Trabajos architectural designer en Wayne, New JerseyCrear alertas

Job Description We are seeking a Senior Architectural Designer to join our collaborative design team, working on highly detailed, high-end residential projects both locally and internationally. This role is ideal for an experienced designer with a strong command of interior architecture, residential detailing, and construction documentation, particularly within traditional and classically influenced architecture. Our projects often pair traditional architectural frameworks with a thoughtful mix of modern, traditional, and eclectic decorative elements and FF&E, so we are looking for someone who understands how architecture, interiors, millwork, materials, and furnishings come together as a cohesive whole. The Senior Architectural Designer will take significant ownership of projects from design development through construction, working closely with principals, architects, interior designers, consultants, contractors, fabricators, and craftspeople. This is a full-time, in-office/on-site position, five days per week. What You’ll Do • Lead the development of interior architectural plans, elevations, sections, reflected ceiling plans, and detailed construction documentation for high-end residential projects., • Develop sophisticated architectural details for millwork, cabinetry, paneling, moldings, doors, fireplaces, stairs, ceilings, stone, flooring, bathrooms, kitchens, and other custom interior elements., • Translate design concepts and precedent imagery into refined, technically accurate, and buildable architectural solutions., • Produce and oversee coordinated Design Development and Construction Document sets using AutoCAD and Revit., • Work comfortably within traditional and classically influenced architectural vocabularies, with an understanding of proportion, scale, profiles, materials, and detailing., • Collaborate closely with interior designers to integrate architecture with decorative schemes, finishes, lighting, fixtures, and FF&E, including projects that intentionally mix traditional and contemporary design elements., • Coordinate architectural drawings with structural, MEP, lighting, AV, landscape, interior design, kitchen, millwork, and other specialty consultants., • Review drawings and details produced by junior team members, providing direction, mentorship, and quality control., • Participate actively in design reviews and contribute thoughtful design and technical solutions., • Coordinate directly with contractors, fabricators, vendors, and craftspeople to resolve detailing and constructability issues., • Lead or support construction administration, including site visits, RFIs, submittal and shop drawing reviews, field coordination, punch lists, and resolution of construction issues., • Communicate confidently with clients, consultants, contractors, building departments, and other project stakeholders., • Maintain project schedules, finish and material schedules, drawing logs, specification information, and other project documentation., • Anticipate coordination issues and take ownership of resolving technical challenges throughout the project lifecycle., • Help maintain the firm's standards for drawing quality, detailing, documentation, and design execution. What You Bring • Seven or more years of professional architectural design experience, preferably with a high-end residential architecture, interiors, or multidisciplinary design firm., • A bachelor’s or master’s degree in architecture, interior architecture, or a related field., • A strong portfolio demonstrating high-end residential interior architecture and detailing., • Significant experience developing and documenting traditional, classical, or historically informed residential architecture., • A sophisticated understanding of how traditional architectural interiors can work alongside modern, traditional, and mixed-style decorative schemes and FF&E., • Advanced proficiency in AutoCAD and strong working proficiency in Revit., • Strong knowledge of residential construction methods, materials, millwork, stone, cabinetry, architectural finishes, and custom detailing., • Demonstrated experience producing highly coordinated Design Development and Construction Document packages., • Strong understanding of constructability and the ability to develop details from design concept through fabrication and installation., • Experience coordinating with architects, interior designers, engineers, contractors, fabricators, and specialty consultants., • Familiarity with building codes, permitting requirements, and approval processes; experience in New York and New Jersey is strongly preferred., • Substantial construction administration and field experience., • Excellent organizational skills and exceptional attention to detail., • Strong written, verbal, graphic, and presentation skills., • The ability to manage multiple priorities and project phases while maintaining a consistently high level of design and documentation quality., • The judgment and experience to work independently, make informed decisions, and recognize when issues require broader team input., • A collaborative, solutions-oriented approach and the ability to mentor and guide more junior team members. Why Join Us This is an opportunity to work on exceptional, highly crafted residential projects where architecture, interiors, decoration, and craftsmanship are considered at every level. You will have meaningful influence over the development and execution of projects, collaborate closely with a talented multidisciplinary team, and work directly with skilled consultants, contractors, fabricators, and artisans. We are looking for someone who appreciates both design refinement and technical rigor—a designer who can move comfortably between the overall character of a room and the precise profile of a molding, between historical precedent and contemporary living, and between an ambitious design idea and the drawings required to build it beautifully.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description CoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. What You'll Do: The Data Center Design team is the technical engineering team responsible for the architectural and infrastructure design standards across CoreWeave's global portfolio, ensuring facilities are highly scalable, efficient, and optimized to support next-generation, high-density compute workloads. The team governs the entire design lifecycle from early-stage site feasibility through final technology fit-out, establishing the foundation for seamless construction and long-term operational success. Through continuous technical innovation and standardization, they enable CoreWeave to rapidly and reliably scale its physical footprint to meet global infrastructure demands. About the role: As a Senior White Space Design Engineer, you will report to the Senior Manager, White Space Design and support the design and delivery of white space infrastructure across CoreWeave's expanding data center portfolio. You will serve as a senior individual contributor, applying deep technical expertise to develop designs, perform engineering analyses, review consultant deliverables, and resolve complex multidisciplinary coordination issues. You will work closely with internal engineering teams, third-party design consultants, Construction, Operations, Network Engineering, Supply Chain, and Commissioning to ensure white space solutions are scalable, standardized, constructable, and operationally sound. This is a hands-on engineering role for someone comfortable working through detailed technical challenges and driving designs from concept through construction handoff. In this role, you will: • Develop and review white space layouts, infrastructure designs, specifications, details, and engineering documentation., • Support the development, maintenance, and continuous improvement of CoreWeave's White Space Basis of Design, technical standards, and reference designs., • Perform detailed technical reviews of high-density power distribution, liquid- and air-cooling systems, equipment layouts, containment systems, and low-voltage pathways., • Design and coordinate white space electrical systems, including PDUs, RPPs, busways, branch circuits, rack power distribution, grounding, and associated infrastructure., • Design and coordinate white space mechanical systems, including remote CDUs, liquid-cooling distribution, fan walls, hot aisle containment, and other high-density cooling solutions., • Review structured cabling systems, ladder rack, cable tray, overhead conveyance, and network pathways in coordination with Network Engineering., • Review construction drawings, shop drawings, equipment submittals, RFIs, design changes, and field conditions for compliance with project requirements and CoreWeave standards., • Identify design gaps, constructability concerns, operational risks, and multidisciplinary conflicts, and develop practical solutions in collaboration with project stakeholders., • Provide technical direction and oversight to third-party design consultants to ensure their work meets project requirements, applicable codes, and CoreWeave standards., • Support projects during construction, commissioning, and deployment by responding to technical questions and resolving field-related design issues., • Participate in design workshops, coordination meetings, constructability reviews, and lessons-learned sessions., • Apply lessons learned across projects to improve design quality, repeatability, speed, and scalability., • Provide technical guidance and mentorship to other engineers while contributing to a collaborative, high-performing design organization.Who You Are:, • Bachelor's degree in Engineering (Mechanical, Electrical, Network, Low Voltage/Cabling, or related field)., • 7+ years of experience in data center design, mission-critical infrastructure engineering, or white space design leadership., • Direct experience with data center white space infrastructure systems, including PDUs, RPPs, busways, branch circuits, hot aisle containment systems, remote CDUs, fan walls, and high-density cooling strategies., • Experience working as a consulting engineer, design consultant, or owner's representative overseeing third-party design consultants., • Documented knowledge of low-voltage infrastructure systems, including structured cabling, ladder rack, cable tray systems, overhead conveyance, and network pathway coordination., • Documentation & Review: Experience reviewing and interpreting construction drawings, shop drawings, submittals, RFIs, and design change documentation., • Software Proficiency: Hands-on proficiency with engineering and project management tools, specifically AutoCAD, Revit, Bluebeam, Asana, Smartsheet, or equivalent platforms., • Industry Standards: Compliance and working knowledge of data center design standards and industry guidelines, including TIA-942, BICSI, ASHRAE, NFPA, and Uptime Institute. Preferred: • Professional Engineer (PE), Registered Communications Distribution Designer (RCDD), or Project Management Professional (PMP) certification., • Experience supporting hyperscale, High-Performance Computing (HPC), or high-density compute environments., • Practical familiarity with capacity planning, scalability modeling, and design standardization. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams – even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. • You love to own complex infrastructure projects end-to-end., • You're curious about improving scalability, reliability, and design efficiency., • You're an expert in whitespace design, low-voltage systems, and network infrastructure.Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $143,000 to $210,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE IN NEW JERSEY AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Electrical / Fire Alarm Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop electrical designs from architectural backgrounds, project criteria, and direction from AEP, • Develop electrical power distribution systems, including service, feeders, panelboards, transformers, disconnects, and branch circuits, • Perform electrical load calculations and service/load assessments, • Develop power plans and equipment connections, • Develop lighting and lighting-control designs where included in project scope, • Develop emergency and egress lighting systems, • Prepare electrical riser and single-line diagrams, • Size feeders, branch circuits, overcurrent protection, and related distribution equipment, • Create panel board schedules, • Coordinate electrical requirements for mechanical, plumbing, fire-protection, architectural, and specialty equipment, • Develop fire alarm system designs, layouts, riser diagrams, device requirements, sequences, notes, and specifications, • Prepare electrical and fire alarm plans, schedules, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop a coordinated electrical and fire alarm design without requiring every receptacle, circuit, panel, feeder, fire alarm device, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing electrical systems for buildings, • Professional experience designing fire alarm systems, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Experience with electrical load calculations and power-distribution design, • Knowledge of service sizing, feeders, panelboards, transformers, branch circuits, grounding, and overcurrent protection, • Knowledge of lighting, emergency lighting, and basic lighting-control requirements, • Working knowledge of fire alarm system design, notification, initiation, supervision, interfaces, and applicable code requirements, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the NEC, IBC, NFPA 72, applicable energy-code requirements, and the NYC Building and Electrical Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret the applicable code sections when asked., • Familiarity with NYC fire alarm requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing electrical services, distribution equipment, panels, transformers, lighting, fire alarm equipment, devices, and related building conditions, • Taking field measurements, photographs, panel information, equipment information, and existing load data, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of electrical design experience do you have?, • How many years of fire alarm design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop electrical and fire alarm designs from architectural backgrounds and project criteria?, • How familiar are you with the NEC, NFPA 72, and NYC electrical/fire alarm requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25 MILES OF WEST ORANGE, NJ AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Mechanical / HVAC Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. We will not consider candidates who are currently employed full-time elsewhere and are seeking side work or moonlighting opportunities. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities • Develop HVAC designs from architectural backgrounds, project criteria, and direction from AEP, • Perform heating and cooling load calculations, • Select and schedule HVAC equipment, • Develop ductwork layouts and sizing, • Develop air distribution systems, • Design ventilation and outside-air systems, • Coordinate mechanical systems with architectural, structural, electrical, plumbing, and fire-protection disciplines, • Prepare mechanical plans, schedules, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required Project Leadership / Client Coordination • Serve as the primary day-to-day technical and coordination lead for assigned projects, • Communicate directly with clients during design development and ask questions as needed, • Obtain, track, and organize required client design information and project correspondence, • Participate in client and coordination meetings, • Manage client and internal deadlines for the Mechanical, Plumbing / Fire Protection, and Electrical / Fire Alarm disciplines, • Manage assigned projects with a high degree of autonomy, with AEP copied, reviewing the work, and participating when needed What We Are Looking For Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing HVAC systems for buildings, • Strong AutoCAD/Revit skills, • Experience producing permit and construction-document drawing sets, • Working knowledge of HVAC load calculations (Trane Trace, Carrier HAP, RHVAC, etc.), • Experience with equipment selection and scheduling, • Knowledge of duct sizing, air distribution, ventilation, and basic controls coordination, • Familiarity with applicable mechanical, energy, building, and ventilation codes, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred., • Working knowledge of the IBC, IMC, ASHRAE 62.1, ASHRAE 90.1, and the NYC Building and Mechanical Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret the applicable code sections when asked., • PE licensure is not required for this position. Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing HVAC equipment, ductwork, controls, utilities, and related building conditions, • Taking field measurements, photographs, and equipment information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD and/or Revit software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of mechanical/HVAC design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop HVAC designs from architectural backgrounds and project criteria?, • What load-calculation software do you use?, • What hours are you generally available during the workday? . Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of mechanical/HVAC design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop HVAC designs from architectural backgrounds and project criteria?, • What load-calculation software do you use?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation? \nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE IN NEW JERSEY AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Fire Sprinkler Designer Full-Time, On-Site Our client is an established fire protection organization expanding its design capabilities to support a strong and growing project pipeline. This is an excellent opportunity for an experienced Fire Sprinkler Designer who wants to take ownership of meaningful projects, work alongside knowledgeable industry professionals, and continue advancing technically. The position offers substantial exposure to residential and multifamily construction, including mid-rise and high-rise developments, along with opportunities for increased technical responsibility and continued professional development. This Role Offers: • Competitive compensation based on sprinkler design experience, technical expertise, and certification., • Exposure to residential, multifamily, mid-rise, and high-rise fire protection projects., • An established design environment where experienced professionals can make an immediate impact., • Support for continued professional development, including advancement toward NICET certification. Focus: • Create detailed water-based fire sprinkler system designs that meet applicable codes, project specifications, and construction requirements., • Develop sprinkler layouts, design drawings, hydraulic calculations, and supporting project documentation., • Review architectural and construction documents to determine system requirements and identify potential design or coordination challenges., • Coordinate sprinkler layouts with building systems and other construction disciplines to support efficient installation., • Participate in BIM and 3D coordination activities when required by the project., • Update designs to account for field conditions, construction changes, coordination feedback, and comments from reviewing authorities., • Work closely with project managers, field personnel, engineers, contractors, and other project stakeholders throughout the design process., • Evaluate constructability and develop practical solutions that help field teams execute installations efficiently., • Manage multiple design assignments while maintaining accuracy, quality, and project schedules., • Provide technical guidance and knowledge sharing to developing members of the design team when appropriate. Skill Set: • Direct professional fire sprinkler system design experience, with the ability to independently perform sprinkler layout and design work without extensive entry-level training., • Strong understanding of water-based fire protection systems, sprinkler design practices, applicable NFPA standards, and construction documentation., • Ability to read and interpret architectural drawings, specifications, and related construction documents., • Residential or multifamily sprinkler design experience is strongly preferred, particularly involving mid-rise or high-rise construction., • NICET certification in Water-Based Systems Layout is preferred, with Level II representing a particularly strong match. Experienced designers without NICET certification may also be considered., • Experience with AutoSPRINK is highly desirable, although candidates with substantial experience using other established sprinkler design platforms may be considered., • Revit, BIM, and 3D coordination experience are additional advantages., • Strong communication and problem-solving skills with the ability to collaborate across design, project management, and field teams., • Ability to manage competing priorities while producing accurate and constructible designs., • Ability to work full-time on-site and currently reside in New Jersey or an immediately commutable location. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Job Description CoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. What You'll Do: The Data Center Design team is the technical engineering team responsible for the architectural and infrastructure design standards across CoreWeave's global portfolio, ensuring facilities are highly scalable, efficient, and optimized to support next-generation, high-density compute workloads. The team governs the entire design lifecycle from early-stage site feasibility through final technology fit-out, establishing the foundation for seamless construction and long-term operational success. Through continuous technical innovation and standardization, they enable CoreWeave to rapidly and reliably scale its physical footprint to meet global infrastructure demands. About the role: The Senior Manager, White Space Design leads the design of white space infrastructure and fit-out across CoreWeave's expanding data center portfolio. In this role, you will own the development and administration of the White Space Basis of Design while performing comprehensive technical reviews of infrastructure layouts, power distribution, and cooling configurations. You will act as both a hands-on technical expert and a manager of internal and external design resources, including third-party consultants. Additionally, you will collaborate daily with cross-functional construction and operations teams to ensure all designs are scalable, constructable, and seamlessly handed off for deployment. The Senior Manager, White Space Design owns the end-to-end design strategy, development, and administration of the White Space Basis of Design across CoreWeave's global data center portfolio. On a day-to-day basis, you will perform deep-dive technical reviews of infrastructure layouts, high-density cooling configurations (such as remote CDUs and containment systems), power distribution strategies, and low-voltage pathways to proactively eliminate gaps in coordination and constructability. You will act as a hands-on technical subject matter expert, balancing direct design production and engineering work with the management and mentorship of internal design engineers and external engineering consultants. Ultimately, you will drive daily cross-functional alignment with Construction, Operations, Network Engineering, and Commissioning teams to guarantee that all white space designs are scalable, operationally sound, and seamlessly transitioned from concept through construction handoff. Who You Are: • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related technical discipline, or equivalent practical experience., • 15+ years of experience in data center design, mission-critical infrastructure engineering, or white space design leadership., • Direct experience with data center white space infrastructure systems, including PDUs, RPPs, busways, branch circuits, hot aisle containment systems, remote CDUs, fan walls, and high-density cooling strategies., • Experience working as a consulting engineer, design consultant, or owner's representative overseeing third-party design consultants., • Documented knowledge of low voltage infrastructure systems, including structured cabling, ladder rack, cable tray systems, overhead conveyance, and network pathway coordination., • Documentation & Review: Experience reviewing and interpreting construction drawings, shop drawings, submittals, RFIs, and design change documentation., • Software Proficiency: Hands-on proficiency with engineering and project management tools, specifically AutoCAD, Revit, Bluebeam, Asana, Smartsheets, or equivalent platforms., • Industry Standards: Compliance and working knowledge of data center design standards and industry guidelines, including TIA-942, BICSI, ASHRAE, NFPA, and Uptime Institute. Preferred: • Professional Engineer (PE), Registered Communications Distribution Designer (RCDD), or Project Management Professional (PMP) certification., • Experience supporting hyperscale, High-Performance Computing (HPC), or high-density compute environments., • Practical familiarity with capacity planning, scalability modeling, and design standardization. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams – even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. • You love to own complex infrastructure projects end-to-end., • You're curious about improving scalability, reliability, and design efficiency., • You're an expert in white space design, Low Voltage systems, and network infrastructure.Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $177,000 to $237,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

This job is with Soho House, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community.Please do not contact the recruiter directly.Reporting to the Soho Farmhouse New York Project Director (and ultimately to the Americas Development Director), t

RPM's work with owners and sub-contractors after traumatic events such as a fire or flood to clean up and repair damage to residential and commercial property.As a RPM, you will manage the renovation, as well as control and communicate the budget effectively.This means you will spend a good deal of

The Assistant Project Manager will:.Assist Project Managers with day-to-day project administration and coordination.Support project planning, scheduling, budgeting, and reporting activities.Manage RFIs, submittals, change orders, and project documentation.Coordinate with subcontractors, suppliers, a

The Project Manager will be in charge of supervising the development of complex projects while observing pre-determined conditions (cost, quality, safety, timelines).The Project Manager will participate in defining the project's specifications, planning its implementation and drawing up its budget.T

Based on priorities set by Program Directors, the Project Manager is responsible for the successful execution of major product development projects.This position plans, coordinates and leads the execution of activities to ensure that the goals and objectives of the project are accomplished within th

Project Manager III (Switchgear).As a Project Manager III (Switchgear), you will manage and oversee all aspects of a project to ensure it is completed on-time and within budget.You are responsible for managing scope, cost, schedule, internal staffing and outside vendors.You will prepare reports for

Spencer Thomas Group (STG) is currently looking to add to our team of consultants under our HCM practice.Our client is looking for a Global Project Manager to oversee various global ADP HCM projects, including a global WFM implementation and other small ADP-related initiatives.Provide client-side pr

At ZOLL, we're passionate about improving patient outcomes and helping save lives.We provide innovative technologies that make a meaningful difference in people's lives.Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiop

Position Type: contract(c2c/1099/w2).Interview: phone followed by F2F.GC EAD, H4 EAD H1B and OPT- EAD accepted.PMO Lead to work with app development team and managers, project planning, cost estimates, risk, presentation skills and status reporting, lead full-life-cycle development, mentor junior te

Apex has an opportunity for an Agile Project Manager for a client in Roseland, NJ and Alpharetta, GA.Position: Agile Project Manager.Location: Roseland, NJ and Alpharetta, GA (hybrid 3 days a week).Duration: 6+ Month W2 Rolling Contract (Potential to Go Perm).This client has sales and marketing acro

We're looking for an experienced Project Manager with deep knowledge of fabrication and experiential builds.This is a senior individual-contributor roleno direct reportsbut you will be the point person and subject-matter expert for all fabrication-intensive projects.The right candidate is process-dr

Spencer Thomas Group (STG) is currently looking to add to our team of consultants under our HCM Project Management Practice.Our client is migrating from ADP Enterprise V5 to ADP Lyric.They are looking for a client-side Project Manager & Lyric SME to partner with Client and ADP teams throughout proje

Construction Multifamily Project Manager - North Jersey.Well-known developer local to New Jersey - self-performing their own construction and handle leasing/property management for their buildings as well.They have a steady project pipeline of multifamily projects including market-rate mixed-use res

STRUCTURAL integrates technology-driven solutions with specialty contracting services to improve, protect, and enhance the existing infrastructure of owners directly, and in partnership with designers and contractors. Ensure top-tier quality control in collaboration with designers and QC teams.

Strong working knowledge of architectural/engineering drawings and construction concepts.

Natural Resources Project Manager.Dewberry is currently seeking an experienced Natural Resources Project Manager for our Parsippany, NJ office to directly support one of our utility clients.This experienced professional will perform a variety of environmental tasks in support of the natural resource

JLL empowers you to shape a brighter way.Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients.We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful care

Dewberry is seeking a Project Manager to work on projects in the greater NYC metropolitan area.To qualify, candidates must have prior construction inspection experience on NYSDOT, NYSTA or NYC Public Agency projects and possess a Bachelor's Degree in Construction Management, engineering and/or NICET

Construction Project Leadership.We are seeking a skilled professional to lead our construction project management team.This leadership role involves overseeing project managers, ensuring the effective delegation of workloads, and maintaining a comprehensive project schedule.You will monitor deadline

Dewberry is seeking a Project Manager for its Parsippany, NJ; Mount Laurel, NJ; or King of Prussia, PA locations.The qualified individual will have the responsibility to manage multi-disciplined land development design projects and assist the department manager in managing client relationships, deve

JLL empowers you to shape a brighter way.Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients.We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful care

Essential Skills/Basic Qualifications:.Strong Project Management and Business Analysis experience with ability to drive the end to end delivery.Excellent analytical problem solving skills ability to review data and summarise outcomes.Strong Knowledge in Agile methodology and Agile best practices.Ab

Senior Project Manager, Supply Chain.Michael Kors is always interested in hearing from talented, globally-minded individuals with a passion for fashion.If you enjoy working in a creative, fast-paced environment, then we would love to hear from you!.You are a detail-oriented and proactive team player

Elmwood Park, New Jersey is seeking a Utility Project Manager to join our team.As a Project Manager specializing in utilities engineering, you will be responsible for leading and overseeing projects related to utility design, coordination, and construction.Manage and supervise utilities engineering

Job Description Must Have Technical/Functional Skills 15+ years in IT delivery with a minimum of 10+ years in a dedicated Project Manager role must have successfully led at least two large-scale, cross-functional projects to completion across different project types such as system migrations, digit

Location: Whippany, NJ (Hybrid).Type: Contract Duration: Long Term.Produce monthly reporting for Functions Technology Portfolio Governance Boards.Review monthly Initiative Governance Forum materials.Ensure portfolio is aligned to the Change Delivery Management (CDM) Risk and Policy Standards.Train P

STRUCTURAL integrates technology-driven solutions with specialty contracting services to improve, protect, and enhance the existing infrastructure of owners directly, and in partnership with designers and contractors.

Johnson Controls Job Opportunity.Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidl

The New Project Manager is responsible for the coordination and organization of resources, equipment, meetings and information to ensure that all new product launches are successful (e.Essential Duties and Responsibilities:.Coordinates all briefs and forecasts for new projects; manage components, bu

Leads and directs multiple complex, medium, and large-sized enterprise projects and programs simultaneously.Oversees all aspects of projects, including project intake, visioning, planning, scope, schedule, cost, risk, monitoring, quality, procurement, resource, communication, and stakeholder managem

Project Manager & JDE Distribution or Finance (Functional).Location Franklin Lakes, NJ - Onsite but must be ok Contract to hire.Need to have experience as Project Manager in managing JDE projects like Tools Upgrade, Version upgrade and implementation projects with onsite offshore model.Support Ana

Assistant Project Manager (Land Development).Advance your career by building what's next.At Bohler, our Assistant Project Managers are emerging leaders who balance technical expertise with project coordination, client interaction, and team mentorship.You'll gain the experience and confidence to mana

Sr IT Project Manager Financial Integration.Our Project Management practice group is currently seeking a Sr.IT Project Manager who has strong experience with Financial Implementations, to support one of our global Healthcare devices/Life Science clients, based out of Mahwah, NJ.Remote with 20% trave

CGMP Implementation Project Manager.This project involves the management and execution of approx.Good Manufacturing Practices (cGMP) for implementation.The timeline for completion is critical, with a target duration of 9-12 months, starting as soon as possible.The project manager will be responsible

About the Job Project Manager - Analytics.Role: Project Manager, Analytics.Emphasis is on end-to-end delivery of analysis and guiding junior staff.Interact with the client to understand the requirements and communicate / brainstorm solutions.Excellent communication skills to work with cross-function

Minimum 6 years of experience in ETL tools like Informatica using Netezza as the database.At least 5 years of experience in Data Design and architecture.At least 6 years of experience in ETL Designing, development and database components to support Datawarehousing and Business Intelligence.At least

At ZOLL, we're passionate about improving patient outcomes and helping save lives.We provide innovative technologies that make a meaningful difference in people's lives.Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiop