Electrical engineer jobs in Atlanta, GeorgiaCreate job alerts

Additional Information Job Number25160118 Job CategoryEngineering & Facilities LocationW Atlanta Downtown, 45 Ivan Allen Jr. Boulevard, Atlanta, Georgia, United States, 30308___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver’s License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25167419 Job CategoryEngineering & Facilities LocationCourtyard by Marriott Atlanta Executive Park/Emory, 1236 Executive Park Drive, Atlanta, Georgia, United States, 30329___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job DescriptionLeading semiconductor manufacturer with competitive compensation, generous bonus, and stock options! Also offering relocation bonus and/or visa sponsorship as needed. Must be willing to relocate to Atlanta, GA This Jobot Job is hosted by: Michael Ramsey Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $125,000 - $200,000 per year A bit about us: Leading IC design company dedicated to providing high-performance, low-power IC solutions for cloud computing and data center markets. This is a great opportunity to work with other global team members to design building blocks for various products as well as an entirely new product for the company! Must be willing to relocate to Atlanta, GA! Why join us? • Salary: $125,000 to $200,000, • Annual performance-based bonus (10% to 15%), • Stock options, • Hybrid work opportunity, • Visa sponsorship and/or relocation bonus as needed Job Details Job Details: We are seeking an experienced and dynamic Permanent Digital Design Engineer to join our dynamic engineering team. The ideal candidate will be responsible for designing and implementing cutting-edge digital circuits and systems, with a focus on RTL (Register Transfer Level) design. This is an exciting opportunity to work with a team of passionate engineers who are dedicated to creating innovative solutions that shape the future of the engineering industry. Responsibilities: 1. Develop RTL designs using hardware description languages (HDL) such as Verilog and SystemVerilog., 2. Utilize scripting languages like TCL and Python to automate and optimize design flows., 3. Perform synthesis, place and route, and timing closure using tools such as Innovis and Synopsys., 4. Conduct RTL design verification using tools like SimVision., 5. Collaborate closely with the team to implement power management IC (PMIC) designs., 6. Work with the team to debug and resolve design and flow issues., 7. Perform static timing analysis and address timing closure issues., 8. Develop and optimize designs for power, performance, and area., 9. Work in a Linux environment and use tools like Virtuoso for custom layout., 10. Participate in design reviews and contribute to the development of specifications and architecture., 11. Collaborate with cross-functional teams to ensure design objectives are met. Qualifications: 1. Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field., 2. Minimum of 5 years of experience in RTL design and verification., 3. Proficiency in hardware description languages (HDL) such as Verilog and SystemVerilog., 4. Strong experience with scripting languages like TCL and Python., 5. Experience with synthesis, place and route, and timing closure tools such as Innovis and Synopsys., 6. Familiarity with RTL design verification tools like SimVision., 7. Experience with power management IC (PMIC) design., 8. Proficiency in using Virtuoso for custom layout in a Linux environment., 9. Excellent problem-solving skills and attention to detail., 10. Strong communication and teamwork skills., 11. Ability to work independently and manage multiple tasks simultaneously., 12. Proactive attitude and a passion for continuous learning and improvement. If you are a driven, passionate, and experienced RTL Design Engineer, we would love to hear from you. Apply today and take the next step in your career with us! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Amazon Web Services (AWS) is seeking a Principal Level Commissioning Engineer to support the development and implementation of all aspects of the Commissioning Program for leased/owned data centers. This role, with an expert-level focus on the mechanical discipline of Commissioning, will serve as the primary liaison between Senior Engineers, Principal Engineers, Senior Managers, Directors, and VPs across the AWS team and external Commissioning Vendors. As a leader in the Data Center Capacity Delivery (DCCD) organization, you will research, develop, and ensure meticulous and timely delivery of our Data Centers. Principal Commissioning Engineers are hands-on, producing both detailed technical work and high-level program designs and process frameworks. They will aid in establishing testing methodologies, drive standardization, and increase quality across all AWS building sites. The successful candidate will have extensive experience in commissioning, program development and sustainment, and cross-functional collaboration. They must have a proven record of leading commissioning programs on large-scale critical infrastructure deployments, including Quality Control (QC), Startup, Functional Performance Testing (FPT), Integrated System Testing (IST), and cost- and schedule-mitigating measures. This position requires excellence in a fast-paced environment and the ability to manage concurrent responsibilities while supporting parallel initiatives. AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Key job responsibilities • Serve as the Subject Matter Expert (SME) for mechanical systems and the commissioning program for AWS leased/owned data centers, • Lead and support AWS pre-construction and construction management teams for new data center design and process improvement, • Lead and support AWS product teams and Principal Engineering for new data center design, new products, and product enhancements, • Lead and support reviews of design specifications, testing requirements, and test procedures and standards for adherence to commissioning specifications, • Lead and support workshops that drive alignment on key issues, construction practices, data center designs, and initiatives with the focus of increasing the effectiveness of construction and commissioning while enhancing customer experience and operational excellence, • Assist in Development and delivery of technical training programs for commissioning teams, to ensure consistency in procedures and knowledge transfer, • Conduct regular quality assurance audits of commissioning processes, documentation, and field execution to maintain high standards and identify areas for improvement, • Lead Correction of Errors (COE) investigations, root cause analysis (RCA), and implementation of preventive measures to enhance system reliability and operational efficiency, • Participate in technical interviews for commissioning team members and contractors, ensuring the selection of qualified personnel aligned with AWS standards Additional Job Requirements · Ability and willingness to travel domestic and internationally for up to 50% of the year. · Required to provide personal transportation for meetings and job visits away from the office; reimbursed. About the team Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and conferences, inspire us to never stop embracing our uniqueness. We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. #DCCD_AMER • Bachelor’s degree in Electrical/Mechanical Engineering or equivalent, or relevant discipline work experience, • 7+ years’ experience directly related to the commissioning/startup of data centers/critical infrastructure or large-scale, utility systems, mechanical and electrical plant and experience with large infrastructure project execution., • Strong understanding of construction processes, mechanical and electrical systems, and commissioning methodologies., • Knowledge of industry standards/best practices related to Commissioning., • Strategic thinking and long-term vision for technical direction, • Ability to influence and lead without direct authority, • Works independently while earning trust, building strong rapport across a broader team, • Project and program management skills, • Clear and concise in verbal and written communications, • Cross-functional collaboration and stakeholder management, • Mentorship and development of junior engineers, • Business acumen and understanding of organizational goals Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $212,800/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Job Description Opto-Alignment Technology, Inc. (OATI), a world leader in the development and sales of precision optical alignment and metrology systems, is seeking a talented, enthusiastic and hands-on Associate Production Engineer to join our growing business in CHarlotte, NC. Opto-Alignment is highly recognized as a quality developer and supplier of state-of-the-art laser-based systems for precision optics alignment, assembly, and inspection. The successful candidate will work within the Production team to build, align, qualify our subsystems and full products. The candidate is expected to be hands on, organized, detail oriented, have a high sense of quality, and be capable of multi-tasking. Alignment with our core values of Integrity, Engagement, Customer Focus, Continuous Improvement, and Respect is crucial for success in this role. Job responsibilities: * Work with the production team on assembly and testing of all products, with heavy emphasis on electronic and mechanical components. * Carefully follow work instructions and help maintain and create documentation, including but not limited to, wiring schematics and diagrams, work procedures and quality control. * CAD (SolidWorks) support for production activities, such as BOM creation and drawing updates * Support the R&D team with new product development. * Help with packing, crating, and shipping products. Carpentry experience a plus. Requirements: * Associates (2-5 years of experience) or BS in Mechanical Engineering (0-3 years of experience) or equivalent in a related discipline. * Experience in System assembly/Production roles. Background in optics and optical assembly preferred. * Must have hands-on experience with Electrical and Systems manufacturing tools (soldering, voltmeters, crimper, etc. ). * SolidWorks CAD experience, including drawing creation and assembly modeling. * Strong communication, interpersonal and organizational skills. * US citizenship or Permanent Residency is required for compliance with ITAR regulations. * Ability to occasionally travel domestically and internationally (less than 15%) Note that this job is on-site in Charlotte, NC. Company DescriptionOpto Alignment, located in Charlotte NC, is a leading manufacturer of ultra precision alignment, assembly and inspection optical systems. Our flagship product, the Laser Alignment & Assembly Station (LAS), employs latest generation illumination and vision technologies, along with computer automation, to achieve sub-micron centering precision. For more than 30 years, Opto Alignment is a recognized leader in the field of optical instrumentation where we offer complete solutions for opto-mechanical design, ultra precision machining, system manufacturing and assembly services ranging from the visible to the infrared spectrum.Opto Alignment, located in Charlotte NC, is a leading manufacturer of ultra precision alignment, assembly and inspection optical systems. Our flagship product, the Laser Alignment & Assembly Station (LAS), employs latest generation illumination and vision technologies, along with computer automation, to achieve sub-micron centering precision. For more than 30 years, Opto Alignment is a recognized leader in the field of optical instrumentation where we offer complete solutions for opto-mechanical design, ultra precision machining, system manufacturing and assembly services ranging from the visible to the infrared spectrum.

Job DescriptionABM, a leading provider of integrated facility solutions, is looking for a Building Engineer. The Building Engineer supports the designated leadership with the daily operations of all building systems. This includes hard surface maintenance and repair, basic carpentry and metal work, operating, maintaining and repairing all facility system equipment associated with HVAC operations and mechanical and electrical systems. The Building Engineer will also respond to customer requests and submit and close work orders as necessary and perform other duties as assigned. The Company may require that the successful candidate hired for this position be fully-vaccinated for COVID-19, if and to the extent permitted by applicable law. The Company will make exceptions for medical, sincerely held religious belief, or other legally required exceptions. We are looking for a dynamic individual to join our team. This individual will support a building or a facility by doing things like changing light bulbs, cleaning spills, emptying trash and light mechanical maintenance. They will also do regular housekeeping to keep areas clean and safe. The Utility Technician will report safety hazards and larger maintenance problems to the customer. The Utility Technician must be flexible and willing to complete all tasks that are assigned. Ideal candidates will possess a positive, can-do attitude and understand the importance of building strong client partnerships through excellent communication. We are looking for someone who adapts quickly to change and is able to provide win-win solutions for both the client and ABM. Essential Functions Repair and maintenance of restroom and breakroom plumbing fixtures. Clearing drains by means of plunger and hand-held auger. General labor, such as carrying, stacking, organizing materials used in and around the job site. Debris and trash removal not part of janitorial contract or scope of work. Repairs and cleaning of HVAC registers, radiators return grills. Minor repairs of furniture. Maintaining and/or replacing door hardware. Repair / replacement of venetian blinds. Maintenance painting in mechanical and electrical rooms. Touch up painting in building common areas. Touch up painting in tenant spaces when authorized by property management. General cleaning in mechanical spaces. General cleaning of exterior entry spaces using vacuum, mop, broom, steam cleaner / high pressure sprayer, and other types of cleaning devices or equipment. Cleaning and painting of non-operating mechanical equipment which has been shut down, locked out and tagged by a Journeyman Engineer in accordance with ABM Lockout / Tagout Program. Miscellaneous handyman work requiring the limited use of hand tools. Cleaning roof drains, air vents, registers and radiators. Replacing lamps and cleaning light fixtures. Ballast replacement per ABM Lockout / Tagout polices. Replacing ceiling tiles. Floor tile replacement. Replacing air filters. Cleaning of engineering shop areas. Replacing fire extinguishers. Hanging framed objects not requiring the use of power tools other than cordless drill Complies with client and internal ABM processes and policies Perform other duties as assigned *Job duties may be modified at any time Minimum Requirements Experience in an office facilities environment is desired Excellent organizational skills and attention to detail Ability to adjust work schedule as needed to support the operation Proficient in Microsoft Office Must have working knowledge of OSHA safety standards and regulations Must maintain a valid State issued driver’s license Previous custodial experience desired Able to stand up to 10 hours per day Please note this job description is not designed to cover or contain a comprehensive listing of duties that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. ABM offers a comprehensive benefits package including health insurance (medical, dental and vision), 401(k) plan with immediate vesting, short and long-term disability, PTO, paid holidays and more. ABM values the rich diversity of its workforce. We strive to foster a work environment of respect and engagement that harnesses our workforce’s diversity to our common goal of providing prompt and superior client service. ABM participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Este empleador participa en E-Verify y proporcionará al gobierno federal la información de su Formulario I-9 para confirmar que usted está autorizado para trabajar en los Estados Unidos. ABM is an EOE (Minority / Female / Veteran / Disability / Gender Identity / Sexual Orientation) and is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. -ABM does not sell or share your personal information.•We collect basic personal details like your name and address, work history, and other employment related personal information. We also collect Sensitive Personal Information like race/ethnicity because we are required to do so by law.•We collect this information in order to process your employment with us.•We will keep your information for as long as is required by law. Prior to the submission of your personal information, please review our Employee Privacy Notice. If you are from California, please review our California Employee Privacy Notice. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Our full-time employees enjoy: • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions: • Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting., • Relies on instructions and pre-established guidelines to perform the functions of the job., • Relies on limited experience and judgment to plan and accomplish goals., • A certain degree of creativity and latitude is required., • Assists in problem resolution in an effort to minimize equipment downtime., • Looks for opportunities to continually improve maintenance processes, • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Demonstrate adequate mechanical aptitude., • Proficient in the proper use of power and hand tools., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills., • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Worker must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description What Makes a McKibbon Hotel General Maintenance Technician? As a member of the property maintenance team, the Hotel General Maintenance Technician is accountable for the proper workings of the hotel. From overseeing plumbing and electrics, to HVAC and pool maintenance, you assist and supervise general facilities upkeep. The Hotel Maintenance Technician reports to the General Manager and Chief Engineer and is responsible for maintaining the highest level of quality work to ensure minimal disruption to guests. You have experience in construction trades such as plumbing, electrical, carpentry, basic heating and air conditioning, swimming pool maintenance, painting, caulking, and any similar skills. Your job is to help keep your team and guests happy while embracing McKibbon's Guiding Principles. A Day in the Life: • Work independently and monitor the operations and functions of the interior and exterior areas of the property., • Follow the guidelines established by McKibbon Hospitality in a manner that offers continued protection of the company’s assets, associates, and guests., • Promote enhanced guest satisfaction., • Perform various engineering skills and construction trades., • Train others in engineering skills and construction trades when needed., • Interact with employees and guests, and you will display sufficient communication skills when communicating in any form., • Help promote a collaborative, proactive, and interactive environment with other associates of the hotel., • Embrace the McKibbon Guiding Principles: Think Bigger, Love Your Community, Do the Right Thing, Support Each Other, Make a Lasting Impression. Requirements: • 3 years’ minimum experience in a maintenance-type position, • The ability to communicate operational activities, priorities, and problems with management engineers and supervisors, • Knowledge of common causes of equipment malfunction, • Ability to repair and replace basic heating and air conditioner systems, • Skills necessary to perform basic painting and caulking skills, • Ability to use standard hand tools (wrenches, pliers, screwdrivers, hammers, electricity measurements, etc.), • Knowledge of preventative maintenance methods and techniques for maintaining equipment, • Able to perform tests to check for normal operation of the hotel’s equipment, • Knowledge of how to test pool and spa chemicals, • Knowledge of how to handle fire equipment (hand-held extinguishers, fire hoses, etc.), • Experienced expertise in the construction trades (highly desired), • Previous hotel experience (highly desired), • Ability to perform various maintenance tasks, which may include climbing stairs, walking 10,000 steps or more each day, utilizing power hand tools, and lifting up to 50 pounds., • Must be able to kneel, stand, and work in varying indoor/outdoor conditions, and access high or confined spaces as needed. Ideal Skills & Qualities: • Ability to determine what action should be taken in response to a customer complaint, comment, or inquiry, • Problem-solving skills, • Ability to use various tangible and verbal techniques to solve problems with equipment or dispel disagreements between associates, • Knowledge and ability to identify the appropriate tools, parts, and equipment for use in performing a maintenance task Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Full Time Associates: • Comprehensive benefits package including medical, dental, and vision, • Life insurance, • Pet Insurance, • Short and long-term disability, • Paid time off and holidays, • Tuition assistance Financial & Occupational Wellness: All Associates • Competitive Compensation with incentives (incentives vary by position), • 401K Savings Plan with 50% matching funds, • Associate referral program, • Brand and company training classes, workshops and conferences for career growth and development (varies by position), • Wellbeats APP to support physical and mental wellness Personal Wellness: All Associates • Fundraising matching funds program, • Team volunteer opportunities, • 24/7 chaplain services, • Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply

Job Description As a member of the property maintenance team, the Hotel General Maintenance Technician is responsible for ensuring the proper operation of the hotel. From plumbing and electrical systems to HVAC and pool maintenance, you assist with general facility upkeep. Reporting to the General Manager and Chief Engineer, you are expected to deliver high-quality work that minimizes disruption to guests. You bring experience in construction trades, including plumbing, electrical, carpentry, basic heating and air conditioning, swimming pool maintenance, painting, caulking, and related skills. Your role is to maintain a safe, well-kept property for both your team and guests while upholding McKibbon's Guiding Principles. A Day in the Life: • Work independently and monitor the operations and functions of the interior and exterior areas of the property., • Follow McKibbon Hospitality’s established guidelines to ensure the ongoing protection of company assets, associates, and guests., • Promote enhanced guest satisfaction by offering professional and friendly interactions., • Perform a variety of engineering and construction trade skills related to preventive maintenance and repairs in a timely and efficient manner., • Interact with employees and guests and utilize proficient communication skills when communicating in any form., • Help promote a collaborative, proactive, and interactive environment with other associates of the hotel., • Follow all safety protocols when using tools and equipment, and ensure they are stored in their designated areas in an organized and tidy manner., • Embrace the McKibbon Guiding Principles: Think Bigger, Love Your Community, Do the Right Thing, Support Each Other, Make a Lasting Impression. Requirements: • 3 years’ minimum experience in a maintenance-type position, • The ability to communicate operational activities, priorities, and problems with management engineers and supervisors., • Knowledge of common causes of equipment malfunction., • Ability to repair and replace basic heating and air conditioner systems., • Skills necessary to perform basic painting and caulking skills., • Ability to use standard hand tools (wrenches, pliers, screwdrivers, hammers, electricity measurements, etc.)., • Knowledge of preventative maintenance methods and techniques for maintaining equipment., • Able to perform tests to check for normal operation of the hotel’s equipment., • Knowledge of how to test pool and spa chemicals., • Knowledge of how to handle fire equipment (hand-held extinguishers, fire hoses, etc.)., • Experienced expertise in the construction trades (highly desired)., • Previous hotel experience (highly desired)., • Ability to perform various maintenance tasks, which may include climbing stairs, walking 10,000 steps or more each day, utilizing power hand tools, and lifting up to 50 pounds., • Must be able to kneel, stand, and work in varying indoor/outdoor conditions, and access high or confined spaces as needed. Ideal Skills & Qualities: • Ability to identify potential maintenance concerns and take appropriate action with minimal supervision., • Problem-solving skills., • Able to determine what action should be taken in response to a customer complaint, comment, or inquiry., • Knowledge and ability to identify the appropriate tools, parts, and equipment for use in performing a maintenance task. Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Full Time Associates: • Comprehensive benefits package including medical, dental, and vision, • Life insurance, • Pet Insurance, • Short and long-term disability, • Paid time off and holidays, • Tuition assistance Financial & Occupational Wellness: All Associates • Competitive Compensation with incentives (incentives vary by position), • 401K Savings Plan with 50% matching funds, • Associate referral program, • Brand and company training classes, workshops and conferences for career growth and development (varies by position), • Wellbeats APP to support physical and mental wellness Personal Wellness: All Associates • Fundraising matching funds program, • Team volunteer opportunities, • 24/7 chaplain services, • Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply

Job Description The Lead Operating Engineer is responsible for the HVAC system and all mechanical equipment within the building. The position works very closely with the Chief Engineer to ensure that the building systems are functioning properly. Primary Functions: • Monitor the operating condition and control parameters of all HVAC and mechanical equipment., • Promote and maintain energy efficiency for building operations to include but not limited to electrical, water and gas consumption., • Supervise and monitor the chiller maintenance contractor, the emergency generator contractor and the water treatment contractor., • Participate in and supervise routine repair and emergency maintenance operations of HVAC and mechanical systems., • Perform unscheduled maintenance calls, including routine plumbing emergencies, minor equipment malfunctions, hot/cold calls, electrical and lighting repairs, and minor structural repairs (ceiling, ceramic / vinyl tile, floor, door, etc.), • Monitor all building equipment to ensure a comfortable building climate., • Perform and coordinate preventive maintenance and maintain records on all building equipment., • Responsible for changing ceiling tiles, light bulbs, filters, ballasts, etc., • Proactively conduct tours to look for deficiencies and coordinate/initiate repairs. (Such as stained ceiling tiles, slamming doors, broken restroom equipment, etc.), • Respond to emergency calls after hours on a rotating basis., • Promote and maintain a safe work environment., • Experience, • Must have five years' experience in HVAC maintenance with an emphasis on preventive maintenance, centrifugal chiller operations, energy management, generator operation and troubleshooting techniques., • Education & Training, • High school education or equivalent, • Universal Refrigeration Certification, • Formal Technical Training in HVAC desired, • Competencies, • Strong electrical, plumbing and HVAC skills., • Ability to read electrical and mechanical schematics., • Experience in compressor change out., • Good verbal and written communication skills., • Ability to prioritize work and to be a self-starter as well as a motivated team player., • Valid driver's license and satisfactory driving record., • Good trouble shooting skills., • Ability to lift 50 to 100 pounds., • Ability to climb ladders., • Ability to pass a drug screen and a criminal background check. #IND123 About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

Job DescriptionSalary: We are seeking an Electrical Cx Technician for our Atlanta, GA project site for 2-3 month support. This is an entry-level position; seeking applicants with a great attitude and a willingness to learn. As Electrical Commissioning Technician, you'll be responsible for commissioning electrical systems and devices for a facility. They work under the direction of supervisors, discipline leads, and senior technicians to meet project deadlines and safety targets. Responsibilities include, but not limited to: • Knowledge to assist with verification of industrial power & process plant electrical distribution and control equipment. For example: Switchyards, Switchgear and motor control centers, Various motors, Protective relaying and control circuits, Power & Distribution transformers, Variable frequency drives, Generators, • Knowledge to verify installation, testing, commissioning of electrical devices., • Perform daily tasks within area of expertise utilizing safe, reliable instruction to provide required results., • Ability to work to a project schedule and complete assigned daily work to achieve commissioning goals., • Responsible for evaluation of all drawings and documents, including vendor documents, to assist all required assigned tasks and provide corrections as necessary to ensure all documents are updated for completeness, detail and accuracy. Coordinates with project supervision or field engineer to complete as-built drawings and documents., • Assist with electrical checks/testing or document per industry standards and project specific requirements. ., • Responsible to follow or create procedures for assigned work tasks in a safe manner utilizing required safety procedures such as LOTO, Arc Flash, Arc Blast, Shock Hazard., • Requires the ability to assist and work with vendors to commission the vendors equipment as needed., • Requires the ability to work with owners operation and maintenance personnel periodically without any conflicts., • Other duties as assigned. Job Requirements: • Associates degree in an electrical technology related curriculum or equivalent job related experience, • 1+ years of work commissioning experience, in addition to education requirements, in operational and maintenance of electrical equipment and controls discipline., • May be required to supervise other technicians, subcontractors, or client personnel.

Job Description We are a relationship-based, forward-thinking, and fully integrated Architecture and Engineering firm seeking a dynamic, passionate, and self-driven individual to lead and grow the engineering staff. This position will be a great fit for you if you are looking for a company that creates lasting partnerships with its clients, views engineering as a valuable dimension to our business when fully integrated, and provides a positive, respectful, and supportive environment for its employees. The Director of Engineering mentors, manages, coaches, and leads the entire engineering team. This includes structural, HVAC, plumbing, and electrical engineering. This role facilitates individual and collective professional growth, delivers technical excellence, and positions engineering as one of three fully integrated and powerful pieces of the company – architecture, engineering, interior design. The Director of Engineering will also oversee engagement initiatives to ensure a cohesive and motivated team. Leadership + Mentorship We are looking for an individual who will lead and foster the engineering team's growth and has a passion for leading people, elevating the client experience, and leveraging the fully integrated model across our five office locations. We seek an individual with a forward-looking view of the markets we serve, seeking opportunities and market influences that will impact clients and design strategies for our clients. Collaboration + Knowledge Sharing We value learning and knowledge sharing and believe this is ongoing in all roles and levels throughout our firm. We seek an individual who is passionate about sharing knowledge and elevating those around them through mentoring and leadership. The individual will have knowledge and expertise in design, engineering and the overall design and project delivery process. You will teach and mentor team members across five office locations to build skills, prepare them to synthesize information, and develop presentations to illustrate and communicate project goals and strategies. You will partner with studio leaders (8) and project developers across the firm to share best practices, maintain continuity in delivery, and leverage the expertise that engineering offers. Key Accountabilities: Vision and Leadership: Establish an engineering vision that aligns with the company's overall vision. Lead and direct the engineering team in managing and collaboratively delivering projects to fully leverage our integrated model and meet our quality standards and project deadlines. Coordinate resource planning, staff deployment, and project execution. Mentorship and Coaching: Provide continuous mentorship and coaching to team members across our five office locations to foster their professional growth and development. Occasional travel to our office locations is expected. Conduct regular one-on-one meetings to discuss career aspirations, provide feedback, and set development goals. Encourage a culture of continuous learning and improvement by promoting training opportunities, workshops, and certifications. Business Development Develop, nurture and maintain client relationships. Assist and actively participate in the development of new business and relationships. This will include working with our national and regional market leaders and studio directors in the pursuit of new projects, interviews, and authoring proposals. Direct selling of engineering services to our current and potential clients is encouraged and done within the context of our entire suite of services. Performance Management: Establish clear performance expectations and goals for each team member. Conduct regular performance reviews to assess progress, provide constructive feedback, and recognize achievements. Develop and implement performance improvement plans for team members who need additional support. Team Building and Skill Development: Identify skill gaps within the team and create development plans to address them. Facilitate cross-training opportunities to ensure team members are well-rounded and versatile. Encourage team members to take on challenging projects and roles to expand their skill sets. Identify staffing needs and assist in recruiting, interviewing, hiring, and onboarding new employees. Review and recommend annual salary increases and bonuses. Foster a collaborative and inclusive team environment where all members feel valued and supported. Promote open communication and transparency within the team to build trust and mutual respect. Minimum Requirements: • Education: Bachelor's degree in engineering and professional engineer certification., • Experience:, • 15 years of experience in facility engineering, design and/or project management., • Ability to obtain licensure/registration in multiple states., • Minimum of 10 years of experience managing direct reports, • Skills:, • Exceptional interpersonal skills, including strong written and verbal communication., • Ability to function effectively in a demanding environment and manage multiple projects simultaneously., • Strong team collaboration skills, sound decision-making, and cross-functional, action oriented.

Job Description Candidate should have previous Forensic experience. You must possess a valid Professional Engineering license (PE) to be considered Unqualified candidates will not receive a response. As an Electrical Engineer, you will conduct and manage investigations involving residential, commercial and industrial electrical systems; examine and assess electrical equipment and components; and conduct fire origin and cause investigations. You will interact with clients and other consultants, manage multiple, unique projects, and prepare written reports summarizing your analyses. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With locations nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage to commercial and industrial facilities and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. Technical Qualifications: • Bachelor of Science degree in Electrical Engineering (not electronics), • Licensed Professional Engineer (P.E.), • Forensic Experience, • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, Microsoft Office) Experience in One or More of the Following Areas: • Process Plants, • High Voltage Power Generation and Distribution, • Instrumentation and Controls Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, orally and in writing, • Think and work analytically, • Coordinate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Professionalism, • Honesty, • Competitive and Unique Salary Plan, • Health Insurance, • Dental Insurance, • 401(k) with company match Our unique salary plan allows for financial growth unmatched in the industry. EOE View our site online at Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies.

Job DescriptionDescription: Sheraton Galleria, Atlanta is a beautifully renovated hotel, ideally located just minutes from Truist Park, home of the Atlanta Braves. With 278 rooms and 5,000 sq. ft. of meeting and conference space, our hotel provides a dynamic and welcoming atmosphere for both business and leisure travelers. Boasting modern amenities, stylish design, and an unbeatable location near one of the city’s most exciting sports and entertainment hubs, we offer a unique experience for our guests. Are you passionate about hospitality and ensuring a top-tier guest experience? We’re looking for an Engineer to join our team in a newly renovated, vibrant environment! As a key member of our maintenance team, you’ll play a vital role in keeping our property in excellent condition and ensuring a safe, comfortable stay for our guests. • Perform routine maintenance and repairs on hotel equipment, systems, and facilities., • Troubleshoot and resolve issues related to plumbing, electrical, HVAC, and mechanical systems., • Conduct regular inspections to identify potential maintenance needs and prevent disruptions., • Work closely with other departments to address maintenance requests efficiently., • Ensure compliance with safety standards and hotel policies., • Maintain a clean and organized work area while handling tools and materials responsibly. Why Work with Us? Sheraton Galleria has recently completed a stunning renovation, bringing new life and modern sophistication to our hotel. As part of our team, you’ll enjoy: • Competitive hourly wage plus tips, • A dynamic work environment in a newly refreshed space, • Opportunities for career growth and development within StepStone Hospitality, Inc., • A chance to engage with guests from around the world in one of Atlanta's most sought-after locations, • Free Parking, • Free Breakfast Requirements • HVAC, plumbing, electrical, drywall and some carpentry experience preferred, • Strong communication and interpersonal skills, • Ability to handle difficult situations and maintain professionalism, • High school education preferred; relevant training and experience required, • Previous experience in a hotel environment preferred, • Knowledge of applicable Federal, state, and local health, safety, and legal regulations, • Ability to obtain required licenses and certificates, • Additional language ability preferred

Job Description The Electrical Engineer is responsible for electrical planning, designing, engineering and construction document production and project estimates. Additional duties include energy analysis, lighting analysis, cost/benefit analysis, electrical systems design, existing system condition assessment, and emergency/standby generation design. This position reports to the Director of Engineering. The Fundamentals • Apply knowledge and experience with building codes, regulations and requirements, building materials, construction methods, and procedures to all projects. Ability to manage the proper sequencing of construction documents., • Manage multiple, simultaneous projects from beginning to end, such as Design Basis through specifications and submittals., • Able to work well in a team/collaborative setting, make sound decisions and drive action cross functionally., • Able to organize and prioritize personal workload in a dynamic, fast-paced environment to meet deadlines., • Comfortable making independent decisions with general guidelines., • Demonstrated exceptional planning, analytical and problem-solving skills; ability to apply logical steps to problem solving., • Able to work with modest supervision and guidance, • Possess a professional demeanor while interacting with clients, partners and team members., • Able to function effectively in a demanding environment and manage multiple projects simultaneously., • Demonstrated strong verbal and written communication skills; skilled with making presentations to clients., • Possess a professional demeanor while interacting with clients, partners and team members, • Experience in higher education, office and/or light manufacturing, • Bachelors degree in Electrical Engineering from an accredited institution, • Minimum five years of experience in facility design, • Experience in power distribution, lighting design, communication systems and data centers, lighting photometric calculations, existing building assessments/reports., • Professional license is preferred, • Must be proficient in Revit, Microsoft Office (Word, Excel, Access, Outlook), AutoCAD and specialized electrical engineering software (e.g. Easy Power), • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions., • Occasional travel may be required, • Able to move around construction sites in various stages of development from excavation to completion and beyond., • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions., • Occasional travel may be required, • Activities may be necessary outside of the normal office hours depending on workload, schedules and client geographical location. Annual base compensation for this position is $90,000 - $110,000 based on experience

Job Description About Us Steele Solutions, Inc. is the nation's leading designer and manufacturer of steel work platforms and mezzanines. We recently launched our automation division to solve one of the biggest challenges in material handling-controls that are too often rebuilt from scratch, full of delays, and unpredictable at startup. With this launch, we’re looking for a Controls Engineer professional to join our automation team in Atlanta, GA (preferred) or Milwaukee, WI! Summary Under limited supervision, the Controls Engineer III is responsible for the design, programming, and deployment of complex control systems for material handling automation. This role includes ownership of full project scopes, from design through commissioning, as well as contributions to standardization efforts, troubleshooting escalation, and cross-functional coordination. Controls Engineer IIIs serve as technical leads on mid-sized projects. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. System Architecture & Standardization • Design and develop PLC and HMI architectures for moderately complex systems., • Contribute to the enhancement of reusable code libraries and configuration templates., • Support the refinement and enforcement of internal engineering standards. Technical Leadership & Execution • Program and commission control systems including transport conveyors, merges, and moderate sortation logic., • Lead FAT/SAT procedures and manage site commissioning activities., • Resolve advanced troubleshooting issues both remotely and on-site., • Ensure proper documentation and version control for all deliverables. Team Development & Mentorship • Mentor junior engineers and participate in structured peer review processes., • Lead onboarding efforts for new engineers by sharing tools, techniques, and templates., • Develop internal training documentation and presentations. Cross-Functional Collaboration • Act as a technical point of contact for cross-disciplinary engineering coordination., • Partner with Project Management to provide technical scope, scheduling input, and commissioning strategy., • Provide oversight and direction to subcontractors and integration partners. Strategic Growth & Innovation • Identify improvement opportunities in commissioning efficiency, code reusability, and HMI user experience., • Lead pilot implementation of new tools, platforms, or features under supervision., • Contribute to internal R&D or innovation projects and share results with the team. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • Bachelor's degree in Electrical Engineering, Mechatronics, or related field., • 5–7 years of experience in industrial controls engineering, including lead project responsibilities. Other Key Skills • Advanced proficiency in RSLogix 5000/Studio 5000, TIA Portal, and HMI platforms (Ignition, FactoryTalk View)., • Proven ability to optimize PLC logic for performance and maintainability., • Experience with industrial networks (Ethernet/IP, Profinet), VFDs, servo drives, and safety systems., • Ability to manage multiple projects and guide junior engineers., • Willingness to travel (up to 25%) to support installations and startups., • Excellent communication, technical documentation, and team collaboration skills. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions The position works in an office environment – location Atlanta, GA (preferred)/Milwaukee WI. Why You’ll Love Working Here • A collaborative culture., • Opportunities to make a real impact as we grow., • Competitive pay, great benefits, and a great team., • Celebrations, volunteer days, and moments that make work more than just “work.” Are You Ready to Join the SSi Team?

Job DescriptionThe Automation & Controls Engineer is responsible for developing and implementing automated engineering solutions for plant operations, quality, processing, and logistics teams, managing medium to high complexity projects, ensuring safe operations for employees and contractors.This position is the plant subject matter expert for robotics, automation, sensors, PLC’s, HMI’s, data communication solutions (Ethernet & wireless), vision and inspection programs. Is responsible for the basic design, integration, and implementation of intermediate to complex engineering solutions; understands and executes the capital appropriation request process and oversees projects. Possess the skills knowledge and abilities to program PLC’s (Mainly Allen-Bradley, Rockwell), is a competent Industrial Electrician with 3-phase, 480V, and or industrial troubleshooting experience to assemble, install, test, and maintain electrical or electronic wiring, equipment, apparatus, and fixtures, using hand, power, and precision measuring tools.The Automation & Controls Engineer diagnoses malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.The Automation & Controls Engineer is responsible for the connection of wires to circuit breakers, transformers, or other components. Responsible for observing and following all safety regulations with required PPE. DUTIES / RESPONSIBILITIESØ Areas of responsibility include the design or development of new process control systems or revision of existing processes; developing and coordinating implementation of World Class Manufacturing (WCM) projects which contribute to plant profitability; assist with preparing programs for computer control systems; and prepare and coordinate operational information and data for the plant management.Ø Internal contacts include heads of production, maintenance, and quality, etc. and securing appropriate resources to plan and implement controls projects. Ø External contacts include consultants and suppliers to determine the compatibility of other systems, products, and personnel as they may apply to WCM and Controls.Ø Maintains records of plant and individual equipment performance. Ø Prepares data sheets, diagrams and flow charts needed for the correct and efficient operation of the plant equipment.Ø Develops and maintains standard operating procedures and work instructions. Ø Uses advanced PLC / Controls tools to reduce process variations. QUALIFICATIONS / REQUIREMENTSv Proven PLC programming (Allen Bradley, Rockwell Automation).v Five (5) years of progressively responsible electrical/automation experience.ORv Completion of a four-year federally approved technical training program in electrical repair and maintenance and two (2) years electrical experience.ORv Any equivalent combination of experience and/or education from which comparable knowledge, skills and abilities have been achieved. E04JI800n8pv404efum

Job Description Are you passionate about pioneering innovations in the semiconductor industry? At Falcomm, we are on a mission to transform semiconductor technologies into tangible, real-world solutions. We specialize in crafting energy-efficient RF products that set the standard for excellence in performance. As an RFIC Test Engineer, you will perform tests on Power Amplifiers, LNAs, and other circuits on-chip. Additional responsibilities will include developing test methodologies, documenting test and calibration procedures, and automating test processes. Your role will be instrumental in characterizing and validating products that not only meet but exceed our customers' expectations. We need a BSEE or MSEE with at least two years of experience in RF/mmWave Test and Characterization of compound semiconductors and/or silicon integrated circuits up to 100GHz in frequency range. We are looking for an individual who thrives in a fast-paced environment, is eager to contribute to cutting-edge projects, and is motivated by the challenge of creating real-world applications of semiconductor innovation. RESPONSIBILITIES: • Perform on-chip electrical testing of power amplifiers, LNAs, and other RFICs, • Set up the RF test bench for measurements and conduct manual on-wafer/on-die probing, • RFIC device characterization and performance measurements, • Design RF PCBs for RFIC products and internal use, • Analyze test data and prepare characterization reports, • Automate RFIC testing through scripting, • BS or MS in electrical engineering or related technical field, • 2+ years of hands-on experience in RF and mmWave testing and characterization of compound semiconductor and/or silicon-based integrated circuits., • Skilled in manual on-die probing and test setup configuration, including calibration, measurement automation, and data analysis., • Hands-on experience with operation and/or programming of on-wafer test equipment such as network analyzers, signal generators, power supplies, power meters, and spectrum analyzers., • Understanding of RF theory and standard test practices., • Must be willing to work on-site full-time at our office in Atlanta, GA Preferred skills: • Experience performing HTOL and temperature testing, • Experience with built-in self-test methods, • Experience scripting in python and/or MATLab for measurement automation, • Experience with power amplifier and LNA measurement and characterization, • Stock option plan, • Medical, dental, and vision, • Paid time off, • Family leave DISCLOSURE: • Falcomm is an Equal Opportunity Employer; employment with Falcomm is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status., • Applicants wishing to view a copy of Falcomm’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify Falcomm., • To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

We are seeking a skilled Structural Engineer to join our team serving as the building department for the State of Georgia. In this role, you will be responsible for reviewing structural plans and specifications, ensuring compliance with state codes and standards, and providing detailed written feedback on commercial building projects. This position is ideal for an engineer who enjoys working in a stable, team-oriented environment with excellent benefits and work-life balance. Responsibilities • Review structural plans and specifications for compliance with applicable building codes and standards., • Provide written comments and recommendations on projects under review., • Collaborate with architects, civil engineers, electrical engineers, fire inspectors, and other professionals., • Communicate effectively with diverse stakeholders, adapting to different personalities and managing discussions constructively., • 5+ years of experience as a Structural Engineer., • Proven experience with commercial building structures (steel frame, concrete frame, pre-engineered buildings, etc.)., • Strong written and verbal communication skills., • Proficiency in Microsoft Excel., • Ability to work effectively with a variety of stakeholders and personalities.

Job Description • Please note that this is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties • Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents, • Ability to program projects with various levels of complexity, • Capable of performing network troubleshooting, database troubleshooting and repair programming, • Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations, • Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems, • Maintains accurate and thorough project documentation and redlines, • Provides owner training as required by the project, • Executes system commissioning and functional testing, • Assist in installation of control hardware, • Startup and commission new hardware installations, • Provide project management assistance on projects as required, interfacing directly to customers, • Supervise sub-contractors and suppliers as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job DescriptionSalary: Job Description The Commissioning / HVAC Technician will serve as a valuable member of our team, working on multiple concurrent projects performing building commissioning services for both new construction and existing facilities for commercial, institutional, and educational buildings. The Commissioning / HVAC Technician will work closely in a team environment on multiple projects, but must be able to work independently when required and adhere to schedules. Duties and Responsibilities • Ability to independently create or review test procedures based on:, • Contract Documents, specifically drawings and specifications, • Other design documentation such as Owners Project Requirements, • Industry and standards-based best practices, • Assist the Commissioning Engineer in preparing checklists for installation verification and functional performance testing of equipment and integrated systems, • Perform field verification of equipment installation and startup; document commissioning issues, • Supervise or witness equipment startups, as needed, • Oversee functional performance testing of both individual equipment and integrated systems, • Assist in troubleshooting of commissioned equipment and systems when appropriate, • Help maintain the Commissioning Corrective Action and Pending Issues Logs, • 1 year of experience of building commissioning, HVAC, Automatic Temperature Controls, and/or Testing and Balancing, • Strong fundamentals in HVAC, hydronics, automatic temperature controls and renewable energy systems design, installation and operations, • HVAC: Hands-on experience in testing, start-up and troubleshooting of HVAC systems, including but not limited to cooling towers, chillers, packaged roof top units, ERUs, DOAS, AHUs, VRFs, VFDs, for hospitals, schools, commercial and institutional buildings., • Electrical (additional): Hands-on experience with equipment such as emergency generators, ATS, UPS, PDUs and power monitoring systems desired., • Ability to work independently and manage time effectively, • Professional appearance and demeanor, • Ability to support multiple projects simultaneously, • Must be highly motivated, proactive and willing to take on new challenges, • Ability to build and maintain positive work relationships with the project team, vendors, contractors, and owners., • Excellent verbal and written communication skills.

Job Description Embedded Systems Engineer StethX is seeking a motivated engineer to join our vibrant startup team in Atlanta, GA. The Embedded Systems Engineer will interface with a fast-paced R&D team supporting design, development, characterization, validation testing and report writing. As a StethX team member, you will be joining us in an entrepreneurial and collaborative environment to develop the next-generation MEMS (micro-electro-mechanical systems) inertial and acoustic sensors for medical and defense applications. StethX provides competitive benefits and salary with a location in Midtown Atlanta. We are building technology with national impact. This position is for US Citizens Only Position Responsibilities: Design, test and characterization of embedded systems for sensor applications. Perform characterization and design validation by testing MEMS devices, ASICs, including screening, microscope imaging, measurements and creating summary reports. The intended tasks and duties include: • Test and characterization of MEMS and ASIC components, • Embedded system design (microcontrollers, FPGA), • Design and layout of PCB boards, • Develop test and data acquisition methods for product evaluation, • Perform product testing and documentation, • Provide direct oral and written communication updates regarding activities, • Bachelor's degree in Electrical Engineering, • Minimum of 3 years of experience working with bench electronics in a microelectronics test environment, • Experience with manual board rework and soldering techniques required, • PCB layout and design, • Experience with electrical characterization techniques (CV, impedance measurements, etc.) preferred, • Experience with operating oscilloscopes and spectrum analyzers a plus, • Experience in using probe stations and wirebonders preferred, • MEMS and semiconductor device test experience is desirable, • Experience with Microsoft Office (especially PowerPoint and Excel) required

Job DescriptionThe Electrical Engineer ideal candidate has significant experience and background in Electrical Engineering / design capable of executing the core responsibilities listed below. Responsibilities: • Support medium scope projects through the detail design and implementation phase. This includes development of BOM generation, electrical control panel phasing plans, Electrical Engineering work plans, and design approval packages, • Supporting Project Engineer during transition from Detailed Design to Final Engineering, • Reviewing and providing Electrical Engineering input to Description of Operation (DOO) & Functional Specification (FSD) documentation, • Providing Electrical Engineering input for implementation plan, • Developing Electrical Engineering work plan to ensure successful project milestone achievements, • Leading Controls Layout review meetings with internal teams and Client. Supporting Project Engineer to achieve design acceptance, • Electrical device layout package, • Control panel fabrication package, • Electrical installation package, • Attending Client meetings as required, • 4-year engineering degree in Electrical Engineering (or similar engineering program) from an accredited college plus 3-5 years of relevant work experience, • Conveyor control process experience (photoeyes, solenoids, variable frequency drive, line scanner, print and apply application), • Advanced collaboration and communication skills (written and verbal communication), • Experience managing Engineering projects requiring collaboration between multiple Engineering work streams, • UL, NEC, NFPA, OSHA design requirements, • 480VAC motor control panel design experience, • Strong comprehension of Profibus, Profinet, Ethernet IP, network design and requirements

Job DescriptionThe Electrical Engineer will analyze existing electrical systems and making cost-effective improvements, generating electrical BOMs, creating wiring schematics, completing quality assurance, inspecting the equipment, as well as running diagnostics, and ensure projects are completed on time and to specifications. You will be in place to assist and develop equipment through the implementation of emerging technologies and best in class controls design practices for high-speed automated packaging equipment. DUTIES / RESPONSIBILITIESØ Demonstrate strong leadership abilities and organizational skills. Candidates should be passionate about engineering and able to efficiently troubleshoot systems.Ø Developing, reviewing, updating, and modifying PLC, Motion and HMI CodeØ Generating and Maintaining BOMsØ Developing, reviewing, updating, and modifying safety systems to ensure standards are met.Ø Design Electrical schematics and Panel layouts to meet NEC / NFPA 70, UL508 standards.Ø Program using IEC standards LD, IL, SFC, ST.Ø Research new components to keep current with new technologies.Ø Developing, reviewing, updating, modifying, and approving electrical schematics.Ø Liaising with project managers, manufacturing, and other engineers to ensure projects are completed to specifications.Ø Establishing relationships with customer facing organizations, vendors, suppliers, other professionals, and expanding networks.Ø Resolving supply chain issues by finding alternate parts when preferred components aren’t available.Ø Analyzing existing processes and scheduling meetings to discuss improvement initiatives.Ø Conducting research, performing diagnostics, and troubleshooting equipmentØ Drive development projects by directing and influencing cross functional teams.Ø Machine Production and Installation Support:· Support the Technical Sales managers on platform production projects.· Respond to questions, troubleshoot, provide studies and estimates.· Provide cost effective solutions to problems affecting the customer product while maintaining the integrity of the designs.· Support field service in commissioning machines.· Work with customers to integrate the machine into projects.· Give guidance to assembly teams during manufacturing process. REQUIREMENTS / QUALIFICATIONSv BS Degree in Electrical Engineering from an accredited Universityv 2 years of experience in electrical/controls/programming – Required.v Packaging Machinery experience - Preferredv Excellent problem-solving and analytical abilities.v Practical experience with Electrical CAD software.v Strong interpersonal, negotiation, and communication skills.v Excellent motivational skills and multitasking abilities.v Ability to travel both Domestic and Internationalv Provide standard machinery controls design for solving our customer's packaging needs.v Responsible for accuracy of calculations in reference to electrical and pneumatics required for designing automation mechanisms and equipment.v Research purchased electrical components for adequate sizing and selection of various electrical devices.v By using AutoCAD 2D develop working electrical layout drawings, control cabinet drawings, and pneumatic layout drawings for production and customer usage in component identification.v Assist in cost reduction and quality improvement of the electrical designs for our machinery.v Understand customer's electrical specifications and needs for their packaging operations.v Assist technical writer in creation of machine documentation.v Provide programming for standard equipment upgrades, and all custom packaging machinery.v Participate in start-up and commissioning of machinery in plants and occasionally at customer’s facility. E04JI800n8pv406ln5h

Job Description Title: Building Engineer Reports to Chief Engineer Role: The Building Engineer is a person who can achieve and maintain the general appearance of the building. Responsibilities: • Maintain and repair all components of plumbing fixtures, cosmetics of common areas, door hardware, lighting system and electrical outlets., • Maintain a safe path of egress to the buildings during normal and inclement weather., • Assist other engineers in maintaining the shops and equipment rooms on site., • Complete tenant generated work order requests the same day before lunch or leaving the property for the day., • Perform all preventive maintenance work orders within the allocated time frame or issuance., • Maintain work area in a professional looking manner., • Maintain a professional image while on property, even when not on the duty., • Keep company issued hand tools in good working condition. Responsible for replacement of lost or damaged tools if damaged by employee., • Lift heavy objects of 70 pounds, as well work overhead with hand tools, • Wear PPE to fulfil Job Specifications: The Building Engineer must be a self-motivator who requires little supervision to complete tasks. Building Engineer must possess good communication and writing skills to enable employee to successfully complete work orders and communicate with tenants. Building Engineer must be in adequate physical condition to perform safely the responsibilities outlined above. Position requires ability to move, set up and operate a high lift, as well as considerable amount of time spent on ladders, and operating power tools. Building Engineer must be able and willing to aid in the duties and responsibilities of other engineers. Building Engineer must keep Assistant Chief Engineer informed of the status of projects and any problems that may affect the day-to-day operation of the building. Building Engineer to participate and work the On-Call Engineering shift, overtime and weekend projects. Outlined below are the basic skills required for this position: • Electrical, • Knowledgeable basic use of a multi-meter, • Ability to read and understand basic wiring diagrams, • Able to conduct basic troubleshooting of AC and DC circuits, • Plumbing, • Knowledge of basic plumbing components, • Working knowledge of valves; isolation, PRV, relief, flush, temperature pressure (TP) and control, • Working knowledge of electric water heaters, • Working knowledge able to repair faucets and flush valves, • Able to conduct troubleshooting of basic water flow problems, • Carpentry, • Installation or repair of door hardware, • Ability to conduct installation of mortise and cylindrical locksets and cylinders, • Ability to replace and adjust door closures; surface or floor mounted, • Able to perform basic floor and ceiling tile repairs, • Able to produce quality painting as directed, • Basic, • Read, write, basic math and able to read a ruler, • Climb a 12’ A frame ladder and 40’ extension ladder correctly and safely, • Work from an 80’ aerial high lift

Job Description Company Overview Hotel Phoenix at Centennial Yards is an independent boutique hotel committed to delivering authentic hospitality and creating an environment where both guests and associates feel valued and inspired. Rooted in the spirit of Atlanta, we foster a workplace culture built on collaboration, integrity, and growth. Position Purpose We are seeking a dependable and hands-on Engineer I to assist with the maintenance and repair of the hotel’s physical property and systems. This entry-level role is essential to ensuring a safe, comfortable, and well-maintained environment for guests and associates. The ideal candidate is eager to learn, takes pride in their work, and has a strong commitment to quality and service. Key Responsibilities • Perform basic maintenance tasks including painting, plumbing, electrical, HVAC, and carpentry repairs., • Conduct routine inspections of guest rooms, public spaces, and back-of-house areas to identify maintenance needs., • Respond promptly to guest and associate service requests in a professional manner., • Maintain accurate records of maintenance work and preventive maintenance activities., • Ensure tools, supplies, and equipment are used safely and stored properly., • Previous maintenance or engineering experience preferred; hotel or hospitality experience a plus., • Basic knowledge of building systems, mechanical, electrical, and plumbing repairs., • Strong attention to detail and problem-solving abilities., • Excellent teamwork and communication skills., • Ability to work flexible hours, including evenings, weekends, and holidays., • Technical training or certification in general maintenance, HVAC, electrical, or plumbing., • Experience using work order or maintenance management systems.

Job Description Job Description: Join our Hazen team and make the world a better place by providing exceptional client service in all things water® and superior technical solutions for our clients. Hazen is a creative, employee-owned company with minimal bureaucracy where employees thrive. We have an outstanding opportunity for a self-motivated entry-level engineer in our Atlanta, GA office who enjoys teamwork and collaboration, technical challenges, and solving our clients’ most difficult problems. You will be supported by multiple mentors and local office leadership. We have a strong backlog of work and a reputation for excellence - if you're up for the challenge, we would love for you to join our team! Job Responsibilities include, but are not limited to the following: • Working closely with a design team from initial studies and conceptual design through construction., • Working on water and wastewater projects, related to municipal facilities and infrastructure., • Preparing engineering specifications, data sheets, sketches, drawings and performing engineering calculations., • Coordinate with discipline engineers (structural, architectural, HVAC, electrical, instrumentation and controls, and site civil) to collaborate on design and construction activities., • Review contractor shop drawing submittals and RFIs., • Performing field work and site visits from design through construction., • Preparing engineering specifications, data sheets, sketches, drawings and performing engineering calculations. Minimum Qualifications: • B.S. degree in Environmental, Civil, Chemical or related engineering discipline., • EIT or ability to obtain within 6 months., • Entry Level to 2 years of experience, • Excellent writing, communication, and interpersonal skills, • Strong organizational skills, • Proficient in all computer software typically used (e.g., Microsoft Word, Excel, etc.) Preferred Qualifications: • M.S. degree in Environmental, Civil, Chemical or related engineering discipline., • Proficient in CAD/BIM and GIS

Job Description Across the data center industry – from deployment, through operations and maintenance, to decommissioning – Salute is the industry leader of delivering global data center services executed with military precision. At Salute, we don’t have employees. We have team members. It’s our culture, and it’s a significant driver of the success we're able to deliver for our clients. This team-oriented culture is defined by transparent communication, collaborative development and deployment of procedures and best practices, a customer service mindset both internally and externally, and a strong commitment to safety. Field Service Engineer: As a Field Service Engineer, you will be responsible for commissioning UPS, batteries and PDU at a specified customer site following predetermined script. Provide accurate and timely communication to internal and external customers. Keep current on Safety Field Change Notices and Service Tips. Requirements: • 5+ years’ experience in this field and ability to follow MOPS on equipment such as UPS, batteries, PDU’s / Power Distribution Units, Static Automatic Transfer Switches, Branch Circuit Monitoring, and other electrical equipment, • Working knowledge of OHM's law and electronic theory, • 3 phase/480v experience required, • Familiarity with electrical/electronic test equipment and fundamentals., • Ability to read and interpret electrical line diagrams and blueprints., • Ability to evaluate the operating conditions of equipment., • Standard computer skills including MS Outlook, Word, and Excel., • Mechanical aptitude., • Clear, concise, written and verbal communication skills., • Ability to interact comfortably with all levels of internal and external customers., • Ability to lift and carry heavy equipment, up to 40lbs., • Ability to climb ladders and multiple flights of stairs to access elevated equipment, • Ability to stand for long periods of time in various work environments, • Ability to bend, stoop, kneel, and reach for equipment related tasks, • Basic physical fitness to respond quickly to emergency situations and navigate areas quickly, • Ability to move quickly and efficiently withing various work environments to troubleshoot issues or respond to emergencies., • Good hand-eye coordination and dexterity for working with small components and connectors, • Clear vision, with or without correction, to perform tasks requiring attention to detail and precision while wearing safety glasses, • Ability to differentiate between color-coded warning signs, labels, and cables, • Ability to work in environments with a wide variety temperature inside a facility, • Ability to work outdoors in various weather conditions, including extreme temperatures, rain, or snow, • Capability to work in environments with elevated noise levels while wearing hearing protection, • Stepping into a role with a nationally recognized leader in the Mission Critical market, • Working with an employer who maintains a corporate philosophy to hire only our nation’s best Salute is an equal opportunity employer committed to celebrating diversity, creating an inclusive environment for all employees, and providing equal employment opportunities to all applicants; if you require a reasonable accommodation to participate in the job application or interview process, perform essential job functions, or receive other benefits and privileges of employment, please contact our Human Resources department at for more information.

Job DescriptionDescription: CLX Engineering is seeking a highly detail-oriented Electrical CAD Drafter with strong experience in industrial automation (not MEP). Our CAD Drafters read, edit, and correct electrical schematics for automated machinery, conveyors, control panels, and PLC systems. This position involves translating redlined drawings and engineering markups into accurate, build-ready CAD documentation. Candidates must be confident in their ability to spot and correct errors, work from existing designs, and follow established standards. This is a drafting role only — you will not be designing systems. What You’ll Do • Interpret and revise electrical drawings based on redlines and engineer-provided markups, • Draft power distribution, emergency stop, and logic control schematics, • Create panel layout drawings and motor control station diagrams, • Develop network wiring diagrams per engineering guidance, • Generate accurate bills of materials based on completed drawings, • Maintain CAD standards, drawing templates, and libraries, • Track and organize drawing sets through project phases to ensure consistency and accuracy, • Strong proficiency in AutoCAD Electrical, AutoCAD, and Adobe Acrobat Editor, • Proven ability to read, understand, and accurately reproduce complex electrical schematics and control panel layouts, • Familiarity with industrial automation hardware (e.g., PLCs, VFD, relays, sensors), • Experience with industrial automation, material handling, and electrical panel layout, • Familiarity with Microsoft Office tools (Word, Excel) and workflow platforms such as ClickUp, • Excellent attention to detail and the ability to recognize and correct inconsistencies or errors, • Clear communication skills and a professional, collaborative work approach, • At least 5 years of relevant drafting experience in an industrial automation environment To start, the schedule will be early morning through mid-afternoon to help you integrate with the team and understand the role's responsibilities. Once you're fully familiar with the job expectations and have a reliable process for accessing the information you need, your hours may shift to a more standard business schedule, if necessary. If you're a skilled drafter with a solid track record in electrical documentation for automation systems, and you take pride in getting the details right the first time, we’d love to hear from you! Why Join Us? Be part of a focused, collaborative team pushing the boundaries of airport technology. You'll work on cutting-edge projects for an engaged, forward-thinking client—where your contributions drive real innovation. We offer a strong benefits package and a work culture that values both excellence and balance. Requirements: Required Skills & Qualifications • Working experience creating CAD models in AutoCAD 2013 or higher, AutoCAD Electrical, formal education in CAD drafting/design is a plus., • Proficient with basic commands of at least one type of CAD system (ability to occasionally use higher-level commands, timesaving programs and routines), • Excellent Microsoft Office and/or Office 365 proficiency, • Use of AutoCAD and AutoCAD Electrical for electrical drawings, • A basic knowledge of standard electrical panel construction materials and methods., • Ability to work on complex projects with general direction and minimal guidance., • Ability to pass background check initial and random drug screenings, • Present a professional demeanor with very good verbal phone skills and clear writing and email skills, • Tenacity to get work completed and on time, • Attention to detail and ability to consistently turn in accurate, quality work, • All candidates must be able to pass a TSA level background check and a drug screen, • Industry experience, • A strong willingness to excel in current position for at least a year and then demonstrate the ability to grow technical skills, • Understanding of UL508A control panel standards are a plus

Job Description Position Summary: The Commissioning Engineer is responsible for the commissioning of hardware and software to customer specifications. This is a field support position reporting to the Service Manager. This position may also require oversight/management and site supervision to meet the project goals and schedules. He or she must work closely with the individual site teams to ensure that installations are complete, ready for startup, and the necessary resources and plans are in place for a successful startup and launch. The position requires travel and possibly extended stays at the job site(s). Essential Functions and Responsibilities • Provide commissioning for projects and products, • Conduct equipment start-up and debug, • Verify hardwired installation, • Debug controls, hardware, and software, • Record baseline data, • Mark up drawing changes, • Project performance and data collection, • Forecast project schedule, • Produce daily site reports, • Provide standby and customer support, • Support field personnel, • Support selection and controls of suppliers and Purchased Equipment vendors, • Assist with installation supervision as needed, • Perform preventive maintenance and inspections at customer sites, • Work as part of a team on major projects or individually on smaller projects, • Train customers on Durr Systems products, • Perform inspections of existing equipment and generate a field service report based on findings, • Bachelor's degree in electrical engineering (or equivalent experience) preferred., • Three or more years of position-related experience in industrial process equipment, air handling, and combustion systems or in a similar industry. Experience commissioning industrial equipment, working knowledge of abatement products preferred., • Computing/programming experience: PLC, HMI, Windows, and Office Suite, • Familiar with basic electrical and mechanical engineering principles, • Familiar with P&ID schematics and controls, • Familiar with regulatory standards (OSHA, NFPA, MSHA), • Proficient with PLCs (e.g., Rockwell, Siemens), • Able to read and interpret AutoCAD drawings, • Proficient with Microsoft Office: Word, Excel, and PowerPoint, • Good time management skills, • Good organizational skills, • Good verbal communication skills, • Good technical writing skills, • Able to work well independently and in a team environment, • Able to technically define problems and propose solutions, • Adaptable to change in a learning environment Reasonable accommodations may be made to enable people with disabilities to perform the essential functions of the job. Expected Hours of Work: This is a full-time position. Days and hours of work vary based on need. May be required to work holidays or weekends. Overtime may be required. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Dürr Systems, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Job Posted by ApplicantPro

Job Description About Cousins Properties: Headquartered in Atlanta, Cousins is a fully integrated, self-administered and self-managed real estate investment trust (REIT). Cousins has a simple, compelling strategy: Premier urban Sun Belt office portfolio, Disciplined about capital allocation, Best-in-class balance sheet, with Strong local operating platforms. Acting through its operating partnership, Cousins Properties LP, primarily invests in Class A office buildings located in high-growth Sun Belt markets. Cousins Properties (NYSE: CUZ) develops, owns, and manages a 20 million square foot trophy office portfolio in the high-growth Sun Belt markets of Atlanta, Austin, Charlotte, Dallas, Nashville, Tampa, and Phoenix. Founded in 1958, Cousins creates shareholder value through its extensive expertise in the development, acquisition, leasing, and management of high-quality real estate assets. The Company has a comprehensive strategy in place based on a simple platform, trophy assets, and opportunistic investments. For more information, please visit . Job Summary: The Building Engineer - Commercial Office will be responsible for the hands-on maintenance of building systems for the safe, efficient, and proper operations of all assigned properties. This role will perform repairs and help in the operation, monitoring, and performance of preventative maintenance on building systems as necessary. This position is located in Atlanta, GA. This position is on-site. This is not a remote or hybrid position. (For Cousins' internal candidates - this is equivalent to a Grade I Engineer position.) Responsibilities: Electrical Systems: • Possess an understanding of A.C. circuits and safety procedures, • Trouble-shoot and find short circuits or ground in single or three-phase A.C. circuits, • Possess an understanding of the refrigeration cycle. Must have passed the test for a universal CFC license, • Conduct preventative maintenance of air handling units, • Respond to HVAC calls and make repairs or adjustments as needed, • Test and adjust chemical treatment levels in water system, • Perform daily inspections on chillers. Make adjustments as necessary. Record findings in the chiller log., • Replace belts, motors, bearings, actuators, and valves on air handling units and cooling towers, • Adjust pneumatic or direct digital control (DDC) controllers and actuators for proper operation, • Adjust set points, start-up and temperature on building energy management system, • Trouble-shoot power induction units (PIU) or Fan Powered Terminal Units (FPIU) to determine if operating properly, • Possess an understanding of the plumbing systems, • Rebuild and repair flush valves and faucets., • Responsible for the replacement of wax bowel seal, remounting of toilet urinals and lavatories., • Responsible for the preventative maintenance of a systems pump., • Possess an understanding of the operation of the property’s life safety systems, • Identify and respond to fire alarm and trouble calls. Properly enable and disable points., • Repair and replace door closures, door hardware and door operators, • Adjust and repair security systems Required or Preferred Knowledge, Skills, and Abilities: • A minimum of six years of experience in the building maintenance industry., • High School Diploma or GED required., • Must be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, volt meter, manual drain auger, plumber’s helper, safety goggles, ear protection, and fire extinguisher., • Extensive knowledge in Chiller and Boiler operations is required. Must be able to operate heavy equipment such as chillers, generators, switchgear, pumps, air handling units etc., • Must have excellent organizational and problem-solving skills., • Must possess excellent customer service skills., • Must be a team player, able to work outside the core business hours when needed and willing to accept a variety of tasks associated with this position., • Must possess strong interpersonal skills and an ability to work and communicate effectively with all levels of operations., • Must be a self-starter and able to work well with minimal supervision., • Must be able to speak, read, write, and understand the primary language(s) used in the workplace., • Must be willing to work rotating shifts., • Responsiveness – Need to perform responsibilities with an acute sense of urgency to meet the needs of others; respond to solve problems; willing to accept a variety of tasks associated with this position, • Integrity - Demonstrate sound business ethics; consistently comply with organizational values; protect confidential information, • Customer Service – Demonstrate optimum customer service delivery while performing all job functions, • Communication - Able to clearly express ideas; present verbal information in a straightforward manner; ask questions in order to open channels of communication; listen to understand perspective of others Physical Demands: • Must be able to stand and exert well-paced mobility for up to 4 hours in length, • Must be able to bend, stoop, squat, and stretch to fulfill cleaning and repair/maintenance tasks, • Must be able to lift up to 50 lbs. on a regular and continuing basis

Job Description Hiring for Multiple Position Job Overview: 4P Consulting Inc. is seeking a highly motivated and experienced Protection & Control (P&C) Field Services Technician to join our team in Forest Park, GA. The ideal candidate will be responsible for commissioning, testing, maintaining, and troubleshooting protective relaying, control systems, and communication equipment associated with substation and transmission power lines. This position offers hands-on field experience, and the successful candidate will work closely with internal and external stakeholders to ensure the completion of projects safely, efficiently, and within schedule. Job Responsibilities: • Commissioning and Maintenance: Commission, test, maintain, and troubleshoot protective relays, control systems, and communication equipment associated with substations and transmission power lines., • Project Coordination: Manage construction projects and substation routines, ensuring timely completion with no service interruptions. Manage clearances effectively to meet quality, schedule, and budget targets., • Outage Coordination: Coordinate substation outages and commissioning activities with multiple internal and external stakeholders. Respond to trouble calls as needed., • Safety and Quality: Develop and apply safe work practices to prevent safety and operational incidents. Follow formal written requirements and conduct job briefings to identify and mitigate risks., • Technical Expertise: Develop and share knowledge in 3-phase power, relaying, SCADA, and substation testing techniques with team members and stakeholders. Education Requirements: • 4-year Bachelor’s Degree in Engineering, or, • 4-year BS Degree in Engineering Technology, or, • 2-year technical degree in electrical maintenance, or, • Protection & Control (P&C) Field Services experience preferred., • Electric power utility transmission construction, maintenance, or operations experience., • Knowledge of 3-phase power systems, AC/DC Protection & Control schemes, and fault analysis., • Familiarity with test equipment such as voltmeters, ammeters, ohmmeters, communication instruments, and computerized relay test sets., • Strong problem-solving skills and ability to manage projects with multiple priorities., • Excellent communication skills across multiple work groups, including customers, employees, and leadership., • Proficient in Microsoft Office applications (Word, Excel, PowerPoint, Teams, etc.)., • Valid driver’s license., • Ability to participate in callout rotation and respond to outages or abnormal conditions outside normal work hours., • Overnight travel may be required., • Safety-sensitive position subject to relevant pre-employment screening(s) (background check, drug screen, NERC Background check)., • Ability to work in a substation environment and perform physical duties, including operating manual switches., • Safety First: Prioritize safety in all aspects of work, following guidelines and procedures to ensure personal and team safety., • Intentional Inclusion: Actively contribute to a diverse, inclusive, and supportive work environment., • Integrity and Performance: Demonstrate integrity in all interactions and work practices while striving for superior performance., • Self-Motivated: Capable of working independently and producing results without direct supervision., • Customer & Quality Focused: Focus on customer satisfaction and consistently delivering high-quality results., • Hands-On Field Experience: Desire to work outdoors and gain hands-on experience in the field., • Active Learner: Seek continuous improvement by expanding knowledge of GPC and Southern Company maintenance practices, guidelines, and procedures.

Job Description Position Title: Senior Electrical Engineer Company Overview: S. L. King & Associates, Inc. is a leading provider of Mechanical, Electrical, and Plumbing (MEP) solutions, dedicated to delivering innovative and sustainable engineering solutions to our clients across various industries. With a commitment to excellence and a focus on cutting-edge technology, we strive to exceed our clients' expectations in every project we undertake. Position Overview: We are seeking an experienced Senior Electrical Engineer to be part of our electrical engineering team in delivering innovative electrical and instrumentation control solutions for water/wastewater projects. As a key member of our team, you will be responsible for designing, analyzing, and overseeing the implementation of electrical systems, instrumentation control, and P&IDs to ensure they meet project requirements and industry standards. Your expertise will contribute to the successful delivery of complex projects and the continued growth of our company. Key Responsibilities: • Lead the design and development of electrical systems, including power distribution, lighting, communication, and all other power components and electrical specifications. Also, provide all instrumentation and control design and provide P&ID’s and specifications., • Provide technical leadership and mentorship to junior engineers and design staff, ensuring the quality and accuracy of engineering deliverables., • Conduct detailed electrical calculations, load analyses, and short circuit studies using engineering software and tools., • Prepare comprehensive engineering drawings, specifications, and construction documents in compliance with applicable codes, standards, and regulations., • Collaborate with multidisciplinary teams, including architects, mechanical engineers, and clients, to integrate electrical systems with overall building designs., • Evaluate and select electrical equipment, components, and materials based on project requirements, performance criteria, and budget constraints., • Review contractor submittals, shop drawings, and requests for information (RFIs) to ensure compliance with design specifications and contract documents., • Perform site visits and inspections during construction to monitor the installation and commissioning of electrical systems and resolve any technical issues that may arise., • Stay abreast of industry trends, emerging technologies, and best practices in electrical engineering to continually enhance the company's capabilities and expertise. Qualifications:, • Bachelor's degree in Electrical Engineering or related field., • Professional Engineer (PE) license required., • 5+ years of progressive experience in electrical engineering, preferably in Watger/Wastewater and/or Industrial consulting or design., • Expertise in electrical design software (e.g., AutoCAD, Revit MEP, SKM PowerTools) and other relevant engineering tools., • Strong knowledge of electrical codes, standards, and regulations, including NEC, NFPA, and IEEE., • Proven track record of successfully leading and managing electrical engineering projects from conception to completion., • Excellent communication, leadership, and interpersonal skills, with the ability to effectively collaborate with internal teams and external stakeholders., • Demonstrated ability to prioritize tasks, meet deadlines, and manage multiple projects concurrently., • Strong analytical and problem-solving skills, with keen attention to detail and accuracy. Benefits: • 2 weeks per year paid time off (PTO), as well as paid holidays offered by the Company.• Participate in the Company’s 401 (k) plan • Company benefits that include medical, dental, vision, life insurance, short-term and long- term disability plans, as well as plans offered by ALFAC. Application Process: If you are passionate about electrical engineering and eager to make a difference in the Water/Wastewater industry, we invite you to send your resume and cover letter to Dorice Bostic . We look forward to welcoming you to our team!

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal Technology Services® is hiring a Service Technician to drive our mission of being the world's most trusted service provider. The technician will perform service, maintenance, repair, and diagnostics on access control systems and IP-based video equipment, including electrified/non-electrified locks, card readers, IP/analog cameras, intercoms, video recorders, and wired/wireless systems. WHAT TO EXPECT AS A SECURITY INSTALLATION TECHNICIAN II: • Travel to commercial client sites to service, identify, repair, troubleshoot, and detect access control equipment and IP-based video security systems. Including but not limited to:, • Electrified/non-electrified locks, card readers, ancillary door devices, • IP/analog cameras, head-end video recording devices, • Wired/wireless systems and intercom systems, • Troubleshoot and resolve installation issues efficiently and effectively to ensure company compliance, standards and building codes, as well as company safety policies and procedures, • Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.), • Supervise Installation Technician I's on a job as assigned by the Installation Manager, • Run electrical wiring; related activities to include drilling, trenching, and aerial runs, • Minimum of three (3) years of field experience in the electronic security industry installing and troubleshooting access control, video management and intrusion detection solutions, • Ability to be on-call on a rotational basis, • High school diploma or equivalent, • Must possess a valid Driver's License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a company issued vehicle, • Possession of state specific licensing or ability to obtain and hold license once hired, • Ability to meet deadlines and work in a fast based environment with minimum direction, • Good communication skills for effective interaction with internal & external customers, • Strong troubleshooting skills and mechanical aptitude, • Must be detail-oriented and organized, • Ability to complete time entry from home on a daily basis via the Internet, • Highly skilled in the electronic security industry, • Company Vehicle + Gas Card, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EL1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1457419

Job DescriptionWe are seeking a highly skilled and motivated B1 Licensed Aircraft Engineer to join our team. In this role, you will be responsible for ensuring the safety, airworthiness, and operational readiness of aircraft. As a B1 Licensed Aircraft Engineer, you will work closely with a team of engineers and technicians, providing technical expertise for the maintenance and repair of aircraft systems, including the structure, engines, and mechanical systems. Your key responsibilities will include troubleshooting, performing routine maintenance, and conducting complex inspections to meet both regulatory standards and our operational excellence. If you are a detail-oriented professional with a passion for aviation, this position offers an exciting opportunity to work in a fast-paced, dynamic environment.Key Responsibilities: • Perform scheduled and unscheduled maintenance tasks on aircraft in accordance with company and regulatory guidelines., • Troubleshoot and repair aircraft systems, including hydraulic, pneumatic, and mechanical components., • Conduct pre-flight and post-flight inspections to ensure aircraft safety and compliance., • Diagnose issues and determine the necessary course of action for repairs or replacements., • Complete maintenance logs and reports accurately to document all work performed., • Work closely with flight crews to ensure the timely and safe return of aircraft to service., • Ensure that all tools, equipment, and facilities used in maintenance are kept in good condition and properly calibrated., • Supervise and mentor junior maintenance staff and technicians., • Liaise with regulatory authorities during inspections and audits., • Stay updated on industry regulations and technology advancements.Qualifications:, • Valid EASA Part 66 B1 License (or equivalent recognized by local aviation authorities)., • Strong knowledge of aircraft systems, including engines, landing gear, airframes, and associated mechanical and hydraulic systems., • Minimum of 3 years of experience working on aircraft maintenance, repairs, or modifications., • Experience with both scheduled and unscheduled maintenance., • Ability to read and interpret technical manuals, blueprints, and engineering drawings., • Excellent troubleshooting and problem-solving skills., • Strong attention to detail and commitment to safety., • Ability to work in a fast-paced environment with minimal supervision., • Excellent communication skills and ability to work as part of a team.Preferred Qualifications:, • EASA Part 66 B1 License or equivalent qualification (e.g., FAA A&P License, CAA B1 License)., • Aircraft Type Ratings on relevant aircraft models (e.g., Airbus, Boeing, Bombardier, etc.)., • Valid Human Factors certification., • Current EWIS (Electrical Wiring Interconnection System) certificate., • Fuel Tank Safety certification (Level 1 and 2 preferred)., • Updated training on relevant regulations (Part 145, Part M, etc.)., • Type ratings on multiple aircraft types., • Experience in both line and base maintenance environments.

Job Description HI, Hope you're doing well This is Pankaj from 4P Consulting please see details below job description P&C Test Engineer/ P&C Technician (1,2,3) Location: Atlanta, GA 30318 (Onsite) Contract: 36-Months Skills, & Abilities: · Knowledge of electrical system operations, distribution systems, and underground construction practices. - Knowledge of SCADA, RTU, PLC, DCS, GIS is preferred. · Ability to read electrical wiring diagrams, troubleshoot equipment, and make sound decisions under pressure. · Ability to work in adverse conditions (heat, cold, wet, etc.) outdoors and to access below grade, tightly enclosed spaces by means of ladders up to 35ft in length. · Proficiency with MS office products and other related engineering software systems. · Ability to prioritize and organize work to manage multiple tasks and meet strict deadlines. · Must be able to build relationships and communicate with customers, engineers, sales, corporate partners, and crew personnel. · Demonstrate good oral and written communication skills. · Ability to prioritize customer service both internally and externally. · Follow through on all aspects of assignments to ensure quality completion. · Must be able to follow safe work practices & policies for a Safety Excellence environment. · Be self-motivated and directed. - Demonstrate initiative, dedication, and willingness to JOB SUMMARY · The Network Underground P&C Test Engineer role ensures the safe and efficient installation, operation, maintenance, and repair of the Network Underground Systems in Atlanta, Macon, Columbus, Augusta, Athens, Savannah, and Valdosta. · Responsibilities include working on energized equipment in enclosed spaces that are below grade, writing switching orders and utilizing hot line tools to perform circuit switching on medium voltage equipment (4KV to 25KV), assisting in the development and implementation of new technology for SCADA system monitoring, participating in an on-call rotation and responding to system emergencies and concerns as they arise, handling customer inquiries (voltage complaints, claims, etc.), and communicating effectively with high profile customers to ensure the highest level of customer satisfaction. Education and Experience: · Bachelor's Degree in Engineering (Mechanical , Electrical is preferred) Or · Associate’s Degree in Electrical, Industrial, Electronics Technology and Experience performing in an engineering capacity the skills and abilities listed above Knowledge Thanks and Regards Sr. Talent Acquisition Specialist Pankaj Mishra +1 205-756-4834

Job Description About Us CP Group, a vertically integrated commercial real estate and management firm, has been a leading owner-operator and developer of commercial real estate throughout the Sunbelt since 1986. Today, CP Group is the largest office landlord in Florida, Atlanta's largest private commercial property owner, and in the top 25 of largest office landlords in the United States. CP Group brings an extensive track record and unparalleled market insight to advance investors' opportunities in the region's most dynamic markets. Headquartered in Boca Raton, Florida, the company has a corporate office in Atlanta and regional offices in Dallas, Denver, Jacksonville, Miami, and Washington DC. Title: Building Engineer Location: Atlanta (Buckhead) The Building Engineer works as part of a team reporting to the Chief Engineer and is responsible for ensuring the efficient operation and maintenance of HVAC, mechanical, electrical, plumbing, water treatment and life safety equipment and systems. The Building Engineer must have the technical aptitude for building maintenance and repair as well as a can-do attitude and positive communication style that offers tenants high levels of customer service and a strong sense of confidence for timely resolution. Essential Responsibilities: • Perform plumbing, electrical, or HVAC requirements of the building, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Monitor and adjust all mechanical/pneumatic equipment, VFDs, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings, • Verify field conditions and perform any necessary repairs or adjustments, • Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property, • Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories), • Perform preventive maintenance duties in accordance with OEM standards, building protocol, manufacturer recommendations and industry best practices., • Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps., • Trouble shoot and repair base building systems, • Conduct ongoing quality control inspections, • Reinstall or replace signage, verify rooms are clean and clear of obstructions and debris, • Do drywall, door, locks, cabinets, wall-covering, baseboard and other repairs, • Manage structural repairs such as doors, roof/glass leaks, • Respond to punch list items for tenant build outs, • Check for operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, OEM standards, building protocol and as directed by supervisors, • Respond immediately to emergency situations (fire, evacuation, equipment failure) and tenant concerns, • Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits, • Complete all required Safety Training as scheduled, • Comply with Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours, • Inspect Buildings during inclement weather, • Additional duties as assignedQualifications:, • Can do initiative, solutions-oriented attitude, good communicator, • Technical mechanical knowledge and proficiency, • Ability to ascertain what repairs are most urgent in nature and prioritize, • Minimum high school diploma or GED Equivalent, • 3-5 years related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting, • Universal CFC certification, • Appropriate license/permit for trade as may be required, e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.), • Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc., • Knowledgeable in energy management systems, energy reduction techniques and, • Knowledge of front-end Building Automations Systems, • Thorough knowledge in all building systems operations, maintenance, and, • Basic Computing Skills in Outlook, Excel & Word Benefits: We offer a competitive benefits package, including: • Unlimited vacation, summer Fridays, and 9 company holidays, • Company-paid life and disability insurance, • Company-subsidized medical, dental, and vision insurance, • Voluntary insurance including supplemental life insurance, pet insurance, critical illness, accident, hospital, legal, and cancer insurance., • 401(k) with company match #LI-Onsite

Job Description Job Title: Senior Project Manager – Mechanical (preferred) or Electrical Background (PE License Required) Experience: Minimum of 10 years (Open to a minimum of 8 years if other criteria are met) Location: Atlanta (Smyrna), Georgia Position Overview: We are seeking a Senior Project Manager with a background in mechanical (preferred) or electrical engineering, requiring a PE license. This role will focus primarily on projects within the higher education and K-12 sectors, with openness to other commercial markets. Responsibilities: Management: • Cultivate and expand crucial business relationships necessary for project success; engage in business development activities with existing clients., • Collaborate with the design team to finalize man-hour budgets based on discipline work plans, defining tasks and hours required for completion., • Liaise with clients to understand schedule expectations; propose interim milestones to ensure timely information flow, adjusting as needed throughout the project lifecycle., • Coordinate and communicate project schedules to the team; monitor manpower needs and update resource projections in eResource., • Assist in developing project staffing plans and initial man-hour budgets in conjunction with Senior Project Managers, CRMs, Department Heads, or Location Leaders as appropriate., • Oversee the Construction Administration (CA) process by assigning CA personnel to ensure building systems adhere to design specifications and quality standards., • Possess a technical or bachelor's degree in a relevant discipline practiced by the firm, complemented by ten years of practical experience in similar projects., • Preferably have experience in healthcare building design., • Required Education: Bachelor's Degree in Science, • Focus specifically on higher education and K-12 markets, with consideration for other commercial sectors.

Job DescriptionSalary: DOE Position: Construction Project ManagerOnsite Representative Position Description: Construction Project Manager acts as assistant to the employers representative. Project Manager is responsible for the delivery of the project and will be supported by a site-based team during the construction, fit-out and commissioning and handover phases of the project. Responsibilities: • Set up, chair and minute all client meetings, ensuring that DCD, DCE and DCOPs are fully informed, • Provide report on a weekly basis to the DCD PM of scope, budget, program status, and any other issues arising, • Liaise with the client, professional team and contractor to establish all key project processes and monitor these processes reporting and making recommendations to the client., • Engage FAT / SAT attendance and vendor attendance to site as appropriate, • Liaise with the client, professional team and contractors to establish, review and regularly update the project risk register. Agree and monitor risk mitigation plans and provide input into quantitative risk analysis reviews, • Initiate any actions / escalations such as acceleration programs for tasks falling behind and impacting critical path, • Monitor and report on commissioning process, checking that the commissioning agent has developed a commissioning plan and all necessary test sheets and documentation, • Liaise with operations team to coordinate involvement in all installation, commissioning and snagging activities, • Coordinate all parties to complete practical completion documentation and that all manuals are submitted and approved to an agreed schedule Project Manager is also expected to support the DCD project manager with the following: • Drive LLE, M&E and other technical design issues through to completion, • Monitor and report on LLE, M&E and other construction coordination on site, • Prepare reports for Microsoft stakeholders on LLE and M&E vendor issues, • Prepare and issue for DCD PMs approval a monthly project managers report, weekly status update reports and provide input into other stakeholder reports and presentations as may be required, • Provide supporting information for the DCD PMs input into payment application reports and assist cost manager to present these for approval to Microsoft management, • Support the change management process by liaising with the Client, Professional Team and Contractor in clarifying all necessary scope, justification and technical detail, • Liaise with the Professional Team around time/scope impacts assessments, and validity for change or variation events, • Manage general contractor around technical and status meetings, • Report on general contractor and vendor adherence to the commissioning tagging process, • Assist in identifying early warning of construction, mechanical and electrical risks and issues, • Manage general contractor through identification and execution of recovery against works identified as critical path and potential schedule slippage, • Monitor site works and record and report non-conforming work and drive the team for follow up, preventative, and close out actions, • Manage general contractor to undertake regular site mechanical and electrical quality audits and witness site tests as may be necessary, • Chair and manage risk workshops, • Establish and manage risk, change management processes, and promote project team compliance to project process, • Monitor and use reasonable endeavors to manage general contractor in line with company health and safety standards, • Manage general contractor to prepare all necessary schedules for the handover of the project and liaise with integration manager, commissioning manager and operations manager on agreement with schedules, • Manage general contractor in timely preparation of system startup books and operations and maintenance manuals, • Manage general contractor in the preparation and room handover documentation with input as necessary from the architect engineer, • Promote a team approach to punch-list development using the tools made available for the project, • Liaise with operations / security operations and check that systems and permits are in place to enable general contractor to access the site and complete any necessary remedial works post lock-down and turn-over, • Strong competencies in leadership, program/project management, • Excellent communication, facilitation, and collaboration skills,, • Exceptional stakeholder identification, engagement, and ongoing management to drive clarity on roles, alignment on desired outcomes and agreement on the specific plan and next steps to get there., • Ability to think beyond existing boundaries., • High performance amidst ambiguity and complexity, • Bachelors degree in Construction Project Management, Architecture, Engineering, or related field, • A minimum of 10 years, • OSHA 10 Hour, • Understands how to read drawings and interpret building codes., • Hours are 6:30 to 4:30, • Experience with Hyperscale Data Center Builds, • 10+ years of experience, • OSHA 30 Hour

We are seeking a highly motivated Electrical Design Engineer to join our team in the Atlanta or Remote that will support Mission Critical construction operations throughout the country. Takes initiative to identify, track and actively address design and engineering challenges during the design and c

About Nephrodite We are an Atlanta based start-up united in our mission to empower patients with kidney failure and on dialysis toward mobility and freedom through life-enhancing care. Through novel and intelligent technology, we expand the potential of better health and health outcomes without constraints or tethers. We strive to foster an inclusive and diverse team, committed to making a difference. We believe great ideas can come from anywhere—we strive to foster an inclusive culture built around diversity of thought and mutual respect. We lead with inclusion and empower our team members to do their best work as their most authentic selves. Passionate people who want to make a difference drive our culture—our team members are grounded in integrity, have a strong capacity to learn, the energy to get things done, and bring diverse, real-world experiences to help us think in new ways. We actively invest in our team members to support their long-term growth so they can continue to advance our mission and achieve their highest potential. Job Description The product development engineer will contribute to the development of new technology concepts and prototypes as well as the continuous improvement of existing mechanical and electrical systems. The ideal candidate will have a strong background in electrical engineering, biomedical engineering or related disciplines and will be familiar with medical device design, rapid prototyping and iterative design. You will work as part of our in-house research and development team and be expected to regularly interface with our development partners for different aspects of the device. We are looking for someone with the ability to keenly observe the ESRD environment and dialysis ecosystem, quickly absorb relevant information, help identify device development needs and risks, and manage the execution of assessments and design verifications to drive product development. Roles And Responsibilities Roles and responsibilities will include designing and testing mechanical, electronic and fluidic systems, concept development, and new product development, among other areas. Experience with sensors (optical, electrical, pressure, etc), microcontrollers and hardware-software interfaces are a must. You should be a highly organized individual with a demonstrated ability for critical thought and data analysis. You will be required to keep meticulous records of experiments, collected data and device design iterations in compliance with FDA regulations and ISO 13485 design controls. You will be involved in the different aspects of device development, assess areas of new or added functionality for the device, identify areas for improvement and how any changes might be implemented. Effective communication with the respective teams involved with development of the device is required. Responsibilities and Requirements · BSc degree in electrical engineering, computer science, biomedical engineering or related fields. · Material and Sensor Selection: Evaluate and select appropriate materials for prototypes and final products, considering factors such as biocompatibility, durability, power consumption and cost-effectiveness. · Collaboration: Work closely with cross-functional teams, including R&D, clinical, and manufacturing, to ensure design feasibility and alignment with project goals. · Testing & Verification: Conduct bench-top testing and analysis of prototypes to validate design assumptions and ensure performance specifications are met. · Documentation: Maintain detailed documentation of design processes, prototype iterations, and testing results to support regulatory submissions and intellectual property filings. Understanding of Design Controls and other applicable ISO 13485 guidelines Relevant Technical Skills • Proficiency in C and/or C++ (embedded firmware), • Experience with microcontrollers (ARM Cortex, etc.) or SoCs used in medical devices, • Experience designing/working with sensors (flow, optical, weight, electrical, pressure, etc.), including understanding characteristics (noise, drift, calibration, signal conditioning), • Experience with stepper motor control, • Data acquisition, signal processing (filtering, digital signal processing) when sensor signals are involved, • Hardware-software interfacing: I2C, SPI, UART, ADC/DAC, GPIOs, • Experience with RTOS (or no-OS) embedded real-time systems, • Firmware debugging tools: oscilloscopes, logic analyzers, JTAG/SWD or similar, • PCB/schematic understanding or ability to collaborate closely with hardware teams (sometimes doing own schematic reviews), • Understanding of design controls, risk management (ISO 14971), • Regulatory documentation experience (traceability, test protocols, design history files), • Knowledge of medical device regulatory standards (e.g. FDA 21 CFR part 820, ISO 13485) Nice to have • Experience with wireless / BLE / Bluetooth, RF, • Low power / battery powered design experience, • Familiarity with manufacturing / robust design / DFMEA / process validation

Holder Construction is an ENR Top 25 industry leader with operations throughout the United States. We are currently seeking highly motivated construction professionals to join our company in MEP Preconstruction. Holder’s MEP Preconstruction department is currently located in our Atlanta office. Opportunities in our MEP Preconstruction Department may exist in Charlotte, NC; Dallas, TX; Denver, CO; Phoenix, AZ; and Washington, D.C. Primary Responsibilities • Work with project teams to lead and manage MEP preconstruction activities, including estimating, design management, and subcontractor/vendor procurement., • Communication with electrical/mechanical equipment vendors, electrical/mechanical design engineers, clients, and subcontractors. Internal communication responsibility amongst the different departments and project stakeholders., • Prepare comparative analysis to previous (internal and external) estimates and develop a clear and concise explanation of the variances for each of the project stakeholders., • Coordinate with teams of preconstruction Engineers to develop a complete scope of work centered around MEP systems to help teams avoid typical “gotcha’s” as well as guide teams through atypical situations., • Prepare detailed MEP analyses of subcontractor and vendor bid proposals along with recommendations for award. Include a comprehensive analysis of all project risks and challenges against the client’s project schedule and budget., • Opportunity to move up to train and develop preconstruction engineers for complete technical and non-technical development in the world of MEP systems, • Lead responses to RFPs, which enhance Holder’s reputation and consideration by clients for current and future opportunities., • Represent Holder at all design/coordination meetings, industry events, as well as maintaining positive relationships with subcontractors, vendors, and our clients/owners., • Ownership for the creation, updating, and presentation of project deliverables and tools to our clients., • Support meetings with the owner, architect, and engineer for all aspects of the preconstruction phase of the project. Requirements For This Position Include • Bachelor’s degree in Mechanical or Electrical Engineering or Construction Management or have MEP subcontractor preconstruction experience., • The ideal candidate will have 5+ years of preconstruction experience in mechanical, electrical, plumbing, and/or building automation systems/power monitoring systems., • Ability to read and understand electrical, HVAC, plumbing, architectural, and civil plans and specifications., • Familiar with standard concepts, practices, and procedures of MEP Systems and equipment., • Experience leading a team of MEP Project Engineers / Estimators., • Outstanding communication and time management skills., • Ability to work in a collaborative environment including:, • Accepts and adapts to change in a professionally appropriate and thoughtful manner, • Effectively communicates and listens, • Looks to continually improve and grow, • Organizes and uses meeting time effectively, • Lead by example via a work ethic and effort above-standard in the industry, • Presents ideas in a manner that is clear, concise, and easy to understand, • Able to handle confrontation in a professional and constructive manner, • Proven ability to develop the team around them, including:, • Enables others to act, • Emphasizes the importance of people’s contributions, • Engages others and encourages high performance, • Engages in radical candor that develops others while being professional and respectful, • Willing to accept constructive criticism from others to improve themselves

Holder Construction is an ENR Top 25 industry leader with operations throughout the United States. We are currently seeking highly motivated construction professionals to join our company in MEP Preconstruction. Holder’s MEP Preconstruction department is currently located in our Atlanta office. Primary Responsibilities • Work with project teams to lead and manage MEP preconstruction activities, including estimating, design management, and subcontractor/vendor procurement., • Communication with electrical/mechanical equipment vendors, electrical/mechanical design engineers, clients, and subcontractors. Internal communication responsibility amongst the different departments and project stakeholders., • Prepare comparative analysis to previous (internal and external) estimates and develop a clear and concise explanation of the variances for each of the project stakeholders., • Lead and coordinate teams of preconstruction Engineers to develop a complete scope of work centered around MEP systems to help teams avoid typical “gotcha’s” as well as guide teams through atypical situations., • Prepare detailed MEP analyses of subcontractor and vendor bid proposals along with recommendations for award. Include a comprehensive analysis of all project risks and challenges against the client’s project schedule and budget., • Train and develop preconstruction engineers for complete technical and non-technical development in the world of MEP systems, • Lead responses to RFPs which enhance Holder’s reputation and consideration by clients for current and future opportunities., • Represent Holder at all design/coordination meetings, industry events, as well as maintaining positive relationships with subcontractors, vendors, and our clients/owners., • Ownership for creating, updating, and presenting project deliverables and tools to our clients., • Support meetings with the owner, architect, and engineer for all aspects of the preconstruction phase of the project. Requirements For This Position Include • Bachelor’s degree in Mechanical or Electrical Engineering, or Construction Management or have MEP subcontractor preconstruction experience., • The ideal candidate will have 7+ years of preconstruction experience specific to mechanical, electrical, plumbing, and/or building automation systems/power monitoring systems., • Ability to read and understand electrical, HVAC, plumbing, architectural, and civil plans and specifications., • Familiar with standard concepts, practices, and procedures of MEP Systems and equipment., • Experience leading a team of MEP Project Engineers / Estimators., • Outstanding communication and time management skills., • Ability to work in a collaborative environment including:, • Accepts and adapts to change in a professionally appropriate and thoughtful manner, • Effectively communicates and listens, • Looks to continually improve and grow, • Organizes and uses meeting time effectively, • Lead by example via a work ethic and effort above standard in the industry, • Presents ideas in a manner that is clear, concise, and easy to understand, • Able to handle confrontation in a professional and constructive manner, • Proven ability to develop the team around them, including:, • Enables others to act, • Emphasizes the importance of people’s contributions, • Engages others and encourages high performance, • Engages in radical candor that develops others while being professional and respectful, • Willing to accept constructive criticism from others to improve themselves

Kleinfelder is looking for a detail-oriented Senior Land Design Engineer to join our southeast engineering team. With expanding opportunities in the region and a variety of clients, the ideal candidate will join our high achieving, fast-paced team. Excellent communication skills with the willingness to take on responsibilities are valued attributes for this position. The project work will be multi-disciplinary in nature, but experience in traditional industrial/commercial land development, solar, and/or mining is especially relevant. This is a hybrid office role and can be based in: • Charlotte, North Carolina, • Raleigh, North Carolina, • Atlanta, Georgia Key responsibilities include: Under supervision and working with experienced staff, the successful candidate will complete civil engineering designs and the generation of professional plans and specifications, technical calculations, exhibits and reports in the following areas: • Site Layout, Grading, Storm Drainage, Water & Sewer Utilities, • Erosion and Sediment Control, • Storm Water Best Management Practices, • Variety of Civil 3D Plans, exhibits, and technical deliverables, • Municipal and State permitting And will be supporting clients by: • Evaluating design to solve constructability, municipal code, and site challenges., • Coordinating with Architects, Mechanical, Electrical, and Plumbing Engineers, • Performing site visits to perform job scoping and coordination with survey crews, SUE, Geotech, etc., • Periodic construction support to include: review of RFIs & Shop Drawings, field inspections, etc. Education/Certification: • Required, Bachelor of Science Degree in Engineering, • Preferred, Professional Engineer (PE) or ability to obtain within 6 months Skills & Experience: • Excellent written and verbal communication skills, • Self-starter who can work independently and with team members, • Ability to engage in multiple projects to complete successful requirement deliveries, • Ability to organize priorities and multi-task effectively, • Pro-actively troubleshoot and problem-solve with practical, client-focused solutions, • Experience dealing with regulatory agencies and review professionals, • 3-8+ years of related experience in civil engineering, • Computer skills preferred: AutoCAD Civil 3D, HydroCAD, WaterCAD, MS Office Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients’ transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 85 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose – together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer – Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. About Clayco Systems and Equipment Innovations (SEI) As part of our integrated service offerings, Clayco’s Systems and Equipment Innovations (SEI) offers a turnkey solution to execute complex building systems and process systems. Clayco SEI provides preconstruction, design, purchasing, and installation of mechanical, electrical, and process scopes of work. The Role We Want You For As a Project Engineer with SEI, you will be based on a construction project site. In this role you will use your education and knowledge to support the Project Manager by providing technical support, documenting, and reporting project activities and meetings. The work to be performed may consist of various scopes including structural, mechanical, electrical, and other trades related to building and process systems on highly complex projects nationwide., construction, start up, and testing on highly complex projects nationwide. These responsibilities will cover the full life cycle of the project including planning, construction, start up, testing, commissioning, and turnover. All these functions will have a specific focus relative to self-perform execution of respective scopes of work. The Specifics of the Role • Build client and subcontractor relationships., • Team with Architects, Engineers, and Planners to create and manage a design schedule., • Assist in the planning process., • Assist in the establishment of project forecasts and budgets., • Assists in the reporting of project status and cost., • Accept responsibility for project execution., • Mentor and develop Interns and new incoming project management staff., • Review PO’s & Negotiate Terms., • Receive, examine, and evaluate contractor quotes for changes., • Negotiate project and change costs., • Expedite Materials/Equipment., • Setup Equipment Status Tracking., • Setup Material Tracking., • Expedite deliveries to meet schedule., • Assist in managing Design Trades., • Oversee Accountability for schedule/coordination/document control., • Contract management for installation subcontractors., • Cost control for equipment, materials, and installation., • Schedule management/input for process scopes., • Input progress/productivity updates in tracking systems and provide data output to the team for use in management of project execution., • Participate in cost review meetings and regularly update cost tracking systems., • Assist superintendents with punch list tracking, capturing safety observations, and taking progress photos while walking the job., • Assist with site logistics preparation and maintenance., • May be involved with the preparation, monitoring, and distribution of RFIs and submittals., • Responsible for documenting meeting minutes., • Manage drawings, project closeouts, and turnovers., • Observe field activities to assist with the schedule., • Facilitate productivity reporting for self-performed trades and owner billings. Requirements • Bachelor’s Degree in Construction Management, Engineering, Architecture, or related degree preferred., • 0 to 5 years of experience managing construction projects, ideally design-build., • Demonstrated knowledge of construction principles, practices, and technology., • Previous experience on a successful project management team., • Ability to walk a job site, climb ladders, and scale multi-floor scaffolding., • Ability to lift objects of at least 50 lbs., • General knowledge of the construction industry. Some Things You Should Know • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco and SEI does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco and SEI? • 2024 Best Places to Work – Crain’s Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Description Performs Transmission Planning studies including steady-state power flow, transient/dynamic system analysis (including EMT), and/or system harmonic and power quality assessments. Provides technical expertise and analytical support for the transmission planning activities of the Corporation by performing transmission planning studies and evaluating electrical alternatives to support transmission system reliability. Supports Corporate regulatory compliance for transmission planning and related functions. Responsibilities • Perform power system modeling and analysis in assigned areas using industry standard and custom software, • Develop and coordinate transmission solutions that promote system reliability and resiliency, • Develop technical reports, capital project scopes and justifications, and other procedural documentation, • Participate in industry committees and transmission planning collaboratives with other electric entities as assigned, • Coordinate with capital project development and budgeting processes Qualifications • BSEE, Power Systems, required, Licensed PE and an advanced degree in Power Systems Engineering, preferred, • 6-8+ years of electric utility power systems analysis or planning focused on transmission system planning, • Proven experience with power system transmission analysis tools such as PSSE, TARA, EMT, PSCAD or other similar analysis software, • Effective communicator who develops relationships, works cross-functionally and communicates persuasively, • Strong understanding of electrical engineering concepts such as reliability, load flow, stability, short circuit, voltage regulation, transients, etc., • Must be able to pass a NERC CIP personnel risk assessment screening. Company Brief Transmission-only electric cooperative that plans, builds and maintains the high-voltage electrical infrastructure that delivers power to Georgia’s 38 Electric Membership Corporations providing electricity to over 4.5 million Georgians. Senior Engineer, (Technical Lead) Transmission Planning- 2462m Visit our website for more details This position is being offered through Management Recruiters of Bonita Springs, Inc., who proudly supports Affirmative Action and Equal Opportunity Employment. We are committed to workforce diversity. M/F/D/V are encouraged to apply. Sponsorship is not available for this position. Key Words BSEE MSEE Electric Power Transmission system planning modeling PSSE PSCAD TARA engineering strategy Bulk Electric System Inverter-Based Resources (IBR) NERC Licensed Electrical Professional Engineer PE Electric Transmission system planning modeling interconnection compliance

Job Title: Field Service and Lab Engineer Location: Atlanta, GA (80% Travel/ International Travel) ABOUT US For years, Personnel Options has been a leading Human Resource Management firm in the Georgia area. If you are a Human Resource Manager or in charge of hiring for your business, we can help you achieve staffing success. If you are a plant manager or interested in adding value and savings to your bottom line, we can assist you in saving thousands of dollars. If you are looking for employment, or to find a better job and explore your opportunities, we can help you find what you are looking for. ABOUT OUR CLIENT We are currently working with a client, seeking qualified candidates for their Field Service and Lab Engineer position based out of Atlanta, GA. ABOUT THE JOB The role of the Field Service and Lab Engineer will be responsible for the following duties: Equipment Installation: • Installing Equipment and provide training to customers on how to operate it, • Communicate and cooperate with different subject matter experts to ensure a successful installation Troubleshoot & Repair Equipment: • Troubleshoot equipment to determine the cause of reported problems, • Analyze functional problems and their link to electrical controls and software setup, • Repair equipment to restore it to full functionality, • Show customers how to use equipment and advise them on best practices to keep their equipment functioning, • Professional in work ethic and appearance, • Represent company and must portray the highest professional image to customers

Job Description We are a leading provider of Distributed Antenna System (DAS) solutions for improved wireless coverage and capacity. Our team of experienced engineers and technicians work closely with clients in various industries to design, install, and maintain DAS networks that meet their specific connectivity needs. As a DAS Field Engineer at CED Systems, you will be responsible for the successful implementation and optimization of DAS networks. You will work closely with clients, project managers, and other team members to ensure the efficient and effective deployment of DAS solutions. This includes conducting site surveys, designing system configurations, installing and commissioning equipment, and performing troubleshooting and maintenance tasks. Essential Functions: Provide on-site technical expertise during integration, commissioning, testing, and optimizing of distributed antenna systems (DAS) and small cells. Serve as the key technical subject-matter expert within a region and/or program for complex in-building solutions for customers; be the liaison between Sales and the customer on technical matters; respond to technical inquiries and make technical recommendations as appropriate. Work with the technical experts of our customers, carriers, sub-contractors, solution engineers, design engineers, and field technicians to deploy and operationalize distributed antenna systems (DAS) and/or small cells. Lead and perform pre-and post-deployment survey activities for new iDAS/oDAS deployments utilizing software and tools. Lead and perform integration and commissioning during system deployments and field trials. Lead and perform pre-and post-deployment RF data collection and analysis efforts to help define and improve coverage requirements. Work with design engineers and other stakeholders to identify and correct system issues that surface during deployment and acceptance testing. Make technical recommendations to optimize and correct deficiencies. Document installations in accordance with internal and external standards and requirements, including hardware and software changes made in the field. Review customer deliverables, identify risks and plans to mitigate risks. Review and approve closeout packages. Turn-up and test DAS and Small Cell systems in accordance with customer and equipment manufacturer’s specifications Support integration and commissioning of equipment during deployments in accordance with system design and customer/carrier requirements Perform post-deployment data collection and acceptance testing to ensure requirements were met for coverage and capacity Troubleshoot and repair DAS and Small Cell systems as required Prepare and submit required project documentation Qualifications • Expert RF Engineer and Inbuilding DAS specialist with deep optimization skills and design experience., • Troubleshooting and analysis skills for walk tests log files, generating reports on DASs performance and providing recommendations to enhance the performance, • Hands-on experience on DAS OEM commissioning vendors: Commscope, SOLiD, Corning, JMA., • 3+ years working in and around the radio frequency industry designing, optimizing, analyzing performance, and troubleshooting repeaters, iDAS, oDAS, and Small Cells for 5G and LTE networks, • Working knowledge of various wireless technologies, (e.g. CDMA, EVDO, GSM, W-CDMA, LTE and Wi-Fi), • Strong working knowledge of RF test equipment (e.g. Spectrum Analyzer, JDSU, Anritsu, Solutelia, etc.), • Strong working knowledge of structured cabling (e.g. CATx etc.), • Working knowledge of First Responder DAS systems, • Ability to read and interpret technical and architectural drawings, • Ability to read and interpret RF designs (e.g. iBwave), • Must be mechanically inclined and able to use both hand and power tools to perform assigned tasks, • Proficient in basic electronic and RF theory, and antenna types and uses, • Proficient in installation, termination, and testing of fiber systems and low voltage cabling systems, • Excellent computer skills, including high level of proficiency with Microsoft Office applications., • Strong focus on continuous process improvement; ability to develop and improve processes., • Ability to build and maintain productive internal and external stakeholder relationships., • Ability to defend technical recommendations., • A high degree of accuracy and attention to detail, • Strong time management and self-organization skills, • Ability to communicate information and ideas clearly and concisely, in writing and verbally, • Ability to actively listen and ask effective questions to accomplish tasks proficiently, • Ability to perform field work at indoor/outdoor venues, • Ability to travel frequently (80%+) Requirements Education and Experience Requirements High school diploma required; college degree preferred A minimum of 4 years of experience in the telecommunications industry Certificates, Licenses, and Registration Requirements: DAS OEM certification desired (e.g. SOLiD, Commscope, ADRF, Zinwave, Nextivity etc.) DAS Test Equipment certification desired (e.g. Solutelia, JDSU, PIM, Anritsu etc.) Cable Vendor certifications preferred (e.g. Andrew, RFS Cablewave, CommScope, Trilogy) Maintain a valid driver license with a driving record that does not exceed company guidelines to permit insurability under company insurance policy. OSHA certification preferred Physical Requirements • Frequent standing, walking, and occasional climbing, stooping, kneeling and reaching., • Must have the ability to stand and walk for long periods of time when working at customer sites and venues., • Occasional lifting and carrying of up to 50lbs., • Vision requires eyesight sufficiently strong enough to permit extended close work and normal color perception., • Hearing and speaking in order to exchange information., • Frequent travel including overnight stays or longer as required., • Willing to work days/nights/weekends depending on project demands. Work Environment Working conditions vary based on the customer site. Work may take place in new or old construction. Exposure to indoor and outdoor conditions with moderate to high noise levels. Exposure to mechanical, electrical, and/or other hazards. Work must comply with customer and/or company safety practices and OSHA requirements. Benefits • Attractive commission structure, • Health Care Plan (Medical, Dental & Vision), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Work From Home, • Wellness Resources