Trabajos quality inspection en HinckleyCrear alertas

Job Title: QHSE Manager Department: Quality Department Location: Nuneaton, Reports To: General Manager We are seeking an experienced Quality, Health, Safety & Environmental (QHSE) Manager to lead QHSE performance within a growing advanced manufacturing business serving the aerospace, defence and engineering sectors. Reporting to the General Manager, this is a senior, hands‑on role combining management system ownership with a visible presence across the shop floor. You will work closely with machining, composites, fitting, inspection, finishing, supply chain, engineering and programme teams to drive quality, compliance, safety and continuous improvement throughout the business. • Own and continually improve the Quality Management System (QMS) in accordance with AS9100 and ISO 9001 standards., • Lead and develop the Environmental Management System in accordance with ISO 14001, ensuring legal compliance, environmental objectives, waste controls and performance reporting are effectively managed., • Plan, conduct and manage internal audits, certification audits, customer audits and supplier audits., • Lead external certification, surveillance and customer audit activities, ensuring timely preparation, response and close‑out of findings., • Manage non‑conformances, customer complaints, corrective and preventative actions (CAPA), 8D investigations and root cause analysis., • Maintain effective product traceability, document control procedures, calibration systems and quality records., • Lead site Health & Safety activities, including risk assessments, COSHH compliance, incident investigations, contractor management, training and safe systems of work., • Monitor QHSE performance and present reports and improvement initiatives through management review meetings., • Support customer, aerospace and defence compliance requirements, including AQAP, First Article Inspection (FAI), supplier quality requirements and special process controls where applicable., • Work closely with production teams to support process assurance, inspection controls, risk assessments, problem‑solving and continuous improvement activities., • Promote a positive culture focused on quality, environmental responsibility, operational excellence and safe working practices., • Proven Quality or QHSE Management experience within aerospace, defence, precision engineering or another regulated manufacturing environment., • Strong practical knowledge of AS9100, ISO 9001 and ISO 14001., • Demonstrable experience leading QMS audits, certification bodies, customer audits and corrective action programmes., • Strong understanding of NCR management, CAPA, 8D investigations, root cause analysis and effectiveness verification., • Experience within a manufacturing environment involving machining, composites, tooling, assembly, inspection or complex engineered products., • Ability to communicate effectively and influence stakeholders at all levels of the organisation., • Internal Auditor or Lead Auditor qualification in ISO 9001 and/or AS9100., • NEBOSH General Certificate or equivalent Health & Safety qualification., • Knowledge of AS9102 First Article Inspection (FAI)., • Experience with AQAP and NADCAP requirements., • Understanding of Lean Manufacturing, 5S and Six Sigma methodologies., • Experience implementing continuous improvement initiatives within manufacturing environments. The successful candidate will demonstrate: • Pride in delivering high standards of quality and compliance., • Strong leadership and team‑working abilities., • Reliability and accountability., • Excellent communication and interpersonal skills., • A proactive, hands‑on approach to problem solving., • High levels of organisation and attention to detail., • Commitment to maintaining a clean, safe and professional working environment., • Demonstrate respect and professionalism when interacting with colleagues, customers, suppliers and visitors., • Adhere to company policies, procedures and standards at all times., • Maintain a professional appearance and represent the business positively., • Support the achievement of company objectives through effective collaboration and communication., • Wear the required Personal Protective Equipment (PPE) at all times when required., • Ensure compliance with all company policies, procedures and relevant legislation, including Health & Safety and Equality legislation., • Maintain a thorough understanding of COSHH (Control of Substances Hazardous to Health) requirements and associated control measures., • Comply with Risk Assessments, Safe Systems of Work and Occupational Health recommendations., • Actively contribute to maintaining a safe working environment and promoting a positive safety culture throughout the business. The Adecco Group UK & Ireland is an Equal Opportunities Employer. #J-18808-Ljbffr

For over 50 years Almac Pharma Services has manufactured and packed oral solid dose medicines—tablets, capsules and powders—supplying patients worldwide. An opportunity has become available to join our Manufacturing Support department in the role of Senior Technical Specialist. In this role your primary job purpose is product/process validation, and you will own PPQ campaigns and enable robust CPV for commercial products at our Charnwood site, ensuring processes remain in a validated state and inspection‑ready at all times. You’ll partner closely with Manufacturing Operations and the wider Technical Operations Group to turn science and data into compliant, reliable supply. You may also lead equipment and facility qualification for GMP‑relevant equipment using DQ–IQ–OQ, ensuring systems are designed, installed, operated and perform, and continue to perform as intended. • Lead PPQ: author/approve protocols, define sampling plans and acceptance criteria, oversee execution, analyse data, and issue PPQ summary reports for timely release, • Lead or participate in equipment and facility qualification: Deliver qualification lifecycle for GMP‑relevant equipment using DQ–IQ–OQ-PQ and maintain equipment in validated state through periodic review and scheduled requalification, aligned to site procedures and Annex 15 expectation and including data integrity (ALCOA, computerised system lifecycle principles), • With echnical Operations and Quality, generate URS, generate, review and approve functional/technical specifications, Quality Risk Assessment, Traceability Matrix, IQ/OQ protocols and summary reports., • Investigations & change: lead deviation/CAPA, conduct Quality Risk Management, author change requests, and manage validation impact assessments for changes, • Interface with audits: represent equipment and process validation in customer/regulatory inspections and defend strategy, execution and reports, • Collaborate across functions: work with QA, Analytical/QC, Engineering and Production to execute qualifications or PPQs to plan., • Broader validation: coordinate equipment/cleaning validation to ensure end‑to‑end compliance and data integrity across the lifecycle., • Experience: Proven process validation experience in GMP drug product (OSD preferred), including PPQ leadership and CPV, • Regulatory knowledge: Practical application of FDA 2011 PV, EU GMP Annex 15, and ICH Q8/Q9/Q10., • Statistics & tools: Competence with SPC/trending (e.g., Minitab/JMP) and strong technical writing for protocols and reports., • Quality systems: Experience with eQMS (e.g., TrackWise,) 21 CFR Part 11/Anne 11 and ALCOA+ principles., • Collaboration: Ability to work in and lead cross‑functional teams (e.g. Production, Formulation Development, Engineering), manage multiple PPQ workstreams, and meet committed timelines to plan., • Degree: in Life Science or Engineering, or equivalent A fantastic salary and benefits package is available, including • annual bonuses for all, • generous holiday allowance, • healthcare reimbursement scheme, • rewarding role where the work you do will ultimately be contributing to the advancement of human health Almac will only accept applications from agencies/business partners that have been invited to work on this role by our Talent Acquisition team. Speculative candidate CVs received or submitted directly to Hiring Managers will be considered unsolicited, and no fee will be payable. Thank you for your cooperation. Closing date for receipt of applications is Tuesday 3rd November 2026 at 5pm local time. #J-18808-Ljbffr

Contek Recruitment are currently working exclusively with a precision engineering group, who are expanding and opening up a brand new facility in Nuneaton, Warwickshire. They are looking for a CNC Turner to join their growing team on a full-time, permanent basis. The company are a quality-focused precision engineering/manufacturing and sub-contract machining company specializing in defence project work and the design and manufacture of superior quality work-holding solutions. They predominantly supply the nuclear, aerospace and defence, medical, machine tool, automotive, and power generation sectors. The customer base includes blue-chip organisations such as Rolls Royce, Boeing, Siemens, and Toyota to name only a few. They have capabilities for a range of services, including: CNC milling and CNC turning. Wire erosion (EDM machining) Universal, surface, and jig grinding. Precision assembly. Vibratory finishing. 3D printing. CMM Inspection. JOB ROLE: CNC Turner (Programmer/Setter/Operator) JOB TYPE: Permanent. WORKING HOURS: 39 hours per week - Monday to Thursday (7:15am – 4:15pm) and Friday (7:15am – 12:30pm) OVERTIME: Overtime is consistently available and is paid and time-and-a-half. HOURLY RATE: £19-20 per hour (Dependent on experience) DUTIES & RESPONSIBILITIES Programming, setting and operating a range CNC lathes with driven tooling. Programming at the machine using Siemens controls. Machining complex and high-value components Producing one-off and low-volume precision-engineered parts Reading and interpreting detailed engineering drawings Selecting appropriate tooling, speeds, feeds and machining strategies Carrying out in-process inspection and maintaining high quality standards Working closely with engineering and production colleagues to improve machining processes and reduce cycle times Working to tight deadlines PERSON REQUIREMENTS Strong experience programming, setting and operating CNC lathes with driven tooling. Good working knowledge of Siemens controls Proven experience machining complex components The ability to work confidently and independently A strong understanding of engineering drawings, tolerances and inspection methods A practical, quality-focused approach to problem-solving This is an excellent opportunity to join an established and growing UK engineering group working on technically challenging projects across the aerospace, defence, nuclear and advanced manufacturing sectors TPBN1_UKTJ

The Opportunity Due to substantial growth, an established aerospace manufacturer is looking for experienced CNC Miller Operators to join its precision engineering team. This is an excellent opportunity to secure a permanent position within a growing business, offering competitive pay, regular overtime, training, development and genuine long-term career progression. The Role You will operate CNC milling machinery to produce high-quality precision components in line with engineering drawings, programmes and aerospace quality standards. Key Responsibilities: Operating CNC milling machines and loading/unloading components. Following CNC programmes, engineering drawings and work instructions. Making offset adjustments where required. Monitoring machining processes and identifying issues. Carrying out in-process and final inspections using precision measuring equipment. Working to tight tolerances and maintaining aerospace quality standards. Reporting quality or machining issues and maintaining accurate production records. Meeting production targets without compromising quality. Maintaining a clean, safe and organised working environment. About You Minimum 3 years' relevant CNC milling experience . Confident operating CNC milling machinery and making offset adjustments. Able to read and interpret engineering drawings. Experienced using inspection and precision measuring equipment. Good understanding of machining processes and tight tolerances. Strong attention to detail and a quality-focused approach. Reliable, hardworking and able to work independently or as part of a team. Comfortable working to production targets and undertaking additional overtime when required. Aerospace experience is advantageous, but strong precision engineering experience will also be considered. Keen to develop your skills and build a long-term career. Salary, Benefits & Working Environment £17.67 per hour Shift allowance 3% annual profit share Overtime paid at Time and 1/3 Permanent, long-term employment Day and night shifts available Opportunities to increase earnings through overtime Training, skills development and career progression Join an established aerospace manufacturer experiencing substantial growth Supportive environment focused on developing its people Company pension Casual dress Free and on-site parking Work Location: In person How to Apply If you have at least 3 years' CNC milling experience and want a permanent role offering competitive pay, shift options, overtime and long-term progression within the aerospace sector, apply today to find out more! INDSKILL TPBN1_UKTJ

Advanced Manufacturing | Aerospace, Defence & Engineering | Nuneaton, Warwickshire We're partnering with a growing advanced-manufacturing business supplying demanding aerospace, Defence and engineering markets to recruit an experienced, hands-on QHSE Manager. Reporting directly to the General Manager, this is an exciting opportunity to take ownership of QHSE performance, influence operational standards and drive continuous improvement across a technically complex manufacturing environment. This role is about much more than compliance. You'll be a visible presence across the operation, working closely with manufacturing, engineering, inspection, supply chain and programme teams to embed a culture where quality, safety and environmental responsibility are part of everyday practice. If you're a proactive QHSE professional who enjoys solving problems, challenging constructively and turning standards into practical improvements, this could be your next career move. You’ll lead the development and continual improvement of quality, environmental and health and safety systems, ensuring compliance while supporting operational performance and customer confidence. Your responsibilities will include: Quality management: Own and improve the Quality Management System in line with AS9100 and ISO 9001, maintaining effective traceability, document control, calibration and quality records. Audits and compliance: Lead internal, certification, customer and supplier audits, ensuring robust preparation, effective responses and timely close-out. Problem-solving and corrective action: Manage non-conformances, customer complaints, CAPA, 8D investigations and root-cause analysis, ensuring corrective actions deliver lasting results. Environmental performance: Maintain and develop the Environmental Management System to ISO 14001, covering legal compliance, environmental objectives, waste controls and performance reporting. Health and safety: Lead risk assessments, COSHH, incident investigations, contractor management, training and safe systems of work. Aerospace and Defence requirements: Support relevant customer and industry requirements, including AQAP, First Article Inspection, supplier quality and special-process expectations where applicable. Continuous improvement: Work alongside operational teams to strengthen process assurance, inspection controls, risk management and shop-floor performance. Management reporting: Monitor QHSE performance, present clear reports and contribute to management reviews. You’ll bring proven QHSE or Quality Management experience from aerospace, Defence, precision engineering or another regulated manufacturing environment, together with the confidence to influence people at every level. Ideally, you’ll have: Strong practical knowledge of AS9100, ISO 9001 and ISO 14001. Experience leading audits, certification activity and customer or supplier audit programmes. A solid understanding of NCR management, CAPA, 8D, root-cause analysis and corrective-action verification. Manufacturing experience, ideally involving machining, composites, tooling, assembly, inspection or complex engineered products. The ability to translate compliance requirements into practical, effective shop-floor controls. Strong communication, problem-solving and stakeholder-management skills. An internal or lead-auditor qualification in ISO 9001 and/or AS9100. A recognised health and safety qualification, such as the NEBOSH General Certificate, would be highly desirable. Knowledge of AS9102 First Article Inspection, AQAP, NADCAP, Lean, 5S or Six Sigma would also be advantageous. This is a chance to combine technical expertise with visible leadership in a demanding, quality-critical manufacturing environment. Working closely with the General Manager, you’ll have the opportunity to influence standards, strengthen processes and build relationships across the operation. You’ll play a key role in improving quality, protecting people, supporting customer requirements and driving a culture of accountability and continuous improvement. We’re looking for someone who takes pride in high standards, works collaboratively and understands that effective QHSE is achieved through engaging people, preventing problems and continually raising performance. Location: Nuneaton, Warwickshire Position: QHSE Manager Sector: Advanced Manufacturing | Aerospace | Defence | Engineering Equal opportunities are important to us. We believe that diversity and inclusion at Morgan Ryder Associates are critical to our success as DE&I positive company, so we want to recruit, develop, and keep the best talent. We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic. #J-18808-Ljbffr

Location: Nuneaton - Office & Site Based Salary: Up to £65,000 + Car/Car Allowance + Bonus Yolk Recruitment is supporting an established specialist engineering business with the recruitment of an HVAC Project Engineer to manage technically complex installation projects across the West Midlands of the UK. This is an excellent opportunity for someone with strong HVAC, refrigeration or building-services engineering knowledge who enjoys combining technical problem-solving with end-to-end project delivery and customer interaction. You'll take ownership of projects from design and planning through installation, commissioning and handover, coordinating engineers and subcontractors while acting as a key technical point of contact for customers. The role will combine office-based project work with regular customer and project-site activity, so would suit someone who enjoys being close to both the technical detail and physical delivery of projects. The client's original brief specifically covers projects from design through commissioning and follow-up. • Manage HVAC installation projects from initial design and planning through to commissioning, handover and follow-up., • Develop project programmes, schedules, timelines and deliverables in line with customer requirements., • Work closely with Design and Engineering teams to ensure proposed HVAC installations meet technical, regulatory and customer requirements., • Coordinate internal technicians, installation teams, subcontractors and other trades throughout project delivery., • Select and manage subcontractors, including commercial negotiation, performance, quality and compliance., • Attend customer and project sites to monitor progress, inspect installation quality and resolve technical or operational issues., • Act as a key liaison between customers, engineers, architects, subcontractors and installation teams, providing clear project updates throughout delivery., • Manage project budgets, labour, materials and subcontractor costs while identifying opportunities to control expenditure without compromising quality., • Identify additional works or changes to project scope and ensure these are commercially agreed with customers before work progresses., • Identify potential project risks including delays, resource constraints, technical issues and unexpected site conditions, developing appropriate solutions and mitigation plans., • Manage project changes, technical discrepancies and installation issues through to resolution., • Ensure installations meet relevant HVAC, safety, quality and energy-efficiency requirements., • Maintain accurate project documentation including schedules, contracts, change orders, inspection records and progress reports., • Manage project completion and handover, ensuring customer requirements have been met and maintaining a high level of client satisfaction., • Strong technical experience within HVAC, refrigeration, air conditioning or closely related building-services engineering., • Previous experience delivering or managing HVAC installation projects, ideally from design/planning through installation and commissioning., • Mechanical Engineering, HVAC or related qualifications would be beneficial; alternatively, strong vocational HVAC training combined with relevant project experience will be considered., • Experience coordinating engineers, technicians, subcontractors and multiple trades., • Strong customer-facing skills with the confidence to discuss technical requirements, project progress and challenges directly with clients., • Commercial awareness, with experience managing project budgets, costs, variations and subcontractor expenditure., • Ability to interpret technical requirements and work effectively with Design and Engineering teams to develop practical installation solutions., • Experience using project-management tools and producing project programmes/Gantt charts., • MS Project, AutoCAD or BIM experience would be advantageous., • Full UK driving licence and flexibility to travel to customer/project sites, including occasional overnight stays where required., • Salary up to £65,000 depending on experience, • Annual performance-related bonus, • Company car or car allowance (Your choice), • 37-hour working week, • 25 days annual leave plus Bank Holidays, • Employer pension contribution of 5%, • Private medical cover, • Enhanced maternity and paternity leave, • Employee Assistance Programme, • Company laptop and mobile phone, • Company events, • Varied working environment combining office, customer and project-site activity This is a strong opportunity for an experienced HVAC Project Engineer or Project Manager looking to take ownership of technically interesting installation projects while retaining direct involvement with customers, engineers and project sites. Please note: Due to high application volumes, we can't respond to every applicant. If you haven't heard from us within 7 days, unfortunately you've not been successful on this occasion. Please check our website for other opportunities. #J-18808-Ljbffr

Cooltherm are seeking an experienced and driven HVAC Project Manager to join our team. This role is ideal for a motivated professional with a strong background in mechanical or HVAC engineering who can take ownership of projects from initial design through to commissioning and handover. As Project Manager, you will oversee the full lifecycle of HVAC installations, ensuring projects are delivered on time, within budget, and to the highest quality and safety standards. Nuneaton • Project Planning & Execution, • Joins, develops and oversees the entire HVAC project, from design stage to commissioning and follow up., • Prepare project schedules, timelines, and deliverables, ensuring they align with client requirements., • Collaborate with design and engineering teams to ensure installation plans meet technical and regulatory standards., • Team & Subcontractor Management, • Supervise and coordinate installation teams, whether subcontractors or in-house technicians., • Evaluate and select subcontractors, negotiating contracts and ensuring compliance with agreed terms., • Monitor the performance of subcontractors and team members to maintain project quality and efficiency., • Quality Assurance & Compliance, • Ensure installations meet German and EU HVAC standards, including DIN norms and energy efficiency regulations., • Conduct site inspections to monitor the quality of work, safety compliance, and adherence to project specifications., • Address any discrepancies in design or installation with corrective measures., • Budget & Cost Management, • Prepare and control project budgets, ensuring efficient allocation of resources., • Identify cost‑saving opportunities while maintaining project quality., • Approve expenses related to materials, subcontractor fees, and labour costs., • Raise cost walk ins for additional work prior to execution to the customers, • Stakeholder Communication, • Act as the liaison between clients, architects, engineers, and installation teams., • Provide regular progress updates to clients and resolve any issues or changes promptly., • Manage handover processes, ensuring client satisfaction during project completion., • Problem‑Solving & Risk Management, • Identify potential risks (e.g., delays, resource shortages) and develop mitigation plans., • Resolve on‑site challenges such as technical issues or unexpected site conditions., • Documentation & Reporting, • Maintain detailed project documentation, including contracts, change orders, schedules, and inspection reports., • Prepare and deliver regular status reports to internal and external stakeholders., • Degree in Mechanical Engineering, HVAC Technology, or a related field., • Alternatively, a combination of vocational training in HVAC and extensive project management experience, certified technician, • Understanding of installation requirements of all HVAC systems., • Good communication skills. Good IT Skills/Competent with Microsoft office., • Communicate with Senior management about scheduling, staffing and technical requirements., • Working as part of a team., • Good personal timekeeping., • Site management (SMSTS/SSSTS/NEBOSH or equivalent), • Competent with AutoCAD or Similar GDPR Notice: Data submitted on this e-form will be securely passed onto our teams for response. Please see our GDPR policy for more information. #J-18808-Ljbffr

Adecco Group UK & Ireland is seeking a QHSE Manager to lead Quality, Health, Safety & Environmental performance within a growing aerospace, defence and engineering manufacturing environment in Nuneaton. Reporting to the General Manager, this senior, hands-on role combines QMS ownership with a visible shop floor presence, driving compliance, continuous improvement and safety across machining, inspection, assembly and supply chain teams. #J-18808-Ljbffr

Quality Inspector Location: Stourport-on-Severn Salary: Up to £40k Job Type: Full Time, Permanent The Role – Quality Inspector Reporting to the Production Quality Team Leader, you will be responsible for ensuring products and assemblies meet the highest quality standards throughout the manufacturing process. Working closely with Production, Engineering and Quality teams, you will carry out inspections, manage non-conformances, support continuous improvement activities and help maintain compliance with aerospace and defence quality requirements. Key Responsibilities – Quality Inspector Inspect parts and assemblies against engineering drawings and process specifications. Conduct manual inspections using measuring equipment including micrometres, height gauges and shadowgraphs. Raise non-conformance reports and support investigations into quality issues. Generate and maintain FAIR documentation. Carry out operator compliance checks and process audits. Manage inspection workload to support production schedules. Requirements – Quality Inspector Previous quality inspection experience within a manufacturing or engineering environment. Ability to read and interpret engineering drawings and GD&T. Experience generating and completing FAIR documentation. CMM experience would be advantageous. If you like the look of this Quality Inspector role, then click and apply or contact us for further information. Todd McGreevy 01296 737313 INDMID "Thank you for your application. Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days please assume your application has been unsuccessful. To see our other available vacancies please visit our website." TPBN1_UKTJ

Overall Job Purpose As a Piling Operative, you will be responsible for supporting all aspects of piling operations on site. Where plant, machinery or equipment is operated, this must always be carried out safely and in full accordance with the manufacturer's instructions, site procedures and approved documentation. Main Responsibilities and Duties Maintain Controlled Exclusion Zones in accordance with the approved RAMS and Lift Plans. Assist in ensuring that the quality of all constructed works meets the agreed specification. Where potential non-conformances are identified, report these immediately to the Works Supervisor. Carry out any other reasonable duties, tasks or work activities as directed by management. Assist with the safe rigging and setup of piling equipment. Provide support to other team members as reasonably required and instructed by management. Ensure piling operations are carried out efficiently by maintaining an adequate supply of the correct materials, tools and equipment within the work area. Act as the nominated Banksman for plant and equipment movements when required. Ensure piles are installed within the specified tolerances and in accordance with the project requirements. Maintain a zero-tolerance approach to unsafe working practices, behaviours, conditions or defective plant and equipment. Accurately report hazards, near misses and other safety concerns at the earliest opportunity. Maintain a professional and positive Company image when dealing with clients, colleagues, contractors and other stakeholders. Ensure the correct Personal Protective Equipment (PPE) is worn at all times. Understand and ensure that all works are undertaken strictly in accordance with the approved project-specific Method Statements, Task Sheets, Risk Assessments, Lift Plans, Inspection and Test Plans and Drawings. Check all plant and equipment delivered from the Yard to ensure it is correct, in good working condition and fit for purpose. Any deficiencies or defects must be reported immediately to the Works Supervisor. Ensure all plant and equipment is returned to the Yard clean, in good condition, with any defects reported, and with oil and fuel levels maintained in accordance with the relevant hire conditions. Ensure all plant is fully refuelled before off-hire or collection. Assist with major servicing and repair activities as required. Concrete Pump Operators – Where Applicable Check all concrete pumping plant and associated equipment delivered from the Depot to ensure it is correct, in good condition and fit for use. Immediately report any deficiencies or defects to the Site Foreman. Set up rigid and flexible concrete lines safely, ensuring whipchecks and concrete clamp pins are correctly fitted. Ensure all concrete lines are adequately protected from site traffic and other potential sources of damage. Prepare Primapump and manage its application in accordance with the required procedures. Safely marshal concrete delivery wagons in and around the concrete pumping setup. Verify that each concrete delivery supplied for use is the correct mix for the specified works. Take and test concrete samples in accordance with the relevant British Standards, including slump, flow and temperature testing where required. Maintain accurate and contemporaneous field records. Only accept concrete that falls within the specified project tolerances. Identify and report any non-conforming concrete to Site Management and await further instruction before the concrete is used or disposed of. Sample, make and cure concrete cubes in accordance with the relevant British Standards where required. Maintain accurate and contemporaneous records to ensure full traceability and ensure cube storage facilities are suitable, serviceable and properly maintained. Ensure the quality of the completed works meets the agreed specification. Immediately report any potential non-conformances to the Works Supervisor. Operate the concrete pump, static mixer drum and concrete lines within their specified operating limits and strictly in accordance with the manufacturer's instructions. Never operate machinery or concrete lines where safety guards or safety devices are defective, disconnected or bypassed. Regularly inspect concrete lines for signs of damage or deterioration and report any issues to the Works Supervisor. Understand and follow all approved safe systems and procedures for blowing out concrete lines. Complete regular daily inspections and maintenance of the concrete pump, static mixer drum, concrete lines and associated ancillary plant. Maintain appropriate records and report any defects to the Site Foreman. Keep the working area clean, tidy and organised, with suitable arrangements for the storage of fluids, oils, greases, Primapump and concreting fittings. Maintain plant in good visual condition and prevent concrete from accumulating in hoppers, concrete drums, beneath pumps or around stabilisers. Company Responsibilities and Duties Adhere personally and as part of the wider team to established working practices, methods and procedures. Complete all relevant training and development activities and maintain a positive and adaptable approach to new or alternative systems and processes. Take a proactive approach to Health, Safety and Environmental matters and work cooperatively with the Company's HSEQ Manager to comply with all relevant Health, Safety and Environmental legislation, policies and procedures. Maintain confidentiality and comply with data protection requirements and associated Company guidelines where applicable. Desired Skills, Experience and Qualifications Good knowledge of construction practices and relevant site experience. Valid CSCS Card. Passport to Safety. CSCS Slinger Signaller qualification. MEWP qualification. CPCS Trailer Mounted Concrete Pump qualification. Hours and Working Environment Working hours: 7:30am to 6:00pm . Minimum of 50 hours per week . Due to the nature of the role and the requirements of site operations, employees are expected to demonstrate flexibility and cooperate with working outside their normal hours where reasonably required to meet changing workloads, operational requirements and site conditions. TPBN1_UKTJ

Machining complex and high-value components Producing one-off and low-volume precision-engineered parts Reading and interpreting detailed engineering drawings Selecting appropriate tooling, speeds, feeds and machining strategies Carrying out in-process inspection and maintaining high quality standar

Location: Coventry Commutable from: Coventry, Kenilworth, Warwick, Leamington Spa, Rugby and surrounding areas Salary: £50,000 - £65,000 (DOE) Working hours: Full-time, permanent About the Company Our client is a growing engineering and manufacturing organisation specialising in precision CNC machined components. Supporting customers across demanding sectors, they combine advanced machining, fabrication and engineering capability with a strong focus on quality and delivery. About the Role An opportunity has arisen for an experienced CNC Estimator to join a busy and expanding manufacturing business. You will be responsible for interpreting customer requirements, developing accurate and commercially competitive quotations, and working closely with programming, manufacturing and operations teams to establish the most efficient production route. Once an order is secured, you will stay involved through to delivery, coordinating internal teams, monitoring cost and lead time, and acting as a key point of contact for the customer. Key Responsibilities Review and interpret customer RFQs, drawings, specifications and technical requirements. Produce detailed and accurate cost estimates for CNC machined parts and assemblies. Build costings covering material, set-up and cycle times, programming, tooling, fixtures, inspection and subcontract operations. Work with programmers, manufacturing engineers and operations to establish machining strategies, routes and times. Obtain and assess supplier and subcontractor quotations (e.g. heat treatment, surface finishing, NDT) and lead times. Liaise with customers to clarify requirements and support the quotation process. Ensure quotations are competitive while protecting margin and allowing for manufacturing risk. Following order win, manage the project through to delivery, coordinating Production, Quality, Procurement and Planning to keep jobs on track. Monitor cost, timescales and risks, and manage changes to scope or schedule with customers and internal stakeholders. Support continuous improvement of estimating, costing and project management processes. About You You will ideally have: Proven experience estimating for CNC machined components (milling, turning and/or multi-axis). A strong understanding of machining processes, materials, tooling and achievable cycle times. Experience reading and interpreting engineering drawings, tolerances and specifications. Experience taking orders from quotation through to delivery, including customer communication and progress tracking. Strong commercial awareness and an understanding of costs and margins. Strong Microsoft Excel and general IT skills; ERP or costing system experience is an advantage. Excellent communication skills with customers, suppliers and internal teams. A practical, hands-on approach and the ability to manage multiple quotes and projects at once. Desirable Experience in aerospace or another regulated or high-precision sector. Programming (CAM) or shop-floor machining background. How to Apply To apply for the Estimator - CNC Machining position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps. INDENG

UMB The role: The role of the Quality Inspector III is to undertake inspections of the product during Build in accordance with the relevant inspection and test plans Competent Quality professional capable of managing own tasks, delivering results and providing coaching and mentoring to junior member

Seeking a Quality Engineer with hydraulics/supplier inspection experience, offering full training to become a Quality Manager with international travel opportunities.

Become a food delivery driver with Deliveroo and find work that suits you.Make money on your own schedule with your own vehicle (scooter, bike or car).Work when you want to, at the tap of a button.Scooter, bike or car (with license and insurance).Smartphone with iOS 12 / Android 6 or above.Proof of

Our clubs are built on high-quality facilities, exceptional service and an environment where people can train with confidence. We're committed to creating high-quality fitness environments for our members and providing opportunities for our colleagues to grow, develop and build rewarding careers.

High attention to detail and a commitment to quality.

Holidays Cottage Cleaner - Veryan.We are looking for 2 Holidays Cottage Cleaners to clean and prepare our stunning holiday cottages in Veryan and Porth (just outside Portscatho).This role is based on annualised hours, where the amount of hours you work each month may vary, however your salary will b

Do you have a passion for delivering excellence? Do you take pride in your work? Do you have excellent attention to detail? If yes, we would like to hear from you!.Join us as a Specialist Cleaner in our Stockport Club offering a 7.Hour contract working 3 mornings per week, including weekend availab

Cleaner - The Cottage - Coventry, West Midlands.Cleaner at The Cottage located in Earlsdon near Coventry A neighbourhood hangout with a glorious beer garden serving up seriously tasty beers and a selection of delicious cocktails.Our gorgeous wood-fired oven, cooks all our pizzas and pots from fresh

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Earn £50K–&po

Van rental £110 a week, the lowest in the market.Self-employed delivery driver, Exeter.We are hiring self-employed multi-drop delivery drivers at our Exeter depot.Work is available all year round, you get paid every week, and you can be on the road within days.You do not need delivery experience.We

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Earn £50K–&po

Responsibilities Lead electrical installation teams on Commercial Solar PV projects Oversee containment, cabling, termination, testing and commissioning Coordinate with mechanical installation teams Carry out quality checks and resolve installation issues Manage daily workload and site resources Men

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Earn £50K–&po

Description Want to drive your career forward at a company where you're truly valued? Then we'd love you to join us at poltronesofà as a 7.You'll be part of a supportive team dedicated to bringing smiles to customers' faces, not just furniture to their door.In a career that rewards hard work with g

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Earn £50K–&po

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Our top couriers are smashing it.

This role involves working on a fresh production line, ensuring high standards of quality and efficiency in a fast-paced environment. GBP hourly Essential requirements for Production Operative: Must have own transport Full-time availability only (no student visas) * Medium level of English profi

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! If you have access to a long wheelbase van, now is the perfect time to get on the road.Enjoy consistent work, competitive pay a

About the Role: Quality check parts at each stage of the process including first offs and final inspections. Be familiar with established inspection procedures and have the capability to use inspection/testing tools and instruments, knowledge of CMM Equipment would be an advantage. Be happy to under

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! .Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Our top couriers are smashing it.

Early Morning Delivery Drivers Needed! Join News Team Group, a fast-growing company delivering newspapers and magazines to homes and businesses across the UK.We're looking for reliable, self-employed delivery drivers who are ready to hit the road and make an impact in their local community.Join a t

Commercial Electrician Coventry / Midlands Circa £40,000 per annum, depending on experience + Company Van & Equipment Permanent RETAIND Recruitment is recruiting for a Commercial Electrician to join an established facilities management services provider based in Coventry.Working across a varied com

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period!.Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Our top couriers are smashing it.St

This is a full-time role working 4 on 4 off , and the hours of work are: - 6am to 4pm Your Time at Work As a Production Operative you will be responsible for: - Packing cheese products - Working on the production line - Palletizing items - Checking quality of the products - Working in a chill te

Starting on £33,714 you will increase £1,000 each time after completing 6 and 12 months of service to £35,714 per annum Role summary: To deliver customers' products to the required premises ensuring all customers receive exceptional customer service as part of a multi-drop delivery route.The dr

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period!.Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Our top couriers are smashing it.St

Electrician (Commercial) Birmingham, West Midlands and UK-wide £18.Permanent position A well-established and successful provider of commercial property solutions, are currently looking for an experienced Electrician to join their team based in the Birmingham area.This is a full time, permanent posi

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN.Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period!.Enjoy consistent work, competitive pay and the opportunity to earn more during our busiest period.Our top couriers are smashing it.St

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN Our busiest period is approaching and we’re looking for motivated multi-drop drivers to join us for our peak period! If you have access to a long wheelbase van , now is the perfect time to get on the road.Enjoy consistent work, competitive pay

Conducting electrical inspections.

JOIN DHL E-COMMERCE AS A VAN DRIVER THIS AUTUMN Our busiest period is approaching and we're looking for motivated multi-drop drivers to join us for our peak period! If you have access to a long wheelbase van, now is the perfect time to get on the road.Enjoy consistent work, competitive pay and the o

Duties Electrical installation, maintenance and remedial works Inspection, testing and fault finding Planned and reactive maintenance across multiple sites Working on pumps, motors, control equipment and distribution systems Ensuring all work is carried out safely and in line with current regulation