Offres production engineer à ExeterCréer des alertes d'emploi

Production Gauging Engineer\n \n The Opportunity:\n \n \n What a fabulous opportunity for an experienced Engineer with experience of Production Gauging. The Manufacturing Engineer / Production Engineer will provide technical expertise for manufacturing processes on this expansive, engineering site, focusing on measurement equipment for production gauging. The Manufacturing Engineer / Production Gauging Engin...\n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Gauging Engineer\n \n The Opportunity:\n \n \n What a fabulous opportunity for an experienced Engineer with experience of Gauging and Measurements or Calibration. The GaugeEngineer will provide technical expertise for manufacturing processes on this expansive, engineering site, focusing on measurement equipment for production gauging. The Manufacturing Engineer / Gauging Engineer will be to develop automated...\n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Junior Manufacturing Engineer (Sheet Metal / R&D) \n £38,000 - £40,000 + 24 days Holiday + Training & Development + Pension + Flexible Working Hours + Free Parking \n Exeter \n Are you a Mechanical Engineer with experience in manufacturing and Design for Manufacture, looking to play a key role in the development of innovative products from initial concept through to production? \n Do you enjoy working alongside design engineers, challenging designs, solving manufacturing problems and improving the way products are designed, assembled and manufactured? \n The company are a leading UK manufacturer of high-quality heating products, with a strong reputation for innovation, engineering excellence and product development. \n Based in Exeter, the business operates a significant Research & Development function focused on developing and improving its product range, combining detailed engineering design with advanced manufacturing processes. \n This is an excellent opportunity for a Mechanical Engineer to join the R&D team and take ownership of the manufacturability of new products, ensuring designs are technically robust, repeatable, cost-effective and suitable for efficient production. \n The Role: \n\n • Provide manufacturing and assembly guidance throughout the new product development process\n, • Review and challenge product designs to improve manufacturability, repeatability and cost-effectiveness\n, • Identify manufacturing, assembly, tooling and material challenges at the early stages of product development\n, • Assess component and assembly tolerances, fastening methods, material selection and access requirements\n, • Ensure designs are suitable for efficient and repeatable manufacture using the intended production processes\n, • Influence component geometry, tolerances and part standardisation to improve manufacturing efficiency\n\n The Person: \n\n • Degree or equivalent qualification in Mechanical Engineering or a related discipline\n, • Understanding of sheet metal manufacturing and fabrication processes\n\n Reference Number: BBBH27155 \n Keywords: Manufacturing Engineer, Design for Manufacture, DFM, Mechanical Engineer, Design Engineer, Production Engineer, Manufacturing Engineering, Product Development, New Product Development, NPD, Mechanical Design, Product Design, \n Lean Manufacturing, Quality Improvement, Tolerance Analysis, Engineering Tolerances, Materials Selection, Production Engineering, Mechanical Engineering, Manufacturing, Engineering, Exeter, Devon \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.

Maintenance Engineer (Mechanical, Electrical, or Multi-Skilled) 3 shift or 12 hr continental available Up to £57,500 per annum + Bonus + Enhanced Overtime + Full Sickness Pay + 10% employer Pension Location: Exeter \n Are you a skilled Maintenance Engineer looking for a role with top-tier pay, job security, and career progression at a well-invested site? \n This is a rare opportunity to join a world-class, globally recognised production site that is a leader in its field. Backed by a multi-billion-pound global turnover, this company is a powerhouse in advanced engineering and manufacturing, supplying critical components worldwide. \n With a long-standing history of success, they invest heavily in their maintenance team, reflected in high retention rates and career growth opportunities. Engineers benefit from funded qualifications for mechanical engineers looking to gain electrical NVQs and become multi-skilled, as well as options to pursue HNCs and further technical development. \n If you have experience in hydraulics, large-scale production machinery and are looking to join a supportive team that nurtures talent, this role could be the perfect fit for you. \n What You'll Be Doing \n * Carrying out planned preventative maintenance (PPM) on a range of heavy industrial machinery, ensuring high reliability and efficiency. \n * Responding to reactive maintenance needs when necessary, but working within a well structured maintenance culture that prioritises PPM schedules. \n * Working with cutting-edge equipment such as vacuum systems, hydraulic presses, CNC machines, X-ray machinery, kilns, furnaces, automated conveyors, and robotic systems. \n * Using your problem-solving skills to troubleshoot and optimise equipment performance. \n * Collaborating with a highly skilled engineering team in a facility known for first-class maintenance standards and an exemplary health & safety record. \n * Contributing to continuous improvement initiatives and safety enhancements. \n What's In It for You? \n * Job security & stability - work for a financially strong and well-established company. \n * Flexible shift patterns to suit work-life balance. \n * Uncapped overtime - huge earning potential. \n * Career progression & funded training, including conversion courses for mechanical engineers to gain electrical qualifications should they wish! \n * 10% employer pension contribution - significantly above industry standard. \n * 6x annual salary life assurance & full sick pay. \n * Health scheme & employee assistance programmes. \n * Attendance & company-wide performance bonuses. \n * Union support and a highly supportive work environment. \n * 25 days of annual leave + bank holidays and xmas shut down not deducted form a/l! \n What We're Looking For \n * Relevant level 3 qualifications \n * Experience in a heavy industry setting or strong aptitude and willingness to work with large hydraulic systems. \n * Physically fit and comfortable working in a hands-on environment. \n * Someone who can demonstrate a real passion for engineering - whether it's car restoration in your space time, or showing a real flare for problem-solving in an engineering setting. \n * A proactive mindset with logical fault-finding and problem-solving skills. \n * A willingness to learn and develop within a high-performing team. \n Are You Up for the Challenge? \n This is a unique chance to join an elite engineering team, working in an environment that values expertise and continuous improvement. Whether you're a Mechanical Fitter, Electrical Maintenance Engineer, or Multi-Skilled Engineer, if you have the skills and motivation, we want to hear from you! \n Apply now to find out more about this opportunity! \n Know someone who might be interested? We offer a generous referral scheme! \n

Mechanical Design Engineer \n Office Based, Exeter - commutable from Sidmouth, Exmouth, Torquay, Tiverton and surrounding areas. \n £36,500-£40,000 + Office Based, Monday to Friday + Hybrid (1 day a week from home) + Holiday + Pension + Company Benefits + Early Finish on Fridays \n Are you a Mechanical Design Engineer looking to build deep technical expertise in product development? Do you have experience taking products from concept through to production-ready design, with Solid Edge or SolidWorks? \n This is a secure, permanent position where you'll be trusted to own engineering design work end-to-end, while being properly supported by an established technical team and strong company benefits package. \n You'll be joining a design and manufacturing business supplying products internationally, with a strong focus on quality standards and design-for-manufacture-ideal if you enjoy doing things properly and seeing your designs make it to production. \n Working within the existing design team, you'll produce detailed engineering drawings for manufacture, support new product development, and collaborate closely with Development, Production Engineering and Purchasing to ensure smooth product handover. \n This role suits a Mechanical Design Engineer motivated by technical progression and becoming a recognised specialist, with structured engineering work across NPD and manufacturable design rather than a "same drawings every day" routine. \n The Role: \n *Mechanical Design Engineer, Manufacturing Engineer/ Production Engineer / Development Engineer \n *Developing new and existing products \n *Concept to Completion \n *Working within Engineering team \n *Working with a team to resolve process issues and identify areas for improvement \n The Person: \n *Mechanical Design Engineer, Manufacturing Engineer/ Production Engineer / Development Engineer or similar backgrounds all considered \n *Experience working in a Manufacturing environment - sheet metal experience would be advantageous \n *Knowledge and experience using Solid Edge / Solid Works \n *Extensive knowledge of mechanical principals (qualifications ideally) \n Reference Number: BBBH279244 \n To apply for this role or for to be considered for further roles, please click "Apply Now" or contact Nick Phillips at Rise Technical. \n This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. \n Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed \n Rise Technical Recruitment Limited is acting as an Employment Agency in relation to this vacancy.

Junior Mechanical Design Engineer (Sheet Metal / Solid Edge) \n £38,000 - £40,000 + 24 days holiday + Training & Development + Pension + Flexible Working Hours + Free Parking \n Exeter \n Are you a Mechanical Design Engineer looking to take the next step in your career with a new and exciting challenge with a well-established company? \n Do you have experience of working with new product design and development and want to work for an established and growing manufacturer that values its employees with a proven track record of developing and promoting new staff who are investing in Continuous improvement and driving innovation? \n On offer is a role reporting to the Technical Engineering Manager. You will be responsible for the design, engineering and specification of all new products alongside the maintenance of the existing product range, and any modifications, that may become necessary. \n Reporting to the Technical Engineering Manager and alongside the Design team, you will be expected to generate production ready designs and help ensure the smooth running of the department, ensuring new products are concluded with the agreed timescales and to the standards expected. \n The role: \n\n • Work closely with the Technical Engineering Manager, design and development department taking products from conception to detailed engineering drawings for manufacture\n, • Determine manufacturing methods for engineering designs\n, • Carry out DFMEA at the outset of each project\n, • Ensure that tolerance analysis is carried out during the design process\n, • Work with all departments involved in the NPD program, in particular, Development, Production Engineering & Purchasing, ensuring design for manufacture is implemented prior to product handover\n\n The person: \n\n • Either degree educated or a proven engineering background with a strong bias to mechanical engineering\n, • Sheet metal manufacture experience and knowledge of sheet metal processes\n\n Reference Number: BBBH27153 \n Keywords: Mechanical Design Engineer, DFMEA, Solid Works, Solid Edge, Sheet Metal, Exeter \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.

Product EngineerExeter, Devon \n Salary: £35,000 - £50,000 DOE + Benefits \n Butler Rose is delighted to be recruiting for a Product Engineer on behalf of a well-established and highly successful manufacturing organisation based in Exeter. This is an excellent opportunity for an experienced engineering professional to join a forward-thinking business, supporting the development and continuous improvement of manufacturing processes within a technically advanced production environment. \n The Role \n Reporting to the Product Engineering Team Leader, you will play a key role in developing, implementing and maintaining best practice across product engineering activities. You will work closely with production, quality and customer-facing teams to ensure products are manufactured efficiently, meet customer requirements and achieve the highest quality standards. \n Key Responsibilities \n\n • Develop and maintain robust manufacturing processes and engineering standards.\n, • Provide technical support to production teams to ensure consistent delivery of high-quality products.\n, • Manage engineering projects and product-related programmes from concept through to implementation.\n, • Utilise CAD, CNC and 3D modelling tools to support manufacturing activities.\n, • Apply Six Sigma and Lean methodologies to identify and resolve manufacturing issues.\n, • Drive continuous improvement initiatives focused on reducing scrap, rework and process variation.\n, • Analyse manufacturing data and prepare qualification, scrap and rework reports.\n, • Implement process controls and dimensional improvements to enhance product quality.\n, • Identify opportunities to reduce costs through process optimisation and waste reduction.\n, • Present technical information and project updates to a range of stakeholders.\n, • Promote and maintain a safe working environment in line with company standards.\n\n About You \n To be successful in this role, you will have: \n\n • A Degree, HNC or equivalent qualification in an Engineering discipline.\n, • Knowledge of Six Sigma, Lean Manufacturing and continuous improvement methodologies.\n, • Experience using CAD software and/or tooling design principles.\n, • Strong IT skills, including Microsoft Office and MRP systems.\n, • Excellent communication and relationship-building skills.\n, • Strong organisational and project management capabilities.\n, • A methodical approach with excellent attention to detail.\n, • Confidence presenting technical information to both technical and non-technical audiences.\n\n Desirable Experience \n\n • Injection moulding, ceramics processing or related manufacturing technologies.\n, • Experience supporting complex production environments and process development activities.\n\n What's on Offer \n\n • Salary bracket £35,000 - £50,000 DOE\n, • Enhanced pension and leave entitlement\n, • Healthcare\n, • Bonus\n, • Opportunity to join an innovative and growing engineering business.\n, • Varied and technically challenging role with genuine career development opportunities.\n\n If you're an experienced Product Engineer looking for your next challenge in the Exeter area, we'd be keen to hear from you. Please apply today or contact Butler Rose for a confidential discussion. \n #IND-HL-25 \n \n Butler Rose is committed to equality in the workplace and is an equal opportunity employer.Butler Rose Ltd is acting as an Employment Business in relation to this vacancy. \n

About Lightfoot \n Lightfoot builds connected-vehicle technology - in-cab driver coaching, vehicle safety products and fleet telematics. Our software supports real hardware in real vehicles, with customers including Tesco, Asda, Ocado, Virgin Media and Iceland. \n We’re big enough to have established products and engineering teams, but small enough that strong technical decisions can still change the direction of the company. \n We’re rebuilding the software Lightfoot runs on - the customer portal, the APIs behind it and the mobile app - in Python, React and React Native on AWS. We’re also changing how we build software: stronger architecture, better automated testing, secure-by-default delivery and agentic development used properly on production systems. We’re looking for the technical leader who will shape that transition and lead the team building it. \n Type: Permanent, full-time, Monday to Friday. \n Location: Remote. We’d want you to attend our Office in Exeter, Devon roughly every two or three weeks, usually with an overnight, for the things that are genuinely better done together - architecture sessions, kicking off important work, retrospectives and time with the team. Not for the sake of being seen. \n About the role \n This is first and foremost a technical leadership role. You’ll lead the Applications engineering function, but we’re not looking for a manager who has stepped away from engineering. We want someone who can set technical direction, make architectural decisions, raise the engineering bar across the team and stay close enough to the detail to know whether those decisions are working. \n You’ll be responsible for \n\n • Leading the architecture of our next-generation platform across backend, web and mobile.\n, • Shaping the migration from our existing PHP/MySQL estate without pretending we can replace everything at once.\n, • Defining engineering standards and patterns for the new platform.\n, • Owning the testing strategy — what we test, where we automate and how quality is built into delivery.\n, • Leading our move to agentic software development, turning a proven individual approach into a repeatable team capability.\n, • Building security and observability into the platform from the start.\n, • Developing the technical capability of the team through design reviews, mentoring and hands-on leadership.\n, • You’ll also line-manage the team and remain accountable for delivery. Those things matter, but the reason we’re hiring you is your technical judgement.\n\n What’s already decided, and what’s yours The broad technology direction is agreed: \n\n • Python / FastAPI for new backend services.\n, • React / TypeScript for web.\n, • React Native for mobile.\n, • AWS as the platform.\n, • Managed and serverless services where they make sense.\n, • Agentic development as a normal part of engineering.\n\n You won’t be asked to spend six months choosing a stack. \n The interesting decisions are the ones underneath it: service boundaries, API design, migration sequencing, testing strategy, engineering standards, secure-development practices, observability and how agentic development works across a team. \n One important constraint: our database is shared across several engineering teams and is mission-critical beyond Applications. Significant schema change is negotiated, not decided unilaterally. That’s a real architectural constraint, and we’d rather tell you about it now. \n Staying hands-on \n This isn’t a role where success is measured by how many sprint tickets you close. \n It is a role where you’ll be expected to stay technically credible: reviewing designs, challenging assumptions, prototyping important patterns, getting into difficult implementations and helping the team solve hard problems. \n You’ll lead engineers primarily through strong technical judgement, not through distance from the code. \n What we’re looking for \n You do not need to be the strongest engineer in every technology above. \n You do need to be a strong technical leader. \n We’re looking for someone who \n\n • Has led engineers technically, not just managed them.\n, • Has designed and evolved substantial production systems.\n, • Can make architectural decisions and explain the trade-offs behind them.\n, • Has strong backend engineering depth, ideally in Python.\n, • Has worked with AWS and Docker in production.\n, • Has modernised or re-platformed a live system that people depended on.\n, • Understands automated testing deeply enough to define a strategy, not simply mandate more tests.\n, • Treats security as an engineering responsibility.\n, • Can get into an unfamiliar or long-lived codebase and work out what it really does.\n, • Can communicate technical trade-offs clearly to engineers and non-technical stakeholders.\n, • Stays calm when systems, customers or priorities get noisy.\n\n\n, • Being able to navigate PHP and older JavaScript is useful because that’s the estate we’re migrating from. You don’t need to love it.\n, • For the right person, technical strength matters more to us than arriving as the finished engineering manager.\n\n Why this is a good job \n\n • You get to shape the next platform, not just maintain the current one. The technology direction is agreed, and the transformation is already underway.\n, • The architecture isn’t finished. There are real decisions to make about how the next generation of Lightfoot should be built.\n, • Agentic engineering is real here. We’re already using it successfully on production engineering work. You’ll help turn that from something one strong engineer can do into a capability the whole team can use well.\n, • The work is tangible. Our software connects to devices fitted to real vehicles. You’ll see vehicles using systems your team built - delivering groceries, installing broadband and operating some of the UK’s largest fleets.\n, • Technology you can explain at a barbecue: vehicles, drivers, safety, and data at scale. You will literally see your technology in the windscreen of vehicles driving around town, delivering your groceries or installing your broadband.\n\n REF-230597

Role: Project Engineer (Mechanical or Electrical) Shift: Monday to Friday, Days Salary: £55,000 - £57,500 + Bonus + Private Healthcare + Life Assurance (6x salary) + Comprehensive Sick Pay Location: Exeter Are you a Project Engineer or an experienced Maintenance Engineer looking to move into projects? Whether your background is electrical or mechanical, this is an opportunity to join a world-class manufacturer investing heavily in its people, facilities and engineering infrastructure. Backed by a multi-billion-pound global organisation, you'll play a key role in delivering capital projects, improving manufacturing performance and supporting the continued development of a highly automated production site. What You'll Be Doing Leading capital projects involving new machinery, production equipment and site infrastructure. Managing equipment installations, upgrades and site improvement projects from concept through to completion. Specifying and sourcing machinery, equipment and engineering components. Managing contractors and ensuring projects are delivered safely, on time and within budget. Developing project plans, equipment layouts and manufacturing improvement initiatives. Supporting reliability improvements by identifying long-term engineering solutions to recurring equipment issues. Providing technical support during installation, commissioning and project handover. Maintaining technical documentation and en...

We are partnered with a specialist electronics manufacturer based near Exeter, Devon, looking for an Electronics Test Engineer to join their production team. This is a hands-on role focused on testing, fault finding and repairing complex electronic products, working alongside an experienced team of engineers. In this Electronics Test Engineer role near Exeter, Devon, you will: xrnqpay • Test and fault-find ele Check below to see if you have what is needed for this opportunity, and if so, make an application asap. Please click on the apply button to read the full job description

Job Description: AI Architect Location: London (Hybrid) Contract Duration: 6 Months Daily Rate: £680 per day Clearance: Active SC Clearance Required Role Overview We are seeking aAI Architect to lead the design, governance, and delivery of enterprise-grade AI solutions built on frontier foundation models. This is a high-impact, hybrid technical-leadership contract position. You will architect solutions that push what frontier models including LLMs, multi-modal systems, and agentic architectures can responsibly achieve within complex, highly regulated environments. You will lead a team of architects and engineers while serving as a trusted technical advisor to client CxOs. Key Responsibilities • Architecture and Solution Design: Architect enterprise AI solutions using frontier models (Claude, GPT, Gemini family) across agentic automation, RAG, copilots, and multi-modal applications., • Pre-Sales and Discovery: Lead technical solutioning during pre-sales and discovery, translating client business challenges into scalable AI architectures and delivery roadmaps., • Platform Governance: Design and govern AI platform architecturescovering model orchestration, prompt/context management, retrieval pipelines, vector stores, and tool integration (including emerging protocols like MCP)., • Responsible AI Frameworks: Define and enforce AI governance, risk, and safety frameworks (covering bias, data privacy, and model risk) aligned with regulatory requirements., • Team Leadership and Delivery: Mentoring and leading a team of AI engineers and architects, driving end-to-end delivery quality, technical governance boards, and production readiness., • Ecosystem Partnerships: Own technical relationships across major cloud AI ecosystems (Azure OpenAI, AWS Bedrock, Google Vertex AI, Anthropic, OpenAI)., • Reusable Assets: Drive the creation of reusable accelerators, frameworks, and IP across client engagements. Required Skills and Experience • Clearance: Active UK SC Clearance is essential., • Experience: 10+ years in software, data engineering, or solution architecture, with at least 3-5 years focused specifically on applied AI/ML or Generative AI., • Hands-on GenAI Depth: Proven experience architecting solutions with frontier modelsincluding prompt engineering, fine-tuning, RAG, and agentic/multi-agent system design., • LLMOps / MLOps Grounding: Expertise in evaluation frameworks, observability, cost and latency optimization, guardrails, and safe deployment at scale., • Cloud and Model Ecosystems: Direct experience with major model providers (Anthropic, OpenAI, Google) and hyperscaler AI stacks (AWS Bedrock, Azure AI/OpenAI, Google Vertex AI)., • AI Governance: Deep knowledge of Responsible AI, risk management, and regulatory frameworks (e.g., EU AI Act, NIST AI RMF)., • Consulting Leadership: Proven experience in client-facing consulting, pre-sales technical leadership, and managing CxO-level stakeholders., • Engineering Fundamentals: Strong software engineering background (API design, microservices, cloud-native architecture, data pipelines). Preferred / Desirable Skills • Experience with agent orchestration frameworks (e.g., LangGraph, AutoGen, CrewAI) and emerging tool protocols (e.g., Model Context Protocol / MCP)., • Relevant certifications (e.g., Azure AI Engineer, AWS ML Specialty, Google Professional ML Engineer). £650.00 - £680.00 / day Talent International UK and it's subsidiaries, Digital Gurus, Infinite Talent and Rethink act as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this opportunity, you accept the TandC's, Privacy Policy and Disclaimers which can be JBRP1_UKTJ

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. The Role We are looking for Lift Service Engineer to join our Service team Devonand surrounding areas. If you have a comprehensive Lift engineering background, including an NVQ 3 in Lift Engineering or equivalent we want to hear from you! Key Responsibilities • Carrying out regular planned preventative maintenance and service visits, • Meeting agreed customer response times, building relationships with our clients, • Providing regular updates to the Service Supervisor/ Service Manager, • Problem solving and working on your own initiative What Were Looking For • NVQ 3 in Lift Engineering, • Experience of working with Lifts, • Strong customer skills, • A clean UK Driving License, • Flexible Hours If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you. Why Join ORONA? We offer more than just a job we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary: Competitive pay that reflects your skills and experience Generous Holiday Allowance: Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future: Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind: Life Inssurance to support you and your loved ones Health & Wellbeing: Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits: Enhanced leave for family-related events and emergencies Support When You Need It: Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care: Eyecare vouchers to help keep your vision sharp Recognition for Longevity: Long Service Awards to celebrate your milestones with us Referral Rewards: Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth: Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day. Requirements • Must be eligible to work in the UK, • Must have a clean UK driving License, • Pass a DBS check, • NVQ 3 in Lift Engineering JBRP1_UKTJ

Role: Project Engineer (Mechanical or Electrical) Shift: Monday to Friday, Days Salary: £55,000 - £57,500 + Bonus + Private Healthcare + Life Assurance (6x salary) + Comprehensive Sick Pay Location: Exeter Are you a Project Engineer or an experienced Maintenance Engineer looking to move into projects? Whether your background is electrical or mechanical, this is an opportunity to join a world-class manufacturer investing heavily in its people, facilities and engineering infrastructure. Backed by a multi-billion-pound global organisation, you'll play a key role in delivering capital projects, improving manufacturing performance and supporting the continued development of a highly automated production site. What You'll Be Doing Leading capital projects involving new machinery, production equipment and site infrastructure. Managing equipment installations, upgrades and site improvement projects from concept through to completion. Specifying and sourcing machinery, equipment and engineering components. Managing contractors and ensuring projects are delivered safely, on time and within budget. Developing project plans, equipment layouts and manufacturing improvement initiatives. Supporting reliability improvements by identifying long-term engineering solutions to recurring equipment issues. Providing technical support during installation, commissioning and project handover. Maintaining technical documentation and ensuring compliance with engineering and safety standards. What's In It For You? Monday to Friday days with an excellent work-life balance. 25 days annual leave plus bank holidays, plus a 3-day Christmas shutdown. Annual bonus. Annual salary reviews. 10% employer pension contribution. Private healthcare. Life assurance (6x salary). Comprehensive sick pay (6 months full pay followed by 6 months half pay). Long-term job security with a globally recognised manufacturer. Significant ongoing investment in engineering and manufacturing. Training, development and genuine career progression. What We're Looking For Level 3 or above in Mechanical, Electrical or Manufacturing Engineering, or relevant industry experience. Experience delivering engineering projects within a manufacturing, production or heavy industrial environment. Knowledge of equipment installation, plant upgrades or continuous improvement projects. Understanding of manufacturing performance and reliability improvement. CAD experience and knowledge of CMMS, Oracle or automation systems would be advantageous. A practical engineering background with good knowledge of manufacturing equipment. Strong communication and organisational skills with the ability to work across multiple departments. Ready for Your Next Challenge? This is a fantastic opportunity to join a business that continues to invest heavily in its engineering function. Whether you're already working in projects or you're a hands-on Maintenance Engineer looking to move into a project-focused role, we'd love to hear from you. Apply now to discuss the opportunity in confidence with our specialist engineering recruiter, Liam Reid. Know someone who could be interested? Ask us about our referral scheme. TPBN1_UKTJ

Electrical Mechanical Technician Cullompton, Devon Monday to Friday, Days (Flexible Hours) Circa £42,000 No nights | Work-life balance | Genuine autonomy We're working with a long-established manufacturing business near Tiverton operating within a continuous process environment. This is a smaller, close-knit site with a strong team culture, offering a more relaxed and flexible working environment than many larger FMCG operations. Due to continued investment, the business is looking to recruit either an Electrical Mechanical Technician. Salary and responsibilities will reflect the level of experience, making this an excellent opportunity whether you're an experienced engineer looking for a stable days role or an established supervisor seeking a position with greater work-life balance. This is a Monday to Friday days role with flexibility around start and finish times, allowing for a healthy work-life balance. Key responsibilities include: • Reactive and planned preventative maintenance across site., • Fault finding on electrical systems and production equipment., • Supporting installations, projects and plant improvements., • Coordinating contractors and overseeing work carried out on site., • Assisting with maintenance planning and reliability improvements. Machinery & Environment • Continuous process machinery including paper machines, rollers and conveyors., • Three-phase systems, motors, drives, panels and control systems., • PLC-controlled equipment (fault-finding level)., • A mixture of legacy and newer plant., • General site services and infrastructure. What They're Looking For • Electrical Mechanical maintenance background., • Experience within manufacturing, process or industrial environments., • Confident fault finding on three-phase systems, motors, drives and panels., • Able to work independently and support continuous improvement activities. What's on Offer • salary circa £42,000., • Monday to Friday days (no shift) role with flexible hours., • No nights., • 1 in 4 call-out rota, although call-outs are rare and typically resolved over the phone., • Stable, long-established business with a supportive culture., • Genuine opportunity to influence engineering standards and the future direction of the department. If you're an experienced Electrical Engineer looking to move away from shifts and seeking a more balanced role, this is an opportunity to join a well-established business where you'll have the autonomy to make a real difference. For further information or a confidential discussion, please get in touch. JBRP1_UKTJ

digiLab in the United Kingdom is seeking a Senior Software Engineer (Machine Learning) to advance the Uncertainty Engine, collaborating across product, ML research, and cloud-backed services. You will own backend APIs, integrate ML libraries, and drive software quality from design to production, using Python, FastAPI, Docker, and DevOps practices. The role is on-site at Exeter or Bristol, offering an engaging, fast-paced environment with strong emphasis on collaboration and high performance. #J-18808-Ljbffr

Junior Mechanical Design Engineer (Sheet Metal / Solid Edge) £38,000 - £40,000 + 24 days holiday + Training & Development + Pension + Flexible Working Hours + Free Parking Exeter Are you a Mechanical Design Engineer looking to take the next step in your career with a new and exciting challenge with a well-established company? Do you have experience of working with new product design and development and want to work for an established and growing manufacturer that values its employees with a proven track record of developing and promoting new staff who are investing in Continuous improvement and driving innovation? On offer is a role reporting to the Technical Engineering Manager. You will be responsible for the design, engineering and specification of all new products alongside the maintenance of the existing product range, and any modifications, that may become necessary. Reporting to the Technical Engineering Manager and alongside the Design team, you will be expected to generate production ready designs and help ensure the smooth running of the department, ensuring new products are concluded with the agreed timescales and to the standards expected. The role: • Work closely with the Technical Engineering Manager, design and development department taking products from conception to detailed engineering...

About The Role Engineered to Protect, thats our promise, we protect what matters - our nations, our waters, our land, our cities, our people, our environment, our world.You will take responsibility for the design, development and support of our products. You will be required to progress the design, development, design proving, test, commissioning and in-service support of the equipment. Senior Systems Engineer will be based at our Barnstaple site. This role allows for flexible working. The salary for this role is up to £65k, depending on experience. Whatyoullbedoing • Defining and Managing Requirements throughout the Engineering Lifecycle, • Proving Technical inputs to bidding activities, • Integration and production qualification activities, • Product Trialing and Testing Activities, • Work Package generation and executionAbout our company At SEA, we develop and deliver advanced solutions to make our world safer, cleaner and more efficient. We provide state-of-the-art applications for naval ship and fleet protection, and undersea surveillance systems. In-service across the globe, our systems deliver a rapid response to threats and system effectiveness and interoperation. Our systems support an ever-growing number of navies across the world, and we continue to bolster our already specialist, on-the-ground knowledge of key overseas markets. What we offer At our core, we encourage innovation, flexibility and out-of-the-box thinking to solve problems, so were always looking for talented, flexible, and creative people to bring their best to SEA. In return we offer generous rewards, a fantastic work/life balance, and excellent career and training opportunities for everyone who joins. Havea look atthe benefits we offer: Work life balance • Hybrid/flexible working arrangements, • 25 days annual leave, plus buy and sell, • Up to 16 days flexi leave accrual, • Half day Fridays, • Reservists in theArmedForces receive special paid leaveFamily & wellbeing, • Private medical health insurance & Employee Assistance Program, • Health Cash Plan, • All Staff Bonus, • Group Pension Plan of up to 8% employer contribution, • Cycle to work scheme, • Wellbeing Centre, • Sports & Social activities, • Employee Discounts portal - online and in-store discounts, travel savings, • Life assurance policy, • Publication and recruitment bonus rewards, • Development opportunities, including LinkedIn learningFacilities & resources, • Electric vehicle charging points at all sites, • Private seated lunch areas, • Onsite bistro (Barnstaple office) and free hot and cold beverages, • Onsite showers and toiletries provision, • Free onsite parkingTheskills you need, • Degree, HND or equivalent in a relevant engineering discipline, • Extensive Knowledge and experience of working within the Engineering Lifecycle as a Systems Engineer, • A good understanding of requirements capture and experience of using a requirements management tool to manage requirements, • Excellent Communication skills, • Knowledge and understanding of using MBSE, • Leadership and team leading, • Experience of Sonar or the Underwater Battlespace environmentJoin us and be part of something smaller - with500people in the UK and Canada - doing something bigger:protecting what matters. If youd like to know more, please give Kelly Thomas from our Talent Acquisition Team a call on 03330 414300. Or reach out to us on JBRP1_UKTJ

ToolingEngineer The Opportunity: An exciting opportunity within a leading Exeter based Engineering firm for an experienced Tooling EngineerorToolmaker. You will not be produding designs yourself, but it is essential that you can read CAD drawings to assist in the production ofToolingsolutionsfor the customers.Ideally HNC or Graduate level, or possibly having completed an apprenticeship, you will have a good appreciation of toolmaking with a practical application. The role is a mix of office and shop floor and good analytical and database skills are also required. The Role: • You will receive existing CAD drawings from your customer base and use your Tooling experience to engineer models for testing., • Ensure the product and process area is always evolving in a state of continuous improvement, to allow our product to meet the challenges of the customers advanced designs and market differentiation., • Apply your comprehensive understanding of production planning, control and basic manufacturing systems in order to reduce product related scrap and rework through root cause analysis., • Troubleshooting manufacturing problems and undertaking root cause analysis with a good understanding of CNC machining, CAD and/or 3D modelling essential.Preferred Skills:, • Previous experience as a Tooling Engineer, Toolmaker or similar absolutely essential., • Tooling design and/or CAD experience useful., • Proficiency in using CAE tools for CNC machining, CAD, and 3D modelling., • Degree/HNC or equivalent in Engineering discipline plus 4 years applicable engineering experience.Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy. Please note that this specific role may be subject to export control restrictions, including under ITAR. Any offer of employment from this particular company will be conditional on the successful candidate meeting the applicable legal requirements for access to controlled information or technology. JBRP1_UKTJ

Mechanical Design Engineer TheOpportunity: Working within the existing design team of this quality British designed and manufactured product, the Mechanical Design Engineer will be responsible for the adaption of existing designs on a really broad product range which is manufactured on site. In addition to your responsibilities as a Mechanical Design Engineer , you will work closely with the wider R&D team making recommendations for process improvements. The Role: Product design and development Accountable for design updates of existing products from initial concept through to manufacture, ensuring designs meet customer, technical, functional, quality and cost requirements Design for manufacture Ensure products are designed for efficient, repeatable and cost effective manufacture and assembly Cross-functional collaboration Work closely with new product development teams, Production Engineering, Quality, Purchasing and Marketing to ensure successful product design implementation Project support and delivery Accountable for being the technical support for R&D initiative projects, ensuring that project deadlines are met, relevant stakeholders are involved and project progress is reported Design risk management Identify, assess and mitigate design risks throughout existing product design updates Engineering standards Ensure designs comply with engineering standards, legislation and company procedures, liaising with the new product development stakeholders Continuous improvement Provide design support for manufacturing departments within the business for optimisation, continuous improvement and cost reduction projects Preferred Skills: 5 years experience in a sheet metal or manufacturing business as a Design Engineer Degree or HND in Mechanical Design or a related Engineering discipline A strong understanding of sheet metal manufacturing processes, materials and tolerances would be highly beneficial as some of the role will also involve process improvement. Proven experience of working with 3D CAD packages and generating 2D technical drawings (ideally a knowledge of SolidEdge). Associated Benefits: A competitive salary of £40000 dependent on experience Company Pension Scheme,5% contributory Salary Sacrificescheme. Working Hours: 8.00-4.30 Monday to Friday Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy. TPBN1_UKTJ

MAINTENANCE ENGINEER Job Title: Multi-Skilled Maintenance Engineer Location: Exeter, Devon Salary: £42,500 plus Benefits Shift: Days, Monday – Friday, 3 Week Rotating (6am – 2pm, 8am – 4pm and 10am – 6pm) Job Role of the Maintenance Engineer A fantastic opportunity which is not to be missed by strong Maintenance Engineer has come to the forefront. This is a excellent opportunity to join a business that is a market leader in their industry and constantly strving to improve. They have recently invested into the site and it's a great place to work for any maintenance engineer who wants to develop their career both technically and/or into management. You will be responsible for carrying out maintenance, fault-finding, and planned preventative maintenance on a range of fully automated production machinery, ensuring maximum uptime and efficiency. Sector – Factory Maintenance Non-Negotiable Requirements of the Maintenance Engineer Ideally an Electrical Biased maintenance Engineer within an industrial manufacturing environment. Hands on experience with pre-planned, reactive and breakdown maintenance in a factory. Requirements for the Maintenance Engineer Hands-on electrical experience working to 3-Phase electrics as well as experience working on conveyors, hydraulics and pneumatics as well as pumps, belts, bearings and chains. Recognised electrical engineering qualification. Mechanical engineering skills. Experience working within a manufacturing environment. Desirable Requirements for the Maintenance Engineer Experience working as a Maintenance Engineer in the UK. The Maintenance Engineer will benefit from: Working for a market-leading manufacturing business. Company benefits package including pension, life insurance, and gym access. Training and development opportunities. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Andrew McFarlane at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. TPBN1_UKTJ

Associate/Principal/Senior Structural Engineer - Heavy Civil Engineering (Nuclear & Defence) Location: Remote with occasional travel to Plymouth for workshops and meetings Project: Major Heavy Civil Engineering - Nuclear & Defence Infrastructure We are seeking an experienced Structural Engineer to join a major infrastructure programme supporting the upgrade of an existing dry dock at a high-profile nuclear and defence site in Plymouth. This is an excellent opportunity to play a key role in the delivery of a complex heavy civil engineering project. We are looking for a technically strong engineer who enjoys carrying out the engineering work rather than focusing primarily on project management or team supervision. Key Responsibilities • Produce and independently check structural calculations for heavy civil engineering works., • Work collaboratively with the BIM team to develop,review and coordinate engineering drawings and models., • Review reinforced concrete (RC) intent and modelling,applying a strong understanding of reinforcement detailing., • Interrogate and review BIM models using software such as Navisworks and Solibri., • Prepare high-quality technical documentation,including Technical Notes,Specifications and supporting engineering reports., • Develop and deliver technical presentations to support engineering workshops and design reviews., • Contribute to the production of works information and design deliverables throughout the project lifecycle., • Ensure engineering outputs meet the required technical,quality and safety standards. Essential Requirements • Degree in Civil Engineering,Structural Engineering or a related discipline., • Chartered Engineer (MICE or MIStructE)., • Experience operating at Principal Engineer or Associate level., • Approximately 5-10+ years experience in structural or heavy civil engineering design., • Proven experience producing structural calculations and technical engineering documentation., • Strong understanding of reinforced concrete design and detailing., • Experience working within a BIM environment,including Navisworks and/or Solibri., • Excellent written and spoken English., • Ability to work independently while collaborating effectively within a multidisciplinary design team. If you are an experienced structural engineer looking to contribute your technical expertise to one of the UKs major nuclear and defence infrastructure programmes,we would be like to hear from you. JBRP1_UKTJ

An experienced Quality Engineer who has strong experience within Quality tools like 8D, investigations, FMEAs PPAP and SPC is required for a large and reputable Manufacturing business based in Plymouth. Our client is able to offer a long term and progressive career within a Multi-National organisation. Main Duties: To actively support the implementation, maintenance, performance and improvements of the quality management system by applying appropriate quality tools and techniques. To provide training and support and to overcome barriers to quality improvement. To work independently and as a team in conducting quality engineering activities. To identify performance trends and potential and actual non-compliance in products and processes through data gathering, analysis, monitoring and auditing. To work in line with Quality, Safety & environmental policies, procedures and work instructions. Conduct root cause analysis and implement corrective ad preventative actions. Decision making, Able to stop production, drive containment actions and take corrective or preventative measures, to ensure effective and timely defect management. Carry out audits, inspections, measurements and test in a timely and effective manner. Propose and implement robust and cost-effective solutions and improvements within Quality. Evaluate and recommend new technologies and tools within quality engineering. Develop relationships within all departments, suppliers and customers. Control process control. Customer performance monitoring and reporting. Process data, trends and issues. APQP Support with NPI Projects. Customer PAPP. Gather information and report giving feedback. Document control. Internal process and system audits. Education: Minimum of BTEC Ideally a HNC in Engineering/Science Experience of Quality Tools (8D, FMEAs, PPAP and SPC) Computer Literate & Excellent communication skills Ideally Lean trained Experience within a Precision Engineering environment Minium of ISO9001 Ideally 14001 & 45001 Audit experience Ideally have working Lean knowledge within Six Sigma. JBRP1_UKTJ

KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and is seeking a CAD Engineer. The successful candidate will be self-motivated and possess a couple of years experience in design. Be competent in auto CAD/CIV3D and have a working knowledge in Revit. Have experience in rebar design and detailing with an eye for detail, able to check and validate drawings/models to and from the client while acting as a support function between site and Document Control. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role. Your team • Location: Devonport Dockyard, Plymouth, • Contract: Permanent, 42.5 hours a weekMaking Possible In this role, you will be working in a live MOD facility. Your day-to-day will include: • Act as a subject matter expert for the production of drawings and provide technical support to personnel as and when required., • Ensure that all drawing work is carried out in compliance with ISO 19650, BAM and CAD standards., • Provide Drawing production training, both to the team members and to the supply chain., • Provide support to the Document Control team to review Drawings before submitting to the client., • Understand the hardware and software requirements on the project and communicate with the BIM Lead and Project information Manager., • Represent the company where necessary at internal and external meetings., • Maintain high safety and environmental standards in accordance with company policies and report any inadequaciesWhat do you bring to the role?, • Degree in related discipline (Civil Engineering, Architecture, etc.) is preferred., • Able to collaborate and work effectively within a multidisciplinary and diverse team, with strong communication and interpersonal skills., • Experienced in rebar design and checking., • Have good understanding of civil/structural design and principles., • Have a strong background in producing drawings, • Proficient in AutoCAD, • Able to train and mentor site engineers and others to produce in accordance with standards., • Prior experience of ProjectWise and Revit beneficial but not essential., • Basic awareness of ISO 19650 (Level 2 BIM) or BS1192 and associated PAS/BS 1192 codes required.Whats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued.Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. JBRP1_UKTJ

Contract: Senior Core Network Engineer Start Date: ASAP (once background checks are completed) Duration: 6 months + Location: Hybrid (2 days a week in either London (City) , Cheshire or SE London Rate: £400 - £465 a day (Deemed inside IR35 via umbrella solution) Reference: 20795 Looking for a Senior engineer with deep Cisco IOS-XR expertise, strong Cisco NSO automation experience, and a proven track record delivering large-scale network migrations, software upgrades, hardware refresh programmes, and automation initiatives within complex global enterprise or service provider environments. You will be capable of delivering SIM Core and Core 2.0 transformation programmes, including Cisco 8000 deployments, IOS-XR lifecycle management, and NSO-based network automation. Role Summary Contract with IT Systems Integrator working on a global Banking client project. Senior Core Network Engineer to join the EMEA Internal Networks Engineering team. Responsible for the design, implementation, automation, and lifecycle management of the firm's global Core Network infrastructure. This role requires strong expertise in Cisco IOS-XR, Cisco NSO, MPLS Segment Routing, Optical Transport technologies, and large-scale network migrations. The engineer will act as a technical SME, leading network transformation initiatives, software upgrades, hardware refresh programmes, automation development, and operational improvements across EMEA and the global network estate. Key Responsibilities Core Network Engineering • Design, implement, and support large-scale WAN, MAN, and Optical Transport networks., • Lead migration and transformation programmes involving:, • Cisco 8000 Series Routers (8011/8212) / Cisco ASR 9000 Series / Cisco NCS 5500/5700 Platforms / Cisco DWDM Platforms / Arista Routing and Optical Platforms, • Develop Low-Level Designs (LLDs), implementation procedures, migration runbooks, and rollback plans., • Deliver network software upgrades, platform lifecycle activities, and hardware refresh programmes., • Provide technical leadership for complex engineering and transformation projects. Cisco IOS-XR • Expert knowledge of Cisco IOS-XR architecture, operations, and troubleshooting., • Strong experience with:, • Segment Routing (SR-MPLS) / MPLS L2VPN/L3VPN / ISIS / BGP / OSPF / EVPN / Multicast (mLDP/PIM) / QoS / IPv4/IPv6, • Troubleshoot routing, forwarding, and control-plane issues within large-scale production environments. Network Automation & Cisco NSO • Develop and maintain Cisco NSO automation solutions., • Design and support:, • Service Models / YANG Models / Python Automation / NETCONF/REST APIs / Templates and Workflow Integration, • Develop automation capabilities for provisioning, compliance validation, configuration management, and software upgrades., • Drive Infrastructure-as-Code and model-driven network automation initiatives. Operational Excellence • Produce and maintain engineering standards, operational procedures, and technical documentation., • Support change management processes including CRQs, CAB reviews, and implementation activities., • Perform root cause analysis and drive continuous service improvement., • Collaborate with architecture, operations, vendors, and project teams to deliver strategic initiatives. Required Skills Core Networking • 10+ years of experience within large enterprise or service provider environments., • Expert knowledge of:, • MPLS / Segment Routing (SR-MPLS) / ISIS / BGP / OSPF /EVPN / L2VPN/L3VPN / Multicast / QoS / IPv4/IPv6 Cisco IOS-XR • Cisco 8000 Series / ASR 9000 / NCS 5500/5700 Cisco NSO & Automation • Strong Cisco NSO experience., • YANG / Python / NETCONF / REST APIs / gNMI / Git Optical Networking • Cisco DWDM / Optical Transport Networks / Dark Fibre /Carrier Services / Metro Ethernet / Long-haul Optical Infrastructure Tools & Technologies • Cisco NSO / Forward Networks / HPNA / SevOne / Splunk / NetScout / Wireshark / NNMi OBM / IBM Watson / Jira Confluence Professional Skills • Strong analytical and troubleshooting skills., • Excellent verbal and written communication., • Strong stakeholder management and vendor engagement experience., • Ability to work independently and lead technical initiatives. Networking People (UK) is acting as an Employment Business in relation to this vacancy. JBRP1_UKTJ

Manufacturing Engineer Exeter, Devon £45,000 + Staff discount scheme + 34 days holiday + Benefits We are recruiting on behalf of an innovative manufacturing business based near Exeter, seeking a Manufacturing Engineer to play a key role in supporting new product development, improving manufacturing processes, and driving continuous improvement initiatives across the business. The Role: Provide manufacturing and assembly expertise throughout the product development lifecycle. Drive Design for Manufacture (DFM) and assembly improvement initiatives. Lead R&D projects focused on cost reduction and quality enhancement. Deliver continuous improvements across existing products and processes. Collaborate with NPD engineers to develop practical manufacturing solutions. Conduct component and assembly tolerance assessments. Lead and support DFMEA reviews and risk assessments. Identify and mitigate manufacturing risks prior to production. Support the successful transition of new products from design to manufacture. What we are looking for: Degree qualified in Mechanical Engineering or a related engineering discipline. FMEA training or experience desirable. Strong understanding of engineering design principles and Design for Manufacture (DFM). Ability to create and interpret engineering drawings and technical specifications. Excellent knowledge of sheet metal manufacturing, assembly techniques, materials, and tolerancing. Experience identifying manufacturing risks during product development and design stages. Code: INDENM If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. TPBN1_UKTJ

Manufacturing Engineer An excellent opportunity for a practical, hands-on engineering professional to support process improvement, Lean Manufacturing and operational efficiency across a busy manufacturing environment. If youve also worked in the following roles, wed also like to hear from you: Production Engineer, Process Engineer, Continuous Improvement Engineer, Lean Manufacturing Engineer, NPI En... JBRN1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland. We are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Quality Engineer. A Quality Engineer focuses on implementing quality assurance and quality control processes at the operational level. They work closely with production or project teams to ensure products or services meet defined quality standards. Due to the sensitive nature of the site, BPSS security clearance is required. Please note that this process can take up to 8 weeks. Candidates must hold a passport from a NATO or MISWG member country and have resided in the UK for the past 5 years. Making Possible In this role, you will be working in a live MOD facility. Your day-to-day tasks will include: • Develop and execute inspection and testing procedures, • Conduct root cause analysis and support problem-solving activities, • Monitor production or construction processes for quality compliance, • Review documentation and verify that materials/products meet specifications, • Support audits and quality system implementations, • Assist in corrective and preventive action (CAPA) processes, • Collect and analyse quality data to identify trends and improvements This profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given. What do you bring to the role? • Professionally qualified operator and/or Graduate, • Quality related qualifications and Industry experience ie ISO, • Experience of similar role, preferred in relevant sector (ie Nuclear and Defence), • CSCS - Green labourer, • Strong understanding of quality principles, inspection methods, and testing, • Familiarity with quality tools (e.g., FMEA, SPC, root cause analysis), • Knowledge of relevant standards (ISO 9001, industry-specific), • Basic statistical and data analysis skills, • Good communication and problem-solving abilitiesWhats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional development JBRP1_UKTJ

Junior Manufacturing Engineer (Sheet Metal / R&D) £38,000 - £40,000 + 24 days Holiday + Training & Development + Pension + Flexible Working Hours + Free Parking Exeter Are you a Mechanical Engineer with experience in manufacturing and Design for Manufacture, looking to play a key role in the development of innovative products from initial concept through to production? Do you enjoy working alongside d... JBRN1_UKTJ

Principal Civil Engineer £65,000 + Benefits UK Wide Hybrid Working (2 Days Per Week On Site) Due to the nature of the projects you will need to be a Sole UK National to apply for this role Outsource UK are recruiting for a Principal Civil Engineer to join a leading consultancy delivering complex and high-profile projects across the UK. This is an excellent opportunity for an experienced civil engineering professional looking to take a leading role in the design and delivery of major urban development and infrastructure schemes. Working within a multidisciplinary environment, you will provide technical leadership across a range of building and development projects, with a focus on drainage, highways, utilities, earthworks and site development. Experience within industrial manufacturing, technology or defence sectors would be advantageous. As a Principal Civil Engineer, you will be responsible for leading engineering activities from concept through to delivery, ensuring high-quality, sustainable and practical design solutions. You will work closely with multidisciplinary teams, project stakeholders and clients, while supporting and mentoring junior engineers. Key responsibilities include: • Leading civil engineering design activities across a range of development projects., • Managing the production and review of drawings, BIM models, reports and technical specifications., • Coordinating multidisciplinary design teams to deliver integrated engineering solutions., • Overseeing project planning, resource allocation and programme management., • Managing design risk, hazard logs, assumptions registers and design decision records., • Attending and leading project meetings with clients and stakeholders., • Providing technical guidance, leadership and mentorship to engineers, technicians and apprentices., • Ensuring projects are delivered in line with quality, safety and engineering standards. About You To be successful in this role, you will have:, • A degree in Civil Engineering or a related discipline., • Sole UK National, • Chartered or Incorporated Engineer status, or be working towards chartership., • Strong experience in civil engineering and urban development design., • Proven knowledge of surface water drainage, foul drainage, highways and utility infrastructure., • Experience using MicroDrainage/InfoDrainage, AutoCAD Civil 3D and BIM processes., • Good understanding of industry standards including SuDS, Sewers for Adoption, DMRB and Building Regulations., • Project management experience, including planning, commercial awareness and client engagement., • The ability to lead teams, manage workloads and develop junior engineers., • Strong technical problem-solving skills with the ability to apply engineering principles effectively. If you're an experienced Civil Engineer looking for your next challenge and the opportunity to lead on exciting projects across the UK, we'd love to hear from you. Apply today through Outsource UK. Inclusion Statement: Outsource UK is committed to creating a diverse and inclusive environment and is proud to be an equal opportunity employer. You'll receive fair consideration for your application regardless of your race, religion or belief, gender, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age. We're proud Corporate Members of the Hidden Disabilities Sunflower. If you need any adjustments at any stage - from application to interview or in your new role - please let us know. We're here to support you every step of the way. We believe diversity of thought and background makes us stronger, and we welcome applications from people of all backgrounds and life experiences. JBRP1_UKTJ

Design Metrologist The Opportunity: A Mechanical Engineering Graduate or HNC qualified Engineer / Technician will thrive in this interesting role using your existing Mechanical Design skills whilst developing an additional understanding of Metrology. Working within a leading aerospace and advanced-manufacturing business, the Design Metrologist joins an existing team during an exciting period of growth. The role includes using 3D CAD software to create engineering models and technical drawings, carrying out the dimensional inspection of components, and designing prototype models for 3D printing to support inspection and manufacturing processes. Really varied role, involving both office and hands on engineering work. The Role: • Using 3D CAD software to interrogate models and design part marking templates and fixturing for part inspection., • Dimensional inspection of products and tooling with the production of FAI reports., • Programming automated inspection equipment such as Coordinate Measuring Machines and structured light systems., • Applying first principles inspection methods and use of standard measurement equipment., • Dimensional calibration of measurement equipment.Preferred Skills:, • Mechanical Engineering / Automation / Metrology Degree or equivalent preferable, although an Higher National Certificate level in Mechanical Engineering (or equivalent) will be considered., • Proficient in 3D CAD Design., • An understanding of metrology or a keen interesting in learning the role of a Metrology Engineer.Working Hours: 8.00am-4.00pm Monday to Friday Associated Benefits: Competitive salary of £37-39700 depending on your experience and qualifications as graduates AND highly experienced candidates will be considered. Day working (Mon-Fri) and a range of benefits including company bonus and an excellent pension scheme and 25 days annual leave plus bank holidays. Progression is encouraged, as is professional development. Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy. Please note that this specific role may be subject to export control restrictions, including under ITAR. Any offer of employment from this particular company will be conditional on the successful candidate meeting the applicable legal requirements for access to controlled information or technology. JBRP1_UKTJ

Maintenance Engineer (Mechanical, Electrical, or Multi-Skilled) 3 shift or 12 hr continental available Up to £57,500 per annum + Bonus + Enhanced Overtime + Full Sickness Pay + 10% employer Pension Location: Exeter Are you a skilled Maintenance Engineer looking for a role with top-tier pay, job security, and career progression at a well-invested site? This is a rare opportunity to join a world-class, globally recognised production site that is a leader in its field. Backed by a multi-billion-pound global turnover, this company is a powerhouse in advanced engineering and manufacturing, supplying critical components worldwide. With a long-standing history of success, they invest heavily in their maintenance team, reflected in high retention rates and career growth opportunities. Engineers benefit from funded qualifications for mechanical engineers looking to gain electrical NVQs and become multi-skilled, as well as options to pursue HNCs and further technical development. If you have experience in hydraulics, large-scale production machinery and are looking to join a supportive team that nurtures talent, this role could be the perfect fit for you. What You'll Be Doing Carrying out planned preventative maintenance (PPM) on a range of heavy industrial machinery, ensuring high reliability and efficiency. Responding to reactive maintenance needs when necessary, but working within a well structured maintenance culture that prioritises PPM schedules. Working with cutting-edge equipment such as vacuum systems, hydraulic presses, CNC machines, X-ray machinery, kilns, furnaces, automated conveyors, and robotic systems. Using your problem-solving skills to troubleshoot and optimise equipment performance. Collaborating with a highly skilled engineering team in a facility known for first-class maintenance standards and an exemplary health & safety record. Contributing to continuous improvement initiatives and safety enhancements. What's In It for You? Job security & stability - work for a financially strong and well-established company. Flexible shift patterns to suit work-life balance. Uncapped overtime - huge earning potential. Career progression & funded training, including conversion courses for mechanical engineers to gain electrical qualifications should they wish! 10% employer pension contribution - significantly above industry standard. 6x annual salary life assurance & full sick pay. Health scheme & employee assistance programmes. Attendance & company-wide performance bonuses. Union support and a highly supportive work environment. 25 days of annual leave + bank holidays and xmas shut down not deducted form a/l! What We're Looking For Relevant level 3 qualifications Experience in a heavy industry setting or strong aptitude and willingness to work with large hydraulic systems. Physically fit and comfortable working in a hands-on environment. Someone who can demonstrate a real passion for engineering - whether it's car restoration in your space time, or showing a real flare for problem-solving in an engineering setting. A proactive mindset with logical fault-finding and problem-solving skills. A willingness to learn and develop within a high-performing team. Are You Up for the Challenge? This is a unique chance to join an elite engineering team, working in an environment that values expertise and continuous improvement. Whether you're a Mechanical Fitter, Electrical Maintenance Engineer, or Multi-Skilled Engineer, if you have the skills and motivation, we want to hear from you! Apply now to find out more about this opportunity! Know someone who might be interested? We offer a generous referral scheme! TPBN1_UKTJ

Position: Production Engineer - Machining & Automation.

Design Engineer to develop innovative manufactured products from concept to production, focusing on manufacturability and commercial viability.

Manufacturing Development Engineer The Opportunity: If you’re a sheet metal Manufacturing Engineer or Development Engineer then this is a wonderful opportunity to work on British designed, British made, and British sold products. You will work within the Design and Development team, ensuring that designs are fit for technically robust, manufacturable, repeatable and cost-effective. The Manufacturing Development Engineer will provide manufacturing and assembly guidance throughout new product design and prototype iterations and improve design for manufacture initiatives throughout the R&D department. The Opportunity: Using your practical experience within a sheet metal environment, and your knowledge of welding, you will challenge designs where appropriate and work closely with NPD design engineers by recommending practical solutions to improve part manufacturability and repeatability Assess component and assembly tolerances, access, fastening methods, material selection and other design considerations that may affect manufacture Provide guidance on manufacturing requirements to support design decisions throughout the product development process Ensure Production Engineering initiatives are implemented within designs, such as cost reduction and optimisation driven improvements Provide support throughout pre-production buildsPreferred Skills: Degree or equivalent qualification in Mechanical Engineering, or a related Engineering discipline Strong understanding of engineering design principles and experience in advising on design for manufacture Strong understanding of sheet metal manufacturing processes, assembly, materials and associated tolerances including their influence on product design – welding experience essential Ability to identify manufacturing risks within early design and product development phasesAssociated Benefits: A competitive salary up to £40000 Company Pension Scheme, 5% contributory Salary Sacrifice scheme. Working Hours: 8.00am – 4.30pm Mon to Friday Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy

Gauging Engineer The Opportunity: What a fabulous opportunity for an experienced Engineer with experience of Gauging and Measurements or Calibration. The Gauge Engineer will provide technical expertise for manufacturing processes on this expansive, engineering site, focusing on measurement equipment for production gauging. The Manufacturing Engineer / Gauging Engineer will be to develop automated manufacturing processes whilst offering the team measurement expertise. The Role: Create, verify and release measurement programs for automated measurement equipment including 3D structured light systems (Zeiss Scanbox) & CMM Design and deliver tooling and fixtures for manufacturing processes Development and implementation of new advanced manufacturing equipment and automation Support justification of capital funding requests Cost reduction and process improvement of current manufacturing techniques. Creating and maintaining all documentation including SOPs, EMSs, JSAs for Production gauging and other Automated operations Support NADCAP compliance for NADCAP controlled manufacturing equipment Mentor other team members in CAD, GD&T & Automation Support identification and implementation of new manufacturing technology Responsible for program storage, data back-ups and revision control for Manufacturing equipment Implement and support EH&S activitiesPreferred Skills: Minimum of a HNC or equivalent in an Engineering discipline Minimum of five years’ experience in an engineering environment Knowledge of 3DSL measurement equipment CMM Programming experience (Renishaw Modus) Experience in Aerofoil Inspection Experience trouble-shooting mechanical systems (pneumatics, tooling, measurement feedback systems) Knowledge of automation systems Good understanding of Engineering drawings and GD&T Good understanding of tooling and fixture designWorking Hours: 8.00am-4.00pm Monday to Friday Associated Benefits: Competitive salary in the region of £45000 depending on your experience and qualifications.Day working (Mon-Fri) and a range of benefits including company bonus and an excellent pension scheme and 25 days annual leave plus bank holidays. Progression is encouraged, as is professional development. Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy. Please note that this specific role may be subject to export control restrictions, including under ITAR. Any offer of employment from this particular company will be conditional on the successful candidate meeting the applicable legal requirements for access to controlled information or technology

Location: Exeter, Devon (On-site) Duration: Long-Term Freelance Start Date: Immediate / ASAP We are recruiting a hands-on Site Engineer to join a leading renewables and infrastructure contractor on a commercial solar farm scheme near Exeter. This is an immediate start opportunity for a setting-out engineer who thrives in a fast-paced environment and is comfortable taking active charge of daily site management. The Role Reporting to the Project Manager, you will drive technical accuracy on the ground while taking responsibility for subcontractor management. Your day-to-day will involve: Setting Out: Executing precise dimensional control for pile foundations, array frames, inverter stations, perimeter fencing, and internal access tracks. Subcontractor Management: Managing small specialist subcontractors on site, keeping teams organized, and driving daily production targets. Quality Assurance: Managing quality control on the ground, carrying out as-built surveys, and ensuring installations meet project specifications. Site Supervision: Keeping detailed daily site diaries, tracking progress against lookahead schedules, and resolving technical site queries quickly. HSEQ Compliance: Enforcing strict site safety standards, carrying out site inductions, and ensuring compliance with RAMS. Essential Requirements Renewable / Groundworks Experience: Proven track record as a Site Engineer on solar farm schemes, heavy groundworks, or land development projects. Setting-Out Precision: Highly proficient in using modern robotic total stations and GPS surveying equipment. Subcontractor Oversight: Demonstrated experience managing small sub-contractors and direct labor teams on site. Site Credentials: Valid CSCS card and SMSTS or SSSTS. Availability: Immediately available to start on site in Exeter with a full UK driving licence. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Role: Civil Engineer Location: Exeter Salary: £34k-£47k plus benefits Ref: MAR218 Are you a skilled Civil Engineer looking for your next challenge? I am currently seeking a talented and motivated professional to join an innovative and dynamic team in a well-respected engineering firm in Exeter. The company is seeking a motivated Civil Engineer to join their expanding team, offering the chance to take on diverse projects and challenges. This role provides excellent career development opportunities, allowing growth in engineering skills and business acumen while working closely with senior management. Requirements: • BSc or BEng qualified • Site appraisals, feasibility assessments • Pre-application planning advice, technical support for outline and detailed planning applications and the approval of reserved matters, discharging planning conditions • Production of pre-planning reports, including Flood Risk Assessments, Foul Drainage & Utility Assessments • Drainage remedial works • Earthworks modelling • Highways design local authority and private residential / commercial (S38 / 184 / 278) • Road and Sewer / SuDS Adoption What’s On Offer: • Competitive salary • Initial 25 days holiday (3 held for the Christmas period) • Additional holiday can be accrued in accordance with the number of years services, up to a total of 28 days • ICE Training Scheme • Paid professional membership • Free on-site parking What to do next: If you are interested in this Civil Engineer role in Exeter, then please click on the link to apply. If you are interested in hearing about any other opportunities within Civil Engineering, Structural Engineering, Drainage Engineering, Flood Risk Engineering, or Transport Planning, then please do not hesitate in getting in touch with Martin on (phone number removed) for further information on the positions we currently have available

Junior Mechanical Design Engineer (Sheet Metal / Solid Edge) £38,000 - £40,000 + 24 days holiday + Training & Development + Pension + Flexible Working Hours + Free Parking Exeter Are you a Mechanical Design Engineer looking to take the next step in your career with a new and exciting challenge with a well-established company? Do you have experience of working with new product design and development and want to work for an established and growing manufacturer that values its employees with a proven track record of developing and promoting new staff who are investing in Continuous improvement and driving innovation? On offer is a role reporting to the Technical Engineering Manager. You will be responsible for the design, engineering and specification of all new products alongside the maintenance of the existing product range, and any modifications, that may become necessary. Reporting to the Technical Engineering Manager and alongside the Design team, you will be expected to generate production ready designs and help ensure the smooth running of the department, ensuring new products are concluded with the agreed timescales and to the standards expected. The role: Work closely with the Technical Engineering Manager, design and development department taking products from conception to detailed engineering drawings for manufacture Determine manufacturing methods for engineering designs Carry out DFMEA at the outset of each project Ensure that tolerance analysis is carried out during the design process Work with all departments involved in the NPD program, in particular, Development, Production Engineering & Purchasing, ensuring design for manufacture is implemented prior to product handoverThe person: Either degree educated or a proven engineering background with a strong bias to mechanical engineering Sheet metal manufacture experience and knowledge of sheet metal processesReference Number: BBBH27153 Keywords: Mechanical Design Engineer, DFMEA, Solid Works, Solid Edge, Sheet Metal, Exeter We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website

Design Engineer Exeter | £35,000 - £42,000 + Benefits | Permanent | Monday-Friday ATA Recruitment are supporting an established and growing engineering solutions business is seeking a Design Engineer to join its Exeter operation. This is an excellent opportunity to become part of a specialist engineering team delivering custom hydraulic and pneumatic systems for blue-chip clients across aerospace, defence, manufacturing, FMCG, water, and industrial sectors. With significant investment, ambitious growth plans, and a strong reputation for delivering complex engineering solutions, this role offers the chance to work on technically challenging projects while developing your expertise in hydraulic system design. About the Company Our client is part of one of the UK's leading engineering and industrial component groups, employing over 600 people nationwide and supplying engineered solutions to some of the world's most recognised manufacturing and industrial organisations. Their a specialist engineering division designs, manufactures, tests and installs bespoke systems, the Exeter operation delivers full turnkey projects, taking solutions from concept and design through to manufacture, installation, commissioning and ongoing support. Customers include major organisations operating within aerospace, defence, advanced manufacturing, food production and industrial engineering environments. The Role As Design Engineer, you will be responsible for designing bespoke systems and supporting structures for a wide variety of industrial applications. Projects typically range from £5,000 to £450,000 and involve a combination of hydraulic, mechanical and fabrication design work. You will work closely with production, installation teams, suppliers and customers to ensure solutions are practical, cost-effective and manufacturable. Key Responsibilities Design hydraulic power units and hydraulic systems for industrial applications Produce detailed 3D models using SolidWorks Create manufacturing and assembly drawings Design hydraulic cylinders and associated components Carry out Design for Manufacture (DFM) activities Design fabricated structures including: Frames Skids Enclosures Bracketry Fabricated assemblies Support projects from concept through to manufacture Liaise with suppliers, customers and internal engineering teams Support continuous improvement and engineering best practice initiatives What We're Looking For We are keen to speak with Design Engineers, Mechanical Design Engineers, Project Design Engineers or Product Design Engineers from a manufacturing or engineering environment. Essential Requirements Experience in a mechanical design role Proficient in SolidWorks or similar 3D CAD package Experience producing detailed manufacturing drawings Strong understanding of fabrication and sheet metal design Ability to interpret engineering specifications and customer requirements Good communication and problem-solving skills Desirable Experience Hydraulic system design Pneumatic system design Mechanical handling equipment Industrial machinery Fluid power systems Pressure systems Defence or aerospace projects Design calculations and technical specifications Candidates without direct hydraulic design experience are encouraged to apply, as full training and development can be provided for engineers with strong mechanical design fundamentals. What's On Offer £35,000 - £42,000 basic salary 25 days holiday plus bank holidays Company pension Career progression within a growing engineering group Exposure to diverse engineering projects Technical training and development Opportunity to develop specialist hydraulic design expertise Stable, long-term career prospects Why Apply? This is an opportunity to join a business that combines the resources and stability of a major engineering group with the flexibility and technical variety of a specialist engineering company. You'll work on bespoke projects rather than repetitive product design, gain exposure to high-profile customers and develop highly sought-after skills in hydraulic system engineering. If you're a Mechanical Design Engineer who enjoys solving engineering challenges and wants to be involved in projects from concept through to installation, we'd like to hear from you ATA Recruitment are working exclusively with this client we will be conducting a short list starting today, we will conduct the 1st interview over the phone and the successful candidates will then be forwarded to our client with our recommendation. If you wish to be considered for this opportunity then please respond with your intention as we are looking to fill this role in the not-so-distant future, you will then be contacting by one of our Recruitment Consultant who will be able to provide more details. Contact: Bhav Patel Recruitment Consultant (phone number removed) (url removed) ATA Recruitment specialises in Manufacturing, Infrastructure, Civil, Transportation and general Engineering recruitment on both a permanent and contract basis – for more opportunities like this one, visit our website. By applying you accept the terms of our Privacy Notice which can be found on our website ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Junior Manufacturing Engineer (Sheet Metal / R&D) £38,000 - £40,000 + 24 days Holiday + Training & Development + Pension + Flexible Working Hours + Free Parking Exeter Are you a Mechanical Engineer with experience in manufacturing and Design for Manufacture, looking to play a key role in the development of innovative products from initial concept through to production? Do you enjoy working alongside design engineers, challenging designs, solving manufacturing problems and improving the way products are designed, assembled and manufactured? The company are a leading UK manufacturer of high-quality heating products, with a strong reputation for innovation, engineering excellence and product development. Based in Exeter, the business operates a significant Research & Development function focused on developing and improving its product range, combining detailed engineering design with advanced manufacturing processes. This is an excellent opportunity for a Mechanical Engineer to join the R&D team and take ownership of the manufacturability of new products, ensuring designs are technically robust, repeatable, cost-effective and suitable for efficient production. The Role: Provide manufacturing and assembly guidance throughout the new product development process Review and challenge product designs to improve manufacturability, repeatability and cost-effectiveness Identify manufacturing, assembly, tooling and material challenges at the early stages of product development Assess component and assembly tolerances, fastening methods, material selection and access requirements Ensure designs are suitable for efficient and repeatable manufacture using the intended production processes Influence component geometry, tolerances and part standardisation to improve manufacturing efficiencyThe Person: Degree or equivalent qualification in Mechanical Engineering or a related discipline Understanding of sheet metal manufacturing and fabrication processesReference Number: BBBH27155 Keywords: Manufacturing Engineer, Design for Manufacture, DFM, Mechanical Engineer, Design Engineer, Production Engineer, Manufacturing Engineering, Product Development, New Product Development, NPD, Mechanical Design, Product Design, Lean Manufacturing, Quality Improvement, Tolerance Analysis, Engineering Tolerances, Materials Selection, Production Engineering, Mechanical Engineering, Manufacturing, Engineering, Exeter, Devon We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website

Mechanical Design Engineer Office Based, Exeter - commutable from Sidmouth, Exmouth, Torquay, Tiverton and surrounding areas. £36,500-£40,000 + Office Based, Monday to Friday + Hybrid (1 day a week from home) + Holiday + Pension + Company Benefits + Early Finish on Fridays Are you a Mechanical Design Engineer looking to build deep technical expertise in product development? Do you have experience taking products from concept through to production-ready design, with Solid Edge or SolidWorks? This is a secure, permanent position where you'll be trusted to own engineering design work end-to-end, while being properly supported by an established technical team and strong company benefits package. You'll be joining a design and manufacturing business supplying products internationally, with a strong focus on quality standards and design-for-manufacture-ideal if you enjoy doing things properly and seeing your designs make it to production. Working within the existing design team, you'll produce detailed engineering drawings for manufacture, support new product development, and collaborate closely with Development, Production Engineering and Purchasing to ensure smooth product handover. This role suits a Mechanical Design Engineer motivated by technical progression and becoming a recognised specialist, with structured engineering work across NPD and manufacturable design rather than a "same drawings every day" routine. The Role: Mechanical Design Engineer, Manufacturing Engineer/ Production Engineer / Development Engineer Developing new and existing products Concept to Completion Working within Engineering team *Working with a team to resolve process issues and identify areas for improvement The Person: Mechanical Design Engineer, Manufacturing Engineer/ Production Engineer / Development Engineer or similar backgrounds all considered Experience working in a Manufacturing environment - sheet metal experience would be advantageous Knowledge and experience using Solid Edge / Solid Works Extensive knowledge of mechanical principals (qualifications ideally) Reference Number: BBBH(phone number removed) To apply for this role or for to be considered for further roles, please click "Apply Now" or contact Nick Phillips at Rise Technical. This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed Rise Technical Recruitment Limited is acting as an Employment Agency in relation to this vacancy

Maintenance Technician (Mech or Elec) The Company: Are you an experienced Maintenance Engineer or Maintenance Technician with either Electrical or Mechanical or Multiskilled skill? In this 3 shift role (combining earlies, lates and nights) you will be responsible for the daily maintenance and repair (preventative and emergency) of a wide range of production and engineering machinery. You will work as part of a well established team of Maintenance Technicians and report into a Maintenance Manager. Job Responsibilities: Minimise production downtime by trouble shooting breakdowns and preventing reoccurrences. Work with electrical and mechanical drawings and documentation undertake fault finding and modification of plant and equipment. Use a Maintenance Management System carry out preventative/ planned maintenance work. Contribute to improvement initiatives aimed at enhancing equipment reliability and reducing recurring issues. Maintain a clean and safe working environment adhering to all EHS Company policies. Continuously enhance job knowledge through training and development opportunities. Perform electrical and mechanical work, including fabrication, welding and some minor electrical installation work as required.Requirements: Successful completion of a time-served apprenticeship with a minimum level 3 qualification, BTEC/City and Guilds or equivalent. Demonstrated multiskilled proficiency in industrial electrical AND/OR mechanical systems, including pneumatic/hydraulic systems, fabrication, and welding. Proven competency in reading and interpreting electrical and mechanical diagrams as well as troubleshooting control panels. Ability to pass medical which includes assessments for working at height and in confined spaces. Computer literacy and familiarity with office software applications. Resilient, resourceful approach, with sound judgment and decision-making skills. Proactive work ethic, strong initiative, and the ability to operate independently within a shift team environment.Pay and Hours: Working across a 3 shift pattern - 3 shifts (earlies, lates and nights), attracting a salary of £42000 (with paid overtime available at £26-27phr) Funded opportunities to study production and engineering qualifications 25 days annual holiday + bank holidays Contributory pension Health care cash back plan Life insurance Company bonus Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy

Maintenance Engineer (Mechanical, Electrical, or Multi-Skilled) 3 shift or 12 hr continental available Up to £57,500 per annum + Bonus + Enhanced Overtime + Full Sickness Pay + 10% employer Pension Location: Exeter Are you a skilled Maintenance Engineer looking for a role with top-tier pay, job security, and career progression at a well-invested site? This is a rare opportunity to join a world-class, globally recognised production site that is a leader in its field. Backed by a multi-billion-pound global turnover, this company is a powerhouse in advanced engineering and manufacturing, supplying critical components worldwide. With a long-standing history of success, they invest heavily in their maintenance team, reflected in high retention rates and career growth opportunities. Engineers benefit from funded qualifications for mechanical engineers looking to gain electrical NVQs and become multi-skilled, as well as options to pursue HNCs and further technical development. If you have experience in hydraulics, large-scale production machinery and are looking to join a supportive team that nurtures talent, this role could be the perfect fit for you. What You'll Be Doing Carrying out planned preventative maintenance (PPM) on a range of heavy industrial machinery, ensuring high reliability and efficiency. Responding to reactive maintenance needs when necessary, but working within a well structured maintenance culture that prioritises PPM schedules. Working with cutting-edge equipment such as vacuum systems, hydraulic presses, CNC machines, X-ray machinery, kilns, furnaces, automated conveyors, and robotic systems. Using your problem-solving skills to troubleshoot and optimise equipment performance. Collaborating with a highly skilled engineering team in a facility known for first-class maintenance standards and an exemplary health & safety record. Contributing to continuous improvement initiatives and safety enhancements. What's In It for You? Job security & stability - work for a financially strong and well-established company. Flexible shift patterns to suit work-life balance. Uncapped overtime - huge earning potential. Career progression & funded training, including conversion courses for mechanical engineers to gain electrical qualifications should they wish! 10% employer pension contribution - significantly above industry standard. 6x annual salary life assurance & full sick pay. Health scheme & employee assistance programmes. Attendance & company-wide performance bonuses. Union support and a highly supportive work environment. 25 days of annual leave + bank holidays and xmas shut down not deducted form a/l! What We're Looking For Relevant level 3 qualifications Experience in a heavy industry setting or strong aptitude and willingness to work with large hydraulic systems. Physically fit and comfortable working in a hands-on environment. Someone who can demonstrate a real passion for engineering - whether it's car restoration in your space time, or showing a real flare for problem-solving in an engineering setting. A proactive mindset with logical fault-finding and problem-solving skills. A willingness to learn and develop within a high-performing team. Are You Up for the Challenge? This is a unique chance to join an elite engineering team, working in an environment that values expertise and continuous improvement. Whether you're a Mechanical Fitter, Electrical Maintenance Engineer, or Multi-Skilled Engineer, if you have the skills and motivation, we want to hear from you! Apply now to find out more about this opportunity! Know someone who might be interested? We offer a generous referral scheme

MECHANICAL DESIGN ENGINEER THE ROLE Sitting within the design team, this role covers the design, engineering and specification of new products alongside ongoing support of the existing product range, including reviewing products for design optimisation and manufacturability. Reporting to the Technical Engineering Manager, the successful candidate will produce production ready designs, provide guidance on design for manufacture, and deliver both existing and new product projects to agreed timescales and standards. ROLE ACCOUNTABILITIES • Work closely with the Technical Engineering Manager and the Design and Development department, taking products from concept through to detailed engineering drawings ready for manufacture. • Partner with the Production Engineering department to refine existing designs, reducing cost and improving efficiency while maintaining product quality. • Assess and advise on manufacturing methods for engineering designs, taking into account both in house and external manufacturing capability. • Lead DFMEA activity at the start of each project, tracking completion of identified actions and working with the Development team to identify potential design failure modes. • Apply a solid understanding of both DFMEA and tolerance stack up analysis. • Carry out tolerance analysis throughout the design process to support ease of manufacture and product function, and to prevent tolerance build up issues during manufacture and assembly. • Collaborate across the NPD programme, particularly with Development, Production Engineering and Purchasing, to ensure design for manufacture principles are applied before product handover. • Keep new product progress feedback sheets accurately completed and up to date. PERSON SPECIFICATION • Degree educated, or able to demonstrate an equivalent engineering background with a strong bias towards mechanical engineering. • A track record of taking products from initial prototype through to mass production. • Essential knowledge and hands on experience of sheet metal manufacturing processes, including folding and welding. • Demonstrated experience of design for manufacture. • Experience producing DFMEA reports and following through on identified actions. • Experience of tolerance stack up analysis and resolving areas of concern. • Proven experience using Solid Edge; candidates with experience of comparable CAD packages will also be considered. • Able to produce 2D production drawings in line with GD&T best practice. • Experience with folding simulation software is desirable but not essential. • Strong written and verbal communication skills. • A genuine commitment to continuous learning and development. • Competent user of Microsoft Office packages. • Strong team working skills. • Comfortable working to defined standards and procedures within an ISO 9001:2015 registered environment. • Organised and structured, with the ability to prioritise workload and use own initiative. BEHAVIOURS AND ATTRIBUTES This role sits within a department that is customer focused and results driven. The successful candidate will be willing to learn, develop skills across a range of disciplines, and lead by example. They should set a high standard for attitude, behaviour and performance, and consistently promote and uphold the company's values

Role: Project Engineer (Mechanical or Electrical) Shift: Monday to Friday, Days Salary: £55,000 - £57,500 + Bonus + Private Healthcare + Life Assurance (6x salary) + Comprehensive Sick Pay Location: Exeter Are you a Project Engineer or an experienced Maintenance Engineer looking to move into projects? Whether your background is electrical or mechanical, this is an opportunity to join a world-class manufacturer investing heavily in its people, facilities and engineering infrastructure. Backed by a multi-billion-pound global organisation, you'll play a key role in delivering capital projects, improving manufacturing performance and supporting the continued development of a highly automated production site. What You'll Be Doing Leading capital projects involving new machinery, production equipment and site infrastructure. Managing equipment installations, upgrades and site improvement projects from concept through to completion. Specifying and sourcing machinery, equipment and engineering components. Managing contractors and ensuring projects are delivered safely, on time and within budget. Developing project plans, equipment layouts and manufacturing improvement initiatives. Supporting reliability improvements by identifying long-term engineering solutions to recurring equipment issues. Providing technical support during installation, commissioning and project handover. Maintaining technical documentation and ensuring compliance with engineering and safety standards. What's In It For You? Monday to Friday days with an excellent work-life balance. 25 days annual leave plus bank holidays, plus a 3-day Christmas shutdown. Annual bonus. Annual salary reviews. 10% employer pension contribution. Private healthcare. Life assurance (6x salary). Comprehensive sick pay (6 months full pay followed by 6 months half pay). Long-term job security with a globally recognised manufacturer. Significant ongoing investment in engineering and manufacturing. Training, development and genuine career progression. What We're Looking For Level 3 or above in Mechanical, Electrical or Manufacturing Engineering, or relevant industry experience. Experience delivering engineering projects within a manufacturing, production or heavy industrial environment. Knowledge of equipment installation, plant upgrades or continuous improvement projects. Understanding of manufacturing performance and reliability improvement. CAD experience and knowledge of CMMS, Oracle or automation systems would be advantageous. A practical engineering background with good knowledge of manufacturing equipment. Strong communication and organisational skills with the ability to work across multiple departments. Ready for Your Next Challenge? This is a fantastic opportunity to join a business that continues to invest heavily in its engineering function. Whether you're already working in projects or you're a hands-on Maintenance Engineer looking to move into a project-focused role, we'd love to hear from you. Apply now to discuss the opportunity in confidence with our specialist engineering recruiter, Liam Reid. Know someone who could be interested? Ask us about our referral scheme

Multi Skilled Maintenance Technician - Exeter Location: Exeter, Devon Salary: Competitive, depending on experience Shift Pattern: 4 on 4 off Job Type: Permanent, Full-Time KPI Recruiting are working with a leading engineering and manufacturing business in Exeter who are looking to recruit an experienced Multiskilled Maintenance Technician to join their busy maintenance team. This is an excellent opportunity for an electrically or mechanically biased engineer who enjoys working in a hands-on manufacturing environment and wants to develop their career within a highly engineered operation. The Role As a Multiskilled Maintenance Technician, you will play a key role in keeping production equipment operating safely and efficiently. You will be responsible for responding to breakdowns, completing planned preventative maintenance and identifying opportunities to improve equipment reliability. Key Responsibilities Carry out planned, preventative and reactive maintenance across a range of industrial machinery and equipment. Diagnose and repair electrical and mechanical faults to minimise production downtime. Fault-find using electrical and mechanical drawings, schematics and technical documentation. Troubleshoot control panels, electrical systems and automated equipment. Complete maintenance activities through a Computerised Maintenance Management System (CMMS). Identify recurring faults and contribute to continuous improvement and reliability initiatives. Carry out mechanical work including fabrication, welding and equipment modifications. Undertake minor electrical installation and modification work where required. Work with pneumatic and hydraulic systems. Maintain high standards of health, safety, housekeeping and environmental compliance. Work effectively as part of a shift-based maintenance team while also being capable of working independently. About You We are looking for a technically capable Maintenance Engineer who can demonstrate solid industrial maintenance experience. You will ideally have: A recognised Level 3 engineering qualification such as City & Guilds, BTEC or equivalent. A completed engineering apprenticeship or strong equivalent industrial experience. Multiskilled electrical and mechanical maintenance experience. Strong fault-finding and diagnostic skills. Experience working with electrical and mechanical drawings. Knowledge of pneumatic and hydraulic systems. Experience with fabrication and welding. Experience working within a manufacturing, engineering or industrial environment. Good computer skills and experience using maintenance management systems. A proactive and practical approach to problem-solving. Electrical or Mechanical specialists will also be considered where they have strong industrial maintenance experience and relevant additional skills. Experience with vacuum technology would be advantageous but is not essential. What's on Offer? Permanent position with a well-established engineering business. Competitive salary based on experience. Structured shift pattern, moving to a continental shift rotation from October. Opportunity to work within a highly engineered manufacturing environment. Ongoing training and development opportunities. Long-term career progression. Varied and technically challenging maintenance role. If you are an experienced Maintenance Engineer, Maintenance Technician, Electrical Maintenance Engineer, Mechanical Maintenance Engineer or Multiskilled Engineer looking for your next permanent opportunity in Exeter, we'd like to hear from you. Apply today with your CV or contact KPI Recruiting's Engineering & Manufacturing team for more information. #INDENG

We are partnered with a specialist electronics manufacturer based near Exeter, Devon, looking for an Electronics Test Engineer to join their production team. This is a hands-on role focused on testing, fault finding and repairing complex electronic products, working alongside an experienced team of engineers. In this Electronics Test Engineer role near Exeter, Devon, you will: Test and fault-find electronic products through production and final test Read circuit diagrams and diagnose faults down to component level Carry out repairs, testing, and firmware or settings updates where required Support the wider production and test team to maintain quality and output The ideal Electronics Test Engineer will have: Experience in electronics testing, repair, fault finding, or a similar engineering environment Good understanding of electronic circuits and the ability to read circuit diagrams Experience with component-level fault finding would be highly beneficial A meticulous, reliable approach with strong attention to detail The role is based near Exeter, Devon and is fully site-based. It is a great opportunity to join a specialist electronics manufacturer who have an excellent reputation in their market. If you're interested in this Electronics Test Engineer role near Exeter, Devon, apply now or contact Ed at (url removed) for more information

Manufacturing Engineer Exeter, Devon £45,000 + Staff discount scheme + 34 days holiday + Benefits We are recruiting on behalf of an innovative manufacturing business based near Exeter, seeking a Manufacturing Engineer to play a key role in supporting new product development, improving manufacturing processes, and driving continuous improvement initiatives across the business. The Role: Provide manufacturing and assembly expertise throughout the product development lifecycle. Drive Design for Manufacture (DFM) and assembly improvement initiatives. Lead R&D projects focused on cost reduction and quality enhancement. Deliver continuous improvements across existing products and processes. Collaborate with NPD engineers to develop practical manufacturing solutions. Conduct component and assembly tolerance assessments. Lead and support DFMEA reviews and risk assessments. Identify and mitigate manufacturing risks prior to production. Support the successful transition of new products from design to manufacture. What we are looking for: Degree qualified in Mechanical Engineering or a related engineering discipline. FMEA training or experience desirable. Strong understanding of engineering design principles and Design for Manufacture (DFM). Ability to create and interpret engineering drawings and technical specifications. Excellent knowledge of sheet metal manufacturing, assembly techniques, materials, and tolerancing. Experience identifying manufacturing risks during product development and design stages. Code: INDENM If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business