Computer assembly jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionCMM OPERATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CMM Operator. The CMM Operator is responsible for setting up and executing current CMM Programs and performing first piece inspections. Successful candidates will possess: • A HS Diploma or GED;, • 3-5 years of combined previous experience checking parts on a CMM, quality control, and/or sheet metal/machining;, • Ability to operate and use tools such as Coordinate Measuring Machine (CMM), FabriVision, height gage, comparator and profilometer;, • Ability to read and interpret blueprints;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to sit for extended periods and operate a computer;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description TOOL CRIB ATTENDANT Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Tool Crib Attendant. The Tool Crib Attendant is responsible for maintaining accurate inventory of the shop tools and equipment, as well as repairing or replacing tools or equipment as needed. Successful candidates will possess: • A HS Diploma or GED and 5 years of Tool Crib/Inventory experience;, • Ability to track and maintain tool inventory levels;, • Capacity to investigate tool quality problems and recommend and/or implement changes or improvements in tooling processes or methods;, • Excellent communication skills to work with outside tooling vendors and co-workers;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to crouch, stoop or stand, removing or placing items on shelves, and operate a computer;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $17.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description Title Strategic Account Manager Department Business Development Reports to Vice President, Business Development SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optical components, assemblies, and electro-optical systems. RPO specializes in a full spectrum of products & services including – Design and Engineering, Visible and Infrared Components, Glass and Plastic Molded Aspheres, Thin Film Coating, Optical Assembly and Electro-Optical Systems Integration. As one of the fastest growing companies in Rochester, RPO offers exciting career paths to work on market-leading programs. Job Summary: Rochester Precision Optics (RPO) is seeking a results-driven, relationship-oriented Strategic Account Manager to accelerate sales growth across both defense and commercial markets. As a key member of our business development team, this individual will manage day-to-day customer service and transactional sales while also cultivating long-term partnerships by recognizing customer needs, uncovering growth potential within existing accounts, and coordinating internal teams to deliver lasting solutions. This role is also integral to the strategic growth of RPO’s catalog business by aligning e-commerce, inside sales, and operations to expand customer reach, improve responsiveness, and strengthen RPO’s overall market footprint. You Will: • Act as the company representative for assigned customers, managing relationships, products, services, deliverables and communications., • Develop strong, long-term client relationships and strategic account plans (targets, whitespace, product adoption, pricing strategy)., • Manage, resolve and communicate customer issues including delivery status, credit issues, reschedules, expedites, etc., • Collaborate across the organization (Business Development, Inside Sales, Engineering, Program Management, Operations, Supply Chain) to execute quotes and respond swiftly to customer inquiries—ensuring the catalog-/standard-product workflow is efficient and accurate., • Attend production and sales meetings, conference calls with customers and BD team to report status, opportunities and risks., • Review and manage all incoming orders and acknowledgements for accuracy, specification, timing, and alignment with catalog SKUs., • Take ownership of ERP system (Epicor) and CRM (HubSpot) data for the BD team—ensure data integrity, training, and reliable usage., • Manage incoming customer inquiries from the website, trade shows and direct outreach; spearhead the initial vetting and distribution of new catalog opportunities into the CRM., • Partner with e-commerce/marketing to optimize online conversion, promotions, landing pages and catalog user experience; drive cross-sell/upsell of standard product lines., • Forecast monthly/quarterly revenue, units and margin for assigned accounts; maintain pipeline hygiene and apply price-to-win logic for volume / standard orders., • Regularly conduct QBRs with strategic catalog accounts; track SLAs (lead time, on-time-delivery, RMA rate) and drive corrective actions internally. Education & Experience • Bachelor’s degree in business, marketing, or related field preferred; 7+ years of relevant experience in lieu of degree considered., • 5-7 years of proven B2B sales success in a high-impact role, ideally within manufacturing or optics., • Familiarity with manufacturing environments and ability to communicate at a technical level; optics experience is strongly preferred., • Demonstrated ability to manage transactional sales while cultivating long-term strategic partnerships., • Experience supporting business development efforts and driving growth within existing accounts., • Exceptional verbal and written communication skills for presenting, negotiating, and cross-functional collaboration., • Strong organizational skills with attention to detail and the ability to manage multiple priorities., • Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint) and CRM Platforms (HubSpot), • Experience working with ERP systems to manage client data, order processing, and cross-functional collaboration; Epicor preferred., • Ability to learn quickly and understand complex product offerings and translate them into customer solutions. You Are: • Results-Oriented: Motivated, hard-working and ready to level up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Environment & Physical Demands: • Please note: This is an in-office role based at our West Henrietta, NY headquarters. Remote work is not available for this position., • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 25 pounds, • Exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.), • Occasional travel required for customer and program meetings/coordination., • Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Vet In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description Title Quality Inspector Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Quality Inspector position will support inspection of precision optical assemblies and components in a cleanroom environment. The employee will regularly interface with Department Supervisors, Manufacturing Engineers, Quality Engineering, and Shipping to ensure on-time shipment of product and efficient identification and escalation of defects. You Will: • Perform In-Process and Final Inspection of optical and opto-electronic assembly components, products and processes., • Conduct visual inspections to verify compliance with engineering drawings, specifications, and quality standards., • Document inspection results accurately through data collection, logging, and reporting., • Communicate non-conforming or borderline conditions to appropriate personnel for resolution., • Review material certifications and test reports for completeness, accuracy, and compliance with purchasing and design requirements., • Collaborate with cross-functional teams to support quality assurance and continuous improvement initiatives., • Carry out additional quality-related tasks and responsibilities as assigned. You Have: • High School Diploma/GED. AAS or AS preferred., • Minimum of 2 years in a quality position or related field., • Experience with optical inspection and handling strongly preferred., • Extremely detail-orientated with the ability to notice small errors, including in data review., • Ability to read, analyze and interpret blueprints., • Comfortability using a computer and Microsoft office products., • Excellent time-manage skills., • The right candidate will be highly motivated and have the ability to take initiative with little supervision., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • Growth: The opportunity to learn and advance your career., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match., • Wellness: Health, dental, vision & life insurance., • Balance: 11 paid holidays, generous paid vacation and sick -time., • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Shift Schedule: 6am - 2:30pm Monday - Friday

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. C Shift: Monday - Friday, 10:00pm - 6:30am Before transitioning to a standard C shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: Monday - Friday, 2:00pm - 10:30pm Before transitioning to a standard B shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description Title Quality Control Technician Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Technician plays a critical role in ensuring the integrity and performance of precision optical components and assemblies. This position supports the implementation and maintenance of the ISO 9001 Quality Management System and collaborates with cross-functional teams to uphold rigorous quality standards throughout the manufacturing lifecycle. The technician will perform inspections, analyze data, and contribute to continuous improvement initiatives to enhance product quality and customer satisfaction. You Will: • Perform visual, dimensional, and functional inspections of incoming materials, in-process components, and finished products using precision measurement tools (e.g., micrometers, calipers, interferometers)., • Conduct First Article Inspections (FAI), Receiving Inspections, In-Process Inspections, and Final Product Inspections., • Verify product conformance to specifications and customer requirements prior to shipment., • Investigate non-conforming materials and products to determine root causes., • Collect, analyze, and interpret statistical data from manufacturing processes to identify trends and anomalies., • Generate quality reports and dashboards to communicate findings to engineering and production teams., • Support shipment readiness with data validation, traceability checks, and conformance verification., • Propose and implement corrective and preventive actions (CAPA) in collaboration with engineering and production teams., • Maintain and update quality documentation, procedures, and records in compliance with regulatory and internal standards., • Support internal and external audits with documentation and process evidence., • Train and mentor new employees in inspection techniques, quality standards, and proper use of measurement tools to ensure consistency and accuracy across the team., • Perform additional tasks and responsibilities as directed by management to support departmental goals, continuous improvement initiatives, or cross-functional projects., • May work in cleanroom environments and low-light conditions to inspect sensitive optical components. You Have: • High school diploma/GED Required, associate degree or technical certification in optics, engineering, manufacturing, or related field preferred., • Minimum of 3 years’ experience in quality assurance or inspection in a manufacturing environment, ideally in optics or precision components., • Proficiency in using precision measurement instruments and inspection equipment., • Familiarity with ISO 9001 standards and quality system documentation., • Strong analytical skills and attention to detail., • Ability to read and interpret engineering drawings, specifications, and work instructions., • Experience with statistical process control (SPC) and root cause analysis methodologies., • Basic computer skills (Excel, Word, ERP systems); experience with quality software a plus., • Effective communication and teamwork skills. You are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match., • Wellness: Health, dental, vision & life insurance., • Balance: 11 paid holidays, generous paid vacation and sick -time., • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. A Shift Schedule: 7am - 3:30pm

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job DescriptionJob Summary Vanteon is seeking applicants for senior-level embedded software roles, including as Principal Embedded Engineer and Senior Principal Embedded Engineer. The specific level will be dependent on the applicant's level of experience. The position will design and develop Petalinux Board Support Package and MAC layer communications firmware for custom hardware. Specific platforms would include the Xilinx Zynq ARM and ADI ADRV900X Transceiver platforms. Duties/Responsibilities The following is a list of expected duties to be involved in this position, this is not fully inclusive, and management may assign other duties: • Analyze system for identification of use cases and development of System Requirement Specifications., • Design and implement embedded software, device drivers, and board support packages., • Investigate and propose project-related technologies to meet requirements., • Create technical documentation including Software Requirements Specifications, Design Documents, Test Summary Reports, and development notes., • Collaborate with hardware engineers for design and integration efforts., • Define and execute engineering verification and acceptance criteria tests.Required Skills & Knowledge, • Experience in real-time embedded systems software development for Linux, RTOSs, MAC sublayer, multi-threaded programming, distributed design, device drivers, hardware diagnostics, BIOS, interrupt handling and boot loader development., • BSP creation and new hardware bring-up for bare-metal, RTOS, and Linux platforms, • Proficiency with C, C++ and ability to work with assembly level for embedded microprocessors and/or DSPs, • Advanced object-oriented design approaches to reusable software systems design, • Experience using embedded tools such as compilers, debuggers, ICE, Emulators, • Make and version control systems experience, • Interface hardware/software design experience, • Proven track record of successful product completion and deployment, • Excellent analytical and communication skills, • Highly motivated, well organized self-starterDesired Skills, • Xilinx Petalinux bring-up, customization, and Zynq hardware integration, • ADI ADRV9002 configuration and control, • OpenAmp, • Linux Yocto build recipes, • Linux kernel and application software development, • Linux Ethernet driver stack configuration and routing (OpenWRT, etc.), • Linux virtual machine & docker container development, • SE Linux, • Linux IMA, • TPM integrationEducation and Experience, • BS EE/CE/CS/SE, • 5+ years' experience in embedded systems softwareOther Requirements, • Training and regular duties require a physical office presence. Although Vanteon will comply with all NYS/Federal requirements related to COVID-19, candidates will be expected to work on-site., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Please note that all offers for hire are contingent on passing e-verify, background, and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job Description Title Database Administrator Department Contracts & Legal Affairs/IT Reports to IT Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Database Administrator as a member of the Information Technology Team, will be responsible for the creation and maintenance of information systems and processes used for collecting and presenting manufacturing data to include the ERP and Visual Factory solutions that RPO utilizes (Epicor and FileMaker)The ideal candidate should have a proven track record of working well with others and the use of the VBA and SQL programming language and knowledge or experience in the concept of a “Visual Factory”, as well as maintain and develop applications within the FileMaker platform You will: • Creates, modifies, and maintains databases and database-related applications utilizing RPO’s primary manufacturing software solutions to include, but not limited to, FileMaker and the ERP System (Epicor), • Establish and continue the development of in-house information systems to manage the daily flow of manufacturing data, • Work with other IT team members on implementation, testing, and configuring of new databases and front-end software in RPO’s established information systems, • Maintain existing SQL server databases and execute queries, updates, backups/restores as needed or required utilizing SQL Management Studio and other tools, • Maintain and periodically refresh test and pilot databases in the ERP System, • Work with RPO's existing Visual Factory displays and PowerBI dashboards to meet current production demands while new solutions are developed, • Ensure that visual factory displays are showing concise, accurate and relevant data to meet the production needs of their respective areas, • Work with IT and other relevant stakeholders on the new implementation of and migration to the Epicor Kinetic ERP system, • Collaborate with key stakeholders to develop effective ERP system processes, dashboards and reports within the Epicor system, • Maintain professional and technical knowledge by attending webinars, workshops and conferences and other training relevant to database systems, Visual Factory and other production needs, • Work under the confines of NIST 800-171, CMMC 2.0 Level 3 and DFARS contractual requirements when implementing business processes, solutions, and software You have: • 3+ years’ experience with Epicor ERP., • 3+ years’ experience with industry standard programming concepts such as, C# and SQL., • Strong SQL database knowledge required, • Experience with VBA is a plus but not required., • Expert-level Microsoft Excel skills preferred, • FileMaker Pro knowledge and experience required., • On-call support as required to be limited to systems under the Database Administrator’s purview, • Self-motivated, positive attitude, high energy, hands-on individual who can multi-task well, • Basic manufacturing knowledge required. Experience with Lean Manufacturing desired, • Ability to read, analyze and interpret VBA and other computer code. Ability to communicate effectively with various levels of the business through both verbal and written communication and work with key stakeholders on analyzing business needs to formulate solutions., • Ability to apply advanced mathematical concepts., • BA/BS Degree in related field or equivalent experience and H.S diploma. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Work Requirements & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description Step into a day on our manufacturing floor You arrive at our Rochester, NY site and join a cross-functional crew of Operations Technicians and Engineers. A line pauses; you dive in—reading electrical prints, tracing pneumatics, isolating a fault in a high-speed assembly system. You resolve the issue, log the work, and brief the next shift so output stays on track. In between calls, you perform scheduled PMs, tweak a PLC parameter, and assist in an offline rebuild to boost reliability. Meet us in person Onsite Job Fair: December 13th, 9:00 am–12:00 pm at 1400 North Goodman Street, Rochester, NY 14609. Why this role matters As part of a leading global eye health organization, your work keeps complex production equipment running safely and efficiently—directly supporting the output that helps people see better worldwide. What you will do • Partner with Operations Technicians and Engineers to reduce downtime and elevate line performance., • Troubleshoot, repair, and document issues on fast-moving manufacturing equipment., • Diagnose PLC/HMI control logic when appropriate and capture findings in maintenance records., • Execute and record preventive maintenance activities., • Provide clear shift-to-shift handoffs and communicate equipment status to supervisors/management., • Contribute to offline machine rebuilds and pre-work to support upgrades and reliability., • Work within Bausch + Lomb’s 12-hour rotational framework; comfort with this schedule is required., • Travel occasionally to support equipment builds, integration, or training as needed (minimal)., • Support plant equipment systems under the direction of the Plant Maintenance Supervisor. Shift options with built-in overtime and regular days off, • Rotating Day/Night: Week 1: Mon/Tue 6 AM–6 PM, Fri/Sat/Sun 6 PM–6 AM; Week 2: Wed/Thu 6 AM–6 PM., • High school diploma or GED (required)., • Apprenticeship or associate degree in an electrical/mechanical discipline preferred; relevant hands-on experience can substitute., • Knowledge of OSHA requirements and familiarity with Microsoft Word, Excel, and Outlook preferred., • At least 2 years as a technician performing equipment repairs and preventive maintenance., • Strong attention to detail, teamwork, and clear communication; experience with documentation in regulated environments (medical device or similar) is a plus. Technical strengths that set you apart, • Comfort reading mechanical drawings and electrical schematics (required)., • Proven troubleshooting skills across mechanical, electrical/electronic, pneumatic, and hydraulic systems., • Exposure to PLC troubleshooting; experience with robots and servos is desirable (SCARA, FANUC, Staubli, IAI)., • Background with injection molding equipment (electric and hydraulic) is a plus., • Understanding of cGMP and working in cleanroom environments preferred. You’re proficient in, • Equipment troubleshooting and root-cause analysis, • Electrical/electronic systems and reading schematics, • Mechanical troubleshooting, • Pneumatics and hydraulics, • Motor replacement, repair, and maintenance

Job Description Title Optical Assembly Manager Department Assembly Reports to Director of Operations SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: We are seeking a seasoned and driven Production Manager to lead our Optical Assembly operations and support broader manufacturing initiatives across the company. This role demands a hands-on leader who thrives in a fast-paced, precision-driven environment and is passionate about building high-performing teams, optimizing production workflows, and delivering exceptional results. As a key member of our management team, you will be responsible for aligning daily operations with strategic business goals, ensuring consistent quality and on-time delivery, and fostering a culture of safety, accountability, and continuous improvement. You’ll play a critical role in shaping our production capabilities, driving operational excellence, and supporting long-term growth. You Will: • Lead daily operations of the Optical Assembly department, ensuring consistent delivery of high-quality products on time and within budget., • Monitor performance metrics and implement corrective actions to meet delivery, cost, and quality targets., • Maintain a clean, organized, and showcase-ready production environment for internal and external stakeholders., • Collaborate with senior leadership to develop and execute long-term manufacturing strategies that align with company goals., • Champion a culture of safety, equity, and continuous improvement across all production areas., • Identify and pursue growth opportunities through customer alignment, market analysis, and technology trends., • Oversee equipment maintenance, calibration schedules, and capital investment planning., • Ensure optimal utilization of space, utilities, and resources in collaboration with Facilities and Finance teams., • Recruit, train, and retain top-tier assembly and test personnel., • Foster a high-performance culture through clear expectations, coaching, and performance management., • Ensure compliance with HR policies, safety protocols, and operational procedures. You Have: • Bachelor’s degree in engineering, Optics, Manufacturing, or a related technical field (master’s preferred), • Minimum 10 years of progressive leadership experience in a high-precision manufacturing environment, ideally with a focus on optical assembly and test., • Proven ability to lead and inspire cross-functional teams, driving accountability, engagement, and continuous improvement., • Demonstrated success in managing complex production workflows, balancing quality, cost, and delivery in a fast-paced setting., • Strong understanding of lean manufacturing principles, Six Sigma, or other process improvement methodologies., • Experience with capacity planning, resource allocation, and capital investment strategy., • Skilled in data-driven decision-making, using metrics to guide performance and identify opportunities., • Exceptional communication and interpersonal skills, with the ability to collaborate across departments and influence at all levels., • Adept at navigating change, solving problems under pressure, and adapting to evolving customer and market demands., • Commitment to building a safe, inclusive, and high-performance culture. You are: • Results-Oriented: Motivated, hard-working and ready to level-up, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge, • Process Oriented: Well organized, demonstrating attention to detail, • Analytical: Possess an “If there’s a problem, I’ll find a solution” attitude, • Accountable: Demanding the highest quality from yourself and team members, • Detail-Oriented: Have excellent time management and organizational skills, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • Culture: An energetic, value-driven team where you will experience the reward of meaningful work! Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to use hands and fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolonged periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and may require area specific safety training., • This position works in a manufacturing environment. The noise level in the work environment is usually loud. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job DescriptionDescription: Located in Rochester, NY and founded in 1916, G&H | GS Optics specializes in the custom design and manufacture of precision polymer optics for use in biomedical, healthcare diagnostics, machine vision and analytical instrument markets, as well as military and civilian night-vision and visible-range sighting applications. In addition to the highly automated injection molding process, it has well established in-house capabilities to provide custom designed diamond turned and injection molded prototypes, thin film anti reflective and reflective coatings and integrated optical assembly solutions. As a Molding Operator, you will play a vital part in the production of high-quality optical lenses by inspecting, degating, and packaging injection-molded parts. You will also contribute to quality assurance, process adherence, and operational excellence in a clean and efficient manufacturing environment. Key Responsibilities: • Inspect and “degate” injection-molded polymer optical lenses of various sizes and shapes., • Accurately package parts that meet customer and production quality standards., • Report production metrics including cycle time and scrap rates in the ERP system., • Operate one or more molding machines and perform basic secondary operations such as milling., • Maintain a clean, organized, and contamination-free workspace., • Read, understand, and follow all work instructions, safety protocols, and process control plans., • Collaborate with engineers, process technicians, and quality assurance personnel to resolve production issues., • Communicate any operational or quality concerns proactively to the appropriate team members., • Participate in inventory checks and prepare materials for the next shift., • Assist in the development and updating of work instructions and process improvements.Requirements:, • High school diploma or equivalent (required), • Prior manufacturing and/or inspection experience, • Familiarity with injection molding operations, • Understanding of ISO 9000 standards (preferred), • Knowledge of customer satisfaction and quality expectations, • Effective communication and interpersonal skills, • Experience in a production environment with an emphasis on cleanliness and quality, • Basic computer proficiency, particularly in data entry and ERP systems, • Commitment to safe work practices and team collaboration, • Work in a high-tech, precision-driven environment, • Collaborate with a skilled team of professionals, • Competitive compensation and benefits, • Opportunities for growth and advancement The Company is committed to providing equal employment opportunities for all employees and applicants for employment. The Company does not discriminate in employment opportunity or practices on the grounds of gender, race, religion or belief, age, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by national laws under which the Company operates. In the instance that the position will involve having access to items and technical data that may be controlled under U.S. export laws and regulations ("U.S. Export Control Laws"), including but not limited to the Export Administration Regulations ("EAR") and the International Traffic in Arms Regulations ("ITAR"). To comply with the U.S. Export Control.

Job Description Transform and elevate the retail experience, one display at a time! ActionLink is seeking a Part-Time Retail Electronics Merchandiser to join our team for Rochester, NY and the surrounding area. What you will do: • Store Visits: Complete projects at major retail establishments like Best Buy, Walmart, Target, and others within an assigned radius territory, • Purpose: To turn shelves into sales magnets and drive revenue by ensuring the proper placement, assembly, maintenance, and troubleshooting of our clients' promotional product displays, • Clients: Represent innovative, global clients such as Microsoft, Samsung, T-Mobile, Dyson, Bose, Intel, and many others, • Scheduling: This position offers up to 20 hours per week. Project hours and times fluctuate, so flexibility Monday through Friday typically between 8:00am to 5:00pm is necessary for the position. No weekends or evening hours required., • Additional Opportunities: If you can cover a larger region and travel to other outlying areas or states, there may be opportunities for additional hours, • Compensation: General merchandising projects are paid starting at $18.00 per hour, • Additional Technical Projects: Available at higher rates, based on need, • Employment Type: W2 employment with a bi-weekly pay schedule and direct deposit, • Retirement Savings: Consider our optional 401(k) retirement savings plan with company match, • Travel Reimbursement: Store-to-store drive time and mileage assistance, • Training: Paid training time is provided to prepare you for program success, • Experience: Previous merchandising, 3PL, or relevant retail experience is highly desirable, • Versatility: Ability to handle all levels of merchandising work within the assigned territory, • Attention to Detail: Ability to follow complex written instructions and display diagrams, • Independence and Teamwork: Comfortable working independently most of the time and collaborating with a small team when needed, • Essentials: Access to the internet, basic hand-held tools, and a smart device with Wi-Fi/GPS capability. Access to a laptop or desktop computer is a strong plus., • Travel Ability: A valid driver’s license and reliable vehicle transportation #MERCH2

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description Under the direction of the Welding Group Leader or Supervisor, the Welder works from customer drawings and a traveler to fabricate and weld components to produce the highest quality products at the lowest cost, while meeting departmental performance standards, customer specifications and delivery requirements, in accordance with company policies and procedures. A Class A Welder is capable of performing all aspects of welding. Can weld any type of project while consistently meeting or exceeding cycle times. Have the ability to fabricate from prints without the aide of fixtures. Able to do prototypes while also working with engineering to develop fixtures. Capable of being certified. Requires little to no supervisor and has the ability to interpret blueprints and understands weld symbols at an advanced level. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Have the ability to regularly lift and/or move 25-50 pounds, • Meet minimum 20/20 vision standards (with corrective lenses if needed), • Score a minimum score on the in-house welding test, • Knowledge on how to set-up weld machine and lay a quality bead for both Mig and Tig, • Ability to read and understand blueprints and weld symbols at an advanced level, • Knowledge of the metric system preferred, • Accurately measure and lay out locations for welded components, • Adjust weld as needed to accommodate varying thicknesses of steel, • Operate grinder, drill, band saw, torch, • Complete and maintain all required paperwork, records, documentation, etc., • Using MIG and/or TIG, weld components together according to blueprints and Traveler, • While performing the duties of this job, the employee is regularly required to stand, use hands, stoop, kneel, or crouch., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus., • Must work at a reasonable pace (measured by production efficiency) and within our quality standards to insure timely completion, • Check and verify part numbers prior to assembly of product to customer specifications, • Must supply his/her own welding helmet and safety shoes

Job Description Title Coating Technician I Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Shift Schedule: Monday - Friday, 6am - 2:30pm

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or other related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvements actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Title Coating Technician I - B Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: Monday - Friday, 2pm - 10:30pm. 5% Shift differential offered to B shift employees. Training will take place on A shift before transitioning to a B shift Schedule: Monday - Friday 6am - 2:30pm

Job DescriptionDescription: Position Summary: The Senior Manufacturing Engineer will be responsible for contributing to the design of production machinery and will identify and recommend solutions to production problems related to materials, processes, and tooling. They will troubleshoot and diagnose assembly processes and reduce total defects through the analysis of data and corrective actions. This position will also support the functions of the WG Engineering Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Design and/or enhance manufacturing processes to assemble a bill of materials into a final product., • Utilize methods for waste minimization within a manufacturing system and address productivity., • Lead process improvements and controls through use of analysis and inspection/validation techniques, • Document Corrective Actions and Preventative Actions., • Generate, validate, and update as needed assembly work instructions in a clear and presentable configuration., • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., • Support both assembly floor priorities and longer-term development project activities. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Minimum bachelor's degree (BA/BS) in mechanical, electrical, manufacturing engineering, or equivalent., • Knowledge of standard manufacturing techniques such as fastening, structural adhesive bonding, hand assembly/low volume operations and tools and functional product testing., • Experience with precision alignments and tolerance analysis., • Use of techniques such as additive manufacturing/3D printing to create assembly floor aids and holding fixtures., • Experience with methods for process improvement and control., • Knowledge of incoming inspection and validation techniques, such as optical inspection and CMM., • Basic knowledge of the requirements of an ERP system for product specifications and bills of materials and routings., • Experience in additional disciplines such as electrical/electronic, computer/data acquisition, optics., • 5+ years of experience in new product introduction and sustaining engineering., • Working knowledge of SolidWorks and PDM., • Experience in utilizing automation such as robotic assistance and metered dispensing systems, PLC, and Vision Systems as utilized for aiding productivity in manufacturing., • Knowledge of Six Sigma analysis for process improvement and control. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Title CNC Operator 1 - B Shift Department Diamond Turning Reports to Diamond Turning Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: A Diamond Turning Operator, level I is a highly skilled machinist/toolmaker that creates optical surfaces in a variety of materials using high precision machining centers. You will: • Operate and setup diamond turning/grinding machining centers., • Understand CNC programming and have the ability to create and/or modify CNC programs., • Operate and understand Optical test equipment such as interferometers and surface profilometers., • Operate tradition inspection equipment such as toolmaker’s microscope, micrometers, height gages, and vernier calipers., • Ability to read and understand both optical and traditional blue prints., • Possess computer skills. You have: • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Ability to apply basic mathematical concepts., • High School Diploma or equivalent., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles.May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. RPO offers a competitive work life balance with the opportunity to grow within a unique industry and along with a collaborative, motivated team to drive key programs. B shift hours: 2pm-10:30pm Training takes place Monday-Friday 6am-2:30pm

Job Description Title Manufacturing Operations Supervisor Department Operations Reports to Director of Operations SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Manufacturing Operations Supervisor is a mid-level leadership role dedicated to guiding people, strengthening culture, and ensuring seamless product flow across our Vast manufacturing operations. This position is intentionally designed as a general supervisor role, giving you the flexibility to step into our manufacturing environment and grow into the area where your leadership style and strengths make the greatest impact. We believe leadership is about service. In this role, you’ll focus on empowering teams, fostering collaboration, and creating an environment where people can thrive. You’ll be the bridge between our workforce and our operational goals—removing obstacles, aligning priorities, and ensuring that every team member feels supported and valued. Success here isn’t measured only by metrics, but by the strength of the culture you help build. You’ll champion servant leadership by listening first, coaching with empathy, and leading by example. At the same time, you’ll steadily deepen your understanding of our products and processes, ensuring that operational excellence is achieved through both people and flow. You Will: • Support and empower technicians and operators, ensuring they have the tools, training, and encouragement to succeed., • Build strong relationships, mentor team members, and foster a culture of trust, accountability, and continuous improvement., • Oversee production execution across multiple work cells or shifts, ensuring smooth transitions and timely delivery of customer orders., • Collaborate with planning and scheduling teams to align resources with delivery targets., • Uphold standards for precision optics manufacturing, cleanroom practices, and workplace safety., • Provide feedback, lead training initiatives, and support career growth for technicians and operators., • Monitor KPIs such as yield, cycle time, and labor efficiency, and lead lean/5S initiatives to improve flow and reduce waste., • Partner with engineers, supply chain, and quality teams to improve processes and ensure materials, tools, and equipment are available., • 5+ years in manufacturing leadership or team supervision, with a proven ability to lead people and manage priorities., • A genuine commitment to supporting others, building trust, and leading by example., • High school diploma or GED required; associate or bachelor’s degree in optics, engineering, manufacturing technology, or related field preferred., • Familiarity with ERP systems, scheduling, and basic production metrics., • High school diploma or GED required; associate or bachelor’s degree in optics, engineering, manufacturing technology, or a related field is strongly preferred., • Strong interpersonal skills, decision-making ability, and a collaborative approach., • Lean Manufacturing, Six Sigma, or Supervisory Leadership credentials are a plus. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Tool Maker Job Code: 31806 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: The Airborne Focus Factory of L3Harris Space and Airborne Systems located in Rochester, New York, is looking for an experienced Tool Maker to join the assembly and integration team. The job scope includes complex parts, assemblies for engineering prototypes, unique products, low-volume manufacturing. Scope includes the assembly and integration of low volume hardware. Candidate must possess a machining and fabrication background and ability to work within tight tolerance specifications. Scope is focused on the timely execution of assigned tasks as an individual contributor and function well within a team environment. This role involves working directly with engineers on the design, development and fabrication of new and existing products to optimize design for manufacturability. Essential Functions: \n • Tool Maker or Machinist experience. \n, • Perform work in manufacturing and/or prototyping environment. \n, • Must be able to read engineering drawings/blueprints/schematics and detailed work instructions. \n, • Ability to maintain accurate records and manufacturing documentation. \n, • Must be mechanically inclined, and be able to work with very fragile and precise optomechanical assemblies. \n, • Speaks clearly and concisely, presenting ideas effectively to individuals or groups. \n, • Ability to identify problems and suggest solutions. \n, • Demonstrates appropriate computer knowledge. \n, • Understands and adheres to established policies, procedures and proper labor charging practices. \n, • Must be able to perform as an individual contributor as well as within a team environment. \n\n Qualifications: \n • Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience.\n, • Ability to obtain US Government security clearance. \n\n Preferred Additional Skills: \n • Skilled Journeyman's Certification. \n, • Experience in an Electrical/Mechanical/Optical fabrication discipline. \n, • Aerospace or Defense industry experience. \n, • Experience with CNC programming utilizing MasterCAM. \n, • Experience with sheet metal fabrication. \n\n In compliance with pay transparency requirements, the salary range for this role in New York State is $30.76/hr - $57.21/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401 (k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-KT1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description Job Summary: Performs precision and intricate hand and machine assembly of finished product using equipment and methods. Essential Duties and Responsibilities: • Assembles complex components and inspects connections for correct tolerance and fit., • Fasten parts and subassemblies per specifications provided by customer., • Operates various assembly and packaging equipment including lathes, mills, sonic welders, hot stamper, heat stakers, auto baggers., • Will read and interpret customer prints and specifications., • Performs various types of machine and manual assembly., • Identifies and resolves assembly and packaging issues and notifies Floor Lead/Supervisor., • Inspects assembled parts for any imperfections as per customer specifications, may include software test., • When requested, may work on special projects and various related assignments., • May be required to compile various reports and data tracking., • May be required to work in various areas of operations when necessary. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee must have excellent hand/eye coordination, and able to handle a variety of size pieces. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or GED required, • Minimum 2 years experience in small parts assembly or equivalent job experience, • Ability to read and interpret blueprints, • Familiar with various trade tools, • Attention to detail, • Math skills, • Work independently with minimal supervision Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. RPO offers a competitive work life balance with the opportunity to grow within a unique industry and along with a collaborative, motivated team to drive key programs.

Job Description Title Assembler - B Shift Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift Monday-Friday 2pm-10:30pm All B shift employee's will train on A shift for 2-4 weeks before transitioning to a B shift schedule. Training Schedule: 6am - 2:30pm

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Tool Maker Job Code: 30843 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: The Airborne Focus Factory of L3Harris Space and Airborne Systems located in Rochester, New York, is looking for an experienced Tool Maker to join the assembly and integration team. The job scope includes complex parts, assemblies for engineering prototypes, unique products, low-volume manufacturing. Scope includes the assembly and integration of low volume hardware. Candidate must possess a machining and fabrication background and ability to work within tight tolerance specifications. Scope is focused on the timely execution of assigned tasks as an individual contributor and function well within a team environment. This role involves working directly with engineers on the design, development and fabrication of new and existing products to optimize design for manufacturability. Essential Functions: \n • Tool Maker or Machinist experience. \n, • Perform work in manufacturing and/or prototyping environment. \n, • Must be able to read engineering drawings/blueprints/schematics and detailed work instructions. \n, • Ability to maintain accurate records and manufacturing documentation. \n, • Must be mechanically inclined, and be able to work with very fragile and precise optomechanical assemblies. \n, • Speaks clearly and concisely, presenting ideas effectively to individuals or groups. \n, • Ability to identify problems and suggest solutions. \n, • Demonstrates appropriate computer knowledge. \n, • Understands and adheres to established policies, procedures and proper labor charging practices. \n, • Must be able to perform as an individual contributor as well as within a team environment. \n\n Qualifications: \n • Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience. \n, • Ability to obtain US Government security clearance. \n\n Preferred Additional Skills: \n • Skilled Journeyman's Certification. \n, • Experience in an Electrical/Mechanical/Optical fabrication discipline. \n, • Aerospace or Defense industry experience. \n, • Experience with CNC programming utilizing MasterCAM. \n, • Experience with sheet metal fabrication. \n\n In compliance with pay transparency requirements, the salary range for this role in New York State is $25.48/hr - $47.59/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401 (k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-KT1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with the customer in developing new products and expand upon existing product lines. Essential Duties and Responsibilities: • Able to make decisions on new production quotes and expansion of product lines for customers., • Consults with customer’s technical personnel regarding current and upcoming projects or concepts., • Develops new products from concept to full production., • Conducts a search of new materials, processes, and procedures necessary to enhance and improve a product., • Prepares accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Review new projects to determine effectiveness of design regarding moldability, tool concept, assembly and material required., • Monitors work in process and assures that the customer is advised and approves alterations made to product or schedule., • Provides engineering support and input to departments within company., • Ensures designs of tools & fixtures have appropriate concept and support for design & mfg., • Assists manufacturing department in development of processes and mold necessary for production., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency and makes recommendations., • May represent Program Management Department on cross-functional teams., • When requested, may work on special projects and various related assignments. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelors degree in Engineering or equivalent in education and experience., • Minimum 5 years experience in plastics or related industry, • Sound knowledge of engineering theory and design criteria, • ISO experience a plus., • Need to have excellent relationship-building skills., • Good oral and written communication skills., • Strong organization skills., • Must be familiar with computers and computer software. Syntec Technologies is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, gender, age, disability, protected veteran status, or any other reason prohibited by law.