Trabajos electrical engineer en Miami, FLCrear alertas

Additional Information Job Number25135994 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25135994 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25135994 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25135994 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25140929 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25140929 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25140929 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25140929 Job CategoryEngineering & Facilities LocationThe St. Regis Bal Harbour Resort, 9703 Collins Avenue, Bal Harbour, Florida, United States, 33154___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job Description Schedule: Sunday-Thursday; 8:00AM - 5:00PM The Maintenance Technician position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description • Bilingual (English/Spanish) Schedule: Tuesday - Saturday 7am to 3pm. The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipments to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will conincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Schedule: Full-Time Monday- Friday, 9:00 a.m. - 5:30 p.m., $19-$20 per hour depending on experience. The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Performs routine maintenance on building interior and exterior., • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations., • Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required., • Assist in maintaining records of scheduled maintenance procedures. Work Environment The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property.

Job Description *Bilingual (English/Spanish) Schedule: Tuesday - Saturday 7am to 3pm. The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipments to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will conincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs common area grounds keeping and assists with preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the General Manager/Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • May contact and schedule vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system and property work log sheets., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipments to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 50 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Monday- Friday 8:00AM- 4:00PM Position Supervision Employee reports directly to the General Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipments to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description This job description serves as a guide for establishing the criteria to fill a specific job, and to assist in employee evaluation related to that job. The description is subject to change at management's discretion and may include additional or different duties as assigned or directed. Join our dynamic Engineering team at Carillon Miami Wellness Resort as a General Maintenance Technician! In this role, you’ll play an essential part in maintaining and enhancing our world-class resort facilities, working hands-on with technical equipment to ensure everything runs smoothly. You’ll bring professionalism, technical skills, and a commitment to safety to every task, from preventive maintenance to emergency responses. If you’re a skilled team player with experience in hotel or facility maintenance, excellent communication skills, and a can-do attitude, we’d love to meet you! Start your career journey with us at Carillon Miami! I. Job Summary Under the direction of the Director of Engineering, the Maintenance Tech worker engages in the work and activities that repair and maintain all of Carillon Miami Wellness Resort facilities. Also performs preventive maintenance work that could involve the use and operation of technical equipment and techniques. Exhibits sound decision-making skills, productivity, and professionalism. II. Essential Job Functions A. Adheres to Carillon Miami Wellness Resort Service Standard when assisting guests, patrons, and owners. B. Comply with all Departmental rules, regulations, standards, dress code and appearance. C. Behave in a professional manner and demonstrate a friendly and caring attitude toward co-workers. D. Show prompt responsiveness when asked to do any task consistent with Carillon standards. E. Required to always wear personal protection equipment. F. Personally, learn and comply with the Federal, State, Local, Hotel and Departmental Safety Regulations and Procedures. G. Adhere to Carillon Miami Wellness Resort Lock out Tag Out policies and procedures. H. Promote guest, patron, owner and employee safety and security through strict adherence to Facility Security and Safety policies and procedures. I. Does not engage in, nor allows others on the staff to work in a hazardous manner or under hazardous conditions. J. Works to eliminate hazards and or safety violations. K. Know and be able to execute the proper shut-down and start-up procedures for all utilities. L. Responds efficiently to emails, Hotsos orders and Radio calls while adhering to Carillon Miami Wellness Resort Service Standards while assisting guests, residents and TCM members . M. Maintain knowledge of major and emergency equipment locations such as fire detection, fire suppression, emergency generator, departmental fire drill/response pro-cedures, emergency HVAC operation, gas and water shut off valves, main electrical disconnects etc. N. Complete Preventive Maintenance work, including the monitoring, control, and performance of scheduled Preventive Maintenance on all systems. O. Records and preforms daily readings of machines at Central tower, North Tower and South. P. Perform Daily productivity report for property record. Q. Assures the maintenance of parts and inventory of parts needed for the department. R. Maintain and control the tool Inventory to include proper securing, storage, use and function. S. Engineer workers are actively involved in the repairs and maintenance of the Facility and the conditions, equipment and devises therein. T. Maintenance engineers set an example in productivity and professionalism consistent with their education, experience, skills, and abilities. U. Log into Hotsos system daily and complete pending orders, with prioritization of assigned work. V. Originate work order to remedy problems and or faulty conditions and ensure the quality and timeliness of the remedial work. W. Maintains open and professional communication between management and staff. X. Read, write and communicate instructional and other technical terms that are consistent with the job requirements of a Maintenance engineer. Y. Support the facility’s Hazard Communication Program. This includes a thorough knowledge of Material Safety Data Sheet, product labeling, storing, and handling of materials etc. Z. Assists in execution and quality of the work assigned to the facilities maintenance team. AA. Inspect All common areas in all the towers on daily basis for proper operation and condition. BB. Perform Power wash weekly in all common areas. CC. Assists in the motivation of employees toward the attainment of reasonable work goals. DD. Provides feedback regarding quality and work conditions not meeting Carillon standards. EE. Performs other job-related duties as directed. III. Education, Experience and Skill Requirements A. Minimum of 1 year experience in a hotel/resort or directly related industrial or facility maintenance. B. Proven leadership skills. C. Must possess good communication and organizational skills with the ability to work with a variety of people. D. The ability and experience to safely use power equipment and hand tools necessary to accomplish repairs and maintenance work. E. Must possess sufficient stamina to work under all types of weather conditions and to lift, carry, push, and/or pull a variety of tools, equipment, and materials. F. Physically capable of performing rigorous tasks including working from ladders, working beneath equipment, and in various conditions and settings are required for the normal performance of assigned tasks. G. Must be able to work a flexible schedule including holidays and weekends. H. Possession of a valid Florida driver license. Carillon Miami Wellness Resort is an Equal Opportunity Employer

Job Description Job Summary Under the direction of the DOE and/or the Chief Engineer, the General Maintenance Tech Lead engages in the work and activities that repair and maintain all of Carillon facilities. Performs preventive maintenance work that could involve the use and operation of complex and highly technical equipment and techniques. Exhibit sound decision making skills and be an example in productivity and professionalism. Does not engage in, nor allow others on the staff to work in a hazardous manner or under hazardous conditions. Essential Job Functions • Leads crew members in the repairs and maintenance of the Engineering and the conditions, equipment, and devices therein. Sets an example in productivity and professionalism., • Completes Preventive Maintenance work, including the monitoring, control, and performance of scheduled P.M. on all systems. This activity includes work discovered by the General Maintenance Tech Lead., • Trains other maintenance staff members in the proper performance of P.M. tasks., • Serves as a departmental role model or mentor by working alongside employees to perform technical or functional job duties., • Assists management in establishing and communicating goals, performance expectations, timetables and deadlines for shift or departmental operations to nonexempt staff and ensures that they are understood, • Assists in planning, execution and the quality of the work assigned to the Facilities Maintenance team., • Assists management the selection, training, scheduling, evaluating, counseling, disciplining, and motivating staff members toward the attainment of reasonable work goals., • Maintains open and professional communication between management and staff. Follows procedures in the use and maintenance of all communication equipment and devices., • Ensures all activities, work, actions, and time are documented in writing on a daily basis., • Supports the HotSOS work order system in implementation and adherence, including the prioritization of assigned work. Originates work orders to remedy problems and/or faulty conditions and assures the quality and timeliness of the remedial work., • Coordinates tasks and works with other departments to ensure that the department runs efficiently., • Assists management to ensure that staff members have the necessary resources to effectively perform their duties (e.g., supplies, equipment), • Ensures the maintenance of a working parts inventory of all parts needed for the department., • Maintains knowledge of vendor and pricing policies & procedures., • Maintains and control the Tool Inventory to include proper securing, storage and training in the proper use and function of the tools., • Personally, complies and teaches compliance to co-workers regarding Federal, State, Local, Hotel and Departmental Safety Regulations and Procedures., • Adheres to the Carillon Engineering Lock and Key policies and procedures., • Promotes guest, patron, owner and employee safety and security through strict adherence to Engineering Security and Safety policies and procedures. Eliminates hazards and/or safety violations. Knows and is able to teach the proper shutdown and start-up procedures for all utilities. Thorough knowledge of the fire suppression systems and the fire/emergency alarm systems., • Be knowledgeable of all major and emergency equipment locations and their functions including Life and Property systems (fire detection, fire suppression, emergency generator, departmental fire drill/response procedures, emergency HVAC operation, gas, and water shut-off valves, main electrical disconnects, etc.)., • Supports the facility’s Hazard Communication Program. This includes a thorough knowledge of SDS, product labeling, storing and handling of materials etc., • Responsible for PPE (personal protection equipment) use and daily maintenance., • Follows all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications., • Sets an example in fulfilling Carillon PJICAAN Service Standards for service to guests, patrons, and owners., • Complies with all Departmental rules, regulations, standards, dress code and appearance., • Reviews all staff and department bulletin boards and strictly adheres to Carillon policies and procedures regarding confidentiality and communication of information., • Performs other job-related duties as directed.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The Maintenance Technician position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine maintenance on building interior and exterior. • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations. Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipments to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required. The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property. Travel No travel is expected for this position. Required Education and Experience • Minimum two (2) years general experience in building trades, repair and replacement maintenance or handy-work., • Must have the ability to react and address all emergency situations in a timely manner (within 30 minutes). May be called on afterhours for emergencies. Will be required to tend to the emergency at the property if called upon in a timely manner., • Effective written and verbal communication skills., • Additional trade experience and certifications may be required at some locations. Position Supervision Employee reports directly to the Chief Engineer/Maintenance Supervisor of the community. If there is no Chief Engineer or Maintenance Supervisor at the site, then employee will report to the Property Manager. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description The maintenance position, under limited supervision, performs work of routine difficulty. Performs preventative maintenance and repair of all mechanical systems and equipment of the building interior and exterior under the supervision of the Chief Engineer/ Maintenance Supervisor. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Performs routine maintenance on building interior and exterior., • Contacts and schedules vendors and contractors for necessary building repairs and emergencies that are outside the scope of routine maintenance., • Maintains a schedule of when maintenance has been performed and when next service is due., • Works in a safe manner and recognizes unsafe situations., • Takes appropriate action to ensure safety of themselves and others in building., • Maintain an operating environment to achieve a satisfactory level of Resident’s service., • Adhere to the preventative maintenance program for the Community., • Perform minor maintenance replacement and repair in areas of carpentry, electrical work, AC, plumbing, mechanical, painting, flooring, and other minor building repairs through daily work orders as long as a permit is not required to conduct the job., • Complete all required forms and work orders using KWPMC work order system., • Perform casual labor, such as lifting/moving heavy items as directed by Chief Maintenance Engineer/Property Manager following appropriate safety procedures., • Routinely inspect building mechanical systems/equipment to ensure proper performance and maintenance., • Monitor and adjust controls that regulate building systems, such as air conditioning, boilers, etc., • Routinely inspect common areas to ensure they are maintained clean and in a aesthetically appealing condition., • Report all problems, including items that may not be in list of responsibilities to the CE or Maintenance Supervisor., • Maintain assigned equipment in good working condition., • Observe all State, Federal and Company safety standards/precautions while performing task in order to maintain a safe work environment., • Properly utilize new equipment and follow safety procedures prior to using this equipment., • Respond to emergency maintenance requests as required., • Assist in maintaining records of scheduled maintenance procedures. Work Environment The position will require for the employee to work indoor and outdoors. The position will be located at a property where people reside. Noise level may be moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to walk through out the majority of their shift. The position will require the employee to sit, stand, reach, lift, bend, kneel, stoop, climb, push and pull items weighing 30 pounds or less. The position requires manual dexterity; auditory and visual skills; and the ability to follow written and oral instructions and procedures. Position will require employee to climb stairs, climb ladders, work at heights above ground, be able to detect auditory and/or visual emergency alarms. Noise level in the work environment is usually moderate but can be loud on occasion. Position Type/Expected Hours of Work This is a non-exempt (hourly) position. Days and hours of work will be set by the property and will coincide with the hours of the association. This schedule may change to accommodate the business needs of the property.

Job Description Job Summary Under the direction of the Director of Engineering, HVAC Technician engages in the work and activities that repair and maintain all of Carillon Miami Wellness Resort facilities. Performs preventive maintenance work that could involve the use and operation of complex and highly technical equipment and techniques. Exhibit sound decision making skills and be an example in productivity and professionalism. Do not engage in, nor allow others on the staff to work in a hazardous manner or under hazardous conditions. Essential Job Functions • Set an example in fulfilling Carillon Standards for service to guests, patrons and owners., • Comply with all departmental rules, regulations, standards, dress code and appearance. Behave in a professional manner and demonstrate a friendly and caring attitude toward co-workers. Show prompt responsiveness when asked to do any task consistent with Carillon standards., • Personally comply and teach compliance to co-workers regarding Federal, State, Local, Hotel and Departmental Safety Regulations and Procedures., • Adhere to Carillon Facility Lock and Key policies and procedures., • Promote guest, patron, owner and employee safety and security through strict adherence to Facility Security and Safety policies and procedures. Eliminate hazards and/or safety violations. Know and be able to teach the proper shut-down and start-up procedures for all utilities. Thorough knowledge of the fire suppression systems and the fire/emergency alarm systems., • The HVAC Technician must become knowledgeable about all major and emergency equipment locations and their functions including Life and Property systems (fire detection, fire suppression, emergency generator, departmental fire drill/response procedures, emergency HVAC operation, gas and water shut off valves, main electrical disconnects, etc.)., • Complete preventive maintenance work, including the monitoring, control and performance of scheduled P.M. on all systems. This activity includes work discovered by the lead engineer. Train other engineers in the proper performance of P.M. tasks., • Responsible for PPE (personal protection equipment) use and daily maintenance., • Assures the maintenance of a working parts inventory of all parts needed for the department. Knowledge of vendor and pricing policies & procedures. Maintain and control the tool inventory to include proper securing, storage and training in the proper use and function., • Leads crewmembers in the repairs and maintenance of the Facility and the conditions, equipment and devises therein. HVAC Technician set an example in productivity and professionalism., • Support the HotSOS work order system in implementation and adherence, including the prioritization of assigned work. Originate work orders to remedy problems and/or faulty conditions and assure the quality and timeliness of the remedial work., • Maintains open and professional communication between management and staff. Follow procedures in the use and maintenance of all communication equipment and devices. Review all employee and department bulletin boards and strictly adhere to Carillon policies and procedures regarding confidentiality and communication of information., • Read, write and communicate instructional and other technical terms, details and concepts in the English language, that are consistent with the job requirements of a HVAC Technician., • Support the facility’s Hazard Communication Program. This includes a thorough knowledge of MSDS, product labeling, storing and handling of materials etc., • Assists in planning, execution and the quality of the work assigned to the Engineering Maintenance team., • All activities, work, actions and time are documented, in writing, on a daily basis., • Assists in the motivation of employees toward the attainment of reasonable work goals., • Provides feedback regarding the quality and productivity of department workers., • Through individual effort and teamwork, employees will ensure that all guest, patron and owner contact is handled in a friendly and professional manner. We will be sensitive and responsive to their reasonable needs and requests while exhibiting gracious hospitality and personal care., • Minimum of 4 years experience in a hotel/resort or directly related industrial or facility maintenance., • Proven leadership skills., • Be an Expert and have “Journeyman” certifications in two or more Facility Engineering disciplines and proficiency in all other aspects of engineering maintenance, as directed by management., • Must possess good communication and organizational skills with the ability to work with a variety of people., • The ability and experience to safely use power equipment and hand tools necessary to accomplish repairs and maintenance work., • Must possess sufficient stamina to work under all types of weather conditions and to lift, carry, push, and/or pull a variety of tools, equipment and materials., • Physically capable of performing rigorous tasks including working from ladders, working beneath equipment, and in various conditions and settings are required for the normal performance of assigned tasks., • Must be able to work a flexible schedule including holidays and weekends., • The HVAC Technician must have current certifications and/or credentials to perform their specialty skills and disciplines. Such as a CFC., • Possession of a valid Florida driver license.

Job Description The Gale Hotel South Beach is looking for an experienced and dynamic Maintenance Specialist to join our maintenance team. As an Engineer/Maintenance Specialist you will be responsible for maintaining the general condition of the property with regards to all aspects of basic electrical, carpentry, plumbing, mechanical and painting work. You will complete maintenance request work orders from all departments on a timely basis. You will participate in the preventive maintenance program for all-building equipment and rooms and complete other special projects assigned periodically by the Director of Engineer. ESSENTIAL FUNCTIONS: * Perform general repairs and services in all maintenance related disciplines, including but not limited to; carpentry, mechanics, plumbing, electrical, finish work, HVAC/refrigeration etc. * Prioritize work orders through urgent requests and established hotel area down times in order to minimize inconveniencing guests. Effectively interact with department managers is required. * Respond to guest room calls as required. * Complete any and all assigned preventative maintenance procedures Other: Regular attendance in conformance with the standards, which may be established from time to time, is essential to the successful performance of this position. Employees with irregular attendance will be subject to disciplinary action, up to and including termination of employment. Due to the cyclical nature of the hospitality industry, employees may be required to work varying schedules to reflect the business needs of the hotel. In addition, attendance at all scheduled training sessions and meetings is required. Upon employment, all employees are required to fully comply with Menin rules and regulations for the safe and effective operation of the hotel’s facilities. Employees who violate hotel rules and regulations will be subject to disciplinary action, up to and including termination of employment. SUPPORTIVE FUNCTIONS In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the manager based upon the particular requirements of the hotel: * Adhere to hotel safety standards. * Perform other duties and handle projects as assigned by Manager. * Assist other departmental craft workers as required. * Perform all duties required as Fire Alarm Response Team. * Participate in OSHA/Safety programs within the hotel through awareness in every day job functions and participate on the Hotel’s Emergency Evacuation Team. SPECIFIC JOB KNOWLEDGE, SKILLS AND ABILITIES The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills, and abilities: * Must be able to work well with all members of the Engineering Department and all other members of the Hotel Staff. * Must promote a cordial and caring attitude toward all other department heads. * Highly motivated self-starter. * Experience in all phases of mechanical/electrical/plumbing systems. * Appropriate technical schooling * Blueprint reading. * Ability to communicate with hotel guests QUALIFICATION STANDARDS Education High school or equivalent education required. Experience Must have a minimum of three years hands-on experience working on electrical, painting, plumbing and HVAC/refrigeration repairs.

Job DescriptionSenior Mechanical Engineer – MEP Design Orlando, FL or Miami, FL | Full-Time Position Overview We’re hiring a Senior Mechanical Engineer to lead the design and execution of complex building systems for a multi-disciplinary MEP consulting firm—not a product manufacturer or OEM. This is a client-facing, project-driven position focused on designing and delivering HVAC systems for commercial, institutional, healthcare, and laboratory facilities. You'll mentor junior staff, collaborate across trades, and drive projects from concept through construction. Basic Qualifications • 10+ years of mechanical engineering experience in a consulting/MEP firm, • Strong HVAC systems design expertise (chillers, AHUs, VAVs, etc.), • Skilled in HVAC load calculations, life cycle cost analysis, and system modeling, • Proficient with AutoCAD and Revit, • Excellent communication and team leadership skills, • Experience coordinating with architects, structural, electrical, and other disciplines, • Working knowledge of applicable building codes and standardsPreferred Qualifications, • PE license preferred (or ability to obtain), • Experience with energy-efficient and sustainable building systems, • Familiarity with healthcare or laboratory mechanical systems, • Knowledge of building automation system integrationKey Responsibilities, • Lead mechanical engineering projects from design through construction, • Design chilled water systems, hydronic loops, ventilation, and VAV systems, • Perform load calculations, life cycle analysis, and HVAC modeling, • Prepare and review technical drawings, specs, and construction documents, • Mentor junior engineers and oversee design quality, • Coordinate with in-house and external architects, electrical, plumbing, and structural teams, • Ensure code compliance and project documentation throughoutWhat Makes This Role Stand Out, • Career Growth: Defined paths toward increased responsibility and compensation, • Stability: Established MEP firm with steady project pipeline and loyal client base, • Supportive Culture: Work alongside experienced engineers in a collaborative team environment

Job DescriptionAs THE leader in transit technology, Clever Devices' vision is to make meaningful contributions to worldwide mobility. Our goal is to be the leading provider of exciting technology that improves the quality of mobility in communities around the world. The Project Engineer I is responsible for leading the deployment of complete Systems that include Clever Devices products combined with complementary technologies, including deployment of hardware products and interfaces, to provide a holistic solution that meets customer requirements. The Project Engineer I works closely with the Project Engineer II, the Systems Engineer and the SE Team Lead to analyze the customer requirements and required functionality early in the project cycle; support the customer design reviews, conduct the Factory Acceptance Testing with the Customer and lead the subsequent deployment at the Customer site. The Project Engineer I participates in the System Acceptance Testing with the Lead Project, Systems Engineer and/or SE Team Lead. Primary Responsibilities: • Maintain a good working knowledge of Clever Devices software and products., • Support Product Management and Engineering in the definition of software and hardware products and interfaces., • Support the Systems Engineer on the Internal Requirements Review with Product Management and IT Deployment., • Support the Systems Engineer with the Preliminary and the Final System Design., • Review the Factory Acceptance Test (FAT) plan developed by the Systems Engineer., • Support the FAT with the Systems Engineer., • Document parameter and other changes carried out during the test and the deployment phase., • Review the System Acceptance Test (SAT) plan developed by the Systems Engineer., • Help with the SAT or lead the SAT with Systems Engineering support., • Ensure System compatibility and interoperability of all sub-systems., • Manage and document system configurations., • Work closely with the PE II or SE to ensure the deployment of the solution is successful., • Anticipate, mitigate, identify, troubleshoot, and resolve hardware and software problems on servers, input/output fleet, and workstations. Escalate incidents as necessary while documenting the same using the ticketing system., • Analyze system, server, application, network, and input/output device performance., • Create and maintain documentation as it relates to system configuration and processes., • 1+ years’ experience in project/ systems engineering involving hardware, software, data, networking, and communications technologies., • Experience with typical Engineering Lab equipment (multimeters, oscilloscopes, soldering irons, breadboards, etc.), • Ability to help implement large scale projects., • Ability to retrieve information from customers, apply this information to products and influence the change needed either in the products or in the customer requirements., • Some database experience., • Good understanding of the J1939 and J1708 protocols and experience with Multiplex systems, • Some working knowledge of C and C++, SQL, VB, JavaScript, HTML, ASP, databases, report generation, and networking., • Some hardware design experience., • Ability to independently gather and document requirements and support design requirements and product definition., • Good computer skills particularly with MS Office including Word, Visio, PowerPoint and Project. Ability to learn new programs such as MS Dynamics AX., • Good time management skills and ability to handle multiple tasks simultaneously., • Good problem solving and troubleshooting skills., • Good written and oral communication skills., • Good analytical skills., • Good interpersonal skills., • Good negotiation and influence skills., • B.S. in Computer Science, Engineering or Electrical Engineering or related field, or equivalent industry related experience., • Ability to Travel (domestic and international) at least 40% of the time if needed Clever Devices is an Affirmative Action/Equal Opportunity Employer In addition, Clever Devices Ltd. offers a variety of benefits to eligible employees, including health insurance coverage, wellness and family support programs, life and disability insurance, retirement savings plans, paid leave programs, education-related programs, paid holidays and time off, and many others, depending on the level and position offered. Many of these benefits are subsidized or fully paid for by the company. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice based on business need.

Job Description Engineer Tasks: • Design of electrical infrastructure and interior for a variety of commercial, residential and retail projects., • Create plans, schematics, equipment selection, load calculations, systems narratives and specifications, system design and layout, field investigation and construction administration., • Perform design work with AutoCAD and BIM/REVIT modeling., • Prepare due diligence and feasibility reports., • Attend meetings with other project consultants., • Work in close contact with the entire design team., • Provide engineering support for Senior engineering staff., • Comply with group and company standards and procedures. Required Qualifications: • Bachelor Degree in Electrical Engineering from accredited college or university., • Working Knowledge of AutoCAD and/or REVIT is a plus., • Fundamentals in Engineering (FE) certificate is desired., • Must be an effective team player and self-motivated.

Job Description About us! Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Mission Critical Data Centers, Science & Technology, Academic, Healthcare and Commercial buildings. In our 75th year with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. We offer mentorship, growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as a Senior Electrical Engineer / Group Leader to join our growing team in our Miami, FL office (Hybrid Schedule). What You will Achieve As a Senior Electrical Engineer / Group Leader, you will be designing the building infrastructure for various projects including Healthcare, Mission Critical Data Centers, Science and Technology, Academic and Commercial buildings. Some of your responsibilities include the following: Every Vanderweil Engineers team member brings something unique to the table. Here is what we are looking for with this role: • Serve as lead project engineer on a variety of commercial projects from new construction to renovations through all phases from conceptual design to construction. Project types include but are not limited to office buildings, labs, data centers, academic, high rise residential, hotels, museums, industrial, financial, government., • Coordinate design with internal teams (mechanical, plumbing, sustainability) and external stakeholders (architects, contractors, consultants)., • Responsible for the design of power distribution, lighting, emergency and standby power supply in accordance with all applicable NEC codes and standards. Maintain a strong understanding of associated Codes and Standards and ensure compliance in all team activities.Document design calculations and design path decisions., • Develop specifications, legends, site plans, lighting plans, power plans, one-lines, riser diagrams, details, various schedules such as panelboard schedules and mechanical schedules as well as load calculations., • Be part of the project team in the production of engineering solutions for large scale and complex building projects., • Develop and evaluate best engineering solutions for projects, and support and perform quality control reviews at various stages of design., • Lead the electrical team of engineers and designers and provide technical guidance in the development of the construction documents as well as support assigned staff on technical and administrative issues.., • Mentor and supervise junior engineers. Continuously evaluate and improve the Team’s deliverable quality, communications and attitude as well as review designs with QA-QC Engineer and Department Head., • Work in conjunction with the Managing Principal, Project Managers and Electrical team to plan the work and balance deliverables with budgets on multiple projects.., • Perform Construction Administration tasks such as field visits and subsequent issuance of field reports, responding to RFIs and reviewing shop drawings., • Perform studies associated with conceptual designs which may require site surveys of existing conditions, system sizing and definition of required space for anticipated electrical equipment. Essential Skills & Requirements • 15+ years of related experience, • Bachelor’s degree in electrical engineering or equivalent experience, • Revit knowledge is a plus., • Understanding of the NEC, IBC and IECC., • SKM, AGI 32 and AMPCALC 4 desired., • PE license highly preferred Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace.

Job Description What you’ll be doing: The Director of Facilities plays a key leadership role in maintaining and enhancing the physical infrastructure across a growing portfolio of express car wash locations. This role is responsible for ensuring that each site operates at peak performance—mechanically, aesthetically, and operationally—by overseeing all facility maintenance, capital projects, and vendor partnerships. Reporting directly to the VP of Development & Construction and working in close collaboration with equipment integration teams and Operations, the Director ensures facility strategies align with broader business goals and help deliver exceptional customer experience. You’ll help engineer the framework, processes, and systems to drive efficient maintenance practices and upkeep of existing and new assets all while fostering collaboration and alignment across teams. This is a high-visibility role ideal for someone who combines strategic thinking, organization development, and strong interpersonal skills. • Car Wash Facility Oversight: Manage the upkeep, preventative maintenance, and repair of all physical systems critical to car wash operations—including tunnels, point-of-sale areas, vacuum systems, mechanical systems, and utility infrastructure., • Capital Planning: Lead long-term capital project planning, budgeting, and strategy to support growth, standardization, and modernization of the wash network., • Cross Department Collaboration: Work with Development, Finance, Construction, Equipment and Operations teams to ensure facilities readiness during new site launches, acquisitions, and renovations., • Maintenance Systems: Implement and manage a Computerized Maintenance Management System (CMMS) to standardize workflows, prioritize work orders, and track service schedules across all sites., • Site Audits & Performance Checks: Conduct regular site audits and equipment assessments to monitor performance, safety compliance, and operational consistency., • Contractor & Vendor Management: Source, negotiate, and oversee relationships with maintenance vendors, contractors, and OEM service providers., • Operational Efficiency: Partner with Operations to minimize downtime, reduce reactive maintenance, and ensure consistent, high-quality customer experience., • Code Compliance: Ensure adherence to all environmental, health, and safety standards, including water reclaim systems, chemical handling, and electrical codes., • Bachelor’s degree in Facilities Management, Engineering, Construction, or a related field preferred., • 10+ years of experience in multi-site facilities management, ideally within the express car wash, retail fuel, QSR, or convenience industries., • Experience working closely with senior leadership, • Proven experience leading teams, managing capital budgets, and improving maintenance processes., • Proven ability to manage complex initiatives from start to finish, • Comfortable in a startup or high-growth environment, • Facilities Planning & Management, • Building Systems Design & Maintenance, • Asset and Property Maintenance, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing, walking, bending, and light lifting (up to 15 lbs) for event or team meeting support., • Must be able to travel to all locations within the portfolio (40% travel), • Must have reliable transportation and a valid driver’s license. A little about us: Founded in 2011 and proudly headquartered in Miami, El Car Wash is Florida’s #1 express car wash and we’re just getting started. At EL, we’re not just washing cars. We’re transforming the car wash experience. With state-of-the-art technology, eco-friendly practices, and an unmatched customer experience, El Car Wash is setting a whole new standard. Our unlimited wash programs, customer-first amenities, and innovative services make us a destination, not just a stop. At El Car Wash, our people drive our success. We’re passionate about creating a fantastic work environment, empowering neurodivergent individuals, supporting our Veterans, and giving back to the communities we call home. From partnerships with the Florida Panthers and Detroit Lions, to collaborations with Baptist Health, AdventHealth, and Zoo Miami, we’re committed to making a difference- both on and off the road. Join a team that's fast-growing, community-driven, and committed to excellence. Your career is about to shine! EL Car Wash is an Equal Opportunity Employer

Job Description Candidate should have previous Forensic experience. You must possess a valid Professional Engineering license (PE) to be considered Unqualified candidates will not receive a response. As an Electrical Engineer, you will conduct and manage investigations involving residential, commercial and industrial electrical systems; examine and assess electrical equipment and components; and conduct fire origin and cause investigations. You will interact with clients and other consultants, manage multiple, unique projects, and prepare written reports summarizing your analyses. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With locations nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage to commercial and industrial facilities and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. Technical Qualifications: • Bachelor of Science degree in Electrical Engineering (not electronics), • Licensed Professional Engineer (P.E.), • Forensic Experience, • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, Microsoft Office) Experience in One or More of the Following Areas: • Process Plants, • High Voltage Power Generation and Distribution, • Instrumentation and Controls Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, orally and in writing, • Think and work analytically, • Coordinate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Professionalism, • Honesty, • Competitive and Unique Salary Plan, • Health Insurance, • Dental Insurance, • 401(k) with company match Our unique salary plan allows for financial growth unmatched in the industry. EOE View our site online at Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies.

Job Description RDG introduces its first restaurant-concept brand, MILA, which offers guests a culinary journey through exquisite MediterrAsian cuisine, opened in January 2020 in Miami Beach. Combining genuine hospitality, fine dining, and a sophisticated nightlife atmosphere, MILA has quickly become a premier destination within Miami's upscale social scene. At RDG, we are a collective of individuals dedicated to excellence and the art of sensory engagement. We embrace the rhythms of life and are motivated by the thrill of adventure. Our core principles focus on providing customers with immersive experiences, organic design, and a refined culinary journey. DREAM IT MILA has exceeded expectations in its initial two years, achieving remarkable success despite pandemic-related challenges, and securing the #5 spot in The Restaurant Business Top 100 ranking. Building on this success, RDG has expanded into new concepts including AVA MediterrAegean in Winter Park, Florida, CASA NEOS on the Miami River (opened June 2024), and MM, a Membership Community. Upcoming projects include NOORA and Claudie (scheduled for fall 2024), AVA’s second location in Coconut Grove (2025), and HONŌ Japanese Steakhouse (2026). BUILD IT RDG's distinguished brand portfolio and exclusive membership program aim to create a network of venues and experiences that offer a unique lifestyle to guests and members in Florida. Our goal is to establish RDG as a leader in the luxury restaurant industry in the United States. GROW IT RDG has demonstrated rapid growth and is poised for significant economic expansion globally. We are actively exploring national markets such as New York City, Los Angeles, and Las Vegas, and international markets including Paris, London, Dubai, and Mexico City for potential expansion opportunities. Summary: A Maintenance Engineer is responsible for ensuring the smooth operation, safety, and efficiency of machinery, equipment, and systems within a facility. Their primary duties include performing regular inspections, preventive maintenance, troubleshooting mechanical and electrical issues, and repairing equipment as needed. They also work to minimize downtime, improve equipment reliability, and ensure compliance with safety and regulatory standards. RESPONSIBILITIES: • Responding to various general routine maintenance requests from the Upper management and Operations team, • Performing routine self-maintenance tasks such as minor plumbing, HVAC, painting, Kitchen equipment, carpentry, cleaning and general handyman tasks, • Performing troubleshooting tasks for various pieces of equipment, • Schedule and supervise the maintenance of all aspects of the building, • Work with operation’s team to handle and maintain health compliance requirements, • Prepare weekly report to be shared with the head of maintenance, • Ensure proper use of the maintenance management application SKILLS • General construction and handyman skills, • Carpentry, plumbing, roofing, painting, electrical and others, • Experience in the maintenance and with the functionality of kitchen and refrigeration equipment, • Problem solving skills, • Detail oriented, • Organizational skills and record keeping, • Written and oral communications skills, • Basic computer technology skills . Requirements/Qualifications: • 10+ years Other Skills and Knowledge: • English / Spanish LANGUAGE, computer skills/ emails, Reports.. Physical Demands And Work Environment: • Site assignments-(ability to carry heavy items) which lends itself to repetitive motion.

Job Description We are looking for a skilled Building Engineer to perform technical and mechanical functions for the purpose of operating property plant and equipment to achieve maximum energy efficiency, cost effectiveness, and engineering services to the building and its tenants. This person will be responsible for the operations and maintenance of all assigned buildings. Responsibilities: • Comply with all EPA, OSHA & ASHRAE rules, requirements, procedures and industry and Company safety guidelines., • Perform all necessary preventive maintenance tasks on HVAC, electrical, plumbing, fire control and building management systems; conduct monthly maintenance inspections as assigned and completing them on time, • Conduct Site inspections to include roof, mechanical & electrical rooms as assigned, • Troubleshoot and repair facility systems including HVAC, plumbing, carpentry, minor electrical, and preventive and corrective maintenance tasks, • Communicates effectively and clearly often with facility managers, tenants, vendors, employees, and visitors, • Provides recommendations/guidance on equipment upgrades and facility improvements, • Daily local travel between assigned properties, • Maintain a neat, clean professional appearance at all times, repair or replace worn or stained uniforms as needed, • Maintain an inventory of all tools, equipment, and vehicles issued., • Interact with client/tenants in a professional manner, • Immediately inform Regional Operations Manager of any problems., • Assist in coordinating the completion of any construction projects., • Assist in natural disaster recovery efforts, • Must be able to read and write English in order to understand manuals, procedures and written instructions, • Must be comfortable in using mobile device or laptop to access work order system, building systems, and use email, • Training and certification in HVAC or Operating Engineer technologies and/or job-related training and experience, • 2 years of field experience or equivalent technical training, • CFC training and certification or ability to obtain certification for the type of refrigerant serviced, preferred, • Continuing education in field, • Strong mechanical aptitude, • Ability to work independently with routine supervision, • Basic computer skills necessary to operate Building Automation Systems, • Ability to lift at least 50 lbs., • Work from heights, • Verify colors

Job Description Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies. As a Mobile Building Engineer within Corporate Advisory & Solutions, you'll be responsible for performing technical and mechanical functions property plant and equipment to achieve energy efficiency, cost effectiveness, and engineering services to the building and its tenants. This person will be responsible for the operations and maintenance of all assigned buildings in the area. Responsibilities: • Comply with all EPA, OSHA & ASHRAE rules, requirements, procedures and industry and Company safety guidelines., • Perform all necessary preventive maintenance tasks on HVAC, electrical, plumbing, fire control and building management systems; conduct monthly maintenance inspections as assigned and completing them on time, • Conduct Site inspections to include roof, mechanical & electrical rooms as assigned, • Troubleshoot and repair facility systems including HVAC, plumbing, carpentry, minor electrical, and preventive and corrective maintenance tasks, • Communicates effectively and clearly often with facility managers, tenants, vendors, employees, and visitors, • Provides recommendations/guidance on equipment upgrades and facility improvements, • Daily local travel between assigned properties, • Maintain a neat, clean professional appearance at all times, repair or replace worn or stained uniforms as needed, • Maintain an inventory of all tools, equipment, and vehicles issued., • Interact with client/tenants in a professional manner, • Immediately inform Regional Operations Manager of any problems., • Assist in coordinating the completion of any construction projects., • Assist in natural disaster recovery efforts, • Must be able to read and write English in order to understand manuals, procedures and written instructions, • Must be comfortable in using mobile device or laptop to access work order system, building systems, and use email, • Training and certification in HVAC or Operating Engineer technologies and/or job-related training and experience, • 2 years of field experience or equivalent technical training, • CFC training and certification or ability to obtain certification for the type of refrigerant serviced, preferred, • Continuing education in field, • Strong mechanical aptitude, • Ability to work independently with routine supervision, • Basic computer skills necessary to operate Building Automation Systems, • Ability to lift at least 50 lbs., • Work from heights, • Verify colors #IND123 About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy.

Job Description Growing, entrepreneurial commercial real estate company seeks Building Maintenance Engineer for its expanding operations. Essential Duties and Responsibilities include but are not limited to the following: • Perform daily building integrity checks. Ensure building and grounds interiors and exteriors are clean and safe. Ensure building HVAC mechanical systems are online and functioning properly. Perform preventative maintenance of building systems and sub-systems. Oil and grease pumps, change oil in air compressor, and monitor air handling units., • Operate and trouble shoot HVAC Systems. This individual should take ownership of the building, be aware when chiller or other HVAC type systems go down and start trouble shooting immediately to diagnose problem, checking suites, contacting Vendors and others as needed., • Handle all tenant service requests in a timely manner and inform tenant when the job is completed., • Order supplies, handle wallpaper repairs, fire extinguisher inspections, inspect automatic doors, clean up water spills, patch parking lot, pressure washing, touch-up paint on buildings, stairwells, etc., change light bulbs, stained ceiling tiles and other maintenance duties including plumbing repairs of faucets, toilets, in common areas and tenant spaces as requested by Property Manager., • Meet service vendors and contractors to get bids when needed, quotes for emergency repairs, supervise some tenant finish work after hours, follow up inspections after repairs are made., • Individual maintains current inventory of all building tools, equipment and fixtures in a clean and orderly manner., • Conducts pre and post-construction inspection of Tenant Improvement areas to ensure all mechanical equipment is in working order and in compliance with building standards., • Proactive in reporting all alarms or energy systems problems to Director of Property Management and Property Manager., • Performs other related duties and assignments as required., • Daily contact with general public, vendors and tenants. Qualifications: • Bilingual: English/Spanish preferred, • High school diploma with some college or technical training on Mechanical systems., • Strong customer service skills, dealing with tenants, administration, vendors, • Position requires (5) + years’ experience with well-rounded maintenance background in building maintenance, HVAC, plumbing, electrical, air compressors and painting., • Continued education on upgrades to building systems as needed., • Ability to work independently or supervise others as needed., • Good communication skills., • Reliable transportation to travel between buildings and carry supplies., • Electrical skills needed to replace exit lights, light bulbs and ballasts., • Plumbing skills to install faucets, guts for toilets or other minor plumbing needs or supervise installation by vendors., • Ability to walk properties, climb stairs and ladders., • Ability to lift up to 50 pounds, if needed., • Work inside and outdoors as required., • Engineer is on call 24/7 and must be able to respond to emergencies at building on weekends and evenings.Company DescriptionSquare2 Capital is a fully integrated and boutique real estate investment and management firm based in Miami with over $400M in real estate assets under management. Square2’s main focus is in the acquisition and operation of office and mixed-use asset classes, always focusing on maximizing returns for investors through active-management and value-add strategiesSquare2 Capital is a fully integrated and boutique real estate investment and management firm based in Miami with over $400M in real estate assets under management. Square2’s main focus is in the acquisition and operation of office and mixed-use asset classes, always focusing on maximizing returns for investors through active-management and value-add strategies

Job Description • Please note that this is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties • Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents, • Ability to program projects with various levels of complexity, • Capable of performing network troubleshooting, database troubleshooting and repair programming, • Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations, • Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems, • Maintains accurate and thorough project documentation and redlines, • Provides owner training as required by the project, • Executes system commissioning and functional testing, • Assist in installation of control hardware, • Startup and commission new hardware installations, • Provide project management assistance on projects as required, interfacing directly to customers, • Supervise sub-contractors and suppliers as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job Description Maintenance Engineer - Full Time AC And Element Hotel Miami DT **Job Summary: We are seeking a dedicated and skilled Maintenance Engineer to join our team. The ideal candidate will be responsible for the upkeep, repair, and optimization of machinery and equipment to ensure smooth and efficient operations. The Maintenance Engineer will collaborate with other team members to maintain a safe working environment and minimize downtime. Key Responsibilities: • Conduct regular maintenance checks on machinery and equipment to ensure optimal performance., • Troubleshoot and diagnose mechanical and electrical malfunctions., • Perform repairs and replacements of faulty components, including motors, belts, and pumps., • Implement preventive maintenance programs to reduce equipment failures and downtime., • Maintain accurate records of maintenance activities, repairs, and inspections., • Work with maintenance management software to track work orders and inventory of parts., • Collaborate with production teams to understand equipment issues and develop effective solutions., • Ensure compliance with safety regulations and best practices in maintenance processes., • Assist in the training of maintenance staff and help develop their skills., • Participate in continuous improvement initiatives and provide input on efficiency enhancements., • Respond to emergency maintenance calls and perform repairs as needed. Qualifications: • Minimum of 2 years of experience in maintenance engineering or a similar role., • knowledge of electrical systems, carpentry, plumbing, mechanical HVAC, dry wall, painting etc., • Familiarity with maintenance management systems and tools., • Excellent problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Strong communication skills, both written and verbal., • Willingness to work flexible hours, including evenings weekends and holidays as needed. Physical Requirements: • Ability to lift up to [50 lbs.] and perform physically demanding tasks., • Comfortable working in various environments, including indoor and outdoor settings., • Ability to stand, walk, and climb for extended periods. Benefits: • Competitive salary and overtime opportunities., • Comprehensive health, dental, and vision insurance., • Retirement savings plan with company match., • Paid time off and holidays., • Opportunities for professional development and training. Join our team and be a part of a dynamic environment where you can grow your skills and contribute to our success!

Job Description Salary Range: $114,400.00 – $170,000 Position: Electrical Engineer Location: 5959 Waterford District Drive, Suite 410, Miami, FL 33126 EAC Consulting, Inc. (EAC) is looking for an Electrical Engineer to join our Miami Office. EAC is a trusted firm for infrastructure solutions that advance communities through innovation and resilience. Our full-service capabilities include planning, design, construction management and program management within transportation, site development, utilities, water/wastewater, airports, and seaports. Move your career forward working with EAC’s highly talented industry professionals who enhance quality of life through engineering excellence! WHY EAC? At EAC, we thrive by collaborating as one unified team. We live our core values, delivering exceptional client service and cutting-edge engineering. EAC was ranked by Engineering News-Record (ENR) among the "Top Southeast Design Firms" to work for. Our benefits package exceeds industry standards and includes: · Employer-Paid Insurance Coverage · Competitive 401K Employer Matching · Career Growth & Development/Tuition Reimbursement · Employee Stock and Bonus Program · Health Club Subsidy DISCIPLINE/AREA OF CONCENTRATION: Transportation Technology & Systems KNOWLEDGE, SKILLS AND ABILITIES: • Knowledge and expertise in NEC, NFPA and other national standards., • Knowledge of codes, principles and practices of electrical engineering., • Knowledge of design techniques for developing solutions for engineering problems., • Knowledge in Signalization, Lighting, Utilities, Intelligent Transportation Systems and Tolling., • Knowledge of AASHTO, State (FDOT) and Municipal (Green Book) design criteria, standards and plans preparation requirements., • Excellent verbal, technical writing and presentation skills., • Problem solving and analytical skills., • Ability to develop high-quality design plans and check the design work of others for accuracy and quality., • Ability to understand, analyze, and process complex technical information. ESSENTIAL FUNCTIONS: Engineering: • Engineer of Record where needed., • Makes design recommendations, adaptations, and modifications., • Performs calculations using engineering formulas and skills., • Prepares reports and correspondence., • Serves as a technical advisor and mentor to junior-level project team members., • Develops plans, specifications, and reports in accordance with engineering standards and client requirements., • Leads or participates in the design process to deliver successful projects. Work may include:, • field investigations or inspections, • detailed design work and plans preparation, • detailed checks of design computations and plans done by other., • Assists with technical write-ups or other content as needed for proposals., • Assists with concept development for project approaches, etc. in proposals., • Seven (7+) years of experience (Electrical Engineer 1), • Required: Bachelor’s degree in electrical engineering., • For Electrical Engineer 1: Licensed as a Florida Professional Engineer (P.E.) is required or EI Passed and Ability to take and Pass PE exam within 6 months of employment. For PEs, out-of-state PE is acceptable and Florida PE is required within 3 months of employment., • For Senior Electrical Engineer: Licensed as a Florida Professional Engineer (P.E.) required. Out-of-state PE is acceptable within 1 month of employment. Florida PE is required within 3 months of employment.

Job Description The Chief Engineer is responsible for the oversight of the building maintenance of the property. This includes the interior as well as the exterior of the building. This person must be knowledgeable in HVAC, Refrigeration, and Electrical Engineering. Performs complex analytical work in providing office and building engineering support and field engineering support to ensuring technical competence and compliance with all current codes and criteria. Job Complexity & Critical Skills Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The position is fundamental to the administrative and operational functions of the Company/Property and as such requires established organizational skills, with attention to detail and solid time management, and good interpersonal skills., • As the key employee of the building operations interior and exterior, the Chief Engineer is essential to the longevity of all equipment and the aesthetic nature of the property. The Chief Engineer must perform the job duties with a view toward projecting a professional and competent image: Service to the customer in a friendly and outgoing manner is also essential, while timelines and maintaining a clean atmosphere are key., • Performs the day to day routine maintenance of the building utilizing their maintenance staff in a leadership role., • Develops and adheres to the preventative maintenance program for the community. Update as needed., • Supervise all building repairs done by outside vendors, reporting to the Association Manager satisfactory/unsatisfactory completion., • Maintain an operating environment to achieve a satisfactory level of resident’s service as measured by formal and informal feedback and surveys., • Monitoring all systems of the building and performing any and all basic repairs as needed., • Demonstrates a routine and effective ability to adjust to changing circumstances., • Responds to phone calls and correspondence in a timely, professional manner., • Encourages maintenance staff to behave in a professional manner and comply with company’s safety standards. Motivates staff to work as a team., • Creates a maintenance report, which depicts an update on the actual condition of the property, progress of specific projects, and makes clear and concise recommendations., • Observes all safety standards and participates in the Company’s efforts to provide a safe work environment., • Understands and follows the directions and tasks given by direct supervisor and conscientiously completes them., • Organizes time effectively and successfully balances the competing demands of multiple projects. Financial Management. Technical Capacity. Performance Management. Communication Proficiency. Ethical Conduct. Leadership. Problem Solving/Analysis. Strategic Thinking The Chief Engineer will be responsible for interviewing, training, staff development and scheduling. Work Environment While performing the duties of this job, the employee occasionally works in outside weather conditions. The employee occasionally works near moving mechanical parts and in high, precarious places and is occasionally exposed to wet and/or humid conditions and fumes. The noise level in the work environment is usually moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The physical demands and work environment characteristics described here are representative of those that must be met or encountered by the employee to successfully perform the essential functions of this job. The company will provide a reasonable accommodation for a qualified individual with a disability, unless providing such accommodation will present an undue hardship. While performing the duties of this job, the employee is occasionally required to stand; walk; use hands to finger, handle, feel or operate objects, tools or controls; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl; talk or hear; and smell. The employee must occasionally lift and/or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.. This position requires occasional exposure to the outdoor climate and weather conditions. Position Type/Expected Hours of Work The schedule of the position is full time (40 hours a week) and will require to be available for emergencies and occasional night and weekend work due to special projects. This an exempt (salaried) position. This position will require to attend occasional off-site meetings during business hours and within the local city limits. Required Education and Experience • High School Degree; preferred education; AA degree in industry, • Three (3) to Five (5) years of experience as a Maintenance employee in a supervisory role in hi-rise buildings., • Must be HVAC Certified and/or have a comparable technical school certification., • Must have strong working knowledge of basic trades, such as, electrical, plumbing, carpentry, HVAC, and painting standard principles and practices., • Ability to analyze and interpret technical aspects, pumps, and motors, mechanical systems with a similar degree of complexity., • Must be proficient and have a working knowledge of Microsoft Word and Excel applications., • Must have a valid Florida driver’s license Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Free food & snacks, • Health insurance, • Paid time off General Skills (Required): Knowledge of AutoCAD, Revit & BIM 360. Demonstrates a basic understanding of electrical building systems. Interest in building electrical systems and introductory familiarity with the IEEE, NFPA, and Florida Building Codes. Basic understanding of Microsoft Office 365 Suite (Outlook, Word, Excel, Teams, OneNote). Ability to verbally communicate detailed and accurate instructions and information. Ability to hear with or without correction to receive and interpret detailed information. Primary Responsibilities: Design and develop electrical systems and/or components to high specifications, focusing on cost, safety, reliability, quality, and sustainability. Creating electrical drawings for new projects, updating existing drawings as needed, and communicating with clients about changes. Performing calculations to determine voltage drop across conductors, transformer capacities, and amperage draw from electrical devices. Reviewing and revising design plans to ensure compliance with building codes and standards. Designing electrical control panels, switches, circuit breakers, fuses, junction boxes, transformers, light fixtures, power lines, outlets, and wiring systems. Developing electrical layouts based on the clients specifications. Expectations: Must demonstrate a strong desire to fulfill a career in the Building Design & Construction Industry. Complete tasks efficiently within the established timelines. Balance various projects simultaneously. Be receptive to mentoring from associate team members and have positive, collaborative dialogue with other disciplines in executing each project. Continuously seek continuing education opportunities and self-study electrical systems, attend seminars, and gain qualifying experience to qualify to sit for the PE licensure exam. Qualifications: Must have a bachelors degree in electrical engineering At least 2-3 years of experience in Electrical Design Engineering. Construction Administration skills Must possess excellent communication skills, in both written and oral skills in the English language. If you consider you meet the qualifications to occupy this position, please apply through Indeed.

Job Description The Chief Engineer is responsible for the oversight of the building maintenance of the property. This includes the interior as well as the exterior of the building. This person must be knowledgeable in HVAC, Refrigeration, and Electrical Engineering. Performs complex analytical work in providing office and building engineering support and field engineering support to ensuring technical competence and compliance with all current codes and criteria. Job Complexity & Critical Skills Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The position is fundamental to the administrative and operational functions of the Company/Property and as such requires established organizational skills, with attention to detail and solid time management, and good interpersonal skills., • As the key employee of the building operations interior and exterior, the Chief Engineer is essential to the longevity of all equipment and the aesthetic nature of the property. The Chief Engineer must perform the job duties with a view toward projecting a professional and competent image: Service to the customer in a friendly and outgoing manner is also essential, while timelines and maintaining a clean atmosphere are key., • Performs the day to day routine maintenance of the building utilizing their maintenance staff in a leadership role., • Develops and adheres to the preventative maintenance program for the community. Update as needed., • Supervise all building repairs done by outside vendors, reporting to the Association Manager satisfactory/unsatisfactory completion., • Maintain an operating environment to achieve a satisfactory level of resident’s service as measured by formal and informal feedback and surveys., • Monitoring all systems of the building and performing any and all basic repairs as needed., • Demonstrates a routine and effective ability to adjust to changing circumstances., • Responds to phone calls and correspondence in a timely, professional manner., • Encourages maintenance staff to behave in a professional manner and comply with company’s safety standards. Motivates staff to work as a team., • Creates a maintenance report, which depicts an update on the actual condition of the property, progress of specific projects, and makes clear and concise recommendations., • Observes all safety standards and participates in the Company’s efforts to provide a safe work environment., • Understands and follows the directions and tasks given by direct supervisor and conscientiously completes them., • Organizes time effectively and successfully balances the competing demands of multiple projects. Financial Management. Technical Capacity. Performance Management. Communication Proficiency. Ethical Conduct. Leadership. Problem Solving/Analysis. Strategic Thinking The Chief Engineer will be responsible for interviewing, training, staff development and scheduling. Work Environment While performing the duties of this job, the employee occasionally works in outside weather conditions. The employee occasionally works near moving mechanical parts and in high, precarious places and is occasionally exposed to wet and/or humid conditions and fumes. The noise level in the work environment is usually moderate to loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The physical demands and work environment characteristics described here are representative of those that must be met or encountered by the employee to successfully perform the essential functions of this job. The company will provide a reasonable accommodation for a qualified individual with a disability, unless providing such accommodation will present an undue hardship. While performing the duties of this job, the employee is occasionally required to stand; walk; use hands to finger, handle, feel or operate objects, tools or controls; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl; talk or hear; and smell. The employee must occasionally lift and/or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.. This position requires occasional exposure to the outdoor climate and weather conditions. Position Type/Expected Hours of Work The schedule of the position is full time (40 hours a week) and will require to be available for emergencies and occasional night and weekend work due to special projects. This an exempt (salaried) position. This position will require to attend occasional off-site meetings during business hours and within the local city limits. Required Education and Experience • High School Degree; preferred education; AA degree in industry, • Three (3) to Five (5) years of experience as a Maintenance employee in a supervisory role in hi-rise buildings., • Must be HVAC Certified and/or have a comparable technical school certification., • Must have strong working knowledge of basic trades, such as, electrical, plumbing, carpentry, HVAC, and painting standard principles and practices., • Ability to analyze and interpret technical aspects, pumps, and motors, mechanical systems with a similar degree of complexity., • Must be proficient and have a working knowledge of Microsoft Word and Excel applications., • Must have a valid Florida driver’s license Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Employment Details: • Recognized Civil Infrastructure Consulting firm in the US & Canada, • 100% employee owned, • Full Benefits: Health, Vision, Dental, and 401K match, • Sign on bonus opporunity, • Conduct Power Distribution review of Municipal facilities, • Manage projects for power distribution upgrades of Municipal Infrastructure projects, • Prepare reports, develop plans, and specifications for municipal clients, • Bachelor’s degree in Electrical Engineering, • Registration as a Professional Engineer, • 8 - 12 years of experience design low and medium voltage power distribution systems, industrial, controls, and lighting systems for municipal facilities, • Strong experience with designing point to point conduit and wire systems for municipal facilities and water treatment plants, • Experience developing One-Line diagrams and Control schematics, • Have comprehensive knowledge of the NFPA 70E & ETAP, • Extensive experience with medium and large-scale water/wastewater municipal projects, • Master’s degree in Electrical Engineering (+)

Job Description Civil Engineer - Structural Engineer - Failure Analysis - Investigative - PE Candidate should have previous forensic experience. Qualified candidates MUST currently hold a valid PE license and have forensic experience - No Exceptions! Unqualified candidates will not receive a response. No Recruiters. If you have experience in aspects of structure design, construction, and/or construction management, and enjoy seeing a site first-hand to determine why the structure or building component did not perform as expected or to determine how to repair damage to a structure, then you will find this job interesting. Typical projects will involve weather-, fire-, or water-damaged buildings and building components, soil movement, drainage and foundation issues, and defective construction and/or design. Key attributes for success are technical competence, the ability to communicate in both written and verbal forms with non-technical people, and the self-motivation to complete individual projects. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With locations nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage and the value of loss to commercial and industrial facility and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. We actively seek individuals with diverse backgrounds and experiences, and likewise share the benefits of the diverse backgrounds and experiences within our staff. Civil/Structural Engineer: As a Civil/Structural Engineer, you will conduct and manage investigations involving buildings, structures and structural components, including structural analysis, damage assessment, building code compliance, lab and field testing of construction materials, and review of structural designs. You will interact with clients and other consultants, manage multiple and unique projects, and prepare written reports summarizing your analyses. Engineers who are successful at EDT have the following technical qualifications, professional skills, and characteristics: Technical Qualifications: • Bachelor of Science Degree in Civil/Structural Engineering, • Licensed Professional Engineer (P.E.), • Forensic Engineering Experience, • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, MS Office), • Industrial/Manufacturing/Design Experience Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, verbally and in writing, • Think and work analytically, • Cooperate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Integrity, • Professionalism, • Honesty ENGINEERING DESIGN & TESTING OFFERS A COMPREHENSIVE WAGE and BENEFITS PLAN: • Competitive and Unique Salary Plan, • Health Insurance, • Dental Insurance, • 401(k) with company match Our unique salary plan allows for financial growth unmatched in the industry. EOE Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies or recruiters. Job Type: Full-time

Job DescriptionCHIEF ENGINEER The Chief Engineer is responsible for the overall success of the Anatomys facilities and engineering efforts. The role requires strong technical expertise, leadership skills, and the ability to manage complex projects and teams. This is a hands-on role in which the Chief Engineer will be required to diagnose, repair, and maintain HVAC, electrical, plumbing, and mechanical systems using tools, using personal experience, and technical knowledge. Key Responsibilities: Technical Oversight: Oversee and directly diagnose and be able to personally repair and maintain HVAC, electrical, plumbing, and mechanical systems using tools, experience, and technical knowledge. Provide technical guidance to the facilities team and management for review designs and proposal to ensure engineering solutions align with organizational goals. Design, implement, and optimize technical programs to improve facility efficiency, reliability, and safety. Team Leadership and Management: Supervise, mentor, and guide facilities teams, assign tasks, and foster a positive work environment. Project Management: Oversee projects from conception to completion, include planning, budgeting, and resource allocation; ensure adherence to timelines and quality standards. Budget and Resource Management: Manage engineer budgets, allocate resources effectively, and negotiate with vendors. Compliance and Safety: Ensure compliance with safety regulations and company standards, conduct safety inspections, and implement preventative maintenance programs. Communication and Collaboration: Effectively communicate with stakeholders, include clients, vendors, and other departments, and foster collaboration within the team and across the organization. Problem Solve and Troubleshooting: Identify and resolve technical issues, develop innovative solutions based upon direct hands-on diagnosis and experience personally repairing equipment/systems. Conduct root cause analysis (RCA) for system failures and implement corrective actions. Reporting and Documentation: Prepare reports for management, maintain accurate documentation of engineering processes and procedures, and analyze data to improve performance. Training and Development: Provide technical training and mentorship to junior engineers and/ technicians/facilities staff. Qualifications: Five + years of direct hands-on experience in the maintenance and repair of HVAC, painting, carpentry, plumbing and electricity (having personally performed such work). Applicable training, or certification, in HVAC and/or other related trade licenses/ certification in order to provide hands on experience Strong leadership and interpersonal skills, with the ability to motivate and inspire a team. Excellent problem-solving and decision-making abilities. Strong organizational and time management skills. Bilingual (English/Spanish) strongly preferred. Physical Requirements: Able to lift, pull and push materials and equipment up to 50 lbs. to complete assigned job tasks. Work in an upright standing position for long periods of time; be able to reach overhead; have full range of mobility in upper and lower body. Be able to work in various positions, including, but not limited to stooping, standing, bending over, sitting, kneeling, and squatting for extended periods of time, climbing stairs, navigating the property/building quickly and easily as required to meet the job functions. Climb ladders and work at heights above ground level (maximum 14 ft on A-frames and 21 ft on extension ladders) Ability to work in different environmental working conditions (e.g., heat, cold, wind, rain, humidity) Repeat various motions with the wrists, hands, and fingers. Be able to lift, pull and push materials and equipment up to 50 lbs. occasionally to complete assigned job tasks. Salary and Benefits: $75,000 - $85,000 per annum Bonus potential up to 10% of base salary Medical and Dental insurance with 50% of premium paid by Anatomy. Paid vacations and holidays Discounts on Anatomy products and services

Job Description Candidate should have previous Forensic experience. You must possess a valid Professional Engineering license (PE) to be considered Unqualified candidates will not receive a response. As an Electrical Engineer, you will conduct and manage investigations involving residential, commercial and industrial electrical systems; examine and assess electrical equipment and components; and conduct fire origin and cause investigations. You will interact with clients and other consultants, manage multiple, unique projects, and prepare written reports summarizing your analyses. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With loctions nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage to commercial and industrial facilities and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. Technical Qualifications: • Bachelor of Science degree in Electrical Engineering (not electronics), • Licensed Professional Engineer (P.E.), • Forensic Experience, • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, Microsoft Office) Experience in One or More of the Following Areas: • Process Plants, • High Voltage Power Generation and Distribution, • Instrumentation and Controls Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, orally and in writing, • Think and work analytically, • Coordinate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Professionalism, • Honesty, • Competitive and Unique Salary Plan, • Health Insurance, • Dental Insurance, • 401(k) with company match Our unique salary plan allows for financial growth unmatched in the industry. EOE View our site online at Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies.

Job Description We are looking for a Senior Electrical buildings engineer with active Professional Engineer license in Florida; who meets the following profile : Work location: Miami Responsibilities: Perform electrical engineering design for various building types; Provide design reviews and comments to project managers and external consultants to ensure electrical design meets requirements; Provide engineering advice on existing and new buildings; Perform load calculations, voltage drop calculations, wiring sizing, and equipment selections. Requirements: Bachelor’s degree in Electrical engineering with active Professional Engineer license in Florida; Minimum 7 years of relevant experience; Member of a professional organization, an asset; High CADD proficiency; Knowledge of REVIT, an asset; Working knowledge of National Electrical Code; Proficiency in MS office; Have good abilities in technical writing; Strong communication and customer relationship management skills.

Job Description Senior Electrical Engineer – Building Systems Design Miami, FL | Full-Time | Competitive Salary + Benefits Position Summary The Electrical Engineer / Designer will play a vital role in supporting high-profile projects through innovative power and lighting system designs. This position is based full-time at the Miami office and works closely with senior leadership and project teams to develop solutions that align with technical codes, project schedules, and client needs. Responsibilities * Execute electrical design tasks for assigned projects, including layout planning, circuiting, load calculations, and system documentation * Independently review design work to ensure it reflects sound engineering judgment and industry best practices * Prepare technical calculations, design documents, and materials/equipment specifications to support system implementation * Contribute to construction drawing sets and remain involved throughout the design and documentation lifecycle * Coordinate closely with project managers, mechanical and architectural teams to align design work with broader project goals * Interpret and apply relevant state and national codes and standards throughout design phases * Manage design inputs and constraints to arrive at practical, code-compliant electrical system solutions * Balance multiple project assignments while maintaining quality standards and meeting agreed-upon deadlines Qualifications Education * Bachelor’s degree in Electrical Engineering or a related discipline from an accredited institution. Work Experience * Minimum of five (5) years of experience designing electrical systems in a professional engineering or consulting environment Licenses & Certifications * EIT required; PE license preferred * LEED Green Associate or LEED AP certification is a plus Software Proficiency * Proficient in AutoCAD, Revit, and BIM 360 * Comfortable working in Microsoft Office (Outlook, Word, Excel) Apply now to submit your resume. Please provide as much detail in the resume as possible to expedite recruitment screening.

Job Description This position is perfect for individuals who are: • Retired, • Open to extra hours during the first shift, • Seeking gig work Named “Top Places to Work” and one of the “Fastest Growing Companies”, Bevara focuses on empowering our team members with the tools and support they need to reach their professional aspirations. We foster a vibrant, interactive team culture that values collaboration. We promote a healthy work-life balance and pride ourselves on working hard while also enjoying our time together! Be a part of something big and join our team! About the Position We are looking for a dedicated individual to provide world-class service at some of our commercial buildings in Miami on a limited part-time basis. As a Flex Building Engineer, you will work alongside our Building Engineering team to provide support and back up coverage on an as-needed basis. The Flex Engineer will train with our full-time Building Engineer a few hours a month to stay current and familiar with the buildings and will act as back up coverage during vacations or possibly provide additional emergency support. As such, you will be responsible for maintaining the property’s physical condition and safeguarding it against damage, loss, and deterioration. The ideal candidate is proactive, self-motivated, and versatile—a true jack of all trades. The ideal candidate will have a flexible schedule- perhaps a retired Engineer or someone who owns their own business. This position is perfect for someone looking for some additional hours per month but not tied to a set schedule. Typical Hours: 1st shift What you’ll be doing • Conduct regular assessments of building systems., • Perform minor repairs, preventative maintenance, and respond to service requests for both interior and exterior building equipment., • Manage work order requests related to mechanical, electrical, plumbing, and fire systems., • Proactively maintain an ongoing task list for the property management team., • Serve as the primary contact for vendors, overseeing their check-in/out process and escorting them to their work areas while documenting the work completed., • Assist with fire panel and extinguisher inspections., • Ensure a safe job site and adhere to company, OSHA, and client-specific safety standards., • High School Diploma or GED., • Preferred 3-5 years of experience in commercial building operations and engineering., • Knowledge of HVAC, electrical, and plumbing systems., • Ability to manage multiple projects and make independent decisions., • Basic computer skills and proficiency with smartphones (email, texts, work order systems)., • Current and valid driver’s license. Offers of employment are contingent upon successful completion of the following: • Drug screening, • Background check, • Physical examination, • 401(k) retirement plans with company match starting Day 1!, • Free on-site parking., • Mileage reimbursement (When applicable)., • Uniforms plus annual uniform allowance., • Tools and equipment provided for your job., • Internal advancement opportunities Bevara Building Services provides equal employment to all persons. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. Powered by ExactHire:183816