Trabajos electrical engineer en Chattanooga, TennesseeCrear alertas

USA-Project Manager I Location: Chattanooga, TN- 37409- Duration: Contract till May 2027 with possibility to extend Shift: 1st, -7-5 EST M-F Job Description: Position Overview The Project Engineer is responsible for providing project management, design engineering, and ad-hoc technical support of packaging and processing operations. They are responsible for all aspects of a project from development of costs and concepts to technical support after implementation. The Project Engineer will contribute towards site goals, objectives, strategies, and measures as they relate to capital, reliability, plant capability, cost, sustainability, and waste reduction. Essential Functions • Perform all aspects of project engineering including design, procurement, construction management, installation, and qualification. • Plan, establish budgets, develop complex schedules and coordinate resources to ensure delivery of scope, schedule, budget, and cash flow for all projects. • Drive results in Engineering metrics and own the following (KPIs): Budget Adherence %, Cash Flow Adherence %, Vertical Startup Adherence %, Critical Success Factor Adherence %, Projects Submitted, Projects Approved, CAPEX $ Spent vs Annual Budget. • Site liaison and team participant for projects that are being executed by non site-based engineering resources., • Champion Early Equipment Management (EEM) program including optimization, maintenance, retirement, and Startup Management (SUM). • Develops cost estimates and conceptual designs for new products, line extensions, and packaging operations., • Develop standards for equipment, systems, and engineering processes for assigned functional area and collaborate with other global technical teams. • Works with Operations and Maintenance teams to troubleshoot, modify, and improve packaging and processing equipment., • Collaborates with Department Managers to improve productivity through process changes, equipment replacement, or additional equipment. • Champion Safety objectives; strive for zero incidents and supports a people-centered safety culture within the maintenance and engineering teams. • Provide leadership and coaching to continuously improve the effectiveness of the technical function., • Strict adherence to Company and OSHA safety requirements, Standard Operating Procedures (SOP’s), Good Manufacturing Practices (GMP) Compliance, and Food and Drug Administration (FDA) regulatory standards. • Maintain compliance with all state and federal regulations., • Support reduction in environmental impacts across all sites, including energy savings and utility monitoring., • Establish and maintain constant communication across all levels of the organization. Education/Training o Bachelor’s degree in Engineering (Electrical, Mechanical, or Chemical) Preferred: o Project Management Professional Certification o Professional Engineer Certification Related Experience/Requirements: o 5+ years of project management, process design, manufacturing, and contractor supervision. o Must be well rounded with a solid grasp of many engineering disciplines as well as plant operations and construction. o Proven track record developing and executing major, complex projects (?*MM). o Experience with technical writing via establishing Work Instructions, SOPs, and OPLs o Mechanical aptitude & Critical Thinking Skills. o 2D/3D CAD experience (AutoCAD or Solidworks) and drawing development. o Ability to read and understand engineering drawings and technical documentation o Excellent written and oral communication skills; able to connect with all levels of the organization. o Expert planning, organization, and time management skills. o Required Competencies: Drive for Results, Action Orientation, Command Skills, Functional/Technical Skills, Priority Setting, Planning, Managing and Measuring Work, Process Management, Problem Solving, Decision Quality, Customer Focus, Integrity and Trust, Listening, Peer Relationships, Directing Others, and Comfort Around Higher Management o Experience in Food or Pharma manufacturing following FDA regulations is preferred. o Experience with site utilities, such as chillers, boilers, air compressors, etc is preferred.

Job Description Maintenance Technician Our Culture: We are a highly entrepreneurial company limited only by our imagination. Diversity and teamwork are major aspects of our culture. Our property associates are a highly team-focused group bringing out the uniqueness of each associate to provide great products and services. Success comes to those who continuously seek opportunities to learn and pass on new knowledge. We always strive to be better, never bored, and never complacent. Our teams thrive on hard work, inclusivity, and producing outstanding experiences. We endeavor to make our fellow associates feel comfortable and entrepreneurial so that they can engage unhindered. Finally, giving back to the community is also vital to our culture. Our properties live by the philosophy that they are an important part of their communities and look for ways to partner in the local community to make a difference. Job Description: A Maintenance Technician is responsible for maintaining the guest rooms, public space, and back of the house areas in good repair. A facility engineer is competent in various trades, including but not limited to carpentry, plumbing, electrical, air conditioning, painting, wall covering, and masonry, to ensure an attractive and well-maintained hotel. The person in this position must be able to roll their sleeves up and assist our teams when needed, living our “ONE TEAM. ONE VISION.” philosophy. This person must also provide innovative ways that align with our mission to be the best, most respected hotel company in America. The job is simple: Focus on ways to promote and engage in internal growth programs. Continuously exemplify and live by our Culture. Meet/exceed our company goals and three metrics. • Complete all required training, • Adhere to all standard operating procedures and property specific brand standards, • Perform any other duties as requested by management to aid in better operation of the hotel and service to the guests, • Have knowledge of fire alarm system and evacuation procedures, • Repair or replace items such as light bulbs, lamps, switches, outlets, faucets, toilets, hardware, filters, paint, furniture, wall coverings, caulking, grouting or other miscellaneous items, • Maintain a record of repairs performed, repairs calendared and pending, and repairs needing evaluation, • Inspect guestrooms, public space and back of the house to evaluate for areas to repair, touch up or replace, • Assist other department team members in the systematic application of the preventive maintenance program, • Have basic mechanical aptitude for the operation and repair of hotel facilities and equipment, • Have working knowledge of basic hand and power tools, • Is responsible for safety and security of guests, fellow associates, and hotel assets in conjunction with hotel management, • Will keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, associate issues, etc. Necessary Skills: • Able to communicate effectively in writing, by telephone and in person, • Able to report to scheduled shifts, • Able to work a flexible schedule. We are a 24/7 business which may require work availability of nights, weekends, and holidays, • Maintain a clean and attractive work area, uniform, and person, • Is organized, honest, and works well with others, • Can provide personalized, friendly service to every guest and associate, • Has the highest degree of integrity and is humble, living by the Golden Rule, • Able to work with people from diverse cultures and backgrounds, • Values of dedication, innovation, showing respect, being driven by excellence, being community-focused, and having a spirit of service., • Be able to bend, reach, kneel, push, and stretch and lift and/or carry up to 50 pounds, • Can perform work for 8 hours and work in a restrictive space/environment, • Must have eyesight enabling vision both near and far, • Must be comfortable using a step stool or ladder, • Must be able to use/lift arms for up to 8 hours, • Must be able to handle heat and stress, • Able to work in varying weather conditions such as heat, cold, rain, etc., • Have finger dexterity for operating equipment, • Must speak in a clear, understandable voice, hear at a basic level, and understand English, • Must be able to write Vision Hospitality Group is an equal opportunity/AA/Disability/Veteran employer. As an Equal Opportunity Employer, Vision Hospitality Group celebrates diversity and is committed to creating an equitable and inclusive environment and a sense of belonging for all associates. We do not discriminate and believe everybody should be proud of who they are, represent their culture and heritage, and live by the Golden Rule Vision Hospitality Group LLC, offers the following benefits: • Paid Time Off, • Optional Health, Wellness and Care benefits, • Health Reimbursement Program, • Flexible Spending Account, • Stay Discounts, • Optional Company paid Life Insurance, • 401(k) and 401(k) matching, • Employee Assistance Program, • Several Voluntary and Supplemental Insurance Options, • Select Paid Holidays and One Personal Floating Holiday, • Loyalty Incentives and Other Unique Incentive Programs

Job Description Maintenance Technician (Rotating Shifts - Full AND Part Time Available ) Our Culture: We are a highly entrepreneurial company limited only by our imagination. Diversity and teamwork are major aspects of our culture. Our property associates are a highly team-focused group bringing out the uniqueness of each associate to provide great products and services. Success comes to those who continuously seek opportunities to learn and pass on new knowledge. We always strive to be better, never bored, and never complacent. Our teams thrive on hard work, inclusivity, and producing outstanding experiences. We endeavor to make our fellow associates feel comfortable and entrepreneurial so that they can engage unhindered. Finally, giving back to the community is also vital to our culture. Our properties live by the philosophy that they are an important part of their communities and look for ways to partner in the local community to make a difference. Job Description: A Maintenance Technician is responsible for maintaining the guest rooms, public space, and back of the house areas in good repair. A facility engineer is competent in various trades, including but not limited to carpentry, plumbing, electrical, air conditioning, painting, wall covering, and masonry, to ensure an attractive and well-maintained hotel. The person in this position must be able to roll their sleeves up and assist our teams when needed, living our “ONE TEAM. ONE VISION.” philosophy. This person must also provide innovative ways that align with our mission to be the best, most respected hotel company in America. The job is simple: Focus on ways to promote and engage in internal growth programs. Continuously exemplify and live by our Culture. Meet/exceed our company goals and three metrics. • Complete all required training, • Adhere to all standard operating procedures and property specific brand standards, • Perform any other duties as requested by management to aid in better operation of the hotel and service to the guests, • Have knowledge of fire alarm system and evacuation procedures, • Repair or replace items such as light bulbs, lamps, switches, outlets, faucets, toilets, hardware, filters, paint, furniture, wall coverings, caulking, grouting or other miscellaneous items, • Maintain a record of repairs performed, repairs calendared and pending, and repairs needing evaluation, • Inspect guestrooms, public space and back of the house to evaluate for areas to repair, touch up or replace, • Assist other department team members in the systematic application of the preventive maintenance program, • Have basic mechanical aptitude for the operation and repair of hotel facilities and equipment, • Have working knowledge of basic hand and power tools, • Is responsible for safety and security of guests, fellow associates, and hotel assets in conjunction with hotel management, • Will keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, associate issues, etc. Necessary Skills: • Able to communicate effectively in writing, by telephone and in person, • Able to report to scheduled shifts, • Able to work a flexible schedule. We are a 24/7 business which may require work availability of nights, weekends, and holidays, • Maintain a clean and attractive work area, uniform, and person, • Is organized, honest, and works well with others, • Can provide personalized, friendly service to every guest and associate, • Has the highest degree of integrity and is humble, living by the Golden Rule, • Able to work with people from diverse cultures and backgrounds, • Values of dedication, innovation, showing respect, being driven by excellence, being community-focused, and having a spirit of service., • Be able to bend, reach, kneel, push, and stretch and lift and/or carry up to 50 pounds, • Can perform work for 8 hours and work in a restrictive space/environment, • Must have eyesight enabling vision both near and far, • Must be comfortable using a step stool or ladder, • Must be able to use/lift arms for up to 8 hours, • Must be able to handle heat and stress, • Able to work in varying weather conditions such as heat, cold, rain, etc., • Have finger dexterity for operating equipment, • Must speak in a clear, understandable voice, hear at a basic level, and understand English, • Must be able to write Vision Hospitality Group is an equal opportunity/AA/Disability/Veteran employer. As an Equal Opportunity Employer, Vision Hospitality Group celebrates diversity and is committed to creating an equitable and inclusive environment and a sense of belonging for all associates. We do not discriminate and believe everybody should be proud of who they are, represent their culture and heritage, and live by the Golden Rule. Vision Hospitality Group LLC, offers the following benefits: • Paid Time Off, • Optional Health, Wellness and Care benefits, • Health Reimbursement Program, • Flexible Spending Account, • Stay Discounts, • Optional Company paid Life Insurance, • 401(k) and 401(k) matching, • Employee Assistance Program, • Several Voluntary and Supplemental Insurance Options, • Select Paid Holidays and One Personal Floating Holiday, • Loyalty Incentives and Other Unique Incentive Programs

Job Description Maintenance Technician (Part Time - AM) Our Culture: We are a highly entrepreneurial company limited only by our imagination. Diversity and teamwork are major aspects of our culture. Our property associates are a highly team-focused group bringing out the uniqueness of each associate to provide great products and services. Success comes to those who continuously seek opportunities to learn and pass on new knowledge. We always strive to be better, never bored, and never complacent. Our teams thrive on hard work, inclusivity, and producing outstanding experiences. We endeavor to make our fellow associates feel comfortable and entrepreneurial so that they can engage unhindered. Finally, giving back to the community is also vital to our culture. Our properties live by the philosophy that they are an important part of their communities and look for ways to partner in the local community to make a difference. Job Description: A Maintenance Technician is responsible for maintaining the guest rooms, public space, and back of the house areas in good repair. A facility engineer is competent in various trades, including but not limited to carpentry, plumbing, electrical, air conditioning, painting, wall covering, and masonry, to ensure an attractive and well-maintained hotel. The person in this position must be able to roll their sleeves up and assist our teams when needed, living our “ONE TEAM. ONE VISION.” philosophy. This person must also provide innovative ways that align with our mission to be the best, most respected hotel company in America. The job is simple: Focus on ways to promote and engage in internal growth programs. Continuously exemplify and live by our Culture. Meet/exceed our company goals and three metrics. • Complete all required training, • Adhere to all standard operating procedures and property specific brand standards, • Perform any other duties as requested by management to aid in better operation of the hotel and service to the guests, • Have knowledge of fire alarm system and evacuation procedures, • Repair or replace items such as light bulbs, lamps, switches, outlets, faucets, toilets, hardware, filters, paint, furniture, wall coverings, caulking, grouting or other miscellaneous items, • Maintain a record of repairs performed, repairs calendared and pending, and repairs needing evaluation, • Inspect guestrooms, public space and back of the house to evaluate for areas to repair, touch up or replace, • Assist other department team members in the systematic application of the preventive maintenance program, • Have basic mechanical aptitude for the operation and repair of hotel facilities and equipment, • Have working knowledge of basic hand and power tools, • Is responsible for safety and security of guests, fellow associates, and hotel assets in conjunction with hotel management, • Will keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, associate issues, etc. Necessary Skills: • Able to communicate effectively in writing, by telephone and in person, • Able to report to scheduled shifts, • Able to work a flexible schedule. We are a 24/7 business which may require work availability of nights, weekends, and holidays, • Maintain a clean and attractive work area, uniform, and person, • Is organized, honest, and works well with others, • Can provide personalized, friendly service to every guest and associate, • Has the highest degree of integrity and is humble, living by the Golden Rule, • Able to work with people from diverse cultures and backgrounds, • Values of dedication, innovation, showing respect, being driven by excellence, being community-focused, and having a spirit of service., • Be able to bend, reach, kneel, push, and stretch and lift and/or carry up to 50 pounds, • Can perform work for 8 hours and work in a restrictive space/environment, • Must have eyesight enabling vision both near and far, • Must be comfortable using a step stool or ladder, • Must be able to use/lift arms for up to 8 hours, • Must be able to handle heat and stress, • Able to work in varying weather conditions such as heat, cold, rain, etc., • Have finger dexterity for operating equipment, • Must speak in a clear, understandable voice, hear at a basic level, and understand English, • Must be able to write Vision Hospitality Group is an equal opportunity/AA/Disability/Veteran employer. As an Equal Opportunity Employer, Vision Hospitality Group celebrates diversity and is committed to creating an equitable and inclusive environment and a sense of belonging for all associates. We do not discriminate and believe everybody should be proud of who they are, represent their culture and heritage, and live by the Golden Rule. Vision Hospitality Group LLC, offers the following benefits: • Paid Time Off, • Optional Health, Wellness and Care benefits, • Health Reimbursement Program, • Flexible Spending Account, • Stay Discounts, • Optional Company paid Life Insurance, • 401(k) and 401(k) matching, • Employee Assistance Program, • Several Voluntary and Supplemental Insurance Options, • Select Paid Holidays and One Personal Floating Holiday, • Loyalty Incentives and Other Unique Incentive Programs

Job Description The Hotel General Maintenance Technician is responsible for ensuring the proper operation of the hotel as a support role to the Chief Engineer. From plumbing and electrical systems to HVAC and pool maintenance, you assist with general facility upkeep. Reporting to the General Manager and Chief Engineer, you are expected to deliver high-quality work that minimizes disruption to guests. You bring experience in basic construction trades, including plumbing, electrical, carpentry, basic heating and air conditioning, swimming pool maintenance, painting, caulking, and related skills. Your role is to maintain a safe, well-kept property for both your team and guests while upholding McKibbon's Guiding Principles. A Day in the Life: Work independently and monitor the operations and functions of the interior and exterior areas of the property. Follow McKibbon Hospitality’s established guidelines to ensure the ongoing protection of company assets, associates, and guests. Promote enhanced guest satisfaction by offering professional and friendly interactions. Perform a variety of engineering and construction trade skills related to preventive maintenance and repairs in a timely and efficient manner. Interact with employees and guests and utilize proficient communication skills when communicating in any form. Help promote a collaborative, proactive, and interactive environment with other associates of the hotel. Follow all safety protocols when using tools and equipment and ensure they are stored in their designated areas in an organized and tidy manner. Embrace the McKibbon Guiding Principles: Think Bigger, Love Your Community, Do the Right Thing, Support Each Other, Make a Lasting Impression. Requirements: 3 years’ minimum experience in a maintenance-type position The ability to communicate operational activities, priorities, and problems with management engineers and supervisors. Knowledge of common causes of equipment malfunction. Ability to repair and replace basic heating and air conditioner systems. Skills necessary to perform basic painting and caulking skills. Ability to use standard hand tools (wrenches, pliers, screwdrivers, hammers, electricity measurements, etc.). Knowledge of preventative maintenance methods and techniques for maintaining equipment. Able to perform tests to check for normal operation of the hotel’s equipment. Knowledge of how to test pool and spa chemicals. Knowledge of how to handle fire equipment (hand-held extinguishers, fire hoses, etc.). Experienced expertise in the construction trades (highly desired). Previous hotel experience (highly desired). Ability to perform various maintenance tasks, which may include climbing stairs, walking 10,000 steps or more each day, utilizing power hand tools, and lifting up to 50 pounds. Must be able to kneel, stand, and work in varying indoor/outdoor conditions, and access high or confined spaces as needed. Ideal Skills & Qualities: Ability to identify potential maintenance concerns and take appropriate action with minimal supervision. Problem-solving skills. Able to determine what action should be taken in response to a customer complaint, comment, or inquiry. Knowledge and ability to identify the appropriate tools, parts, and equipment for use in performing a maintenance task. Why McKibbon? We believe in our Guiding Principles: Think Bigger. Love Your Community. Do the Right Thing. Support Each Other. Make a Lasting Impression. At McKibbon, you’ll join a supportive team that values your work and helps you grow. McKibbon is an Equal Opportunity Employer and consider all applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status under applicable law. Applicants must be at least 18 years of age, legally authorized to work in the United States, and able to successfully complete any required background screening as a condition of employment. Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Benefits: Full Time Associates: Comprehensive benefits package including medical, dental, and vision Life insurance Pet Insurance Short and long-term disability Paid time off and holidays Tuition assistance Financial & Occupational Wellness: All Associates Competitive Compensation with incentives (incentives vary by position) 401K Savings Plan, 50% matching up to 10% of compensation Associate referral program Brand and company training classes, workshops and conferences for career growth and development (varies by position) Personal Wellness: All Associates Fundraising matching funds program Team volunteer opportunities 24/7 chaplain services Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other protected characteristic in accordance with applicable federal, state, and local laws.

Job DescriptionDescription: Job Summary: Keeps every aspect of the property in good repair and safe working order. Maintains a high-quality level of work. Responds to the guest’s needs in a timely, efficient, friendly, and professional manner. Must be able to work Evenings and Weekends Duties/Responsibilities: • Ensure all work orders assigned are completed in a timely manner., • Adhere to all brand standards for maintenance and safety., • Knowledge of all life safety systems including fire alarm and evacuation procedures., • Tests and maintains water content of swimming pool and whirlpool in accordance with local and state requirements as directed., • Inspects, maintains, and cleans outside grounds, including parking lot, curbs, and landscaping., • Repair furniture and structures such as cabinets, tables, chairs, windows, bed frames, etc., • Does painting, touch-up painting, and finishing of furniture and building., • Checks electrical systems such as refrigerator controls, phone systems, televisions, lock systems, HVAC units and making repairs as necessary., • Checks and makes quality repairs on general plumbing systems such as pipelines, toilets, tubs, sinks, whirlpools, pools and drains., • Maintain a clean and attractive work area, uniform, and person., • Maintain and test all life safety systems as directed., • Must be responsible for security of guests, fellow employees and hotel assets., • Must be CPR certified, MSDS trained, and completed brand specific training program., • Must perform any other required duties as requested by the Chief Engineer, General Manager, and Manager on Duty to aid in better operation of the hotel, restaurant, lounge, and service to the guests., • Keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, employee issues, etc., • Communicates with guests in a friendly and courteous manner., • Does not make any purchases without purchase order approved by Chief Engineer and General Manager., • Immediately reports guest issues to Manager on Duty, • Always in proper uniform., • Never eats, drinks, or smokes in guest view. Required Skills/Abilities: • Have a valid driver’s license and dependable transportation available to pick up supplies., • Must possess general knowledge in carpentry, dry walling, painting, plumbing, roofing, and landscaping., • Must have an outgoing personality and deliver excellent customer service., • Must be able to work a flexible schedule including weekends, evenings and Holidays., • Must be dependable, honest and work well with others., • Must be able to troubleshoot and repair routine mechanical and plumbing malfunctions in hotel systems and equipment., • Must be willing and able to be responsive to complaints about maintenance., • Must have the ability to communicate in English. Self-starting personality with an even disposition., • Always maintain a professional appearance and manner. Can communicate well with guests. Must be willing to "pitch-in" and help co- workers with their job duties and be a team player., • Must be able to recognize potential safety hazards and security problems in the hotel and act upon each accordingly. Physical Requirements: • Stand/walk on feet for 8 hours and work in a restrictive space/environment., • Must have eyesight enabling vision both near and far., • Finger dexterity for operating machinery and hand tools, computer., • Must speak in a clear, understandable voice and hear at a basic level, and understand English., • Must be able to bend, stretch arms overhead and lift and/or carry up to 100 pounds. Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The company is an Equal Opportunity Employer and complies with ADA regulations as applicable. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. I have read and understand the job description as stated above and accept that any of the tasks may be modified or changed. I accept responsibility for knowing the modifications and/or changes in this job description. I can perform the essential functions of this job as listed above, with or without reasonable accommodation. Requirements:

Job Description Maintenance Technician Come join our team as we open this property, situated in beautiful Lookout Valley just 10 minutes from Chattanooga with one of Hilton’s most popular dual brands! Our Culture: We are a highly entrepreneurial company limited only by our imagination. Diversity and teamwork are major aspects of our culture. Our property associates are a highly team-focused group bringing out the uniqueness of each associate to provide great products and services. Success comes to those who continuously seek opportunities to learn and pass on new knowledge. We always strive to be better, never bored, and never complacent. Our teams thrive on hard work, inclusivity, and producing outstanding experiences. We endeavor to make our fellow associates feel comfortable and entrepreneurial so that they can engage unhindered. Finally, giving back to the community is also vital to our culture. Our properties live by the philosophy that they are an important part of their communities and look for ways to partner in the local community to make a difference. Job Description: A Maintenance Technician is responsible for maintaining the guest rooms, public space, and back of the house areas in good repair. A facility engineer is competent in various trades, including but not limited to carpentry, plumbing, electrical, air conditioning, painting, wall covering, and masonry, to ensure an attractive and well-maintained hotel. The person in this position must be able to roll their sleeves up and assist our teams when needed, living our “ONE TEAM. ONE VISION.” philosophy. This person must also provide innovative ways that align with our mission to be the best, most respected hotel company in America. The job is simple: Focus on ways to promote and engage in internal growth programs. Continuously exemplify and live by our Culture. Meet/exceed our company goals and three metrics. • Complete all required training, • Adhere to all standard operating procedures and property specific brand standards, • Perform any other duties as requested by management to aid in better operation of the hotel and service to the guests, • Have knowledge of fire alarm system and evacuation procedures, • Repair or replace items such as light bulbs, lamps, switches, outlets, faucets, toilets, hardware, filters, paint, furniture, wall coverings, caulking, grouting or other miscellaneous items, • Maintain a record of repairs performed, repairs calendared and pending, and repairs needing evaluation, • Inspect guestrooms, public space and back of the house to evaluate for areas to repair, touch up or replace, • Assist other department team members in the systematic application of the preventive maintenance program, • Have basic mechanical aptitude for the operation and repair of hotel facilities and equipment, • Have working knowledge of basic hand and power tools, • Is responsible for safety and security of guests, fellow associates, and hotel assets in conjunction with hotel management, • Will keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, associate issues, etc. Necessary Skills: • Able to communicate effectively in writing, by telephone and in person, • Able to report to scheduled shifts, • Able to work a flexible schedule. We are a 24/7 business which may require work availability of nights, weekends, and holidays, • Maintain a clean and attractive work area, uniform, and person, • Is organized, honest, and works well with others, • Can provide personalized, friendly service to every guest and associate, • Has the highest degree of integrity and is humble, living by the Golden Rule, • Able to work with people from diverse cultures and backgrounds, • Values of dedication, innovation, showing respect, being driven by excellence, being community-focused, and having a spirit of service., • Be able to bend, reach, kneel, push, and stretch and lift and/or carry up to 50 pounds, • Can perform work for 8 hours and work in a restrictive space/environment, • Must have eyesight enabling vision both near and far, • Must be comfortable using a step stool or ladder, • Must be able to use/lift arms for up to 8 hours, • Must be able to handle heat and stress, • Able to work in varying weather conditions such as heat, cold, rain, etc., • Have finger dexterity for operating equipment, • Must speak in a clear, understandable voice, hear at a basic level, and understand English, • Must be able to write Vision Hospitality Group is an equal opportunity/AA/Disability/Veteran employer. As an Equal Opportunity Employer, Vision Hospitality Group celebrates diversity and is committed to creating an equitable and inclusive environment and a sense of belonging for all associates. We do not discriminate and believe everybody should be proud of who they are, represent their culture and heritage, and live by the Golden Rule Vision Hospitality Group LLC, offers the following benefits: • Paid Time Off, • Optional Health, Wellness and Care benefits, • Health Reimbursement Program, • Flexible Spending Account, • Stay Discounts, • Optional Company paid Life Insurance, • 401(k) and 401(k) matching, • Employee Assistance Program, • Several Voluntary and Supplemental Insurance Options, • Select Paid Holidays and One Personal Floating Holiday, • Loyalty Incentives and Other Unique Incentive Programs

Job Description Maintenance Technician Our Culture: We are a highly entrepreneurial company limited only by our imagination. Diversity and teamwork are major aspects of our culture. Our property associates are a highly team-focused group bringing out the uniqueness of each associate to provide great products and services. Success comes to those who continuously seek opportunities to learn and pass on new knowledge. We always strive to be better, never bored, and never complacent. Our teams thrive on hard work, inclusivity, and producing outstanding experiences. We endeavor to make our fellow associates feel comfortable and entrepreneurial so that they can engage unhindered. Finally, giving back to the community is also vital to our culture. Our properties live by the philosophy that they are an important part of their communities and look for ways to partner in the local community to make a difference. Job Description: A Maintenance Technician is responsible for maintaining the guest rooms, public space, and back of the house areas in good repair. A facility engineer is competent in various trades, including but not limited to carpentry, plumbing, electrical, air conditioning, painting, wall covering, and masonry, to ensure an attractive and well-maintained hotel. The person in this position must be able to roll their sleeves up and assist our teams when needed, living our “ONE TEAM. ONE VISION.” philosophy. This person must also provide innovative ways that align with our mission to be the best, most respected hotel company in America. The job is simple: Focus on ways to promote and engage in internal growth programs. Continuously exemplify and live by our Culture. Meet/exceed our company goals and three metrics. • Complete all required training, • Adhere to all standard operating procedures and property specific brand standards, • Perform any other duties as requested by management to aid in better operation of the hotel and service to the guests, • Have knowledge of fire alarm system and evacuation procedures, • Repair or replace items such as light bulbs, lamps, switches, outlets, faucets, toilets, hardware, filters, paint, furniture, wall coverings, caulking, grouting or other miscellaneous items, • Maintain a record of repairs performed, repairs calendared and pending, and repairs needing evaluation, • Inspect guestrooms, public space and back of the house to evaluate for areas to repair, touch up or replace, • Assist other department team members in the systematic application of the preventive maintenance program, • Have basic mechanical aptitude for the operation and repair of hotel facilities and equipment, • Have working knowledge of basic hand and power tools, • Is responsible for safety and security of guests, fellow associates, and hotel assets in conjunction with hotel management, • Will keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, associate issues, etc. Necessary Skills: • Able to communicate effectively in writing, by telephone and in person, • Able to report to scheduled shifts, • Able to work a flexible schedule. We are a 24/7 business which may require work availability of nights, weekends, and holidays, • Maintain a clean and attractive work area, uniform, and person, • Is organized, honest, and works well with others, • Can provide personalized, friendly service to every guest and associate, • Has the highest degree of integrity and is humble, living by the Golden Rule, • Able to work with people from diverse cultures and backgrounds, • Values of dedication, innovation, showing respect, being driven by excellence, being community-focused, and having a spirit of service., • Be able to bend, reach, kneel, push, and stretch and lift and/or carry up to 50 pounds, • Can perform work for 8 hours and work in a restrictive space/environment, • Must have eyesight enabling vision both near and far, • Must be comfortable using a step stool or ladder, • Must be able to use/lift arms for up to 8 hours, • Must be able to handle heat and stress, • Able to work in varying weather conditions such as heat, cold, rain, etc., • Have finger dexterity for operating equipment, • Must speak in a clear, understandable voice, hear at a basic level, and understand English, • Must be able to write Vision Hospitality Group is an equal opportunity/AA/Disability/Veteran employer. As an Equal Opportunity Employer, Vision Hospitality Group celebrates diversity and is committed to creating an equitable and inclusive environment and a sense of belonging for all associates. We do not discriminate and believe everybody should be proud of who they are, represent their culture and heritage, and live by the Golden Rule Vision Hospitality Group LLC, offers the following benefits: • Paid Time Off, • Optional Health, Wellness and Care benefits, • Health Reimbursement Program, • Flexible Spending Account, • Stay Discounts, • Optional Company paid Life Insurance, • 401(k) and 401(k) matching, • Employee Assistance Program, • Several Voluntary and Supplemental Insurance Options, • Select Paid Holidays and One Personal Floating Holiday, • Loyalty Incentives and Other Unique Incentive Programs

Job Description Maintenance Technician Our Culture: We are a highly entrepreneurial company limited only by our imagination. Diversity and teamwork are major aspects of our culture. Our property associates are a highly team-focused group bringing out the uniqueness of each associate to provide great products and services. Success comes to those who continuously seek opportunities to learn and pass on new knowledge. We always strive to be better, never bored, and never complacent. Our teams thrive on hard work, inclusivity, and producing outstanding experiences. We endeavor to make our fellow associates feel comfortable and entrepreneurial so that they can engage unhindered. Finally, giving back to the community is also vital to our culture. Our properties live by the philosophy that they are an important part of their communities and look for ways to partner in the local community to make a difference. Job Description: A Maintenance Technician is responsible for maintaining the guest rooms, public space, and back of the house areas in good repair. A facility engineer is competent in various trades, including but not limited to carpentry, plumbing, electrical, air conditioning, painting, wall covering, and masonry, to ensure an attractive and well-maintained hotel. The person in this position must be able to roll their sleeves up and assist our teams when needed, living our “ONE TEAM. ONE VISION.” philosophy. This person must also provide innovative ways that align with our mission to be the best, most respected hotel company in America. The job is simple: Focus on ways to promote and engage in internal growth programs. Continuously exemplify and live by our Culture. Meet/exceed our company goals and three metrics. • Complete all required training, • Adhere to all standard operating procedures and property specific brand standards, • Perform any other duties as requested by management to aid in better operation of the hotel and service to the guests, • Have knowledge of fire alarm system and evacuation procedures, • Repair or replace items such as light bulbs, lamps, switches, outlets, faucets, toilets, hardware, filters, paint, furniture, wall coverings, caulking, grouting or other miscellaneous items, • Maintain a record of repairs performed, repairs calendared and pending, and repairs needing evaluation, • Inspect guestrooms, public space and back of the house to evaluate for areas to repair, touch up or replace, • Assist other department team members in the systematic application of the preventive maintenance program, • Have basic mechanical aptitude for the operation and repair of hotel facilities and equipment, • Have working knowledge of basic hand and power tools, • Is responsible for safety and security of guests, fellow associates, and hotel assets in conjunction with hotel management, • Will keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, associate issues, etc. Necessary Skills: • Able to communicate effectively in writing, by telephone and in person, • Able to report to scheduled shifts, • Able to work a flexible schedule. We are a 24/7 business which may require work availability of nights, weekends, and holidays, • Maintain a clean and attractive work area, uniform, and person, • Is organized, honest, and works well with others, • Can provide personalized, friendly service to every guest and associate, • Has the highest degree of integrity and is humble, living by the Golden Rule, • Able to work with people from diverse cultures and backgrounds, • Values of dedication, innovation, showing respect, being driven by excellence, being community-focused, and having a spirit of service., • Be able to bend, reach, kneel, push, and stretch and lift and/or carry up to 50 pounds, • Can perform work for 8 hours and work in a restrictive space/environment, • Must have eyesight enabling vision both near and far, • Must be comfortable using a step stool or ladder, • Must be able to use/lift arms for up to 8 hours, • Must be able to handle heat and stress, • Able to work in varying weather conditions such as heat, cold, rain, etc., • Have finger dexterity for operating equipment, • Must speak in a clear, understandable voice, hear at a basic level, and understand English, • Must be able to write Vision Hospitality Group is an equal opportunity/AA/Disability/Veteran employer. As an Equal Opportunity Employer, Vision Hospitality Group celebrates diversity and is committed to creating an equitable and inclusive environment and a sense of belonging for all associates. We do not discriminate and believe everybody should be proud of who they are, represent their culture and heritage, and live by the Golden Rule. Vision Hospitality Group LLC, offers the following benefits: • Paid Time Off, • Optional Health, Wellness and Care benefits, • Health Reimbursement Program, • Flexible Spending Account, • Stay Discounts, • Optional Company paid Life Insurance, • 401(k) and 401(k) matching, • Employee Assistance Program, • Several Voluntary and Supplemental Insurance Options, • Select Paid Holidays and One Personal Floating Holiday, • Loyalty Incentives and Other Unique Incentive Programs

Job DescriptionDescription: Job Title: Maintenance Technician / Engineer Department: Maintenance / Engineering Reports to: Chief Engineer Status: Non-Exempt / Hourly Job Summary: Keeps every aspect of the property in good repair and safe working order. Maintains a high-quality level of work. Responds to the guest’s needs in a timely, efficient, friendly, and professional manner. Duties/Responsibilities: • Ensure all work orders assigned are completed in a timely manner., • Adhere to all brand standards for maintenance and safety., • Knowledge of all life safety systems including fire alarm and evacuation procedures., • Tests and maintains water content of swimming pool and whirlpool in accordance with local and state requirements as directed., • Inspects, maintains, and cleans outside grounds, including parking lot, curbs, and landscaping., • Repair furniture and structures such as cabinets, tables, chairs, windows, bed frames, etc., • Does painting, touch-up painting, and finishing of furniture and building., • Checks electrical systems such as refrigerator controls, phone systems, televisions, lock systems, HVAC units and making repairs as necessary., • Checks and makes quality repairs on general plumbing systems such as pipelines, toilets, tubs, sinks, whirlpools, pools and drains., • Maintain a clean and attractive work area, uniform, and person., • Maintain and test all life safety systems as directed., • Must be responsible for security of guests, fellow employees and hotel assets., • Must be CPR certified, MSDS trained, and completed brand specific training program., • Must perform any other required duties as requested by the Chief Engineer, General Manager, and Manager on Duty to aid in better operation of the hotel, restaurant, lounge, and service to the guests., • Keep confidential the business functions of the company including, but not limited to, financial status, customer/guest information, employee issues, etc., • Communicates with guests in a friendly and courteous manner., • Does not make any purchases without purchase order approved by Chief Engineer and General Manager., • Immediately reports guest issues to Manager on Duty, • Always in proper uniform., • Never eats, drinks, or smokes in guest view. Required Skills/Abilities: • Have a valid driver’s license and dependable transportation available to pick up supplies., • Must possess general knowledge in carpentry, dry walling, painting, plumbing, roofing, and landscaping., • Must have an outgoing personality and deliver excellent customer service., • Must be able to work a flexible schedule including weekends, evenings and Holidays., • Must be dependable, honest and work well with others., • Must be able to troubleshoot and repair routine mechanical and plumbing malfunctions in hotel systems and equipment., • Must be willing and able to be responsive to complaints about maintenance., • Must have the ability to communicate in English. Self-starting personality with an even disposition., • Always maintain a professional appearance and manner. Can communicate well with guests. Must be willing to "pitch-in" and help co- workers with their job duties and be a team player., • Must be able to recognize potential safety hazards and security problems in the hotel and act upon each accordingly. Education and Experience: • None. Supervisory Responsibilities: • None. Physical Requirements: • Stand/walk on feet for 8 hours and work in a restrictive space/environment., • Must have eyesight enabling vision both near and far., • Finger dexterity for operating machinery and hand tools, computer., • Must speak in a clear, understandable voice and hear at a basic level, and understand English., • Must be able to bend, stretch arms overhead and lift and/or carry up to 100 pounds. Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The company is an Equal Opportunity Employer and complies with ADA regulations as applicable. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. I have read and understand the job description as stated above and accept that any of the tasks may be modified or changed. I accept responsibility for knowing the modifications and/or changes in this job description. I can perform the essential functions of this job as listed above, with or without reasonable accommodation. Requirements:

Job Description EXPERIENCED PROFESSIONAL CIVIL ENGINEER FULLY TRAINED AND COMPETENT TO ENSURE HIGH PRODUCTIVITY IN ALL CONVENTIONAL ASPECTS AND FUNCTIONS OF CIVIL, STRUCTURAL, OR TRANSMISSION LINE ENGINEERING. PLANS, SCHEDULES, CONDUCTS, COORDINATES, AND DIRECTS DETAILED PROJECTS OF MODERATE SCOPE OR PART OF A MAJOR PROJECT. WORK REQUIRES SOUND JUDGMENT AND A BROAD KNOWLEDGE OF STANDARDS AND PRECEDENTS IN CIVIL, STRUCTURAL, AND LINE ENGINEERING ALONG WITH KNOWLEDGE OF THE ELECTRICAL ENGINEERING ASPECTS OF TRANSMISSION LINE ENGINEERING. Education: BS or MS degree in Civil Engineering from an accredited institution. Licensed Professional Engineer desirable. Membership in professional/technical societies is desirable. Demonstrated experience with electronic spreadsheets, standard structural engineering software, line engineering software and computer aided drafting software. Incumbent may be required to be medically qualified and willing to work in the field and climb structures as needed. Company DescriptionJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. \r\n\r\nJSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. \r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description About the Role Insight Global is seeking a Senior Electronic Controls Engineer to lead the architectural design and lifecycle management of industrial machine platforms. As an OEM, this team builds systems from the ground up—you will own the “brain” behind the machines, ensuring high-performance control systems, data integrity, and long-term reliability. This role is ideal for someone with strong motion control and system architecture experience who enjoys designing and optimizing control systems from scratch. Key Responsibilities • Control System Development: Design and program control code for new machine features, platform upgrades, and system improvements, • Hardware Ownership: Select, validate, and manage next-generation hardware (controllers, motors, actuators); oversee full electronics lifecycle including obsolescence planning, • R&D & Innovation: Lead research and development initiatives focused on automation and new machine platforms, • Commissioning & Support: Act as the escalation point for complex system issues and support field service teams Current Projects • Leading a full control system redesign across machine platforms, • Refining and standardizing a scalable control architecture, • Partnering with Siemens to build a next-generation machine platform from the ground up, • Driving improvements in performance metrics including speed, reliability, and data integrity Required Qualifications • Bachelor’s Degree in Electrical Engineering or Computer Engineering (controls/automation focus preferred), • 8+ years of experience designing, developing, and commissioning industrial electrical/control systems, • Strong expertise in:, • Closed-loop control systems, • Real-time / embedded controls, • End-to-end control system architecture, • Industrial networks (PROFINET, EtherCAT, CANopen), • Experience with hardware selection (controllers, motors, actuators) and motion control systems

Job Description RFA Engineering (www.rfamec.com) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking a growth-oriented candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Mechanical Design Engineer - Hydraulics We are seeking a Mechanical Design Engineer with a focus on hydraulic systems to support product design and integration. This role involves working closely with suppliers, customers, and cross-functional teams to develop efficient, cost-effective solutions. Key responsibilities include 3D modeling, creating 2D drawings, supporting assembly line challenges, and troubleshooting hydraulic systems. Responsibilities • Communication with suppliers and customers on product selection and integration, • Use of SolidWorks to support 3-D Modeling of components, sheet metal and hydraulic or electrical routings., • Creation and support of 2D drawings and specification documentation, • Work with manufacturing, quality, product verification and validation, customer support and suppliers to develop efficient and cost-effective designs, • Support Assembly Line challenges, • Using Hydraulic Schematics to troubleshoot and validate system function., • Compile and furnish necessary information (engineering decisions and reports of pertinent design analyses data) to document the design solution required for building of prototypes and adoption of the design with possible involvement of other functional engineers., • Provide hands-on support during prototype builds, including coordination with suppliers, troubleshooting assembly and integration issues, and validating component fit and function. Requirements • Bachelor's of Science in Mechanical, Electrical, Aerospace, or Agricultural Engineering or related degree, • Minimum 3 years of demonstrated experience working with hydraulic components or systems, • Experience in 3-D Modeling Software; SolidWorks (Preferred), • Strong mechanical and electrical aptitude demonstrated through work experience or hobbies, • Excellent communication both written and verbal, • Demonstrated ability to meet deadlines and commitments, • Strong analytical, problem solving and troubleshooting skills, • Ability to thrive in a team environment Desired Attributes • Previous experience with PDM software (Windchill, PDMLink or Similar), • Strong understanding of GD&T, • Design experience with off-road mobile equipment, • Ability to address quality issues, determine root cause and drive to a corrective action, • Desire to work in an engineering environment focusing on robust & cost effective designs, • Experience operating off-road mobile equipment Visa sponsorship is NOT available for this position. Pay Range: $75,000-$100,000 – Commensurate with experience About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits • Health and Dental Insurance, • TelaDoc Healthiest You, • Supplemental Vision Insurance, • Company Paid Life Insurance, • Company Paid Long-Term Disability, • Short-term Disability, • Retirement Savings Account (Traditional 401k & Roth 401k), • Flexible Spending Plan Dependent Care, • HSA for Medical Expenses, • Bonus Plan (Exempt Employees Only), • Paid Time Off (PTO), • Paid Holidays, • Bereavement Leave, • Employee Assistance Programs (EAP), • Education Assistance Equal Opportunity and Veteran Friendly

Job DescriptionDescription: PRIMARY FUNCTION: The Manufacturing Engineer is responsible for developing, evaluating, and improving manufacturing methods to achieve improved quality, product cost, and manufacturing efficiency. This position applies knowledge of design, materials/components, fabrication, welding and paint processes, tooling and production equipment capabilities, assembly methods and quality standards. RESPONSIBILITIES: Candidate will use skills acquired through formal training/education to execute the following and related tasks in support of product development and management responsibilities. • Create and improve upon production standard work practices for the equipment assembly department, • Lead troubleshooting of mechanical, electrical, or hydraulic issues on Sherman+Reilly product within the production environment, • Support engineering team with new product introductions into the production environment, • Design and develop equipment, processes, and shop layout for maximum efficiency and flow., • Partner with quality department and shop floor in quality improvements through root cause analysis and problem resolution., • Recommend ways to reduce product costs and improve functionality. Actively work with design engineers and product line teams to implement design and manufacturing changes., • Ensure all changes are made consistent with ergonomic and other safety standards., • Train employees as needed., • Other duties may be assigned.Requirements: QUALIFICATIONS: Bachelor’s degree in Manufacturing Engineering or an equivalent field of Engineering. 3-5 years of experience within a manufacturing environment Experience or education in electrical or hydraulic system troubleshooting required Hydraulics, Pneumatics, or Electrical Systems certifications preferred Ability to read electrical and hydraulic system schematics Ability to read and understand design drawings with geometric dimensioning and tolerance (GD&T). Strong computer skills (Excel, Word, CAD software, SolidWorks, ERP/MRP system). Effective communication/interpersonal skills are required. PHYSICAL: This position may exert up to 35 pounds of force occasionally with assistance, and/or up to 10 pounds of force frequently as well as the use of arm and/or leg controls with exertion greater than that of sedentary work. May also push, pull, lift, carry, grasp, finger or otherwise move objects Normally assigned to a production environment Uses computer terminal frequently; interfaces with other employees and outside visitors by e-mail, telephone, mail and/or in person. Is required to wear safety glasses, ear protection, and safety shoes within the factory environment. Must be able to climb onto and under mobile equipment to access mechanical and electrical components. Notice to Recruiting Agencies: Sherman + Reilly does not accept unsolicited resumes or inquiries from staffing or recruiting agencies. We will not review, respond to, or return cold calls or unsolicited outreach. Any resumes submitted without a signed agreement in place will be considered the property of Sherman + Reilly and will not be subject to any placement fees.

Job Description ⚡ Electrical Engineer — A/E Design & Construction Location: New York, NY | Full-Time | Hybrid Are you an Electrical Engineer who thrives on complex, high-impact projects in a fast-paced A/E environment? Join a dynamic team in New York City where you’ll play a key role in delivering innovative electrical designs from concept through construction. This is an exciting opportunity to work alongside top architects, engineers, and consultants on technically challenging projects while growing your career in one of the most competitive markets in the country. What You’ll Do • Support electrical design and development from concept through construction, • Prepare construction documents including drawings, specifications, addenda, and bulletins, • Attend and actively participate in design and construction meetings, • Review and respond to RFIs, submittals, and contractor inquiries, • Perform field visits for surveys, construction observations, and punch lists, • Conduct engineering calculations, including load calculations and equipment sizing, • Coordinate with multidisciplinary teams to ensure seamless project execution What You Bring Education & Credentials • Bachelor’s or Master’s Degree in Engineering (accredited program required), • EIT or PE License preferred, • LEED Certification a plus Experience • Recent experience with technically complex A/E projects, • Strong understanding of multi-discipline coordination, • Field experience with knowledge of construction methods and best practices, • Ability to manage multiple projects and deadlines with precision Technical Skills • Proficiency in:, • AutoCAD MEP 3D, Revit MEP, Navisworks, • Microsoft Office (Word, Excel, PowerPoint, Outlook), • Bluebeam Revu, Procore, Prolog (or similar project management tools) Code Knowledge • Familiarity with:, • NYC Building, Mechanical, Energy Conservation & Fire Codes, • National and International Codes (NEC, NFPA, etc.) What Sets You Apart • Strong communication skills—both written and verbal, • Detail-oriented with a commitment to quality and deadlines, • Team player who collaborates effectively with architects, engineers, and clients, • Ability to provide client references demonstrating past performance Why Join This Team • Work on high-profile NYC projects, • Collaborate with top-tier A/E professionals, • Gain exposure to complex, large-scale developments, • Strong opportunity for career advancement and technical growth Apply Today If you're ready to take your career to the next level and contribute to impactful projects across New York City, apply now and bring your expertise to a team that values innovation, precision, and collaboration.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company specializing in asphalt road building and aggregate processing equipment. Our mission is to design and build the most innovative products for the industries we serve. Our Controls Engineering team is at the heart of that mission — developing the electrical systems that power our machines around the world. ABOUT THE POSITION We are looking for a motivated, detail-oriented Electrical Engineer to join our Controls team. In this role, you will design and develop electrical control panels and systems for heavy off-road construction equipment. You will work within an established engineering team, learning our products and processes while contributing to real, production-level designs from day one. Recent graduates with a four-year Electrical Engineering degree are strongly encouraged to apply. Key Deliverables Design clear, efficient, and repeatable electrical schematics using EPLAN Electric P8 Develop panel layout drawings and produce accurate, build-ready documentation packages Select and specify electrical components (breakers, relays, PLCs, terminal blocks, wiring, etc.) to meet design requirements Continuously improve existing schematic standards and panel design processes for consistency and manufacturability Deliver accurate documentation and design files on schedule Key Activities & Responsibilities Use EPLAN Electric P8 to create and maintain electrical schematics, panel layouts, and wiring diagrams from concept through production release Design electrical control panels for 24VDC & 120VAC for industrial applications, including component selection, enclosure layout, and thermal management Develop and maintain bill of materials (BOM) and part specifications in coordination with the Purchasing Department and approved suppliers Work closely with the Controls, Mechanical, and Manufacturing teams to ensure designs are practical, cost-effective, and repeatable on the shop floor Support Manufacturing during production by clarifying design intent and resolving build issues Participate in design reviews and contribute to the development of internal schematic and documentation standards Assist the Service Department in diagnosing and resolving field and warranty issues related to electrical systems Stay current with Astec product lines and relevant industry standards (e.g., UL, NFPA 79, IEC) Document work thoroughly and maintain organized project files Follow all company safety policies and procedures at all times Perform other duties as assigned To Be Successful in This Role Bachelor's Degree in Electrical Engineering or Electrical/Electronic Technology required 0–2 years of experience; recent graduates are encouraged to apply Proficiency with Microsoft Office Suite required Experience with or exposure to EPLAN Electric P8 preferred Ability to read and interpret electrical schematics and engineering drawings Familiarity with 24VDC & 120VAC control circuits and panel wiring practices a plus Experience with PLC programming & hands on troubleshooting is a plus Strong attention to detail and a desire to build clean, well-organized, repeatable work products Good communicator, able to work across engineering, manufacturing, and purchasing teams Our Culture and Values Employees who become part of Astec embody the following values throughout their work: Continuous devotion to meeting the needs of our customers Honesty and integrity in all aspects of business Respect for all individuals Preserving entrepreneurial spirit and innovation Safety, quality, and productivity as means to ensure success Work Environment This role operates in both an office and a shop manufacturing environment. Shop exposure includes moving mechanical parts, machinery, electrical equipment, and varying temperatures and noise levels. Hearing protection and other personal protective equipment may be required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal Opportunity Employer As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, veteran status, or any other characteristic protected by law or executive order.

Job DescriptionDescription: The Manufacturing Engineer is responsible for developing, evaluating, and improving manufacturing methods to achieve improved quality, product cost, and manufacturing efficiency. This position applies knowledge of design, materials/components, fabrication, welding and paint processes, tooling and production equipment capabilities, assembly methods and quality standards. This position is part of a cross functional team with their main purpose being the support of new product development prototypes in the heavy equipment industry. The role works closely with the design engineering team to ensure new designs are safe, cost effective, and match production capability strengths while working with the production and supply chain teams to ensure prototype procurement of project components meets project deadlines. Requirements: Candidate will use skills acquired through formal training/education to execute the following and related tasks in support of product development and management responsibilities. • Provide Design for Manufacturing and Assembly guidance for the new product development project teams, • Coordinate with engineers, project managers, production team, and supply chain members to ensure prototype part procurement decisions match vendor capabilities and project timelines, • Ensure new products can be built safely within facility capabilities or provide recommendations for additional facility requirements based on new designs requirements, • Coordinate with production planning on expedited prototype parts through on site manufacturing facility, • Recommend ways to reduce product costs and improve functionality. Actively work with design engineers and product line teams to implement design and manufacturing changes., • Partner with quality department and shop floor in quality improvements through root cause analysis and problem resolution., • Ensure all changes are made consistent with ergonomic and other safety standards., • Manage production bills of material and support material requirement planning systems, • Train employees as needed., • Other duties may be assigned. QUALIFICATIONS: • Bachelor’s degree in Mechanical / Manufacturing / Industrial Engineering or an equivalent field of Engineering., • 3-5 years of experience within a manufacturing environment, • Experience or education in electrical or hydraulic system troubleshooting preferred, • Experience with sheet metal fabrication and CNC machining preferred, • Experience with welding science and best practices preferred, • Experience with MS project or similar project planning software preferred, • Experience with ERP material and routing setup preferred, • Ability to read and understand design drawings with geometric dimensioning and tolerance (GD&T)., • Strong computer skills (Excel, Word, CAD software, SolidWorks, ERP/MRP system)., • Effective communication/interpersonal skills are required. PHYSICAL: • This position may exert up to 35 pounds of force occasionally with assistance, and/or up to 10 pounds of force frequently as well as the use of arm and/or leg controls with exertion greater than that of sedentary work. May also push, pull, lift, carry, grasp, finger or otherwise move objects, • Normally assigned to an office environment; will be required to work a substantial amount of time in the factory environment., • Uses computer terminal frequently; interfaces with other employees and outside visitors by e-mail, telephone, mail and/or in person., • Is required to wear safety glasses, ear protection, and safety shoes within the factory environment., • Must be able to climb onto and under mobile equipment to access mechanical and electrical components. Notice to Recruiting Agencies: Sherman + Reilly does not accept unsolicited resumes or inquiries from staffing or recruiting agencies. We will not review, respond to, or return cold calls or unsolicited outreach. Any resumes submitted without a signed agreement in place will be considered the property of Sherman + Reilly and will not be subject to any placement fees.

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Assemble, test, and quality check retrofit control panels for Astec's MINDS and PM3 automation systems. This role builds control panels from start to finish, taking ownership of the complete assembly process from backplate preparation through final testing and documentation. Key Deliverables · Layout and build retrofit control panels from backplate preparation through final assembly · Test and troubleshoot completed panels to verify functionality before shipment · Conduct quality control checks including continuity testing, I/O verification, and photo documentation · Identify and communicate drawing discrepancies to supervisor or Project Engineer for resolution Key Activities & Responsibilities · Pull appropriate parts from staged kits to build control panels · Mount DIN rail, wire duct, and components per electrical drawings · Assemble cables and boards · Complete wiring and labeling per drawing specifications · Document completed work with photos per QC standards · Must have a basic understanding of electrical circuits and the ability to read and comprehend blueprints · Participate in panel integration testing when required · Support continuous improvement initiatives for build processes · Follow company policies and procedures at all times · Follow proper safety rules and procedures at all times · Perform other duties as assigned To be successful in this role, your experience and competencies are: · Minimum high school diploma or equivalent certification required - trade or vocational school, preferred · Electrical related associate degree is preferred · Basic understanding of electrical circuits is required · Must have the ability to read and comprehend electrical drawings · Must be able to work satisfactorily as a team member Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Controls Center Manufacturing Facility While performing the duties of this job, the employee works in a light manufacturing/assembly environment. Work involves standing, walking, and using hand tools and test equipment. The employee may be exposed to electrical components and test voltages. The noise level is generally moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description PDS 8 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Mesa seeks an experienced Relay Settings Engineer that is looking to further their career in the electric power industry. This position is for our Power Delivery Substation group which supports various clients across the United States. What We’re Looking for • Engineer with a bachelor’s degree in electrical engineering (ABET Accredited), preferably a master’s degree with an emphasis in Power Systems., • 6+ Years Engineering experience, • Fast learner – You can pick up new concepts, standards, and software quickly., • Self-starter – You’ll get direction from senior engineers, but you’re comfortable hunting down answers on your own when the path isn’t obvious., • Detail Oriented – You are capable of ensuring all the details necessary to complete a task are addressed properly., • Solid understanding of fundamentals – Ohm’s law, single-phase systems, three-phase power systems, and digital logic., • Clear communicator – You feel comfortable reaching out to others with questions and can communicate professionally face-to-face, on the phone, and over email., • Professional Engineering licensure., • Experience with Design Software – Aspen Oneliner, SEL AcSELerator, AutoCAD/MicroStation, Bluebeam Revu, Microsoft Excel, etc., • Experience Protection Schemes– Including overcurrent, differential, distance protection, and pilot protection schemes., • Experience with Relay Settings – including development of relay settings files including logic What You’ll Learn • Project ownership - The process for leading a project’s design from concept to close-out; aiming for schedule and cost targets., • Leadership - Guiding junior engineers on drafting standards, calculation methods, and best-practice workflows., • Professional communication - Presenting design rationale and progress updates to clients, senior management, and cross-functional teams. What You’ll Do • Work on a team of drafters, designers, and engineers, • Create conceptual protection scheme drawings, • Perform relay coordination studies, • Create relay settings files, • Coordinate with other engineering disciplines, • Maintain quality assurance standards by completing client and internal checklists, • Perform peer-review of designs, • Supervise less experienced engineers or technical support personnel on an assignment basis What You’ll Earn • Paid Time Off, • Holiday Pay – 10 Days Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings plan, • 401(K) Matching Contribution, • Section 125/Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Option Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description GIG Nuclear / Generation Industrial & Government This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates, Inc. is a woman/minority-owned full service engineering, procurement, & construction management firm covering power, defense, aerospace, industrial, commercial and municipal entities. We specialize in power generation and delivery services including electrical high-voltage, substations, switchyard, transmission line, & distribution design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! Mesa' strategic growth strategy for our commercial nuclear division is to leverage part-time engineering expertise to create a ready service pool of available staff to support client projects in nuclear generation. This position is a Nuclear I&C Digital Design and Cyber Security Engineer. The successful candidate will support development of design deliverables associated with digital I&C design changes for commercial nuclear plants. Candidate will provide equal support in Cyber Security and Digital Modifications to meet the need or nuclear clients, those whose experience is mainly Cyber Security, Digital, or Plant Modifications will be considered. The preferred candidate will have experience with Digital Modifications and Cyber Security upgrades at commercial nuclear stations. Responsibilities include performing a broad range of Digital I&C design activities to support development of design change documentation, including modification of system requirements, system network architecture, control logic, and HMI. Understanding cyber security implications surrounding the overall architecture of plant networks, operating systems, hardware platforms, plant specific applications, and the services and protocols upon which these applications relay. Ability to generate cyber assessments and component classification in accordance with 10CFR73.54 and NEI 08-09 and ensuring the classification of critical digital assets are documented prior to being presented to client Cyber Security Assessment Teams for review and approval. Responsibilities may include being a technical point of contact with the customer, leading integrated engineering teams, and providing area expertise in development of industry standard design and calculations associated with design and construction of commercial nuclear modifications. Typical duties will include leading engineering teams in the development and issuance of design deliverables associated with defined scopes of work, mentoring engineering staff in the intricacies of commercial nuclear design, making design presentations to client representatives, completing design checks and/or independent verifications of deliverables, supporting the Project Manager with monitoring and control of project performance, and supporting the bid and estimation process if requested. This position will coordinate, plan, and execute engineering activities with little oversight associated with design, procurement, and construction phase services on commercial nuclear projects in accordance with customer and Mesa processes and procedures. A strong background in commercial nuclear design and developing engineering competencies is required. Requirements: • Must be proficient in preparation of engineering change packages (EC’s), with knowledge of Standard Design Process, • Knowledgeable of Industry Standard Digital Design Engineering NISP-EN-04 is required., • BS degree from an accredited university – electrical, computer, or related field., • MS or other advanced degree in engineering is preferred., • Minimum 8 years experience in design of modifications in commercial nuclear plants., • Must be able to demonstrate adaptability; must be proficient in identifying, troubleshooting, and resolving issues within a nuclear power plant environment., • Experience working with multiple nuclear clients and vendors is desirable., • Must be able to obtain unescorted access at an operating or construction nuclear plant., • Position requires excellent communication skills and ability to interface with customers and internal team members under a matrixed organization., • Experience with Industry Standard Design Procedure IP-ENG-001 is highly desirable., • Position must sit in our Chattanooga office (relocation assistance offered) and must be able to travel to plant sites when needed (approx. 6-8 days/month when working on an active project). Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 10 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Responsibilities • Works with program managers, project managers, and engineering manager to ensure resources are optimally place on projects., • Works with project managers to identify methods to improve project execution, work processes, and procedures to continually improve quality, productivity, and efficiency., • Proactively supervises staff by coordinating design tasks with project managers, project engineers, and project leads., • Ensures staff stay on task and perform duties within allotted timeframes., • Performs technical oversight and coordinates checking/reviews of deliverables and other project documents., • Responsible for the development and training of engineers, designers, and drafters within the group., • Conduct’s group meetings with staff as needed to communicate department and company objectives., • Approves timesheets and authorizes overtime and vacation. May also approve expense reports. Expectations • Maintains a collaborative environment within the group, ensuring all team members are contributing to the group’s success., • Demonstrates excellent communication and leadership skills., • Good interpersonal skills, able to build relationships and select team members for specific projects based on skill sets of individual staff members., • Is well organized and is well-versed in the design capabilities/limitations of all design team members with the group., • Creates an environment conducive to efficient workflow., • Shows initiative by taking on additional work responsibilities when the department or group is overloaded., • Establishes, promotes, and assures quality on all projects and work performed by the group., • Promotes a strong safety culture within the group and ensures staff incorporates safe work practices into all activities., • Candidate must be willing and able to report to office in either Knoxville, Chattanooga, or Lakewood twice a week. Qualifications • 4+ years experience in substation/utility design, with at least 2+ in protection and controls design., • Minimum bachelor’s degree in electrical engineering or related field., • Previous management experience is preferred, but not required., • Licensed professional engineer is highly preferred, but not required. Benefits • Paid Time Off, • Holiday Pay – 10 Days Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings plan, • 401(K) Matching Contribution, • Section 125/Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Option, • FSA and HSA Options Annual Salary Range $88,590.00 - $100,800.00 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description BUILT TO CONNECT At Astec, we believe in the power of connection and the importance of building long-lasting relationships with our employees, customers and the communities we call home. With a team more than 4,000 strong, our employees are our #1 advantage. We invest in skills training and provide opportunities for career development to help you grow along with the business. We offer programs that support physical safety, as well as benefits and resources to enhance total health and wellbeing, so you can be your best at work and at home. Our equipment is used to build the roads and infrastructure that connects us to each other and to the goods and services we use. We are an industry leader known for delivering innovative solutions that create value for our customers. As our industry evolves, we are using new technology and data like never before. We’re looking for creative problem solvers to build the future with us. Connect with us today and build your career at Astec. LOCATION Chattanooga, TN On-site ABOUT THE POSITION The Senior Electrical Engineer, Smart Services will contribute to the development of engineering capabilities that support Astec’s Smart Services platform. This role centers on electrical engineering for condition monitoring hardware, equipment telematics, and automated inspection technologies. There will be an emphasis on building solutions that can scale across many product lines and applications. The role works closely with the Astec Digital organization and partners with Electrical Engineering at multiple Astec sites to ensure solutions are technically sound, scalable, and aligned with broader platform objectives. DELIVERABLES & RESPONSIBILITIES · Design and integrate electrical systems for condition monitoring sensors, networking and telematics hardware, and inspection robotics. · Partner closely with the Director of Smart Services to develop scalable, platform‑aligned technical solutions. · Collaborate with Controls and Electrical Engineering teams to align Smart Services solutions with enterprise standards and architectures. · Write and maintain production‑quality code (e.g., Python, C/C++, or similar) for automation, diagnostics, data handling, or embedded/edge workflows. · Evaluate, select, and integrate sensors, edge devices, communications hardware, and power systems used in Smart Services applications. · Develop and maintain technical standards, reference designs, and best practices for Smart Services hardware and telemetry communication. · Support prototyping, testing, and field validation of new Smart Services technologies. · Provide technical input across automation, controls, and software‑enabled systems as needed. · Influence platform architecture and technical direction through hands‑on engineering expertise. TO BE SUCCESSFUL IN THIS ROLE, YOUR EXPERIENCE AND COMPETENCIES ARE · Bachelor’s degree in Electrical Engineering or a related field. · 10+ years of experience in electrical engineering, preferably in industrial, mobile equipment, or heavy machinery environments. · Strong background in electrical system design, integration, and troubleshooting for hardware‑based products. · Experience with embedded systems, controls, telematics, or mobile equipment software integration is strongly preferred. · Highly proficient designing and working with many types of sensors, data acquisition, and communications systems. · Ability to collaborate effectively across engineering disciplines, including controls, automation, and software teams. · Demonstrated experience providing technical leadership and influencing design decisions, without direct people management. · Hands‑on experience writing and maintaining code for automation, diagnostics, data handling, or embedded/edge systems. · Comfortable operating in early‑stage or evolving technology environments, including prototyping and field validation. · Strong communication skills, with the ability to translate technical concepts into clear, practical solutions. Supervisor and Leadership Expectations · This role will not have supervisory or managerial responsibilities. · This role will have program management responsibilities. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success Travel Requirements ~10-20% of travel to support prototyping WORK ENVIRONMENT Office While performing the duties of this job, the employee is regularly exposed to risk of injury in an office environment and occasionally a manufacturing shop plant environment. Duties include a typical office setting including extensive computer work, sitting or standing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description Chief Engineer Our Culture: We are a highly entrepreneurial company limited only by our imagination. Diversity and teamwork are major aspects of our culture. Our property associates are a highly team-focused group bringing out the uniqueness of each associate to provide great products and services. Success comes to those who continuously seek opportunities to learn and pass on new knowledge. We always strive to be better, never bored, and never complacent. Our teams thrive on hard work, inclusivity, and producing outstanding experiences. We endeavor to make our fellow associates feel comfortable and entrepreneurial so that they can engage unhindered. Finally, giving back to the community is also vital to our culture. Our properties live by the philosophy that they are an important part of their communities and look for ways to partner in the local community to make a difference. Job Description: The Chief Engineer will oversee the functionality and safety of the hotel property, including the physical buildings, mechanical equipment, electrical system/s, heating and cooling systems, life safety systems and grounds in accordance with local, state and federal laws and regulations. They will direct general construction and the installation, maintenance, and repair of all electrical, mechanical, and architectural systems throughout the facility to ensure operational efficiency and safety. The person in this position must be able to roll their sleeves up and assist our teams when needed, living our “ONE TEAM. ONE VISION.” philosophy. This person must also provide innovative ways that align with our mission to be the best, most respected hotel company in America. The job is simple: Focus on ways to promote and engage in internal growth programs. Continuously exemplify and live by our Culture. Meet/exceed our company goals and three metrics. • Complete all required training, • Adhere to all standard operating procedures and property specific brand standards, • Perform any other duties as requested by management to aid in better operation of the hotel and service to the guests, • Is able to communicate effectively in writing, verbally, and in person, • Is able to work a flexible schedule. We are a 24/7 business which may require work availability of nights, weekends, and holidays, • Maintain a clean and attractive work area, uniform, and person, • Maintain knowledge of fire alarm and evacuation procedures, • Test and maintain water content of swimming pool and whirlpool in accordance with company standards and state requirements, • Maintain parts and supplies inventory, • Inspect and maintain elevators, • Have knowledge of OSHA procedures and training, • Repair furniture and structures, • Maintain and repair general plumbing systems such as pipelines, toilets, tubs, sinks, whirlpools, pools, and drains, • Complete weekly preventative maintenance logs, as well as QA documentation, • Maintain and test all life safety systems, • Assign, verify, and document completion of all routine maintenance and repairs in the property maintenance management system, • Communicates with city/county/state officials to ensure the proper maintenance of permits and licenses, to coordinate required inspections and to ensure full compliance with codes, regulations, and safety standards, • Leads special projects, as needed, • Assist in monitoring and developing team member performance to include, but not limited to, providing supervision, scheduling, conducting counseling and evaluations, providing professional development, and delivering recognition and reward, • Discuss bids with General Manager, and oversee any work contracted, • Direct and oversee the functionality and safety of the facility, including, but not limited to, physical buildings, mechanical equipment, electrical systems, heating/cooling systems, plumbing systems, life safety systems and grounds according to federal, state, and local regulations, • Inspect and direct general construction, installation, and maintenance of all electrical, mechanical, and architectural systems throughout the facility to ensure operational efficiency and safety. Necessary Skills: • Be able to bend, reach, kneel, push, and stretch and lift and/or carry up to 25 pounds, • Can perform work for 8 hours and work in a restrictive space/environment., • Must have eyesight enabling vision both near and far, • Must be comfortable using a step stool or ladder, • Must be able to use/lift arms for up to 8 hours, • Must be able to handle heat and stress, • Able to work in varying weather conditions such as heat, cold, rain, etc., • Have finger dexterity for operating equipment, • Must speak in a clear, understandable voice, hear at a basic level, and understand English, • Must be able to write, • Have dependable transportation available, • Has the highest degree of integrity and is humble, living by the Golden Rule, • Able to work with people from diverse cultures and backgrounds, • Values of dedication, innovation, showing respect, being driven by excellence, being community-focused, and having a spirit of service. Vision Hospitality Group is an equal opportunity/AA/Disability/Veteran employer. As an Equal Opportunity Employer, Vision Hospitality Group celebrates diversity and is committed to creating an equitable and inclusive environment and a sense of belonging for all associates. We do not discriminate and believe everybody should be proud of who they are, represent their culture and heritage, and live by the Golden Rule. Vision Hospitality Group LLC, offers the following benefits: • Paid Time Off, • Optional Health, Wellness and Care benefits, • Health Reimbursement Program, • Flexible Spending Account, • Stay Discounts, • Optional Company paid Life Insurance, • 401(k) and 401(k) matching, • Employee Assistance Program, • Several Voluntary and Supplemental Insurance Options, • Select Paid Holidays and One Personal Floating Holiday, • Loyalty Incentives and Other Unique Incentive Programs

Job Description We are currently hiring a Senior Mechanical Engineer in our Building Engineering division at our Chattanooga, TN office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Mechanical Engineer will work with clients to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. Duties • Work closely with the mechanical engineering staff to develop concepts, strategies, construction documents and engineering reports for new building renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including HVAC, plumbing, process piping systems and fire protection design., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing mechanical project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred., • Bachelor’s degree in Mechanical Engineering is preferred., • Strong writing, organizational and communications skills., • Ability to work under pressure, and multi-task efficiently., • Tennessee Professional Engineer’s License is a preferred. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description GIG South / Generation Industrial and Government Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Senior Electrical Engineer who will, on a task basis, be the design lead with responsibility for the preparation and completion of discipline engineering designs and supporting documentation; such as design criteria, calculations, and specifications. Educational Requirements • BSEE from an ABET accredited college/university, • 10-15 Years of progressive experience, • Current Professional Engineer (PE) license is preferred.Responsibilities, • Ability to identify, analyze, and solve routine technical problems related to specialty area., • Possess aptitude for computing and design., • Possess working knowledge of computers and software such as AutoCAD, Microsoft Office Suite and software used for specific technical applications within the department. ETAP experience a plus., • Experience with Motor Control Centers, Switchboards, and Switchgear preferred., • Experience with Low/Medium Voltage equipment preferred., • Experience with protective relaying is preferred, • Ability to lead projects with minimal oversight is required. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 2 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a P&C Engineer I for our Power Delivery Substation engineering design team based out of Chattanooga, TN. The successful candidate has 4-5 years of experience in P&C substation design in 69kV to 500kV substations. They will work with a team to complete substation P&C design projects to meet client standards and practices. They will be responsible for maintaining good quality and efficiency while developing deliverables such as: Single Line Diagrams, AC & DC Elementary/Schematic Diagrams, Panel Layouts, Wiring Diagrams, Cable Lists, Bills of Material, etc. Education/Experience/Licensure • Bachelor of Science in Electrical Engineering, or related, from an ABET accredited college or university is required., • Minimum of 4-5 years of progressively responsible experience in 69kV to 500kV substation P&C design is required., • PE is required. Responsibilities • On a task basis, is responsible for preparation and completion of discipline engineering designs and supporting documentation such as calculations., • Coordinates and prepares calculations, specifications, reports, design details, plans, and drawings within assigned task areas., • Interfaces with other disciplines on multi-discipline projects as required., • Responsible for adhering to project scope, schedule, and budget on all assigned projects., • Performs other duties assigned by Engineering Supervisor or Engineering Manager., • Establish, promote, and assure quality on all project work., • Work with Engineering Supervisor or Engineering Manager to follow up on construction issues with field engineers to help resolve problems and concerns in a timely manner., • Attend group meetings with staff as required., • Incorporate safe work practices into all activities., • Work with Engineering Supervisor or Engineering Manager and team to assist with project execution, work processes, and procedures to help continually improve quality, productivity, and efficiency., • Use strong verbal and written communication skills with team members and clients., • Use interpersonal skills to build relationships with team members and clients., • Possess knowledge and experience with Microsoft Office Suite and AutoCAD., • Estimate and assist in the preparation of bid packages., • Attend scoping meetings as requested for projects., • Mentor other designers/engineers in the group to increase knowledge of P&C substation design., • Check/review other personnel work for accuracy and adherence to client/national standards., • Work with Engineering Supervisor or Engineering Manager to identify potential areas of engineering process and/or procedure improvements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description GIG Nuclear / Generation Industrial & Government This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. The position is hybrid working a minimum of 3 days in the office, typically Tuesday through Thursday, with the ability to work from home the remaining workdays. Candidates must be able to travel to plant sites when needed (approx. 6-8 days/month with ability to support longer durations). We’ve got the power to energize your career and spark YOUR work/life balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive and meaningful career. Mesa Associates, Inc. is a woman/minority-owned full-service engineering, procurement, and project management firm covering power, defense, aerospace, industrial, commercial, and municipal entities. We specialize in power generation and delivery services. Our Nuclear Services Division specializes in providing high-quality engineering, procurement, design, and project management for operating and new reactor clients, and partners with our other divisions to integrate nuclear design with electrical high-voltage, substations, switchyard, transmission line, distribution, and artificial intelligence integration design. We have been in the top 10 of EC&M's Top 40 Electrical Design Firms since 2012. With over 1,000 associates, we are big enough to perform, but small enough to care! Education/Experience/Licensure: • Bachelor of Science degree in Mechanical or Nuclear Engineering from an accredited university (required), • EIT (highly preferred) – or ability to obtain EIT within one year of employment (required), • Previous design experience related to modifications in nuclear (DOE or commercial) plants (preferred), • 4+ years' experience working with multiple operating nuclear clients and vendors (preferred), • Ability to obtain unescorted access at an operating or construction nuclear plant (required), • Basic knowledge of mechanical design codes (ASME, ANSI, API, NFPA), • Proficient computer skills (e.g. Microsoft Office Suite). Additional software skills including Bluebeam, MicroStation, AutoCAD, Vault, Plant3D, Inventor, ReCap, SolidWorks, FARO Scene, and other 3D rendering programs (preferred) Responsibilities: • Participate in the development of deliverables for nuclear projects within the Mechanical and/or Nuclear discipline, • Report to an assigned Project Engineer and act as a Design Engineer for Mechanical and/or Nuclear projects, • Be responsible for working with other engineers and designers to prepare design change packages for modifications at operating nuclear plants and other associated nuclear facilities, • Be proficient in preparation of engineering change packages (EC’s), • Conduct field walkdowns to determine existing configuration of plant structures, systems, and components, • Follow a strict adherence to mechanical codes and standards Successful candidates will: • Possess the ability to interpret codes and, regulations, and standard practices, • Be able to demonstrate adaptability; must be proficient in identifying, troubleshooting, and resolving issues within a nuclear power plant environment, • Have effective oral and written communication skills (includes technical writing), • Possess excellent communication skills and ability to interface with customers and internal team members under a matrixed organization Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 2 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Physical Engineer I for our Power Delivery Substation engineering design team based out of Chattanooga, TN. The successful candidate has 4-5 years of experience in Physical substation design in 69kV to 500kV substations. They will work with a team to complete substation Physical design projects to meet client standards and practices. They will be responsible for maintaining good quality and efficiency while developing deliverables such as: General/Electrical Arrangement Plans, Equipment Plans/Layouts/Sections, Conduit & Cabling, Grounding & Lighting, etc. Education/Experience/Licensure: • Bachelor of Science in Electrical Engineering, or related, from an ABET accredited college or university is required., • Minimum of 4-5 years of progressively responsible experience in 69kV to 500kV substation Physical design is required., • PE is required. Responsibilities • On a task basis, is responsible for preparation and completion of discipline engineering designs and supporting documentation such as calculations., • Coordinates and prepares calculations, specifications, reports, design details, plans, and drawings within assigned task areas., • Interfaces with other disciplines on multi-discipline projects as required., • Responsible for adhering to project scope, schedule, and budget on all assigned projects., • Performs other duties assigned by Engineering Supervisor or Engineering Manager., • Establish, promote, and assure quality on all project work., • Work with Engineering Supervisor or Engineering Manager to follow up on construction issues with field engineers to help resolve problems and concerns in a timely manner., • Attend group meetings with staff as required., • Incorporate safe work practices into all activities., • Work with Engineering Supervisor or Engineering Manager and team to assist with project execution, work processes, and procedures to help continually improve quality, productivity, and efficiency., • Use strong verbal and written communication skills with team members and clients., • Use interpersonal skills to build relationships with team members and clients., • Possess knowledge and experience with Microsoft Office Suite and AutoCAD., • Estimate and assist in the preparation of bid packages., • Attend scoping meetings as requested for projects., • Mentor other designers/engineers in the group to increase knowledge of Physical substation design., • Check/review other personnel work for accuracy and adherence to client/national standards., • Work with Engineering Supervisor or Engineering Manager to identify potential areas of engineering process and/or procedure improvements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Overview As a Fleet Mechanic with MYR Group, you'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position will be based in Charleston, TN. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group Inc. (MYR Group) is a publicly traded holding company of specialty electrical construction companies. MYR Group subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our rich history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most complex projects, including new construction, upgrades, maintenance and repair for transmission, distribution and substation facilities, commercial and industrial electrical construction, emergency and storm restoration, clean energy, pre-construction services, and engineer-procure-construct (EPC) methods of project delivery. Essential Functions • Perform minor servicing and repairs, with oversight from senior mechanics, on various types of equipment, including malfunctioning parts and systems, in compliance with manufacturer guidelines and company schedules., • Performs routine and preventive maintenance, including oil changes and tune-ups., • Identifies mechanical problems either visually or with computer diagnostic equipment., • Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed., • Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate., • Conduct safety inspections of equipment and prepare safety documentation., • Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required., • Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements., • Regular and predictable attendance., • Other duties as assigned., • Essential functions of this position are to be performed at a Company-designed office or field location., • Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards. Responsibilities Qualifications • Must have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair OR have one year of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement., • Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing., • Must be at least 18 years of age., • High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities • Must be reliable and have a strong work ethic, • Must possess good teamwork skills to work effectively with coworkers, • Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log, • Basic computer or data entry skills, • Experience using mechanical tools, materials, and testing equipment, • Working knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment, • Ability to follow posted safety rules and safe operating procedures, • Basic understanding of applicable regulatory guidelines and rules Physical Requirements • Reaching (including above your head); bending, climbing, pushing, pulling, twisting, squatting and kneeling to perform repairs and inspections Lifting - medium level work - exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects • Must be able to routinely perform work both indoors in climate-controlled shared work area with moderate to loud noise level, outside in sometimes inclement weather, or potentially difficult/hazardous conditions, • May be subject to hazards including variety of physical conditions, such as proximity to moving mechanical parts and moving vehicles, • May be subject to vibration, such as oscillating movements of extremities or entire body Upon recommendation of the immediate supervisor, approval by the VP of Fleet, and demonstrated proficiency to meet the job requirements of the next level, incumbents in this position level may advance to the next level classification based on position availability. Qualifications Compensation & Benefits • Salary $21.0-$27.00 / Hour, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate., • Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage., • Dental – 100% employer-paid premium., • ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases., • Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday)., • Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential., • Superior educational assistance program (support for educational costs, internal training, and more!)., • Company-paid short and long-term disability, life, and accidental death & dismemberment., • Company-paid business travel accident insurance., • Employee Assistance Plan (EAP)., • Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents., • Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Job Description PDS 6 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We have the power to energize YOUR career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Senior Physical Design Engineer to be responsible for supervising the design and checking of deliverables associated with a high voltage substation design projects. Candidate must be familiar with the design of One Line Diagrams, Substation Layouts, Foundation Plans, Conduit/Raceway Plans, Grounding Plans, Bills of Materials, and Cable Schedules. The design will be completed using Autodesk products, mainly Inventor and AutoCAD. Responsibilities • Provide mentorship and training for junior level team members, • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Utilize AutoCAD based physical design standards, • Performs technical preparation of deliverables and other project documents, • Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements Required Qualifications • Bachelor's degree in Electrical Engineering (ABET Accredited), • 8-12 years experience in the design of substation physical design deliverables, • Proficiency in verbal and written communication, • Proficiency with layout designs in 2D Preferred Qualifications • Expertise utilizing AutoCAD and/or Inventor, • Knowledge of Power Systems or Substation Design, • Keen interest in learning and using the latest Autodesk software tools, methods, and technologies to develop Power Substation design, • Proficiency with layout designs in 3D This opportunity is a hybrid arrangement located in Mesa's Knoxville, TN office. A fully remote arrangement may be considered for highly qualified candidates located in the Southeast region of the United States. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description With over 100 years of success, Nixon Power Services is proud to be the world’s largest distributor of Rehlko Power generators (formerly Kohler Power). We’re powered by people who are passionate, grounded, and ready to roll up their sleeves. Our culture is flexible, fast-moving, and full of opportunity, because we believe work should be both rewarding and dynamic. We operate in an environment where flexibility and a willingness to take on new responsibilities keep things interesting! We value team members who are passionate, down to earth, have a “can do” attitude, and enjoy providing premium services to customers. This position is responsible for leading technical discussions with general and electrical contractors, engineering firms, vendors, end users and internal departments to successfully achieve project milestones and ensure ultimate customer satisfaction. What You’ll Be Doing • Be the technical liaison to ensure project integrity from a scope, installation, and commissioning standpoint., • Ensure accurate and timely communications between Nixon sales team, Nixon aftermarket team, contractor(s), and end user., • Become involved in industrial sales projects when deemed likely to become an order., • Answer, assess, and resolve submittal comments and issues regarding technical design., • Track and manage the achievement of each milestone within a project schedule., • Report to Nixon management on project status and issues as required., • Meet with sales representative, sales management, contractor, and applications engineer to establish final BOM and customer delivery requirements., • Attend Submittal review meetings; make document and draw updates as required., • Generate and compile submittal documents for completion by the submittal coordinator., • Coordinate communications between all entities associated with milestone achievement to ensure completion., • Attend site meetings when required for complex projects, including project kickoff, submittal review, site commissioning, etc., • Lead site meetings, as required, ensuring timely completion along with accurate installations and startup., • Ensure Nixon field service is involved prior to shipment of equipment to customers., • Schedule site services kickoff meeting with field service prior to startup date., • Intervene at all points in the process as needed to ensure achievement of all project milestones, and project comes in on time and under budget. What we're looking for: • Ability to multi-task, prioritize, and manage time effectively with strong attention to detail., • Excellent communication skills, both written and verbal., • Strong organizational skills., • Ability to learn quickly and teach others complex data, process, and control tasks., • Proficient in Microsoft Suite of programs., • Ability to manage complex spreadsheets., • Ability to establish and maintain relationships., • Ability to understand the complexities of situations, projects, and positions as well as 360 balances of all processes and procedures., • Degree Required: Technical School Certificate, Degree Preferred: Bachelor's Degree, • 8+ years of technical experience with large power distribution systems, three phase UPS systems, switchgear, generators, or batteries., • Experience in the on-site power generation is required., • Ability to travel 40-60% of the time., • Use hands/fingers to handle or feel., • Reach with hands and arms., • Stand, walk, sit, climb, balance, stoop, kneel, crouch and crawl., • Ability to sit for long periods of time. What's in it for you? • Competitive compensation package, • Full Benefits: Medical, Vision, Dental, and more!, • Paid Time Off, • 401(k) matching, • Opportunity to get in with an industry leading organization, • Team-oriented culture

Job Description PDS 8 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. What We’re Looking For • Bachelor's degree in electrical, mechanical, or civil engineering (ABET Accredited)., • Active Professional Engineer (PE) license – Required. Multi-state licensure or willingness to obtain reciprocity is a plus., • 6+ years in the substation/utility industry, with 4+ years in substation physical design across voltage ranges spanning 12kV to 230kV., • Deep substation physical expertise – Foundations, structural steel, grounding, cable routing, equipment power ratings, clearances, and conductor sizing across utility standards (IEEE, NESC, ASCE)., • Experience with grounding, lightning, and lighting studies – both performing them and reviewing the team's calculations., • Design software proficiency – Expert with AutoCAD and Bentley MicroStation; comfortable with Bluebeam Revu for markups; working knowledge of grounding analysis tools (WinIGS, CDEGS, or ETAP)., • Client-facing communicator – Able to lead design reviews, kickoffs, and scope discussions directly with utility clients and other consultants., • A coach's mindset – you find it as rewarding to develop the engineers around you as to ship your own deliverables., • Steady under pressure – comfortable balancing technical responsibilities with people responsibilities when project demand spikes., • Previous management experience is a plus, not a must – strong technical contributors ready to grow into leadership are encouraged to apply., • Knoxville-based or within commuting distance – this role is based in our Knoxville, TN office and works in-person with the team., • Travel availability – Willing to travel to client sites for periodic site visits, typically 3–4 single-night trips per month. What You’ll Lead • A small, cross-experience team of substation physical engineers, designers, and drafters – coordinate their assignments, mentor and develop them, and set technical direction for the group., • PE review and sign/seal – Review and sign/seal packages that require a PE seal as the licensed engineer on the team., • Client relationships on technical scope – Serve as the substation physical point of contact for assigned clients; lead design reviews, present rationale, and negotiate change in scope., • Standards and best practices – Shape Mesa's internal substation physical standards, calculation templates, QA checklists, and lessons-learned library., • Quality and safety culture inside the group – set the expectations, model the behavior, and make sure both show up in every package., • Hiring, onboarding, and development – Spot who's ready for the next stretch assignment; participate in interviews, review portfolios, and ramp new engineers onto active projects., • Proposal and estimating support – Partner with proposal teams to scope substation physical effort, contribute technical narratives for RFP responses, and help shape win-themes for new pursuits. What You’ll Do • Partner with program managers, project managers, and the engineering manager to staff projects, and coordinate design tasks across the team so workloads stay balanced and predictable., • Lead the design of equipment, structural, foundation, grounding, and cable routing plans and details for medium- to large-scale transmission substation projects., • Direct grounding, lightning, and lighting studies; review and approve calculations produced by the team., • Coordinate across Protection & Controls, Civil, Studies, Scoping, and other disciplines to keep multi-discipline packages aligned., • Step in as a designer or checker when workload demands it – this is a working supervisor role, not a pure people-management one., • Run technical oversight and final QA – own the checking and review process so packages leave the group right the first time, meeting code, client requirements, and Mesa's internal QA procedures., • Own client communication on substation physical scope: kickoffs, design reviews, RFI responses, change orders, and closeout documentation., • Hold regular team conversations, both 1:1 and group, to share company direction, surface blockers, and keep the team aligned., • Identify process improvements and develop internal time-saving tools, templates, and standards that scale across the group., • Approve timesheets, overtime, and vacation requests, and approve expense reports as appropriate. What You’ll Earn • Paid Time Off, • Holiday Pay – 10 Days Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings plan, • 401(K) Matching Contribution, • Section 125/Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Option Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Our client, an engineering design and consulting firm, is hiring an experienced Electrical Design Engineer (PE) to lead electrical system design and planning for industrial, commercial, and architectural projects. Key Responsibilities Collaborate with project teams and clients to ensure clear communication and successful project delivery Prepare drawings, calculations, specifications, and sketches for electrical systems Perform short circuit studies, fault calculations, and other electrical system analyses Conduct site visits to collect data on existing facilities and equipment Utilize AutoCAD, Revit, Microsoft Office, and other engineering software to produce deliverables Manage project deadlines with strong organizational skills Contribute effectively in a team-oriented, fast-paced, and diverse work environment Apply knowledge of electrical codes and standards, including the National Electrical Code (NEC) Stay proactive in learning new technologies and identifying process improvements Qualifications Bachelor’s degree in Electrical Engineering from an ABET-accredited program (Master’s preferred) Professional Engineer (PE) license required Ability to obtain NCEES registration Proficiency with AutoCAD, Revit, Microsoft Office, electrical design software Knowledge of NEC codes, electrical standards, and calculations Commercial & Industrial Construction Our client offers: Base salary in the $130k range Bonuses and profit-sharing opportunities Hybrid flexibility Comprehensive benefits package that includes health/dental/vision insurance, 401k match, paid time off and holidays, profit sharing program, and more Relocation assistance is available Pay Details: $110,000.00 to $140,000.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: Assists the General Manager in ensuring that all areas of the hotel remain properly functional. Performs repairs and preventative maintenance work to ensure the hotel maintenance quality standards are achieved and maintained. Provided excellent guest service in an efficient, courteous professional manner; following LBA standards of friendly hospitality while adhering to guidelines and procedures. PREREQUISITES Company associates have access to guestrooms and property. As such, character traits of honesty and trustworthiness are essential to this position and must be displayed at all times. Per company policy, potential associates must pass appropriate security clearances. • Working knowledge of: preventative maintenance, electricity, ac and plumbing, • Five to ten years as a maintenance engineer or technician or similar position, • HVAC and Pool Certification preferred SUMMARY OF ESSENTIAL JOB FUNCTIONS • Must be able to perform major life activities: Standing, lifting, bending, learning, reading, concentrating, thinking, and communicating., • Must be able to push or pull 100 pounds unassisted and lift and/or carry 60 pounds unassisted., • Must be able to stand for eight hours, bend, stretch, reach, climb ladders, crawl, kneel and be low to the ground when necessary, sometimes for extended periods of time., • Must be able to communicate with other associates and/or guests., • Must be able to see and hear. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES Knowledge: • The methods, practices, tools, equipment, and materials used in a variety of building and mechanical trades., • Occupational hazards in the use of power tools and equipment, and of necessary safety precautions., • Repairs and maintenance of furniture and fixtures within the hotel., • Safety and security measures. Report or correct any hazardous conditions observed immediately., • Guidelines for training checklist of areas to be maintained., • Procedures for emergencies Person In Charge. Skills: • Supervise, perform and document preventative maintenance program according to The Company and brand standards., • Must be organized to maintain logs, bibles, checklists on schedule., • Perform preventative maintenance and repairs as well as general maintenance on property grounds., • Use and care of hand and power tools and equipment appropriate to the area assignment., • Assist with guest issues, be professional and maintain a hospitable caring attitude. Abilities: • Ability to assign and supervise the work of a few less experienced workers., • Communicate effectively with staff and upper management., • Practice Safety Standards at all times., • Must be able to work as a team member., • Comply to all standards., • Work within the budgetary guidelines. Able to understand the importance of cost saving without sacrificing service., • Remain service centric., • Communicate professionally with guests and co-workers., • Must be able to exercise discretion to maintain guest privacy. SPECIFIC RESPONSIBILITIES • Walking property grounds regularly to oversee functioning of the facilities., • Interviewing and selecting new maintenance staff., • Oversee the maintenance staff, including discipline and retraining when necessary, in conjunction with handbook policies and procedures., • Diagnose malfunctions and defects in mechanical and similar equipment and to determine corrective measures and delegate repairs when applicable., • Perform general minor repairs to in house plumbing, electrical, refrigeration, kitchen equipment and HVAC systems., • Maintain facility using consistent preventative maintenance guidelines: check and ensure repairs are made to plumbing systems, electrical systems, building interior and exterior., • Conduct quality inspections of the property and make recommendations regarding safety, security and facility improvements., • Respond to work orders in a timely manner., • Train all maintenance staff and other designated associates in the responsibilities and safety., • Work with associates regarding their role in the upkeep, safety and security of the property., • Maintain all paperwork in accordance with LBA standards., • Help property management determine what tools, materials and equipment are necessary to maintain the property and perform necessary maintenance and repairs., • Ensure maintenance department and applicable staff have sufficient tools to do their jobs daily., • All other duties as assigned and within the realm of physical capabilities. WORKING CONDITIONS/SPECIAL REQUIREMENTS • This position requires a physical presence at the hotel and is not conducive of telecommuting or remote work., • Standing, walking for long periods of time while maintaining a friendly professional image., • May be required to spend long periods of time outdoors in heat/cold., • May be required to work any day/shift, including nights and weekends., • Periodic overnight travel required may be required. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.

Job Description We are seeking a Senior Electrical Engineer with a strong focus and background in Building Projects to work in our Chattanooga, TN Office. This position will work closely with engineering staff to develop concepts, strategies, designs, drawings, specifications, and reports. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents. Duties • Working closely with engineering staff to develop concepts, strategies, designs, drawings, specifications and reports., • Assist our Energy Business Unit with Energy Clients. Requirements • Bachelor’s degree., • Minimum of 10 years of experience working at an A/E consulting firm is preferred., • Tennessee Professional Engineer’s license is a plus., • AutoCAD experience is required., • Experience in electrical distribution systems, power, lighting, and utilities, as well as communications, security, and fire protection is desired. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description:\n\nBUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION At Astec, we are building a world-class electrical hardware and controls software engineering team. A team that values free thought for innovative idea generation and disciplined engineering for the realization of those ideas to drive solutions for our customers. By freeing our creative minds, we bring solutions our customers haven’t even realized they need yet. Through disciplined engineering we ensure the solutions we provide are effective, simple to use, reliable, and cost effective. The Electrical Engineer will be a part of a dynamic team of engineers working on the development of control/automation systems for heavy construction equipment, ranging from road pavers, road mills, woodchippers, wood grinders, etc. The engineer will be involved in the creation of product requirements, decomposition to electrical hardware and software requirements, design calculations, schematic generation, PCB designs, junction box designs, wiring harness routings and designs, and electrical design reviews of the same; all with an eye toward Design for Reliability (DfR). The engineer may also work on structured software decomposition, code development, software design reviews, and software unit and integration testing. The engineer will move from project to project as required and may be working on multiple projects within a given timeframe. All project work will be scheduled by the New Product Development Manager(s) and the Continuous Improvement Manager(s) such that the engineer will not be over allocated but will have definite deadlines and visibility into upcoming work. Electrical designs will be based on embedded controller and HMI displays. The designs will predominately be composed of 24VDC control of motors, valves, pumps, actuators, relays, etc. with sensor inputs in the same or similar range. Control outputs may be DC voltage or current, PWM, or PID control loop signals. Some designs will require AC power control using VFDs, soft starters, etc. Software will be developed on PLCs, embedded controllers, and HMI displays. Some legacy systems are coded in Ladder Logic, but all new systems will be coded in either CodeSys or C/C++. The Control Software Engineer will work with the Electrical Engineer(s) on a project to map I/O, define necessary configurations, understand sensor input requirements as well as device output drive requirements. The Electrical and Control Software Engineers will work cooperatively with the Mechanical Engineer(s) to develop the appropriate control controls hardware design as well as controls algorithms to produce the equipment functionality required by the customer and Product Management. The Electrical Engineer will also work with other cross-functional teams, including but not limited to sales, manufacturing, purchasing, and service to ensure the successful completion of projects and launch of equipment. Electrical Engineer may at times be asked to travel for project testing and system integration testing, as well as to develop business relationships with customers, dealers, and suppliers. They may also participate in product focus groups to gain critical customer application and design suggestions to assist in the development of product lines. Travel may also be required at times to troubleshoot and resolve customer equipment issues in the field. ESSENTIAL DUTIES AND RESPONSIBILITIES (may include but not limited to) · Works with the cross-functional Product Management Team to produce a complete and well-defined Product Functional Specification before product design is started. · Follow Structured System Design techniques to decompose the product function requirements into an effective control strategy for heavy construction equipment. · Uses knowledge of sensor technologies, control device technologies and process automation techniques to advance the simplicity of operation and troubleshooting of equipment to maximize productivity by enhancing operator functionality and the minimization of equipment downtime. · Uses knowledge of domestic as well as international electrical standards to design equipment with the widest market breadth without redesigning to minimize the number of models required to be manufactured. · Apply Design for Reliability processes and principles to realize desired equipment reliability and Total Cost of Ownership requirements. · Uses structured system design techniques to produce electrical hardware designs that are modular in nature, easy to test, easy to diagnose and simple to replace should field service repairs be required. · Develops and executes bench tests with the Controls Software Engineer on design modules and code units to ensure proper functionality before integration into the complete equipment design to ensure project success. · Uses computer-aided engineering design software and equipment to develop electrical / electronic design drawings and schematics. · Develop PCB layout designs for panels. · Develops 3D Junction Box designs with plug-and-play functionality that allow manufacturing to simply plug in all harnesses and requires no landing of conductors in equipment assembly. · Create 3D routed wiring harnesses for all wires and cables required for a system design. All harnesses shall be terminated in a connector to allow for a plug-and-play assembly. · Develops detailed drawings for new designs and modifications to existing designs. · Leads cross-functional electrical design reviews, including Design for Manufacturability and Design for Reliability. · Contributes to the development of product documentation, including production work instructions, training manuals, troubleshooting guides, and product test plans. · Identifies improvement opportunities and enhancements for product enhancements and/or cost reductions. · Contributes to project teams by championing the successful completion of project objectives, including schedule, budget, and feature set. · Contributes to the development of new processes and procedures to enhance the software and hardware design capabilities and work products of the engineering team. · Develops the electrical and software test plans for new designs and changes to existing designs and coordinates the testing and validation using these plans. · Participates in cross-functional software and HMI design reviews. · Participates in software design reviews for developed control software. · Assists customers, via telephone or on site, to resolve function and/or application issues. · Works with the Manufacturing department to resolve production issues. · Works with the Service Department to resolve field and warranty issues. · Works with the Purchasing Department and suppliers on new or existing component issues. · Works with the Technical Publications Department to develop and update operation/parts/service manuals. · Adheres to all Astec design and coding standards. · Performs engineering calculations as required during design cycle. · Follows proper safety procedures. · Performs other duties as assigned. MINIMUM EDUCATION and/or EXPERIENCE REQUIRED · Bachelor of Science (4-year) degree in Electrical Engineering from an accredited institution. · Minimum of three (3) years of experience in the design and development of industrial or mobile equipment controls. SKILLS AND ABILITIES REQUIRED Job-related Skills and Abilities · Knowledgeable of structured system design techniques. · Knowledge of Design for Reliability is highly desired. · Knowledge of design for safety standards such as CE, AS3000, SIL, HRN, etc. · Proficient with computer-aided design software. · Knowledge of network protocols such as CAN, Ethernet, Wireless 802.11, etc. · Proficient in the development, reading, and interpretation of electrical engineering drawings. · Proficient in electrical engineering systems design and troubleshooting, D/C controls design required, A/C design highly desired. · Ability to think creatively and propose innovative solutions to engineering challenges. · Ability to show competence in assessing, managing, and mitigating risks within a project and design. · Ability to work satisfactorily as a team member. · Good communication skills (both verbal and written). · Good organization and time-management skills. · Willingness to accept responsibility and take on new challenges. · Ability to exercise discretion and independent judgment on a customary and regular basis. · Proficiency with personal computer and Microsoft Office Suite software applications. · Proficiency with Electrical CAD software, specifically EPLAN, is highly desirable. · Adept at problem solving and root-cause analysis. Leadership Skills · Ability to mentor and lead junior level engineers in the design and execution of systems controls. · Ability to represent the electrical and software design team in cross-functional meetings by being the voice of good engineering practice. · Ability to step into a leadership void and lead a team to proper completion of tasks, projects, and investigations while encouraging others and moving toward a best solution for all involved. Language Skills · Ability to write reports, business correspondence and procedure manuals. · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. · Ability to write routine reports and correspondence and effectively present information to customers and/or employees of organization and respond to questions from groups of managers, clients, customers, and the public. Reasoning Ability Skills · Ability to define problems, collect data, establish facts, and draw valid conclusions. · Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. · Must have strong analytical and troubleshooting skills. OTHER REQUIREMENTS · Pre-employment drug screen, physical, and background check. · Flexibility to work additional hours as required. · Occasional travel (including international). · Valid driver's license and ability to safely operate a motor vehicle. PREFERENCES · Proficiency with Solidworks, EPLAN. · Experience with CodeSys, C++, Telematics, hydraulic circuits, 12V/24V DC electric circuits and/or control systems for off-road construction equipment or heavy industrial equipment. · Knowledge of manufacturing processes. · Experience in the design and manufacture of off-road construction equipment. · Experience with Design for Reliability. SAFETY Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment! · Proficient in promoting safe and healthy work environment. · Notify area supervisor of product discrepancies or equipment malfunctions. · Adhere to established company policies and procedures paying special attention to safety regulations. · Report defective materials, equipment, or questionable conditions to the area supervisor/manager to identify and correct the root cause. · Wear personal protective equipment (PPE) in accordance with training guidelines. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to remain in a stationary position a minimum of 50% of the time, move and frequently operate a computer and other office equipment and occasionally properly employ objects, tools and/or controls. The employee is frequently required to communicate and exchange accurate information. The employee is regularly required to reach and occasionally attain non-standard physical positions for varying amounts of time. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The employee must regularly transport up to 10 pounds and occasionally transport up to 25 pounds. Lifting devices must be used or help must be requested for anything over 25 pounds. Required to occasionally ascend/descend, balance and work at various heights. Ability to travel by land and/or air for extended periods of time. Specific vision abilities required by this job include close, distance, color, and peripheral vision, depth perception, and ability to adjust focus. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers. · Honesty and integrity in all aspects of business. · Respect for all individuals. · Preserving entrepreneurial spirit and innovation. · Safety, quality and productivity as means to ensure success. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to a climate-controlled office environment and is occasionally exposed to a shop manufacturing environment. Office environment exposures include frequent and extensive telephone and computer use. The noise level in the office setting is usually moderate consistent with an office environment. Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Mines, road construction and forestry job site exposures include exposure to climate conditions indicative of the geographic location and the season. Field duties require that the employee work in close proximity to heavy roadbuilding and construction equipment (dump trucks, loaders, cranes, crushers, pavers, cold planers, material transfer vehicles, stabilizers, wheel loaders, excavators, skidders, feller buncher, chippers, grinders etc.) and traffic associated with mines, road construction, forestry and recycling sites. The employee is frequently exposed to

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION At Astec, we are building a world class electrical and software engineering team. A team that values free thought for innovative idea generation and disciplined engineering for the realization of those ideas to drive solutions for our customers. By freeing our creative minds, we bring solutions our customers haven’t even realized they need yet. Through disciplined engineering we ensure the solutions we provide are effective, simple to use, reliable, and cost effective. The Controls Software Engineer will be a part of a dynamic team of engineers working on the development of control/automation code for heavy construction equipment, ranging from road pavers, road mills, rock crushers, woodchippers, etc. The engineer will be involved in the creation of product requirements, decomposition to software requirements, structured software decomposition, code development, software design reviews, and software unit and integration testing. The engineer will move from project to project as required and may be working on multiple projects within a given timeframe. All project work will be scheduled by the New Product Development Manager(s) and the Continuous Improvement Manager(s) such that the engineer will not be over allocated but will have definite deadlines and visibility into upcoming work. Software will be developed on PLCs, embedded controllers, and HMI displays. Some legacy systems are coded in Ladder Logic, but all new systems will be coded in either CodeSys or C/C++. The Control Software Engineer will work with the Electrical Engineer(s) on a project to map I/O, define necessary configurations, understand sensor input requirements as well as device output drive requirements. The Control Software Engineer will work cooperatively with the Electrical Engineer(s) and the Mechanical Engineer(s) to develop the appropriate control algorithms to produce the equipment functionality required by the customer and Product Management. The Control Software Engineer will also work with other cross-functional teams, including but not limited to sales, manufacturing, purchasing, and service to ensure the successful completion of projects and launch of equipment. Controls Software Engineer may at times be asked to travel for project testing and system integration testing, as well as to develop business relationships with customers, dealers, and suppliers. They may also participate in product focus groups to gain critical customer application and design suggestions to assist in the development of product lines. ESSENTIAL DUTIES AND RESPONSIBILITIES (may include but not limited to) Use structured systems engineering approach for the development of the software used to control heavy construction equipment. Uses knowledge of process automation techniques to advance the simplicity of operation and troubleshooting of equipment to maximize productivity by enhancing operator functionality and the minimization of equipment downtime. Uses structured software design techniques to distill product requirements into a product software specification, product software design, and product software test plan and creates the corresponding documents. Completes the controller/PLC programming and the HMI screen programming for product projects based on the software design. Performs unit testing and integration testing of all controller/PLC/HMI systems to insure performance and realization of all product requirements. Develops the software test plans for new designs and changes to existing designs, and coordinates the testing and validation using these plans, Contributes to the development of product documentation, including production work instructions, training manuals, troubleshooting guides, and product test plans. Identifies improvement opportunities and enhancements for product enhancements and/or cost reductions. Contributes to project teams to ensure the successful completion of project objectives, including schedule, budget, and feature set. Contributes to the development of new processes and procedures to enhance the software and hardware design capabilities and work products of the engineering team. Leads cross-functional software and HMI design reviews. Leads software design reviews for developed control software. Assists customers, via telephone or on site, to resolve function and/or application issues. Works with the Service Department to resolve field and warranty issues. Works with the Technical Publications Department to develop and update operation/parts/service manuals. Adheres to all Astec design and coding standards. Performs engineering calculations as required during design cycle. Follows proper safety procedures. Performs other duties as assigned. MINIMUM EDUCATION and/or EXPERIENCE REQUIRED Bachelor of Science (B.S.) degree in Electrical / Computer Engineering or related field. Minimum of three (3) years of experience in the design and development of industrial or mobile equipment control software. SKILLS AND ABILITIES REQUIRED Job-related Skills and Abilities Knowledgeable of development software and tools for embedded systems. Proficient in C / C+ / Structure Text programming, preferably in automotive or mobile equipment applications. Knowledgeable of network protocols such as CAN, Ethernet, Wireless 802.11, etc. Proficient at interfacing software with the control and data acquisition from sensor, including pressure, proximity, angular, temperature, etc. Proficient with developing code for the control of valves, motors, and other industrial devices. Ability to work satisfactorily as a team member. Good communication skills (both verbal and written). Good organization and time-management skills. Willingness to accept responsibility and take on new challenges. Ability to exercise discretion and independent judgment on a customary and regular basis. Proficiency with personal computer and Microsoft Office Suite software applications. Adept at problem solving. Language Skills Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Ability to write routine reports, correspondence, and effectively present information to customers and/or employees of organization and respond to questions from groups of managers, clients, customers, and the public. Reasoning Ability Skills Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must have strong analytical and troubleshooting skills. OTHER REQUIREMENTS Pre-employment drug screen, physical (if required), and background check. Flexibility to work additional hours as required. Occasional travel (including international). Valid driver's license and ability to safely operate a motor vehicle. PREFERENCES Experience with CodeSys, C/C++, and Ladder Logic programming. Experience developing software/firmware controls for and interfaces to Telematics, hydraulic circuits, 12V/24V DC electric circuits, A/C motors, and/or control systems for off-road construction equipment. Experience in the design and creation of software for the control & automation of off-road construction equipment. SAFETY Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment! Proficient in promoting safe and healthy work environment. Notify area supervisor of product discrepancies or equipment malfunctions. Adhere to established company policies and procedures paying special attention to safety regulations. Report defective materials, equipment, or questionable conditions to the area supervisor/manager to identify and correct the root cause. Wear personal protective equipment (PPE) in accordance with training guidelines. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to remain in a stationary position a minimum of 50% of the time, move and frequently operate a computer and other office equipment and occasionally properly employ objects, tools and/or controls. The employee is frequently required to communicate and exchange accurate information. The employee is regularly required to reach and occasionally attain non-standard physical positions for varying amounts of time. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. The employee must regularly transport up to 10 pounds and occasionally transport up to 25 pounds. Lifting devices must be used or help must be requested for anything over 25 pounds. Required to occasionally ascend/descend, balance and work at various heights. Ability to travel by land and/or air for extended periods of time. Specific vision abilities required by this job include close, distance, color, and peripheral vision, depth perception, and ability to adjust focus. Our Culture and Values Employees that become part of Astec embody the values below throughout their work. Continuous devotion to meeting the needs of our customers. Honesty and integrity in all aspects of business. Respect for all individuals. Preserving entrepreneurial spirit and innovation. Safety, quality, and productivity as means to ensure success. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to a climate-controlled office environment and is occasionally exposed to a shop manufacturing environment. Office environment exposures include frequent and extensive telephone and computer use. The noise level in the office setting is usually moderate consistent with an office environment. Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Mines, road construction and forestry job site exposures include exposure to climate conditions indicative of the geographic location and the season. Field duties require that the employee work in close proximity to heavy roadbuilding and construction equipment (dump trucks, loaders, cranes, crushers, pavers, cold planers, material transfer vehicles, stabilizers, wheel loaders, excavators, skidders, feller buncher, chippers, grinders etc.) and traffic associated with mines, road construction, forestry and recycling sites. The employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to high, precarious places, toxic or caustic chemicals, vibration, and risk of electrical shock. The noise level in this environment is usually loud and may require hearing protection. The employee is occasionally exposed to travel hazards associated with automobile and/or airplane travel. Equal Opportunity Employer As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or exe

Job Description PDS 6 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We have the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Substation P&C Engineering Associate to be responsible for the design and/or checking of deliverables associated with a high voltage substation. Candidate must be familiar with the design of One Line Diagrams, Control House layouts, Relay Panel Front Views, Elementary and/or Schematic Diagrams, Wiring Diagrams, Bills of Materials, and Cable Schedules. The design will be created using Autodesk products, mainly AutoCAD Electrical. This opportunity is available as a hybrid arrangement in Knoxville, TN, or as a fully remote arrangement in the Southeast region of the United States. Responsibilities • Must be able to complete assignments within budget and schedule with a high degree of accuracy, • Works under the direction of a P&C Group Lead, • Utilize AutoCAD Electrical (ACADE) based protection and control standards, • Performs technical preparation of deliverables and other project documents, • Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements Required Qualifications • Bachelor's degree in Electrical Engineering or Engineering Technology (ABET Accredited), • Proficiency in verbal and written communication, • 3-5 years experience in the design of substation P&C design deliverables Preferred Qualifications • Expertise utilizing AutoCAD and/or AutoCAD Electrical (ACADE), • Knowledge of Power Systems or Substation Design, • Keen interest in learning and using the latest Autodesk software tools, methods, and technologies to develop Power Substation design, • Engineer-in-Training Certification (EIT), • Professional Engineer (PE) License Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 8 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Mesa seeks an entry-level Substation Physical Engineer that is looking to start their career in the electric power industry. This position is for our Power Delivery Substation group which supports various clients across the United States. What We’re Looking for • Recent graduate with a bachelor’s degree in electrical, mechanical, or civil engineering (ABET Accredited)., • Fast learner – You can pick up new concepts, standards, and software quickly., • Self-starter – You’ll get direction from senior engineers, but you’re comfortable hunting down answers on your own when the path isn’t obvious., • Solid understanding of fundamentals – Ohm’s law, single-phase systems, three-phase power systems, and digital logic., • Clear communicator – You feel comfortable reaching out to others with questions and can communicate professionally face-to-face, on the phone, and over email., • Desire to pursue Professional Engineering licensure. What You’ll Learn • Substation Physical concepts – Fundamentals of foundation, grounding, and cable routing design, as well as equipment power ratings, clearances, and conductor sizing, • Design Software – AutoCAD/MicroStation, Bluebeam Revu, Microsoft Excel, etc., • Project lifecycle – How a project moves from conception, through design, to completion., • Cross-disciplinary collaboration – Coordinate with senior engineers, designers, project managers, and client personnel from other groups, such as Protection and Controls, Civil, Studies, etc. What You’ll Do • Work on a team of drafters, designers, and engineers, • Increase your knowledge under the mentorship of senior engineers, • Create equipment, structural, foundation, grounding, and cable routing plans and details, • Perform lightning and grounding studies, • Coordinate with other engineering disciplines, • Develop Bill of Materials (BOM), • Maintain quality assurance standards by completing client and internal checklists, • Perform peer-review of designs, • Progress to independent project ownership What You’ll Earn • Paid Time Off, • Holiday Pay – 10 Days Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings plan, • 401(K) Matching Contribution, • Section 125/Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Option Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description PDS 2 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Telecom Engineer I for our Power Delivery Substation engineering design team based out of Chattanooga, TN. The successful candidate has 4-5 years of experience in Telecom substation design in 69kV to 500kV substations. They will work with a team to complete substation Telecom design projects to meet client standards and practices. They will be responsible for maintaining good quality and efficiency while developing deliverables such as: Panel Front Views/Details, Communications Single Line Diagrams, Schematics, Wiring Diagrams, etc. Education/Experience/Licensure • Bachelor of Science in Electrical Engineering, or related, from an ABET accredited college or university is required., • Minimum of 4-5 years of progressively responsible experience in 69kV to 500kV substation Telecom design is required., • PE is required. Responsibilities • On a task basis, is responsible for preparation and completion of discipline engineering designs and supporting documentation such as calculations., • Coordinates and prepares calculations, specifications, reports, design details, plans, and drawings within assigned task areas., • Interfaces with other disciplines on multi-discipline projects as required., • Responsible for adhering to project scope, schedule, and budget on all assigned projects., • Performs other duties assigned by Engineering Supervisor or Engineering Manager., • Establish, promote, and assure quality on all project work., • Work with Engineering Supervisor or Engineering Manager to follow up on construction issues with field engineers to help resolve problems and concerns in a timely manner., • Attend group meetings with staff as required., • Incorporate safe work practices into all activities., • Work with Engineering Supervisor or Engineering Manager and team to assist with project execution, work processes, and procedures to help continually improve quality, productivity, and efficiency., • Use strong verbal and written communication skills with team members and clients., • Use interpersonal skills to build relationships with team members and clients., • Possess knowledge and experience with Microsoft Office Suite and AutoCAD., • Estimate and assist in the preparation of bid packages., • Attend scoping meetings as requested for projects., • Mentor other designers/engineers in the group to increase knowledge of Telecom substation design., • Check/review other personnel work for accuracy and adherence to client/national standards., • Work with Engineering Supervisor or Engineering Manager to identify potential areas of engineering process and/or procedure improvements. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Join Card-Monroe Corp. as an Electrical Engineer in Hixson, Tennessee, where innovation meets execution. This is your chance to collaborate with a dynamic team dedicated to solving complex challenges in the manufacturing sector. You'll engage in cutting-edge projects that push the boundaries of technology, enabling you to leave a lasting impact on the industry. With our commitment to safety and integrity, you can confidently develop solutions that enhance efficiency and reliability. This role offers the exciting opportunity to harness your creativity while working closely with cross-functional teams to drive forward-thinking initiatives. As part of a company that values a servant's heart, your contributions will truly make a difference. As a team member you'll be able to enjoy benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Competitive Salary, and Paid Time Off. Take this opportunity to elevate your career in a setting that prizes high performance and customer focus. Embrace the challenge and apply today! A little about Card-Monroe Corp. With more than 40 years in business we pride ourselves on being the world leader in tufting technology and we're looking for team members to help that statement continue to be true. We offer competitive salary and benefits and a unique culture where we value each individual employee. Please visit our website www.cardmonroe.com to learn more. Your day as an Electrical Engineer As an Electrical Engineer at Card-Monroe Corp., your primary responsibilities will encompass providing expert electrical representation during machine specification meetings, ensuring that all technical aspects align with project goals. You will offer vital technical support to the Electrical Service department, enhancing operational efficiency and addressing electrical challenges promptly. In this role, you will develop comprehensive Bills of Material that accurately reflect project needs and create detailed panel layouts and schematic drawings that facilitate the production and installation of advanced carpet tufting machine control systems. Your contributions will be instrumental in driving innovation and excellence within our manufacturing processes. What we are looking for in an Electrical Engineer To excel as an Electrical Engineer at Card-Monroe Corp., candidates must possess a BS in Electrical Engineering and have 3-5 years of experience in a similar role. Proficiency in creating and revising layout drawings and electrical schematics is essential, alongside the ability to develop accurate Bills of Material for new machines and machine conversions. Familiarity with compliance standards such as NEC, IEC, CSA, OSHA, and CE requirements is crucial for ensuring safety and adherence to industry regulations. Candidates should also be adept at providing technical support for pre-shipment machine commissioning and service departments, as well as supporting the replacement of obsolete products. Knowledge of AutoCAD Electrical software is beneficial, and the ability to function effectively in a team-oriented environment while managing appropriate process documentation will significantly contribute to success in this role. Knowledge and skills required for the position are: • Essential Job Duties and Responsibilities, • Create / oversee creation and revision of layout drawings and electrical schematics., • Develop BOM for new machines and machine conversions., • Facilitate compliance with NEC, • IEC, • CSA, • OSHA, • and CE requirements., • Evaluate / revise existing electrical BOM subassemblies., • Create and distribute machine electrical print package., • Provide engineering technical support for pre-shipment machine commissioning., • Provide engineering technical support to service department., • Provide support and replacement for obsolete products., • Create and support appropriate process documentation., • Qualifications and Education Requirements, • BS Electrical Engineering, • Able to function in a team-oriented environment., • Possess knowledge of standard practices for electrical documentation., • Knowledge of AutoCAD Electrical software would be beneficial., • 3-5 years' experience with similar dutiesOur team needs you! So, what do you think? If this sounds like the right position for you, go ahead and apply. Good luck!

A BS in electrical engineering or related field and a minimum of 5 years of relevant experience in design/systems engineering. As the Electrical, Instrumentation, and Controls Engineer, you will design and modify reactor instrumentation loops or power and control systems, provide technical support f

How will you get here? Education: Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa Experience: 2-5 years of electrical engineering in manufacturing. Ability to read, interpret, and execute schematics Must be able to lead techs and manufacturing pers

CWS is a leading provider of waste management services throughout South Carolina, Tennessee, Georgia, Virginia, and Florida areas.We are committed to providing superior customer service with our emphasis on integrity, reliability and cleanliness.We invest in our community, our customers and our empl

Bachelor’s degree in Mechanical Engineering or related engineering discipline. Sherman + Reilly is seeking an experienced and driven Mechanical Engineer III to join our Engineering team in Chattanooga, Tennessee. This position offers the opportunity to work on highly engineered products in a colla

Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and