Quality inspection jobs in RotherhamCreate job alerts

This is an excellent opportunity to join a growing UK engineering group specialising in high-precision mechanical and hydraulic solutions. The business is expanding with a brand-new, purpose-built workshop in Rotherham, focused on industrial gearbox overhauls and accredited rebuilds. They are seeking an experienced Workshop Engineer to play a key role in the setup and ongoing success of this new facility. Role Overview • Carry out full strip-down, inspection, diagnosis, and rebuild of large industrial reduction gearboxes, • Overhaul hydraulic pumps, motors, engines, and related mechanical components, • Work on complex, high-value assemblies requiring precision and strong technical knowledge, • Ensure all rebuild work meets required accreditation and quality standards, • Support workshop setup, workflow planning, and continuous improvement, • Contribute to a strong culture of safety, quality, and engineering excellenceRequirements, • Proven experience stripping and rebuilding industrial gearboxes (essential), • Strong background in hydraulics including pumps, motors, valves, and related systems, • Mechanical fitting/workshop engineering experience from industrial, plant, automotive, marine, or similar sectors, • Ability to work methodically and accurately on complex assemblies, • Strong work ethic, attention to detail, and good team communication skillsSalary and Benefits, • £40,000 - £45,000 per annum (DOE), • 45 hours per week, Monday to Friday 08:00-17:00, • Early finish on Fridays (around 16:00), • Occasional overtime available but not guaranteed, • Training provided on specialist gearbox systems, • Opportunity to work in a new, purpose-built accredited workshop, • Long-term career stability within an expanding engineering team

REED Engineering & Manufacturing are working with a leading Engineering & Manufacturing Company Inspector Dispatcher • Safely load and unload materials using pendant cranes, forklifts, and sideloaders., • Oversee and conduct initial inspections of incoming goods, raising documentation for any non-conforming products., • Perform final product inspection and identification prior to despatch., • Work in full compliance with TI-OP-061-LTD (Final Inspection), TI-OP-062-LTD (Handling, Storage and Delivery), and all relevant quality documentation., • Carry out material analysis using the Niton gun., • Conduct final inspection of products., • Support operations and assist with training on all saws and straightening equipment., • Actively participate in all company-driven initiatives., • Attend and contribute to meetings relevant to the role.

CNC Machinist (Milling - 3 Month Contract) Location: Sheffield Rate: £20.00 to £21.00 per hour (DOE) + overtime Contract: 3-month fixed term Start: Immediate (interviews available now)Up to £21 per hour, immediate start, and a contract where you can get straight into the work. If you are a CNC Machinist looking for a short-term role where the focus is on machining and output, this is worth a look. The work is already running, and you will be supporting production within an established setup. You will be machining precision components in an aerospace-focused environment where accuracy and consistency are key. The expectation is simple. Read the drawing, set it correctly, and produce parts to standard.What the role looks like day to day:You will be working on CNC milling machines producing components to tight tolerances, including some specialist materials.You will manage your own work, carry out inspection, and keep things running throughout your shift.What you will be doing: • Operating CNC milling machines, • Setting and running jobs, • Reading and working from engineering drawings, • Machining components to tight tolerances, • Inspecting parts using Verniers, micrometres and gauges, • Making adjustments to maintain output, • Supporting production during a busy period, • Following quality standards including AS9100 and NADCAPWhat they are looking for:, • Proven CNC machining experience, • Strong milling background, • Able to read drawings and work independently, • Confident with manual inspection equipment, • Experience working to tight tolerances, • Background in precision engineering, aerospace desirable You need to be someone who can get up to speed quickly and work without close supervision.Why take this contract: It is a straightforward role focused on supporting production. The work is already in place, and expectations are clear. You are there to contribute from day one and keep output moving.What you get:, • £20.00 to £21.00 per hour depending on experience, • Overtime available, • Immediate start, • 3-month contract with consistent work Interested? If this sounds like what you have been looking for, apply now or contact the Sheffield team on . Verus Recruitment Partners are acting as a Recruitment Agency in relation to this vacancy and are an Equal Opportunities Employer.Keywords: CNC Machinist, CNC Miller, CNC Milling, Contract CNC Machinist, CNC Setter Operator, Fanuc, Precision Engineering, Aerospace, Manufacturing Sheffield, Engineering Drawings, Machining, Inspection, Production Engineering.

Senior Officer – Electrical • Location: Sheffield, • Job Type: Full-time, Temp Day-to-day of the role: • Deliver contract administration services for various electrical installation programmes., • Implement and monitor on-site quality assurance, defect inspection, and handover procedures., • Issue site instructions and variations, and provide competent, sound technical advice., • Conduct joint inspections with Neighbourhood Officers, offering assistance and guidance on electrical maintenance and property improvements., • Advise on and assess permission requests from customers regarding changes to electrical installations., • Undertake inspections and surveys, and prepare technical and non-technical reports and designs, making recommendations and suggesting remedial actions., • Ensure effective consultation and communication with tenants, contractors, elected members, and colleagues, including liaising with emergency services and other external stakeholders., • Must hold the 18th edition IEE wiring regulations qualification., • Experience in managing contractors and liaising with various agencies., • Strong customer care skills and the ability to visit sites frequently., • Demonstrated ability to work positively, brainstorm new ideas, and inspire teamwork., • Organised and calm under pressure., • Competitive salary package., • Hybrid working model with flexibility to work on-site, in the office, or remotely., • Opportunities for professional development and training.

REED Engineering & Manufacturing are working with a leading Engineering & Manufacturing company. Job Summary As a key member of the GFM team, you will carry out crane driving, slinging tasks, and despatch operations within the department. This role supports both the Forge and Heat Treatment areas and requires a strong commitment to safety, quality, and teamwork. Main Duties & Responsibilities • Operate overhead (cab) cranes in the GFM Forge and Heat Treatment departments., • Operate pendant/remote-controlled cranes across GFM areas., • Perform slinging duties to support forging and heat treatment processes., • Maintain high standards of housekeeping within all work areas., • Load and unload materials using cranes and forklift trucks., • Manage despatch processes, ensuring accurate completion of all relevant paperwork., • Conduct receipt inspections of incoming materials and complete inspection documentation for subcontracted work., • Enter operational and material data into the internal computer system., • Assist in heat treatment operations as required., • Carry out pre-shift crane checks.

Reed Engineering are working with a leading Metals Engineering & Manufacturing company with a global research. The Role We are looking for a motivated and hands-on Product and Process Technologist to take ownership of the development, optimisation and commercialisation of new and existing processes within the business. This is a shop-floor connected technical role combining process development, quality systems ownership, NDT oversight and close collaboration with operators, management, customers and research partners. You will play a key role in maintaining business continuity while driving innovation and growth into new and emerging markets. Key Responsibilities • Lead the development, optimisation and review of production and inspection processes, including NDT, • Plan, execute and document trial work for new projects and product lines, • Working with operatives who provide chemical etching, pickling, passivating and Inspection of parts etc to use within high integrity sectors such as Aerospace, Energy, and Automotive, you will be offering technical support and process improvement for the products produced by the operatives., • Implement and maintain a trials database to capture process learning, outcomes and agreed actions, • Work closely with operators to understand current process routes and capture key variables, • Propose process and product improvements aligned to commercial strategy, with clear routes to market, • Assess market research and sales data to ensure technical developments are commercially viable, • Support cross-group collaboration within the company/group to add internal value, • Maintain and improve the documented management system, supporting ISO9001, AS9100 and NADCAP accreditation, • Line manage the NDT Technician, providing day-to-day support and developing capability and accreditations, • Ideally be degree qualified in a relevant technical discipline, or equivalent practical experience, • Working knowledge ofNon-Destructive Testing (NDT) methods would advantageous although not essential, • Experience working in or supporting Nadcap-accredited environments (desirable), • Strong analytical and problem-solving skills with a practical, hands-on approach, • Confident communicator, able to engage effectively with operators, management and customers, • Highly organised, able to manage multiple projects simultaneously, • Competent IT user (MS Word, Excel, PowerPoint, Outlook) Candidates from a process metallurgical, materials, forensic metallurgy or chemical analyst/ chemistry background would be highly advantageous Why Join Us? • Be part of a well-established, respected engineering group with long-term stability, • Work on technically challenging projects supporting high-integrity industries, • Play a key role in business growth and capability development, • Enjoy a varied role combining hands-on technical work with strategic input

Quality Inspector Location: Rotherham, South Yorkshire. Salary: Up to £19.00 per hour including shift allowance (circa £37,500), plus overtime. Contract: Full-time, permanent. Shifts: 4 day week, Monday to Thursday. Rotating days (6am to 4pm) and nights (8pm to 6am).Upto £19 per hour and a 4 day week. That means a 3 day weekend, every week.If you are a Quality Inspector and your current role feels repetitive or you are being pushed to rush work out, this is worth a look. You will be joining a large manufacturing site in Rotherham working across sectors including defence, rail and heavy engineering. The work is varied, the equipment is well invested, and the expectation is simple. Do the job properly.What the role looks like day to day:This is hands-on inspection work across machined parts and fabricated assemblies. You will be working from drawings and CAD models, using your judgement to make decisions on quality. It is a structured environment where standards matter and people take pride in getting things right.What you will be doing: • Inspecting components and fabrications against engineering drawings and CAD., • Using FARO or similar measuring arms., • Working with Polyworks and standard inspection tools., • Producing clear and accurate inspection reports., • Following inspection plans set by the quality team., • Supporting calibration activities and maintaining records., • Liaising with quality engineers when required.What they are looking for:, • Experience in a quality inspection role within metal manufacturing., • Confidence using measuring arms such as FARO or Hexagon., • Experience with Polyworks., • Ability to read and understand engineering drawings., • A methodical, detail-focused approach. This role suits someone who takes pride in accuracy and consistency. If you prefer a more relaxed environment where quality can slip, it will not be the right fit.Why people move into this role:The working pattern is a big part of it. A 4 day week gives you a long weekend every week, not just occasionally. Alongside that, you are joining a stable business with consistent work, modern equipment and a strong focus on quality.What you get:, • Up to £19.00 per hour including shift allowance., • Overtime available., • 33 days holiday including bank holidays., • Company pension and life assurance., • Healthcare scheme., • Reduced gym membership., • Monthly prize draw and referral incentives., • Ongoing training and development., • Free secure on-site parking.Interested If this sounds like what you have been looking for, apply now or contact the Sheffield team on .Verus Recruitment Partners are acting as a Recruitment Agency in relation to this vacancy and are an Equal Opportunities Employer.Keywords: Quality Inspector, Engineering Inspector, Inspection Technician, Metal Manufacturing, Fabrication Inspection, Machining Inspection, Quality Control, Faro Arm, Hexagon Arm, Polyworks, Metrology, Engineering Drawings, Dimensional Inspection, Welding Inspection, Heavy Engineering, Rotherham, Sheffield, South Yorkshire

Mould Shop Inspector Rotherham Shift Pattern: Days – Monday to Friday 6am – 2pm (37 hours per week) £35,000 - £36,000 An established manufacturing organisation is seeking an experienced Mould Shop Inspector to join its technical operations team. This role plays a key part in ensuring mould tools and equipment meet quality, safety, and production standards. The Role Reporting to the Mould Shop Manager, the successful candidate will be responsible for inspecting mould equipment before, during, and after production runs, accurately recording findings, and supporting continuous improvement across inspection processes. Key Responsibilities • Inspect mould equipment for wear, damage, and compliance following production runs, • Record inspection results and equipment condition using a digital system, • Liaise with internal coordinators regarding repair and refurbishment requirements, • Inspect new mould tooling and samples prior to release into production, • Support repair and refurbishment activities with inspection guidance, • Carry out off-displacement and in-process displacement checks where applicable, • Maintain calibration and correct use of inspection equipment, • Create, update, and manage inspection documentation and data sheets, • Support colleagues with the correct use of inspection equipment, • Assist in developing and improving inspection procedures and controls, • Comply with all Health & Safety and quality standards, • Experience reading and interpreting engineering drawings, • Confident using calibrated inspection equipment (e.g. callipers, micrometres), • Good IT skills, including Microsoft Excel and Word, • Methodical, organised, and detail-focused approach to work, • Experience using CMM inspection equipment, • Familiarity with 3D models, • Background in data management within a manufacturing or engineering environment, • Professional, motivated, and results-driven, • Strong attention to detail and analytical thinking, • Able to work under pressure and meet deadlines, • Confident communicator with good interpersonal skills, • Flexible, adaptable, and open to change, • Positive “can-do” attitude with a willingness to take ownership, • Proactive in identifying and suggesting improvements, • Stable, full-time, weekday role, • Supportive working environment, • Opportunity to be involved in ongoing process improvement, • Competitive salary dependent on experience

Quality Assurance Inspector – Precision Engineering Location: Sheffield Shift Pattern: Days Ready to make an impact in quality assurance? Apply today and help drive excellence in precision manufacturing. A well-established precision engineering company is seeking a Quality Assurance Inspector to join its quality team. This is a key role ensuring that high-spec components meet strict customer and industry standards, with a focus on both manual and CMM inspection techniques. About the Role You’ll be responsible for inspecting components using both manual tools and coordinate measuring machines (CMM), ensuring compliance with customer drawings and specifications. The role also involves supporting calibration activities, documenting inspection results, and contributing to continuous improvement initiatives. Key Responsibilities • Perform manual and CMM inspection of components to customer specifications., • Conduct goods-inward inspections and first-off checks., • Support calibration of measuring equipment., • Document inspection results for FAIR and PPAP submissions., • Generate quality control notifications for non-conforming products., • Participate in 8D problem-solving and improvement activities., • Assist with day-to-day quality tasks under the guidance of the Quality Manager., • Previous experience in quality inspection., • Proficient in English (written and verbal)., • Skilled in using CMM equipment., • Strong attention to detail and accuracy., • Good planning and organisational skills., • Ability to work independently and as part of a team., • Comfortable working under pressure while maintaining quality standards., • Experience in CMM programming., • Calibration experience., • Background in engineering or aerospace industries., • Proficient in MS Word, Excel, and Outlook., • Self-motivated and deadline-driven., • Strong interpersonal and communication skills., • Process-oriented with a problem-solving mindset., • Flexible, cooperative, and enthusiastic., • Reliable and conscientious.

Welding Inspector (PCN Level 2) Location: Rotherham Salary: £17.00 per hour (circa £33,592 per annum) Contract: Full-time, permanent Hours: Monday to Thursday rotating shifts. Days 6:00am to 4:00pm, Nights 8:00pm to 6:00am4 days a week. Every Friday off. A long weekend built into every single week. If you’re currently working five days, you’ll know the difference that makes. More time at home, more time to switch off, and a better balance without losing earnings. That’s exactly what this role offers. A consistent Monday to Thursday pattern, full-time hours, and a routine that gives you your time back. In a lot of fabrication environments, inspection only happens at the end of the process. By that point, issues are harder to resolve and quality can suffer, leaving inspectors picking up problems rather than preventing them. This role is different. You will be involved throughout the fabrication process, helping maintain standards as work moves through production rather than checking it after the fact. It gives you more control over quality and a more hands-on role in the process. The work is consistent, expectations are clear, and you are there to maintain standards rather than firefight problems. You will be working in a large, well-established manufacturing facility in Rotherham, supporting fabrication across sectors including defence, rail and heavy engineering. This suits someone who wants a stable role, clear expectations and the ability to take ownership of quality.What the role looks like day to day: You will be on the shop floor and in the documentation, checking weld quality, reviewing procedures and supporting fabrication teams to keep everything to standard.What you will be doing: • Monitoring QA and QC activities across fabrication, • Reviewing WPS, PQR and WPQ documentation, • Carrying out visual weld inspections and dimensional checks, • Reviewing and endorsing NDT reports, • Supporting welding teams with technical advice, • Prescribing and monitoring weld repairs, • Verifying correct use of NDT methods, • Completing inspection records and documentation, • Reviewing inspection and test plans and final fabrication packsWhat they are looking for:, • PCN Welding Inspector Level 2 or equivalent is essential, • PCN Level 2 MPI/DPI is preferred, • Experience in welding inspection within fabrication, • Understanding of QA and QC processes, • Comfortable working on the shop floor and with documentation, • Good communication skills and attention to detail, • IT literate including Microsoft Office You’ll be comfortable taking responsibility for quality and working without constant supervision.What you get:, • £17.00 per hour, • 4-day working week with a long weekend every week as standard, • 33 days holiday including bank holidays, • Company pension, • Life assurance, • Healthcare plan, • Free on-site parking, • Reduced gym and Costco membership, • Referral bonus scheme, • Ongoing training and development For more information, please get in touch with our Sheffield Team on . Verus Recruitment Partners are acting as a Recruitment Agency in relation to this vacancy and are an Equal Opportunities Employer.Keywords: Welding Inspector, Weld Inspector, PCN Level 2, NDT, MPI, DPI, Fabrication Inspection, QA QC, Welding Inspection Jobs, Manufacturing Rotherham, Quality Inspector

Welding Inspector (Weekend Shift, 3 Day Week – PCN Level 2) Location: Rotherham Salary: £17.51 per hour (circa £31,412.94 per annum based on 34.5 hours) Contract: Full-time, permanent Hours: Friday to Sunday, 6:00am to 6:00pmMost people still work five days.This role doesn’t. You work Friday to Sunday, then you’re off for four full days before starting again. If you’re used to a full working week, this is just a different way of structuring it. Same type of work, just with more time away from it. In most fabrication environments, inspection only happens at the end of the process. By that point, issues are harder to resolve and quality can suffer, leaving inspectors picking up problems rather than preventing them. This role is different. You will be involved throughout the fabrication process, helping maintain standards as work moves through production rather than checking it after the fact. The work is consistent, expectations are clear, and you’re there to maintain standards rather than firefight problems. You will be working in a large, well-established manufacturing facility in Rotherham, supporting fabrication across sectors including defence, rail and heavy engineering.What the role looks like day to day: You will be on the shop floor and in the documentation, checking weld quality, reviewing procedures and supporting fabrication teams to keep everything to standard.What you will be doing: • Monitoring QA and QC activities across fabrication, • Reviewing WPS, PQR and WPQ documentation, • Carrying out visual weld inspections and dimensional checks, • Reviewing and endorsing NDT reports, • Supporting welding teams with technical advice, • Prescribing and monitoring weld repairs, • Verifying correct use of NDT methods, • Completing inspection records and documentation, • Reviewing inspection and test plans and final fabrication packsWhat they are looking for:, • PCN Welding Inspector Level 2 or equivalent is essential, • PCN Level 2 MPI or DPI is preferred, • Experience in welding inspection within fabrication, • Understanding of QA and QC processes, • Comfortable working on the shop floor and with documentation, • Good communication skills and attention to detail, • IT literate including Microsoft Office You will be comfortable taking responsibility for quality and working without constant supervision.What you get:, • £17.51 per hour, • 3-day working week with 4 days off every week, • 33 days holiday including bank holidays, • Company pension, • Life assurance, • Healthcare plan, • Free on-site parking, • Reduced gym and Costco membership, • Referral bonus scheme, • Ongoing training and development For more information, please get in touch with our Sheffield Team on . Verus Recruitment Partners are acting as a Recruitment Agency in relation to this vacancy and are an Equal Opportunities Employer. Keywords: Welding Inspector, Weld Inspector, NDT Inspector, PCN Level 2, MPI, DPI, Fabrication Inspection, QA QC, Manufacturing Rotherham, Weekend Jobs, Engineering Inspection

Forde Recruitment, the leading provider of engineering staff within South Yorkshire, are currently seeking an experienced, ideally CNC Machinist. KEY RESPONSIBILITIES: Visual inspection of components. Work from P-Techs and Work instructions Recording of results on Microsoft Excel. Use of callipers and Verniers for measuring purposes Rejection of batches if they dont meet quality expectations. Load p... ZIPC1_UKTJ

We are recruiting for an innovative, R&D focussed manufacturer, looking for a driven and ambitious Mechanical Fitter. This high technology business are developing new mechanical and electrical technologies and are an export success story About the Role Core Skills • Excellent practical mechanical fitting skills (additional electrical skills beneficial), • Ability to interpret engineering drawings and instructions, • Ability to operate manual machine tools preferred but not mandatory, • IT skills (MS Office – Outlook, Teams, Word, Excel as a minimum), • Ability to work as part of a team, • Excellent communication and problem-solving skills Responsibilities • Machine builds; materials delivery to ready-for-test stage from engineering drawings, • Small-batch production - builds, fitting, and assembly, • Prototype builds, • Build readiness – supporting design for manufacture, build processes, quality and safety, • Control of build quality – inspection of dimensions and characteristics, • Development and recording of manufacturing knowledge to support continuous improvement, • Support of Stores function (control of incoming materials and production orders), • Recording of day-to-day activities – route cards and time sheets, • General maintenance tasks for an efficient, safe and clean workshop environment Qualifications • BTEC Level 3 or equivalent, • Experience of prototyping, • Experience of small batch manufacturing/production environment, • Involvement in the manufacture of electrical or rotating machines is desirable, • Experience of lean manufacturing environment is desirable, • Experience of winding/impregnation/assembly of high strength magnets is desirable Required Skills • Excellent practical mechanical fitting skills, • Ability to interpret engineering drawings and instructions, • Ability to operate manual machine tools preferred but not mandatory, • IT skills (MS Office – Outlook, Teams, Word, Excel as a minimum), • Ability to work as part of a team, • Excellent communication and problem-solving skills Preferred Skills • Additional electrical skills beneficial, • Experience of prototyping, • Involvement in the manufacture of electrical or rotating machines, • Experience of lean manufacturing environment, • Experience of winding/impregnation/assembly of high strength magnets Pay range and compensation package General information • Working hours (35 hour week): 7.30am-4pm Monday to Thursday, 7.30am to 11.30am Friday, • Company pension, 25 days paid holiday plus bank holidays, EV Scheme, Cycle to Work, company pension, private healthcare and banked hours schemes

Why Join Cotecna? Cotecna is a global leader in testing, inspection, and certification, operating in over 100 countries and enabling trade, compliance, and safety across complex international supply chains. The company is known for combining deep technical expertise with innovative digital solutions, helping governments and businesses operate with trust and transparency. Joining Cotecna means becoming part of a mission‑driven organization that values accountability, open communication, and making things happen. You’ll work with diverse teams across the world and play a pivotal role in strengthening the quality foundations that support Cotecna’s growth. About the Role As Head of Quality, reporting to the Chief Compliance Officer, you will lead Cotecna’s global quality strategy, ensuring the organization maintains the management systems, certifications, and accreditations that underpin its credibility and growth. You will drive continuous improvement, strengthen operational excellence, and embed quality culture across all business lines and regions. This is a high‑impact leadership role with global visibility and influence. Key Responsibilities Group Certifications & Accreditations • Lead and manage Cotecna’s ISO 9001 group certification and ISO 17020 group accreditation, including coordination with certification and accreditation bodies., • Ensure successful planning, execution, reporting, and closure of all ISO 17020 internal audits across the network., • Maintain and support additional accreditations such as ISO 17065 and FSC Chain of Custody. Quality Governance & Frameworks • Own and evolve the Cotecna Business Framework, ensuring its principles are understood and applied consistently across the organization., • Oversee the documentation architecture supporting the framework and validate its quality and alignment. Operational Quality Leadership • Provide expert support to Cotecna entities on ISO 9001, ISO 17020, ISO 17025, ISO 17065, and other management systems., • Support business lines in achieving new certifications and accreditations required for strategic growth., • Act as Quality Manager for Geneva HQ, ensuring internal audits, corrective actions, and management reviews are effectively executed. Internal Audit & Technical Governance • Contribute to global internal audit planning and technical governance audits., • Ensure non‑conformities and corrective actions are systematically followed up and closed. Sustainability & Chain of Custody • Oversee development and monitoring of sustainability KPIs related to environmental impact and supplier performance., • Serve as the FSC Management System Manager, responsible for establishing and maintaining the FSC Chain of Custody certification system. What You Bring Qualifications & Experience • University degree or minimum 5 years’ experience in quality management., • IRCA ISO 9001 QMS Lead Auditor certification preferred., • Strong knowledge of ISO 9001, ISO 17020, ISO 17065 (mandatory)., • Experience with ISO 17021, ISO 17025, or FSC Chain of Custody is an advantage., • Background in certification activities (management systems, product certification, etc.) is desirable. Skills & Competencies • Strong analytical mindset with excellent follow‑through., • Ability to work under pressure and adapt to changing priorities., • Excellent communication skills in English; French or Spanish is a plus., • Ability to engage effectively with all organizational levels, from operational teams to the CEO., • Project management capability., • Leadership competencies aligned with Cotecna’s values: Drives Results, Customer Focus, Collaboration, Business Insight, and Situational Adaptability.

Head of Manufacturing Sheffield Competitive salary and benefits package. Elevation Recruitment Group are retained by Radius Aerospace to recruit a Head of Manufacturing for their Sheffield operation. This is a senior leadership position within a growing aerospace manufacturing business supplying complex fabricated components and assemblies into global commercial aviation, military and industrial markets. The Head of Manufacturing role offers the chance to take ownership of a large-scale manufacturing operation with real autonomy and influence. Sitting on the Senior Leadership Team, you will lead manufacturing performance across the site while driving improvements in quality, delivery, productivity and culture. Radius Aerospace is investing, growing and evolving. With a strong order book, expanding revenues and a technically advanced manufacturing environment, the Head of Manufacturing will play a key role in shaping the next phase of the operation. Why join Radius Aerospace? • Senior leadership position with genuine influence across the business, • Opportunity to shape culture and operational direction, • A technically advanced manufacturing environment supplying globally recognised aerospace programmes, • A business with strong commercial momentum and long-term growth plans, • The chance to make a visible impact across manufacturing performance, people development and continuous improvement The business Radius Aerospace has been at the forefront of aerospace fabrication for more than 50 years and operates across multiple facilities in the UK and US. The Sheffield site employs around 250 people and manufactures technically complex fabricated components and assemblies using specialist processes including titanium hot forming, super plastic forming, chemical milling, specialty alloy welding and complex assembly. The business operates in a highly regulated environment where quality, compliance and operational performance are critical. They are looking for a Head of Manufacturing who can lead from the front, develop capability across the operation and help drive the business through its next stage of growth. The role The Head of Manufacturing will hold full responsibility for manufacturing and production performance across the site. Key responsibilities include: • Leading Manufacturing, Operations Managers and Business Unit Managers across the operation, • Driving improvements in on time delivery, productivity, scrap reduction and cost control, • Championing Lean manufacturing and continuous improvement activity across the shop floor, • Ensuring compliance with aerospace standards including AS9100, • Supporting new product introduction and operational readiness for new processes, • Building a strong safety culture with clear accountability and visible leadership, • Working closely with Quality and Engineering teams to improve process robustness and inspection standards, • Supporting succession planning, leadership development and skills growth across manufacturing teams, • Ensuring maintenance strategies support operational uptime and performance The person To be considered for the Head of Manufacturing role, you must be able to demonstrate: • Significant experience in a senior manufacturing or operations leadership role, • A background within aerospace manufacturing, • Strong knowledge of regulated manufacturing standards and compliance requirements, • Proven experience implementing and sustaining Lean and Continuous Improvement programmes, • The ability to lead strategically while remaining visible and hands on when required, • Experience leading large operational teams through change and performance improvement, • Strong people leadership skills with the ability to coach, challenge and develop teams, • Engineering or Manufacturing qualifications would be beneficial, although experience will carry equal weight, • The successful Head of Manufacturing will be someone who enjoys building high-performing teams, improving operational performance and leaving a lasting mark on a business. About Elevation Recruitment Group Elevation Recruitment Group is a specialist recruitment consultancy that helps people build long-term, successful careers. We work across a wide range of industries and disciplines with a focus on making recruitment feel more human, more honest and more effective. We are specialists in every function and experts in every hire. Check out our website to find out more. Please note: This role is being handled exclusively by Elevation Recruitment Group. Any third party CVs submitted directly to Radius Aerospace will be forwarded to us as part of the recruitment process.

⚡ Electrical Engineer – CMD Ltd 📍 Location: Rotherham, UK 📁 Department: CMD / Technical 💰 Salary: Competitive + Bonus 🕒 Employment Type: Full-time | Permanent 🩺 Benefits: Health insurance, pension plan, SIPS, staff discounts & more CMD Ltd (part of the Luceco Group) is looking for an experienced Electrical Engineer to support the safe, reliable and efficient operation of electrical systems across our Rotherham manufacturing site. This is a hands‑on engineering role with real impact on production continuity, electrical safety and compliance in a live manufacturing environment. 🔧 The Role You’ll play a critical part in keeping production running smoothly by combining planned preventative maintenance, responsive fault‑finding and continuous improvement activity across plant and machinery. Working closely with production, engineering and maintenance teams, you’ll ensure electrical systems are safe, compliant and reliable — reducing downtime and supporting long‑term performance. ✅ What You’ll Be Doing • Carrying out PPM on electrical systems and production equipment, • Diagnosing and repairing electrical faults on machinery, plant and control systems, • Maintaining and troubleshooting motors, drives, sensors, control panels and distribution systems, • Supporting PLC‑controlled and automated equipment, • Responding quickly to breakdowns to minimise production disruption, • Inspecting and testing electrical installations to BS 7671 (18th Edition), • Supporting installation, commissioning and upgrades of electrical systems, • Ensuring compliance with Electricity at Work Regulations 1989 and site procedures, • Maintaining accurate maintenance records and compliance documentation, • Identifying and implementing continuous improvement opportunities, • Liaising with production teams, engineers, contractors and suppliers, • Supporting product development and reviewing wiring diagrams and technical documentation 🎯 What You’ll Be Accountable For • Reliable electrical operation with minimal unplanned downtime, • Full regulatory and safety compliance across all electrical work, • Effective, sustainable resolution of electrical faults, • Continuous improvement in asset reliability and efficiency, • Acting as a trusted technical expert within the business 👤 What We’re Looking For You’ll be an experienced Electrical Engineer from an industrial or manufacturing background, comfortable working in a live production environment. Essential: • Electrical qualification (NVQ Level 3, HNC, HND or equivalent), • Experience in electrical maintenance within manufacturing or industrial settings, • Strong electrical fault‑finding and diagnostic skills, • 18th Edition Wiring Regulations (BS 7671), • Strong safety awareness and regulatory knowledge, • Flexible approach to working hours (including out‑of‑hours when required), • PLC diagnostics and basic programming experience, • Inspection & Testing qualification (e.g. City & Guilds 2391), • Experience with automation, drives and control systems, • Familiarity with CAD or electrical design software 🎁 What We Offer • Competitive salary + bonus, • Pension, health insurance, SIPS & staff discounts, • Stable, established manufacturing environment, • Varied, technically interesting work, • Supportive engineering and production teams, • Opportunity to contribute to continuous improvement and equipment upgrades, • Part of a growing, well‑respected group (Luceco Group) 👉 Apply now to join CMD Ltd and play a key role in supporting high‑quality, compliant manufacturing operations.

Futures are currently recruiting for an experienced QC Inspector to join a well-established and highly respected manufacturing business based in Sheffield. This is an excellent opportunity to join an employee-owned organisation with a strong reputation for delivering high-integrity process plant equipment to global industry standards.\n\nThe successful candidate will play a key role within the quality department, ensuring all manufactured equipment meets strict quality, safety, and client specifications throughout the production process.\n\nKey Responsibilities\n\nConduct goods-in, in-process, and final inspections of fabricated equipment and components.\nInterpret and work from engineering drawings, material schedules, and quality plans.\nCarry out dimensional inspections using measuring equipment including micrometres, verniers, tapes, and Faro Arm technology (training provided if required).\nReview and approve material certification documentation in line with company procedures.\nProduce accurate QC and dimensional inspection reports.\nSupport equipment calibration activities and maintain inspection records.\nWork closely with production and engineering teams to ensure quality standards are maintained throughout manufacture.\nEnsure compliance with all company Health & Safety and Quality Management procedures.\nThe Ideal Candidate\n\nPrevious experience within a manufacturing or fabrication inspection environment.\nAbility to read and understand engineering drawings and technical documentation.\nGeneral understanding of pressure vessels, heat exchangers, or similar process equipment manufacturing.\nKnowledge of materials and fabrication processes.\nExperience working within ISO 9001 or similar quality management systems would be advantageous.\nStrong attention to detail and organisational skills.\nGood communication skills and ability to work under pressure.\nComputer literate with experience producing inspection documentation

CNC Machine Operator / Setter\n\nShillito Group\n\nShillito Group are recruiting for a CNC Machine Operator / Setter to join a well established manufacturing business operating a range of Fanuc-controlled CNC machinery.\n\nThis is a practical shop floor role where you'll be responsible for setting and running machines, maintaining quality standards, and keeping production moving. The business is looking for someone reliable, switched on, and comfortable working in a fast-paced manufacturing environment. Programming training can be provided for the right person looking to develop further.\n\nThe Role\n\nSetting and operating CNC machinery\nWorking with Fanuc controls\nProducing parts to drawing and quality standards\nCarrying out in-process inspection checks\nMaking offsets and minor adjustments where required\nKeeping machines running efficiently and safely\nWorking closely with production and engineering teams\nMaintaining housekeeping and quality standards\n\nShift Pattern\n\nAlternating days and nights shift pattern.\n\nDays\n\nMonday - Thursday: 7:30am - 4:00pm\nFriday: 7:30am - 1:30pm\n\nNights\n\nMonday - Thursday 6-6\n\nPay\n\nBase rates:\n\n£15.44 per hour - Days\n£17.54 per hour - NightsSalary £40,000 - £46,000\n\nOvertime available:\n\nWeekdays: 1.3x\nSaturdays: 1.5x\nSundays: 2x\n\nWhat We're Looking For\n\nCNC setting/operator experience\nExperience with Fanuc controls preferred\nReliable and able to work shifts\nGood attention to detail\nPositive attitude and willingness to learnShillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief

Renewables Electrician \nLocation: Live with 45mins travel from Sheffield\nSalary: £40,000 FTE plus a generous bonus scheme and benefits\nHours: Monday – Friday, 40 hours per week\n \nEco2Solar are pleased to announce a new and exciting opportunity to join the UKs largest and most successful Solar PV installer (who were recently invested in by EON) as a Renewables Electrician, based in Sheffield. We will help you to develop the skills to future proof your career by installing EV chargers, Solar PV systems, battery storage and innovative products for new build housing developers to meet carbon reduction targets.\n \nAbout the role \nThe role of the Renewables Electrician offers the right candidate the opportunity to build, develop and grow their career with a highly reputable and growing company. Stay ahead of the latest technology and work with the UKs largest new build solar installer, working in partnership with Eon.\n \nWorking in a safe and controlled environment, installing renewable energy systems for new build housing developers, your mission will be to achieve the highest standard of quality, safety and customer service in low carbon electrical installations.\n \nAs a Renewables Electrician, you will be responsible for the safe and efficient installation of PV systems (inverters and generation meters), accurate and timely submission of paperwork, compliance with MCS and Health, Safety and Quality standards.\n \nThis is a site-based role requiring travel on a daily basis. There will be a requirement for overnight stays as and when required.\n \nAttention to detail and problem-solving skills are essential within this role. The role requires good technological skills and the ability to use Apps to complete certifications and reports.\n \nHaving the ability to work both as part of a team and also take overall responsibility for your personal workload, whilst delivering excellent levels of service is essential. A desire to put our clients’ needs first and a thirst to develop your own skills is a key part of fitting into this established team.\n \nAbout you \nPrevious experience in solar installations and/or domestic new builds is required. It is important that you have:\n\n18th Edition electrical qualifications (BS7671) \nN/SVQ Level 3 in Electrical Installation (Building and Structures) OR a completed apprenticeship with AM2\n \nIt would be helpful but not essential if you have:\n\nSolar certification (BPEC or City & Guilds) Level 3 Award in the Installation of Small-Scale PV Systems) \nCSCS/ECS Card for site works\nTesting and Inspection 2391-52 \nExperience in 3 phase installations \n \nTo be successful in this role you’ll have strong communication skills, be reliable and a team player. You will be able to work within established timeframes and possess excellent timekeeping skills. You will be flexible in working arrangements and be driven to go the extra mile to ensure we deliver a high-quality service for our customers.\n \nWe are looking for people with integrity, passion, and a determination to make a difference for the future to join our team and be a part of our future success. If you have integrity, passion, and a determination to do everything you can to make a difference for the future then we want you on our team!\n \nWhat we offer \nYou’d be joining a highly reputable and growing company who have a real passion for sustainability, eco systems and delivering a first-class service to their customers.\n \nFinancially:\n\nYou will be entitled to a productivity bonus giving you the ability to increase your earnings\nYou will receive a loyalty bonus to say thank you from us upon completion of each full year worked\n \nAdditionally:\n\nYou will have a company van, a fuel card and tools provided\nYou will have 33 days annual leave (including Bank Holidays and an extra day for your birthday)\nYou will have access to the holiday purchase scheme\nWe offer a contributory pension scheme\nOption of a wellness benefit of £30 per month\nAll training provided\n \nStandards of Expectation, Behaviours & Values \n\nDisplays a positive, can-do attitude, turns a negative into a positive. \nFocuses on results and achievement of tasks. \nRole Model in ‘own job’, ‘leads by example’. \nLive and breathe our values every day: Excellence, Fairness, Innovation and Trust. \n \nReady to make a positive impact? \nPlease visit our website to apply for this role and help us power a sustainable future!\n \nREF-(Apply online only)

Job Title: Asbestos Surveyor\n\nLocation: Sheffield, South Yorkshire\n\nSalary/Benefits: £26k - £42k DOE + Training & Benefits\n\nWe are recruiting on behalf of a reputable asbestos company, who are seeking a hardworking and proficient Asbestos Surveyor based in Yorkshire. Candidates must have secured the BOHS P402, and will have worked within a UKAS accredited company. You must be comfortable liaising with clients in order to provide technical advice, and deliver bespoke reports. You will be travelling across a mixed-portfolio of client sites, which offers an exciting and diverse workload. This company can offer amazing benefits such as: career development and training, overtime and generous salaries.\n\nLocations that are considered: Sheffield, Rotherham, Doncaster, Barnsley, Thorne, Mexborough, Worksop, Retford, Gainsborough, Dronfield, Pontefract, Wakefield, Huddersfield, Scunthorpe, Matlock, Buxton, Halifax, Batley, Selby, Goole, Mansfield, Leeds, Bradford, Goole, Oldham, Stockport, Wilmslow, Bury, Rochdale, Manchester, Altrincham.\n\nExperience / Qualifications:\n\n * Will have obtained the BOHS P402 or RSPH equivalent\n\n * Succesful work history as an Asbestos Surveyor\n\n * Exceptional industry knowledge, including the HSG 264 guidelines\n\n * Strong IT and literacy skills\n\n * Excellent communicator\n\n * Dilligent and professional\n\nThe Role:\n\n * Working across a variety of premises, including: commercial, domestic, industrial, public sector and local authority\n\n * Collecting and logging ACM samples\n\n * Completing management, demolition and refurbishment asbestos surveys\n\n * Producing detailed technical reports for clients\n\n * Building and maintaining positive working relationships with clients\n\n * Wearing PPE at all times\n\n * Carry out re-inspection surveys\n\nAlternative job titles: Asbestos Consultant, Senior Asbestos Surveyor, Asbestos Detector, Asbestos Site Analyst, Asbestos Surveyor / Analyst, P402 Surveyor.\n\nFuture Select are the leading market supplier for recruitment in the Asbestos industry; we work with the best clients and candidates and supply the majority of permanent jobs in the asbestos market. We have a large dedicated team, with over 25 years combined industry experience within Asbestos recruitment specifically geared to dealing with Asbestos Surveyors/Analysts/Lab Technicians, Administrators, Project/Regional /Technical/Quality/Training/Sales Managers through to Director Level for both Consultancy & Removal. We have intrinsic knowledge of the market place, as well as respecting candidates/clients confidentiality in this close knit market sector.\n\nWe are also interested in anyone with p401/p402/p403/p404/p404 or s301 CCP.\n\nWe are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills.\n\nFuture Select Copyright 2026

REED Engineering & Manufacturing are working with a leading Engineering & Manufacturing company.\n\nJob Summary\n\nAs a key member of the GFM team, you will carry out crane driving, slinging tasks, and despatch operations within the department. This role supports both the Forge and Heat Treatment areas and requires a strong commitment to safety, quality, and teamwork.\n\nMain Duties & Responsibilities\n\nOperate overhead (cab) cranes in the GFM Forge and Heat Treatment departments.\nOperate pendant/remote-controlled cranes across GFM areas.\nPerform slinging duties to support forging and heat treatment processes.\nMaintain high standards of housekeeping within all work areas.\nLoad and unload materials using cranes and forklift trucks.\nManage despatch processes, ensuring accurate completion of all relevant paperwork.\nConduct receipt inspections of incoming materials and complete inspection documentation for subcontracted work.\nEnter operational and material data into the internal computer system.\nAssist in heat treatment operations as required.\nCarry out pre‑shift crane checks.\nGenerate and submit STOP cards to support safety improvement initiatives.DAYS & AFTERNOONS, ALSO THE ROLE OFFERS A BONUS OF UP TO 10% £3,1767

CNC Machinist\nLodestone Recruitment is currently partnered with a local manufacturer for the medical sector. Due to an increase in work, they seek skilled CNC Machinists for their Sheffield facility. This is an excellent opportunity to work in a precision engineering environment producing high-quality medical components.\nThe Role\nAs a CNC Machinist, you will be responsible for setting and operating CNC machines to manufacture orthopaedic medical components. You’ll work with high-spec materials in a regulated environment where quality and accuracy are critical.\nKey responsibilities include:\n * Setting and operating CNC machines (Milling and/or Turning considered)\n * Working to tight tolerances and detailed engineering drawings\n * Conducting in-process inspection using measuring equipment\n * Ensuring adherence to quality standards and regulatory requirements\n * Maintaining a clean and safe working environment\nWorking Hours (37.5 hours per week)\nRotating shifts (Monday to Friday, no nights):\n * Days: 6am – 2pm (Mon–Thurs), 6am – 11:30am (Friday)\n * Afternoons: 1:45pm – 10pm (Mon–Thurs), 11:15am – 3:45pm (Friday)\nBenefits\n * Salary - £36k\n * 27 days annual leave + bank holidays, increasing to 32 days with service\n * (3 days reserved for Christmas shutdown)\n * Company pension (Aviva, salary sacrifice) – 4% employer / 4% employee contribution after 3 months\n * Free onsite parking\n * 3-month probation period\nUpon successful completion of probation:\n * Life Assurance (2x salary)\n * Westfield Health Cash Plan (Level 5)\n * Cycle to Work Scheme\n * Employee Assistance Programme (EAP)\nAbout You\nWe’re looking for candidates who:\n * Must be Apprentice trained or Time-served\n * Have experience in CNC Machining (setting and operating with basic editing)\n * Can read and interpret engineering drawings\n * Have experience working to tight tolerances\n * Are quality-focused and detail-oriented\n * Are reliable and able to work rotating shifts\nLocation\nBased in North Sheffield with good links to M1, with plentiful free onsite parking.\nApply Now\nIf you are an experienced CNC Machinist looking for your next opportunity in the Sheffield area, apply today for immediate consideration.\nLodestone Recruitment Ltd is acting as an employment agency in relation to this vacancy

REED Engineering & Manufacturing are working with a leading Engineering & Manufacturing Company \n\nInspector Dispatcher\n\nPrimary Duties and Responsibilities\n\nSafely load and unload materials using pendant cranes, forklifts, and sideloaders.\nOversee and conduct initial inspections of incoming goods, raising documentation for any non‑conforming products.\nPerform final product inspection and identification prior to despatch.\nWork in full compliance with TI-OP-061-LTD (Final Inspection), TI-OP-062-LTD (Handling, Storage and Delivery), and all relevant quality documentation.\nCarry out material analysis using the Niton gun.\nConduct final inspection of products.\nSupport operations and assist with training on all saws and straightening equipment.\nActively participate in all company‑driven initiatives.\nAttend and contribute to meetings relevant to the role.\nGenerate IDNs and escalate issues to Production Control when required..\n\nThis role includes bonus of up to 15% as well OTE £34,395

Are you an experienced electrical professional with a passion for quality, safety, and compliance? We’re looking for a knowledgeable and hands-on Compliance Manager to oversee all aspects of electrical testing, inspection, and engineering compliance within a well-established engineering services firm.\n\nIn this key role, you’ll work closely with operational teams across all stages of project delivery – from pre-construction through to completion – ensuring the highest standards of installation and compliance are maintained.\n\nWhat you’ll be doing:\n\n * Acting as the company’s NICEIC Qualified Supervisor and primary liaison with the NICEIC Area Engineer.\n\n * Carrying out regular site audits to ensure compliance with BS7671 and NICEIC requirements.\n\n * Reviewing and verifying internal and third-party electrical test certification.\n\n * Supporting teams with technical queries, electrical design input, and ensuring robust commissioning and testing practices.\n\n * Managing the upkeep of internal test equipment and overseeing electrical safety in the company’s office environment.\n\n * Contributing to small works project management and supporting the broader business on electrical compliance matters.\n\nWhat we’re looking for:\n\n * NVQ Level 3 in Electrical Installation (or equivalent).\n\n * C&G 2391 or equivalent in Inspection, Testing & Certification.\n\n * In-depth knowledge of current IET Wiring Regulations (BS7671).\n\n * At least two years’ experience in a managerial or supervisory capacity, with responsibility for technical standards in electrical work.\n\n * Strong communication and documentation skills with an eye for detail.\n\n * A full UK driving licence.\n\nWhat’s in it for you:\n\n * Competitive salary and benefits package.\n\n * Opportunity to take a senior role within a stable and growing company.\n\n * Autonomy and responsibility in a key compliance role with real impact.\n\n * Supportive environment with a focus on quality, safety, and continuous improvement.\n\nReady to take the lead on electrical compliance?\nApply now with your CV to learn more about this opportunity

CNC Turner\n\nAerospace\n\nImmediate start\n\n13-week contract\n\nOutside IR35 with Ltd Co\n\n£27.50 to £42.75 per hour\n\nAnticipated 60 hours per week\n\nA globally recognised manufacturer of critical aerospace components is urgently seeking 2 CNC Turners to support a surge in demand on a 13-week contract.\n\nThe Role\n\nTo support project requirements, you’ll be turning flanges in Inconel with use machine tools with Fanuc controllers\n\nKey responsibilities include:\n\n * Loading and unloading tooling to carry out machining operations\n\n * Working to fine tolerances across a range of materials\n\n * Performing visual and dimensional inspections\n\n * Using precision measuring equipment (shadowgraph, gauges, verniers)\n\n * Operating one or more CNC machines simultaneously\n\n * Ensuring all products meet customer and internal standards (including NADCAP and AS9100)\n\nWhat We’re Looking For\n\nYou’ll be a skilled, detail-focused engineer with experience in precision manufacturing\n\nEssential:\n\n * Engineering qualification (Apprenticeship or equivalent)\n\n * Minimum 6 years’ experience in a precision manufacturing environment (aerospace preferred but not essential)\n\n * Strong experience with Fanuc controls\n\n * Ability to work to tight tolerances and strict quality standards\n\n * Experience working to production targets\n\n * Self-inspection with use of hand tools, eg micrometers, vernier calipers\n\nWhy Apply?\n\n * Competitive rate of £27.50 to £42.75 per hour\n\n * Immediate start available\n\nIf you’re a CNC Turner available for an immediate start apply now

Electrical Installations Manager\n\nLocation\nUK Wide | Remote, Site and Office Visits\n\nEmployment Type\nFull Time | Permanent\n\nSalary\nUp to £60,000 depending on experience\n\nOverview\n\nWe are seeking an experienced Electrical Installations Manager to oversee electrical installation works across commercial solar PV projects throughout the UK.\n\nThis role involves managing Electrical Leads and installation teams delivering full electrical scope across commercial and public sector projects. The successful candidate will ensure installations are delivered safely, efficiently and in line with programme and quality standards.\n\nThe position is a mix of remote working, site visits and occasional office attendance, with travel required across live projects.\n\nKey Responsibilities\n\n• Manage electrical installation works across commercial solar PV projects\n• Supervise Electrical Leads and site teams across multiple projects\n• Oversee installation of containment, cabling, inverters and associated electrical systems\n• Ensure installations are completed safely and in line with specifications and standards\n• Monitor progress across sites and maintain programme timelines\n• Work closely with project managers, mechanical teams and subcontractors\n• Carry out site inspections and ensure quality and compliance standards are met\n• Support planning, labour allocation and resource management across projects\n\nEssential Requirements\n\n• Proven experience managing electrical installation teams\n• Background in commercial or industrial electrical installations\n• Experience delivering solar PV or large scale construction projects\n• NVQ Level 3 Electrical\n• 18th Edition\n• Strong leadership and multi site coordination experience\n• Full UK driving licence\n\nDesirable Qualifications\n\n• 2391 or 2394/2395 Inspection and Testing\n• Solar PV experience or BPEC qualification\n• SSSTS or SMSTS\n• Experience managing teams across multiple sites\n\nWorking Pattern and Benefits\n\n• Salary up to £60,000 depending on experience\n• Company van provided\n• Remote, site and office based working\n• UK wide travel required\n• Staying away depending on project location\n• Staying away allowance provided

Join a world-renowned aerospace and defence organisation as a Quality Assurance Engineer onsite in Sheffield onsite Monday to Thursday and Friday from home \n\nWould you like to join a global aerospace and defence organisation? Do you want to work as part of an organisation protecting people and maintaining maximum national security? \n \n Due to a drive for greater success, this advanced manufacturing business is currently searching for a Quality Assurance Engineer to add to their talented, hardworking team in Sheffield on a 12 month contract. Striving for innovation and creativity you can ensure no two days will be the same.\n\nContract: 12 months\n\nRATE: £37.14 per hour inside IR35 umbrella \n\nHeadcount: 1\n\nLocation: Sheffield Monday to Thursday with Friday from home\n\nThe role:\n\nThe role will be based in the quality control production team \nYou'll be doing Inspections of Welding and Fabrications across the production team\nNon conformance \n\nExperience:\n\nWeld and Fabrication inspection and checks\n\nProduction knowledge\n\nSAP - not essential but preferred\n\nHNC in Production or Welding\n\nBackground\n\nThis is an exciting opportunity to work for a global business that has developed a strategy of working closely with its contingent workforce. Within the role, you can expect to:\n\nWork on complex, cutting-edge projects\n Achieve a work/life balance\n Develop your skills\n\nAPPLY NOW\n\nIf this sounds like the role for you, we'd love to hear from you! Send your CV to Stella today

Structural Engineer\nLocation: Sheffield\n\nOur client are seeking a Structural Engineer for their office based in Sheffield. The Structural Engineer will be working for a well-known consultancy, which operate within the Civil, Structural and Geotechnical Engineering. This is an exciting opportunity for a Structural Engineer to join a fact growing company to work on a range of projects within a Multi-Disciplinary Environment.\n\nThe Structural Engineer will be working on large contracts as well as Structural reports / calculations and Designs. The Structural Engineer will assist in the design work on projects and tasks, with moderate supervision, to ensure the tasks are delivered as briefed and will be given the opportunity of career development and chartership training.\n\nStructural Engineer Position Overview\n\nProduce design calculations\nPreparation of sketch plans, working drawings, specifications and reports\nAssist with planning site investigation works\nPreparing feasibility studies and providing design advice\nDevelopment and use of computer-based systems to improve efficiency\nUndertake site inspection and attend site meetings\nProduce designs, assessments and calculations in accordance with quality procedures\nLiaise effectively with clients, other design team members and third parties\nCommunicating with the client, other consultants and colleagues in the delivery of projects whilst maintaining a positive client relationship\nUnderstand and adhere to existing working practices, methods and procedures\nWork within the given programme and cost constraints \n\nStructural Engineer Position Requirements\n\nDegree within a Civil or Structural Engineering Discipline\nAt least two years experience within Structural Engineering\nKnowledge of AutoCAD\nConversant in designing to British Standards/UK version of Eurocodes\nUnderstanding of CDM regulations and the responsibilities of a designer\nConversant in designing structures in concrete, steelwork, timber and masonry\nUnderstanding of engineering principles\nAble to produce hand calculations and sketches of structural elements\nGood interpersonal skillsStructural Engineer Position Remuneration\n\nCompetitive Salary\nFlexitime\nEarly finish on Fridays\nEnhanced sickness pay\nCareer development - CPD\n26 Days Holiday + BHBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.\n\nWe are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Job Title: Quality Engineer\nLocation: Sheffield\nSalary: £40,000-£42,000\n\nThe Opportunity\n\nWe are recruiting for an experienced Quality Engineer to join a well-established operation based in Sheffield. This is an excellent opportunity to play a key role in maintaining and improving quality standards within a high-volume manufacturing environment.\n\nThe business supplies precision cast components into demanding sectors including engineering, automotive, rail and industrial markets, where compliance, traceability and process control are critical.\n\nKey Responsibilities\n\nMaintain and develop the Quality Management System in line with ISO 9001 standards\n\nLead internal and external audits, including customer and third-party audits\n\nConduct root cause analysis (8D, 5 Why, Fishbone) and drive corrective & preventive actions\n\nSupport foundry process control including melting, moulding, casting and finishing operations\n\nOversee metallurgical and dimensional inspection processes\n\nManage non-conformance, concession and customer complaint processes\n\nWork closely with production, metallurgy and engineering teams to reduce scrap and improve yield\n\nDrive continuous improvement initiatives across the foundry\n\nMaintain quality documentation, control plans, PFMEA and inspection plans\n\nLiaise directly with customers on technical quality matters\n\nRequired Experience & Skills\n\nProven experience as a Quality Engineer.\n\nStrong understanding of metallurgical processes and casting defects\n\nExperience with ISO 9001 (IATF 16949 advantageous)\n\nCompetent in root cause analysis methodologies\n\nExperience with dimensional inspection techniques and CMM (advantageous)\n\nStrong analytical mindset with a hands-on approach on the shop floor\n\nAbility to communicate effectively across production and management teams\n\nQualifications\n\nInternal Auditor qualification (advantageous)\n\nWhat's on Offer\n\nSalary of £40,000-£42,000\n\nStable, long-term opportunity within a respected Sheffield manufacturing business\n\nOpportunity to influence process improvement and quality strategy\n\nSupportive engineering-led environment\n\nWR Engineering are the #1 recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide.\n\nWR is acting as an Employment Agency in relation to this vacancy

Wax Operative\n\nWe are seeking a reliable and detail-focused Wax Operative to support our clients manufacturing process. This hands-on role involves wax injection, trimming, inspection, and maintaining tooling to produce high-quality components.\n\nThis position would suit someone with manufacturing or production experience who is comfortable working to tight tolerances and quality standards.\n\nRole Benefits:\n\nLocation: Sheffield: S9\nContract: Full-time permanent\nHours: Days & Nights rotational (shift flexibility required) - Days - Monday to Wednesday (Apply online only) and Thursday (Apply online only) & Nights - Monday to Wednesday (Apply online only) and Thursday (Apply online only)\n£13.50 per hour + 12.5% shift allowance\nFull training and structured skill development\nOpportunity to progress within a specialised manufacturing environment\nStable, team-focused workplace\nOvertime opportunitiesKey Responsibilities:\n\nCarry out wax injection and trimming processes to specification\nInspect wax patterns for defects such as air bubbles, distortion, or incomplete fills\nAdjust machine parameters to correct quality issues\nMaintain dies and tooling in clean, working condition\nAccurately complete production records and job paperwork\nWork to daily/weekly production targets\nMaintain high standards of housekeeping and safety at all times Essential Criteria:\n\nPrevious experience in a manufacturing, production, or factory environment\nAbility to use hand tools safely and accurately\nStrong attention to detail and ability to spot defects\nComfortable working to targets, deadlines, and quality standards\nBasic understanding of Health & Safety in a workshop or factory setting\nGood level of numeracy and literacy (for completing job sheets and documentation)\nReliable with good timekeeping and attendance\nWillingness to work shift patterns and overtime when required \n\nDesirable Criteria:\n\nExperience in investment casting, wax processes, or similar precision manufacturing\nPrevious experience with injection moulding machinery or process setting\nAbility to read and interpret basic engineering drawings or specifications\nExperience identifying and correcting process defects\nKnowledge of lean manufacturing or continuous improvement practices\nForklift or other factory-related certifications (if relevant)Skills & Behaviours:\n\nPositive, team-oriented attitude\nWillingness to learn multiple processes across departments\nAbility to work independently once trained\nFlexible and adaptable to changing production needs\nTakes accountability for quality of work

QC InspectorSheffield £35,000 - £45,000 DOE Shillito Group are recruiting for a QC Inspector on behalf of a well-established Sheffield engineering manufacturer specialising in high integrity fabrication and process plant equipment. This is a hands on inspection role within a busy manufacturing environment, working on pressure vessels, heat exchanges, pipework and bespoke fabricated equipment supplied into demanding industrial sectors. The Role Responsibilities include: • Goods inward inspection, • Reviewing and approving material certification, • In-process and final inspection activities, • Producing dimensional and QC reports, • Supporting production and engineering teams during manufacture, • Equipment calibration, • Working to company quality procedures and ISO standards, • Experience within fabrication, manufacturing or heavy engineering, • Ability to read and understand engineering drawings, • Understanding of fabricated equipment and inspection processes, • Knowledge of materials and manufacturing standards, • Experience working within ISO 9001 environments, • Strong attention to detail and organisational skills, • Good communication skills, • Salary between £35,000 - £45,000 depending on experience, • Annual pay reviews, • Annual bonus scheme, • Health insurance, • Pension reviews, • Generous holiday, • Modern working environment, • Long-term career stability Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief.

Infrastructure Inspections Manager\n Location: Sheffield with remote working\n Salary: £55,000+ depending on experience\n\nAn established specialist infrastructure inspection consultancy is looking to appoint an Infrastructure Inspections Manager to lead and grow its inspections capability across major UK rail, highways, and built environment assets. This is a senior operational role combining leadership, technical oversight, client management, and strategic input.\n\nThe Infrastructure Inspections Manager will take responsibility for the day-to-day performance of the inspections function, overseeing tendering, inspection planning, delivery quality, and reporting. You will work closely with senior leadership while acting as a key point of contact for strategic clients and complex projects.\n\nKey responsibilities include:\n * Preparing written and commercial tenders for inspection contracts\n * Developing inspection plans and programmes for complex structures\n * Briefing, training, and supporting inspection teams to current standards\n * Leading the delivery of challenging inspection projects\n * Managing client relationships and acting as project manager on major schemes\n * Supporting business strategy, financial performance, and resource planning\n * Ensuring full compliance with health and safety requirements\n\nAbout you:\n * Valid UK driving licence and strong IT capability\n * Confident communicator with clients and site teams\n * Experience in construction or infrastructure environments\n * Site-based operational experience is advantageous\n * IRATA, CSCS, or inspection certifications are beneficial\n\nWhat's on offer:\n * Salary of £55,000+ depending on experience\n * 25 days holiday plus bank holidays\n * Healthcare cash plan and life assurance\n * Training, development, and career progression\n * Flexible working and employee support benefits\n\nEligibility to Apply\n Applicants must already have the right to work in the UK. Sponsorship is not available.\n\nIf you are an experienced Infrastructure Inspections Manager looking to step into a visible, influential leadership role, this opportunity offers long-term progression and real impact.\n\nPenguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience

Join Gilmartins as a Senior Operative – Earn £50,000 Basic\n\nWe Are Building the Best Trade Team in Social Housing Repairs\n\nGilmartins is expanding — and we are looking for the very best operatives in the industry to join us as Senior Operatives.\n\nThis is not just another trade role.\n\nThis is an opportunity to join a company that rewards professionalism, quality, reliability, and leadership.\n\nWe are recruiting experienced, high-performing operatives across Sheffield in the following trades:\n\n * Plumber Multi Trades\n\n£50,000 BASIC SALARY\n\nWe are offering:\n\n * £50,000 basic salary\n\n * Permanent, full-time employment, monthly pay\n\n * Company van & fuel card for business use only (no personal use permitted)\n\n * PDA & branded uniform\n\n * Long-term job security with stable, local workstreams\n\n * Career progression opportunities\n\nWhat Makes a Gilmartins Senior Operative Different?\n\nWe are looking for operatives who:\n\n * Take pride in delivering high-quality work\n\n * Deliver excellent customer service\n\n * Complete jobs right first time\n\n * Work professionally and safely at all times\n\n * Communicate effectively with tenants and office teams\n\n * Support and mentor other operatives\n\n * Maintain excellent attendance and timekeeping\n\n * Respect company vehicles, materials, and equipment\n\n * Represent the business professionally every day\n\nThis Role Is NOT for Everyone\n\nThe Senior Operative role comes with high standards, accountability, and responsibility.\n\nSuccessful applicants will be expected to:\n\nConsistently achieve strong KPI performance\n\nMaintain excellent quality inspection scores\n\nDemonstrate outstanding reliability and timekeeping\n\nKeep van stock organised and controlled\n\nMaintain a clean and professional vehicle\n\nFollow all health & safety and asbestos procedures\n\nUse technology and PDAs correctly\n\nWork independently with minimal supervision\n\nTake ownership of jobs from start to finish\n\nExperience Required\n\nApplicants must have:\n\n * Proven experience within social housing reactive maintenance\n\n * Relevant trade qualifications where applicable\n\n * Full manual driving licence – no automatic vans available\n\n * Strong communication skills\n\n * Experience working in occupied properties\n\n * Ability to work under pressure and manage workloads effectively\n\nWhy Join Gilmartins?\n\nAt Gilmartins, we self-deliver our contracts using directly employed operatives and specialist local teams. We believe the people on the front line are the face of the business — and we reward the best accordingly.\n\nWe are investing heavily into building one of the strongest operational teams in the sector and are looking for ambitious operatives who want to be recognised and rewarded for high performance.\n\nIf you are tired of being just another number and genuinely believe you are among the best in your trade, we want to hear from you.\n\nApply Today\n\nPositions are limited and we are looking to hire immediately for the right candidates.\n\nJoin a company where hard work, professionalism, accountability, and quality are genuinely recognised and rewarded

Location: Remote (UK-based) with occasional travel Reports to: UK Commercial Director Regulated by: Care Quality Commission (CQC) Salary: £60-70k base dependant on experience + £10k bonus We’re hiring a Practice Manager / Registered Manager to lead operations for a fast-growing, specialist telehealth clinic in the medical cannabis space. This is a pivotal role sitting at the intersection of operations, compliance, and patient experience - ensuring safe, compliant prescribing of Schedule 2 controlled drugs while delivering a seamless, high-quality patient journey. The opportunity You’ll take ownership of the clinic’s non-clinical operations end-to-end, acting as the CQC Registered Manager and ensuring the service is safe, scalable, and audit-ready. Working closely with clinical, commercial, and pharmacy partners, you’ll play a key role in shaping how care is delivered in a highly regulated, evolving sector. What you’ll be responsible for • Act as CQC Registered Manager, ensuring compliance across all regulatory standards, • Oversee day-to-day operations (patient services, bookings, scheduling, workflows), • Lead and develop a high-performing patient support team, • Design and optimise the end-to-end patient journey (enquiry > consultation > prescription > repeat), • Own non-clinical governance, risk, safeguarding, and audit readiness, • Coordinate across clinicians, MDT processes, and pharmacy partners to ensure smooth delivery, • Monitor and improve operational performance (conversion rates, turnaround times, CSAT/NPS, repeat prescriptions), • Identify opportunities for process improvement, automation, and scalability across systems and workflows What success looks like (6–12 months) • A fully compliant, inspection-ready prescribing pathway, • Reduced time from consultation to prescription, • Improved conversion, retention, and patient satisfaction, • A confident, well-trained patient services team, • Strong, reliable pharmacy and supply chain relationships What you’ll bring • Experience as a CQC Registered Manager (or eligibility to register), • Strong understanding of UK healthcare regulation and controlled drug governance, • Experience leading patient services or operational teams within healthcare, • Background in telehealth, digital health, or private healthcare environments, • Proven ability to manage and optimise complex, multi-step patient pathways, • A data-led mindset with a focus on performance, efficiency, and continuous improvement Nice to have • Experience in medical cannabis or other controlled drug settings (e.g. pain, psychiatry, addiction), • Familiarity with MDT models, prescribing workflows, and pharmacy coordination, • Experience supporting or scaling a high-growth, regulated healthcare business If you're ready to make a real impact, we'd love to hear from you!

Subcontract / Self‑Employed Electrician (Part‑Time, Ongoing Projects) Location: Market Harborough + up to 1‑hour travel radius Engagement: Subcontract / Self‑Employed Flexible commitment: 1–2 days per week (project‑based) Some evening and weekend work required depending on customer operations The Opportunity An established and growing Mechanical & Electrical Engineering business is expanding its subcontractor network due to a strong pipeline of ongoing work across domestic and commercial projects, including EV charging, solar PV, and battery storage. We’re looking to build a long‑term relationship with a reliable, professional electrician who takes pride in their workmanship and represents clients to a high standard. This role is ideal for a self‑employed or subcontract electrician seeking consistent, well‑paid work without the burden of client acquisition. Scope of Work You’ll support a range of projects including: • Domestic & commercial electrical installation, maintenance, and repairs, • Inspection, testing, and certification (BS7671 compliant), • EV charger installations and maintenance, • Solar PV and battery storage installations (advantageous), • Fault‑finding and troubleshooting, • Ensuring safe, compliant, and high‑quality work at all times Requirements Essential: • Level 3 Diploma in Electrical Installation, • 2391‑52 (or equivalent) – Inspection & Testing, • Strong working knowledge of BS7671, • Proven experience across domestic and commercial work, • Ability to work independently on site, • Full UK driving license, • 3+ years’ experience within electrical / electrical manufacturing / electronics environments, • Comfortable working in an onsite setting Desirable: • EV charger installation experience, • Solar PV / battery storage exposure, • AM2 qualification, • NICEIC or NAPIT registration What’s On Offer: • Reliable, repeat work as projects grow, • Flexible scheduling around your existing commitments, • Prompt, straightforward payment, • Clear communication and organized projects, • Professional, long‑term subcontract relationship

Freelance Opportunity – PVOC Inspectors (UK) We are currently looking to expand our network of freelance PVOC (Pre-Verification of Conformity) Inspectors across the UK. If you are based in the United Kingdom and have experience in inspection, testing, and certification, particularly within export compliance and conformity assessment, we would be keen to connect with you. Key Responsibilities: • Conduct pre-shipment inspections across the UK, • Verify product conformity against applicable international and importing country standards, • Review documentation (commercial invoices, packing lists, test reports), • Support sampling and testing when required, • Prepare clear and accurate inspection reports Requirements: • Proven experience in PVOC or similar inspection programs, • Strong understanding of international standards and quality requirements, • Excellent attention to detail and professional integrity, • Ability to work independently and travel within the UK, • Relevant technical qualifications are an advantage 📍 Opportunities available across England, Scotland, Wales, and Northern Ireland. If you are interested or know someone who might be a good fit, please reach out directly with your CV and relevant experience to: 📩 Tracy Bezuidenhout 📧

Warehouse Operative (Final Inspection).An excellent opportunity for a Warehouse Operative to join a fast-paced manufacturing environment, supporting goods in/out, stock control and quality / final inspection processes.If you’ve also worked in the following roles, we’d also like to hear from you:

A skilled CNC Turner is needed to programme, set and operate lathes to produce precision-engineered parts to high quality standards, using FANUC or Siemens controls, engineering drawings and inspection equipment.If youve also worked in the following roles, wed also like to hear from you: CNC Lathe P

Quality Inspector Location: Rotherham, South Yorkshire. Salary: Up to £19.00 per hour including shift allowance (circa £37,500), plus overtime. Contract: Full-time, permanent. Shifts: 4 day week, Monday to Thursday. Rotating days (6am to 4pm) and nights (8pm to 6am). Upto £19 per hour and a 4 day week. That means a 3 day weekend, every week. If you are a Quality Inspector and your current role feels repetitive or you are being pushed to rush work out, this is worth a look. You will be joining a large manufacturing site in Rotherham working across sectors including defence, rail and heavy engineering. The work is varied, the equipment is well invested, and the expectation is simple. Do the job properly. What the role looks like day to day: This is hands-on inspection work across machined parts and fabricated assemblies. You will be working from drawings and CAD models, using your judgement to make decisions on quality. It is a structured environment where standards matter and people take pride in getting things right. What you will be doing: • Inspecting components and fabrications against engineering drawings and CAD., • Using FARO or similar measuring arms., • Working with Polyworks and standard inspection tools., • Producing clear ...

Fire Door Technical Supervisor Sheffield £44,000 + 5% Bonus and Business use car Brief Fire Door Technical Supervisor needed for a large well known Facilities Management organisation based in Sheffield who are looking to employ an experienced and well-rounded Fire Door Technical Supervisor that takes pride in their work. The successful candidate will be responsible for the oversight of fire door statutory compliance across delegated PFI Projects in the area. The role will have specific line management responsibility for the dedicated mobile Fire Door Inspection and Remedial team but will additionally have oversight and support the Operational teams across our PFI projects to ensure the statutory compliance of Fire Doors. You will plan and prioritise the inspection of Fire Doors to ensure the inspections remain statutory complaint utilising both the Maximo (CAFM) and Bolster (Fire Compliance systems). This will include ensuring that the Fire Door inspectors are competent and trained to the required standard, that PPM Inspections plans are aligned to maintain compliance, Quality checks on documentation, that remedial work requests are generated and completed to the required quality standards. The role is required to work within recognised safe systems of work, business policies, procedures and in accordance with all aspects of health and ...

Manufacturing Systems Integration Consultant / Architect We have an urgent customer need - I am seeking an experienced Manufacturing Systems Integration Consultant / Architect to support a portfolio of high-priority digital manufacturing and automation initiatives. This is an immediately available, government-funded engagement with approved budgets and no security constraints - the programme is ready to move with the right candidate in place. The successful consultant will work at the intersection of MES, manufacturing automation, and IT systems integration, driving deployment and adoption of a broad range of advanced manufacturing technologies across the shop floor and digital infrastructure. Key Responsibilities The following workstreams have been confirmed as the primary focus areas: • Deploy Automated Engine External Capturing (AEEC) solutions using camera and drone technology to support quality and inspection workflows, • Lead roll-out of local MES tablets across the shop floor, ensuring correct build configuration and user adoption, • Implement material sorting and clipping automation, • Integrate MoFEM process modelling software, • Install and configure Abacus (2021) for Inertia Welding modelling, supporting simulation and manufacturing process validation, • Implement the Manufacturing Intelligence Systems (MISSY) platform, driving data visibility and operational insight across manufacturing lines, • Configure and deploy Signature Analyser (SA) data capture from Winbro wire EDM machines, • Integrate AV&R machines and associated software with the MES and Manufacturing Engineering (ME) systems, • Automate turbine blade movement within manufacturing lines to improve throughput and reduce manual handling, • Deploy Zoller automation solutions in support of tooling management and measurement workflows We are looking for a technically credible, delivery-focused consultant with a strong background in manufacturing systems integration and a track record of deploying complex digital and automation solutions in high-value, regulated manufacturing environments. Aerospace, defence, or precision engineering sector experience is strongly preferred. Essential experience and skills: • Proven delivery experience in MES implementation, integration, or deployment (Apriso/DELMIA, Opcenter, or equivalent), • Hands-on experience integrating manufacturing software systems into existing IT/OT estates in a regulated environment, • Familiarity with shop-floor automation technologies - robotics, machine integration, or automated materials handling, • Strong stakeholder management skills - able to work across IT, engineering, and operations teams, • Experience in aerospace, defence, nuclear, or high-value precision manufacturing Desirable - direct knowledge of any of the following: • AV&R machine/software integration, • Zoller tooling automation solutions, • Winbro wire EDM or Signature Analyser data capture, • MoFEM, Abacus, or equivalent FEA/process modelling software, • Drone or camera-based automated inspection systems (AEEC or similar), • MISSY or equivalent manufacturing intelligence platforms

Join a world-renowned aerospace and defence organisation as a Quality Assurance Engineer onsite in Sheffield onsite Monday to Thursday and Friday from home Would you like to join a global aerospace and defence organisation? Do you want to work as part of an organisation protecting people and maintaining maximum national security? Due to a drive for greater success, this advanced manufacturing business is currently searching for a Quality Assurance Engineer to add to their talented, hardworking team in Sheffield on a 12 month contract. Striving for innovation and creativity you can ensure no two days will be the same. Contract: 12 months RATE: £37.14 per hour inside IR35 umbrella Headcount: 1 Location: Sheffield Monday to Thursday with Friday from home The role: • The role will be based in the quality control production team, • You'll be doing Inspections of Welding and Fabrications across the production team Weld and Fabrication inspection and checks Production knowledge SAP - not essential but preferred HNC in Production or Welding Background This is an exciting opportunity to work for a global business that has developed a strategy of working closely with its contingent work...

QA QC Engineer Location York | Site Based Employment Type Contract Rate £300 to £400 per day depending on experience Overview We are seeking a QA QC Engineer to support quality assurance and control across utility scale solar PV projects based in York. This role will be working under a QA QC Manager, supporting the delivery of large scale EPC projects. You will play a key role in ensuring all works are completed in line with project specifications, standards, and compliance requirements. The position is fully site based, 5 days per week with Saturday work available depending on programme requirements. Key Responsibilities • Support implementation and maintenance of the project Quality Management System • Monitor construction activities to ensure compliance with QA QC standards and specifications • Review and manage project documentation and inspection records • Conduct site inspections and support testing activities • Identify non conformities and assist with corrective and preventive actions • Work closely with site teams, subcontractors and management to maintain quality standards • Support reporting on quality performance to the QA QC Manager • Ensure all works are delivered in line with health and safety and project procedures Essential Requirements • Experience in a QA QC role within solar, renewable or construction projects • Background wo...

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Sensor Systems Business Unit in Fareham. The Production Quality Engineer role requires experience in quality management within regulated industries, preferably defence or aerospace. The Quality Engineer will ensure compliance with quality standards, manage supplier audits, and support continuous improvement activities. Strong analytical and communication skills, along with knowledge of quality tools and regulations are essential. Key Responsibilities: Internal Quality Requirements: * Working knowledge of EN9100 / ISO 9001 quality management systems. * Experience supporting internal audits, corrective actions, and continuous improvement initiatives. * Proven ability to perform root cause analysis using tools such as 8D, 5 Whys, Fishbone, and fault tree analysis. * Experience managing nonconformances, deviations, concessions, and corrective/preventive actions (CAPA). * Ability to review and approve manufacturing processes, work instructions, and inspection plans to ensure quality requirements are met. * Experience with First Article Inspection (FAI) per AS9102 or equivalent standards. * Preferably knowledge of configuration management, drawing control, and change management (ECR/ECO). * Strong understanding of GD&T, engineering drawings, and specifications. * Ability to support production, engineering, and test teams to resolve quality issues and reduce defect escape. Supplier Quality Requirements: * Experience qualifying, auditing, and monitoring suppliers and subcontractors. * Ability to conduct supplier audits, including process audits and quality system assessments. * Experience managing supplier corrective actions (SCARs) and driving timely, effective resolution. * Knowledge of supplier risk management, including critical supplier identification and performance metrics. * Experience reviewing and approving supplier documentation such as inspection reports, material certifications, FAIRs, and CoCs. * Ability to work with suppliers to improve process capability, yield, and compliance. * Familiarity with flow-down of defence and customer quality requirements to suppliers. Compliance & Regulatory Requirements: * Understanding of defence industry regulations, including ITAR, EAR, and customer-specific requirements. * Experience ensuring compliance with contractual, regulatory, and customer quality requirements. * Ability to support customer audits, source inspections, and government quality representatives as required. Qualifications and Skills: * Bachelor's degree/HND in Engineering (Preferable) in a Mechanical, Electrical, Manufacturing, Quality, or related field. * 5+ years of experience in Product Quality, Manufacturing Quality, or Supplier Quality within a regulated industry (preferably defence, aerospace, automotive, medical devices, or similar). * Experience working in a defence or aerospace environment with controlled products and strict compliance requirements preferred. * Experience with Quality tools and software (e.g., SPC, MSA, PFMEA, control plans). * Experience in ERP/MRP systems and electronic quality management systems (eQMS). * Strong data analysis skills using Excel or similar tools. * Strong problem-solving and analytical skills with attention to detail. * Ability to work cross-functionally with Engineering, Manufacturing, Supply Chain, and Program Management teams. * Clear and effective written and verbal communication skills, including technical reporting. * Ability to manage multiple priorities in a fast-paced, highly regulated environment. * Willingness to travel to supplier sites as required. As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level, or have the ability to gain it.

CNC Machinist (Milling - 3 Month Contract) Location: Sheffield Rate: £20.00 to £21.00 per hour (DOE) + overtime Contract: 3-month fixed term Start: Immediate (interviews available now) Up to £21 per hour, immediate start, and a contract where you can get straight into the work. If you are a CNC Machinist looking for a short-term role where the focus is on machining and output, this is worth a look. The work is already running, and you will be supporting production within an established setup. You will be machining precision components in an aerospace-focused environment where accuracy and consistency are key. The expectation is simple. Read the drawing, set it correctly, and produce parts to standard. What the role looks like day to day: You will be working on CNC milling machines producing components to tight tolerances, including some specialist materials. You will manage your own work, carry out inspection, and keep things running throughout your shift. What you will be doing: Operating CNC milling machines Setting and running jobs Reading and working from engineering drawings Machining components to tight tolerances Inspecting parts using Verniers, micrometres and gauges Making adjustments to maintain output Supporting production during a busy period Following quality standards including AS9100 and NADCAP What they are looking for: Proven CNC machining experience Strong milling background Able to read drawings and work independently Confident with manual inspection equipment Experience working to tight tolerances Background in precision engineering, aerospace desirable You need to be someone who can get up to speed quickly and work without close supervision. Why take this contract : It is a straightforward role focused on supporting production. The work is already in place, and expectations are clear. You are there to contribute from day one and keep output moving. What you get: £20.00 to £21.00 per hour depending on experience Overtime available Immediate start 3-month contract with consistent work Interested? If this sounds like what you have been looking for, apply now or contact the Sheffield team on 01143 830 046. Verus Recruitment Partners are acting as a Recruitment Agency in relation to this vacancy and are an Equal Opportunities Employer. Keywords: CNC Machinist, CNC Miller, CNC Milling, Contract CNC Machinist, CNC Setter Operator, Fanuc, Precision Engineering, Aerospace, Manufacturing Sheffield, Engineering Drawings, Machining, Inspection, Production Engineering. TPBN1_UKTJ

Mould Shop Inspector Rotherham Shift Pattern: Days - Monday to Friday 6am - 2pm (37 hours per week) £35,000 - £36,000 An established manufacturing organisation is seeking an experienced Mould Shop Inspector to join its technical operations team. This role plays a key part in ensuring mould tools and equipment meet quality, safety, and production standards. The Role Reporting to the Mould Shop Manager, the successful candidate will be responsible for inspecting mould equipment before, during, and after production runs, accurately recording findings, and supporting continuous improvement across inspection processes. Key Responsibilities Inspect mould equipment for wear, damage, and compliance following production runs Record inspection results and equipment condition using a digital system Liaise with internal coordinators regarding repair and refurbishment requirements Inspect new mould tooling and samples prior to release into production Support repair and refurbishment activities with inspection guidance Carry out off-displacement and in-process displacement checks where applicable Maintain calibration and correct use of inspection equipment Create, update, and manage inspection documentation and data sheets Support colleagues with the correct use of inspection equipment Assist in developing and improving inspection procedures and controls Comply with all Health & Safety and quality standards Undertake other reasonable duties within skill level as required Essential Skills & Experience Experience reading and interpreting engineering drawings Confident using calibrated inspection equipment (e.g. callipers, micrometres) Good IT skills, including Microsoft Excel and Word Methodical, organised, and detail-focused approach to work Experience using CMM inspection equipment Familiarity with 3D models Background in data management within a manufacturing or engineering environment Professional, motivated, and results-driven Strong attention to detail and analytical thinking Able to work under pressure and meet deadlines Confident communicator with good interpersonal skills Flexible, adaptable, and open to change Positive 'can-do' attitude with a willingness to take ownership Proactive in identifying and suggesting improvements Committed to promoting Health & Safety and quality standards What's on Offer Stable, full-time, weekday role Supportive working environment Opportunity to be involved in ongoing process improvement Competitive salary dependent on experience TPBN1_UKTJ

Inspector / Machinist Salary: £17.70 per hour plus shift allowance at 12.5% Hours: 37.5 hours per week Shifts: Rotational shifts: Days & Afternoons Location: Sheffield, S9 Contract: Full-Time | Permanent The Role: We're looking for a highly detail-focused Inspector / Machinist to support inspection and CNC machining processes, ensuring all products meet strict medical and customer specifications. Key Responsibilities: Perform visual and dimensional inspections Complete DIR reports and OGP scanning Use precision measuring equipment (callipers, verniers, micrometers) Record results accurately in Excel and internal systems Reject and quarantine non-conforming product Set, load, and operate CNC machines Verify parts against engineering drawings and tolerances Complete route cards, inspection sheets, and traceability documentation Escalate quality or machine issues promptly Support Lean, 5S, and EHS initiatives Essential Criteria: Proven experience in CNC machining and/or inspection Strong ability to use measurement tools (verniers, callipers, micrometres) Ability to read and interpret engineering drawings & GD&T Experience working to tight tolerances Good working knowledge of quality control processes Competent in Microsoft Excel and basic IT systems Strong attention to detail and problem-solving ability Desirable Criteria: Experience within medical device, aerospace, or other regulated industries Familiarity with OGP / CMM inspection equipment Knowledge of ISO 13485 or similar quality standards Previous experience with traceability and batch control Understanding of Lean Manufacturing / Continuous Improvement Apprenticeship or relevant engineering qualification (NVQ Level 2/3 or equivalent) Behavioural & Performance Criteria: Demonstrates a 'right first time' quality mind set Strong accountability and ownership of work Ability to work independently and as part of a team Effective communication skills across departments Flexible approach to shift work and production demands Commitment to health, safety, and compliance standards Why Apply? Competitive hourly rate with structured shifts Join a globally recognised manufacturer Work on life-changing products Clear pathway to develop within precision engineering & quality TPBN1_UKTJ

Welding Inspector (Weekend Shift, 3 Day Week – PCN Level 2) Location: Rotherham Salary: £17.51 per hour (circa £31,412.94 per annum based on 34.5 hours) Contract: Full-time, permanent Hours: Friday to Sunday, 6:00am to 6:00pm Most people still work five days. This role doesn't. You work Friday to Sunday, then you're off for four full days before starting again. If you're used to a full working week, this is just a different way of structuring it. Same type of work, just with more time away from it. In most fabrication environments, inspection only happens at the end of the process. By that point, issues are harder to resolve and quality can suffer, leaving inspectors picking up problems rather than preventing them. This role is different. You will be involved throughout the fabrication process, helping maintain standards as work moves through production rather than checking it after the fact. The work is consistent, expectations are clear, and you're there to maintain standards rather than firefight problems. You will be working in a large, well-established manufacturing facility in Rotherham, supporting fabrication across sectors including defence, rail and heavy engineering. What the role looks like day to day: You will be on the shop floor and in the documentation, checking weld quality, reviewing procedures and supporting fabrication teams to keep everything to standard. What you will be doing: Monitoring QA and QC activities across fabrication Reviewing WPS, PQR and WPQ documentation Carrying out visual weld inspections and dimensional checks Reviewing and endorsing NDT reports Supporting welding teams with technical advice Prescribing and monitoring weld repairs Verifying correct use of NDT methods Completing inspection records and documentation Reviewing inspection and test plans and final fabrication packs What they are looking for: PCN Welding Inspector Level 2 or equivalent is essential PCN Level 2 MPI or DPI is preferred Experience in welding inspection within fabrication Understanding of QA and QC processes Comfortable working on the shop floor and with documentation Good communication skills and attention to detail IT literate including Microsoft Office You will be comfortable taking responsibility for quality and working without constant supervision. What you get: £17.51 per hour 3-day working week with 4 days off every week 33 days holiday including bank holidays Company pension Life assurance Healthcare plan Free on-site parking Reduced gym and Costco membership Referral bonus scheme Ongoing training and development For more information, please get in touch with our Sheffield Team on 01143 830 046. Verus Recruitment Partners are acting as a Recruitment Agency in relation to this vacancy and are an Equal Opportunities Employer. Keywords: Welding Inspector, Weld Inspector, NDT Inspector, PCN Level 2, MPI, DPI, Fabrication Inspection, QA QC, Manufacturing Rotherham, Weekend Jobs, Engineering Inspection TPBN1_UKTJ