Technical engineer jobs in Burgess HillCreate job alerts

Site Engineer (Commissioning / BMS Integration)About the Role We are seeking a skilled Site Engineer / Commissioning Engineer to support the delivery and integration of advanced energy monitoring and data acquisition systems across commercial and residential buildings. This role involves commissioning and integrating specialist hardware and software with building systems, ensuring accurate data capture and reliable communication to monitoring and billing platforms. It's ideal for an engineer with experience in BMS, metering, or controls integration who enjoys hands-on problem solving, working on-site, and collaborating with remote technical teams. Key Responsibilities • Commission and configure energy monitoring and data logging systems on-site, • Integrate solutions with Building Management Systems (BMS), • Configure and test communication protocols including M-Bus, Modbus, BACnet, • Integrate utility meters (heat, electricity, water, gas) into monitoring platforms, • Verify accuracy of data collection and transmission, • Diagnose and resolve communication and integration issues, • Work closely with project managers, technical teams, and subcontractors, • Produce commissioning reports and site documentation, • Provide remote support, troubleshooting, and system optimisationSkills & ExperienceEssential, • Experience working with BMS or building controls systems, • Knowledge of metering systems and data logging, • Familiarity with communication protocols (Modbus, M-Bus, BACnet), • Strong fault-finding and problem-solving ability, • Basic networking knowledge (IP addressing, routers, switches), • Full UK driving licence, • Willingness to travel to sites across the UKDesirable, • Experience with energy monitoring or billing platforms, • Background in electrical or controls engineering, • Experience commissioning building energy systems

Responsibilities: We have an immediate opening within our Engineering Team for a site-based engineer to work with our lighting and energy monitoring and integration products on a wide range of sites from high end residential apartments to commercial office blocks, trading estates and universities.The candidate should ideally have and electrical background with experience working remotely on customer and building sites. The position would suit someone who wants to grow into a career in engineering, particularly smart building technology. The role comprises the following key elements: -1. Installation: Execute small on-site installations and modifications of energy monitoring systems and associated panels, ensuring compliance with technical specifications and safety standards.2. Commissioning: Attend sites and commission Synapsys metering, logging, integration and lighting equipment. Configuring Modbus/Mbus/DALI and IT networks to ensure correct system operation.3. Fault Finding: Diagnose and resolve technical issues related to lighting and energy monitoring (MODBUS/Mbus/DALI), systems, employing troubleshooting skills to identify and rectify faults efficiently.4. Integration: Collaborate with cross-functional teams to seamlessly integrate energy monitoring solutions into existing infrastructure, ensuring optimal performance and data accuracy.5. Nationwide Travel: Willingness to travel nationwide for on-site project activities, ensuring timely completion and customer satisfaction.6. Documentation: Maintain accurate and detailed project documentation, including installation records, troubleshooting reports, and integration documentation.7. Customer Support: Provide technical support to clients, offering guidance on system usage, addressing queries, and ensuring customer satisfaction. Qualifications: 1. Proven experience in electrical panels and some electrical installation, with a focus on energy monitoring systems.2. Relevant electrical certifications and energy monitoring technologies.3. Strong understanding of energy management principles and sustainable practices.4. Proficiency in fault finding and troubleshooting techniques.5. Excellent communication and interpersonal skills.6. Ability to work independently and as part of a team.7. Good awareness of H&S safe systems of work. 8. Full driving licence.9. Willingness to travel nationwide for extended periods. Preferred Skills:1. Experience with the installation and maintenance of energy monitoring hardware and software.2. Familiarity with data communication protocols used in energy monitoring systems. (Modbus, Mbus, MQTT).3. Understanding of IT networking.4. Project management skills to ensure timely and efficient project execution.5. Knowledge of relevant industry standards and regulations.

Fire & Security Systems Designer £40,000 - £50,000 depending on experience, Burgess Hill or London, Full-time, Permanent, 20 days holiday + Bank Holidays (rising with service to 25 days) + Birthday off, Profit Share Scheme, Pension scheme The Role We are working with a well-established fire systems business operating across high-end commercial and residential projects to recruit a Fire & Security Systems Designer. This is a full-time, permanent role based at either their Burgess Hill Head Office or London Satellite Office, with travel to sites across the UK. The successful candidate will join a collaborative technical team and play a key role in delivering compliant and coordinated life safety system designs. Key responsibilities include: • Designing fire alarm, security, voice alarm, and related life safety systems to British Standards (BS 5839, BS 8629, BS 6266, etc.), • Producing design documentation, device layout drawings, cable schedules and BOQs, • Liaising with clients, consultants, and site teams to ensure design compliance, • Conducting site surveys and attending design/progress meetings, • Supporting tender and project delivery teams with technical input, • Ensuring designs meet regulatory and client specifications, • Using AutoCAD and other design tools to produce accurate layouts, • Providing technical advice and design validation, • Coordinating with internal departments to ensure smooth project delivery, • Maintaining up-to-date knowledge of industry standards and innovations Requirements Previous experience in fire alarm and/or security system design (Level 3) is highly desirable, along with a good working knowledge of relevant British Standards and industry regulations. Proficiency in AutoCAD (2D) and design software tools is desirable. FIA or equivalent technical qualifications are highly desirable. A full UK driving licence and willingness to travel are essential. This role could suit someone who has worked as a Fire Systems Designer, Security Systems Designer, M&E Designer or Life Safety Systems Engineer. Company Information This employee-owned business is known for its collaborative culture and strong technical expertise. Operating across high-end commercial and residential projects, they offer career progression, a supportive team environment, and a unique profit-share structure that rewards contribution and commitment. Package • £40,000 - £50,000 depending on experience, • 20 days holiday + Bank Holidays (rising with service to 25 days), • Birthday off, • Pension scheme, • Profit-share structure, • Career progression opportunities, • Supportive and collaborative work environment, • Travel across UK sites, • Office base in Burgess Hill or London Travail Employment Group is operating as an Employment Agency. Once you click to apply for this job your application will be immediately received by Travail Employment Group. If your application is successful a consultant will be in contact with you within the next 7 days. If you do not hear within 7 days you have unfortunately not been successful on this occasion.

About The RoleJob Title: Baler and Compactor Field Service EngineerDivision: phs Wastekit – CroydonPurpose of RoleService Engineers are responsible for servicing and maintaining recycling equipment on a reactive and scheduled basis. They will work towards achieving their own targets as well as customer SLA’s. Service level agreements are agreed and set with our customers and must be achieved. Service Engineers will work closely with the Service Planning Supervisor, Technical Manager and Operations Director to ensure an efficient and safe delivery. Customer Service • To liaise with the call controllers and Field Service Supervisor’s to provide the best service to the customers., • The engineer is expected to help plan their daily work to maximize customer service, achieve the highest standards and productivity using electronic and verbal communications as appropriate., • The engineer should always try and take ownership of engineering issues so that the customer is provided with good service., • Engineers are expected to achieve targets set by their Field Service Supervisor and be aware of all customer service level agreements and aim to adhere to them always., • May be required to work out of area during periods of varying workload volumes and during engineer shortages which can require overnight stays.Records and Documentation, • To complete all paperwork and electronic data as required by Wastekit or the customer according to the company procedures., • Accurately record time, parts used and any other details either electronically or manually as required., • Prompt action should be taken to ensure replacement parts are acquired to replenish van stock or parts specially ordered to return to a breakdown being mindful of any customer SLAs., • Pass on any new business leads to sales department.Skills/Knowledge and Qualifications Required, • Shall have good fault-finding and diagnostic skills, • To be able to understand hydraulic and electrical circuit diagrams., • Will be able to show and apply sound knowledge of mechanical, electrical and hydraulic principles, • Can use and understand various electrical and hydraulic test equipment, • Update engineering knowledge when able., • Always use cost effective but safe measures to carry out tasks., • Can work with the minimum of supervision., • To attend meetings and training courses as required by your Field ServiceStandards, • Comply with all requirements in the Work Instruction for Engineer Responsibilities., • Comply with instructions given by Field Service Supervisors, Managers and Directors., • To maintain and use company issued equipment and vehicles in a safe manner and according to PHS Group policies., • To take responsibility for the safe keeping of stock and be accountable for stock balances., • To keep accurate records (using stock usage sheets and or electronic recording as appropriate) of when and where the stock is used., • Any documentation which is required to be returned to the office is done so in time., • Vans should be kept clean, tidy and maintained as per MFM-02 Commercial Vehicle Transport Policy and appropriate care taken of PPE, tools and stock.Desirable Knowledge and Qualifications, • Ideally from a service engineering, electrical or hydraulic background with an ability to demonstrate the skill of fault finding and repair., • City & Guilds in electrical and mechanical engineering., • Competent in the use of electrical and hydraulic test equipment., • A sound knowledge of single and three phase electrical equipment and hydraulic circuits., • A mature disciplined approach and good personal administrative and customer care skills., • 17th edition electrical regulations/City & Guilds electrical and mechanical engineering.In return for your commitment and expertise, you will receive, • A competitive salary of £40.000.00 OTE £45,000.00, • We offer accredited ILM Training in house and external training., • Ongoing career and development opportunities., • Digital GP for you and your family., • Over £1000 worth of savings and discounts at Supermarkets and High Street stores with PHS Perks., • Company pension., • 24-hour wellbeing helpline., • All kit required for working effectively on the road.If you want a career with a well-established company, where you’ll be appreciated for the quality of your work, we would love to hear from you. Apply now.phs Group was founded in 1963 and we are the leading provider for Hygiene Services in the UK, Spain and Ireland with over 120,000 customers across 300,000 locations incorporating numerous businesses during its 63 years of business.Our businesses include: Washrooms, Healthcare, Floorcare, phs Direct, Direct 365, phs Greenleaf, Teacrate, Besafe, Wastekit and Compliance.At phs, we pride ourselves on our diverse workforce, and ensuring we have an inclusive environment for all our staff. We remain committed to ensuring our teams can bring their true selves to work without risk or fear of discrimination.

2nd Line Support Engineer £25,000 - £32,000 + discretionary bonus, Burgess Hill, Monday to Friday 9am-5:30pm, Permanent, 28 days holiday including bank holidays, Bonus scheme, own transport required The Role A fantastic opportunity for a 2nd Line Support Engineer to join a specialist technology organisation providing advanced support across cloud, security, and on-premise environments. This role sits within a dedicated technical team and reports directly into senior technical management. The successful candidate will handle escalated issues, contribute to compliance processes, and support automation-focused improvements across the business. • Resolve escalated technical issues across server, cloud, and network environments, • Use scripting tools to automate tasks and improve internal workflows, • Assist in maintaining internal security and compliance frameworks, • Support the implementation and ongoing management of industry standards, • Manage and optimise remote monitoring and management tools, • Troubleshoot and support telephony and connectivity issues, • Contribute to infrastructure projects and improvements, • Maintain accurate documentation and audit records, • Review technical trends and contribute to service improvements, • Support the wider technical team with complex troubleshooting Requirements The ideal candidate will bring solid 2nd Line experience with exposure to cloud environments, networking, automation, and security practices. Experience with Microsoft cloud tools, networking fundamentals, compliance frameworks, and scripting would be highly desirable. This role could suit someone who has worked as an IT Support Technician, Technical Support Engineer, or Infrastructure Support Analyst. Company Information You will be joining a forward-thinking, security-minded organisation operating within the technology sector. The company places strong emphasis on innovation, compliance, and continuous improvement, offering a supportive environment where technical growth and professional development are encouraged. Package £25,000 - £32,000 Discretionary bonus scheme 28 days holiday including bank holidays Pension scheme Ongoing training and certification support Modern technical environment with focus on automation Permanent contract Own transport required Travail Employment Group is operating as an Employment Agency. Once you click to apply for this job your application will be immediately received by Travail Employment Group. If your application is successful a consultant will be in contact with you within the next 7 days. If you do not hear within 7 days you have unfortunately not been successful on this occasion.

Job Title: Quality Engineer Location: Coventry Salary: Competitive Contract: Permanent Role Overview – Quality Engineer Are you an experienced Quality Engineer looking to take ownership of quality performance in a highly regulated engineering environment? This is an excellent opportunity to join a leading aerospace manufacturer as they continue to strengthen their quality function and drive world‑class standards across their operations. As a Quality Engineer, you’ll play a key role in ensuring product safety, compliance and reliability across the full value stream. You’ll act as a technical specialist for product and process quality, supporting both day‑to‑day operations and long‑term improvement initiatives. This is an on‑site position based in Coventry, working closely with engineering, operations, suppliers and customers to uphold industry-leading standards. Key Responsibilities – Quality Engineer • Supporting compliance with AS9100, AS13100, AS9102 and other aerospace quality standards, • Conducting Layered Process Audits, product audits and process audits, • Reviewing First Article Inspection Reports (FAIRs) to AS9102 requirements, • Leading containment, root cause analysis and corrective action using tools such as 8D, 5-Why and Cause & Effect, • Driving Zero Defect and continuous improvement initiatives across the value stream, • Analysing key quality metrics such as First Pass Yield, defect rates and audit findings, • Collaborating with engineering, operations, customers and suppliers to resolve issues and improve quality performance, • Supporting APQP activity including PFMEA, Control Plans and PPAP, • Ensuring documentation, records and compliance evidence are accurate and up to standard. Key Experience & Qualifications – Quality Engineer • Experience in aerospace or another highly regulated engineering sector, • Strong knowledge of AS9100, AS9102 and general quality management system requirements, • Proficiency in APQP, PFMEA/DFMEA, PPAP and root cause analysis tools, • Ability to interpret engineering drawings and technical specifications, • A proactive, hands‑on approach with excellent communication and stakeholder‑management skills, • Engineering/technical degree or equivalent industry experience. Benefits – Quality Engineer • Outstanding Pension Contribution Plan, • Company Bonus Scheme, • Income protection and life assurance (3x basic salary)., • Share purchase program., • Early finish on Fridays., • Flexible working hours., • 25 days annual leave plus public holidays., • Employee Assistance Program for health and well-being support., • Structured career development opportunities., • Employee discounts on a wide range of products and services., • Employee referral program. For more information on this role, please contact Ben Dawson on 01453 829522 or send your CV to For details of other opportunities available within your chosen field, please visit

About the role: We’re looking for an experienced High Voltage Design Engineer to join our Engineering Design team in Haywards Heath. This is a technical role for someone who has moved beyond general electrical installation design and into power system engineering: substations, protection schemes, and grid connections up to 132kV. You’ll take ownership of electrical designs from concept through to commissioning support, working on ICP and renewable power projects. Your designs will be built and commissioned on site, so practical understanding of how substations and power systems behave in the field is essential. We are also open to hearing from candidates interested in a Junior HV Design Engineer role. Key responsibilities: • Produce electrical designs up to 132kV including substation layouts, single line diagrams, and protection wiring schedules, • Carry out power system studies in DigSilent, ETAP, or PSCAD: Load flow, fault level, protection coordination and dynamic simulations, • Design complete protection systems from first principles: Relay selection, CT sizing and interface schemes with DNO systems, • Prepare Functional Design Specifications (FDS), protection philosophies, and grid connection documentation (G99, G5/4, P28), • Design earthing systems, cable routes, and substation layouts considering site constraints and buildability, • Support procurement with technical specifications for switchgear, transformers and protection relays, • Provide technical support during commissioning: responding to site queries, reviewing test results, and verifying protection settings What you’ll need: • Degree in Electrical and Electronic Engineering with a power systems specialism (or equivalent experience), • Strong technical capability in power system design, not just general electrical installation, • Experience producing designs that have been constructed and commissioned on site, • Proficient in AutoCAD and power system software (DigSilent, ETAP, or similar), • Solid understanding of UK regulations, DNO standards (G81), and ENA requirements What we offer: Competitive salary, profit-related pay, private medical, income protection, 4x death in service cover, 28 days holiday, pension, cycle to work, and proper support for chartership and CPD.

AI Engineer Job Tenure: Full-time, permanentSalary: CompetitiveCompany Description Ready to join a team thats leading the way in reshaping the future of insurance? Here at esure Group, we are on a mission to revolutionise insurance for good! We’ve been providing Home and Motor Insurance since 2000, with over 2 million customers trusting us to keep them covered through our esure and Sheilas’ Wheels brands. With a bold dedication for digital innovation, were transforming the way the industry operates and putting customers at the heart of everything we do. Having completed our recent multi-year digital transformation, we’re now leveraging advanced technology and data-driven insights alongside exceptional service, to deliver personalised experiences that meet our customers ever-changing needs today and in the future. Job Description We currently have a phenomenal opportunity for an AI Engineer to join our us as we enhance our customer experience by harnessing the power of NLP, large language models, and flawless integration with third-party GenAI services. In this dynamic role, youll be involved in every stage of the AI lifecycle, from brainstorming ideas and crafting prompts to fine-tuning models and deploying them into production. Success in this role is measured through rigorous A/B testing, ensuring our solutions deliver real value. Youll have the opportunity to work on a variety of impactful projects across the entire enterprise. We are seeking an innovative individual who shares our vision to fix insurance for good. What you’ll do: Collaborate with business partners to identify use-cases where GenAI can provide measurable benefits. Support the data science and AI team in deploying scalable AI applications across the enterprise. Work with a multi-functional team (DevOps, data engineers, developers, testers, Infosec) to productionize AI services on AWS. Enhance our tech stack, including MLOps, CI/CD pipelines, UI, and AI Python libraries. Develop prompts, fine-tune models, and track results. Evaluate third-party GenAI and LLM technologies for cost-benefit analysis. Deliver projects from scoping and R&D to production deployment and benefit measurement. Follow and contribute to standards for code quality, R&D, and model development. Engineer data for optimal AI application performance. Advise peers and senior management on business and customer impact. Write production-grade Python code, leveraging CI/CD, Databricks, and ensuring appropriate test coverage; proficiency in SQL. Liaise with third-party partners and stay updated on field advancements and regulations. Collaborate with data governance and data management teams on data requirements. Qualifications What we’d love you to bring: You are a self-starter with experience in delivering research + models to production to drive tangible commercial benefits and improved customer experiences. You thrive in working autonomously and collaboratively to drive impact in a fast-paced multi-functional business. PhD or MSc experience in a numerate subject: Machine Learning, Computer Science, Statistics, or equivalent, Demonstrable experience of applying, researching, and developing sophisticated NLP models, prompt engineering + fine-tuning LLMs to drive value in a commercial setting, Able to work independently and efficiently to deliver projects on time, taking project briefs and refining them to strong results. Experienced in engaging with non-technical stakeholders to scope, design and build an appropriate ML solution. Proficient with Python data science stack, e.g., pandas, scikit-learn, Jupyter etc., and version control, e.g., Git. Exposure to LLMOps, model monitoring principles, CI/CD and associated tech, e.g., Docker, MLflow, k8s, FastAPI etc. Knowledge of Langchain, huggingface and LLM offerings by 3rd party vendors. Knowledge of OO programming and software design, i.e., SOLID principles. Knowledge and working experience of AGILE methodologies. Familiarity with Databricks, and RAG application architecture a plus Experience with latency optimisation and quantisation preferred Additional Information What’s in it for you?: Competitive salary that reflects your skills, experience and potential. Discretionary bonus scheme that recognises your hard work and contributions to esure’s success. 25 days annual leave, plus 8 flexible days and the ability to buy and sell further holiday. Our flexible benefits platform is loaded with perks to choose from, so you can build a personal toolkit to support your health, wellbeing, lifestyle, and finances. Company funded private medical insurance for qualifying colleagues. Fantastic discounts on our insurance products! 50% off for yourself and spouse/partner and 10% off for direct family members. We’ll elevate your career with hands-on training, mentoring, access to our exclusive academies, regular career conversations, and expert partner resources. Driving good in the world couldn’t be more important to us. Our colleagues can use 2 volunteering days per year to support their local communities. Join our internal networks and communities to connect, learn, and share ideas with likeminded colleagues. We’re a proud supporter of the ABI’s ‘Make Flexible Work’ campaign and welcome you to ask about the flexibility you need. Our hybrid working approach also puts you in the driving seat of how and where you do your best work. And much more; See a full overview of our benefits here Reward and benefits | Esure Group PLC We are committed to creating an inclusive and diverse workplace where everyone feels valued, respected, and empowered. We celebrate individuality and create spaces where unique backgrounds and experiences can come together. We believe that diverse perspectives drive innovation, in turn enabling us to better serve our customers, community and build a stronger organisation. Our commitment to inclusion extends to every part of our business, from hiring practices to professional growth opportunities, ensuring equal access and support for all.

Are you an experienced Product Engineer with a strong background in electrical and mechanical engineering? This is an exciting job opportunity to join a leading technology provider delivering innovative charging solutions for the rail industry, with expanding applications across the bus and public transport sectors. This international engineering business specialises in charging and power solutions for transport applications, primarily within the rail industry and increasingly within bus and fleet sectors. The organisation develops tailored charging systems built around power supply units (PSUs), integrated with bespoke cabling, connectors, and mechanical or electrical modifications to meet unique customer requirements. Key responsibilities of the Remote Product Engineer - Charging Solutions job: Provide technical engineering support for global charging system projects. Analyse customer requirements and convert them into practical engineering solutions. Select appropriate power supply units (PSUs) and evaluate power consumption and distribution. Specify and design cabling, wiring, and connector systems for charging solutions. Support mechanical and electrical customisation work for customer-specific projects. Develop 3D CAD models using Solid Edge (or equivalent CAD platforms such as SolidWorks). Present technical concepts and engineered solutions to customers both virtually and in person. Participate in project kick-off meetings to ensure accurate technical scoping and delivery. Collaborate closely with internal engineering, product, and sales teams throughout the project lifecycle. Skills & experience required for the Remote Product Engineer - Charging Solutions job: Strong background in mechanical and electrical engineering. Experience analysing power consumption, power distribution, and PSU selection. Proficiency with 3D CAD software (Solid Edge preferred, SolidWorks acceptable). Strong understanding of connectors, cabling, and electrical integration. Confident communication skills with the ability to present technical solutions to customers. Ability to translate complex requirements into practical engineered products. If this Remote Product Engineer - Charging Solutions job could be of interest, please send your CV to or call Ben on 01582 878816 for more details.c272c101-f45c-4783-b4a0-50ad222b87c0

Lead technical decision-making, balancing hardware, firmware, and system constraints. Overview We are seeking a highly skilled Lead Embedded Software Engineer to take technical ownership of embedded software architecture and development within a high‑performance engineering environment. Key

Key Responsibilities Electronics Architecture & Technical Leadership Own the electronics architecture for new and existing product lines. Overview We are seeking a highly experienced Lead Electronics Engineer to take technical ownership of electronic hardware design across a suite of complex indu

Are you a skilled and licensed Plumber/Gas Engineer looking for an exciting opportunity to showcase your expertise? We have an outstanding position available for a talented Plumber/Gas Engineer to join our team. If you are passionate about ensuring safety, efficiency, and quality in plumbing and gas installations and repairs, this might be the perfect role for you. Make sure to apply with all the requested information, as laid out in the job overview below. Company Overview: At Sterling Plumbers, we are a leading provider of heating and plumbing solutions, committed to delivering top-notch services to our valued customers. With a strong reputation for excellence and a focus on customer satisfaction, we take pride in our team of skilled professionals who work together to achieve outstanding results. Position: Plumber/Gas Engineer Location:Haywards Heath Key Responsibilities: • Conducting thorough inspections, installations, maintenance, and repairs of gas systems and appliances according to safety standards and regulations., • Diagnosing and troubleshooting gas-related issues efficiently and accurately., • Ensuring compliance with industry guidelines and safety protocols during all gas-related work., • Collaborating with other team members and departments to deliver exceptional service to our clients., • Providing expert advice and recommendations to customers on gas-related matters, including energy-saving practices and equipment upgrades., • Completing all necessary documentation and reports in a timely and organised manner., • Valid Gas Safe registration and relevant certifications as a Gas Engineer., • Proven experience in gas installations, repairs, and maintenance., • Strong understanding of gas safety regulations and industry standards., • Excellent problem-solving skills and attention to detail., • Ability to work independently and as part of a team, ensuring a positive and cooperative work environment., • Outstanding communication and customer service skills., • Competitive salary commensurate with experience and qualifications., • Opportunities for career growth and professional development., • Access to advanced tools, equipment, and technologies to perform your duties efficiently., • Supportive and collaborative work environment., • Employee benefits package, including health insurance and pension plan. If you are ready to take on new challenges and make a significant impact in the plumbing and heating industry, we would love to hear from you. To apply for the position of Plumber/Gas Engineer at Sterling Plumbers, please submit your up-to-date CV and a cover letter outlining your relevant experience and qualifications. Feel free to include any notable achievements or projects you have been involved in.

Fire and Security Engineer £38,000 - £45,000, Burgess Hill & London, Monday to Friday, Full-time, Permanent, 20 days holiday + 8 bank holidays + birthday off, Company vehicle, phone, PPE, and training provided The Role We are recruiting for an experienced Fire and Security Engineer to join a well-established and respected fire and security integration company. With NSI Gold and BAFE accreditations, the business operates at the forefront of the industry and is known for its commitment to safety, innovation, and service excellence. This position will sit within the thriving service department, covering London and the surrounding areas, reporting to the Service Manager. Key responsibilities will include: Servicing and maintenance of Fire Alarms, Intruder Alarms, CCTV, Access Control systems, and fire extinguishers Attending client sites for reactive callouts and planned maintenance Providing excellent customer service and communication on-site Escalating technical issues to management as appropriate Completing all service reports and administration accurately and promptly Ensuring all work is carried out in compliance with Health & Safety and company policies Participating in team meetings and ongoing training sessions Supporting junior engineers or apprentices where required Requirements The successful candidate will have a minimum of 3 years' experience servicing Fire Alarms, CCTV, Access Control, and Intruder Alarm systems. A Level 3 FIA or equivalent qualification is essential. CSCS/ECS and IPAF certification, along with Gent Fire experience, are highly desirable. The role demands strong problem-solving skills, a professional approach to customer service, and a collaborative mindset. A full UK driving licence is essential. This role could suit someone who has worked as a Fire Alarm Engineer, Security Systems Engineer, or Fire & Security Technician. Company Information You will be joining a growing and forward-thinking business that designs, installs, and maintains premium fire and security solutions. With a strong client base and a commitment to investing in both its people and technology, the company values high standards, reliability, and innovation. Employees benefit from a supportive and team-oriented environment where development and progression are encouraged. Package £38,000 - £45,000 per annum Company vehicle and phone Full PPE and uniform provided 20 days holiday + 8 bank holidays + birthday off Company pension Company events Training and development opportunities Full-time, permanent position INDSK Travail Employment Group is operating as an Employment Agency. Once you click to apply for this job your application will be immediately received by Travail Employment Group. If your application is successful a consultant will be in contact with you within the next 7 days. If you do not hear within 7 days you have unfortunately not been successful on this occasion

Location:-Hasssock Job Title:- Vehicle Technician (Level 2) Salary Up to £34,000 depending on experience + bonus We are recruiting for a Level 2 Light Vehicle Qualified Technician in the Hassocks Area, to join a brilliant Volume Dealership Group. The position is for either an experienced technician looking to wind-back the heavy work, or a sales prep technician to carry out PDI's, services and repairs. This is a top Franchise that train and progress all their Technicians to the top level, and historically they have pushed them all the way up to Master Level/Group Technical level (which you can either take it or leave it). If you are a little bit bored and uninspired, this is your chance. Here are some but not all the benefits:- From £29,000 to £34,000 basic + bonuses 8-5:30pm - Mon - Fri with 1/2 weekends only 8:30-12:30pm Full training and Accreditation with the franchise Requirements for Vehicle Technician role 1. A Motor Trade qualification to work on any type of vehicle 2. Driving License 3. Tools to tackle repairs 4. 18 months experience, but open to a conversation around it (Level 2 Light Vehicle is the minimum they can take anyone on) Ready for an upgrade? If you are interested in this position please contact Eric Duxbury at Holt Recruitment. He can tell you everything you need to know about your next move by hitting 'Apply' below. Please note:- if your CV is out of date, don't worry. Apply anyway, we can update it for you. Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments

Fire & Security Systems Designer £40,000 - £50,000 depending on experience, Burgess Hill or London, Full-time, Permanent, 20 days holiday + Bank Holidays (rising with service to 25 days) + Birthday off, Profit Share Scheme, Pension scheme The Role We are working with a well-established fire systems business operating across high-end commercial and residential projects to recruit a Fire & Security Systems Designer. This is a full-time, permanent role based at either their Burgess Hill Head Office or London Satellite Office, with travel to sites across the UK. The successful candidate will join a collaborative technical team and play a key role in delivering compliant and coordinated life safety system designs. Key responsibilities include: Designing fire alarm, security, voice alarm, and related life safety systems to British Standards (BS 5839, BS 8629, BS 6266, etc.) Producing design documentation, device layout drawings, cable schedules and BOQs Liaising with clients, consultants, and site teams to ensure design compliance Conducting site surveys and attending design/progress meetings Supporting tender and project delivery teams with technical input Ensuring designs meet regulatory and client specifications Using AutoCAD and other design tools to produce accurate layouts Providing technical advice and design validation Coordinating with internal departments to ensure smooth project delivery Maintaining up-to-date knowledge of industry standards and innovations Requirements Previous experience in fire alarm and/or security system design (Level 3) is highly desirable, along with a good working knowledge of relevant British Standards and industry regulations. Proficiency in AutoCAD (2D) and design software tools is desirable. FIA or equivalent technical qualifications are highly desirable. A full UK driving licence and willingness to travel are essential. This role could suit someone who has worked as a Fire Systems Designer, Security Systems Designer, M&E Designer or Life Safety Systems Engineer. Company Information This employee-owned business is known for its collaborative culture and strong technical expertise. Operating across high-end commercial and residential projects, they offer career progression, a supportive team environment, and a unique profit-share structure that rewards contribution and commitment. Package £40,000 - £50,000 depending on experience 20 days holiday + Bank Holidays (rising with service to 25 days) Birthday off Pension scheme Profit-share structure Career progression opportunities Supportive and collaborative work environment Travel across UK sites Office base in Burgess Hill or London Travail Employment Group is operating as an Employment Agency. Once you click to apply for this job your application will be immediately received by Travail Employment Group. If your application is successful a consultant will be in contact with you within the next 7 days. If you do not hear within 7 days you have unfortunately not been successful on this occasion

Job Title: Automatic Gate & Barrier Call-Out / Service Engineer Salary: £42,000 – £45,000 per year Job Type: Full-time, Permanent Location: Field-based (South East – Sussex, Surrey, Kent) About the Role An established and growing access solutions provider is seeking an experienced Automatic Gate & Barrier Service Engineer. The business delivers installation, maintenance, and repair services for residential, educational, and commercial clients, with a strong focus on customer service and long-term client relationships. Key Responsibilities • Carry out maintenance on automatic gates, barriers, and access control systems, • Diagnose faults and perform repairs on automated systems, • Service and maintain gate and barrier equipment, • Attend call-outs and complete reactive repairs, • Conduct force testing and risk assessments, • Complete safety reports and documentation, • Perform on-site troubleshooting and problem-solving Requirements • Minimum 2–3 years’ experience servicing gates and barriers, • Experience with gate automation systems such as: BFT, BPT, CAME, DEA, FAAC, FADINI, GIBIDI, NICE, AES, VIDEX, TELGUARD, • Welding experience (desirable but not essential), • DHF or Gate Safe qualification (desirable but not essential), • Strong mechanical, electrical, and fault-finding skills Candidate Profile • Proficient in servicing, maintaining, and repairing automated gate systems, • Able to read and follow technical manuals and program control boards, • Strong troubleshooting and diagnostic skills, • Good communication and customer service abilities, • Able to work independently and manage workload effectively Benefits • Company pension, • Free parking, • On-site parking Additional Requirements • Must live in or be willing to commute within Sussex or Surrey, • Full UK work authorisation required, • Fluent in English, • Field-based role (on the road)

Location:- Burgess Hill Job Title:- Mechanic Salary:- Up to £42,000 We are recruiting for a Family-run Garage in the Burgess Hill Area for a Mechanic, that are willing to look at either Level 2 or Level 3 Qualification. This is a top family-run and owned site, that train and progress all their Technicians to the top level with an MOT license too. If you are stuck in your current role and struggling to hit unrealistic targets, this is your chance. Mon - Fri only 8-6pm working across all makes and all models All levels of work from Service > heavy mechanical work Training towards MOT License and D1 Mini-bus license if wanted Family-run Garage - no airs or graces Requirements for Vehicle Technician role 1. A Motor Trade qualification to work on any type of vehicle 2. Driving License 3. Tools to tackle repairs 4. 18 months experience, but open to a conversation around it. Ready for an upgrade? If you are interested in this position please contact Eric Duxbury at Holt Recruitment. He can tell you everything you need to know about your next move by hitting 'Apply' below. Please note:- if your CV is out of date, don't worry. Apply anyway, we can update it for you. Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positons and Confidential Appointments

2nd Line Support Engineer £25,000 - £32,000 + discretionary bonus, Burgess Hill, Monday to Friday 9am-5:30pm, Permanent, 28 days holiday including bank holidays, Bonus scheme, own transport required The Role A fantastic opportunity for a 2nd Line Support Engineer to join a specialist technology organisation providing advanced support across cloud, security, and on‑premise environments. This role sits within a dedicated technical team and reports directly into senior technical management. The successful candidate will handle escalated issues, contribute to compliance processes, and support automation‑focused improvements across the business. Resolve escalated technical issues across server, cloud, and network environments Use scripting tools to automate tasks and improve internal workflows Assist in maintaining internal security and compliance frameworks Support the implementation and ongoing management of industry standards Manage and optimise remote monitoring and management tools Troubleshoot and support telephony and connectivity issues Contribute to infrastructure projects and improvements Maintain accurate documentation and audit records Review technical trends and contribute to service improvements Support the wider technical team with complex troubleshooting Requirements The ideal candidate will bring solid 2nd Line experience with exposure to cloud environments, networking, automation, and security practices. Experience with Microsoft cloud tools, networking fundamentals, compliance frameworks, and scripting would be highly desirable. This role could suit someone who has worked as an IT Support Technician, Technical Support Engineer, or Infrastructure Support Analyst. Company Information You will be joining a forward‑thinking, security‑minded organisation operating within the technology sector. The company places strong emphasis on innovation, compliance, and continuous improvement, offering a supportive environment where technical growth and professional development are encouraged. Package £25,000 - £32,000 Discretionary bonus scheme 28 days holiday including bank holidays Pension scheme Ongoing training and certification support Modern technical environment with focus on automation Permanent contract Own transport required Travail Employment Group is operating as an Employment Agency. Once you click to apply for this job your application will be immediately received by Travail Employment Group. If your application is successful a consultant will be in contact with you within the next 7 days. If you do not hear within 7 days you have unfortunately not been successful on this occasion

Overview We are looking for an experienced Senior Embedded Software Engineer to design, develop, and enhance embedded software for advanced electro‑mechanical products used in global industrial applications. This role is hands-on and technical, contributing to firmware development across the full product lifecycle while collaborating closely with hardware, electronics, and systems teams. This is an ideal position for an engineer who enjoys solving real‑time, hardware‑integrated problems and delivering high-quality embedded code in a structured engineering environment. Key Responsibilities Embedded Software Development Design and develop embedded firmware in C/C++ for ARM-based microcontrollers (e.g., STM32). Work with real‑time environments - RTOS or bare-metal. Implement drivers, peripherals, communication buses, sensor interfaces, motor control, timers, and control loops. Write reliable, maintainable, well‑structured embedded code. Hardware Interaction Collaborate with electrical and systems engineering teams to define requirements and interface specifications. Use oscilloscopes, logic analysers, debuggers (e.g., JTAG/SWD) to diagnose and resolve issues. Support integration, bring-up, and testing of new hardware and prototypes. Software Quality & Processes Contribute to code reviews, unit testing, and documentation. Use version control systems (Git) and structured SDLC processes. Follow embedded software best practices (MISRA or similar desirable). Team Collaboration Mentor less experienced engineers where appropriate. Work closely with cross-functional teams to deliver features, diagnose field issues, and improve existing firmware. Participate in technical discussions and contribute to continuous improvement of tools and processes. Skills & Experience Required Essential Strong professional experience developing embedded systems in C/C++. Experience with ARM Cortex‑M microcontrollers (e.g., STM32). Good understanding of embedded hardware: peripherals, ADCs, interrupts, timers, PWM, bootloaders. Experience in real-time systems (RTOS or bare-metal). Strong debugging skills using both software tools and physical lab equipment. Communication protocols: SPI, I²C, UART, CAN (at least two). Experience in full lifecycle firmware development within a structured engineering environment. Desirable Experience with industrial products, robotics, machinery, pumps, sensors, or motor control. Control algorithms or DSP understanding. Experience with Python or scripting for tooling/test automation. Familiarity with safety, reliability, or IEC/ISO engineering standards. Experience with continuous integration and automated test frameworks for embedded systems. To find out more about Computer Futures please visit Computer Futures, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC(phone number removed) England and Wales

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

Job title: Coffee Field Service Engineer. This is a roasting hot opportunity to join one of the leading names within the coffee industry as we are seeking a Coffee Field Service Engineer to join the London FSE team and visit sites in London. A highly motivated, well-presented individual with technic

As a Lift Engineer you will be responsible for:. Applying your knowledge as a Lift Engineer in fault finding situations. A background in lift engineering, in either service, repair or installation.

Are you from a technical painting, surface coating, or similar background and ready to take the next step in your career by joining a well-established manufacturer offering full training to develop you into a highly skilled Process Engineer, where you can apply your industry expertise, grow into sen

This is an excellent opportunity for an engineer who wants to develop alongside a senior engineer, work on quality installations, and progress within a stable employer. Engineers confident supporting a senior engineer with installation works.

Technical Support Engineer - Integrations. Technical Support Engineer - Integrations. This is a hands-on role supporting complex, highly technical systems and integrations, where you'll act as an escalation point for challenging issues that require deep technical expertise.

Are you a Service Engineer from an Electrical/ Electromechanical background looking to join a rapidly growing company offering specialist training and progression opportunities?Excellent opportunity to develop your technical skills further with an industry leader, who will invest within your career

As a CT Meter Engineer, you will be responsible for the installation, maintenance, and commissioning of CT metering equipment across the Yorkshire area. Commercial Meter Engineer Yorkshire £40,000 (DOE) + £5000 Annual Bonus (Paid Monthly) + Up to 8% Pension Contribution + 25 Days Holid

Are you a Commercial Catering Engineer with COMCATS 123+5 looking to join an industry leading, national organisation who will invest in your development through further training and progression, as well as the opportunity to increase your yearly earning through overtime and excellent benefits?This m

Technical Lead Engineer (Mechanical). The JDO is also responsible for the treatment of Nuclear Safety Category 3 and 4 site queries as part of the Intelligent Customer role under a Technical Delegation of Authority given from the Project Design Authority.

Are you an ambitious HVAC engineer looking to join a growing engineering services company with an excellent reputation as an employee first business, who will actively training you into HVAC commissioning and invest in your ongoing career and skills development, as well as providing an interesting a

Connect Appointments have an exciting opportunity for an experienced Technical Sales Engineer to join our client's team based in Eaglescliffe, Teesside! We are currently looking for a Technical Sales Engineer to drive our client's anticorrosion equipment sales, as they work with a variety o

Are you a Quality Engineer looking to join an internationally-renowned Manufacturer in a highly varied role where you will receive continued training across Quality, Continuous Improvement and Systems Management? On offer is an exciting opportunity to develop your skillset as a Technical expert, rec

A leading company within the coffee solutions sector has a newly created opportunity for a Coffee Field Service Engineer to join the team. They are ideally looking for an engineer based in the East London or Essex region, offering up to £38k basic, depending on experience. Responsibilities of the C

Refrigeration Engineer (F-Gas/ Catering). Are you a Refrigeration Engineer with a background in commercial or catering systems looking to join an industry leading, national organisation who will invest in your development through further training and progression, as well as the opportunity to increa

Field Service Engineer / Field Maintenance Engineer £35,000 - £45,000 + Door to Door + Full Specialist Training + Structured Progression + Company Van & Fuel Card + Healthcare + Life Insurance Field Based covering the South-West, commutable from Exeter, Crediton, Cullompton, Tiverton,

Audio Visual EngineerWest Sussex (Can be located: Horsham, East Grinstead, Haywards Heath, Epsom, Guildford, Tunbridge Wells, Kent, Crawley East Sussex, South London)£35,000 + Training + Progression + Overtime + Van / Fuel Card + Benefits. Do you have Audio Visual / Electrical experience looking f

The ideal person will come from a similar IT technical specialist or field based vertical, ideally with some commercial troubleshooting of 1.

Heavy Plant Engineer (Technical Training) £32,000 - £48,000 / £15 - £23PH (OTE - £50,000+) + Expert Technical Training + Progression + Incentive Bonus + Unlimited Paid Overtime + Van + Fuel Card + Employee Assistance Programme + Health Cash Plan + 31 Holiday Days + Fle

Heavy Plant Engineer (Technical Training) £32,000 - £48,000 / £15 - £23PH (OTE - £50,000+) + Expert Technical Training + Progression + Incentive Bonus + Unlimited Paid Overtime + Van + Fuel Card + Employee Assistance Programme + Health Cash Plan + 31 Holiday Days + Flexible Additional Holiday +

Water Treatment Engineer / Plumber £30,000 - £37,000 + Full Industry Training (Internal & External) + Qualification Opportunities + Overtime + Van and Fuel Card + Company Benefits + Flexible Hours Field based position covering areas within Gloucestershire & Somerset Are you a Water T

If you are an experienced trainee level Vending Engineer who has a passion in the industry and is ready for that next challenge then you will be joining a supportive and growing team, who will invest in your future. This is a newly created role, and you will be covering the M25 corridor alongside an

CHP Service Engineer Covering South-west £40,000 - £45,000 + Overtime paid at 1. The Role * Covering the South-west and Midlands * Servicing of Commercial CHP systems * 1 in 3 Call Out rota The Person * Experience with CHP or Diesel Engines * CSCS card holder * Mechanical bia

Astute's EPC Contract Power team is partnering with a leading EPC Contractor to recruit a Lead Mechanical Commissioning Engineer to join their fast paced team on a 7 months initial contract basis for their Waste to Energy facility based in Chester, Cheshire. The Lead Mechanical Engineer comes with a

Are you an Aspiring BMS Engineer from a Building Services, HVAC, Electrical or similar background looking to join a rapidly growing highly specialized BMS expert, where you will be heavily invested in through accredited industry recognised training alongside furthering your career?This is a once in

Key responsibilities Setting out and levelling in line with drawings Coordinating subcontractors and resolving technical issues Ensuring quality control and compliance with specifications Supporting delivery of the construction programmeRequirements 3+ years' experience as a Site Engineer Expe

Monday - Friday What you need to know about the role As a Technical Electrical Services Lead Engineer, you’ll lead a small group of electrical project engineers supporting manufacturing operations & projects, setting electrical standards and improving electrical compliance. Technical Electri

Controls and Instrumentation Engineer for a Gas Storage Facility based in Alton. As an C&I Engineer, you will be responsible for:. Design, implement, and commission control and safety system upgrades as part of engineering and capital projects.

The Engineer will be responsible for the preparation, build and installation of engineering systems in line with the current drawings, specifications, and guidelines Day to day duties and responsibilities of the Marine Engineer: Mechanical fitter of all general Marine systems including, but