Offres production engineer à BedfordCréer des alertes d'emploi

Senior Electronics Hardware Design Engineer Office-Based Bedford Are you an experienced electronics hardware design engineer, looking for your next role? Our expanding client designs and manufacture premium residential and workplace EV charging products. They are looking for an experienced Senior Electronics Hardware Engineer to join their Product and Technology team to support the design, development, validation and continuous improvement of the electronics used within their charging products. The Role: You will be responsible for the hardware design and development of PCBs and associated electronic systems. This is a hands-on hardware engineering role covering the full development lifecycle, including circuit design, schematic capture, PCB development, component selection, prototype bring-up, testing, validation, EMC, compliance and production support. You will work closely with firmware, software, mechanical, production and quality teams to develop robust, reliable and manufacturable EV charging hardware. More Detail: Design and develop electronic circuits for EV charging products. Create and maintain schematics, PCB designs and associated engineering documentation. Support PCB layout and design reviews. Select and evaluate components considering performance, reliability, cost and availability. Carry out prototype PCB bring-up, debugging and fault finding. Develop and execute hardware test and validation plans. Perform analogue and digital circuit testing using appropriate laboratory equipment. Design for EMC and support pre-compliance and formal EMC testing. Support electrical safety, regulatory and product certification activities. Investigate hardware failures and carry out structured root-cause analysis. Support Engineering Changes and continuous product improvement. Work closely with firmware and software engineers during integration and debugging. Support internal and external manufacturing with PCB and electronics-related issues. Improve production test methods, fixtures and diagnostic capability. Support component obsolescence, alternative component qualification and supply-chain issues. Ensure design, test and validation documentation is clear, controlled and maintained. Experience Required: Degree or equivalent experience in Electronics, Electrical Engineering or a related discipline. Strong industry experience in electronic hardware design and development. Proven analogue and digital circuit design experience. Strong schematic capture and PCB design/review capability. Experience with Altium Designer at expert level. Experience of PCB bring-up, debugging and fault finding. Practical experience using oscilloscopes, multimeters, power supplies, electronic loads and other laboratory equipment. Good understanding of EMC design principles and practical EMC troubleshooting. Experience of hardware verification and validation. Experience with relevant electrical safety, EMC and product compliance standards. Experience with microcontroller-based products, including STMicroelectronics, Espressif or Atmel/Microchip devices. Experience of RF communications, antenna integration and RF/EMC troubleshooting. Ability to investigate complex hardware issues using a structured engineering approach. Good understanding of component selection and design for manufacture. Experience developing mains-powered electronic products. Nice to have experience: Experience of EV charger / EVSE hardware design and development. Knowledge of EV charging industry standards and regulatory requirements. Experience supporting electronics manufacturing and production test. Knowledge of design-for-manufacture and design-for-test principles. Experience working with contract electronics manufacturers and PCB assembly suppliers. This long term permanent role is offering a basic salary of £60,000 - £65,000 plus benefits. If you have the proven electronics hardware engineering experience our client is looking for then APPLY NOW, in complete confidence. Advancing People - The Recruitment Specialist Advancing People Ltd is an Equal Opportunities Employer and acts as both an Employment Business and Employment Agency. TPBN1_UKTJ

Maintenance Engineer (Electrical or Multiskilled) Location: Shepton Mallet, Somerset Salary: £53,500 - £55,000 + Annual Bonus Shift: 4 on 4 off | Days & Nights Benefits: Company Bonus, Sick Pay, Life Assurance, Pension, Employee Discounts & More Are you a Maintenance Engineer looking for more than just another job keeping production lines running? How about joining a successful, growing manufacturer that's investing in its people, equipment and engineering department, with a supportive management team who genuinely want to build something good? We're working with a well-established drinks manufacturer in Shepton Mallet that's continuing to invest in its production facility, engineering capabilities and people. With a large, modern manufacturing site, multiple high-speed production lines and ambitious plans for the future, this is an opportunity to join a business where engineering plays a key role in its continued success. What really stands out is the engineering culture. You'll be joining a friendly, experienced engineering team with an approachable and supportive management structure. There's a genuine focus on developing the department, improving reliability and giving engineers the support they need to do their jobs properly. This isn't simply about filling another position. The business is strengthening its engineering team, investing in equipment and building a department that can support its long-term growth. Whether you're an experienced Maintenance Engineer looking for a fresh challenge or a recently qualified engineer keen to develop your skills, there's plenty of opportunity to get involved, learn and make a difference. This is what you'll be doing: Working as part of the site's maintenance team, you'll be responsible for electrical and mechanical fault finding, planned maintenance and improvements across a wide range of modern production and packaging equipment. With multiple production lines manufacturing millions of drinks each year, you'll be working in a busy, technically varied environment where no two shifts are quite the same. Your responsibilities will include: Diagnosing and repairing electrical and mechanical faults across high-speed production and packaging machinery. Working with PLC-controlled equipment, inverters, motors, sensors, servo drives and associated control systems. Mechanical maintenance involving conveyors, gearboxes, bearings, pumps, shafts, pneumatic systems and other production equipment. Carrying out planned preventative maintenance and identifying opportunities to improve equipment reliability. Supporting engineering projects, equipment upgrades and continuous improvement initiatives. Working closely with production teams to minimise downtime and improve plant performance. Contributing ideas and improvements as the engineering department continues to develop. The experience you'll bring to the team: We're looking for a practical, hands-on Maintenance Engineer ideally with an electrical bias who enjoys fault finding, getting involved and working as part of a team. Ideally, you'll have: A recognised engineering qualification, apprenticeship or equivalent time-served experience. A multi-skilled maintenance background with strong electrical fault-finding capabilities. Experience working with motors, drives, sensors, control panels and three-phase electrical systems. Good mechanical knowledge of equipment such as conveyors, gearboxes, bearings, pumps and pneumatic systems desirebale Experience fault finding on PLC-controlled machinery, although programming experience isn't essential. Previous experience within manufacturing, ideally FMCG, food, drinks, packaging or another fast-paced production environment. A positive attitude, willingness to learn and an interest in improving how things are done. You don't need to know everything. The business is equally interested in engineers with a solid technical foundation who are keen to develop their skills within a supportive team. And this is what you'll get in return: Alongside a competitive salary, you'll be joining a business that recognises the importance of looking after its people. The package includes: £53,500 - £55,000 annual salary Annual Site Bonus Company Sick Pay Scheme Life Assurance Company Pension Scheme 4 on 4 off shift pattern, providing extended periods away from work Employee Discounts on company products Cycle to Work Scheme Free On-Site Parking Ongoing Investment in equipment, technology and engineering improvements Supportive Engineering Management with an approachable, hands-on leadership team Training & Development Opportunities to further strengthen your electrical and mechanical skills Perhaps most importantly, you'll be joining a business with a clear ambition to keep improving, where engineers are encouraged to contribute ideas, get involved in projects and play a genuine part in developing the department. Interested? If you're a Maintenance Engineer looking for a well-paid position with a supportive team, excellent benefits and the opportunity to be part of an engineering department that's moving in the right direction, we'd love to hear from you. Apply with your up-to-date CV or contact Liam Reid at Yolk Recruitment for a confidential conversation about the opportunity. Know someone who might be interested? Ask about our referral scheme. Please note, due to the high number of applications we receive, we may not be able to respond to everyone directly. If you haven't heard back within 7 days, unfortunately, your application hasn't been successful on this occasion. JBRP1_UKTJ

Principal Civil Engineer £65,000 + Benefits UK Wide Hybrid Working (2 Days Per Week On Site) Due to the nature of the projects you will need to be a Sole UK National to apply for this role Outsource UK are recruiting for a Principal Civil Engineer to join a leading consultancy delivering complex and high-profile projects across the UK. This is an excellent opportunity for an experienced civil engineering professional looking to take a leading role in the design and delivery of major urban development and infrastructure schemes. Working within a multidisciplinary environment, you will provide technical leadership across a range of building and development projects, with a focus on drainage, highways, utilities, earthworks and site development. Experience within industrial manufacturing, technology or defence sectors would be advantageous. As a Principal Civil Engineer, you will be responsible for leading engineering activities from concept through to delivery, ensuring high-quality, sustainable and practical design solutions. You will work closely with multidisciplinary teams, project stakeholders and clients, while supporting and mentoring junior engineers. Key responsibilities include: • Leading civil engineering design activities across a range of development projects., • Managing the production and review of drawings, BIM models, reports and technical specifications., • Coordinating multidisciplinary design teams to deliver integrated engineering solutions., • Overseeing project planning, resource allocation and programme management., • Managing design risk, hazard logs, assumptions registers and design decision records., • Attending and leading project meetings with clients and stakeholders., • Providing technical guidance, leadership and mentorship to engineers, technicians and apprentices., • Ensuring projects are delivered in line with quality, safety and engineering standards. About You To be successful in this role, you will have:, • A degree in Civil Engineering or a related discipline., • Sole UK National, • Chartered or Incorporated Engineer status, or be working towards chartership., • Strong experience in civil engineering and urban development design., • Proven knowledge of surface water drainage, foul drainage, highways and utility infrastructure., • Experience using MicroDrainage/InfoDrainage, AutoCAD Civil 3D and BIM processes., • Good understanding of industry standards including SuDS, Sewers for Adoption, DMRB and Building Regulations., • Project management experience, including planning, commercial awareness and client engagement., • The ability to lead teams, manage workloads and develop junior engineers., • Strong technical problem-solving skills with the ability to apply engineering principles effectively. If you're an experienced Civil Engineer looking for your next challenge and the opportunity to lead on exciting projects across the UK, we'd love to hear from you. Apply today through Outsource UK. Inclusion Statement: Outsource UK is committed to creating a diverse and inclusive environment and is proud to be an equal opportunity employer. You'll receive fair consideration for your application regardless of your race, religion or belief, gender, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age. We're proud Corporate Members of the Hidden Disabilities Sunflower. If you need any adjustments at any stage - from application to interview or in your new role - please let us know. We're here to support you every step of the way. We believe diversity of thought and background makes us stronger, and we welcome applications from people of all backgrounds and life experiences. JBRP1_UKTJ

Electrical Site Services Engineer Monday to Friday Days | 7:30am - 4:00pm Salary: £48,000 Location: Poole, Dorset Are you an electrically qualified Maintenance Engineer looking to move away from shift work into a Monday-to-Friday days role? Do you have experience maintaining electrical infrastructure, industrial utilities or building services within a manufacturing or facilities environment? We're working with a leading UK food manufacturer to recruit an Electrical Site Services Engineer to join their established engineering team in Poole. This is an excellent opportunity for an experienced Electrical Engineer who enjoys varied, hands-on maintenance work and wants to take ownership of the electrical systems that keep a large manufacturing facility running. You'll be working across a wide range of site services and utilities, including electrical distribution systems, switchgear, control panels, industrial boilers, compressors, pumps, refrigeration and ventilation systems. Unlike a traditional production maintenance position, your focus will be on the site's electrical infrastructure, utilities and building services, ensuring essential equipment remains safe, reliable and fully operational. This is what you'll be doing: As an Electrical Site Services Engineer, you'll play a key role in maintaining and improving the site's electrical infrastructure, utilities and associated building services. Responsibilities: Carry out planned and reactive electrical maintenance across site services, utilities and building infrastructure. Diagnose and repair electrical faults across three-phase systems, motors, control panels, contactors, relays, inverters and associated electrical equipment. Maintain and inspect electrical distribution systems, switchgear, distribution boards, isolators and associated infrastructure. Support the maintenance of industrial utilities, including the electrical systems associated with boilers, compressors, refrigeration plant, pumps and ventilation equipment. Carry out electrical installation work, component replacements, modifications and upgrades across the site. Read and interpret electrical drawings and schematics to identify faults and support maintenance activities. Support electrical compliance activities, including inspection, testing, preventative maintenance and safe isolation procedures. Coordinate external contractors and specialist service providers, ensuring all work is completed safely and to the required standards. Identify opportunities to improve equipment reliability, energy efficiency and site infrastructure, supporting ongoing improvement projects. The experience you'll bring: We're looking for an electrically qualified engineer with strong fault-finding skills and experience working with industrial electrical systems. Ideally, you'll have: A recognised electrical engineering qualification, such as NVQ Level 3, City & Guilds or equivalent. Previous experience within manufacturing, industrial facilities, utilities or building services maintenance. Strong electrical fault-finding skills across three-phase systems, motors, control panels and associated electrical equipment. Experience maintaining electrical distribution systems, switchgear, distribution boards or industrial electrical installations. Confidence reading and interpreting electrical drawings and schematics. A good understanding of electrical safety, safe isolation and permit-to-work procedures. Experience supporting the electrical maintenance of industrial utilities, such as compressors, boilers, refrigeration systems, pumps or ventilation equipment. Desirable qualifications and experience: 18th Edition Wiring Regulations. City & Guilds 2391 Inspection and Testing. Experience with building management systems (BMS). Previous involvement in electrical installation projects, site upgrades or contractor management. And this is what you'll get in return: Salary £48,000 Monday to Friday days (7:30am - 4:00pm) No regular night shifts or weekend working Electric vehicle salary sacrifice scheme Cycle to Work and Home & Tech salary sacrifice schemes Online and high street retailer discounts Access to health and wellbeing support services Ongoing technical training and development opportunities Company mentoring scheme Free products and employee rewards Long-term stability within an established UK food manufacturer Are you up to the challenge? If you're an electrically qualified Maintenance Engineer, Electrical Technician or Site Services Engineer looking for a varied, days-based role with a strong focus on electrical infrastructure and industrial utilities, we'd love to hear from you. This opportunity could suit engineers from manufacturing, facilities management, building services or industrial maintenance backgrounds who enjoy hands-on electrical work and want to develop their skills across a diverse range of site services equipment. Apply today with your CV to find out more. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. JBRP1_UKTJ

Electrical Design Engineer (Fire Protection) £50,000 - £60,000 + Hybrid + Company Bonus + Training + Increasing Holidays + Progression + Flexible hours Remote Are you an Electrical Design Engineer, looking for a remote role within the Fire Protection industry, for a company who are rapidly expanding working in datacentres, investing in the business and their team, going from strength-to-strength? Do you want to be a key member of a highly skilled team of 8 designers, for a company that offers ongoing progression routes and the chance to put your stamp on the department? This company provides design, maintenance and servicing for fire and security systems across the UK, working with large blue-chip clients in data centres, as well as commercial and government establishments such as hospitals and schools. In this role, you will work closely with the Project Director to help develop and support the design team. You will be responsible for using BIM Modelling to create specifications on Fire protection designs for data centres. This role would suit a Design Engineer from Data centres, Fire Protection or a similar mechanical industry that is confident liaising with both clients and directors internally to ensure the smooth running of projects. The Role: • Robust drawing checking and approval procedures, • Using Revit and BIM Modelling to create specifications, • Work closely with Project Directors and clients throughout, • Lead design reviews and meetings, • Completely remote with an office visit to Reading once a month The Person: • Electrical Design background or similar, • Willing to Commute to Reading once a month Reference Number: BBBH27391a Electrical, Design Engineer, Fire, Security, Engineering Manager, CAD Manager, Drawing Office Manager, Manufacturing Design, Production Engineering, Data Centre, AutoCAD, Revit, Berkshire If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

Do you have an understanding of MRP Systems? Do you have knowledge of Composite Processing? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Senior Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Develop manufacturing processes, • Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing, and material handling taking into account flow and lean philosophies, • Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines, • Identifying any new tooling & fixturing requirements, • Experienced in the creation of Technical Requirement Specifications, • Creation of detailed process instructions, • Creation of Manufacturing BOM’s/routings to aid ease of manufacture, • Active involvement in the Level 1 & 2 MDWT (Mission Directed Work Team) meetings, • Support and contribute to the relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements, • Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance, • Close liaison of activities with Industrial Engineering, Production Engineering, and other functions as necessary, • Support with the business process reviews and generation/update of relevant documentation, • Detailed Assembly Processing knowledge (Electro-Mechanical, Bonding, etc.), • Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools, • Experience with CAD software for generating 2D technical drawings, • Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems), • Composite processing knowledge #J-18808-Ljbffr

NBCUniversal in the United Kingdom is seeking an experienced engineer to support or lead ride/show system projects at Universal United Kingdom Resort. You will manage bids, design, production, installation, testing, and commissioning, with a focus on ride and show control systems. The role involves steering vendors, translating creative intent into technical documents, and ensuring safety and compliance across project phases. #J-18808-Ljbffr

TLD Powervamp in Kempston seeks an embedded firmware engineer to design, develop, and validate firmware for our GSE product range, from prototyping to production. You will work across the full development cycle with hardware designers and a multidisciplinary team to deliver robust embedded software for aviation ground support equipment. Reporting to senior engineers, you will ensure high quality code, maintain documentation, and support transition to production while contributing to safety and #J-18808-Ljbffr

Lexington Medical in Bedford, MA is seeking an Automation Engineer to design fixtures and specify robotics and automation equipment for AEON surgical stapling products. You will scale processes as production grows and work on lines while gaining hands-on experience on a real manufacturing floor. As an entry-level role, you will join a regulated quality environment and collaborate with manufacturing, engineering, and quality teams to deliver robust production solutions from concept through #J-18808-Ljbffr

Location: Ampthill, Bedfordshire. The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. We’re seeking a Senior Composites Manufacturing Engineer to join our team based in Ampthill, Bedfordshire. This role will focus on involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Manufacturing Engineer is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The Manufacturing Engineer will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. The successful candidate must be able to achieve the appropriate level (SC) of security clearance. More details can be found here • Detailed Composites Processing knowledge (winding, composite layups, resin infusions)., • Experience working with variety of composites materials including carbon fibre and silica, • Experience with assembly and bonding techniques., • Knowledge of different composites bagging and curing techniques, • Knowledge of Lean Manufacturing, Six Sigma and quality improvement tools., • Experience with CAD software for generating 2D technical drawings., • Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems)., • Proven ability to drive cultural and process change, improving efficiency and quality., • A collaborative mindset with a passion for continuous improvement. #J-18808-Ljbffr

H&H is seeking a team-focused, dynamic, innovative, and results-oriented Mid-Level Roadway/Transportation Engineer to join our growing Highway Group in Bedford, New Hampshire. This position offers the opportunity to apply technical expertise, collaborate with multidisciplinary teams, and support project delivery for a diverse range of transportation clients. The successful candidate will contribute to roadway design, project engineering, client coordination, and the development of less experienced engineers. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. • Produce roadway and transportation designs for new and rehabilitation roadway projects., • Attend client project meetings, participate in proposals and presentations, manage project tasks and projects, and meet with regulatory agencies., • Communicate and coordinate effectively with other members of the design team., • Manage, train, and mentor less experienced engineers in the production of plans, specifications, and estimates., • Perform project engineering responsibilities related to project communication, scheduling, budget, and progress across multiple concurrent tasks., • Assist with local marketing efforts, including proposal preparation, professional chapter meetings, and municipal functions and meetings., • Five to fifteen years of relevant highway, interchange, and roadway design experience., • Professional Engineer (PE) license, or ability to obtain licensure within six months., • Familiarity with New Hampshire Department of Transportation (NHDOT) design standards., • Drainage design experience preferred., • Proficiency in Bentley CONNECT Suite and AutoCAD Civil 3D., • Detail-oriented, goal-oriented, and self-motivated, with strong verbal and written communication skills., • Ability to work independently and as part of a team, and to manage small design groups and projects. We offer a professional work environment, competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS #J-18808-Ljbffr

NBCUniversal in Bedford, UK, seeks a Senior Ride/Show Systems Engineer to drive specifications, bids, design, production, installation and testing of ride and show control systems.

Lexington Medical, Inc.is a medical device company developing and manufacturing minimally invasive surgical stapling solutions in the Boston area. With the highest standards in design engineering and smart manufacturing, our team delivers disruptive technology to healthcare providers, improving surgical outcomes for patients in a thriving $6B+ surgical stapler market. Rooted in a talent-dense culture, we are committed to innovation, foster continuous growth, and achieve great heights together. At Lexington Medical, Inc., you will have the opportunity to impact the lives of millions of patients worldwide and thrive in a fast-growing MedTech company. We are hiring a Senior Manufacturing Engineer to join our team at Lexington Medical, Inc. in Bedford, MA headquarters. Reporting to the Head of Manufacturing, you will be a technical leader in Lexington Medical's onsite production spaces, responsible for proprietary equipment optimization, NPI, and continuous improvement projects. This role manages a small team of early career manufacturing engineers and technicians, each responsible for supporting the manufacturing line for part of the product portfolio. This role works typical business hours Monday to Friday, with some need to be remotely available during evenings as questions may come up from second shift production supervisor. This is an ideal opportunity for a high-performing manufacturing engineer ready to step into a people management role, while remaining deeply technical. • Provide technicalmentorshipand peoplemanagementto a small teamwhorefine and support existing equipment, design andmaintainprocesses, and develop fixturing.You willbe responsible fortheoutput andprofessional growth of your direct reports., • Understand, debug, and alter complex proprietary equipment (designed by our own in-house automation team).You will be a technical escalation point for your team and must feel comfortable getting hands-on to perform root cause analysis., • Coordinate product and equipment introduction and change control processes on the manufacturing floor, developing systems to ensure smooth R&D to operations hand-offs., • Own technical excellence and systemic integrity across all product manufacturing lines. You will lead and organize your team to detect and address quality or yield issues, guiding them in the balance between rapid-response 'firefighting' and long-term solutions for persistent issues., • Provideclear,practicalguidance to productiontechnicianswhile also collaboratingon high-level strategywiththeR&D, quality, and operations departments of the company., • Bachelor's degree in mechanical engineering, electricalengineeringor equivalent area of study., • 4+ years ofhands‑onengineering experience supporting advanced manufacturing, • Proven success improving production metrics through intelligent design,processimplementation/augmentation, or other means., • Ability to empower a team to act decisively and take calculated technical risks to keep production moving.You have done thisasa mentor, even if youhaven'tbeen a formal direct people manager., • Excellent organizational skills and attention to detail. Strong problem-solving skills, including root cause analysis and analytical thinking., • Experience working with automated or semi‑automated fixtures, especially a working knowledge of PLCs is useful, but not required. Lexington Medical, Inc.is asurgical stapling companybased inBedford, MA, developingsmart surgical technologyforminimally invasive procedures.We're hiringtop engineersandmedical device sales professionalsto help us grow and improve outcomes for patients worldwide. $115,000-$130,000 USD #J-18808-Ljbffr

Project Engineer - Electrical or Mechanical Location: Exeter, Devon Salary: £55,000 - £57,500 + Annual Bonus Hours: Monday to Friday, Days Benefits: 10% Employer Pension | Private Healthcare | 6x Life Assurance | Excellent Sickness provision Are you an experienced Electrical or Mechanical Project Engineer looking for greater technical variety, responsibility and the opportunity to deliver significant engineering projects within a large manufacturing environment? Perhaps you've progressed from a hands-on engineering background into project delivery and are now looking to take ownership of larger installations, capital investment programmes and site improvements? We're working with a globally recognised manufacturer in Exeter that's continuing to invest significantly in its production facilities, engineering infrastructure and manufacturing capabilities. With substantial investment planned across equipment, facilities and site infrastructure, the business is looking to strengthen its engineering function with an experienced Project Engineer from either an Electrical or Mechanical background. You'll take responsibility for delivering projects from initial concept, technical specification and equipment sourcing through to contractor management, installation, commissioning and handover. This is an excellent opportunity to join an established engineering department offering technical variety, continued investment and genuine career development, alongside an exceptional salary and benefits package. This is what you'll be doing: As a Project Engineer, you'll plan, coordinate and deliver engineering projects across a busy manufacturing facility. Depending on your electrical or mechanical background, your responsibilities will include: Managing engineering projects from initial concept and feasibility through to installation, commissioning and handover. Delivering capital projects involving new machinery, production equipment, plant upgrades and site infrastructure. Developing technical specifications, project scopes, budgets, costings and implementation plans. Sourcing and specifying equipment, machinery, materials and specialist engineering services. Managing suppliers, contractors and subcontractors, ensuring work is delivered safely, on time and within budget. Coordinating installations and commissioning while minimising disruption to production. Delivering improvements to electrical and mechanical infrastructure, industrial utilities and building services. Working with maintenance and production teams to identify opportunities to improve equipment reliability and performance. Reviewing technical drawings, specifications and engineering documentation. Ensuring compliance with engineering standards, health and safety requirements and company procedures. Managing multiple projects and maintaining communication with internal and external stakeholders. Electrical Engineering Projects For electrically biased engineers, projects may involve: Electrical distribution systems, power supplies, switchgear and associated infrastructure. Control panels, motors, drives, electrical installations and control systems. Electrical requirements for new machinery and production equipment. Lighting, building services and site infrastructure improvements. Electrical upgrades, equipment modifications and commissioning. Mechanical Engineering Projects For mechanically biased engineers, projects may involve: Installation and upgrades of industrial machinery and mechanical plant. Pumps, compressors, pipework, valves and associated mechanical systems. Hydraulic and pneumatic equipment, mechanical assemblies and production machinery. Industrial utilities, ventilation, HVAC and other site services. Mechanical equipment specifications, installations and commissioning. The experience you'll bring to the team: We're interested in speaking with experienced Project Engineers, Plant Engineers, Capital Projects Engineers and Facilities Project Engineers from manufacturing and industrial environments. Ideally, you'll have: A recognised engineering qualification, ideally HNC/HND or equivalent in Electrical, Mechanical or a related discipline. Proven experience delivering engineering projects, ideally within manufacturing, industrial plant or facilities. Experience taking projects from concept and specification through to installation, commissioning and handover. Experience with equipment sourcing, supplier selection, technical evaluations and contractor management. The ability to develop project scopes, budgets, costings and implementation plans. Confidence reviewing engineering drawings, specifications and equipment requirements. Good knowledge of engineering standards, safe systems of work and contractor management. Strong organisational skills and the ability to manage multiple projects. Experience with CAD, CMMS or project management systems would be advantageous. A practical engineering background is highly valued, but previous project delivery experience is essential. You may have started your career as a Maintenance Engineer, Electrical Engineer or Mechanical Engineer before progressing into projects. That hands-on experience is extremely valuable, but we're looking for engineers who have since developed responsibility for planning, specifying, coordinating and delivering projects, rather than those primarily involved in reactive or planned maintenance. And this is what you'll get in return: £55,000 - £57,500 Basic Salary Monday to Friday, Days Annual Company Performance Bonus 10% Employer Pension Contribution Private Healthcare 6x Annual Salary Life Assurance Comprehensive Company Sick Pay 25 Days Annual Leave + Bank Holidays Additional Christmas Shutdown Not Taken From A/L Annual Salary Reviews Funded Training & Professional Development Long-Term Career Progression Continued Investment in equipment, facilities and manufacturing technology. Why consider this opportunity? This is an opportunity to take ownership of technically varied engineering projects within a large, well-invested manufacturing environment. You'll be involved in specifying equipment, developing solutions, managing contractors and delivering installations that directly improve the site's infrastructure and manufacturing capabilities. With significant investment planned, an established engineering team and an excellent benefits package, this is a particularly attractive opportunity for experienced Project Engineers looking for their next challenge. Interested? If you're an experienced Electrical or Mechanical Project Engineer, or you've progressed from a hands-on engineering background into project delivery, we'd be interested in hearing from you. Apply with your up-to-date CV or contact Liam Reid at Yolk Recruitment for a confidential discussion. Know someone who might be interested? Ask about our referral scheme. Please note, due to the high number of applications we receive, we may not be able to respond to everyone directly. If you haven't heard back within 7 days, unfortunately, your application hasn't been successful on this occasion. JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: It's great to know you're making a difference to the future of aviation! Whatever part you play you'll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant you'll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As part of the Manufacturing Engineering team, the Senior Manufacturing Engineer will report directly to the Manufacturing Engineering Manager, with day-to-day guidance and support provided by the ME Team Leader. Based at our Luton site and supporting Defence business lines, there may occasionally be a need to travel to equipment supplier locations. The Senior Manufacturing Engineer will join a team focused on either Jet Canopies or Helicopters, contributing to the development of manufacturing processes as well as supporting daily operational activities. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, earlier finish on Friday to start the weekend. Job Responsibilities • Local project technical lead for the implementation of production planning, from original concept through to production., • Design high capability manufacturing processes using GKN's Zero Defect Manufacturing (ZDM) tool suite, (APQP Core Tools)., • Develop, document and optimise manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process Specifications, • Create and update engineering documentation, manage point of introduction activities., • Lead structured improvement activities to reduce process driven scrap and rework, • Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered, • Make presentations at senior level internally and externally demonstrating ability to clearly communicate to the audience, • Identify, anticipate and offer solutions to technical problems, • Establish & improve production process controls, • Comply with company Environmental, Health, Safety and Energy procedures. Profile description: To help us make a difference, you'll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: • Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/Aerospace, • Demonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry, • 6Sigma Greenbelt qualification, • Experience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability, • Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques, • Demonstrable experience of practical problem-solving techniques using A3 or 8D Desirable: • Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5S, • Experience in lay-up processes for composite materials, • Specification interpretation experience We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in their approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we will assess each case individually) We offer: Once you're on board you'll get the following perks and benefits: • Competitive salary dependent on experience, • The opportunity to earn up to 15% bonus, • Industry Leading Pension Scheme = we'll match your contributions up to 8% on a 1 : 1.5 basis, • Life Assurance 8 x salary, • 185 hours holiday + bank holidays, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family, • Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included), • Free onsite parking, • Local gym discount, • Free airport parking, • Discount with local nursery and preschool childcare setting, • Enhanced family friendly leave, • A collaborative, dynamic working environment As well as a competitive package we'll offer you a world of opportunity. We want to see your career fly! We'll support your career progression by providing you with learning and development opportunities. That's the beauty of being part of a global business, once you're on board you never know where you career journey may take you! Join us and keep the world moving … click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us ‘The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? JBRP1_UKTJ

ABOUT US With over 30 years of expertise, Apogee transforms how organisations of every size and sector manage their IT - delivering everything they need through one seamless point of contact. As an independent subsidiary of HP Inc., we combine the agility of a specialist provider with the power of one of the world's leading technology companies, giving our clients instant access to cutting-edge innovation backed by market-leading service operations! JOB DETAILS To carry out service visits to reported calls throughout the companies' customer base within a specified region. The successful candidate will establish and promote the attributes of a professional service support operation and adapt and develop service needs in line with changes in manufacturer products and functionality. • Respond to customer service requests for the repair of business equipment and production printers, • Carry out fault diagnosis and establish effective repairs through adjustment cleaning or replacement of spare parts, • Carry out preventative maintenance in accordance with manufacturer guidelines and recommendations from service management, • Work with colleagues to help overcome new or unusual faults, • Invoke the call escalation process in a timely manner, • Inform the customer on the work carried out and gain acceptance to the machines condition and performance following the service work you have completed, • Carry out the installation of equipment sold by the company and ensure the machine performs to the customers satisfaction A typical working pattern is Monday to Friday, 08:30 to 17:30, with a one-hour lunch break. This role is fully remote and home-based. Attendance at our offices is required periodically for team meetings and training. SKILLS AND EXPERIENCE REQUIRED • Experience of fixing production printers and digital presses - such as Ricoh, Konica Minolta, Xerox, Sharp, Canon., • Experience in the office equipment industry, • Technical skills, with a strong electronic and mechanical background, • Strong IT knowledge with the ability to network devices and to set up scanning functions, • The ability to provide first class customer service with previous customer facing experience. ENHANCED DBS: This role is subject to an Enhanced Disclosure and Barring Service (DBS) check. As the position is exempt from the provisions of the Rehabilitation of Offenders Act 1974, applicants are required to disclose all spent and unspent convictions, cautions, reprimands, and final warnings that are not protected under the Exceptions Order 1975. Any offer of employment will be conditional upon a satisfactory DBS certificate and a risk assessment of any disclosed information. We are committed to fair recruitment and will consider disclosed information on a case-by-case basis, in line with our policy on the recruitment of ex-offenders. SC CLEARANCE: For this role, you will be required to obtain SC Clearance - which includes a basic criminal record check. BENEFITS • Flexible working options, • 33 days holiday including bank holidays, • Holiday purchase scheme, • Enhanced family friendly benefits (maternity, adoption, paternity and IVF), • 2 paid days off per year for voluntary work to support our local communities, • Staff Reward Scheme, • Pension scheme, • Life assurance 4 x salary, • Sponsorship for professional development and memberships, • Employee Assistance Programme, including financial wellbeing support, • Mental health first aider support programme, • Cycle2work scheme, • Discounted Gym Membership, • Eye care voucher scheme, • Free flu vaccinations, • Employee social events and recognition activities throughout the year, • HP Employee discount programmes, • Mobile phone discounts WHY JOIN APOGEE At Apogee, our values - Integrity, Passion, Courtesy & Respect, Inclusivity, Knowledge, People and Flexibility - shape everything we do. They guide how we work with clients and colleagues, drive ethical practices and create an environment where you can grow, innovate and develop your career within a progressive, expanding organisation. We are looking for inspiring individuals who want to make a real impact in their careers and the world around them. Diversity and inclusion are at the heart of our success. We know true innovation flourishes when people can be their authentic selves. As an Equal Opportunity Employer we welcome applications from all backgrounds, and we actively value different perspectives across age, gender, ethnicity, sexual orientation, disability, religion and belief. Your individuality drives our shared success, and we encourage you to bring your whole self to Apogee. We support flexibility and accessibility. If flexible wo JBRP1_UKTJ

Maintenance Engineer - Mechanical, Electrical or Multi-Skilled Location: Exeter, Devon Salary: Up to £57,500 + Bonus + Enhanced Overtime Shifts: Days, Rotating Shifts & Continental Patterns Available Benefits: 10% Employer Pension | Private Healthcare | Excellent Sick Pay | 6x Life Assurance Are you a Maintenance Engineer looking for excellent earning potential, long-term career opportunities and the chance to work on a genuinely interesting range of industrial machinery? Perhaps you're an experienced Electrical or Multi-Skilled Engineer looking for a new challenge, or a mechanically biased engineer keen to develop your electrical skills and progress towards becoming fully multi-skilled? We're working with a large, globally recognised manufacturer in Exeter that's continuing to invest heavily in its production facilities, equipment and engineering capabilities. With a well-established engineering department, an extensive range of specialist machinery and ongoing investment in technology and people, this is an excellent opportunity to join a business that genuinely values its engineering function. What makes this opportunity stand out? Unlike many maintenance positions where engineers spend their shifts working on the same production lines, this site offers genuine technical variety. You'll be working across a diverse range of heavy industrial, mechanical, electrical and automated equipment, with the opportunity to develop new skills, get involved in engineering projects and work alongside a large team of experienced engineers. The business also places considerable emphasis on developing its people, offering funded technical qualifications, opportunities to broaden your engineering capabilities and genuine long-term career progression. And the benefits package is one of the strongest you'll find in the local engineering market. This is what you'll be doing: As a Maintenance Engineer, you'll be responsible for maintaining, fault finding and improving a wide range of industrial production equipment. Depending on your technical background, your responsibilities will include: Carrying out planned preventative and reactive maintenance across a variety of heavy industrial and automated machinery. Electrical fault finding on three-phase systems, motors, drives, inverters, control panels, sensors, relays and contactors. Diagnosing faults on PLC-controlled equipment, including I/O diagnostics and associated electrical systems. Mechanical maintenance involving hydraulic and pneumatic systems, pumps, bearings, gearboxes, motors and associated machinery. Working with specialist production equipment, automated systems and complex mechanical assemblies. Identifying and resolving equipment faults to minimise downtime and improve plant reliability. Supporting equipment installations, upgrades and commissioning projects. Contributing to ongoing improvements in maintenance practices, equipment performance and reliability. Working closely with an experienced engineering team in a safety-focused manufacturing environment. The experience you'll bring to the team: We're interested in speaking with Mechanical, Electrical and Multi-Skilled Maintenance Engineers from a variety of industrial and manufacturing backgrounds. Ideally, you'll have: A recognised Level 3 engineering qualification, apprenticeship or equivalent technical experience. Previous experience maintaining and fault finding industrial or manufacturing machinery. Strong electrical or mechanical fault-finding capabilities within your respective discipline. For electrically biased engineers, experience with three-phase systems, motors, drives, control panels and PLC-controlled equipment. For mechanically biased engineers, experience with hydraulics, pneumatics, pumps, bearings, gearboxes and industrial machinery. A logical approach to diagnosing faults and identifying the root cause of equipment failures. A positive attitude towards safety, teamwork and continuous improvement. You don't need to arrive as a fully multi-skilled engineer. The business is equally interested in strong Mechanical Maintenance Engineers who are keen to develop their electrical capabilities. With funded electrical qualifications and ongoing technical training available, this is an excellent opportunity to broaden your skill set and progress towards becoming a fully multi-skilled engineer. And this is what you'll get in return: Alongside the opportunity to work within a technically interesting and well-invested engineering environment, you'll receive an excellent salary and benefits package. Salary up to £57,500, depending on shift pattern and technical experience. Annual Company Performance Bonus, providing additional earning potential. Enhanced Overtime Rates, with opportunities to increase your earnings. 10% Employer Pension Contribution, offering excellent long-term financial benefits. Private Healthcare Provision. Excellent Company Sick Pay, providing additional financial security. 6x Annual Salary Life Assurance. Generous Annual Leave Entitlement, including additional Christmas shutdown arrangements where applicable. Funded Technical Qualifications, including electrical training and opportunities to complete HNC-level qualifications. Career Development & Progression within a large, established engineering department. Continued Investment in production equipment, facilities and engineering technology. Various Shift Patterns Available, including days, rotating shifts and continental arrangements. Why consider this opportunity? There are plenty of Maintenance Engineer positions offering competitive salaries, but finding one that combines excellent earning potential, technical variety, long-term development and a genuinely strong benefits package isn't quite so common. This is an opportunity to join a successful manufacturer that continues to invest in its engineering department, giving engineers the tools, training and support to develop their careers. Whether you're an experienced Multi-Skilled Engineer looking for a new challenge, an Electrical Engineer who enjoys complex fault finding or a Mechanical Engineer keen to expand your electrical knowledge, we'd be interested in hearing from you. Interested? If you're looking for a well-paid engineering position with excellent benefits, varied machinery and genuine opportunities to develop your technical skills, we'd love to have a conversation. Apply with your up-to-date CV or contact Liam Reid at Yolk Recruitment for a confidential discussion. Not actively looking? Feel free to get in touch for an informal conversation about the opportunities available. Know someone who might be interested? Ask about our referral scheme. Please note, due to the high number of applications we receive, we may not be able to respond to everyone directly. If you haven't heard back within 7 days, unfortunately, your application hasn't been successful on this occasion. JBRP1_UKTJ

MULTI-SKILLED ELECTRICAL MAINTENANCE ENGINEER Job Title: Multi-Skilled Electrical Maintenance Engineer Location: Bedford Salary: £35,000 – £44,000 Shift: Days Job Role of the Multi-Skilled Electrical Maintenance Engineer A fantastic opportunity has arisen for a Multi-Skilled Electrical Maintenance Engineer to join a well-established manufacturing business based in Bedford. This is an excellent opportunity for an electrically biased engineer looking to join a successful manufacturing site, working within a fast-paced production environment with opportunities to develop their technical skills. You will be responsible for carrying out planned preventative maintenance, electrical fault-finding and reactive maintenance across a range of manufacturing machinery and equipment. Working closely with the wider engineering team, you will play a key role in minimising downtime, improving equipment reliability and ensuring production targets are achieved. This role would suit a hands-on, electrically biased Multi-Skilled Maintenance Engineer who enjoys fault-finding, problem-solving and working in a busy industrial environment. Sector – Manufacturing Non-Negotiable Requirements of the Multi-Skilled Electrical Maintenance Engineer Proven experience as a Multi-Skilled Maintenance Engineer with a strong electrical bias. Previous experience working within a manufacturing environment. A minimum Level 3 qualification in Electrical Engineering, Electrical Maintenance or a relevant engineering discipline. Requirements for the Multi-Skilled Electrical Maintenance Engineer Experience carrying out planned preventative maintenance (PPM) and reactive maintenance on manufacturing machinery. Strong electrical fault-finding and diagnostic skills. Experience working with industrial electrical systems, motors, sensors and control equipment. Ability to identify faults quickly and implement effective solutions to minimise production downtime. Good mechanical maintenance and fault-finding skills to support a multi-skilled engineering function. A proactive approach to problem-solving and continuous improvement. Strong communication skills and the ability to work effectively within an engineering team. Ability to work independently, manage priorities and maintain high standards of health and safety. Desirable Requirements of the Multi-Skilled Electrical Maintenance Engineer Experience working within a fast-paced production or FMCG environment. Knowledge of PLCs, control systems and automated machinery. Experience with continuous improvement and reliability-focused maintenance activities. Previous experience working as a Maintenance Engineer within the UK manufacturing sector. The Multi-Skilled Electrical Maintenance Engineer Will Benefit From: Working for a well-established manufacturing business. A competitive salary of £35,000 – £44,000. A days-based shift pattern, supporting a better work-life balance. Opportunities for technical training and career development. The chance to develop your skills within a supportive engineering team. If you are interested in this role and feel you have the right skills and experience, please click apply at the bottom of this advert. For further details, contact Adem Halil at Pioneer Selection . As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and conditions apply; please see our website for further details. TPBN1_UKTJ

Job Title: Interim Site Engineering Manager Sector: FMCG Manufacturing - Chilled, Frozen Food Production & Cold Storage Location: Bedfordshire (Site Based) Contract: Interim Assignment, 3 Months Initially (Potential Extension) Rate: £500-£600 per day (PAYE/Umbrella) IR35 Status: Inside IR35 Lead the Team. Drive Engineering Excellence. Protect Critical Cold Chain Operations. We are seeking an experienced Interim Site Engineering Manager to lead the engineering function within a fast-paced chilled and frozen food manufacturing operation. This opportunity requires a hands-on engineering leader with proven experience of managing engineering teams in temperature-controlled manufacturing environments, including chilled processing, frozen production, cold storage facilities, refrigeration systems and critical site services. Working closely with the Site Leadership Team, you will take responsibility for engineering performance, asset reliability, maintenance strategy, refrigeration infrastructure, compliance and continuous improvement across the site. The successful candidate will bring strong leadership capability alongside practical experience of refrigeration plant, cold chain operations and engineering reliability within a food manufacturing environment. The Opportunity – Interim Site Engineering Manager This role would suit an experienced: Site Engineering Manager Head of Engineering Chief Engineer Senior Engineering Manager Maintenance Manager Interim Engineering Leader with a background in: Chilled food manufacturing Frozen food manufacturing Cold storage operations Refrigerated warehousing Bakery, dairy, convenience food or FMCG environments You will lead the engineering strategy whilst supporting operational performance through improved asset reliability, refrigeration uptime, maintenance effectiveness and engineering team development. Key Responsibilities – Interim Site Engineering Manager Lead, coach and develop the engineering team. Drive a proactive engineering and reliability culture. Improve plant availability, OEE and maintenance performance. Ensure refrigeration and cold storage assets operate safely and effectively. Manage PPM, CBM and predictive maintenance programmes. Support ammonia and industrial refrigeration compliance requirements. Develop engineering KPIs and performance improvement plans. Lead RCA and continuous improvement activities. Manage engineering budgets and engineering resources. Deliver CAPEX and infrastructure improvement projects. Ensure compliance with all engineering, food safety, HSE and statutory requirements. Essential Experience Candidates must demonstrate experience within chilled, frozen or temperature-controlled manufacturing environments. Particular interest will be given to individuals with experience of: Ammonia refrigeration systems CO2 refrigeration systems Cold stores and refrigerated warehouses Blast freezers Spiral freezers Hardening tunnels Evaporators and condensers Defrost systems Refrigerated production environments Utilities and critical site services Food manufacturing engineering leadership What We're Looking For – Interim Site Engineering Manager Proven Engineering Management experience within FMCG manufacturing. Strong chilled or frozen food manufacturing background. Industrial refrigeration and cold chain engineering knowledge. Experience leading multi-disciplined engineering teams. Strong maintenance and reliability engineering expertise. Experience of TPM, Lean Manufacturing, WCM or similar continuous improvement methodologies. Demonstrable success improving OEE, asset reliability and engineering performance. Excellent communication and stakeholder management skills. HNC, HND or Degree qualified Engineer, ideally with a time-served apprenticeship background. Why Apply? Interim Site Engineering Manager Immediate impact opportunity. High-profile engineering leadership role. Significant autonomy and influence. Opportunity to improve engineering standards and refrigeration reliability. Supportive senior leadership team. Competitive day rate of £500-£600 per day. Immediate start available. This opportunity is particularly suited to engineering leaders with experience of chilled food, frozen food, bakery, cold storage, refrigeration plant, ammonia systems and temperature-controlled manufacturing operations. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. TPBN1_UKTJ

Senior Mechanical Engineer Bedford, UK Hybrid Working £50,000 - £60,000 + Bonus + Benefits We are looking for an experienced and innovative Senior Mechanical Engineer to help develop the next generation of fertility and pregnancy products. Based in Bedford, you will play a key role in product development from concept through to manufacture and launch, working within a multidisciplinary R&D team. This is an exciting opportunity for an Engineer who enjoys solving technical challenges, driving innovation and contributing to products that positively impact people's lives. About SPD Swiss Precision Diagnostics (SPD) is a global leader in consumer diagnostics and the joint venture between Procter and Gamble (P&G) and Abbott . Our Clearblue brand is recognised worldwide for accurate home pregnancy and fertility monitoring products. The Role As a Senior Mechanical Engineer, you will provide technical leadership across the full product lifecycle, from concept development and prototyping through to manufacture and product launch. You will work closely with cross-functional teams and external partners to develop robust, manufacturable designs while ensuring compliance with quality and regulatory standards. You will also support process engineering activities, helping transfer new products into manufacturing and drive continuous improvement initiatives. Key Responsibilities Mechanical Engineering: Lead the resolution of complex mechanical engineering challenges. Develop innovative product designs using DFM and DFA principles. Produce and maintain technical documentation, specifications and reports. Lead risk management activities including Risk Assessments and FMEA. Plan and oversee testing and validation activities. Collaborate with external suppliers and manufacturing partners, including those in China. Design and manufacture jigs, fixtures and test equipment. Develop scalable prototype assembly and manufacturing processes. Conduct engineering analyses including tolerance stack-ups and FEA. Create and maintain 3D CAD models and drawings using SolidWorks. Manage prototype and tooling development through suppliers. Support innovation and patent activities with IP specialists. Process Engineering: Design and improve manufacturing processes for safety, quality and cost efficiency. Lead continuous improvement projects using Six Sigma methodologies. Produce manufacturing documentation and work instructions. Support Design Transfer and new product introduction activities. Investigate manufacturing issues using root cause analysis and CAPA. Support process validation, equipment validation and production scale-up. About You Essential: Degree in Mechanical Engineering or a related discipline. 5+ years' experience in a manufacturing or engineering environment. Experience in product development, design transfer and manufacturing / process engineering. Experience working within regulated industries, ideally medical devices or diagnostics. Knowledge of ISO 13485, IVDR and FDA requirements. Strong analytical skills including tolerance analysis and FEA. Proficiency in 3D CAD software, ideally SolidWorks. Excellent communication and technical reporting skills. Ability to manage multiple priorities in a fast-paced environment. Desirable: Medical device or diagnostics product development experience. Knowledge of process and equipment validation. Experience applying DFM and DFA principles. Understanding of DoE, Six Sigma and continuous improvement tools. Experience supporting manufacturing optimisation and regulatory compliance. What You'll Bring: Proactive problem-solving approach. Strong leadership and stakeholder management skills. Ability to influence technical decisions and deliver results. Passion for innovation and engineering excellence. Additional Information: International travel required several times per year. What We Offer: Hybrid working (3 days on site, 2 from home) 25 days annual leave plus bank holidays Competitive pension scheme Private Medical Insurance and medical cash plan Enhanced maternity and paternity pay Health and Wellbeing programme Life assurance Free electric vehicle charging Attractive parkland location with excellent links to Cambridge, Milton Keynes and London Interested Click apply and you will be redirected to our careers page to complete your application. TPBN1_UKTJ

Berkshire Grey in Bedford, United Kingdom, is seeking a Senior Software Engineer, Robotics, focused on manipulation, to advance our robotic solutions. You will lead and mentor engineers, contribute to architecture decisions, and ensure robust, well-tested software across production environments.

Bedford | £80,000 - £90,000 + car allowance or EV scheme | Mon-Fri | On-site Engineering Manager, Maintenance Manager, Chief Engineer or Head of Engineering: ready to own a site's engineering, not just keep it running? The role • Lead and develop a team of 20 engineers, building accountability and a proactive safety culture, • Build a strong planned and preventive maintenance strategy that cuts unplanned downtime, • Drive reliability, availability and Lean / CI using clear KPIs and data, • Deliver CAPEX and engineering projects from plan to handover, • Own the engineering budget, stores and compliance, • Work with Production and influence at senior level, reporting to the Operations Director You'll bring • An HND or degree in Mechanical, Electrical or a related engineering discipline, • A track record leading an engineering or maintenance function in manufacturing (FMCG a plus), • Proven results in reliability, PPM and CMMS-led maintenance, • Experience delivering CAPEX projects and managing budgets, • A visible, hands-on leadership style that develops people What's on offer • £80,000 - £90,000 basic, plus a car allowance or electric car scheme, • Real autonomy to shape the engineering strategy, • Long-term career development within an international business #J-18808-Ljbffr

NBCUniversal is seeking a Senior Manager Ride & Show Mechanical Engineer to lead technical management for attractions, ensuring safety and high‑quality deliverables. You will drive design, production, installation, and acceptance testing of ride and show systems to meet Universal specifications and project goals. The role involves coordinating with vendors and cross‑functional teams to manage scope, risk, and schedule, while upholding rigorous safety standards across multiple attractions. #J-18808-Ljbffr

What if the firmware you write today controlled power delivery to aircraft at airports in 60+ countries tomorrow? At TLD Powervamp, a business in full growth and the aviation industry’s pioneer in zero-emission ground power, you will shape the embedded intelligence at the heart of our GSE products : from initial prototyping to production at scale, and from our Kempston site to ramps worldwide. Join our Engineering team and build the firmware that drives the next generation of electric, eco-friendly Ground Support Equipment. Reporting to the Senior Expert Engineer, you design, develop, and validate the embedded software and firmware that drives Powervamp’s GSE product range. You work across the full development cycle — from architectural design through hands‑on testing to production deployment — in close collaboration with hardware designers and a multidisciplinary engineering team. Your mission: deliver robust, reliable, and well‑documented embedded systems that meet the demanding performance and safety requirements of the aviation ground support environment. Concretely, you will: • Design, develop, and validate firmware: code, test, and debug system software and firmware in embedded systems; troubleshoot hardware/software interactions from signal level to system behaviour to ensure correct and robust operation in the field., • Drive software architecture: participate in architectural design decisions and contribute to technical specifications and design reviews that define how our products behave on the ramp., • Optimise and maintain code quality: analyse and refactor new and existing codebases for performance, reliability, and maintainability; apply structured code management and peer review workflows using version control tools., • Perform hands‑on testing and debugging: validate embedded systems with industry‑standard instruments including oscilloscopes and logic analysers; ensure your code meets functional and reliability requirements before it reaches a live airport environment., • Support hardware development: assist with PCB layout, design, and validation; contribute to Electrical CAD drawings including cable harness drawings; participate in electronic component selection and validation — bridging firmware and the hardware it runs on., • Accelerate new product introduction: support the transition from prototype to production; maintain clear and comprehensive technical documentation for code and system architecture to enable seamless handover and long‑term maintainability., • Bachelor’s degree (BEng/BSc) in Electrical Engineering or Computer Science., • Solid embedded C experience, ideally on Microchip 16- and 32-bit devices; experience with STM32/ARM platforms is a strong advantage., • Hands‑on experience with embedded debugging tools: oscilloscopes, logic analysers, and similar instruments., • Electrical and electronic design background; PCB development experience (e.g. Altium Designer) is advantageous., • Familiarity with version control systems (Git/GitHub/GitLab) and structured software configuration management practices., • Methodical, detail‑oriented approach to problem‑solving: you read signal traces, isolate root causes, and document your findings clearly., • Good communicator and team player — comfortable contributing to cross‑functional technical reviews and working alongside hardware and mechanical engineers., • Field and product focus: you think beyond the bench — aware of how your firmware behaves in real‑world aviation service conditions and what that means for reliability, safety, and aftermarket support., • Adaptability: comfortable switching between new product development and legacy code maintenance, firmware and hardware support tasks, without losing sight of your delivery commitments., • Proactive and outcome‑driven, with a sense of initiative and a continuous improvement mindset. You report to the Senior Expert Engineer at Powervamp, Kempston, and work as part of a multidisciplinary engineering team spanning embedded, electrical, and mechanical disciplines. You collaborate closely with hardware designers, PCB developers, and product engineers — as well as with TLD engineering teams worldwide. Hierarchy at TLD is short and accessible: your technical contributions shape how our products perform in the field, and the path from hands‑on engineering to broader technical ownership is open to those who deliver. TLD Powervamp is a business in full growth: new products are being developed, zero‑emission GSE demand is accelerating, and the firmware you write will control ground power units trusted by airlines and airports in 60+ countries. You will work across the full embedded stack — from bare‑metal C on Microchip and STM32 microcontrollers to 400 Hz frequency converters and 28 V DC battery management systems — in an environment where technical depth is valued, hardware curiosity is rewarded, and international exposure comes with the role. At TLD, hierarchy is short: your voice carries weight. If you are energised by embedded challenge, hardware‑software co‑design, and a real contribution to the decarbonisation of aviation ground support — we’d love to hear from you. #J-18808-Ljbffr

The Structural Integrity Engineer (SIE) is a senior technical specialist who analyses, develops, and validates the mechanical integrity of complex structural systems across light‑weight and heavy‑weight platforms. The role encompasses metallic, non‑metallic, and composite materials, covering design, production, testing, and maintenance phases. Core responsibilities include damage‑tolerance, durability, and structural modelling across dynamics, loads, stability, stress fatigue and thermal analyses. The duty cycle uses a broad array of engineering tools, notably MSC Nastran, MSC Marc, Siemens Simcenter, Beta CAE, ANSA, and PTC Creo. The Structural Integrity Engineer will be a Subject Matter Expert in structural analysis and integrity decision‑making, operating within the Structural Integrity Group, a sub‑function of the Engineering Department. A key requirement of this role is the ability to obtain and maintain a high‑level security clearance. If you do not currently hold the required clearance, we can support you through the application process. DV Clearance will eventually be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately. This position will require an on-site presence in Ampthill, Bedfordshire. Core responsibilities will include: • Developing and validating high‑fidelity finite‑element models for metallic, composite and hybrid structures., • Executing static, dynamic, vibrational, thermal and fluid‑structure interaction analyses., • Performing damage‑tolerance and fatigue assessments., • Authoring concise strength‑summary reports and risk assessments that satisfy MoD and customer standards., • Translating analysis outcomes into manufacturing instructions and inspection plans., • Leading knowledge‑transfer workshops and maintaining model libraries., • Championing process improvement through new software, material databases and automation scripts., • Representing the Company at design reviews, client briefings and external audits., • Proven experience of industrial structural‑analysis experience on metallic and composite parts., • BEng (Hons) in Mechanical/Aerospace or equivalent., • Proficient in MSC Nastran and pre‑processors such as Patran, Apex, Simcenter, or ANSA., • Experienced in static, dynamic, linear and non‑linear analyses., • Skilled in hand‑based stress calculations and fatigue life prediction., • Extensive experience modelling aluminium, titanium, steel and high‑strength alloys for both light‑ and heavy‑weight systems., • Basic knowledge of composite lay‑up, ply‑by‑ply modelling and defect effects., • Capable of drafting clear, concise strength‑summary reports and risk assessments., • Comfortable working collaboratively with design, manufacturing, testing and quality teams., • Skilled in scripting (Python, batch) and use of high‑performance computing to streamline analyses., • Candidates must be able to undergo the process to achieve a Secret Clearance and be willing to go through the process to achieve a Developed Vetting Clearance. At Lockheed Martin our employees come first and therefore your physical, mental and financial wellbeing matters to us. On top of working in a highly supportive, friendly, respectful environment you can expect so much more. We are an employer in support of and offering Flexible working with the option to also work a 4 day week depending on business requirements, where you have the option of Fridays off. Lockheed Martin (UK) Ampthill is a rapidly changing, dynamic part of the Lockheed Martin Corporation with both domestic and international customers. It consists of three business areas focusing on Vehicles, Special Projects and Mission Support, which provide a variety of products and services to the MoD and other customers including the Scout and support to the Land Environment Air Picture Provision capability. We are looking for talented individuals to join the company, in return, we can offer an exciting and challenging career path. Please note that Lockheed Martin Ampthill work an 8 day fortnight with the site closed every Friday. Lockheed Martin recognises and actively promotes the benefits of a diverse workforce and is committed to treating all employees with dignity and respect regardless of race, gender, disability, age, sexual orientation, religion or belief. Discrimination on any of these grounds is expressly forbidden. We therefore welcome applications from all sections of the community. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call . #J-18808-Ljbffr

Lead, coach and develop the engineering team. Drive a proactive engineering and reliability culture. Improve plant availability, OEE and maintenance performance. Ensure refrigeration and cold storage assets operate safely and effectively. Manage PPM, CBM and predictive maintenance programmes. Support ammonia and industrial refrigeration compliance requirements. Develop engineering KPIs and performance improvement plans. Lead RCA and continuous improvement activities. Manage engineering budgets and engineering resources. Deliver CAPEX and infrastructure improvement projects. Ensure compliance with all engineering, food safety, HSE and statutory requirements. We are seeking an experienced Interim Site Engineering Manager to lead the engineering function within a fast-paced chilled and frozen food manufacturing operation. This opportunity requires a hands-on engineering leader with proven experience of managing engineering teams in temperature-controlled manufacturing environments, including chilled processing, frozen production, cold storage facilities, refrigeration systems and critical site services. Working closely with the Site Leadership Team, you will take responsibility for engineering performance, asset reliability, maintenance strategy, refrigeration infrastructure, compliance and continuous improvement across the site. The successful candidate will bring strong leadership capability alongside practical experience of refrigeration plant, cold chain operations and engineering reliability within a food manufacturing environment., Candidates must demonstrate experience within chilled, frozen or temperature-controlled manufacturing environments. • Ammonia refrigeration systems, • CO refrigeration systems, • Cold stores and refrigerated warehouses, • Blast freezers, • Spiral freezers, • Hardening tunnels, • Evaporators and condensers, • Defrost systems, • Refrigerated production environments, • Utilities and critical site services, • Food manufacturing engineering leadership, Proven Engineering Management experience within FMCG manufacturing., • Strong chilled or frozen food manufacturing background., • Industrial refrigeration and cold chain engineering knowledge., • Experience leading multi-disciplined engineering teams., • Strong maintenance and reliability engineering expertise., • Experience of TPM, Lean Manufacturing, WCM or similar continuous improvement methodologies., • Demonstrable success improving OEE, asset reliability and engineering performance., • Excellent communication and stakeholder management skills., • HNC, HND or Degree qualified Engineer, ideally with a time-served apprenticeship background., • Immediate impact opportunity., • High-profile engineering leadership role., • Significant autonomy and influence., • Opportunity to improve engineering standards and refrigeration reliability., • Supportive senior leadership team., • Competitive day rate of £500-£600 per day., • Immediate start available., • This opportunity is particularly suited to engineering leaders with experience of chilled food, frozen food, bakery, cold storage, refrigeration plant, ammonia systems and temperature-controlled manufacturing operations. #J-18808-Ljbffr

Join one of the world’s most recognisable and established drinks brands as they significantly expand their UK manufacturing operations to meet growing demand. Our client has brought over 150 years of heritage to the UK, establishing their first international production site in one of their strongest markets. Following a £70m investment, the state-of-the-art facility has been transformed, doubling production capacity and introducing new equipment and automation. With the site entering an exciting period of expansion and increased production, they are looking for Multi Skilled Maintenance Engineers to join the team on a contract basis. As a Multi Skilled Maintenance Engineer, you'll carry out planned preventative maintenance (PPM), reactive maintenance and fault finding across high-speed automated production machinery. You’ll be responsible for: • Diagnosing and repairing mechanical and electrical breakdowns, • Carrying out planned preventative maintenance (PPM), • Fault-finding across automated production machinery, • Working with conveyors, motors, pumps, gearboxes, sensors and other manufacturing equipment, • Responding quickly to breakdowns and minimising equipment downtime, • Supporting continuous improvement and equipment reliability, • Working closely with Production and Engineering teams, • Maintaining high standards of health & safety We're looking for a hands‑on Multi Skilled Maintenance Engineer with: • Experience in manufacturing, FMCG, food, automotive or another automated environment, • Mechanical and/or electrical maintenance experience, • Strong experience across PPM, reactive and breakdown maintenance, • Experience working with production machinery and automated equipment, • Strong fault‑finding and diagnostic skills, • An engineering qualification such as NVQ Level 3, City & Guilds, BTEC or equivalent, • PLC experience is advantageous but not essential Engineers from a range of manufacturing backgrounds will be considered, provided you have strong hands‑on maintenance experience within an automated, industrial environment. • Monday–Friday rotating 3‑shift pattern, • 8‑hour shifts across mornings, lates and nights, • No weekends, • £350 - £400 p/day, • Contract opportunity with immediate availability, • Opportunity to work within a modern, highly automated manufacturing facility, • Exposure to new equipment, automation and production technology, • Multiple vacancies available This is a fantastic opportunity for an experienced Maintenance Engineer to join a major manufacturing operation during a significant period of growth and expansion. #J-18808-Ljbffr

Tooling Design Engineer Ampthill, Bedfordshire (Onsite) £40-£50 per hour 12-Month Contract 37.5 Hours Per Week | Monday to Thursday (4-Day Week) Inside IR35 Active SC Clearance Required An exciting opportunity has arisen for an experienced Tooling Design Engineer to join a leading defence engineering programme. Working within the Operations Engineering team, you will support the full product lifecycle, from prototype development and manufacturing build through to production support and product maturity. This role offers the chance to work on complex engineering projects, designing and developing tooling, jigs, fixtures and manufacturing aids that improve quality, efficiency and production performance. You will play a key role in supporting manufacturing operations while driving continuous improvement and right-first-time quality. • Design and develop tooling, jigs and fixtures for manufacturing applications., • Support tooling requirements across NC machining and composite lay-up activities., • Create technical requirement specifications and manufacturing documentation., • Produce manufacturing BOMs, routings and detailed process instructions., • Support new product introduction and ongoing production programmes., • Work closely with Production Engineering, Industrial Engineering and wider project teams., • Drive manufacturing improvements, cost reduction initiatives and quality enhancements., • Support capital equipment projects from definition through to implementation., • Proven tooling design experience within a manufacturing environment., • Experience designing tooling solutions from concept through to production release., • Strong manufacturing knowledge across CNC machining, composites, fabrication, mechanical assembly or additive manufacturing., • Proficiency using CREO to create 3D models and engineering drawings., • Experience using Windchill for document control and change management., • Ability to produce engineering drawings to BS8888 standards., • Working knowledge of GD&T, DFM/A and PFMEA principles., • Experience preparing manufacturing BOMs, routings and process documentation., • Understanding of Lean Manufacturing and continuous improvement methodologies., • Strong analytical and problem-solving skills., • Excellent communication and stakeholder management abilities., • Collaborative team player with a proactive approach., • Ability to work independently and influence positive change., • Highly organised with a focus on quality, delivery and customer requirements. Please note: Due to the nature of the programme, candidates must hold active SC Security Clearance and be available to work onsite in Ampthil #J-18808-Ljbffr

We’re seeking a Senior Mechanical Design Engineer (Tooling) to join our team based in Ampthill, Bedfordshire. The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to Design, develop and implement industrial tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. You will be required to have a good working knowledge of CAD design tools such as CREO and Windchill. You will have design involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Mechanical Design Engineer (Tooling) is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. You will drive a proactive approach to right first time quality to promote growth, will enhance the reputation of the business through exceptional quality standards and contribute towards a significant reduction in overall manufacturing costs. • Develop manufacturing tooling within any of the following technologies;, • Assembly, Integration and Test, • Machining, • Additive Manufacturing, • Designing any new tooling & fixturing requirements, • Experienced in the creation of Technical Requirement Specifications, • Creation of detailed process instructions, • Creation of Manufacturing BOM’s / routings to aid ease of manufacture., • Active participation in customer and programme meetings., • Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance., • Supporting full rate production of a range of products aligned to the LMUK Ampthill Business requirements., • Close liaison of activities with Industrial Engineering, Production Engineering and other functions., • Support with the business process reviews and generation / update of relevant documentation., • The successful candidate must be able to achieve the appropriate level (DV) of security clearance., • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings, • Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills., • Personal accountability, building relationships, planning for results, customer first, adaptability., • Knowledge of Manufacturing technologies., • Good communication skills that can sell and influence to a range of audiences internally and externally with the ability to work with all levels of the business., • An independent thinker, able to take an assertive stance to enforce the key requirements of quality and the customer., • Demonstrate a level of design and manufacturing process industry experience, • Knowledge of, Lean Manufacturing, Six Sigma methodology, Quality toolset experience., • An understanding of GD&T (Geometric Dimensioning & Tolerances) with the ability to identify key characteristics and datum structures., • Familiar with the use of CAD software (CREO) to generate technical drawings, • Experience of preparing operational documentation and manufacturing data-packs., • Experience of driving change in process, behaviour and culture., • Awareness of DFM/A and PFMEA principles and the use of them in a practical application to support Industrial Engineering activity., • Strong analytical skills., • Key competences: Personal accountability, building relationships, planning for results, customer first, adaptability. #J-18808-Ljbffr

NBCUniversal in the United Kingdom is seeking an experienced engineer to support or lead ride/show system projects at Universal United Kingdom Resort. You will manage bids, design, production, installation, testing, and commissioning, with a focus on ride and show control systems. The role involves steering vendors, translating creative intent into technical documents, and ensuring safety and compliance across project phases. #J-18808-Ljbffr

Lexington Medical, Inc. is hiring an Electrical Engineer in Bedford, MA to design and develop embedded electrical systems for our AEON™ surgical stapling platform. As an Electrical Engineer at Lexington Medical, you will work hands‑on across the hardware development lifecycle, from circuit design and PCB development through prototyping, testing, debugging, verification, and production. Lexington Medical, Inc. is a medical device company designing and manufacturing surgical stapling technology at our headquarters in Bedford, Massachusetts, just outside Boston. Our AEON™Endostapleris an FDA‑cleared, minimally invasive surgical stapler used in operating rooms around the world. With engineering, manufacturing, and quality working closely together, engineers stay close to the product and see their work move from an idea through prototyping, testing, manufacturing, and ultimately intothe operating room. As an Electrical Engineer at Lexington Medical, you will join an R&D team developing embedded electrical systems for our powered surgical stapling devices. You will contribute to schematic capture, PCB design, componentselection, hardware bring‑up, debugging, testing, and system‑level integration while working closely with firmware, mechanical, and manufacturing engineers. The systems you will work onoperateunder real‑world constraints including power, size, reliability, manufacturability, and regulatory requirements. You will have the opportunity to work across the full development process and see how your electrical designs perform as part of a complete electromechanical medical device. This is a good fit for an electrical engineer who wants hands‑on hardware experience, broad technical exposure, and the opportunity to develop products where disciplined engineering and attention to detail directlyimpactperformance and patient care. • Design, develop, and support embedded electrical subsystems for electromechanical surgical devices., • Assist in schematic capture, PCB design (rigid, flex, rigid‑flex), and component selection., • Support mixed‑signal, microcontroller‑based designs, including power management, sensing, and actuation circuits., • Participate in hardware bring‑up, debugging, bench testing, and system‑level integration., • Collaborate with firmware and mechanical engineers to ensure robust hardware‑software integration., • Contribute to electrical verification and validation activities, including test execution and documentation., • Support design control documentation, including DHF elements, traceability, and risk documentation., • Assist with troubleshooting fielded products and implementing well‑documented design updates., • Learn and apply best practices for design quality, documentation, and change control in a regulated environment., • B.S. in Electrical Engineering or related field., • 1+ years of relevant experience, including internships or co‑ops in embedded systems hardware design, preferably in a regulated industry., • Strong fundamentals in circuit analysis, electronics, and microcontroller‑based systems., • Experience or coursework in schematic capture and PCB design., • Familiarity with mixed‑signal circuits, power management, and basic embedded hardware concepts, • Exposure to structured design documentation and testing practices; regulated industry experience is a plus., • Ability to work collaboratively across disciplines and learn quickly in a fast‑paced engineering environment., • Strong attention to detail. This position is based at our headquarters in Bedford, Massachusetts, in the Greater Boston area, and is an on‑site role. $80,000 to $10,000 USD Visitour Candidate Journey page to learn what to expect from our hiring process. $80,000—$110,000 USD #J-18808-Ljbffr

Are you ready to take the lead in shaping the future of electronic and firmware development? Our client, an innovative technology business in Bedford, is looking for a Lead Electronic Design Engineer to join their team. This is a fantastic opportunity to step into a pivotal role, driving design excellence today and building a team for tomorrow. • Take ownership of electronic design, from concept through to production., • Oversee firmware development, ensuring integration and functionality align with business goals., • Work closely with senior stakeholders to define roadmaps and technical direction., • In the longer term, recruit and lead a team of engineers, heading up electronic and firmware development., • Degree-level education in Electronics Hardware Engineering (or equivalent senior-level experience)., • Strong background in mixed signal circuit design., • Expertise in schematic capture, PCB layout, and design using Altium., • Solid understanding of EMC design principles and designing to meet industry regulations., • Experience working with firmware development, with the ability to guide and oversee integration., • The ability to balance leadership with being technically hands-on., • The chance to shape and grow a department within an established company., • On-site role in Bedford with direct access to cutting-edge projects., • A career-defining opportunity for someone ready to step up and lead. Interested? Get in touch with Lewis Phillips at Verso Recruitment: Phone: Email: • Seniority level: Mid-Senior level, • Employment type: Full-time, • Industries: Appliances, Electrical, and Electronics Manufacturing; Computers and Electronics Manufacturing; Retail Appliances, Electrical, and Electronic Equipment #J-18808-Ljbffr

Berkshire Grey is seeking a Principal Software Engineer to lead the manipulation capabilities of the Scoop program. You will shape architecture, set technical direction, and deliver high‑performance software enabling robots to interact with real environments. You will collaborate across motion planning, kinematics, control, and multi‑arm coordination, driving production‑level robotics software from concept to deployment and ongoing support. #J-18808-Ljbffr

• In the role of Senior Software Engineer, Robotics, focusing on manipulation, you will play a pivotal role in enhancing the capabilities of our robotic solutions, • Your work will involve developing advanced software that enables robots to interact with their environments in completing complex, real-world tasks, • Design, develop, and support advanced robotic manipulation software deployed in production environments, • Create high-performance software solutions for robotic manipulation, focusing on motion planning, kinematics, control strategies and motion execution, to enhance our robotic solutions, • Utilize and extend simulation software environments to test and refine manipulation development, ensuring expected and robust performance, • Work closely with hardware engineers, product managers, and other software teams to integrate capabilities into our broader robotic systems, • Provide technical leadership and mentorship to junior engineers, • Clearly and proactively communicate technical priorities and status, • Healthcare - Full medical, dental and vision. Life insurance, gym stipends and wellness programs, • Vacation - We value hard work and we like to have fun. Take time when you need it, • Recognition - Peer shout outs, achievement celebrations and leadership awards let you know you've made a difference, • Retirement - Stock options and generous 401(k) matching, • Nutrients - Lunch is delivered daily, a plethora of snacks, gourmet coffee, Soylent, and top-shelf beverages Experience with version control (Git), code reviews, issue tracking (Jira) and automated testing (unit, integration, and hardware-in-the-loop)Familiarity with system design principles and design patternsUnderstanding parallel/distributed systems and asynchronous/concurrent programmingAbility to handle ambiguous or ill-defined problems, and scope, plan and implement solutions for themBachelor's degree in Robotics, Computer Science, or a closely related fieldExperience in designing and developing RESTful interfaces, gRPC services/clients, etc4+ years of professional software development experience in a production environmentAbility to work collaboratively in a team setting and communicate effectively with both technical and non-technical stakeholdersExperience in designing and implementing software and algorithms for motion planning, motion execution, multi-arm coordination, robotic kinematics, and/or environment representationStrong development expertise in PythonStrong drive to deliver well-designed, well-implemented and well-tested solutions to meet internal and external requirementsFamiliarity with Python's asyncio libraryExperience with NoSQL databases (e.g., MongoDB)Programming experience in C++Familiarity with the Linux ecosystemFamiliarity with robotics simulation tools and test environmentsExperience with development and integration of drivers for robotic hardware, particularly robotic armsExperience with ROS/ROS26+ years of experience in software development in a production environmentMaster's degree in Robotics, Computer Science or a closely related field #J-18808-Ljbffr

• A Senior DevOps Networking Engineer will design, manage and troubleshoot these complex interconnected systems in hybrid environments for customers and employee innovation systems, • They manage and improve the communication between the operational and developmental sides of the software development process, • Main duties include configuring production and pre-production compute resources, troubleshooting performance or functional issues, planning compute architecture and testing new ideas, • We are a collaborative engineering culture, your presence must make us better, • Listen to and guide teams in designing, building, testing and deploying changes to existing environments, • Manage traditional networking equipment, firmware updates, connectivity and design for customers’ robotic systems, • Troubleshoot and identify root cause with use of packet captures and log analysis on a broad range of problems, • Cloud efficiency: ensure availability, economy, performance, security, and scalability of AWS / GCP production systems, • Identify manual processes that can be automated, • Maintain and improve the company’s cloud infrastructure, • Evaluation of new technology alternatives and vendor products, • Envision and design secure and usable systems while gaining shared vision from key stakeholders, • Providing recommendations for architecture and process improvements, • Healthcare - Full medical, dental and vision. Life insurance, gym stipends and wellness programs, • Vacation - We value hard work and we like to have fun. Take time when you need it, • Recognition - Peer shout outs, achievement celebrations and leadership awards let you know you’ve made a difference, • Retirement - Stock options and generous 401(k) matching, • Nutrients - Lunch is delivered daily, a plethora of snacks, gourmet coffee, Soylent, and top-shelf beverages The ideal candidate would be able to function as a troubleshooter and communicator to a variety of different professional audiencesThe person in this role will be able to move smoothly between networking, compute hardware, infrastructure as code, cloud and kubernetes environmentsTerraform, Kustomize, shell scripting and/or pythonClear written and verbal communicationTroubleshoot code and improve performance, particularly in Kubernetes and Terraform settingsParticipates in an on-call rotationAble to assist customers with Networking and system troubleshooting in order to resolve robotic system issuesLinux, Kubernetes — operating system administrationExperience in creation of highly automated infrastructureBring positive creative energy to the teamExperience with multi-tier architectures: load balancers, caching, web servers, application servers, databases, and networkingDemonstrated competence with Linux Systems Engineering, Networking and Infrastructure as codeLead global deployments, giving special attention to Kubernetes, Terraform, Juniper networking, and TCP/IPJuniper / Cisco / Palo Alto / ZscalerManage your own time and work well both independently and as part of a team • DevOps engineer: 3 years, • Linux, Docker and Kubernetes: 3 years, • AWS or GCP: 1 year, • Networking: 3-5 years #J-18808-Ljbffr

Logical Resources FMCG, Bedford (UK), is hiring a Multi Skilled Maintenance Engineer on a contract basis to support a high-speed, automated manufacturing facility. You will perform PPM, reactive maintenance and fault finding on production machinery, while ensuring safety standards and close collaboration with Production and Engineering teams. Experience in FMCG or automated environments, NVQ3/BTEC/C&G qualifications, and PLC familiarity are valued. #J-18808-Ljbffr

Reporting to the Senior Expert Engineer, you design, develop, and maintain the electrical, electronic and power systems that drive Powervamp’s GSE product range. You work across the full development cycle — from architectural design through hands‑on testing to production deployment — in close collaboration with hardware designers and a multidisciplinary engineering team. Your mission: deliver high quality, accurate, and well‑documented integration of hardware with control systems that meet the demanding performance and safety requirements of the aviation ground support environment. • Equipment Design: Develop and update electrical schematics, wiring diagrams, and component layouts for GSE using CAD software (e.g., SEE Electrical)., • System Integration: Integrate electrical components into mechanical systems, designing robust electrical harnesses and cable assemblies., • Testing & Validation: Develop test procedures and execute tests, analyse data, and troubleshoot faults to certify operational reliability., • Compliance & Safety: Ensure all electrical designs comply with applicable standards and safety regulations., • Documentation: Prepare comprehensive technical reports, Bills of Materials (BOMs), operating manuals, and maintenance schedules., • Cross-Functional Collaboration: Partner with mechanical engineers, software developers, manufacturing teams, and suppliers to drive project delivery., • Schematic Capture: Design electronic circuit schematics and optimize board layouts for performance and manufacturability., • Integration: Connect sensors, motors, and drives to PLCs, and design Human Machine Interfaces (HMIs) for operators., • Technical: Proficiency in schematic capture, PLC control systems, and low/high voltage systems., • Bachelor’s degree (BEng/BSc) or HND/HNC in Electrical or Electronic Engineering., • 3+ years of experience in electrical engineering in a manufacturing environment — ideally in heavy equipment, industrial systems, or aviation ground support., • Hands on approach – comfortable supporting prototype builds, capturing information and transferring to CAD., • Strong understanding of power distribution, low voltage systems, PLCs, and motor controls., • Experience with Controller Area Network (CAN) communication protocol and systems., • Methodical, detail-oriented approach to problem-solving: you read signal traces, isolate root causes, and document your findings clearly., • Good communicator and team player — comfortable contributing to cross-functional technical reviews and working alongside hardware and mechanical engineers., • Field and product focus: you think beyond the bench — aware of how your system behaves in real-world aviation service conditions and what that means for reliability, safety, and aftermarket support., • Adaptability: comfortable switching between new product development and legacy maintenance, schematic and harness support tasks, without losing sight of your delivery commitments., • Proactive and outcome-driven, with a sense of initiative and a continuous improvement mindset. You report to the Senior Expert Engineer at Powervamp, Kempston, and work as part of a multidisciplinary engineering team spanning embedded, electrical, and mechanical disciplines. You collaborate closely with hardware designers, PCB developers, and product engineers — as well as with TLD engineering teams worldwide. Hierarchy at TLD is short and accessible: your technical contributions shape how our products perform in the field, and the path from hands‑on engineering to broader technical ownership is open to those who deliver. TLD Powervamp is a business in full growth: new products are being developed, zero-emission GSE demand is accelerating, and the firmware you write will control ground power units trusted by airlines and airports in 60+ countries. You will work across the full embedded stack — from bare-metal C on Microchip and STM32 microcontrollers to 400 Hz frequency converters and 28 V DC battery management systems — in an environment where technical depth is valued, hardware curiosity is rewarded, and international exposure comes with the role. At TLD, hierarchy is short: your voice carries weight. If you are energised by embedded challenge, hardware-software co-design, and a real contribution to the decarbonisation of aviation ground support — we’d love to hear from you. What if the products you engineer today powered aircraft at airports in 60+ countries tomorrow? At TLD Powervamp , a business in full growth and the aviation industry’s pioneer in zero-emission ground power, you will own a full product lifecycle as Product Line Engineer: from first concept to production at scale, and from our Bedford site to ramps worldwide. Join our Engineering team and shape the next generation of electric, eco-friendly Ground Support Equipment. • Télétravail, • 13ème mois, • Horaires flexibles #J-18808-Ljbffr

2026-10-04T00:00:00 Location: Bedford, Bedfordshire, GB, MK40 1 Availability: Any Application Deadline: 2026-11-02T14:00:11.26 GM Performance Power Units - Concord, NC ESME Application Engineer GM Performance Power Units (GM PPU) is seeking a highly skilled and motivated ESME Application Engineer to join our innovative engineering team in Concord, NC. This vital role focuses on safely building high-performance battery systems with the utmost quality. • Lead the design and optimization of the manufacturing process of the Energy Store (ES) and Energy Store Main Enclosure (ESME)., • Design and analyze production processes to ensure personnel safety at all times., • Work with the Quality Department to develop in-process and end-of-line quality procedures for various assembly processes including equipment planning, evaluation, and selection., • Actively contribute to the design process of the Energy Store (ES) and Energy Store Main Enclosure (ESME) to achieve Built-In Quality., • Conduct root cause analysis for any problems found throughout the build process and communicate findings to relevant team members while documenting learnings., • Create and maintain manufacturing operation work instructions., • Document and communicate assembly process developments and innovations clearly., • Work with the ERS Assembly Manager and High Voltage Safety Supervisor to ensure adherence to safety, quality, and operational standards., • Bachelor's degree in Engineering, Engineering Technology, or related field., • 2+ years of relevant industry experience in battery pack assembly engineering., • Experience programming industrial robots., • Proficient in 3D CAD software (CATIA, NX, SolidWorks, or similar)., • Excellent verbal and written communication skills with ability to work effectively in multidisciplinary teams., • Self-driven with a demonstrated ability to lead projects independently., • Experience in automotive, aerospace, motorsport, or other high-performance industries is a strong plus but not mandatory., • Proven experience in high-voltage system assembly, ideally in Formula 1, Formula E, or advanced automotive sectors., • Professional experience with one or more types of welding processes., • Knowledge of Design for Manufacture/Assembly (DFM/DFA) principles and tooling/jig design for motorsport or low volume high performance prototyping., • Knowledgeable about using PLCs for safety or automation related tasks., • Familiarity with F1 technical regulations, particularly those governing ESME components and power unit integration., • Strong, hands-on engineering mindset with a bias toward building, testing, and iterating., • Proactive, motivated, and able to take ownership of projects and contribute constructively to the team., • Excellent problem solver with strong analytical and critical thinking skills., • Effective communicator and collaborator, comfortable working in cross-functional environments., • Detail-oriented with commitment to high-quality work and continuous learning. Drive the Future of Motorsport with GM PPU! At GM Performance Power Units, we're more than an engineering team - we're shaping the future of Formula 1 technology. Join a culture where collaboration sparks creativity and innovation empowers breakthrough performance. Every contribution drives our competitive edge on the track. If ready to revolutionize power unit electronics with a cutting-edge, high-energy team, GM Performance Power Units and all affiliated companies are Equal Opportunity employer(s). Minorities, women, veterans, and individuals with disabilities are encouraged to apply. For more information regarding the EEOC, please visit. #J-18808-Ljbffr

Tooling Design Engineer Ampthill, Bedfordshire (Onsite) £40-£50 per hour 12-Month Contract 37.5 Hours Per Week | Monday to Thursday (4-Day Week) Inside IR35 Active SC Clearance Required An exciting opportunity has arisen for an experienced Tooling Design Engineer to join a leading defence engineering programme. Working within the Operations Engineering team, you will support the full product lifecycle, from prototype development and manufacturing build through to production support and product maturity. This role offers the chance to work on complex engineering projects, designing and developing tooling, jigs, fixtures and manufacturing aids that improve quality, efficiency and production performance. You will play a key role in supporting manufacturing operations while driving continuous improvement and right-first-time quality. • Design and develop tooling, jigs and fixtures for manufacturing applications., • Support tooling requirements across NC machining and composite lay-up activities., • Create technical requirement specifications and manufacturing documentation., • Produce manufacturing BOMs, routings and detailed process instructions., • Support new product introduction and ongoing production programmes., • Work closely with Production Engineering, Industrial Engineering and wider project teams., • Drive manufacturing improvements, cost reduction initiatives and quality enhancements., • Support capital equipment projects from definition through to implementation., • Proven tooling design experience within a manufacturing environment., • Experience designing tooling solutions from concept through to production release., • Strong manufacturing knowledge across CNC machining, composites, fabrication, mechanical assembly or additive manufacturing., • Proficiency using CREO to create 3D models and engineering drawings., • Experience using Windchill for document control and change management., • Ability to produce engineering drawings to BS8888 standards., • Working knowledge of GD&T, DFM/A and PFMEA principles., • Experience preparing manufacturing BOMs, routings and process documentation., • Understanding of Lean Manufacturing and continuous improvement methodologies., • Strong analytical and problem-solving skills., • Excellent communication and stakeholder management abilities., • Collaborative team player with a proactive approach., • Ability to work independently and influence positive change., • Highly organised with a focus on quality, delivery and customer requirements. Please note: Due to the nature of the programme, candidates must hold active SC Security Clearance and be available to work onsite in Ampthil #J-18808-Ljbffr

I’m recruiting a Senior Mechanical Design Engineer to join the Operations Engineering team in Ampthill. This is an opportunity to take ownership of tooling design across the product lifecycle, supporting projects from prototype development through to production and ongoing product support. You’ll design and implement tooling such as jigs, fixtures, gauges, dies, prototype models and machine attachments. Working with teams across the business, you’ll help improve manufacturing quality, increase production yield and reduce costs. You’ll also act as a technical point of contact for tooling, offering advice, solving problems and coordinating engineering activity. In this role, you’ll: • Develop tooling for assembly, integration and test, machining, composite layup and additive manufacturing., • Create technical requirement specifications, process instructions, manufacturing bills of materials and routings., • Support production and programme delivery, including capital equipment requirements from definition through to acceptance., • Work closely with Industrial Engineering, Production Engineering and other teams., • Contribute to customer and programme meetings, process reviews and updates to engineering documentation., • Promote right-first-time quality and practical continuous improvement. I’m looking for someone with: • Mechanical design and manufacturing process experience., • CAD experience, ideally with Creo, and the ability to produce technical drawings., • An understanding of GD&T, including key characteristics and datum structures., • Knowledge of Lean Manufacturing, Six Sigma and quality tools., • Awareness of DFM/A and PFMEA principles., • Experience preparing operational documentation and manufacturing data packs., • Strong communication, analytical and influencing skills, with confidence working across different levels of an organisation., • A proactive approach to problem-solving, quality and process improvement. The successful candidate must be able to obtain the appropriate level Security Check (SC) clearance. #J-18808-Ljbffr

The Mechanical Design Engineer will be responsible for carrying out the duties of the Engineering department, including design, prototyping, design proving, engineering documentation, and supporting calculations. A key requirement of this role is the ability to obtain and maintain a high‑level security clearance. If you do not currently hold the required clearance, we can support you through the application process. DV Clearance will be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately. This position will require an on-site presence in Ampthill, Bedfordshire. The role demands a high level of innovative thinking and the ability to synthesise ideas into functioning and manufacturable products that are compliant to design specifications and applicable legislation. Working within a team of engineers and Design Authorities to design and develop high integrity components, complex mechanisms and linkages that will function and be durable in challenging environments. • Use requirements specifications and a design brief to develop innovative yet robust design solutions that are compliant and fit for purpose., • Use CREO Parametric CAD to produce both concept and detail designs., • Produce supporting calculations and analysis to justify design decisions., • Work with SMEs, Users and Design Authorities to develop concept design solutions., • Work with a team of Design Engineers with agreed interfaces to develop a single sub-system design solution., • Work with CAD engineers to enable the production of drawings and design data pack., • Create and present Design Review data packs to Senior Engineers and Governors., • Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams., • Perform physical testing and design proving activities on engineering prototypes., • Ensure components and assemblies adhere to applicable, industry and business standards., • Ensure components and assemblies adhere to applicable programme safety requirements and governing safety legislation., • Must be able to work in the UK without restrictions in accordance with UK National Law and be prepared to successfully undertake an appropriate level of UK National Security Vetting according to UK Government National Security Vetting criteria: DV Clearance will be required for the role - applicants should either already hold a DV or being prepared to go through an application immediately., • Experience of working within the defence industry working within the Aeropace or Space domain considered a strong advantage for this role., • Proven, direct experience in the design and development of mechanical sub-systems and components., • Proven, direct experience in the design and specification of electrical interfaces for sub-systems and components., • Understanding of current materials, treatments and finishing technology for use in Defence, Aerospace and Space products., • Working knowledge of CREO CAD software and experience of using the tool to produce complex parametric designs., • Able to use Windchill PDM system., • Knowledge of complex mechanism design and principles., • Ability to perform basic structural and kinematic calculations., • Proven track record of successful design and product development for use in harsh environments., • Impeccable attention to design detail and able to produce high standards of documentation., • Ability to plan, schedule, coordinate and problem solve effectively both as an individual and as part of team solve effectively. At Lockheed Martin our employees come first and therefore your physical, mental and financial wellbeing matters to us. On top of working in a highly supportive, friendly, respectful environment you can expect so much more. We are an employer in support of and offering Flexible working with the option to also work a 4 day week depending on business requirements, where you have the option of Fridays off. Lockheed Martin (UK) Ampthill is a rapidly changing, dynamic part of the Lockheed Martin Corporation with both domestic and international customers. It consists of three business areas focusing on Vehicles, Special Projects and Mission Support, which provide a variety of products and services to the MoD and other customers including the Scout and support to the Land Environment Air Picture Provision capability. We are looking for talented individuals to join the company, in return, we can offer an exciting and challenging career path. Please note that Lockheed Martin Ampthill work an 8 day fortnight with the site closed every Friday. Lockheed Martin recognises and actively promotes the benefits of a diverse workforce and is committed to treating all employees with dignity and respect regardless of race, gender, disability, age, sexual orientation, religion or belief. Discrimination on any of these grounds is expressly forbidden. We therefore welcome applications from all sections of the community. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call . #J-18808-Ljbffr

Senior Design Product Engineer Location: Bedford, UK - Onsite working required Please note: Applicants must have the legal right to work in the UK Our client is a leading global semiconductor manufacturer is seeking a Senior Design Engineer to develop next-generation power semiconductor devices for overvoltage and overcurrent protection applications. This role involves the design and layout of semiconductor chips for both in-house wafer fabrication and external foundries. You will play a key role in new product development while also acting as a technical advisor on wafer processing and continuous improvement initiatives. • Collaborate with Product Management, Sales and Applications teams to define new products, • Design and develop silicon or SiC power semiconductor devices, • Apply semiconductor physics, DOE, wafer fabrication and electrical testing to prototype development, • Use Silvaco or similar CAD tools for simulation, design and layout, • Reverse engineer competitor products for benchmarking, • Support New Product Introduction (NPI) to ensure on-time production release, • Lead complex work including device modelling and technology qualification, • Produce full documentation, including datasheets, aligned to IATF16949 (or higher), • Develop and perform characterisation, reliability testing and failure analysis, • Apply SPC, DOE, DFM, FMEA and Six Sigma methodologies, • Support existing products and drive continuous improvement across design and process, • Diagnose and resolve product/process issues related to quality, cost and performance, • Provide technical training and cross-functional engineering support, • Strong background in semiconductor physics and wafer processing, • Proven experience designing power semiconductor devices (Silicon or SiC), • Knowledge of surge protection technologies and circuit protection components, • Understanding of application circuits requiring protection, • Experience in device characterisation, reliability and failure analysis, • Familiarity with industry standards for voltage and overcurrent protection, • Proficiency with Silvaco or equivalent tools, • Degree in Engineering/Physics (or equivalent experience), • Demonstrated ability to deliver complex products from concept to production, • Strong problem-solving, organisation and time management skills, • Able to work independently in a fast-paced environment, • Willingness to travel, • Ability to present complex technical information to global stakeholders, • Effective collaborator across engineering, manufacturing and commercial teams This is an opportunity to join an innovative organisation at the forefront of power semiconductor technology, working on advanced designs while influencing manufacturing processes and product strategy. #J-18808-Ljbffr

Job Title: Interim Site Engineering Manager Sector: FMCG Manufacturing - Chilled, Frozen Food Production & Cold Storage Location: Bedfordshire (Site Based) Contract: Interim Assignment, 3 Months Initially (Potential Extension) Rate: £500-£600 per day (PAYE/Umbrella) IR35 Status: Inside IR35 Lead the Team. Drive Engineering Excellence. Protect Critical Cold Chain Operations. We are seeking an experienced Interim Site Engineering Manager to lead the engineering function within a fast-paced chilled and frozen food manufacturing operation. This opportunity requires a hands-on engineering leader with proven experience of managing engineering teams in temperature-controlled manufacturing environments, including chilled processing, frozen production, cold storage facilities, refrigeration systems and critical site services. Working closely with the Site Leadership Team, you will take responsibility for engineering performance, asset reliability, maintenance strategy, refrigeration infrastructure, compliance and continuous improvement across the site. The successful candidate will bring strong leadership capability alongside practical experience of refrigeration plant, cold chain operations and engineering reliability within a food manufacturing environment. This role would suit an experienced: • Site Engineering Manager, • Head of Engineering, • Chief Engineer, • Senior Engineering Manager, • Maintenance Manager, • Interim Engineering Leader with a background in: • Chilled food manufacturing, • Frozen food manufacturing, • Cold storage operations, • Refrigerated warehousing, • Bakery, dairy, convenience food or FMCG environments You will lead the engineering strategy whilst supporting operational performance through improved asset reliability, refrigeration uptime, maintenance effectiveness and engineering team development. • Lead, coach and develop the engineering team., • Drive a proactive engineering and reliability culture., • Improve plant availability, OEE and maintenance performance., • Ensure refrigeration and cold storage assets operate safely and effectively., • Manage PPM, CBM and predictive maintenance programmes., • Support ammonia and industrial refrigeration compliance requirements., • Develop engineering KPIs and performance improvement plans., • Lead RCA and continuous improvement activities., • Manage engineering budgets and engineering resources., • Deliver CAPEX and infrastructure improvement projects., • Ensure compliance with all engineering, food safety, HSE and statutory requirements. Essential Experience Candidates must demonstrate experience within chilled, frozen or temperature-controlled manufacturing environments. Particular interest will be given to individuals with experience of: • Ammonia refrigeration systems, • CO₂ refrigeration systems, • Cold stores and refrigerated warehouses, • Blast freezers, • Spiral freezers, • Hardening tunnels, • Evaporators and condensers, • Defrost systems, • Refrigerated production environments, • Utilities and critical site services, • Food manufacturing engineering leadership, • Proven Engineering Management experience within FMCG manufacturing., • Strong chilled or frozen food manufacturing background., • Industrial refrigeration and cold chain engineering knowledge., • Experience leading multi-disciplined engineering teams., • Strong maintenance and reliability engineering expertise., • Experience of TPM, Lean Manufacturing, WCM or similar continuous improvement methodologies., • Demonstrable success improving OEE, asset reliability and engineering performance., • Excellent communication and stakeholder management skills., • HNC, HND or Degree qualified Engineer, ideally with a time-served apprenticeship background., • Immediate impact opportunity., • High-profile engineering leadership role., • Significant autonomy and influence., • Opportunity to improve engineering standards and refrigeration reliability., • Supportive senior leadership team., • Competitive day rate of £500-£600 per day., • Immediate start available., • This opportunity is particularly suited to engineering leaders with experience of chilled food, frozen food, bakery, cold storage, refrigeration plant, ammonia systems and temperature-controlled manufacturing operations. #J-18808-Ljbffr

Mane Contract Services is seeking a Senior Mechanical Design Engineer to join the Operations Engineering team in Ampthill. You will own tooling design across the product lifecycle, from prototype development through production and ongoing support. You will design tooling such as jigs, fixtures, gauges, dies, prototype models and machine attachments, working with cross-functional teams to improve quality, yield and cost. A proactive, problem-solving approach is essential. #J-18808-Ljbffr

Salary: Up to £70,000 Location: Ampthill Clearance: SC required to start Sector: Defence | Aerospace We are seeking an experienced Manufacturing Engineer - Machining Lead to lead CNC machining strategy and advanced tooling initiatives within the Operations Engineering department. You will drive machining efficiency, reduce cycle times and improve quality while supporting the manufacture of high-precision components Working closely with Engineering, Production and Quality teams, you will develop robust machining processes and own the machining technology roadmap, ensuring alignment with business requirements and emerging industry technologies. This is a technical leadership role requiring strong expertise in multi-axis CNC machining, programming, tooling and process optimisation. This position requires extensive expertise in multi-axis machining, CNC programming, CAD/CAM, CNC turning, advanced work holding solutions and manufacturing process optimisation, alongside the ability to lead engineers and technicians. • Lead CNC machining strategy and own the machining technology roadmap., • Develop, optimise and validate CNC programmes for 3-axis, 4-axis and 5-axis machining centres, including standard and mill-turn lathes., • Optimise tooling, cutting parameters, fixtures and workholding solutions., • Drive improvements in cycle times, tool life, productivity and machining quality., • Support NPI activities through Design for Manufacture (DFM)., • Troubleshoot complex machining issues and implement corrective actions., • Establish standardised machining processes and lead continuous improvement initiatives., • Support new machinery, tooling and automation technology implementation., • Maintain manufacturing documentation and ensure compliance with quality, health, safety and environmental standards., • Provide technical leadership to engineers and technicians., • A minimum of five years' experience within a CNC manufacturing or precision machining environment., • Demonstrable mastery of 3-axis, 4-axis and 5-axis CNC programming and machining processes., • Expert-level proficiency in hyperMILL CAM software., • Strong understanding of CNC machining strategies for complex geometries and tight-tolerance components., • In-depth knowledge of metallurgy, material machinability, cutting tool technology, feeds and speeds optimisation, and chip control., • Experience with CNC turning and mill-turn lathes., • Proven track record of improving machining efficiency, tool life and dimensional accuracy., • Experience in high-precision or low-volume, high-complexity manufacturing., • Knowledge of Lean Manufacturing, root cause analysis and continuous improvement., • Previous experience leading a team of engineers and technicians., • A degree, HNC/HND, apprenticeship or equivalent qualification in Manufacturing Engineering, Mechanical Engineering, Precision Engineering or a related discipline., • Experience within aerospace, defence, motorsport, semiconductors, energy or other high-precision industries., • Knowledge of automation, robotic tending, palletisation and lights-out machining strategies., • Familiarity with cutting tool management systems and digital manufacturing initiatives., • Exposure to additive manufacturing and hybrid manufacturing technologies., • Six Sigma Green Belt/Black Belt or Lean Manufacturing certification., • Experience with Statistical Process Control (SPC) and process capability analysis., • Experience machining exotic alloys and challenging materials, including titanium, Inconel, stainless steels and hardened materials #J-18808-Ljbffr

Verso Recruitment Group is seeking a lead hardware engineer to drive next-generation smart hardware at a design-led and fast-growing company in the UK. You will own digital, analogue, RF, and power electronics, and work closely with senior technical leaders. Responsibilities include schematic capture, PCB layout, prototyping, and ensuring EMC compliance. You will collaborate with production teams and create comprehensive documentation for internal and regulatory needs. #J-18808-Ljbffr

Lockheed Martin in Ampthill, Bedfordshire, is looking for a Senior Mechanical Design Engineer (Tooling). You will design, develop and implement tooling, dies, gauges, jigs, fixtures, and attachments for production and experimental use, using CREO and Windchill, and drive cost reduction and yield improvement across the lifecycle. The role requires strong CAD capabilities, experience with manufacturing processes, and close collaboration with Industrial and Production Engineering teams to support #J-18808-Ljbffr

An excellent opportunity has arisen for a Quality Engineer, based in Bedford, Bedfordshire, to work for a leading Manufacturer of electro-mechanical systems to a range of mission critical environments such as the defence & aerospace sectors. The Quality Engineer, Bedford, Bedfordshire, will be responsible for ensuring that products and processes are compliant with quality standards such as AS9100. They will specialise in the creation of FAIR reports along with the traceability of production documentation. The ideal candidate for the Quality Engineer, Bedford, Bedfordshire will have; Experience with AS9102-C FAIR report creation Previous experience working in a relatable manufacturing environment in the defence & aerospace industry, ideally within an electro-mechanical environment Experience with creating PPAP's and APQP reports The Quality Engineer, Bedford, Bedfordshire, will have; Proven experience in quality engineering, quality assurance / Strong understanding of quality management systems. Experience with Quality audits. APPLY NOW for the Quality Engineer, Bedford, Bedfordshire, by sending your CV to . Otherwise, we always welcome the opportunity to discuss other roles similar to Quality jobs on 01582 878 821 TPBN1_UKTJ