Autocad jobs in Atlanta, GeorgiaCreate job alerts

Description The National Airspace Systems Integration Support (NISC) program at Leidos is seeking Senior Electronics Design Engineers to provide support to the Federal Aviation Administration (FAA) Eastern Service Area - Engineering Services Groups located in: College Park, GA Washington, DC Burlington, MA Nashua, NH The ideal candidate will support the daily operations of the FAA’s Telecommunications Portfolio and the goal of converting and modernizing National Airspace Connectivity. The scope includes Small Tower Voice Switches, Telecommunications Infrastructure Replacement, Air to Ground Protocol Converters and NEXCOM Radios. This is a design centric position supporting modernization of Voice Switches for the Air Traffic Control System throughout the Eastern part of the United States. Job Duties Include: • Evaluate existing site surveys to develop scope of work for site preparation requirements, • Conduct site surveys at remote sites for site preparation requirements, • Draft site preparation scope of work for facilities based on site survey reports and facility data, • Identify Contract Line-Item Numbers (CLINs) required to complete site preparation, • Develop cost estimates for site preparation, • Review contractor site prep proposals for accuracy and compliance with scope of work, • Generate Operational Risk Management Pre-Requisite Programs for site preparation and installation of voice-switch equipment, • Work with local stakeholders to implement risk mitigations for implementation, • Coordinate and scheduled site preparation activities with stakeholders and contractor personnel, • Oversee site prep and installation work performed by contractor, • Generate periodic status reports, • Update Corporate Work Plan (CWP) data, • Update facility drawings (red lines) for drafting Basic Qualifications: • Electronics Engineering Degree (B.S.) with a minimum of 8 years’ experience., • Ability to travel > 50%., • Ability to obtain a Public Trust Suitability. (To be eligible for the FAA Public Trust you must be a US Citizen or a Green Card Holder who has resided in the US for the past 3 years)., • Proficiency in MS Office Suites., • Design experience working with AutoCAD or similar tools., • Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment Tower, • Knowledge of OSHA and general construction and electrical safety standards. Desired Qualifications: • Knowledge of National Air Space (NAS) facilities such as ASR, ATCT, VOR, ARSR, RCAG., • (NASET), National Airspace System Equipment Building (NASEB)., • Knowledge of Corporate Work Plan (CWP) 4.1.12 We’re not looking for perfectly polished resumes or perfect fits. We’re looking for people who break limits, ask hard questions, and don’t wait to be told what’s next. At Leidos, we’re not following the roadmap — we’re redrawing it. Original Posting:November 13, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $104,650.00 - $189,175.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit . Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at . Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description Are you ready for your next career challenge? We are in search of a Lead Substation Physical Engineer to join our diverse and fast-paced Atlanta, GA organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing high voltage utility substation projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. REMOTE and HYBRID SUPPORT AVAILABLE! *Candidates are able to support remotely but must be able relocate to or live within the United States. *Must be willing to attend staff meetings and site visits in the Atlanta, GA metro area. If this sounds like the kind of environment where you can thrive, keep reading! The Challenge: • Perform conceptual and detailed HV and MV Substation Physical/Electrical design for medium to large scale utilities/substations (including basic layout, electrical arrangement, one line, three line drawings, plan-section, grounding, AC and DC system drawings), • Perform advanced engineering studies and calculations, • Perform Quality Control reviews on medium to large substation physical design projects, • Create and review bill of materials for substation physical projects, • Develop and review proposals, and scopes of work for substation physical projects, • Develop and provide advanced technical presentations to the team to assist with staff technical development, • Be involved in client interaction (including site visits) with a drive for customer satisfaction, • Provide leadership and mentorship to junior engineers, • Possess excellent communication skills and the ability to interact with the internal teams and clients to meet project objectives Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! What you will bring to the table: • Bachelor’s degree in Electrical, Mechanical, civil or related degree with eight (8+) plus years of Substation physical design experience., • Leadership experience in executing substation projects, • Excellent communication skills and ability to interact with the internal team and clients to meet project needs., • Ability to lead bids and proposal effort for utility clients, • Ability to perform quality control checks on substation design projects., • Act as a supervisor for one to six direct reports, • Ability to read and design substation physical drawings such as one line drawings, three line drawings, plan-section drawings, foundation, grounding drawings., • Ability to read and design substation protection and control drawings such as one-line drawings, three line drawings, AC/DC schematic drawings and wiring design, • Ability to create and check bill of materials for substation physical, • Act as a key contributor to the develop substation physical application documents to define design scope, philosophies, methodologies, and criteria for medium and high-voltage substation projects., • Experience with grounding studies/lightning protection and lighting studies., • Ability to attend site visit at customer location It would be nice if you had: • Registered Professional Engineer (P.E.) License, • Master’s degree in related field, • Experience with QA/QC, • Working knowledge of protection and control design, • Experience with BUS calculations., • Experience with WinIGS or CDEGS, • Experience with SDS AutoCAD Electrical software. In this role, you can expect to grow: • With opportunities for both technical and non-technical training, • By working with different types of projects ranging from distribution to transmission level voltages, • By participating in our mentorship program, • By gaining knowledge in electrical power calculations and NESC WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. PDSSUBSTATION PowerDelivery Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don’t wear capes (they’re a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it’s always been done.” Original Posting:August 13, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $104,650.00 - $189,175.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit . Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at . Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote #Featuredjob

Description In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) performing design engineering, cost estimating, scheduling, coordinating, inspecting, and acceptance and report project progress and issues against project goals, scope of work, and schedule. The projects support air traffic control facilities over the geographic scope of the ESA. You will ensure accuracy of design, products and timeliness of project completion. This is an in office position located in College Park, GA Up to 25% travel Civil Engineer Primary Responsibilities: • Plan and design a variety of facility establishment, replacement and modernization projects (e.g. buildings, roofing, antenna towers, site work, structural systems, seismic reinforcement, foundations and environmental assessments), • Perform on-site surveys to develop designs and detailed reports, • Conduct and analyze studies of existing facilities, • Utilize relevant software tools to assist in analysis and design, • Generate sketches showing relation of proposed work in existing or new facilities with specifications and dimensions, • Plan, schedule, and coordinate construction project activities to meet milestones and deadlines working directly with stakeholders and contractors, • Confer with multi-disciplinary engineering staff and other personnel to identify and resolve problems with the design or implementation, • Prepare construction drawings and prepare site-specific specifications and contract documents and independent cost estimates, • Review contractor design and construction submittals, • Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans, risk management plans, lead and asbestos work permits), • Participate in on-site coordination meetings, inspections, cutovers, testing and restoration of facilities, • Provide periodic updates of project to team, management, and stakeholders, • Provide timely responses for requests for information and project related submittals, • Provide monthly and semi-annual work status reports, • Track and reconcile closure of project punchlist exceptions, • Manage multiple projects towards successful on-time completion, • Perform internal design reviews of other projects Civil Engineer Basic Qualifications: • Civil Engineering degree from a college or university accredited by the Accreditation Board for Engineering and Technology (ABET)., • Four years of experience in design and construction of commercial or institutional facilities. Or a Masters degree and 2 years of relevant experience., • Current and relevant knowledge of building codes., • Experience using Microsoft Office suite., • Proficiency in engineering analysis and design software tools., • Ability to obtain and maintain public trust suitability. Civil Engineer Preferred Qualifications: • Ability to create and edit project drawings in AutoCAD., • Understanding of the National Airspace System components within an air route traffic control center (ARTCC)., • Registered Professional Engineer in good standing in the United States. NISC IV At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. September 8, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $72,150.00 - $130,425.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Featuredjob

Design Engineer Design Galleria Kitchen and Bath Studio, one of the nation’s leading and award-winning kitchen and bath design firms is seeking a qualified individual for immediate, full-time employment in our Atlanta studio. Visit . Applicants should be: • AutoCAD proficient, • Skilled at translating hand-drawings and/or conceptual sketches into floor plans and elevations, • Experienced in the development of mechanical drawings for plumbing, electrical, and lighting components., • Capable of using typical Microsoft Office products for PC’s (Word, Excel, Outlook, etc.) with excellent written and verbal communication skills., • Very organized and able to manage multiple tasks simultaneously, • Energetic, • Gifted with a sense of design style and function with attention to detail, • Ethical and professional in manner, attitude and dress, • Self-motivated and able to work independently, • Able to meet schedule deadlines and work at a fast pace Job responsibilities will include: • Technical development of projects, • Direct communication with clients, contractors, installers, architects, interior designers, etc., • Development of cabinetry and accessory orders, • Assisting designers in project management including managing the installation of cabinetry Previous kitchen and bath experience is highly preferred. We offer competitive salaries (based on experience) along with many excellent benefits including flexible work schedules, insurance, 401k plans, paid holidays, etc.

Job Title: Senior Project Architect - REVIT, Multi-Family, NCARB Job Location: Atlanta, Georgia (Hybrid 2 days at home 3 days at the office) Salary: Competitive Salary DOE, Benefits, 401k, Bonus Potential Requirements: 5+ Years Design Experience in Multifamily or Hospitality sectors, ground up and renovation work Position Overview We are seeking a highly skilled Senior Project Architect with expertise in multi-family residential projects. The ideal candidate will have a strong background in architectural design, project management, and sustainable design practices, with proven experience in leading teams and collaborating effectively to deliver high-quality outcomes. The role requires proficiency in REVIT and a deep understanding of building codes, construction documentation, and client communication. Key Responsibilities • Lead the design and development of multi-family residential projects from conceptualization to completion., • Manage project timelines, budgets, and resources to ensure successful delivery of projects., • Collaborate with cross-functional teams including engineers, contractors, and clients to achieve project goals., • Prepare and review architectural designs, construction drawings, and documentation using REVIT and AutoCAD., • Ensure compliance with building codes, zoning laws, and sustainability standards throughout the project lifecycle., • Facilitate client communication to understand project requirements and deliver exceptional design solutions., • Mentor and guide junior architects and design staff, fostering a collaborative team environment. Qualifications • Bachelor's or Master's degree in Architecture from an accredited program., • NCARB certification and a valid architectural license are required., • 5+ years of experience in architectural design and project management, particularly in multi-family housing., • Strong proficiency in REVIT and AutoCAD; experience with other design software is a plus., • In-depth knowledge of building codes, construction documentation, and sustainable design practices., • Excellent communication skills and the ability to collaborate effectively with clients and team members. Benefits • Competitive salary DOE $90,000-$130,000/year +, • Comprehensive benefits, including medical, dental, vision, life, and disability insurance, • 6% 401K match, • 18 days PTO and 11.5 paid holidays, • Education reimbursement, • Professional development opportunities, • Hybrid work flexibility, • Bonus Potential Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: • Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : KS6-1855641 -- in the email subject line for your application to be considered.*** Kasian Strawick - Lead Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 06/05/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Designer I – Interior Design Location: Atlanta, GA ( Central Perimeter) Company: Bedrock Homes About Bedrock Homes At Bedrock Homes, we pride ourselves on creating high-quality custom and spec homes that exceed our clients’ expectations. With over a decade of experience, we have built a reputation for delivering exceptional craftsmanship, integrity, and attention to detail. As we continue to expand, we are looking for motivated, design-driven professionals who want to grow with a company that values collaboration, creativity, and excellence in every detail. Bedrock Homes specializes in residential and luxury custom home building throughout Sandy Springs and the Metro Atlanta area. We're not just builders—we're creators of dream homes. Our team works closely together in a family-oriented, collaborative environment where integrity, quality, and customer satisfaction are at the forefront of everything we do. Learn more about us at: About the Role The Designer I – Interior Design position offers an opportunity to contribute to the design and documentation of luxury homes that embody thoughtful design, refined detail, and timeless luxury. As a Designer I, you’ll work closely with our Lead Designer and project teams to bring each client’s vision to life—balancing aesthetics, function, and constructability. This is an ideal position for a driven, detail-oriented designer who thrives in a fast-paced environment and is eager to grow within a high-performing team. Key Responsibilities • Support the Lead Designer in ensuring design intent is clearly communicated across all drawings, documents, and project correspondence., • Produce detailed interior elevations and 3D renderings using AutoCAD and SketchUp; Revit experience is a plus., • Maintain and update project design schedules in Microsoft Excel., • Source, catalog, and organize materials, finishes, and fixtures in alignment with client budgets and project timelines., • Develop visual presentations, concept boards, and client-facing materials in Canva to support design proposals., • Collaborate with vendors, builders, and trade partners to gather samples, pricing, and product information., • Provide support during client meetings, showroom visits, and on-site reviews throughout the design process., • Uphold Bedrock’s commitment to quality, accuracy, and an exceptional client experience. Qualifications • Bachelor’s degree in Interior Design, Architecture, or a related field (or equivalent experience)., • 0–2 years of professional experience in residential design or a related environment., • Proficiency in AutoCAD, SketchUp, Canva, and Microsoft Office Suite., • Strong attention to detail, organization, and follow-through in a deadline-driven environment., • Excellent communication and collaboration skills, with a client-first mindset., • Familiarity with material and finish sourcing, FF&E coordination, and design documentation standards., • Eagerness to learn, take direction, and grow within a dynamic design team. Why Join Bedrock Homes • Competitive salary based on experience, • Medical, Dental and Vision Benefits., • 401(k) with matching contributions, • Paid time off and holidays, • Professional development and career growth opportunities, • A collaborative, creative, and fast-paced work environment Equal Opportunity Statement Bedrock Homes is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, genetic information, military status, or any other protected characteristic under federal, state, or local law.

The Assistant Superintendent reports to and is responsible to the Superintendent or Senior Superintendent. They are responsible for assisting with the on-site field administration/supervision and technical management for all construction operations, including direct supervision of subordinates, foreman, subcontractors, and other construction related personnel, and directing them in planning, coordination, and execution of work on time, within budget, attaining or exceeding profit goals, maintaining a safe workplace, promoting and enhancing client relationships and the Company image. Experience: Preferred four (4) year degree in construction-related curriculum or equivalent experience in field-related duties, including any accredited apprentice programs. Three (3) years, +/-, experience in an Entry Level Position as a PE and/or FE. Experience with Viewpoint software. Experience with construction-related software (i.e., Timberline, AutoCAD, Revit, Navisworks, Primavera, or Microsoft Project) is a plus. Responsibilities: • Promote the growth and development of client and designed relationships., • Represent the Company and SG project team in a positive manner in all project meetings., • Represent the Company at all times in such a manner as will enhance the reputation of the firm., • Seek and identify new work opportunities and inform the Director of Operations (“DO”) and Business Development of potential projects and current potential clients., • Assist Superintendent in proper project signage and Company identification., • Has demonstrated the ability to interact with Owners with positive results., • Has demonstrated the ability to interact with Architects and Engineers with positive results., • Has demonstrated the ability to interact with subcontractors with positive results., • Has an attitude of stewardship that makes them highly approachable by all members of the project team., • Gain a thorough understanding of all contract documents., • Assist in ensuring that all requirements of insurance, safety, labor relations, and Equal Employment Opportunity are met., • Proactively identify and solve problems to minimize risk., • Understand local labor requirements, availability, and capability for self-performed work., • Be familiar with all policies and processes as they relate to this position., • Assist in ensuring timely project completion through project scheduling, expediting of material deliveries, and the management of material document submittals/approvals. • Assist in developing the logistics and construction plans and work closely with the Superintendent or Senior Superintendent so that appropriate general conditions and trade budgets reflect the proper construction time, means, and methods required to properly execute the work., • Promote the growth and development of subcontractor and vendor relationships through positive interaction., • Assist in verifying original quantities using model-based takeoff., • Gain an understanding of scheduling software and overall schedule of their projects. Once schedule is developed and sequenced, assist the Superintendent in all updates and management of all subcontractors and vendors to the schedule., • Assist in enforcing a project-specific quality assurance and workmanship program to include all subcontractors., • Have a working knowledge of all project plans, specifications, Contract with Owner, Subcontracts, Purchase Orders, daily correspondence, shop drawings, submittals, and all other project-related documents, and maintain a complete and accurate set of as-built documents., • Can perform quality surveys., • Assist in all layout and field engineering in accordance with all project requirements., • Gain an understanding of all trade contractors’ means and methods in accordance with project contract documents., • Assist in coordinating daily construction activities within existing operating facilities., • Participate in development and execution of a plan for monitoring and completing punch list items., • Assist in coordinating all required field inspections., • Provide technical assistance to all members of project team., • Take an active role in their personal development to chart a path towards a successful career with the Company., • Be familiar with all policies and processes as they relate to this position., • Generate and maintain a consistent sense of urgency throughout the project team and extend sub/supplier team to maintain the energy level required to stay on or ahead of schedule throughout the project., • Review models including structure, interior, and exterior architectural elements, and MEP systems., • Review and verify “shop drawing” level 3D models for any self-performed work., • Review models created for constructability issues and solutions for any self-performed work., • Review and verify dimensioned drawings from the model for field use., • Calculate quantities for material orders and crew work planning using model data., • Participate in job layout., • Gain an understanding of the process to review, approve, and code subcontractor and vendor payment applications and miscellaneous invoices in Viewpoint. Safety: • Assist in enforcing a project site-specific safety program in accordance with policies and processes, local, state, and federal laws, to include all subcontractors., • Gain knowledge of applicable OSHA requirements and the management of an OSHA site visit, and obtain and maintain a current OSHA 30-hour certification., • Know the appropriate way to respond to any project crisis in conjunction with Superintendent and Company Safety Manager., • Set the example with proper personal behavior when on-site at all times to promote a safe culture intolerant of injuries or negligent behavior that may lead to injuries and a commitment to returning workers home safely every day. Licensure/Certification: • Preferred achievement of LEED AP., • OSHA 30-Hour certification.

Designer I – Interior Design Location: Atlanta, GA ( Central Perimeter) Company: Bedrock Homes About Bedrock Homes At Bedrock Homes, we pride ourselves on creating high-quality custom and spec homes that exceed our clients’ expectations. With over a decade of experience, we have built a reputation for delivering exceptional craftsmanship, integrity, and attention to detail. As we continue to expand, we are looking for motivated, design-driven professionals who want to grow with a company that values collaboration, creativity, and excellence in every detail. Bedrock Homes specializes in residential and luxury custom home building throughout Sandy Springs and the Metro Atlanta area. We're not just builders—we're creators of dream homes. Our team works closely together in a family-oriented, collaborative environment where integrity, quality, and customer satisfaction are at the forefront of everything we do. Learn more about us at: About the Role The Designer I – Interior Design position offers an opportunity to contribute to the design and documentation of luxury homes that embody thoughtful design, refined detail, and timeless luxury. As a Designer I, you’ll work closely with our Lead Designer and project teams to bring each client’s vision to life—balancing aesthetics, function, and constructability. This is an ideal position for a driven, detail-oriented designer who thrives in a fast-paced environment and is eager to grow within a high-performing team. Key Responsibilities • Support the Lead Designer in ensuring design intent is clearly communicated across all drawings, documents, and project correspondence., • Produce detailed interior elevations and 3D renderings using AutoCAD and SketchUp; Revit experience is a plus., • Maintain and update project design schedules in Microsoft Excel., • Source, catalog, and organize materials, finishes, and fixtures in alignment with client budgets and project timelines., • Develop visual presentations, concept boards, and client-facing materials in Canva to support design proposals., • Collaborate with vendors, builders, and trade partners to gather samples, pricing, and product information., • Provide support during client meetings, showroom visits, and on-site reviews throughout the design process., • Uphold Bedrock’s commitment to quality, accuracy, and an exceptional client experience. Qualifications • Bachelor’s degree in Interior Design, Architecture, or a related field (or equivalent experience)., • 0–2 years of professional experience in residential design or a related environment., • Proficiency in AutoCAD, SketchUp, Canva, and Microsoft Office Suite., • Strong attention to detail, organization, and follow-through in a deadline-driven environment., • Excellent communication and collaboration skills, with a client-first mindset., • Familiarity with material and finish sourcing, FF&E coordination, and design documentation standards., • Eagerness to learn, take direction, and grow within a dynamic design team. Why Join Bedrock Homes • Competitive salary based on experience, • Medical, Dental and Vision Benefits., • 401(k) with matching contributions, • Paid time off and holidays, • Professional development and career growth opportunities, • A collaborative, creative, and fast-paced work environment Equal Opportunity Statement Bedrock Homes is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, genetic information, military status, or any other protected characteristic under federal, state, or local law.

Now Hiring: Architectural Designer – Government & Institutional Projects 📍 Roswell, GA | 🕒 Full-Time | 🏢 Hybrid/On-Site | 🏛️ Sector: Government / Civic / Institutional We’re looking for an Architectural Designer (1–3 years of experience) to join our team and help deliver thoughtful, high-quality design solutions for government clients. You’ll have the opportunity to work on meaningful projects such as municipal buildings, educational facilities, government facilities, and community spaces — contributing to environments that make a lasting impact. If you’re eager to learn, collaborate, and grow your design and technical skills in a supportive, mission-driven environment, we’d love to hear from you. What You’ll Do · Support project teams through all phases of design and documentation · Prepare drawings, 3D models, and presentations for client and agency review · Coordinate with clients, consultants, contractors, and internal team members · Prepare site planning and space planning documents. · Attend due diligence investigations · Research materials, codes, and sustainable design solutions relevant to government work · Assist in preparing specifications, opinion of probable cost, and permitting packages · Contribute to the firm’s technical standards and quality assurance processes What You Bring · A professional degree in Architecture and 1-3 years of experience in an architectural office · Experience with public, institutional, or civic projects (preferred) · Proficiency in Revit and AutoCAD · Knowledge of building codes and accessibility · Strong organizational, communication, and teamwork skills · Architectural licensure in progress (preferred but not required) Benefits Include ✔️ Competitive salary based on experience ✔️ Health, dental & vision insurance ✔️ 401(k) with employer match ✔️ Paid time off and holidays ✔️ Flexible/hybrid work options ✔️ Professional development and licensure support ✔️ Collaborative, mission-driven studio culture At Randall-Paulson Architects, we’re dedicated to designing public spaces that inspire trust, accessibility, and long-term value. Our team takes pride in creating thoughtful, functional environments that support the agencies and communities we serve. 🔗 View the full job description here: Send resumes to Sabrina Heard at #ArchitectureJobs #GovernmentDesign #CivicArchitecture #InstitutionalProjects #ArchitecturalDesigner #NowHiring

Now Hiring: Junior Project Leader / Project Leader – Industrial & Manufacturing Projects 📍Roswell, GA | 🕒 Full-Time | 🏢 Hybrid/On-Site | ⚙️ Sector: Industrial / Manufacturing / Logistics We’re seeking a motivated Junior Project Leader / Project Leader with 3–7 years of experience to join our growing industrial design team. In this role, you’ll take ownership of project coordination, technical documentation, and client interaction for a variety of manufacturing, logistics, and operations-focused facilities. If you thrive in a fast-paced, team-oriented environment and are ready to take the next step in leading projects from concept through construction — we’d love to meet you. What You’ll Do • Manage day-to-day project coordination, documentation, and communication, • Lead portions of the design process under the guidance of senior leadership, • Collaborate with clients, consultants, and contractors to ensure project goals and timelines are met, • Production of construction documents, • Perform code analysis, site planning, and compliance with industrial facility standards, • Contribute to project scheduling, budgeting, and construction administration activities, • Mentor junior team members and support continuous improvement in project delivery What You Bring • A professional degree in Architecture and 3–7 years of relevant experience, • Experience with concrete tilt wall construction in the industrial, manufacturing, or logistics sectors (preferred), • Proficiency in Revit, familiarity with AutoCAD and BIM coordination workflows, • Strong technical understanding of building systems and design requirements, • Ability to manage tasks independently while maintaining close team collaboration, • Excellent communication, organization, and problem-solving skills., • Architectural license or progress toward licensure (preferred) Benefits Include ✔️ Competitive salary based on experience ✔️ Health, dental & vision insurance ✔️ 401(k) with employer match ✔️ Paid time off and holidays ✔️ Flexible/hybrid work options ✔️ Professional development and licensure support ✔️ Collaborative, technical, and team-focused work culture At Randall-Paulson Architects, we’re dedicated to creating efficient, sustainable, and high-performing industrial environments that support the people and processes inside them. Our team takes pride in delivering well-coordinated, practical design solutions that help clients work smarter and build stronger operations. 🔗 View the full job description here: Send resumes to Sabrina Heard at #ArchitectureJobs #IndustrialDesign #ManufacturingFacilities #ProjectLeader #ArchitecturalDesign #NowHiring #LogisticsArchitecture

Senior Water Resources Engineer | Atlanta, GA Description: Typical projects to be worked on include various types of drainage, flood control, bridge hydraulic studies/designs, bridge scour analyses, storm water management studies, and design/contract plans for flood control and storm water infrastructure projects. Required Qualifications • Bachelor of Science in Civil Engineering or related degree(s)., • Professional Engineer in the State of Georgia and the ability to become licensed in other states in the Southeast US., • 10+ years of experience with technical work in Water Resources / Hydrology / Hydraulics., • Advanced knowledge of latest hydrologic and hydraulic computer modeling programs, including GIS-based applications, is required., • Experience with HEC-RAS 1D/2D, SMS SRH2D, EPA-SWMM/PCSWMM 1D/2D, HEC-HMS, HydraFlow, HydroCAD, StormCAD, or equivalent programs is preferred., • Experience with Bentley products (ORD, GEOPAK, InROADS, etc), AutoCAD, and/or ArcGIS is preferred., • Experience working on GDOT projects is preferred.

Kleinfelder is looking for a detail-oriented Senior Land Design Engineer to join our southeast engineering team. With expanding opportunities in the region and a variety of clients, the ideal candidate will join our high achieving, fast-paced team. Excellent communication skills with the willingness to take on responsibilities are valued attributes for this position. The project work will be multi-disciplinary in nature, but experience in traditional industrial/commercial land development, solar, and/or mining is especially relevant. This is a hybrid office role and can be based in: • Charlotte, North Carolina, • Raleigh, North Carolina, • Atlanta, Georgia Key responsibilities include: Under supervision and working with experienced staff, the successful candidate will complete civil engineering designs and the generation of professional plans and specifications, technical calculations, exhibits and reports in the following areas: • Site Layout, Grading, Storm Drainage, Water & Sewer Utilities, • Erosion and Sediment Control, • Storm Water Best Management Practices, • Variety of Civil 3D Plans, exhibits, and technical deliverables, • Municipal and State permitting And will be supporting clients by: • Evaluating design to solve constructability, municipal code, and site challenges., • Coordinating with Architects, Mechanical, Electrical, and Plumbing Engineers, • Performing site visits to perform job scoping and coordination with survey crews, SUE, Geotech, etc., • Periodic construction support to include: review of RFIs & Shop Drawings, field inspections, etc. Education/Certification: • Required, Bachelor of Science Degree in Engineering, • Preferred, Professional Engineer (PE) or ability to obtain within 6 months Skills & Experience: • Excellent written and verbal communication skills, • Self-starter who can work independently and with team members, • Ability to engage in multiple projects to complete successful requirement deliveries, • Ability to organize priorities and multi-task effectively, • Pro-actively troubleshoot and problem-solve with practical, client-focused solutions, • Experience dealing with regulatory agencies and review professionals, • 3-8+ years of related experience in civil engineering, • Computer skills preferred: AutoCAD Civil 3D, HydroCAD, WaterCAD, MS Office Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients’ transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 85 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose – together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer – Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder.

North Georgia Pipeline has been a leading partner and site work contractor across the heavy civil, industrial and municipal markets since 2005. We are dedicated to quality service, safety, and effective project management for our clients, executing small to large-scale projects on time with proven expertise. North Georgia Pipeline, Inc. is currently looking for an experienced Civil Construction Project Manager to join our fast-growing team. The Project Manager will be responsible for organizing, managing, and planning complex construction projects. Salary Range: $85,000-$115,000 per year Supervisory Responsibilities: • Work alongside a team of superintendents to ensure projects are completed on time and to specifications., • Delegates work and assignments to team members based on expertise, work experience, and time constraints. Duties/Responsibilities: · Develop project plans, including timelines, resource allocation, and sequencing of work activities. · Create and manage project schedules, ensuring milestones are met. · Coordinate with design teams, engineers, and subcontractors for sitework requirements. · Prepare and manage project budgets, ensuring that costs remain within approved limits. · Monitor and control expenses, ensuring cost-effectiveness without compromising quality. · Review and approve invoices, track project expenditures, and generate financial reports. · Allocate resources, including labor, equipment, and materials, to ensure project efficiency. · Manage procurement of materials, ensuring timely delivery to avoid delays. · Oversee the hiring and management of subcontractors, vendors, and other third-party service providers. · Conduct regular site visits to ensure work is progressing according to plan. · Coordinate on-site activities, ensuring that work complies with design specifications, codes, and safety standards. · Solve any on-site issues that arise, adjusting schedules and plans as necessary. · Conduct regular site visits to ensure work is progressing according to plan. · Coordinate on-site activities, ensuring that work complies with design specifications, codes, and safety standards. · Solve any on-site issues that arise, adjusting schedules and plans as necessary. · Ensure that all site activities adhere to safety regulations and industry standards. · Implement safety programs, conduct safety meetings, and ensure that all workers are following protocols. · Manage inspections and obtain necessary permits and approvals from regulatory bodies. o Implement quality control processes to ensure that the work meets the required standards. · Conduct regular inspections to verify that construction work aligns with the project’s specifications. · Address any deficiencies or quality issues promptly. · Serve as the primary point of contact for clients, subcontractors, and other stakeholders. · Provide regular updates and reports to senior management, clients, and other stakeholders on project progress. · Facilitate meetings to discuss project status, risks, and any required changes. · Identify potential risks to the project, including delays, cost overruns, and safety concerns. · Develop mitigation strategies and contingency plans to address these risks. · Monitor the project for emerging risks and take corrective action as needed. · Build and maintain strong relationships with clients, ensuring their needs and expectations are met. · Handle client requests, changes, and feedback, ensuring the project aligns with their vision. · Manage stakeholders’ expectations and ensure clear communication throughout the project. · Oversee final inspections and ensure that all punch list items are completed. · Ensure all documentation, such as permits, warranties, and as-built drawings, are finalized and handed over to the client. · Conduct project debriefs to evaluate what went well and identify areas for improvement in future projects. Required Skills/Abilities: • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Thorough understanding of or ability to quickly learn about the project or product being developed., • Proficient with Microsoft Office Suite or related software., • Experience utilizing AutoCAD, AutoCAD 3D, Agtek, Bluebeam, Primavera P6, Navisworks Freedom or Manage desirable. Qualifications: • 1-5 years Project Management experience., • 1-5 years of sitework experience (excavation, grading, installing utilities and drainage), • Bachelor’s degree in civil engineering or related field, which may include Construction Engineering, Business or other. Requirements: • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 20 pounds at times. Featured Benefits: • Medical, • Vision, • Dental, • Employer Paid Long Term Disability, • Employer Paid Short Term Disability, • Employer Paid Life Insurance, • 401(k) Employment Type Full-time Equal Opportunity Employer Certified Drug Free Workplace Employer. This position is subject to pre-emp drug testing.

Cove Architecture is seeking a passionate and forward-thinking Architect III who believes the best design happens when creativity meets capability. Join cove, the world’s first AI-powered, human-centered architecture firm, and help redefine how architects design, collaborate, and lead in the age of intelligent technology. Key Responsibilities: Design & Documentation • Lead design development and construction documentation across multiple projects simultaneously, leveraging AI as your collaborative partner., • Create inspiring, functional spaces across a variety of typologies, including residential, commercial, hospitality, and adaptive reuse., • Collaborate with Project Architects through all phases—from schematic design through construction administration., • Work in a hybrid human-machine workflow that enhances design thinking while AI supports coordination, compliance, and documentation. Project Collaboration • Partner with multidisciplinary teams of architects, designers, engineers, and consultants., • Coordinate with clients, contractors, and permitting agencies to ensure smooth project delivery., • Participate in design reviews, client presentations, and project meetings., • Contribute to design direction and problem-solving within project teams. Professional Growth • Develop project management skills under the mentorship of senior architects., • Build a portfolio of award-worthy, published projects., • Participate in cove’s licensure support program (ARE study resources, exam fees, and paid study time)., • Learn and apply emerging AI tools that are reshaping the architecture industry. Knowledge Sharing • Mentor junior staff and interns to foster team growth., • Collaborate with cove’s engineering team to improve internal AI tools., • Contribute to cove’s design culture through presentations, workshops, and research. Qualifications: • 5+ years of professional experience in an architectural office, • Professional degree in Architecture (B.Arch or M.Arch)., • Actively pursuing or recently obtained architectural licensure (ARE support provided)., • Strong design sensibility and a portfolio that demonstrates creativity and technical competence., • Proficiency in Revit, AutoCAD, or similar design software., • Strong communication and collaboration skills across multidisciplinary teams., • Ability to manage multiple projects and deadlines while maintaining design quality., • Enthusiasm for technology and optimism about AI as a creative design partner., • Legally authorized to work in the United States. Preferred Qualifications: • Experience with high-end residential, commercial, mixed-use, or hospitality projects., • Published work or design awards (student or professional)., • Interest in sustainable design, adaptive reuse, or innovative building technologies., • Experience mentoring or teaching within the design community., • Passion for both design excellence and operational efficiency. Location: This is a hybrid position based in Atlanta, GA, with Tuesdays and Thursdays in-person for collaboration, mentorship, and training. What’s In It for You: • 100% Employer Paid Health insurance, • Vision and Dental benefits, • Employer-paid public transit pass and biking stipend, • Competitive Pay, • Work-Life Balance, • Onsite Gym membership, • Hybrid Work, • Unlimited Paid time off and holidays, • Snacks, beer, team events cove is proud to recruit and hire talented people from a wide variety of backgrounds and experiences. We do not discriminate on the basis of race, color, national origin, gender, religion, sex (including pregnancy, sexual orientation, gender identity or transgender status), age, or disability.

We’re looking for a Interior Designer to join our dynamic team in our Atlanta, Georgia office to work on projects such as manufacturing, education, commercial, etc. The position is hybrid but remote may be considered for strong candidates. BRPH is a technically focused, creative architecture, design, engineering, construction services and mission solutions firm providing innovative solutions to mission-driven clients in the aerospace, defense, education, manufacturing, commercial, entertainment and hospitality market sectors. Founded in 1964, BRPH is consistently ranked among the nation’s top firms and has completed a wide range of projects across the United States and throughout the world. SUMMARY: Individual has the ability to provide leadership in design direction and strategy, develop functional requirements and project-design criteria for a wide variety of building types and design complexities. Requires substantial knowledge of design and planning principles, building and planning code requirements, specifications preparation and negotiation. Individual directs work efforts of others, develops detailed design concepts, produces contract documents, interprets ordinances, and communicates client needs. Works directly with clients on projects of any size. Tackles more complex space planning challenges, optimizing functionality and flow in various environments. Integrates sustainable design principles and practices into projects where applicable. Ability to identify and mitigate potential project risks, ensuring successful project outcomes. There is a focus on recruiting, training, and building a cohesive design team, fostering a collaborative and innovative studio environment. Contribute to business development efforts by networking, participating in client pursuits, and preparing proposals. ESSENTIAL DUTIES AND RESPONSIBILITIES: • May serve as prime contact of firm with clients, consultants, and public agencies., • Provide leadership in project design., • Prepare and conduct client interviews. Consolidate information into a Program Document outlining square footage and personnel requirements., • Initiate preparation of FF&E and Equipment List gathering electrical, plumbing, and special requirements from client., • Proficient in preparing Schematics, to include Block & Stacking Plans., • Proficient in Space Planning., • Proficient in development of FF&E Specifications., • Proficient in preparing a complete set of Construction Documents., • Responsible for technical implementations of design concepts during construction documents, specifications, building, & construction administration., • Responsible for code compliancy as it relates to ADA and Life Safety. All plans to be reviewed and coordinated with Architect of record throughout the design process, (schematic through final construction documents)., • Prepare reports and specifications., • Provide coordination of all applicable project discipline’s drawings., • Establish and monitor outside consultants., • Has working knowledge of computer aided design drafting to produce designs into routine final drawings., • Prepares digital presentations inclusive of physical material palettes., • Has excellent understanding and knowledge of construction techniques and constructability as it relates to interiors; flooring, partitions, ceilings, and other finish materials., • Visits construction site to review, monitor, and report progress and perform other construction administration duties, such as shop drawings review, attend construction site meetings, review RFI’s, prepare ASI’s, PR’s, prepare status reports, per the contract documents., • Review and monitor quality of outgoing submittals. Responsible for job specific standards, practices, and quality, as defined in BRPH System Manuals., • Review project schedule & budget worksheets., • Assist client in selection & procurement of furniture through development and coordination of furniture bid document. Further assist client in evaluation of pricing and awarding of bid. Upon completion of installation prepare furniture punch list and track outstanding satisfaction., • Follow-up with client after occupancy to confirm client satisfaction., • Maintain and monitor project profitability., • Assists in development of project scopes, schedules, and budgets., • Coordinates manpower allocations as it pertains to assigned projects., • Attends recurring scheduled meetings with studio and practice., • Encourage continuing education efforts among team and personnel professional growth., • Promote mentoring within Interior Design studio/practice. Specifically, to include support and encouragement for NCIDQ certification., • Maintain administrative / technical documents required by leadership, accounting, or others, as it pertains to the management of Interior Design projects., • Review monthly project billing invoices to confirm correct manpower & reimbursable charges., • Follow-up with client questions pertaining to billing invoices and confirm final payment with accounting., • Review employee timesheets as it pertains to assigned projects., • Participates in marketing efforts and client presentations., • Maintain client relationships and develop new revenues thru continuing services., • General knowledge of preparation and use of interior design / architectural contracts., • Identify modifications of project scope as described in the legal contract and pursue additional services when acceptable. COMPUTER SOFTWARE SKILLS: Must be proficient in the use of: • AutoCAD, • Revit, • Microsoft Office: Word and Excel, • Adobe: Photoshop and InDesign, • Sketch-Up, • Four-year degree in Interior Design from a CIDA accredited college or university. Meet qualifications for taking the NCIDQ exam. PHYSICAL REQUIREMENTS: Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job description may be changed to include new responsibilities and tasks or change existing ones as management deems necessary. EOE/AA/MFDV

Berkel & Company Contractors, Inc. is seeking a Survey Technician for our regional office located in Atlanta, GA. This field-based position will support projects related to Auger Pressure Grouted Piling, Displacement Piling, Driven Piling, Pressure Grouting, Sheeting and Shoring, Ground Improvement and Micro Piling located across the Southeast. This position ensures all required layout and as-builts for a given project are performed accurately and promptly to support Berkel’s ongoing projects. Our survey technicians are expected to have competent technical knowledge and strong attention to detail. This position offers the opportunity for growth into quality control supervisory roles. Responsibilities include, but are not limited to: • Compute coordinates for use in layout., • Perform field layout and as-builts., • Preparation of detailed as-built reports., • Coordinate with project managers and superintendents to ensure accurate and timely completion of survey tasks., • Perform analysis of survey data and assist in the resolution of any discrepancies in measurements or documentation., • 2+ years’ experience as a Survey Technician or in a similar role., • Experience in preparing survey documents and conducting fieldwork., • Experience with industry software, including but not limited to, AutoCAD, Revit, Bluebeam, and Microsoft Office programs., • Based on experience. EOE/Minorities/Females/Veterans/Disability (Compliant with the new VEVRAA and Section 503 rules

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The Senior Virtual Design and Construction (VDC) Engineer will become a strategic asset within a growing business unit and the key member of our project teams for the most creative builder in America. As part of VDC team you will be involved in a range of activities throughout the design-build cycle that are essential for a successful project delivery. These activities include support and implementation of Clayco’s Digital Practice Technology in a variety of tasks as they relate to design analysis, design process, pre-construction, construction, and the facility handover. This is a critical support role with opportunity to become one of our VDC industry experts. The Specifics of the Role • Provide assistance to design build team to facilitate 3D and 2D coordination., • Liaison with the design team and project subcontractors through multitude of BIM centric activities., • Provide technical support for a range of application used in-house., • Assist Pre-Con with quantities extraction and scheduling., • Assist and coach the project teams in the use of companywide BIM best practices., • Coordinate 3D content modeled by others and model any content not provided., • Perform 4D virtual building analysis on model working closely with scheduling, project managers, and superintendents., • Perform 5D virtual building analysis in close collaboration with the estimating team., • Perform and document collision detection on virtual building model as well as assist in conflict resolution., • Perform material quantity take-off of building model for conceptual estimating purposes utilizing leading edge BIM technologies., • Manage model changes through design updates and as built conditions., • Serve as the information manager and content gatekeeper for the duration of project. Requirements • 3-5 years’ experience in AEC industry, in particular MEP coordination., • Bachelor’s Degree in Construction Management, Engineering, Architecture., • Minimum 3 years of experience with VDC/BIM related processes., • Solid knowledge of construction principles/practices required., • Advanced proficiency with Autodesk Building Design Suite (Revit, Assemble Systems, AutoCAD, Navisworks, 3DS Max), Reconstruct, VICO Office, and BIM 360 cloud-based technology. Some Things You Should Know • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? • 2024 Best Places to Work – Crain’s Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job DescriptionDescriptionAlta Planning + Design seeks an Associate Landscape Architect for our Atlanta location. Alta’s landscape architecture practice is dynamic and diverse, contributing to projects at a variety of scales with a people-centered approach to our work. We consider ourselves connectors of people and place, and we work directly with local communities on data-driven, engagement-centered designs. Through all of our projects at Alta, we aspire to promote environmental harmony and resiliency, social capital, and equity through design excellence. This position is a great opportunity for someone who shares these values and who is interested in an interdisciplinary project environment working on a range of project types, from parks to streetscapes to greenways. About Alta Alta Planning + Design is a sustainable transportation company dedicated to creating active, healthy communities through planning, landscape architecture, engineering, and education/encouragement programs. Alta was founded in 1996 when communities were calling for safer streets for people walking and bicycling as the non-motorized transportation movement developed into a profession in the United States. We pioneered the field of active transportation, evolving our planning and design work into a visionary global practice that empowers people to live active, healthy lives and gets them to where they need to go. Our core values and work bring about positive change by creating places that are geared toward moving people rather than cars, connecting community members to daily needs and human experience, and empowering every person to live an active healthy life. As a global leader in mobility innovation for over 27 years with over 225 staff, we are dedicated to connecting people to places by working across disciplines and scale to address social justice, safety, and environmental resilience. Day to DayIn this role, you’ll be a design contributor and production manager on a variety of corridor and recreation projects. This may include concept-level design efforts such as Complete Streets or greenway corridor studies, to detailed development of construction documents and cost estimates for parks and open space. It is expected that Associate I Landscape Architects have some level of experience managing production or projects. Participation in fieldwork and public meetings is also to be expected. Designers will be challenged to think at a variety of scales from the systems-level down to specific sites or intersections. Designers who enjoy working closely with other disciplines will appreciate Alta’s interdisciplinary approach that encourages collaboration with our planners, engineers, graphics designers, outreach specialists, and data analysts. QualificationsRequired This position requires a combination of skills, experience and education including, but not limited to • Passion for Alta’s mission, • Bachelor’s or Master’s degree in Landscape Architecture or related field of study., • 7 or more years of experience in a consulting environment or public entity, • Experience in active community design and planning., • Demonstrated understanding of street and trail design principles and a general understanding of project management principles, methods and techniques., • In-depth knowledge of the principles of site grading and general construction techniques., • Ability to critique and provide design direction on photo-renderings, concept sketches, construction drawings and other similar materials for use in proposals and project deliverables., • Ability to effectively read, understand and utilize technical drawings, maps, and other similar documents., • Ability to guide staff members and manage internal team expectations., • Exhibits strong initiative and ability to capitalize on opportunities to enhance Alta’s position in the marketplace., • Ability to manage competing priorities, multiple simultaneous projects involving cross-functional project teams within budgetary and schedule constraints., • Ability and willingness to travel., • Excellent professional ethics, leadership skills, accountability, and decision-making capabilities., • Good presentation skills., • Proficiency in an enterprise-wide resource planning and project management tool. There are a number of additional skills, experience, and education that would be beneficial to this position including, but not limited to:, • Licensed Professional Landscape Architect, • Experience managing projects for both private and public clients., • Experience writing and/or presenting white papers and/or providing expert level presentations at conferences and other events., • Proficiency in AutoCAD, Adobe Creative Suite, Civil 3D, Photoshop, ArcGIS, SketchUp, GoogleEarth GIS, or similar products., • In-depth knowledge of NACTO, MUTCD, ADA, and relevant state DOT design requirements., • Experience using Deltek Vision., • Active participation in industry-relevant professional associations and committees. CompensationThe pay range for this job in Atlanta is $80,000 - $102,000 annually. Placement within the range is based upon experience, skill-sets, and qualifications. BenefitsAlta offers comprehensive benefits to all full-time employees: • Medical: PPO or HSA medical plans, • Dental/Vision: PPO, • Life Insurance: Alta pays 100% of the premium for life and AD&D, equal to your base compensation, • 401(k): Alta provides a match up to 3%, • PTO: 21 days accrued annually to start, • Holidays: 11 total company paid holidays, • Paid Parental Leave/Short-Term Disability, • Additional Benefits: Wellness reimbursement up to $800 annually, Alta Gets Around benefit of up to $900 annually, 5-year travel award, and professional development opportunities#LI-CL1

Job Description This role is paying $25 an hour working 40 hours a week at minimal starting immediately. MUst be flexible to work any shift due to shift placement being based on Seniority and have a clean criminal background. If interested please give Mariah a call at 770-934-1710 and send your résumé to Mariah corporatetemps.com immediately with your electro technician experience, we look forward to working with you. Duties are listed below 1.performs a variety of repetitive and non-repetitive tasks associated with electrical design and electro-mechanical testing of new equipment and new product prototypes. • Communicates with internal and external customers., • Provides technical assistance to other personnel in the operation of computers, electronic equipment and various test applications., • Performs first level testing, using standard equipment, and analyzes results to evaluate performance and determine need for adjustments., • Builds, operates and modifies non-standard equipment and test fixtures. May recommend new equipment materials or procedures to improve product quality or reliability., • Travels to various field site locations to assist with evaluation of system start-ups., • Programs integrated circuits (ic chip, eprom, etc.)., • Performs mechanical calibration of systems and equipment., • Develops fixturing and schematic drawings., • Install, maintain, and troubleshoot electrical systems and components, particularly in low voltage environments., • Calibrate and test equipment using precision measuring instruments to ensure optimal performance., • Work with logic controllers to program and troubleshoot automated systems., • Conduct vision inspections to assess the quality of electrical installations and repairs., • Utilize AutoCAD for designing and modifying electrical schematics as needed., • Provide exceptional customer service by addressing client inquiries and resolving issues efficiently., • Collaborate with team members to militarise systems for enhanced operational efficiency., • Strong mechanical knowledge related to electrical systems and components., • Proficiency in working with low voltage applications., • Experience in calibrating equipment using precision measuring instruments., • Familiarity with logic controllers for programming automated processes., • Excellent customer service skills to effectively communicate with clients and address their needs., • Knowledge of vision inspection systems for quality assurance in electrical work., • Ability to militarise systems for improved functionality and performance., • Proficient in AutoCAD for creating and modifying technical drawings. Job Type: Full-time

Culture We are a team of engineers, managers, and builders who are down to earth and stand behind our word. We value respect and honesty, finding a better way, dirty boots, and a job well done. We trust our people to persevere and do their best for one another and for our clients. In return, we will make their time with us worthwhile. Most importantly, our people count on and believe in one another and know our success depends on our frontline workers building great projects that reflect our values and vision. Role Overview The Senior Project Manager is responsible for the execution and oversight of concrete formwork projects and ensures productivity, quality, cost control, and safety. This role involves supervising Assistant Project Managers and collaborating with subcontractors and vendors to support operational efficiency. Primary Responsibilities • Oversees and coordinates the planning and implementation of concrete formwork projects., • Oversees jobsite inspections/audits of shoring, rebar/post-tensioning installation, safety, and quality., • Responsible for managing the project productivity, costs, quality and safety consistent with company policies and practices., • Oversees management of assigned projects including working with local team to develop processes for delivering total concrete solutions., • Supervises the activity and development of Assistant Project Managers., • Develops and maintains customer relationships to enhance company’s ability to procure projects, reduce risk, and ensure operational efficiency., • Oversees the monitoring of the overall safety and quality issues on the project., • Manages the development and coordination of material and equipment schedules to maximize efficiency., • Bachelor’s degree in civil engineering, Construction Management, related degree and/or equivalent work experience., • Minimum seven years’ work experience performing similar primary position responsibilities exceeding performance expectations., • Advanced written, verbal and interpersonal communication skills to effectively work with all levels of the organization., • Inclusive Medical, Dental, Vision, Accident, and Illness insurance, • Company paid Disability and Life insurance, • Health Savings Account contribution of up to $1,000 per year, • 401(k) retirement savings program with a company match, • Employee Assistance Program including discounts with major vendors & products, • Mental and physical wellness programs, • Competitive time off package including vacation, sick, and holiday pay, • Career advancement opportunities with a stable well-established organization, • Tuition reimbursement program and access to LinkedIn Learning course *Applications without an attached resume will not be considered. **CSG/Ceco Concrete Construction does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CSG/Ceco Concrete Construction without a prior written search agreement will be considered unsolicited and the property of CSG/Ceco Concrete Construction. Ceco Concrete Construction is an Equal Opportunity Employer. Qualified candidates will be considered without regard to race, sex, disability, veteran status, sexual orientation or gender identity.

The ideal candidate would be highly trained, experienced, and dedicated teams in Controls: PLC and HMI Programming and Full Plant Support Controls: PLC and HMI Programming and Full Plant Support Software: (Step 7, TIA Portal) Hardware: AutoCAD a plus Our client’s engineers work in a variety of environments and locations. The role requires strong technical knowledge, sound experience, and people-skills, to effectively solve issues as they arise. What you will be doing: • Creating and commissioning industrial controls systems, PLC software design, and HMI screens, for different industries and environments., • Responsible for PLC/HMI code development, code installation, debug on job site, and commissioning of the complete system., • Conducting the peripheral device programming, machine PLC programming, coordinate the machine debug, power-up, and machine validation with build and electrical teams., • Ensure that systems are designed and programmed to customer and/or DyAG build specifications using standard techniques and approaches., • 10 years of Controls Engineering/PLC programming experience, • 10 years of Siemens PLC and HMI programming experience is a plus., • The ability to program/write code/ladder logic from scratch, • Prior experience with automotive manufacturing integration, • Prior experience programming within customer-defined standards and templates, • Proficient with a variety of field bus networks including but not limited to DeviceNet, Ethernet I/P, Profibus, ProfiNet, etc., • Prior experience with automotive manufacturing integration, • Creating and commissioning industrial controls systems, PLC software design, and HMI screens, for different industries and environments., • Responsible for PLC/HMI code development, code installation, debug on job site, and commissioning of the complete system., • Conducting the peripheral device programming, machine PLC programming, coordinate the machine debug, power-up, and machine validation with build and electrical teams., • Ensure that systems are designed and programmed to customer and/or DyAG build specifications using standard techniques and approaches., • 10 years of Controls Engineering/PLC programming experience, • 10 years of Siemens PLC and HMI programming experience is a plus., • The ability to program/write code/ladder logic from scratch, • Prior experience with automotive manufacturing integration, • Prior experience programming within customer-defined standards and templates, • Proficient with a variety of field bus networks including but not limited to DeviceNet, Ethernet I/P, Profibus, ProfiNet, etc., • Prior experience with automotive manufacturing integration, • Prior experience programming within customer-defined standards and templates

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Permit Supervisor (Drafting) who plays a critical role in managing the permitting workflow and ensuring compliance with all applicable Federal, State, County, and Local regulations. This role requires advanced expertise in AutoCAD principles and standards, as well as Rights-of-Way permitting. The Supervisor is expected to lead the technical and administrative processes involved in the acceptance, preparation, drafting, review, and approval of permit drawings, supporting efficient and compliant project execution. Responsibilities • Oversee daily operations of the CAD team, including workload allocation, priority setting, and one-on-one meetings., • Provide constructive feedback, conduct performance evaluations, and create career development plans., • Lead hiring, onboarding, and team-building initiatives to foster a high-performing culture., • Develop, document, and enforce CAD standards covering layers, naming conventions, annotations, plotting protocols, and file structures., • Maintain the CAD Standards Manual and conduct regular audits to ensure compliance., • Implement drawing checklists, redlining/review cycles, and approval workflows to ensure accuracy and consistency., • Ensure compliance with industry standards such as NCS, ISO 128, and ASME Y14.5., • Identify process inefficiencies and apply lean methodologies and process mapping for continuous improvement., • Lead automation efforts using tool palettes, LISP routines, sheet set workflows, and custom macros., • Strategically plan resources and estimate drafting hours to align with project timelines., • Monitor KPIs such as on-time delivery, rework rates, and first-pass approval; implement corrective actions as needed., • Collaborate with engineers, architects, and project managers to align scopes, resolve design conflicts, and manage changes., • Maintain accurate drawing revisions and change logs for stakeholder visibility., • Curate and maintain standardized blocks, dynamic blocks, detail libraries, templates, and plot styles., • Ensure version control and accessibility of shared content across teams and locations., • Develop and deliver training programs, lunch-and-learns, SOPs, and reference materials to upskill the team., • Provide advanced CAD support and coordinate with IT to resolve technical issues., • Define structured project folders, naming conventions, archiving protocols, and backup/versioning practices., • Manage data integrity and access permissions within PDM/CDE environments., • Plan and coordinate software upgrades (e.g., AutoCAD), licensing, and feature testing., • Perform other related duties as assigned by management. Qualifications • 6+ years of professional CAD drafting/design experience, including 2+ years in a lead or supervisory role managing CAD teams and workloads., • Expert-level AutoCAD proficiency: dynamic blocks, xrefs, Sheet Set Manager, fields, parametric constraints, paper/model space best practices, and CTB/STB plotting., • Proven CAD standards development and enforcement: templates, layers/naming per NCS or equivalent, annotation styles, title blocks, and periodic standards audits., • Strong QA/QC capability: drawing checklists, redline/review workflows, approval gates, and familiarity with relevant codes/standards (e.g., ISO 128, ASME Y14.5/GD&T), • Automation/customization skills: AutoLISP/macros, and/or .NET/C#/Python scripting for tooling, batch routines, and productivity improvements., • Working knowledge of adjacent platforms and interoperability: Revit, Civil 3D, Plant 3D, Navisworks, IFC/DGN/DWG exchange, and coordinate systems., • Document and data control expertise: versioning, naming conventions, libraries (blocks/details), and experience with PDM/EDMS tools (e.g., Autodesk Vault, ProjectWise), • People leadership and coaching: onboarding, mentoring, performance feedback, conflict resolution, and running stand-ups and 1:1’s., • Project management fundamentals: scoping CAD tasks, estimating hours, scheduling, prioritizing multi-project pipelines, and managing change control., • Clear communicator with strong stakeholder skills: cross-discipline coordination with engineering/field teams, and ability to author SOPs, training materials, and reports for leadership. Shift is full-time Monday – Friday between the hours of 8:00 am – 5:00 pm PST. Must be flexible and willing to work outside normal business hours as necessary. Benefits: healthcare, retirement, paid leave (e.g., sick leave, PTO, company holidays), life insurance, AD&D, short-term disability, FSA, education reimbursement, wellness reimbursement, and employee assistance program (EAP).

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking OSP Design Engineers to assist with the design and production of engineering deliverables on complex overhead and underground utility distribution projects. This position may require interfacing with utility clients, customers, and the potential for collaboration with multiple offices. Responsibilities • Assist in the preparation and development of distribution voltage construction packages for both overhead and underground projects, including distribution equipment installation, feeder replacement, cable replacement, and new feeder design., • Design aerial path based on field data and engineering best practices., • Ensure that all designs and new attachments satisfy utility standards and relevant codes (E.G. NESC / GO95 standards)., • Review utility poles and field notes to determine most accurate make ready solution., • Research and document requirements on aerial construction by pole owner or customer for whom the work is being performed., • Act as a Subject Matter Expert for Pole Loading Design and Analysis, both internally and externally to CCI’s customers., • Determine Right of Way (ROW) locations., • Determine the correct customer template to be used in the creation of construction and permitting drawings., • Complete ROW permitting and submittal as needed on behalf of the facility owner., • Confirm all deliverable documents are complete at project handoff with minimal direction., • Meet with Project Designers to review project data and the ability to input that data into OCALC or similar software., • Perform other duties and responsibilities as assigned., • Ensure confidentiality of company and customer information., • Create and promote the company image through exercising sound and ethical business practices as related to employees, the public and customers. This includes ensuring that the service and quality provided to customers is satisfactory., • Other duties as assigned by management. Qualifications we are looking for • 3 years’ relevant electric utility distribution design experience required., • Proficient with pole loading analysis software (e.g., O-Calc Pro, Katapult, PoleForeman, Spidacalc, PLS-Pole) required., • Complete the design of OSP projects, aerial, buried, and underground using AutoCAD, Adobe, GIS, and Excel with minimal direction., • Experience with utility engineering, Communications, Power Distribution, and Gas., • Experience in the Utility industry, permit completion and coordination., • Basic understanding of utility design, engineering concepts, and design tools., • Demonstrated track record of process improvements using new techniques, technology, or concepts., • Strong interpersonal and communication skills, with a demonstrated ability to work well and efficiently with a wide variety of people., • Strong organizational skills that reflect ability to perform and prioritize multiple projects seamlessly with excellent attention to detail and ability to meet strict deadlines., • The ability to work independently with minimal supervision; highly responsible, resourceful, and self-motivated., • Strong analytical, critical thinking, and problem-solving skills., • Able to meet strict deadlines., • Ability to embrace corporate values, understand the company vision, and exemplify CCI leadership behaviors. Shift is full-time Monday – Friday between the hours of 8:00 am – 4:00 pm CST. Must be flexible, and willing to work outside normal business hours, as necessary. Additional Information • Occasional travel may be required., • Must have a valid driver’s license and good driving record. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.

Job Description Data Center Construction Project Manager - Owner's Rep - Atlanta, GA This opportunity is with a leading provider of mission-critical data center solutions as an Owner's Rep for Construction Services. This firm provides a complete life cycle of solutions that are custom-fit to the requirements of their client's mission-critical facilities. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. They build mission-critical facilities for data center facilities nationwide for Enterprise, Colocation and Hyperscale Companies. We are looking for a Data Center Construction Project Manager to support critical facility construction projects. The Construction PM will be responsible for all aspects of managing a data center construction project and act on the Owner's behalf. This will include providing leadership to contractors and vendors associated with the delivery of company projects. The candidate will have overall responsibility for the delivery of assigned projects on budget on time and assurance that the project scope and quality meet Company Design Standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back office work (change orders, budgets, paperwork driven, etc.) Responsibilities: • Maintain liaison with various contractors and vendors in order to manage the day to day activities that impact the delivery of company's critical facilities construction projects, • Ensure that all day to day project responsibilities are met by the contractors and vendors on the project, • Manage multiple projects simultaneously. Responsible for negotiating contracts with vendors as necessary. Responsible for creating and managing project schedules, • Put together Project plans – size up, costs, budget, scheduling, timeline, manage change orders, etc., • Assists with reporting and RFPs to Contractors, • Deliver Built to Suit projects with a heavy emphasis on value-engineering, • Drive Company Standards uniformly as it regards to Project Delivery by all project participants on all projects, • Manage financial aspects of contracts (progress billing, rental equipment, income / expenses) to protect the company's interest and simultaneously maintain good relationship with the client, • Represent the company in project meetings, • Act as key Liaison with managers of all company departments, • BA / BS a plus, • Experience managing Data Center Construction Projects as an Owner or as a General Contractor, • Experience managing a budget, • Minimum of 10 years relevant experience in the Data Center Construction Industry, • Belong and Attend professional organizations such as AFCOM, ASHRAE, 7x24 exchange, PTC, Datacenter Dynamics / DCD, Uptime, iMasons, Bisnow etc., • Client Facing /Client relationship / Client Management skills, • Must be familiar with the design process of building systems for data center and mission critical projects, • Solid Construction Project Management experience, • Effective Communicator – emails, phone and face to face, • Ability to work independently, • Travel as needed to project sites, • Solid Admin skills, • Computer savvy: MS Project, Excel, P6 Oracle Primavera, AutoCAD a plus After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionDescription: Controls Field Technician III is a senior technician within CLX Engineering. A Controls Field Tech III has to be able to troubleshoot PLCs and handle other electrical tasks. Ideal candidates are comfortable working in high pressure situations and interact with both external and internal customers to efficiently resolve problems and complete projects. Field Tech IIIs must be able to work effectively with lead Integration Engineers and communicate efficiently with all project stakeholders to ensure the smooth completion of projects. RESPONSIBILITIES: • Extensive ability to read electrical schematics, troubleshoot issues, and produce electrical prints in design, • Extensive ability to create control panels from electrical prints, • Ability to provide and execute ideas that make control systems more efficient, • Ability to observe systems, locate and resolve issues with control components, • Knowledge of electrical and controls devices and their application in systems, • Knowledge of safety practices (use of PPE, situational dangers), • Proficient use of hand and powered tools (screwdrivers, wrenches, drills, grinders, etc.), • Competent use of electrical testing devices (multi-meters), • Knowledge of common computer software (Microsoft Office, internet, etc.), • High school diploma or AS Degree with equivalent, applied experience, • 5 years experience in the electrical field, • Excellent communication skills with the ability to stay calm in high-pressure situations, • Ability to drive and have a clean driving record, • Ability to work non-standard hours (nights and weekends), • Ability to get a passport and pass a background check, • Ability to pass initial and random drug screenings, • Present a professional demeanor and appearance DESIRED QUALIFICATIONS: • AutoCAD, • Bachelor’s degree in Electronics Engineering or equivalent

Job Description Job Title: Survey Project Manager *Work Location: Atlanta, GA * Salary: Based on experience and will be discussed with manager in interview Relocation assistance or sign-on bonus available Duties/Responsibilities: • Will assist the Department Head in preparing proposals, estimates, presentations, employee evaluations, and the recruiting process., • SIT or LS required, • Proficiency in CAD, Least Squares Reduction and other Survey Software, • Experience with GIS platforms is desirable, • Experience with Robotic Total Stations, GPS (including post processing)., • Experience with scanners, drones, and other emerging technologies is desirable, • Should be registered in Georgia or the ability to become registered within a year as a Land Surveyor., • A demonstrated record of success on ALTA, route/database, boundaries, topographical, inventories, and other types of surveys, • Coordinates with office staff and clients as required., • Create and manage project budgets, schedules and resource allocation, • Must have project management experience, • Participate in pre-survey planning meetings with project managers, resident engineers, and contractor representatives., • Adheres to local, state, and federal survey regulations as well as Accura Engineering procedures. Education/Experience: • Bachelor’s Degree in Land Surveying, Civil Engineering, or related field from an accredited program or a scientific area and/or equivalent work experience preferred. Will accept two year degree plus experience., • Must be Professional Land Surveyor in Georgia, other states licenses are desirable, • Georgia Department of Transportation (GDOT) experience required, • 10+ years of experience managing survey projects of varying sizes and complexity., • 8+ years of experience in land surveying, • SIT license, • 107 Remote Pilot’s Certification a plus, • Advanced knowledge and experience with AutoCAD and Carlson, • LiDAR collection and software experience (TopoDOT and Pix4D) a plus, • Experienced with GDOT MicroStation/Open Roads Design (ORD) desirable, • Working knowledge of GDOT SUE process desirable, • Must have a valid driver’s license and be insurable Benefits: • Competitive salary based on experience., • Comprehensive health, dental, and vision insurance., • Retirement savings plan with company match., • Paid time off and holidays., • Professional development and career advancement opportunities., • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. Company DescriptionAccura Engineering specializes in providing engineering, construction inspection and management and environmental services to federal, state and local clients. As a federal contractor, Accura Engineering completed projects for the US Department of Defense including the Army Corps of Engineers, Army, Navy and Air Force for more than 10 years. We also work with other federal agencies including NASA, GSA, Bureau of Prisons, Environmental Protection Agency, among a few. As a state and local contractor, Accura has completed projects for Georgia Department of Transportation as well as numerous cities and counties.Accura Engineering specializes in providing engineering, construction inspection and management and environmental services to federal, state and local clients. \r\n\r\nAs a federal contractor, Accura Engineering completed projects for the US Department of Defense including the Army Corps of Engineers, Army, Navy and Air Force for more than 10 years. We also work with other federal agencies including NASA, GSA, Bureau of Prisons, Environmental Protection Agency, among a few. As a state and local contractor, Accura has completed projects for Georgia Department of Transportation as well as numerous cities and counties.

Job Description CNC Machinist XL Machineworks is looking for a trained CNC Machinist eager to learn and grow in a company machine shop that is part of a larger industrial facility. Exceptional pay with full health insurance and a flexible work schedule. Lots of room for growth and bonus pay based on performance. Qualifications: • Candidate must have high school diploma or equivalent and completion of a minimum of vocational training or an apprenticeship, or 2+ year’s experience and be able to wear many hats (including grinding as needed)., • High level of manual dexterity and detail orientation, • Ability to use precision measuring (calipers and probes) and portable coordinate measuring equipment tools to take accurate measurements., • Knowledge of CNC G&M Code manual input for machine controls, • Experience using forklifts and cranes preferred, • Strong shop-math skills, • Familiarity with Microsoft Office, • Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language, • While performing the duties of this job, the employee is regularly required to stand for extended periods of time. The employee is frequently required to use hands to finger, handle, or feel objects, tools, or controls and to climb or balance. The employee is frequently required to walk; reach with hands and arms; stoop, kneel, crouch or crawl; and talk or hear. The employee must regularly lift and move up to 10 pounds, frequently lift and move up to 25 pounds, and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus., • Will operate the following: • 2 Haas CNC mills (including 5 axis), • Manual mills and lathes, • Hand saws, band saws, drill presses, and other shop equipment • Primarily internal job shop- all custom orders- not a high production facility, • Detail oriented and must enjoy making one-offs per customer requirements, • Strong with close tolerances, understands GD&T We have advanced CNC machinery capable of handling projects of many sizes. Our Haas VF-6 has a 64" x 28" table. Our Expertise: Mechanical Engineering and Electrical Engineering staff with extensive machining and fabrication experience SolidWorks Professional designer for solid modeling, mold design, FEA analysis, etc. AutoCAD 2013 designers for mechanical and electrical design Extensive CAD/CAM expertise Precision Machining Prototype and Large Production Run Capabilities Competitive Pricing and Quantity Discounts What can we offer? Start to Finish Prototpying: Full Service Mechanical Engineering and Modeling, CAD/CAM, and Precision Machining in almost any material AutoCAD, Solidworks, etc. Fast Turnaround: Engineering is always on staffWe offer Full Service Engineering and Machining Solutions:\r\nOur goal is to provide our customers with top of the line service at a reasonable price and in an acceptable time frame.\r\n\r\nWe have advanced CNC machinery capable of handling projects of many sizes. Our Haas VF-6 has a 64" x 28" table.\r\n\r\nOur Expertise:\r\nMechanical Engineering and Electrical Engineering staff with extensive machining and fabrication experience\r\nSolidWorks Professional designer for solid modeling, mold design, FEA analysis, etc.\r\nAutoCAD 2013 designers for mechanical and electrical design\r\nExtensive CAD/CAM expertise\r\nPrecision Machining\r\nPrototype and Large Production Run Capabilities\r\nCompetitive Pricing and Quantity Discounts\r\n \r\n\r\nWhat can we offer?\r\nStart to Finish Prototpying: Full Service Mechanical Engineering and Modeling, CAD/CAM, and Precision Machining in almost any material\r\nAutoCAD, Solidworks, etc.\r\nFast Turnaround: Engineering is always on staff

Job Description Project Manager – Water Resources Engineering Atlanta, GA (Chamblee) | Hybrid Flexibility Available Experience: 8+ Years | PE Required Position Overview We are seeking an experienced Project Manager – Water Resources Engineering to lead and grow water resources projects within a multi-disciplinary civil engineering environment. This role offers the opportunity to manage high-profile stormwater, drainage, and hydrologic/hydraulic projects while mentoring junior staff and building strong client relationships. The ideal candidate will have deep technical expertise across stormwater master planning, drainage design, H&H modeling, erosion control, and permitting combined with strong project management and leadership capabilities. Key Responsibilities * Manage and execute watershed studies, stormwater master plans, hydrologic and hydraulic analyses (1D/2D modeling), drainage design, stormwater management design, erosion control, and NPDES permitting. * Oversee design and inspection of traditional and green infrastructure / LID BMPs in both urban and rural settings. * Prepare construction documents, specifications, and cost estimates for water resource projects. * Lead FEMA-related studies and Letter of Map Change (LOMC) submittals. * Develop proposals, scopes, and fees; track budgets, schedules, and deliverables. * Coordinate with clients, contractors, agencies, and internal multi-discipline teams. * Provide mentorship, oversight, and training for junior staff and engineers-in-training (EITs). * Conduct site visits, field inspections, and provide construction-phase support. * Maintain effective client relationships while identifying opportunities for additional services. Minimum Qualifications * Bachelor's degree in Civil Engineering or related field. * Professional Engineer (PE) license required (Georgia preferred). * 8+ years of experience in water resources engineering. * Demonstrated experience in: * Hydrologic & Hydraulic Modeling * Stormwater Management design * Green Infrastructure / LID design * Erosion & Sediment Control design * Proficiency in AutoCAD, ArcMap, and H&H software applications. * Strong technical writing and verbal communication skills. * Excellent organizational and time management skills. * Ability to perform fieldwork, including lifting 25 lbs. Preferred Qualifications * Experience working in Georgia and/or South Carolina. * Familiarity with ICPR4, HEC-RAS, XPSWMM, Autodesk Storm & Sanitary Analysis. * Background in water quality or TMDL studies. Compensation & Benefits * Competitive base salary + bonus program. * Condensed work schedule (Mon–Thurs 7:30–5:30, Fri 7:30–11:30). * Comprehensive health, dental, vision, and prescription coverage. * 401(k) retirement plan with employer match. * Generous paid time off and holidays. * Tuition reimbursement (undergraduate & graduate). * Professional development support, in-house continuing education, and software training.

Job Description Job Title :: ENGD1- Engineer 1 (Distribution) Location :: Forest Park-GA Contract :: 12+ Months Skills and Responsibilities · A Distribution Engineer is responsible for designing, planning, and managing the electrical distribution systems that deliver electricity to homes, businesses, and industries. They play a crucial role in ensuring the safe, reliable, and efficient distribution of electrical power. Key Responsibilities: Distribution System Design: Design, plan, and optimize electrical distribution systems including overhead and underground lines, substations, transformers, and other components . Ensure compliance with industry standards and regulations. Network Analysis: Perform load flow analysis, fault analysis, and voltage drop calculations to assess the capacity and performance of the distribution network. Identify and mitigate potential issues. · Asset Management: Maintain accurate records of distribution equipment, perform condition assessments, and recommend maintenance, repair, or replacement of aging or damaged assets. Equipment Selection: Specify and select distribution equipment, such as transformers, circuit breakers, switches, and protective devices, considering factors like voltage levels and load requirements. Safety and Compliance: Ensure that distribution · system designs meet safety standards, environmental regulations, and industry codes. · Collaborate with regulatory authorities for approvals and compliance. Reliability Improvement: Identify opportunities to enhance the reliability of the distribution system, reduce downtime, and improve power quality. · Implement strategies for system resilience. New Connections: Evaluate requests for new electrical connections, assess their impact on the distribution network, and design the · necessary infrastructure to support new customers. Project Management: Manage distribution infrastructure projects from conception to completion. Coordinate with · construction crews, contractors, and vendors to ensure project timelines and budgets are met. Emergencies and Outages: Respond to emergency situations, such as power outages or equipment failures, by conducting rapid assessments and developing solutions to restore power. Data Analysis: Analyze data from monitoring systems, smart grids, and sensors to gain insights into distribution system performance and make data-driven decisions. ualifications: Education: A bachelor's degree in electrical engineering or a related field is typically required. A master's degree may be preferred for more specialized roles. · Professional Licensure: Many Distribution Engineers are required to hold a professional engineering license (PE) or similar · Certifications, which vary by region. Technical Skills: Proficiency in distribution system design software, computer-aided design (CAD) tools, and power system simulation software. · Familiarity with AutoCAD and GIS (Geographic Information Systems) may be beneficial. · Knowledge: In-depth knowledge of electrical distribution principles, grid operation, protection systems, and equipment. · Understanding of regulatory requirements and industry standards. Analytical Skills: Strong analytical and problem-solving skills for assessing network performance, diagnosing issues, and proposing solutions. Safety Awareness: A strong commitment to safety protocols and procedures in designing and maintaining electrical distribution systems. · Project Management: Project management

Job DescriptionSalary: Geek+ is a global leader in robotic solutions for logistics. We develop Autonomous Mobile-Robot (AMR) solutions to realize flexible, reliable, and highly efficient automation for warehouses and supply chain management by automating various laborious tasks like picking, moving, and sorting. We've led the global AMR market share for three consecutive years, being declared the world's no.1 AMR leader. (Source: Interact Analysis). The North American headquarters in San Diego, California will continue to power our growth in Canada, United States, and Mexico. Life at GeekPlus is straightforward. We're a team of geeks who love technology and teamwork. We work together to meet customer needs; we celebrate our wins and learn from our misses. The only thing better than seeing customer operations improved by our technology is seeing it happen at scale! We are biased toward action and getting things done and think differently about how we apply technology. We support each other, and we're empowered to win. Our strength comes from our different backgrounds and perspectives. We are seeking a talented and motivated Solution Engineer to join our dynamic team. As a Solution Engineer at GeekPlus, you'll be the primary point of contact with our partners and clients, who range from startups to Fortune 500 players. You will play a pivotal role in identifying and delivering comprehensive automation solutions tailored to our clients' needs. You'll team up with WMS/WES software Engineers and robotic implementation engineers to ensure the successful deployment of our robot-driven warehouse & manufacturing logistics solutions at customer sites. We want you to talk to us if you're excited about robots and rolling out a complex system! Responsibilities Conduct in-depth consultations with clients to understand their specific warehousing requirements, challenges, and objectives. Serve as a subject matter expert on Geek+ AMR products and solutions. Utilize your expertise to design, customize, and propose automation solutions that align with client needs, budget constraints, and industry best practices. Prepare and deliver compelling presentations to clients, explaining the proposed solutions, benefits, ROI, and project timelines. Align robot-driven solution design with general contractors and/or subcontractors in a project whose design interacts with robotic solutions and may impact overall warehouse/manufacturing logistics operations. Create detailed technical documentation and reports, including solution architecture, diagrams, and system specifications. Provide automation roadmap to customers based on business growth and transformation plan. Stay updated on emerging warehousing automation trends, technologies, and best practices to provide innovative solutions to clients. Requirements Bachelor's Degree in Supply Chain Engineering, Industrial Engineering, or related discipline AutoCAD 2D layout proficiency is required Proven experience in warehousing automation, logistics, or supply chain operations. Strong knowledge of warehousing automation technologies and systems. Exceptional problem-solving and analytical skills. Excellent communication and presentation skills. Ability to work collaboratively in a team and independently as required. Project management experience is an advantage. Mainstream WMS/WES/WCS integration experience is a plus but not required Chinese/Mandarin proficiency is a plus but not required. Willingness to travel to client or project sites as needed. GeekPlus is an Equal Opportunity-Affirmative Action Employer for Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation

Job Description Construction Project Manager - Construction - Base Salary to 120k/year - Atlanta, GA • Our client was founded by a team of professionals with diverse backgrounds in investment and development. The company was built to address a gap in the market - creating a platform where investors could align their interests and pursue long-term opportunities. Since its inception, the team has remained focused on creating value and making a lasting impact through strategic, growth-oriented initiatives., • Develop comprehensive project plans, timelines, and budgets for hotel construction projects., • Coordinate with architects, engineers, designers, and contractors to ensure alignment with brand standards and project goals., • Manage all phases of hotel construction, including site preparation, permitting, procurement, and build-out., • Monitor construction progress, quality control, and compliance with safety regulations and building codes., • Serve as the primary liaison between ownership, development teams, hotel operators, and external vendors., • Provide regular updates on project status, risks, and milestones to senior leadership., • Oversee project budgets, track expenditures, and implement cost-saving strategies without compromising quality., • Review and approve invoices, change orders, and contractor payments., • Identify potential risks and develop mitigation strategies., • Resolve construction and design challenges swiftly and effectively., • Ensure hotel design and construction align with brand identity, guest experience goals, and operational efficiency., • Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related field., • 5+years of experience in project management with a focus on hotel or hospitality construction., • Strong understanding of hotel development cycles, permitting processes, and hospitality design standards., • Proficiency in project management software (e.g., MS Project, Procore, AutoCAD)., • Base salary up to 120k/year, • Benefits #INDVIS #zr

Job Description GeoSearch is actively seeking a Survey Director to join our client's team in Northeast Atlanta, GA. Responsibilities include: Leadership and Direction • Receive broad guidance from senior-level management relating to overall key objectives, critical issues, new concepts, and policy matters and general parameters for execution. Manage people and processes to ensure effective execution. Review work produced by staff for quality assurance., • Provide oversight and direction of department or business unit including strategy, budgeting, staff, and deliverables. At the Operational and Company Level • Assist with the marketing of the firm’s capabilities to establish new clients and enhance relationships with existing clients., • Coordinate with other internal departments to meet project requirements., • Serve as technical advisor by providing senior level input and evaluation on projects. Do the Work • Meet with prospective clients, prepare proposals, and establish budgets and schedules., • Maintain close liaison with clients to resolve all project questions, such as, but not limited to, technical requirements, completion requirements and billing inquiries., • Oversee all surveying activities, including review of all project changes, pending or anticipated alterations to the contract, additional work requests, and all other factors, which may significantly affect staffing requirements or budget., • Supervise work of all survey project personnel to ensure it meets the highest professional standards., • Coordinate with other internal departments to meet project requirements., • Define the scope of multiple, complex projects and develop plan to accomplish land survey projects. Monitor progress toward deliverable schedules., • Compile project status reports., • Review job cost sheets/prepare monthly billings. Ensure assigned projects stay within budget allocation., • Collect outstanding monies due from assigned clients., • Participate in and formulate marketing presentations and attend marketing meetings., • Secure repeat business from existing clients and identifying new clients., • Supervise the work of Project Managers when needed. Qualifications: • Bachelor's degree in Land Surveying or related field preferred., • Professional Land Surveying registration., • Ten or more (10+) years of land surveying or related land development experience to include a minimum of two (2) years project management experience., • Knowledge of AutoCAD, Civil 3D, and Carlson principles., • Must be licensed surveyor in relevant state., • Experience managing a Survey Department is preferred., • Strong Survey Business Acumen - Prepare Proposals, RFP responses, Desire to pursue Business Development - Survey Accounting - Includes billing, project reports and collections., • Strong Local Jurisdictional Knowledge for Plat preparation and approval. Benefits: • Medical, dental, vision, life, and disability insurance, • 401(k) retirement savings plan with company match, • Paid time off, sick leave, and paid holidays, • Tuition reimbursement and professional development support, • Discretionary bonuses and other performance-based incentives, • Employee Assistance Program (EAP), wellness initiatives, and employee discounts

Job DescriptionThe Electrical Engineer ideal candidate has significant experience and background in Electrical Engineering / design capable of executing the core responsibilities listed below. Responsibilities: • Support medium scope projects through the detail design and implementation phase. This includes development of BOM generation, electrical control panel phasing plans, Electrical Engineering work plans, and design approval packages, • Supporting Project Engineer during transition from Detailed Design to Final Engineering, • Reviewing and providing Electrical Engineering input to Description of Operation (DOO) & Functional Specification (FSD) documentation, • Providing Electrical Engineering input for implementation plan, • Developing Electrical Engineering work plan to ensure successful project milestone achievements, • Leading Controls Layout review meetings with internal teams and Client. Supporting Project Engineer to achieve design acceptance, • Electrical device layout package, • Control panel fabrication package, • Electrical installation package, • Attending Client meetings as required, • 4-year engineering degree in Electrical Engineering (or similar engineering program) from an accredited college plus 3-5 years of relevant work experience, • Conveyor control process experience (photoeyes, solenoids, variable frequency drive, line scanner, print and apply application), • Advanced collaboration and communication skills (written and verbal communication), • Experience managing Engineering projects requiring collaboration between multiple Engineering work streams, • UL, NEC, NFPA, OSHA design requirements, • 480VAC motor control panel design experience, • Strong comprehension of Profibus, Profinet, Ethernet IP, network design and requirements

Job Description Major established and international company has an opportunity in a large plant environment commutable to the east of the Atlanta metropolitan area for a Production Engineer level 2. There are major company benefits, an attractive 401K with matching (100% to 6%) as well as 2-5% bonus potential. There is also the potential of relocation assistance. ESSENTIAL FUNCTIONS: • Performs research, design and development of manufacturing processes including production flow, assembly methods and production equipment., • Prepares and maintains detailed layouts of buildings and equipment., • Coordinates the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results., • Create manning plans based on volume forecasts for new programs., • Gives input to product design based on design for manufacture/design for assembly philosophy., • Designs, develops and tests and/or sources and cost-justifies various tools, machinery and equipment for recommended manufacturing methods., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency., • Develop and document quality system for new programs (control plan, PFMEA, process flow, work instructions, and inspection plans.), • Coordinate and document all Advanced Product Quality Planning (APQP) activities., • Calculate required dunnage usage. Design, test and order all necessary dunnage for new programs., • Develop and maintain documentation such as downtime, scrap, and efficiencies., • Utilize data such as downtime, scrap, efficiencies, etc. to plan and strategize countermeasures for equipment and process problems., • Bachelor's degree in engineering or related field with Three (3) to five (5) years Engineering experience. Experience in automotive manufacturing industry is preferred. Might consider under 3 years of experience at a lesser salary as a Production Engineer level 1, • Must have CNC machining experience and prefer plastic injection mold as well as prefer automated high volume assembly experience., • Technical skills in manufacturing processes and methods including flow, layout, assembly and production equipment., • Problem analysis and problem resolution., • Familiarity with current automotive standard and OSHA regulations., • Excellent verbal and written communication skills., • Excellent organizational skills., • Ability to motivate team efforts to accomplish goals. None. PHYSICAL DEMANDS: Required to sit or stand and move about the facility. Occasional lifting of items not to exceed 50 lbs. WORK ENVIRONMENT: Combination of office and plant environment. May be required to use safety glasses and wear steel toe shoes while performing specific tasks or while in specific manufacturing areas. PREFERRED SKILLSETS: (Machining PE) – note though that the machining experience is required versus preferred • 2D/3D CAD (Solidworks, AutoCad), • GD&T Knowledge and understanding, • CNC Experience, able to read and understand G-code, • Experience in Automotive Mfg., Understanding of IATF 16949 & ISO14001 standards., • Experience with Automation, Sensors, Vision systems, PLCs, 2D barcodes, • Can use hand measurement tools: Caliper, Micrometer, etc., • Project Mgmt, Experience with Capital Expenditures, Vendor Mgmt, • Understanding of and able to perform: process capabilities(Cpk), process flow analysis, gauge R&R, time studies., • Fixture design, • Tooling Selection and Design (applicable to Lathes, Mills, Grinders, Deburring machines)Company DescriptionAt Richard and Associates HR, we take genuine pleasure in helping others find the job that works best for them. With more than 15 years of talent acquisition experience serving clients worldwide, we know how to treat you right.At Richard and Associates HR, we take genuine pleasure in helping others find the job that works best for them. With more than 15 years of talent acquisition experience serving clients worldwide, we know how to treat you right.

Job Description Security Project Manager The Security Project Manager will be responsible for overseeing the coordination, implementation, and completion of Access Control/Video Surveillance/Intrusion Projects to the highest quality standards and client satisfaction. Strong initiative and a sense of ownership will be required to ensure that your projects are completed on time and on budget. The Security Project Manager will oversee all technicians and materials assigned to their project including task assignments, technician training, and quality control. This person must always possess the ability to interact with Co-Workers, Customers, and End Users in a professional and courteous manner. Responsibilities • Acts as single point of responsibility and accountability for their projects., • Coordinate with Sales and Engineering team for initial project turnover including review of all project documents, drawings, scope of work, and construction schedule., • Create and manage project timelines and schedules for each project to ensure completion within budget and to customer satisfaction., • Facilitate internal kick-off meeting with Project Foreman and Lead Technicians, • Create material purchase orders and monitor equipment shipments., • Oversee in-house system staging and equipment testing before shipping equipment to site., • Monitor and update daily task list to keep customer and management updated on project progress., • Facilitate Sub-Contract labor when applicable, • Regularly inspect quality of work performed by Internal Technicians and subcontractors, • Ensure all systems are installed per original design and operate as intended., • Coordinate the development and delivery of documentation including submittals equipment manuals, training materials, and as-built drawings, programming files, test results, and close-out documentation, • Coordinate and/or provide Client Training, • Out of State travel to various job sites required, • Minimum of 3 years of experience as a Security Project Manager in a commercial construction setting, • Ability to supervise multiple teams of Technicians and Sub-contractors when required, • Ability to multi-task and effectively manage multiple projects in the same time frame, • Strong written and verbal communication skills, • Ability to read architectural prints, low voltage wiring diagrams, project schedules and other technical construction documents, • Proficient in Microsoft Office (Excel, Word, Microsoft Project, Outlook), • Understanding of project financials including revenue, budget, profit margins, • Working knowledge of CAD software (Autocad, Bluebeam, Visio), • Excellent time management and organizational skills, • Certification strongly preferred, • Industry certifications strongly preferred, • Must have the ability to pass a background check Benefits: • Health Insurance, • Dental Insurance, • Vision Insurance, • Paid Time OffCompany DescriptionClarity ITS, LLC is dedicated to provide commercial clients a dedicated turnkey solution for their business technology needs. Our related services include network infrastructure, security and surveillance, audio visual systems, power and electrical wiring, and systems maintenance.Clarity ITS, LLC is dedicated to provide commercial clients a dedicated turnkey solution for their business technology needs. Our related services include network infrastructure, security and surveillance, audio visual systems, power and electrical wiring, and systems maintenance.

Job Description Responsibilities: The Estimator must have a minimum 5 years direct experience in commercial concrete construction. BS in Building Construction or equivalent preferred. Vertical, podium, tilt-up and post-tension experience is desired. Must have ability to execute and schedule several projects simultaneously while performing detailed shop drawings. Must possess skills to maintain quality control throughout the project. Must be an exceptional communicator and have positive energy. Building and maintaining client relationships is an essential part of this position. You will take off quantities and digitize drawings using On Screen Takeoff and input those quantities into the pricing spreadsheet. Individual will also be held responsible for: * • Meet with the operations team for a preliminary form work, budget, and logistics plan, etc., • Communicate with the client throughout the process to ensure our plan is also acceptable., • Develop a critical path schedule and discuss the logic behind the sequence., • Meet with form work suppliers to discuss their ideas for a more efficient cycle., • Discuss rebar, and post tension quantities and variances with subcontractors., • Analyze proposals and scopes of work from clients and subcontractors., • Lead the internal estimate review meeting., • Prepare client presentation materials. (Pour plan, form work plan, 3-D models etc....), • Price and reconcile drawing changes from drawing set to drawing set., • Ask questions and brainstorm for the best way to build a complex structure., • Solicit input from others, and share “lessons learned” with the team., • Attend post bid interviews as needed., • Walk the job on occasion to receive feedback for future estimates. This position reports directly to the VP level. Minimum Requirements: * • Minimum of 5 years direct experience in commercial concrete construction., • BS in Building Construction or equivalent., • Detail oriented in a fast paced environment., • You have the ability to communicate effectively with personnel at all organizational levels as well as with customers and vendors., • Highly organized., • Comfortable in handling large files and confidential data., • Excellent verbal and written communication and interpersonal skills., • Proficient with Microsoft Office Suite (Word, Excel, and Outlook)., • You have the ability to visualize 2-D drawings in 3-D and explain your means and methods in simple terms., • Driven to learn more about the technical aspect of concrete construction. Candidates who possess the following skills, experience, and capabilities may receive greater consideration during the evaluation process: * • OSHA Certification, • Document Control Experience

Job Description Senior Geotechnical Engineer Requisition Number: 2025-1800-19A S&ME is looking for a motivated and passionate Senior Geotechnical Engineer to join our Service Line team in Duluth, Georgia. Are you ready to contribute your education and knowledge to meaningful projects? Join us at S&ME! As a Senior Geotechnical Engineer, you will be responsible for overseeing projects from planning through delivery, fostering innovation while maintaining the highest standards of safety, quality, and schedule adherence. Your advanced knowledge in geotechnical evaluation, design, and implementation will be essential in addressing complex engineering problems. In addition, you'll cultivate strong client partnerships to support both project outcomes and business growth. By guiding junior staff and coordinating each stage of the workflow, you'll help enhance efficiency, optimize practices, and elevate the overall performance of the team. Your Day-to-Day: • Geotechnical Proficiency: Utilize advanced engineering methods to evaluate foundation systems, slope stability, and settlement behavior, offering ground improvement solutions as needed., • Collaboration & Mentorship: Maintain consistent communication with clients and subcontractors to keep projects on track, provide guidance to junior engineers, and support S&ME's growth initiatives., • Documentation & Proposals: Develop thorough technical reports, craft detailed project proposals, and engage in marketing and client development activities., • Team Leadership: Set the standard by promoting organizational policies and practices, with a strong focus on safety, risk control, project execution, and quality assurance. What You Bring: • A Bachelor's degree in Civil or Geotechnical Engineering, Mining, or a related engineering field, • A minimum of 10 years of project management experience in the A/E/C industry, • A Professional Engineer (PE) license or the ability to obtain, • A strong proficiency in computer skills, including at minimum Microsoft Excel, Word, PowerPoint, and AutoCAD Working Conditions and Physical Demands: • You are willing and able to perform the physical demands of this position with the use of Company-provided Personal Protective Equipment such as:, • Working outdoors the majority of the time in varying weather conditions, • Walking over rough, uneven terrain and standing for potentially up to 12 hours a day, • Routinely lifting and carrying 40-50lbs, (field/laboratory samples and equipment), • Maneuvering field equipment safely, such as a loaded wheelbarrow, on uneven ground around active construction sites We Are S&ME: At S&ME, we've spent over 50 years providing innovative solutions in geotechnical, civil, environmental, and construction materials disciplines. Our team of 1,000+ employee-owners spans over 10 states, working together to deliver impactful results for our clients. We foster a culture of collaboration, honesty, and dedication, with a focus on making positive contributions to the communities we serve. As employee owners, we're invested in each other's success and prioritize creating an environment where everyone can thrive, both professionally and personally. What We Offer: We offer a comprehensive benefits package with a full suite of options, including well-being programs to support you and your family, as well as the development resources you need to advance in your career. We also believe in a flexible working environment, allowing you and your manager to determine how you can work most effectively and collaboratively to meet your client, team, and personal commitments. • Competitive Compensation, • Medical, Dental & Vision Plans with HSA and FSA options, • 100% Employee Stock Ownership Plan (ESOP), • 401K with Company Matching, • PTO with Rollover, • Maternity/Paternity Leave, • Employee Recognition Program, • Credential Incentive Program, • Tuition Reimbursement, • Company Vehicle with Fuel Card for Project-Based Work, • $2,000 Referral Bonuses & More! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job DescriptionEDUCATION • Bachelor’s degree in Electrical, Mechanical, or Civil Engineering with minimum 4 years relevant industry experience -OR-, • Bachelor's Degree in Engineering Technology with minimum 4 years relevant industry experience -OR-, • Associate Degree with minimum 8 years relevant industry experience -OR-, • High school diploma with minimum 15 years relevant industry experience EXPERIENCE, • Strong understanding of electrical substation equipment is preferred., • Experience in Transmission and/or Distribution Substation Operations for an electric power utility company is preferred., • Good understanding of utility electric grid operations is preferred., • Knowledge of basic electrical power system theory is preferred., • Strong understanding of the Institute of Electrical and Electronics Engineers Standards, National Electric Safety Code, National Electric Code, and OSHA safe operating practices is preferred., • Ability to create electrical Substation Physical drawings from a single line diagram is preferred., • Ability to create/manipulate 2D drawings and 3D models for electrical Substations., • AutoCAD training, experience, or certification is preferred., • Experience using 3D modeling software (Autodesk Inventor or Autodesk Map 3D [P4A]) is preferred., • Experience working with document management & estimating systems such as Transmission Estimating and Management System (TEAMS), STOMP, MAXIMO, SCST Vault, Autodesk Vault Professional 2023 is preferred., • Experience using Primavera (P6), progress reporting software preferred., • Proficiency using Microsoft Office products is required. KNOWLEDGE, SKILLS AND ABILITIES, • Must demonstrate excellent communication skills (oral & written) and the ability to communicate technical issues simply., • Must be a self-starter and exhibit strong problem-solving skills., • Must work well in a team environment and have the ability to develop and build relationships at all levels., • Must possess effective time management and organizational skills sufficient to manage multiple projects with various priorities and competing deadlines., • Must demonstrate a customer focus with a willingness to meet the needs of our customers and solicit feedback., • Must have the ability to be an effective mentor to others and teach job-related skills., • Must accurately enter weekly time and process business expense receipts promptly., • Must be able to envision equipment/materials and how they connect spatially inside three dimensional space. BEHAVIORAL ATTRIBUTES, • Model Our Values: Safety First, Unquestionable Trust, Superior Performance, and Total Commitment., • Conduct all activities with a focus on providing value to our customers., • Take personal responsibility for their projects and customer issues., • Follow through on all aspects of assignments to ensure a quality product and increased value is delivered to our customers., • Exhibit and promote a positive, "can do" attitude., • Commitment as a team member to building and maintaining an Inclusive work environment., • Must place strong emphasis on Operational Excellence (mistake free designs).

Job DescriptionCompany Description The Vertex Companies, LLC (VERTEX) is a global $150M professional services firm that offers integrated forensic consulting, expert witness services, construction project advisory, and compliance and regulatory consulting to a myriad of markets and industries. Our brand purpose is to better outcomes for our clients, colleagues, and communities. Join us if you are looking for a career that offers you a chance to love what you do, continuously learn, and take pride in your work. In August 2025, The VERTEX Companies, LLC (VERTEX) acquired ADAMS Management Services Corporation (ADAMS), a nationally recognized leader in healthcare program and project management. For nearly 40 years, ADAMS has built its reputation on healthcare specialization, trusted client relationships, and a hands-on approach that gets results. By joining forces, we’ve created one of the most comprehensive healthcare consulting platforms in the industry. VERTEX brings the scale and depth of a global professional services firm — spanning forensics, construction project advisory, and regulatory consulting — while ADAMS adds unparalleled sector expertise. Together, we offer healthcare organizations a single, integrated partner to de-risk complex projects, ensure compliance and operational readiness, and deliver lasting value at every stage of the project lifecycle. Job Description The Healthcare BIM Planner will assist Project Managers and Senior staff with completion of engagements services. As part of our engagement services for ADAMS clients, they will manage and generate medical equipment placement drawings using REVIT. The Healthcare BIM Planner is responsible for delivery of these services, ensuring client satisfaction and making sure the drawings are complete and accurate. The BIM Planner has responsibility to ensure that assigned engagements and assigned tasks adhere to processes and policies as defined in the ADAMS Standards of Practice Manual. • Manage and generate medical equipment placement drawings using REVIT, • Build REVIT families for medical equipment and systems, while utilizing our proprietary planning software and referencing manufacturer specifications, • Ability to run medical equipment BIM kickoff and client meetings without the help of the BIM manager., • Incorporate and coordinate updates from review of equipment lists, manufacturer documents and redlined drawings, • Convert, upload and download files for distribution to internal team, design and construction teams and vendors, • Successfully, and professionally, interact with architects, engineers, equipment manufacturers, contractors as well as client users and administrators, • Ensures team members adhere to policies, procedures, and standards for project planning and management, • Ensures their teams projects maintain profitability within R&B guidelines., • Reviews business processes and recommends specific process improvements, including developing and maintaining best practice guidelinesQualifications Education • Expert knowledge of REVIT in a related field (knowledge of setting up models from scratch, able to build and update parametric families) and expert knowledge of medical equipment and layouts with an understanding of complex design and construction terminology., • Knowledge of Revit add-ons., • Demonstrates excellent computer skills including but not limited to Microsoft Office (especially Word, Teams, OneNote and Excel), as well as Bluebeam and AutoCAD., • Ability to manage projects with multiple stakeholders., • Ability to demonstrate independence, initiative and a proactive approach to daily tasking., • Excellent verbal and written communication skills, interpersonal skills, consultative skills and conflict resolutions abilities., • Excellent time management and organizational skills, • Must have current driver’s license and be insurable to travel by car, as position requires occasional travel. Additional Information All your information will be kept confidential according to EEO guidelines. VERTEX offers a solid total compensation package including base salary and discretionary bonus plan. We also offer a robust benefits package including, healthcare (with multiple plan options) and dental; Company-paid Life Insurance, Short Term Disability, and Long-Term Disability. We offer a 401k plan with immediate match and vesting, Flex Spending Account, Employee Assistance Program, and other perks. We provide a generous paid time off plan for eligible employees including 15 days of vacation, 64 hours of sick time, and 9.5 paid holidays (prorated for eligible part-time employees). Our “Lifetime of Learning” program also offers tuition reimbursement and additional support for pursuing advanced education, to help employees grow their skills and careers. VERTEX is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you require assistance to complete any part of the application process, please contact our Recruiting team at . NOTICE TO THIRD PARTY AGENCIES: Please note that VERTEX does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, VERTEX will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, VERTEX explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of VERTEX.

Job Description WHY HILLPOINTE? Hillpointe is a fully integrated real estate development and investment management firm focused on developing market-rate workforce housing across the Sun Belt. Ranked at the top of NMHC's list of Builders and Developers, our team ensures best-in-class execution. Built on its long and proven track record of real estate development, the firm's investment approach is centered around its in-house general contracting expertise, enabling direct control of cost and delivery timeframe. For each project, Hillpointe directly controls land acquisition, land development, construction, procurement of building materials, asset management, and capital markets. This is more than just a job - it's a career-defining opportunity! At Hillpointe, you'll be part of a dynamic, innovative team that has tangible impacts on day-to-day operations and contributes directly to overall success. Design Engineer (EIT) The Design Engineer is responsible for the design and production of construction plans, technical calculations, reports, and permit documentation for Hillpointe's multi-family development projects that occur in Georgia, Florida, and the Southeast. The role involves: • Coordinating with multiple stakeholders, • Performing hydrologic analyses, • Contributing to the continuous improvement of the engineering team, • Bachelor's Degree in Civil Engineering or a related field, • Three years of proven work experience, • Proficiency in AutoCAD Civil 3D, Hydraflow (or equivalent), Microsoft Office, Bluebeam, • Strong communication, analytical, and problem-solving skills are essential, • A willingness to learn and work independently., • Current EIT, or ability to obtain within 1 year of employment NOTE: This document outlines the general nature and level of work expected from individuals in this role. It's important to understand that this is not an exhaustive list of responsibilities, duties, and skills. Additional tasks or job functions that can be safely performed may be required as necessary by supervisory personnel. This flexibility in additional duties showcases the company's adaptability and encourages employees to be versatile. The employee is expected to adhere to all work rules, procedures, and policies established by the company, including, but not limited to, those contained in the employee handbook.

Job Description Are you ready to take the lead in shaping safer, smarter streets? The City of Sandy Springs is seeking a Senior Traffic Engineer to organize and direct our multimodal traffic engineering program. In this role, you’ll be at the forefront of making our transportation systems efficient, safe, and forward-looking — from managing congestion and bottlenecks to driving our long-term goal of zero fatal and serious injury crashes by 2040. What You’ll Do: • Oversee the City’s multimodal traffic engineering program, including safety and operational analyses., • Manage roadway safety studies, intersection improvements, and traffic calming initiatives., • Review and approve traffic engineering studies, control devices, temporary traffic control plans, and special permits., • Develop and implement solutions to reduce congestion and enhance safety for drivers, cyclists, and pedestrians alike., • Collaborate with City leadership, departments, and the community to ensure responsive, data-driven transportation solutions., • Bachelor’s Degree in Civil Engineering with specialization in transportation/traffic (Master’s preferred)., • Seven (7) years of experience in traffic or transportation engineering (Master’s degree may substitute for two years)., • Georgia Professional Engineer (PE) license required; PTOE and RSP certifications preferred., • Strong background in traffic software (Synchro, VISSIM, AutoCAD, ArcGIS, etc.) and project management., • Proven ability to lead programs, manage projects, and communicate technical concepts clearly to diverse audiences. • Two competitive medical plan options for you and your family, along with dental and vision coverage, • 10 paid holidays per year, plus 1 floating holiday, • Accrued paid vacation and sick leave, • City-paid life and AD&D insurance, short-term disability, and long-term disability, • A City-paid Employee Assistance Program (EAP), • A robust retirement savings program: the City contributes 12% of your base salary to a 401(a) plan and matches up to 5% of your contributions to a 457(b) plan, • Tuition reimbursement up to $5,250 per year after one year of service toward a relevant degree, • Access to an on-site gym About Sandy Springs: Sandy Springs is Georgia’s sixth-largest city, with nearly 110,000 residents and a thriving business community. Known for its small-town charm, strong public safety, and exceptional quality of life, Sandy Springs consistently ranks among the best places to raise a family. As Georgia’s most diverse city, it offers top-rated schools, world-class healthcare, miles of parks and riverfront recreation, and a vibrant dining and retail scene—all just minutes from the heart of metro Atlanta. Additional Information: • Normal work schedule is Monday through Friday, 8:00 a.m. to 5:00 p.m., • Rotational after-hours on-call support and emergency operations support required, including holidays and special events.

Job DescriptionThe Electrical Engineer will analyze existing electrical systems and making cost-effective improvements, generating electrical BOMs, creating wiring schematics, completing quality assurance, inspecting the equipment, as well as running diagnostics, and ensure projects are completed on time and to specifications. You will be in place to assist and develop equipment through the implementation of emerging technologies and best in class controls design practices for high-speed automated packaging equipment. DUTIES / RESPONSIBILITIESØ Demonstrate strong leadership abilities and organizational skills. Candidates should be passionate about engineering and able to efficiently troubleshoot systems.Ø Developing, reviewing, updating, and modifying PLC, Motion and HMI CodeØ Generating and Maintaining BOMsØ Developing, reviewing, updating, and modifying safety systems to ensure standards are met.Ø Design Electrical schematics and Panel layouts to meet NEC / NFPA 70, UL508 standards.Ø Program using IEC standards LD, IL, SFC, ST.Ø Research new components to keep current with new technologies.Ø Developing, reviewing, updating, modifying, and approving electrical schematics.Ø Liaising with project managers, manufacturing, and other engineers to ensure projects are completed to specifications.Ø Establishing relationships with customer facing organizations, vendors, suppliers, other professionals, and expanding networks.Ø Resolving supply chain issues by finding alternate parts when preferred components aren’t available.Ø Analyzing existing processes and scheduling meetings to discuss improvement initiatives.Ø Conducting research, performing diagnostics, and troubleshooting equipmentØ Drive development projects by directing and influencing cross functional teams.Ø Machine Production and Installation Support:· Support the Technical Sales managers on platform production projects.· Respond to questions, troubleshoot, provide studies and estimates.· Provide cost effective solutions to problems affecting the customer product while maintaining the integrity of the designs.· Support field service in commissioning machines.· Work with customers to integrate the machine into projects.· Give guidance to assembly teams during manufacturing process. REQUIREMENTS / QUALIFICATIONSv BS Degree in Electrical Engineering from an accredited Universityv 2 years of experience in electrical/controls/programming – Required.v Packaging Machinery experience - Preferredv Excellent problem-solving and analytical abilities.v Practical experience with Electrical CAD software.v Strong interpersonal, negotiation, and communication skills.v Excellent motivational skills and multitasking abilities.v Ability to travel both Domestic and Internationalv Provide standard machinery controls design for solving our customer's packaging needs.v Responsible for accuracy of calculations in reference to electrical and pneumatics required for designing automation mechanisms and equipment.v Research purchased electrical components for adequate sizing and selection of various electrical devices.v By using AutoCAD 2D develop working electrical layout drawings, control cabinet drawings, and pneumatic layout drawings for production and customer usage in component identification.v Assist in cost reduction and quality improvement of the electrical designs for our machinery.v Understand customer's electrical specifications and needs for their packaging operations.v Assist technical writer in creation of machine documentation.v Provide programming for standard equipment upgrades, and all custom packaging machinery.v Participate in start-up and commissioning of machinery in plants and occasionally at customer’s facility. E04JI800n8pv406ln5h

Job Description Pay: $125,000.00 - $160,000.00 per year Local & established firm in the NE Florida area is looking for qualified professional(s) to work as a project surveyor. Candidates must be knowledgeable and have experience in various surveying tasks. Tasks will include but not limited to, boundary, topographical, ALTA, residential/commercial, legal sketches & descriptions, as-built/record, bathymetric, and other various types of surveys. Candidates will oversee & manage various surveying tasks to meet project requirements and/or specifications. Candidates must have good organization and communication skills. They also must have a valid diver's license & credible references ***Benefits & additional sign on bonus of $10,000.00 available to the right candidate! Requirements need to include: • Georgia License in Surveying & Mapping is required. Florida & Georgia license id preferred, • 2 years experience Post Licensure, • Successful history of managing projects, • Knowledge of AutoCAD Civil 3d, • Extensive technical knowledge (GPS, Data Collection, and CAD mapping), • Excellent written and verbal communication skills, • Experience with Various Survey Tasks, i.e. Planning/Land Development, Residential & Commercial Construction, ALTA, As-built, Boundary, Bathymetric/Hydrographic, Civil Construction, Environmental, and Topographic Surveys. Why Join our team: Established Surveying firm In Northeast Florida for 25+ years & Growing! Good Benefits Paid Time Off Room For Growth Team Atmosphere Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance

Job Description Job Description: Hazen and Sawyer has an excellent opportunity for an experienced CAD/BIM Designer to join our Atlanta, GA office to work with project managers and our process mechanical engineers to produce BIM (Revit) models, families, and contract drawings. This position will also lead the effort of coordinating the development of contract drawings with multiple disciplines, including the coordination of interdisciplinary interactions and the resolution of conflicts as well as the coordination of project deadlines and standards adherence across project deliverables. Job Responsibilities include, but are not limited to the following: • Developing Revit models, families, and contract documents, • Developing base files and contract drawings, • Coordinating contract drawing development with multiple disciplines, • Performing BIM model clash detection and working with various disciplines to resolve conflicts, • Training/mentoring less experienced Designers, • Providing input on CAD/BIM standards and workflows Minimum Professional Qualifications: • Proficient in the use of Autodesk Revit with experience in the creation of models, families, and contract drawings., • Experience leading the model and contract drawing development effort for projects, including performing interdisciplinary clash detection and the reconciliation of conflicts as well as ensuring that standards are adhered to., • Relevant bachelor’s degree and 4 years of experience — or an associate degree/technical certification and 7 years of experience., • Proficiency in Autodesk Revit Preferred Professional qualifications: • Experience leading and coordinating drawing production for small to medium sized projects, • Experience directing and mentoring less experienced designers, • Proficiency in AutoCAD/Civil 3D

Job Description Our client, a growing general contractor, is seeking a talented Aviation Construction Superintendent/Project Manager to join their team. As the Senior Construction Manager, you will be responsible for the overall project performance, including costs, schedule, quality, and project status. You will collaborate with clients, design teams, general contractors, airport management, airport officials, and key stakeholders to ensure successful project delivery. To excel in this role, you must possess strong oral communication skills and can understand and follow oral and written communication. Demonstrated leadership ability in managing staff and project efforts and a progressive and innovative attitude toward construction technologies are essential. Proficiency in Microsoft Office Suite, MS Project, SharePoint, AutoCAD, Primavera P6, Adobe Acrobat, Bluebeam, Procore, etc.. Requirements: • Bachelor's degree in Project Management, Architecture, Engineering, Construction Management, or equivalent real-world experience, • Minimum of ten (10) years of proven experience as a Senior Construction Project Manager on commercial construction projects, preferably aviation, valued at $50 million or more, • Valid Driver's License and ability to obtain Airport Security Badging Credentials, • Basic knowledge of reading and interpreting construction documents, construction plans, and specifications, • Ability to understand and interpret construction and master schedules, • Aptitude for construction estimating (conceptual and detailed estimating tasks), • Ability to work with minimal supervision, • Proficiency in computer software applications utilized to administer terms of the contract through project controls Responsibilities: • Develop and maintain excellent relationships with clients, architects, consultants, subcontractors, and other key stakeholders, • Provide overall accountability for the planning, design, permitting, construction, financial controls, and closeout/turnover of construction programs/projects, • Support the delivery of client programs/projects on time, within budget, and to a mutually agreed-upon level of quality, • Track progress of projects against goals, objectives, approved budgets, and timelines, • Implement change management strategies to assess change requests and make recommendations, • Liaise with governing authorities and regulatory agencies, • Understand and enforce contractual responsibilities and assist with dispute resolution, • This is a 3rd shift role The Offer: Our client values diversity and promotes a collaborative work environment. They offer competitive compensation and benefits packages. To apply here for this position, please submit your resume and project list to

Job Description Sr. Production Engineer (Mechanical) POSITION DESCRIPTION: Major and established international company has an opportunity for a Sr. Production Engineer at their large and high volume manufacturing site commutable to the east of the Atlanta metropolitan area. Will recommends and implement improvements to existing production processes, methods, and controls. Will develop and implement optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. Will coordinate the manufacturing launch for new or revised products. There are major company benefits, an attractive matching 401K, and bonus potential that can be in 2-5% annual range. ESSENTIAL FUNCTIONS: • Finds problems, plans, and implements improvements for existing product and manufacturing process issues., • Develop and maintain document quality system for new and existing programs (PFMEA, control plan, process flow, work instructions, and inspection documents)., • Performs research, development, evaluation, installation, operation and maintenance of manufacturing systems, processes, and equipment to meet requirements., • Coordinates the manufacturing launch of new/revised products including establishing goals, training team members, and evaluating results., • Gives input to product design based on design for manufacture/design for assembly philosophy., • Performs cost-benefit analysis for product and/or manufacturing process cost reduction, quality improvement, and improved efficiency., • Leads or participates in Kaizen activities to ensure continuous improvement in manufacturing processes, products, components, raw materials, and equipment., • Prepares and maintains detailed layouts of building floor space, equipment, and tooling., • Performs routine activities accurately and promptly per instructions and procedures., • Train Production and Maintenance Associates to improve technical knowledge and troubleshooting skills on the production shop floor. Bachelor's degree in Engineering or related field with at least 5 years of engineering experience. Experience in automotive manufacturing industry is preferred. • Must be able to read, interpret, and create blueprints and technical documents., • Must be proficient with 3D CAD software, preferably SolidWorks, and 2D CAD software, preferably AutoCAD., • Must have at least 3 years of hands on experience with high volume CNC Machining, automated assembly, and/or plastic injection molding processes., • Excellent troubleshooting skills. Exhibits ingenuity/creativity regarding problem solving and countermeasure implementation., • Experience calculating and analyzing OEE, scrap, and manufacturing capacity., • Experience with capital equipment projects and new product launches while meeting APQP and ISO 9001 and/or TS 16949 standards., • Excellent verbal and written communication skills., • Excellent organizational skills, able to motivate team efforts to accomplish goals., • Able to quickly learn basic knowledge of the company, products, manufacturing processes, and rules., • Must be proficient in MS Word, Excel, and PowerPoint.

Job Description H&H is offering an exciting opportunity for a Hydraulics and Hydrology Engineer to join our Atlanta team. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Apply engineering principles to independently execute and coordinate design projects, • Lead hydrologic and hydraulic analysis of drainage systems and bridge/culvert studies, • Track effort and manage resources, • Coordinate design elements with project partners and team members, • Provide professional mentoring to EITs and Designers, • Lead the drainage design to supporting schematic designs and PS&E, • Contribute to proposal management (SOQ’s and RFPs), • Oversee engineering phases within major/ moderate-sized projects, • Conduct and oversee hydrologic and hydraulic design calculations for stormwater management and bridge hydraulic studies, • Coordinate environmental compliance efforts with design teams and permit applications, • Assist with planning, scheduling, and coordinating design tasks across disciplines, • Prepare and review technical documents, including plans, specifications and estimates, • BS in Civil Engineering and more than four years’ experience in Hydraulics and Hydrology with a concentration on GDOT, • Licensed Georgia PE; eligibility for comity through other jurisdictions also acceptable, • Proficient in analyzing field survey data, maps, drawings and topographical information for project design, • Ability to validate design computations, • Knowledge and judgment to develop construction cost estimates, • Skilled in validating design computations and developing construction cost estimates, • Effective in client meetings and internal team coordination to ensure project deadlines and quality standards, • Familiar with FHWA, USACE, and AASHTO design guidance and Soil Erosion Standards, • Experience with software such as HEC-RAS, HY-8, SRH-2D, HydroCAD, Storm and Sanitary Analysis, MicroStation (including InRoads or OpenRoads), AutoCAD Civil 3D, GIS software (preferred), • Project background with hydrologic/ hydraulic analysis, floodplain studies, hydraulic modeling, bridge scour, and environmental permitting, • Detail-oriented, self-starting team player adept at managing multiple projects We offer a professional work environment, competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS

Job Description Looking to grow your career at a 100% employee-owned firm? Join Wiley|Wilson, an architecture and engineering (AE) firm where over 180 employee-owners across five locations serve our valued clients. We are currently in search of a Mechanical Project Engineer to join our Atlanta, GA team. In this pivotal role, you will lead the mechanical design on various projects, collaborating closely with our mechanical design staff throughout the firm. As the mechanical technical lead, you will spearhead the design of complex projects and collaborate with Project Managers, Senior Engineers, and other Project Engineers to conceptualize designs and execute detailed design documents. Mentoring junior staff and contributing to business development efforts are also key aspects of this position. With our strong track record in building system HVAC and plumbing systems, as well as steam, hot water, and central utility systems, Wiley|Wilson offers an exceptional platform for your expertise in MEP design. If you possess the requisite experience and a strong background in MEP design, this may be the challenge that you've been looking for. Apply today! What we offer: We offer a competitive salary along with employee ownership through our ESOP program. Our generous benefits package includes multiple group health insurance options, a 401k with up to 6% matching contribution, 24 days of paid time off (PTO), five paid holidays per year, tuition reimbursement, and many other perks. We prioritize work-life balance with benefits such as 80 hours of parental leave for the birth of a child or newly adopted child, a hybrid work schedule, and accommodations for individuals with disabilities. Requirements: We are seeking a candidate with 6-10 years of experience in mechanical engineering and a bachelor's degree in mechanical engineering from an ABET-accredited institution. The candidate must be a registered Professional Engineer in Georgia or be able to obtain registration through reciprocity within three months of their start date. Experience using AutoCAD and/or Revit is required, along with field knowledge of mechanical systems and familiarity with Trane Trace 700 analysis software. Knowledge and application of sustainable design practices are also important. Candidates must be eligible to work in the United States and must be eligible to obtain a security clearance. Desirable: • Commissioning expertise, • Federal Government design experience Wiley|Wilson is a full-service architecture-engineering firm, specializing in creating innovative and functional design solutions for our government, institutional, and private-sector clients around the world. Our diverse mix of projects, generous benefits, and focus on professional growth provides a truly unique opportunity for you to elevate your career. As a 100-percent employee-owned company, our 180+ employees share a stake in our success through an Employee Stock Ownership Plan (ESOP). The ownership model, coupled with our focus on service and engagement, creates a distinct company culture. Wiley|Wilson has offices in Alexandria, Lynchburg, Richmond, VA; Raleigh, NC; and Atlanta, GA. Other: • EOE/AAP, Disability/Covered veteran, Drug Free Workplace, • AT560 Mechanical Project Engineer Job Posted by ApplicantPro