Wing jobs in BristolCreate job alerts

Role: Lab EngineeringTechnician Location: Bristol Duration: 12 months Rate: £40 - £60/hour - Umbrella Inside IR35 Our client is seeking an Engineering Lab Technician to join a small, high-calibre team developing the next generation of on-wing engine inspection technologies and automation solutions. Key responsibilities: * Support engineering R&D projects through a broad range of development testing. * Design,... ZIPC1_UKTJ

Our Mission At Vertical Aerospace, we are pioneering the way for electric aviation. The Valo, our eVTOL (electric, vertical, take-off and landing), 'zero emissions' aircraft will set a new safety standard for how we will navigate the sky. We won't realise our mission following the same legacy processes and traditions our predecessors followed, instead, we want to 'redefine' aerospace best practices. We are growing quickly from a prototype business to a scaling SME, and the next few years will be critical to our success and delivering on our ambitious goals. Valo is targeting airliner-level safety certification in 2028 ahead of entering service with our airline and operator customers. What to ExpectAs a Stress Engineer, you’ll support the structural substantiation of the full airframe, contributing across fuselage, wing, and pylon structures. Reporting to the Principal Stress Engineer you’ll work on analysis from early trade studies through to detailed certification support, helping to demonstrate compliance through high-quality calculations and finite element modelling. You’ll operate in a fast-evolving development environment where inputs may not be fully defined, requiring sound engineering judgement and the ability to make balanced assumptions while maintaining safety and certification intent. You’ll collaborate closely with design, test, and manufacturing teams to ensure structural integrity is built into the aircraft from concept to flight. What You’ll Do * Perform hand calculations and finite element analysis to substantiate metallic and composite airframe structures * Develop and maintain FEM models using tools such as HyperWorks to support trade studies, detailed design, and certification activities * Support structural sizing and optimisation in collaboration with design engineers * Contribute to test definition and correlation activities to validate analytical models * Generate clear, traceable analysis reports to support compliance documentation * Participate in multi-disciplinary design reviews, providing structural insight and challenge where needed * Support manufacturing and build teams with timely structural assessments and resolution of technical queries What You’ll Bring * Experience performing structural analysis of aerospace structures using both hand calculations and FEM * Practical experience with FEM tools such as HyperWorks * Understanding of metallic and composite structural behaviour * Familiarity with airworthiness requirements and methods of demonstrating compliance * Ability to produce clear, well-structured technical reports suitable for certification evidence * Comfortable working with evolving requirements, applying sound engineering judgement where inputs are not yet fully defined * A proactive mindset, with the ability to develop or adapt analytical approaches to solve novel structural challenges and drive mass optimisation * Strong problem-solving skills and the confidence to work across engineering disciplines * A degree in aerospace, mechanical, or a related engineering discipline #LI-LD1 What can you expect from us? We're on a mission. Where others see limits, we see opportunity, and we work at pace. Working at Vertical isn't your average role but for those seeking a challenge, a flexible, supportive organisation and an incredible team; working here is an opportunity to do the best work of your career. Our approach promotes ingenuity and courage, while our environment builds success through diligence in safety and being open in the way we work. The only way we're going to assure the next chapter of aviation history is by working as a team, relentlessly, towards our goal. Our benefits Our people matter - we're not going anywhere without them. Which is why our company benefits go beyond the essentials. * 26 days holiday, plus bank holiday * 5 extra days per year to buy (or sell) * 5 extra days holiday when you get married or enter a civil partnership * Additional 4% of your salary to spend on extra benefits * Award-winning digital health and wellbeing service (Help@Hand) * Company performance based bonus - rewarding company and individual performance * Company Share Scheme - open to every Vertical employee * Company Pension Scheme - 5% and we match it * Breakfast on us, every day We may just be the hardest job you've ever had, but we're confident it will be the most rewarding. Join the team today and help us shape the future of Advanced Air Mobility. Disclaimer Statement We encourage you to apply even if you may not have all the experience listed in the advert. We recognise that talent comes in various forms and we are committed to providing opportunities that create an environment of growth, diversity, and inclusion for everyone. As part of our desire to review and make our processes fair, we may ask you questions related to these aspects during the application process. For more information on how we will use your data, see our Legal section.

**PLEASE READ BEFORE APPLYING: Recognising the RESTRICTED nature of the work suitable candidates will be baseline level (BPSS) clearable or eligible for this level of clearance Job Summary: Our client GKN Aerospace () are looking to recruit several Composite Operators to be based at their Severn Beach site (postcode is BS35 4GG) the role will involve the manufacture of aircraft components from composite materials which meet design and engineering requirement Rates: Days pays £16.38 p/hour, any Weekday Overtime pays £24.57 p/hour, Weekend Overtime pays £32.76 per hour Any Shift Rate pays £20.97 p/hour (overtime rates the same as above) Hours: Short period of Days (Mon to Fri 7.30am to 3.30pm) then working Shift, hours as follows: WEEK ONE: Monday, Tuesday, Friday, Saturday & Sunday (6am to 6pm) 57.5 hours WEEK TWO: Weds & Thursday (6am – 6pm) 23 hours Key Responsibilities: • Manufacture aircraft components from carbon and glass fibre pre-preg materials, • Use processing equipment to lay-up and cure composite wing spars and test pieces, • Use forming presses, drape machines, vacuum presses, automated tape lay and fibre placement machines, laser projection equipment, autoclaves and ovens to manufacture and cure composite spars, • Prepare and clean mandrels and cure tooling for manufacture of composite spars, • Participate fully in local continuous improvement activities, • Ability to operate CNC machines and processes, • Experience of assembling and manufacturing production components using drawings and processes, • Experience in a manual handling work environment, • Ability to assemble and trim composite and ancillary materials to close tolerances, • Good hand skills and co-ordination, • Understand aircraft drawings, limits and quality systems, • Knowledge of composite bonding and assembly techniques using pre-preg materials, • Self-motivation with good communication and interpersonal skills, • Ability to work both alone and in small teams, • Ability and willingness to undertake training and understanding of composite manufacturing techniques and processes, • To take responsibility to “self-certify” own work

Site Relationship Manager (Digital) - FiltonLocation: Filton - around 60% onsite, with flexibilityHours: 35 hours per week (4.5-day week between 07:00-19:00)Clearance: BPSS+ (arranged by Airbus)Pay: £26.16 per hour (PAYE) / £35.00 per hour (Umbrella)Working style: Hybrid (onsite presence required)Join us and shape the digital future of the Filton PlantGuidant Global is delighted to partner with Airbus to recruit a Site Relationship Manager (SRM) supporting Digital for Operations at the Filton Plant.This is a fantastic opportunity for someone who thrives on building strong relationships, influencing digital strategy, and supporting operational excellence in a complex manufacturing environment.As the SRM, you'll be the essential link between the Digital organisation and plant operations-acting as a trusted advisor, championing digital solutions, and ensuring the site receives exceptional support for digital products and tools.What you'll be doingYou will play a strategic, visible, and highly influential role, including:Strategic partnership & stakeholder engagement • Build strong, trusted relationships with Filton Plant leadership and operational teams., • Represent the Digital function onsite, attending key routines and providing regular updates on digital performance, adoption, and value., • Coordinate and support the deployment of Digital products, ensuring the right stakeholders are engaged and risks/opportunities are managed., • Ensure smooth business continuity for all plant-critical digital solutions., • Challenge current ways of working and help drive change, simplification, and digital innovation., • Promote digitalisation, automation, and the removal of legacy applications., • Strengthen local cyber-security practices by supporting and developing the IT-in-OT team., • Ensure effective crisis management, including communication, root-cause analysis, and preventive actions., • Coach and develop Digital team members, including early-career talent., • Work closely with Digital Workplace, ERP/SAP, Infrastructure and other teams to ensure aligned delivery., • Experience working in large-scale industrial, engineering or manufacturing environments., • Broad understanding of digital products, tools, and processes., • Stakeholder management expertise with the ability to influence at all levels., • Strong communication skills, adaptable to diverse technical and operational audiences., • Knowledge of cyber-security practices (desirable but not essential)., • Confident building trust across teams., • Proactive, resilient, and comfortable leading in fast-moving environments., • Curious and forward-thinking with a continuous-improvement mindset., • A secure, resilient digital ecosystem, • Streamlined operations and improved productivity, • Successful digital transformation across the plant, • A highly influential role at the heart of digital transformation, • The opportunity to impact operational excellence at a major Airbus site, • Hybrid working and a supportive onsite community, • Coaching and leadership opportunities within the Digital organisation Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Our Mission At Vertical Aerospace, we are pioneering the way for electric aviation. The Valo, our eVTOL (electric, vertical, take-off and landing), 'zero emissions' aircraft will set a new safety standard for how we will navigate the sky. We won't realise our mission following the same legacy processes and traditions our predecessors followed, instead, we want to 'redefine' aerospace best practices. We are growing quickly from a prototype business to a scaling SME, and the next few years will be critical to our success and delivering on our ambitious goals. Valo is targeting airliner-level safety certification in 2028 ahead of entering service with our airline and operator customers. What to ExpectAs a Design Engineer, you’ll contribute across the full airframe, working on fuselage, wing, and pylon structures. You’ll be involved from early concept development through detailed design and production release, helping to create mass-optimised, functional, and certifiable structural solutions. Reporting to the Head of Airframe Integration, you’ll collaborate closely with stress, manufacturing engineering, systems, and build teams to turn innovative concepts into flight-ready hardware. What You’ll Do * Design composite and metallic airframe structures using CATIA / 3DEXPERIENCE, from initial concept through to production-ready definition * Develop mass- and function-optimised solutions that meet structural, manufacturing, and certification requirements * Create detailed design data to support part manufacture and assembly build * Work across fuselage, wing, and pylon structures to ensure robust integration across the aircraft * Participate in multi-disciplinary design reviews throughout the aircraft development lifecycle * Provide hands-on design support to the aircraft build process, responding clearly and pragmatically to shop-floor queries * Collaborate with stress, manufacturing, and certification teams to ensure compliance and readiness for certification What You’ll Bring * Experience designing both composite and metallic structures within an aerospace or similarly regulated industry * Understanding of structural design fundamentals, including tolerances and key characteristics * Awareness of interchangeability principles and their importance in aircraft assembly * Familiarity with aircraft structural certification and methods of demonstrating compliance * Confident communication skills, with the ability to work effectively across engineering disciplines * Experience using CATIA and 3DEXPERIENCE in a professional setting * A degree in aerospace, mechanical, or a related engineering discipline #LI-LD1 What can you expect from us? We're on a mission. Where others see limits, we see opportunity, and we work at pace. Working at Vertical isn't your average role but for those seeking a challenge, a flexible, supportive organisation and an incredible team; working here is an opportunity to do the best work of your career. Our approach promotes ingenuity and courage, while our environment builds success through diligence in safety and being open in the way we work. The only way we're going to assure the next chapter of aviation history is by working as a team, relentlessly, towards our goal. Our benefits Our people matter - we're not going anywhere without them. Which is why our company benefits go beyond the essentials. * 26 days holiday, plus bank holiday * 5 extra days per year to buy (or sell) * 5 extra days holiday when you get married or enter a civil partnership * Additional 4% of your salary to spend on extra benefits * Award-winning digital health and wellbeing service (Help@Hand) * Company performance based bonus - rewarding company and individual performance * Company Share Scheme - open to every Vertical employee * Company Pension Scheme - 5% and we match it * Breakfast on us, every day We may just be the hardest job you've ever had, but we're confident it will be the most rewarding. Join the team today and help us shape the future of Advanced Air Mobility. Disclaimer Statement We encourage you to apply even if you may not have all the experience listed in the advert. We recognise that talent comes in various forms and we are committed to providing opportunities that create an environment of growth, diversity, and inclusion for everyone. As part of our desire to review and make our processes fair, we may ask you questions related to these aspects during the application process. For more information on how we will use your data, see our Legal section.

Inside IR35 – contract until end of 2026 (initially) Up to £52 per hour umbrella Hybrid working (circa 3 days per week on site) Job Role: An opportunity has arisen for an experienced Repair Design Engineer dealing within wing repairs for our client in Filton, Bristol. The Repair Design Engineer will be responsible for Authoring, Leading and executing repair tasks within a small team. Key Responsibiliti... ZIPC1_UKTJ

Wing Industrial Architect Location: Filton (60% onsite) Contract: Full-time Security Clearance: BPSS + eligibility for UK SC clearance Join us in shaping the future of wing industrial systems Guidant Global is proud to partner with Airbus to recruit a Wing Industrial Architect, a unique opportunity to help co-create the next generation of aerospace products and the industrial systems that bring them ... ZIPC1_UKTJ

Contract Senior Repair Design Engineer Are you an Airframe Design Engineer? Do you have experience using CATIA V5? Excited by the idea of hybrid working? We're looking for a Senior Design Engineer to join a long-term repair and modification programme, supporting the development and definition of wing structural design solutions on an initial Inside IR35 12 month Contract based in Bristol. In this role, you'll work closely with stress, design, and project teams to deliver high-quality CAD models and drawings (Catia V5) in support of ongoing repair activities. What You'll Be Doing as a Senior Design Engineer? • Creating, updating, and maintaining parametric 3D models in Catia V5, • Producing accurate 2D detail and installation drawings, • Interpreting Airbus stress analysis data and project requirements to develop repair design solutions, • Managing interfaces between wing structural components and systems, • Considering manufacturing and installation constraints within design outputs, • Contributing to structural repair design activities What You'll Bring • Strong proficiency in Catia V5, • Experience creating high-quality parametric CAD models, • Ability to produce clear, accurate engineering drawings, • Ability to interpret stress and project inputs to produce design deliverables, • Awareness of manufacturing, installation, and repair processes Apply now and have your CV reviewed within 2-3 working days! This vacancy is being advertised by Belcan

Job Title: Lead Design Engineer – Aircraft Structures (eVTOL) Contract Type: Fixed-term, 12 months (Inside IR35) Location: Hybrid – on-site and remote (dependent on project/customer requirements) Overview We are seeking a highly skilled and motivated Lead Aircraft Design Engineer to join our engineering team for eVTOL (electric vertical take-off and landing) aircraft development. This role focuses on the design and development of primary and secondary aircraft structures, including Wing, Empennage, and Fuselage, integrating cutting-edge technologies to achieve optimal performance. Experience with aircraft testing is an advantage. Key Responsibilities • Lead the design and build of prototype eVTOL aircraft structures., • Develop composite and metallic structure designs, including detail and assembly definitions., • Create and cross-check model-based definitions within 3D Experience digital mock-ups (DMU)., • Collaborate with Systems Integration teams to ensure structural design accommodates system routing requirements., • Report to the Design Lead and support the team in delivering design engineering solutions., • Participate in technical and customer reviews, including formal gate reviews; prepare technical data and presentations., • Define design solutions for new components and modifications to existing components, considering cost, weight, quality, manufacturability, serviceability, and performance., • Provide evidence of design compliance with technical and customer specifications., • Prepare drawings and engineering data required for manufacturing and customer submittals., • Produce Engineering Change Notices (ECN) as needed to support manufacturing, quality, certification, and customer requirements., • Ensure the quality of deliverables for self and team., • Act as the technical interface with certification authorities to ensure compliance with airworthiness and certification standards., • Attend customer facilities for key meetings and design reviews, with hybrid working as applicable. Essential Skills & Qualifications • Bachelor’s or Master’s degree in Aerospace Engineering, Mechanical Engineering, or related field., • Experience in aircraft design, preferably with eVTOL aircraft., • Proven design experience on primary and secondary structures: Wing, Empennage, Fuselage., • Hands-on expertise with CATIA V5 and 3D Experience, including Composites Design 3 (CPD) workbench and Fibresim., • Experience with Product Lifecycle Management (PLM) tools, e.g., Windchill., • Knowledge of GD&T and tolerance stack-up analysis., • Familiarity with aerospace composite and metallic materials and their manufacturing processes., • Knowledge of aviation regulations and certification processes (e.g., FAA, EASA) is highly desirable., • Strong problem-solving skills, able to analyze complex engineering problems and propose effective solutions., • Excellent verbal and written communication, with ability to work collaboratively in fast-paced environments., • Customer-focused, with the ability to establish credibility with internal and external stakeholders., • Ability to work to tight deadlines and meet demanding project requirements., • Proficiency in MS Office tools and MS Project., • Passion for innovation, sustainable aviation, and eVTOL technologies. Benefits • 20 days annual holiday, • Pension contributions: 4% from company and 4% from employee (can be increased based on associate preference), • Insurance benefits

Senior Flight Control Laws Engineer - New Aircraft iO Associates is excited to be supporting a pioneering aerospace organisation developing a clean‑sheet, next‑generation aircraft. As the team continues its rapid growth, we are seeking a Senior Flight Control Laws Engineer to help drive the design, development, and certification of advanced flight control technologies for a revolutionary aircraft platform. This is a unique opportunity to shape the behaviour and safety of an all‑new aircraft category, using cutting‑edge model‑based engineering and a highly automated development pipeline. Requirements: • 6+ years of professional working experience in in Control Theory (classical and modern) and strong proficiency with MATLAB & Simulink in the aerospace industry, • Significant experience in flight control laws design, validation, and verification., • Strong understanding of fixed‑wing and rotorcraft flight dynamics., • Knowledge of aerospace software standards and certification frameworks (ARP4754, DO‑178C, DO‑331)., • Familiarity with CAA/FAA/EASA regulations., • High motivation, analytical mindset, and confidence in making robust design decisions. Responsibilities: • Lead and contribute to the full lifecycle of flight control laws development for both development and certification aircraft., • Make key architecture and design decisions while working collaboratively with teams across flight dynamics, aerodynamics, propulsion, and avionics., • Ensure development adheres to industry standards such as SAE ARP4754, DO‑178C, and DO‑331., • Support certification efforts through documentation, safety assessments, and authority engagement., • Mentor junior engineers and help shape best practices within the Flight Control Laws team., • Integrate control laws within complex aircraft systems to meet performance, safety, and regulatory requirements. The hiring manager is reviewing profiles immediately, so please apply today with your updated CV to be considered for this role.

REPAIR DESIGN ENGINEER NEW CONTRACT OPPORTUNITY AVAILABLE WITH A LEADING AEROSPACE COMPANY FOR A REPAIR DESIGN ENGINEER • Up to £52ph inside IR35, • Initial contract until December 2026, • Onsite in Filton - opportunity for 2 days a week from home, • 35 hour working week, • BPSS clearance required WHAT WILL THE REPAIR DESIGN ENGINEER BE DOING? The role will provide the opportunity to join a team responsible for the design of repairs on composite structures. This team work closely with a variety of Stress Engineers to create and validate repairs to damaged aircraft structures. Other roles include: • Liaising with stakeholders to ensure all requirements are met, • Adhering to airworthiness regulations, methods, and capability guidelines, • Creating and coordinating engineering documentation to deliver the required technical data for repairs. WE NEED THE REPAIR DESIGN ENGINEER TO HAVE…. • Have an Aircraft Structural Engineering background, • Experience designing repairs and working with spares (ideally wing repairs), • Ability to read production drawings, • The ability to go through a BPSS check, • Desirable: Hold a Design Approval Delegation TO BE CONSIDERED…. Please either apply by clicking online or emailing me directly to For further information please call me on 0203 854 0120. By applying for this role, you give express consent for us to process & submit (subject to required skills) your application to our client in conjunction with this vacancy only. Also feel free to connect with me on LinkedIn, just search Ryan Baker. I look forward to hearing from you.

Manufacturing Engineer - Aerospace 12 month contract Based in Filton Offering £46ph Inside IR35 Do you have experience using CATIA V5? Do you have Aerospace experience? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Development and delivery of an industrial plan for wing research demonstrator projects, • Providing input to manufacturing project change processes by assessing the impact of design changes to manufacturing cost and schedule, • Liaison with production team on topics such as scheduling and operational resource planning, • Working with the jigs and tooling team to ensure enablement of jig design and delivery, • Working with tooling and component suppliers to ensure adherence to planning and management of changes, • Generation and validation of manufacturing capability documentation, • Working across the design and manufacturing interface to assure and validate Condition of Supply agreements, • Managing and planning detailed delivery specifications to ensure Quality Assurance requirements are met and validated, • Working across the Manufacturing Engineering team to ensure alignment of schedule and facilitate information sharing Your skillset may include: • Experience working in a manufacturing engineering or production environment and familiarity with production processes, • Knowledge and experience of aerospace structures (understanding the key structural components and manufacturing techniques associated with aircraft wings), • Experience in the use of CAD tools, specifically CATIA V5, • Fluency with standard office IT tools (Google Suite) If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

SKILLED AIRCRAFT FITTER CONTRACT OPPORTUNITY AVAILABLE WITHIN A LEADING AEROSPACE COMPANY FOR A SKILLED AIRCRAFT FITTER • £27.89/ph inside IR35, • Initial 12-month initial contract with very likely extension, • Very strong possibility of a permanent position, • Onsite in Filton, • 6:30-15:45 Monday to Thursday with overtime available, • Looking at a start date of May 5th ABOUT THE CLIENT: Our client is a leading global name in aerospace, responsible for designing, manufacturing, and testing wings for some of the world’s most advanced aircraft. Their Filton site plays a vital role in the aerospace supply chain, supporting both commercial and military aviation sectors. Due to a growing pipeline of work, they are looking to recruit a number of Skilled Aircraft Fitters to support production operations for their A400M programme. WHAT WILL THE SKILLED AIRCRAFT FITTER BE DOING? As an Aircraft Fitter, you’ll be based in the build production section supporting aircraft wing assembly. Your tasks will include working from engineering drawings, using power tools to drill, shim and seal, and ensuring all work meets the required standards. The role involves tank work, so working in confined spaces will be necessary. You will also be expected to obtain 1st party certification following relevant training. WE NEED THE SKILLED AIRCRAFT FITTER TO HAVE…. • A time served engineering apprenticeship, • City & Guilds Level 2, BTEC ONC or NVQ Level 2/3 in a relevant engineering discipline, • The willingness to work in confined spaces, • Experience using hand tools and working in a fitter/assembly operator role, • The ability to go through a BPSS check and pass a pre-employment medical TO BE CONSIDERED…. Please either apply through this advert or email me directly via . For further information, please call me on 0203 854 0120. By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only.

Senior Repair Design Engineer Are you an Airframe Design Engineer? Do you have experience using CATIA V5? Excited by the idea of hybrid working? We’re looking for a Senior Repair Design Engineer to join a long-term repair and modification programme, supporting the development and definition of wing structural design solutions. In this role, you’ll work closely with stress, design, and project teams to deliver high quality CAD models and drawings (Catia V5) in support of ongoing repair activities. What You’ll Be Doing as a Senior Repair Design Engineer? • Creating, updating, and maintaining parametric 3D models in Catia V5, • Producing accurate 2D detail and installation drawings, • Interpreting Airbus stress analysis data and project requirements to develop repair design solutions, • Managing interfaces between wing structural components and systems, • Considering manufacturing and installation constraints within design outputs, • Contributing to structural repair design activities What You’ll Bring: • Strong proficiency in Catia V5, • Experience creating highquality parametric CAD models, • Ability to produce clear, accurate engineering drawings, • Ability to interpret stress and project inputs to produce design deliverables, • Awareness of manufacturing, installation, and repair processes

*PLEASE READ BEFORE APPLYING. Job Summary: Our client GKN Aerospace are looking to recruit several Composite Operators to be based at their Severn Beach site (postcode is BS35 4GG) the role will involve the manufacture of aircraft components from composite materials which meet design and engineering requirement Rates: Days pays £16.38 p/hour, any Weekday Overtime pays £24.57 p/hour, Weekend Overtime pays £32.76 per hour Any Shift Rate pays £20.97 p/hour (overtime rates the same as above) Hours: Short period of Days (Mon to Fri 7.30am to 3.30pm) then working Shift, hours as follows: WEEK ONE: Monday, Tuesday, Friday, Saturday & Sunday (6am to 6pm) 57.5 hours WEEK TWO: Weds & Thursday (6am - 6pm) 23 hours Key Responsibilities: • Manufacture aircraft components from carbon and glass fibre pre-preg materials, • Use processing equipment to lay-up and cure composite wing spars and test pieces, • Use forming presses, drape machines, vacuum presses, automated tape lay and fibre placement machines, Laser projection equipment, autoclaves and ovens to manufacture and cure composite spars, • Prepare and clean mandrels and cure tooling for manufacture of composite spars, • Participate fully in local continuous improvement activities, • Ability to operate CNC machines and processes, • Experience of assembling and manufacturing production components using drawings and processes, • Experience in a manual handling work environment, • Ability to assemble and trim composite and ancillary materials to close tolerances, • Good hand skills and co-ordination, • Understand aircraft drawings, limits and quality systems, • Knowledge of composite bonding and assembly techniques using pre-preg materials, • Self-motivation with good communication and interpersonal skills, • Ability to work both alone and in small teams, • Ability and willingness to undertake training and understanding of composite manufacturing techniques and processes, • To take responsibility to "self-certify" own work

CNC Composite Machinist – GKN Aerospace (Western Approach).Morson are exclusively recruiting.GKN Aerospace is recruiting CNC Machinists for its advanced composite manufacturing facility at Western Approach.The site produces carbon fibre wing spars for major aircraft platforms including the A350 an

Manufacturing Engineer - Aerospace 12 month contract Based in Filton Offering £46ph Inside IR35 Do you have experience using CATIA V5? Do you have Aerospace experience? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Development and delivery of an industrial plan for wing research demonstrator projects Providing input to manufacturing project change processes by assessing the impact of design changes to manufacturing cost and schedule Liaison with production team on topics such as scheduling and operational resource planning Working with the jigs and tooling team to ensure enablement of jig design and delivery Working with tooling and component suppliers to ensure adherence to planning and management of changes Generation and validation of manufacturing capability documentation Working across the design and manufacturing interface to assure and validate Condition of Supply agreements Managing and planning detailed delivery specifications to ensure Quality Assurance requirements are met and validated Working acr...

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. At our GKN Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic componentsand wing systems for a combination of both civil and military aircraft. The successful fabricators will be expected to work with a variety of industry equipment in carrying out various fabrication duties. We're looking for individuals that have knowledge of Pipe Bending, Swaging, Drill/Ream/Countersink in panels and other skills as expected with the role. The role will see candidates working day shifts, on a Monday Thursday basis, there is opportunity to work night shifts once fully trained which incurs an additional 33% shift premium. How You'll Contribute In this role, you will: • Work with various materials (titanium, aluminium, stainless steel) in the manufacture of aircraft parts, across a variety of Airbus family of aircraft, • Ensure parts are produced on a right first time basis, • Be responsible for the timely clearance of work phases using the SAP system, • Be responsible for highlighting any non-conformance to the Process Team Leader, • Adhere to the requirements of the GKNAF Quality Procedures, • Be accountable for Health & Safety requirements under Section 7 of the HASAWA 1974, • Hold first party inspection approval (M02 status is subject to obtaining A stamp approval), • Be responsible for general housekeeping within the area Essential: • A recognised and relevant apprenticeship and relevant NVQ level 3 (Or equivalent), • Previous experience in a manufacturing environment, • Ability to work to standard operating procedures, • Must be able to work in small teams with Team Leaders, • Knowledge of Lean manufacturing principles and techniques to support GKNAF continuous improvement initiatives, • Ability to operate CNC Machinery (Unison Pipe Bending machines, Power Presses, CNC Drilling & routering) ? Starting salary of £35,304 rising to £36,750 once fully certified (after around 3 months) + shift allowance where applicable (up to 33%) + Up to 4% Bonus ? Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (Total contribution up to 20%) ? Life Assurance 8 x salary ? 175 hours annual leave + bank holidays ? Income protection ? Shopping discounts ? Cycle To Work Scheme ? Employee Assistance Programme ? Virtual GP Clinic for you and immediate family ? A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We arethe place where human dreams, plus humanendeavour, shape the future of aerospace innovation and technology.? JBRP1_UKTJ

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. At our GKN Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic components and wing systems for a combination of both civil and military aircraft. We are seeking a Manufacturing Project Engineer to lead capital expenditure (CapEx) projects to deploy new production equipment, automated systems, and advanced industrial solutions within an aerospace manufacturing environment. The successful candidate will manage the end-to-end lifecycle of CapEx projects including concept development, business case creation, budgeting, scheduling, and execution. The successful applicant will work a 4.5-day week, including flexitime in a full-time permanent capacity, equating to a 35 hour week as part of a small team of Manufacturing Engineers. How You'll Contribute The successful applicant will: Prepare detailed equipment specifications that meet aerospace standards for precision, traceability, and repeatability. Design future processes implementing lean tools and methods in accordance with the GKN standard lean tool suite Coordinate supplier selection, RFQs, technical reviews, contract negotiations, and design verification Lead FAT (Factory Acceptance Test), SAT (Site Acceptance Test), commissioning, and full production readiness validation Ensure new equipment meets aerospace requirements such as NADCAP, AS9100, and internal engineering specifications. Validate equipment and processes through capability studies (Cp/Cpk), PFMEA, control plans, and process documentation Utilize root cause analysis, preventative and corrective action to reduce/eliminate non-conformances Ensure the delivery of expected benefits by driving projects to completion, on time and on budget, validating performance outcomes, and confirming that all operational, financial, and strategic objectives are fully achieved Build meaningful, lasting relationships with highly skilled operators, ensuring that any systems or equipment introduced are both appropriate and embraced Work closely with Production, Quality, Engineering, EHS, and Supply Chain teams to ensure seamless industrial deployment Maintain positive, team relationships with internal and external customers, as well as co-workers Continuously improve production and internal processes by implementing Lean initiatives Exemplify a safety-first mind-set and ensure compliance with the GKN Aerospace Health, Safety and Environmental policies and standards Ensure all new equipment complies with aerospace safety and certification rules (e.g., CE marking, machinery directives, EHS regulations) What You'll Bring To help us make a difference, youll bring your passion and expertise/ talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Technical expertise in Manufacturing Engineering, with a professional qualification / background (university degree) in engineering (Aerospace, Mechanical, Electrical, Chemical) Proven experience in CapEx project management within the aerospace, defense, or high-precision manufacturing sector Practical experience with industrial equipment, automation systems, robotics, machining, or assembly Desirable: Certifications: PMP/Prince2 Familiarity with AS9145 APQP process or equivalent We're looking for an individual that can manage complex technical interactions and lead long-term projects. You'll need excellent analytical and problem solving skills to succeed in this role along with a hands-on mindset. What We'll Offer Once youre on board youll get the following perks and benefits: A Competitive Salary Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (Totalling 20% Contribution) Life Assurance 8 x salary 25 days holiday + bank holidays Flexible working hours including the ability to finish at 12noon on a Friday Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? TPBN1_UKTJ

Lead Aircraft Stress Engineer Aerospace Structures Permanent | Aerospace | Advanced Air Mobility We are recruiting for an experienced Aircraft Stress Engineer to join a cutting-edge aerospace programme focused on eVTOL (electric vertical take-off and landing) aircraft and advanced air mobility platforms. This role is ideal for a hands-on Structural Analysis Engineer with strong experience in airframe primary structures, composite materials, and certification-driven environments. Key Responsibilities: • Perform detailed stress analysis on composite and metallic aircraft structures (wing, fuselage, empennage), • Conduct Finite Element Analysis (FEA) using tools such as Nastran, Patran, Hypermesh, Abaqus or Simcenter 3D, • Produce and check stress reports (PSR, JSR) to support airworthiness and certification, • Support FAA / EASA certification activities, • Participate in design reviews, trade studies and structural optimisation, • Ensure structures meet safety, manufacturability and maintainability requirements, • Background in aerospace structural analysis / aircraft stress engineering, • Strong knowledge of composite and metallic airfr...

MERITUS are recruiting for a large aerospace client based in Filton who are growing their engineering capability rapidly to meet upcoming demands. R&T MANUFACTURING ENGINEER - INSIDE IR35 - £46 PER HOUR - FILTON, UK - 12 MONTHS - SINGLE STAGE INTERVIEW PROCESS A leading aerospace engineering organisation is seeking an R&T Manufacturing Engineer to support the industrial preparation and build of next-generation aircraft wing technology demonstrators. The role sits within the Industrial Architecture / Manufacturing Engineering function and focuses on integrating manufacturing requirements across design, tooling, and production teams to enable the successful assembly of advanced structural demonstrators. This position acts as a Manufacturing Engineering Integrator, ensuring alignment between engineering design, production planning, tooling development, and supply chain partners. The successful candidate will work at the interface between design engineering and manufacturing operations, ensuring that demonstrator builds can be delivered efficiently, safely, and in line with programme schedules. Key Responsibilities Develop and manage industrialisation plans for wing research and technology demonstrator projects. Assess the manufacturing impact of engineering design changes, including implications for cost, schedule, and production feasibility. Work closely with production teams to support scheduling, operational planning, an...

Role: R&D Engineer Location: Bristol Duration: 12 months Rate: £40 - £60/hour - Umbrella Inside IR35 Our client is seeking an R&D Engineer to join a small, high-calibre team developing the next generation of on-wing engine inspection technologies and automation solutions. Key responsibilities: * Support engineering R&D projects through a broad range of development testing. * Design, set up and operate mechanical and electronic testing. * Develop testing apparatus and procedures. * Collect and process data using Excel, with Python desirable. * Report test results clearly to the team. * Devise new tests based on existing results. * Support basic 3D CAD work for test equipment design and build. * Assist with workshop activities and 3D printing. * Communicate effectively with technical and non-technical colleagues. * Travel occasionally within the UK to conduct product testing. Essential experience: * Engineering verification and validation. * Use of oscilloscopes, data loggers and similar equipment. * Workshop skills, including basic power and hand tools. * Experience in small, fast-moving engineering...

Aerospace R&T Manufacturing Engineer Certain Advantage is hiring for a Manufacturing Engineer based in the Filton area. This role is on a contract basis and is site-based. The Company We’re working with a Manufacturing business that operates in the Aerospace sector. They design, manufacture and deliver industry-leading commercial aircraft, and a separate Space and Defence division. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for an Aerospace R&T Manufacturing Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be working in a small, experienced, and collaborative team, and be responsible for: Development and delivery of an industrial plan for wing research. Working with the jigs and tooling team, and component suppliers. Generation and validation of manufacturing capability documentation. Working across the design and manufacturing.The Individual We’re looking for people who can show: Manufacturing engineering or production environment and familiarity with production processes. Aerospace structures (understanding the key structural components and manufacturing techniques associated with aircraft wings) CAD tools, specifically CATIA V5The Benefits: Hourly rate of circa £46ph via Umbrella company Flexible working Training and DevelopmentDoes...

Lead Aircraft Stress Engineer – Aerospace Structures Permanent | Aerospace | Advanced Air Mobility We are recruiting for an experienced Aircraft Stress Engineer to join a cutting-edge aerospace programme focused on eVTOL (electric vertical take-off and landing) aircraft and advanced air mobility platforms. This role is ideal for a hands-on Structural Analysis Engineer with strong experience in airframe primary structures, composite materials, and certification-driven environments. Key Responsibilities: * Perform detailed stress analysis on composite and metallic aircraft structures (wing, fuselage, empennage) * Conduct Finite Element Analysis (FEA) using tools such as Nastran, Patran, Hypermesh, Abaqus or Simcenter 3D * Produce and check stress reports (PSR, JSR) to support airworthiness and certification * Support FAA / EASA certification activities * Participate in design reviews, trade studies and structural optimisation * Ensure structures meet safety, manufacturability and maintainability requirements * Experience of leading engineering teams ranging from 5 to 20 team members Required Experience: * Background in aerospace structural analysis / aircraft stress engineering * Strong knowledge of composite and metallic airframe structures * Hands-on experience with Nastran or equivalent FEA solvers * Experience writing formal stress reports and certification documentation ...

Aerospace R&T Manufacturing Engineer 12 Month Contract (Extension Possible) Inside IR35 Based in Filton (Full Time On Site) Belcan are currently working with an industry leader in the aerospace industry to support them with their search for an Aerospace R&T Manufacturing Engineer Inside IR35 for a 12 month contract. The role is based in Filton, and there is an expectation to be 100% on site. Job Profile Summary The main focus of this role is to act as a Manufacturing Engineering Integrator, supporting the Filton Plant Industrial Architects team in the preparation and assembly of the wing research and technology demonstrators. The main areas of competence and experience required for this role are: - Experience of working in a manufacturing engineering or production environment and familiarity with production processes - Knowledge and experience of aerospace structures (understanding the key structural components and manufacturing techniques associated with aircraft wings) - Experience of and competency in the use of CAD tools, specifically CATIA V5 - Strong communication and interpersonal skills and the ability to communicate complex technical information in a clear, simple way - Ability to work autonomously and act as an interface between different areas of the design and manufacturing team - Fluency with standard office IT tools (Google Suite) - A strong team working ethic The key tasks of the role will comprise (b...

Role: R&D Engineer Location: Bristol Duration: 12 months Rate: £40 - £60/hour - Umbrella Inside IR35 Our client is seeking an R&D Engineer to join a small, high-calibre team developing the next generation of on-wing engine inspection technologies and automation solutions. Key responsibilities: Support engineering R&D projects through a broad range of development testing. Design, set up and operate mechanical and electronic testing. Develop testing apparatus and procedures. Collect and process data using Excel, with Python desirable. Report test results clearly to the team. Devise new tests based on existing results. Support basic 3D CAD work for test equipment design and build. Assist with workshop activities and 3D printing. Communicate effectively with technical and non-technical colleagues. Travel occasionally within the UK to conduct product testing. Essential experience: Engineering verification and validation. Use of oscilloscopes, data loggers and similar equipment. Workshop skills, including basic power and hand tools. Experience in small, fast-moving engineering teams. CAD experience. Creating test documentation, plans and results reports. Desirable: Test automation experience. Programming of Arduinos, Raspberry Pi, or similar. Robotic programming experience, such as UR robots. Personal attributes: Positive, self-motivated, and proactive. F...

LEAD FEM Engineer Certain Advantage is hiring for a Lead FEM Engineer based in the Filton area. This role is on a contract basis and is hybrid-based. The Company We’re working with a Manufacturing business that operates in the Aerospace sector. They design, manufacture and deliver industry-leading commercial aircraft, and a separate Space and Defence division. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Lead FEM Engineer—someone ambitious and ready to make an impact. You’ll be results-orientated and driven to succeed. You’ll be working in a small, experienced, and collaborative team, and be responsible for: Support the development of GFEM and DFEM projects across all Programmes Analyse and Validate FE and Stress data Deliver digital solutions to optimise Wing structure enablement processesThe Individual We’re looking for people who can show: Educated to degree level in Aerospace Engineering Knowledge and experience with FEM tools, i.e. Hyperwork, Hypermesh and MSC Nastran Experience with the idealisation of Wing component structure with Finite Element Methodology ISAMI competent user is an advantage FEM Signature delegation is an added advantage Knowledge and experience with UNIX-based platforms is an advantageThe Benefits: Hourly rate up to £50 ph via Umbrella company Fle...

Skilled Aircraft Fitter Location: Filton (100% onsite) Contract: 12 months, likely extension Pay: £20.85 per hour (PAYE) / £27.89 per hour (Umbrella) Hours: Monday-Thursday, 06:30-15:45 Clearance: BPSS+ (completed by Airbus Security) Start Date: 5th May 2026 intake (8 positions available) Join the team shaping the future of aerospace Guidant Global is proud to partner with Airbus, the world's leading aircraft manufacturer. We're looking for skilled and motivated Aircraft Fitters to join the team at their highly respected Filton facility. You'll be working within the Build Production team on cutting-edge commercial and military aircraft, contributing directly to the manufacture of world-class wing structures. This is a fantastic opportunity to build on your engineering expertise within a collaborative, safety-focused and forward-thinking environment. What you'll be doing As a Skilled Aircraft Fitter, you will play a key role in assembling aircraft components to exacting engineering standards. Your responsibilities will include: • Interpreting engineering drawings and following detailed work instructions, • Using a variety of hand and power tools for drilling, sealing, shimming, and general assembly work...

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. At our GKN Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic componentsand wing systems for a combination of both civil and military aircraft. Our newMaintenance Engineerwill join a small & friendly team working effectively and efficiently on breakdown and repairs. The team handle the planned scheduled maintenance and all associated tasks on both conventional and CNC machine tools and plant. This is a permanent role. The successful applicant will work night shifts (7pm-7am) on a 17 week rota as below: 17 weeks of Wednesday - Friday & every other Saturday 17 weeks of Sunday - Tuesday & every other Saturday (3 on - 4 off, 4 on - 3 off) The night shift has an additional 38% shift allowance for the first 35 hours, and 58% for anything extra paid in addition to the basic salary. How You'll Contribute In this role, you will maintain and diagnose faults on: Machine tool/plant including: • Machine tool axes including linear guides / rails, motors, gearboxes, lead screws, bearings, • Machine guarding both internally and externally, • Hydraulic and pneumatic systems including counter balance circuits, hydraulic clamping, hydraulic motors, rams, cylinders, • checking and topping up various oils, fault finding & diagnostics on complex Machine tools/plant as well as diagnosing faults on rails, gearboxes etc Machine alignments by: • Checking and correction of machine alignments, by clocking bars, datum holes and slip gauges, laser alignments, ball bar tests, • Correction by changing parameters in CNC. control, testing with machine cuts/machine cycles Plant: • Knowledge of machine tools electrically, • Knowledge of machine parameters and diagnostics, • Ability to run calibration programmes, • How to disconnect pumps & motors Essential: • A demonstratable background in maintaining 4/5 axis CNC milling machines, • Previous experience in cross functional team working, • Ability to understand engineering drawings Desirable: • Experience in a similar maintenance lead role, • Previous experience working night shifts, • IOSH/NEBOSH qualifications ? Competitive salary of circa £40,000 (Dependent on experience) + 38% - 58% shift allowance (Total salary circa £55,000) ? Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis ? Life Assurance 8 x salary ? 175 hours annual leave + bank holidays ? Income protection ? Shopping discounts ? Cycle To Work Scheme ? Employee Assistance Programme ? Virtual GP Clinic for you and immediate family ? A collaborative, dynamic working environment with significant opportunity to upskill As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? JBRP1_UKTJ

MERITUS are recruiting for a Digital Site Operations Manager to join our client in supporting IT/OT site relationships and procedures. We are not looking for somone who has specialist hands on IT experience, but someone from an IT background who can be a focal point of digital organising for a leadership team. DIGITAL SITE OPERATIONS MANAGER - INSIDE IR35 - £35 PER HOUR - FILTON, UK - 9 MONTHS - SINGLE STAGE INTERVIEW PROCESS This is a high-impact Digital leadership role embedded within one of the UK's most advanced aerospace manufacturing environments. Based at the Filton Plant - home to A400M wing assembly, A350 gear beam production, Wing Technology Development Centre and Additive Manufacturing capability - you will act as the senior Digital partner to plant leadership. The Opportunity You will own the Digital relationship with Operations. Not as support. As a strategic enabler. You will shape and deliver the plant Digital roadmap, protect operational continuity, drive digitalisation, strengthen OT cybersecurity posture, and ensure Digital investment delivers measurable production value. This is a role for someone who understands that in aerospace manufacturing: * Downtime is expensive. * Cyber risk is operational risk. * Legacy systems slow innovation. * Governance matters. * Change requires influence. What You Will Own * Full Digital stakeholder leadership for the Filton Plant * Site-level Digital roadmap aligned to production strategy * Demand management and prioritisation * Coordination of SAP, infrastructure, digital workplace and shopfloor deployments * OT cyber maturity improvement * Incident governance (RCA, PPS, MTTR reduction) * Supplier performance management * Legacy system decommissioning * Digital4Operations community leadership You will operate at the intersection of: * Operations * Maintenance * Cyber Security * IT/OT * Central Digital Product Lines What We're Looking For * Strong background in Digital/IT leadership within industrial manufacturing * Experience working in live production environments (aerospace preferred) * Exposure to IT/OT convergence * Understanding of operational cyber risk * Proven stakeholder management at senior plant level * Ability to challenge status quo and drive change JBRP1_UKTJ

B2 Licensed Engineer – UK CAA AW109/AW169 VHR is recruiting on behalf of a UK-based helicopter services and aviation company. The business is known for high standards in safety, quality, and reliability. Due to continued growth, they are looking for experienced B2 Licensed Engineers to join their team. Key responsibilities • Carry out and certify aircraft maintenance tasks, • Complete base and line maintenance activities, • Diagnose and rectify aircraft defects, • Ensure all work is completed in line with safety and regulatory standards Required skills and experience • Valid UK CAA B2 Licence, • At least 5 years of aircraft maintenance experience, • Strong technical knowledge and a safety-first approach, • Ability to work accurately and as part of a team Desirable skills • AW109 and/or AW169 type ratings, • Supervisory experience, with the ability to lead a small team of engineers and technicians What is offered • Competitive salary, • Overtime and allowances, • Private medical cover, • Type training available This is an excellent opportunity to join a respected aviation company and support a growing helicopter operation in the UK. Candidates with strong B2 experience and rotary-wing knowledge are encouraged to apply.

Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers.Our Western Approach site is a Centre of Excellence for the manufacture of wing spars for some of the world's most popular aircraft.Due to

Role: Mechanical Design Engineer Location: Bristol Rate: Negotiable Inside IR35 via Umbrella Duration: 12 months Our client is seeking a Mechanical Design Engineer to join a small, high-calibre engineering team developing next-generation on-wing engine inspection technologies and automation solutions. Key responsibilities: * Support mechanical engineering and production teams across a range of activities. * Create and update 3D CAD models and drawings. * Produce technical documentation, including SOPs, BoMs, QA and build notes. * Carry out mechanical testing, including thermal and robotic apparatus. * Support workshop activities, QA, 3D printing, and production jig design/setup. * Communicate clearly across technical and non-technical teams. * Travel occasionally within the UK to conduct product testing. Essential experience: * CAD and technical drawing experience. * Workshop skills, including basic power and hand tools. * Experience in a production environment with tooling and documentation. * Working in small, fast-moving engineering teams. * QA, engineering verification and validation experience. * Agile and lean-focused environm...

Wing Airframe Research and Technology DMU Integration Specialist Certain Advantage is hiring for a DMU Integrator based in the Filton area.This role is on a contract basis and is hybrid-based.The Company We’re working with a Manufacturing business that operates in the Aerospace sector.They des

On behalf of our client, we are seeking to recruit a Lead FEM Engineer on an initial 11 - month contract.As the Lead FEM Engineer you will contribute towards the success of a dynamic team responsible for the definition and delivery of FE loads strategy and enablement in support of Wing design soluti

Design Engineer Aircraft Structures (eVTOL) Bristol (Hybrid Working Available) £70,000 £90,000 Basic Salary + Benefits Our client, an innovative aerospace organisation at the forefront of next-generation electric aviation, is seeking an experienced Aircraft Structures Design Engineer to join their growing engineering team in Bristol. This is a rare opportunity to contribute to the development ofcutting-edgeeVTOLaircraft, supporting the design of primary and secondary structures including wing,empennageand fuselage assemblies. You will play a key role in shaping the future of sustainable aviation. The Role Responsibilities: * Design and develop composite and metallicaircraftstructures

Call quality gates for clean room and ensure quality gates are acceptable. At the forefront of aerospace engineering, we design and manufacture some of the most advanced wing structures in the industry — and we're looking for a meticulous Quality Inspector to help us uphold the standards that make

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Due to a continued growth in business,we have an exciting and career defining opportunity for aLevel 2 NDT Technicianto join the teaminWestern Approach. This site is an International Centre of Excellence in composite wing structure design and production, manufacturing composite wing spars and Fixed Trailing Edge assemblies for some of the world's most popular aircrafts. The successful applicant will inspect and evaluate the A350XWB and A400M carbon wing spars and their associated components throughout the manufacturing process. These inspections will utilize semi-automated and manual phased array and conventional pulse echo ultrasonic testing techniques. You will work a 7 day fortnight shift pattern 06:00am - 18:00pm as below - which includes 28% shift allowance: Week 1: Monday, Tuesday, Friday, Satuday, Sunday Week 2: Wednesday, Thursday How You'll Contribute In this position, you will carry out Semi-Automated, Manual Phased Array and Manual Pulse Echo Ultrasonic Inspection of carbon fibre composite wing spars and associated components. In addition to: • Compliance with all Health & Safety requirements, • Maintenance of aerospace quality standards, • Provide support as required to the NDT Level 3, • Communicate with customers and suppliers as required, • Have documented evidence of classroom training and work experience hours sufficient to gainEN4179 Level 2 qualificationin the Ultrasonic Inspection of carbon fibre composites, • Understanding of composite manufacture gained in the Aerospace industry, • Understanding and adherence to aerospace quality standards, • A Team player with the ability to work alone in the continuous improvement of NDT processes and documentation, • A Competitive salary + 28% Shift Allowance, • Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (GKN Contribution up to 12%), • Life Assurance 8 x salary, • 187.5 hours holiday + bank holidays, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We arethe place where human dreams, plus humanendeavour, shape the future of aerospace innovation and technology. JBRP1_UKTJ

Morson Edge are excited to support our client GKN Aeroapce who is recruiting for its new composite manufacturing and assembly facility at Western Approach. The facility will manufacture, test and assemble primary aircraft structure components, including A350 and A400M carbon wing spars. We are seeking people with composite material and aerostructures assembly experience to lead, develop and establish the latest technologies in this state of the art manufacturing facility. You could be part of this innovative business! Purpose: To measure aircraft components throughout the build process, to ensure parts are conforming to drawing tolerances. Carry out subsequent sub assembly and CNC automated activities, which meet design and engineering requirements. Knowledge and experience A good engineering problem solver. Proficient in the use of CAD software and Metrology software Ability to use Co-ordinate measuring Machines – Laser trackers Ability to use Microsoft Window packages – Word, Excel, and PowerPoint etc. Ability to read, understand and interpret engineering drawings and CAD, Experience in Geometric dimensioning & tolerancing (G,D&T) Assembly and trimming of components using conventional and advanced methods. Use of laser projector equipment, non destructive test (NDT) machines and jigged assembly techniques. Knowledge of aircraft bonded assemblies. Understanding of aircraft drawings, limits and quality systems. Self motivated and with good communication skills. Able to work in small teams led by Process Team Leaders. Served a recognised apprenticeship or relevant experience in composite or aircraft environment. Embrace lean manufacture, waste reduction and improvement initiatives. Work in accordance with Health & Safety requirements, including relevant risk, COSHH and safe systems of work. Undertake training in advanced composite assembly techniques & processes. First party certification to be allocated following successful completion of relevant training. Able to work shift patterns in line with operational requirements. Qualifications: Apprenticeship in a relevant discipline/Level 3 qulaification Working hours Average of 40.25 per week over a fortnight Week One Monday Tuesday Friday Saturday Sunday 6am -6pm half hour unpaid lunch- Week two Wednesday and Thursday 6am to 6pm half hour unpaid lunch JBRP1_UKTJ

Site Relationship Manager (Digital) - Filton Location: Filton - around 60% onsite, with flexibility Hours: 35 hours per week (4.5-day week between 07:00-19:00) Clearance: BPSS+ (arranged by Airbus) Pay: £26.16 per hour (PAYE) / £35.00 per hour (Umbrella) Working style: Hybrid (onsite presence required) Join us and shape the digital future of the Filton Plant Guidant Global is delighted to partner with Airbus to recruit a Site Relationship Manager (SRM) supporting Digital for Operations at the Filton Plant. This is a fantastic opportunity for someone who thrives on building strong relationships, influencing digital strategy, and supporting operational excellence in a complex manufacturing environment. As the SRM, you'll be the essential link between the Digital organisation and plant operations-acting as a trusted advisor, championing digital solutions, and ensuring the site receives exceptional support for digital products and tools. What you'll be doing You will play a strategic, visible, and highly influential role, including: Strategic partnership & stakeholder engagement • Build strong, trusted relationships with Filton Plant leadership and operational teams., • Represent the Digital function onsite, attending key routines and providing regular updates on digital performance, adoption, and value., • Coordinate and support the deployment of Digital products, ensuring the right stakeholders are engaged and risks/opportunities are managed., • Ensure smooth business continuity for all plant-critical digital solutions., • Challenge current ways of working and help drive change, simplification, and digital innovation., • Promote digitalisation, automation, and the removal of legacy applications., • Strengthen local cyber-security practices by supporting and developing the IT-in-OT team., • Ensure effective crisis management, including communication, root-cause analysis, and preventive actions., • Coach and develop Digital team members, including early-career talent., • Work closely with Digital Workplace, ERP/SAP, Infrastructure and other teams to ensure aligned delivery., • Contribute to resource planning, financial management, and supplier performance oversight. What you'll bring We're looking for someone who blends digital understanding with brilliant relationship-building skills: Essential experience • Experience working in large-scale industrial, engineering or manufacturing environments., • Broad understanding of digital products, tools, and processes., • Stakeholder management expertise with the ability to influence at all levels., • Strong communication skills, adaptable to diverse technical and operational audiences., • Knowledge of cyber-security practices (desirable but not essential)., • Confident building trust across teams., • Proactive, resilient, and comfortable leading in fast-moving environments., • Curious and forward-thinking with a continuous-improvement mindset., • A secure, resilient digital ecosystem, • Streamlined operations and improved productivity, • Successful digital transformation across the plant, • A collaborative, innovative digital culture What's in it for you? • A highly influential role at the heart of digital transformation, • The opportunity to impact operational excellence at a major Airbus site, • Hybrid working and a supportive onsite community, • Coaching and leadership opportunities within the Digital organisation, • A people-centred employer committed to inclusion and well-being Ready to make an impact? If you're passionate about digital innovation, experienced in manufacturing or industrial settings, and excited about building strong, meaningful partnerships, we'd love to hear from you. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy. JBRP1_UKTJ

Arden White are currently recruiting for a Reliability Engineer with a leading aviation company supporting commercial aircraft MRO operations on a global scale. The Reliability Engineer is a technically focused, data-driven engineering role where youll take ownership of reliability performance, lead root cause investigations, and deliver engineering solutions that directly impact fleet availability, cost efficiency, and operational performance. The Reliability Engineerwill act as a key interface between engineering, supply chain, OEMs, and airline customers, driving continuous improvement across component reliability and maintenance strategies. Responsibilities of the Reliability Engineer • Perform in-depth reliability analysis on aircraft systems and components, identifying trends in failures, removals, and operational disruptions, • Lead root cause analysis (RCA) activities on complex component failures, utilising engineering data, shop findings, and operational feedback, • Monitor and report on critical reliability KPIs such as MTBUR, removals per 1000 flight hours, NFF (No Fault Found), and repeat defects, • Develop and implement engineering solutions, retrofit programmes, and reliability improvement plans, • Define and optimise repair schemes, workscopes, and test plans in collaboration with MRO facilities and OEMs, • Conduct technical investigations with component manufacturers and airline operators to drive performance improvements and cost reductions, • Produce technical reports, business cases, and cost-benefit analyses to support engineering decisions, • Present findings and recommendations to senior stakeholders, customers, and suppliers, • Act as the technical representative in customer reliability and engineering review meetings, • Identify recurring issues and implement preventative strategies to improve on-wing time, • Degree (or equivalent) in Aerospace, Mechanical, Electrical Engineering or related discipline, • Proven experience in aircraft reliability engineering, MRO, or component engineering, • Strong understanding of aircraft systems (ATA chapters), component behaviour, and failure modes, • Experience with RCA methodologies (e.g. 5 Whys, FMEA, Fault Tree Analysis), • Ability to interpret technical documentation including CMMs, AMMs, engineering drawings, and OEM data, • Advanced data analysis skills (Excel, reliability tools, or similar), • Confident communicator with experience presenting to customers and senior stakeholders, • Commercial awareness with the ability to balance technical and cost-driven decisionsWhy This Role?, • Join a leading aviation organisation supporting major airline fleets, • Work on high-impact reliability projects with real operational value, • Exposure to global engineering teams and international customers JBRP1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. At our GKN Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic componentsand wing systems for a combination of both civil and military aircraft. GKN Aerospace are searching qualified fitters to express an interest in working with GKN to operate as multi-skilled, flexible workers to ensure maximum effectiveness and efficiency within our areas. We are anticipating further uptake in the coming months and will be in touch to any successful applicants. Successful applicants will have a wideknowledge of hand and machine tools used in the aircraft industry including: Precussion riveting Drill/Ream/Countersink in panels with Vanmar tools Setting structures in build jigs Deburring of structures Fettling using approved setting tools Treatment touch-up in localised areas on aluminium Use of CNC pillar drills (DONAU) Part Marking + Identifying Profile description: How You'll Contribute • Ensure parts are produced on a right first time basis, • Ensure that any calibrated equipment used is within date, • Responsible for the timely clearance of work phases using the SAP system, • Responsible for highlighting any non-conformance to the Process Team Leader, • Adhering to the requirements of the GKNAF Quality Procedures, • Accountable for Health & Safety requirements under Section 7 of the HASAWA 1974 Essential: • Must have a recognised indentured apprenticeship (level 3), • Export Control understanding and regulatory requirements, • Previous manufacturing experience in an aircraft production environment ? Starting salary of £35,304 rising to £36,750 once fully certified (after around 3 months) + shift allowance where applicable (up to 33%) + Up to 4% Bonus ? Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (totalling up to 20% pension contribution) ? Life Assurance 8 x salary ? 175 hours annual leave + bank holidays ? Income protection ? Shopping discounts ? Cycle To Work Scheme ? Employee Assistance Programme ? Virtual GP Clinic for you and immediate family ? A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! JBRP1_UKTJ

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. At ourFiltonsite in Bristol, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic componentsand wing systems for a combination of both civil and military aircraft. Our newMulti-skilled Maintenance Engineerwill join a friendly team who work effectively and efficiently on Process plant and machine tool breakdown and repairs, and knowledge and experience working on electrical and electronics systems. You will handle the planned scheduled maintenance and all associated tasks on both conventional and CNC machine tools and plant. This is a full-time, permanent position working 07:00am - 17:30pm on the following shift pattern (which includes 25% shift premium: Week 1:Monday, Tuesday, Friday, Saturday, Sunday Week 2:Wednesday, Thursday Week 3:Monday, Tuesday, Wednesday, Thursday How You'll Contribute In this role, you will: Maintain and diagnose faults on: Machine Tools/Plant: Production process plant & machinery Hydraulic and pneumatic systems including counter balance circuits, hydraulic clamping, hydraulic motors, rams, cylinders Machine alignments: Checking and correction of machine alignments Correction by changing parameters in CNC control, testing with machine cuts/machine cycles Plant: Chemical treatment and paint facilities, coolant systems, presses, ovens, pipe benders etc Electrical appreciation: Knowledge of process plant & machine tools as well as PLC programming & diagnostics In addition to: General Fabrication and machining Cleaning, driving, rigging, slinging & assisting with out of trade activity Work with sub contractors when required Demonstrate improvements to plant reliability and availability Inputting of job records using electronic data collection (CONCEPT) Job Qualifications To help us make a difference, youll bring your passion and expertise/ talent for what you do along with the following skills, experience, qualifications and attributes: Essential: • A technician level qualification (HNC/ONC or City & Guilds Part 3) and post apprenticeship experience in the maintenance of process plant & machine tools, • Experience working effectively and efficiently on process plant and machine tool breakdown and repairs, • Knowledge and experience working on electrical and electronics systems., • Understanding of Export Control and regulatory requirements, • Self-motivated, working without direct supervision, • Physically able to bend in and out of machines, • Two way communication, • Customer-focussed, • Team Working, • A Competitive salary + 25% Shift Allowance, • Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (GKN Contribution up to 12%), • Life Assurance 8 x salary, • 25 days holiday + bank holidays, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? JBRP1_UKTJ

Morson are recruiting for Skilled Fitters to work in Bristol for our prestigious client, at their site in Western Approach. Roles are also 6 months ongoing with poss temp to perm opportunity after 6 months PROFILE As a Skilled Composite Aircraft Fitter, you will be involved in working on a range of aircraft main wing assemblies and sub-assemblies from detail parts, whilst embracing appropriate assembly techniques, tools and fixtures, in accordance with the appropriate technical data and competencies. Assemble composite and metallic aircraft components in line with design and engineering requirements. KEY DELIVERABLES • Assemble and trim composite and metallic aircraft components • Drilling/Reaming/Countersinking of composite and metallic components • Set aircraft components in calibrated build jigs. • Deburring and under head radius of aircraft components and assemblies • Fettling using approved and calibrated setting tools • Use of nut runners and pre-set torque guns for bolting • Participate fully in local continuous improvement activities • Work in line with Health & Safety site requirements QUALIFICATIONS • Apprenticeship or NVQ3 or City and Guilds Level 3. • Minimum 3 years' relevant trade experience assembling aircraft components using drawings and processes. • If CV accepted will need to attend a Trade Test on site involving drilling, riveting and countersinking working with Composite KEY SKILLS • Ability to assemble and trim composite and ancillary materials to close tolerances • Good hand skills and co-ordination • Understand aircraft drawings, limits and quality systems • Ability to operate CNC machines and processes as required • Self-motivated team player with good communication and interpersonal skills • Ability to work both alone and in small teams • Ability and willingness to undertake training and understanding of composite manufacturing techniques and processes • To take responsibility to “self-certify” own work • Working knowledge of IT systems including SAP and Microsoft packages SHIFT PATTERN • Averaged 37.5 per week • 12/6.5 - Day Shift • Week 1: Monday, Tuesday, Friday, Saturday, 6am-6pm Sunday 6am–12noon • Week 2: Wednesday, Thursday 6am-6pm RATE PAYE • £23.04 once on shift (£18.43 PAYE on days whilst training, approx. 2 weeks) - Once stamp obtained (about 3 months) the rate goes up to £24.06 • £27.65 overtime in the week • £36.86 overtime weekends TPBN1_UKTJ

A leading aerospace recruitment firm is seeking a Wing Design Engineer in Bristol for a 10-month contract.

Dx and exposure to DMUi & SSCI activities would be an added advantage.

A leading aerospace firm in the UK is looking for an entry-level System Installation Stress Engineer to join their team in Filton.The role involves executing stress analyses, providing lifecycle support, and delivering essential outputs in compliance with safety standards.A Bachelor’s degree in Ae

A global aerospace leader is seeking a Team Leader at their Bristol site to lead a team of operators, ensuring a culture of operational excellence and continuous improvement.The successful candidate will manage performance, uphold safety standards, and develop team members.Candidates should have rel