Autocad jobs in Linden, New JerseyCreate job alerts

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. November 3, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $89,700.00 - $162,150.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Position Overview: As a key member of the geotechnical design and value-engineering team, you will support subsurface investigations, foundation and excavation design, construction monitoring, and contractor support services across public and private infrastructure projects. You will collaborate closely with senior engineers, geologists, contractors and clients to ensure technically sound, cost-effective, and constructible solutions that align with project goals and regulatory requirements. Key Responsibilities: • Conduct subsurface explorations (soil borings, test pits), evaluate soil and rock mechanics, groundwater conditions, seismic risk and site suitability., • Assist in foundation engineering, support-of-excavation and retaining-structure design for commercial, industrial, retail, residential and public-sector developments., • Provide construction-phase services including QA/QC of earthwork, foundations, retaining systems, dewatering, and shoring; document field conditions and respond to contractor/agency feedback., • Bachelor’s (or Master’s) degree in Civil or Geotechnical Engineering or related discipline., • EIT (Engineer?in?Training) or ability/desire to pursue PE licensure., • Field and office experience in subsurface investigation, foundation/excavation design, and construction monitoring., • Proficiency with engineering software (e.g., AutoCAD, Microsoft Office) and strong written/verbal communication skills.

Company Overview: EKA Associates, P.A. is a leading civil engineering and land development consulting firm based in Scotch Plains, New Jersey. We specialize in delivering high-quality design solutions for residential and commercial development projects across the state. We are currently seeking an experienced and licensed Principal Civil Engineer to join our team and provide technical leadership within our engineering department. Position Summary: The Principal Civil Engineer will lead design efforts and oversee technical execution of land development projects, ensuring high standards of quality, code compliance, and client satisfaction. This individual will be responsible for guiding junior staff, managing engineering tasks independently, and coordinating with clients, agencies, and multidisciplinary teams. This is a leadership role requiring strong civil engineering knowledge, particularly in site design and stormwater management within New Jersey. Key Responsibilities: • Lead and review site design plans and civil engineering drawings for residential and commercial developments., • Oversee the preparation of comprehensive development plans including site layout, grading, drainage, erosion and sediment control, and detail sheets., • Conduct and evaluate soil permeability testing and logging., • Serve as the technical point of contact for clients and attend design and coordination meetings., • Ensure compliance with utility coordination requirements, NJDEP flood hazard regulations, and local resolution conditions., • Perform detailed stormwater management design utilizing industry-standard modeling software., • Prepare project documentation, cost estimates, and support permitting and regulatory submissions., • Mentor and guide junior engineers and drafters on technical design standards and best practices. Required Qualifications: • Active New Jersey Professional Engineer (PE) License, • Minimum of 5 years of hands-on civil engineering design experience., • Proficiency in AutoCAD and civil design tools, • Strong working knowledge of NJDEP regulations and New Jersey municipal development procedures, • Excellent verbal and written communication skills, • Proven ability to work both independently and in a collaborative team environment Compensation: • Salary Range 155k - 160k Year, • Bonus Opportunities, • Company Equity Opportunities Benefits: • Health Insurance, • Dental Insurance, • Paid Time Off, • Bonus Opportunities, • Company Equity Opportunities Schedule: • Monday to Friday, standard business hours Location Requirements: • Candidates must be able to commute to or relocate to Scotch Plains, NJ prior to starting employment.

Qualifications • Bachelor’s degree in Electrical Engineering, Architectural Engineering, or related field (preferred)., • 2–10+ years of electrical design experience within the MEP consulting industry., • Proficiency in Revit, AutoCAD; SKM and/or ETAP a plus., • Strong knowledge of NEC and electrical design fundamentals., • Ability to interpret construction documents and develop detailed electrical designs., • Excellent communication and collaboration skills., • EIT/PE license or pursuit of licensure is a plus Key Responsibilities • Design electrical systems including power distribution, lighting, emergency/standby power, UPS systems, grounding, and fire alarm., • Prepare electrical drawings, one-line diagrams, load calculations, panel schedules, and specifications using Revit and AutoCAD., • Perform short-circuit, voltage drop, conductor sizing, and arc-flash analysis (SKM/ETAP preferred)., • Coordinate designs with mechanical, plumbing, architectural, and structural disciplines., • Review submittals, RFIs, and shop drawings for accuracy and compliance with NEC and project requirements., • Participate in client meetings, site surveys, field investigations, and construction administration tasks., • Ensure designs meet applicable codes (NEC, NFPA, IBC), local jurisdiction requirements, and project standards., • Support senior engineers and project managers with design development and project delivery.

Job Description Window and Door Manufacturer in Central New Jersey is seeking a dedicated energetic team player with at least 5 years’ experience in AutoCAD. Applicants must have the ability to read and interpret construction documents (specifications, drawings, etc.). Must be able to work in a fast-paced environment to multi-task and work as a team player. Must have experience in AutoCAD 2024. Must understand woodwork. Must be able to collaborate with Project Managers to ensure drawing accuracy and consistency. Assist in preparing drawing packages for client submittals. Review and verify design documents for accuracy and completeness. Track and implement revisions based on redlines and field feedback. Ability to manage multiple projects to meet deadlines. Window/door experience a plus. Salary will be commensurate with experience level. If you would like to apply for the position, please submit samples of your drawings, email address, and your resume.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Optical Applications Engineer (Remote) Job Description: Avantier Inc., a premium high-precision custom optics manufacturer and innovative imaging solutions provider, is seeking an experienced Optical Applications Engineer to join our growing team. This is an exciting opportunity to deliver high-precision custom optical solutions to clients across industries such as AR/VR, Life Sciences, Biomedical, Aerospace, and more. Responsibilities: • Lead optical design and engineering efforts for new customer projects., • Collaborate with customers, the Sales team, and Sales Engineers to drive project success., • Assist the Sales team during technical calls with engineers., • Review and interpret customer optical systems using Zemax., • Develop and manage the production of marketing materials (online, electronic, video, and print)., • Create and deliver training materials for the Sales team and onboard new engineering team members., • Work closely with the marketing team on product launches and existing product enhancements., • Prioritize and manage multiple projects simultaneously.Requirements:, • Minimum of 5 years of experience in optical engineering, opto-mechanical systems, optical assembly, or optical metrology., • Expertise in optical lens fabrication, plastic optical materials, complex optical system designs, and tolerance analyses., • Proficiency in sequential and non-sequential ray tracing., • Strong knowledge of optical simulation software such as Zemax, CodeV, or LightTools., • Proven ability to perform comprehensive system-level performance analyses and develop detailed optical system specifications., • Deep understanding of the complete production lifecycle, from design to manufacturing., • Excellent written and verbal communication skills.Education:, • Bachelor's Degree (Required), • Major: Optical Engineering, Physics, Electrical Engineering, Mechanical Engineering or a related technical field., • Minimum Experience: 5 years of hands-on experience in optical design, product development, or applications engineering.Required Skills:, • Experience with Zemax, SolidWorks and AutoCAD., • Strong analytical and problem-solving abilities. This is a remote position.

Job Description Job Description POSITION: CAD Designer REPORTS TO: Project Engineering Manager OBJECTIVE: To be a valuable team member of VERREX providing drafting support to the Engineering Department and others to complete projects in a timely, professional manner. COMPENSATION: Salary, exempt (non-hourly), monthly cell phone stipend. BENEFITS: Verrex offers a comprehensive benefits package to support the health, well-being, and financial security of our employees. Benefits include: • Medical, dental, and vision insurance (VSP), • Company-sponsored 401(k) plan with matching contributions, • Company-paid life insurance and AD&D coverage ($50,000), • Long-term disability (LTD) insurance, • Optional supplemental life insurance available for purchase, • Healthcare and Dependent Care Flexible Spending Accounts (FSAs) RESPONSIBILITIES: • Be able to read and understand architectural drawings and extract information needed for the design and implementation of audiovisual systems., • Read and interpret wiring and schematic diagrams and develop an understanding of system fabrication and installation needs., • Ability to multitask across multiple projects with different project teams to meet various deadlines as set by project schedules., • Create drawings using company CAD platforms, primarily AutoCAD and/or Revit, under the direction of the Project Engineer, Project Manager or Account Executive, which depict wiring and architectural details needed, in accordance with Verrex Standards, Practices and Procedures., • Import, convert, and/or manipulate drawings received from clients, architects and/or consultants in order to facilitate their ease of use within a Verrex drawing package., • Create and maintain detail drawings which may include but are not limited to: mounting details, installation details, equipment details, rack requirements, etc., • Create and maintain accurate CAD blocks which conform with company standards in centralized storage system for continued use by yourself and others within the CAD and Engineering team., • Report on task progress in company tracking platforms, • Maintain a basic understanding of AV technology and the proper interfacing of components to be an active participant in system design with the Project Engineer., • Revise drawings using notes and “red lines” received from the Shop, Field Technicians, Project Managers and Engineers., • Maintain a comprehensive naming and storage scheme for archiving customer drawings for possible future use., • Creation of any other types of drawings that Management deems necessary for jobs or projects that Verrex is involved with., • Must show proficiency in use and understanding of AutoCAD, Bluebeam, Visio, Word, Excel, Microsoft Outlook, Adobe Acrobat and other applications required to perform drafting duties., • Proficiency in Revit is strongly preferred. This job description may be revised at any given time by Verrex Management. Employee Handbook Please refer to the Verrex Employee Handbook for company policies on such issues as employment wages, salary, benefits, services, reimbursable expenses, employee communications, safety, health, standards of conduct, and corrective action. Equal Opportunity Employer Statement Verrex is proud to be an equal opportunity employer. We are committed to creating an inclusive, respectful workplace where everyone can thrive.

Job Description Summary: The Manager of Engineering and Operations is responsible for managing daily engineering, construction, and operations activities related to tower assets, including new builds, structural upgrades, site maintenance, and tenant modifications. This role plays a vital part in supporting carrier deployments, maintaining asset integrity, and ensuring compliance with safety and structural standards. Essential Functions: Tower Engineering & Development • Review and process structural engineering analysis for new and existing towers, modifications, and collocations (including rooftops)., • Manage technical evaluations related to structural loading, mount mapping, and TIA-222 compliance., • Manage tower construction projects from planning through close-out, ensuring adherence to schedule, budget, and safety standards., • Develop and enforce scopes of work and construction standards for internal and vendor teams., • Coordinate closeout packages and project documentation for operations handoff., • Work closely with site acquisition, sales, leasing, and legal teams to support collocations and resolve engineering issues., • Assist with budgeting and forecasting of capital and operational expenses., • Support technical due diligence for M&A activity and third-party partnerships., • Attend internal and external meetings with carriers, vendors, municipalities, and consultants., • Perform additional duties as assigned. Required skills and qualifications: • Bachelor’s degree and/or a minimum of 3 years of experience in the telecommunications tower industry., • Knowledge of tower construction, structural analysis, and engineering best practices., • Familiarity with TIA-222 standards and FAA/FCC regulations., • Strong organizational and project coordination skills., • Experience with project management and tracking systems such as Siterra, SiteTracker, Smartsheets, or OneVizion., • Ability to manage multiple projects simultaneously with attention to detail and deadlines. Preferred skills and qualifications: • Direct experience in site acquisition processes, especially collocations., • Experience with rooftop assets and in-building DAS or small cell deployments., • Understanding of zoning, permitting, and environmental processes., • Prior experience supporting M&A or integration activities in the telecom industry., • Strong written and verbal communication skills. What We Offer: Targeted Salary Range: $85,000-$110,000 This compensation range is specific to the job level and takes into account the wide range of factors that are considered in making compensation decisions, including but not limited to: education, experience, licensure, certifications, geographic location, and internal equity. This range has been created in good faith based on information known to Diamond at the time of posting. Compensation decisions are dependent on the circumstances of each case. Diamond also provides a comprehensive compensation and benefits package which includes: • Comprehensive health benefits (Medical/Dental/Vision), • Retirement Plans with Company match, • Vacation Days, • Personal Days, • Floating Holidays, • Paid Holidays, • Life Insurance, • Disability Insurance & More! Location: • Diamond's office is in Springfield, NJ, approximately 17 miles west of New York City. The office is conveniently located close to I-78 and NJ-24. Work Environment: • Traditional office work environment., • Hybrid schedule: Four days in-office Diamond Communications is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law.

Job DescriptionSalary: $105,000-$150,000, commensurate with experience.with expericence Join Our Team: Senior Civil Engineer Design/Build Construction Firm REDCOM, LLC, an award-winning Design/Build Construction firm, is seeking aSenior Civil Engineer to join our dynamic Civil Engineering Department. We are a thriving team of 50 professionals located in a state-of-the-art facility just steps from downtown Westfield and the NYC train station. If youre an experienced Civil Engineer with a passion for land development, site plans, and drainage design, we want to hear from you! Why REDCOM? • Award-Winning Facility: Designed by our own team and located in the heart of Westfield., • Prime Location: Walking distance to downtown Westfield and NYC trains. As a Senior Civil Engineer, youll play a pivotal role in driving successful project outcomes. Your responsibilities will include: • Client Relations: Foster strong, professional relationships with clients., • Site Plan Design: Lead the design and development of comprehensive site plans, including all associated report preparation., • Regulatory Compliance: Ensure all designs meet state, municipal, and county guidelines and agency requirements., • Approval Process Management: Facilitate the approval process across multiple agencies, including engineering cost estimates and coordination with outside design professionals., • Team Leadership: Mentor and train junior engineers, guiding them through site plan design and approval processes., • Experience: 10+ years in land development, civil site plans, and drainage design., • Technical Skills: Proficiency in AutoCAD and drainage software (e.g., HydroCAD)., • Leadership Ability: A passion for mentoring and developing younger engineers., • Client-Facing Skills: Ability to manage relationships with various stakeholders and navigate complex approval processes., • Strong background in drainage and hydrology design., • Positive Attitude: A can-do approach to every challenge., • Excellent Communication: Strong written and verbal skills with attention to detail and follow-through., • Full-time, long-term position REDCOM invests in employees' health by offering a robust health benefits package that includes medical, dental and vision options. In addition, employees can choose from several voluntary benefits selections such as Long and Short Term Disability plans, Life Insurance, Cancer care and other options. In addition, REDCOM invests in well-being with access to discounted fitness programs, gym memberships and health and beauty options through our wellness program, allowing employees to choose options that meet their personal interests, located close to their homes or work. While we appreciate and value our staffing partners, we do not accept unsolicited resumes from agencies.REDCOMwill not be responsible for paying agency fees for any individual as to whom an agency has sent an unsolicited resume.

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Mechanical Engineer to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days., • Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilizing advanced CAD software to create detailed 2D and 3D models., • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to strictly comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and cutting-edge design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Requirements: Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software or mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment.

Job DescriptionAt ANS, we're not just a consulting engineering firm—we're a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Firm by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we're proud of what we've built and where we're headed. We're allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! We are seeking a motivated and driven Construction Inspector to join our team out of the South Plainfield, NJ office! We are looking for candidates who want to build a career with an emerging team of vibrant, career-oriented, and collaborative engineers, geo-professionals, and office staff. Family owned and operated, we pride ourselves on providing a premier work environment for our staff – highlighted by the recent inclusion on the NJBIZ Best Places to Work list (#6 overall across all industries). This role will mostly be in the field on job sites, but will also require time in the office to help prepare and/or review construction documents and reports. When not on site, your role will have the flexibility to work partially remotely (hybrid) from our South Plainfield, NJ office.“Must-have” qualifications and attributes: • Bachelor’s degree in engineering, Architecture, Construction Management, or related field; or 1–5 years of relevant construction inspection experience with a HS Diploma/GED; or a combination of education and experience, • Valid U.S. driver’s license and reliable transportation, • Ability to interpret construction drawings, specifications, cost estimates, and reports, • Foundational knowledge of construction techniques, methods, and materials, • Strong communication and problem-solving skills with a proactive, “get-it-done” mindset, • High attention to detail with strong organizational, teamwork, and coordination skills, • Excellent written, visual, and verbal communication skills, • Ability to prepare field and inspection reports in a timely and professional manner, • Professional presence and ability to interact respectfully and effectively with clients, contractors, and colleagues, • Self-motivated, accountable, and able to manage tasks from start to finish with minimal supervision, • Physically capable of working outdoors in varying conditions, including lifting up to 50 lbs and climbing ladders or scaffolding as required, • Proficiency in Microsoft Office (Word, Excel, Outlook, etc.)“Nice-to-have” experience and certifications:, • Prior experience in construction inspection or quality control on civil/structural projects, • Field experience with one or more of the following: compacted fills, concrete foundations, deep foundations (including piles or piers), solar tracker systems, site utilities, retaining walls, and structural steel, • Familiarity with relevant codes and standards, such as IBC, ACI, AISC, and ASCE, • OSHA 10-Hour Construction Safety certification, • ACI Concrete Field Testing Technician or Concrete Construction Special Inspector certification, • Familiarity with AutoCAD or similar drafting softwareWhat You'll Do:, • Join a dynamic team of engineers and inspectors working across solar, civil, and structural markets, • Monitor on-site construction activities—particularly related to solar tracker foundation installation, structural elements, and load testing—for compliance with plans and specifications, • Perform field inspections, materials testing, photo documentation, and hand sketches to record work in progress, • Maintain detailed daily field logs and prepare progress reports to document construction observations, • Track materials received or used, quantities installed, and document any non-conformance issues, • Represent the firm as the on-site inspector, assisting with change orders, RFIs, shop drawings, and as-built documentation, • Help prepare or review cost estimates, bid packages, and construction records, • Maintain organized project files, drawings, and records throughout the lifecycle of the assignment

Job DescriptionFrench & Parrello Associates (FPA) is seeking a Municipal Project Manager for our Newark, NJ office. Responsibilities • Manage all phases of municipal engineering projects, including scope development, budgeting, design, permitting, and construction administration., • Serve as the primary point of contact for municipal clients, ensuring effective communication and strong client relationships., • Lead and coordinate multidisciplinary project teams, including civil, structural, environmental, and utility engineers., • Prepare and review technical reports, design plans, specifications, and cost estimates., • Oversee project schedules, budgets, and quality assurance processes., • Assist in the preparation of proposals, qualifications packages, and presentations for new project opportunities., • Ensure compliance with local, state, and federal regulations and permitting requirements., • Provide mentorship and technical guidance to junior engineers and designers., • Bachelor’s degree in Civil Engineering or related field; Master’s degree preferred., • Professional Engineer (PE) license required., • 8+ years of progressive experience in municipal engineering, with demonstrated project management responsibilities., • Proven experience in the design and management of municipal infrastructure projects such as roadways, water distribution, sanitary sewer, and stormwater systems., • Strong knowledge of applicable municipal design standards, permitting processes, and funding programs., • Excellent project management, communication, and leadership skills., • Proficiency in engineering and design software such as AutoCAD Civil 3D and Microsoft Office Suite; familiarity with GIS a plus. We understand that a fulfilling career is about more than just the work you do – it’s about feeling secure in your health, confident in your financial future, and balanced in your personal and professional life. That’s why we strive to offer one of the most comprehensive benefits packages in our industry. By doing so, we aim to attract top talent and ensure that every member of our team has the resources they need to thrive, both at work and at home. • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching, • Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance, • Health Wellness Programs, Flu shots, Rewards for Healthy Lifestyle, • Tuition Reimbursement, • Training and Professional Development, • Opportunities for Community Outreach Through Internal Networks, • Personal Time Off Program (PTO), • Transit/Parking Program, • Flexible Summer Work Schedules, • Aflac, • Discount Tickets: Tickets At Work, LifeMart, and Staples Work Wins, • Credit Union, • Verizon Wireless Discount, • Dry Cleaning Service, • Corporate Events, Outings & Activities Compensation The projected compensation range for this position is $115,00 to $150,000. Actual compensation will depend on factors such as experience, education and skill set. Who We Are We value curiosity, accountability, and continuous learning – and we provide the tools, mentorship, and flexibility to help every team member reach their full potential. We’re looking for talented, driven professionals who share our passion for pushing boundaries and creating solutions that make a real difference in people’s lives. At FPA, we’re proud to be recognized year after year as one of NJBIZ’s Best Places to Work, and consistently ranked among the top firms in the industry. These honors reflect our people-first culture, collaborative spirit, and commitment to innovation and excellence. At FPA, you’ll find more than a job – you’ll find purpose, connection, and a workplace that invests in your growth and success. Engineering and Consulting Since 1974 For over 50 years, French & Parrello Associates (FPA) has been a trusted partner in delivering innovative solutions that shape communities, enhance infrastructure, and drive progress. As a multidisciplinary firm, we integrate expertise across diverse markets to streamline project execution, optimize resources, and achieve cost-effective, forward-thinking results. FPA combines boutique-level service with enterprise-level expertise – offering clients the best of both worlds. With a steadfast commitment to quality, collaboration, and innovation, our team continues to shape the built environment with solutions that stand the test of time.

Job DescriptionJob Title: Electrical Engineer – Power Distribution SystemsJob Type: Full-Time/Direct Hire Job Summary:We are seeking a skilled and detail-oriented Electrical Engineer with expertise in power distribution systems and strong proficiency in Revit and AutoCAD. The ideal candidate will play a key role in designing, developing, and implementing electrical systems for a wide range of commercial, industrial, and/or institutional projects. This role requires a collaborative team player who understands industry codes and standards and can deliver quality electrical designs that are efficient, code-compliant, and cost-effective. Key Responsibilities:Design and develop electrical power distribution systems, including low and medium voltage systems.Prepare electrical plans, schematics, single-line diagrams, and construction documents using Revit and AutoCAD.Coordinate with architects, structural, mechanical, and civil engineers throughout the design and construction process.Perform load calculations, equipment sizing, and circuiting based on NEC and other applicable codes.Participate in field surveys, site visits, and construction administration activities as needed.Review submittals, respond to RFIs, and assist with troubleshooting during construction phases.Ensure designs meet client requirements, project budgets, and timelines.Stay current with emerging technologies and industry standards in electrical engineering and building systems. Requirements:Bachelor’s degree in Electrical Engineering or related field.3–5+ years of experience in electrical system design, specifically power distribution.Proficiency in Revit and AutoCAD is required.Knowledge of applicable codes and standards such as NEC, IEEE, NFPA, and local building codes.Strong written and verbal communication skills.Ability to work both independently and within a multidisciplinary team.EIT certification is preferred; PE license is a plus. Preferred Experience:Experience working on commercial, healthcare, educational, or industrial building projects.Familiarity with lighting, fire alarm, grounding, and emergency power systems.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Free food & snacks, • Health insurance Ideal candidate should possess the following: • Relevant experience in the industry (preferred at least a couple of years of work experience)., • Interest in concrete, steel, and foundation design, as well as Mechanical means and Methods for construction., • Experience with working with a team in a fast-paced environment and handle multiple projects and deadlines at once., • Working independently with little to no supervision while also providing communication internally with peers as well as external communication with clients. Additionally, Interested candidates should have experience with drafting software (AUTOCAD 2d/3d), Structural analysis software, (RISA preferred) , Solid Modeling software (Inventor), math programs, etc. Familiarity with structural steel design codes (LRFD / ASD), Wind / Seismic Codes, and or NYC Building Codes would be a bonus. Company Overview Patuxent Engineering, LLC provides construction engineering and support services in the high-rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job Description Company Overview: We are a leading engineering and surveying firm dedicated to delivering innovative and high-quality solutions to public and private sector clients. Our commitment to excellence and our strong relationships with public agencies such as NJDOT, municipalities, the Port Authority of NY & NJ, NYDOT, and the NJ Turnpike Authority, drive our success and growth. Job Summary: We are seeking a highly motivated and experienced Survey Project Manager to join our team in South Plainfield, NJ. The ideal candidate will have a strong background in survey project management, with proven experience writing proposals and managing projects for public agencies. A Professional Land Surveyor (PLS) license in New Jersey or New York is required. Key Responsibilities: • Lead and manage survey projects from proposal through completion, ensuring all projects are delivered on time, within scope, and within budget., • Develop and write comprehensive project proposals, including scope, budget, and schedule, tailored to the requirements of public agencies such as NJDOT, municipalities, the Port Authority of NY & NJ, NYDOT, and the NJ Turnpike Authority., • Coordinate and communicate effectively with clients, regulatory agencies, subcontractors, and team members., • Conduct site visits and oversee fieldwork to ensure accuracy and compliance with project specifications and regulatory standards., • Prepare and review technical reports, maps, plats, and other documentation., • Ensure all project deliverables meet company standards and client expectations., • Maintain and strengthen relationships with existing clients and pursue opportunities for new business development., • Bachelor's degree in Surveying, Geomatics, Civil Engineering, or a related field., • Professional Land Surveyor (PLS) license in New Jersey or New York is required., • Minimum of 5 years of experience in survey project management, with a focus on public agency projects., • Proven experience in developing and writing successful project proposals for public agencies., • Strong knowledge of survey methodologies, equipment, and software., • Excellent organizational, communication, and leadership skills., • Ability to manage multiple projects simultaneously and meet deadlines., • Proficiency in AutoCAD, Civil 3D, and other relevant software., • Experience working with NJDOT, NYDOT, Port Authority of NY & NJ, NJ Turnpike Authority, and local municipalities., • Strong understanding of state and local regulations, standards, and procedures., • Competitive salary commensurate with experience, • Comprehensive health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Professional development opportunities Interested candidates are invited to submit a resume detailing their relevant experience and qualifications to Zach Redenbaugh at with the subject line "Survey Project Manager Application – [Your Name]".

Job Description Job Overview: A large Manufacturing plant in NJ is looking for a Senior Industrial/Process Engineer to lead efforts in optimizing production systems, improving workflows, and driving technical process innovations across our high-volume manufacturing plant. This role combines hands-on engineering expertise with strategic leadership, ensuring that operations run efficiently, safely, and at scale. The ideal candidate should bring strong technical capability, design and optimize facility layouts to maximize space utilization, streamline material flow, and support scalable production, and the ability to guide teams through continuous improvement initiatives. Key Responsibilities:  Analyze production schedules, workflows, and system specifications to maximize throughput, efficiency, and quality.  Design and optimize facility layouts, focusing on space utilization, equipment placement, and material flows.  Drive process upgrades, automation, and system enhancements.  Define and enforce technical and production standards with cross-functional teams.  Implement control systems that reduce downtime, cost, and variability.  Prepare cost models, equipment specifications, and capital expenditure justifications.  Act as a technical leader for the Continuous Improvement (CI) team, mentoring engineers and operators.  Train staff on new technologies, standards, and best practices.  Promote a data-driven, problem-solving culture across the plant. Qualifications:  Bachelor’s degree in industrial/Process Engineering or related field (required).  Significant experience in manufacturing process design, optimization, and improvement.  Advanced knowledge of production machinery, automation, and system layouts.  Strong technical skills, including, MS Office, and process modeling tools (with AutoCAD optional).  Proven ability to lead technical projects and elevate team capability.  Excellent analytical, communication, and leadership skills. Company DescriptionRecruiting CompanyRecruiting Company

Job DescriptionFor over 25 years, Haddad Plumbing & Heating Inc. has been setting the standard for plumbing and HVAC services in New Jersey, NYC, and Westchester County. With a proven track record in mid- and high-rise buildings, we know that our success is built on the quality of our people. If you're a driven, detail-oriented professional, this is a fantastic opportunity to grow your career in an industry that’s built for long-term success. Why You’ll Love Working Here • Access to a supportive leadership team and a culture that values your contributions, • A collaborative environment where you work closely with cross-functional teams, • Opportunity to grow within a company that promotes from within, • Stability and legacy over25 years strong with more to come, • Prepare accurate bids for HVAC and plumbing projects based on plans and specifications, • Manage the full bid process from initial estimation to customer follow-up, • Assemble and maintain submittal packages for projects, • Communicate directly with customers, sales teams, and internal personnel, • Provide customer assistance and equipment selection guidance, • Stay up to date on the latest products and industry trends, • Minimum 2-year degree and 5+ years of experience in HVAC or plumbing estimation, • Proficiency in Bluebeam, AutoCAD, Microsoft Office, and the ability to read and interpret blueprints, • Previous experience in HVAC or plumbing design is a plus, • Familiarity with a wide range of HVAC/plumbing equipment, materials, and installation methods BVXSYvfnOF

Job DescriptionAt ANS, we're not just a consulting engineering firm—we're a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Firm by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we're proud of what we've built and where we're headed. We're allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Weare seeking an experienced High Voltage Senior Structural Engineer with a specific focus on high-voltage substations and electrical infrastructure. This individual will be responsible for managing and executing structural scopes for substation projects from concept through IFC, including design of foundations for control enclosures, transformers, breakers, dead-ends, and other major HV equipment. This role requires a strong familiarity with structural requirements unique to substations, including coordination with electrical teams, vendor specifications, foundation optimization, and document production aligned with milestone submittals. You'll play a key role in shaping and scaling our HV structural team and supporting utility and interconnection projects for renewable energy clients. Technical Leadership & Oversight: • Lead structural engineering efforts for utility substation projects including control enclosures, transformer foundations, dead-end structures, capacitor banks, and static masts, • Review project documents and develop structural Basis of Design (BOD), including loads, design codes, geotechnical inputs, and material assumptions, • Design and size shallow and deep foundations (e.g., spread footings, drilled piers, embedded posts) based on geotechnical recommendations and equipment loads, • Perform load calculations (dead, live, wind, seismic) and develop structural models using accepted FEA tools (e.g., RISA, RAM, STAAD), • Coordinate with geotechnical engineers to integrate foundation performance assumptions and loading capacities (e.g., LPILE, MFAD inputs), • Prepare structural drawings, elevations, details, and specifications using AutoCAD and/or Revit for each milestone (30%, 60%, 90%, IFC) Client & Vendor Coordination:, • Coordinate with electrical engineers, control enclosure vendors, transformer manufacturers, and structure suppliers to obtain and interpret structural performance requirements, • Support client-facing meetings to present a design approach and resolve technical comments, • Review vendor-supplied structural performance requirements and incorporate into foundation and anchorage design, • Respond to RFIs and submittals related to structural foundations, design assumptions, and special inspections Other Areas of Focus:, • Provide input on internal design standards, templates, and QA/QC processes for substation projects, • Assist in developing resource plans, scopes, and estimates for future HV structural projects, • Serve as a technical mentor to junior structural engineers working on electrical infrastructure, • Collaborate with civil and geotechnical teams to ensure fully integrated substation site design, • Stay current on relevant codes (IBC, ASCE 7, NESC, etc.), utility standards, and AHJ requirements Qualifications:, • Professional Engineer (PE) license (required), • Bachelor’s degree in civil or Structural Engineering (Master’s preferred), • 8+ years of structural engineering experience, including at least 3–5 years specifically supporting high voltage substations or transmission infrastructure, • Proficiency with structural design software (e.g., RISA, RAM, STAAD, or equivalent FEA tools), • Proficient in AutoCAD; Revit experience a plus, • Strong understanding of applicable codes and standards (IBC, ASCE 7, NESC, IEEE, utility-specific structural criteria), • Experience with interpretation of geotechnical reports and integration of foundation parameters (bearing capacity, LPILE, corrosion, etc.), • Excellent communication, coordination, and client-facing skills

Job DescriptionFrench & Parrello Associates (FPA) is seeking a Municipal Engineer for our offices in Newark and Wall, NJ. Responsibilities: • Performs office and field engineering work involved in the planning, scoping, designing, permitting, and rehabilitating or constructing roads, intersections, streetscapes, site/civil improvements, water supply systems, sanitary sewer collection and conveyance, stormwater management, parks and recreation facilities, public buildings, and grounds improvements., • Familiar with New Jersey Administrative Codes, Local Public Contracts Law, and Municipal Land Use codes and regulations., • Experience with client and stakeholder engagement, and providing customer service in a professional, technical, and timely manner., • Familiar with Planning and Zoning regulations, requirements and protocols and procedures, • Able to perform calculations, prepare graphs, tables, and curves, and prepare letters, memoranda, and reports., • Review and compile information from technical engineering manuals and reports to develop solutions., • Prepare conceptual, preliminary, and detailed design drawings on routine projects from surveys, specific instructions, notes, sketches, and other reference material., • Review developer applications from land use boards, site plans, subdivision plans, stormwater calculations, and grading plans for compliance with Municipal codes and standards, county, state, and federal regulations (as applicable), and conducts business in accordance with best engineering practice., • Prepare development bond estimates, determine inspection fees, schedule inspection staff, monitor status of bonds, review bond reductions / releases, and perform administrative duties related to land development projects., • Oversee preparation and maintenance of municipal maps, record drawings, and other official records., • Assist with preparation of resolutions, ordinances, ordinance amendments, assessments, memoranda, reports, presentations, and public correspondence., • Familiar with pavement and other infrastructure evaluations and preparation of management reports, cost estimates and schedules., • Familiar with NJDEP (and other state regulatory agencies as applicable) rules and regulations inclusive of Tier A MS4 stormwater permits and annual compliance requirements., • Responsible for the coordination and management of multiple tasks and projects simultaneously., • Ability to evaluate and review challenging engineering matters in office or field and to develop appropriate solutions and remedies using innovative ideas and creative thinking., • Ability to prepare clear, technically sound, and informative reports, statements, findings, and recommendations., • Ability to establish and maintain effective working relationships with public officials, clients, employees, regulatory agencies, consultants and partners, utility companies and the public., • Bachelor of Science Degree in Civil or Environmental Engineering, or a related field, from an ABET accredited four-year college or university., • Five (5) plus years of related Civil Engineering work experience serving municipal, county or state governments, and other public agencies., • Licensed Professional Engineer (NJ, NY and/or PA) or ability to acquire PE through reciprocity., • Excellent problem-solving skills and a willingness to learn., • Strong communication and interpersonal skills., • Organizational skills related to office records, field documents, and correspondence., • Ability to work effectively in a team and adapt to a dynamic work environment., • A passion for contributing to environmentally sustainable solutions and familiar with the seventeen (17) world Sustainable Development Goals., • Thorough knowledge of the principals, practices, modern methods, techniques of civil engineering related to preparing plans, specifications, designs for and inspection of public improvement construction projects., • Comprehension of hydraulic analysis and design pertaining to water, sanitary sewers and storm sewer systems and hydraulic modeling experience a plus., • Detailed knowledge of Municipal Land Use Law, Local Public Contracts Law, NJDEP regulations, NJDOT standards, AASHTO, and MUTCD., • Fundamental knowledge of ESRI GIS systems and proficiency in AutoCAD Civil 3D design and drafting plans., • Certified Municipal Engineer (CME) certification through the NJ Municipal Engineering Institute., • Master of Science Degree in Civil or Environmental, or a related field, from an ABET accredited college of university., • Membership and active participation in professional societies and associations in the Municipal, water, wastewater, bridges/highways, or stormwater fields. Benefits We understand that a fulfilling career is about more than just the work you do – it’s about feeling secure in your health, confident in your financial future, and balanced in your personal and professional life. That’s why we strive to offer one of the most comprehensive benefits packages in our industry. By doing so, we aim to attract top talent and ensure that every member of our team has the resources they need to thrive, both at work and at home. • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching, • Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance, • Health Wellness Programs, Flu shots, Rewards for Healthy Lifestyle, • Tuition Reimbursement, • Training and Professional Development, • Opportunities for Community Outreach Through Internal Networks, • Personal Time Off Program (PTO), • Transit/Parking Program, • Flexible Summer Work Schedules, • Aflac, • Discount Tickets: Tickets At Work, LifeMart, and Staples Work Wins, • Credit Union, • Verizon Wireless Discount, • Dry Cleaning Service, • Corporate Events, Outings & Activities Compensation The projected compensation range for this position is $115,000 to $175,000. Actual compensation will depend on factors such as experience, education and skill set. Who We Are We value curiosity, accountability, and continuous learning – and we provide the tools, mentorship, and flexibility to help every team member reach their full potential. We’re looking for talented, driven professionals who share our passion for pushing boundaries and creating solutions that make a real difference in people’s lives. At FPA, we’re proud to be recognized year after year as one of NJBIZ’s Best Places to Work, and consistently ranked among the top firms in the industry. These honors reflect our people-first culture, collaborative spirit, and commitment to innovation and excellence. At FPA, you’ll find more than a job – you’ll find purpose, connection, and a workplace that invests in your growth and success. Engineering and Consulting Since 1974 For over 50 years, French & Parrello Associates (FPA) has been a trusted partner in delivering innovative solutions that shape communities, enhance infrastructure, and drive progress. As a multidisciplinary firm, we integrate expertise across diverse markets to streamline project execution, optimize resources, and achieve cost-effective, forward-thinking results. FPA combines boutique-level service with enterprise-level expertise – offering clients the best of both worlds. With a steadfast commitment to quality, collaboration, and innovation, our team continues to shape the built environment with solutions that stand the test of time.

Job Description Electrical Engineer – Iselin, NJ Direct Hire/ Permanent Placement $90k – $150k Base, 1st year onsite and then hybrid schedule, Full benefits, 401k THE CLIENT Multi-disciplinary Engineering Consultancy with their hands in numerous fields and building types: Residential, Commercial, Healthcare, Mission Critical, K-12, Higher Ed, Restaurant, Warehouse, etc. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, fire alarm in accordance to NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators, • Large scale and Complex building projects, • Project Management, • Site visits, Site Surveys, respond to RFIs, and reviewing shop drawings, • Revit, AutoCAD, SKM, COMCheck, AGI 32, • Degreed BSEE BSAE or equivalent, • EIT, PE, LEED Preferred, • 3+ years of relevant experience • No Sponsorship available

Job Description Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. We are looking to bring on board a Junior Plumbing Engineer. If you are looking for an opportunity to work with some of the best minds in the industry, we are looking for you. This position can be located in either our NYC or Newark, NJ office. Some of your responsibilities include the following: • Supports the design of Plumbing and Piping systems throughout all company market sectors including academic, commercial, healthcare, science and technology and mission critical., • Will design closely with a lead Engineer waste, vent, storm water, natural gas, potable and process water systems, purified water systems for healthcare and research and development facilities, process waste, water reuse systems, medical gas delivery systems, laboratory and process gas delivery systems., • Bachelor of Science degree in Mechanical Engineering, or Architectural Engineering., • FE preferred or working on PE certification, • Certified in Plumbing Design (CPD) preferred., • 1-5 years of professional plumbing engineering industry experience, • AutoCAD and Revit are extremely helpful and preference given to candidates that have proven experience, • MS Office products including Word, Excel and Outlook and cloud tools., • The preferred candidate will have excellent oral and written communication, interpersonal, problem solving and analytical skills, • Candidate must have the ability to create and modify technical drawings and specifications, • Customer service perspective with the ability to communicate effectively with all levels of staff Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace free from discrimination and harassment. Learn more about our culture at . The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $70,000 to $90,000 range.

Job Description New Jersey | 30+ Years of Industry Stability | Bright, Collaborative Team Are you a hands-on engineer who thrives on solving complex automation challenges? Join a well-established NJ-based company that designs, customizes, and installs cutting-edge electronic control systems for a rock-solid industry. With over three decades of success, we’re expanding our team of innovators—and we need engineering talent. What You’ll Do • Layout, Design and program PLC-based automation systems from the ground up, • Connect PLCs to control panels and cabinets with precision and creativity, • Integrate PLCs with industrial networks and lower-level electronics like PCBs, • Integrating HMIs and different types of software into the over control system, • Create detailed system documentation, BOMs, part lists, and startup run sheets, • Strong command of PLC Programming and Ladder Logic, • Proficiency in Electrical AutoCAD, • Experience spec’ing and building automation systems, including:, • PLC connectivity to industrial networks (e.g., Ethernet/IP, Modbus, Profibus), • PLC integration with PCBs and embedded electronics, • Control panel and cabinet design and assembly, • Systems documentation and startup procedures, • Work on custom, high-impact projects that challenge and inspire, • Be part of a collaborative, forward-thinking team that values your input, • Enjoy the stability of a company with 30+ years of success—and the agility of a startup mindset Note: base salary quoted does not include bonus. Company DescriptionTerrific Company Culture, Managerial Buy-In towards using technology to provide best of breed solutions to new and existing clients. A Proven leader in their niche with products and services that are sold and used in a multitude of industries (recession-resistant business model). Managers and Employers that are passionate about technology, clients and related products and services that they create, sell and support.Terrific Company Culture, Managerial Buy-In towards using technology to provide best of breed solutions to new and existing clients. A Proven leader in their niche with products and services that are sold and used in a multitude of industries (recession-resistant business model). Managers and Employers that are passionate about technology, clients and related products and services that they create, sell and support.

Job Description French & Parrello Associates (FPA) is seeking a Staff Engineer for our Structural Department in Newark, NJ. Responsibilities * Assist in the analysis and design of building structures using steel, concrete, masonry, and timber materials. * Prepare structural calculations, design drawings, and specifications under the supervision of senior engineers. * Perform modeling and analysis using structural design software (e.g., ETABS, SAP2000, RAM, or similar). * Coordinate with architects and other engineering disciplines to develop integrated design solutions. * Conduct site visits, field inspections, and assist in preparing technical reports. * Support project documentation, quality control reviews, and construction administration tasks. * Participate in internal design discussions and contribute innovative ideas to improve design efficiency and quality. Qualifications * Master’s degree in Structural Engineering (preferred) or Civil Engineering with a focus on structures. * 0–2 years of relevant experience in building design. * EIT certification or ability to obtain within one year required; PE license a plus. * Proficiency in structural analysis and design software, as well as AutoCAD and/or Revit. * Strong understanding of building codes and design standards (IBC, ASCE 7, ACI, AISC, etc.). * Excellent written and verbal communication skills. * Detail-oriented with the ability to manage multiple tasks and deadlines. Benefits We understand that a fulfilling career is about more than just the work you do – it’s about feeling secure in your health, confident in your financial future, and balanced in your personal and professional life. That’s why we strive to offer one of the most comprehensive benefits packages in our industry. By doing so, we aim to attract top talent and ensure that every member of our team has the resources they need to thrive, both at work and at home. • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching & Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance and Supplemental Insurance Plans, • Employee Assistance Program (EAP) and Wellness Benefits, • Tuition Reimbursement, • Training and Professional Development, • Corporate sponsored events, outings & activities, including community outreach opportunities., • Competitive Personal Time Off Program (PTO), • Transit/Parking Program, • Summer Hours, • Employee Discounts The projected compensation range for this position is $70,000 to $77,000. Actual compensation will depend on factors such as experience, education and skill set. Who We Are We value curiosity, accountability, and continuous learning – and we provide the tools, mentorship, and flexibility to help every team member reach their full potential. We’re looking for talented, driven professionals who share our passion for pushing boundaries and creating solutions that make a real difference in people’s lives. At FPA, we’re proud to be recognized year after year as one of NJBIZ’s Best Places to Work, and consistently ranked among the top firms in the industry. These honors reflect our people-first culture, collaborative spirit, and commitment to innovation and excellence. At FPA, you’ll find more than a job – you’ll find purpose, connection, and a workplace that invests in your growth and success. Engineering and Consulting Since 1974 For over 50 years, French & Parrello Associates (FPA) has been a trusted partner in delivering innovative solutions that shape communities, enhance infrastructure, and drive progress. As a multidisciplinary firm, we integrate expertise across diverse markets to streamline project execution, optimize resources, and achieve cost-effective, forward-thinking results. FPA combines boutique-level service with enterprise-level expertise – offering clients the best of both worlds. With a steadfast commitment to quality, collaboration, and innovation, our team continues to shape the built environment with solutions that stand the test of time.

Job DescriptionFrench & Parrello Associates (FPA) is seeking a Project Engineer for our Structural Department in Newark, NJ. Responsibilities: * Lead structural analysis and design for building projects using steel, concrete, masonry, and timber materials. * Oversee preparation of design drawings, calculations, and technical specifications. * Serve as the primary point of contact for clients, architects, and other engineering disciplines throughout the project lifecycle. * Manage project schedules, budgets, and coordination tasks to ensure successful delivery. * Review work performed by junior engineers and provide technical mentorship and quality oversight. * Perform advanced modeling and analysis using software such as ETABS, RAM, RISA, or SAP2000. * Conduct field observations, site inspections, and prepare detailed engineering reports. * Ensure compliance with applicable codes and standards (IBC, ASCE 7, AISC, ACI, etc.). * Contribute to internal process improvements and support business development initiatives as needed. Qualifications: * Master’s degree in Structural Engineering (preferred) or Civil Engineering with a structural concentration. * 5–8 years of professional experience in structural building design. * Professional Engineer (PE) license required or the ability to obtain within six months. * Strong proficiency in structural analysis and design software (ETABS, SAP2000, RAM, or equivalent). * Experience with Revit and/or AutoCAD for structural documentation. * Proven ability to manage multiple projects and coordinate with multidisciplinary teams. * Excellent communication, leadership, and organizational skills. * Thorough understanding of building codes, materials, and construction practices. Benefits We understand that a fulfilling career is about more than just the work you do – it’s about feeling secure in your health, confident in your financial future, and balanced in your personal and professional life. That’s why we strive to offer one of the most comprehensive benefits packages in our industry. By doing so, we aim to attract top talent and ensure that every member of our team has the resources they need to thrive, both at work and at home. • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching, • Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance, • Health Wellness Programs, Flu shots, Rewards for Healthy Lifestyle, • Tuition Reimbursement, • Training and Professional Development, • Opportunities for Community Outreach Through Internal Networks, • Personal Time Off Program (PTO), • Transit/Parking Program, • Flexible Summer Work Schedules, • Aflac, • Discount Tickets: Tickets At Work, LifeMart, and Staples Work Wins, • Credit Union, • Verizon Wireless Discount, • Dry Cleaning Service, • Corporate Events, Outings & Activities Compensation The projected compensation range for this position is $89,000 to $115,000. Actual compensation will depend on factors such as experience, education and skill set. Who We Are We value curiosity, accountability, and continuous learning – and we provide the tools, mentorship, and flexibility to help every team member reach their full potential. We’re looking for talented, driven professionals who share our passion for pushing boundaries and creating solutions that make a real difference in people’s lives. At FPA, we’re proud to be recognized year after year as one of NJBIZ’s Best Places to Work, and consistently ranked among the top firms in the industry. These honors reflect our people-first culture, collaborative spirit, and commitment to innovation and excellence. At FPA, you’ll find more than a job – you’ll find purpose, connection, and a workplace that invests in your growth and success. Engineering and Consulting Since 1974 For over 50 years, French & Parrello Associates (FPA) has been a trusted partner in delivering innovative solutions that shape communities, enhance infrastructure, and drive progress. As a multidisciplinary firm, we integrate expertise across diverse markets to streamline project execution, optimize resources, and achieve cost-effective, forward-thinking results. FPA combines boutique-level service with enterprise-level expertise – offering clients the best of both worlds. With a steadfast commitment to quality, collaboration, and innovation, our team continues to shape the built environment with solutions that stand

Job DescriptionFrench & Parrello Associates (FPA) is seeking a Project Manager for our Highway/Traffic Department in Newark, NJ. Responsibilities: • Develop design documents for a variety of transportation improvements projects utilizing AutoCAD Civil 3D or MicroStation Software, • Provide construction support services as needed., • Complete assignments independently with minimal supervision, • Collaborate with staff within the transportation group and across various other disciplines on larger projects., • Delegate tasks to staff engineers and oversee their work., • Monitoring of the project schedule, budget, and staffing needs, • Actively participate in client contact and communications, • 7 (+) plus years of related work experience., • PE license required., • Proficient with AutoCAD Civil3D and MicroStation design software, • Experience in management and design of roadway, traffic, and/or bridge improvement projects (NJDOT or PennDOT experience a plus), • Well versed in local and national design standards, • Knowledge of traffic engineering principles a plus, • Highly motivated and eager to work on a diverse range of transportation improvement projects for local, county, and state agencies, • Willingness to represent FPA at professional societies and technical seminars., • Excellent written and verbal communication skills. We understand that a fulfilling career is about more than just the work you do – it’s about feeling secure in your health, confident in your financial future, and balanced in your personal and professional life. That’s why we strive to offer one of the most comprehensive benefits packages in our industry. By doing so, we aim to attract top talent and ensure that every member of our team has the resources they need to thrive, both at work and at home. • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching, • Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance, • Health Wellness Programs, Flu shots, Rewards for Healthy Lifestyle, • Tuition Reimbursement, • Training and Professional Development, • Opportunities for Community Outreach Through Internal Networks, • Personal Time Off Program (PTO), • Transit/Parking Program, • Flexible Summer Work Schedules, • Aflac, • Discount Tickets: Tickets At Work, LifeMart, and Staples Work Wins, • Credit Union, • Verizon Wireless Discount, • Dry Cleaning Service, • Corporate Events, Outings & Activities Compensation The projected compensation range for this position is $125,000 to $160,000. Actual compensation will depend on factors such as experience, education and skill set. Who We Are We value curiosity, accountability, and continuous learning – and we provide the tools, mentorship, and flexibility to help every team member reach their full potential. We’re looking for talented, driven professionals who share our passion for pushing boundaries and creating solutions that make a real difference in people’s lives. At FPA, we’re proud to be recognized year after year as one of NJBIZ’s Best Places to Work, and consistently ranked among the top firms in the industry. These honors reflect our people-first culture, collaborative spirit, and commitment to innovation and excellence. At FPA, you’ll find more than a job – you’ll find purpose, connection, and a workplace that invests in your growth and success. Engineering and Consulting Since 1974 For over 50 years, French & Parrello Associates (FPA) has been a trusted partner in delivering innovative solutions that shape communities, enhance infrastructure, and drive progress. As a multidisciplinary firm, we integrate expertise across diverse markets to streamline project execution, optimize resources, and achieve cost-effective, forward-thinking results. FPA combines boutique-level service with enterprise-level expertise – offering clients the best of both worlds. With a steadfast commitment to quality, collaboration, and innovation, our team continues to shape the built environment with solutions that stand the test of time.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Civil Engineer - Highways Reports to: Department Manager – Civil General Qualities: • Strong verbal and written skills are preferred., • Can accomplish assigned tasks independently with guidance from their supervisor., • Capable of developing solutions to problems. Responsibilities: • Highway design including horizontal and vertical alignment design, grading, roadway storm water management, maintenance and protection of traffic, signing and striping, utility relocation, and erosion and sediment control design., • Preparation of associated calculations, reports, and spreadsheets., • Preparation of Specifications. Drafting technical specifications in accordance with DOT and project-specific requirements to support contract documents, • Preparation of quantity calculations and construction cost estimates. Conducting precise quantity take-offs and develop construction cost estimates to support budgeting, bidding, and funding applications., • Working on, and leading, design teams in all aspects of a given project to develop detailed design documents for construction plans., • Plan preparation using AutoCAD or MicroStation. Creating and editing engineering plans and drawings using AutoCAD and/or MicroStation for submission to clients, agencies, and contractors., • Field work including investigations, data collection, sign and roadway infrastructure inventory collection. Administrative Responsibilities: • Bachelor of Science in Civil Engineering from an accredited institute of higher learning. Experience: • Professional Engineer’s License in NY or NJ, • Minimum of 5 years of experience in civil/site or transportation engineering., • Qualified candidates should be experienced with highway design., • Familiarity with NYSDOT or NJDOT agency standards and protocols is a plus. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Structural Engineer (Bridges) Reports to: Vice President - Structural General Qualities • Has excellent communication and writing skills., • Has excellent Microsoft Word and Excel. Ability to navigate through company internet-based systems., • Proactive self-starter capable of setting a positive example for the staff. Technical Responsibilities • Manage multiple building/bridge design projects concurrently, including project planning, scheduling, budgeting, and resource allocation, to ensure timely and successful project delivery within scope and budget constraints., • Utilize advanced structural analysis techniques and software tools to perform complex analyses, optimize designs, and ensure structural integrity, efficiency, and safety., • Serve as the primary point of contact for clients, consulting with them to understand project requirements, goals, and constraints, and providing expert technical advice, presentations, and solutions to address their needs., • Ensure compliance with relevant industry codes, standards, and regulations governing bridge design and construction, including Building & Bridge Design Specifications, and local building codes., • Conduct thorough reviews of design calculations, drawings, and specifications prepared by the team to verify accuracy, consistency, and adherence to best practices and project requirements., • Collaborate with construction teams and contractors during the construction phase to address design-related issues, provide clarifications, and ensure that the construction meets design intent and performance expectations., • Identify potential risks and challenges associated with design projects, develop mitigation strategies, and proactively address issues to minimize project delays and cost overruns., • Stay abreast of emerging trends, technologies, and advancements in building and bridge engineering, structural analysis, and design optimization through professional development, training, and participation in industry conferences and forums., • Drive innovation in design by integrating cutting-edge technologies, materials, and construction methods to enhance performance, sustainability, and cost-effectiveness., • Professional Engineer license in NY or NJ, • A Bachelor’s or Master’s degree from an accredited college/university in Civil Engineering with a focus in structural engineering., • 5 -10 years’ experience in structural design, • Proficiency in structural analysis software (e.g., SAP2000, MIDAS Civil, LARSA) and computer-aided design (CAD) tools (e.g., AutoCAD, MicroStation)., • Knowledgeable with Risa-3D and STAADPro analysis software., • Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams and interact confidently with clients and stakeholders., • Proven track record of delivering high-quality building and bridge designs on time and within budget, with a focus on innovation, sustainability, and client satisfaction. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Munich Airport NJ LLC (MANJ), a US-based subsidiary of the renowned German Airport Operator Munich Airport, is responsible for the maintenance and concession management of Terminal A at Newark Liberty International Airport (EWR). We are seeking a highly motivated Operations Planning Specialist to join our team as soon as possible. This is an exciting opportunity to be part of a fast-moving organization, where you will contribute to the development of safe, efficient, and innovative passenger terminal operations. You will report to the Manager, Operations Planning and play a pivotal role in shaping the future of the company with your expertise and personality. We are looking for a candidate who possesses a strong background in the aviation industry, and proven track-record working with U.S. airport operators and airlines. The successful candidate will be responsible for improving Terminal A’s operations through supporting various operations and planning projects, as well as facilitating management decision-making through sound data analysis and reporting. This is an excellent opportunity to make a significant impact on the operations of one of the most advanced terminal developments in the United States. Responsibilities * Operations Support and Planning: * Generate, analyze, and distribute daily traffic reports and forecasts, using available schedule data. * Support the development and implementation of comprehensive Key Performance Indicator (KPI) dashboards, providing insights into operational performance. * Support the development and implementation of a formal management reporting system to capture and communicate operational data and metrics, facilitating data-driven decision-making. * Foster effective coordination and communication within the airline community, managing open item lists and facilitating stakeholder meetings. * Identify infrastructure or operational gaps within the terminal, airside, baggage handling, operations control, and security, collaborating with the relevant teams to address them. * Continuously optimize processes and procedures by identifying areas for improvement, documenting optimization strategies, and driving their execution. * Setup and maintain a training database, including training materials, records, and plans, and align with the relevant department trainers for any training requirements. * Project Management Support: * Assist on the management of operations projects from initiation to completion, ensuring adherence to project timelines, budgets, and quality standards. * Collaborate closely with contracted engineering partners, as well as internal and external stakeholders to establish and implement terminal planning infrastructure, driving operational efficiency and excellence. * Effectively communicate project objectives, tasks, and milestones to stakeholders, fostering collaboration and ensuring successful project execution. * Conduct regular project progress reviews, proactively identify and mitigate risks, and ensure compliance with regulatory requirements and industry standards. * Innovation Management: * Facilitate innovation generation, recording and sharing within the organization by engaging staff, management, and other stakeholders in the innovation management process. * Identify relevant ideas for implementation into organization, operations, and/or infrastructure. * Monitor industry trends and emerging technologies, evaluating their potential application to the operations of EWR Terminal A. * Conduct comprehensive cost/benefit analyses for potential innovation projects, ensuring alignment with operational goals and objectives. * Define and propose future operational projects, leveraging industry advancements to drive continuous improvement and maintain competitiveness. * Miscellaneous: * Undertake additional tasks and responsibilities as directed by the Manager Operations Planning. Education & Training * Bachelor's degree in Airport or Aviation Management, or related field. Master’s degree is preferred. * 3-5 years’ experience in a project-related or planning role with an airport operator, airline, consultancy, or similar. * Candidates with a master’s degree in a relevant field may be considered in lieu of some work experience, provided they demonstrate a strong academic background and the necessary skills for the position. Skills & Experience * Proven experience in airport operations planning, airport project-related work, or similar roles within airport operators or airlines, with an in-depth knowledge of airport operations. * Knowledge of airport certification regulations, particularly 14 CFR Part 139 * Project management skills, with a track record of working on projects in a complex stakeholder environment. * Exceptional analytical and problem-solving abilities, with a proactive and solution-oriented mindset. * Excellent communication and interpersonal skills, with the ability to collaborate effectively with internal and external stakeholders (including government agencies) at all levels. * Excellent proficiency in using MS Office applications. * Proficiency in AutoCAD is a plus. * A strong focus on delivering high-quality results and exceeding expectations. * A demonstrated ability to work independently, make independent decisions, and prioritize tasks effectively. Good reasons why you should become part of the airport family * Be part of a team who embraces diversity, fosters collaboration, practices mentorship, and believes in a positive, healthy work climate. * Be a key part of building Munich Airports reputation in the U.S. * Fast-paced international working environment * Attractive benefit package; Health, Vision, Dental, 401(k) Matching, LTD/STD, PTO Munich Airport US Holding LLC and its subdivision Munich Airport NJ LLC are equal opportunity employers. The base salary range for this role is $65k to $85k. Base salary is part of our total rewards package which also includes the opportunity for annual salary increases and bonuses. Employees are eligible for them and eligible dependents to enroll in medical, dental, vision and Employee Assistance Plan (EAP) benefits as of DAY 1. Employees are also eligible for our 401(k) plan, which includes a company match, after six months of service. The employer also provides life and disability insurances and leaves provided in line with NJ and federal law. Our robust time-off policy includes paid time off and 12 paid holidays. Total compensation, including base salary to be offered, will depend on elements unique to each candidate, including candidate experience, skills, education and other factors permitted by law. Munich Airport US Holding and it's subdivision Munich Airport NJ LLC are equal opportunity employers. Powered by JazzHR 2uqS4LmVWS

Job Description Industrial Designer Elizabeth, NJ | Full-time Responsibilities: * Develop and refine designs for truck accessories (bumpers, visors, custom panels, etc.). * Create accurate 2D drawings and 3D models (AutoCAD, Inventor, or similar). * Prepare DXF files for laser cutting and ensure designs meet production requirements. * Collaborate with the fabrication team to ensure feasibility and accuracy. * Assist in prototyping, testing, and adjusting designs as needed. * Maintain organized design files, drawings, and part numbers. * Stay updated with trends in truck design and customization. Requirements: * Bachelor’s degree in Industrial Design, Mechanical Design, or related field (or equivalent experience). * Proficiency with CAD software (Autodesk Inventor, AutoCAD, or SolidWorks). * Strong understanding of manufacturing processes (laser cutting, welding, bending, etc.). * Creativity with an eye for detail and aesthetics. * Ability to manage multiple projects and meet deadlines. * Experience in the automotive/trucking industry is a strong plus. * Spanish is a requirement Company DescriptionAbout Us Tony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.About Us\r\nTony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.

Job Description Overview: We're looking for an experienced Project Surveyor who can take a project from raw field data all the way to a polished, final deliverable. This role is ideal for a seasoned surveyor who's grown from the field into the office, with the ability to manage crews, process drawings, and communicate effectively with a team. You'll support high-profile public sector work (NJDOT, Port Authority, Transit) and help take pressure off our senior team as we continue to grow. What You'll Do: • Manage and coordinate field crews (with the ability to jump in when needed), • Process field data into polished CAD drawings, • Finalize ROW mosaics and maps — from deeds to deliverables, • Communicate daily with office and field staff to keep projects moving, • Review plan sets for accuracy, consistency, and presentation, • Collaborate on Port Authority and NJDOT work, including post-processing, • Work closely with junior CAD techs to support labeling and linework cleanup, • 10+ years of experience in land surveying, • Started in the field and moved into the office (field-first mindset), • Strong in AutoCAD Civil 3D; experience with Cyclone, TopoDOT, and/or ClearEdge is a plus, • Comfortable reviewing deeds, creating mosaics, and finalizing ROW, • Great written and verbal communication skills, • Self-driven, dependable, and a team player, • License (PLS) is not required but welcome, • Tight-knit team with strong leadership and mentorship, • Opportunity to grow into a Project Manager or Department Lead, • Flexible, balanced work culture — 40 hrs/week standard, • Public-sector focused work with a wide range of projects

Job DescriptionSenior Design Engineer Needed For Leading Aerospace Manufacturer This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: We have unceasingly continued to design and manufacture fluid control components, motion control components, and systems for some of the most demanding applications our customers have. Why join us? If you are an experienced Senior Design Engineer, then please apply! Do you want to work with some of the nation’s best Clients AND enjoy time at home w/ family? We do too! • Meaningful Work!, • Best in Class Company!, • Competitive Compensation Package!, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details We are seeking a dynamic and highly skilled Permanent Design Engineer to join our Aerospace team. This individual will be responsible for the design and development of aerospace valves, pumps, and related components. The ideal candidate will have a strong background in product development and management, with a particular emphasis on the aerospace industry. This is an exciting opportunity to play a critical role in the development of innovative aerospace solutions that will have a significant impact on the future of the industry. Responsibilities: 1. Design and develop aerospace valves, pumps, and related components in accordance with industry standards and customer specifications., 2. Utilize engineering software such as AutoCAD, SolidWorks, and Inventor to create detailed 3D models and technical drawings of product designs., 3. Apply knowledge of GD&T principles to ensure accuracy and precision in product designs., 4. Collaborate closely with the product management team to define product specifications and requirements, and to ensure that product designs meet these requirements., 5. Conduct thorough product testing and analysis to evaluate the performance and reliability of product designs, and to identify and resolve any design issues., 6. Work with the manufacturing team to oversee the production of product designs, and to ensure that products are manufactured to the highest quality standards., 7. Stay up-to-date with the latest developments and trends in the aerospace industry, and incorporate this knowledge into product designs. Qualifications: 1. Bachelor’s degree in Engineering or a related field., 2. Minimum of 8 years of experience in the engineering industry, with a focus on product development and management., 3. Extensive experience with engineering software such as AutoCAD, SolidWorks, and Inventor., 4. Strong knowledge of aerospace valves, including butterfly valves and solenoid valves., 5. Experience with hydraulic and pneumatic systems., 6. Familiarity with ASME standards., 7. Excellent problem-solving skills, with a strong attention to detail., 8. Strong communication and teamwork skills, with the ability to collaborate effectively with diverse teams., 9. Ability to manage multiple projects simultaneously and to meet tight deadlines., 10. Passion for innovation and a desire to stay at the forefront of the aerospace industry. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.