Mig welding jobs in SunderlandCreate job alerts

We are looking for an experienced MIG Welder to join our production team, specialising in the fabrication of excavator buckets and heavy-duty attachments. You’ll be working with mild steel, carrying out multi-run MIG welds, and producing robust, high-quality components built to withstand tough environments. Key Responsibilities: MIG welding (multi-run) on mild steel plate and structural components Reading and working from engineering drawings Operating workshop machinery, tools, and equipment safely Ensuring all welds meet quality and safety standards Working as part of a team to meet production deadlines Requirements: Proven MIG welding experience (preferably in heavy fabrication) Strong ability to carry out multi-pass runs on mild steel Competent in reading fabrication/engineering drawings Good attention to detail and commitment to quality Ability to work independently or as part of a team Shifts and Pay Rates Shifts are Monday to Thursday nightshifs starting at 9pm. Paid for 10 hours daily. Overtime available before/after shifts. Basic 40 hours = £15.22 (+£24.00 per shift Night Allowance) 41-45 hours = £19.52 45+ = £21.96 £20 nights allowance per shift. If you're interested in a role that will see you clocking 40 hours a week, press apply now

We are looking for an experienced MIG Welder to join our production team, specialising in the fabrication of excavator buckets and heavy-duty attachments. You’ll be working with mild steel, carrying out multi-run MIG welds, and producing robust, high-quality components built to withstand tough environments. Key Responsibilities: MIG welding (multi-run) on mild steel plate and structural components Reading and working from engineering drawings Operating workshop machinery, tools, and equipment safely Ensuring all welds meet quality and safety standards Working as part of a team to meet production deadlines Requirements: Proven MIG welding experience (preferably in heavy fabrication) Strong ability to carry out multi-pass runs on mild steel Competent in reading fabrication/engineering drawings Good attention to detail and commitment to quality Ability to work independently or as part of a team Reliable, punctual and hard-working Shifts and Pay Rates Shift are Mon-Thurs 07.30-16.30 & Fri 07.00-12.00 Basic 40 hours = £15.22 41-45 hours = £19.52 45+ = £21.96 If you're interested in a role that will see you clocking 40 hours a week, press apply now

Shift Options Days Mon–Thu: 08:00–16:00 Fri: 08:00–12:30 Back Shift Mon–Thu: 16:00–00:00 Fri: 12:30–17:00 Night Shift Mon–Thu: 00:00–08:00 Fri: 17:00–21:30 Weekends Only Fri - Sun: 06:00-18:00 (36 Hours ) ?? What You'll Be Doing MIG welding using build and welding fixtures Work

MIG welder required for mild steel fabrication in a busy welding shop Working on a range of plates from 1mm through to 50mm. We are currently looking to recruit for a number of MIG Welders / Fabricator.

Fabricator Location: Carlisle, Cumbria Salary: Up to £45,000 per annum Shift: Days Job Type: Full-time, Permanent Sector: Industrial Job Role - Fabricator An exciting opportunity has arisen for an experienced Fabricator to join an established industrial business based in Carlisle. This is a fantastic opportunity for a skilled Fabricator looking for a permanent days-based position, working within a busy industrial environment alongside an experienced engineering and maintenance team. You will be responsible for carrying out fabrication, welding, repair and modification work on a range of industrial machinery, equipment and structural components. Key Responsibilities Carry out fabrication and welding work on industrial machinery and equipment. Fabricate, repair and modify steel components and structures. Read and interpret engineering drawings and specifications. Measure, cut, drill and shape materials accurately. Carry out MIG/MAG welding and other welding techniques where required. Complete planned and reactive fabrication work. Carry out repairs and modifications to machinery and equipment. Work closely with the engineering and maintenance teams to minimise downtime. Ensure all work is completed to a high standard and within required timescales. Maintain a safe and organised working environment. Follow all company health and safety procedures. Essential Requirements Previous experience as a Fabricator, Welder/Fabricator or similar . Strong fabrication and welding experience. Experience working within an industrial or heavy engineering environment. Ability to read and interpret engineering drawings. Competent MIG/MAG welding skills. Good understanding of steel fabrication techniques. Strong practical and problem-solving skills. Ability to work independently and as part of a team. Desirable Requirements Experience working with heavy industrial machinery. MMA/ARC welding experience. Structural steel fabrication experience. Mechanical or hydraulic knowledge. Experience carrying out machinery repairs and modifications. The Fabricator Will Benefit From Upto £45,000 salary. Days-based working pattern. Permanent position with an established industrial business. Opportunities for progression and development. Varied fabrication and welding work. The opportunity to work on a range of heavy industrial machinery and equipment. If you are an experienced Fabricator looking for a well-paid, permanent days-based position in Carlisle, this could be an excellent opportunity to take your next step. Apply now to find out more about this Fabricator opportunity. For further details, please contact Kieran Wall TPBN1_UKTJ

Carry out welding tests with the Welding co-ordinator in accordance with BS EN 1090 Essential Job Skills & Qualifications Time-served welder/fabricator with recent experience in structural steel fabrication Overhead crane certification. Job Responsibilities Perform welding, inspections, painting and

Seeking a Welder Fabricator in Sunderland to manufacture, repair, and rebuild heavy-duty earthmoving buckets and attachments using MIG welding and other fabrication techniques.

We are looking for an experienced MIG Welder to join our production team, specialising in the fabrication of excavator buckets and heavy-duty attachments. You’ll be working with mild steel, carrying out multi-run MIG welds, and producing robust, high-quality components built to withstand tough environments. Key Responsibilities: MIG welding (multi-run) on mild steel plate and structural components Reading and working from engineering drawings Operating workshop machinery, tools, and equipment safely Ensuring all welds meet quality and safety standards Working as part of a team to meet production deadlines Requirements: Proven MIG welding experience (preferably in heavy fabrication) Strong ability to carry out multi-pass runs on mild steel Competent in reading fabrication/engineering drawings Good attention to detail and commitment to quality Ability to work independently or as part of a team Reliable, punctual and hard-working Shifts and Pay Rates Shift are Mon-Thurs 07.30-16.30 & Fri 07.00-12.00 • Basic 40 hours = £15.22, • 41-45 hours = £19.52, • 45+ = £21.96 If you're interested in a role that will see you clocking 40 hours a week, press apply now

MIG / TIG Welder / Fabricator Leicester LE7 £16.40 per hour Day Shift: Monday to Thursday 07.30 - 16.00 and Friday 07.30 - 15.00 Temp to perm Immediate start available We are looking for an experienced TIG Welder / Fabricator to join a busy manufacturing business in Leicester, LE7. This is a temp to perm opportunity with steady hours, premium overtime, and the chance to join a growing welding team. What is on offer £16.40 per hour Overtime paid at a premium Immediate start steady day shifts Long-term opportunity with a busy and established business The role TIG welding structures from 1.5mm - 2.5mm MIG welding experience desired Working with stainless steel Fabricating from engineering drawings Working to a high standard of quality Supporting the team to meet production targets Keeping your work area clean and organised What we are looking for Previous TIG welding experience Previous MIG welding experience desired Fabrication experience Ability to read and work from engineering drawings Good attention to detail Reliable with a positive attitude and strong teamwork Interested? Call Sharon Pickering on (phone number removed) between 8am and 5pm on (phone number removed) to talk through the role, or email (url removed) outside those hours. Or click Apply Now and we will review your CV and come back to you. Ref: TIG Welder INDTEMP Cancel

My client based in Washington are looking for an experienced Fabricator/Welder to join an expanding team on a temporary to permanent basis. This position is available for an immediate start. The suitable candidate will be taken on a permanent basis after a qualifying period. You will be asked to undertake a weld test at interview stage. Salary is 13.28 per hour and then £13.80 per hour once taken on permanently. Requirements - • MIG Welder Experience of range plate 1mm to 50mm Free hand as well as using jigs and fixtures Must the ability to read engineering drawings Must have at least 2 years MIG welding experience Kinetic plc is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications confidentially and we review all submissions. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. IND1

Plater welder Days Mon - Thurs (Apply online only) Friday (Apply online only) Paying up to £17.00 P/H Could lead to a Permanent role, based in Hinckley LE10 Our client is looking for an experienced Welder/ fully skilled fabricator to join their expanding team. Interviewing immediately Day Shift Job Purpose To report to the Fabrication Manager To mig weld steel up to 20mm To read all engineering drawings Fully skilled in fabrication and Welding The Plater Welder Ability to Weld and Fabricate structural steel to a High Standard Highly skilled apprentice-trained fabricator who can read engineering drawings and cope with varied jobs and materials More than 3 years industry experience welding and fabricating mid to heavy gauge mild steel You should be able to work on your own initiative. Interested? To apply for the welder fabricator role, here are your two options: "This is the job for me! When can I start?" - Call now and let's talk through your experience. Ask for Sharon Pickering on (phone number removed) between 8am - 5pm "I think I'm right for this position, but I'm not sure I have enough to be get an interview" - Click "apply now" so I can read your CV and let you know Precision are committed to keeping our candidates informed and offers a guaranteed response within 7 days when applying through the application system Ref: Welder / Fabricator INDTEMP

Overview We are seeking a skilled Fabricator to join our dynamic team. The ideal candidate will possess a strong background Welding and Fabrication, with the ability to work with steel plate up to 200mm. This role requires MIG Welding experience and proficiency in using hand/power tools and cutting torches Duties • Weld and Fabricate heavy steel plate according to specifications and engineering drawings., • Perform Welding tasks using MIG Welding techniques, ensuring high-quality Welds that meet industry standards., • Utilise hand/power tools and cutting torches for cutting, steel up to 200mm thick, • Conduct inspections of finished products to ensure they meet quality control standards., • Maintain a clean and safe working environment by following health and safety regulations., • Collaborate with team members to optimise production processes and improve efficiency. Qualifications • Time served Welding and Fabrication, • Proven experience in and Welding and Fabrication, particularly with steel plate., • Strong mechanical knowledge with the ability to read and interpret technical drawings., • Basic maths skills for measurements and calculations related to Fabrication tasks., • Proficiency in using various hand tools and power tools/cutting torches safely and effectively., • Ability to work independently as well as part of a team, demonstrating good communication skills., • Attention to detail with a commitment to producing high-quality work., • Must pass an initial bare wire MIG Weld Test, • 5+ Multi Runs with 2 or 3 showing, • Fillet Weld Hourly Rate Basic Hours £19.00 CIS Basic Hours £17.23 (Includes holiday pay) Basic Hours £14.64 (Accrue holiday pay) Night Allowance £25.00 per Shift (£2.50ph) Overtime 1 x 1.50 (up to 5 hours) Overtime 2 x 1.66 (after 5 hours) Hours Night Shift (4 shifts) 21:00 – 07:30 Mon/Tue/Wed 20:30 – 07:00 Thu Day Shift 07:30 – 16:30 - Mon/Tue/Wed/Thu 07:00 – 12:00 – Fri

Injection Mould Tooling Technician £50,000 - £55,000 per annum + Overtimex1.5 x2 + Training + Progression 3 Shift Washington, Tyne and Wear Are you an experienced Injection Mould Toolmaker or Tooling Technician, looking to join a well-established, global manufacturing company offering training, overtime and long-term career opportunities? Due to continued growth, my client is looking for a maintenance engineer to join the team, working out of their state-of-the-art facility in Washington. You will be involved in planned and reactive maintenance on press and injection moulding tooling in a fast-paced production environment, as well as diagnosing tooling failures and implementing corrective actions. You will also be required to carry out MIG, TIG and Arc welding as required. The ideal candidate will have previous experience maintaining and repairing injection mould tools within a plastics manufacturing environment. Candidates with a background solely in metal pressing, fabrication or general toolmaking will not be suitable. This is a fantastic opportunity to secure a technical and varied role with a leading manufacturing company offering regular overtime and career progression opportunities. Please click apply - JOB REF 5382 - (url removed) The Role: Injection Mould Tooling Technician - 3 shift Maintenance and repairs to plastic injection moulding machines Troubleshooting tooling issues Welding repairs The Candidate: Tooling Maintenance experience within injection moulding TIG Welding essential, MIG and ARC highly beneficial *Experience with hot runner/manifold systems highly beneficial elix sourcing solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Washington|Sunderland|Newcastle|Gateshead|Mechanical|Maintenance|Tooling|Injection|Moulding|Die|Plastic|Tool INDMP

Baltic Recruitment are delighted to be supporting a Tier 1 automotive supplier with their search for a Die Maintenance Technician. The successful candidate will be responsible for maintaining, repairing, modifying, and optimising injection moulding tooling to ensure maximum performance, efficiency, and product quality. Key Duties: Maintenance & Repairs: Perform reactive and planned maintenance on press and injection moulding tooling in a fast-paced production environment. Problem-Solving & Root Cause Analysis: Diagnose tooling failures and implement long-term corrective actions to prevent recurring issues. Interdepartmental Collaboration: Work closely with production, quality, and engineering teams to meet operational targets and drive continuous improvement initiatives. Welding & Fabrication: Carry out repairs involving MIG, TIG, and ARC welding as required. Workload Management: Prioritise and manage tasks efficiently, adapting to shifting production demands. Technical Leadership & Development: Share knowledge within the team, mentor apprentices, and contribute to skill development initiatives. Independent working: Operate autonomously during solo shifts, managing maintenance tasks, troubleshooting issues, and making critical decisions to maintain tooling performance without direct supervision.Key Requirements: Proven experience in tooling maintenance within plastics, ideally within an injection moulding environment. Strong fault-finding and problem-solving skills with a focus on long-term solutions. Experience working with hot runner/manifold systems. Expertise in tool finishing and bedding.The Package: £47,000 - £53,000 per annum including shift allowance, dependant on experience. 3 shift pattern on rotation. Company pension scheme. 25 days holiday. On site canteen. Additional

TIG Welder / Fabricator required Hinckley LE10 Up to £21.00 per hour Morning shift: Monday to Thursday 07:00-16:00 / Friday 07:00-12:00 Permanent Immediate start available We are looking for an experienced TIG /MIG Welder / Fabricator to join a busy manufacturing business in Hinckley Leicestershire . This is a permanent opportunity with steady hours, premium overtime, and the chance to join a growing welding team. What is on offer Up to £21.00 per hour Overtime paid at a premium Immediate start Long-term opportunity with a busy and established business The role TIG welding stainless steel MIG Welding Fabricating from bespoke one off engineering drawings Working to a high standard of quality from start to finish Supporting the team to meet production targets Keeping your work area clean and organised What we are looking for Previous TIG welding stainless steel experience MIG Welding experience Full Fabrication experience Experience in the food and pharmaceutical industries is preferred Skilled in operating press brake, guillotine, rollers, and drill press Ability to read and work from engineering drawings Good attention to detail Reliable with a positive attitude and strong teamwork Interested? Call Sharon Pickering on (phone number removed) between 8:30am and 5:30pm to talk through the role, or email sharonp@(url removed) outside those hours. Or click Apply Now and we will review your CV and come back to you. INDTEMP

We are looking for an experienced MIG Welder to join our production team, specialising in the fabrication of excavator buckets and heavy-duty attachments. You’ll be working with mild steel, carrying out multi-run MIG welds, and producing robust, high-quality components built to withstand tough environments. Key Responsibilities: MIG welding (multi-run) on mild steel plate and structural components Reading and working from engineering drawings Operating workshop machinery, tools, and equipment safely Ensuring all welds meet quality and safety standards Working as part of a team to meet production deadlines Requirements: Proven MIG welding experience (preferably in heavy fabrication) Strong ability to carry out multi-pass runs on mild steel Competent in reading fabrication/engineering drawings Good attention to detail and commitment to quality Ability to work independently or as part of a team Shifts and Pay Rates Shifts are Monday to Thursday nightshifs starting at 9pm. Paid for 10 hours daily. Overtime available before/after shifts. Basic 40 hours = £15.22 (+£24.00 per shift Night Allowance) 41-45 hours = £19.52 45+ = £21.96 £20 nights allowance per shift. If you're interested in a role that will see you clocking 40 hours a week, press apply now

Key skills/experience: Current welding certification.

The job you'll do TIG/ MIG and SMWA manual welding. Have proven Experience in TIG, MIG and/or SMAW manual welding. Working to and strictly following approved Welding Procedure Specifications (WPSs).

This will be working with a client who specialise in on-site coded welding and installation who are looking to expand.

Competitive Pay | Enhanced Overtime Rates | Excellent Benefits | Long-Term Project.We are recruiting skilled welders to join a major UK infrastructure project in.

MIG welding to a high standard, ensuring that products are accurately manufactured in an effective and timely manner.

CIS (accommodation provided by the client).Hours of Work: Monday - Friday, 08:00 - 17:00, with flexibility required for 10-hour days.Some weekend work may also be required.Duration: Temporary 10 week contract (potential for ongoi.

Welder Fabricator | Bespoke Engineering Work.Full Time, Permanent, 39 hours per week, Monday to Friday.If you are a Welder Fabricator who enjoys actually fabricating rather than spending every day repeating one production weld, this is an opportunity worth considering.Our client is a long-establishe

Precise Recruitment Services Ltd is recruiting experienced.This is an excellent opportunity for fully skilled fabricators seeking secure, ongoing work within a professional and busy manufacturing environment.Fabricating aluminium windows, doors and specialist glazing products.

WELDER / FABRICATOR STELLEX MANUFACTURING LTD RAF-4235.Stellex Manufacturing Ltd based in Batley are looking for a Welder / Fabricator.We offer an extensive range of products for use in the catering industry, from the simplest of tables for food preparation through to bespoke servery counters.Thro

Work with TIG and Synergic MIG welding processes. This is a hands-on, varied role working on the construction of processing equipment, combining practical welding and fabrication with collaboration across the production team and, occasionally, client sites. Pay: PAYE: £20/hr ( but this is a permane

Strong MIG-TIG welding capability (additional welding processes beneficial). Key Responsibilities Perform MIG-TIG and MMA welding on structural and heavy-gauge steel. Role Overview The successful candidate will be responsible for fabricating and welding structural steel assemblies to precise enginee

Requirements Essential Skills & Experience: Previous experience in Aluminium MIG and TIG welding. Previous welding qualifications/coding preferred. Operating from a modern fabrication facility, the business offers a complete in-house manufacturing process, including design, laser cutting, CNC machi

Set up welding equipment and ensure correct operation. Maintain high-quality welding standards with strong attention to detail. Key Duties Carry out welding on steel, aluminium, and stainless steel components.

Working Hours Monday to Thursday: 08:00 - 17:00 Friday: 08:00 - 16:30 The Role MIG welding mild steel from 1mm - 15mm Welding both thin and thick sections, with or without jigs Producing strong, water-tight welds Reading and following engineering drawings Preparing materials and setting up welding e

Shift Options Days MonThu: 08:0016:00 Fri: 08:0012:30 Back Shift MonThu: 16:0000:00 Fri: 12:3017:00 Night Shift MonThu: 00:0008:00 Fri: 17:0021:30 Weekends Only Fri - Sun: 06:00-18:00 (36 Hours ) ?? What Youll Be Doing MIG welding using build and welding fixtures Working to tight tolerances Followin

Experienced Fabricator/Welder/Pipe Fitter needed for a permanent, full-time role.Competitive hourly pay with overtime opportunities available.

Skilled MIG Welder needed for Caterpillar's facility in Peterlee for a night shift contract position, offering overtime and bonuses.

Experienced Fabricator/Welder/Pipe Fitter wanted for a permanent, full-time role.Offers competitive pay and overtime opportunities.

Responsibilities include following instructions for product building, performing MIG welding with a focus on jig work, and adhering to health and safety regulations. Seeking an experienced MIG Welder for a permanent role in Rugby, working Monday to Friday, 7:45 am to 4:00 pm.