Trabajos telecommunications engineer en Reino Unido

Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent – Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: • Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies., • Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design., • Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns., • Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks., • Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control., • Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc., • Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware., • Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure., • Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents., • Conduct system upgrades, testing, and validation for new features, components, and patches., • Implement cybersecurity measures to safeguard SCADA systems against emerging threats., • Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems., • Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process., • Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions., • Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence., • Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network., • Collaborate closely with other designers, construction professionals, and engineering teams., • Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted., • Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers., • Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector., • Technical and Professional knowledge and experience associated with the role., • Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications., • Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies., • Education: Bachelor’s degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master’s degree may be preferred for senior roles., • Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable., • Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste

Our client in the Telecommunications sector is looking for a Field Installation Engineer to join their growing team. This role will involve travelling across the UK to install, configure, and maintain telephone systems and related equipment for customers. The successful candidate will be customer-focused, technically competent, and able to work independently while representing the company in a professional manner. Key Responsibilities: • Install, configure, and test business phone systems at customer sites., • Provide on-site troubleshooting, diagnostics, and repair of telecommunication systems., • Ensure installations meet company and industry standards for quality and safety., • Train customers on system usage and provide aftercare support as required., • Maintain accurate documentation of installations, service visits, and customer interactions., • Liaise with internal teams to ensure smooth delivery of projects and services., • Previous experience as a telecoms/phone installation engineer (field-based role preferred)., • Strong knowledge of VoIP technologies, SIP, PBX systems, and network infrastructure., • Basic networking skills (LAN/WAN, routers, switches, firewalls)., • Full UK driving license (essential)., • Excellent problem-solving skills and the ability to work under minimal supervision., • Competitive salary (dependent on experience)., • A car allowance, or a company vehicle, fuel card., • All tools and equipment required., • Ongoing training and professional development., • Opportunity to work with a forward-thinking telecoms provider. By applying for this position, you consent to Futurelink processing your personal data for recruitment purposes, in accordance with applicable data protection legislation.

An exciting opportunity for an experienced Radio Systems Engineer to join an innovative technology company delivering advanced two-way radio, RF and communications systems across healthcare, education and public sector environments. Radio Systems Engineer London, E14 9NN, working in the office and on customer premises • Full-time, permanent position We are a supplier of software and hardware solutions for the Healthcare, Local Authority & Education sectors. This includes Two-Way Radio Systems, Task Management, Auditing & Compliance, & Asset Tracking Systems. We deploy client software through integration with Two-Way Radio Systems, Android, & IOS devices. We also utilise MPLS and Mobile Network Operators to integrate our systems. This role offers an excellent opportunity to join a company operating at the cutting edge of system integration. We value collaboration, integrity & innovation; we support our staff to help them reach their professional & personal goals. Duties & Responsibilities: You are required to oversee all the daily activities of the customers' radio systems, including but not limited to. • Excellent knowledge of DMR / PMR radio equipment programming (Motorola, Hytera, Kenwood), • Extensive troubleshooting to the component level for digital radios, • Comprehensive site survey for distributed antenna system deployment, • Maintenance contract service & repairs, • Presales & post-sales support, • Engages in all aspects of Health & Safety, • Customer training, • Good soldering skills, • Good use of test equipment, • Accurate record keeping of customers' technical documentation and equipment profiles, • Excellent communication with customers Essential Skills: • 5 years working in the business radio engineering sector, • Investigate & rectify RF interference & intermodulation, • Experience with distributed antenna systems, • EMF testing and measurements to meet Ofcom requirements, • Able to work away from home, • Experience working with VoIP & IP networks, • Full UK driving licence Desirable: • Radio Engineering: City & Guilds, • HNC Electrical, Electronics, or similar, • ECS card holder, • Experience with body-worn camera & CCTV integration with radio systems Skills & Attributes: • Carries out tasks as agreed, • Ensures their work is of a very high standard, • A good communicator, written and oral, • Thrives in a fast-paced environment and can easily adapt to change, • Can work in a team and work independently, • Can manage their own time and prioritise workload, • Good computer knowledge, • Good written & verbal skills, • A can-do attitude, • Can build and maintain excellent relationships with colleagues, customers & suppliers Place of work: • Office, • Customer premises, • Remote Benefits: • Flexible working hours, • Pension, • Overnight & on-call pay, • Bonus scheme, • Mobile phone, • Private medical Insurance, • Company vehicle How to apply for the role: If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies, please. Other suitable skills and experience include RF Engineer, Telecommunications Engineer, Radio Communications Engineer, Field Service Engineer, Wireless Communications Engineer, Electronics Engineer, RF Systems Engineer, Communications Engineer, Technical Support Engineer, Systems Integration Engineer.

Who We Are: This role is being hired into Cingularity a division of IMG Studios who are specialists in bespoke live video networking and production solutions. Cingularity operate at each stage of the remote production workflow, delivering quality network designs and primary distribution services to premium broadcast networks and sports rights holders globally. Please follow this link to understand more about Cingularity’s work: ___ IMG acquired Cingularity in September 2022 to provide the expertise to guide IMG’s remote production evolution toward a hybrid model of fibre, satellite, cloud and IP. IMG is a leading global sports marketing agency, specializing in media rights management and sales, multi-channel content production and distribution, brand partnerships, strategic consulting, digital services, and events management. It powers growth of revenues, fanbases and IP for more than 200 federations, associations, events, and teams, including the National Football League, English Premier League, International Olympic Committee, National Hockey League, Major League Soccer, ATP and WTA Tours, the AELTC (Wimbledon), Euroleague Basketball, CONMEBOL, DP World Tour, and The R&A, as well as UFC, WWE, and PBR. IMG is a subsidiary of TKO Group Holdings, Inc. (NYSE: TKO), a premium sports and entertainment company. TKO Group Holdings, Inc. (NYSE: TKO) is a premium sports and entertainment company. TKO owns iconic properties including UFC, the world’s premier mixed martial arts organization; WWE, the global leader in sports entertainment; and PBR, the world’s premier bull riding organization. Together, these properties reach 1 billion households across 210 countries and territories and organize more than 500 live events year-round, attracting more than three million fans. TKO also services and partners with major sports rights holders through IMG, an industry-leading global sports marketing agency; and On Location, a global leader in premium experiential hospitality. Working Conditions: Permanent, London - Hanbury St, Spitalfields Shift Work Patterns, including weekend work What You'll Do: To provide expert technical support, monitoring, and maintenance for Cingularity's global network and video services, ensuring flawless delivery of live broadcast content. The TOC Network Engineer plays a critical role in the 24/7 Technical Operations Centre (TOC), proactively identifying and resolving issues, implementing solutions, and contributing to the continuous improvement of Cingularity's services. This role requires a potent blend of technical expertise, customer service skills, and the ability to perform under pressure in a live broadcast environment. Key Responsibilities Operational Support & Team Contribution: • Proactively monitor the Cingularity Network, associated systems, and video services using monitoring tools (e.g., Nimbra Vision, Zabbix, Grafana, Mult viewers and Transport-Stream Probes)., • Participate in team rotas utilising hybrid follow the sun model, ensuring 24/7 monitoring, support, and maintenance coverage., • Contribute to a culture of high performance, collaboration, continuous learning, and customer focus within the TOC team., • Execute live transmissions, including routing, check-in, monitoring, and check-out procedures, ensuring flawless service delivery., • Provide direct customer support via phone and email, address service issues, bookings, and other inquiries, and collaborate with partners and suppliers as needed., • Proactively identify and address potential issues before they impact service delivery., • Resolve network and service issues, working from initial investigation to final resolution, isolating the cause, and minimising impact., • Log, analyse, and act upon all incidents promptly, contributing to incident reports and root cause analysis., • Assist in the development and maintenance of incident management and disaster recovery plans., • Contribute to reviewing, refining, and documentation of TOC workflows, processes, and procedures., • Maintain accurate records of network configurations, service documentation, and incident logs., • Assist in the implementation of bespoke customer solutions, working alongside project management. This includes:, • Device configuration and testing., • Network and service documentation., • Installation and commissioning., • Contribute to core network development, maintenance, and upgrading of the Cingularity DTM and IP Networks., • Support video system development, maintenance, and upgrading for baseband and IP systems, including encoders, decoders, and routers., • Contribute to evaluating new technologies, tools, and systems to improve TOC capabilities. You Have These: Essential: • Proven experience as a Network Engineer or Broadcast Engineer with excellent network knowledge., • Strong knowledge of Broadcast environments and workflows., • Familiarity with maintaining and operating transmission equipment, including encoders, decoders, and video routers., • In-depth knowledge and experience of TCP/IP Stack, including switching, routing, and multicast., • Proficiency in Office 365 or G-Suite, with excellent working knowledge of Excel or Google Sheets., • Excellent interpersonal, written, and oral communication skills., • Proven record of providing an exceptional customer experience., • Excellent attention to detail and the ability to remain focused under pressure., • Proven analytical and problem-solving skills., • The ability to follow and develop operational processes to a high standard., • Drive to build their knowledge and skills on existing and emerging technologies., • Self-motivated and organised individual., • Flexibility to work unsociable hours as required to cover sporting events. Advantageous: • Knowledge of the Net Insight portfolio, including experience on the MSR platform, is highly advantageous., • Experience with standard routing protocols such as OSPF and BGP., • Experience in video and audio encoding technologies and parameters., • Knowledge of fibre optical technologies with experience in deployments and troubleshooting., • Proficient in Windows and Linux operating systems. Added MacOS., • Experience with booking systems and/or automation systems., • A degree in engineering, telecommunications, or a related field., • Python scripting experience. Unusual Challenges • International travel will be required at least once a year to support our global team., • The TOC Network Engineer must be able to manage the pressure of a live broadcast environment, where even minor technical issues can have significant consequences., • Cingularity operates a hybrid follow-the-sun support model, and this role's working hours are on an evolving shift pattern. Engineers do not work hours between 00:00 and 07:00. TKO EEO Statement: TKO is an Equal Opportunity Employer and complies with all applicable federal, state, and local laws regarding non-discrimination in employment. TKO makes employment decisions based on merit and qualifications, without considering an employee’s or applicant’s race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, marital status, veteran status, or any other basis prohibited under federal, state or local laws governing non-discrimination in employment in every location in which the Company has facilities. TKO also provides reasonable accommodations for qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and applicable state or local laws. For information about Privacy and Information Security for TKO employment candidates, please review our ___. For information regarding Terms of Use for this and other TKO websites, please review our ___

First Point Group is recruiting for an IMS Test Engineer on behalf of a global telecommunications technology provider delivering advanced 4G and 5G network solutions across Europe. The successful candidate must have strong expertise in IMS and 4G/5G core technologies, experience testing client applications across multiple operating systems, and advanced LTE testing and troubleshooting skills using tools such as Wireshark, IXIA, Viavi or Spirent. PLEASE NOTE - sponsorship can not be provided. Candidates must live in the UK with valid rights to work including 5+ years of current continuous residence in the UK due to SC Security Clearance required upon joining. This is an exciting opportunity to join a highly specialised test and certification team focused on delivering next-generation communication solutions across telecom and public service networks. The team is responsible for validating the performance, reliability, and availability of advanced solutions spanning device clients, RAN, and core network environments. You will work closely with highly skilled engineers locally and internationally to ensure solutions meet customer expectations, contractual milestones and service level agreements. Responsibilities • You will act as a technical expert in IMS, applying a strong analytical approach to troubleshooting, root cause analysis and end-to-end testing., • Provide solution expertise and guidance for IMS Client and IMS Application test strategies and test plans across all network elements and software releases., • Execute functional, performance, accessibility and compatibility testing., • Track and report test progress against defined project timelines and objectives., • Validate supporting test cases, upgrade procedures, troubleshooting guides and product documentation to ensure consistent test execution., • Perform deep-dive analytics and fault investigations across feature and performance test cases, delivering resolutions within SLAs., • Provide feedback and recommendations on training and development plans for yourself and other test engineers., • Execute client porting and verification testing, ensuring R&D inputs are captured to support development milestones., • Produce test execution reports, performance logs and analysis documentation., • Manage the lifecycle of trouble tickets, ensuring detailed information is captured for R&D investigation and resolution., • Provide technical support for sandbox testing environments, including analysis and logs for third-party integrations and solution development. Experience and Qualifications • Strong background knowledge of 4G/5G Core technologies, particularly voice, video and data services., • Experience working with IMS client applications and SDK solutions across Android (GMS, Non-GMS and Android Go), iOS, Linux and Windows., • Hands-on experience with LTE testing tools and protocol analysis, including Wireshark, SIP, RTP, RTCP, Diameter, IXIA, Viavi, Spirent, XCAL, XCAP, QXDM, Jira, HPQC and Logcat/Putty., • Experience with software lifecycle testing for VNF architecture deployments on VMware., • Knowledge of client software deployment methods such as OTA and EMM., • Expertise in end-to-end troubleshooting across LTE and TETRA networks and call flows., • Strong understanding of 3GPP specifications and telecom service architecture., • Ability to maintain high standards while working in fast-paced and dynamic environments., • Engineering degree or equivalent experience in Computer Science, Electronics, Telecommunications or a related field. What Success Looks Like • Highly motivated and self-driven to contribute effectively within a specialist team of testing experts., • Ability to execute complex test activities aligned to project milestones and delivery timelines., • Work collaboratively with PMO teams to provide clear project updates and identify potential risks., • Build strong working relationships with customers, partners and internal teams., • Act as a subject matter expert for deep technical investigations across end-to-end LTE and TETRA network architectures., • Provide reliable support during on-call rotations and critical testing phases.

Job Summary We are seeking a Nokia SDN Engineer to design, implement, and support Software-Defined Networking (SDN) solutions within telecom and enterprise environments. The role involves working with SDN controllers, network automation, and programmable network infrastructure to deliver scalable and highly available network services. The ideal candidate should have strong experience with IP/MPLS networks, automation, and Nokia SDN platforms in hybrid cloud environments. Key Responsibilities * Design, deploy, and manage Nokia SDN-based network architectures . * Implement network automation and orchestration for provisioning and life cycle management. * Configure and troubleshoot IP/MPLS networks and SDN controllers. * Integrate SDN solutions with cloud and hybrid infrastructure environments. * Develop and maintain network automation scripts using Python or similar tools. * Monitor network performance and optimize traffic engineering policies. * Collaborate with cross-functional teams including cloud, security, and DevOps. * Provide support for incident management, root cause analysis, and service restoration. Required Skills & Qualifications * Bachelor's degree in Computer Science, Telecommunications, or related field. * 3-7 years of experience in network engineering or SDN environments. * Strong knowledge of: IP/MPLS networking * Routing protocols (BGP, OSPF, IS-IS) * SDN architectures * REST APIs and automation * Experience with network virtualization and cloud networking. * Familiarity with Linux environments and Scripting (Python, Ansible).

Head of Grid Connections – EV Charging Location: North West England HQ Working Pattern: Hybrid Employment Type: Permanent Package • Up to £150,000 total package depending on experience, • Equity / Profit Share opportunity, • Hybrid working About the Company My client is a privately owned, multi-disciplinary infrastructure contractor delivering utilities and civil engineering projects across the UK. The business specialises in multi-utility infrastructure, including electricity networks, telecommunications, water, gas, and renewable energy projects. Based in the North West of England, the company works closely with DNOs, ICPs, and major infrastructure partners to deliver projects from design through to construction and deployment. As the business continues to expand within the EV charging and energy transition sector, they are building their capability around grid connections and electrical infrastructure to support the delivery of large-scale EV charging hubs and power infrastructure projects across the UK. The Role We are looking for a Technical Director to lead grid connections and EV infrastructure strategy for a rapidly growing utilities contractor. This role will act as the technical authority within the organisation, leading the technical strategy across HV/LV electrical infrastructure, grid connections, and EV charging projects. Working closely with engineering, delivery, and business development teams, you will provide technical leadership across grid capacity assessments, points of connection, substations, transformers, and power distribution infrastructure, helping the business deliver complex infrastructure projects as it scales its presence within the EV and energy transition sector. Key Responsibilities • Lead DNO connection strategy and grid capacity assessments for EV and infrastructure projects, • Provide technical guidance on points of connection, substations, transformers, and switchgear, • Deliver technical leadership across HV and LV power distribution infrastructure, • Ensure compliance with industry regulations and engineering standards, • Utilise experience within ICP or RDNO frameworks to guide connection processes, • Support and mentor engineering and design teams, • Advise business development teams on technical feasibility of new opportunities, • Provide oversight on supply chain selection and technical risk management Ideal Background • Experience delivering HV/LV grid connections for EV, energy, or infrastructure projects, • Background working with DNOs, ICPs, IDNOs or grid connection frameworks, • Strong knowledge of substations, transformers, switchgear, and power distribution, • Experience leading or supporting engineering and design teams, • Electrical Engineering qualification and HV authorisation Who This Role Would Suit This role would suit someone currently working as a Head of Engineering, Technical Director, Grid Connections Manager, or Principal Electrical Engineer within an ICP, DNO, EV infrastructure provider, or energy contractor looking to take on a strategic technical leadership role. If this role is of interest, please apply directly. For any questions, please email

An opportunity has arisen for a Systems Engineer to join a leading defence organisation working on Military Satellite Communications (Milsatcom) at their base in Portsmouth, UK. You will be joining a team of Lead Systems Engineers and Architects. The Systems Engineer will provide the system architecture definition for the pending tender opportunities with the UK MOD (Skynet Enduring Capability) and other Milsatcom programmes - covering the space, control and ground segments. We see this as a great opportunity to be part of some diversified and future looking programmes. HOW YOU WILL CONTRIBUTE TO THE TEAM Requirements capture and definition from stakeholder needs through to sub-systems; ownership of traceability and verification. Verification Validation and Test (VV&T) support Ground System level architectural design definition and trade-offs Working with Engineering Leads and Partners to define the segment and associated sub-system architectures via integrated Working Groups Technical proposal inputs Solution Lead for customer and internal governance reviews Technical support to bidding teams Systems Engineering and project management inputs as required - to support planning, schedule and cost activities Inform stakeholders on progress and problem resolution SKILLS SOUGHT Proven ability in the design, integration and roll out of end-to-end digital telecommunications systems (milsatcom desirable) covering space, control and ground segments using Waterfall or Agile methodologies Proven ability of defining solutions within an Architectural Framework using Model Based Systems Engineering (MBSE) and appropriate tools (EA desirable) Engagement with customers and partners Working understanding of portfolios in terms of satellite platforms and payloads, satellite control, mission control, network control Robust presentation and writing skills TPBN1_UKTJ

Job Title : Commercial Gas Engineers Salary : £35k-£50k Dependent on Experience and Inclusive of On-Call & Overtime Location: Glasgow and Edinburgh Job Type: Full Time, Permanent HF Group is one of the UK's leading multi-discipline building services contractors, delivering high-quality solutions across Electrical, Mechanical, Fire & Security, Telecommunications, and Automated Controls. With a legacy spanning over 3 centuries and a family culture, we consider all of our employees as part of the family and invaluable assets to our ongoing business. Our head office is in Glasgow with offices in Edinburgh, Aberdeen, Manchester, and Belfast, providing services to clients across both public and private sectors throughout the UK. About The Role: Due to our continued growth, we currently have exciting opportunities for two experienced Commercial Gas Engineers, one for our Glasgow office and the other our Edinburgh office. The successful candidates will be responsible for but not limited to: Carrying out gas PPM schedules and completing associated paperwork Diagnosing faults and troubleshooting issues efficiently Ensuring full compliance with safety regulations and industry standards Delivering exceptional service while building and maintaining positive client relationships Key Skills, Qualifications and Experience Required: Demonstrable experience as a Commercial Gas Engineer, holding the following minimum qualifications: Commercial Core or equivalent changeover CIGA CORT ICPN TPCP1A (minimum) Catering qualifications (preferred but not essential) CSCS card (preferred but not essential) IPAF and PASMA (preferred but not essential) Hot Water Safety Systems (Unvented) Excellent problem-solving skills with strong attention to detail Commitment to delivering a high-quality service Willingness to work across multiple sites and engage professionally with clients Full UK Driving Licence A minimum of 3 years' experience is required due to the safety-critical and autonomous nature of the role. In Return We Offer: Competitive Salary Death in Service Scheme Private Medical Care Critical Illness Cover Training to extend gas Qualifications Scope Additional Information: HF Group is an equal opportunity employer, committed to fostering a diverse and inclusive workplace. Applications close on Friday, 27th February 2026 , if you have not heard from us within 4 weeks of the closing date, please assume your application has been unsuccessful on this occasion. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the experience or relevant job titles of; Gas Engineer, Heating Maintenance Engineer, Heating Engineer, Heating Installation Engineer, Services Engineer, Building Services Engineer, Installation Engineer, Commercial Gas Engineer, Smart Meter Engineer, Drainage engineer, Senior Gas Engineer, Lead Gas Engineer may also be considered for this role. TPBN1_UKTJ

Trainee Communications Engineer The Army - United Kingdom From £26,334 a year Create a battle-winning cyber capability. As a full-time soldier, entry-level Communications Engineer in the British Army, you’ll: · Learn how to protect our frontline communications systems from cyber warfare threats · Join one of three focused trades: Information Services, Networks, or Infrastructure · Configure, deploy, and maintain operational and tactical communication systems · Engineer radios, satellite systems and computer networks · Build voice and data telecommunications networks · Earn an apprenticeship in Network Engineering or Cable Installing To qualify, you must be between 16 years 6 months and 35 years 6 months, pass a basic fitness test, and have a grade C in GCSE Maths and grade D in GCSE English (or equivalent). Set yourself up for life. During your initial training, you’ll earn £26,334. If you set your mind to it, you could reach Corporal within 5 years, earning £37,861. You’ll also receive 30 days’ annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training ...

Security Systems Design Engineer Location: Woolwich, London (4–5 days office-based) Overview: We are seeking a Security Systems Design Engineer to join a leading telecommunications contractor delivering projects across the rail sector. This role focuses on the design of integrated security

NRSWA Site Supervisor Telecommunications, Utilities £35,000 to £45,000 plus van plus fuel card plus pension Depot at Bathgate EH48 2FH Depot at Bellshill Industrial Estate, ML4 3NP Job Ref: 790740 We are currently recruiting for a NRSWA Site Supervisor to support the planning, co-ordination and delivery of operational works across our telecoms contracts. This role is ideal for someone highly organised, confident communicating with multiple teams, and experienced in supervision of multiple teams doing work in the highway, footpaths and on arable land. You will be qualified as a NRSWA Supervisor, have a SSSTS ticket and have supervised on fibre contracts. Key Responsibilities ??Plan and schedule jobs, ensuring resources and materials are available ??Ensure work orders, job packs and documentation are accurate and completed on time ?*?Support permit applications and compliance paperwork ? What We're Looking For ??Strong attention to detail and ability to manage multiple tasks ??Good IT skills (Microsoft Office and job management systems) ?*?Understanding of street works and permits (NRSWA) *? Ensuring Risk Assessments and Method Statements are adhered to *?Monitoring signing, lighting, and guarding *?Monitoring excavation in the highway *?Monitoring reinstatement of sub-base and road-base in non-bituminous materials *? Making sure everybody goes home safely every day You will have - NRSWA Supervisor - SSSTS (Site Supervision Safety Training Scheme) - Full UK Driving Licence and be prepared to travel throughout Scotland for work - 2 years minimum in Telecoms Supervision (mainly in Fibre) Would suit a Civils Site Supervisor, Junior Project Engineer, Project Supervisor, or a Civils Technician To apply, please contact Gareth Bone We also have have roles available for professional Groundworkers, Electricians, Fitters, Wirepeople, Supervisors, Machine Drivers, Authorised Persons, Competent Persons, Site Engineers, Site Managers, Site Agents, Project Managers, Commissioning Engineers, Senior Authorised Persons, Operations Managers, Maintenance Engineers, Commercial, Estimators, HSQE and many more --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website. TPBN1_UKTJ

Our client Scottish Power Transmissions are seeking a Senior P&C Design Engineer for an ongoing contract role based in Blantyre, near Glasgow, although operating hybrid. Job Purpose Statement Develop and deliver Protection and Control engineering solutions for transmission networks (132kV and above) providing necessary basic and detailed engineering specifications and designs, innovation, effective technical support, advice and input throughout the lifecycle of projects. Accountability Statement • Define protection and control and ancillary apparatus requirements for input to System Construction Authorisation (SCA), Project Technical Specifications and BETTA documentation and advise on construction and outage programmes where required in relation to Control & Protection. • Prepare basic and detailed engineering specifications and designs for Networks and Plant Protection Systems, Network Automation and Substation Control Systems, Telecommunication Networks and Metering. • Provide technical assessment of tender submissions, preparation/review of Control & Protection design drawings and specifications. • Ensure Networks and Plant Protection Systems, Network Automation and Substation Control Systems and Telecommunication Networks are in accordance with current legislation, policies and operational requirements. • Provide technical support to the Project team on matters concerning the design, construction and operation of control and protection systems and lead the technical resolution of site/ construction Control & Protection issues. • Preparation of engineering documentation following quality processes to meet deliverables for PQP's and BETTA. • Perform all duties with a strong emphasis on health, safety, quality and environment compliance and continuous improvement and liaise across multi disciplinary engineering teams to provide end to end integrated solutions. • Contribute to training needs assessment for new products or similar and the development and delivery of technical, operational and safety packages for such products. Dimensions • Geographical Area – be part of a team with team members located in one or more offices in Scotland & Manweb. • The roles will be fluid in that location in the organogram will rotate between the design function and the delivery function depending on design status • Able to travel independently to effectively support project site and factory activities Skills, Knowledge & Experience • Degree in an Engineering discipline with relevant experience. • Chartered Engineer Status (or working towards). • Good inter-personal and communication skills and the ability to form effective working relationships with other individuals, departments and businesses. • Ability to implement, apply and promote CDM and Health & Safety best practice in a design environment. • Having the ability to investigate and understand technical characteristics of substation plant and associated equipment. • An understanding in terms of the plant and equipment deployed for transmission networks and how it is operated / maintained. • Proven experience in a responsible position and knowledge in one or more of the following areas at voltages from 33kV to 400kV: • Protection • Substation and Network Control • Automation • Telecommunications • Metering TPBN1_UKTJ

Info about the company An innovative and industry-leading organisation specialising in the development of high-end navigation and positioning systems for the Autonomous vehicles, Aerospace Drones, Geo Mapping and Robotics sectors. Info about what the x2 Support Engineer role entails X 2 brand new Support Engineer/ Test & Diagnosis Engineer roles as our client splits their Customer Support and a Test/QA team into 2 functions and creates a new support team, focused on the UK, Europe and Latin America markets. You will be happy to travel globally (all expenses paid), with a can-do approach and a desire to provide an excellent customer experience. Essential Requirements for the x2 Senior Support Engineer / Test & Diagnosis Engineer roles Technical degree in engineering or equivalent experience (Electronics, Electrical, Telecommunications or Mathematics would also be good). Experience with technical troubleshooting & fault diagnostics for complex hardware/software/electronics. A methodical fault-finding approach Technical support / fault finding experience within products in industry sectors such as Autonomous vehicles, Aerospace (Drones), Telecoms (antenna, aerials etc), Surveying or Robotics Able to work in a customer facing environment - working under pressure, liaising with internal and external stakeholders. Happy to travel within the UK, Europe and Latin America sometimes at short notice Desirable Requirements for the x2 Senior Support Engineer / Test & Diagnosis roles GNSS / Tracking & Monitoring / Georeferencing / Precision Control / Positioning / Localisation / MEMS / Inertial navigation / LIDAR / Sensor fusion type product experience. Experience working with automotive test houses. Experience working with different cultures across Asia, Latin America, Europe etc would be helpful but not essential. Benefits Holiday entitlement - 27 days + bank holidays Pension 5% employer contributions Group Income Protection Insurance Scheme Death In Service Scheme Electric Vehicle Scheme Wellness initiatives + others If you feel you are suitable and interested in this role, APPLY NOW with an up to date CV. We also pay referral fees if you can suggest another suitable person that isnt already known to us. April Quest Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003. We take your privacy seriously; our Privacy Policy can be viewed on our website. TPBN1_UKTJ

A Field Service Engineer is sought to join a specialist fleet technology business in Manchester, Greater Manchester, supporting the delivery of field service operations across customer sites by carrying out reactive repairs, planned preventative maintenance, audits, and installation work on vehicle-based technology and associated equipment. The Field Service Engineer, Manchester, Greater Manchester, will be expected to develop your understanding in the field, learning from senior engineers and the wider Field Service team in technical areas, service processes and best practice. This may include fault diagnostics, installation work, maintenance procedures, reporting systems, and safe working practices across customer sites and vehicle-based technology environments. Responsibilities include: Attend customer sites to complete reactive service calls and planned maintenance tasks as scheduled by the Customer Support Team. Assist with installation and upgrade works in collaboration with the Projects Team when required. Diagnose faults, identify solutions, and carry out repairs to restore equipment to full working order. Accurately record all service, maintenance, and installation activities using company systems and reporting processes. Ensure all work is completed safely, efficiently, and in line with company and customer standards. Follow the company returns process by correctly handling, documenting, and returning faulty or removed parts. Build and maintain positive working relationships with customers, acting as a professional representative of the business. Support audits and inspections of installed equipment where required. Attend customer meetings or site visits with management when needed. Look after company equipment, tools, and vehicle, ensuring they are used responsibly and kept in good condition. Key skills & experience: Practical, hands-on technical experience (engineering, electrical, mechanical, IT hardware, telecommunications, or similar). Strong fault-finding and problem-solving skills. Ability to work independently and manage your own workload in the field. Strong communication and customer service skills. Full UK driving licence. Comfortable working at height where required. Willing and able to work permanent night shifts. Positive attitude, reliability, and a proactive approach to learning. How to apply: Apply now for the Field Service Engineer role in Manchester, Greater Manchester. Send your CV to or call Adam on 01582878821 TPBN1_UKTJ

Job Title: Systems Engineer (Installations) Location: Christchurch, onsite, contractual base. The role requires weekly travel to Greater London and Buckinghamshire. Candidates may be based in the Midlands, the South or the South East, provided they can meet the weekly travel requirements. Salary: Up to £49,100 (Depending on skill and experience) Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most. Youll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, theres no limit to where a career at BAE Systems could take you. What youll be doing: This role is a core systems engineering position, responsible for the full lifecycle of IT and Telecommunications solutions. You will lead the technical delivery from requirements analysis and costed solution design through integration, implementation and commissioning across both reference facilities and customer sites. A key part of the role is producing and maintaining high-quality engineering artefacts, including detailed design drawings, installation documentation and accurate As Fitted records, ensuring every system is built, configured and documented to engineering standards. You will also define and execute rigorous test schedules, managing entry and exit criteria, resource planning and performance validation to ensure system readiness. Beyond deployment, you will oversee ongoing system maintenance, upgrades and continuous improvement activities. With ownership of work package delivery, youll ensure all engineering outputs, technical, operational and customer-facing are delivered to the agreed scope, quality and timelines. Core duties: Youll have proven experience designing, implementing and commissioning Information Technology and Telecommunications systems Youll hold a degree or equivalent qualification in a relevant Engineering subject Youll have an understanding and practical application of the Defence Information & Communication Technology (ICT) Standard Youll have an understanding and practical application of BS 7671:2018 Requirements for Electrical Installations Youll have an understanding of the application of Electromagnetic Security (TEMPEST) and its application to secure systems and installations is beneficial The Systems Team: This long-term appointment is a complement to the existing team of 45 specialists who provide support to a fully integrated command and control system for the MoD. This exciting systems and software programme spans multiple disciplines, including design, development, installation, implementation, integration, acceptance, training and logistics support. The programme is delivered entirely from our Christchurch site, supporting our customer across various MoD locations. Why BAE Systems? Here youll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. Youll be recognised for your contribution and enjoy rewards tailored to whats most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: Were committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 24th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. #LI-TP1 #LI-Onsite TPBN1_UKTJ

Candidates with the experience or relevant job titles of; Communications Engineer, Telecoms Support, 2nd Line Support, VoIP Engineer, IT Network Engineer, VoIP, Network Administrator and Telecommunications Support Technician may also be considered for this role. We enjoy a collaborative, fast-paced

Candidates with the experience or relevant job titles of; Telecoms Service Desk Technician, Comms Support, 2nd Line Support, 2nd Line Helpdesk Engineer, Technical Support, Helpdesk Support Technician, Fault Desk, Telecoms Service Desk and Telecommunications Support Technician will also be considered

Communications, you will collaborate with the internal communications design team to undertake a variety of design activities related to data networks, communication systems and associated equipment for submarine platforms. Communications, Electrical, Telecommunications, Electronic or Audio Engineer

A prominent media and telecommunications company is seeking a Senior Software Engineer focused on AI Operations in London.This hands-on role involves full-stack software development, working with Golang and Python to build and maintain systems that enhance alert ingestion and automation.The position

A leading media and telecommunications company in North Hillingdon seeks a skilled Software Engineer to design and implement scalable APIs primarily in Scala.You'll take ownership of services from development to production while optimizing performance in cloud environments.Ideal candidates are exper

A leading telecommunications company is seeking an Infrastructure Engineer in the City of Westminster.In this role, you will provide architectural direction for monitoring technologies, engage with operational teams, and ensure compliance with security standards.Competitive salary, benefits includin

A leading telecommunications company in the UK is seeking an Electrical / Mechanical Engineer to join their team in Kingston upon Thames.The role offers a salary of £43,573 along with overtime, on-call allowances, and a comprehensive benefits package including training, tools, and a work vehicle.Id

Ready to accelerate your technical career in a fast-moving, client-focused environment?.Backed by one of London’s most ambitious fibre infrastructure initiatives, this team is part of a company delivering full end-to-end connectivity services from design to support at scale.Known for its ultra-fas

A leading data center solutions firm in London is seeking a Data Centre Engineer to join their permanent team. A strong background in datacenter or telecommunications is essential, along with skills in electrical wiring and fiber installations.

We are looking for a highly skilled and motivated Senior Telecommunications Engineer to join our technical team, providing advanced support for our data center and telecom infrastructure services. Minimum 5 years of experience in telecommunications or network engineering. This position is ideal for

Role: Analytics Engineer Location: London / Birmingham / Bristol - Any location (Hybrid 3 days onsite, 2 days remote) Duration: 6 Months Day rate: £450 - £600 Inside IR35 Role Overview We are seeking an experienced Analytics Engineer to design and build scalable analytical data models that support business intelligence, reporting and commercial analytics. The role sits within a multidisciplinary data team responsible for delivering trusted analytical data products used across commercial and marketing teams. The ideal candidate will combine strong analytical thinking with advanced SQL engineering capability, and will have experience designing analytics-ready datasets used by BI tools or semantic layers. This is not a pipeline engineering role; we are looking for someone experienced in building analytical data models that define consistent business metrics and enable self-service analytics. Key Responsibilities Analytical Data Modelling * Design and implement scalable analytical data models in SQL used by BI tools and analytics platforms. * Build datasets that support consistent business metrics, reporting and analysis. * Implement modelling approaches such as star schemas, denormalised analytical tables and reusable metric layers. Data Analysis & Profiling * Profile complex datasets to understand data structure, quality and business meaning. * Investigate and interpret source data to inform robust analytical modelling decisions. * Translate business questions into well-structured analytical datasets. SQL Engineering * Develop robust SQL transformations to convert raw source data into trusted analytical assets. * Ensure analytical models are scalable, performant and maintainable within a cloud data warehouse. * Optimise SQL logic for performance and efficient data processing. Collaboration * Work closely with analysts, visualisation developers, data engineers and business stakeholders. * Contribute to the development of reusable data assets and consistent analytical definitions. * Support the evolution of the organisation's analytics data layer and self-service reporting capability. Essential Skills * Advanced SQL skills with experience engineering complex analytical transformations. * Proven experience building analytical data models used by BI tools or reporting platforms. * Experience designing analytics-ready datasets rather than ingestion pipelines. * Strong experience with cloud data warehouse platforms (preferably Google BigQuery / GCP). * Strong data analysis and data profiling capability with the ability to interpret complex datasets. * Experience implementing analytical modelling approaches such as star schemas or wide tables. Desirable Skills * Experience working with semantic layers or metrics layers (e.g. Looker / LookML). * Experience designing consistent business metrics used across reporting and analytics. * Python experience for data analysis, automation or advanced analytics workflows. * Exposure to AI-enabled analytics tools or modern data workflows. * Experience working in commercial or marketing analytics environments. * Telecommunications or subscription business experience would be advantageous. Candidate Profile * Strong analytical mindset combined with engineering discipline. * Comfortable working with complex business data and translating it into analytical structures. * Experienced in building analytics-ready datasets used by BI tools and reporting platforms. * Collaborative and comfortable working within cross-functional data teams

About Us Join our dynamic and growing organisation in North West London, where we are redefining the Data Centre and Critical Engineering sector. We foster a positive culture that values downtime, continuous training, and professional development for our engineering staff. If you’re looking for an employer that champions innovation and personal growth, your search ends here! Our client specialises in the design, construction, and operation of 'White Label' data centres for global clients, primarily serving IT service providers, telecommunications companies, and financial services organisations. As a privately-owned company, we are united by shared values of fairness, integrity, quality of service, and a commitment to global best practices. Job Overview As a Data Centre Shift Leader / Shift Engineer, you will play a pivotal role in ensuring the uptime, availability, and reliability of our data centre operations. You will oversee maintenance activities, ensuring they meet or exceed defined SLAs and comply with company policies and procedures. Main Responsibilities Operate and maintain electrical, mechanical, and HVAC systems under a strict change management system to achieve 100% uptime. Monitor and troubleshoot site and plant equipment support systems, handling incidents, problems, changes, escalation, and resolution. Manage mechanical and electrical plant and systems, including HVAC, generators, UPS, fire alarms, suppression systems, low and high voltage switching, water systems, and associated equipment. Utilise operational systems including BMS, PMS, and CMS to monitor and control site performance. Coordinate sub-contracted resources as needed to deliver safe, high-quality service. Manage and coordinate all Planned Preventative Maintenance (PPM) activities according to schedule. Requirements Engineering Apprenticeship or equivalent X Forces Engineering Qualification and experience High-Pressure Precision Engineering experience HND in electrical or mechanical engineering or equivalent (desirable) Background in a Critical Environment / Data Centre (desirable) Professional electrical or mechanical certification (National Craft Certificate, Registered Electrical/Mechanical Contractor, or equivalent) Experience in troubleshooting and repairing low & medium voltage electrical systems Experience in mechanical/HVAC systems troubleshooting and repair Knowledge and ability to apply safe electrical practices according to guidelines and regulations Candidate Attributes Strong troubleshooting and problem-solving skills, including Root Cause Analysis (RCA) Detailed understanding of Change Management processes and procedures Ability to follow procedures, system documentation, and track issues via a Service Desk Ticketing system Good judgment and decision-making instincts Ability to collaborate with support teams to resolve complex issues Knowledge of BMS systems and a solid understanding of PPM/CAFM systems

An exciting opportunity has become available for an experienced Mobile Electrical M&E Engineer to join a leading facilities management provider, supporting a flagship telecommunications account across the Greater London region. This hybrid mobile role offers a fantastic opportunity for an engineer seeking improved work-life balance while maintaining exposure to critical and technically engaging environments. The Role Covering sites across North East London/Essex borders, South London and Kent borders, you will take responsibility for delivering high-quality M&E services across fixed-line telecommunications sites. You will manage your own diary, providing flexibility and autonomy in your day-to-day work. Key Responsibilities Carry out routine PPM, planned maintenance and reactive tasks in line with scheduled requirements. Undertake electrical installation works as required. Support the delivery of operational strategies to ensure compliance across critical services. Maintain and service systems including: UPS systems Battery systems Generators Data centre infrastructure Switchgear systems Complete general building maintenance and soft service support where required. Ensure all work is delivered to the highest Health & Safety and statutory compliance standards. Accurately complete documentation and reports in a timely manner. Participate in the on-call rota. Work collaboratively with other mobile engineers and provide basic site supervision where necessary. ✅ Essential Requirements City & Guilds Level 3 Electrical Qualification (or equivalent). Full UK Driving Licence. Experience working within a commercial or critical environment. Strong understanding of planned and reactive maintenance processes. ⭐ Desirable City & Guilds 2391 - Electrical Inspection & Testing. Experience or exposure to data centre environments. RG Setsquare is acting as an Employment Agency in relation to this vacancy

Field Service Engineers ATM /Breakfix We are excited to offer an opportunity for skilled engineers to join us on a flexible pay-per-hour basis, supporting ATM First Line Maintenance (FLM) activity. The role is inside the IR35 What we’re looking for * You must live within one of the following post codes: NW, W, HA, TW or to the western side of NW. * Passing a Pre Employment Screening Level 4 is essential * Though previous ATM experience is desirable, a background working as a Field Engineer in the Telecoms or with White Goods (Washing Machines, Dishwashers etc.) would also be desirable, but you must have at least a year’s experience working ‘out in the field’. * Flexibility to work within our operational window of Monday to Sunday, 08:00–22:00. * Availability for 8.5–9 hour shifts (including a 30-minute unpaid break), 5 days over 7. * You must have your own vehicle and a full UK driving licence. * Own an Android smartphone * Supply your own hand tools * Skills and Experience Required * Strong background in electromechanical or IT field service engineering. * Ability to work with networked devices, routers, and cabling. * Competence in the installation, deinstallation, and commissioning of ATMs or similar equipment. * Excellent diagnostic and fault-finding skills, with the ability to resolve issues quickly under pressure. * Knowledge of basic PC hardware, software loading, and configuration. * Comfortable using hand tools, testing equipment, and diagnostic software. * Strong customer service and communication skills, representing the company professionally on-site. * Ability to work independently, managing time and priorities effectively. * Willingness to travel locally within your allocated region. Desirable Skills * Prior experience with ATM installation, servicing, or first-line maintenance. * Familiarity with ATM manufacturer NCR is an advantage * Experience working in a regulated industry (financial services, security, or telecommunications). * Ability to deliver basic user training or guidance to clients after installation. What we offer A flexible pay-per-hour model. Full training for candidates without prior ATM experience. A chance to be part of a supportive and professional engineering team. Rate of Pay: £17.00 per hour Rate to Engineer if no calls/low hours £50 If Engineer works, the pay would be £17 per hr those hours are offset against the £50 until exceeded. Mileage is charged as below: 0 - 50 miles free 50 - 100 miles charged at @ 22p per mile 100+ miles charged at @ 45p per mile An additional £10 completion bonus will be paid once the job has been successfully completed and closed down requiring no further visits

My client has an excellent opportunity for a data centre engineer to join their team on a permanent basis. The company are looking for somebody who is keen to learn develop and progress within the organisation. This role will be responsible for repairs, physical installations as well as for the escorts requested by customers. You will be handling all incoming customer service requests and ensuring SLA's and agreed KPIs are achieved to ensure outstanding customer satisfaction. The role will ensure 24/7 support in the data centre operations and representing the local facility team during out of business hours and acting as first level support. They are looking for somebody who has a vast amount of experience within a relevant field (datacenter, telecommunications, IT or electrical) with experience with electrical wiring, networks, optical fiber installations and dark fiber who is happy to work independently, show initiative and proactivity on site. Based in Hayes Upto £58,000 + bonus Continental Shift Permanent No callout Good Pension Scheme Overtime available at 1.5x Cycle to work scheme Ill health cover Opportunity to progress within the companyTo avoid missing out on this excellent opportunity please apply online, or for further information please contact Tarik Bell-Ross on (url removed) RG Setsquare is acting as an Employment Agency in relation to this vacancy