diagnose and resolve faults across mechanical, electrical, pneumatic, and hydraulic systems Take ownership of more complex fault-finding and recurring issues , applying root cause analysis Support continuous improvement activities , including upgrades and process optimisation Work closely with production to ensure maximum machine performance and uptime Accurately log maintenance activity and ensure adherence to health & safety standards Contribute to improving maintenance processes, reliability, and asset performance About You 10+ years' experience in a manufacturing or industrial maintenance environment Recognised engineering qualification (mechanical, electrical, or multi-skilled) Strong diagnostic and fault-finding capability across multiple disciplines Experience dealing with complex breakdowns and recurring faults Proactive approach with a focus on continuous improvement and reliability Comfortable working in a fast-paced production environment Strong communication skills with the ability to work both independently and within a team Flexible approach to working hours, including additional cover when required What's on Offer Healthcare cash plan Employee Assistance Programme Life assurance (4x salary) 6% employer pension contribution Annual profit share scheme Discounted gym membership + other lifestyle benefits If you're a seasoned Maintenance Engineer looking for your next challenge in a market leading manufacturer, apply today! Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates TPBN1_UKTJ

The Opportunity: Field Service Engineer Contract: Permanent Location: Liverpool The Briggs Equipment Group is a leading provider of asset management and maintenance solutions across the UK and Ireland. If you don't feel like you meet all of the role criteria outlined below please don't let that discourage you from applying. The Impact you will have: Attending customer locations to determine the likely scope of the work required, assessing and agreeing with the end user his/her work priorities, ensuring safe working practices are adhered to. Both at outset and as work progresses, liaise with controller and customer on the range of expected work providing clarity and understanding by all parties the likely timescales and associated costs are understood. Identifying the root cause of a breakdown in a timely manner and ensure the correct parts are obtained in the most cost-effective way. Use any available resources to achieve this, including when required the Briggs Technical team Ensuring all work complies with engineering standards and, as relevant, Briggs/manufacturer specification/tolerances. Carrying out inspection/checks on own work as it proceeds and ensuring that the equipment performs satisfactorily and is safe before handing back to the customer. Identifying any further work required on a machine and ensure the customer is made aware of the fact, especially where a cost to the customer is to be incurred. The engineer should ensure that they maximise and potential revenue for equipment that has been damaged. Completing all related job and service documentation is correctly, with necessary signatures/documents obtained from the customer. What will help you to excel in this role: Relevant technical qualification Previous experience within a similar role Good understanding of hydraulic, mechanical and electrical principals The ability to work independently and under pressure The ability to manage and prioritise workload Understanding customer needs What you can expect from us: 40 hour working week Overtime is payable at x1.5 Monday – Saturday and x2 on Sunday 25 days holiday with the ability to buy an extra 3 days (subject to conditions) Vehicle is available for private use if desired (tax to be paid) Future development and career opportunities Contributory pension scheme with employer contributions up to 6% Profitshare bonus based on business performance Paycare and eyecare health scheme High street discounts What's next If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met TPBN1_UKTJ

WORKSHOP ENGINEER Location: Barking Salary: £38,000 - £40,000 + Overtime + Benefits Job Description An excellent opportunity has arisen for an experienced Workshop Engineer to join a busy and growing engineering team based in Barking. This role would suit somebody with a strong background within plant hire, heavy plant, construction equipment, powered access, forklifts or mechanical engineering environments looking for a stable, long-term position with strong overtime opportunities and progression. The successful candidate will be responsible for carrying out servicing, maintenance, diagnostics and repairs on a wide range of plant and hire equipment within a workshop environment. Responsibilities Carrying out servicing, maintenance and repairs on plant and hire equipment Diagnosing faults across mechanical, hydraulic and basic electrical systems Completing planned preventative maintenance (PPM) Conducting inspections and pre-delivery inspections (PDIs) Attending to breakdown repairs and ensuring equipment is returned to service efficiently Preparing equipment ready for hire Completing all service paperwork and workshop documentation accurately Maintaining high workshop and health & safety standards Liaising with parts departments and workshop management teams regarding repairs and ongoing work Equipment May Include Excavators Dumpers Rollers Telehandlers Forklifts Compressors Generators Small and Large Plant Equipment Requirements Previous experience within plant hire, heavy plant or construction equipment industries Strong mechanical fault-finding ability Knowledge of hydraulic systems Basic electrical diagnostic experience advantageous Ability to work independently and within a team environment Strong attitude towards health & safety Full UK Driving Licence preferred Relevant engineering qualifications advantageous (NVQ, City & Guilds, Plant Maintenance etc.) Package £38,000 - £40,000 basic salary Overtime opportunities Company pension Ongoing training and development Long-term progression opportunities Stable and growing business Immediate starts available If interested apply / email CV to or ring 07973205733 TPBN1_UKTJ

Safran Electrical & Power is one of the world's leaders in aircraft electrical systems. It is a key player in the equipment electrification & in the electric and hybrid propulsion sector. Mastering the on-board energy system, the company designs and provides modular, innovative and optimised architectures and solutions. At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation. Test and Development Engineer Pitstone, Buckinghamshire On Site Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers *Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our R&D Test team as a Test and Development Engineer at our Pitstone site. Your Role As a Test and Development Engineer at Safran Electrical & Power you will work with the latest in aerospace technology to plan, organise and execute testing to support the development and qualification tests performed on Safran products. You will support maintenance of the current and qualification testing capabilities, ensuring the team is always a step ahead with innovative testing processes and systems. You will perform data analysis of test results, utilising your analytical capabilities to assess trends in the data and identify any product concerns, offering solutions to any issues. Performing Electrical, Mechanical development and qualification tests on Safran electrical and Power products using high speed drives in conjunction with electrical, electronic and mechanical equipment and analogue and digital instrumentation. Carry out mechanical and electrical testing of Safran Group products. Mechanical equipment maintenance and installation. Hydraulic circuit construction, using solid and flexible piping. Installing system wiring in test cells, both high and low current. Modify existing test rigs to accept new equipment / components. *Mechanical assembly of prototypes / development units. What You'll Bring An Engineering-related qualification (mechanical or electrical) and experience in electrical or mechanical development activities. Ability and knowledge of test rig assembly and testing using a range of laboratory instrumentation and computer packages. A level of development / certification knowledge and experience e.g. basic understanding of aspects of Development Engineering including Compliance Verification, Technical Risk, compilation of technical documentation, and use of instrumentation. Able to follow procedures and clear instructions whether working independently or as part of a team. Have a positive attitude and flexible, proactive approach to all aspects of work. Ability to work under pressure to meet program deadlines. Desirable - A basic knowledge of rotating machines, 3 stage and permanent magnet machines Desirable - Experienced in Data Acquisition System and Analysis tools (i.e. Dewesoft, Labview & DasyLab) TPBN1_UKTJ

Mechanical Maintenance Engineer Bacup, Lancashire £35,000 - £45,000 per annum (DOE) Monday Friday Days Permanent, Full-Time About the Company - Mechanical Maintenance Engineer My client is one of the UK's leading manufacturers. Operating from its modern manufacturing facility, they continue to invest in its people, processes, and equipment to maintain its reputation for quality and innovation. Due to continued growth, I am looking to recruit a skilled Mechanical Maintenance Engineer to join the engineering team. The Role - Mechanical Maintenance Engineer As a Mechanical Maintenance Engineer , you will play a key role in maintaining and improving production machinery across the site. Working within a fast-paced manufacturing environment, you will be responsible for ensuring plant reliability, minimising downtime, and supporting continuous improvement initiatives. This is a days-based role offering excellent work-life balance and the opportunity to work on a variety of manufacturing and automated equipment. Key Responsibilities Carry out planned preventative maintenance (PPM) across manufacturing and production equipment Respond to mechanical breakdowns and diagnose faults efficiently Maintain and repair conveyors, gearboxes, bearings, chains, belts, rollers, pumps, and motors Work on pneumatic and hydraulic systems Conduct machinery inspections and condition monitoring activities Support machine installations, modifications, and improvement projects Read and interpret engineering drawings and technical documentation Assist with root cause analysis and implement corrective actions Ensure maintenance records and documentation are completed accurately Work closely with production teams to maximise equipment availability and performance Maintain high standards of health, safety, and housekeeping What We're Looking For NVQ Level 3, City & Guilds, Apprenticeship, or equivalent qualification in Mechanical Engineering Previous experience within manufacturing, production, woodworking, furniture, FMCG, packaging, or industrial environments Strong mechanical fault-finding and repair skills Experience working with hydraulics and pneumatics Ability to read and interpret engineering drawings Proactive and hands-on approach to maintenance Good communication and problem-solving skills Knowledge of continuous improvement methodologies would be advantageous What's On Offer? £35,000 - £45,000 basic salary (DOE) Monday to Friday days role Excellent work-life balance Overtime opportunities available Stable and growing manufacturing business Ongoing training and development Long-term career prospects If you're a mechanically biased engineer looking for a stable days-based role with a well-established manufacturer, we'd love to hear from you. TPBN1_UKTJ

Flood Risk Engineer (Flood Modelling / TUFLOW) £50,000 - £60,000 + Company Bonus + Hybrid Working + Progression + Company Benefits + Car Allowance Hemel Hempstead - Hybrid Are you a Flood Risk Engineer with experience in flood modelling looking to join a leading consultancy where you'll work on major residential, commercial and infrastructure projects, develop your technical expertise and progress your career within a growing team? Founded over 50 years ago, this established multi-disciplinary engineering consultancy delivers practical and innovative civil, structural, transport and surveying solutions across residential, commercial, education, science, infrastructure and industrial projects. Working in both the public and private sectors, the team collaborates closely with architects, developers, contractors and local authorities to provide high-quality engineering expertise from project conception through to completion. In this role, you will lead the delivery of flood modelling, Flood Risk Assessment and drainage projects across a range of sectors including residential, commercial, retail and education. You'll develop and review hydraulic models, prepare technical reports and liaise with clients, regulators and stakeholders throughout the project lifecycle. Working within a growing Water and Environmental team, you'll manage projects from inception to completion while supporting junior engineers and contributing to the continued growth of the business. This role would suit a Flood Risk Engineer with consultancy experience looking to take ownership of projects, develop client relationships and progress their career within a growing and supportive consultancy. The Role: • Leading flood modelling, Flood Risk Assessment and drainage projects, • Developing and reviewing models using TUFLOW, Flood Modeller and InfoWorks ICM, • Managing projects from inception through to completion, • Liaising with clients, local authorities and the Environment Agency, • Preparing technical reports and interpreting hydrological data, • Supporting and mentoring junior team members The Person: • Experience in flood modelling and flood risk management, • Proficient in TUFLOW and Flood Modeller, • Experience preparing Flood Risk Assessments, • Commutable to Hemel Hempstead Reference: BBBH25650A Flood Risk Engineer, Flood Modelling, TUFLOW, Flood Modeller, Flood Risk Assessment, FRA, Drainage, Sustainable Drainage, SuDS, Water Engineering, Hydrology, Civil Engineering, Hydraulic Modelling, InfoWorks ICM, Environment Agency, Consultancy, Hemel Hempstead, St Albans, Watford, Berkhamsted, Harpenden, Hitchin, Stevenage, Welwyn Garden City, Hertfordshire, North London If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

A leading environmental consultancy is looking for a Principal Civil Engineer in the Hydraulic Engineering sector.

A leading engineering consultancy in Greater London is seeking a Principal or Associate Engineer to support project delivery, focusing on urban drainage modelling and mentoring junior team members.The ideal candidate will have a relevant degree and experience in wastewater hydraulic modelling.The po

Field Service Engineer (Mechanical/ Electrical/ Hydraulics) South West £40,000 (OTE £60,000) + Paid Travel + Full Company Training + Progression to Manager + Company Car + 20 Days Holiday. Are you a Engineer with a background in Mechanical, Electrical, or Hydraulic systems, looking to join a marke

The ideal candidate should be pursuing a degree in Civil or Environmental Engineering and have a keen interest in Clean Water infrastructure. WSP in the UK & Ireland is seeking an Assistant Engineer to support potable water infrastructure projects. You will assist Engineers and Hydraulic Modellers,

Mechanical Workshop Technician (HGV / Plant Equipment) £50,000 - £60,000 + Bonus + 2x Overtime + Training on Plant Equipment + Days Based + Healthcare + Flexible Working Hours Tilbury, Essex Are you a Mechanical Workshop Technician or similar looking for a varied role completing maintenance on a range of equipment from Plant Machinery, HGVs, Trucks and Trailers? Do you have an NVQ level 3 and are looking for a day's-based role, working out of a brand-new workshop where you will receive ongoing progression and training? In this role you will diagnose faults, service, and repair a range of specialist Heavy Vehicles Pant equipment in Tilbury. The equipment you will be working on gives you lots of variety and technical challenges keeping each day unique. An ideal candidate would have some maintenance or fitting background with welding experience. On offer is a fantastic opportunity to work for a well-established company with a history of over 60 years, providing outstanding products and services across the forestry and recycling industries. The company continually re-invest, which has led to their stable growth to become a UK leader within their chosen sectors, producing some of the highest quality products. This role will suit a Mechanical Workshop Technician or similar, who has worked on Heavy Vehicles or hydraulic machinery looking for flexible working hours, giving you a great work life balance. The Role: Service and repair heavy machinery and vehicles Gain Specific industry training Workshop based Monday to Friday with occasional weekends paid at an enhanced rate The Person: Mechanical fitter or maintenance engineer Level 3 NVQ in HGV or similar Reference Number : BBBH25460b HGV, LGV, Plant Fitter, Engineer, Workshop Fitter, Plant Engineer, Heavy Plant, Heavy Machinery, Compacting, Plant hire, Electrical, Mechanical, Hydraulics, Essex If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Junior Laser Engineer (Mechanical / Electrical / Hydraulic).

A good level of electrical or mechanical knowledge, similar roles could include plant engineer, maintenance engineer, hydraulic engineer, pneumatic engineer, mechanical fitter. For more information regarding the position or to discuss any other opportunities, you can reach Reegan on 07969154727 or e

Project Engineer Hydraulics £40-55kBaseBenefits SouthEast|Ref:ABJ6484 Perm: onsite 5 days An excellent opportunity has arisen for a Project Engineer specialising in hydraulic systems to join a leading engineering and R&D team delivering advanced industrial equipment.Ready to apply Before you do, ma