Technical engineer jobs in LutonCreate job alerts

Fuel your future with AO – and unlock serious earning potential. \n We’re all about making work, work for you. With a shift pattern designed for real life, you’ll have the flexibility you need to keep everything in balance. \n As one of our Gas Engineers, you’ll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. \n And the best bit? The rewards. You can earn: \n\n • Up to £2,000 in performance bonuses\n, • A £2,000 welcome bonus just for joining the team\n, • Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year\n\n It’s everything you need to power your career forward, with a team that’s got your back every step of the way. \n Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: \n As an AO Gas Engineer, you’ll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You’ll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time \n A Few Things About You: \n You’ll need to have: \n\n • A full UK driving licence with no more than 6 points\n, • CCN1 & CKR1 qualifications\n, • To be over 21 for insurance purposes\n, • At least 1 years’ experience in gas installations\n\n It’d be great if you also have: \n\n • Some experience installing electrical appliances (but don’t worry — we’ll give you all the training you need to get up to speed)\n\n Our Benefits: \n What’s in it for you \n At AO, we’ve designed our benefits to make life easier, inside and outside of work: \n\n • A 4 on, 4 off shift pattern with 24 days holiday — you’ll work less than half the year.\n, • A company van with fuel paid for, so you’re ready to go from day one.\n, • On-call support from our expert technical team whenever you need it.\n, • Access to fantastic training facilities with ongoing development opportunities.\n, • A competitive pension scheme.\n\n Plus, a great range of everyday perks: \n\n • Simply Health cash plan to help cover healthcare costs\n, • Help at Hand — access to a 24/7 GP and wellbeing support\n, • The option to buy extra holidays for even more flexibility\n, • A cycle to work scheme to support a healthier commute\n, • Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday\n, • Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder\n\n And that’s not all — there’s plenty more to discover when you join the team \n Click ‘Apply’ now to join our family and find out more about the Gas Installations Engineer role.

Fire & Security Engineer Salary: £21£24 per hour, equivalent to £42,680£49,920 per annumLocation: Milton Keynes / M1 Corridor covering Northampton, Luton, Hertfordshire, Bedford and surrounding areasType of work and hours: Permanent, full-time, field-based role, Monday to Friday. Travel paid after the first 30 minutes each way. Overtime available at enhanced rates.Are you an experienced Fire & Security Engineer looking for a varied field-based role covering commercial, education and infrastructure sites across the M1 corridor?Our client is looking to recruit a skilled Fire & Security Engineer to join their established engineering team, supporting service, maintenance, fault-finding, repairs, small works and installation activity across a range of fire and security systems. This is a permanent opportunity offering strong earning potential, overtime, paid travel, a company van, healthcare and ongoing technical development.The priority for this role is strong security systems experience, particularly IP CCTV, intruder alarms and door entry/access control systems. Applicants will also need practical experience working with fire alarm systems, with the ability to fault-find, maintain and carry out repairs to a good technical standard. The role would suit an engineer who is confident working independently, comfortable liaising with customers on site and able to manage a varied workload across multiple locations.Job Description Duties will include:Carrying out service, maintenance, fault-finding, repairs and small works across fire and security systemsWorking on CCTV systems, including IP and analogue systems, as well as intruder alarms, access control and door entry systemsMaintaining and repairing fire alarm systems across commercial, education and other client sitesDiagnosing faults across panels, circuits, devices and associated components, ensuring issues are resolved efficiently and safelyLiaising with clients and site contacts when arranging, attending and completing worksCompleting risk assessments, method statements and job reports accuratelyUndertaking minor associated installation or making-good tasks where requiredMaintaining company vehicle stock, tools, equipment and records in line with company proceduresParticipating in an out-of-hours call-out rota, currently around 1 week in 12Person Specification Applicants should be able to demonstrate:Experience as a Fire & Security Engineer, Security Engineer or similar field-based systems roleStrong working knowledge of IP CCTV, intruder alarm and door entry/access control systemsPractical experience maintaining, fault-finding and repairing fire alarm systemsExperience with systems such as Galaxy, Texecom, Hikvision, Dahua, Paxton, PAC, Videx, Gent, Advanced, Notifier, Morley, C-tec or similar would be advantageousGood understanding of health and safety requirements, site working practices and risk managementAbility to work independently, prioritise workload and solve technical issues on siteStrong customer-facing communication skills and a professional approach to service deliveryFull UK driving licenceExperience with gates, barriers, disabled refuge systems or nurse call systems would be beneficial, although training can be provided where required.Salary and Benefits The role offers a salary of £21£24 per hour , equivalent to approximately £42,680£49,920 per annum , with travel paid after the first 30 minutes each way. Overtime is available at enhanced rates, with evenings paid at 1.5x and late shifts/weekends paid at 2x .Benefits include company van and fuel, laptop, mobile, tools, pension, healthcare, 25 days holiday plus statutory bank holidays, overtime opportunities and paid call-out rota allowance.This is an excellent opportunity for a capable Fire & Security Engineer to join a busy, growing engineering business offering variety, strong earning potential and the chance to continue developing across a wide range of fire and security technologies.To apply, please submit your CV by clicking on the relevant links. If successful, you will be contacted by one of our consultants within 3 working days. Unfortunately, due to the volume of applications we expect to receive for this vacancy, if you do not hear from us within this time, you should presume your application has been unsuccessful on this occasion.Grassroots Recruitment is acting as a recruitment agency and a recruitment business in respect of this vacancy. Grassroots Recruitment is an equal opportunities employer and recruiter. We welcome applications from all sections of the community, regardless of age, race, sex, sexual orientation, marital status, religion or disability.TPBN1_UKTJ

Workshop Foreman – Heavy PlantHarpenden£40,000-£50,000 + OvertimeThe RoleWe're working with a well-established and highly respected plant hire business with a strong UK presence. They've built a strong reputation for investing in their fleet and engineers, and due to continued growth, they're looking to bring an experienced Workshop Foreman to lead the day-to-day running of its busy Harpenden workshop.This is a hands-on leadership role where you'll be responsible for maintaining a modern fleet of construction plant, ensuring high standards of workmanship, supporting engineers and helping the depot operate efficiently.You'll split your time between carrying out repairs yourself and supervising the workshop team, ensuring machines are prepared, serviced and repaired to the highest standard while maintaining a safe and productive working environment.Key ResponsibilitiesLead and supervise the workshop engineering team.Carry out servicing, maintenance, diagnostics and repairs on a wide range of heavy plant equipment.Allocate workloads and ensure jobs are completed safely, efficiently and to a high standard.Support engineers with technical fault finding and complex repairs.Ensure all PDI inspections, LOLER requirements (where applicable) and machine preparation are completed.Liaise with the Depot Manager regarding workshop priorities, machine availability and customer requirements.Maintain accurate service records and job documentation.Ensure the workshop is kept clean, organised and compliant with all Health & Safety procedures.Identify training and development needs within the engineering team.Assist with parts requirements and workshop stock management when required.The Ideal CandidatePrevious experience as a Workshop Foreman, Chargehand, Lead Engineer or Senior Heavy Plant Engineer.Strong background servicing and repairing heavy construction plant.Excellent diagnostic and fault-finding ability across hydraulic, electrical and mechanical systems.Experience leading or mentoring engineers in a workshop environment.Good organisational and communication skills.NVQ Level 3 (or equivalent) in Plant Maintenance, Heavy Vehicle or Agricultural Engineering is desirable.Full UK Driving Licence.Typical EquipmentExperience on manufacturers such as:JCBCaterpillar (CAT)KomatsuHitachiVolvo CEDoosan / DevelonTakeuchiKubotaMecalacThwaitesBomagHammAmmannWacker NeusonSANYHyundaiExcavatorsDumpersRollersTelehandlersLoading ShovelsCompaction EquipmentWhat's on OfferCompetitive salary.Overtime opportunities.Company pension.Ongoing manufacturer and technical training.Long-term career progression with one of the UK's leading plant hire businesses.Stable, well-established employer with a strong reputation within the construction plant industry.If you're a Foreman in or around Harpenden looking for a solid opportunity with good earning potential — get in touch.Call NEOS Engineering RecruitmentApply now and we'll be in touchTPBN1_UKTJ

Job Description:Salary RangesEngineer: 38k - 53kSenior: 45k - 61kPrincipal: 54k - 71kLead: 60k - 84kLeonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity.Where this vacancy is being recruited across more than one grade, the successful candidate will be appointed to a specific assessed grade, and the applicable salary range will be that associated with the grade of appointment.Leonardo offers an additional allowances for some roles – for more information please contact ukcareers@leonardo.comYour impactWould you like to deliver the complex Firmware that forms part of our self-protection systems installed on fast jet, UAV, land and naval platforms? Do you have experience leading Firmware teams or delivering highly complex embedded solutionsLeonardo is looking for Lead and Principal FPGA/Firmware Engineers to join our growing Luton or Bristol based teams.As an experienced FPGA/Firmware engineer you will work with experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements.Your role may even take you across the UK or abroad for technical reviews. You will use or develop team leading experience to support the delivery of work from several engineers. Your expertise will also be key to enhance processes and ways of working across UK wide FPGA/Firmware delivery teamsWhat you will do:Firmware requirements capture and management;FPGA design and analysis;Production of documentation for other engineers and evidence for design reviews;Development of FPGA test and FPGA integration plans;Perform system integration work with PCB designersSupport all firmware designs through the company firmware process – training will be givenModification of existing firmware designs and test benchesWhat you’ll bringAn HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work.Design tools such as Xilinx, TCL, Verilog, System Verilog and UVMFPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel).Fast interfaces such as PCIe, Ethernet, and JESD is also required.Auto-generated code using model driven engineering using Matlab and Simulink toolsDerivation of detailed FPGA/Firmware requirements and architecture from system requirementsA structured approach to FPGA/firmware design (RTCA DO-254 or similar)Cryptography and anti-tamper techniquesArtificial Intelligence including machine learning and genetic algorithmsElectronics test methods and equipmentGood verbal and written communication skillsSecurity ClearanceThis role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: Why join usAt Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive.Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year.Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution.Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity).Rewarding Performance: All employees at management level and below are eligible for our bonus scheme.Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning.Refer a friend: Receive a financial reward through our referral programme.Tailored Perks: Spend up to 500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more.Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role.For a full list of our company benefits please visit our website.Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety.At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know.Be part of something bigger - apply now!Primary Location: GB - Luton - Cap. Green 300Additional Locations:GB - Bristol - Coldharbour LaneContract Type:PermanentHybrid Working:HybridJob SummaryJob number: R0024187Date posted : 2026-06-03Profession: EngineeringEmployment type: Full time

At Ball, integrity and trust are the foundation of who we are. Guided by our core values—"We Care. We Work. We Win.”—we create a culture where every voice matters and every idea drives progress. Further your career at Ball, a world leader in manufacturing sustainable aluminium packaging. Achieve extraordinary things when you join our team, and make a difference in your professional development, the community, and around the globe! Create a new future. Apply Today. Position overviewAs a Back End Engineer, you will support manufacturing sites across EMEA and globally, driving process improvements, installations, and best practice implementation. You will play a key role in maintaining and optimising back-end production equipment while supporting innovation, cost reduction, and operational excellence.Key responsibilities include:Provide engineering support for projects and process improvementsSupport installations, audits, and efficiency initiativesDrive maintenance standards and best practicesDeliver technical support and training to plant teamsIdentify root causes and implement effective solutionsManage small-scale plant projectsCollaborate with plants, suppliers, and engineering teamsProduce clear and timely site visit reportsWhat we are looking for:Mechanical Engineering qualification (or equivalent)knowledge of concorde machineStrong knowledge of back-end manufacturing processesProven problem-solving and process improvement skillsExcellent communication and interpersonal skillsAbility to work independently and manage prioritiesStrong MS Office skillsFluent English (additional languages are a plus)Self-motivated team playerBall Corporation is an Equal Opportunity Employer. We actively encourage applications from everybody, regardless of gender, age, ethnicity, faith, ability, or orientation. When you join Ball you belong to a team of over 16,000 members worldwide. Our products range from infinitely recyclable aluminium cans, cups to aerosol bottles that enable our customers to contribute to a better world.Each of us has a deep commitment to diversity and inclusion which is the foundation of our culture of belonging. Everyone at Ball is making a difference by doing what we love. Because what we create may change, but what we will always make is a difference.Please note the advertised job title might vary from the job title on the contract due to local job title structure and global HR systems.No agencies please.

Job Description:Your ImpactAre you looking to advance your career and work on technology that will shape the future of defence? Does working on developing systems for current and future military aircraft sound like a challenge that would be of interest? If you have skills in systems engineering and five years UK residency, we are looking for engineers to join us at Leonardo in Luton in a predominantly office and laboratory-based role.What you’ll do as a Systems EngineerDevelopment of Requirements and Test PlansControl of Parts and Documentation, including change managementCollaboration with multi-functional teams on system and sub-system developmentWork with suppliers, integrators, and users across the UKOur Systems Engineers work in multidisciplinary teams spanning a range of activities pulling together the necessary engineering and technology strands into a high-performance system, bridging the gap between the theoretically possible and the practically implementable.Examples of WorkEarly concept studies investigating the application of new technology on future platformsEngaging with stakeholders, defining requirements for a new systemConducting cost and functional performance trade-offs and evaluation of proposed solutionsEnhancing capabilities and performance of in-service systemsDesigning and integrating new functionality into an existing systemModelling a system to understand observed simulated performanceDevelopment of capability within limitations and constraints of the target hardwareRoot-cause analysis of anomalies observed during integration or evaluation activitiesDesigning and conducting testing and trials to prove equipment function and performanceOpportunities to lead technical activities and initiativesMentoring and coaching other engineersCreating and delivering reports, presentations and proposals to customers and industry partnersSupporting knowledge sharing and exploitation of good practiceWhat you’ll bringA science-based Honours degree or equivalent experienceExperience or a desire to gain electronic warfare domain knowledgeKnowledge of the systems engineering lifecycle, particularly in the following areas:Problem definitionRequirements engineering, including the use of IBM DOORSSystems ArchitectureSynthetic EnvironmentsSystems Modelling and AnalysisIntegrationVerification and ValidationModel Based Systems Engineering (MBSE)It would be desirable if you had experience from some of the following:Experience of working with related specialisms such as safety, security, airworthiness or reliabilityDomain-specialist knowledge such as:Digital signal processingRF systemsMulti-sensor data fusion and trackingReal time data simulation/generationMilitary Electronic systemsData analysis using AI or Machine LearningOperational Experience in Electronic Intelligence or Electronic WarfareSecurity ClearanceThis role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS), along with an additional range of Personnel Security Controls referred to as National Security Vetting (NSV), including meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: . Due to the nature of the work and its connections to UK Defence strategy, applicants must have five years UK Residency and hold a UK Passport.Salary Range: Senior Engineer 45,000 to 58,000Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity.Why join usAt Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive.Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year.Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution.Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity).Rewarding Performance: All employees at management level and below are eligible for our bonus scheme.Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning.Refer a friend: Receive a financial reward through our referral programme.Tailored Perks: Spend up to 500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more.Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role.For a full list of our company benefits please visit our website.Primary Location: GB - Luton - Cap. Green 300Contract Type:PermanentHybrid Working:OnsiteJob SummaryJob number: R0030441Date posted : 2026-06-10Profession: EngineeringEmployment type: Full time

Job Description:Your ImpactAre you looking to advance your career and work on technology that will shape the future of defence? Does working on developing the next generation of fast jet technology sound like a challenge that would be of interest? If you have skills in systems engineering and five years UK residency, we are looking for engineers to join us at Leonardo in Luton in a predominantly office and laboratory-based role.What you’ll do as a Systems EngineerDevelopment of Requirements and Test PlansControl of Parts and Documentation, including change managementCollaboration with multi-functional teams on system and sub-system development for Tempest and the Global Combat Air Programme (GCAP)Work with suppliers, integrators, and users across the UKOur Systems Engineers work in multidisciplinary teams spanning a range of activities pulling together the necessary engineering and technology strands into a high-performance system, bridging the gap between the theoretically possible and the practically implementable.Examples of WorkEngaging with stakeholders, defining requirements for a new systemConducting cost and functional performance trade-offs and evaluation of proposed solutionsModelling a system to understand observed simulated performanceDevelopment of capability within limitations and constraints of the target hardwareDesigning and conducting testing and trials to prove equipment function and performanceOpportunities to lead technical activities and initiativesMentoring and coaching other engineersCreating and delivering reports, and proposals to customers and industry partnersSupporting knowledge sharing and exploitation of good practiceWhat you’ll bringA science-based Honours degree or equivalent experienceExperience or a desire to gain electronic warfare domain knowledgeKnowledge of the systems engineering lifecycle, particularly in the following areas:Problem definitionRequirements engineering, including the use of IBM DOORSSystems ArchitectureSynthetic EnvironmentsSystems Modelling and AnalysisIntegrationVerification and ValidationModel Based Systems Engineering (MBSE)It would be desirable if you had experience from some of the following:Experience of working with related specialisms such as safety, security, airworthiness or reliabilityDomain-specialist knowledge such as:Digital signal processingRF systemsMulti-sensor data fusion and trackingReal time data simulation/generationMilitary Electronic systemsData analysis using AI or Machine LearningOperational Experience in Electronic Intelligence or Electronic WarfareSecurity ClearanceThis role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS), along with an additional range of Personnel Security Controls referred to as National Security Vetting (NSV), including meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: . Due to the nature of the work and its connections to UK Defence strategy, applicants must have five years UK Residency and hold a UK Passport.Salary Range: Principal Engineer 55,000 to 68,000Where this vacancy is being recruited across more than one grade, the successful candidate will be appointed to a specific assessed grade, and the applicable salary range will be that associated with the grade of appointment.Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity.Why join usAt Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive.Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year.Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution.Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity).Rewarding Performance: All employees at management level and below are eligible for our bonus scheme.Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning.Refer a friend: Receive a financial reward through our referral programme.Tailored Perks: Spend up to 500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more.Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role.For a full list of our company benefits please visit our website.Primary Location: GB - Luton - Cap. Green 300Additional Locations:GB - Bristol - Coldharbour LaneContract Type:PermanentHybrid Working:OnsiteJob SummaryJob number: R0030646Date posted : 2026-06-16Profession: EngineeringEmployment type: Full time

Lead Hardware Engineer \n Based in Luton \n 12-month contract \n Paying up to £70p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. \n \n Responsibilities: \n\n • Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications.\n, • Define hardware architectures for FPGA, SoC and processor-based systems.\n, • Capture schematics and support PCB layout activities for high-speed, high-performance digital designs.\n, • Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols.\n, • Integrate FPGA, processor, software and firmware components into complete system solutions.\n, • Perform design analysis, simulation, validation and verification activities.\n, • Support hardware bring-up, debugging and root-cause investigation at board and system level.\n, • Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams.\n, • Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards.\n, • Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles.\n, • Support customer demonstrations, integration activities, acceptance testing and trials.\n\n \n Experience required: \n\n • Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries.\n, • Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent).\n, • Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers.\n, • Experience integrating hardware, firmware and software on complex embedded systems.\n, • Experience developing products to demanding EMC, EMI and environmental requirements.\n, • Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions.\n, • Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards.\n, • Experience with FPGA signal processing architecture\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Sales Engineer (Gearboxes / Motors) \n £45,000 - £55,000 + OTE 60k + Car + Remote + Phone + Laptop + Lunch Allowance + Healthcare + Final Salary Pension + Life Insurance \n Luton \n Are you a Sales Engineer with experience in gearboxes or motors, looking to join a global industry leader offering a highly autonomous, rewarding role, as the go-to technical specialist in your area? \n On offer a great opportunity ... \n \n \n ZIPC1_UKTJ

Product Development Engineer \n\n • Annual Salary: £45k - £50k with up to £8k bonus\n, • Location: Luton, Bedfordshire\n, • Job Type: Full-time, Monday to Friday (Days Only)\n\n We are seeking a highly organised and proactive Product Development Engineer to join our New Product Development department. This role is ideal for someone with a disciplined, structured approach to problem-solving and a positive, can-do attitude. The successful candidate will be instrumental in driving the development of new products from concept through to volume production. The ideal candidate will have engineering qualification in mechanical or electrical engineering. \n Day-to-day of the role: \n\n • Support New Product Development (NPD) from early concept through to volume production.\n, • Experience in switch gears, sockets, manufacturing will be a strong bonus\n, • Collaborate with manufacturing partners to translate product requirements, user needs, and applicable standards into robust and manufacturable mechanical designs.\n, • Plan, coordinate, and support prototype builds and design iterations.\n, • Lead FMEA reviews with relevant operations teams and drive the implementation of resulting action plans.\n, • Work closely with Electrical and Electronics Engineering, Quality, Sourcing, and Supply Chain teams.\n, • Conduct internal product testing and coordinate external testing activities for products in development, investigating and resolving any identified issues.\n, • Define and manage product and packaging labelling and marking requirements, including packaging labels, instruction leaflets, and data sheets.\n, • Collaborate with the Quality Team to investigate product issues, report findings, and manage product improvements with partner factories.\n, • Ensure products comply with relevant BS EN safety standards and directives, including EMC, REACH & RoHS.\n, • Produce and maintain technical documentation, including product specifications, packaging specifications, instruction leaflets, and data sheets.\n, • Maintain accurate and up-to-date technical support records, including WEEE and packaging weight data.\n\n Required Skills & Qualifications: \n\n • Educated in an Engineering discipline with a Mechanical or Electrical Engineering bias.\n, • Ability to identify product features and benefits.\n, • An appreciation of manufacturing processes, product standards, and a quality approach to problem-solving.\n, • Knowledge of electrical product application and electrical installation, including work practices on building sites would be beneficial.\n, • Ideally, knowledge of British/European Standards and legislation that relates to products within the portfolio.\n, • Experience in collaborating with offshore factories remotely.\n, • Ideally, knowledge of IET Wiring Regulations.\n, • Computer literate in Microsoft Word, Excel, and PowerPoint.\n\n Benefits: \n\n • Competitive salary with a bonus potential of up to £8k.\n, • Standard working hours, Monday to Friday with no weekend shifts.\n, • Opportunities for professional growth and development within a thriving industry.\n\n To apply for the Product Development Engineer position, please submit your CV and cover letter detailing your relevant experience and why you are interested in this role.

Lift Service Engineer Luton Salary: Up to £50,000 Are you a Lift Service Engineer looking to take the next step in your career? If the answer is Yes, please read on.... We are a well-known and established Lift Service, Installation and Repair company. Due to our ever-growing lift service portfolio, we are looking for a Lift Service Engineer to cover Luton. Key Responsibilities of the successful Lift Service Engineer: \n\n • Management of your own lift service route in Luton \n, • Attend lift breakdowns and undertake planned servicing and maintenance work.\n, • Providing Service and PPM work at customer sites\n, • Provide technical support and advice to customers and maximise the first-time fix rate\n, • Maintain a professional image at all times as you’re a company ambassador on site\n, • Travelling throughout the coverage area\n\n Key requirements of the successful Lift Service Engineer: \n\n • NVQ Level 3 qualified in Lift Engineering\n, • 2 years of experience in a Lift Service / Maintenance Engineer position\n, • Relevant qualifications for the position, e.g. J Modules\n, • Proficient with fault finding, diagnosis and repair on either/both Passenger and Goods lifts\n, • Self-motivated, reliable, and organised\n, • Full UK driving licence and prepared to travel with the role\n\n If you are interested in this Lift Service Engineer opportunity, please use the application link indoth

Service Engineer (Medical Equipment)£43,000 - £48,000 + Door-to-Door Pay + Overtime + Company Van + Tools + TrainingLuton, M1 CorridorAre you a Field Service Engineer, Service Engineer, Maintenance Engineer, or similar with experience installing, maintaining, or repairing equipment, looking to join an established company offering excellent training, door-to-door pay, overtime, a company van, and tools?On offer is the opportunity to join a specialist business providing equipment and technical support into cleanroom, controlled environment, and specialist facility settings. You will receive structured training, including around 3 months on-site training followed by 3 months field-based learning while buddied up with an experienced engineer. You will be supported in developing your technical skills while working on specialist equipment across customer sites.In this varied role, you will be based from home and travel to customer sites across Luton and the M1 corridor, carrying out installations, planned maintenance, breakdown repairs, fault finding, and general service work. You will work safely on customer sites, use specialist tools, and ensure equipment is operating efficiently, with clean room experience being advantageous.This role would suit a Field Service Engineer with a practical background who is looking for a role with structured training, door-to-door pay, enhanced overtime, a company van, and long-term development.The Role: Installing, maintaining, servicing, and repairing specialist equipment Field-based across Luton and the M1 corridor, with door-to-door pay Structured training, company van, tools, and overtime available at enhanced rate.The Person: Field Service Engineer, Service Engineer, Maintenance Engineer, or similar Ideally clean room experience Experience with installation, maintenance, breakdowns, or service work* Full UK Driving Licence and happy covering M1 corridorReference:BBBH26749AKeywords: Field Service Engineer, Service Engineer, Maintenance Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Equipment Engineer, Service Technician, Maintenance Technician, Clean Room, Cleanroom, Medical Equipment, Specialist Equipment, Fault Finding, Breakdowns, Planned Maintenance, Installations, Field-Based, Home-Based, Door-to-Door Pay, Company Van, Tools, Luton, M1 Corridor, Milton Keynes, Northampton, Bedford, Stevenage, St Albans, Hemel Hempstead, Watford, Dunstable, Leighton Buzzard.If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates.The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Product Development Engineer £45,000 - £50,000 + Training and Development + Annual Bonuses + Company benefits Luton (Commutable from: Dunstable, Milton Keynes, Watford, Stevenage, St Albans)Are you a Mechanical/Product Development Engineer looking to work on a variety of products with real ownership and long-term technical development?On offer is a hands-on role where you'll develop existing technical products, working closely with manufacturing partners and gaining exposure to the full product lifecycle in a growing business.This is an established and expanding organisation with a strong market presence, known for investing in its people and offering ongoing training, support, and the opportunity to broaden your engineering skillset within a collaborative team.In this role, you will support new product development, improve existing designs, coordinate prototyping and testing, and work cross-functionally to deliver high-quality, compliant products. You'll also be involved in problem solving, technical documentation, and driving continuous product improvements.This role would suit a Mechanical or Product Development Engineer looking for a varied, technically engaging position with opportunities to develop and grow long-term.The Role: \n\n • Enhance and develop existing products with real ownership\n, • Improve and refine designs in a handson engineering role\n, • Collaborate across teams and with global manufacturing partners\n\n The Candidate: \n\n • Mechanically biased engineer with product development experience\n, • Strong problem solver with a structured, proactive approach\n, • Confident communicator who can work independently and within a team\n\n Reference Number: BBBH273622To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sagar Sherchan at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Principal Firmware Engineer \n Based in Luton \n 12-month contract \n Paying up to £85p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: As the Principal Firmware Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. \n \n Responsibilities: \n\n • Auto-generating code using model-driven engineering using MATLAB and Simulink tools\n, • Design using tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • Derivation of detailed Firmware requirements and architecture from system requirements\n\n \n Experience required: \n\n • Design tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel).\n, • Fast interfaces such as PCIe, Ethernet, and JESD\n, • A structured approach to firmware design (RTCA DO-254 or similar)\n, • Cryptography and anti-tamper techniques\n, • Artificial Intelligence including machine learning and genetic algorithms\n, • Electronics test methods and equipment\n, • Working in mixed discipline teams\n, • HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work.\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

HV Test EngineerLocation: LutonSalary: £40,000 - £45,000 BenefitsWorking Hours: 37 Hours Monday to Friday with optional Start/Finish timesMonday Thursday (06:00 14:15 or 07:00 15:15 or 08:00 16:30)Friday (06:00 12:00 or 07.00 13.00 or 08:00 14:00)Reports To: Test ManagerWe are seeking an experienced HV Test Engineer to join our growing engineering team. This is a hands-on HV Test Engineer position at the forefront of testing innovation, responsible for performing acceptance testing and reporting on electrical units in line with quality procedures and engineering requirements.Working closely with Electrical, Hydraulic, Quality and Production teams, you will ensure test plans, quality standards and safety requirements are consistently achieved while supporting both current operations and future testing capabilities.The RoleAs a HV Test Engineer, you will be responsible for carrying out acceptance testing of large-scale electrical equipment, monitoring and reporting test results, maintaining test systems and supporting continuous improvement initiatives within a safety-critical environment.Key Responsibilities of the HV Test EngineerTesting & Technical DeliveryPerform acceptance testing on industrial motors up to 13.8kV and 3.2MW.Accurately monitor, record and report test data in line with defined test plans and engineering standards.Complete and log test reports within engineering systems upon test completion.Investigate and support the development of test data acquisition and control systems.Health, Safety & QualityMaintain the highest standards of Health & Safety, ensuring compliance with procedures and safe working practices.Ensure all test equipment is operational, maintained and correctly calibrated.Work strictly to procedures and quality plans to ensure product integrity and compliance.Collaboration & Continuous ImprovementCoordinate with Production teams to support testing schedules for new units, repairs and spares.Participate actively in LEAN and continuous improvement activities, including 5S and structured problem-solving initiatives.Maintain high standards of housekeeping within the test environment.Identify opportunities to improve testing efficiency, quality and safety.What We Are Looking ForEssential RequirementsLevel 4/5 (NQF) qualification in Electrical Engineering or a related discipline.High voltage awareness and practical experience working with high-voltage equipment.Experience with large-scale test setups and power systems.Experience working with data acquisition systems, test procedures and quality plans.Strong understanding of Health & Safety requirements within an engineering environment.Flexible, proactive approach with a positive, can-do attitude.Desirable RequirementsKnowledge of IEC and ISO testing standards, including IEC 60034 and ISO 9906.Experience carrying out dielectric and performance testing.Hydraulics and/or Variable Speed Drive (VSD) experience.Experience with automated test control systems or LabVIEW.Experience working within clean or controlled test environments.Important Health & Safety RequirementDue to the safety-critical nature of this position, any offer of employment will be subject to the successful completion of an occupational health assessment. This assessment will confirm fitness to work safely within a high-risk environment that includes exposure to high-voltage testing and will be conducted in accordance with applicable health and safety legislation and company requirements.EligibilityAll candidates must be able to demonstrate their right to work in the UK.Ready to join a world-class engineering business? Apply today and help drive innovation in high-voltage testing and electrical engineering excellence.INDMANTPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.As Senior Research Engineer (Process Development) you will draw on your diverse engineering background and product lifecycle awareness to progress a variety of research activity in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders.Core operational hours at our Luton site are 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays. The role requires a willingness to undertake occasional national travel for customer meetings. There is also the opportunity to work from home for up to two days per week, subject to business needs.Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied.Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives.Support or lead the design of external work packages to be carried out by third parties to meet project research objectives.Responsible for accurately capturing and recording data and results from test work and development trials.Responsible for raising and issuing high quality and detailed technical documentation.Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s).Contribute to Technology Development Plans and Technology Business Cases within your project(s).Contribute to multi-year planning and internal/external funding proposals as required.Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead.You may support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases.Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager.Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team.Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:A relevant, accredited Engineering or Science based degree OR relevant industry experienceGood general engineering/technology knowledge base and can demonstrate strategic thinking.Experience managing budgets on a work package level or smaller Work Streams.Good working knowledge of general industrial manufacturing processes, and an interest in understanding new and emerging techniques.Good working knowledge of AS9145 APQP/PPAP requirements and tools supporting Zero Defect Manufacturing approaches.Good working knowledge of Lean manufacturing philosophies and Six Sigma / Statistical techniques for process control and problem solving.Logical and methodical approach to work package planning and costing.A strong self-starter, competent to work with general goal-based direction as well as more specific task-based requirements.Experience managing deployed resources (people you lead but you are not their line manager).Experience engaging with production teams and you can identify operational requirements and incorporate in to your project(s) as appropriate and as agreed.Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetingsDesirable:A higher degree qualification such as a Masters, PhD or EngDChartered Engineer with a relevant institutionExperience in Composite Manufacturing ProcessesWe are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually).We offer:What We'll Offer Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions.We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows.The Principal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support.The Principal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions.This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday.Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements.Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation.Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods.Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts.Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements.Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences.Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations.Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction.Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning.You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Degree in Aerospace, Mechanical or similarExperience in Aerospace design / or Aerospace product development.Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements.Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches.Familiarity with digital engineering and model based design preferably using CATIA V5.Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders.Desirable:Expert user of CATIA V5 for complex modelling and drawing creationChartered Engineer status (CEng)Experience working with defence customers and regulatory authorities.Experience in transparencies, composites, or specialist structures/ systems.This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams.You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met.As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually).We offer:What We'll Offer Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyFree onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentJoin us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

Principal / Lead Hardware Engineer Location: Luton, Bedfordshire (LU1)Duration: 12 MonthsOnsite: 90% onsiteRate: £95.44ph UMBRELLASecurity: We seek an engineer with recent high-integrity or safety-critical industry experience (defence, aerospace, or similar), or eligible for UK security clearance.The Opportunity We're looking for an experienced Principal / Lead Hardware Engineer to join a major defence programme developing advanced electronic systems for air, land and maritime platforms.This is a fantastic opportunity to work on complex FPGA and processor-based hardware, contributing throughout the full product lifecycle—from requirements capture and architecture through detailed design, integration, verification and qualification.You'll be working alongside multidisciplinary engineering teams to deliver high-performance electronic hardware for safety and mission-critical applications.Key Responsibilities Design and develop complex digital and mixed-signal electronic hardware.Develop hardware architectures for FPGA, SoC and processor-based solutions.Produce schematics and support PCB layout for high-speed digital designs.Design and validate interfaces such as DDR memory, PCIe, Ethernet and other high-speed protocols.Integrate hardware with embedded software, firmware and FPGA solutions.Carry out simulation, verification, validation and design analysis activities.Support board bring-up, hardware debugging and fault investigation.Work collaboratively with Systems, Software, Firmware, RF, Mechanical and Manufacturing Engineering teams.Support environmental, EMC/EMI and qualification testing.Produce technical documentation throughout the engineering lifecycle.Support system integration, demonstrations and customer acceptance activities where required.Essential Skills & Experience Strong background in high-speed digital hardware design within defence, aerospace or other highly regulated industries.Experience designing FPGA and SoC-based hardware (Xilinx, AMD, Intel/Altera or equivalent).Proven experience designing complex multilayer PCBs, including: High-speed serial interfacesDDR memoryHigh-performance processorsFPGA-based digital signal processingExperience using schematic capture and PCB design tools such as Altium Designer, OrCAD, Xpedition or equivalent.Hands-on board-level debugging using oscilloscopes, logic analysers and protocol analysers.Experience integrating hardware with embedded firmware and software.Strong understanding of signal integrity, power integrity and timing analysis.Experience supporting verification, validation and qualification activities.Ability to translate system requirements into robust hardware designs.Desirable Experience Electronic Warfare, Radar, RF, Communications or Sensor technologies.Development of safety-critical or mission-critical systems.FPGA signal processing.Knowledge of DO-254, DEF STAN, MIL-STD or equivalent industry standards.Hardware design reviews and technical leadership.Design for Manufacture (DfM), Design for Test (DfT) and Design for Reliability (DfR).TPBN1_UKTJ

Technical Support Engineer\n \n \n Location: Luton Salary: £36,000 + Car and other excellent benefits Job Type: Full-Time | Permanent \n Are you a technically minded engineer with excellent customer-facing skills? Do you enjoy demonstrating advanced manufacturing technology, delivering training, and helping customers get the very best from their equipment? If so, we have an exciting opportunity to join a marke... \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Infrastructure Linux Engineer with SC ClearanceThe Bank has a requirement for an experienced Linux Admins/Engineers to join Digital Platforms which is involved in the standards, development and maintenance of a number of systems across the organisation. The resource would work on a mixture of BAU / Continuous Improvement works.The Linux Engineer will be involved in the following activities, amongst others: Provisioning of Red Hat Enterprise Linux (RHEL 8 to 10) systems in both physical and virtual environmentsIn-Situ upgrading of RHEL servers using LEAPP upgrade toolDevelopment of scripts for automated configuration management, monitoring, batch and deployment activitiesProvide recommendations for improvements to current delivery and operational processes and proceduresAdvise project managers on Linux-related technical and delivery mattersEssential Skills/Competencies Previous experience in a technical position within Linux platform support and/or deliveryFamiliarity with request, problem and project management processes and toolsDetail oriented, process driven, highly innovative mindset, with deeply engrained sense of ownership for the projects deliveredProven track record of working well under pressure and thinking clearly in challenging situations in a logical mannerProven track record of being flexible in approach and inventive in order to deliver the right outcomesStrong customer focus and an excellent ability to manage customer relationships and understand requirements and expectationsAdept at stakeholder communications, from senior level to domain-wide engagement eventsA broad and deep understanding of best practice in applying appropriate processes, technologies, and resources to deliver a high quality solutionsExperienced in managing risk, compliance, audit and security obligations, including implementation of disaster recovery and business continuity proceduresTechnical Skills & RequirementsEssential Experience of managing Red Hat Enterprise Linux production systems (RHEL 7 through to 10)Experience of using scripting to automate tasksPlanning and prioritising of project delivery activitiesGood interpersonal and communication skillsStrong analytical and troubleshooting skillsExperience with virtualisation technologies (Linux under VMWare)Experience of working within the ITIL frameworkExperience of managing systems with RHN satelliteDesirable Recent experience with JBossLinux performance tuning skillsExperience with Linux failover clusteringExperience of Kerberos in regards to securing Linux applications and AD integration.Experience of Cisco UCS hardware.Experience in managing third party engineersExperience in resource and workload managementService-orientated customer facing skillsDisaster Recovery and Business Continuity planning and executionProven skills in aligning IT with organisational driversIndustry awareness to identify improvement opportunities and implement them acrossthe services and processes incorporated within the domainGeneral knowledge of all areas of IT application and infrastructureDetailed understanding of processes and systems within the domain of expertiseKnowledge of Puppet or similar configuration management toolsKnowledge of big data platforms, e.g. Horton Works, Hadoop etc.TPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly.The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing.This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required.This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs.We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation.Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need.Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied.You may have budget accountability for a Work Stream or Work PackageSupport or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives.Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives.Responsible for accurately capturing and recording data and results from test work and development trials.Responsible for raising and issuing high quality and detailed technical documentation.Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s)Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s)Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s)Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead.Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development.Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases.Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line managerEnsure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team.Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership.Profile description:What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:HNC, degree or equivalent experience in electrical or systems engineeringExperience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environmentElectronics pcb design experienceGood general engineering/technology knowledge base and can demonstrate strategic thinking.Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis.Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods.Strong self-starter, able to execute tasks according to plan.Logical and methodical approach to task planning.Experience managing deployed resources (people you lead but you are not their line manager).Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings.Desirable:A higher degree qualification such as a Masters, PhD or EngDGeneral awareness of budget and schedule management.An awareness of aerospace certification requirements.Experience of the Systems Development Lifecycle processYou will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering fieldWe are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually).We offer:What We'll Offer Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.As part of the Manufacturing Engineering team, the Senior Manufacturing Engineer will report directly to the Manufacturing Engineering Manager, with day-to-day guidance and support provided by the ME Team Leader. Based at our Luton site and supporting Defence business lines, there may occasionally be a need to travel to equipment supplier locations. The Senior Manufacturing Engineer will join a team focused on either Jet Canopies or Helicopters, contributing to the development of manufacturing processes as well as supporting daily operational activities.Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, earlier finish on Friday to start the weekend.Job Responsibilities Local project technical lead for the implementation of production planning, from original concept through to production.Design high capability manufacturing processes using GKNs Zero Defect Manufacturing (ZDM) tool suite, (APQP Core Tools).Develop, document and optimise manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process SpecificationsCreate and update engineering documentation, manage point of introduction activities.Lead structured improvement activities to reduce process driven scrap and reworkProvide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answeredMake presentations at senior level internally and externally demonstrating ability to clearly communicate to the audienceIdentify, anticipate and offer solutions to technical problemsEstablish & improve production process controlsComply with company Environmental, Health, Safety and Energy procedures.Profile description:To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/AerospaceDemonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry6Sigma Greenbelt qualificationExperience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process CapabilityExperience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniquesDemonstrable experience of practical problem-solving techniques using A3 or 8DDesirable:Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5SExperience in lay-up processes for composite materialsSpecification interpretation experienceWe are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in their approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we will assess each case individually)We offer:Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingDiscount with local nursery and preschool childcare settingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

Job Description:Salary: 59,400- 68,500Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity.Your impact Leonardo’s Global Combat Air Programme (GCAP) programme represents one of the most significant next‑generation defence avionics developments in Europe. This is a rare career‑defining opportunity to step into a pivotal national technical leadership role, at the heart of a world‑class engineering organisation with decades of expertise. Lead Manufacturing Engineering Specialists are responsible for developing robust solutions and having broad experience across a number of the lifecycle phases and must be able to demonstrate a 'through life approach’ to manufacturing engineering. Lead Manufacturing Engineering Specialist are expected to achieve objectives across longer term planning horizons and provide complex technical advice to both internal and external customers. As a Lead Manufacturing Engineering Specialist you will join the team to develop the operations manufacturing requirements of the future, taking innovative processes and equipment into account, enabling world class production of future Leonardo products. This role will require travel to other sites such as Edinburgh, Basildon and Southampton, with an opportunity to work from home on occasion. What you will do; Provide specialist input including the application of specialist skills and knowledge into a project team to help ensure the delivery of a technically sound solution meeting all stakeholder requirements Lead and deliver Manufacturing Engineering sections of the Manufacturing Maturity Reviews, maintain governance through the Lifecycle Management process and create / contribute / review and/or lead Manufacturing Plans, contributing to design and phase reviews, including demonstrating Manufacturing Readiness Level reviews Track external developments and disruptive technologies to identify exploitation and knowledge sharing within the project team Enable the future development of innovative manufacturing and testing processes for the EW domain by studying product requirements (including new materials), product/process/handling lessons learned, researching and exploring manufacturing methods and equipment; understanding feedback from internal stakeholders, conferring with equipment vendors or external suppliers Ensure manufacturing and test decision-making information is robust with objectives and results through preparing product and process reports by collecting, analysing, and summarizing information and trends Assure product and process quality by designing methods; validation/verification of process capabilities; establishing standards; confirming manufacturing processes Create a culture which improves manufacturing efficiency by generating innovative ideas and solutions developing into infrastructure, cyber security, physical security requirements for the factory of the future developing into capacity analysis, simulation planning workflow, space requirements, and equipment layout Take the above and developing manufacturing and test requirements for future designs, collaborating with engineering to influence concepts in preparation for the design and development stage Advise and participate on improving policies and processes within the operations framework Promote a culture of best practice sharing and knowledge exploitation Mentor, coach and develop more junior members of the team in order to develop overall capability Provide domain experience in support of customer and user engagement and product road maps Maintain product and company reputation by complying with government regulations What you’ll bring External Approvals (may include) Registration as an Chartered Engineer or other relevant Professional Body Knowledge, Skills & Experience In depth understanding of manufacturing and test processes and principles Ability to influence and negotiate with others using data and analysis to support line of reasoning A detailed understanding of the operational framework and business processes An understanding of cross functional / commercial business processes and their own impact Demonstrated knowledge, and experience of multiple phases of the Product Life Cycle and the associated processes Experience of peer reviewing the work of others inside a product team and within a sub Engineering Unit and ensuring the resulting actions are implemented Ability to communicate concepts in a non-technical way Confidence and ability to challenge / respond to technical / process issues whilst understanding the broad impact of solutions (systems thinking) Ability to interact effectively and manage the relationships with customers and suppliers Been involved in capability and / or process development, demonstrating an ability to implement a change to working practices Qualifications HND or above in an engineering related discipline This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. Security Clearance This role is subject to pre-employment screening in line with the UK Government’s Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: Why join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work–life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we’re here to help you thrive. Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year. Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution. Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity). Rewarding Performance: All employees at management level and below are eligible for our bonus scheme. Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning. Refer a friend: Receive a financial reward through our referral programme. Tailored Perks: Spend up to 500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more. Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team—they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now!Primary Location: GB - Luton - Cap. Green 300Contract Type:PermanentHybrid Working:HybridJob SummaryJob number: R0031175Date posted : 2026-07-14Profession: Manufacturing & Supply ChainEmployment type: Full time

Lead Hardware Engineer Based in Luton 12-month contract Paying up to £70p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: Required to solve complex technical challe

This would suit a Technical Engineer, Junior Design Manager, Mechanical Project Engineer, Mechanical Design Engineer or Technical Coordinator who wants more responsibility and more client-facing exposure. You do not need to be a fully established Design Manager. You do need to understand mechanical

Morson Edge is seeking a Principal/Lead Hardware Engineer for a major defence programme in the UK. You will work on advanced electronic systems for air, land and maritime platforms, focusing on FPGA and processor-based hardware throughout the lifecycle. You will collaborate with multidisciplinary teams to deliver high-performance hardware, support environmental/EMC tests, and produce technical documentation. #J-18808-Ljbffr

Just Recruitment is working with a growing business, at the forefront of their sector, looking to add a Field Service Engineer to their team - covering South - candidates will ideally be based around Luton and surrounding areas. Key requirements:Previous experience of performing in a technical field

We're looking for an Applications Engineer to become part of our experienced and supportive team. This is a varied role where no two days are the same. One day you could be proving out a brand-new machine for a customer, the next you'll be delivering operator training, developing machining strategies, or demonstrating the latest technology to customers and dealers. BASIC SALARY: £36,000 BENEFITS: · Bonus payments of up to £12k a year - as a result of the company carrying out services, machine sales and demonstrations · 25 days holiday plus bank holidays · Company car · Life insurance · Permanent Health insurance LOCATION: Watford COMMUTABLE LOCATIONS: Ruislip, Harrow, Barnet, Stanmore, Wembley, Luton, Hemel Hempstead, Potters Bar, Welwyn Garden City, Borehamwood, St Albans, Rickmansworth JOB DESCRIPTION: Applications Engineer - Industrial Machinery As our Applications Engineer, you'll play a key role in supporting customers throughout the entire lifecycle of their machines, ensuring they achieve the very best performance from their investment. Your responsibilities will include: · Visiting customer sites across the UK and Ireland to install, set up and prove our machines. · Delivering operator and engineer training for customers and dealer networks. · Developing machining methods, tooling strategies and CNC programs to solve customers' manufacturing challenges. · Supporting the sales team with technical demonstrations, time studies and machining solutions. · Carrying out machine demonstrations for customers and dealers, explaining machining processes in a clear and engaging way. · Installing machines in customer facilities and showrooms. · Testing and commissioning machines to ensure safe, reliable operation. · Providing telephone and on-site technical support for customers and dealers. · Learning new machine technologies and attending manufacturer training courses. · Supporting exhibitions, open days and customer events throughout the UK and Europe. PERSON SPECIFICATION: Applications Engineer - Industrial Machinery We're looking for an Applications Engineer who enjoys engineering just as much as they enjoy helping people. You'll ideally have: · Experience and a proven track record a similar position within CNC machinery or manufacturing. · Strong knowledge of metal cutting processes, tooling and machining methods. · The ability to develop complete manufacturing processes for finished components. · Excellent problem-solving skills and a practical engineering mindset. · Confidence communicating with customers, operators and colleagues. · The ability to work independently while also thriving as part of a collaborative engineering team. · A willingness to travel throughout the UK, Ireland and occasionally overseas. THE COMPANY: We are a world leading CNC machine tool manufacture supplying the latest CNC mill-turn technology to UK industry. We have been successfully serving UK manufacturing industry since 1974, famous also for our precision watches and electronics. Our products encompass our extensive range of high performance including sliding and fixed head CNC lathes. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18602, Wallace Hind Selection TPBN1_UKTJ

Job Description:Salary: 44,147 to 61,950Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity.Leonardo has a fantastic opportunity for a Senior Test Solutions Engineer to join the Test Solutions team supporting several projects. Ideally you will have a mix of Systems and Hardware engineering as a background and want to progress your career to the next level.The role offers hybrid working from home and onsite at our Luton site. The role is within the Surveillance and Protection Technologies (S&PT) business area. The role will entail dealing with multiple internal and external clients on a project-by-project basis to develop and deliver world class test solutions and system designs.We are looking for a Senior Test Solutions Engineer to join the engineering team to work on several projects. This role will involve being part of an exciting programme, working to deliver key technologies for the future. Working within a multi-disciplined team, you will be responsible for developing requirements, MATLAB modelling and contributing to the RF design analysis, integration and test phase. The role will include reviewing, assessing and providing technical guidance throughout the engineering design process.What you'll do:What you will do as a Senior Test Solutions Engineer:The scope of work can range from design and technical problem solving to test solution development.Create and capture Test Equipment Requirements for RF, Digital and Analogue based test systemsCreate and capture Production Test Requirements for main equipment, covering PCB and System Level testingBeing a key team member contributing to the RF and system design as well as the test and integration activities.Assessment of the design integrity of the design prior to formal design reviews.Working across the full engineering lifecycle.Engagement in engineering technical meetings and suppliers.Managing all levels of requirements to enable design and development decisions.Influencing requirements and design decisionsActively supporting knowledge sharing and exploitation of best practice.Producing effective, accurate and concise technical reports and analysis to support key technical decisions for the programme.Establishing and maintaining good lines of communication to the Project Engineering Manager/LeadDelivering to agreed performance targetsActively support knowledge sharing and exploitation of best practice.Contributing to IPT decision making at engineering task levelParticipating in continuous improvement activities to develop skills and competencies within the individual’s own engineering disciplineWhat you’ll bringWe are looking for someone with experience working on complex electronic and electromechanical systems, with an Aerospace and Defence background, with a solid understanding of test equipment development for production use.In this role you will be a technically minded person with a good understanding of the project lifecycle and familiar with working across all levels within an Integrated Project Team. In addition to this, you will have some exposure to the following:Hands-on experience of designing/developing complex Test Solutions for the full lifecycleGood understanding of the Systems engineering lifecycle.Experience of working with external suppliers and outsourcing complex work packages.Experience of NI LabVIEW & TestStand.Degree qualified (or equivalent)Knowledge of airborne EW SystemsExposure to toolsets such as IBM DOORS, and PDM toolsKnowledge and understanding of test equipment across the platform productsKnowledge and understanding of Bus Analysers, Spectrum Analysers, RF Power MetersAbility to make informed decisions based on obtaining information from the relevant technical sources.An excellent and confident communicator and presenter, with the ability to engage with multiple internal and external stakeholders.Ability to effectively manage own time, potentially across multiple activities.This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn.Primary Location: GB - Luton - Cap. Green 300Contract Type:PermanentHybrid Working:HybridJob SummaryJob number: R0031879Date posted : 2026-07-22Profession: EngineeringEmployment type: Full time

Electrical Systems EngineerBedford, commutable from: Kettering, Cambridge, Northampton, Luton, Milton Keynes60,000-65,000 + Day Shifts + Development + Private Health Insurance + 26 Days Holiday (+ BH)Excellent opportunity for an experienced Electrical Engineer to join an innovative company during an exciting period of growth and transformation, taking on an instrumental role in maintaining and developing a world-class aerospace testing facility.On offer is an autonomous position where you will play a key role in the design, maintenance and continuous improvement of complex electrical systems, supporting the ongoing operation and future development of this unique industrial site.This company operates one of the only facilities in the world specialising in its niche field. They are now looking for a Senior Electrical Systems Engineer to join their multidisciplinary engineering team and contribute to the continued success and expansion of their globally recognised operation.The day-to-day responsibilities of this role include maintaining and upgrading legacy electrical systems, delivering new engineering projects from concept through to commissioning, investigating plant performance, troubleshooting operational issues and driving continuous improvement across the facility.The ideal candidate will hold a degree in Electrical Engineering or a related discipline, have industrial experience working with complex plant or machinery and possess a strong understanding of electrical systems. Experience with control systems, PLCs or electronics would be advantageous.The Role:Electrical systems engineering within a complex industrial environmentDesigning, maintaining and upgrading plant and facility electrical systemsDelivering projects from requirements through to commissioningMonday to Friday, site-based roleThe Person:Degree qualified in Electrical Engineering or similarIndustrial electrical engineering experienceKnowledge of electrical system design and industrial machineryExperience with PLCs, control systems or electronics desirableComfortable taking ownership of engineering projects and working hands-on when requiredReference Number: BBBH276080To apply for this role or to be considered for further roles, please click "Apply Now" or contact Eve Terry at Rise Technical Recruitment.Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.We are an equal opportunities company and welcome applications from all suitable candidates.Discipline(s): Rise EngineeringJob type: Permanent

Senior Electronic Test Engineer. Are you an Electronics Engineer with Test experience looking to join a renowned business where you'll play a pivotal role in the company's success, while also benefiting from technical development and opportunities to progress?. You will be responsible for en

CNC Laser Operator (Technical Support Engineer Training). Are you a CNC Laser or Punch Press Operator / Programmer, looking to work for an industry-leading OEM, who are offering a rare opportunity to step-up and become a Technical Support / Applications Engineer?. On offer is an office based role, w

Technical Support Engineer - CNC Lasers Starting Basic Salary up to £35'000 + Vehicle + Progression + Training + Excellent Company Benefits Are you a CNC Laser or Punch Press Programmer, looking to work for an industry-leading OEM, who are offering a rare opportunity to step-up and become a Tec

Technical Support Engineer - CNC Lasers Starting Basic Salary up to £35'000 + Vehicle + Progression + Training + Excellent Company Benefits Are you a CNC Laser or Punch Press Programmer, looking to work for an industry-leading OEM, who are offering a rare opportunity to step-up and become a Tec

Technical Support Engineer - CNC Lasers Starting Basic Salary up to £35'000 + Vehicle + Progression + Training + Excellent Company Benefits Are you a CNC Laser or Punch Press Programmer, looking to work for an industry-leading OEM, who are offering a rare opportunity to step-up and become a Tec

Technical Support Engineer - CNC Lasers Starting Basic Salary up to £35'000 + Vehicle + Progression + Training + Excellent Company Benefits Are you a CNC Laser or Punch Press Programmer, looking to work for an industry-leading OEM, who are offering a rare opportunity to step-up and become a Tec

This role is ideal for an experienced CNC Laser Programmer or Applications Engineer with relevant NVQ, City & Guilds or Degree-level qualifications, looking to take the next step in their career. Support and deliver technical demos on advanced CNC laser and punch press systems. Experienced in CN

Fuel your future with AO – and unlock serious earning potential. We're all about making work, work for you. With a shift pattern designed for real life, you'll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It's everything you need to power your career forward, with a team that's got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You'll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You'll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years' experience in gas installations It'd be great if you also have: Some experience installing electrical appliances (but don't worry — we'll give you all the training you need to get up to speed) Our Benefits: What's in it for you At AO, we've designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you'll work less than half the year. A company van with fuel paid for, so you're ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that's not all — there's plenty more to discover when you join the team Click ‘Apply' now to join our family and find out more about the Gas Installations Engineer role. TPBN1_UKTJ

Senior Electrical Engineer needed for technical support and project completion in London.

Seeking a Technical Event Production Engineer with Tricaster certification for live event planning, production, and remote services in a broadcast studio. Responsibilities include media production, event execution, and supporting a regional team.

A Lift Service Engineer is needed to cover Luton, manage service routes, attend breakdowns, perform planned maintenance, and provide technical support to customers.

A Lift Service Engineer is needed to cover Luton, manage service routes, attend breakdowns, perform planned maintenance, and provide technical support to customers.

Quality Engineer Luton 6-Month Contract Paying up to £37p/h (Inside IR35) Key Responsibilities Act as the Quality focal point for in-service and returns material activities Support investigation and resolution of non-conformances, including root cause analysis and corrective actions Review and approve quality documentation related to returns, concessions, and repair activities Ensure effective traceability and configuration control of returned and unserviceable items Interface with internal stakeholders (Engineering, Supply Chain, and Operations) and external suppliers Ensure compliance with AS9100, Quality Management System, and customer contractual requirements Contribute to continuous improvement activities across in-service quality processes Deliver compliant products in a timely manner, meeting all cost and safety requirements Provide reports and supporting data to the Programme, Project, and functional teams Required Experience Further education and/or experience in Engineering, Quality, Manufacturing, or a similar discipline within Defence Electronics or a comparably complex industry Demonstrated knowledge of AS9100 / ISO9001 and Continuous Improvement principles Experience with Quality tools such as Root Cause Corrective Action, Pattern Fault Lifecycle, Verification, etc. Logical thinker, capable of turning complex data into practical, actionable solutions aligned with business goals Strong interpersonal skills with a collaborative working style across all functions Excellent analytical skills and attention to detail Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Field Service Engineer (Power Generation) £37,000 - £38,750 Basic + Overtime (OTE £60K+) + Vehicle + Training + Technical Progression + Door to Door Pay + Enhanced Pension + Package Bedford Are you a mechanical bias engineer who is looking to work for a leading company within the renewable power generation sector where you can technically increase your knowledge and skill set? A fantastic opportunity on offer to become a technical specialist in a varied & thriving industry. Earn a good package whilst consistently training & progressing into more senior positions. This company are heavily involved in the UK's transition to a net zero economy This energy company are an established and specialist provider of a green energy supply to their customers. To help provide low carbon solutions for their infrastructure. With a huge client portfolio this is a brilliant chance to join a leading manufacture within the power generation sector. They believe in their staff; they believe in development and are also keen to progress from within. Key Responsibilities: Service, maintenance, and breakdowns Working on CHP, GAS Engines and renewable energy systems Electrical fault finding and repairs (ComAp, three phase, drives, motors, PLC) Customer facing role Monday to Friday covering surrounding territoryBackground Required: Experience working with 450KW+ Familiar with CHP, Gas Engines, Generators, Industrial Plant or similar Experience as a Service Engineer/ Maintenance Engineer/ Marine Engineer Electrical or Mechanical qualifications or time served (NVQ, HNC or equivalent)INDGLO

Product Development Engineer £45,000 - £50,000 + Training and Development + Annual Bonuses + Company benefits Luton (Commutable from: Dunstable, Milton Keynes, Watford, Stevenage, St Albans) Are you a Mechanical/Product Development Engineer looking to work on a variety of products with real ownership and long-term technical development? On offer is a hands-on role where you'll develop existing technical products, working closely with manufacturing partners and gaining exposure to the full product lifecycle in a growing business. This is an established and expanding organisation with a strong market presence, known for investing in its people and offering ongoing training, support, and the opportunity to broaden your engineering skillset within a collaborative team. In this role, you will support new product development, improve existing designs, coordinate prototyping and testing, and work cross-functionally to deliver high-quality, compliant products. You'll also be involved in problem solving, technical documentation, and driving continuous product improvements. This role would suit a Mechanical or Product Development Engineer looking for a varied, technically engaging position with opportunities to develop and grow long-term. The Role: Enhance and develop existing products with real ownership Improve and refine designs in a handson engineering role Collaborate across teams and with global manufacturing partners The Candidate: Mechanically biased engineer with product development experience Strong problem solver with a structured, proactive approach Confident communicator who can work independently and within a team Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sagar Sherchan at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Company Description ALTEN is a global engineering and technology consultancy operating across over 35 countries worldwide. We partner with industry leaders across sectors including Aeronautics, Aerospace, Defence, Naval, Automotive, Energy, Rail, IT and many more to deliver innovative engineering solutions that drive technological advancement & support sustainable transformation. Our teams of passionate and agile engineers work on cutting-edge projects that shape the future of technology and sustainability. At ALTEN, we empower talented engineers to innovate, solve complex challenges, and deliver impactful solutions that build tomorrow’s world—today. Join us and start building tomorrow’s world today! Job Description As a Junior Systems Engineer, you will join our Bristol team to support our activities within the aerospace sector. This is an excellent opportunity for an early-career engineer to develop expertise in systems engineering within a highly regulated aerospace environment. You will support the integration of requirements management systems and contribute to the development of hydraulic systems for aerospace applications. Working alongside experienced engineers, you will gain exposure to the full systems engineering lifecycle, from requirements capture and analysis through to validation and verification. Location: Bristol On Site: Hybrid Clearance: Clearable Experience Level: Junior (1-3 years experience) Key Responsibilities: Support the capture, analysis, and management of system requirements throughout the project lifecycle Assist with the integration and maintenance of requirements management systems and tools Work with multidisciplinary engineering teams to ensure requirements are clearly defined and traceable Support the development and integration of hydraulic systems within aerospace programmes Contribute to requirements verification and validation activities Assist in the preparation and maintenance of engineering documentation, reports, and specifications Support design reviews and technical meetings with internal and external stakeholders Ensure compliance with aerospace standards, processes, and quality requirements Qualifications Required Skills: Understanding of systems engineering principles and methodologies Experience working with requirements management processes or tools Basic knowledge of hydraulic systems and their operation Ability to analyse technical information and translate it into structured requirements Strong attention to detail and a methodical approach to problem-solving Good written and verbal communication skills Ability to work effectively within multidisciplinary engineering teamsRequired Qualifications: A Bachelor’s or Master’s degree in Engineering, or equivalent military experience. Experience gained through industry placements, internships, graduate programmes, or early-career engineering roles Understanding of the engineering development lifecycle Familiarity with technical documentation and engineering standardsDesirable Skills: Experience with requirements management tools such as DOORS, DOORS NG, Polarion, or Jama Knowledge of aerospace hydraulic systems and associated components Exposure to systems integration, verification, or validation activities Understanding of Model-Based Systems Engineering (MBSE) concepts Experience working within aerospace, defence, or other regulated industries Knowledge of aerospace standards and certification processes Additional Information Why join us? We bring together entrepreneurial, tech-driven people to deliver innovative solutions for leading companies. At ALTEN, you’ll work on exciting projects, supported by ongoing learning, mentoring, and clear career development tailored to your goals. Join a passionate team and help build tomorrow, today. In short you get: A personalised career path and a rewarding management style A huge diversity of engineering projects and industries Private Medical Insurance Cycle & Tech Scheme Employee assistance programme Life insurance & Pension Scheme Social atmosphere, regular gatherings & team buildings Flexible way of working (role dependent)We are proud to support the Armed Forces Covenant & actively encourage applications from members of the Armed Forces community, including veterans, reservists, service leavers, and military spouses/partners. We recognise the value of military skills and experience and are committed to ensuring that no applicant is unfairly disadvantaged during our recruitment and selection processes. ALTEN is committed to fostering a diverse and inclusive workplace and values the strength that comes from a global mix of backgrounds and perspectives. We welcome applications from all suitably qualified candidates, regardless of background or protected characteristics under the Equality Act 2010. If you require any reasonable adjustments during the recruitment process, please let us know. This role may require you to have or be willing to go through Security Clearance. As part of the onboarding process candidates will be asked to complete a Baseline Personnel Security Standard; details of the evidence required to apply may be found on the government website (url removed). If you are unable to meet this and any associated criteria, then your employment may be delayed, or rejected . Details of this will be discussed with you at interview

Field Service Engineer (Mechanical or Electrical) Covering North/North East London Outside M25 - Watford, Chelmsford, Aylesbury and surrounding £35,000 - £45,000 + Company Vehicle + Door-to-Door Pay + Full Training + Overtime + Bonus + Pension + Private Medical + Life Insurance Do you have experience working in a field service or maintenance environment, with either a mechanical or electrical bias? Are you looking for a field-based position within the renewable energy sector that offers full training, autonomy, overtime and long-term development? This company is a leading provider of low-carbon fuel solutions, supporting the UK transport industry with an expanding network of specialist refuelling infrastructure. Due to continued growth, they are looking for an Operations & Maintenance Technician to join their team covering the Southeast. In this role you will help ensure specialist refuelling sites remain safe, reliable and operational. Your duties will include routine inspections, planned and reactive maintenance, basic fault finding, minor repairs and supporting contractors on site. Full training will be provided over approximately 3-6 months, with the company happy to consider candidates from a range of transferable field service backgrounds. This could include forecourt field service, water, telecoms, utilities or similar, providing you have a practical mechanical or electrical background. This is an ideal opportunity for a field-based technician looking to develop their skills within a growing and future-focused industry. The role: Field-based role covering Southeast England. Company vehicle and fuel card provided. Door-to-door pay. 3-6 months full training provided. 1 in 5 call out rota (after training period) Planned and reactive maintenance. Routine site inspections and basic fault finding. Supporting contractors and ensuring safe working practices. *Participating in a call-out rota following training. The person: Experience in a field service, maintenance or engineering environment. Mechanical OR electrical bias. Strong practical aptitude and willingness to learn. Full UK driving licence. Comfortable working independently and travelling regularly. Experience in forecourt, water, telecoms, utilities or similar is advantageous. Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Description Join us, be part of more. We're so much more than an energy company. We're a family of brands revolutionising how we power the planet. We're energisers. One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesn't rely on fossil fuels whilst living our powerful commitment to igniting positive change in our communities. Here, you can find more purpose, more passion, and more potential. That's why working here is #MoreThanACareer. We do energy differently - we do it all. We make it, store it, move it, sell it, and mend it. About your team: At British Gas, our mission is to sell it and mend it. We've been powering the UK's homes and businesses for over 200 years - but supplying energy is just part of what we do. We're making the UK greener and more energy efficient, getting closer to Net Zero. By using clever tech like thermostats, heat pumps, solar panels and EV chargers, we're making it cheaper and easier for our customers to reduce their carbon-footprint. At British Gas, our engineers are at the heart of what we do. Every day, customers invite us into their homes because they trust us to put things right, quickly, safely and professionally. We're now looking for experienced White Goods Engineers (Contractors) to work alongside our established engineering community and help us deliver on our British Gas Service Promise , including our commitment to same-day fixes wherever possible. This is a great opportunity for skilled, customer-focused engineers who take pride in their work and want consistent, flexible contractor work with one of the UK's most recognised service brands. The Role As a contractor White Goods Engineer supporting British Gas, you'll attend customers' homes to diagnose, repair and maintain a wide range of kitchen and white goods appliances . You'll be trusted to work independently in the field, representing the British Gas brand in customers' homes, while having access to strong operational, managerial and technical support when you need it. Some repairs can be complex, so confidence, experience and a calm, professional approach are essential. Typical appliances you'll work on, will be Washing machines, Tumble dryers, Dishwashers, Refrigeration & Microwaves Why Work With British Gas? Consistent volumes of work with a trusted household name Competitive contractor rates - DOE Local work allocation where possible Structured job flow and scheduling support Access to technical guidance and field support when required Opportunity for ongoing, long-term contractor engagement What We're Looking For At least 2 years' proven, hands-on experience repairing white goods appliances Broad technical knowledge across multiple appliance types Strong fault-finding and diagnostic capability Excellent customer service skills - you understand that how you fix matters as much as what you fix A commitment to safe working and first-time-fix outcomes Pride in your workmanship and professionalism in customers' homes Contractor Essentials Self-employed / contractor status Your own tools and test equipment appropriate for white goods repair Full UK driving licence and access to a suitable vehicle Relevant insurances (e.g. Public Liability) If you're an experienced White Goods Engineer who takes pride in delivering great service and wants the backing of a brand customers know and trust, we'd love to hear from you. Why should you apply? We're not a perfect place - but we're a people place. Our priority is supporting all of the different realities our people face. Life is about so much more than work. We get it. That's why we've designed our total rewards to give you the flexibility to choose what you need, when you need it, making sure that you and your family are supported not only financially, but physically and emotionally too. Visit the link below to discover why we're a great place to work and what being part of more means for you. https://www.morethanacareer.energy/britishgas If you're full of energy, fired up about sustainability, and ready to craft not only a better tomorrow, but a better you, then come and find your purpose in a team where your voice matters, your growth is non-negotiable, and your ambitions are our priority. Help us, help you. We would love for you to share any information about yourself throughout our recruitment process so that we can better understand you and help shape your journey. TPBN1_UKTJ