Steel jobs in EwellCreate job alerts

Job Title: Structural Engineer Location: In person, Chessington, KT9 1BD Salary: Up to £65,000 per annum (based upon 5-day 37.5-hour week) depending on experience. Job Type: Permanent, Full time About us: We are a multi-disciplinary firm of Consulting Civil and Structural Engineers and Building Surveyors, established in 1990. We specialise in forensic investigations, forensic engineering, and disaster recovery, and our project sites takes us into Central London and into the Home Counties. Our Client base ranges across varying sectors including; public sector, residential, commercial, and education. Responsibilities and Duties: As a Structural Engineer, you will assist the structural engineering team with the design and management of key projects. Your key responsibilities will include but may not be limited to; • Providing engineering services to time and budget, • Defects analysis of existing buildings and associated report writing, • Inspection and assessment of damaged structures and the preparation of repair schedules and specifications, • Development of structural schemes for new build developments, • Undertaking elemental design calculations, • Preparing reinforcement detail drawings, bending schedules, and structural steel details, • Preparation of contract documents for structural repair projects and acting as Contract Administrator, • Carrying out general administration and issuing of drawings, • On-site survey work, • Inspections of contractors' work on-site, • Assisting in the provision of and/or providing fee proposals, • Dealing with technical queries and providing assistance to junior members of staff, • Providing a checking service within the engineering team and across teams, • Reviewing other engineers' work for Licenses, • Developing and maintaining an awareness of the liability the Company attracts when Design Disclosure Documents are issued, and decisions made, • Adopting a helpful and courteous manner when dealing with all outside parties including clients, contractors, statutory bodies, and members of the public Relevant Education & Experience Required: Essential: • A degree in Structural Engineering from a university recognised by the IStructE, • MEng or BEng or BSc university qualification - minimum 2:1, • Minimum 5 years full time employed working experience Training and experience: • Have experience in design and supervision/inspection of structural works on site including:, • Reinforced concrete, • Structural steelwork, • Structural Masonry, • Structural Timber, • Foundations, • Have experience in the inspection of buildings suffering from structural distress and be able to identify the cause and extent of damage including:, • Subsidence, • Roof spread, • Fire damage, • Deleterious material failure, • Explosion, • Overloading, • Experience of managing small and medium sized projects up to £5m, • Have a working knowledge of building defects, what can cause them and what measures should be taken to repair such damages (in-house assistance is also provided), • Possess strong technical knowledge and the ability to apply effectively in practice, • Show evidence of effective and clear report writing skills and the confidence to make recommendations for further action such as any necessary further investigations and/or scope of repairs and remediation, • Be able to draw detailed clear and tidy hand sketches for the purposes of identifying current and proposed construction. Sketches to be annotated with clear and legible handwriting, • Demonstrable experience in producing specifications in adherence with current guidelines, • Be able to produce clear annotated calculations in support of their design sufficient for building regulation submissions and for relaying information to draftsmen for production of drawings, • Be able to produce clear annotated drawings on AutoCAD, • Be proficient in Microsoft Office Suite applications including Microsoft Word, Excel and Outlook etc., • Progression, • 20 days annual leave plus bank holidays. (Increases to 25 days upon completion of probation period), • Birthday day off. (Upon completion of probation period), • Company pension. (Upon completion of probation period), • Sick pay, • Bereavement leave, • Professional Subscriptions, • Cycle to work scheme, • Travel expenses, • Free on-site parking, • Transport links Candidates with experience of; Consulting Engineer, Civil Engineer, Senior Structural Engineer, Building Design Engineer, may also be considered for this role.

Overview: This role is responsible for the high-quality, cost-effective fabrication of components to support the production and maintenance of new and used machinery. Working from technical drawings and sketches, the Fabricator/Welder will contribute to efficient and accurate manufacturing processes in alignment with business needs. Key Responsibilities: • Fabricate components using stainless and mild steel sheets and sections, • Perform welding using MIG, TIG, and Manual Metal Arc techniques, • Execute manual cutting operations using plasma and flame cutting methods, • Weld to insurance and industry standards (e.g., BS5500 / BS EN 286); coded welders will undergo in-house testing for competency, • Interpret technical drawings and translate them into efficient fabrication solutions Skills & Experience: • Strong welding and fabrication abilities, including cutting, marking out, squaring, and bending, • Proficiency in operating metalworking machinery and tools such as guillotines, rolls, brake presses, and hand tools, • Experience working to technical drawings and manufacturing instructions Salary: £36,500-£40,500 - £17 to £18 Per Hour Overtime rate paid at 1.5X times Immediate Start!

A consulting engineering firm in Kingston upon Thames is seeking a Civil/Structural Engineer to design and analyze structural components for various projects.The candidate should have a Master's degree and at least five years of relevant experience.Responsibilities include conducting site inspection

Previously worked as a Welder, Fabricator, MIG Welder, Welder Fabricator, Fabricator Welder, Steel Fabricator, Welding Technician or in a similar role. An exciting opportunity has arisen for a skilled Welder / Fabricator to join a well-established company specialising in bespoke architectural and or

Our reputable client, a specialist in campervan conversions based near Croydon, is seeking a skilled Campervan Conversion Technician / Fabricator to join their busy workshop. This is a superb opportunity for an experienced professional to contribute to high-quality campervan builds within a dedicated, independent environment. The role offers the chance to work on a diverse range of projects, from classic conversions to modern motorhomes, with a team committed to craftsmanship and attention to detail. Benefits as a Campervan Conversion Technician: Competitive salary ranging from £30,000 to £40,500 per annum, dependent on experience Overtime opportunities to increase earnings Flexible working hours, including optional Saturday shifts 20 days holiday plus bank holidays, pension scheme, and SSP Variety of projects, from small conversions to full campervan builds Friendly, supportive team environment Opportunity to work on platforms such as VW, Sprinter, Transits, and moreDuties as a Campervan Conversion Technician: Building, fitting, and maintaining campervans with full conversions and interior fit-outs Fabricating and welding aluminium and steel components for bespoke projects Mechanical tasks including engine conversions, brake systems, and servicing Joinery and cabinetry work for customised interiors Working with 12V electrical systems, including wiring and electrical installation Operating power tools and equipment safely and efficiently Ensuring high standards of craftsmanship and attention to detail in every buildRequirements as a Campervan Conversion Technician: Minimum of 2 years relevant trade experience, ideally in campervan, motorhome, or vehicle conversions Proficient in using power tools, welding, and fabrication equipment Skilled in mechanical tasks and 12V electrical systems Capable of working independently with minimal supervision Versatile and detail-oriented with a focus on quality craftsmanship Experience working with classic or modern campervans, VW conversions, or motorhomes is advantageous Reliable, hardworking, and able to interpret technical instructions accurately Flexible regarding working hours, with optional Saturday shiftsIf you are eager to join a dynamic workshop where your skills will be valued and your work appreciated, this Campervan Conversion Technician / Fabricator role offers the perfect environment to advance your career. We welcome applications from professionals with a broad skill set, even if you possess only some of the listed requirements. Contact Alex Perrin, Automotive Recruitment Specialist at Perfect Placement covering Wallington and Greater London today to discover more about this Campervan Conversion Technician role . Our team of Automotive Recruitment Consultants all share a passion for finding our jobseekers the best jobs in the Automotive Industry. So, if you are looking to improve your career and want to hear about more Motor Trade jobs in your local area, please contact us today

Overview: This role is responsible for the high-quality, cost-effective fabrication of components to support the production and maintenance of new and used machinery. Working from technical drawings and sketches, the Fabricator/Welder will contribute to efficient and accurate manufacturing processes in alignment with business needs. Key Responsibilities: Fabricate components using stainless and mild steel sheets and sections Perform welding using MIG, TIG, and Manual Metal Arc techniques Execute manual cutting operations using plasma and flame cutting methods Weld to insurance and industry standards (e.g., BS5500 / BS EN 286); coded welders will undergo in-house testing for competency Interpret technical drawings and translate them into efficient fabrication solutions Skills & Experience: Strong welding and fabrication abilities, including cutting, marking out, squaring, and bending Proficiency in operating metalworking machinery and tools such as guillotines, rolls, brake presses, and hand tools Experience working to technical drawings and manufacturing instructions Salary: £36,500-£40,500 - £17 to £18 Per Hour Overtime rate paid at 1.5X times Immediate Start

We are currently looking for a number of Steel Erectors to start in South London. You will be erecting a new steel frame. Must have CSCS Erectors Card and IPAF For more information please call Sam Leeson on (phone number removed)

Structural Engineer | Surrey Competitive Salary + Clear Career Progression Our client is a well-established and growing multi-disciplinary engineering consultancy with an excellent reputation for delivering structural engineering, quantity surveying, building surveying and party wall services across the residential and commercial sectors. Due to continued growth, they are now looking to appoint a talented Structural Engineer with 3–5 years’ UK consultancy experience to join their collaborative and ambitious team. The Opportunity This is an excellent opportunity for an engineer looking to take the next step in their career within a modern consultancy that values technical quality, client service and professional development. You will work on a varied portfolio of projects including high-end residential homes, refurbishments, extensions, basements, new build developments and commercial schemes. You’ll gain exposure to all stages of the design process while working closely with senior engineers, architects, developers and private clients. Key Responsibilities Deliver structural engineering designs for a range of building projects Prepare structural calculations, drawings and technical reports Design in steel, concrete, timber and masonry Attend site inspections and client meetings Liaise with architects, contractors and other consultants Support project delivery from concept through to completion Ensure designs comply with current UK regulations and standards Work collaboratively with senior staff and wider internal teams About You Degree qualified in Civil or Structural Engineering 3–5 years’ experience within a UK consultancy environment Experience working on building structures projects Good understanding of British Standards / Eurocodes Proficient in structural design software Strong communication and organisational skills Ambitious, proactive and keen to progress professionally Why Join? Strong pipeline of interesting residential and commercial projects Supportive and experienced leadership team Genuine career progression opportunities Professional development and chartership support Modern, collaborative working environment Competitive salary and benefits packageIf you are a Structural Engineer looking to join a forward-thinking consultancy where you can develop your career and work on high-quality projects, we would love to hear from you

An Approved Electrician is expected to work independently, supervise others, and install electrical systems to a high standard in line with BS 7671 (18th Edition Wiring Regulations). Metal Containment Work (Tray & Basket) Cable Tray Installation • Installing galvanised steel tray systems for supporting large cable runs, • Measuring, cutting, bending, and assembling tray sections, • Installing brackets, supports, and threaded rod systems, • Ensuring correct spacing, load capacity, and structural integrity Cable Basket Installation • Installing wire mesh (basket) containment mainly for data/lighting circuits, • Cutting and forming basket bends, tees, and risers, • Fixing to ceilings, walls, or raised floors, • Maintaining neat cable routing and segregation (e.g., power vs data) Trunking & Conduit • Installing metal trunking systems (surface or flush), • Bending, threading, and installing steel conduit, • Pulling cables through containment safely, • Ensuring compliance with earthing and bonding requirements Additional Responsibilities • Reading and interpreting electrical drawings and schematics, • Marking out routes for containment systems, • Working at height (ladders, towers, MEWPs), • Supervising improvers/mates/apprentices, • Testing and inspection (if qualified), • Maintaining site safety in line with Health and Safety Executive guidelines Skills & Requirements • NVQ Level 3 in Electrical Installation (or equivalent), • 18th Edition (BS 7671) qualification, • ECS Gold Card (Approved Electrician status), • Strong experience with containment systems (tray, basket, trunking), • Ability to work from drawings without supervision, • Good practical skills (cutting, bending, measuring accurately), • IPAF is required

Mechanical Engineering Team Lead Location: Wimbledon / Kingston on Thames locality Salary: £75,000 - £85,000 Base Salary + Benefits Security Clearance: SC (or eligible) Nationality Requirement: UK Nationals only The Opportunity This is more than just a leadership role - it's an opportunity to shape the future of advanced engineering programmes that support critical UK and international capabilities. As a Mechanical Engineering Lead, you will take ownership of a high-performing team, driving excellence across the full engineering lifecycle - from early concept through to development, qualification, production, and in-service support. You will play a key role in developing engineering capability, ensuring best practice, and delivering robust, high-quality mechanical solutions in a highly regulated and technically demanding environment. Key Responsibilities Lead and line manage a team of up to 10 mechanical engineers, supporting performance, development and well-being Oversee engineering outputs including designs, analysis, technical documentation and compliance reviews Drive delivery of complex engineering activities such as development programmes, failure investigations and root cause analysis Ensure projects are delivered to quality, cost and schedule targets Manage resource planning, including recruitment, workload balancing and outsourcing decisions Develop team capability through competency frameworks, training plans and career development initiatives Promote continuous improvement across processes, tools, design practices and engineering standards Contribute to wider strategic engineering initiatives and business objectives What We're Looking For Essential Degree in Mechanical Engineering or a closely related discipline (or equivalent experience) Proven experience developing mechanical or electro-mechanical systems within defence, maritime or aerospace environments Strong CAD experience Solid understanding of mechanical design, design for manufacture, and analysis techniques (including hand calculations and FEA) Experience leading technical teams through full product development lifecycles Ability to review and approve engineering designs, drawings and stress analyses Experience conducting structured root cause analysis and troubleshooting Strong communication, organisational and stakeholder management skills Desirable Chartered Engineer status Experience with CREO, Windchill or similar CAD/PLM systems Knowledge of material properties and treatments, particularly aluminium and steel Awareness of REACH and RoHS standards Experience using FEA, CFD and understanding of manufacturing processes Why Apply? Lead impactful engineering work supporting critical national capability Shape and grow a talented engineering team Work on complex, technically challenging projects Competitive salary and benefits package Clear pathway into senior leadershipServices advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website

We're working with a well-established Architectural and Structural Steelwork contractor who is seeking an experienced Advanced Steel Draughtsperson to join its growing design team. Produce accurate 3D models and detailed fabrication drawings using Advance Steel. Proven experience detailing structura

A leading specialist architectural metalwork contractor based in North London is currently looking for a permanent Contracts Manager to oversee an annual project book of approximately £4 million across multiple high-spec residential and commercial schemes.AM – 4:30 PM (Flexibility required to mee

Steel portal frame and steel frame design (this is the core of the role so experience is a. The candidate is required to have experience in steel design and portal frames. ARD Consulting Engineers is a UK civil & structural engineering consultancy specialising in structural steel design and inspecti

SCI was born out of passion for video games and boxing, with the ambition to create an authentic and exciting boxing game that does justice to the sport we love.What started as a fun prototype has grown into ‘Undisputed’, the first major boxing video game in over a decade.SCI is a welcoming plac

Benefits: Your benefits as a HGV Class 2 Steel Driver will be: • Excellent hourly rates • Weekly pay • Immediate starts • Employee well-being programme Day-to-Day Duties: Your duties as a HGV Class 2 Steel Driver are: • Delivering steel products on flat beds •

Steel Fabricator, Stainless Steel Fabricator, Carbon Steel Fabricator, TIG Welder, MIG Welder, Sheet Metal Worker, Metal Fabrication, Engineering Jobs Dublin, Fabrication Technician, CNC Fabrication, Workshop Fabricator, Site Fabricator, Manufacturing Jobs Ireland. Proven experience in stainless ste

MIG Mild Steel Welder / FabricatorPhoenix Tavinor Engineering LTDLocation: B79 7TAJob Type: Full-TimeSalary: £14. Job OverviewDue to expansion, Phoenix Tavinor Engineering is seeking M

Steel Erector (IPAF) – RequiredWe are looking to recruit an experienced Steel Erector holding a valid IPAF licence for upcoming projects. Duties will include: Installing and erecting structural steel

We are a well-established structural steel and fabrication business with annual turnover of approximately £20-£30m, delivering projects across London and the South East. Structural steel, fabrication, or manufacturing sector experience.

A leading engineering consultancy in Greater London is seeking a Senior CAD Technician responsible for the preparation, detailing, and modeling of Steel and RC structures.

A leading steel solutions company in the UK is seeking an experienced Account Manager for the Hawkes Bay region. The role involves managing key accounts in various sectors, promoting a wide range of steel products, and delivering exceptional customer service while achieving sales targets.

To support product merchandising and stock replenishment at various locations.Submit picking list to warehouse.Relevant work experience is preferred butnot necessary.Able to start work Immediately / shortnotice.

The ideal candidate will possess extensive experience in structural steel and supervision, along with strong interpersonal skills to facilitate site meetings.

A gaming company is seeking a Mid-Senior level Gameplay Network Engineer for their multiplayer boxing game.The role involves optimizing network systems within Unreal Engine to ensure low-latency gameplay.Competitive candidates will have experience with network programming and a strong understanding

You will be responsible for quality assurance in the Steel Business Unit, ensuring high standards for customers. The ideal candidate should have at least 5 years of experience in quality control, preferably in steel manufacturing, strong negotiation skills, and business-level fluency in English.

A leading architectural metalwork and structural steel company in London, specialising in the design, fabrication, and installation of bespoke steel and metalwork projects is currently looking for a draughtsman to join their team. The successful candidate will be responsible for producing accurate t

We are seeking an experienced Structural Steel Estimator to join our growing team in Leicester. The successful candidate will play a key role in preparing accurate, competitive estimates for a variety of structural steel projects across commercial, industrial, and fabrication sectors. Prepare detail

A leading recruitment agency is looking for a Sales Estimator to join a market-leading business in the steel industry. The ideal candidate will have a background in the steel industry and experience in sales and team management.

You will prepare detailed cost estimates for sectional steel tank projects and interpret technical drawings and specifications.

A leading construction firm in Greater London is seeking a Site Engineer / Assistant Package Manager to join the Steel Works Team on the Old Oak Common Station Project. This position is focused on supporting steel construction packages and involves responsibilities such as planning, scheduling, and

The role involves interpreting engineering drawings and working primarily with mild steel.

Sales & Estimating Manager - Structural Steel / Metal Fabrication. A leading structural steel and metal fabrication business is seeking an experienced Sales & Estimating Manager to join its growing team. With a strong pipeline of work and continued growth, this is an excellent opportunity for an exp

The ideal candidate should have hands-on experience in steel or metal fabrication estimating, with a solid understanding of fabrication processes, materials, and customer communication.

We are seeking a skilled and experienced Steel Erector to join our dynamic team. The successful candidate will be responsible for assembling and installing steel structures, including beams, columns, and girders, to form buildings, and other structures. Assemble and Install Steel Structures:.

Integrate Engineering Resources are currently recruiting for 2 Steel erectors or Riggers on behalf of our clients for upcoming shutdown in Thurrock. NVQ 3 or equivalent in Moving Loads/ Steel erecting.

A leading construction company is seeking a Structural Steel Site Manager for a Temp-to-Perm position in East London. The successful candidate will oversee the installation of structural steelwork on high-profile projects, ensuring all work adheres to safety regulations.

An international contractor is seeking an experienced Design Manager to lead structural steel projects from inception to completion.

A growing structural steel manufacturer in South Yorkshire is looking for an experienced Production Process Planner to own the production scheduling process. The ideal candidate will have a strong background in production planning, a solid understanding of steel fabrication processes, and the abilit

Join a well-established steelwork engineering business as an Architectural Steelwork Draughtsman.

We are an Architectural and Steel Erecting Company expanding and looking for people to join the team! We thrive in making sure all clients expectations are met above and beyond. Must have experience within the steel industry.

We are delighted to present an outstanding opportunity for an experienced Draughtsman to join a well-established and successful family-owned steel fabrication company based near Sandwell. Develop detailed 3D CAD models using Tekla or StruCAD from engineering and GA drawings, focusing primarily on st

Steel Fixer required for work in Benton, Newcastle NE12. Must have CSCS card and previous experience working as a Steel Fixer.

Key responsibilities include using burning equipment, marking and cutting steel plates, and performing various repairs.

Candidates should have previous experience with steel erection and preferred Appointed Person (Blue Card) status.

As a Steel Erector, you will play a crucial role in construction projects, working alongside a skilled team to erect steel structures of all sizes and complexities. Possess the ability to accurately read and interpret technical drawings, applying safe preassembly and erection techniques for structur

Ability to interpret structural steel fabrication and erection drawings. We are currently looking for a Structural Steel Site Manager for a Temp-to-Perm position based in East London. This role involves overseeing the installation of structural steelwork on high-profile projects, ensuring all activi

A recruitment agency for engineering positions is seeking experienced Steel erectors or Riggers for immediate work in Thurrock.