Trabajos soldering en Reino Unido

Our client are a leading manufacturer providing specialist solutions to a variety of industries such as aerospace, power generation, rail and oil and gas industries. They are looking for 3 Electro-mechanical Assemblers with experience within highly regulated industries, such as aerospace or defence manufacturing.Electromechanical AssemblerSunbury on ThamesManufacturing Company6-month contract (Umbrella / PAYE) Are you a skilled Electro-Mechanical Assembler looking for your next opportunity? Join a leading manufacturer dedicated to precision and quality. We re on the lookout for a hands-on Electro-Mechanical Assembler to contribute to our assembly process and support production demands. If you have experience in assembly and thrive in a fast-paced environment, this Electro- Mechanical Assembler role is perfect for you!Key Responsibilities for an Electro-Mechanical Assembler: • Wind, assemble, and install wire coils for electric rotors, stators, armatures, and related components, using both manual techniques and machines., • Utilize soldering equipment for tasks such as thru-hole, surface mount, or hard soldering., • Demonstrate strong electro-mechanical skills and the ability to interpret blueprints, assembly drawings, and schematics., • Exhibit exceptional attention to detail and manual dexterity in all tasks.The Electro-Mechanical Assembler should have the following Skills & Experience:, • Experience in assembling and wiring electrical components, • Hands-on experience with soldering for both surface mount and thru-hole applications., • Ability to read and interpret complex drawings and schematics., • Familiarity with safety protocols and quality control standards in electro-mechanical assembly work., • Proven track record of producing high-quality assemblies and components in a fast-paced, detail-oriented environmentWorking hours: Mon-Thu 7:30 to 16:00 (30 mins lunch break); Friday 08:00 to 13:30 Overtime paid at 1.3x weekdays 1.5x Saturday 2x Sunday Due to security clearances, candidates must hold a British passport and have the right to work in the UK.

We are looking for a Senior Electronics Design Engineer to join their hardware team. This is an exceptional opportunity to take ownership as the only Electronics Engineer within the business, leading hardware development from concept through to production. You will play a key role in product development, compliance, and manufacturing collaboration, working closely with Contract Manufacturers to ensure high-quality builds and successful certification. Key Responsibilities Lead electronic hardware design and development Design schematics, PCB layouts, and prepare Bills of Materials (BOM) Conduct circuit design and simulation Develop and debug hardware using oscilloscopes and lab equipment Lead compliance and radio certification testing Support automotive power supply design and validation Required Skills Strong degree in Electronics or Electronics Engineering Expert user of Altium (schematic capture, PCB layout, BOM preparation) Strong background in Circuit Design, Microcontrollers, Printed Circuit Board (PCB) Design, Schematic Capture Hands-on electronics experience (debugging, soldering, oscilloscope usage) Experience taking a product through radio compliance Experience with automotive power supply design and testing requirements It's a hybrid role, 2 days a week in London

An exciting opportunity for an experienced Radio Systems Engineer to join an innovative technology company delivering advanced two-way radio, RF and communications systems across healthcare, education and public sector environments. Radio Systems EngineerLondon, E14 9NN, working in the office and on customer premises • Full-time, permanent position We are a supplier of software and hardware solutions for the Healthcare, Local Authority & Education sectors. This includes Two-Way Radio Systems, Task Management, Auditing & Compliance, & Asset Tracking Systems. We deploy client software through integration with Two-Way Radio Systems, Android, & IOS devices. We also utilise MPLS and Mobile Network Operators to integrate our systems. This role offers an excellent opportunity to join a company operating at the cutting edge of system integration. We value collaboration, integrity & innovation; we support our staff to help them reach their professional & personal goals. Duties & Responsibilities: You are required to oversee all the daily activities of the customers' radio systems, including but not limited to. • Excellent knowledge of DMR / PMR radio equipment programming (Motorola, Hytera, Kenwood), • Extensive troubleshooting to the component level for digital radios, • Comprehensive site survey for distributed antenna system deployment, • Maintenance contract service & repairs, • Presales & post-sales support, • Engages in all aspects of Health & Safety, • Customer training, • Good soldering skills, • Good use of test equipment, • Accurate record keeping of customers' technical documentation and equipment profiles, • 5 years working in the business radio engineering sector, • Investigate & rectify RF interference & intermodulation, • Experience with distributed antenna systems, • EMF testing and measurements to meet Ofcom requirements, • Able to work away from home, • Experience working with VoIP & IP networks, • Radio Engineering: City & Guilds, • HNC Electrical, Electronics, or similar, • ECS card holder, • Carries out tasks as agreed, • Ensures their work is of a very high standard, • A good communicator, written and oral, • Thrives in a fast-paced environment and can easily adapt to change, • Can work in a team and work independently, • Can manage their own time and prioritise workload, • Good computer knowledge, • Good written & verbal skills, • A can-do attitude, • Office, • Customer premises, • Flexible working hours, • Pension, • Overnight & on-call pay, • Bonus scheme, • Mobile phone, • Private medical Insurance If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies, please. Other suitable skills and experience include RF Engineer, Telecommunications Engineer, Radio Communications Engineer, Field Service Engineer, Wireless Communications Engineer, Electronics Engineer, RF Systems Engineer, Communications Engineer, Technical Support Engineer, Systems Integration Engineer.

You're an experienced, hands-on Electronic Technician / Engineer with good fault finding diagnostic and repair skills at a component /PCB board level. Maybe you've got an assembly or repair background and want to do more? We don't do micromanagement - so you've got to have a detail oriented, organised and structured approach to work. BASIC SALARY: Up to £40,000 · 25 days holiday rising with service · Full access to company benefits package including pension · Flexible working within core hours LOCATION: Watford COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Cheshunt, Harrow, Wembley, Hayes, High Wycombe, Amersham, Chesham, Berkhamsted, Tring, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, Milton Keynes, Hitchin, Bletchley. WHY SHOULD I APPLY? · Friendly, close knit, experienced team of Electronic / Electrical Engineers - with a great team spirit · Work life balance is important! Come in, do your job, leave at a sensible hour · With 100 years in business - we're not going anywhere. Stable, reliable job - and a great place to work JOB DESCRIPTION: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB Based at the Watford site and working in our the test / calibration lab alongside a team of Calibration Engineers and a department manager. This role requires independent problem solving, and the ability to carry out repairs and adjustments on complex test equipment and instrumentation. You'll also be a key player in maintaining the integrity and performance of critical lab equipment - whilst also supporting and mentoring junior team members. You will occasionally support with calibration of equipment as required by the business. PERSON SPECIFICATION: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB · An experienced, hands-on Electronic Engineer with good soldering, fault finding diagnostic and repair skills at a component / board level · You've got a detail oriented, organised and structured approach to work · Your experience could come from electronic repair, assembly, calibration, testing etc. Any exposure to calibration labs would be a bonus. THE COMPANY: We're approaching 100 years in business, we're a well-respected manufacturer and brand of portable & hand-held electronic instrumentation. With a heavy focus and investment on R&D and New Product Development, we're genuinely a market leader for innovation in our industry sector. PROSPECTS: Regular salary reviews and potential to develop your career with a well established and growing business. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB, Soldering - Testing Lab, Calibration Lab INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18414, Wallace Hind Selection

Permanent | Space Systems | Hardware, Autonomy, and Innovation We’re supporting a pioneering deep-tech company building autonomous spacecraft systems that can sense, think, and act independently in orbit. Their technology is redefining how we protect and operate satellites in space, and they’re now looking for an Avionics Engineer to help design and deliver the next generation of intelligent orbital platforms If you love building complex electronics for real-world environments and want to work hands-on across design, integration, and testing, this could be your next big step. What You’ll Be Doing • Designing and laying out high-speed and mixed-signal PCBs for advanced space systems., • Conducting hardware bring-up, validation, and debugging using oscilloscopes, logic analysers, and other test equipment., • Building and maintaining electrical harnesses and assemblies for both flight and development hardware., • Working closely with mechanical, software, and systems teams to ensure seamless integration., • Supporting qualification testing for EMC, vibration, and thermal environments. What You’ll Bring • BEng/MEng in Electrical Engineering or equivalent hands-on experience., • Proven experience in PCB design, layout, and hardware testing., • Strong understanding of high-speed interfaces and signal integrity., • Skilled in using lab tools for debugging and performance testing., • Confident in electrical assembly, soldering, and harness fabrication. Nice to Have • Experience designing carrier boards for Linux-based SoCs., • Familiarity with NVIDIA SoCs or embedded Linux hardware platforms., • Exposure to FPGA integration and hardware simulation workflows., • Knowledge of space-rated electronics and fault-tolerant design., • Understanding of signal, power, and thermal integrity analysis. Please get in touch to find out more!

Overview ___, a cutting-edge learning center for young innovators, is seeking passionate and dynamic Contract Educators with both teaching and fabrication experience to offer high learning potential students, aged 5–16, a variety of engaging, hands-on courses. As a Contract Educator, you’ll deliver project-based courses designed around Cresconova Labs’ innovative framework: Inquiry-based Learning, Systems Thinking, Design Thinking with a drive towards Excellence. Key Responsibilities: This role requires but is not limited to the following responsibilities: • Makerspace Operations: Operate, maintain and instruct others on a variety of tools and equipment, • Full understanding 2D & 3D software, • Full working knowledge of 3D printers, Laser cutters, Soldering equipment and woodwork equipment, • Experience teaching 3D printing, Laser cutting and other equipment, • Computer Programming: Proficiency with computer science and programming robotics, • Ability to showcase program proficiency, • Safety & Compliance: Ensure all operations meet safety, hygiene, and safeguarding standards., • Document: Create and maintain all training spreadsheets and materials, Create and maintain all Zines for machinery, Understanding of maintaining all flammables lists and placards, • Collaboration & Leadership:, • Collaborate closely with the Chief Creative Officer and other team members to design and implement in-person and hybrid learning experiences., • Community Building: Foster a welcoming and inclusive environment that encourages innovation and learning., • Sustainability: Work with leadership to create a sustainable, future forward approach for Cresconova Labs Family Engagement • Assist with programs such as speaker series and Open house events. Teaching & Classroom Support • Experience creating curriculum: ability to showcase curriculum, • Experience teaching fabrication courses, ensuring alignment with the Cresconova Labs Framework., • Experience working with students ages 5-16+, • Experience teaching high learning potential students, • Experience with low floor, high ceiling curricular and project development, • Support contract instructors with assistance regarding classroom activities, materials preparation, and student engagement. Expectations for Growth • Short-Term: Learn a variety of machinery and software, ensure studio support for courses, and learn curricular development using Labs framework. Focusing on skills within the Cresconova Labs framework and confidence on equipment and software. Managing Cresconova educators and staff members., • Long-Term: Demonstrate mastery of the role by driving initiative moving towards machinery maintenance, leading lessons with machinery focus, and supporting educators with machinery. Necessary Attributes: • Strong interpersonal skills, with a friendly and approachable demeanor., • Strong organizational skills necessary to manage growth, • The ability to juggle multiple responsibilities effectively within a startup environment, • Open communication with team members, • Ability to work every Saturday (Sunday and Mondays off), • 3+ years of curriculum development. Support & Development To help you succeed in this role, we will provide: • Mentorship: Work closely with senior staff to learn Cresconova framework, curricular development and operational processes with machinery focus., • Training: Receive training on Cresconova Framework, attend PD for Cresconova Framework, Jedi and SEL, and equipment operation., • Growth Opportunities: Working with a leadership team to grow into a manager role overseeing Cresconova educators.

Part time Jeweller About the brand: Launched in 2017, Loveness Lee is a contemporary British jewellery brand for those with a daring attitude to style. Handcrafted designs are inspired by founder Loveness’ fascination with abstract textures and forms that derive from the hidden depths of nature and create serendipitous wearable sculptures. The versatility of our designs mean there is always a little something for everyone, from bold golds to dainty pearls and everything in between. In 2019 we opened our flagship OXO Tower store in London’s reputable Southbank, overlooking the River Thames. This elegant and stylish store is like walking into the mind of founder Loveness Lee, with rough textured cave-like walls, paired with dried flowers complimenting the array of beautiful jewellery on display. The space doubles up as their workshop, meaning you can observe the team handcrafting jewellery as you browse the store. Job Overview: As a Jewellery Bench Assistant, you will play a vital role in supporting the smooth operation of our jewellery workshop. You will be responsible for assisting in various tasks related to jewellery making, stock management, customer service, material procurement, and design assistance. Your attention to detail, craftsmanship, and ability to multitask will contribute to maintaining high standards of quality and customer satisfaction. This role is part time including Saturdays. Key Responsibilities: 1. Jewellery Making: • Assist in the production of jewellery pieces according to established designs and specifications., • Work closely with the jewellers to prepare materials, assemble components, and complete finishing touches., • Ensure adherence to quality standards and craftsmanship throughout the manufacturing process. 2. Stock Count and Management: • Conduct regular inventory checks to monitor stock levels of raw materials, tools, and finished products., • Maintain accurate records of inventory movements, including receipts, withdrawals, and adjustments., • Coordinate with the purchasing department to replenish stock in a timely manner and prevent shortages. 3. Customer Assistance: • Greet and assist customers in a friendly and professional manner., • Provide product information, guidance, and recommendations to customers based on their preferences and requirements., • Handle inquiries, resolve complaints, and ensure a positive shopping experience for all customers. 4. Material Procurement: • Assist in sourcing and purchasing materials needed for jewellery production, such as gemstones, metals, findings, and tools., • Research suppliers, obtain quotes, and negotiate prices to ensure cost-effective procurement., • Monitor delivery schedules and inspect incoming materials for quality and accuracy. 5. Design Assistance: • Collaborate with designers and artisans to translate design concepts into tangible jewellery pieces., • Assist in sketching, prototyping, and refining designs to meet aesthetic and technical specifications., • Provide input on material selection, construction techniques, and feasibility of design ideas. Qualifications: • Previous experience in jewellery making or a related field., • Proficiency in jewellery making techniques, including soldering, filling, wax curving and polishing. Stone setting is an advantage., • Strong organizational skills with the ability to prioritize tasks and manage time effectively., • Excellent communication and interpersonal skills for interacting with customers and colleagues., • Knowledge of jewellery materials, tools, and equipment., • Familiarity with inventory management software or systems is an advantage., • Creative flair and an eye for detail in design and craftsmanship. Working Conditions: • This role primarily operates in a jewellery workshop environment., • Flexible schedule may be required, including weekends and holidays during peak seasons. Join Our Team: If you are passionate about jewellery making and thrive in a collaborative, creative atmosphere, we invite you to apply for the Jewellery Bench Assistant position. Bring your skills and enthusiasm to our team and be a part of crafting exquisite pieces that bring joy to our customers' lives. Hours: 4 days a week, Saturdays Mandatory. Salary & Benefits: £130-£150 per day (based on skills) + commission. The Interview Process -Life Story & Values - a 30 min video call with our owner for us to get know each other better -In-Store Technical Interview - you'll meet our team members in the workshop to have varies jewellery skill tests in a half day trial day.

Soldering & Assembly Technician - KENT Contract: Permanent | Full Time Hours: Monday - Thursday | 07:00 - 16:00 (30-minute lunch) Friday | 07:00 - 11:15 Build Precision. Create Light. Be Part of Something Exceptional. We are a proudly UK-based designer and manufacturer of high-performance lighting solutions used in architectural, marine, and specialist display projects around the world. With over four decades of craftsmanship and innovation behind us, our products are trusted by leading lighting designers globally - and over 50% of what we create is exported worldwide. Following significant growth, we've expanded to a team of 70+ people and invested in additional facilities to support our state-of-the-art testing and assembly operations. Now, we're looking for a skilled and detail-driven Soldering & Assembly Technician to join our production team. The Role This is a hands-on, bench-based position where precision, care, and pride in your work matter. You'll be assembling high-quality lighting products to customer specifications, often managing multiple works orders at once. All kits and components will be delivered directly to your workstation - your focus is on building, testing, and ensuring flawless quality. You'll report to the Production Manager, with day-to-day guidance from a Production Team Lead...

Soldering & Assembly Worker Location: Crayford Salary: GBP24,857 per year.Hours: Monday - Thursday, 7am - 4pm.Job type: Full-time, permanent Bridge Recruitment is helping one of our established clients recruit for an experienced Soldering & Assembly Worker to join their ever-expanding team.Respon

Siamo Group are looking for a skilled Wirer for a client of ours based in Ashby-de-la-zouch, this is a temp to perm position Shifts - 08:00 - 16:00 Location - Ashby-de-la-Zouch, Leicestershire Salary - Depending on experience Temp to Perm Role Purpose and Scope The Wirer is responsible for the consistent, high-quality production of electrical assemblies, including wire harnesses, looms, and control panels. At this level, you are expected to work independently from technical drawings and wire lists, applying advanced techniques to ensure every product meets strict functional and aesthetic standards. The scope of the role involves end-to-end assembly, self-inspection, and functional testing. You serve as a dependable core member of the production team, maintaining high output rates while adhering to quality standards and safety protocols. Core Functional duties and responsibilities Complex Wiring: Execute intricate wiring tasks including multi-core cable assembly, specialized connector terminations, and shielding. Soldering & Crimping: Perform high-quality soldering and mechanical crimping to industry-standard specifications, ensuring durable and conductive connections. Loom Manipulation: Build and route complex looms on harness boards, ensuring correct tension, bend radii, and breakout points. In-Process Inspection: Conduct rigorous self-inspections of all work, identifying and correcting any non-conformances before final assembly. Functional Testing: Use continuity testers, and automated test programs to validate that the assembly meets all electrical requirements. Defect Reporting: Identify and report recurring material or design issues to the Team Leader or Senior Wirers to support continuous improvement. Output Optimisation: Maintain consistent production speeds to meet daily targets while ensuring a Right First-Time approach to minimise rework. Required Skills & Competencies Technical Proficiency: Ability to use all internal and external technical systems for daily job role. Problem-Solving: Able to self-serve and find solutions for issues. Ability to analyse minor operational faults and implement approved corrective actions independently. Communication: Effective written and verbal communication for logging work, interacting with team members, customers, and escalating issues through the right platforms and channels. IPC620 qualifications desirablebut not essential Thisis a mix of box building & harnesses If you feel you have the right skills for this job and would like to be considered please call 01530416770 or send an up to date CV to TPBN1_UKTJ

Electro-Mechanical Assembly Technician Location: Hook, Hampshire Salary: £30,000 – £35,000 Job Type: Full-time, Permanent Are you an Electro-Mechanical Technician or Electronics Assembly professional looking for your next step? A well-established engineering business based in Hook is looking to add an Electro-Mechanical Assembly Technician to its growing production team. This role would suit someone with hands-on experience in electronics assembly who enjoys working with both electrical and mechanical components in a high-quality manufacturing environment. The Role As an Electro-Mechanical Assembly Technician, you will support the build and assembly of complex products, working to drawings, work instructions and quality standards. The role is predominantly hands-on, combining electrical assembly with light mechanical build and documentation support. Key Responsibilities • Electro-mechanical assembly of components and sub-assemblies, • Soldering, crimping and cable assembly to IPC or equivalent standards, • Assembly of mechanical parts including housings, brackets and fixtures, • Working from engineering drawings, wiring diagrams and build instructions, • Updating and maintaining build documentation and records, • Identifying and reporting faults or build iss...

Commercial Gas Engineer - United Kingdom Job Purpose The main purpose of this role is to carry out all aspects of servicing and remedial repairs to commercial heating/gas systems in a variety of environments including hotels, large private residential blocks, schools and a range of commercial buildings. The postholder will work independently and in teams depending on the particular job and be supported by a technical and administrative team. The role is based in and around the UK. The post holder will ensure the quality of their work is of the highest standard by maintaining their skills and appropriate registrations and will also be part of the out-of-hours emergency callout rota. Key Duties and Responsibilities • Carry out mechanical works to include service and breakdown on all aspects of commercial heating systems including all main types of boiler, pressurisation units, expansion vessels, plate heat exchangers, and pumps (ideally to be able to replace all seals and bearings) • Test and repair basic electrical systems in plant rooms including testing of contactors, overloads and relays (complex electrical work carried out by NICEIC qualified staff). • Carry out pipework repairs and installations including copper soldering, threaded barrel pipe, crimping and fusion weld where required • Work flexibly and proficiently to ensure works are completed in a reasonable time to a high standard. • Maintain a detailed knowl...

Job Overview We are seeking a skilled HGV Technician to join our dynamic team. The ideal candidate will possess a strong mechanical knowledge and expertise in the repair and maintenance of heavy goods vehicles. This role is crucial in ensuring that our fleet operates efficiently and safely, providing excellent service to our customers. Duties Conduct thorough inspections and diagnostics on HGVs to identify issues and determine necessary repairs. Perform equipment repair, including welding and electrical work as needed. Assemble and disassemble vehicle components, ensuring all parts are functioning correctly. Utilise hand tools and power tools effectively to carry out repairs and maintenance tasks. Maintain accurate records of services performed and parts used for each vehicle. Provide exceptional customer service by communicating effectively with clients regarding their vehicle needs and repair status. Adhere to health and safety regulations while working in the workshop environment. Assist in training junior technicians or apprentices as required. Requirements Proven experience as an HGV Technician or in a similar role within the automotive industry. Strong mechanical knowledge with hands-on experience in equipment repair, welding, electrical systems, assembly, and soldering. Proficiency in using hand tools and power tools safely and effectively. Excellent problem-solving skills with the ability to diagnose issues accurately. Strong customer service skills to ensure client satisfaction. Ability to work independently as well as part of a team in a fast-paced environment. A valid driving licence is preferred but not essential. If you are passionate about vehicles and possess the necessary skills, we encourage you to apply for this exciting opportunity to join our team as an HGV Technician. Job Types: Full-time, Permanent Pay: £18.00-£27.00 per hour Expected hours: No less than 40 per week Benefits: Company pension On-site parking Work Location: In person

Job description Interaction Engineering Job Title: Panel Wirer / Electrical Panel Builder Our client is looking for an experienced Panel Wirer to join their established engineering team. The successful candidate will be responsible for wiring, assembling, and testing electrical control panels to a high standard, working from engineering drawings, schematics, and wiring diagrams. Key Responsibilities Build, wire, and assemble electrical control panels from schematic drawings Install components such as PLCs, relays, contactors, breakers, drives, and terminals Carry out point-to-point wiring and cable terminations Perform basic electrical testing and fault-finding Maintain high-quality standards and follow company procedures Work collaboratively with engineers and production teams to meet project deadlines Skills and Experience Required Proven experience in panel wiring or electrical assembly Ability to read and interpret electrical schematics and wiring diagrams Strong crimping, soldering, and cable management skills Understanding of control systems and automation components (advantageous) High attention to detail and a strong work ethic Ability to work independently and as part of a team What the Client Offers Competitive salary with overtime opportunities Stable long-term role within a growing organisation Modern workshop and quality tools Training and progression opportunities Supportive team environment INDTE TPBN1_UKTJ

Electro - Mechanical Technician Rugby 0830 - 173 Mon - Fri (Early Friday Finish) £28K - £32K (depending on electronic assembly experience) Full Time - Permanent To be considered: it's vital that you have multiskilled electronic assembly experience and that you can wire, crimp and soldering (this is NOT a trainee or junior role and it's NOT a PCB role). We are looking for experienced electronic assembly operatives who can wire, crimp and solder for a busy electronic assembly client in Rugby. This is a shop floor role working on all aspect of assembly (not just PCB). You will be building frames, wiring up power systems, crimping, soldering, following diagrams and working with drawings. It's a company who make products all year round so there is no massive peak or dip meaning you have a constant supply of work and this site is very busy. To be considered: it's vital that you have multiskilled electronic assembly experience and that you can wire, crimp and soldering (this is NOT a trainee or junior role and it's NOT a PCB role). This role offers you: £28K - £32K (depending on experience). A permanent job from day one. Excellent facilities. The chance to work on some of the very latest technology. A nice career path to climb. APPLY NOW If you feel that this is the perfect role, you have the skills and experience clearly needed then please apply now. Just respond back with your CV or call Scott Saunders @ SolviT Recruitment on 01455 818999 NOW #WeCanSolviT TPBN1_UKTJ

The Company Our client is a market leader in the Electronic Manufacturing sector. A sustained period for growth is the reason they are looking to recruit an Electronic Repair Technician. The Role Test and repair printed circuit board assemblies to component level. Identify through testing the root cause components related to the fault. Soldering, reworking and replacement of all necessary components to affect the repair. Accurate data entry to document repair work to support business KPIs. Support the Test Engineering function on a variety of products. Develop soldering techniques/methods for complex PCBAs Recommend process improvements to prevent PCB failures and improve business KPIs. Use of various technologies available to aid repair. Highlight potential/existing problem areas to relevant personnel. Support SMT with complex re-processing. Return product to customers upon repair highlighted accordingly. Suggest and implement permanent corrective actions. Any other reasonable technical duties. The Person You must have previous working knowledge of electronics sector. Able to fault find down to component level. Experience with electronic Test equipment. Ideally you will hold HNC or have relevant experience. Happy to work a day shift. The Benefits You will be working for a well-established growing employer. An excellent salary. A company experiencing continued growth, expansion and investment. The company are fully compliant with the latest health and safety requirements for current safe working practices. TPBN1_UKTJ

Soldering Technicians will be responsible for performing precision soldering and assembly of electronic components in accordance with manufacturing standards, work instructions and quality requirements. We are currently recruiting experienced Soldering Technicians to work in a busy clean production

An opportunity has arisen for a Technical Solutions Engineer, based in Elstree, Hertfordshire to join a leading innovative communications provider for critical solutions. As a Technical Solutions Engineer, based in Elstree, Hertfordshire you will specialise in research, design and testing of radio frequency-based products including low-band UHF technology (420-470 MHz) and two-way radio solutions. You will get the opportunity to be hands on with new software and hardware products to be operationally assessed tested and signed off for customer use in high end consumer environments such as superyachts and NYC skyscrapers. The successful Technical Solutions Engineer, based in Elstree, Hertfordshire will have prior experience across • Proven practical RF testing and occasional design across low-band UHF range., • Good practical skills including soldering, fault-finding and the use of RF test equipment., • Electronics Engineering or RF Engineering background, • Knowledge of RF-based technology such as paging & two-way radio is advantageous., • Knowledge of IT hardware (routers)

The Electronic Assembly Technician will be part of our dedicated production team.This role will focus on assembling, wiring and testing products.Key responsibilities: Completing various assembly tasks involving hand soldering, cable and wire assembly and general assembly techniques for production.U

Soldering & Assembly Technician - KENT. Soldering & Assembly Technician.

Hours: Monday Thursday, 7am 4pm.Job type: Full-time, permanent.Bridge Recruitment is helping one of our established clients recruit for an experienced Soldering & Assembly Worker to join their ever-expanding team.Responsibilities of the Soldering & Assembly Worker:.Mixing and filling electronic as

The Role This is a hands-on, bench-based position where precision, care, and pride in your work matter.You'll be assembling high-quality lighting products to customer specifications, often managing multiple works orders at once.All kits and components will be delivered directly to your workstat

Principal Electronics & Software Product Engineer Location: Cambridge, Cambridgeshire An exciting opportunity has arisen for a Principal Electronics & Software Product Engineer to join a specialist product design consultancy focused on developing innovative technologies for multinational clients across the medical industry. The business has expanded its global capability while maintaining a reputation for exceptional engineering, strong project leadership, and delivery within regulated and safety-critical markets. This role sits within a rapidly growing technical team developing complex electromechanical products from concept through to manufacture. This position is ideal for an experienced electronics or electromechanical product development engineer looking to step into a principal-level role, lead multidisciplinary teams, and take ownership of full product architectures while contributing to business growth and client development. Main Responsibilities of the Principal Electronics & Software Product Engineer (Cambridge): Develop electronics and embedded software (C/C++) for diverse and technically complex new products Lead the integration of electromechanical product designs through to manufacture and production transfer Take technical ownership of product architecture from concept generation through to launch Deliver technical progress to clients and, over time, lead multidisciplinary project teams Contribute to requirements definition, specification development, schematic capture, PCB layout, hardware bring-up, debugging, and product validation Support project planning, resourcing, and leadership activities Build strong client relationships and support the conversion of new opportunities into commercial contracts Requirements of the Principal Electronics & Software Product Engineer (Cambridge): Proven industry experience designing, prototyping, and testing electronic circuits and systems, including embedded software development in C/C++ Strong practical electronics skills including soldering, PCB rework/modification, wiring, and use of common laboratory test equipment Experience across the electronic product development lifecycle from concept through to prototype and manufacture Ability to work effectively within cross-disciplinary teams, with strong written, verbal, and presentation skills A First or 2:1 degree in Engineering from a leading university (UK top 10 or equivalent) Eligibility to work in the UK (visa sponsorship not available) Experience in project planning, leadership, or team coordination would be advantageous Working Pattern & Benefits: Full-time, permanent role Competitive salary and performance-based bonus structure Career development support including mentoring and personal training budgets Opportunity to work on innovative, safety-critical products in regulated international markets Exposure to multinational clients and potential travel opportunities Ethical working environment focused on improving lives through engineering excellence To apply for this Principal Electronics & Software Product Engineer role, please send your CV to Kishan Chandarana: 01582 878 830 TPBN1_UKTJ

Senior Electrical Technician Abingdon Rd, Culham, UK Full-time Salary: £42,858 (inclusive of Specialist Allowance) + excellent benefits including outstanding pension Division: RACE Site Location: UKAEA Culham, Oxfordshire Confirmed Grade: Level 4 Department: Electrical Company Description By 2050, the planet could be using twice as much electricity compared to today. Are you interested in contributing and helping to shape the future of the worlds energy? If so, read on. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for ground-breaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: • Outstanding defined benefit pension scheme, details of which can be found at the end of this advert - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible) - Flexible working options, including family-friendly policies and the right to request flexible working from the start of your employment - Employee Assistance Programme and trained Mental Health First Aiders - Generous annual leave allowance starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays - Wide range of career development opportunities - A vibrant culture committed to equality and being fully inclusive What to expect in our recruitment process: For a step-by-step overview of how we hire from application to offer, please see our Recruitment Process page on our website. Job Description The salary for this role is £42,858 (inclusive of a Specialist Allowance). Onsite working is expected for 5 days a week. This role is based at the following site: Culham, Oxfordshire. This role requires employees to complete an online Baseline Personnel Security Standard (BPSS) , including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open-source data. The Role We are seeking a Senior Electrical Technician to join the RACE team, taking a leading role in the wiring, modification, commissioning, maintenance, and operation of advanced electromechanical remote handling systems. This is a senior, practical technical position , requiring a high level of technical competence and judgement, in which you will lead by example while supervising and supporting a team of technicians. You will work closely with engineers, project teams, and stakeholders, contributing your expertise to both the development and delivery of innovative new electrical systems and the support of existing equipment. If this opportunity is of interest, we would be pleased to hear from you. Key Accountabilities: • Deliver electrical control cubicles and associated systems, ensuring equipment is built to a high standard, and in accordance with all relevant UKAEA and international standards. - Communicate and coordinate effectively with project teams and stakeholders, clearly highlighting any potential build or operational issues, and proposing solutions. - Support workshop management by prioritising tasks, highlighting issues where targets cannot be met, deputising for the Electrical Workshop Manager when required, and assisting the Remote Handling Electrical Plant Manager with any modifications to existing equipment. - Ensure safe working practices by following relevant risk assessments and procedures within the electrical workshop and associated work areas, and updating these as required. - Provide build documentation as required, including marked-up drawings and bills of materials, to enable engineering teams to ensure project information is accurate. Qualifications • A relevant engineering degree/HND or HNC/apprenticeship or equivalent with significant industry experience - Qualified to the current BS7671 Wiring Regulations - Ability to understand and work from drawings and schematics - Comprehensive knowledge of crimping and soldering techniques - Knowledge and experience of assembly of high-density connectors Candidates not meeting the full criteria for the higher level (currently advertised at level 4 grade internally) may be considered for a Level 3 appointment, involving team-based technical work rather than supervisory duties and requiring less experience. Additional Information For a full list of benefits and to apply, select the apply button to be taken through to the UKAEA careers pages. UKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds who want to help us achieve our mission. We are under-represented from some groups and so want to encourage applications in particular from women in STEM, people from Black British Caribbean and African backgrounds and from Pakistani and Bangladeshi British backgrounds. Our Executive team, supported by our 'Head of Equality, Diversity and Inclusion' (EDI) and Wellbeing, and our EDI Networks actively promote Inclusion and take steps to increase diversity within our organisation. We reinforce best practices in recruitment and selection and evaluate approaches to remove barriers to success. The UK Atomic Energy Authority is committed to being accessible. Please contact us if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks, but may close earlier if we receive a large number of applications. TPBN1_UKTJ

CareerMakers Recruitment are currently looking for a Waveguide Technician in Newton Abbott, TQ12. Initial duties : Torch brazing and soldering of Brass, Copper and Aluminium Forming (bending and twisting) of waveguide tube Painting (Wet Spraying) Silicone moulding and coating To learn how to maintain workshop equipment and to keep it in good repair Meeting production targets Shift Pattern: Monday Thursday, 7am - 4pm Friday, 7am - 12pm The finer details: On going Work £12.21 per hour Temp to Perm 25 days holiday (plus bank holidays) Healthshield This is a great opportunity and if you would like to discuss your next Career move, please do not hesitate to get in touch with CareerMakers now! TPBN1_UKTJ

An opportunity has arisen for a Technical Solutions Engineer, based in Elstree, Hertfordshire to join a leading innovative communications provider for critical solutions. As a Technical Solutions Engineer, based in Elstree, Hertfordshire you will specialise in research, design and testing of radio frequency-based products including low-band UHF technology (420-470 MHz) and two-way radio solutions. You will get the opportunity to be hands on with new software and hardware products to be operationally assessed tested and signed off for customer use in high end consumer environments such as superyachts and NYC skyscrapers. The successful Technical Solutions Engineer, based in Elstree, Hertfordshire will have prior experience across Proven practical RF testing and occasional design across low-band UHF range. Good practical skills including soldering, fault-finding and the use of RF test equipment. Good knowledge of RF digital / analogue and power supply The ideal Technical Solutions Engineer, based in Elstree, Hertfordshire Electronics Engineering or RF Engineering background Knowledge of RF-based technology such as paging & two-way radio is advantageous. Knowledge of IT hardware (routers) Programming languages for software applications (ideally C#, Java, Python). In return you will receive a competitive package to reward your contribution and have the opportunity to gain professional and career development in an industry leader. Apply Now, if this Technical Solutions Engineer, based in Elstree, Hertfordshire job sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email quoting THD1368. Alternatively, if this job is not suitable but you are looking for a job within Sales, please call 01582 878 848 for a confidential discussion. TPBN1_UKTJ

Soldering & Assembly Technician - KENT Contract: Permanent | Full Time Hours: Monday - Thursday | 07:00 - 16:00 (30-minute lunch) Friday | 07:00 - 11:15 Build Precision. Create Light. Be Part of Something Exceptional. We are a proudly UK-based designer and manufacturer of high-performance lighting solutions used in architectural, marine, and specialist display projects around the world. With over four decades of craftsmanship and innovation behind us, our products are trusted by leading lighting designers globally - and over 50% of what we create is exported worldwide. Following significant growth, we've expanded to a team of 70+ people and invested in additional facilities to support our state-of-the-art testing and assembly operations. Now, we're looking for a skilled and detail-driven Soldering & Assembly Technician to join our production team. The Role This is a hands-on, bench-based position where precision, care, and pride in your work matter. You'll be assembling high-quality lighting products to customer specifications, often managing multiple works orders at once. All kits and components will be delivered directly to your workstation - your focus is on building, testing, and ensuring flawless quality. You'll report to the Production Manager, with day-to-day guidance from a Production Team Leader. What You'll Be Doing Assembling products in a manufacturing environment Hand-solderin...

Production Operator (Electronics / Soldering) £25,500 - £26,000 + Overtime + 33 Days Holiday + Bonus + Life Assurance + Sick Pay + 4% Pension Andover, Hampshire Are you from a manufacturing/production background with experience soldering, looking for a stable, local role within a well-established company, offering an excellent working environment, great benefits, and 38.5 hours a week with an early finish on Friday? In this role you will be hand soldering and operating machines to produce PCB assemblies within a close-knit production team. From following customer specifications and requirements, you will be using your hands and dexterity skills, with full on-the-job training given. Founded nearly 40 years ago, this manufacturer supplies their specialist products into industries such as aerospace, automotive, and medical, with trusted clients across the globe. They have experienced unprecedented growth over recent years and have a clear direction for the future with a new site opened recently. This role would suit someone who has great dexterity, happy using their hands to solder small electronic components, within a long-term role working Monday to Friday and only 38.5 hours a week. The Role: Producing PCB assemblies by following customer specifications Soldering by hand and operating machines, supporting on testing Full on-the-job training given Monday to Thursday, 8:30am - 5pm, finish at 3:30pm on Friday, 38.5 hours a week The Person: Production Operator or similar Soldering experience or happy to learn Reference number: BBBH23700a Engineer, Engineering, Manufacturing, Production, Electronic, Electronics, PCB, Assembly, Operator, Operative, Test, Assembler, Manufacture, Andover, Hampshire, Tidworth, Winchester If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: We are looking for a responsible production engineer for the assembly and testing of PCBs for remotely operated vehicle sub-systems. Ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. This role is based at our Fareham Campus site. Key Accountabilities and Responsibilities: Attend SQCDP meetings and support a hands problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. Standardise processes and procedures to ensure consistency, minimise variation, and improve cross-department collaboration. Assess and maintain adherence to safety and compliance standards (ESD, soldering irons, extraction) Own, document and train others on manufacturing process and standards. Write build instructions and transfer test specifications into operator instructions. Commission and programme machines such as Extra eye inspection, paste screening and pick and place (surface mount), board cleaning and reflow oven. Plan inhouse and subcontract maintenance. Load BOM's into MRP - Structure BOMs and Routings for inhouse and external manufacturing. Continuously improve production area capability for safety, compliance and efficiency - Create and update test equipment & fixture design, production data and value stream. Manage NPI transfer and change requests into production. Provide technical support for production, purchasing and production control. Skills & Experience: Senior PCB biased Production Engineer with experience in prototyping, testing and fault finding. Background in low-volume, one-off engineered products and systems. (Support and training is available for Working with Electrics, High Voltages, and Hydraulics). Strong knowledge of electrical equipment relating to products such as rack equipment, power supplies and electronics enclosures with integrated PCBs - Knowledgeable with IPC-A-610 Class 3. (familiarity of Labview, IPC/WHMA-A-620 Class 3 and PUWER beneficial). Minimum qualifications HNC/HND or Bachelor's degree in Electrical & Electronic Engineering, Electronic Products, Computer Engineering or relevant experience in Electronic Design, Industrial/Manufacturing Engineering or a related field. Hands-on production support experience in assembly, testing, and quality control. General Accountabilities and Responsibilities: Use initiative to develop effective solutions to day-to-day challenges. Maintain proficiency in relevant IT systems. Act ethically and with integrity at all times. Foster professional relationships and work cross-functionally to meet business objectives. Perform other duties as assigned by management. Maximise productivity through process improvements and enhanced quality control. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. TPBN1_UKTJ

Installation of ancillary equipment Working with basic hand-pump systems and 3-phase electrical installations Carrying out basic soldering and wire assembly Reading and working from wiring diagrams Supporting both the mechanical and electrical build of engineered systems Mechanical Fitter Experience

ElectricalAssembly Operative / Wireperson Location: Clevedon, North Somerset Salary: £13. General assembly work Understanding of production processes Crimping Soldering Preparing wiring looms Working from drawings and build documentations Assisting the Control PanelWirespersonswith any other duties

Introduction: Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Saab Seaeye Business Unit. In this role, you will gain an in-depth knowledge and understanding of our product range and have the opportunity to manufacture a range of ROV assemblies from component level through to final testing and sign off. Additionally, you will gain an understanding of real world performance and use fault-finding methods to perform route cause analysis on returned products that require servicing or refurbishment. Key Responsibilities: You will be responsible and accountable for the manufacture and repair of electro-mechanical assemblies. Have the ability to read and interpret engineering drawings and schematics to assist with building and fault finding across the product range. To ensure soldering and electrical looming is carried out to a high standard. To assist with pressure and soak testing of all Saab Seaeye components when required, in a timely fashion. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role Previous experience working on complex medium to large Electro-mechanical and Hydraulic assemblies, down to a component level. Be familiar with 6S principles and lean working initiatives. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To act ethically, with integrity and in the best interest of the business at all times. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role. To carry out any other duties as detailed by your Supervisor or Manager from time to time. Required Skills: Ability to interpret electro/mechanical/hydraulic schematics. Proven knowledge and experience of mechanical engineering practices. Should have an understanding of electronic manufacturing practices, such as IPC or equivalent. Have the ability to use proven fault finding methods to diagnose electrical and electronic faults to PCB board level. Desirable Skills: Component level diagnostics would be advantageous A formal qualification in mechanical/electrical engineering - NVQ level 3 or equivalent. Previous use of electronic testing equipment such as oscilloscopes/megger/multi meters. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. TPBN1_UKTJ

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Saab is expanding in the UK and we are now seeking a talented and highly motivated RF Inspection & Test Technician to support our radar and sensors activities at our Fareham office. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As an Inspection & Test Technician you will work in the Production department as part of the Test & Inspection team. Duties will be (but not limited to) inspecting produced items and units and testing units and the G1X Radar. Whilst the role is based in Fareham there may be opportunities for trips to Sweden for training and knowledge transfer. Key responsibilities include: Support Inspection & Test Team Leader by being proactive to achieve production goals Ensure any soldering and electrical looming is carried out to a high standard in line with company standards and procedures. Test functionality of produced units and sub-assemblies Help and support others with training when possible, by passing on knowledge and skills. Understand and interpret electrical drawings. Follow documented processes and record results Carry out any other duties as detailed by the team leader or Production Supervisor. Maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. Act ethically, with integrity and in the best interest of the business at all times Maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. Test radar systems, including conducting thorough inspections and performance evaluations to ensure they meet required specifications. Troubleshoot radar systems by identifying and resolving technical issues, performing diagnostic tests, and implementing corrective actions. Liaise with Swedish colleagues over Teams, email, or in person to collaborate on projects, share knowledge, and ensure effective communication and coordination across teams. Required Skills: Be familiar with use of standard test and measurement equipment used in either a communications, radar or electronic warfare systems environment Enjoy working and developing in a team Like cooperating with others but are capable of working individually as well Good technical communication skills Computer literate Capable of good time management During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship Experienced in the use of multi-meters, Oscilloscopes, Spectrum and Network Analysers with a knowledge of both analogue and digital systems. Good knowledge of electrical and electronic components and principles. Have 3-5 years of minimum RF experience, with a proven track record of troubleshooting. Desired Skills: Capable of inspecting to IPC class 3 standard Have a background in inspection, testing and measurement (3-5 years minimum) As a person you are positive, social, result oriented and a team player. Proficiency in documenting procedures, findings, and recommendations. Capacity to develop creative solutions to unique challenges. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. TPBN1_UKTJ

Are you skilled in soldering and passionate about producing high-quality work? Join our friendly and professional Auto Assembly team, where precision and teamwork come together to deliver excellence.Interested in learning more about this job Scroll down and find out what skills, experience and educa

Soldering & Assembly WorkerLocation: CrayfordSalary: £24,857 per year. Job type: Full-time, permanentBridge Recruitment is helping one of our established clients recruit for an experienced S

We imagine someone with skills in fields like electronics, or whose hobbies are in areas like model building or the arts, and can follow hands-on processes to the letter will be skilled and able to carry out this role. Precision assembly of chemical detector units, this will involve soldering compon

A good level of previous electronics assembly experience is required, soldering experience is an advantage. Production Operatives (Electronics).

Electronics Assembly Operatives Strong PCB soldering background is needed. Monday 9 March The Opportunity We are recruiting two experienced soldering operatives for an electronics company in Rugby.

The role is to assembling small components, so attention to detail and quality its absolutely must.You will be working in small team, using a variety of hand and power tools.Experience working in an assembling & soldering desired but not mandatory, as full training will be given.What's on Offer: Sta

We are currently seeking a skilled and detail-oriented Cable Assembly Technician to join our team.If you have a passion for precision work, excellent soldering skills, and a commitment to quality, we encourage you to apply.Ideal Candidate must have over 6 months experience Hours: Monday to Thursday

A recruitment agency in the United Kingdom is seeking a PCB Assembly Technician for an ongoing long-term contract.The position involves both day and night shifts on a 2-week rotation within a busy manufacturing area.The ideal candidate will require practical skills in electronics assembly, soldering

You will be responsible for assembling electrical products, including tasks such as using hand tools and power tools, soldering, and performing mechanical assembly.The technician will also be involved in quality control to ensure all products meet the company's high standards.Previous experienced ga

A recruitment agency in the UK seeks an experienced Soldering & Assembly Worker in Crayford. The role involves mixing and filling electronic assemblies, hand soldering, and managing workload.

The role involves reading assembly drawings, hand-soldering, and conducting quality checks.

An established electronics firm in Crayford seeks an experienced Soldering & Assembly Worker for a full-time, permanent position. The role involves mixing resins, hand soldering, managing workloads, and testing products while maintaining high quality standards.

A global engineering company is seeking a Skilled Electronic Technician to join their production team in North Greenwich.The role includes safe assembly of communication equipment, requiring previous soldering experience and a background in engineering or similar fields.Applicants must be prepared t

A global engineering company is seeking a Skilled Electronic Technician in North Greenwich.The role involves mechanical and electro-mechanical assembly of communication equipment with full training provided on fibre optic handling.Candidates should have soldering experience and ideally an engineerin

If you feel like you meet the above criteria for the Soldering & Assembly Worker role, then please apply now!. Bridge Recruitment is helping one of our established clients recruit for an experienced Soldering & Assembly Worker to join their ever‑expanding team. Use of basic hand tools (screwdriver