Trabajos electrical engineer en Buffalo, New YorkCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer (Digital Design) Job Code: 34606 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: The L3Harris Communication Systems segment is seeking a highly motivated, team-oriented Electrical engineer experienced with Digital Design to join an engineering organization that designs and delivers leading edge communications products. This role will report directly to Hardware Engineering Manager and is responsible for successfully design PWB circuitry for number of key products. This individual will be a member of cross functional development team with hands on responsibility for leading aspects of design, integration, and testing. Strong communication and interpersonal skills couple with ability to work within a large engineering team are required. Essential Functions: • Digital hardware research, design, and development related to software defined radios., • Simulation, prototyping, schematic capture, understanding of printed wiring board and flexible circuit layout design, hands on measurement of high speed and other electrical interfaces, • Ability to prioritize tasks and issues based on technical challenge and business/revenue impact., • Diverse product development knowledge from component selection through change orders and factory implementation., • Analysis of electrical requirements to determine feasibility of design within time and cost constraints., • Extensive hands-on experience with test equipment including oscilloscopes, spectrum analyzers, network analyzers, signal generators etc. to establish operating data, conducts experimental tests and evaluate results., • Proficient in the use of high level programming languages to configure programmable logic devices, control electrical circuits, and to increase job efficiency., • Perform integration with other subsystems including RF, FPGA, DSP, embedded firmware, test equipment, etc., • Provide timely and thorough response to issues that impact continuous production and generation of revenue in in operations, • Problem-solving expertise, ability to work autonomously and with others, • Experience in emerging digital design trends (including new parts, manufacturers, capabilities, analysis) #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Sr. Specialist, Electrical Engineer (Digital Design) Job Code: 35926 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: Successful candidate will have a strong Analog & Digital Electrical Engineering background and experience to support critical component shortages and other design activities for L3Harris tactical radio products and accessories. The individual will work closely with both the design engineering community and all operational resources to enable continuous manufacturing. Additional program support is also required to enable new business opportunities. Essential Functions: • Responsible for architecting, designing, developing, modifying, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance digital hardware systems., • Ability to prioritize tasks and issues based on technical challenge and revenue impact., • Diverse product development knowledge from component selection through change orders and factory implementation., • Analyzes electrical requirements to determine feasibility of design within time and cost constraints., • Hands-on experience with test equipments including oscilloscopes, spectrum analyzers, network analyzers, signal generators etc. to establish operating data, conducts experimental tests and evaluate results., • Includes the application of specialized skill sets including digital, analog, FPGA, DSP, CCA, power, antenna, and control systems knowledge as required. Provide timely and thorough response to issues that impact continuous production and generation of revenue in the JROC focus factories with staffing and problem-solving expertise., • Exposure to electronic circuit elements such as: ASICs, PLLs, DACs, Amplifiers and Power Supplies desirable, • Experience designing state of the art Analog & Digital electronic circuits, • Proven and effective communications skills and interpersonal skills, • Experience with Analog & Digital design, tuning, analysis and optimization, • Ability to utilize signal processing algorithms in FPGAs and software, • Experience with part selection and interfacing with manufacturers, • Able to test and support initial bring-up of prototype hardware, • Experience with detailed circuit level design verification testing, power savings analysis and optimization, • Perform electronic circuit design including schematic capture and layout knowledge, • Bachelors Degree in Digital Electrical Engineering preferred In compliance with pay transparency requirements, the salary range for this role in New York state is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer (Digital Hardware Design) Job Code: 34694 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: Join our team as a Digital Hardware Engineer and play a critical role in advancing the next generation of embedded digital hardware supporting L3Harris Software Defined Radios (SDR) and accessories. Reporting to a Senior Engineering Manager, you will take ownership of the full hardware lifecycle—from conceptualizing high-level requirements to seeing your designs move through manufacturing and into the field. This is an opportunity to solve complex integration challenges within a cross-functional environment, ensuring our communication systems meet the highest performance standards. Essential Functions: • High-Speed Digital Protocols: Comprehensive technical knowledge of embedded microprocessor design and integration for ARM Cores, DDR memory interfaces, and high-bandwidth USB and Ethernet., • Design Simulation & Analysis: Proficient use of simulation tools such as LTSpice for circuitry, HyperLynx for signal integrity, and MATLAB for system-level modeling., • Advanced Architecture & PCB Design: Proven ability to lead the full design cycle—including requirement analysis, schematic capture (using Mentor VX/DxDesigner), and complex high-speed layout analysis., • Verification & Validation (V&V): Expertise in executing subsystem and system-level test plans, using lab equipment (oscilloscopes, logic analyzers) to identify and resolve critical hardware defects., • Compliance & Reliability Engineering: Experience designing for MIL-STD-461 (EMI/EMC) and adhering to IPC standards to ensure hardware survivability in high-reliability environments., • Security Clearance Eligibility: Ability to obtain and maintain a US Security Clearance. Qualifications: • Education: Bachelor’s Degree in Electrical/Computer Engineering or a related field., • Experience: 6+ years of relevant experience (4+ with a Master’s degree) or 10+ years of experience in Digital Design in lieu of a degree. Preferred Additional Skills: • Specialized Knowledge: Familiarity with SDR architectures, embedded SW/VHDL, and configuration management tools like Agile., • SDR & RF Architecture Mastery: A nuanced understanding of Software Defined Radio (SDR) architectures and the interaction between digital boards and RF circuitry., • Hardware-Software Integration: Experience using embedded software, scripting (e.g., Python), or VHDL to automate design analysis and facilitate rapid troubleshooting., • Configuration & Lifecycle Management: Proficiency with Agile PLM software to manage product data and streamline manufacturing introduction., • Diagnostic Tool Proficiency: Familiarity with Boundary Scan tools (JTAG) for testing high-density PCBAs where physical probe access is limited. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provides day-to-day supervision and operations support for shift operators. Primary Duties/Responsibilities: • Direct shift operators in basic duties, setting priorities, troubleshooting operational and mechanical issues., • Interface with the client and contractors as needed when the Project Manager is not available., • Operate equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure., • Performs CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, valves, gates, mixers, conveyors, compressors, dryers, chemical feed, boilers, and chillers. Reports and documents results of work performed and enters into appropriate database., • Promptly reports any operational problems with machines or equipment to the Asset Manager and/or Project Manager., • Troubleshoots mechanical, hydraulic or pneumatic equipment to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored., • Collects water and wastewater samples according to schedule. Performs field tests in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder., • Performs lab tests and prepares reports per procedure. Analyzes parameters including pH, alkalinity, chlorine residuals and other tests as required., • Performs maintenance on lab and field equipment and instrumentation including pH meters, specific ion meters., • Changes and cleans probes, magnetic strips, floats and sensors on instrumentation., • Performs instrument calibration, including resetting of set points as assigned., • Performs facility maintenance and repair and may replace or install light bulbs, florescent tubes, and paint., • Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies., • Spends 100% of time in operations / light maintenance environment., • Typically spends 5 – 10% of time exposed to outdoor and sometimes inclement weather., • Required to work on rotating 7/24 shift schedule when shift operators are not available., • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards. Qualifications Education/Experience/Background: • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions., • Ability to perform basic mathematical calculations., • Some vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment., • Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, etc., • Must consistently demonstrate the ability to perform all assigned tasks in an accurate and timely manner., • Must demonstrate ability to efficiently operate and perform minor PM’s on a variety of equipment which may include pumps, valves, mixers, chemical feed equipment, boilers, compressors, and chillers., • Knowledge of HOA (Hand – Off – Auto) operational controls and how settings apply to operational control scheme., • Must have the ability to diagnose mechanical and process problems in multiple unit processes, troubleshoot mechanical, electro-mechanical, hydraulic or pneumatic equipment and take corrective action within policy and procedure limitations., • Good verbal and written communication skills are necessary., • Must be able to work a 12-hour shift rotation, 7/24 shift schedule (Dupont Schedule) as needed to cover operator shift as needed. Must be able to cover OT shifts as required., • Must have or be able to obtain a Class 2 New York Boiler License as required by regulatory agency at site within 6 months of start date., • Must possess a valid driver’s license and a safe driving record., • Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training., • Forklift Certification., • Class 2 City of Buffalo Stationary Engineer license., • Works in various positions; works on ladders, catwalks, and supports at heights of 30 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds., • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 50 feet., • Occasional stooping, bending or kneeling and entering confined spaces., • Required to turn valve handles and wheels on valves., • Required to use shovels for snow removal or material transfer., • Must be able safely drive a powered industrial forklift. Additional Information Pay Range: $43.00 to $50.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Fairfield by Marriott/Buffalo-Airport, 4271 Genesee Street, Cheektowaga, NY 14225 We are looking for a Maintenance Assistant to join our Team! The Fairfield Inn & Suites® by Marriott Buffalo Airport, is conveniently located across from Buffalo Airport with free airport shuttle service, you’ll also be 3 miles from Walden Galleria Mall and less than 10 miles from Downtown Buffalo. Our Fairfield has 140 beautifully appointed guest rooms, and we serve complimentary breakfast buffet to all our guests. The Fairfield by Marriott/Buffalo Airport is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. The Maintenance Assistant will be responsible for the upkeep of the hotel property, assisting the Chief Engineer. Role: • Major duties include basic repair work, painting, wall covering, plumbing, electrical work, pool operations, preventative maintenance, and indoor and outdoor grounds upkeep., • Maintains all fixtures and equipment according to the preventative maintenance schedule and records such maintenance in log books as required by BLA and hotel brand., • Maintains and services pool and spa areas including testing and recording as stated by the state and local regulations. Pay range $18.50 -$19.50 What You Bring: At least 2 years of mechanic experience in a hotel or a related field. HVAC, electrical, plumbing, boiler operations and general maintenance skills required. Must be able to bend, kneel, lift, push, carry and pull up to 75 lbs. Requires reaching overhead, climbing, crouching, and twisting. Valid drivers license required. What We Offer You: At Buffalo Lodging, we are committed to keeping our most important assets – our employees – healthy, happy and productive. To achieve this, we offer a variety of benefits including the following: • Paid Weekly (Every Friday!), • Medical, Dental & Vision Insurance, • Competitive 401 (k) Retirement Savings Plan with Generous Employer Match, • Paid Vacation and Sick Time, • Paid Holidays, • Tuition Reimbursement, • Flexible Spending Account, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • Long-Term Disability Insurance, • Employee Assistance Program, • Hotel Discounts – for You, Your Friends and Family, • Monthly Employee Appreciation Activities & Events, • Learning and Development Opportunities, • Employee Referral Program

We are looking for a hands-on Equipment Engineer with strong experience in lyophilization (freeze drying) systems to support installation, commissioning, and maintenance activities in a life sciences manufacturing environment. This is an execution-focused, field-based role—ideal for engineers who enjoy working directly on equipment rather than documentation-heavy validation work. Key Responsibilities • Perform installation, commissioning, and Site Acceptance Testing (SAT) of freeze dryers, • Execute preventive, corrective, and predictive maintenance, • Conduct temperature mapping studies, • Perform I/O checks and signal simulation, • Calibrate instrumentation loops (temperature, pressure, vacuum), • Troubleshoot mechanical, electrical, and PLC/control systems, • Support equipment start-up, testing, and performance verification, • Strong hands-on experience with lyophilization (freeze dryer) systems, • Background in pharma, biotech, or life sciences manufacturing, • Expertise in:, • Temperature mapping, • I/O checks & signal simulation, • Instrument calibration (temp, pressure, vacuum), • Experience in installation, commissioning, and SAT (execution-focused), • Solid knowledge of:, • Electro-mechanical systems, • PLC-controlled equipment & troubleshooting, • Root cause analysis

Job Title: Electrical Engineer (Permanent role) Salary: $66k - $95k/yearly + Benefits + Bonus Location: Tonawanda, NY (Onsite) Candidates should be legally authorized to work in United States. Job Summary: The role focuses on designing electrical schematics and control systems, supporting project execution, and ensuring accurate technical documentation. Design and develop electrical schematics using AutoCAD. Create power cabinet layouts and specify components. Design control systems and interface with PLCs. Maintain and revise the library of electrical design documents and CAD files. Generate Bills of Material from electrical drawings. Produce customer documentation and validation protocols as required. Provide technical support to shop floor and field service personnel as part of the project team. Consistently observe and promote Safety, Health, Environment and Quality (SHEQ) requirements on site. Skills: Bachelor's degree in Electrical Engineering. 3-5 yrs exp years of relevant experience in electrical design and engineering. Proficient in AutoCAD and other electrical design software Experience creating electrical schematics and Bills of Material. Familiarity with industry codes and standards such as NEC, IEC, and NEN1010. Ability to work from Process and Instrumentation Diagrams (P&IDs). What Would Make You a Great Fit: Experience supporting both shop floor and field service teams in a project environment. Attention to detail in maintaining and organizing design documentation. Ability to manage multiple design tasks efficiently under tight deadlines. Comfortable working in a regulated environment with international standards. We Offer Comprehensive Medical, Dental, Vision, Life and Disability Insurance, A 401(K) Retirement Plan, And Tuition Assistance. As Well As An Annual Bonus.

We are looking for a hands-on Equipment Engineer with strong experience in lyophilization (freeze drying) systems to support installation, commissioning, and maintenance activities in a life sciences manufacturing environment. This is an execution-focused, field-based role—ideal for engineers who enjoy working directly on equipment rather than documentation-heavy validation work. Key Responsibilities • Perform installation, commissioning, and Site Acceptance Testing (SAT) of freeze dryers, • Execute preventive, corrective, and predictive maintenance, • Conduct temperature mapping studies, • Perform I/O checks and signal simulation, • Calibrate instrumentation loops (temperature, pressure, vacuum), • Troubleshoot mechanical, electrical, and PLC/control systems, • Support equipment start-up, testing, and performance verification, • Strong hands-on experience with lyophilization (freeze dryer) systems, • Background in pharma, biotech, or life sciences manufacturing, • Expertise in:, • Temperature mapping, • I/O checks & signal simulation, • Instrument calibration (temp, pressure, vacuum), • Experience in installation, commissioning, and SAT (execution-focused), • Solid knowledge of:, • Electro-mechanical systems, • PLC-controlled equipment & troubleshooting, • Root cause analysis

Work on power cabinet layout and component specification. Maintain library of electrical design documents/CAD files. Bachelors Degree in Electrical Engineering or equivelent.

Senior Specialist, Electrical Engineer (Digital Hardware Design).

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer (Digital Design) Job Code: 34606 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: The L3Harris Communication Systems segment is seeking a highly motivated, team-oriented Electrical engineer experienced with Digital Design to join an engineering organization that designs and delivers leading edge communications products. This role will report directly to Hardware Engineering Manager and is responsible for successfully design PWB circuitry for number of key products. This individual will be a member of cross functional development team with hands on responsibility for leading aspects of design, integration, and testing. Strong communication and interpersonal skills couple with ability to work within a large engineering team are required. Essential Functions: • Digital hardware research, design, and development related to software defined radios., • Simulation, prototyping, schematic capture, understanding of printed wiring board and flexible circuit layout design, hands on measurement of high speed and other electrical interfaces, • Ability to prioritize tasks and issues based on technical challenge and business/revenue impact., • Diverse product development knowledge from component selection through change orders and factory implementation., • Analysis of electrical requirements to determine feasibility of design within time and cost constraints., • Extensive hands-on experience with test equipment including oscilloscopes, spectrum analyzers, network analyzers, signal generators etc. to establish operating data, conducts experimental tests and evaluate results., • Proficient in the use of high level programming languages to configure programmable logic devices, control electrical circuits, and to increase job efficiency., • Perform integration with other subsystems including RF, FPGA, DSP, embedded firmware, test equipment, etc., • Provide timely and thorough response to issues that impact continuous production and generation of revenue in in operations, • Problem-solving expertise, ability to work autonomously and with others, • Experience in emerging digital design trends (including new parts, manufacturers, capabilities, analysis) #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

Successful candidate will have a strong Analog & Digital Electrical Engineering background and experience to support critical component shortages and other design activities for L3Harris tactical radio products and accessories. Specialist, Electrical Engineer (Digital Design). Bachelors Degree i

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

Specialist, Electrical Engineer (Digital Design). Analyzes electrical requirements to determine feasibility of design within time and cost constraints. Experience designing state of the art Analog & Digital electronic circuits.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

The L3Harris Communication Systems segment is seeking a highly motivated, team-oriented Electrical engineer experienced with Digital Design to join an engineering organization that designs and delivers leading edge communications products. L3Harris provides an inclusive, engaging environment designe

The L3Harris Communication Systems segment is seeking a highly motivated, team-oriented Electrical engineer experienced with Digital Design to join an engineering organization that designs and delivers leading edge communications products. Analysis of electrical requirements to determine feasibility

Specialist, Electrical Engineer (Digital Design). Successful candidate will have a strong Analog & Digital Electrical Engineering background and experience to support critical component shortages and other design activities for L3Harris tactical radio products and accessories. Responsible for ar

A global provider of electrical solutions is seeking an experienced Technical Sales Engineer to lead presales engagements for their DTM software portfolio. The ideal candidate possesses a Bachelor's degree in Electrical Engineering or a related field, with over 3 years in technical sales or presales

Advanced Architecture & PCB Design: Proven ability to lead the full design cycle—including requirement analysis, schematic capture (using Mentor VX/DxDesigner), and complex high-speed layout analysis. Reporting to a Senior Engineering Manager, you will take ownership of the full hardware lifec

Advanced Architecture & PCB Design: Proven ability to lead the full design cycle—including requirement analysis, schematic capture (using Mentor VX/DxDesigner), and complex high-speed layout analysis. Systems Thinking: The ability to visualize cross-disciplinary impacts, such as how digital de

Job Description Job Title Senior Mechanical Engineer – Generator Systems (GenSet) Location Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs modular infrastructure supporting backup power systems, data centers, and industrial facilities. Our generator platforms integrate engines, alternators, cooling systems, exhaust systems, and electrical switchgear into prefabricated modular power solutions used for standby power, microgrids, and mission-critical facilities. Position Overview GTI is seeking a Senior Mechanical Engineer to design modular generator enclosures and integrated power platforms. The role focuses on packaging large diesel or gas generators, cooling systems, exhaust systems, and structural frames into factory-built power modules. Key Responsibilities • Design generator enclosures, equipment skids, and structural steel frames, • Package engines, alternators, radiators, and exhaust systems within modular enclosures, • Perform structural analysis of heavy equipment mounting structures and lifting frames, • Design airflow systems for engine cooling and ventilation, • Perform CFD analysis to ensure proper airflow and heat rejection, • Develop manufacturable weldments and sheet metal assemblies, • Design access systems for serviceability and maintenance, • Integrate mechanical systems with electrical switchgear and control panels, • Support prototype builds and manufacturing integration, • Lead root cause investigations tied to vibration, cooling, or structural issues Required Qualifications • Bachelor’s degree in Mechanical Engineering, • 7+ years of mechanical design experience in industrial equipment or power systems, • Experience designing structural steel assemblies and heavy equipment packaging, • Strong SolidWorks experience, • Experience with thermal and airflow analysis Preferred Qualifications • Experience with generator systems or engine-driven equipment, • Experience designing modular or containerized infrastructure, • Familiarity with standby power environments such as data centers or critical facilities GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace.

Job Description Hazen and Sawyer is seeking an Principal Electrical Engineer for our Saratoga Springs and Buffalo New York offices. As part of our electrical team you will have exceptional opportunities to provide superior solutions to our clients’ most difficult problems through a variety of water related assignments. The successful candidate will be involved in a wide range of electrical power, lighting, and motor control system design and analysis for water, wastewater, reuse, and infrastructure projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Integrating with design team from initial studies and conceptual design through construction of substation, generators, pump stations, and/or treatment facilities., • Field investigations and site visits from design through construction., • 5 – 15 years’ experience, • Bachelor’s degree in electrical engineering or electrical engineering technology (MS or MEng Preferred), • Professional Engineering license in NY, • Self-starter with attention to detail, • Candidate must possess excellent writing, communication, interpersonal, and organizational skills., • Must be proficient in all computer software typically used (e.g., Microsoft Word, Excel, PowerPoint, etc.)., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Job Title Electrical Engineer Location Buffalo, NY or Phoenix, AZ (On-Site) Department Engineering Employment Type Full-Time Company Overview GTI Fabrication is a leader in the design, engineering, and fabrication of custom modular structures, container-based systems, and complex metal assemblies. GTI supports defense, energy storage, data center, and industrial infrastructure markets, delivering fully integrated modular solutions manufactured in-house at our Buffalo, NY facility. Position Overview GTI Fabrication is seeking an Electrical Engineer with a strong focus on electrical design and drafting to support modular manufacturing programs. This role is heavily centered on creating and maintaining electrical schematics, wiring diagrams, and documentation using SolidWorks Electrical. The Electrical Engineer will work closely with mechanical engineering, manufacturing, and production teams to ensure electrical designs are accurate, manufacturable, and aligned with project requirements from concept through production. This is a design-forward, execution-oriented role embedded in the manufacturing lifecycle. Key Responsibilities • Design and develop electrical schematics, wiring diagrams, cable schedules, and panel layouts using SolidWorks Electrical, • Create, maintain, and revise electrical drawing packages to support manufacturing and assembly, • Develop electrical designs for modular systems, industrial equipment, and containerized solutions, • Collaborate with mechanical engineers to ensure proper electrical-mechanical integration, • Apply drafting standards, title blocks, revision control, and documentation best practices, • Support engineering change requests and update drawings based on production feedback, • Participate in design reviews to ensure electrical designs meet functional, safety, and manufacturability requirements, • Support troubleshooting and root cause analysis of electrical issues during build, test, and integration, • Bachelor’s degree in Electrical Engineering or a related technical discipline, • Minimum 1–3 years of experience in electrical engineering, electrical design, or drafting-focused roles, • Strong proficiency in SolidWorks Electrical, including schematic design and wiring documentation, • Experience producing electrical drawings, schematics, and wiring diagrams for industrial or manufactured systems, • Solid understanding of electrical engineering fundamentals and circuit design, • Working knowledge of industrial electrical power systems and controls, • Experience supporting manufacturing or fabrication environments, • Familiarity with panel design, harnessing, and field wiring practices, • Experience working with modular, industrial, or containerized systems, • Exposure to production support or shop-floor engineering, • Experience collaborating across mechanical, manufacturing, and quality teams

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job DescriptionDescription: Bridge Engineer– Civil/Structural Launch Your Career in Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career Bridge Engineer eager to build a strong foundation in bridge design and transportation engineering? Fisher Associates is seeking a motivated Bridge Engineer to join our collaborative Bridge and Transportation Engineering team. In this hybrid role, you will gain hands-on experience supporting bridge design, analysis, and transportation infrastructure projects that enhance safety, mobility, and connectivity in the communities we serve. You’ll also benefit from mentorship, professional development opportunities, and a clear path toward PE licensure. If you’re ready to take the next step in your engineering career and help design the bridges of tomorrow, we encourage you to apply today. About Fisher Associates: At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Engineer • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects that create positive community impact while offering diverse, challenging opportunities to grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionJob Description Job Title: Mechanical Engineer – Generator & Fuel Systems Location: Buffalo, NY Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | On-Site Company Overview GTI Energy designs and manufactures complex modular systems supporting power generation platforms, modular data center infrastructure, energy storage, defense, and industrial markets. Operating in a high-mix, engineered-to-order environment, GTI delivers integrated generator systems, steel enclosures, fuel systems, and mission-critical modular infrastructure. Our engineering team works at the intersection of design and manufacturing, where technical decisions directly impact fabrication, assembly, field installation, and long-term product performance. Position Overview GTI Energy is seeking a Mechanical Engineer to own the full mechanical design of generator systems from concept through production launch. This role is responsible for enclosure systems, base frames, fuel systems, airflow management, exhaust integration, and mechanical packaging into a manufacturable end product. The Mechanical Engineer will operate at the system level, not just component design. This role requires ownership of the physical product functioning as intended in real-world conditions while partnering cross-functionally with Electrical Engineering, Structural Engineering, Manufacturing, Supply Chain, Quality, and Operations. The ideal candidate combines strong mechanical design fundamentals with practical experience in tanks, fluid systems, thermal systems, sheet metal, weldments, and industrial equipment packaging. Key Responsibilities Generator System Design Ownership • Own full mechanical design of generator systems from concept, prototype, validation, and production release, • Develop integrated system layouts including enclosure, fuel systems, radiator systems, exhaust systems, service access, and structural packaging, • Ensure designs support manufacturability, installation, serviceability, lifting, transport, and long-term durability, • Design generator enclosures, skid bases, and structural frames that align with fabrication and assembly capabilities, • Develop layouts for component placement, maintenance access, airflow clearance, lifting points, and shipping requirements, • Design weldments, sheet metal assemblies, and bolted mechanical structures for production readiness, • Own fuel system design end-to-end including subbase tanks, belly tanks, day tanks, and associated fuel delivery systems, • Design UL 142 compliant storage tanks including double-wall construction, leak detection, venting, fill systems, and containment features, • Size fuel systems to meet runtime requirements, customer specifications, and application demands, • Define and route all fuel piping, tubing, hoses, and mechanical connections throughout the system, • Design for vibration resistance, thermal expansion, pressure integrity, and serviceability, • Ensure long-term reliability of fluid systems through proper component selection and installation methods, • Own generator airflow and thermal system performance including intake air, radiator integration, compartment cooling, and exhaust heat management, • Design airflow paths to ensure operation at worst-case ambient conditions without derating or overheating, • Evaluate fan performance, pressure drop, recirculation risks, and enclosure heat rejection, • Design exhaust routing, silencers, flex sections, and thermal shielding while maintaining acceptable backpressure limits, • Coordinate packaging space and provisions for aftertreatment or emissions equipment where required, • Drive manufacturable designs aligned with welding, fabrication, machining, paint, and final assembly capabilities, • Work directly with shop personnel to resolve fit-up, tolerance, and production issues quickly, • Improve designs based on production feedback to reduce labor hours, improve quality, and increase repeatability, • Participate in prototype builds, heat runs, system validation, and production troubleshooting, • Diagnose root causes of thermal, fuel, vibration, packaging, or durability issues and implement corrective actions, • Support continuous improvement through Root Cause Analysis, 5 Whys, and Fishbone methodologies, • Partner with Electrical Engineering on controls, harness routing, battery systems, and integrated power components, • Coordinate with Supply Chain on sourced components, lead times, and alternate part qualification, • Support Quality and Operations teams during launch, production ramp, and field issue resolution, • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 5–10+ years of mechanical engineering experience in generator systems, industrial equipment, mobile equipment, power systems, HVAC, tanks, fluid systems, or similar hardware environments, • Experience designing weldments, sheet metal assemblies, mechanical packaging, and fabricated systems, • Strong understanding of fuel systems, piping, pumps, filters, valves, and fluid hardware integration, • Experience with thermal systems, airflow management, cooling systems, or heat rejection design, • Proficiency with CAD tools such as SolidWorks, Inventor, Creo, or similar platform, • Experience with diesel or natural gas generator systems, • Familiarity with UL 142 fuel tank requirements or related fuel storage standards, • Experience with modular data center power systems, standby power, or mission-critical infrastructure, • Background in fabrication-heavy or contract manufacturing environments, • Experience with FEA, CFD, or thermal modeling tools, • Exposure to Lean Manufacturing, Continuous Improvement, or new product introduction (NPI) processes

Job DescriptionDescription: Ferguson Electric’s Electrical Engineer II is a mid-level position for engineers focusing on becoming self-sufficient on design and engineering tasks. This position will contribute to the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer II role will provide guidance to junior staff as needed, assist in managing project deliverables, and support the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. RESPONSIBILITIES • Electrical Systems Design:, • Design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial and industrial projects., • Support the development of project design goals, specifications, and strategies to meet client requirements and project objectives., • Participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Help ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Help specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with minimal supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports with minimal experience., • Develop relay programs with minimal guidance., • Support service technicians with troubleshooting customer electrical system problems under the guidance of higher-level engineers., • Project Leadership:, • Support the coordination of electrical engineering aspects of projects, helping adhere to budgets, schedules, and quality standards., • Participate in project team and client meetings to align on project scope, progress, and deliverables., • Assist in the preparation of construction documents, including drawings and specifications., • Site Engagement:, • Participate in job site visits to observe existing conditions, monitor construction progress, and learn about compliance with design specifications., • Attend construction meetings and provide basic technical support to field teams and subcontractors as needed., • Perform physical walk-throughs of sites under supervision to assess conditions and resolve issues., • Process Improvement:, • Contribute to strategies to improve design quality, coordination, and efficiency in production efforts., • Support the incorporation of renewable and sustainable design practices where applicable to enhance project outcomes. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering from an ABET-accredited program required and preferred with electrical systems focus., • 4-6 years of experience in electrical engineering, with a focus on commercial or industrial projects., • Engineer-in-Training (EIT) certification is required or additional 5 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM) is preferred., • Good understanding of designing power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is preferred., • Ability to read and understand construction drawings and specifications., • Basic understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Good leadership and mentorship skills to contribute to team efforts., • Good communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Precast Design Engineer • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Create meaningful community impact through engaging precast engineering projects while advancing your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Electrical Engineer, Buffalo/Amherst Join Kistler – A Global Leader in Measurement Technology! At Kistler, we’re revolutionizing industries with our cutting-edge dynamic measurement technology, helping customers optimize products and processes. From automobile development to smart factories, our Swiss-designed sensor solutions are driving the future of electrified drive technology, industrial automation, and emission reduction. Purpose of the Position The Electrical Engineer will take full technical ownership of electronics development for Kistler’s sensor and instrumentation product portfolio. This includes schematic design, PCB layout, simulation, prototyping, testing, and compliance for both analog and digital systems. This role ensures profitable, reliable, and high-quality manufacturing operations by overseeing production, logistics, planning, purchasing, quality, and facility operations. The position drives operational excellence and competitiveness through continuous improvement across quality, cost, and delivery performance while ensuring production capacity supports regional business growth. Main Tasks Electronics Design & Development • Design, simulate, and validate analog, mixed-signal, and digital circuits for sensor signal conditioning, data acquisition, and embedded instrumentation., • Develop complete electrical design packages including detailed schematics, PCB layouts, BOMs, stack-ups, and manufacturing documentation., • Perform SPICE and circuit simulations to optimize performance, noise, signal integrity, and power consumption., • Lead PCB layout with strong understanding of grounding, shielding, controlled impedance, and DFM/DFT practices., • Ensure designs meet CE, RoHS, REACH, PFAS, and other compliance requirements., • Coordinate and support EMC, safety, and environmental testing., • Work closely with mechanical, firmware, software, product management, and manufacturing teams., • Provide electrical expertise during NPI, design reviews, FMEAs, and root-cause analysis., • Own schedules, deliverables, and budgets for assigned electronics work packages., • Provide mentorship and direction to junior engineers or contractors., • Interface with suppliers, PCB manufacturers, and external labs. Requirements Profile • Bachelor of Science in Electrical Engineering, or related Engineering field, from an accredited four-year college., • 4-7 years of experience in instrument design or transducer electronics design., • Extensive experience in the design, manufacture, and testing of electronic instrumentation including analog and digital systems., • Knowledge of compliance requirements related to restrictions on hazardous substances preferred. RoHS, Reach, PFAS, etc, • Experience with AS9100 requirements., • Familiarity with CAE for circuit synthesis and analysis, Altium preferred., • Ability to use Labview and TestStand preferred., • Experience in problem identification and corrective action., • Good written and verbal communication skills., • Strong project management skills., • Background in transducer electronics or sensor-based instrumentation a plus., • Travel less than 5%, • Physical Requirements: Ability to sit at a workstation up to 60% of the workday; stand and walk up to 30%; manual dexterity 10%. Why Kistler? At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: • Medical, dental, vision, life, and disability coverage, • 401(k) plan with a 4% company match, • Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job Description Job Title Senior Mechanical Engineer – Modular Data Centers Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI engineers modular data center infrastructure that integrates structural enclosures, cooling systems, power distribution equipment, and server infrastructure into factory-built modular systems. These prefabricated modules enable faster deployment of computing capacity for hyperscale, enterprise, and edge computing environments. Position Overview GTI is seeking a Senior Mechanical Engineer to design modular data center enclosures and cooling systems supporting high-density computing environments. Key Responsibilities • Design structural enclosures and modular steel assemblies for prefabricated data centers, • Develop equipment layouts supporting racks, power distribution equipment, and cooling systems, • Design cooling airflow systems supporting high-density computing loads, • Perform CFD modeling to optimize airflow and thermal performance, • Design HVAC integration including DX systems, chilled water systems, and airflow containment, • Perform structural analysis for transport, lifting, and installation loads, • Develop manufacturable designs for factory-built modular infrastructure, • Coordinate mechanical systems with electrical power distribution infrastructure, • Support prototype builds and factory testing Required Qualifications • Bachelor’s degree in Mechanical Engineering, • 7+ years of experience designing HVAC systems, industrial enclosures, or modular infrastructure, • Strong experience with thermal management and airflow analysis, • SolidWorks experience designing large structural assemblies Preferred Qualifications • Experience with data center cooling systems, • Experience designing prefabricated infrastructure or modular buildings, • Experience with high-density computing environments GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace.

Job Description Job Title Senior Electrical Engineer Location Buffalo, NY (On-Site or Hybrid depending on program needs) Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and industrial markets. GTI delivers fully integrated, engineered-to-order solutions including Battery Energy Storage Systems (BESS), generator-backed power systems, and modular data centers manufactured in-house. Position Overview GTI is seeking a Senior Electrical Engineer to lead electrical system design and development across advanced modular programs, including BESS, GenSet-based power systems, and modular data center infrastructure. This role owns electrical architecture, schematic development, and technical execution for complex power and control systems operating across varying voltage levels and power capacities. The Senior Electrical Engineer serves as a technical authority, working closely with mechanical engineering, manufacturing, supply chain, and project teams to ensure designs are safe, scalable, manufacturable, and compliant with applicable standards. This role requires strong experience in power distribution, control systems, and electrical documentation within industrial or energy-focused environments. Key Responsibilities Electrical System Design & Architecture • Lead electrical system design for Battery Energy Storage Systems (BESS), generator systems, and modular data center power infrastructure, • Develop electrical architectures supporting varying levels of power generation, storage, and distribution, • Design AC and DC power systems, including low-voltage and medium-voltage applications as required by project scope, • Create and maintain detailed electrical schematics, wiring diagrams, and single-line diagrams using SolidWorks Electrical or equivalent, • Develop panel layouts, cable schedules, and interconnection diagrams, • Ensure electrical documentation is complete, accurate, and production-ready, • Design electrical systems integrating battery systems, inverters, transformers, generators, switchgear, and protection devices, • Support parallel operation, load sharing, and backup power configurations, • Design control and monitoring interfaces between power systems and control platforms, • Support electrical design for modular data center infrastructure including power distribution units (PDUs), UPS systems, generators, and switchgear, • Design redundant and fault-tolerant power architectures (e.g., N+1, 2N), • Partner with Mechanical Engineering to ensure electrical designs integrate with enclosures, thermal systems, and physical layouts, • Support Manufacturing Engineering with design-for-manufacturability and build strategy input, • Provide technical guidance to production teams during build, test, and integration, • Ensure designs comply with applicable electrical codes and standards such as NEC, UL, IEC, and project-specific requirements, • Support UL-listed and customer-certified system designs, • Serve as a technical lead on assigned programs, • Support project planning, technical risk identification, and issue resolution, • Bachelor’s degree in Electrical Engineering or related discipline, • 8+ years of experience in electrical engineering roles within industrial, energy, or infrastructure environments, • Strong experience designing power systems across varying voltage and power levels, • Proven experience developing electrical schematics and documentation, • Experience with power generation, energy storage, or critical power infrastructure, • Experience with Battery Energy Storage Systems (BESS), • Experience with generator systems, paralleling switchgear, and backup power architectures, • Experience supporting modular data centers or mission-critical infrastructure, • Proficiency with SolidWorks Electrical, • Experience supporting UL-listed or code-compliant system designs, • Prior experience in modular, containerized, or engineered-to-order manufacturing environments

Job Description Job Title Senior Electrical Engineer – Modular Data Centers Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. Position Overview GTI is seeking a Senior Electrical Engineer to design the electrical architecture of modular data center power systems supporting high availability computing environments. Key Responsibilities • Design electrical systems for modular data centers including UPS systems, switchgear, and power distribution units, • Develop single line diagrams, electrical schematics, and cable schedules, • Design redundant power architectures such as N+1 and 2N systems, • Integrate UPS systems, batteries, generators, and electrical distribution infrastructure, • Develop monitoring and control systems for critical power infrastructure, • Coordinate electrical design with mechanical cooling systems and equipment layouts, • Support commissioning and factory testing of modular data center systems, • Develop electrical documentation supporting production and field deployment Required Qualifications • Bachelor’s degree in Electrical Engineering, • 8+ years of experience in critical power or data center electrical design, • Experience with UPS systems, switchgear, and power distribution infrastructure, • Experience developing electrical schematics and production documentation Preferred Qualifications • Experience designing modular data centers or prefabricated critical power systems, • Familiarity with Tier data center reliability architectures, • Experience integrating generator backup systems GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace.

Job Description Electrical Engineer This role is responsible for designing electrical schematics and control systems, supporting project execution, and ensuring accurate technical documentation. The position focuses on schematic and cabinet design and does not require PLC programming experience. Key Responsibilities • Design and develop electrical schematics using AutoCAD, • Create power cabinet layouts and specify electrical components, • Design control systems in accordance with project requirements, • Maintain and update electrical design documentation and CAD libraries, • Generate Bills of Material (BOM) from electrical drawings, • Prepare customer documentation and validation protocols, • Provide technical support to shop floor and field service teams, • Bachelor’s degree in Electrical Engineering, • 3–5 years of experience in electrical design and engineering, • Proficiency in AutoCAD and electrical design software, • Experience developing electrical schematics and BOMs, • Knowledge of applicable codes and standards (NEC, IEC, NEN1010) Equal Opportunity Employer GCR provides equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, disability, or genetic information. GCR is an Equal Opportunity/Affirmative Action Employer committed to workforce diversity. Company DescriptionGCR Professional Services is an engineering and information technology staffing firm (direct-hire, consultants, contract-to-hire).GCR Professional Services is an engineering and information technology staffing firm (direct-hire, consultants, contract-to-hire).

Job DescriptionSalary: 75000-85000 Project Engineer - Electrical Position Summary: In support of the Companys primary and single most important objective, which isTO GET AND KEEP PROFITABLE CUSTOMERS, this individual is responsible for the design of low voltage power distribution, motor control, PLC control, and network design aspects of SAMCO's custom water, wastewater, and process separation solutions for industry. Successes of the position are measured via the following key indicators: • Timely and accurate completion of electrical designs for projects, • Successful coordination of design efforts with process engineering and programming teams, • Compliance with safety and regulatory standards, including NFPA 70, NFPA 79, and UL 508A, • Development of one-line diagrams and network architecture, • Specification of control hardware, including PLC components, HMIs, VFDs, and network components, • Creation of PLC-based control panel and low voltage motor starter panel wiring schematics, panel layout drawings, and bills of materials, either directly or by supervision of in-house or outsourced design resources, • Raceway/cable sizing and routing, • Coordination with project process engineering and programming teams to provide a complete and functional system, • Support purchasing and manufacturing activities related to panel and assembly construction, • Perform or support factory acceptance testing and troubleshooting, • Support field service team during system commissioning and startup, which may include remote or on-site work, • Development and refinement of SAMCO standards and documentation of best practices related to electrical and control system design, • Bachelors degree in Electrical Engineering or related field, • Minimum of 1 year of experience in electrical engineering, • Proficiency in schematic drafting with AutoCAD (or equivalent), • Strong knowledge of motor power and control circuit design, • Expertise in PLC-based control hardware specification and power/control/signal circuit design, • Experience in industrial networking design and specification (Ethernet, Profinet), • Familiarity with the application of NFPA 70, NFPA 79, and UL 508A to process equipment control systems, • Hands-on experience with wiring, testing, and troubleshooting low voltage power and control wiring for process systems, • Experience with PLC program troubleshooting and development, • Standard office environment, • Field construction environment, • Standard physical requirements for a typical office environment, • Field/in-plant physical activities (e.g., climbing, lifting, standing, and walking continually), • Hearing and visual acuity necessary to be aware of and manage safety hazards and environmental issues in the manufacturing and field settings

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description Senior Electrical Designer- Solar PV, BESS & Microgrid Why This Role Matters: As a member of the BSE Team, the Senior Electrical Designer works with the design team to plan, design, and oversee the installation of building systems on a variety of project types. In this role, you will design building systems for projects across our practice areas, improving the built environment, and creating a more sustainable world in the process. As a member of the BSE team, you have developed a deep expertise in a building systems specialty and have experience in design coordination as part of a multi-disciplinary team. The Senior BSE Designer works independently on moderately to highly complex projects. What You’ll Do: • Perform Codes and Standards review. Discuss interpretation with Engineer of Record (EOR), if required, • Perform Revit drafting and comply with company standards, • Lead project design efforts and communicate with EOR, • Perform site investigations and document existing conditions, • Oversee the development of Revit drawings – plans, details, schematics, and schedules, • Attend internal coordination meetings and communicate with other disciplines, • Attend client meetings and participate in project scope development, • Communicate engineering concepts clearly with clients, • Prepare engineering reports and opinions of probable construction costs, • Perform building condition evaluations and prepare reports, • Produces designs that have minimal QA/QC comments and minimal drawing presentation mistakes, • Prepare specifications, • Ability to design within a construction budget, • Review and approve submittals and shop drawings, • Perform construction punch lists, • Attend construction meetings, • Assist CPL senior leadership with proposal efforts as required, • AS Degree required, professional degree in Electrical Engineering preferred, • A minimum of eight (8) years of experience, • Ability to perform difficult technical computations and consolidate acquired data, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines, • Familiarity with building systems such as HVAC, plumbing, power distribution, lighting and low-voltage systems, and structural components, • Working knowledge of Revit and other relevant design programs, • Proficient in utilizing Microsoft Office tools, • Strong verbal, written, and interpersonal skills, • Engineering, analytical, and technical writing skills with attention to detail, • An understanding of construction plans/specifications To regular full-time and part-time employees who regularly work 30 or more hours per week • Healthcare for you and your family: Medical, Dental& Vision insurance. Single HDHP Medical plan with 100% paid premium, • Health Savings Account (HSA) with employer match, • Medical and Dependent Care Flexible Spending Accounts, • Long-Term Disability Insurance Company/team member sharing, • FREE Life Insurance and AD+D Insurance + Voluntary Life Insurance for you and your family., • FREE Short-Term and Long-Term Disability Insurance., • PTO + Sick Time + 8 Holidays a year., • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Internal Mobility & Career Advancement. We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law.

Job DescriptionJob Title: Electrical EngineerLocation: Buffalo, NY Hire Type: Direct HirePay Range: $85,000 - $105,000Work Type: Full-timeWork Model: OnsiteWork Schedule: Monday – Thursday, 6am – 4pmRecruiter Contact: Sean Pebbles, 716-256-1259, & Scope:Positional OverviewThe Imagine Group is recruiting for an Electrical Engineer on behalf of our client, a leading global manufacturer and supplier of high-performance copper and copper-alloy materials in Buffalo, NY, supporting a wide range of industries including automotive, electronics, and energy. The organization operates advanced production facilities that manufacture strips, sheets, and other semi-finished metal products used in electrical components, heat exchangers, and industrial applications. Known for its focus on innovation and sustainable manufacturing, the company partners with customers to deliver reliable materials that support modern infrastructure and emerging technologies. In this role, you will be responsible for designing, maintaining, and improving electrical systems that support manufacturing equipment and plant operations. You will troubleshoot electrical and control system issues, support equipment upgrades, and implement solutions that enhance reliability, safety, and production efficiency. Additionally, you will collaborate with engineering, maintenance, and production teams to optimize automation systems and support continuous improvement initiatives.Role & Responsibility:Tasks That Will Lead to Your Success • Analyze recurring equipment problems, recommend and implement long-term solutions to increase plant productivity and efficiency., • Duties include planning, scheduling, design, supervision, implementation, commissioning, and creating/modifying documentation and drawings of electrical/electronic projects on a small/medium scale., • Maintain and enhance plant electrical/electronic schematics and literature to provide sufficient technical resources of information and minimize electrical/electronic breakdown time., • Maintain system software backups and system documentation., • Instruct peers on updated troubleshooting techniques and attend pertinent training programs and seminars to acquire state-of-the-art knowledge of electrical/electronic industrial systems., • Maintain spare parts and test equipment to ensure effective maintenance and repair of all plant electrical/electronic equipment., • Ensure a safe and healthy work environment by adhering to company policies. Promote a climate of positive labor relations by adhering to the labor contract., • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes including batteries and lamps, as well as spent aerosol cans (HW).Skills & ExperienceQualifications That Will Help You Thrive, • BS/BT degree in Electrical Engineering, • Two (2) years of industrial experience, including PLC, AC/DC drives, industrial instrumentation, motor controls experience required; Five (5) years industrial experience preferred, • Six Sigma certification preferred

Job DescriptionCompany Description TOMRA Food is a multinational organization and a leading provider of sensor-based sorting, peeling and integrated post-harvest solution for the food industry. Transforming global food production to maximize food safety and minimize food loss by making sure Every Resource Counts™, has been our strength for over 50 years. At TOMRA, we want people to innovate, show passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We value passion that focuses and commits to meeting success. We believe in a responsible and safe mindset that takes care of our customers, products, and fellow employees. Job Description The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge food sorting equipment. This role aims to ensure the seamless operation of TOMRA's solutions, maximize equipment performance and enhance customer satisfaction. Primary Job Functions • Perform field service work at customer sites which includes installation, commissioning, testing, integration, optimization, maintenance and repair, ensuring full functionality according to machine specifications., • Perform all mechanical, electrical, electronic and optical tuning and setup., • Analyze, evaluate and diagnose equipment; troubleshooting machine problems through to resolution., • Perform preventative maintenance including preseason service, postseason service and enhancing ongoing performance of machines., • React in a prompt and professional manner to customer machine issues in the field. Where an easy fix is not possible, ensure customer is well informed of the next steps and potential costs., • Address customer complaints and if necessary, escalate to appropriate stakeholders., • Maintain close relationships and work collaboratively with engineering, research & development, sales, customer solution delivery and other internal stakeholders for continuous improvement activities, to advise on any potential sales opportunities and to successfully complete projects. Contribution and collaboration is vital whether its research and development site testing, refurbishment, refitting, upgrades or new installs, all projects require teamwork., • Act as the voice of the customer in the value chain to improve products systems and services, by reporting on feedback and comments received in the field leadership, research and development, or sales., • Assist with training and development of new Field Service Engineers, as requested., • Instruct and train customers on operation of machine, utilization and required maintenance of the systems., • Manage and control tools, test equipment, technical documentation and other assigned equipment., • Embrace related assignments and responsibilities as required to contribute to the overall success of the team., • Promote a “Safety First” culture throughout the company, our customers, and our industry.Qualifications Required: • An Associate's degree in electrical, electronic, automation, mechanical, mechatronics, sustainable manufacturing, or industrial engineering is preferred or combination education and equivalent experience is accepted., • Relevant knowledge of electronics/electrical assembly and wiring., • Strong understanding / knowledge of electronics and electrical assembly and wiring., • Proven to read, analyze and interpret technical procedures and/or governmental regulations., • Assist and support customers in a professional manner, • Ability to establish and maintain effective working relationships with customers, internal and external associates and management, • Excellent communication skills and the ability to deal effectively with customers in the English language as necessary., • Competent with Microsoft Office – Word, Excel and Outlook, • Two plus years’ experience in field service and customer support., • Two plus years’ experience in PC building, repairing and diagnostic testing., • Two plus years’ experience in installing software on PC’s., • Experience with packaging and or printing machinery a plus, • Experience engaging with customers in a service delivery environment, • Experience in electronic system troubleshooting a plus., • Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits., • Working knowledge of basic test equipment such as oscilloscopes and voltmeters., • Knowledge of computer hardware and configurations., • Ability to work in Food processing plants, farms, cold storage facilities, and outside in high/low temperatures., • Willing to travel for at least 70% of the time, domestic and internation travel based on a flexible schedule; includes weekends and/or holiday travels., • Ability to drive without restrictions in residency country. Additional Information Pay Band For U.S. applicants, in accordance with applicable disclosure requirements, the anticipated annual base pay range for the Field Service Engineer position is $25.67 to $32.46. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Also, certain positions are eligible for additional forms of compensation such as bonuses. Why work for us: Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste. We love innovation, a collaborative environment where idea sharing and thinking outside the box is encouraged. What we offer: • Comprehensive medical, dental, and vision plans with 100% employee premium coverage, • 31 days of PTO annually (vacation, sick, and holidays), increasing with tenure, • 401(k) with 100% match on the first 4% of your contributions, • 8 weeks of fully paid parental leave for eligible employees, • Up to 4 days of paid bereavement leave to support employees during personal loss, • Employee Assistance Program supporting mental, emotional, and financial well-being, • Inclusive culture that values diversity, well-being, and teamwork TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job DescriptionDescription: Fisher Associates is seeking a Senior Highway Transportation Engineer (PE) with 20+ years of progressive highway and roadway design experience, including NYSDOT projects, to serve as a technical leader within our Infrastructure + Mobility team. This role is well suited for a seasoned Professional Engineer who is driven by technical excellence, sound engineering judgment, and the opportunity to shape meaningful transportation improvements within the communities we serve. With a strong backlog of transportation work and a major upcoming NYSDOT project, this role offers immediate involvement in high-profile, technically complex assignments for state and municipal clients. As a Senior Highway Engineer, you will serve as a technical authority on roadway reconstruction, corridor improvements, intersection upgrades, and other transportation infrastructure projects. You will provide advanced design oversight, ensure quality and regulatory compliance, guide engineering standards, and mentor staff while strengthening our transportation practice. This position offers the opportunity to apply your expertise to impactful projects you can see take shape, delivering roadway solutions that enhance safety, mobility, and long-term performance across the region. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Senior Highway Transportation Engineer • Serve as senior technical lead and subject matter expert for the development of highway design plans and construction cost estimates for new and rehabilitation projects., • Perform and oversee advanced geometric roadway design, including alignments, profiles, cross-sections, grading, and interchange layouts., • Manage complex design challenges independently., • Serve as the technical authority conducting comprehensive reviews to ensure quality, constructability, and compliance with applicable standards., • Opportunity to serve as Engineer of Record, assuming full responsibility for the technical integrity of roadway design documents., • Ensure compliance with state and local design standards, regulations, and safety requirements., • Support project managers in maintaining scope, schedule, and budget alignment., • Provide technical support during construction, including responding to RFIs and participating in site visits., • Lead coordination with clients, subconsultants, regulatory agencies, and internal teams., • Professional Engineering License (PE), • B.S. degree in Civil Engineering or related field (MS preferred), • 20+ years of progressive highway design experience, • Advanced proficiency in MicroStation or OpenRoads., • Experience working with and adhering to NYSDOT design standards, • Demonstrated experience serving as senior technical reviewer and design authority., • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation will vary based on experience, qualifications, and other factors. The listed salary range does not guarantee specific pay or reflect total compensation and excludes the value of benefits. Why You’ll Love Working at Fisher • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Lead meaningful highway design work, influence technical standards, and grow your career within a firm that values expertise and leadership. We offer competitive compensation and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid #LI-CA1

Job DescriptionDescription: Bridge Design Engineer - Civil/Structural Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer with a civil or structural engineering background to join our growing Bridge and Transportation Engineering team. This role offers the opportunity to work on impactful bridge design and transportation infrastructure projects that enhance safety, resilience, and connectivity in the communities we serve. Whether you are already licensed or pursuing your Professional Engineering (PE) license, you’ll receive mentorship and hands-on experience across a variety of bridge and transportation projects. As a Bridge Design Engineer, you will collaborate with experienced professionals on the design, analysis, inspection, and rehabilitation of bridges, applying current DOT standards and industry best practices. This is an excellent opportunity to grow your career in bridge engineering and transportation infrastructure while making a lasting public impact. If you’re ready to advance your career and help shape the infrastructure of tomorrow, we encourage you to apply today. About Fisher Associates: At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Design Engineer • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Ensure all designs comply with applicable state and local standards, regulations and safety codes., • Support project managers with schedules, documentation, and presentations., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience with a background in structures/bridge design., • EIT required; Professional Engineering (PE) license preferred or ability to obtain licensure., • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge design engineering projects while gaining diverse, challenging experience that supports your professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Transportation & Highway Technical Manager – Civil Engineering Fisher Associates is seeking a Transportation & Highway Technical Manager / Civil Engineer to provide senior-level technical leadership on highway and roadway design projects throughout Upstate New York. This role is ideal for an experienced Civil Engineer or Transportation Engineer who is passionate about transportation infrastructure, roadway design, and mentoring engineering teams. As a Technical Manager, you will lead hands-on highway and roadway design, guide engineering staff, and ensure high-quality project delivery for clients including NYSDOT and local municipalities. You will play a key role in technical decision-making, project quality, and team development while helping deliver impactful transportation infrastructure projects across the region. Join a firm where your expertise is valued, leadership is encouraged, and your work has lasting impact. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Transportation & Highway Technical Manager • Deliver transportation projects that improve mobility, safety, and quality of life in local communities., • Foster a high-performing, motivated team through clear expectations, constructive feedback, mentoring, and career development., • Oversee the design and execution of highway engineering projects, ensuring compliance with industry standards, regulations, and client requirements., • Serve as a technical lead, guiding the team on best practices, decisions, and troubleshooting as needed., • Implement and oversee quality control processes and conduct technical audits to ensure high standards., • Maintain effective communication with project managers, clients, and cross-functional teams., • Ensure effective resource allocation, adequate staffing, and utilization to meet project and team goals., • Assist in recruiting top engineering talent who align with the team’s technical excellence and company culture., • Lead continuous improvement initiatives to enhance team performance., • Stay current with transportation design trends and emerging technologies, integrating them into project solutions., • Contribute to the organization's technical strategy and help forecast future technical needs. Requirements: What You Bring, Your Expertise as a Transportation & Highway Technical Manager • B.S. degree in Civil Engineering, • 8-15 years’ experience in transportation, roadway, or highway engineering, • Professional Engineering License (PE) preferred or ability to obtain it, • Prior staff management preferred, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYSDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Lead and contribute to meaningful transportation projects that improve local communities while advancing your technical leadership and career growth. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Job Title: Quality Assurance Specialist – RMA Department: Quality Reports To: Quality Engineer Job Status: Full-Time FLSA Classification: Non-Exempt Hours: Monday – Friday, 7:30 a.m. – 4 p.m. Salary/Wage Rate: $24.00 - $29.00/hour Tectran Manufacturing Inc. is an industry-leading manufacturer of air, hydraulic, and electrical systems for the transportation industry, serving heavy-duty tractor-trailer and bus markets. We are committed to delivering innovative, durable, and high-performance products that meet demanding customer and regulatory requirements. Job Summary The Quality Assurance & RMA Coordinator manages the full Return Merchandise Authorization (RMA) lifecycle while supporting Quality Assurance initiatives that improve product reliability and customer satisfaction. This role combines hands-on failure analysis, regulatory compliance, data reporting, and cross-functional collaboration to drive continuous improvement and reduce product returns. Responsibilities: RMA Management & Failure Analysis • Manage end-to-end RMA process from intake through disposition, • Review and validate warranty eligibility, • Perform product teardown, testing, inspection, and root cause analysis, • Determine and communicate disposition (repair, replace, credit, reject, return to stock), • Track and analyze RMA metrics, including turnaround time and failure trends, • Inspect and evaluate raw materials, assemblies, and finished goods, • Perform and document testing per internal and customer requirements, • Investigate non-conforming materials (NCMR) and coordinate containment and rework, • Support Corrective and Preventive Actions (CAPA), • Ensure compliance with DOT, FMVSS, ISO 9001, ISO 14001, SAE, and other applicable standards, • Partner with Engineering on root cause investigations and product improvements, • Provide feedback to Manufacturing on defect trends and systemic issues, • Collaborate with Production, Supply Chain, Customer Service, and suppliers to resolve quality concerns, • Participate in continuous improvement initiatives to reduce RMAs and improve processes Education & Experience: • High school diploma or equivalent required, • Experience in product failure analysis and material evaluation, • Experience in a manufacturing or distribution environment preferred, • Electro-mechanical product experience preferred, • Bilingual (English/Spanish) a plus Technical Skills • Proficiency with inspection equipment (CMM, optical comparators, hand measurement tools), • Ability to read and interpret technical drawings/blueprints, • Working knowledge of manufacturing and assembly processes, • Experience with quality tools (5-Why, Fishbone, Pareto, 8D), • Proficiency in Microsoft Office, • Working knowledge of Internal Auditing; experience with planning and executing audits preferred, • Experience with basic in-house calibration of precision hand tools (calipers, micrometers) is preferred but not required Core Competencies: • Strong analytical and problem-solving skills, • Excellent written and verbal communication, • Highly organized and detail-oriented, • Self-motivated, proactive, and results-driven, • Collaborative team player Safety Requirements: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Prolonged computer work and desk time, • Frequent standing, walking, and bending throughout facility, • Ability to lift up to 50 lbs, • Frequent use of hand dexterity and near vision Perks: • Health, Dental, Vision, Life and AD&D, and various voluntary insurance coverages, • 401(k) program with a company match, • Wellness program, • Paid time off (PTO) and holiday pay (10 days annually), • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. Monday - Friday, 7:30 a.m. - 4 p.m.

Job Description We are currently hiring an Electrical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses and design. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Electrical Engineer will work with our team in a lead role on a variety of decarbonization/electrification/renewable energy projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Design building electrical systems, • Design photovoltaic, battery storage systems, and grid interconnection, • Field investigations to document existing conditions, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 2-4 years of relevant experience, • Bachelor’s degree in Electrical Engineering is preferred, • Well-rounded experience in building electrical system and/or distributed energy system design, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $70,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Summary The Senior Rotating Equipment Engineer serves as a technical authority for engine‑driven rotating equipment packages— including gas/diesel engines driving compressors, pumps, and generators. The role supports specification, design, vendor review, testing, troubleshooting, and lifecycle engineering for packaged rotating machinery used in industrial and energy applications. Key Responsibilities Design & Technical Leadership • Lead selection, specification, and evaluation of engine‑driven equipment packages., • Develop/review datasheets, specifications, requisitions, and vendor documentation., • Review performance curves, vibration analyses, design calculations, and engine ratings., • Ensure compliance with API-614, ISO, ASME, and OEM standards., • Support alignment, mounting, foundations, and skid design., • Develop maintenance strategies, conduct failure analyses, and support reliability programs., • Write detailed equipment specifications and purchase orders., • Oversee testing and commissioning activities to ensure performance spec is met., • Create/maintain testing work instructions and ITPs., • Coordinate with Production, QC, and Test teams to ensure test readiness., • Ensure safe design, installation, and operation of all rotating equipment., • Mentor junior engineers and work cross‑functionally with mechanical, electrical, process, and production teams., • Strong customer communication and multi‑tasking abilities., • Ability to troubleshoot, test, and service technical equipment., • Familiarity with API, ASME, NEC/IEC/CSA codes and rotating equipment (compressors, pumps, gears, motors, expanders, generators)., • Hands‑on approach and ability to work independently., • Bachelor’s degree in Mechanical Engineering or related field., • 8–15+ years of rotating equipment engineering experience., • Experience with gas/diesel engines, compressors, pumps, generators, and skid‑mounted systems., • Understanding of rotor dynamics, vibration, lubrication, sealing, and alignment., • Travel for meetings, commissioning, and field service., • Prepare detailed field service reports and maintain site‑visit logs., • Perform other duties as assigned.