Trabajos test technician en LeedsCrear alertas

GENERAL DESCRIPTION The role will primarily be based at the O&M Centre located in Buckie or Fraserburgh but will also require frequent travel to the offshore assets via Crew Transfer Vessel, and Service Operation Vessel. The Operations & Maintenance Technicians are responsible for providing support in the implementation of the operations and maintenance strategy for Moray West Offshore Wind Farm. The Technicians will work closely with the Site O&M Manager, Operations & Maintenance Supervisors, and Maintenance Planner. The Operations and Maintenance Technicians are responsible for the on-site performance of O&M activities relating to civil and structural infrastructure (both onshore and offshore), Balance of plant electrical equipment, foundations / transition pieces, quayside facilities, and OFTO assets as required. SPECIFIC RESPONSIBILITIES: • Responsible for the supervision of contractors (as required)., • Supporting routine asset inspection activities., • Responsible for the close out of snagging items., • Responsible for the performance of interim, preventative, predictive and corrective maintenance activities as defined., • Perform servicing, troubleshooting and repair of minor mechanical and electrical components., • Repair of paint and/or coating systems., • General cleaning of boat landings and substructures., • Prepare, pack and transportation of tools and equipment for maintenance activities., • Management and use of tools, test equipment and personal protective equipment., • Responsible for the prompt reporting and investigation of defects, and under performance., • Supporting subcontractors in the execution of scopes of inspection and maintenance activity., • Provision of client oversight on all WTG main component and other major repair activity carried out by all subcontractors on behalf of Ocean Winds., • Daily reporting on Operational Status using software systems., • Responsible for the authoring and regular update of Method Statements and Risk Assessments for operational activities., • Use of operations management systems and planning tools. REQUIRED ACADEMIC SKILLS: • Have completed a full apprenticeship in mechanical, electrical or control instrumentation engineering discipline and formal qualifications such as BTEC or HNC would be advantageous, but not essential., • Evidence of extensive relevant industry specific technical training., • All current offshore GWO certification (Preferable)., • IRATA Level II/III (Preferable)., • IOSH Managing Safely(Preferable). REQUIRED PROFESSIONAL EXPERIENCE: • Experience in an O&M environment within the offshore wind, Oil and Gas, marine or factory processing industries (preferably 3 to 5 years)., • Meet the physical and medical requirements for working offshore, can work at heights and in restricted or confined spaces and also not be prone to suffering from sea sickness, • Experienced in troubleshooting on mechanical and electrical components., • Experience of installation and/or commissioning of offshore assets., • Offshore or WTG experience at technician level within a Turbine OEM (Preferable)., • Experience of Electro Mechanical safety rules systems and WTG safety rules (preferably with experience as an authorized person)., • A good understanding of lifting activities using mobile plant and cranes. REQUIRED KNOWLEDGE: • Good knowledge of electrical and mechanical maintenance., • Knowledge of LOLER and PUWER regulations., • Good knowledge of Microsoft Office Applications (Preferable)., • Knowledge of Electro Mechanical or WTG Safety Rules would be an advantage. OTHER: • Fluent English both verbal and written., • Strong interpersonal skills., • Good communication skills., • Hands on, practical aptitude in relation to maintenance activities., • A team player and calm problem solver, self-motivated and able to work independently., • Technical Reporting., • Organized and methodical approach to problem solving., • Full driving license., • Be based/ or willing to be located close to the Buckie/Fraserburgh area, ideally within 30 mins drive. The working pattern will be a rota system which is anticipated to be 2 weeks on/ 2 weeks off rota, 12 hours per day (weather permitting). O&M Technicians will provide out of hours on-call support, as part of an emergency response rota or work weekends (when required). Competitive salary and employee benefits including bonus scheme, employer pension contribution and health & Life insurance. EQUAL OPPORTUNITY STATEMENT At Ocean Winds, we celebrate all the differences that make individuals unique. We are building a diverse energy workforce, where differences in every form (culture, background, ability, or lived experience) are valued by all, bringing greater perspectives, ideas, and knowledge. You might not meet every single requirement listed. But, if this role speaks to you, we encourage you to apply. Potential and passion can be just as important as any other requirement. We are proud to be a diverse and inclusive team where everyone is welcome, and we’re committed to making our hiring process as open and supportive as possible. If you need any adjustments or accommodations during the process, please don’t hesitate to let us know. We’ll do everything to help. Please feel free to reach out to us at for the same. By selecting “Apply” above, you indicate: You have read and acknowledge OW Candidates Privacy Notice: .

Job description: Are you an experienced and self-motivated Field Service Engineer? Do you put the customer at the heart of everything you do and have a true passion to provide a second to none customer experience? Then C&M Scientific– part of Scientific Laboratory Supplies (SLS) is the right fit for you. Join us and contribute to our mission of being the UK's largest independent supplier and service provider of laboratory equipment. Job Summary: This is a full-time field-based role, supporting customers across Central Scotland and surrounding areas. You will be on the road 5 days per week, with occasional overnight stays required. Being an experienced Instrument calibration/validation technician and based from home, you will travel to your customer appointments, delivering excellent customer service at all times. You will be tasked with the Validation, re-qualification and calibration of laboratory equipment in universities, hospitals, and other laboratory environments. You will work closely with your fellow Field Engineers, supporting them with projects and maintaining great communication with the service administration team based in Livingston. We will supply you with the tools and test equipment you require as well as a company vehicle in order to fulfil your role to the very highest standard. Previous experience working within a similar industry would be beneficial, although full training will be provided. The Ideal Candidate • Relevant qualifications or equivalent experience., • Be able to Coordinate your own work schedule with a proactive approach and in a highly organised manner., • Ability to trouble shoot analytically and problem-solve., • Excellent verbal, written and communication skills., • Assuring the highest level of Customer Experience to achieve customer satisfaction and loyalty., • Producing and supplying timely and accurate reports of your activities to the customer and administration team: e.g. electronic service/calibration reports and expense submissions., • A strong team player, working remotely with the ability to connect with colleagues and management., • Self-motivated, and ability to work under pressure. As part of the SLS Group and a leader of onsite engineering support for laboratory equipment, C&M Scientific Ltd work with scientists and laboratory professionals, helping them stay productive and aligned to regulatory accreditation standards. Our multi-disciplinary service and product range, combined with highly trained and experienced service/calibration engineers, administration, and Management teams, C&M Scientific Ltd are able to provide a one stop shop, from the supply of new laboratory equipment to installation, validation, calibration, ongoing maintenance and repairs. Alongside our commitment to your professional and personal development, we also offer a generous benefits package including: • Competitive salary plus overtime, • Company Vehicle, mobile phone and tablet, • 25 days annual leave plus Bank Holidays, • Company pension, • Private medical care scheme, • Enhanced Maternity and Paternity leave, • Small, friendly, and sociable team environment, • Company profit bonus schemes, • Career opportunities for development and progression

Commissioning Technician e-STORAGE is a subsidiary of Canadian Solar and a leading company specializing in the design, manufacturing, and integration of battery energy storage systems for utility-scale applications. The Company offers its own proprietary LFP battery solution, comprehensive EPC services, and innovative solutions aimed at improving grid operations, integrating clean energy, and contributing to a sustainable future. e-STORAGE has successfully implemented over 3.3 GWh DC of battery energy storage solutions in various locations, including the United States, Canada, the United Kingdom, and China. This significant accomplishment solidifies e-STORAGE's position as a key player in the global energy storage integration industry. Currently, the Company operates two fully automated, state-of-the-art manufacturing facilities with an annual production capacity of approaching 20 GWh. e-STORAGE is fully equipped to continue providing high-quality, scalable energy storage solutions and contribute to the widespread adoption of clean energy. For additional information about e-STORAGE, visit Canadian Solar was founded in 2001 in Canada and has been listed on NASDAQ since 2006. It is now one of the world's largest solar technology and renewable energy companies. Canadian Solar is a leading manufacturer of solar photovoltaic modules, provider of solar energy and battery storage solutions, and developer of utility-scale solar power and battery storage projects with a geographically diversified pipeline in various stages of development. Over the past 22 years, Canadian Solar has successfully delivered over 102 GW of premium-quality, solar photovoltaic modules to customers across the world. Likewise, since entering the project development business in 2010, Canadian Solar has developed, built, and connected over 9 GWp of solar power projects and over 3 GWh of battery storage projects across the world. Currently, the Company has approximately 700 MWp of solar power projects in operation, 8 GWp of projects under construction or in backlog (late-stage), and an additional 17 GWp of projects in advanced and early-stage pipeline. In addition, the Company has a total battery storage project development pipeline of 52 GWh, including approximately 2 GWh under construction or in backlog, and an additional 50 GWh at advanced and early-stage development. Canadian Solar is one of the most bankable companies in the solar and renewable energy industry. For additional information about Canadian Solar, visit Position Title: Commissioning Technician Department: Commissioning Entity: CS e-STORAGE UK Reports To: Commissioning Manager UK Location: Scotland- 100% travel to work site. Position Summary: The commissioning technician will be an integral part of the commissioning team, with their main responsibility being to work with and support the commissioning engineer and their manager in the commissioning of BESS sites. The successful candidate must be able and willing to travel and complete tasks at various project sites throughout the country and, on occasion, internationally. Experience with BESS or renewable power generation equipment in a commissioning or service environment is required. Responsibilities: • Commission BESS sites which use CSI Energy Storage’s Solbank Storage Power Block as part of a commissioning team., • Perform tasks assigned by the commissioning manager and engineer, such as safety system checks, installation inspection, and functional tests., • Perform daily routine tasks such as executing commissioning checklists, reviewing, and updating the issues list and helping to monitor the performance of commissioned assets., • Support the commissioning of the overall control system by testing the network connectivity of all field devices and performing point-to-point tests., • Provide on-site diagnostic, troubleshooting and hands-on support., • Supervise subcontractors on-site where required. • Assist in developing standard operating procedures from lessons learned on-site., • Assist with the completion of testing documentation and preparation of test reports in a timely manner., • Assist with the identification and compilation of spare parts inventories., • Ensure proper LOTO and switching procedures are observed as required., • Support client and operation and maintenance contractor training during and after commissioning., • Adhere to all health and safety rules and policies., • Attending and occasionally leading Plan of Day (POD) meetings., • Review vendor commissioning documentation for completeness and accuracy., • Maintain deficiencies punch list for each vendor and track completion of various., • Work with the commissioning engineer to ensure post-handover site performance is optimised. Required Qualifications and Skills: • Qualified Electro-mechanical Technician., • Minimum 5 years’ relevant work experience in an installation or service environment preferably in renewable energy or power generation, • Previous training in, or knowledge of inverters highly desired., • SCADA experience will be beneficial., • Comfortable working in a team or alone, with good communications skills, • Good practical problem-solving skills. Compensation & Benefits Canadian Solar offers a competitive salary plus fully comprehensive benefits and performance bonus package based on an annual objective achievement. Our generous benefits package includes a Pension, generous vacation days, medical/dental/life/vision insurance program. Canadian Solar Inc. is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status.

FIELD SERVICE ENGINEER - PERMANENT POSITION We are currently recruiting for a hands-on Field Service Engineer to support the deployment, maintenance, and optimization of an advanced vision-based Real-Time Location System (RTLS) across customer sites throughout the UK logistics sector. This customer-facing role combines installation, commissioning, fault finding, and ongoing technical support for cutting-edge AI-powered camera systems designed to improve operational safety and productivity in industrial environments. As a Field Service Engineer, you will work directly on customer sites, carrying out equipment installation, system configuration, diagnostics, preventative maintenance, and troubleshooting activities. You will act as a key technical contact for customers, ensuring systems operate reliably while delivering a high standard of service and support. The role offers exposure to advanced technologies including computer vision, AI-driven tracking systems, industrial networking, and safety solutions. You will work closely with internal engineering, product, and commercial teams, providing valuable field feedback to support continuous product improvement. This is a varied and highly practical role involving regular UK travel, customer interaction, and opportunities for long-term technical development as the business continues to grow. Key Responsibilities: • Install, configure, test, and commission RTLS hardware and software systems at customer locations., • Carry out on-site fault finding, diagnostics, and repairs to ensure maximum system uptime., • Provide first-line and second-line technical support to customers both remotely and on-site., • Perform preventative maintenance, system health checks, and performance optimisation activities., • Support customer training and handovers following installation and commissioning., • Work closely with customers to resolve technical issues quickly and professionally., • Assist with system upgrades, software updates, and configuration changes., • Complete service reports, installation documentation, and technical records accurately., • Support technical demonstrations and occasional trade show or customer event activities., • Collaborate with engineering and product teams to escalate recurring issues and provide field feedback., • Ensure all work is completed in line with health & safety and site compliance requirements., • Travel regularly across the UK to support customer sites as required. Skills & Qualifications: • 2+ years of experience in a Field Service Engineer, Service Technician, Installation Engineer, or similar technical role., • Degree, HNC/HND, apprenticeship, or equivalent qualification in Engineering, Electronics, Electrical Engineering, Mechatronics, or a related discipline., • Strong hands-on electrical, electronic, or electro-mechanical troubleshooting skills., • Experience working with industrial systems, CCTV/camera systems, networking, automation, or related technologies would be advantageous., • Interest in technologies such as computer vision, AI systems, RF technologies, and industrial safety applications., • Ability to diagnose and resolve technical faults independently in customer-facing environments., • Strong organisational and time-management skills with the ability to manage multiple service activities., • Comfortable working independently and travelling regularly to customer sites., • Excellent communication and customer service skills., • Good working knowledge of IT systems and networking principles., • Experience with Linux and Python would be beneficial but not essential., • Full UK driving licence and willingness to travel extensively across the UK., • Fluent in English, both written and spoken. The Offer: • A permanent, full-time employment contract, • A salary & benefits package commensurate with experience Please send over your CV to or call me on +32 (0) 3 318 00 74. As always, we are open to recommendations, so please feel free to pass this on to other suitable candidates.

FuzeHR is now hiring a Service Technician/Service Engineer based in the UK! This is an exciting opportunity to join a highly successful business in the mining/mineral processing equipment space. The successful Service Engineer will provide post sales service, commissioning, and client support for company supplied equipment in domestic and international locations. No need to report into an office or shop daily, this is a fully remote opportunity involving work on customer sites & from home. Apply today! What are the Perks? • Competitive compensation (dependent on experience and qualifications)!, • M-F, day shift schedule with minimal requirement to work evening or weekends, • Work from home while not servicing customer equipment! What are the Responsibilities? • Post-sales support, including client follow-up and training, • Identify issues in the field and resolve them; look for areas of improvement; bring forward ideas or solutions, • Write service reports and commissioning checklists upon trip completion, • Create procedures, instructions, reports, training information which may include manuals, PowerPoint, and videos, • Act as a content expert for Technical Writing department; support their development of manuals, procedures and documentation, • Follow-up on action items identified during commissioning or service trips, • Assist with Falcon SB bowl refurbishment program; generate reports for the Parts Team, help coordinate and support work processes, • Assist with larger projects including assembly, teardown and coordination; lead and direct a third party vendor to fabricate and assemble company equipment, • Assist with shop assembly when resources require it; this may be in Perth, Langley, Montreal, or at an international vendor, • Assist QA department with quality inspections, • Handle warranty claims; disposition and needed actions to see process to completion using new procedures, • Test company equipment after assembly; follow FAT (factory acceptance test) steps; bring forward any concerns and ensure corrections, • Assist with spare parts orders (packing, picking, communication with Langley, etc.); aid with annual inventory count; aid other company departments (Quality, Procurement, etc.) if local support is required What are the Requirements? • Good mechanical knowledge or mechanical aptitude; follows company and client safety protocols; best practices; follows procedures; ability to follow directions; continued growth and development, • Experience with equipment commissioning and service, • Experience with analysing and troubleshooting machinery both mechanically and electrically (Low Voltage), • Able to read, follow, and understand mechanical (assembly) and electrical drawings, • Clear communication with clients and peers on equipment installation, operation, maintenance, and repair, • Understand how to see a job through and adjust your schedule to suit the task at hand, • Demonstrates personal leadership; looks to develop and stays up to date with required training including but not limited to White Card, Senior first aid, HSR, electrical safety, mineral processing, automation, • Use and understand various Automation software; be able to clearly understand directions if being instructed on a program change, • Proficient in MS Word, Excel, PowerPoint and Adobe Acrobat or other PDF editors, • Able and willing to travel domestically and internationally on short notice and up to 50% of the time. Destinations may be underdeveloped, • Hold a valid Australian passport and maintain good standing, • When working onsite, able to match client hours which may require working 10-12 hour shifts, • Flexible with work/personal life balance to communicate with Langley head office at inconvenient times due to the time difference Bonus Points • Millwright (apprentice program), • Electrician (apprentice program), • Mineral Processing or mine experience, • Multiple languages Personal Attributes • Self-starter, proactive and motivated, • Ability to deliver under pressure or in uncomfortable conditions, • Dependable, trustworthy, accountable; owns mistakes and learns from them, • Works well both independently and with others in a team, • Able to accept and grow from constructive criticism, • Well organized and able to prioritize activities, • Confident in making decisions, some of which may not be well received; diplomatic approach to ensure work gets done, • Ability to recognize when to ask for help, • Flexible to work in a small/medium-sized business

Ink Technician Rotating 12 hour shift pattern Mon- Friday on days and nights 07:00 – 19:00 and 19:00 – 07:00 £14.37 to £15.73per hour depending on experience. Overview Aqumen Recruitment are proud to be recruiting on behalf of our manufacturing client for an experienced and reliable Ink Technician . This role is key to ensuring accurate colour production, smooth workflow on press, and the highest standards of quality and safety across the site. You will be responsible for preparing inks using GSE dispensing systems and X-Rite colour management tools , ensuring all products meet customer specifications and pass quality assurance checks. This is a hands-on, fast-paced role that requires accuracy, initiative, and a strong commitment to Health & Safety. Key Responsibilities Prepare inks using GSE dispenser and X-Rite colour management tools in line with production plans Use and manage press return inks Unload ink deliveries and store materials safely within the locked compound Maintain excellent housekeeping standards within the ink store Work independently and manage a physical workload effectively Troubleshoot ink-related issues on the printing press Deliver inks to press and return unused materials to the ink store Maintain the dispensing system and safely handle 200kg barrels and 20kg pails using appropriate equipment Health & Safety Responsibilities Follow all workplace safety protocols and procedures Identify and report potential hazards promptly Support accurate reporting of incidents, near-misses, and injuries Maintain a clean, hygienic, and safe working environment Skills, Attributes & Requirements Flexible and able to work to meet business needs Willingness to work overtime to cover holidays and sickness Able to work under pressure and meet deadlines Strong communication skills Excellent attention to detail and ability to follow procedures Computer literate Experience with GSE or equivalent systems (preferred) Must pass an Ishihara colour vision test A reasonable level of physical fitness (lifting, bending, handling materials) Consistent punctuality and professional conduct If you're a proactive individual with strong attention to detail and experience in ink preparation or colour management, we'd love to hear from you. Aqumen Recruitment is acting as an Employment Business in relation to this vacancy. TPBN1_UKTJ

Job Title: LEV Install and Service Engineer Location: Leeds, West Yorkshire Salary/Benefits: £25k - £50k DOE + Training & Benefits This expanding LEV company is seeking a reliable and productive LEV Install and Service Engineer based in West Yorkshire. Applicants will need to be qualified with BOHS P601 and have experience within the LEV industry. As you will diving in headfirst to emmissions testing, DOP testing and undertaking installation of LEV systems with providing technical advice to clients. This company can offer career development, training to further P certs, competitive salaries and brilliant packages for a hardworking LEV Install and Service Engineer. Applicants will be considered from: Wakefield, Barnsley, Huddersfield, Pontefract, Halifax, Keighley, Bradford, Garforth, Dewsbury, Castleford, Otley, Batley, Brighouse, Mirfield, Horbury, Pudsey, Rothwell, Featherstone Experience / Qualifications: - Obtained BOHS P601 or keen to learn - Advantageous to hold any BOHS P certs such as P600, P602 and P603 - Adaptable to travel as per company requirements - Proven experience working as an LEV Engineer - Great literacy, numeracy and IT skills - Strong work ethic - Following HSE guidelines The Role: - Keeping accurate pre and post service records with photos - Completing emissions testing - HEPA and DOP testing - Maintaining high levels of service with working to agreed deadlines - Servicing and maintenance on fume cupboards, laminar flows and safety cabinets - Offering technical advice and project updates to clients - Carrying out testing, installation and maintenance of LEV systems Alternative Job titles: LEV Install Engineer, LEV Test & Service Engineer, Project Engineer, Service Engineer, Clean Air LEV Engineer, LEV Service Engineer, Commissioning Engineer, Validation Engineer, Clean Air Technician, Cleanroom Technician, Critical Air Engineer. Future Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. Future Select Copyright 2026

PPM is currently looking for Mobile Electricians and Technicians/Testers in LEEDS and surrounding areas *Please note - the client has got plenty of work. There is plenty of weekends to go at and they get plenty of OOH call outs too. Job 1: PPM electrician (gold card, doesn't need 2391) Salary: £37.5k - £40K depending on experience. There will be the possibility of weekend bonuses which equate to £200 per shift and additional bonuses for call outs carried out of hours. This will be based door to door on a 47.5-hour contract. About the Role: We're looking for a fully qualified Mobile Maintenance / PPM Electrician to deliver planned and reactive maintenance across retail, industrial and commercial sites, ensuring compliance and safe day-to-day operations to NICEIC standards. Requirements: • Fully qualified Electrician (2365 with NVQ 3 or 236 Parts 1 & 2 or equivalent) with 17th or 18th Edition. Gold Card desirable., • Full UK driving licence (max 6 points)., • IT literate, able to use smartphone/tablet., • Able to carry and use steps/ladders for short-duration work at height. Job 2: PPM technician (gold card with 2391) Salary: £40k - £42.5K depending on experience. There will be the possibility of weekend bonuses which equate to £200 per shift and additional bonuses for call outs carried out of hours. This will be based door to door on a 47.5-hour contract. About the Role: Join our team as an experienced Electrical Testing / PPM & Remedial Electrician. You'll deliver compliance, planned maintenance and fixed wire testing (EICRs) to NICEIC standards, ensuring properties remain safe and compliant. Requirements: • Fully qualified Electrician (2365 with NVQ 3 or 236 Parts 1 & 2 or equivalent) with 17th or 18th Edition., • 2391 Inspection & Testing qualification (or equivalent)., • Full UK driving licence (max 6 points)., • PPM maintenance and fixed wire testing experience., • IT literate, confident with smartphone/tablet., • Able to carry and use steps/ladders for short-duration work at height. Key Duties for Both Roles: • Carry out compliance visits, remedial works, lighting maintenance., • Test emergency lighting and fire alarms., • Perform PAT testing and fire extinguisher servicing., • Support occasional small project work as needed. Personal Attributes for Both Roles: • Personable, professional, excellent communication., • Works independently and collaboratively., • High standards, strong quality control., • Proactive, flexible, confident., • Open to overtime, weekends, and staying away when needed (expenses paid)., • Positive, dynamic approach with focus on problem-solving. To Apply, please send your CV to (url removed) or call on (phone number removed)

Job Title: HGV Technician / HGV Mechanic / HGV Fitter Location: Leeds Salary: up to £60000 per annum Job Type: Permanent Our client, a well-established and reputable commercial vehicle workshop, is seeking a talented HGV Technician / HGV Mechanic / HGV Fitter to join their team. As an HGV Technician / HGV Mechanic / HGV Fitter, you will be responsible for: Ensure repairs are carried out according to manufacturer’s procedures and in a safe and responsible manner. Carry out general servicing and maintenance. Assist in the fault diagnosis process. Comply with warranty procedures during repairs and with warranty material on completion of a repair. Road test vehicle when required (if holder of HGV licence). Ensure that all vehicle defects are reported to your workshop controller. Complete relevant paperwork and documentation. To be successful in this role as an HGV Technician / HGV Mechanic / HGV Fitter, you should have: Previous experience as an HGV Technician / HGV Mechanic / HGV Fitter is essential. Must have own tools. Ideally have a formal qualification to NVQ level 3 as an HGV Technician / HGV Mechanic / HGV Fitter or equivalent Holt a full UK driving licence Class 1 or 2 licence desirable. Benefits: Enhanced Overtime Rates Increased holiday allowance, further increased with service. Manufacturer training Employee benefits package Supportive and collaborative work environment Career growth potential within a reputable company To apply for this HGV Technician / HGV Mechanic / HGV Fitter role, please submit your CV via this advert or contact John Barnes at Holt Recruitment

HGV Trailer/Tanker Technician Location: Leeds Pay: up to £21p/h Hours: Monday - Thursday 8am -4.30pm and Friday 8am -3.30pm Overtime paid at 1.5 About your new company My client is a large fleet maintenance company based in Leeds, due to their continued growth they are now looking for a skilled HGV Trailer/Tanker Technician to join their ever growing team About your new HGV Trailer/Tanker Technician role You will carry out maintenance, repairs and modification work on the fleet of HGV trailers, tankers and provide technical support from fault analysis through to competition. Assist in the fault diagnosis process. Comply with warranty procedures during repairs and with warranty material on completion of a repair. Road test vehicle when required (if holder of HGV licence). Ensure that all vehicle defects are reported to your workshop controller Fitting pumps & meters, repairing barrels, accident damage repairs to tanker body work, fabricate components, perform tank pressure test inspections. You would also regularly work with hydraulics and pneumatics The successful HGV Trailer/Tanker Technician will require You will have an in-depth knowledge of commercial vehicles, HGV Trailers and Tankers Hold an HGV licence Class 1 (essential) Be a fully qualified HGV Trailer/Tanker Technician with City & Guilds / NVQ level 3 in heavy vehicle maintenance and repair The successful HGV Trailer/Tanker Technician will receive Competitive salary Performance based support and development Cycle to work scheme Free parking Enhanced rate on overtime Company pension Next Steps If this sounds of interest or you are looking for advise on your next HGV Trailer/Tanker Technician role, please contact: Chris at Kemp Recruitment on (phone number removed) for further information

Trainee Medical Technician The Army - United Kingdom From £25,200 a year Want a different kind of action? Weve got hundreds of roles. You Belong Here. As a full-time, entry-level Combat Medical Technician and Soldier in the British Army, youll: Save lives on the front line Provide medical training and education to the Army Help with medical evacuations in hostile conditions See the world and make friends To qualify, you must be between 16 years 6 months and 35 years 6 months and pass a basic fitness test. Set yourself up for life. During your initial training, youll earn £25,200. If you set your mind to it, you could reach Corporal within 5 years, earning £37,861. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the entry-level training you need. Plus, youll get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. You Belong Here Apply Now TPBN1_UKTJ

Ink Technician Leeds | Rotating Days & Nights | £14.37 - £15.73 per hour + Excellent Benefits Major Recruitment are proud to be recruiting on behalf of a long-established and highly respected packaging manufacturer based in Leeds. This is an excellent opportunity to join a forward-thinking business with modern production facilities, strong investment in people and technology, and genuine long-term career prospects. About the Company: Our client is a leading UK manufacturer of innovative flexible packaging solutions, supplying major UK and European brands across the food, homecare, and consumer goods sectors. Their product range includes printed packaging, pouches, bags, films, and laminated products, all produced within a state-of-the-art manufacturing environment focused on quality, efficiency, and continuous improvement. What's on Offer: Competitive hourly rate: £14.37 - £15.73 per hour (depending on experience) Average 40 hours per week Rotating continental shift pattern: 2 weeks working 3 shifts 1 week working 4 shifts Shift times: 07:00 - 19:00 19:00 - 07:00 Monday to Friday rotating days and nights On-site canteen facilities Company pension scheme Cycle to Work scheme Health & wellbeing programme Company sick pay Staff store discounts Genuine opportunities for progression and development The Role - Ink Technician: As an Ink Technician, you will play a key role in supporting the printing operation by preparing and managing inks to precise customer and production specifications. Working within a fast-paced manufacturing environment, you will use specialist colour management and dispensing systems to ensure consistent quality, minimise waste, and maintain efficient production flow. This is a hands-on role requiring excellent attention to detail, strong organisational skills, and the ability to work both independently and as part of a wider production team. Key Responsibilities: Prepare inks using GSE dispensing systems and X-Rite colour management tools Produce accurate colour matches in line with production schedules and customer specifications Manage and reuse press return inks efficiently Troubleshoot ink-related issues on printing presses Deliver inks to production presses and return unused stock to the ink store Unload ink deliveries and safely store materials within the designated compound Maintain excellent housekeeping standards within the ink store area Carry out routine maintenance of dispensing systems Safely handle 200kg barrels and 20kg pails using appropriate equipment and handling tools Work in line with strict Health & Safety and quality standards at all times Health, Safety & Quality: The successful candidate will be expected to: Follow all workplace safety procedures and company policies Identify and report hazards, accidents, near-misses, or unsafe practices Maintain high standards of hygiene and housekeeping Ensure products consistently meet quality assurance standards and KPI targets Support a positive, respectful, and inclusive working environment Skills & Experience Required: Previous experience in an Ink Technician, Ink Mixing, or similar manufacturing role Experience using GSE systems or equivalent colour dispensing equipment preferred Strong attention to detail and ability to follow procedures accurately Good communication and teamwork skills Comfortable working under pressure in a fast-paced environment Basic computer literacy Flexible approach to working hours and overtime when required Ability to work independently with minimal supervision Reasonable level of physical fitness due to lifting, bending, and manual handling requirements Please note: this role is subject to an Ishihara colour vision test Why Apply? This is an opportunity to join a stable and growing manufacturer with an excellent reputation in the packaging industry. The company offers long-term career prospects, supportive training, and a modern working environment where employee wellbeing and development are genuinely valued. How to Apply Sound like the perfect fit? We'd love to see your CV. Please send us your up-to-date CV highlighting your relevant experience. If you're shortlisted, we'll be in touch within 2 working days. INDMG

Job Title: Service & Installation Engineer, Northern England Leeds area, A1/M1 Corridor Location: Field Based Covering Northern England Leeds area, A1/M1 Corridor Salary: £36,000 - £40,000 per annum depending on experience with possibility to increase after probation Job Type: Full-time, Permanent Holidays: 25 days per full calendar year, increasing with length of service, plus public holidays Closing Date: 12th June 2026 About Us: Founded in 2004 with a singular vision-to deliver controlled clean environments. We have built our reputation on advanced recirculating technologies that ensure the highest standards of containment and safety. Now a proud member of the SDI Group, Monmouth Scientific is recognised as a leading name in clean air solutions, serving a diverse range of sectors including life sciences, pharmaceuticals, aerospace, pathology, forensics, precision engineering, manufacturing, and academic research. Summary of Duties: To Service our full range of products in line with the latest British Standards, including legal (digital) Service paperwork completion To drive nationwide as needed, predominantly Northern England and covering Scotland to represent Monmouth face to face with our customers in a professional, well-presented and courteous manner. To deliver, install, commission, service and keep our wide range of laboratory equipment and Clean Rooms at Customer premises. To provide Customer training during delivery, commissioning & installation of new products. To undergo ongoing product and application training, both internal and external, to maintain individual skills and keep up to date with the latest Standards. To undertake ad hoc duties, tasks or activities required or deemed necessary, as required. To adhere to all Health & Safety policies & procedures issued by the Company.About you: Essential Key Skills & Person Specification (including but not limited to): Excellent attention to detail, logical problem-solving skills, and a practical 'attitude. High personal standards and a 'driven' approach to work, willing to accept responsibility. Ability to follow processes and quality-controlled standards of work, in line with Company procedures. Proficient organisational and workload management skills Ability to work flexibly and re-prioritise as required, to meet a continuously changing delivery schedule. Calm disposition under pressure, able to make effective decisions and work to tight deadlines. Personable nature, with effective communication and listening skills, able to consult confidently with staff and Customers at all levels. Tact and diplomacy when on site, with the ability to deal with multiple Customer queries at once. GCSE (or equivalent) Grade "C" in English Language and MathematicsEssential / Desirable Skills: Essential - Industry-related service & installation experience with Bio-cabinets, D.O.P. & KI Testing. Competency in electrical skills, fault finding (18th Edition, qualified, desirable) Essential - CSCS Card, IOSH or equivalent, Driving Licence & DBS checks for MOD, Home Office, Nuclear, Schools and Colleges etc. Desirable - P601 and Clean Room Validation an advantage.Benefits: 25 days holiday to start with 1 x extra day a year after five years to a max 30 days Fully expensed company van and top range test equipment up to date industry training courses Over time, overnight allowance and a good weekend paymentAdditional Information: This Job Description is provided to assist the Employee in understanding the principal duties of the role. It may, however, be amended from time to time by the HR Department as the job evolves, in consultation with the Employee, without any change to the level of responsibility or remuneration appropriate to the grading of the position. Please click on the APPLY button to submit your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of; Service Technician, Field Service Engineer, Technician, Service Engineer, Maintenance Engineer, Installation Engineer, Repairs Engineer, Maintenance Engineer, Multi Skilled Engineer, Maintenance Technician, Multiskilled Engineer, Field Service Technician and Site Maintenance Engineer, Bio Cabinets Engineer, KI Testing Technician may all be considered

Mechanical Test Technician (Aerodynamics & R&D). The work is hands-on, varied and technical - involving the setup, operation and maintenance of complex test rigs, mechanical systems and specialist measurement equipment used in high-performance testing environments. You’ll be part of a team prepari

Test Technician – Electric Drive Systems - Norfolk - Contract (Outside IR35). You will be responsible for setting up and operating dynamometer test rigs, supporting Design Verification Plans (DVP), collecting and validating test data, and assisting engineering teams with development and validation

Speedy are the UK & Irelands leading hire provider with the widest range of tools, specialist hire equipment, plant and support services everything for every job! Job Title - Test and Run Technician Location - Poole Working Hours - Monday to Friday - 07:30 - 17:00 - 42 hours per week The role of a T

Role Purpose The Radar Repair Technician is responsible for the inspection, fault diagnosis, repair, testing and certification of radar electronic Line Replaceable Units (LRUs) down to component level. Organisational Context The Radar Repair Technician reports directly to the AD Radars Senior Progra

To test / repair any PCB's or assemblies in accordance with test procedures and to the quality control standards. Responsible for testing all main assemblies and sub-assemblies (including PCB's) to the correct test procedure. To maintain /repair and help design company test equipment.

Key Responsibilities of Test Technician: Set up and operate test equipment and processes Conduct functional, environmental, and performance tests Record and report test data and deviations Interpret technical drawings and specifications Maintain and calibrate test equipment Collaborate with engineer

The ideal candidate will have an electronics background and experience in the following areas: Conduct Production tests using test procedures, documentation and equipment as required Experience testing PCB Assemblies and Mechanical assemblies Experience accurately identifying components. Our electro

DOE Monday Thursday 2pm-10:45pm and Friday 2pm-7pm Optional Overtime Opportunities to train and progress Healthcare Company pension scheme Free parking Test Technician Duties; Testing production boards using test programs on the flying probe machine Bench testing product to meet production demand Id

Testing of PCB's in high voltage applications and test report write up's. We are recruiting for a knowledgeable Electrical Test Technician for our globally renowned client based in Luton. Investigate and repair component level PCB's and test equipment failures.

You'll be involved in key testing of sealing materials, using both automated and traditional tests. Jobs in Science is seeking an R&D Engineering Technician in Cleckheaton, West Yorkshire.

A leading integrated facilities provider in Wakefield seeks a Test & Inspection Electrician to inspect, test, maintain, and repair electrical systems.

Ontic is seeking a Pneumatic Test Technician in Staverton, Gloucester, to test and validate pneumatic and mechanical assemblies in compliance with strict aviation standards. The role includes documenting testing results and supporting quality control processes.

You’ll work closely with the Manufacturing Team to ensure you test not only the products, but the sub level PCBs with the ability to use the test gear that comes with it such as oscilloscopes, frequency generators, meters, computers and programmers. Take on a key role in delivering high-quality el

Matchtech is seeking a skilled Prototype Technician for their client in the Defence & Security sector in the Borough of Runnymede.

Pneumatic Test Technician page is loaded## Pneumatic Test Technicianlocations: Staverton, Gloucestershiretime type: Full timeposted on: Posted Yesterdayjob requisition id: R5699Pneumatic Test Technician Staverton, Gloucester | Engineering | OnsiteOntic, a leading licensor and manufactur

You will support advanced aerodynamic testing for aerospace and defense, involving mechanical assembly, calibration, and operation of test rigs. SR2 | Socially Responsible Recruitment | Certified B Corporation™ is seeking a technician in Bedford for hands-on roles in a specialized engineering envi

The successful candidate will assist in the set-up and delivery of engine testing programs on a wide variety of testing from durability, through fuels and additive testing to research projects on prototype hardware. UTAC is recruiting for an Engine Test Technician to join the Engine Test Centre at o

Championing test processes including pre‑test assessments to ensure test readiness covering technical, operational and safety considerations. Setup of test control system configuration in accordance with the test requirements. Supporting Lead T&V Engineers in the scheduling of test facilities and

We’re looking for a Dyno Test Technician to join our Engine Department. As a Dyno Test Technician, you will operate and maintain our state‑of‑the‑art engine dyno facilities, supporting the development, calibration, and validation of high‑performance engines. Able to follow technical instru

Inside ARA this position is known as Wind Tunnel Technician whose primary function will be to operate aerodynamic test facilities in a safe, efficient manner, consistent with the needs of customer test requirements. Operation may include equipment calibration, the set-up of specialized measurement/m

A leading organisation within the defence industry is seeking a Test Technician to perform visual and functional checks on electronic units, document test processes, and ensure quality expectations. The ideal candidate should have over 3 years of experience in a production environment, preferably wi

Training of Test Technicians and Senior Technicians/Technicians. As a Electronic Test Technician you'll be involved in the design of electronic and RF circuits as part of a multi-functional team.

UTAC is recruiting for an Engine Test Technician to join the Engine Test Centre at our Millbrook site in Bedford. The successful candidate will assist in the set‑up and delivery of engine testing programs on a wide variety of testing from durability, through fuels and additive testing to research

Following standard work procedures and instructions to install engines into test cells, and to connect test measurement systems and associated equipment and services to ensure high-quality data collection. Diagnosing and fixing a range of faults on both engines and test cell equipment.

UTAC group in France is seeking a Dyno Support Technician / Senior Technician to ensure that engine, powertrain, and vehicle test facilities operate safely and consistently. Key responsibilities include maintaining test cells, performing equipment calibration, and troubleshooting instrument faults.

Teledyne Technologies Incorporated is seeking a Test Technician to conduct detailed RF and digital testing to ensure product performance meets specifications. Based in Bradford, England, the role includes fault-finding, maintaining electronic testing equipment, and reporting technical problems.

Practicus is seeking a Senior AIT Technician to support the assembly, integration, and testing of satellite systems in the dynamic space technology sector.

Responsibilities include performing reliability tests, maintaining test equipment, and managing documentation. Bourns in Bedford is seeking an enthusiastic individual for a role supporting the product development team through electrical, thermal, and mechanical testing of products.

Orion Electrotech seeks a Test Technician to join Industrial Physics, supporting test and measurement solutions. Responsibilities include assembling, testing, and calibrating sensitive electromechanical devices for various industries, with a strong emphasis on maintaining precision.

A leading international elevators firm is seeking a Lift Tester based in London to ensure the safety of elevator installations. The role involves testing and troubleshooting elevators, liaising with customers, and conducting inspections to meet safety standards. Candidates should have at least 6 mon

Based near Dudley and reporting to the Development Manager, the successful Research and Development Technician candidate will be tasked with supporting the effective operation of the Research and Development function, involving the design, development, testing, approval, and support of new and modif

As a Test Technician, you’ll play a critical role in assembling, testing, and calibrating highly sensitive electromechanical devices used in laboratories and production facilities worldwide. What You’ll Do as a Test Technician. What We’re Looking For as a Test Technician.

An aerospace company in Farnborough is seeking an Avionic Test Technician to assist with the verification and validation of avionics systems for high altitude platforms. The role requires executing tests, supporting troubleshooting, and collaborating closely with engineering teams. Candidates should