Computer assembly jobs in San Diego, California - Page 2Create job alerts

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Description Job Duties • Operate all equipment. • Stock ingredients from delivery area to storage, work area, walk-in cooler. • Prepare product. • Receive and process telephone orders. • Take inventory and complete associated paperwork. • Clean equipment and facility approximately daily. • Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver’s license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes and other delivery sites while carrying product. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations. Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Automation Technician/Assembler (Temp) - Simply Biotech OVERVIEW Are you looking for a new career opportunity with an exciting biotech company?! Then we have got the right team for you! In this role, you are responsible for the duties listed below. Immediate opening for an Automation Technician/Assembler (Temp) in San Diego, CA who possess: • Highly proficient in operating power tools [drilling and tapping (adding threads to the hole), wrenches, snips, allen keys, zip ties, saw], • Demonstrated experience with roles that require critical thinking and problem solving (assembly of technical components such as automotive, large electrical medical devices, computer build technicians, etc.), • Ability to move, bend down, lay down for assembly, and lift up to 25-40lbs. Email resumes to and call 858.683.8070. FULL DESCRIPTION: The Automation Technician will assemble automation work cells and work on customer engineering projects. This position will assist in shipping and receiving components for projects and the automation engineers with the operational testing of instrumentation on the projects. The selected candidate will be responsible for: • Assemble automation workcells and custom engineering projects., • Configure electrical, pneumatic, and communications on automation workcells and custom engineering projects based on design schematics., • Label and organize all workcell wiring., • Unpack, arrange, level, and secure automation workcell tables., • Mount instrumentation and shelves to workcells., • Assist Shipping/Receiving to keep components organized and the shop clean., • Assist engineering team with operational testing on instrumentation., • Performs all other duties as assigned. The selected candidate will also possess: • High School Diploma., • Relevant trade-skill school degree desirable., • At least 1-2 years of experience with hand-tools (drills, saws, wrenches, etc), including cutting, drilling, and tapping aluminum or similar., • Experience working with extruded aluminum profile (such as 80/20) is preferred., • Experience moving, packing, and installing with laboratory instruments is preferred., • Travel Requirements: Up to 10% Salary Range: $24.00 to $27.00/hour For immediate and confidential consideration, please email your resume to and call 858.683.8070. More information can be found at Company DescriptionSimply Biotech was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices.Simply Biotech was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices.

Job DescriptionCNC Field Service Engineer Established 20+ Years Premier Firm Seeking Field Service Associate for CNC Machine Installation and Repair in Fort Myers, FLAn established company based in Fort Myers with over 20 years in business is seeking a Field Service Associate with 2+ years of technical experience to join their team in an onsite work arrangement. This role will focus on installation, maintenance, and repair of CNC, Lathe, and Mill machines and accessories, ensuring proper assembly, calibration, and functionality while providing exceptional customer service and technical support. Offer: $80,000 - $100,000 Based on experience Health insurance 401(k) with matching Paid time off and holidays Travel reimbursement Flexible schedule for field assignments Qualifications: The candidate must have a high school diploma and preferably a two-year technical training or associate degree in electronics, mechanical systems, or machine tool assembly.The candidate must demonstrate excellent mechanical and electrical aptitude, strong problem-solving skills, and the ability to read and understand engineering drawings.The candidate must have good interpersonal and communication skills, both oral and written, and the ability to work independently or as part of a team.The candidate must be computer literate, capable of lifting up to 50 lbs, and willing to travel, including overnight stays.Prior experience in installing, troubleshooting, and repairing CNC machinery is strongly preferred. Responsibilities: The associate will install CNC, Lathe, and Mill machines and accessories at customer sites, including assembly, leveling, aligning, adjusting, calibrating, and wiring.The associate will diagnose and repair mechanical, electrical, and software issues on machines and accessories and test operations after installation or repair.The associate will train customers on basic machine functions and maintain professional communication regarding status, diagnosis, and parts required.The associate will complete detailed reports in D365 documenting hours, assessments, repairs, and parts installed. The associate will proactively maintain a safe work environment, learn new machine models and features, and communicate daily with the team leader regarding assignment status and estimated completion.Travel is required, with some assignments involving overnight stays. Benefits • Car Allowance, • Paid by the mile, • Travel fully covered the company, • Paid Time Off, • 401k Retirement Plan with Company Match, • Medical and Prescription Drug Coverage, • Health Savings Accounts (HSA), • Flexible Spending Account (FSA), • Dependent Care Account (DCA), • Dental Coverage, • Vision Coverage, • Life Insurance Coverage, • Disability Coverage, • Employee Assistance Program, • Career Growth Programs, • Tuition Reimbursement, • Service Anniversary Awards - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 01/23/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Overview: Join a fast-growing medical diagnostics company on a mission to transform disease detection and monitoring. The team is developing a next-generation point-of-care diagnostic platform that delivers rapid, highly accurate results, enabling better patient outcomes. In this role, you’ll lead firmware development for the core product while guiding other software areas including frontend, backend, and UI. You’ll play a key role in driving the technical direction from prototype through production, ensuring seamless integration across all software components. What You’ll Do: • Lead the design, development, and optimization of firmware for diagnostic devices, • Implement real-time microcontroller firmware and develop supporting software tools for automation and testing, • Troubleshoot hardware/software integration issues, perform board bring-up, and support full product lifecycle releases, • Optimize embedded system components and implement algorithms such as PID control, • Maintain, document, and continuously improve software functionality and reliability, • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, Computer Science, or related field, • 8+ years of experience in embedded software or firmware engineering, • Proficiency in C, Python, C++, and assembly language, • Experience with system-level programming on Linux, Windows, or RTOS environments, • Hands-on experience with microcontrollers or single-board computers, • Knowledge of hardware interfaces, device driver development, and troubleshooting with schematics/test equipment, • Understanding of control systems and algorithms, including PID, • Experience with performance tuning, memory optimization, version control, unit testing, and code reviews, • Strong documentation and communication skills

Job Description As a Mechanical Engineer at Q Microwave, you will be responsible for the mechanical design and integration of advanced RF components, including the packaging of RF boards and components into robust, manufacturable mechanical housings. You will collaborate with cross-functional teams including electrical, RF, manufacturing, and assembly of custom RF hardwarefrom initial concept design to full-rate production. Requirements Key Responsibilities: • Design and develop mechanical enclosures and hardware for RF filters and integrated RF subassemblies., • Integrate CCA (Circuit Card Assemblies), Connectors, and RF board layouts into precision-machined mechanical housings that meet harsh environments RF/mechanical requirements (e.g. hermeticity, vibration, temperatureetc)., • Collaborate with RF and electrical engineering teams to ensure alignment of PCB and mechanical designs., • Utilize CAD tools (e.g., SolidWorks, AutoCAD) for 3D modeling, detailed drawings, and tolerance analyses., • Perform thermal and structural analysis to ensure design robustness in defense and aerospace environments., • Support transition to manufacturing, including documentation, tooling and fixture development, and design-for-manufacturability efforts., • Assist with prototype builds, design reviews, product testing, and root-cause analysis., • Work closely with local manufacturing and supply chain teams to support material selection, process optimization, and production readiness., • Generate and maintain manufacturing drawings, BOMs, and engineering change documentation per Q Microwave and Amphenol standards., • The ability to work independently and proactively resolve work issues or notify supervisors of the resources needed. The ability to coordinate with other employees and work as part of a cross-functional team Minimum: • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or Technical Field, • Three - Five (3-5) years of working in product development, mechanical design, or manufacturing of RF or electronic products., • Experience with mechanical integration of PCBs, RF structures, connectors, and other electrical components., • Proficient in basic office tools including Microsoft Office (Excel, Word,, • PowerPoint) and email platforms, • Proficient in CAD tools such as LabView, AutoCAD, Solidworks or similar 3D CAD software., • Eight (8) to Ten (10+) years experience., • Masters Degree in a Technical Field., • Active Security Clearance or ability to obtain and maintain security clearance., • Familiarity with high-frequency RF performance constraints related to mechanical design (e.g., grounding, shielding, thermal management)., • Familiarity with component selection for high-reliability/aerospace/defense applications., • Excellent technical communication, documentation, and organizational skills., • Flexibility in work schedules and task assignments; some overtime may be required., • Basic computer skills and the ability to read and understand basic English., • Strong organizational skills and attention to detail., • A team player with good communication skills.

Job DescriptionDescription: Senior Design Lead Design SLT (System Level Testing) Bench-Level Printed Circuit Boards for Wafer and Package Level testing of Google Mobile SOC Integrated Circuits (IC) used for Phone Tablets. Design High complex ATE Printed Circuit Boards for Wafer and Package Level testing of Texas Instruments’ Integrated Circuits (IC). Design Evaluation Module (EVM) Printed Circuit Boards for Texas Instruments and Google. Perform Signal Integrity simulation for High-speed Interfaces. Prepare various PCB stack-ups based on new manufacturing technologies using dielectric materials, laser and mechanical drills and HDI technologies using sequential and multi laminations. Generate Bill of Materials (List of Components, Hardware Kit Mechanicals etc. loaded on a PCB) using ‘BOM Generation Tool’. Resolve questions from PCB Fab and Assembly vendors related to PCB Manufacturing. Review RFQ inputs, estimate design effort required, and work with PCB Fab and Assembly partners to arrive at Price and Lead time. Debug issues with hardware and support hardware brought up on the ATE equipment. Use technologies such as Schematic EDA Tools (Orcad, ConceptHDL, and Altium), PCB EDA Tools (Allegro, and Altium), Design Workbench (ADW 17.2, and EDM 17.4), Gerber Verification Tool (CAM 350), Test boards Design Procedure and Specification, EVM Design Procedure Checklist Training, High Speed Design Guidelines and Signal Integrity Basics, ATE Loadboard Checker Program Development, Test Hardware Bring-up and Debug Training, and Ultra Flex Tester guidelines and Specification. Require Bachelor of Science in computer science/engineering, information systems/technology, electrical/electronics/communication engineering, or related field and 5 years’ experience in the job offered, design engineer/lead, product/circuit design engineer, IC design engineer, or related field. 5 years employment experience to include the following experience: Silicon/Consumer hardware validation (semiconductor), Familiarity with Linux OS, Experience with functional test at low (eg: LK) High Level OS (eg: Android), Experience with Python scripting, Automation (Lab Equipment, Handlers, ATE) and Scripting (Data manipulation, parsing, Plotting), Schematic/Layout reading, Board level hardware debugging, Prototyping/Soldering experience, and Python or LabView or VB. Please mail your resume to Tezerakt, LLC., 333 W San Carlos Street, Suite 600, San Jose, CA 95110 Requirements:

Job Description Senior Software Engineer Responsibilities: • Provide technical expertise within the Engineering department to solve difficult software challenges or problems or to bring in new technical capability, • Design, develop, document and test embedded software for space products, • Develop C or assembly code for Bootloaders, BSP, VxWorks 6.9 or 7.0 and future versions, Embedded Linux, RTEMS device drivers, • Able to debug, test, and verify component and board designs through software, • Develop test programs, test plans, and verification plans, • Represent Engineering in technical customer discussions / meetings, • Assist Manufacturing Engineers with technical assistance with production issues, • Able to Develop and Maintain Python based desktop GUI applications to control and monitor Automated Test Equipment (pyvisa, nidaqmx), • Architecture: Facilitate the design of complex products by leading and coordinating engineering teams of varied technical disciplines through clearly documented architectural level design documents. Lead the decision and tradeoff process for issues that cross hardware/software or other technical discipline boundaries., • Design (and Develop): Perform original and innovative software design and distill large-scale designs into architectural elements that facilitate the division of design work to teams of two or more engineers., • Planning: Develop plans, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Innovation: Conceive methods for achieving product requirements and specifications using appropriate software architecture and design techniques. Anticipate possible difficulties and develop alternate methods., • Maintenance: Provide support for maintaining existing products by investigating and resolving defect reports, creating documentation, and creating and releasing new versions of software packages., • Continuous Improvement: Take the initiative to research, develop, propose, evaluate and/or implement new methods, processes, techniques, tools, components, or technology that improve quality, timeliness and/or performance of products or the efficiency or cost effectiveness of PDC’s engineering work. Modify existing SOPs or create new SOPs to implement new processes.Qualifications, • Bachelor's Degree in Computer Science, Computer Engineering, or a related field, Master’s degree is a plus, • 10+ years relevant work experience, • Fluent in C and Python, strong VxWorks, Linux, and Bare Metal embedded background, development of bootloaders, BSP, VxWorks 7, Linux, and RTEMS device drivers test code and scripts, • Familiarity with Buildroot and or Yocto Linux build systems, • Good understanding of NAND FLASH memory file systems, drivers, and implementation, • Skilled in low level hardware code development and debugging. Skilled with debuggers/In-circuit emulators., • Experience and skills in debugging using lab equipment and other tools, • Ability to work in a team setting effectively, • Successfully problem solves and manages conflict, • Has analytical, evaluative, and objective critical thinking skills

Job Description We are currently searching for a qualified and reliable Maintenance Supervisor to lead our maintenance department. As the Maintenance Supervisor, you will be responsible for managing all repair and upkeep operations of our company’s facilities. Your duties will include maintaining machinery, planning repair activities, and developing maintenance procedures. Our ideal candidate will demonstrate a good understanding of maintenance machinery and equipment, as well as outstanding written and verbal communication skills, while overseeing the chlorine and acid filling processes, which requires a strong and diverse technical skill set. The ideal candidate must demonstrate hands-on experience and proficiency in the following core areas: Responsibilities: • Supervise and lead all maintenance processes and operations., • Track expenses and oversee the budget for maintenance., • Maintain all machinery to ensure its at working standards., • Create and implement maintenance procedures., • Conduct regular inspections of the facilities to detect and resolve problems., • Plan and manage all repair and installation activities., • Ensure all department workers adhere to the safety policies and procedures., • Assign repair schedules and evaluate repair cost estimates., • Document and prepare daily progress reports and maintenance logs., • Oversee equipment stock and place orders for new supplies when necessary., • Maintain production chemical manufacturing and product packaging equipment and fixtures to aid production of machined parts, • Conduct mechanical and electrical fabrication, assembly, and integration of manufacturing and packaging equipment, • Maintain, company maintenance software program as well as inventory of parts, • Ensures that all work performed meets required codes (OSHA, City and Federal) and is in accordance with plant policies and procedures., • Responsible for providing coverage in the absence of other Maintenance Technicians., • Be able and willing to work in non-ideal environments such as: confined spaces, working at heights, dusty/dirty and around chemicals., • High School Diploma or equivalent qualification., • Certification or proven experience in Facility Management or similar field is preferred., • A minimum of 5 years’ experience in maintenance, • Preventive Maintenance: Proven experience in implementing and managing preventive maintenance programs to ensure equipment reliability and safety., • Plumbing and High-Pressure Systems: Skilled in the installation, maintenance, and troubleshooting of plumbing systems, including high-pressure pumps and fluid transfer systems., • Electrical Skills: Strong knowledge of both single-phase and three-phase electrical systems, including safe troubleshooting and installation practices., • Electronic Troubleshooting: Ability to diagnose and repair electronic control systems and instrumentation., • Mechanical & Transmission Systems: Understanding of mechanical operations, gearboxes, drive systems, and the ability to perform related repairs., • Conveyor Belt Systems: Skilled in the maintenance, adjustment, and repair of automated conveyor systems used in chemical or industrial environments., • Good understanding of the technical features of plumbing, carpentry, and electrical systems., • Strong knowledge facilities machines and equipment., • Basic understanding of electrical control systems with ability to troubleshoot, diagnose, and repair basic electrical wiring and control circuits, • Physical stamina and strength to lift heavy items, • Background in chemical manufacturing & liquid packaging is preferred with computer skills, • Experience on welding and fabrication., • Hands on experience on preventive maintenance strategies and implementation., • Experience on mechanical systems troubleshooting and repair., • Electrical systems knowledge and expertise., • Welding: Proficient in various welding techniques for fabrication, repair, and structural support. Ability to perform general carpentry work for facility maintenance and equipment housing.

Job Description The Legal Secretary provides high-level administrative and secretarial support to attorneys, ensuring the efficient management of litigation matters from inception through resolution. This position is responsible for drafting, revising, and finalizing complex legal documents; preparing and executing e-filings in state and federal courts and with administrative agencies; maintaining case calendars and tracking critical deadlines; and organizing materials for hearings, trials, arbitrations, and mediations. The role demands exceptional attention to detail, advanced organizational skills, and the ability to manage multiple cases and priorities in a fast-paced law firm environment. The ideal candidate will possess strong knowledge of litigation procedures, court rules, e-filing requirements, and legal terminology, along with professionalism, discretion, and initiative to anticipate the needs of attorneys and clients. Essential Duties and Responsibilities • Prepare, revise, and format legal documents, correspondence, memoranda, and emails from written drafts and transcription, • Handle e-filings and support all stages of the litigation process, from initiation through trial, • Assemble documents and exhibits for court filings, recordings, hearings, arbitrations, mediations, depositions, and other proceedings, • Proofread documents to ensure accuracy, correct grammar, and compliance with Firm formatting standards, • Create and update Tables of Contents (TOC) and Tables of Authorities (TOA), • Schedule and coordinate appointments, meetings, and deadlines for attorneys, • Maintain and monitor attorney calendars, ensuring all critical dates are recorded on the master calendar, • Prepare and process new client/matter intakes per Firm procedures, • Utilize computers, transcription equipment, and legal software to efficiently produce and manage documents, • Arrange travel for attorneys, including hotel, airfare, and ground transportation, • Sort, read, print, and distribute incoming mail and emails to appropriate recipients, • Assist with the creation and assembly of marketing materials such as pitch folders, attorney biographies, and PowerPoint presentations, • Provide backup and overflow coverage to other attorneys and staff as needed, • Maintain confidentiality of all Firm, client, and personnel information, • High School Diploma or equivalent, • Minimum of five years of litigation secretary experience, • Strong writing, editing, and proofreading skills, • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint); familiarity with document management systems such as iManage preferred, • Strong organizational skills with the ability to prioritize workload for multiple attorneys, • Excellent verbal, written, and telephone communication skills to interact professionally with clients, attorneys, vendors, and staff, • Ability to operate standard office equipment, including computers, transcription devices, fax machines, and photocopiers with advanced functions, • Prolonged periods of sitting, with frequent standing and walking throughout the day, • Frequent use of a computer for reading, writing, and document preparation, • Clear verbal communication in both in-person and telephone interactions, • Occasional bending, climbing, and kneeling as needed, • Fine motor coordination for tasks such as writing, typing, using a computer mouse, and operating office equipment, • Availability to work more than 40 hours per week, including overtime when necessary, • Capable of lifting up to 10 pounds Salary Range: $80,000 - $92,000 Annually On-site

Job Description About Company Founded in 2015, Global Air Logistics and Training, Inc. (GALT Aerospace) a rapid innovator, solving the world's critical security challenges to enable warriors to win...decisively. GALT Aerospace subscribes to Col John Boyd's tenet "Wars are won by people, ideas and equipment, IN THAT ORDER." Warfighters need tools (equipment) that are flexible. GALT Aerospace will always satisfy the warfighter with such tools. GALT Aerospace provides simple, effective information capabilities to support all levels of war and drive information to the lowest levels possible, enabling faster decision cycles and decisive results. GALT Aerospace uniquely focuses on architecture solutions, effective open systems integration, and rapid prototyping, fielding, and operations. At GALT Aerospace, employees have incredible opportunities to work on revolutionary and nationally relevant systems. GALT Aerospace looks for people who align with its Core Values: • The Right Thing:, • We work on important things that we are passionate about and will make a difference for the US National Security., • We are ethical and forthright and expect the same from our employees., • We operate with integrity in all things; we do the RIGHT THING., • Trust and Respect:, • We always strive to earn and foster trust., • We Act and communicate with respect., • We foster mutually beneficial relationships., • Add Value:, • We take ownership of our tasks and deliver results to our customers, partners and each other., • We champion individual expertise, creativity, and accomplishments., • We recognize that collaborative teams achieve even greater results. Job Location San Diego, CA (Onsite with possible occasional/part-time telecommuting) Minimal domestic travel required, possibly 10% of time. Job Description GALT Aerospace is seeking a full-time, salaried Mechanical Engineer to perform Mechanical Systems Design related to Communication Mission Payload System Development and Installation Design onto the Platform. At GALT Aerospace, Mechanical Engineers are responsible for collaborative, complex designs of structural, thermal management, and size, weight, and power (SWAP)-constrained systems for airborne, ground-based mobile, and shipborne military command, control, and communication systems. This individual would act as a responsible design engineer (RDE) on Mechanical hardware for multiple systems and programs. The candidate will be responsible for all Mechanical hardware development including: • Mechanical System design,, • Structural and Thermal analysis,, • Detailed Mechanical System Installation design onto SWaP constrained platforms,, • Performing customer briefings/reviews, hardware test, site integration, and post-delivery support. The candidate will work closely with other engineering functions in a team environment to meet schedule and technical performance requirements including: • Flight Engineering, • Systems Engineering, • Product Engineering, • Software Engineering, • Production, • Procurement, • Program Management The ideal candidate has a broad range of experience with many of the following: • System and Platform level Mechanical design, development, test, and integration, • Support Rapid Prototyping, I&T, and Demonstration of Complex Integrated Systems., • Work within a small cross-functional team to ensure creative solutions to novel problems, • Ability and desire to guide/mentor junior engineers, • Specify components and work directly with specialty suppliers and sub-contractors, • Compose and present design reviews for internal and external customers, • Develop TDP (Tech Data) and performance data packages Required Skills, Experience, and Education • Bachelor's degree in mechanical engineering or related STEM degree from an accredited institution, • 3+ years of experience in a related Engineering Environment, • Military and/or Aircraft related Mechanical System Design and I&T experience, • U.S. Citizenship required, • Ability to obtain and maintain a Department of Defense (DoD) personnel security clearance required Preferred Skills, Experience and Education • Familiar with the mechanical design process: CAD, analysis, drawings, • Solidworks, • Thermal/ heat transfer analysis, • Structural analysis, • CFD analysis, • Design for manufacturing, • Experience taking the product from design to production and assembly, • Strong analytical skills, • Familiar with aircraft and aircraft structures, • Familiarity with Military and Airborne systems., • Design and test experience in comm systems / RF technology, • Airborne Wiring, Cabling, and routing with knowledge of EMI-EMC ramifications, • Excellent written and verbal communication skills, • Advanced studies / Degree in a STEM area, • Active DOD Secret, TS/SCI, or SSBI clearance Physical Requirements • Must be able to sit or stand for 1 hour at a time, • Must be able to operate a computer Pay Scale At GALT Aerospace, base pay is one part of the total compensation package and is determined within a range. This provides the opportunity to progress as one grows and develops within a role. The base pay range for this role is between $102,000-$145,000, and a specific candidate's base pay will depend on their skills, qualifications, experience, and location. Job Posted by ApplicantPro

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for Cardiovascular Technologists (CVT) to work with us in support of the VA San Diego Healthcare System, located at 3350 La Jolla Village Drive, San Diego, CA 92161. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Position Pays: $53-$65/hr Schedule Will be expected to be available 24/7, including holidays and shall participate in call coverage a minimum of two weeks per month. The normal tour of duty is an 8-hour day and 40 hours per week. Shall be available to work Monday through Friday from 7:30 AM to 4:00 PM. CVT's shall have an estimated on-call amount of up to 100 hours per month, 200 hours per contract year, to be covered and rotated between the pool of Cardiovascular Technologists. This number is variable dependent on the procedural volume of the Catheterization and Electrophysiology Labs. Responsibilities • Shall function as the first assistant to the Cardiologist during the cardiovascular procedure., • Perform a wide range of diagnostic tests and support duties such as the collection of blood samples for analysis for research, coagulation studies and blood gas determination., • Operate radiologic fluoroscopy equipment to allow the medical team to appropriately visualize images during the procedure, assists/performs testing such as electrocardiograms (ECG), Intravascular Ultrasound (IVUS) echocardiograms, Intracoronary Pressure Wire, Drug exercise challenges, and the administration of Dynamic Electrocardiograph (EKG’s) analysis., • Monitor cardiac rhythms and recognize abnormal and life-threatening rhythms., • Perform other monitoring procedures such as oximetry, blood pressure, arterial monitoring, intracardiac monitoring and can recognize abnormal readings., • Perform patient care procedures such as applying dressings, and collection of specimens or blood samples for analysis., • Shall be scrubbed and gowned, and shall be responsible for preparing catheters, guide wires, transducers, angioplasty balloons, stents, and manifold assembly. The CVT shall operate the angiographic pressure injector to control the rate of pressure development and limits the onset of ejection to minimize ventricular irritability during the procedure., • May also function in the nonsterile, role (circulator) by preparing the vascular access site on the patient, positioning the patient, operating the electric exam table and radiologic equipment, opening sterile supplies and monitoring patient physiologic response to the procedure. During cardiac arrest the CVT shall operate the defibrillator and initiate CPR to restore the patient to a normal cardiac rhythm., • Set up the Procedure Suite, ensuring sterile supplies and other required equipment are carefully selected and properly presented as determined by the procedure being performed., • Set up Mac Lab and the GE Innova x-ray computers, perform quality checks to ensure readiness for use during the procedure, set up the GE x-ray diagnostic system (angio/fluoroscopic) so that appropriate views of cardiac anatomy can be obtained and recorded for analysis, and perform a check of lead shielding equipment in compliance with National Standards (Joint Commission on Accreditation of Healthcare Organizations (JCAHO)), Occupational Safety and Health Administration (OSHA) and Radiation Exposure – as low as is reasonably achievable (ALARA)., • Prepare the various computer software and peripheral devices (disk and magnetic tape drives and video formatters) to quantify coronary lesions and to generate ventricular analysis reports, cardiac output (thermodilution, Fick determinations), and maintains logs of patient data and library of videotapes and hardcopy tracings., • Perform daily calibration of equipment, prepare physiologic monitoring equipment such as ECG, Oximetry, Intra-Aortic Balloon Pump (IABP), balloon catheters, code cart, Intravascular ultrasound, Fick cardiac output device, Therapeutic Pressure wire, defibrillator, and various other complex equipment., • Perform quality checks for various lab analysis equipment such as blood gas, coagulation studies that are used throughout the procedure, and ensures that emergency medication is available in the suite, performing quality checks to verify outdates and competency of like containers to ensure sterility and correct medication dosage. The CVT shall also perform a quality assessment of the 35mm cine film processor, daily, validating sensitometer exposures and ensuring correct parameters are used., • Coordinate the scheduling of patients., • Generate reports and keep records. The CVT shall review test results with the interpreting physician., • Be familiar with the use of an electronic medical record to obtain scheduling information, patient exam notes and results, etc. They shall be familiar with the use of other simple computer-based data entry forms for recording preliminary data from each recorded examination., • Perform elementary preventative maintenance of laboratory equipment and coordinate emergency and preventive services with Biomedical Engineering and outside service companies., • Shall recognize normal anatomy and functional anatomy in diseased conditions and shall have knowledge and clear understanding of the coronary arteries and cardiac chamber anomalies as well as pressure requirements of the heart to anticipate and set up for the specific catheterization procedure needed to make a diagnostic evaluation. The CVT shall have knowledge and understanding of electrocardiography (EKG), how to perform the procedure accurately; understanding of abnormal cardiac rhythm during catheterization so that proper therapy be initiated., • US Citizen, • Minimum Education – Completion of an accredited Cardiovascular Technologist Program (CVT) or Certified Radiologic Technologist Program (CRT), • Minimum Experience – 3 years hospital experience (excluding training), • Required Certification – Registered Cardiovascular Invasive Specialist (RCIS); or Certified Cardiovascular Technologist (CVT); or Certified Radiologic Technologist (CRT), • State Licensure - CRT Board of Health California or Cardiovascular Credentialing International (CCI) for Registered Cardiovascular Invasive Specialist (RCIS), • American Heart Association BLS, • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR mCKKU7AADO

Job DescriptionCompany Description International SOS Government Medical Services, Inc. delivers customized medical and security risk management and wellbeing solutions to enable our clients to operate safely and effectively in environments far from home. Founded in 1984, we operate in 92 countries providing integrated medical solutions to organizations with international operations. Our innovative technology and medical and security expertise focus on prevention, offering real-time, actionable insights and on-the-ground quality delivery. We provide clinical services to include “hands on” direct care at over 800 sites around the world, many of which include inpatient clinical care capabilities. With 12,000 staff (including 5,200 medical and behavioral health providers) our services include the design, deployment, and operation of healthcare solutions including freestanding surgical facilities in remote and austere environments, telemedicine consultation through a wide range of virtual modalities, referrals to a global network of more than 100,000 vetted providers, and global aeromedical evacuation. Within our portfolio of companies, International SOS Government Medical Services, Inc., headquartered in Houston, Texas provides contracted healthcare support to Government defense and civil agencies and government contractors, including support to military exercises and operations, diplomatic missions, natural disasters, and refugee care. To protect your workforce, we are at your fingertips: internationalsos.com Job Description This position is contingent upon award This position will support the US Department of Veterans Affairs Critical Staffing Program. The person in this position will represent International SOS Government Medical Serivces, Inc. and provide services outlined below: International SOS Government Medical Serivces, Inc. is looking for individuals who hold qualifications as a Cardiovascular Technologist to perform support services in the Cardiac Catheterization and Electrophysiology Lab at the VA San Diego Healthcare System (VASDHS). Key Responsibilities: • Participate in diagnostic and interventional catheterization procedures including coronary angiograms, coronary angioplasty, coronary arteriography, left and right ventricular angiography, ventricular biopsy, thrombolytic procedures, electrophysiology catheter ablation, aortic balloon pump counter-pulsation, post coronary bypass graft studies and Pacemaker/Automatic Implantable Cardioverter-Defibrillator (AICD) implantation., • Function as the first assistant to the Cardiologist during the cardiovascular procedure., • Perform a wide range of diagnostic tests and support duties such as the collection of blood samples for analysis for research, coagulation studies and blood gas determination., • Operate radiologic fluoroscopy equipment to allow the medical team to appropriately visualize images during the procedure, assists/performs testing such as electrocardiograms (ECG), Intravascular Ultrasound (IVUS) echocardiograms, Intracoronary Pressure Wire, Drug exercise challenges, and the administration of Dynamic Electrocardiograph (EKG’s) analysis., • Monitor cardiac rhythms and recognize abnormal and life-threatening rhythms., • Perform other monitoring procedures such as oximetry, blood pressure, arterial monitoring, intracardiac monitoring and can recognize abnormal readings., • Conduct patient care procedures such as applying dressings, and collection of specimens or blood samples for analysis., • Be responsible for preparing catheters, guide wires, transducers, angioplasty balloons, stents, and manifold assembly., • Operate the angiographic pressure injector to control the rate of pressure development and limits the onset of ejection to minimize ventricular irritability during the procedure., • Function in the nonsterile role (circulator) by preparing the vascular access site on the patient, positioning the patient, operating the electric exam table and radiologic equipment, opening sterile supplies and monitoring patient physiological response to the procedure., • Operate the defibrillator and initiate CPR to restore the patient to a normal cardiac rhythm during a cardiac arrest., • Organize the Procedure Suite, ensuring sterile supplies and other required equipment are carefully selected and properly presented as determined by the procedure being performed., • Set up Mac Lab and the GE Innova x-ray computers, perform quality checks to ensure readiness for use during the procedure, set up the GE x-ray diagnostic system (angio/fluoroscopic) so that appropriate views of cardiac anatomy can be obtained and recorded for analysis, and perform a check of lead shielding equipment in compliance with National Standards (Joint Commission on Accreditation of Healthcare Organizations (JCAHO)), Occupational Safety and Health Administration (OSHA) and Radiation Exposure – as low as is reasonably achievable (ALARA)., • Prepare the various computer software and peripheral devices (disk and magnetic tape drives and video formatters) to quantify coronary lesions and to generate ventricular analysis reports, cardiac output (thermodilution, Fick determinations), and maintains logs of patient data and library of videotapes and hardcopy tracings., • Performs daily calibration of equipment, prepare physiologic monitoring equipment such as ECG, Oximetry, Intra-Aortic Balloon Pump (IABP), balloon catheters, code cart, Intravascular ultrasound, Fick cardiac output device, Therapeutic Pressure wire, defibrillator, and various other complex equipment., • Execute quality checks for various lab analysis equipment such as blood gas, coagulation studies that are used throughout the procedure, and ensures that emergency medication is available in the suite, performing quality checks to verify outdates and competency of like containers to ensure sterility and correct medication dosage., • Conduct a quality assessment of the 35mm cine film processor daily, validating sensitometer exposures and ensuring correct parameters are used., • Coordinate the scheduling of patients., • Generate reports and keep records., • Review test results with the interpreting physician., • Be familiar with the use of an electronic medical record to obtain scheduling information, patient exam notes and results and with the use of other simple computer-based data entry forms for recording preliminary data from each recorded examination., • Perform elementary preventative maintenance of laboratory equipment and coordinate emergency and preventive services with Biomedical Engineering and outside service companies., • Recognize normal anatomy and functional anatomy in diseased conditions and shall have knowledge and clear understanding of the coronary arteries and cardiac chamber anomalies as well as pressure requirements of the heart to anticipate and set up for the specific catheterization procedure needed to make a diagnostic evaluation., • Knowledge and understanding of electrocardiography (EKG), how to perform the procedure accurately; understanding of abnormal cardiac rhythm during catheterization so that proper therapy is initiated., • Provide for the psychosocial needs of patients and their families; including explaining procedures to patients to reduce anxieties and gain cooperation., • Recognizing life threatening situations and initiating appropriate emergency resuscitation measures. Basic Requirements/Certifications: • Must have a Registered Cardiovascular Invasive Specialist (RCIS) or a Registered Cardiac Electrophysiology Specialist (RCES) certification., • Minimum of 2 years’ experience in a cardiac catheterization laboratory in a hospital. Services performed a minimum of six (6) months within the past 12 months., • Must have completed an accredited Cardiovascular Technologist Program (CVT) or Certified Radiologic Technologist Program (CRT)., • Must be a Registered Cardiovascular Invasive Specialist (RCIS); Certified Cardiovascular Technologist (CVT); OR Certified Radiologic Technologist (CRT)., • Certified through the California Board of Health or Cardiovascular Credentialing International (CCI)., • Current Basic Life Support (BLS) certification., • Work involves sitting and standing for prolonged periods of time., • US Citizen., • Must relocate to project site for the duration of the contract., • Pass/possess VA Public Trust Clearance. Additional Information Pay range is based on several factors and may vary in addition to a full range of medical, financial, and/or other benefits. Final salary and offer will be determined by the applicant’s background, experience, skills, internal equity, and alignment with geographical market data. Benefits – Full-time positions are eligible for our comprehensive and competitive benefits package including medical, dental, vision, and basic life insurance. Additional benefits include a 401k plan paid time off and an annual bonus. International SOS Government Medical Services, Inc. complies with all federal, state, and local minimum wage laws. International SOS Government Medical Services, Inc. is an equal opportunity employer and does not discriminate against employees or job applicants on the basis of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with the applicable federal, state and local laws.

Job DescriptionTHOR Solutions is actively seeking a Mid-Level Aircraft Support Analyst to support the US Navy Ship Anti-Submarine Warfare (ASW) Readiness and Effectiveness Measuring (SHAREM) at Surface and Mine Warfighting Development Center (SMWDC) in San Diego, CA. This position is associated with an upcoming contract that THOR is pursuing, with an estimated award/work start late 2025. We are conducting preliminary, “contingent” hiring for roles associated with this contract. The work start is dependent upon THOR being awarded this contract. Typical Responsibilities: • Observes and collects required data/logs from aircraft participating in exercises, • Uses pertinent data to reconstruct aircraft engagements during exercises, • Assesses the performance of airborne detection systems based on exercise data, • Coordinates the assembly, installation, interfacing, removal and system restoration, repair, and testing of tracking equipment used during exercises, • Interprets schematics and resolves issues associated with the installation, removal, interfacing, repair, modification and testing of tracking equipment used during exercises Travel Requirements: Up to 20% travel is anticipated to include CONUS and OCONUS locations. Typical Physical Activity: Primarily desk/computer work in an office environment. Periodic visits to waterfront/shipboard environments. May involve: repetitive motion, traversing shipboard environments (e.g., confined spaces, ladders, hatches), speaking or vision. Typical Pay Range: The anticipated pay range for this position in the identified location(s) is $78,750 - $110,250/year. Actual compensation offered will be based upon individual factors including education, qualifications, and experience. Existing Security Clearance Required: This position requires a DoD Secret security clearance. A qualified candidate must already possess an active or interim security clearance. A candidate with especially strong, relevant experience but no active security clearance may still be considered, but work start would be dependent upon a new Secret clearance being awarded. Typical Knowledge, Skills, and Abilities: • High School diploma, GED, or equivalent, • Ten (10) years of U.S. Navy experience relating to Undersea Warfare (USW) aircraft operations and warfare tasks., • Three (3) years of experience planning exercise activities including Navy fixed and rotary wing aircraft., • Experience in briefing and debriefing aircrews on exercise event plans and mission results., • Experience in Navy aircraft data collection, mission data extraction, and post mission analysis., • Capability for preparation of briefings, reports, and correspondence that are technically correct., • Proficient with common productivity software, including the Microsoft Office suite., • Paid Time Off (accrued), • Paid Holidays, • 401(k) with employer match and traditional/Roth options, • Medical Insurance (3 plan options) + TRICARE Supplemental Coverage, • Dental Insurance (2 plan options), • Vision Insurance Plan, • Healthcare and Dependent Care Flexible Spending Accounts, • Commuter/Transit Benefits, • Basic Life/AD&D, Short-Term and Long-Term Disability Insurance, • Supplemental Life Insurance, • Pet Benefits, • Legal Resources, • ID Theft Benefits, • Employee Assistant Plan and Work-Life Program, • Voluntary Leave Transfer Program, • Tuition Reimbursement Program Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran’s Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation’s most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at or (571) 215-0077. Powered by JazzHR Ql82eiq76d

Job DescriptionTHOR Solutions is actively seeking a Mid-Level Submarine Operations Analyst to support the US Navy Ship Anti-Submarine Warfare (ASW) Readiness and Effectiveness Measuring (SHAREM) at Surface and Mine Warfighting Development Center (SMWDC) in San Diego, CA. Typical Responsibilities: • Generates plans that effectively and safely employ submarines in exercises, • Validates submarine tactics for exercise scenarios, • Observes and collects data/logs of submarines participating in exercises, • Uses pertinent data to reconstruct submarine tracks and tactical actions, • Assesses the performance of submarine sensors, systems, weapons and countermeasures as they relate to specific objectives to be analyzed during exercises, • Coordinates the assembly, installation, interfacing, removal and system restoration, repair, and testing of tracking equipment used during exercises, • Interprets schematics and resolves issues associated with the installation, removal, interfacing, repair, modification and testing of tracking equipment used during exercises Travel Requirements: Up to 20% travel is anticipated to include CONUS and OCONUS locations. Typical Physical Activity: Primarily desk/computer work in an office environment. Periodic visits to waterfront/shipboard environments. May involve: repetitive motion, traversing shipboard environments (e.g., confined spaces, ladders, hatches), speaking or vision. Typical Pay Range: The anticipated pay range for this position in the identified location(s) is $78,750 - $110,250/year. Actual compensation offered will be based upon individual factors including education, qualifications, and experience. Existing Security Clearance Required: This position requires a DoD Secret security clearance. A qualified candidate must already possess an active or interim security clearance. A candidate with especially strong, relevant experience but no active security clearance may still be considered, but work start would be dependent upon a new Secret clearance being awarded. Typical Knowledge, Skills, and Abilities: • High School diploma, GED, or equivalent, • Ten (10) years of U.S. Navy experience relating to submarine operations and warfare tasks., • Three (3) years of experience planning exercise activities including submarines., • Experience in briefing and debriefing submarine crews on exercise event plans and mission results., • Experience in Navy submarine data collection, mission data extraction, and post mission analysis., • Capability for preparation of briefings, reports, and correspondence that are technically correct., • Proficient with common productivity software, including the Microsoft Office suite., • Paid Time Off (accrued), • Paid Holidays, • 401(k) with employer match and traditional/Roth options, • Medical Insurance (3 plan options) + TRICARE Supplemental Coverage, • Dental Insurance (2 plan options), • Vision Insurance Plan, • Healthcare and Dependent Care Flexible Spending Accounts, • Commuter/Transit Benefits, • Basic Life/AD&D, Short-Term and Long-Term Disability Insurance, • Supplemental Life Insurance, • Pet Benefits, • Legal Resources, • ID Theft Benefits, • Employee Assistant Plan and Work-Life Program, • Voluntary Leave Transfer Program, • Tuition Reimbursement Program Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran’s Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation’s most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at or (571) 215-0077. Powered by JazzHR laoqyXOc5A

Job Description Key Responsibilities • Follow all safety regulations and use required PPE., • Assemble components into final configured products using process instructions, engineering drawings, work orders, fixtures, and hand tools., • Read and interpret assembly drawings, parts lists, operation sheets, and visual aids; recommend process improvements., • Perform rework from test failures following standard repair procedures; incorporate ECNs as needed., • Prep, insert, hand-solder, touch up, and rework electronic components on circuit boards., • Inspect products at required intervals and verify accuracy and quality., • Provide training and support to lower-level assemblers as needed., • Operate material-handling equipment and set up/operate assigned machines and tools., • Meet established productivity and quality standards., • Follow lead instructions when building units., • Perform additional duties as assigned. Minimum Qualifications • 3–5 years of related assembly experience., • High school diploma or equivalent., • Strong blueprint reading skills., • Proficiency with hand tools (torque wrench, drills, inspection tools)., • Ability to use measuring devices (rulers, tape measures, scales)., • Effective communication skills., • Basic computer skills., • Must be legally authorized to work in the U.S. and access export-controlled information. Desired Qualifications • IPC-610 and J-STD-001 certifications., • Proficiency in MS Word and Excel. Work Environment • Requires close, distance, color, peripheral, and depth vision with ability to adjust focus., • Ability to lift up to 25 lbs.

Job Description STR is hiring a Senior Software Reverse Engineer who has a passion for research and analysis of vulnerabilities in cyber physical systems. Work must be performed onsite. What you'll do: • Reverse engineering complex software or firmware targets, ranging from typical Windows/Linux binaries to embedded firmware running non-traditional computer architectures and operating systems, • Developing and applying automated reverse engineering and binary analysis tools to characterize protocols, interfaces, and functionality of target systems, • Developing innovative cybersecurity solutions, • Working in multi-discipline teams to tackle challenging problems from a wide variety of technologies to develop innovative cybersecurity solutions, • Performing vulnerability weaponization, exploit development, payload development, and exploit mitigation on a variety of challenging targets, • Documenting, demonstrating, and presenting research, • This position requires an Active Top Secret (TS) security clearance, for which U.S. citizenship is needed by the U.S. Government, • Experience with binary analysis of software/firmware, • Experience with disassembly tools, such as IDA Pro, Binary Ninja, or Ghidra, • Proficiency in one or more programming languages: C/C++, Python, etc., • Proficiency in one or more Assembly Languages: x86, ARM, etc., • Vulnerability research and analysis, • Knowledge of weaponizing discovered vulnerabilities into exploits, • Implant or software patch development, • Familiarity with binary emulation or vulnerability research, including tools such as QEMU or AFL++, • Experience with DSP architectures, such as Texas Instruments, STMicroelectronics, NXP, or Analog Devices., • Knowledge of operating system internals including memory/process/thread management, • Embedded systems or firmware analysis, • Experience development custom emulation tools to enable dynamic analysis, • Disassembler/decompiler module development, • Experience analyzing and reconstructing code/data flow, • Automated reverse engineering or software analysis tool development, • Experience debugging software without source code, • Knowledge of binary file structures and formats, • Experience analyzing protocols or message structures, • Knowledge of anti-reverse engineering techniques, • Knowledge of intrusion detection and anti-malware systems and techniques Pay Information Full-Time Salary Range: $134,000 - $184,000 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description Electronic Assemblers Perform routine electronic and mechanical assembly at the unit and module level using blueprints, work instructions, and diagrams. Assemble and inspect components, perform rework, and ensure products meet quality standards. Responsibilities: • Follow safety procedures and PPE requirements, • Assemble components using drawings, wire lists, and hand tools, • Read/interpret assembly documentation and suggest process improvements, • Perform rework and incorporate engineering changes, • Solder, touch up, and rework circuit boards, • Verify product quality and documentation accuracy, • 3–5 years assembly experience, • High school diploma or equivalent, • Strong blueprint reading and measurement skills, • Proficient with hand tools and basic computer skills, • Effective communication skills, • IPC-610 and/or J-STD-001 certification, • MS Word/Excel proficiency, • Apply email resume contact Anne Marie Roberts 858-366-4104

Job Description Now Hiring: Production Assembler Electro-Mechanical Assembly Are you a detail-oriented individual with hands-on experience in cable and wire harness assembly? We’re looking for a skilled Production Assembler to join our team and play a key role in building high-quality electronic components from start to finish. What You’ll Do: As a Production Assembler, you’ll work under indirect supervision to complete a variety of assembly tasks. You’ll read and follow work orders, production documentation, and verbal instructions while performing tasks such as: * Cable and wire harness assembly * Box builds and kitting * Soldering, crimping, labeling, and testing * Continuity testing and pin extraction * Support continuous improvement and quality standards What We’re Looking For: * 1–2 years of electro-mechanical assembly experience * High school diploma or equivalent * Knowledge of IPC 610/620 and J-STD-001 (certification a plus) * Strong hand-eye coordination and ability to work with microscopes and small tools * Comfortable reading blueprints and wiring diagrams * Basic computer skills and accurate measurement ability * Ability to distinguish color codes and use hand tools effectively Physical Requirements: * Ability to lift up to 25 lbs. occasionally * Manual dexterity and prolonged sitting at a workbench * Close vision required for precision work

Job Description To continue to meet our customer's mission critical needs, we are seeking a Senior Software Engineer to join our respected and valued team in our Poway, California office. This position requires a U.S Person or a person who can qualify for a Department of State or Commerce license. This role is 100% onsite in our Poway California Office. The compensation for this role is $160,000 - $180,000 annually. Essential Functions: • Provide technical expertise within the Engineering department to solve difficult software challenges or problems or to bring in new technical capability, • Design, develop, document and test embedded software for space products, • Develop C or assembly code for Bootloaders, BSP, VxWorks 6.9 or 7.0 and future versions, Embedded Linux, RTEMS device drivers, • Able to debug, test, and verify component and board designs through software, • Develop test programs, test plans, and verification plans, • Represent Engineering in technical customer discussions / meetings, • Assist Manufacturing Engineers with technical assistance with production issues, • Product Specifications: Implement innovative approaches and develop clearly written design specifications that ensure our products are designed to succeed in the market relative to their technical performance, feature set, cost and time to market goals., • Architecture: Facilitate the design of complex products by leading and coordinating engineering teams of varied technical disciplines through clearly documented architectural level design documents. Lead the decision and tradeoff process for issues that cross hardware/software or other technical discipline boundaries., • Design (and Develop): Perform original and innovative software design and distill large-scale designs into architectural elements that facilitate the division of design work to teams of two or more engineers., • Planning: Develop plans, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Innovation: Conceive methods for achieving product requirements and specifications using appropriate software architecture and design techniques. Anticipate possible difficulties and develop alternate methods., • Maintenance: Provide support for maintaining existing products by investigating and resolving defect reports, creating documentation, and creating and releasing new versions of software packages., • Fluent in C and Python, strong VxWorks, Linux, and Bare Metal embedded background, development of bootloaders, BSP, VxWorks 7, Linux, and RTEMS device drivers test code and scripts, • Familiarity with Buildroot and or Yocto Linux build systems, • Good understanding of NAND FLASH memory file systems, drivers, and implementation, • Skilled in low level hardware code development and debugging. Skilled with debuggers/In-circuit emulators., • Experience and skills in debugging using lab equipment and other tools, • Ability to work in a team setting effectively, • Successfully problem solves and manages conflict, • Bachelor's Degree in Computer Science, Computer Engineering, or a related field, Master's degree is a plus, • 10+ years relevant workCompany DescriptionCalTek is a manufacturing, technical, engineering and IT consulting firm that has expanded its business operations from its headquarters in San Diego, throughout all of California and into Arizona, Colorado, Florida, Georgia, Texas and Washington. CalTek has staffed positions with global companies such as Siemens, Parsons, and Illumina but also works with startups with 10+ employees.CalTek is a manufacturing, technical, engineering and IT consulting firm that has expanded its business operations from its headquarters in San Diego, throughout all of California and into Arizona, Colorado, Florida, Georgia, Texas and Washington. CalTek has staffed positions with global companies such as Siemens, Parsons, and Illumina but also works with startups with 10+ employees.

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! Leidos’ Defense Systems Space Sensing is seeking an Assembly, Integration and Test Technician to join our team in San Diego, California. The ideal candidate will thrive in learning environments that encourage leadership and technical growth. If this sounds like the kind of environment where you can thrive, keep reading! Leidos Defense Systems Sector / Manufacturing provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world’s toughest security challenges for customers with “can’t fail” missions. Are you ready to make an impact? Share your resume with us today! Primary Responsibilities. • Perform mechanical and structural assembly of aerospace components per work instructions, blueprints, and engineering drawings., • Use hand tools, power tools, precision measuring instruments, and test equipment to assemble, fit, and install parts and components., • Conduct inspections of in-process and completed assemblies to ensure compliance with specifications and quality standards., • Prepare and apply surface coatings (e.g., primers, sealants, bonding agents) according to engineering documentation and process specifications (preferred)., • Fast-paced, collaborative manufacturing setting., • May require standing for long periods, lifting up to 50 lbs, and wearing PPE., • High school diploma/GED, • Ability to read and interpret technical drawings, engineering documents, and assembly instructions., • Proficient in using measurement tools (calipers, micrometers, height gauges)., • Strong mechanical aptitude and hand-eye coordination., • Basic computer skills and familiarity with ERP/shop floor systems., • Must be able to work overtime, including weekends and second or third shift as required., • Associate degree or vocational training in manufacturing, aerospace, or mechanical technology preferred., • Experience in aerospace coatings, including surface prep, masking, application of primers/sealants, or anti-corrosion treatments., • Familiarity with AS9100, ISO 9001 quality systems, or NADCAP requirements., • Certifications in aerospace manufacturing or coatings (e.g., NACE, SSPC, AWS) a plus., • Prior work in a cleanroom or high-reliability manufacturing environment., • Current and active DoD Secret clearance. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. December 11, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $41,600.00 - $75,200.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description Job Title: Soldering Technician Summary: Assembles cable and wire harness assemblies, box builds, kitting and other productscompletely from start to finish by performing the following tasks and duties under indirect supervision. Essential Duties and Responsibilities: • Reads work orders, follows production documentation and/or sample assemblies, and/or receivesverbal instructions regarding duties to be performed., • Performs the following tasks: labeling, wire cutting, stuffing, crimping, bag and tag, soldering,potting, IDC, SCSI, heat shrink, pc board soldering, backshelling, harnessing, harness boardconstruction, box builds, kitting, create wire lists, "special projects", continuity testing, and pinextraction., • Assist in the QMS and the commitment for continuous improvement. Knowledge/Skills • Knowledge IPC 610/ 620, J-STD-001 certification preferred, • Must have good hand/eye coordination and the ability to use microscopes, • Attention to detail/ must be able to read and interpret blueprints, • For color coding purposes, must distinguish colors., • Ability to use hand tools- long nose pliers, side cutter, and soldering iron., • Capable of following both verbal and written instructions, • Ability to compute measurements accurately Education/Experience • High School Diploma or equivalent manufacturing work related experience, • 1-2 years experience in electro- mechanical assembly, • Basic Computer skills required Physical Demands: The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required bythis job include Close vision. While performing the duties of this Job, the employee is regularly requiredto use have good manual dexterity and prolonged sitting in the work station You should be proficient in: • Electrical Schematics, • Soldering, • Electrical / Electronic Systems, • Tape Measure Reading, • Industrial Electrical Experience, • Mechanical Assembly Skills, • High School / GED, • Shop Math Skills, • Blueprint Reading

Job DescriptionDUTIES AND RESPONSIBILITIES The Technical Writer’s role is a unique position that identifies and assesses issues with technical documentation and develops specifications, plans, drawings, standards, purchase descriptions and other data required to define a design and to produce, support, maintain or operate Navy Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) equipment, components, and systems. The Technical Writer will perform the following primary tasking: • Integrate support elements and resources into technical documentation to ensure schedule, scope, and quality are met during development, revision, editing, and publishing. The technical documentation required for personnel that maintain and operate Navy and Marine Corps equipment and to ensure lifecycle support of C4ISR components and systems includes the following: Work Breakdown Structures (WBSs), Computer Aided Design (CAD) drawings, Bills of Materials (BOMs)/Parts Lists (PLs), Test Procedures, First Article Units, Wiring Diagrams, Assembly Instructions, Disassembly Instructions, System Operational Verification Test (SOVT) plans and /or reports, Standard Operating Procedures (SOPs), Ship/Shore Installation Drawings (SIDs), Technical Manuals (TMs), User's Logistics Support Summaries (ULSSs), Software User Manuals/Guides (SUMs/SUGs), Allowance Parts Lists (APLs), Planned Maintenance System (PMS) Maintenance Index Pages (MIPs) and Maintenance Requirements Cards (MRCs), Ship Change Documents (SCDs), Engineering Change Requests and Proposals (ECRs/ECPs), Software Delivery Documents (SWDs), and ILS certifications., • Provide engineering change documentation including creating or updating pre-installation drawing packages as well as “as-built and as-fielded” drawing packages addressing all aspects of configuration changes including relocation of “interfering” equipment., • Develop, review, revise, and/or update technical documents in support of modifications and upgrades of supported equipment or systems necessary to operate, maintain, and return such equipment or system to a serviceable state., • Conduct requirements analysis and ensure a requirements traceability is documented. Must possess significant technical writing experience, including the ability to liaise with and between an engineering staff and average joe’s (with little or no technical experience). Must have the ability to understand technical requirements (technical publications and drawings); research and collect parts, systems, and programs data and research obsolescence issues. Must be experienced and comfortable working with other contractor personnel and interfacing/coordinating with Government Integrated Product Team (IPT) Leads and Contracting Officer Representatives (CORs). REQUIRED SKILLS/YEARS OF EXPERIENCE Three years of current or other relative experience supporting DoD C4ISR projects with analysis, generation, tracking, and corrections of relevant data; demonstrated ability to communicate in a group environment and work collaboratively with diverse stakeholders. The Project Analyst should also have experience in resolving process procedures and conflicts to optimize outcomes. Education: Bachelor’s degree Travel Required: 0% Work Location: San Diego, CA This position is required to have and maintain a Secret US DoD security clearance. PREFERRED SKILLS Computer Aided Design (CAD) skills is a plus. Quality Management System (QMS) experience that is compatible with ISO 9001:2015. REMARKS Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Compensation: $41 - $48 an hour. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran ***When responding to this posting please reference job # SD25-120 Technical Writer II (METOC). Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR Xwv970YENE

Job Description About the Opportunity Coordinates the Quality Assurance Inspectors to inspect incoming materials, work in-process and finished goods in the production/assembly of dental parts/assemblies/finished goods to ensure conformance as defined by ISO 13485:2016, FDA regulated standards, customer specifications, and Argen requirements. In this role, the successful candidate will: • Ensures Quality Inspection area is running efficiently., • Makes on-the-spot personnel adjustments to keep processes on times, and communicates all adjustments to the Supervisor., • Communicates clear instructions to team members., • Ensures safety guidelines are followed., • Facilitates team participation., • Acts as a liaison between inspectors and the Supervisor., • Assists the Supervisor to conduct and document training., • Ensures compliance to all applicable regulations to FDA, ISO, MDSAP, OSHA, etc., • Ensures completeness and accuracy of quality inspection documentation., • Assists inspectors by answering questions and demonstrating inspection processes., • Confirms all Quality Inspectors are up to date on their training requirements in Vivaldi., • Reinforces proper adherence to required Personal Protective Equipment (PPE) for the area., • Utilizes microscope, digital calipers, micrometer, optical comparator, vision measurement system, and other related equipment with optimal accuracy., • Provides in-process/final inspection and testing as required., • Provides inspection of outside processing (receiving inspection)., • Maintains proper inspection and test records., • Assures that non-conforming material has been properly identified., • Advises the responsible production personnel of the acceptability of products or materials based on results of testing and/or inspection., • Provides solutions to technical problems and assists on special projects., • Maintains lot traceability, log sheets, and good housekeeping practices at all times., • High school diploma required., • Previous experience working in a GMP facility a plus., • Knowledge of cGMP regulations ISO 13485, 21CFR Part 820, CMDR SOR/98-282, 93/42/EEC, RDC 16 2013, MHLW MO 169 and TG(MD)R Sch3 preferred., • Knowledge of scientific products and services., • Conform to all customer requirements for background checks, health and safety issues, security clearance., • Exhibits leadership skills and accountability., • Fast learner with high attention to detail., • Strong communication skills., • Excellent Customer Service Skills; display a professional can-do attitude., • Perform duties with the highest regard for safety and quality., • Ability to understand and follow site protocols, policies and procedures, • Must be flexible, forward- thinking, motivated, and have the ability to act independently., • Basic computer skills including Microsoft Office with proficiency in Word and Excel., • Ability to prioritize tasks and meet deadlines. lRMGxusprA

Job DescriptionTitle: Clean Room Technician I Duration: 6 months Location: San Diego, CA 92121 Shifts: 1st shift 7am-3:30pm, 2nd shift 3pm-11:30pm Job Details: We are looking for a Bottling Technician for our Form, Fill, and Finish Group. This role will be responsible for processing product formulations, dispensing antibody products, capping, labeling, kitting and completing batch records, and putting away Finished Good Inventory (FGI). This is a highly team oriented group which involves working closely with other core teams within the Bottling Department as well as other departments such as Planning, Receiving, Inventory Control, Custom Solution Team (CST), Packaging and Quality Control groups. Responsibilities: • Assist in performing various bottling related tasks to include dispensing antibody solutions, capping and labeling of vials, tubes or bottles, and assembly of kits, • Formulate products per approved Standard Operating Procedures (SOPs) and work instructions including multi-component cocktail formulations, • Verify formulation worksheets to ensure that information such as concentrations, lot numbers etc. are correct, • Put away finished goods products according to their designated temperature conditions, • Use computer programs such as Microsoft Excel, • Set-up and prepare equipment for ongoing operations, • Operate computer-controlled process support/process equipment (i.e., filling line, lyophilizer, capping, labeling machine, etc.), • Follow instructions for completion of job tasks, • Adhere to correct procedures, policies and health/safety guidelines, • Clean and maintain work area and all lab equipment and supplies, • May perform data entry and production documentation completion tasks, • Other projects or responsibilities as may be required. Required Qualifications:, • 6 months of relevant experience in a laboratory and/or biotech manufacturing and/or filling/bottling/packaging working environment, • Experience in pipetting or dispensing liquid products Ability to perform simple math calculations #TB_EN #ZRCompany DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA