Steel jobs in SouthamptonCreate job alerts

Our client owns and operates the Fawley Refinery and is investing in a brand-new fabrication workshop. They are seeking a skilled and experienced Pipework Fabricator to support refinery operations, based within this new, purpose-built workshop facility. This role is focused on the fabrication of pipework systems in a controlled workshop environment. Key Responsibilities • Fabricate ferrous and non-ferrous pipework from isometric drawings and technical specifications using appropriate workshop tools and machinery, typically ranging from ½" to 12" diameter., • Carry out all stages of fabrication including cutting, bevelling, preparing, and assembling pipework components prior to welding., • Accurately mark out, measure, and align pipework to meet required tolerances and specifications., • Assemble pipework systems using appropriate techniques, including tacking and fit-up, in preparation for welding., • Conduct inspection and basic testing of fabricated pipework to ensure compliance with drawings and quality standards., • Collaborate closely with welders to ensure correct joint preparation and overall fabrication quality., • Ensure all work is completed in accordance with workshop procedures, engineering standards, and UK regulations., • Maintain a strong focus on health, safety, and quality at all times., • Keep the workshop environment safe, clean, and well organised. Requirements • Proven experience as a Pipework Fabricator in a workshop environment, with strong hands-on fabrication capability., • Demonstrable experience fabricating pipework from raw materials, including cutting, grinding, bevelling, and fit-up., • Strong working knowledge of ferrous and non-ferrous materials e.g. carbon steel, stainless steel, alloys., • Ability to accurately interpret isometric drawings and translate them into fabricated pipe assemblies with minimal supervision., • Skilled in marking out, dimensional control, and alignment to meet fabrication tolerances., • Experience using standard fabrication workshop equipment such as band saws, grinders, pipe bevellers, and similar machinery., • Good understanding of weld preparations, joint configurations, and supporting welding activities., • Relevant apprenticeship or formal qualification in fabrication e.g. NVQ / SVQ Level 3 in Fabrication, Mechanical Engineering, or equivalent., • Strong awareness of QA/QC standards and fabrication best practices within a workshop environment., • Experience working to permit systems and maintaining high health and safety standards., • Strong work ethic, attention to detail, and ability to work collaboratively within a team. Additional Information • This is an excellent opportunity to join a leading organisation and be part of a new, dynamic workshop team., • The role is inside IR35 and paid via PAYE., • Site location: SO45 1TX., • A full UK driving licence is required due to site access and commuting requirements.

We are looking for a Temp to Perm Warehouse Operative with a Forklift License for our client who are the UK's largest stockist of wrought iron components based in Southampton SO15. • General Warehouse duties, • Operating Forklift, • Operating Overhead Crane, • Ideally some experience with a Band saw, • Ideally some Steel experience The working hours are Monday to Friday, 8am to 5pm and this role could lead to permanent employment for the right candidate. There is potential to lead to permanent work for the successful candidate where you will receive: -25.5 days holiday + Bank Holidays -Company Sick Scheme -Pension Scheme Please call Berry Recruitment Southampton today or apply with your CV. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.

Industrial or Thermal Paint Sprayer Wanted Hourly Pay Rate: £13 to £17 per hour (depending on experience up to Thermal Paint Sprayer qualification / trained) Based in Southampton. Shift Pattern: Monday to Friday, 47.5-Hours per Week, starting at 7am / Finish 4:30pm (but this may vary). Full-time Temporary to Permanent Employment. Overview • We are seeking applicants who want to work in a challenging industrial painting, coating, and workshop environment., • This is a Full-time PAYE employed opportunity (not self-employed or zero hours contract)., • Extra hours are available at weekends if wanted., • Payroll through us the agency on a weekly basis. Employment backgrounds we will consider due to transferable skills: • Thermal Paint Sprayer., • Industrial Applicator., • Industrial Spray Painter., • Industrial Paint Technician., • Coating Specialist., • Structural Steel Painter. Essential Requirements: • Must live in the Hampshire area., • Eligible to work in a full-time permanent role in the UK., • Will need to supply right to work proof (and HMRC share code if requested)., • Complete an online registration form as part of your employment contract., • Be able to work in confined spaces., • Complete physical duties lifting 25kg and working on your feet all day., • Must be able to work Monday to Friday, starting at 7am, and work 47.5-hours per week, at the workshop site in Southampton. All CVs will be assessed and considered for the role, with potential start dates as soon as possible.

Fabricator/Welder Our client, a leading engineering company, is seeking an experienced Fabricator/Welder to join their team on a contract basis. As an apprentice-trained fabricator welder, you will be responsible for carrying out general engineering tasks, assisting current welders to meet coded standards. This is an excellent opportunity to contribute to the manufacturing of large high tension cable connections. Key Responsibilities: • Perform MIG/TIG Welding to a high standard, • Utilize MMA, Braising, and gas welding skills, • Work primarily on Mild Steel, and occasionally on other materials such as Stainless Steel, • Carry out additional fabrication tasks as requiredJob Requirements:, • Apprentice trained fabricator welder, • Significant experience in MIG/TIG Welding, • Experience in MMA, Braising, and gas welding is advantageous, • Ability to work with Mild Steel and other materials, • Strong fabrication skills, • Willingness to perform hand grinding and simple machine shop tasks This contract is initially for 6 months but could be extended based on work volumes.The working hours are 39 per week, from 7.15am to 4.15pm (Monday to Thursday) and 7.15am to 12.15pm (Friday).Pay: £17.89 per hour (PAYE) If you have the required skills and experience, please apply now!

Fawley Refinery, HampshireRole Overvie wWe are seeking a Junior Civil / Structural Engine er to join the Engineering Services team supporting refinery and chemical plant operations at Fawley. This role is suited to an early-career engineer with a solid technical foundation an d at least 3 years of relevant experien ce, looking to further develop within an operating oil refinery environment.The role involves supporting plant operations, inspections, maintenance, and project delivery, working under the guidance of senior engineers in a safety-critical, highly regulated setting.Key ResponsibilitiesPlant Engineering & Operations SupportProvide civil and structural engineering support to daily refinery operations, including plant modifications, upgrades, repairs, and new constructionAssist with structural inspections , condition assessments, and evaluations of plant facilitiesSupport civil/structural design and construction activities to ensure compliance with company standards, industry codes, and UK regulationsSupport operational teams with risk management activities in line with Operation Integrity Management System (OIMS) requirementsEngineering Management & Change ControlReview and support Management of Change (MoC) documentation, engineering specifications, and design appraisalsAssist in interpreting and applying company practices and industry standards to refinery facilitiesSupport site reliability initiatives, including incident investigations, risk assessments, and risk-based work selectionProjects & Continuous ImprovementProvide civil/structural engineering input to sustaining and capital projects , from concept through executionAssist with development of scopes of work, technical specifications, and contractor documentationSupport contractor activities and review engineering deliverables under supervisionContribute to continuous improvement of plant reliability, safety, and engineering work practicesQualifications & ExperienceRequiredBSc in Civil or Structural Engineering (MSc preferred)Minimum of 3 years professional experience , preferably within heavy industry, oil & gas, petrochemical facilities, power generation, or an engineering consultancy supporting such sectorsSolid technical and analytical skills with the ability to assess and compare engineering solutionsFamiliarity with structural analysis and design principlesStrong written and verbal communication skills in EnglishAbility to work effectively in a safety-critical industrial environmentPersonal AttributesSelf-motivated with a focus on delivering quality engineering outputsStrong teamwork and collaboration skillsProactive, logical approach to problem-solvingClear commitment to safety, engineering integrity, and best practicePreferred Knowledge & SkillsExperience or working knowledge in the following areas is desirable:Structural design and analysis of steel and reinforced concrete structuresFoundations and pile designStructural inspection, condition assessment, and rehabilitationBasic geotechnical engineering principlesCivil infrastructure (roads, drainage, sewers, underground structures)Industrial buildings, stacks, chimneys, and rotating equipment foundationsFamiliarity with structural analysis and design softwareWhat We OfferDevelopment within an operating oil refinery environmentExposure to complex industrial assets and real-world engineering challengesOngoing mentoring and technical support from senior engineersStrong safety culture with a focus on long-term asset integrityCompany InformationAltrad is an international leader in the provision of industrial services, generating high-added value solutions principally for the Oil & Gas, Energy, Power Generation, Process, Environment and Construction sectors. The Group is also a recognised leader in the manufacturing of equipment dedicated to the Construction and Building market. Altrads multidisciplinary services range from engineering and technical services to maintenance, access solutions and specialised services for industry leaders. Headquartered in France, the Group employs around 65,000 people and is still led by its Founder and President Mohed Altrad.TPBN1_UKTJ

Our client is a successful and well-established automotive company that is going from strength to strength. They are looking for an experienced and skilled Panel Beater / MET Technician to join their team. You will ensure the repair of motor vehicles of all types is carried out to motor manufacturer industry standards or repair methods. Salary: Circa £55,000 depending on experience + Bonus (Higher salary may be available for very experienced individuals - up to £60,000) Hours of work (to be confirmed): 8:00am – 5:30pm, Monday to Friday, possibly 1 Saturday a month if targets not hit. PLEASE ONLY APPLY IF YOU HAVE THE FOLLOWING EXPERIENCE: Previous recent experience as a Panel Beater, including welding Current AOM009 welding certificate, or BS equivalent Training in MIG braze, spot welding, rivet and bonding, high strength and Boron steel awareness Motor manufacturer’s qualifications and experience Light MET qualification linked to ATA Bonding certification Full UK Driving licence Responsibilities include: Strip & refit where necessary including adjustment and panel alignment. Report any defects or damage linked to associated job but not down for repair. Observe, recognise and report on vehicle structure and paintwork. Ensure that vehicles comply with safety standards when returned to customers, or that faults have been reported and noted on the job card. Removal ...

Job Title: Pipefitters Location: Southampton Pay: £27ph Hours: 07:30-16:30 45 hours paid Duration: 6 weeks Site duties: Steel screwed Pipework , on offices Quals: CSCS Start: Monday...

Quantity Surveyor - Facades Romsey, Hampshire Salary up to £65,000 + Car Allowance + 25 Days Holiday + Pension Blaymires Recruitment is working with a specialist Facades Contractor based near Romsey who is searching for a Quantity Surveyor to join the team. The business undertakes a variety of rainscreen cladding, curtain walling, steel framing systems, insulated render and wall panelling projects across the South West and London areas. Projects range in value from £500k to £10m. The company is steadily growing and is currently looking for a Quantity Surveyor with Main Contracting or Facade experience to join the business. You will report to the commercial manager and be responsible for the financial control of projects between £500k to £5m. The Role: Responsible for the financial control of projects. Working with JCT, NEC contracts. Applications for payment in accordance with contract terms and conditions. Production of monthly cost reports and forecasting. Preparation of delay notices in accordance with contract terms. Processing monthly subcontractor payments. Picking up and valuing variations. Settling final accounts with main contractors. Site measures. Experience: Previous experience with cladding, glazing or roofing desirable. Previous experience working with JCT and/or NEC contracts. Minimum of 3 year working as a Quantity Surveyor. On Offer ...

External Site Manager - Southampton - Facade/Steel Frame/Recladding/Remediation/High Rise Demolition. The Role - External / Facade Site Manager. My client are looking for an External Site Manager, to join the team in Southampton.

External Site Manager - Southampton - Facade/Steel Frame/Recladding/Remediation/High Rise Demolition The Company My client oerate with a dual capability, acting as both a Principal Contractor and a Specialist Subcontractor, allowing them to manage complex projects from design through to completion. The Role - External / Facade Site Manager My client are looking for an External Site Manager, to join the team in Southampton. Oversee day-to-day site operations Ensure strict compliance with health, safety, and environmental regulations. Monitor progress against programme Conduct risk assessments and implement mitigation measures * Quality Assurance This role can be permanent or freelance (12-18months) External Site Manager - Cladding / High Rise Demolition / Remediation For the purposes of the Conduct Regulations 2003 Premises Recruitment Limited acts as an employment agency for permanent recruitment and as an employment business for temporary recruitment. By applying for this job you agree to our Privacy Policy...

A recruitment firm for engineering contract work is seeking experienced Pipe Fitters for a refinery shutdown. The role involves working from drawings, cutting, bending, and assembling carbon and stainless steel pipework, along with testing systems for leaks. The ideal candidates will hold a CCNSG ca

Principal Design Engineer £65–75K + benefits and Relocation & Visa available Southampton (Hybrid) Fast‑growing clean‑tech maritime business developing wind‑assisted propulsion systems is seeking a hands‑on Principal Design Engineer to lead structural/mechanical design of major subsystems. You’ll own 3D/parametric modelling, structural analysis, and class‑compliant design, taking concepts through to production‑ready hardware with real‑world feedback. ABOUT YOU Degree in Mechanical / Structural / Marine / Naval Architecture 5–10 years designing marine/offshore structures Strong 3D CAD & parametric modelling (NX, Inventor, similar) Structural analysis: FEA + hand calcs Experience with DNV / Lloyd’s Register / NK Background in large steel structures / welded assemblies Ability to turn load cases → validated designs Comfortable in a fast‑paced, hardware‑focused environment YOUR NEW ROLE Lead mechanical/structural design of key subsystems Develop wing geometry & structural philosophy Define load cases and ensure classification compliance Perform/oversee stress & fatigue analysis Engage directly with class societies Mentor junior engineers WHY JOIN? Real climate‑impact hardware High ownership in a small engineering team Full lifecycle exposure: concept → build → test → iteration Reference Number: PDCW To be considered for this position or other opportunities, contact Tash Johnson at Equal Resourcing Ltd or click "Apply Now." Equal Resourcing Ltd is serving as a recruitment agency for this job opening. Your application implies your consent for us to process your data and communicate with you concerning this application and associated services, in compliance with GDPR regulations. Equal Resourcing Ltd may use AI-assisted tools to support internal administrative tasks and document drafting. We do not upload personal data or use AI tools to make hiring decisions. To view a list of job openings, please visit the Equal Resourcing Ltd website. Please note that not all recruitment positions are listed. For the most current opportunities, we recommend contacting us directly