Cad engineer jobs in Bayonne, New JerseyCreate job alerts

MRCE is in search of Structural Engineers who are ready to kickstart their careers with a leading engineering consulting company in New York City, Philadelphia, Boston and Virginia. Our structural engineers are exposed to a wide range of geo-structural foundation challenges, providing opportunities to learn from experienced engineers and leadership and tackle technical challenges on complex engineering projects. At MRCE, we are dedicated to combining your academic training with engineering judgment to provide a solid engineering experience and develop strong technical skills. These experiences will give you a comprehensive understanding of high-tech design and realistic construction methods and requirements, ensuring your professional growth and success in the field. Job Responsibilities • Conduct site visits and available information research for new opportunities, • Perform pre and post-condition surveys of buildings and structures;, • Developing forces calculations due to lateral retaining systems, support of excavation and underpinning systems, deep foundations, waterfront structures., • Assist in designing temporary support structures and deep foundations (driven and drilled piles) in accordance with local building codes and applicable standards., • Assist in performing inspections for new foundation construction, including but not limited to deep and shallow foundations, subgrade preparation, support of excavation structures, underpinning systems, and pile load tests., • Prepare daily logs and communicate investigation or construction progress with the office., • Assist in preparing inspection logs and reports for construction approval and Code compliance., • Travel locally by public transportation, or with vehicle for equipment transport. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the functions. • Navigate job site/field environment as well as an office environment., • Remain either stationary for extended periods (for instance, in a chair or vehicle), or move often (for instance, walking through a job site), depending on project needs., • Lift and carry equipment (up to 50 lbs)., • Position self in a stooping, kneeling, or crouching manner and climb ladders and stairs for reading instruments., • Navigate uneven ground and footing conditions (for example, soil/gravel/ mud footing, riprap and slopes, rugged terrain)., • Work in varying weather conditions (for example, cold, hot, rain, snow)., • Wear gloves, use hands, handle or feel objects, tools, machinery and computers., • Communicate with others; exchange information accurately., • Operate a computer., • Operate specialized equipment and instruments. Education: Bachelor’s or Master’s degree in Geotechnical or Structural Engineering from an ABET/EAC accredited program; • 0-2 years of experience in a similar role;, • Numerical analysis and modeling is a plus, • Auto CAD, MicroStation, Revit experience is a plus, • Knowledge of L-Pile, Sap 2000, Risa, and other specialty software is a plus, • Engineer in Training or registered for FE examination;, • Readiness to spend time in the field for short or long-term projects;, • Excellent written and verbal communication skills;, • Capable of working independently and collaborating with team; MRCE is an equal opportunity employer and considers all applicants without regard to race, color, religion, national origin, ancestry, citizenship, gender, pregnancy, age, physical or mental disability, genetic information, service in the uniformed services, or any other basis protected by federal, state or local law. Base Salary Range: $65,000 - $80,000. Actual compensation may vary based on related work experience, market conditions, education/training, certifications and credentials. This position is eligible for straight-time overtime and participation in the firm's annual bonus and performance review program. Bonuses are discretionary and based on individual job performance and the profitability of the firm.

Job Description Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Lead Mechanical Engineering Team with conceptualization, planning, execution, quality control and closing processes of projects in the discipline., • Coordinates with other related disciplines and outside consultants., • Responsible for conceptualizing and the preparation of project specific Construction Documents (Drawings & Specifications) and providing construction administration Services / Field Engineering services., • Performs design and calculation tasks based on standard engineering techniques and procedures., • Applies standard practices, engineering fundamentals, and techniques in specific situations, adjusts and correlates data, and follows design through a series of related detailed steps or processes., • Responsible for overall management of the HVAC team of engineers and provide technical support as required., • Must be able to sign and seal all documents prepared by the department, • Assures compliance and provide input with established firm-wide policies and procedures as related to project execution., • Makes recommendations and decisions that impact a project., • Responsible for client satisfaction, technical excellence, establishment and adherence to project budgets, income and cost., • Coordinates and manages project activities., • Communicate / Coordinate with task team members involved in technical discipline’s activities on all projects., • Has contact with clients and professionals inside / outside the firm. Essential Skills and Experience: • Bachelor’s degree in Mechanical Engineering. Master's degree preferred., • New York State Professional Engineer License. NJ is also preferred., • 15+ years of experience as a Mechanical Engineer with at least five years managing 8-10 engineers and designers for major governmental and commercial projects with significant technical responsibilities., • Revit and CAD experience a plus., • Ability to work under pressure and meet tight deadlines., • Excellent oral, written skills and communication skills., • Teamwork and customer satisfaction oriented., • Comfortable working in a remote x hybrid work environment with geographically distributed team members.Company DescriptionJoin Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job Description Ensign Engineering, P.C. (EEPC) located in the Bronx, NY is a WBE/VOSB engineering & architectural design and construction management firm. Established in 1993, EEPC’s experience includes MEP engineering projects in schools, hospitals, Police Stations, restaurants, and airports. We are experts in delivering creative solutions in designs, system procurement, commissioning, project management and owner’s representation. Our portfolio is large and our reputation is unmatched working in NYC with various architects and agencies. Ensign is a great place to work featuring challenging technical assignments, competitive salaries and the opportunity for career growth. We are expanding our Electrical Engineering Practice and seeking an experienced (5-7 years) engineer familiar with current NYC Electrical and Fire Code, NYC Building and Energy Conservation Codes, and NFPA standards. Qualifications include Electrical Engineering degree, CAD capable and experience designing power and lighting, fire alarm and low voltage systems. The successful candidate will have excellent communication and technical writing skills, be self-motivated, experienced coordinating with HVAC, Plumbing, and Fire Protection engineers and designers. A NYS PE license is preferred. Company DescriptionENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning. ENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. ENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are: Regina Gallagher Marengo, P.E.\t\t\tPresident Civil Engineer Depending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. The goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following: • MEP Design and Construction Management, • Existing MEP Condition Surveys and Analysis, • Energy Audits per LL84 & LL87, • Electric service, distribution, power and lighting, • Fire detection, alarm, telecom, security, • Fire suppression, sprinkler and standpipe, • Civil and Site Engineering, • Water Supply and Distribution, • Storm Water Management, • Traffic Studies and Analysis, • CommissioningENSIGN ENGINEERING, P.C., is a leading Bronx based multi-discipline engineering firm, whose principals and associates provide consulting and design expertise in engineering and construction management. We are hands-on engineers, with principals intimately involved in each phase of a project from initial planning to final commissioning.\r\n\r\nENSIGN ENGINEERING, P.C established in 1993, is certified with the Federal Government as a Veteran Owned Small Business (VOSB) as well as a WBE/DBE by most New York State and City agencies including, New York City DDC, NYS DOT, NYC School Construction Authority and the Port Authority of New York & New Jersey. \r\n\r\nENSIGN ENGINEERING, P.C.'s mission is to provide first-rate civil, structural, mechanical, plumbing and electrical consulting engineering services on public, private, institutional, industrial and commercial projects. The company's principal officers are:\r\n\r\nRegina Gallagher Marengo, P.E.\t\t\tPresident\r\nCivil Engineer\r\n\r\n\tDepending upon the scope of a project, ENSIGN ENGINEERING, P.C. is readily able to retain and manage a team of highly experienced designers, engineers and inspectors. Our location in the New York metropolitan area gives us ready access to an extensive pool of experienced professionals. \r\n\r\n\tThe goal of ENSIGN ENGINEERING, P.C. is to deliver projects on time, within budget, properly designed, and in complete compliance with the Client's scope of project. Areas of engineering expertise include the following:\r\n\r\n- MEP Design and Construction Management \r\n- Existing MEP Condition Surveys and Analysis\r\n- Energy Audits per LL84 & LL87 \r\n- Electric service, distribution, power and lighting\r\n- Fire detection, alarm, telecom, security\r\n- Fire suppression, sprinkler and standpipe\r\n- Civil and Site Engineering\r\n- Water Supply and Distribution\r\n- Storm Water Management\r\n- Traffic Studies and Analysis\r\n- Commissioning

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Electrical Engineer (PE) with an opportunity to experience a varied array of projects which include large infrastructure, ground, underground, rail, and transit projects throughout the New York Area. This individual will function as a senior level Electrical Engineer on projects, responsible for all aspects of electrical design, ranging from: field survey, calculations, computer aided drafting (CAD), equipment selection, coordination with trades, maintaining client standards and relations, and other fundamentals of engineering. Responsibilities • Lead and oversee the electrical design of Infrastructure, transportation, and commercial projects., • Applies knowledge of industry standards and electrical engineering design principles, • Applies knowledge of electrical power design in support of a range of projects, • Applies knowledge of one-line drawings, elementaries, and wiring diagrams, equipment specifications (including transformers, MCC, switchgear, substation equipment), power plans, conduit plans, cable schedules, system studies and protective relay settings, • Applies knowledge of power systems ranging from 120V to 35kV distribution and transmission systems, • Evaluates, selects, specifies, and engineers all electrical engineered systems or products for a project, • Engages in the development of a design through sketches, electronic models, diagrams, and other visual formats, • Utilizes technologies in development of three-dimensional models of electrical systems and provides markups for junior engineers, • Prepares and revises documentation in various electrical phases including site plans, floor plans, diagrams, and details, • Participates in project coordination meetings with internal team members and/or external consultants, owner and contractor, subcontractors, and vendors, • Participates in client project requirement meetings, value analysis, and basic cost estimating, • Participates in the full project cycle, planning phase through construction close-out, • Aids in the development of the project scope, budget, staffing, and schedule, • Prepares and coordinates development the project specifications with construction documents, • Participates in quality assurance and quality control on own projects and projects of peers, • Assists in the development of new standards and specifications for the electrical group, • Assists with the development of proposal for smaller, less complex projects, • Oversees and manages multiple projects, • Participates in constructability review, • Leads one or more teams through all phases of project document production, • Checks the work of others for accuracy and completeness and manages time to meet project budget and schedule, • Participates and collaborates in project team setting and to engage in creative and critical thought, • Visits project sites, record construction progress and existing conditions, attend testing events, • Applies codes and standards which regulate and guide the industry, • Uses AutoCAD, Revit, MicroStation, and Microsoft Word to assemble contract documents, • Stamp and seal electrical drawings and documentation as the responsible engineer of record. Qualifications • Bachelor’s degree in Electrical Engineering, • Licensed Professional Engineer (PE) required. NY PE is preferred, • Minimum of 7 years of experience in electrical engineering and design, • Must have NY/NJ relevant experience, • Transportation and/or infrastructure experience is preferred, • Excellent written and verbal communication skills, and presentation abilities in internal project settings with senior management team, external project stakeholders including senior client management leadership, • Excellent interpersonal skills and staff supervision, • Requisite knowledge, interpretation, and application of National Electrical Code and applicable energy codes, • Strong understanding of all phases of project document production and the relationship between drawings and specifications, • Exceptional knowledge of electrical systems, means, methods, materials, and industry standards BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionDescriptionPrecision Neuroscience is pioneering a brain implant, known as a brain-computer interface (BCI), to restore communication and independence for people with neurological conditions. Our cutting-edge technology is designed to empower people with paralysis to control digital devices—such as computers and smartphones—with their thoughts alone, opening new possibilities for daily life. Precision’s multidisciplinary team brings together leading experts in diverse fields such as neurosurgery, artificial intelligence, machine learning, microfabrication, electrical engineering, and more. We are committed to turning breakthrough scientific advancements into real-world solutions for people affected by conditions such as spinal cord injury, stroke, and ALS. As a Precision employee, you will be joining one of the fastest moving and best-capitalized companies in the emerging field of BCI. Since our founding in 2021, Precision has secured over $155 million in funding, developed and validated our technology, and initiated human trials in collaboration with some of the nation’s top hospitals. We are seeking a Senior Mechanical Engineer to join our Implant Hardware team to design scalable solutions to chronically implanted electronics. This position will best suit someone who is experienced with mechanical design of Class III medical devices with implantable electronics such as IPG, DBS, spinal cord stimulator, cochlear implants, etc. This is an extraordinary opportunity to join our core team to help shape the future of our company. Your work will see commercialization quickly so that we improve the lives of patients who live with neurological disorders in a matter of months and years, not decades. This position is on-site at our Manhattan office. To be eligible for this role, you must currently be based in the United States, and have working rights. Key Responsibilities • Execute hands-on design, testing, and process development tasks for mechanical packaging of implantable electronic components., • Complete hands-on assembly, integration and testing tasks while ensuring rigorous quality control is being enforced., • Collaborate with the rest of our team to publish and present our work., • BS/MS in Mechanical Engineering (ME), Biomedical Engineering (BME) or similar., • 5+ years of industry experience in mechanical engineering roles, preferably in the medical device industry., • Experience designing parts for CNC, injection molding, 3D printing, and die stamping manufacturing techniques., • Experience designing class III medical devices with implantable electronics, • Experience with medical leads, connectors, and feedthroughs., • Experience designing, evaluating, and debugging hermetic seals, laser welded/brazed joints, and thick film metalization., • Experience with compression molding, liquid injection molding, or overmolding, • Excellent organizational and communication skills; able to collaborate with neuroscientists, neurosurgeons, and electrical, software, materials, and bio engineers., • Expert in CAD (we use SolidWorks) and finite element analysis FEA, • Track record of working towards accelerated timelines.

Job DescriptionWelcome to Fi. We’re a passionate team from Square, Google, Peloton, Uber, and more working to transform the dog-human relationship. Our mission? Develop cutting-edge technology to revolutionize what it means to be a dog parent. The dog industry remains firmly stuck in the past and we are here to change that. Fi is leveraging our team's talent and expertise to improve the lives of the millions of dogs in the U.S. Real-time location tracking, activity, sleep and behavior monitoring – and that's just the beginning. The most exciting aspect of our work? Bridging the communication gap between dogs and humans. Imagine a world where everyone knows how their dog feels in real time and how to keep their best friend in good shape. That's the future we're building at Fi. If you're someone who thrives in innovative, collaborative work environments and feels strongly about helping dogs live longer, better lives, Fi could be the perfect fit. Join us in our pursuit of the “impossible,” or as we call it here “let me find a way,” to redefine the future of dog ownership together. Fi is looking for a Staff Mechanical Engineer! We’re looking for a Staff Mechanical Engineer to own the design and execution of Fi’s hardware products. You will play a key role in shaping product-level design from concept through mass production, and set a high bar for mechanical engineering on the team. This role is ideal for someone with deep fundamentals in consumer electronics who also knows how to be scrappy and make smart tradeoffs in a startup environment. The right candidate will be capable of growing into a leadership role over time, guiding others and influencing the direction of Fi’s mechanical engineering function.What You’ll Do: • Lead product mechanical designs: Drive the development of rugged, compact, high-performance hardware for Fi products—from early concepts through global mass production., • Prototype and iterate quickly: Build and evaluate prototypes at every stage of development, from 3D-printed proof-of-concept parts to fully functional pre-production builds. Use hands-on testing and iteration to rapidly validate designs., • Set the standard: Establish best practices in design, documentation, and testing, raising the technical bar., • Work with suppliers: Collaborate directly with overseas tooling and molding partners (including on-site involvement in China) to drive DFM, tooling validation, and production optimization., • Hands-on problem solving: Debug molding machine parameters, troubleshoot production challenges, and ensure finishing quality to get designs successfully to market., • Reliability ownership: Define and execute product reliability testing—deciding what should be tested and how to design effective tests., • Cross-functional collaboration: Partner with industrial design, electrical engineering, and firmware teams to deliver balanced designs that meet technical, aesthetic, and user needs., • Innovate in wearables and IoT: Push the limits in advanced antenna integration, waterproofing, and device miniaturization without sacrificing durability.What You Bring to the Table:, • Experience: 10+ years in mechanical engineering for high-volume consumer electronics, wearables, or IoT products, ideally with startup experience., • Expertise: Deep fundamentals in plastic and metal part design (Solidworks CAD preferred), with hands-on experience in injection molding, die casting, MIM, stamping, machining, and adhesives., • Prototyping chops: Strong experience with 3D printing, machining, and other rapid prototyping methods to validate designs quickly., • Supplier collaboration: Proven success working closely with overseas vendors, including on-site work with Chinese-speaking partners. Strong communication skills to bridge technical details and cultural nuance., • Analytical ability: Skilled at estimating performance before prototyping, using FEA, hand calculations, and engineering judgment., • Reliability focus: Experience designing and executing reliability and validation testing for consumer electronics., • Product-level ownership: End-to-end experience leading the mechanical design of entire products, from industrial design collaboration to sustaining engineering., • Adaptability: Comfortable balancing best-practice rigor with the speed and tradeoffs of a fast-paced hardware startup., • Dog lover: Our NYC office is dog-friendly—your toughest beta testers are right here.Why You'll Love Us:, • Time to Recharge: Enjoy flexible PTO to take the breaks you need., • Top-Notch Health Coverage: We’ve got your back (and teeth and eyes) with full medical, dental, and vision insurance., • Wellness Perks: Free access to One Medical, Kindbody, and Talkspace to keep you feeling your best., • Give Back to the Pups: Make tails wag with a $500 annual donation to a dog charity of your choice through our BarkBack Program., • Free Fi Membership: Your furry best friend(s) get all the benefits of a Fi collar, on us! Fi is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Fi makes hiring decisions based solely on qualifications, merit, and our needs at the time.

Job Description Are you ready to unleash your creativity and technical skills? Northern Wolves Inc is searching for a talented HVAC Engineer, Drafter to join our dynamic team! As an HVAC Engineer, Drafter, you will play a crucial role in transforming innovative design concepts into practical, functional HVAC systems that enhance comfort and efficiency. You will collaborate with engineers, architects, and project managers to create detailed drawings and specifications for HVAC installations. Your knack for precision and attention to detail will be essential as you draft plans and ensure they align with our commitment to quality and sustainability. If you’re passionate about drafting and designing cutting-edge HVAC solutions and want to contribute to exciting projects that make a difference in our communities, we would love to have you on board! Responsibilities • Create detailed HVAC drawings using CAD software based on project specifications and designs., • Collaborate with engineers and project teams to understand design requirements and implement feedback., • Produce calculations for load requirements and system performance., • Review and modify designs to comply with industry standards and regulations., • Assist in the preparation of project documentation, including technical specifications and reports., • Participate in project meetings and communicate effectively with team members and clients., • Associate’s or Bachelor’s degree in Mechanical Engineering, Architectural Drafting, or a related field., • Minimum of 2 years of experience in HVAC drafting or engineering., • Proficient in CAD software (AutoCAD, Revit, etc.) and other drafting tools., • Strong understanding of HVAC systems, load calculations, and industry standards., • Excellent attention to detail and problem-solving skills., • Effective communication skills and a collaborative mindset., • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Training & Development, • Work From Home, • Free Food & Snacks

Job Description About Synaptrix Labs Inc. Synaptrix is on a mission to revolutionize brain-computer interfaces through non-invasive approaches. We believe that the power to diagnose and treat neurological conditions safely, and to expand human potential, will become a reality with the right fusion of deep learning, signal processing, and computational neuroscience. We are seeking an Electrical Engineer with strong expertise in RF circuit design, BLE communication systems, and microcontroller-based embedded hardware. The ideal candidate should possess practical experience through internships, research projects, or hands-on prototyping. Responsibilities: • Design, simulate, and test RF and BLE hardware circuits, including filters, matching networks, amplifiers, and antenna interfaces., • Develop and debug microcontroller-based embedded systems (ARM Cortex, RISC-V, or similar architectures)., • Implement and optimize firmware for communication, control, and sensor processing tasks., • Create and validate PCB designs, ensuring signal integrity, EMI/EMC compliance, and power efficiency., • Collaborate with firmware engineers for protocol stack integration (SPI, I²C, UART, BLE, RF)., • Conduct RF measurements and system characterization., • Perform hardware bring-up, testing, and performance validation across analog and digital subsystems., • Experience Requirement: 4 years with a Bachelor's, 2 years with a Master's, or equivalent research experience with a Ph.D. in Electrical, Biomedical, or Computer Engineering., • Internship or academic project experience in RF, BLE, or embedded hardware design., • Proficiency in microcontroller architecture and programming (C/C++, Assembly, or TinyML)., • Experience with RISC/ASIC-based systems programming for embedded applications., • Familiarity with EDA and RF simulation tools (Altium Designer, ADS, HFSS, or Cadence)., • Hands-on experience using oscilloscopes, spectrum analyzers, and power analyzers for testing and debugging., • Hands-on experience with BLE modules, RF transceivers, or antenna integration., • Prior work or research in IoT, wearable, or biomedical device hardware., • Knowledge of product compliance and EMI/EMC mitigation practices., • Familiarity with CAD software, MATLAB, or LabVIEW for test automation and data acquisition., • Excellent analytical, communication, and documentation skills. At Synaptrix Labs, we celebrate curiosity, open collaboration, and scientific rigor. Our interdisciplinary team spans neuroscience, AI, and clinical research, and we are united by the belief that non-invasive BCI is the key to unlocking a new era in healthcare, accessibility, and human augmentation. What We Offer: • Competitive salary + equity, • An opportunity to change the world and work with some of the smartest and most talented experts from different fields, • Growth potential; we rapidly advance team members who have an outsized impact, • Paid holidays, unlimited PTO

Job Description Seeking an Electrical Engineer with a focus in lighting. This individual should have experience in lighting audits, lighting design, and lighting commissioning. Applicant should have knowledge of lighting systems and their components, as well as LL88 and NYC Energy Code, and lighting energy calculations. 3+ years of experience and EIT certification preferred. Experience with Excel and CAD/REVIT required. Duties • Lighting Audits, • Lighting Design, • Electrical Design, • Electrical Construction Oversight Salary Range: $80,000-$120,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Electrical Engineering degree or equivalent experience, • Autocad/Revit Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Mechanical Engineer to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days., • Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilizing advanced CAD software to create detailed 2D and 3D models., • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to strictly comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and cutting-edge design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Requirements: Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software or mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment.

Job DescriptionSalary: $80,000 - $115,000 Annually New York Peace of Mind Technologies (POM), is currently searching for a qualified, enthusiastic, hard-working and driven Estimator that embodies POMs core values to join our Company. About You You are driven and understand how to manage priorities and coordinate effectively with team members to meet deadlines. You are comfortable with numbers, technically skilled and have the ability to stay focused and maintain great attention to detail while under pressure. About Us Peace of Mind Technologies, LLC (POM) is New Yorks premier systems integrator for security and surveillance technology. Specializing in high-tech systems, cloud-based software services and audio/video solutions for thousands of businesses, schools and properties in the greater New York Metropolitan area, POMs diverse client roster comprises a wide range of prestigious and well-known organizations. Founded in 2002, POM has handled more than 2,000 site installations, primarily focused on large offices, retail, hospitality, health care, education, and real estate (commercial, luxury residential and hi-rise). Roles & Responsibilities Realize Client Objectives. The Estimator reviews the prospects needs and wants for the product/services offered and works with the Senior Sales Engineer, System Engineers and the Sales team to develop the right solution. • Gathers relevant site details in order to create the scope of work including equipment and labor estimate., • Review and interpret project bid specifications., • Conduct site-walks with team. Support the Company Growth. The Estimator provides accurate and timely project estimates/quotes to the sales team that support the detailed scopes of work outlined in Sales Proposals, RFIs, RFPs etc. • Review & edit detailed scopes of work & product details in Sales Proposals, • Respond to requests for proposals (RFPs), • Create requests for information (RFIs), • Review product estimate and system design with sales department and other key internal resources. Increase Profit Margin. The Estimator levels vendor quotes and negotiates costs to increase profit margins, as well as identifies missing components in the scope of work to avoid additional project costs and reduced margins after the project is sold. • Documentingequipment needed and labor time required for each project, • Gather information to determine proper system components from internal and vendor resources, • Build vendor relationships and negotiate quotes. Exceed Client Expectations. The Estimator assists with the management of the quote calendar and prioritize accordingly to ensure that the sales team can meet RFP deadlines. Desired Skills and Experience • Disciplined work ethic, • Must know how to read construction drawings and do device take offs, • Excellent communication and writing skills, • Experienced and proficient with Microsoft Excel, Visio, and Outlook., • CAD and D-Tools experience a plus., • College Degree, • 2 5 years technical experience with electronic security, IT and/or low voltage systems., • Prior field based installation or project management experience is a plus. Does this sound like you? Benefits Include: • Annual salary commensurate with experience., • Health benefits package, • Voluntary dental, vision, disability and life insurance plans, • 401k plan with matching, • Company sponsored life insurance policy, • Pre-tax commuter benefit, • Generous paid-time-off policy Candidates must be authorized to work in the US. No agencies please. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionSalary: $80,000 - $120,000 Annually New York Peace of Mind Technologies (POM), is currently searching for a qualified, enthusiastic, hard-working and driven A/V Sales Engineer that embodies POMs core values to join our Company. About You You are driven and understand how to manage priorities and coordinate effectively with team members to meet deadlines. You are comfortable with numbers, technically skilled and have the ability to stay focused and maintain great attention to detail while under pressure. About Us Peace of Mind Technologies, LLC (POM) is New Yorks premier systems integrator for technology. Specializing in high-tech systems, cloud-based software services and audio/video solutions for thousands of businesses, schools and properties in the greater New York Metropolitan area, POMs diverse client roster comprises a wide range of prestigious and well-known organizations. Founded in 2002, POM has handled more than 2,000 site installations, primarily focused on large offices, retail, hospitality, health care, education, and real estate (commercial, luxury residential and hi-rise). Roles & Responsibilities Realize Client Objectives. The A/V Sales Engineer reviews the prospects needs and wants for the product/services offered and works with the Senior Sales Engineer, System Engineers and the Sales team to develop the right solution. • Gathers relevant site details in order to create the scope of work including equipment and labor estimate., • Review and interpret project bid specifications., • Conduct site-walks with team. Support the Company Growth. The A/V Sales Engineer provides accurate and timely project estimates/quotes to the sales team that support the detailed scopes of work outlined in Sales Proposals, RFIs, RFPs etc. • Review & edit detailed scopes of work & product details in Sales Proposals, • Respond to requests for proposals (RFPs), • Create requests for information (RFIs), • Review product estimate and system design with sales department and other key internal resources. Increase Profit Margin. The Estimator levels vendor quotes and negotiates costs to increase profit margins, as well as identifies missing components in the scope of work to avoid additional project costs and reduced margins after the project is sold. • Documentingequipment needed and labor time required for each project, • Gather information to determine proper system components from internal and vendor resources, • Build vendor relationships and negotiate quotes. Exceed Client Expectations. The A/V Sales Engineer assists with the management of the quote calendar and prioritize accordingly to ensure that the sales team can meet RFP deadlines. Desired Skills and Experience • Disciplined work ethic, • Must know how to read construction drawings and do device take offs, • Excellent communication and writing skills, • Experienced and proficient with Microsoft Excel, Visio, and Outlook., • CAD and Tigerpaw experience a plus., • College Degree, • 2 5 years technical experience with electronic security, IT and/or low voltage systems., • Prior field based installation or project management experience is a plus., • Must be authorized to work in the US. Does this sound like you? Benefits Include: • Annual salary commensurate with experience., • Health benefits package (50% of premium is covered for health), • Voluntary dental, vision, disability and life insurance plans, • 401k plan with matching, • Pre-tax commuter benefit, • Generous paid-time-off policy, • Hybrid work model, • Salary $80,000 - $120,000 annually. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. No agencies please.

Job DescriptionPOSITION SUMMARY: The Bridge Engineer Project Manager is a highly experienced design professional with 8+ years of experience in bridge design and transportation infrastructure. This individual will lead project management, client relations, and oversee the design and engineering services throughout all phases of bridge projects, working under the supervision of the Department Manager. The Project Manager will be responsible for delivering high-quality bridge design solutions for state, county, and federal projects. PRIMARY DUTIES: • Plan, develop, and manage bridge engineering projects for clients, including DOT, county, and other transportation agencies., • Support bridge design efforts, ensuring technical excellence and compliance with regulations and standards, such as AASHTO, NJDOT, and PennDOT design manuals., • Coordinate with multidisciplinary teams to prepare technical reports, detailed construction drawings, and specifications for bridge projects., • Maintain strong technical knowledge of bridge design techniques, procedures, materials, and relevant engineering software., • Perform independent, engineering calculations for bridge structures and create accurate construction plans and estimates., • Ensure all design work adheres to client and corporate quality control procedures throughout the project life cycle., • Review and provide feedback on the work of engineers, CAD drafters, and other technical staff to ensure accuracy and quality., • Interact with clients and oversee the work of subconsultants, ensuring the project meets the agreed-upon goals and specifications., • Assist in new business development, including attendance at industry events and participation in project proposal presentations., • Extensive experience in bridge design and engineering, including the application of AASHTO, NJDOT, and PennDOT standards., • Proven experience managing complex bridge engineering projects from design through construction., • Familiarity with design software such as AutoCAD, MicroStation, and bridge-specific tools like LEAP Bridge and STAAD., • Strong understanding of DEP, stormwater, and environmental regulations that impact bridge projects., • Ability to work effectively in a team environment and provide leadership in technical project delivery., • Proficiency with Microsoft Office software, including Excel, Word, and Project for tracking project data., • Strong knowledge of bridge design manuals, procedures, and relevant engineering software., • Experience on major DOT projects (NJDOT, PennDOT, NJTA, PANYNJ) with a focus on bridge design., • NBIS Certification is preferred but not required, • Knowledge of modern bridge construction techniques, materials, and specifications.EDUCATION/EXPERIENCE:, • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • PE License Preferred, • EIT License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Auto-Chlor is now hiring an Electrical Engineer-Equipment Design to lead our engineering development initiatives. We’re looking for a leader who will contribute to our “People First” culture. This position would work in-office full-time at our facility in MEMPHIS, TN. What’s in it for you? • A people first culture where contributions and collaboration are encouraged and celebrated., • A competitive salary up to $150k annually with an excellent benefits package., • Ongoing wellness initiatives to improve your health and well-being. What are some of the day-to-day responsibilities? • Develops and implements solutions for dishwasher and dispensing innovation projects, including both new equipment development and existing equipment innovation. Projects vary in duration from two months to over a year based on Project Brief requirements., • Administers regulatory compliance with agencies such as NSF, CSA, UL, BOCA, ASSE, UPC, and Federal, State, and Local authorities. Provides support to the field sales team on regulatory issues, with an emphasis on maintaining customer equipment operation without disruption to business., • Provides technical support to field sales team, contractors, consultants, engineers, and architects., • Develops and manages technical documentation for design control and field use. Requirements: • Bachelor of Science in Engineering Degree or comparable years of work experience., • 5-10 years of electrical and electronic design experience, along with experience working with regulatory agencies. Experience in the commercial appliance industry is preferred., • Embedded Software/hardware design, • Knowledge of codes and standards for plumbing, sanitation, electrical, and building (NSF, CSA, UL, BOCA, ASSE, UPC, FDA), • Electrical/electronic circuit design, • CAD Modeling – Autodesk Inventor Preferred Location: 746 Poplar Ave Memphis, TN 38105 #PROFESSIONAL

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Palantir Foundry is an end-to-end platform for data-driven decision-making, and as a 3D Software Engineer, you will play a pivotal role in extending its capabilities to handle advanced 3D visualization and geospatial workflows. We're transforming the way organizations integrate and interact with complex 3D data—such as gaussian splats, point clouds, BIM files, CAD models, and schematics—so they can build reliable, mission-critical applications atop a unified foundation. In this role, you will join a specialized team within Foundry focused on 3D tools and visualization, working closely with industries like Architecture, Construction, Automotive, Aerospace, Space, Oil and Gas, Mining, and Utilities. Our customers use Foundry to visualize and analyze 3D models and geospatial data to support their daily operations, across infrastructure planning, asset management, digital twins for industrial facilities, and real-time monitoring of complex engineering systems. As a 3D Software Engineer, you will be responsible for designing and developing cutting-edge tools that allow thousands of users to interact with 3D data in intuitive and powerful ways. You will develop new end-to-end approaches for displaying 3D geometry—from offline pre-processing of large datasets to novel realtime approaches on the GPU—and build applications that use them for visualization and analysis. Your work will empower customers to build sophisticated applications, such as interactive dashboards for construction sites, geospatial analysis tools for mining operations, or simulation environments for aerospace design. You may spend one day collaborating with customers in the construction sector to understand their needs when visualizing BIM files, identify gaps in their current tools, and prototype solutions. The next day, you might brainstorm with teammates on optimizing shader performance for rendering large-scale point clouds or voxel models in real time, or work with backend engineers to define APIs and schemas that back these workflows. You’ll regularly face sophisticated technical problems, requiring you to scope out the solution design and find an incremental path to ship new features. As part of this, you will own APIs and schemas that power your frontend code, or work with other backend engineers in developing them together. Below are some examples of the types of product work you’d get to do in this role: • 3D Visualization Tools: Build interactive tools for rendering and manipulating 3D models, such as CAD and BIM files, enabling architects and engineers to explore designs in real time. • Geospatial Workflows: Develop features for visualizing and analyzing geospatial data like gaussian splats, point clouds, and voxel models, supporting use cases in utilities, mining, oil and gas exploration, and urban planning. • Shader Development: Write and optimize custom shaders to enhance the performance and visual fidelity of renderings for applications in aerospace and automotive design. • Digital Twins: Create interfaces for integrating 3D schematics and real-time sensor data, powering digital twin applications for utilities and industrial facilities. • Performance Optimization: Solve complex challenges related to rendering large-scale 3D datasets, ensuring smooth performance for end-users in high-stakes environments like space mission planning. Frontline Foundry Software Engineers may be offered the opportunity to Frontline, an exclusive program unlike any other. This unique, short-term assignment involves being embedded with customers, allowing you to work directly with users and gain firsthand insight into how our products are used and the challenges our customers face. Unlike traditional engineering roles, Frontline immerses you in complex, ambiguous problems, empowering you to deliver impactful solutions across some of the world’s most important industries and institutions. Some of our most successful products were built on the factory floor, addressing real-world problems for the world's most important institutions. These products were developed by some of our most successful product engineers, who began their careers in roles aligned with Frontline responsibilities, gaining a deep understanding of both our technology and our customers. Frontliners operate across a broad spectrum of responsibilities, much like a startup CTO. They work in small teams to own the end-to-end execution of high-stakes projects. This spectrum ranges from discussing architecture and building custom web apps to conducting workshops with users and strategizing with customer executives. No two days are alike, as each day is diverse and impactful. By witnessing how customers engage with Foundry and experiencing these pain points firsthand, you’ll gain unique insights that feed directly back into our development process, helping to refine and enhance our products.Core Responsibilities • Creating 3D tools and environments for visualizing and analyzing a variety of data types, • Collaborate with industry experts to create tailored visualization solutions for construction and manufacturing., • Building products which aim to make technical concepts accessible for non-technical users, • Working as part of a community of engineers building shared frontend tooling to enable teams across Foundry, • Designing and building for high-scale data intensive APIsTechnologies We Use, • Typescript, React, and GQL are central to our frontend development., • Three.js, WebGL, GLSL, and similar technologies for rendering and manipulating 3D models and geospatial data., • Blueprint as a re-usable front end component library., • A combination of open-source and internal technologies that suit the problems at hand., • Industry-standard build tooling, including Gradle, Webpack, GitHub, and CircleCI.What We Value, • Passion for improving user workflows by building 3D interfaces that enable users to solve complex problems, such as visualizing infrastructure or analyzing geospatial data, while maintaining engineering quality., • Ability to work collaboratively in teams of technical and non-technical individuals and understand how technical decisions impact the people who will use what you're building., • Skill and comfort working in a constantly evolving environment with dynamic objectives and iteration with users., • Experience brainstorming and iterating with product designers., • Experience building high-quality software in a fast-paced CI/CD development environment., • Proven ability to learn continuously, work independently, and make decisions with minimal supervision., • Ability to learn new technology and concepts, even without in-depth experience., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance is beneficial, but not necessary.What We Require, • 2+ years of software engineering experience, with a focus on graphics, visualization, or geospatial data processing., • Strong frontend coding skills used to write clean, effective, and performant code, regardless of framework., • Familiarity with concepts common to 3D data transmission and rendering, including data structures, rendering frameworks (e.g. three.js, deck.gl), GLSL or similar languages for shader programming, linear algebra., • Proficiency with programming languages such as JavaScript/TypeScript or other similar languages.

Job Description About Synaptrix Labs Inc. Synaptrix is on a mission to revolutionize brain-computer interfaces through non-invasive approaches. We believe that the power to diagnose and treat neurological conditions safely, and to expand human potential, will become a reality with the right fusion of deep learning, signal processing, and computational neuroscience. We are seeking a full time Product Design Engineer who can take a concept from rough sketch to manufacturable hardware. You will own designs for the Neuralis headset and related accessories. You will work closely with electrical engineers, researchers, and manufacturing partners to create hardware that feels simple to the patient and powerful under the surface. Responsibilities: • Create detailed CAD models for complete product assemblies, • Design mechanical structures, mechanisms, and enclosures for EEG based hardware, • Select materials and validate tolerance choices for reliability and repeatability, • Build and test early prototypes through printing, machining, or custom fixtures, • Translate industrial design concepts into engineering ready models, • Prepare clear documentation for vendors and fabrication partners, • Run rapid iteration cycles with the research team as new requirements appear, • Expert level skill with CAD tools such as SolidWorks, Onshape, or Fusion, • Strong knowledge of materials, tolerances, and mechanical design principles, • Experience with creating prototypes using printing, machining, or model shops, • Ability to take a full product from early concept to production ready design, • Familiarity with small consumer electronics or wearable product design, • Experience working on medical devices or neural interface hardware, • Knowledge of plastics, silicones, and soft goods used in wearables, • Understanding of production methods such as injection molding and CNC workflows At Synaptrix Labs, we celebrate curiosity, open collaboration, and scientific rigor. Our interdisciplinary team spans neuroscience, AI, and clinical research, and we are united by the belief that non-invasive BCI is the key to unlocking a new era in healthcare, accessibility, and human augmentation. Expected Compensation: The base salary for this role is anticipated to fall within the following range. Actual compensation will depend on your experience, technical expertise, and relevant education or training. In addition to base pay, Synaptrix offers equity to all full-time employees, reflecting our commitment to shared success and long-term company growth. Base Salary Range: $95,000 - $150,000 USD What We Offer: • An opportunity to change the world and work with some of the smartest and most talented experts from different fields, • Growth potential; we rapidly advance team members who have an outsized impact, • Unlimited PTO

Job Description Applied Physics is seeking a talented Electromechanical Engineer to join our team. As an Electromechanical Engineer at Applied Physics, you will work on a variety of exciting and challenging projects in fields ranging from energy storage to space exploration. Responsibilities: • Design and develop electromechanical systems from concept to production, • Conduct feasibility studies, simulations, and prototyping, • Collaborate with cross-functional teams to integrate electromechanical systems into larger products, • Develop and conduct tests and analyze data to ensure product reliability and performance, • Identify and troubleshoot problems during the product development phase, • Bachelor's or Master's degree in Electrical Engineering or a related field, • At least 3 years of experience in electromechanical design and development, • Proficient in CAD software such as SolidWorks, AutoCAD, or equivalent, • Familiarity with electrical and mechanical components such as motors, sensors, controllers, and actuators, • Strong problem-solving and analytical skills, • Experience with PCB design and assembly is a plus, • Experience with mechatronics or robotics is a plus, • Familiarity with international standards and regulations for electromechanical systems is a plus We offer a competitive salary and benefits package, flexible work hours, and opportunities for growth and career development. Join our dynamic and passionate team and help us make a positive impact on the world. If you are a talented, motivated, and empathetic individual who shares our passion for making a difference, we encourage you to apply for this exciting opportunity to work with our team at Applied Physics. Applied Physics is an equal opportunity employer.

Job Description We are seeking an HVAC Sheetmetal Drafter to become part of our team! Our projects intersect many sectors from Leading Technology Firms/Hotels/Educational Campuses/Bio Labs/Multi-Family Housing/Commercial Industries/Finance Industry/Tenant Fit out and more...Employees gain a wealth of experience through drafting different projects and regularly interact with Design Professionals to gain project approval. Qualifications: • Proficiency in CAD, Navisworks, and other drafting tools, • Strong understanding of mechanical engineering principles and design standards, • Detail-oriented individual with strong analytical and problem-solving abilities, • Self-motivated and driven self-starter with high integrity, • Work with senior draftsmen, estimating team and project management team to understand the scope of work and installation intent to accurately design and produce shop drawings and as-built drawings, • Field Surveying Job Site to confirm dimensions, • Ensure compliance with benchmarks, ceiling heights and tolerances, • Flag conflicts on shop drawings that require architect/engineer review, • Ability to layout equipment and orientation of mechanical equipment as required, • Conduct thorough reviews of mechanical plans and drawings for accuracy, compliance, and feasibility, • Produce accurate shop drawings based on industry standard and norms, • Review and modify designs if mechanical plans presented are not achievableCompany DescriptionFounded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job DescriptionRadical AI, Inc. is an artificial intelligence company that is accelerating scientific research & development. We are at the forefront of innovation in the field of materials R&D, a critical driver for advancing our most cutting-edge industries and shaping the future. Breaking away from the traditionally slow and costly R&D process, Radical AI leverages artificial intelligence and machine learning to pioneer generative materials science. This innovative field blends AI, engineering, and materials science, revolutionizing how materials are created and discovered. Radical AI's approach speeds up R&D and addresses global challenges, setting new benchmarks in technology and sustainability. As a Mechatronics Engineer at Radical AI you will serve as the bridge between Mechanical Engineering and Software to operationalize a suite of novel robotic and autonomous systems to drive a first of its kind material science research and discovery laboratory. You will help ideate scalable designs for driving and automating state of the art lab equipment in part by specifying motors, motor drivers, actuators, encoders, sensors, and control systems. You will drive the integration of electromechanical systems and the foundational power and control systems, equipment, and hardware to operate our equipment safely and reliably. Your experience and vision will shape both the physical and systematic implementation of a lab-wide autonomous integrated control scheme. You will collaborate closely with Mechanical Engineering and Software to meet rigorous and sometimes dynamic design requirements at a profound deployment speed. You will maintain and optimize control system performance to meet throughput and reliability metrics that are critical to the success of the technology. Mission • Contribute to and actualize the vision of the Mechanical Engineering team as we tackle solving complex and interconnected material handling challenges, and innovate novel solutions to automating the operation of existing equipment and systems., • Leverage your industry experience to instill team-wide adoption and utilization of ‘right tool for the job’ off-shelf solutions to accelerate the deployment of control, power, safety, and sensing systems., • Execute on the design and implementation of precision motion control systems and associated sensors and encoders., • Design and assemble the power and control cabinets to drive our systems with a focus on design flexibility and industry standard best practices for safety systems to protect our people and our technology., • Swiftly debug and trouble shoot electromechanical systems to maximize facility and equipment uptime. Help shape the culture of the hardware team by leading from the front and demonstrating a disciplined sense of organization, eye for detail, and an impeccable level of polish and craftsmanship., • Bring an attitude of collaboration and openmindedness, to facilitate fearless and creative problem solving that empowers our team to ship world class technology at an unprecedented speed.About you, • Minimum B.S. in Electrical, Mechanical, or Mechatronics Engineering or a closely related field., • 3-5 years industry experience in robotics, industrial automation, or a closely related field., • A strong fundamental understanding of electrical engineering and industry best practices., • Competency with CAD software, we use SOLIDWORKS., • Experience with PLCs, motor drivers, and industrial automation., • Knowledge of control systems, embedded systems, and automation technologies., • Excellent communication and interpersonal skills.Pluses, • Familiarity with programming languages like Python., • Familiarity with 6 DOF arms cobots, and their implementation., • Hands on experience with rapid prototyping and machine fabrication techniques., • Experience or exposure to the design and utilization of material handling systems (AMRs, ASRS, conveyance systems, etc)What we offer, • A competitive compensation package also includes the best in benefits:, • Medical, dental, and vision insurance for you and your family, • Mental health and wellness support, • Unlimited PTO and 14+ company holidays per year, • 401K, • Work closely with a team on the cutting edge of AI research. Disclosure Radical AI is committed to equal employment opportunity regardless of race, color, ancestry, national origin, religion, sex, age, sexual orientation, gender identity and expression, marital status, disability, or veteran status.

Job DescriptionRadical AI, Inc. is an artificial intelligence company that is accelerating scientific research & development. We are at the forefront of innovation in the field of materials R&D, a critical driver for advancing our most cutting-edge industries and shaping the future. Breaking away from the traditionally slow and costly R&D process, Radical AI leverages artificial intelligence and machine learning to pioneer generative materials science. This innovative field blends AI, engineering, and materials science, revolutionizing how materials are created and discovered. Radical AI's approach speeds up R&D and addresses global challenges, setting new benchmarks in technology and sustainability. As a Mechanical Engineer at Radical AI you will design and build a suite of novel robotic and autonomous systems to drive a first of its kind material science research and discovery laboratory. Our Mechanical Engineering team owns all aspects of the physical manifestation of our technology. You will help define design requirements from a greenfield solution space and then execute on 3D design, prototyping, validating, and installing mechanical systems within our lab. You will solve a vast array of interconnected problems involving material handling, precision motion control, and refitting state of the art laboratory and metallurgical equipment for automation and programmatic control. You will take ownership of individual projects and subsystems and bring them to completion using your knowledge of rapid prototyping and low volume manufacturing techniques. Your hardware will fit in seamlessly with the Radical AI branding language and smoothly interface with peripheral systems and equipment. You’ll leverage your experience and expertise to become an indispensable contributor to collaborative engineering initiatives.Mission • Contribute to and actualize the vision of the Mechanical Engineering team as we tackle solving complex and interconnected material handling challenges, and innovate novel solutions to automating the operation of existing equipment and systems., • Use your 2D and 3D visualization skills to communicate complex ideas, designs, and geometries in group ideation sessions that include a non-technical audience., • Design complex systems and assemblies in CAD to demonstrate viable solutions to automation challenges., • Rapid prototype to prove design efficacy, then facilitate part fabrication from outside vendors to build your system and integrate it with software and controls., • Help shape the culture of the hardware team by leading from the front and demonstrating a disciplined sense of organization, eye for detail, and an impeccable level of polish and craftsmanship., • Bring an attitude of collaboration and openmindedness, to facilitate fearless and creative problem solving that empowers our team to ship world class technology at an unprecedented speed.About you, • Minimum B.S. in Mechanical Engineering or a closely related field., • 3-5 years industry experience in mechanical engineering involving part and assembly design., • Proficiency with CAD software, we use SOLIDWORKS., • Well versed in common rapid prototyping and part fabrication techniques and DFM best practices., • CNC part design, sheet metal part design, 3D printing, metal casting, etc., • Proven track record of delivering novel mechanism and machine designs. Excellent hands on fabrication and assembly skills., • Excellent communication and interpersonal skills.Pluses, • Experience in industrial automation settings and design of automation equipment., • Familiarity with 6 DOF arms cobots, and their implementation., • Experience with PLCs, motor drivers, and motion control systems. Experience with simulation and analysis tools like FEA or CFD., • Experience or exposure to the design and utilization of material handling systems., • AMRs, ASRS, conveyance systems, etc.What we offer, • A competitive compensation package also includes the best in benefits:, • Medical, dental, and vision insurance for you and your family, • Mental health and wellness support, • Unlimited PTO and 14+ company holidays per year, • 401K, • Work closely with a team on the cutting edge of AI research. Disclosure Radical AI is committed to equal employment opportunity regardless of race, color, ancestry, national origin, religion, sex, age, sexual orientation, gender identity and expression, marital status, disability, or veteran status.

Job DescriptionABOUT DURANTA & WHAT WE’RE LOOKING FOR Duranta's mission is to help create a more beautiful world. We are achieving this goal by building the world's most sophisticated platform for analyzing geospatial data, and combining it with intuitive workflows to help contractors design, install and maintain beautiful outdoor spaces. We are seeking a Senior Back-end Engineer to join our team. You will be responsible for development of the back-end for our web-application and for the mobile apps. You will be responsible for development of the back-end for our web-application and for the mobile apps. We highly value expertise in building smooth and pleasant UI experiences, so your job will include building a highly optimized stack where every millisecond of delay counts.RESPONSIBILITIES & FOCUS AREAS • Building backends for modern web applications, • Building a backend for offline-capable web and mobile applicationsYOU WILL THRIVE IF YOU HAVE, • At least 8 years of experience in the modern backend web development, • Deep knowledge of Go-based server development, • Experience setting up CI/CD pipelines, • Experience with relational databases (PostgreSQL, MySQL), • AWS experience (DynamoDB, S3, EC2, IAM), • Experience designing robust APIs for distributed systemsDevOps experience (Terraform, CloudFormation)AND FOR EXTRA CREDIT…, • Basic knowledge of computer graphics, • Experience in building CAD applications, 3D games, or any other computer graphics related applications, • Experience in developing offline-capable applications, • OpenTelemetry experience, • Using and developing with KubernetesDURANTA VALUES, • API = Assume Positive Intent. The company, the relationship with co-workers and customers, and life is so much better and more fun if you follow this rule., • Speed is the essence. We are in a hurry to make a difference., • Expect Peak Performance. We strive for excellence and empower those around us to do the same.

Job DescriptionThe Senior Substation Electrical Engineer is an integral resource to our Power Substation leadership (and supporting team) as you lead programs and a team of engineers on Milhouse projects. You will lead protective system designs, physical layout designs, and calculations, as well as coordinate with other disciplines on substation projects. Your main responsibilities can include creating electrical protection & control and/or physical layout design deliverables for a range of Substation projects. Focus will be on the delivery of substation automation systems for our high voltage substation projects. Typical projects include working within multi-disciplinary teams to assist in developing efficient and reliable solutions for intricate substation projects. A key component of your role will be to act as the team’s quality lead on reviewing all design efforts to ensure it aligns with the client and Milhouse standards.**Please note this role will initially be remote - we are in the process of acquiring office space and this position will be required to follow our hybrid schedule of 4 days in-office once that is established.What you will do: • Apply clients’ standards, guidelines, specifications, practices and procedures or appropriate industry standards in preparing design drawings as well as coordinate design activities to ensure installation and operations comply with all specifications, codes, and client requirements., • Deliver the assigned projects on time, within budget and meet agreed scope., • Regularly communicate and coordinate project activities with internal team members and build relationships with clients, • The design and delivery of green and brown field high voltage electrical substation project., • Support the development of P&C one line diagram, AC/DC schematics, control panel layout and wiring diagram, station service AC/DC distribution diagram, bill of material, cable schedule, etc., • Lead all quality assurance efforts on behalf of the team, • Manage project subordinates and/or other project/discipline resources to quality, schedule, and budget requirements., • Creating and enforcing project quality plan., • Prepare proposals, contract amendments, change order documentation, and claim documentation., • Ability to consistently work independently and present high quality of work., • Lead project resource teams assigned to support projects., • Maintain positive working relationships between the client and prime consultants., • Provide documented scope, schedule, deliverables, and budgets., • Provide progress reports, project milestones, scope changes, budget forecasting/analysis, and schedule updates to the team., • Monitor cost accounting, invoicing, and closing out of projects., • Ability to manage / lead several simultaneous projects., • Work with team to ensure all required deliverables are prepared, submitted, and tracked., • Coordinate with finance group to confirm invoicing and receiving payments on a timely basis., • In charge of QA/QC on assigned projects., • Provide project status information to the Managers and team., • Assist management as directed., • Ability to roll up sleeves and support project execution as neededWho you are:, • Proven ability to consistently produce high quality of work, • Ability to consistently work independently, • Advanced presentation, written, verbal communication skills, • Knowledge of applicable codes and standards., • Familiar with discipline specific design software and design management systems., • Familiar with Grounding Calculations, • Memberships and active participation in discipline specific professional organizations such as IEEE., • Experience with power system studies such as short circuit and coordination studies., • Experience with preparing relay settings., • Familiarity with applicable IEEE / EIC codes and standards., • Understanding of CAD software., • Ability to estimate, plan, and schedule substation projects, • Ability to support proposal activities, • Proficient in Microsoft Windows, Word, and Excel as well as ACAD or MicroStation and RevitYour background:, • Four-year bachelor’s degree in electrical engineering from an ABET accredited institution., • 13 - 20 years of protection & control / substation design engineering experience., • P.E preferred and eligible., • Local utility agency experience preferred, • Project management experience preferred, • Distribution experience is a plus.At Milhouse, we’re more than just a place to work — we’re a place to grow, thrive, and be celebrated. Here’s how we invest in you:, • Medical, Dental & Vision Coverage – Reach out to learn how your deductible could be covered 100% through Garner Health!, • Company Sponsored Life Insurance and Short-Term Disability – We’ve got your back when life takes unexpected turns., • Voluntary Coverages – Take control of your well-being with added coverage options., • Discounted Gym Membership – Stay active with wellness options that support your fitness goals., • Competitive Base Salary – Earn what you're worth in a performance-driven culture., • 401(k) Retirement Plan – Build your future with confidence., • Professional Development Incentives – Get rewarded for growing your skills — including bonuses for earning your P.E. License., • Milhouse University (Cross-Functional Training) – Expand your expertise with internal training built to elevate your career and receive PDH credits for applicable training towards professional engineering licenses, etc.., • Employee Education & Development Program – Tuition assistance and learning opportunities to keep you moving forward., • Generous PTO + Paid Holidays – Rest, recharge, and enjoy the moments that matter most., • Paid Parental Leave – Bond with your new arrival — and yes, we’ll even cover a year of diapers!, • Extracurricular Sports Teams – Join our summer Volleyball and Softball squads for fun off the clock., • Employee Recognition Program – Be celebrated for the impact you make., • Employee Referral Bonus – Bring great people on board and get paid for it., • Transit Benefits Program – Save on your daily commute.

Job Description Location: Innovation Lab, Duggal Visual Solutions, Brooklyn, NY Employment Type: Full-time, In-Person /Benefits package offered About Duggal Visual Solutions Duggal Visual Solutions is a global leader in visual innovation, blending creativity, technology, and craftsmanship to deliver extraordinary experiences for the world’s most iconic brands. From interactive digital environments to large-scale architectural installations, our Brooklyn-based Innovation Lab serves as the hub where design and engineering meet production. We are a small, dynamic team within a larger creative organization, working at the intersection of design, fabrication, and technology. Our environment rewards curiosity, collaboration, and adaptability—ideal for individuals who thrive on variety and hands-on problem solving. Role Overview The Junior Engineer – Digital Signage & Experiential Systems supports the engineering, documentation, and integration of advanced digital signage and AV installations. This role combines hands-on CAD drafting with system design and field coordination, working closely with project managers, designers, and fabrication partners to translate creative concepts into technical realities. The ideal candidate is a detail-oriented, versatile engineer with 1–3 years of experience in the AV or digital signage industry—someone equally comfortable producing drawings at their desk or joining a field team to assist with on-site installation and servicing. Key Responsibilities Technical Design & Drafting * Produce detailed 2D and 3D CAD drawings for digital signage, AV, and experiential installations. * Develop system schematics, mounting details, cable paths, and device layouts in AutoCAD and Revit. * Interpret architectural, structural, and millwork drawings to ensure accurate system integration. * Maintain drawing standards, version control, and documentation for multiple active projects. System Engineering & Field Support * Assist senior engineers with system design, including displays, media players, control systems, and networking. * Support documentation for equipment lists, wiring diagrams, and rack layouts. * Participate in on-site installation, servicing, and system testing as project needs require. * Collaborate with project managers, designers, and technicians during fabrication and integration. Cross-Team Coordination * Interface with millworkers, architects, and other trades to align digital systems with environmental design intent. * Participate in design reviews, coordinate markups, and integrate revisions. * Support as-built documentation and field verification after installations. Qualifications Required: * 1–3 years of experience in CAD drafting or engineering for AV, digital signage, or experiential projects. * Strong proficiency in AutoCAD and Revit for drafting and system documentation. * Familiarity with digital signage systems design, display integration, and signal flow. * Ability to read and interpret architectural and construction drawings. * Strong organizational and communication skills. * Comfortable working both at a desk and in the field, depending on project needs. * Hands-on, flexible, and motivated to learn across disciplines. Preferred: * Experience with an AV consultancy or digital signage integrator. * Understanding of IT/networking fundamentals related to AV systems. * Familiarity with fabrication methods, materials, and architectural coordination. * AVIXA CTS certification or progress toward certification. Why Join Duggal? At Duggal, we push the boundaries of design and technology to create spaces that captivate and inspire. Our Innovation Lab brings together engineers, designers, and technologists to build next-generation digital environments. You’ll be part of a tight-knit, collaborative team that values versatility, precision, and hands-on creativity—where no two days or projects are the same. Join us and help bring visionary digital experiences to life for some of the world’s most exciting brands.

Job DescriptionDescriptionThe Manufacturing Engineering group at Knowles Precision Devices is responsible for process engineering, yield improvement and new process introduction. The Knowles Thin Film Product Line includes RF and microwave components and custom built substrates for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role with project management responsibilities for an experienced engineer in solving complex problems, while providing support to operations through improving yield, improving the flow of parts and implementing new equipment. This is a fast paced position, working on parallel projects that requires time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities • Participate in, organize and run yield improvement projects, relying on knowledge of processes, systems of systems, and LSS methodologies in support of organizational goals, • Work with multi-disciplinary (materials, chemistry, mechanical, RF, electronics) and cross-functional (operations, engineering, QA, CI) teams, • Run equipment, processes and experiments in an operational environment, • Collect and analyze data on yield and process capability, • Update and develop operations documentation (WI/JI) for existing processes and new processes, • Participate in Material Review Board (MRB) and Failure Review Board (FRB) for Root Cause investigations, • 7+ years’ experience supporting manufacturing in process engineering, QA or continuous improvement roles., • 3+ years’ direct experience with semi-conductor or thin film processes such as: Photolithograpy, electrolytic and electroless plating, Sputter, CVD or other vacuum deposition, Plasma etching, or die singulation, • Bachelors of Science in engineering or science, or equivalent experience, • Experience with statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL), • Experience reading and understanding CAD engineering drawings using GD&T, • Experience measuring and validating workmanship to drawing specification, • Experience authoring job instructions and work instructions, • Strong written and verbal communication skills, communicating to both operators and management, • Willingness to train others and work as a member of inter-disciplinary teams, • Leadership or supervisory experience a plus, • Project management experience; certification a plus, • Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Flex PTO and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job DescriptionCompany History From its origins in New York in 2002, rag & bone instantaneously distinguished itself by combining their British heritage with directional, modern design. Today, Marcus Wainwright and David Neville's brand has become synonymous with innately wearable clothing that innovatively melds classic tailoring with an edgy yet understated New York aesthetic. Inspired by a desire to create beautifully constructed clothes, with no formal fashion training, the expats immersed themselves in the time-honored techniques of supremely skilled, local manufacturers at some of the oldest factories in the country. The importance of quality, expert craftsmanship and attention to detail resonated deeply, informing rag & bone's core philosophy. With a downtown sensibility, signature clean silhouettes and an inherent integrity – each piece is impeccably crafted from the finest materials available and approached from a form and function design standpoint – rag & bone continuously redefines urban style. Job Summary: The Technical Developer will be supporting Men’s and Women’s Footwear Design and Production from initial development to commercialization. This position will ensure all styles are developed with consistency, aligned with our rag & bone fit and grading standards. Responsibilities: · • Manage fit and grading specifications, providing technical guidance to Design and factories., • Launch all lasts and constructions, while partnering with Design to balance Fit and aesthetic., • Manage development of new component molds from 1st proto to commercialization. This includes ability to review/critique blueprints, mockups and understanding of the right compounds to use., • Communicate daily with factories and troubleshoot any technical and timing concerns., • Manage fit specifications in tech packs at every stage., • Schedule and lead fit sessions, • Review and request full grading samples from factories as needed., • Evaluate SMS and Production Wear Tests and react to any quality or fit issues., • Create and update seasonal WIP for new lasts, constructions, outsole components., • Work cross functionally with Design, PD, and Production to resolve any quality or fit concerns that may impact critical deadlines., • Provide solutions to team on how to cost engineer product without compromising quality or aesthetic., • Support Production with launching cost exercises with new factories., • Provide solutions on improving commercialization and QC process post Fit approval., • Must have a strong understanding of footwear construction, last making, grading, cut and pattern making., • Must have basic knowledge of performance testing., • Understand the needs of the Wholesale business and importance for a democratic fit to cater all channels of distribution., • Experienced with 3D CAD and digitalizing last designs., • Strong interest in innovation that can support Design process., • Passionate about sustainability and providing eco solutions to our products., • Must be a lateral thinker and able to work under pressure in a fast-paced environment, with a fresh perspective to apply alternative solutions., • Possess knowledge of leather and textiles and how they react/impact footwear fit., • Travel overseas as needed for development and production, • General knowledge of MS Office, PLM experience is a plus Rules we live by | Rules you live by • Be a Good Human - Be original, be authentic. Stand for diversity, equitability & inclusivity., • Have No Fear - Innovate, solve problems, • Own Every Decision - Work together, get results, • Quality Matters – Not only with product but we see it in our people, • Make S**t Happen - Be disciplined, be competitiveBenefits, • Paid Time Off, • Clothing Allowance, • Generous Employee Discount, • Paid Parental Leave, • Membership to Calm and access to other wellness benefits, • Medical, dental, vision and ancillary benefits Powered by JazzHR Vn4WP3jpy3

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . Description: The Senior Process Engineer or Process Engineer II will support and lead manufacturing process development and optimization for our medical device products. This position plays a key role in ensuring that all manufacturing processes meet quality, compliance, and performance standards. The engineer will work closely with cross-functional teams including Quality, R&D, Regulatory, and Production developing, optimizing, and scaling manufacturing processes to improve yield, throughput, quality, and efficiency. The Process Engineer will have a strong operational, quality, and technical background. This is often a hands-on role working closely with the production team to train operators to new processes, troubleshoot equipment challenges, and write and execute qualifications and validations. This is a full-time, on-site position, located in Brooklyn, New York. It is a multi-faceted role in a highly collaborative environment that will require creativity and focused execution in pursuit of maximizing production outputs and creating robust manufacturing processes. Responsibilities: · Design, develop, and optimize manufacturing processes for new and existing medical devices. · Lead process development for new product introductions (NPI), from concept through validation and launch. · Develop and refine manufacturing processes to reduce variation, increase yield, improve cycle times, and reduce cost. · Evaluate and implement automation technologies to improve process consistency and throughput. · Interface with external vendors and suppliers to specify new equipment, product or process requirements, or troubleshoot product issues. · Analyze production data to identify trends, root causes, and opportunities for efficiency. · Maintain and update validation documentation as part of lifecycle management. · Ensure processes comply with applicable regulatory requirements and internal quality standards. · Lead root cause investigations (CAPA, NCRs, SCARs) and implement corrective and preventive actions. · Develop process documentation including standard operating procedures (SOPs), work instructions, pFMEAs, and equipment qualifications. · Partner with R&D during design transfer to ensure design for manufacturability (DFM) and seamless product integration. · Collaborate with Quality and Regulatory teams to support audits, inspections, and compliance initiatives. · Provide technical leadership and mentorship to junior engineers and technicians (for Senior level). · Monitor and analyze key process indicators (KPIs), quality metrics, and manufacturing data · Specify, procure, and validate manufacturing equipment and tooling. · Author and execute process validation protocols (IQ/OQ/PQ) in accordance with FDA and ISO 13485 standards. · Train manufacturing personnel on new or revised processes and equipment. · Provide ongoing floor support for manufacturing operations, helping to resolve technical issues in real time. · Other duties may be assigned as deemed necessary by management Requirements · Bachelor’s degree in Chemical Engineering, Mechanical Engineering, Biomedical Engineering, or related field. · Process Engineer II: 5+ years of experience in a regulated manufacturing environment with 3+ years process development, design, and process implementation required. · Senior Process Engineer: 10+ years of experience in a regulated manufacturing environment with at least 5 years hands-on experience in process development, design, and process implementation required, preferably in medical device, pharmaceutical, or biotech manufacturing. · Understanding of FDA 21 CFR Part 820, ISO 13485, and GMP requirements. · Proven experience with process validation (IQ/OQ/PQ), root cause analysis, and CAPA. · Proven experience in process design, optimization, and troubleshooting. · Experience implementing process and quality improvements into manufacturing or CMO · Strong analytical and problem-solving skills. · Ability to multitask and prioritize work, while remaining detail-oriented. · Demonstrated experience training technical personnel. · Familiarity with data analysis tools and manufacturing software. · Demonstrated ability to design experiments and analyze data with the use of appropriate quality and statistical methodologies. · Experience with Lean Manufacturing, Six Sigma, or similar methodologies. · Hands-on experience with manufacturing processes such as formulation, fill and finish, packaging, and CIP. · Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency in a timely manner. · Demonstrated experience managing third-party vendors and service providers. · Demonstrated ability to work independently as well as be a strong team contributor. · Ability to effectively work within a team and cross-functionally to expedite the completion of critical project tasks. · Excellent verbal and written communication skills required. · Ability to become gowning qualified to work in a cleanroom environment. · Ability to speak, listen, and understand verbal and written communication in English. · Ability to lift 30 pounds of force occasionally and to lift, carry, push, pull, or otherwise move objects. · Strong computer skills, with proficiency in the use of Microsoft Excel, Microsoft Word, Microsoft PowerPoint. · Legal authorization to work in the United States. Preferred Qualifications: · Master’s degree in Engineering or related field. · Experience in medical device or pharmaceutical · 3+ years of relevant cGMP manufacturing experience. · Experience in cleanroom operations, including aseptic processing. · Experience with CMOs. · Significant experience with CAD software · Experience in supporting regulatory inspections and audit readiness. · Six Sigma certification (Green or Black Belt) or Lean Manufacturing experience. · Mechanical/Electrical knowledge with the ability to troubleshoot equipment · Strong leadership skills with the ability to influence and motivate a cross-functional team · Organizational and time management skills with the ability to prioritize a variety of tasks/projects. · Demonstrated understanding of aseptic processing and microbial control concepts. Benefits Competitive annual base salary range of $90,000 - $150,000, depending upon job level and qualifications. · Paid Vacation, Sick, & Holidays · Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage · Company Paid Life and Short-Term Disability Coverage · Work/Life Employee Assistance Program · 401(k) & Roth Retirement Savings Plan with company match up to 5% · Monthly MetroCard Reimbursement Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Structural Engineer (Bridges) Reports to: Vice President - Structural General Qualities • Has excellent communication and writing skills., • Has excellent Microsoft Word and Excel. Ability to navigate through company internet-based systems., • Proactive self-starter capable of setting a positive example for the staff. Technical Responsibilities • Manage multiple building/bridge design projects concurrently, including project planning, scheduling, budgeting, and resource allocation, to ensure timely and successful project delivery within scope and budget constraints., • Utilize advanced structural analysis techniques and software tools to perform complex analyses, optimize designs, and ensure structural integrity, efficiency, and safety., • Serve as the primary point of contact for clients, consulting with them to understand project requirements, goals, and constraints, and providing expert technical advice, presentations, and solutions to address their needs., • Ensure compliance with relevant industry codes, standards, and regulations governing bridge design and construction, including Building & Bridge Design Specifications, and local building codes., • Conduct thorough reviews of design calculations, drawings, and specifications prepared by the team to verify accuracy, consistency, and adherence to best practices and project requirements., • Collaborate with construction teams and contractors during the construction phase to address design-related issues, provide clarifications, and ensure that the construction meets design intent and performance expectations., • Identify potential risks and challenges associated with design projects, develop mitigation strategies, and proactively address issues to minimize project delays and cost overruns., • Stay abreast of emerging trends, technologies, and advancements in building and bridge engineering, structural analysis, and design optimization through professional development, training, and participation in industry conferences and forums., • Drive innovation in design by integrating cutting-edge technologies, materials, and construction methods to enhance performance, sustainability, and cost-effectiveness., • Professional Engineer license in NY or NJ, • A Bachelor’s or Master’s degree from an accredited college/university in Civil Engineering with a focus in structural engineering., • 5 -10 years’ experience in structural design, • Proficiency in structural analysis software (e.g., SAP2000, MIDAS Civil, LARSA) and computer-aided design (CAD) tools (e.g., AutoCAD, MicroStation)., • Knowledgeable with Risa-3D and STAADPro analysis software., • Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams and interact confidently with clients and stakeholders., • Proven track record of delivering high-quality building and bridge designs on time and within budget, with a focus on innovation, sustainability, and client satisfaction. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Senior Plumbing Engineer (MEP) MEP Engineering -Plumbing Engineering- Fire Protection Engineering A multidisciplinary MEP engineering client based in Northern New Jersey is seeking to add a Senior Plumbing Engineer with MEP design experience to join the growing team. This individual will play a key role in the organization designing plumbing systems, collaborating with other disciplines, and ensuring successful project delivery for commercial, industrial, institutional, and healthcare focused projects. Our client offers: • Competitive compensation and performance-based bonuses., • Comprehensive health, dental, and vision insurance., • 401(k) with employer match., • Paid time off, holidays, and flexible scheduling options., • Support for licensure, certifications (ASPE, LEED), and professional development., • Work on impactful, high-profile projects with a collaborative MEP team., • Location: Northern New Jersey (Union County), • Contribute to & oversee the preparation of technical drawings, schematics, specifications of plumbing & fire protection systems., • Design plumbing & fire protection systems for commercial, institutional, healthcare, and mixed-use projects., • Ensure designs comply with applicable codes, standards, and client requirements (IPC, UPC, NFPA, ASPE, etc.)., • Collaborate with project managers, engineers, and CAD/Revit designers to ensure high-quality project deliverables., • Leading project teams and serving as the primary contact with clients, • Performing QA/QC of design work, • Attend meetings with architects, owners, and building managers to discuss future and/or current projects Qualifications: • Bachelor’s degree in Mechanical Engineering or related field, • Approximately seven to ten plus years (~7-10+) of experience in plumbing and mechanical system design within an MEP environment, • PE license preferred (or actively pursuing)., • Proficiency with AutoCAD & Revit, • Knowledge of applicable codes (IPC, ASPE, NFPA, local building codes)., • Strong communication, managing, mentoring and organizational skills., • Ability to manage multiple projects and deadlines in a team-oriented environment., • Proven ability to successfully lead teams and manage projects, • Thorough knowledge of plumbing engineering design, • Excellent ability to read, interpret, and implement plumbing design documentation Alex Showers Liberty Personnel Services #ConsultingEngineering #MidSenior #LI-AS1 Key Words: (Plumbing Engineer, MEP, Mechanical Engineer, Revit, AutoCAD, EIT, PE, Fire Protection Engineer, Professional Engineer, Engineer in Training) Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Electrical Engineering Manager is responsible for overseeing and managing the compliance, development, and implementation of engineering standards, specifically focusing on UL (Underwriters Laboratories) testing and manufacturer test requirements. This role involves ensuring that products meet all necessary safety, regulatory, and industry standards, particularly for electrical and mechanical systems. The manager will work closely with engineering teams, product development, and quality assurance to guide the organization in meeting UL standards and regulatory requirements, ensuring products are certified and safe for use in the market. It is a full-time, exempt position, and the candidate will report directly to the Director of Engineering. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days. · · Oversee the development and implementation of engineering related to UL and manufacturer test requirements (MTR) for electrical and mechanical products. · Ensure all products are compliant with UL standards (e.g., UL 508A, UL 60947) and other regulatory standards applicable to the industry. · Work closely with internal and external stakeholders to stay updated on UL changes, revisions, and new industry standards. · Lead efforts in coordinating product testing and certification with UL or other regulatory bodies to ensure compliance with industry standards. · Manage and track testing schedules and product submissions for UL approvals. · Act as the primary point of contact for testing agencies, ensuring efficient and accurate communication regarding testing and certification requirements. · Collaborate with engineering and product development teams to integrate UL and manufacturer test requirements into the product design phase. · Provide technical guidance and expertise to engineering teams to ensure designs meet all applicable UL standards. · Assist in troubleshooting and resolving issues that arise during testing or certification processes. · Conduct regular audits of product designs, processes, and manufacturing practices to ensure continuous compliance with UL and other regulatory requirements. · Prepare and manage internal and external inspections, ensuring that all products meet safety standards and regulatory guidelines. · Ensure that all documentation related to UL testing, compliance, and certifications is complete, accurate, and maintained for audit purposes. · Work closely with the Quality Assurance, R&D, and Manufacturing teams to ensure product quality and safety across all stages of the product lifecycle. · Educate and train engineering teams on UL MTR requirements and the importance of compliance in the product development process. · Collaborate with the legal and regulatory affairs departments to stay informed about industry regulations and compliance changes. · Monitor industry trends and emerging technologies to ensure the company’s products stay ahead of regulatory changes and market demands. · Identify opportunities to improve internal processes, enhance product safety, and streamline certification procedures. · Implement corrective and preventive actions when issues related to compliance, testing, or certification arise. Requirements: Skills, Requirements, and Specifications · • 10+ years of experience in Electrical engineering, focusing on switchboards, switchgear, or electrical equipment., • 4+ years in a leadership or managerial role, • 4+ years of experience in engineering standards management, UL testing, and product compliance, particularly in the electrical or mechanical industries., • Experience with product safety and regulatory certifications (e.g., UL 508A, UL 60947, IEC)., • Proven track record of working with testing agencies and managing certification processes., • In-depth knowledge of UL standards, testing procedures, and other industry standards such as IEC, ANSI, and NEC., • Strong understanding of electrical and mechanical system design principles and how they relate to safety standards., • Excellent project management, organizational, and documentation skills., • Strong communication and interpersonal skills, with the ability to collaborate with cross-functional teams and external agencies., • Ability to interpret complex technical documentation and standards and translate that into actionable requirements. Experience with CAD tools, product design, and development., • Knowledge of risk assessment techniques and compliance risk management., • Familiarity with ISO standards and other international regulatory requirements., • Experience with electrical product testing (e.g., electrical enclosures, switchgear) and mechanical safety standards., • Primarily office-based with occasional visits to manufacturing facilities and testing laboratories., • Involves regular interaction with engineering teams, product managers, external testing agencies, and regulatory bodies., • May require occasional travel for product testing, certification activities, and industry conferences. Education: • Bachelor or Masters Electrical Engineering Degree, • Professional Engineer (PE) certification is an advantage.

Job Description Design Engineer, Decorative lighting , Bronx, NY Here at HB Architectural Lighting, we manufacture large- and small-scale, custom decorative light fixtures for public spaces, guest rooms, restaurants, places of worship, universities, high-end residences, and more. Based in Bronx, New York, our 30,000 square foot factory is vertically integrated with state-of-the-art, automated, and hand-operated machinery. Our highly skilled team turns conceptual designs into manufacturable products using various manufacturing techniques including CAD drawing, laser cutting, CNC machining, hand-forming metal, welding, polishing, hand finishing, and shade making. The Candidate will be responsible for: • Converting sketches developed by our customers, into a manufacture-able product using AutoCAD and or Solidworks software, • Be able to produce accurate part drawings, Detailed and Bills of Materials in the format established by our company standards, • Work with our Manufacturing team and Project Manager(s) throughout the manufacturing process to ensure the product meets the customer's expectations.