Electrical engineer jobs in Wayne, NJCreate job alerts

Job Description MAURY MICROWAVE JOB DESCRIPTION Date: 06/23/2025 Job Title: RF Test Technician FLSA Status: Non-Exempt Department: DC Assembly & Test Reports to (Title): Lead Manufacturing Engineer Brief Summary of Position: Perform RF testing and calibration of instruments, sub-assemblies, RF assemblies, and complete hardware systems. Possess a well-rounded set of mechanical, electrical, and troubleshooting skills. The person hired for this position will work on industry-leading low-phase noise synthesis, analysis, power detection, and satellite link emulation products. Essential Functions of the Position: • Use complex tools such as spectrum analyzers, signal generators, vector-network analyzers, current probes, voltmeters, and precision inspection equipment to test and troubleshoot RF-based equipment in the frequency range of DC to 40GHz., • Use engineering and manufacturing instructions to test assembled electronic units. Ability to read and interpret electrical schematics., • Interpret data by applying a basic understanding of DC and RF: voltage, current, power, insertion loss, return loss, linearity, phase noise, noise figure, and spectral analysis., • Determine acceptable versus faulty performance. Repair and adjust as required using standard troubleshooting techniques., • Repair or replace defective or improperly functioning circuitry and electronics components using hand tools and soldering iron., • Maintain system logs to document testing and equipment operation., • Record and analyze data results from standard test routine formats., • Ability to manage multiple tasks and meet established deadlines. Requires good planning, organization, and time management skills., • Diligent in following ESD protocols., • Maintain a clean, safe work area compliant with ISO procedures, policies, and regulations., • Ask questions when instructions are not understood or are unclear. Requirements (education, prior work experience, special skills, etc.) • High school diploma or equivalent and 5+ years of formal electronic and mechanical assembly experience., • Ability to read and interpret electronic and mechanical diagrams., • Familiarity with cavity filters and frequency converters is a plus., • Simple programming skills is a plus., • Strong assembly and RF test skills., • Ability to use basic hand tools and soldering iron., • Excellent communication skills; good analytical and problem-solving skills., • Works well as part of a small team with high output., • Computer proficiency using various software programs (Microsoft Office, Factory test software), • Knowledge of Excel formulas Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance., • Group 401(k) plan with company matching contributions., • Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally

Job Description Civil Engineer – Wayne, NJ Municipal/Civil Engineering design and construction phase support for our Wayne, NJ office. B.S. in Civil Engineering, minimum EIT Certified and 3+ years of related public sector experience preferred. This is a full-time position with a strong benefits package. About our Company For over fifty-five years, Alaimo Group has provided engineering and planning services throughout the State of New Jersey and in the neighboring states of Pennsylvania and Delaware. Our firm is a composite of civil, sanitary, environmental, architectural, planning, structural, mechanical, electrical and hydraulic engineering individuals. We are one of the few firms that specialize in work for the public sector, thus avoiding any appearance of conflict in providing service to our clients. We have experienced continued growth in the number of people and the range of disciplines represented, and the capabilities of our professional and support staff. We now have some 100 employees, including some fifty registered engineers, surveyors, planners and scientists and three registered architects. These design professionals are supported by technicians, designers, drafters, survey and mapping teams and field services representatives. In the last fifty-five years, Alaimo Group designed and provided construction administration services for projects with a total estimated construction value in excess of $10 billion dollars. Alaimo Group, Inc. is an Affirmative Action / Equal Opportunity Employer.

Job Description Residence Inn by Marriott-Wayne, 30 Nevins Road, Wayne, NJ 07470 We are currently looking for an experienced Chief Engineer to join our Team! Our Residence Inn® by Marriott in Wayne, with 118 full suites, is nestled in a peaceful corner of northern New Jersey. When our guests visit William Paterson University or attend a wedding at The Brownstone or The Tides Estate, there’s no closer hotel. Ice . We are an extended stay hotel, and our suites have full kitchens including a fridge, microwave, and utensils. A great place to stay, a great place to work. The Residence Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, Choice Hotel International and Radisson Hotels. The core and heart of our company lies within our dedicated associates, for we wouldn’t be an award-winning company without each and every one of them. A GROWING HOTEL MANAGEMENT COMPANY – COME JOIN US! We value our associates with competitive compensation plans and other benefits and perks. Some of these benefits include: • Weekly pay, • Paid vacation, sick days and holidays, • Medical, dental, vision insurance, • 401K Retirement plan with company match, • Travel discounts on our branded properties The Chief Engineer takes ownership and pride in the maintenance of the property, while fostering the Buffalo Lodging Associates (BLA) culture and values- Excellence, Passion, Integrity, Inclusive. Responsibilities include: • Creating a safe and appealing property by completing routine preventative maintenance on laundry equipment, heating and air conditioning units, ice machines, fire extinguisher, fire and smoke alarms, lawn sprinkler, lawn equipment, exercise equipment and plumbing, • Maintaining work order assignment boards and tracking completed/pending work orders I and following up on all incomplete work orders to inform the requesting guest or department of the status., • Evaluating and selecting quality vendors that are reliable and provide good value for their price, • At least three years of supervisory or lead mechanic experience in a hotel or related field, • Demonstrated general mechanical skills are necessary, • Basic repair, painting, wall covering HVAC, electrical work, plumbing, boiler operation, pool maintenance and general maintenance skills required, • Vocational training is preferred but not required

Job Description Our client in East Hanover, NJ is seeking an onsite Direct Hire Manufacturing Engineer. Salary: 125K Requirements: • BS degree in Mechanical Engineering, Manufacturing/Industrial Engineering, or equivalent., • Over 2 years of experience in a medium/high volume manufacturing environment., • Strong understanding of Continuous Improvement, Six Sigma, 5S, and Lean manufacturing tools., • Comfortable with hands-on interaction with mechanical and electrical components.

Job DescriptionDescription: We are seeking a detail-oriented Applications Engineer to provide calculations and drawings to support project requirements. In this role, you will assist representatives and customers with technical solutions, ensuring project specifications are met efficiently. If you have strong analytical skills and a passion for problem-solving, Responsibilities not limited to: 1. Provides calculations and drawings in support of project requirements • Performs static load and stress analysis including wind and seismic loads, • Size vibration isolators, mounting and installation details, • Performs anchorage and overturning calculations on various types of equipment using seismic guidelines, • Provides seismic/non-seismic restraint cable layouts and calculations for piping and ductwork drawings, • Performs calculations, drawing and layouts, • Assembles engineering recommendation packages for customers and representatives; detailing basis of isolator recommendations in addition to drawing details, as required 2. Provides technical support for reps, customers, and others in the Engineering department. • Answers correspondence from reps, customers, and field contractors for technical support, • Checks transmittal packages in support of Engineering team (NJ, TX, and India) before submission to stamping Engineer for approval, • Proficient in Microsoft Office; experience with ACCESS & Visio a plus, • Strong analytical skills for vibration/shock analysis & isolator recommendations, • Ability to interpret contracts, specifications & equipment cut sheets, • Knowledge of MEP systems, HVAC, electrical, piping, ductwork & controls, • Familiarity with building codes & seismic requirements (IBC, ASCE 7), • AutoCAD proficiency; Excel for designing analytical tools, • Fast-paced, results-driven mindset, • Strong integrity, organization & time management, • BS in Mechanical, Civil, or Structural Engineering, • 2-4 years of seismic experience, • Familiarity with MIL-S-901, MIL-STD-167-1, MIL-STD-810, • PE license preferred At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals

Job DescriptionThis is a temporary 6-month contracted 1099 position with no benefits. Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR LykMhM2Xog

Job Description Technical Outside Sales Engineer – Med / High Voltage - Parsippany, NJ This opportunity is working directly with a successful UK based OEM looking to expand market share in the US providing instruments and consultative services to the critical power industry. They help data centers save money by reducing energy and operating costs and provide solutions for in modernizing their customer's electrical infrastructure. They accomplish this by providing reliability of mission-critical facilities for the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Our client is looking for a Technical Outside Sales Engineer that will generate sales throughout the US, Canada, Latin and South America. The majority of work is focused on opportunities in the USA and Canada. The company utilizes rep firms in defined sales territories in the US and distributors outside the USA. Candidate will need to solve application issues and interpret test results. Candidate will manage all aspects of the sale and will also act as the technical sales contact on sales opportunities. Ideal candidate will possess contacts in the Mission Critical Data Center / Critical Facilities Marketplace. Candidate will help close deals when presented and will be technically supporting Resellers, Rep firms and conducting direct sales with end users in the Enterprise, Colo, and Hyperscale market. The ideal candidate will have knowledge or previous experience selling Critical Power Solutions. The Sales Engineer will also be responsible for preparing proposals - (RFIs, RFPs), PowerPoint / teams presentations, and briefings. Candidate will also be expected to establish positive relationships with existing business partners in hopes to generate additional business. A proven track record of data center product sales skills are a must along with a strong background in electrical power distribution, medium / high voltage switchgear, and substation experience. Responsibilities • Pursuit / Connect / Develop New Business and maintain and grow established clients with Power Engineers in targeted industry focus (Electric Utilities, Critical Facilities, etc.), • Technical Sales calls to leading data center Colos, enterprise and hyper scalers to present Company's Value proposition, • Develop existing sales channels to generate leads, manage customers, RFPs / generate quotes, and close business., • Attend walkthroughs / onsite meetings as required to assess site conditions and develop scopes of work., • Work with sales channels to schedule and visit customers to promote and demonstrate products and services. Assist with all technical aspect of sales calls with Resellers, Rep Firms, etc. with RFP interviews, requirements meetings, etc. until deal is closed, • Taylor demos and specific client sites at various Critical Facilities, Power Utilities, and Industrial Customers, presenting the company's partial discharge instruments along with promoting our asset management software and consulting services., • Provide demo products to customers for presentations and for training seminars, • Interpret electrical drawings, specifications / specs, and apply codes / standards to develop an optimized customized solution, • Collaborate with UK office when needed for RFPs / RFQs / proposals for consulting and services other than instruments: collecting costs, calculating profitability, and writing value propositions with detailed technical and commercial proposals., • Provide technical support for products when customers call, • Conduct lunch and learns while providing products sales and training webinars, • Attend trade shows and arrange booth space at events and conferences to market the company's Critical Power OEM Services as necessary, • Write and present technical papers at conferences and magazine articles, • Perform on-site field work to test MV electrical assets / including collecting the data and writing final report, • Report to the Executive Team regarding company on issues, successes, sales forecasting and technical needs. Maintain rolling forecast in CRM system, • Continually review and revise sales channel performance and adapt where change is needed if needed, • Recruit new sales representatives as needed, • Travel to customer sites (estimated to be approximately 60%) Responsible for scheduling all flights, hotels, etc., • Submit expense reports monthly, • 5+ years' experience in MV (medium voltage) / HV (high voltage) electrical power technical sales, • Detailed knowledge of medium voltage distribution equipment in private networks, • Bachelor's degree in Electrical Engineering or other technically related degree in the industry - a Plus, • 2-5 years of relevant technical sales experience in the data center / critical facilities / critical power / Power Generation industry, • Data Center Products (UPS, Generators, Switchgear, transformers, circuit breakers, arc flash) sales experience, • 2-5 years' experience in the field of Electrical Testing / Electrical Commissioning Sales (medium, and high voltage wire, Relays, electrical power systems equipment including switchgear, transformers, circuit breakers and high voltage wire), • Contacts in – Data Centers / Electrical Utilities: Power Engineers, Energy Marshalls, Facilities Managers, Engineering etc., • Contacts with Partners: Engineering Firms, Electrical Contractors, Data Center Providers, Construction Companies, Commissioning Companies, Rep Firms, etc., • Member / Attendee of local professional chapters / conferences (AFCOM, 7x24, Datacenter Dynamics / DCD, NETA, American Public Power Association (APPA), Electric Power Supply Association (EPSA), IEEE, Bisnow / DICE, International Electrical Testing Association / NETA, etc., • Specific experience in data center power reliability and testing a plus, • Team player and be able to build long-term cooperative partner relationships with internal and external individuals who are part of the business development process, • Effective Communicator-emails, phone, meetings, etc., • Detail oriented individual with excellent written and oral communication and organizational skills, • Ability to work independently / unsupervised / wearing a lot of hats navigating a small office, • Expertise in Microsoft Office applications, especially Word, Excel, PowerPoint, Outlook, and Teams, • Experience with a Customer Resource Management (CRM) system, • Spanish Fluency a plus, • Must have car, valid driver's license, and valid passport, • Ability to travel up to 50% of the time throughout the US After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job DescriptionManufacturing Engineer Needed For Leading Aerospace Manufacturer This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $95,000 - $115,000 per year A bit about us: My client is a leading global designer and manufacturer of high-performance lifting and pulling devices for military and civilian aircraft, including rescue hoists, winches, and cargo hooks. As they continue to grow, they have asked us to help in finding a Manufacturing Engineer tp join their team. Why join us? Excellent Compensation - Base Salary Up To $115,000 • Excellent 401K Program, • 980 Work Schedule, • Tuition Reimbursement Job Details Function: Assists in the planning and developing of production processes, work instructions, build books, tools, fixtures and equipment necessary to manufacture products. Provides reviews of designs and processes for manufacturability and continuous improvement opportunities. Duties: Plans, develops, and implements production methods and cell set-up, including layout, routers and build books for all products including overhaul & repair. Plans and coordinates efforts toward the acquisition of needed equipment and tooling. Develops and maintains production standards. Assists in the troubleshooting of mechanical/electrical problems and test failures. Reviews engineering drawings for manufacturability. Writes engineering change orders as required. Witnesses and evaluates acceptance tests on units to verify both the performance of the product and the accuracy of the test procedure. Reviews designs and processes for continuous improvement opportunities & manufacturability. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.Company DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. CoreWeave is looking for an experienced Senior Network Engineer to join our rapidly growing Data Center Network Engineering Team. In this role, you'll play a critical part in designing, deploying, and managing the data center network that powers CoreWeave's AI, Hyperscale GPU cloud. What You'll Do • Quickly adapt to a rapidly changing environment and learn new emerging networking technologies, • Design and deploy consistent large scale networks rapidly, leveraging automation, • Participate in peer reviews, design discussions, and architectural decisions, • Troubleshoot complex problems and support internal and external customers, • Share your knowledge and guide junior team members, fostering a culture of continuous learning and improvement, • 7+ years of experience as a Network Engineer, • Experience managing Hyperscale Clos fabrics, • Networking OS Experience - Cumulus Linux, Sonic, Arista EOS, Junos, Cisco NX-OS, • Expertise with major routing protocols (BGP, ISIS, OSPF), • Experience with encapsulation protocols (EVPN/VXLAN or Geneve), • Experience automating configuration management (Ansible, SaltStack, home grown), • Familiarity with scripting/programming (Shell, Python), • Operational experience with Git, • Large scale network design, maintenance, and operations, • Experience leading complex projects as part of a team, • Deep understanding of TCP/IP, • College education in Computer Science, Electrical Engineering, • Certifications like CCNA, CCNP, JNCIA What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionProject Engineer - Data Center Construction - Wayne, NJ This opportunity is working directly with a leading mission-critical data center developer / wholesaler / colo provider. This company provides turnkey data center solutions custom-fit to the requirements of their client's ever-changing mission-critical facility's operational needs. They accomplish this by providing reliability of mission-critical facilities for many of the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for a Project Engineer for a Data Center Construction Project. The Project Engineer will be responsible to assist the Onsite Project Manager of the project with all aspects of managing a data center construction project. This will include providing leadership to contractors and vendors associated with the delivery of company projects. Project assignments for the most part will be regional. The candidate will have overall responsibility for the delivery of assigned projects on budget on time and assurance that the project scope and quality meet company design standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back-office work (change orders, budgets, paperwork driven, etc.) Responsibilities: • Maintain liaison with various contractors and vendors in order to manage the day-to-day activities that impact the delivery of company's critical facilities construction projects, • Ensure that all day-to-day project responsibilities are met by the contractors and vendors on the project, • Assist the PM with the management of multiple projects simultaneously when needed, • Assist with creating and managing project schedules, • Assist the PM with project plans – size up, costs, budget, scheduling, timeline, manage change orders, etc., • Assists with reporting and RFPs to Contractors, • Deliver Built to Suit projects with a heavy emphasis on value-engineering, • Drive Company Standards uniformly as it regards to Project Delivery by all project participants on all projects, • Manage financial aspects of contracts (progress billing, rental equipment, income / expenses) to protect the company's interest and simultaneously maintain good relationship with the client, • Represent the company in project meetings, • Act as a Liaison with managers of all company departments, • Maintain all logs required to track the progress of the projectQualifications:, • Experience supporting Data Center Construction Projects as a General Contractor, • Minimum of 2-6 years relevant experience in the Data Center Construction Industry, • Client Facing / Client relationship / Client Management skills., • Must be familiar with the design process of building systems for data center and mission critical projects, • Solid Construction Project Management experience, • Effective Communicator – emails, phone and face to face, • Ability to work independently, • Solid Admin skills, • Experience writing / following MOPs and SOPs for critical MEP systems a HUGE plus, • Experience with Autodesk, REVIT, AutoCAD a HUGE plus, • Computer savvy: MS Project, P6 Primavera, Excel a plus After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Job Summary: The Engineer at Hyatt Place is responsible for maintaining the property’s overall functionality, including the building, equipment, and grounds. This role ensures that all hotel facilities and services operate smoothly and efficiently, providing guests with a safe and comfortable experience. Key Responsibilities: • Preventive Maintenance: Perform routine maintenance tasks on all mechanical equipment, HVAC systems, plumbing, electrical systems, and other hotel assets. Ensure the upkeep of guest rooms, public spaces, and back-of-house areas., • Repair Work: Respond promptly to guest or management requests for repair services. Troubleshoot and repair issues related to plumbing, electrical, HVAC, and other mechanical systems., • Safety and Compliance: Maintain the hotel's safety standards by conducting regular inspections and tests, ensuring that all equipment is in compliance with local, state, and federal regulations. Participate in fire drills and safety programs., • Energy Management: Monitor and control energy usage throughout the hotel, looking for ways to improve efficiency and reduce costs., • Documentation: Keep accurate records of maintenance work, inspections, and repairs. Report any unsafe conditions or equipment that requires replacement., • Vendor Coordination: Work with outside contractors and vendors for specialized repairs or maintenance tasks. Oversee their work to ensure it meets the hotel’s standards., • Team Collaboration: Work closely with the housekeeping and front desk teams to address guest concerns and maintain the overall appearance and functionality of the hotel., • Emergency Response: Be available to respond to emergencies, such as power outages, plumbing issues, or fire alarms. Act swiftly to mitigate any issues., • Education: High school diploma or equivalent required; technical or vocational training preferred., • Experience: Previous experience in hotel maintenance or engineering preferred. Experience with HVAC, plumbing, electrical, and mechanical systems is highly valued., • Skills: Strong problem-solving skills, attention to detail, and ability to work independently. Good communication skills and the ability to interact positively with guests and team members., • Certifications: Relevant certifications (e.g., HVAC, EPA) are preferred. The role may require working varied shifts, including nights, weekends, and holidays, depending on the hotel's needs. Requirements • A degree in a relevant field such as mechanical, electrical, or industrial engineering., • Proven experience in a manufacturing facility as a maintenance engineer or in a similar role., • Strong analytical and problem-solving skills., • Knowledge of electrical systems and the ability to use a multimeter, including high and low voltage systems., • Basic welding skills., • Excellent communication and customer service skills., • Ability to work independently and as part of a team., • Physical stamina to perform tasks in a fast-paced environment. Benefits: • Competitive salary, • Health and dental insurance, • Paid time off, • Employee discounts at Hyatt properties, • Opportunities for career advancementCompany DescriptionWe are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.We are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.

Education: BA or BS degree in Quality, Industrial, Electrical, Mechanical Engineering ASQC Quality Engineer Certification a plus. Job Summary: As a Quality Engineer, you will work cross-functionally with Engineering, Operations, Suppliers, and Customers. Review and approve quality document changes

Associate, Electrical Engineer.L3Harris Technologies is the Trusted Disruptor in the defense industry.With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national securi

This Test Engineer position is responsible for being the lead in development of test methodology and test plan development supporting software and hardware verification and validation testing for a medical device, including improvements and executing.

The technician will work closely with both the mechanical and electrical maintenance operations teams to ensure safe and reliable plant operations.

Bachelor’s degree in industrial, electrical, or a related engineering discipline from an accredited institution. A track record of leading engineering teams to success. Sr Test Engineer – Regulatory & Agency Compliance.

A National General Contractor specializing in commercial projects, from full build outs and renovations to large scale projects is seeking a talented Assistant Project Manager to help assist with new and existing construction.This position is based out of their office in Union County, NJ.Benefits +

Associate degree in industrial, electrical, or a related engineering discipline from an accredited institution. A bachelor's degree in industrial, electrical, or a related engineering discipline from an accredited institution. We're seeking a forward-thinking Senior Test Engineer at our Fire Safety

Bachelor’s degree (Engineering or Construction Management preferred).

BS/MS degree in Computer Science, Engineering or related field.

Mechanical Engineers (Junior & Senior). Hands-on engineering approach with knowledge of GD&T, DFM/DFA, prototyping, and testing. BS in Mechanical Engineering (or related).

Read electrical circuits to determine basic electrical requirements. Present results to engineer for sign off. Through precision-engineered measurement solutions, we work with our customers to eliminate the barriers between inspiration and realization of world-changing technologies.

JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. Assisting in managing multiple concurrent engineering projects and aligning resources to mee

Connects electrical systems to powerlines to provide electricity to the building. Installs conduits and pipes to house electrical wires and cables. Ensures piping complies with electrical codes.

Bachelor's Degree in electrical Engineering or a related field. Experience in electrical engineering, applications, or project management. Coordinating with other engineers, architects, and contractors to ensure the seamless integration of electrical systems.

Small Electrical Contractor looking for electrician with a minimum of 4 years experience. Years of Residential/ Light Commercial Electrical Construction Experience.

Bachelor’s degree in Construction Management, Civil/Architectural Engineering, or related field preferred; equivalent industry experience considered.

Performing grounding and bonding of electrical systems to prevent electrical shock hazards. Installing and maintaining electrical distribution systems, including transformers and distribution boards. Conducting thorough electrical inspections and ensuring all work rigorously complies with the.

Bachelor’s degree in Construction Management, Civil Engineering, Architecture, or related field preferred.

Maintenance Technician, Multifamily Sofi Lyndhurst.The Maintenance Technician provides support and is accountable for delivering on our commitments to our residents.This includes quality move-ins, residential satisfaction, expedited service, and personal attention to the resident.The Maintenance Tec

Do not apply if you can't work on site 2 days per week or travel domestically.We are seeking a Digital Project Manager to join our dynamic team specializing in.This is an exciting opportunity for a sharp, quick learner with strong organizational skills and an interest in interactive, mobile, and mul

We are looking for a highly organized and motivated professional with experience in project management, construction, or electrical contracting. Prior experience in project management, electrical contracting, or construction management. Knowledge of EV charging infrastructure and electrical systems

Per Se Group has an outstanding and unique full-time job opportunity for a Project Architect to work with our premier developer client in New Jersey.In this role, you will help support commercial construction and design projects.Examples of the type of projects you will work on include medical offic

Singer Equipment Company, is not just a seller of food equipment we cultivate partnerships and amplify success.Singer isn't just a place to work; it's a place to thrive.We empower our employees, fostering an environment where they can grow professionally and contribute to something larger than them

Mechanical Engineers (Junior & Senior). Hands-on engineering approach with knowledge of GD&T, DFM/DFA, prototyping, and testing. BS in Mechanical Engineering (or related).

Carpentry, electrical, HVAC, plumbing, and you! These are some of the most important things we need to maintain our properties and keep our residents happy. Diagnose and make repairs in such areas as, but not limited to: appliances, carpentry, hardware accessories, masonry, painting, basic electrica

Do not apply if you can't work on site 2 days per week or travel domestically.We are seeking a Digital Project Manager to join our dynamic team specializing in.This is an exciting opportunity for a sharp, quick learner with strong organizational skills and an interest in interactive, mobile, and mul

Under general supervision, Maintenance Tech III repairs and maintains the fiber and coaxial transport and distribution cable services including residential and business video, data, telephone, and security.As needed supports repair and maintenance of headend electronics and critical infrastructure e

Minimum of 4+ years of engineering project management experience. Experience working with external contractors and internal engineering teams. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, l

The candidate must be flexible, client focused and capable of working independently, while supporting a team that includes engineers, scientists, and field personnel. Assigns tasks to engineers, scientists, technicians, or administrative staff. BS in Environmental Engineering or related field.

A National General Contractor specializing in commercial projects, from full build outs and renovations to large scale projects is seeking a talented Assistant Project Manager to help assist with new and existing construction.This position is based out of their office in Union County, NJ.Benefits +

Skill: Medical Device Design Controls, Design Verification & Validation Experience: 8~9 years Education: B.Adept with Design Control process for Medical Devices.Led Change Qualification projects for Medical devices, working with multi-cultured CFT.Strong Communication (written & verbal) and Leadersh

Bachelor’s degree in Construction Management, Civil Engineering, Architecture, or related field preferred.

General knowledge of HVAC and/or electrical equipment.

We are seeking a highly driven Project Manager with a strong background in Consumer-Packaged Goods (CPG) to lead innovation initiatives and oversee new product development from concept through commercialization.This role requires a proven leader who thrives in a fast-paced, evolving environment, enj

General knowledge of HVAC and/or electrical equipment.

Mechanical Engineers (Junior & Senior). Hands-on engineering approach with knowledge of GD&T, DFM/DFA, prototyping, and testing. BS in Mechanical Engineering (or related).

Plumbing, Electrical, HVAC-R, Mechanical experience. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. Provides fleet maintenance support inc

Bachelor’s degree in Construction Management, Civil/Architectural Engineering, or related field preferred; equivalent industry experience considered.

CGMP Implementation Project Management.Project Management Program Duration: 9-12 Months Location: East Hannover, NJ (Hybrid) (3x in Office).This project involves the management and execution of approx.Good Manufacturing Practices (cGMP) for implementation.The timeline for completion is critical, wit

Are you ready to take the next step in your career as a Project Manager? Astrix is partnering with a client in the sports nutrition manufacturing sector to identify a proactive, hands-on Project Manager to lead cross-functional initiatives and ensure the successful execution of key projects.Serve as

Senior Environmental Project Manager.Dewberry is currently seeking a Senior Environmental Project Manager to join the NE environmental group in our Parsippany, NJ office for large scale transportation projects.The ideal applicant must be flexible, client focused, and proficient in the transportation

The technician will work closely with both the mechanical and electrical maintenance operations teams to ensure safe and reliable plant operations.

Senior Environmental Project Manager.Dewberry is currently seeking a Senior Environmental Project Manager to join the NE environmental group in our Parsippany, NJ office for large scale transportation projects.The ideal applicant must be flexible, client focused, and proficient in the transportation

Experience in electrical engineering, applications, or project management. Coordinating with other engineers, architects, and contractors to ensure the seamless integration of electrical systems. Bachelor's Degree in electrical Engineering or a related field.

CCE Project Management Services Location: East Hanover, NJ Duration: 8 Months.Supplier will provide project management services for US medical operations in support of projects and forecast spend for various brands, budget accuracy and alignment, purchase order management, payment resolution, and mo

Bachelor’s degree (Engineering or Construction Management preferred).

Artech is currently looking for an experienced professional for the position below.Location: Whippany NJ, Hybrid Duration: 6-12 Months.Job Description: High Level JD: The profiles have experienced and skilled in project management which involves Change Management, Budgeting and Forecasting, Financia

Citizen with the ability to communicate clearly in English.Only local NJ/NYC area people will be considered.Must reside within commuting distance of the East Hanover New Jersey area.This is a Field Service position with a company vehicle, so a good driving record is required.Questions (YES or NO ans

About Kyyba: Founded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting services, enabling businesses to effectively respond to organizational changes and technological advances.At Kyyba, the overall well-being of

Citizen with the ability to communicate clearly in English.Only local NJ/NYC area people will be considered.Must reside within commuting distance of the Whippany New Jersey area.To qualify for this position you need to have experience with Panel Wiring, PLCs.HMI, Motor Drives, Control Systems, Varia

Location: Franklin Lakes, NJ - REMOTE.Agile/JIRA SAP Project Manager - BD BRIM Phase 0.Manage overall PM activities, using for planning MPP, be a certified PMM, experience doing project using Jira tool for PMO and Confluence experience.

Citizen with the ability to communicate clearly in English.Only local NJ/NYC area people will be considered.Must reside within commuting distance of the East Hanover New Jersey area.This is a Field Service position with a company vehicle, so a good driving record is required.Questions (YES or NO ans

Manage projects following project processes and where applicable provide direction to assisting Project Engineers.

Bachelor’s degree in Construction Sciences, Mechanical Engineering or similar engineering degree is required. The company has developed into one of America's premier Mechanical Construction and Facility Services companies serving clients through the full life-cycle of a facility, to include en

To manage change projects that help the organisation achieve its strategic objectives, while ensuring that projects are delivered on time, within budget, in control and in compliance with regulatory requirements and internal policies and procedures.Management of change projects within the organisati

Bachelor’s degree in Construction Sciences, Mechanical Engineering or similar engineering degree is required. The company has developed into one of America's premier Mechanical Construction and Facility Services companies serving clients through the full life-cycle of a facility, to include en

Program Manager/Project Manager Skill Medical Device Design Controls, Design Verification & Validation.Title: Program Manager/Project Manager Skill Medical Device Design Controls, Design Verification & Validation.

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market.

Remote to start Location: Franklin Lakes, NJ Position Type: C2H Rate: DOE Start date: ASAP US Citizens and Green Cards, GC-EAD, TN VISA accepted.Description 7-10 years of professional software development/production support experience Development experience in python, spark and unix shell-scripting

PCM Lead for Confections Cluster.Are You Ready to Make It Happen at Mondel?z International? Join our Mission to Lead the Future of Snacking.Do you have a passion for sweet success? This is your chance to drive impact at the heart of our most beloved treats.As the PCM Lead for the Confections cluster

Are You Ready to Make It Happen at Mondel?z International? Join our Mission to Lead the Future of Snacking.We are looking for a bold, high-performing Senior Product Change Manager to shape and drive the delivery of one of the most iconic portfolios in the Biscuits world: Oreo, Chips Ahoy, Belvita, N

You will be part of our R&D Engineering Pilot Plant team supporting innova.

Manage value engineering efforts.

Degree in Engineering, Architecture or Construction Management. Act as the main point of contact between clients, engineers, architects, and other stakeholders.

CoreWeave is seeking a highly skilled and motivated Systems Automation Engineer to join our Kernel HAVOCK Team, reporting to the Manager of Systems Engineering. CoreWeave Systems Automation Engineer. You will collaborate closely with cross-functional teams, upstack engineering teams, and stakeholder

We work directly with building owners, business owners/managers, or as consultants to other design professionals in surveying, assessing, planning, engineering, designing, constructing, commissioning, implementing, maintaining, monitoring, and managing tena.

We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. We have a team of 40-50 employees, including a full staff of MEP/Structural/Civil engineers. Actalent is a global leader in engineering

Help review drawings, plans, and specifications to support value engineering efforts. Bachelor's degree in Construction Management, Engineering, Architecture, or related field preferred.

Bachelor's Degree in Mechanical or Biomedical Engineering with 4+ years of experience in medical device or other regulated industry, OR an Advanced Degree in Mechanical or Biomedical Engineering. Graduate degree (MS or PhD) in Mechanical Engineering, Biomedical Engineering, or similar field. We are

Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle from advisory, planning, design and engineering to program and construction management. We invite you to bring your bold ideas and big dreams and beco

What does a Restoration Project Manager with Paul Davis do?.Sign projects once estimates are approved.Discuss work to be done with customer and make any changes or additions to estimate.Create contracts with payment schedules and collect payments when due.Help customer with material selections if ne

Assist in planning, coordinating, and managing construction projects from start to finish.Support project schedules, ensuring all milestones and deadlines are met.Monitor budgets and provide updates on financial progress to stakeholders.Collaborate with contractors, vendors, and internal teams to ma

Job Title: Senior Associate, Systems Engineer Job Location: Clifton, NJ Job Description: Perform operational analysis and develop concept of operations, design and implementation plans Develop test plans, procedures & cases Conduct tests and document results Use software tools, scripting and softwar

AECOM's Energy practice provides a wide range of services from consulting and engineering design to energy engineering, energy procurement and construction (EPC) for power, energy efficiency, and renewable energy clients. EIT or PE license in either Electrical or Mechanical Engineering or similar fi

Fire, Electrical, or Security systems. Preferred: Certificate or diploma in a related field (Fire & Life Safety, Electrical/Electronic; Security).

Fire, Electrical, or Security systems. Certificate or diploma in a related field (Fire & Life Safety, Electrical/Electronic; Security).

Bachelor's Degree in Construction Management, Civil Engineering, or related field. Strong civil engineering knowledge, particularly in concrete footings, foundations, precast walls, and structural steel.

Takes direct accountability for project delivery for cross-team projects.Manage project start to finish, inclusive of scope, schedule, cost, and deliverables.

POSITION SUMMARY: The Project Engineer assists the Project Manager/ Executive by tracking and maintaining records that are associated with submittals, costs, deliveries and payroll at the job site. The Project Engineer is also responsible for tracking and maintaining all safety communications, manua

Manage projects following project processes and where applicable provide direction to assisting Project Engineers and Field Engineers.

We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the wo

Professional Engineer (PE) license in New Jersey. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle from advisory, planning, design and engineering to program and construction management. We invite yo

At NTT DATA, we know that with the right people on board, anything is possible.The quality, integrity, and commitment of our employees have been key factors in our company's growth and market presence.By hiring the best people and helping them grow both professionally and personally, we ensure a bri

Demonstrated cross-functional capability; experience working in or with other business disciplines such as Accounting, Human Quality Assurance, Manufacturing, or Engineering.

Civil Engineering or Structural Engineering (M. NV5 is seeking a motivated and technically proficient Project Manager with 812 years of experience in structural engineering to join our growing Parsippany office. Manage design and delivery of bridge and structural engineering projects for transportat

Experience in transportation engineering, including inspection and/or design for freight rail or passenger transit facilities. Dewberry is seeking a Senior Rail Project Engineer. Candidate must have a BS degree in Civil Engineering and a minimum of 10 years of civil and rail design experience.

Dewberry is looking for a Traffic Engineer with a BS in Civil Engineering, and at least 5 to 10+ years of experience in transportation/traffic engineering to provide support in the NY/NJ metropolitan area. This is an excellent opportunity to lead, mentor, and be part of a growing team of traffic eng

We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the wo

Water/Fire Damage Project Manager.Paul Davis Restoration of Metro NY/NJ is hiring a Water/Fire Damage Project Manager to help homeowners and businesses rebuild after fire, water, wind, and other damage.If you're passionate about making a real difference in restoring properties and helping others, we

You'll work with peers on other water/wastewater practitioners throughout the company to manage a range of civil engineering projects for both public sector utility and private clients (water and wastewater). Lead and facilitate engineering design staff. Bachelor's Degree in Civil Engineering or rel

Responsible for the interior design, space planning, construction management, maintenance and operations of all company facilities and grounds, leased and owned.Develops, manages and tracks facilities capital and facilities operating expense budgets and establishes long-range facilities strategic pl

A civil project engineer is responsible for designing, planning, and managing construction projects, ensuring that all aspects align with technical specifications, local regulations, and safety standards. Possesses a deep understanding of engineering principles, codes, and regulations.