Quality inspection jobs in BoltonCreate job alerts

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester for a time served ELECTRICAL FITTER. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives Suitable candidates MUST hold time served apprenticeship, any candidates without apprenticeship WILL NOT be considered Specific responsibilities include: • Certify the product in line with Product Certification procedure, • Demonstrated ability / willingness to certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Possess a versatile skill base with the capability to apply these skills across a range of tasks, • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection and where relevant test times are met., • Check and complete all paperwork associated with the manufacturing data pack, • Maintain to the highest level, workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process, • Maintain a safe working environment, • Maintain a good housekeeping policy, • Willing to contribute to an environment of process improvement Role requirements (skills, training and qualifications) Essential: • Engineering/ craft apprenticeship ESSENTIAL, • Possess experience in electrical wiring and assembly, • Electrical fitting experience Desirable: • IPC 610 certified/ trained preferred, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: • Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity., • Design, commission, and validate the necessary tooling for production processes., • Support industrial validation activities, including FMEA and First Article Inspection (FAI)., • Diagnose and resolve technical issues encountered during manufacturing., • Update route cards to reflect changes resulting from rework activities., • Manage configuration control by incorporating design modifications into manufacturing documentation., • Assist with the Non-Conformance process, utilising SAP for tracking and resolution. What do you need?:Qualification Requirements: • Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard "or" • Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) "and" • Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved, • (These qualifications must meet the standard to be considered for the role)., • "or", • BEng Degree in a relevant Engineering subject. Skill Requirements: • Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators., • Proven experience in electronic sub-assembly manufacturing through to full system builds., • Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems., • Strong team player with the ability to collaborate and contribute effectively within a group environment., • Ability to understand and respond to customer requirements., • Familiarity with and adherence to company processes and procedures., • Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the roleFor more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Our client has an opportunity for an Electrical Inspector to join them on a 12 month contract. Role: Electrical Inspector Location: Bolton - fully onsite Clearance: BPSS required to start Hourly Rate: £28.35 per hour via Umbrella, inside IR35 What you'll be doing: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical damage. Intermediate inspection checks for non-Product Certification activities. Monitoring of operators within the Product Certification Scheme. Check, complete and certify all paperwork associated with the manufacturing data pack. Control of non-conforming items. Raise and maintain relevant data records/non-conformance reports. Produce relevant inspection/quality control documentation/history sheets. Care for and use specialised inspection tools. Maintain product certification and approval via regular audits. Ensure compliance with all associated procedures applicable to the manufacturing process. Ensure inspection times are met. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Maintain to the highest level, workmanship standa...

Electrical Fitter 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Certify the product in line with Product Certification procedure, • Certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection, and where relevant test times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process Trade Certificates: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Your skillset may include: • IPC 610 certified/ trained preferred, • Possess experience in electrical wiring and assembly, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Electrical Inspector Defence ManufacturingLocation: Bolton, Greater Manchester We are supporting a leading UK Defence manufacturing organisation in their search for an experienced Electrical Inspector to join an established production and certification team. This is a hands-on inspection role, focused on electrical builds, cable assemblies and wiring, working to IPC-610 and IPC-620 standards within a regulated, high-quality manufacturing environment. If you enjoy technical inspection, clear standards, and pride yourself on quality workmanship, this role offers long-term, stable defence work with overtime available. What Youll Be Doing • Certifying electrical products in line with approved processes and procedures, • Inspecting electrical connections, cable assemblies, harnesses and finished builds, • Identifying faults, damage, surface defects and non-conformances

An established engineering and manufacturing organisation is seeking a Quality & Environmental Coordinator to support the successful delivery of major infrastructure projects. The role focuses on managing project quality documentation, inspection records, handover packs and environmental reporting, ensuring all submissions meet strict client, contractual and compliance requirements within regulated project environments. Key Responsibilities Manage project quality deliverables, ensuring all documentation is issued accurately and in line with contractual deadlines. Develop and maintain Manufacturing Inspection & Test Plans (MITPs/ITPs) and coordinate inspection requirements with internal teams and suppliers. Compile and control quality records, material certification, traceability documentation and final handover packs. Support audits, NCR closure activities and client documentation reviews to ensure project compliance. Monitor and report environmental data, supporting continuous improvement and sustainability objectives across the project.Requirements: Proven experience in Quality for an Engineering, Manufacturing, Rail or Infrastructure business. Experience working with ITPs, NCRs, NDT records, quality plans. Excellent document control skills. Ability to interpret drawings and specifications. Location: Bolton Permanent, Full Time Working Hours: Monday-Friday, 37 hours per week. Salary: £40k - £50k Must be Eligib...

We’re looking for an experienced Project Quality & Environmental Deliverables Coordinator to join a leading organisation delivering key infrastructure projects on a 6 month fixed term contract. Based on-site full-time, this role is ideal for someone with a strong background in managing project quality documentation within engineering or manufacturing environments. You’ll play a critical part in ensuring all deliverables meet client and project standards while supporting environmental compliance. Salary £40,000 – £50,000 per annum (depending on experience) Location and Working Pattern On-site, 5 days per week (37 hours): Monday to Thursday: 8:00 am – 5:00 pm Friday: 8:00 am – 12:00 noonResponsibilities Own and manage the HS2 project quality deliverables plan/register, ensuring all quality documentation is produced and submitted accurately and on schedule. Attend and contribute to internal and client meetings, including progress and readiness reviews. Develop and maintain Manufacturing Inspection & Test Plans (MITPs/ITPs) aligned with specifications and project requirements. Coordinate quality documentation and material acceptance records, ensuring traceability and compliance. Prepare and deliver final handover documentation packs, including O&M manuals, to client-approved formats. Manage document control activities for HS2 deliverables, maintaining version control and traceability. Supp...

Looking for an opportunity to make a significant impact on a major UK infrastructure project? This is your chance to join a forward-thinking company as a Project Quality & Environmental Deliverables Coordinator, where your skills and expertise will drive success on one of the most ambitious engineering projects in the country. This company offers a collaborative and innovative environment, ensuring your career development while contributing to meaningful work that shapes the future. What You Will Do: - Manage and maintain project quality documentation, ensuring all deliverables meet client and project requirements with precision and timeliness. - Develop, review, and control Manufacturing Inspection & Test Plans (MITPs/ITPs), incorporating inspection criteria, acceptance standards, and witness points. - Coordinate inputs from multiple departments, including Engineering, Procurement, and Production, to ensure quality deliverables align with specifications. - Compile and oversee material acceptance documentation, ensuring traceability to drawings, purchase orders, and installed items. - Produce and organise Operating & Maintenance manuals and final handover documentation, ensuring client acceptance and compliance. - Support environmental requirements by collecting and reporting data, proactively identifying opportunities for improvement to reduce environmental impacts. What You Will Bring: - Proven experience managing qu...

An established engineering and manufacturing organisation is seeking a Quality & Environmental Coordinator to support the successful delivery of major infrastructure projects. The role focuses on managing project quality documentation, inspection records, handover packs and environmental reporting, ensuring all submissions meet strict client, contractual and compliance requirements within regulated project environments. Key Responsibilities • Manage project quality deliverables, ensuring all documentation is issued accurately and in line with contractual deadlines., • Develop and maintain Manufacturing Inspection & Test Plans (MITPs/ITPs) and coordinate inspection requirements with internal teams and suppliers., • Compile and control quality records, material certification, traceability documentation and final handover packs., • Support audits, NCR closure activities and client documentation reviews to ensure project compliance., • Monitor and report environmental data, supporting continuous improvement and sustainability objectives across the project. Requirements: • Proven experience in Quality for an Engineering, Manufacturing, Rail or Infrastructure business., • Experience working with ITPs, NCRs, NDT records, quality plans., • Excellent document control skills., • Ability to interpret drawings and specifications.

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Fitter Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS Responsibilities: Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. W...

CMM Operator Quality Inspector (Night Shift) A skilled CMM Operator / Quality Inspector is responsible for verifying that manufactured components meet required engineering drawings, specifications, and quality standards. This role supports production by performing accurate inspections, maintaining quality documentation, and ensuring compliance with safety, environmental, and regulatory requirements. Key Responsibilities Carry out all duties in accordance with Health & Safety, Environmental, and Quality procedures, maintaining a safe and organised 5S work area. Provide support and communication between quality, engineering, and production teams to resolve inspection or quality-related issues. Work to inspection priorities to support production schedules and customer delivery requirements. Perform first-off, in-process, subcontract, and final inspections using appropriate inspection techniques including: Operate existing CMM inspection programs using appropriate software to verify that components meet drawing requirements, GD&T specifications, and customer standards. Ensure correct datums, alignments, probing routines, and measurement sequences are used during inspectio...

Are you a Mechanical or Metrology focused Engineer with hands on calibration and CMM experience? As a trusted UK Ministry of Defence partner, MBDA is seeking a Mechanical Engineer to join its Calibration & Metrology team in Bolton. This is a technically engaging role supporting manufacturing across assembly, integration and test, working closely with production, quality and engineering teams to ensure measurement accuracy and equipment performance at every stage of the build process. What youll be doing • Deliver hands on mechanical calibration support for COTS (Commercial Off The Shelf) and Special to Type Test Equipment (STTE), • Calibrate torque tools in line with ISO 6789 2:2017, • Support CMM inspection activities, including operating and updating measurement programmes, • Provide day to day metrology and measurement support to manufacturing teams, fixtures and tooling, • Act as a technical point of contact for measurement related queries on the shop floor, • ...

My client is looking for several Electrical Test Operators to join them on an initial 12-month basis. As the Electrical Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Test Operator Pay: £28.35 per hour via Umbrella (rising to £29.70) Location: Bolton Contract: 12 Months (possible extension) Hours: Monday - Friday, 37 hours per week Security Clearance: Security Clearance required however can start on BPSS Responsibilities: Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant, test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members.Skillse...

Employment Solutions have an exciting opportunity for a Manual Vertical Borer within a rapidly growing engineering company specialising in precision Engineering. Based in Bolton The role will involve overseeing smooth machining operations, promoting cross-training across the workshop, and supporting the development of team members to enhance overall productivity and skill levels. Machine Operation: Setting up and operating large capacity vertical boring machines. Technical Work: Interpreting complex engineering drawings, blueprints, and work orders to produce precise, large-scale components. Machining Processes: Carrying out, facing, edging, and boring operations, along with setting up PCDs (Pitch Circle Diameters) for flange tapping. Quality Control: Conducting self-inspection of finished parts using precision measurement equipment to meet, or exceed, specified tolerances. Maintenance: Maintaining a clean and organized work area, adhering strictly to health and safety procedures, and performing routine machine checks. Reporting directly to the Workshop Manager this is an excellent opportunity to be involved with a dynamic company and to build on future opportunities within our growing business. In return you'll receive a salary up to £19.91 per hour (UMBRELLA) 37.5 hour working week Monday to Friday days - 8am till 4.30pm Finish at 3.30pm on a Friday Please get in touch for immediate interview - (url removed) (pho...

Quality Engineer About the Company Our client is a well-established precision engineering organisation operating within the aerospace sector. The business specialises in the manufacture of complex components for both civil and defence applications and has built a strong reputation for quality, reliability, and continuous improvement. Due to ongoing growth, they are seeking an experienced Quality Engineer to join their team. The Role This position will play a key role in ensuring that all products meet stringent aerospace quality standards. You will be responsible for maintaining and improving quality systems, supporting production, and driving continuous improvement across the business. Key Responsibilities • Develop, implement, and maintain quality assurance procedures and control plans, • Perform inspection and verification of materials, components, and finished products, • Investigate non-conformances and lead root cause analysis with corrective actions, • Ensure compliance with aerospace standards and customer requirements, • Collaborate with engineering, production, and supply chain teams to embed quality processes, • Conduct internal and supplier audits, supporting supplier performance improvements, • Maintain...

Project Quality Coordinator Bolton £40,000 - £50,000 Our long-standing client is looking to appoint a Project Quality Coordinator to support major engineering and infrastructure projects within a highly regulated manufacturing environment. This role will focus on managing project quality documentation, inspection records, material certification, O&M manuals, and final handover documentation in line with client and project requirements. You will work closely with Engineering, Production, Procurement, Quality, and suppliers to ensure documentation is accurate, controlled, traceable, and delivered within project timelines. Key Responsibilities • Manage project quality documentation and submission schedules, • Maintain MITPs / ITPs and inspection records, • Compile QA dossiers, material certification, and handover packs, • Coordinate O&M manuals and as-built documentation, • Manage document control, revisions, and client submissions, • Support audits, NCR closure, and compliance activities, • Assist with environmental reporting and continuous improvement initiatives Requirements • Experience managing quality/project documentation within engineering or manufacturing, • Experience with MITPs / ITPs, QA documentation, and handover packs, • Strong document control and organisational skills, • Ability to interpret engineering...

CMM Operator – Quality Inspector (Night Shift) *NIGHT SHIFT ONLY A skilled CMM Operator / Quality Inspector is responsible for verifying that manufactured components meet required engineering drawings, specifications, and quality standards. This role supports production by performing accurate inspections, maintaining quality documentation, and ensuring compliance with safety, environmental, and regulatory requirements. Key Responsibilities Carry out all duties in accordance with Health & Safety, Environmental, and Quality procedures, maintaining a safe and organised 5S work area. Provide support and communication between quality, engineering, and production teams to resolve inspection or quality-related issues. Work to inspection priorities to support production schedules and customer delivery requirements. Perform first-off, in-process, subcontract, and final inspections using appropriate inspection techniques including: Operate existing CMM inspection programs using appropriate software to verify that components meet drawing requirements, GD&T specifications, and customer standards. Ensure correct datums, alignments, probing routines, and measurement sequences are used during inspection to achieve consistent and repeatable measurement results. Confirm that drawings, CAD models, specifications, batch documentation, SOPs, and inspection program revisions match...

An established engineering and manufacturing organisation is seeking a Quality & Environmental Coordinator to support the successful delivery of major infrastructure projects. The role focuses on managing project quality documentation, inspection records, handover packs and environmental reporting, ensuring all submissions meet strict client, contractual and compliance requirements within regulated project environments. Key Responsibilities • Manage project quality deliverables, ensuring all documentation is issued accurately and in line with contractual deadlines., • Develop and maintain Manufacturing Inspection & Test Plans (MITPs/ITPs) and coordinate inspection requirements with internal teams and suppliers., • Compile and control quality records, material certification, traceability documentation and final handover packs., • Support audits, NCR closure activities and client documentation reviews to ensure project compliance., • Monitor and report environmental data, supporting continuous improvement and sustainability objectives across the project. Requirements: • Proven experience in Quality for an Engineering, Manufacturing, Rail or Infrastructure business., • Experience working with ITPs, NCRs, NDT records, quality plans., • Excellent document control skills., • Ability to interpret drawings and specifications. Location: Bolton Permanent, Full Time Working Hours: Monday-Friday, 37 hours per week. Salary: £40k - £50k Must be Eligible for Security Clearance Benefits: • 25 days Holidays* + Bank Holidays, • Service days, • Sick pay, • Pension – 5% EE / 5% ER (combined 10% or above), • Professional memberships, • Life Assurance, • Healthcare package, • Occupational Health, • Free Eye Tests, • Mental Health Support, • Bonus Scheme APPLY NOW and feel free to contact Jacob at 0161 4166249 or via email at jacob@emp-sol.com.

Join our team as an Electrician Were looking for a skilled and customer-focused Electrician to join our Gas & Electrics team. Youll play a vital role in delivering a responsive repairs and maintenance service, helping to ensure our customers live in safe, compliant and well-maintained homes. This is a great opportunity to use your technical expertise to make a real difference in our communities, working alongside a supportive team that puts safety, quality and customers first. Key Responsibilities • Carry out electrical installation, repair and maintenance works in our homes., • Diagnose faults and repair domestic electrical installations and appliances., • Undertake complete rewires, meter works and appliance installations., • Complete inspection, testing and detailed Electrical Installation Condition Reports., • Use digital scheduling systems (e.g. PDA/mobile devices) to receive and complete work, ensuring accurate records are maintained., • Work collaboratively with other trades, colleagues, contractors and external partners., • Communicate clearly with customers about required works, timescales and completed repairs, in line with our Repairs Policy., • Act as a professional representative of Be One Homes when working in properties and on estates., • Identify, report and share learning from Health & Safety issues., • Promote Equality, ...

Fire Risk Assessor Total Fire, part of the Ranger Group, is expanding and we’re looking for skilled Fire Risk Assessors to join one of the North West’s most respected, UKAS-accredited fire safety consultancies. If you’re driven by high standards, professional pride, and genuine career progression, you’ll feel right at home here. Whether you are at foundation (tier 1) level or advanced (tier 3), we'd love to accomodate you with you're next career move to join one of our ever expanding businesses. What You’ll Bring Fire Service or fire safety inspection background, with Fire Service College modules (or equivalent). Minimum Level 3/4 Fire Safety Diploma (or equivalent). Ideally holding recognised industry qualifications: fire safety–related degree, MIFireE, MIFSM, EngTech, HNC/HND. Registration with IFE or IFSM (NAFRAR) is a strong advantage. Demonstrable experience producing high-quality fire risk assessments across varied premises. Excellent report writing, analytical ability, and attention to detail. Strong IT skills—our assessments are completed via a Fire Risk Management Web Portal. Essential knowledge of social housing fire safety, including Purpose-Built Flats Guidance and Specialized Housing Guidance. What You’ll Do Deliver comprehensive, high-quality fire risk assessments. Manage your own workload, deadlines, a...

An established engineering and manufacturing organisation is seeking a Quality & Environmental Coordinator to support the successful delivery of major infrastructure projects.The role focuses on managing project quality documentation, inspection records, handover pa

Quality Inspector| Engineering | Manufacturing | Bury St Edmund's, Suffolk | Negotiable Salary (DOE) + Benefits Are you an experienced in Quality Inspection looking to play a key role in ensuring product quality within a busy engineering environment? We are currently recruiting for a Quality Technic

Jonathan Lee is seeking a Project Quality & Environmental Deliverables Coordinator for a major infrastructure project in the UK. The role includes managing project quality documentation, developing Manufacturing Inspection & Test Plans, and coordinating across multiple departments. The ideal candida

Energy Jobline CVL is seeking an Electrical Inspector for a 12-month contract in Bolton. The role involves ensuring quality standards for electrical components, completing certifications, and overseeing inspection processes.

Circa £43,000 depending on experience Minimum of 4 days per week on-site due to workload classification British Citizen only. After offer, candidates must undergo HMG Basic Personnel Security Standard checks (BPSS) managed by the MBDA Personnel Security Team. • Company bonus: Up to £2,500 (based on company performance and will vary year to year), • Pension: Maximum total (employer + employee) contribution of up to 14%, • Overtime: Opportunity for paid overtime, • Flexi Leave: Up to 15 additional days, • Flexible working: We welcome applicants seeking flexible working arrangements, • Enhanced parental leave: Up to 26 weeks for maternity, adoption and shared parental leave – enhancements available for paternity leave, neonatal leave and fertility testing and treatments, • Healthcare Cash Plan: Option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more, • Facilities: Fantastic site facilities including subsidised meals, free car parking and more As a Process Engineer, you will work as part of the Printed Circuit Card Assembly (PCBA) manufacturing business unit with a focus on the manufacture of our products. The Circuit Card Assembly (CCA) Business unit produces high‑complexity products with a high mix, low volume output. The business unit is rapidly growing to meet a large backlog of orders over the next 5‑10 years, with production outputs more than tripling. You will be part of the process engineering team working closely with test, manufacturing and quality engineers while building strong relationships with stakeholders including operations, design support and calibration and maintenance teams. This role reports to the Principal Process Engineer within the CCA business unit. You will be responsible for various technical aspects of PCBA. This will involve creating and maintaining standards, identifying and carrying out continuous improvement activities, solving technical problems, all whilst considering quality as intrinsic to the role. The opportunity also allows you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future are some of the work packages that can provide stretch objectives for such growth. • Supporting the manufacturing area in its growth and rate increase., • Carrying out improvement activities – data gathering and analysis to understand impact and effort required., • Supporting the Non‑Conformance process – root cause analyses, implementation of effective corrective and preventative actions., • Interface with the design authority during the product development phase to ensure optimised Design for Manufacture (DfM) and in the production phase for management of change implementation. This includes supporting the New Product Introduction team in creating/improving design rules for manufacturability of circuit cards., • Ensuring processes and equipment contribute to a safe working environment following both company processes and legal obligations, meeting internal quality requirements., • Developing and maintaining manufacturing methods, processes and equipment with a data‑based approach, using methods such as SPC, to support a robust manufacturing system., • Resolving issues and queries with the operations team on the shop floor., • Performing and reviewing PFMEAs., • Developing tooling to aid the manufacturing process., • Creating and modifying machine programmes for the assembly, manufacture or inspection of circuit cards., • An understanding and appreciation for quality control., • Analytical mindset with the willingness to learn., • Proficiency in computer and internet use, including commonly used applications such as Microsoft Office Suite and manufacturing systems such as ERP and Manufacturing Execution System., • Experience in Circuit Card Manufacturing or Design is beneficial., • Knowledge of PCBA Processes and Technologies is beneficial., • A proactive approach to process improvements., • Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21, • Formal further education certificate to HND or equivalent in a relevant subject, • BEng/BSc in relevant Engineering/Technical Degree #J-18808-Ljbffr

Manufacturing Engineer (Assembly / Electro-Mechanical Integration) Location: Bolton Sector: Defence / Advanced Manufacturing About the role Were looking for a Manufacturing Engineer to support the assembly and integration of complex electro-mechanical products , working across unit build through to full system integration. Youll be hands-on in a highly regulated, low-volume manufacturing environment, translating engineering designs into clear, repeatable manufacturing processes and supporting production to deliver right-first-time builds across multiple programmes. This role sits at the intersection of engineering, production and quality , offering exposure to technically challenging products and structured manufacturing practices. What youll be doing Supporting electro-mechanical and electronic sub-assembly through to full system builds Troubleshooting and resolving manufacturing issues on the shop floor Developing, commissioning and validating tooling and fixtures to support production Supporting industrial validation activities, including FMEA and First Article Inspection Translating design intent into clear Manufacturing Instructions and build documentation Maintaining route cards and supporting rework and configuration changes Supporting Non-Conformance activity, including investigation and resolution using SAP What were looking for Engineering background Youll have a recognised engineering qualification gained through one of the following routes : Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) OR Degree in a relevant Engineering discipline Equivalent or combined qualifications gained through industry experience will also be considered. Skills & experience Experience producing clear Manufacturing or Build Instructions for operators Background supporting electro-mechanical or electronic assemblies in a manufacturing environment Hands-on knowledge of assembly processes, ideally involving small or miniature mechanisms Experience working in a structured or regulated manufacturing environment Strong communication skills and ability to collaborate across engineering, production and quality Comfortable working to defined processes, procedures and configuration control What happens now? If your application meets the initial selection criteria, a member of our talent acquisition team will contact you via email to arrange a structured screening call. This conversation will explore your experience, technical background, and suitability for the role in more detail. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

World Class Defence Organisation based in Bolton is currently looking to recruit a Goods Inwards Inspector Subcontractor on an initial 12 month contract. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph rising to £29.70ph after 12 weeks (Umbrella). Overtime: hours worked over 37 hours per week is paid at time and a half. Goods Inwards Inspector Job Description: The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: The successful candidate should be a team player who is able to demonstrate customer focus. They should be adaptable to any work-related processes and working practices. Goods Inwards Inspection / Quality Inspection background Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. SAP literate is desirable

An opportunity has become available at the MBDA UK Bolton site to work as part of a team of experienced engineers to support the increasing product delivery requirements, maintaining and improving processes and standards to achieve this. Salary: Circa £43,000 depending on experience Dynamic (hybrid) working: Minimum of 4 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As a Process Engineer, you will work as part of the Printed Circuit Card Assembly (PCBA) manufacturing business unit with a focus on the manufacture of our products. The Circuit Card Assembly (CCA) Business unit produces high complexity products with a high mix, low volume output. The business unit is rapidly growing in order to achieve the large backlog of orders over the next 5-10 years, with the production output more than tripling. You will be a part of the process engineering team working closely with test, manufacturing and quality engineers whilst building strong relationships with stakeholders including the operations, design support and calibration and maintenance teams. This role reports to the Principal Process Engineer within the CCA business unit. The Role: You will be responsible for various technical aspects of PCBA. This will involve working on creating and maintaining standards, identifying and carrying out continuous improvement activities, solving technical problems, all whilst considering quality as intrinsic to the role. The opportunity also allows you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future are some of the work packages that can provide stretch objectives for such growth. Key Responsibilities: Supporting the manufacturing area in its growth and rate increase. Carrying out improvement activities - data gathering and data analyses to understand impact and effort required. Support the Non-Conformance process - root cause analyses, implementation of effective corrective and preventative actions. Interface with the design authority during the product development phase to ensure optimised Design for Manufacture (DfM), and in the production phase for management of change implementation. This includes supporting the New Product Introduction team in creating/improving design rules for manufacturability of circuit cards. Ensure processes and equipment contribute to a safe working environment following both company processes and legal obligations, meeting internal quality requirements. Develop and maintain manufacturing methods, processes and equipment with a data-based approach, using methods such as SPC, to support a robust manufacturing system. Resolve issues and queries with the operations team on the shop floor. Perform and review PFMEAs. Develop tooling to aid the manufacturing process. Create and modify machine programmes for the assembly, manufacture or inspection of circuit cards.What we're looking for from you: An understanding and appreciation for quality control. Analytical mindset with the willingness to learn. Proficient in computer and internet use, including proficiency in commonly used applications such as Microsoft Office Suite & manufacturing systems such as: ERP systems, Manufacturing Execution System etc. Experience in Circuit Card Manufacturing or Design is beneficial. Knowledge of PCBA Processes and Technologies is beneficial. A proactive approach to process improvements. QUALIFICATIONS (Must Have) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 Formal further education certificate to HND or equivalent in a relevant subjectALTERNATIVELY BEng/BSc in relevant Engineering/Technical DegreeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Electrical Calibration Technician Electrical Test Equipment (Defence) Are you an Electrical Calibration Technician with hands on experience calibrating electrical and electronic test equipment such as multimeters, oscilloscopes and power supplies? Guidant Global is partnering with a leading UK defence organisation to recruit an Electrical Calibration Technician to support the calibration and maintenance of Commercial Off The Shelf (COTS) and Special to Type Test Equipment (STTE) used within a highly regulated, safety critical manufacturing environment. This is an excellent opportunity to work on technically challenging equipment that directly supports critical defence programmes. Key Responsibilities: Calibrating and maintaining electrical and electronic test equipment, including multimeters, oscilloscopes, power supplies and function generators Carrying out initial and routine calibration of COTS and bespoke Special to Type Test Equipment (STTE) Ensuring factory and proprietary test equipment remains compliant with documented procedures Completing calibration, maintenance and repair activities in line with departmental processes Producing accurate, traceable calibration and maintenance records to support audit and quality requirements Working collaboratively within a multi disciplined Operations and Engineering environment What do you need?: Qualifications (Essential Pathways) You must hold one of the following: Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) If you have strong, relevant calibration experience in a regulated or manufacturing environment and are unsure on qualification alignment, applications are encouraged for discussion. Technical experience & skills Experience calibrating electrical test equipment (e.g. power supplies, multimeters, oscilloscopes, function generators) Exposure to calibration of COTS and/or bespoke test equipment Ability to produce clear, comprehensive calibration and maintenance documentation Understanding of in service inspection and testing of electrical equipment Experience working with Environmental Stress Screening (ESS) facilities is desirable Comfortable following manufacturer instructions, procedures and quality standards Familiarity with SAP or similar systems is beneficial (not essential) What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract. Experience with inspecting the work of other people is essential. Job Title: Electrical Inspector Rate: £28.35 rising to £29.70 after 12 weeks Location: Bolton Hybrid / Remote working: Onsite. Standard Days, not shift work Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week are paid at ‘time and a half’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Electrical Inspector Job Description: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical damage. Intermediate inspection checks for non-Product Certification activities. Monitoring of operators within the Product Certification Scheme. Check, complete and certify all paperwork associated with the manufacturing data pack. Control of non-conforming items. Raise and maintain relevant data records/non-conformance reports. Produce relevant inspection/quality control documentation/history sheets. Care for and use specialised inspection tools. Maintain product certification and approval via regular audits. Ensure compliance with all associated procedures applicable to the manufacturing process. Ensure inspection times are met. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Maintain to the highest level, workmanship standards and product quality. Willing to contribute to an environment of process improvement. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC. Several years, experience as a skilled person. IPC 610 & IPC 620 certified / trained preferred. Manual handling training. ESD Training. No colour blindness. Role requirements (skills, training and qualifications) Electrical apprenticeship to one of the following levels Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3Vocational NVQ3 with Further Education, BTEC ONC/HNC

Role: Project Quality & Environmental Deliverables Coordinator Location: Bolton Salary: £40-50k (Depending on Experience) 5 days per week Mon – Fri, 37 hours in the offices (Typically 8-5 Mon – Thurs and 8 – 12 noon Friday) About the Role We are looking for a highly organised and detail-driven Project Quality & Environmental Deliverables Coordinator to support the successful delivery of major HS2 projects. This is a key role ensuring all project quality documentation, records, and deliverables are produced, controlled, and submitted in line with strict client requirements and timelines. You will play a central part in coordinating quality documentation and supporting environmental reporting, helping to ensure compliance and drive continuous improvement across the project lifecycle. Key Responsibilities • Manage and maintain the project quality deliverables plan/register, ensuring all submissions are completed accurately and on time, • Lead the development and control of MITPs / ITPs, including inspection stages, acceptance criteria, and hold/witness points, • Coordinate inputs from engineering, procurement, suppliers, and production teams to ensure full compliance with client requirements, • Compile and manage inspection records, material certifications, traceability documentation, and test reports, • Produce and coordinate O&M manuals and final handover documentation, • Prepare and issue final documentation packs (QA dossiers, MDR/Data Books) ensuring correct formatting, indexing, and revision control, • Manage document control processes, including transmittals, revisions, approvals, and comment resolution, • Support the closure of NCRs, defects, and punch lists through documentation and evidence coordination, • Participate in internal and client meetings, driving actions and ensuring completion, • Support audits (internal, client, third-party) by demonstrating compliance and tracking actions Environmental Responsibilities • Collect and report environmental data including embodied carbon / EPD information, • Ensure environmental requirements are integrated into project deliverables, • Identify opportunities to reduce waste, improve efficiency, and minimise environmental impact About You Essential • Proven experience managing quality documentation and deliverables in engineering or manufacturing projects, • Strong experience developing and maintaining MITPs / ITPs, • Experience producing O&M manuals and handover documentation, • Knowledge of material certification, traceability, and QA documentation, • Strong document control skills with high attention to detail, • Ability to interpret technical drawings, specifications, and contractual requirements, • Excellent communication skills, confident working with clients and stakeholders, • Proficient in MS Office and document management systems, • Awareness of environmental reporting and compliance requirements Desirable • Experience working on HS2 or major UK infrastructure projects, • Knowledge of ISO 9001 / ISO 14001 standards, • Internal audit experience, • Experience with client document portals and formal submission processes, • Full UK driving licence **You must be a British National due to the security projects they you be working on, as this is a stipulation of the client - No sponsorship available

Who are McHale Komatsu and why you should work with us At McHale Komatsu we are proud to be one of the largest construction equipment distributors in the UK. We supply some of the world’s most exciting and ground-breaking products including Intelligent Machine Control (iMC) and Hybrid Excavators reducing our customers fuel usage. We value our local community – with wanting to improve lives and minimising environmental impact being at the top of our lists. We are continuously building a culture where enthusiastic and motivated people (just like you!) can construct a life-long career, within a reputable brand. Known for our quality and innovation, we are regularly searching for talented individuals to join our diverse, and friendly team. Come and join us to make good products even better – we’d love to hear from you! About the role Background and details: You will be field based (Northwest) as part of our on-site presence, reporting into our Redditch Depot. You will be required to maintain and service Komatsu plant machinery whilst always maintaining safe working practices. In addition, ensuring that you provide our customers the best levels of service, through regular communication with both the customer and service office to update on progress throughout the set activity. Reporting to the Service Supervisor, this role is ideal for someone who is experienced with heavy plant and has great customer service skills. Duties and responsibilities: Attending customer’s sites to perform pre-planned preventative maintenance that includes but not limited to: Completing accurate and timely maintenance including Field Campaigns & KDPF replacement Completing the specified documentation (RAMS, Job sheets etc) Carry out a Walk Around Inspection post service on the unit to ensure the unit is operating to expected performance levels Identifying any parts required to carry out any additional work from Walk Around Inspection Keep the customer and your supervisor up to date on your estimated time of arrival following the receipt of the job instructions. Ensuring you register your arrival on site and undertake any site inductions as per the customer’s specific site requirements. Complete a dynamic site-specific risk assessment and method statement prior to commencing any work in line with company and site procedures. Complete all works to plan as agreed with the customer and the service office. Complete all job specific documentation relating to a standard service and campaign. Experience and Qualifications: Experience of working with Heavy plant and machinery Experience of working on customers sites H&S training carried out in PPE awareness and hand tools Experience of delivering excellent customer service Full driving licence Use of field-based maintenance tools and equipment Good communication skills Ability to problem solve and work under pressure Ability to work independently and on own initiative NVQ level 2 in plant maintenance or equivalent SPA and/or CSCS training - desirable IOSH training (H&S) - desirable IPAF training (MEWP, Harness & Telehandler) - desirable What we can offer you Competitive Salary Up to 27 days holiday linked to service, plus bank holidays and Christmas shutdown Employee Assistance Programme Pension Scheme Career development/progression Death in service benefit Company van

QA/ Validation Supervisor, Pharmaceutical Location: Greater Manchester (ONSITE ROLE) Salary: c£45,000 Hours: 37.5 hours per week (days) Additional: Company bonus (discretionary), company pension, ongoing professional development opportunities in a company that is growing. Russell Taylor is working with a well-established organisation operating within the pharmaceutical and life sciences sector, currently seeking a QA Supervisor to join their growing quality function. This is a newly created role offering the opportunity to lead a small team while remaining hands-on in quality systems and validation activities. The Role Reporting into the Head of Quality, you will be responsible for the day-to-day activities of the QA team, ensuring compliance with regulatory standards and the effective operation of the Quality Management System (QMS). This is a balanced position combining team leadership with technical QA and validation responsibilities including report writing and oversight of equipment and process validation activities. Lead, coach, and develop a team of QA professionals (team size approx. 7) • Ensure the QMS remains compliant, inspection-ready, and aligned with regulatory requirements • Oversee completion and quality of QA documentation including deviations, CAPAs, change controls, and reports • Support and participate in internal and external audits (regulatory, customer, supplier) • Drive continuous improvement initiatives across quality processes • Manage team performance, training, holiday planning, and absence monitoring • Act as a key point of contact for quality-related matters across the business • Contribute to validation activities (IQ/OQ/PQ) for equipment and processes • Ensure timely delivery of KPIs and departmental objectives The Person Proven experience within a GMP-regulated environment in a similar QA/ Validation role • Experience in equipment validations (writing reports), the ideal applicant will have process validation experience too • Previous line management or supervisory experience is essential • Strong working knowledge of Quality Management Systems (QMS) • Experience with internal audits is required; external audit exposure is advantageous • Ability to contribute to validation and technical documentation • Strong communication, organisation, and decision-making skills • High attention to detail with a proactive and resilient approach Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Project Quality Coordinator Bolton £40,000 - £50,000 Our long-standing client is looking to appoint a Project Quality Coordinator to support major engineering and infrastructure projects within a highly regulated manufacturing environment. This role will focus on managing project quality documentation, inspection records, material certification, O&M manuals, and final handover documentation in line with client and project requirements. You will work closely with Engineering, Production, Procurement, Quality, and suppliers to ensure documentation is accurate, controlled, traceable, and delivered within project timelines. Key Responsibilities Manage project quality documentation and submission schedules Maintain MITPs / ITPs and inspection records Compile QA dossiers, material certification, and handover packs Coordinate O&M manuals and as-built documentation Manage document control, revisions, and client submissions Support audits, NCR closure, and compliance activities Assist with environmental reporting and continuous improvement initiatives Requirements Experience managing quality/project documentation within engineering or manufacturing Experience with MITPs / ITPs, QA documentation, and handover packs Strong document control and organisational skills Ability to interpret engineering drawings and specifications Good communication and stakeholder management skills British National due to project/security requirements Desirable HS2 or infrastructure project experience ISO 9001 / ISO 14001 knowledge Internal audit experience Package £40,000 - £50,000 Monday Friday, 37 hours Early finish Friday Long-term opportunity within a regulated engineering environment If the role is of interest, feel free to contact Martin on 07467 346417 or simply apply to prompt a call back. TPBN1_UKTJ

Project Quality Coordinator Bolton £40,000 - £50,000 Our long-standing client is looking to appoint a Project Quality Coordinator to support major engineering and infrastructure projects within a highly regulated manufacturing environment. This role will focus on managing project quality documentation, inspection records, material certification, O&M manuals, and final handover documentation in line with client and project requirements. You will work closely with Engineering, Production, Procurement, Quality, and suppliers to ensure documentation is accurate, controlled, traceable, and delivered within project timelines. Key Responsibilities • Manage project quality documentation and submission schedules, • Maintain MITPs / ITPs and inspection records, • Compile QA dossiers, material certification, and handover packs, • Coordinate O&M manuals and as-built documentation, • Manage document control, revisions, and client submissions, • Support audits, NCR closure, and compliance activities, • Assist with environmental reporting and continuous improvement initiatives Requirements • Experience managing quality/project documentation within engineering or manufacturing, • Experience with MITPs / ITPs, QA documentation, and handover packs, • Strong document control and organisational skills, • Ability to interpret engineering drawings and specifications, • Good communication and stakeholder management skills, • British National due to project/security requirements Desirable • HS2 or infrastructure project experience, • ISO 9001 / ISO 14001 knowledge, • Internal audit experience Package • £40,000 - £50,000, • Monday – Friday, 37 hours, • Early finish Friday, • Long-term opportunity within a regulated engineering environment If the role is of interest, feel free to contact Martin on (phone number removed) or simply apply to prompt a call back

Project Manager - Electrical Projects Manchester £60,000 - £70,000 (DOE) Are you an experienced Project Manager with a background managing electrical projects and driving them through to completion? An opportunity has arisen for an experienced Project Manager with a background in electrical infrastructure to join a growing and forward thinking organisation. This role offers the chance to take ownership of a diverse portfolio of projects, including substations, EV infrastructure, and new electricity connections. You will be responsible for driving projects from inception through to completion, ensuring delivery is on time, within budget, and to the highest standards. Working a hybrid pattern, splitting time between the local office and site. You will play a key role in delivering critical infrastructure while building a long term career within a business that continues to invest in both its people and project pipeline. You will be stepping into a role where your decisions directly influence project success. You will be trusted to lead from the front, manage key relationships, and shape delivery strategies while benefiting from a supportive structure and clear progression opportunities. My client is a well established civil and utilities contractor operating across the North West, Wales, and Yorkshire. They deliver fully integrated design and build solutions across sectors including gas, water, power, telecoms, and street lighting. Working with major developers, housing providers, and commercial clients, they have built a strong reputation for reliability, technical expertise, and consistent project delivery. Responsibilities In this Project Manager role, you will take responsibility for the full lifecycle of electrical projects. You will be doing the following: §Leading multiple projects from planning through to completion §Developing and managing detailed project programmes §Coordinating teams, subcontractors, and supply chains §Overseeing site activity to ensure progress, safety, and quality standards are met §Acting as the key point of contact for clients and internal stakeholders §Streamlining operations by improving work flows and resolving delivery challenges §Ensuring compliance with industry regulations and internal quality expectations §Managing risks, budgets, and timelines to maintain project performance Criteria §Electrical background as a qualified electrician §Demonstrable experience delivering projects within electrical infrastructure §Strong organisational skills with the ability to manage multiple priorities §A solid understanding of quality assurance and inspection processes §Confident communication skills with the ability to influence stakeholders §The ability to work both remotely and on site as required §Full and clean driving license Salary §£60,000 - £70,000 (DOE) If you feel that you are right for this role technically, but the salary, location or seniority does not suit you specifically then please still feel free to send us your CV. We constantly recruit for roles very similar to this one at all levels UK Wide. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highways, Infrastructure & Transportation professionals keen to make their introductions for future months or years. Carrington West's Transmission & Distribution division is the fastest growing in the country, our specialist team has a combined over 100+ years' experience in this market. Please call Luke Shaw at Carrington West on (phone number removed) for more information. By applying for this position, you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third party clients specifically relevant to any roles you have applied for. If at any stage, you wish to withdraw your consent please contact us

Proactive Technical Limited in Abingdon is seeking a Quality Engineer to deliver quality engineering services with a focus on manufacturing quality control. The ideal candidate will have at least five years of experience and proficiency in inspection techniques and project management. Strong knowled

The operator will focus on operating X-ray inspection equipment to evaluate SMT PCB assemblies, identifying hidden defects that are not visible through standard inspections. Responsibilities include inspecting according to AS9102 standards, ensuring quality management compliance, and maintaining hig

The role involves maintaining quality standards through inspections of components and products, coordinating documentation, and managing non-conformity procedures. AVD Appoint is seeking a Quality Technician in Greater London. Candidates should have a minimum of 2 years of experience in quality role

NMB Minebea UK Ltd in Lincoln is looking for a Quality Control Supervisor to lead the Final Inspection team in aerospace manufacturing. The ideal candidate will have significant experience in quality control and inspection processes, capable of interpreting engineering drawings and maintaining compl

Costain Group is seeking a Nuclear Inspection Technician apprentice to perform vital inspections at suppliers' facilities for the nuclear industry. This role involves ensuring safety and quality standards while complying with environmental regulations.

NMB Minebea UK Ltd is looking for a Quality Inspection Supervisor to lead its Final Inspection team at the Lincoln facility. The ideal candidate will have experience in quality inspection, a strong understanding of aerospace standards, and a commitment to enhancing team performance. This role is piv

WSP in the UK & Ireland is seeking a Project Manager with a strong background in quality assurance and project management.

NMB Minebea UK Ltd in Lincoln is seeking a Quality Control Manager to lead its Final Inspection team. This role offers the chance to ensure quality leadership and achieve safety, quality, and delivery targets in aerospace manufacturing. The position requires a strong understanding of quality managem

Maintaining information in the Quality and Inspection Services (QIS) resource planner, risk and change registers. The role may be required to deputise for the Quality and Inspection Services (QIS) Head of Projects. Reviewing output from QIS activities, including quality reports.

AVD Appoint Ltd is seeking a Quality Technician based in Hounslow to ensure world-class quality standards through end-of-line inspections and oversee documentation checks.

The role involves managing resources, liaising with clients, and ensuring project deliverables meet quality standards. WSP in the UK & Ireland is seeking an experienced project manager to oversee project finance and quality assurance in Manchester.

This role involves supporting operational quality initiatives and ensuring inspection readiness through collaboration with Quality Assurance. Excellent communication and analytical skills are needed for effective coordination across cross-functional teams and reporting quality metrics. Syneos Health