Trabajos electrical training en Fresno, CaliforniaCrear alertas

Job DescriptionHVAC Technician Job Description APEX General Inc. Position Summary APEX General Inc. is seeking a skilled and motivated HVAC Technician to install, maintain, troubleshoot, and repair residential and commercial heating, ventilation, and air conditioning systems. The ideal candidate is safety-focused, customer-oriented, and capable of delivering high-quality workmanship while representing the company professionally in the field. Essential Duties & Responsibilities • Install residential and commercial HVAC systems., • Perform maintenance, diagnostics, and repairs on heating and cooling equipment., • Troubleshoot electrical, refrigerant, airflow, and control system issues., • Install and replace furnaces, air conditioners, heat pumps, mini-split systems, package units, and rooftop units., • Perform system startups, testing, and commissioning., • Measure and verify system performance including airflow, temperature split, refrigerant charge, voltage, and amperage., • Complete preventative maintenance inspections and provide recommendations to customers., • Maintain accurate job notes, photos, and documentation within company software., • Ensure compliance with manufacturer specifications, local codes, and safety regulations., • Maintain company vehicles, tools, and equipment in clean working condition., • Communicate effectively with customers, dispatchers, project managers, and team members.Qualifications, • Minimum 2 years HVAC installation and/or service experience preferred., • EPA Certification required., • Valid driver's license with clean driving record., • Strong understanding of HVAC systems, controls, electrical components, and refrigeration cycles., • Ability to read blueprints, wiring diagrams, and equipment specifications., • Strong troubleshooting and problem-solving skills., • Ability to lift 50+ pounds and work in attics, crawl spaces, rooftops, and outdoor environments.Preferred Certifications, • EPA Universal Certification, • NATE Certification, • OSHA 10 or OSHA 30, • Manufacturer Training CertificationsPhysical Requirements, • Lift and carry equipment up to 50 pounds., • Climb ladders and work at heights., • Work in varying weather conditions., • Stand, kneel, bend, and crouch for extended periods.What We Offer, • Competitive compensation, • Performance-based incentives, • Ongoing training and career development, • Company vehicle (where applicable), • Company-provided uniforms, • Paid holidays and vacation, • Opportunities for advancement within APEX General Inc.Core Values, • GSD, • Trustworthiness, • Humility, • ExcellenceAPEX General Inc. is committed to delivering reliable comfort solutions and exceptional service while building long-term relationships with our customers and communities. E04JI802fng34097prp

Job Description HVAC Service/Installer Tech Wanted VandenBerghe Construction is seeking an experienced HVAC Service/Install Technician to join the team. We specialize in multi-family apartment communities in the greater Fresno Area. HVAC Technician Duties and Responsibilities: • Travel to various properties as scheduled, • Determine resident’s concerns with their current HVAC system, • Inspect current HVAC systems for effectiveness and safety, • Perform necessary repairs and routine maintenance HVAC Technician Requirements and Qualifications: • Must have EPA Certification, • Proficient with manual and power tools, • Valid driver’s license and reliable transportation, • Reliable and self-motivated, • Must have own Tools Proof of COVID vaccination - will consider accommodations for disability and religious-based reasons Preferred Candidate with experience on: • Electrical, • Plumbing, • Swimming Pools, • Bi-Lingual VandenBerghe Construction is a very busy apartment maintenance company looking for an HVAC Service and Installer for full time position. We are a family-owned business that cares for their employees. We are looking for individuals who want to be the best in their field and can show up every day with a positive can-do attitude, we work with all our employees to provide the training they need to be the best.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: The Telecommunications Equipment Installer – Level III will provide detailed installation, removal, and maintenance of Data Center, Telecom and Wireless equipment which includes Transmission, Power, and Fiber systems with supervision. Core Responsibilities: • Be a part of installation teams at customer locations across the country., • Operate vehicles, hand tools, power tools, ladders, lifts, and test equipment., • Must have mastered installation skills per Telco Standard TP76300 and be able to perform all the duties of the Installer Level 3 or 2 with a high degree of competency and accuracy., • Must possess comprehensive equipment installation skills on a wide variety of installations and systems including AC/DC Power systems, low/high-density fiber systems, inside plant iron Infrastructure, and supervisory /alarm systems., • Must maintain cleanliness and organization of all storage, staging and work areas on-site., • Comprehensive level of understanding of all general company policies and practices, safety procedures, paperwork, and administrative requirements., • Ability to read, understand, and apply job/equipment specifications, installation documents, schematics. Specific duties may vary or evolve over time based on business and client needs. Core Experience: • Minimum 3+years installation experience or combination of experience and training as determined by company management., • Experience with AT&T Central Office installation practices a plus., • DC Power Installation experience a plus., • Ability to physically place, remove, or modify working and non-working equipment including the following:, • Cable trays and/or racking, • Data equipment cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, firewalls, • BDFBs and fuse panels, • Identify, label, measure, terminate and physically route the cables that supply AC and/or DC power or transmit data in various technical spaces., • Ability to apply common sense understanding to conduct instructions furnished in written, oral, or diagram forms., • Must have proficient laptop computer skills and experience with applications., • Excellent verbal and written communication skills., • MS Office (Outlook, Word, Excel, Teams) skills a plus., • Possess a knowledge of tools necessary to complete advanced assignments and installations., • Must have a valid driver's license and be able to pass all pre-employment background checks and must be insurable. Valid Passport a plus! Physical/Work Environment: At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • May be required to work in a raised floor environment. May be required to work in small crawl spaces and/or shaft ways. May be required to work in Telecom superstructure utilizing ladders and lifts., • Must be able to vertically lift 50lbs. Required to stand, walk, climb ladders, and crawl in tight spaces., • Fully understands all company/customer policies and procedures and safety requirements., • Travel required in your home region and in the US without restrictions. Ability to travel internationally is a plus. Expenses 100% paid by the employer. Road Warrior experience a plus! At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $28—$36 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Senior Electrical Project Manager Type: Direct Hire Location: San Francisco Bay Area, CA Salary: $160K–$190K per year, DOE About the Role We are partnered with a Northern California commercial and industrial electrical contractor to recruit a Senior Electrical Project Manager for this work. Lead the largest commercial and industrial electrical construction projects from turnover through closeout, based in Brentwood in the San Francisco Bay Area. Our client is a family-owned, merit shop electrical contractor in business for more than 25 years, with a growing backlog across the Bay Area, Central Valley, and Sacramento region. Its work spans distribution centers, manufacturing and food processing, healthcare and life sciences, data centers, and office tenant improvement (TI), delivered through both design-build and plan-and-spec contracts. The company carries a platinum-level industry safety award and treats safe execution as part of every project plan. This is a long-term seat for a Senior Electrical Project Manager who has owned complex electrical projects from both the financial and the field side, and who can develop the Project Managers and Project Engineers coming up behind them. You will carry the company's largest projects and its most important general contractor relationships. Key Responsibilities Project Delivery • Manage electrical construction projects from turnover through closeout, leading the company's largest and most complex work, • Own schedule, budget, cost forecasting, and procurement for each project, • Manage Requests for Information (RFIs), submittals, change orders, and contract compliance, • Drive safe, profitable, high-quality execution in the field Team Leadership • Coordinate Superintendents, Foremen, subcontractors, and vendors across concurrent projects, • Mentor Project Managers and Project Engineers Clients and Portfolio • Own client and general contractor relationships, including strategic accounts, • Support portfolio-level forecasting with company leadership Qualifications Required • 10+ years of electrical construction experience, • Commercial and/or industrial electrical construction background, • Strong financial management and cost forecasting skills, • Experience with Procore, Bluebeam, or related construction software Preferred • Senior Electrical Project Manager experience on distribution center, data center, healthcare, or industrial process projects, • Project Management Professional (PMP) certification, • Occupational Safety and Health Administration (OSHA) 30-Hour Construction training, • Working knowledge of the National Electrical Code (NEC) and California Electrical Code, • Merit shop electrical contractor experience Compensation & Employment Employment Type: Direct hire, full-time. The selected candidate will be hired as a full-time employee directly with our client. Salary: $160K–$190K per year, DOE Benefits: Medical, dental, and vision coverage; 401(k) with company match; paid time off and holidays; tuition reimbursement; and bonus opportunity Vehicle: Company vehicle, vehicle allowance, or mileage reimbursement, per company policy Work Model: Onsite at the Brentwood office, with regular jobsite visits. Relocation required if not a commutable distance from Brentwood, CA Travel: Jobsites across the Bay Area, Central Valley, and Sacramento region Innovation Consulting LLC is an equal opportunity employer and recruiter. We review candidates without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic.

Job Description Overview Function as a Journeyman for Bergelectric Corp.; installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential locations. This is considered to be a safety sensitive position. Responsibilities • Install, repair, maintain, and test commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives., • Use industry related hand tools and power tools., • Measure, cut, bend, thread, etc. and install wire and electrical cable systems, conduit systems and other wire raceway systems., • Feed to, pull into, and terminate wire and cable within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc., • Splice and terminate wires at junction points., • Troubleshoot equipment electrical systems and control circuits and build control panels from drawings., • Prepare sketches and schematic diagrams showing the location of wiring and electrical systems., • Delegate tasks and assist with training other employees., • Communicate effectively with Foremen and crew members., • Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met., • Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors., • Adhere to all Bergelectric Corp.’s safety policies and procedures. Qualifications • Must hold a current Journeyman Wireman license (if required by the applicable state, city or county)., • Ability to install power systems: lighting, fire protection, security, and data network., • Ability to build and install control panels and provide maintenance to systems., • Experience using Electrical Single Line blueprints., • Experience finding and repairing faults in electrical apparatus and circuits., • Ability to verify compliance and functionality of installations., • Experience helping with the management of a project and crew., • Ability to manage material estimates., • Demonstrate strong leadership and pre-planning abilities.

Job Description Sebastian is a premier provider of communications and construction services in California. With more than 70 years of experience, Sebastian is passionate about providing people with a great place to work. Our high growth and dynamic model offers employees the opportunity for career advancement. As a family company we value the expertise and experience of our team. Job Description: Journeyman Electrician will work on commercial and industrial construction projects (both private and public works). Electricians must be able to work in fast-paced environments while maintaining the accuracy and quality of their work. This position requires high technical expertise and attention to detail. Our work ranges from North Sacramento to the East Bay down into the Central Valley. Job Duties and Responsibilities: • Supervising subcontractors, apprentices, material handlers, • Planning and laying out jobs, • Providing project foremen with daily job performance updates, • Cutting, bending, threading and running electrical conduit materials, • Pulling electrical wiring through electrical conduit, • Terminating electrical panels, set fixtures, outlets and various electrical devices, • Install/connect wires to circuit breakers transformers, outlets or other components/systems, • Maintaining good working relationships with customers, • Monitoring safety in the field;, • Conducting regular safety meetings, • Completing regular reports and paperwork, • Handling claims and change orders, • Estimating time and scheduling Job Requirements: • Electricians must provide proof of CA Journeyman Electrician certification., • Proficient knowledge of electrical theory, the National Electrical Code, and local and state electric/ building codes required., • Electricians must have a clear understanding of lockout and tagout., • OSHA 10, scissor lift, reach lift, CPR, and first aid training is preferred., • Ability to visualize work, • Must be able to climb ladders, sit, bend, stoop, stand or walk for extended periods., • Must have minimal ability to squat, bend, kneel, twist, crawl, reach lift, balance, carry, push, and pull, • Must be able to lift up to 100 lbs., • Must be able to travel to job site locations, • Ability to work in extreme weather and temperature conditions. Compliance: • If you need an accommodation as part of the employment process, please contact Human Resources., • Equal Opportunity Employer, including disabled and veterans., • If you want to view the Pay Transparency Policy Statement, please click the link: English

Job Description If you want to be part of something bigger than just a job – make this career move and find exactly what you’re looking for. We keep on growing because we only hire the best, and our customers love us for it. We’ve been at this a long time here in Fresno. You’ve probably seen our trucks and our ads. What you don’t know is what it’s like to be a part of a team like this. How much you feel appreciated when you don’t cut corners. How much we inspire ongoing training and education. How much you can earn when you truly are the best. People often come to us looking for a job. They stay with us because they find a fulfilling career, room to grow, and opportunities to excel. Here at Allbritten, The Barefoot Plumber, you will work in a place where you will be appreciated by your team and customers, and where your work has a direct effect on the success of the company. If this sounds like you, spend a little time learning about Allbritten by visiting Allbritten.com. When you're ready, please follow the directions at Apply Today to apply for this position. In addition to a competitive salary and benefits package, we offer: • A culture that values hard work and reward results, • Medical Insurance -- we pay 65% of you and 70% of your family's insurance premiums for health., • 100% of your Life Insurance premium, • Low-cost dental and vision, • 401k Plan with up to 4% Match, • Paid PTO and paid holidays each year, • Weekly pay, • A family. This is last on the list because it’s most important. We care about our team and expect you to bring that same caring when you join. We do a lot more than just work together. You’ll come to love our company outings, and you’ll build life-long friendships at Allbritten. If you are passionate about helping people improve their homes, have a strong work ethic, and enjoy working both independently and as part of a team, we encourage you to apply. Please note that this role may require working in diverse and potentially uncomfortable indoor and outdoor environments. This is not the right fit for you if you are not looking for a long-term career or are unable to consistently demonstrate an exceptional work ethic, including excellent attendance. We value teamwork and those who enjoy working as part of a team will thrive in this role. JOB SUMMARY Allbritten The Barefoot Plumber is expanding its services and is looking for a motivated and skilled Electrical Sales & Service Technician. This role is ideal for a dynamic individual who combines technical expertise with exceptional customer service and sales abilities. The Electrical Sales & Service Technician will be responsible for diagnosing, repairing, and selling electrical services and products to residential and light commercial customers. DUTIES & RESPONSIBILITIES: • Electrical Service & Repair:, • Perform diagnostics, maintenance, and repairs on electrical systems and components., • Troubleshoot electrical issues and provide efficient, effective solutions., • Install, upgrade, and maintain residential and light commercial electrical systems, including wiring, panels, fixtures, and appliances., • Ensure all work meets or exceeds local electrical codes and safety standards., • Sales & Customer Relations:, • Provide professional, courteous, and knowledgeable service to customers., • Conduct thorough electrical system assessments and present findings to customers., • Recommend and explain electrical products and services to meet customers' needs, promoting additional services and upgrades., • Close sales by building trust and effectively communicating the value and benefits of Allbritten’s services., • Customer Service Excellence:, • Act as a trusted advisor, ensuring customer satisfaction through high-quality service and follow-up., • Address customer concerns promptly and effectively, providing solutions and support., • Maintain strong, positive relationships with customers, fostering repeat business and referrals., • Safety & Compliance:, • Adhere to company safety policies and OSHA regulations at all times., • Ensure the proper use of safety equipment, tools, and procedures., • Maintain a clean and safe work environment, both on-site and in company vehicles., • Technical Expertise & Development:, • Stay updated on industry trends, tools, and techniques to provide the best service possible., • Participate in ongoing training and professional development opportunities provided by the company., • Share knowledge and expertise with team members to promote a culture of continuous improvement., • Administrative Duties:, • Document all work performed, including diagnostics, repairs, and sales, using the company’s service software., • Manage inventory of tools, parts, and supplies, ensuring availability for upcoming jobs., • Collaborate with the Electrical Service Manager to ensure efficient scheduling and job prioritization. REQUIRED SKILLS AND DESIRED SKILLS • Must have own tools., • Comfortable working directly with consumers in their home, • Comprehensive knowledge of electrical systems, wiring, and safety protocols., • Ability to use Company-furnished technology, • Strong interpersonal & communication skills, • Face to face interactive sales experience is ideal, • Can engage with their co-workers and are able to collaborate with their team to achieve goals., • Multi-task oriented., • Experience with Service Titan or other service-based management systems is ideal., • Detailed and Goal orientated with a strong desire to succeed., • Excellent customer service skills, • General construction knowledge., • Electrical Sales EDUCATION & EXPERIENCE • High School Diploma and/or GED certificate; or equivalent; additional technical training or certification is highly desirable., • Minimum of 2-3 years of experience as an electrical service technician., • Valid Driver’s License and must be insurable. PHYSICAL DEMAND: • Push/pull up to 75Lbs., • Ability to kneel for up to 8 hours., • Ability to lift up to 75 Lbs., • Ability to squat consistently., • Ability to consistently twist, stoop, bend/crouch, crawl, and reach., • Ability to sit up to 8 -10 hours., • Ability to stand up to 8 -10 hours, • Repetitive hand, wrists, arm and leg motion PAY SCALE: • $20.00 - $35.00 per hour; with an incentive pay based on individual’s performance up to 18% (calculated by the difference of hourly and incentive pay) WORK ENVIRONMENT: • Field, • Working in private residences as well as some commercial, • Exposure to hazardous conditions, such as high voltage and heights, may occur while performing the duties of this job, the technician will be exposed to:, • Excessive heat/cold, inside/outside work, excessive noise, body mechanic repetitious, work, • Varies weather conditions (wet/dry surfaces), dust/debris, and confining areas of a home for short period of time., • May be exposed to fumes or airborne particles and vibrations., • Occasionally exposed to moving mechanical parts and risk of electrical shocks, • Some products can expose you to chemicals including, but not limited to: Asbestos, Carcinogens, Phosgene Gas, Toxic Substances, which is/are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. WORK SCHEDULE • Mon – Fri.; 7:00am – 5:00PM / Weekends as needed EQUAL OPPORTUNITY EMPLOYMENT STATEMENT Allbritten is an Equal Opportunity Employer (EOE) and is committed to creating a diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, protected veteran status, or any other personal characteristic protected by Federal, State, or Local Laws. Powered by JazzHR EMYmxK11qR

Job DescriptionJob Description: Trailer Maintenance Shop Mechanic Position Type: Full-Time Department: Maintenance Shop Reports To: Shop Supervisor/ Fleet Manager Position OverviewThe Trailer Maintenance Shop Mechanic is responsible for inspecting, diagnosing, servicing, and repairing commercial semi-trailers and heavy-duty transport equipment. The primary focus isto ensure the trailer remains safe, highly reliable, and fully compliant with Department of Transportation (DOT) and Federal Highway Administration(FHWA) regulations. Core Responsibilities • Preventative Maintenance {PM): Perform routine safety checks, scheduled maintenance, and lubing on brakes, suspension, axles, and landing gear systems., • Diagnostics& Repair: Troubleshoot and repair electrical wiring, lighting systems, ABS brakes, air lines, and hydraulic components., • Structural & Body Work: Repair or replace damaged flooring, rub rails, aluminum body panels, roofs, and doors using welding and fabrication equipment (MIG/Stick)., • Compliance & Safety: Conduct comprehensive DOT inspections and document all findings, parts used, and repair hours accurately within the shop management system., • Shop Cleanliness: Maintain a safe, clean, and organized workspace, adhering strictly to OSHA and company safety guidelines. Key Qualifications& Requirements, • Experience: 1 to 5+ years of hands-on mechanical experience working on heavy-duty commercial trailers, medium/heavy trucks, or equivalent vocational training., • Technical Skills: Strong proficiency using hand tools, power tools, jacks, torches, and welding/cutting equipment. Ability to read electrical and air system schematics., • Physical Stamina: Ability to lift up to 50- 75 lbs regularly, bend, kneel, crawl, and stand for extended periods

Job Description Technician III/Heavy-Duty Diesel Mechanic We’re hiring an experienced Technician III / Heavy-Duty Diesel Mechanic to maintain and repair our company-owned fleet of Class 4–8 diesel and CNG vehicles and heavy equipment. If you’re an experienced Diesel Technician, Fleet Mechanic, Truck Mechanic, Heavy Equipment Mechanic or Field Service Technician with strong diagnostic and troubleshooting skills, we want to hear from you. What You’ll Do Perform preventive, routine, and emergency maintenance on Class 4–8 diesel and CNG trucks and heavy equipment, including on-site repairs and road calls Diagnose and repair mechanical, electrical, hydraulic, airbrake, steering, and suspension systems Use diagnostic tools and manufacturer software, including Dossier, Cummins INSITE, and PACCAR DAVIE4 Review Driver Vehicle Inspection Reports (DVIRs) and complete necessary repairs Perform welding and fabrication as needed Accurately document repairs, parts used, and labor time Identify and communicate repair needs and safety concerns Maintain a clean, organized, and safe work environment Support fleet uptime and participate in ongoing technical training Wash or detail equipment when needed What You’ll Bring Required: High school diploma or GED 5+ years of hands-on mechanical experience OR equivalent technical certifications Experience maintaining and repairing Class 4–8 vehicles and heavy-duty equipment Proficiency with diagnostic software, diagnostic equipment, power tools, and shop equipment Valid Class C Driver’s License Ability to work outdoors in varying weather conditions and follow established safety procedures Strong communication and problem-solving skills Ability to meet the physical demands of the position, including frequent walking, reaching, bending, lifting, and operating tools and equipment Preferred: Class A or B Driver’s License Solid waste or transportation industry experience Welding experience and/or certification Benefits Opportunities for overtime based on operational needs Medical, Dental & Vision Insurance 401(k) with Company Match FSA with Employer Contribution Life & AD&D Insurance, with supplemental options Paid Time Off, Holidays & Paid Sick Leave Employee Discounts & Wellness Programs Training & Career Growth Opportunities Community Engagement Opportunities Starting Pay: $34.00 per hour, plus overtime Starting pay within the posted range will be determined based on the candidate’s relevant experience and qualifications. Regular overtime is part of this position and is paid at applicable overtime rates. Keep Our Fleet Moving Bring your experience and technical skills to a team that depends on safe, reliable equipment every day. Apply today and help keep our fleet—and our communities—moving.

Job Description RY-DEN Isuzu Truck Center of Fresno, California is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description POSITION: Heavy Equipment/Class 8 Truck Mechanic, B LOCATION: Fresno, CA REPORTS TO: Fleet Maintenance Manager SALARY: $25.00 to $32.00/ per hour, DOE COMPANY OVERVIEW: Caglia Environmental is a family-owned and operated company with a proud legacy of over 80 years in the Central Valley. We provide essential environmental services, including recycling, waste collection, and landfill management, with a strong commitment to sustainability, innovation, and community. Our team plays a vital role in helping to build cleaner, greener communities, and we're always looking for motivated individuals who want to make a meaningful impact through their work. BASIC FUNCTIONS: Maintain Heavy Equipment & Over the road Truck fleet. Ensure that equipment meets all safety and regulatory requirements before releasing into service. Assist with all daily fleet maintenance activities, and all other assigned duties. PRINCIPAL DUTIES & RESPONSIBILITIES: • Works with Fleet Manager and Leadman to determine daily workload., • Performs daily routine and repair maintenance on heavy landfill equipment, garbage collection vehicles, and satellite collection trucks., • Assists with maintaining a clean and orderly parts and materials inventory., • Communicates repair issues with Fleet Manager and/or Lead man in a timely manner., • Complies with all maintenance and facility rules, regulations, policies, procedures., • Reports any unsafe working conditions and/or practices., • Ensures work areas and equipment are kept neat, clean, and orderly each day., • Attends all safety training and meetings as required for all shop and facility employees., • Able to complete and submit all required daily reporting/paperwork to management in a timely manner., • Performs general maintenance of company buildings and facilities., • All other special projects, implementations, and tasks as assigned. CORE COMPETENCIES • Set high work standards and motivate others, • Ability to communicate with management, • Focus on safety, quality, timely repairs, and attention to detail., • Use of technical and professional knowledge and acquired skills REQUIRED QUALIFICATIONS (SKILLS, EDUCATION AND EXPERIENCE) • High School Diploma, • Minimum 3-years related maintenance experience, • Ability to utilize engine, transmission & other diagnostic software, • Ability to utilize maintenance tracking software, • Trouble shot & repair electrical components, • Repair steering & suspension systems, • Preform minor transmission & engine repairs, including tune-ups, • Preform PM inspections & repairs, • Ability to pass a random drug screen, • Ability to read and write English, • 2 or more years hydraulic experience PREFERRED QUALIFICATIONS • ASE Certifications a plus, • ASE Air Brake a plus, • Valid Class A or B Drivers License with clean driving record, • Welding Certificate a plus, • 2 or more years MIG and or stick welding experience

Job DescriptionPosition Overview As a System Assembler, you will play a vital role in the System Assembly Department by assembling water separator systems that include water separators, pumps, and control panels. This position requires mechanical aptitude, attention to detail, and the ability to read and interpret technical drawings. If you are passionate about hands-on work, take pride in producing high-quality equipment, and enjoy contributing to a team environment, we encourage you to apply. Job Responsibilities • Assemble complete water separator systems, including water separators, pumps, valves, piping, and control panels., • Interpret and follow manufacturing drawings, wiring diagrams, and assembly instructions., • Use hand tools and power tools to build and test system assemblies to meet performance specifications., • Perform basic electrical wiring for control systems and pump installations., • Conduct quality checks to ensure assemblies meet required standards., • Troubleshoot and resolve mechanical or electrical assembly issues., • Maintain a clean and organized work area., • Collaborate with engineering and production teams to ensure timely and accurate builds., • Follow all safety procedures and maintain a safe working environment.Job Requirements, • 2 years of experience in mechanical or electrical assembly or a related field is prefered., • Ability to read and understand technical drawings, schematics, and wiring diagrams is a plus., • Familiarity with pump systems, plumbing, and electrical control components is a plus., • Strong attention to detail and commitment to product quality., • Ability to work independently and within a team environment., • High school diploma or equivalent; vocational or technical training is a plus.Physical Requirements, • Ability to safely perform all essential job duties., • Lift and carry up to 50 pounds and perform tasks involving bending, stooping, pushing, and pulling., • Stand for extended periods during work shifts.

About us \n Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. \n \n For more than 140 years, Johnson Controls has delivered performance where it really matters. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward. \n \n What you will do \n As a critical part of the team, the Commercial Installer works onsite with our commercial customers to set up and program their Integrated Security fire and security systems. The Commercial Installer also dismantles and reconstructs equipment when necessary. \n \n How you will do it \n\n • Installs appropriate devices; dismantles and reconstructs equipment as required by customer or Tyco Integrated Security. \n, • Works safely and responsibly to avoid injuries, damage to property, loss of unused materials and cleans up installation debris.\n, • Contacts customers prior to the date of scheduled installation to verify schedule.\n, • Prepares estimates in accordance with prescribed instructions or directions of supervisor.\n, • Follow proper schematic wiring diagrams and hook-up procedures.\n, • Tests operation of system to the signal-receiving center to properly establish service.\n, • Reads building, electrical and sprinkler blueprints as required.\n, • Coordinates installations with police/fire departments and handles necessary records for notification of emergency calls.\n, • May manage installation teams on larger projects.\n, • Coach and mentor less experienced installers. \n\n \n What we look for \n\n • A high school diploma or GED\n, • Some technical school training is a plus. \n, • 4+ years electrical and electronic equipment experience with demonstrated mechanical aptitude.\n, • Ability to read blueprints and schematic drawings.\n, • Ability to operate hand and power tools.\n, • Ability to operate fleet vehicle in a safe manner at all times.\n, • Ability to communicate and provide excellent customer service. \n\n \n Who we are \n Johnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou. \n \n HIRING HOURLY RANGE: $26.92 - $33.65(Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the \n Johnson Controls Careers site at https://jobs.johnsoncontrols.com/about-us

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Employee discounts, • Opportunity for advancement, • Training & development Company Overview: Body20 is a leader in the wellness and fitness industry, specializing in Electro Muscle Stimulation (EMS) technology. EMS is an innovative fitness method that enhances muscle activation through electrical impulses, allowing clients to achieve their fitness goals more efficiently and effectively. Our mission is to empower individuals to transform their health journeys through personalized coaching and advanced technology. Join our Fresno team and help inspire others to thrive! Position Overview: As a Fitness Coach specializing in EMS technology at Body20, you will play a crucial role in guiding clients through tailored fitness programs that utilize the benefits of EMS. In addition to EMS training, our studio offers Tone, a signature class blending Pilates, barre method, and yoga — so we're looking for a coach who can bring a Pilates-informed approach to both our EMS sessions and our Tone programming. Your passion for health and wellness will motivate clients to reach their goals and thrive in their fitness journeys. Key Responsibilities: • Provide one-on-one coaching and support, creating personalized fitness programs that incorporate EMS technology., • Lead and support our Tone class, blending Pilates, barre, and yoga principles to build strength, flexibility, and mind-body connection., • Educate clients on the benefits and application of EMS, ensuring they understand how it enhances their workouts., • Monitor client progress and adjust programs as needed to maximize results., • Foster a positive and motivating environment that encourages clients to achieve their fitness goals., • Conduct fitness assessments and track client metrics to measure progress., • Participate in community events to promote Body20 and engage with the wellness community., • Collaborate with team members to enhance the overall client experience.Qualifications:, • 2+ years of experience in fitness coaching or personal training; EMS training experience is a plus., • Pilates background and hands-on teaching experience required; Pilates certification (e.g., PMA-certified, mat or reformer) strongly preferred., • Experience with barre and/or yoga instruction is a plus., • Strong passion for health, fitness, and helping others thrive., • Excellent communication and interpersonal skills., • Ability to inspire and motivate clients of all fitness levels., • Flexibility to work evenings and weekends as needed., • Willingness to learn and adapt to new technologies, particularly EMS.

Job Description Overview: Adecco Staffing is currently seeking dependable and skilled Maintenance Technicians for a Warehouse Distribution Center in Fresno, CA. This full-time position offers competitive pay between $28.00 and $30.00 per hour, with a 3rd shift role 7pm-3:30am this role, you’ll be responsible for equipment maintenance, troubleshooting, and general facility upkeep to ensure smooth plant operations in a fast-paced environment. Key Responsibilities: Perform maintenance and repairs on processing machinery and support equipment Conduct preventative maintenance and safety inspections Troubleshoot mechanical, electrical, pneumatic, and hydraulic systems Maintain tools, inventory, and work areas in safe, organized condition Support ammonia refrigeration systems and update PSM/PM records Complete work orders accurately and on time Follow all company safety protocols and PPE requirements Communicate maintenance issues clearly across departments Assist with building and facility repairs as needed Other duties as assigned Qualifications: High school diploma or GED required 1–3 years of experience in industrial or facility maintenance Technical training or certification in related fields preferred Hands-on experience with welding, basic electrical Comfortable lifting up to 50 lbs occasionally Pay Details: $28.00 to $30.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Key Responsibilities • Preventative & Emergency Maintenance: Perform scheduled preventative maintenance (PM) and rapid emergency repairs across production equipment, including:, • Mitsubishi laser cutting machines and associated chillers, • Press brakes, tube benders, plate rollers, and angle rollers, • Plate burning tables and welding equipment, • Powder coating ovens, • Blast booth systems (steel grit recovery, augers, bucket elevators), • Jib cranes, overhead hoists, and industrial air compressors, • Hand tools and shop equipment, • Electrical Troubleshooting & Repair: Safely diagnose, service, and maintain electrical distribution systems, including 460V 3-phase systems and 110V single-phase control circuits and panels., • Mobile Equipment Maintenance: Conduct routine mechanical and electrical servicing, inspections, and repairs on fleet forklifts (propane and diesel powertrains)., • Vendor & Contractor Collaboration: Serve as the primary internal technical contact for third-party service providers contracted for specialized CNC and laser system servicing; assist and coordinate with external technicians during major overhauls or warranty work., • Documentation & Compliance: Maintain accurate, up-to-date PM logs, work orders, parts inventory records, and safety documentation., • Shop Safety: Comply with OSHA regulations, Lockout/Tagout (LOTO) procedures, and company safety standards at all times. Qualifications & Requirements • Experience: Minimum 2-4 years of industrial maintenance or mechanical repair experience, preferably within a heavy manufacturing, steel fabrication, or CNC machining environment., • Electrical Competency: Demonstrated hands-on experience troubleshooting both single-phase (110V) and three-phase (up to 460V) industrial electrical systems., • Mechanical & Hydraulic Proficiency: Strong understanding of hydraulic motors, pumps, pneumatic systems, mechanical drives, augers, and gearboxes., • Forklift Mechanics: Proven ability to service and maintain diesel and propane mobile equipment., • Organizational Skills: Diligent record-keeping habits with the ability to track work orders and preventative maintenance paperwork systematically., • Certifications (Preferred): Forklift operator/mechanic certification, industrial electrical training, or relevant vocational credentials.\nCompany Description Spherion is a staffing leader with local roots and a passion for placing the right person in the right job. Spherion is a staffing leader with local roots and a passion for placing the right person in the right job.

Job Description Are you a skilled Commercial Maintenance Technician? We are hiring Commercial Maintenance Technicians to perform maintenance and remodel work for national restaurant and retail chains. Our technicians work, allowing projects to be completed without disrupting customer operations. Our company has been serving major retail and restaurant brands since 1982, and we’re known for providing stable, long-term careers with opportunities for advancement. If you have experience working in commercial maintenance, restaurant maintenance, or retail build-outs, this is an excellent opportunity to join a growing company with steady work and a company vehicle. What You'll Do As a DAY Shift Maintenance Technician, you will complete repairs, upgrades, and maintenance projects in restaurant and retail locations. Typical work includes: • Tile replacement and repair, • FRP installation and wall panel repair, • Cabinet replacement and installation, • Basic electrical work and fixture installation, • Commercial appliance installation (refrigerators, pastry cases, etc.), • Door sealing and weather stripping, • Faucet replacement and light plumbing repairs, • Commercial pressure-assist toilet repairs, • Drywall repair and patching, • T-bar ceiling and ceiling tile replacement, • Interior painting and general maintenance Schedule • Nightly start times vary depending on project location, • Full-time hours with steady work What We're Looking For ✔ Experience in commercial maintenance, restaurant maintenance, or retail construction ✔ Strong multi-trade repair and installation skills ✔ Ability to work independently during overnight projects ✔ Professional and reliable work ethic ✔ Valid driver’s license and clean driving record Why Join Us ✔ Company Vehicle Provided ✔ Stable company – operating since 1982 ✔ Work with major national restaurant and retail brands ✔ Consistent full-time work ✔ Opportunities for advancement and promotion \nCompany Description Go-Staff, Inc. is a family owned and operated full-service staffing company serving all of Southern California. We excel at placing job seekers in positions that are right for them, and we help employers in a wide variety of fields find talented employees that meet their needs. We have a remarkably high success rate in placing the right person in the right job. What’s our secret? We go out of our way to make personal connections to find the right staff right now. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Go-Staff, Inc. is an equal opportunity employer. All decisions regarding recruiting, screening, hiring, training, promotion, transfer, pay, training, benefits, and other conditions of employment will be made based on valid job qualifications and business reasons. All such decisions will be made without discrimination due to any characteristic or condition (including, but not limited to, criminal history) protected by federal, state, or local law. Arbitration is a condition of employment. Arbitration is a condition of employment Go-Staff, Inc. is a family owned and operated full-service staffing company serving all of Southern California. We excel at placing job seekers in positions that are right for them, and we help employers in a wide variety of fields find talented employees that meet their needs.\n\nWe have a remarkably high success rate in placing the right person in the right job. What’s our secret? We go out of our way to make personal connections to find the right staff right now.\n\nWe are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.\nGo-Staff, Inc. is an equal opportunity employer. All decisions regarding recruiting, screening, hiring, training, promotion, transfer, pay, training, benefits, and other conditions of employment will be made based on valid job qualifications and business reasons. All such decisions will be made without discrimination due to any characteristic or condition (including, but not limited to, criminal history) protected by federal, state, or local law. Arbitration is a condition of employment.\nArbitration is a condition of employment

Job DescriptionDescription: POSITION: ASSOCIATE SALES ENGINEER (NEW EQUIPMENT) CLASSIFICATION: FULL-TIME / EXEMPT LOCATION: FRESNO REPORTS TO: VP SALES / VP ENGINEERING Summary/Objective: The Associate Sales Engineer – New Equipment will work closely with the R.F. MacDonald Co. New Equipment Sales teams, inclusive of vendors and customers. The successful candidate must be organized and work proactively within the Sales process and operations of RFM. This position identifies potential clients, maintains pipeline and order reports, and updates prospect lists. In addition, the role involves assisting the sales team and providing essential support for effective sales operations. The individual will be required to research best practices in customer service and sales support functions. Tracking developing trends, as well as analyzing and interpreting sales metrics against team goals is essential in the position. Performs other related duties as required and assigned. Essential Functions: The following reflects management’s definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons. • Making equipment selections based on customer needs, • Developing quotations and project specifications and submittals, • Working with and developing 2D and/or 3D drawings, • Reading construction plans and doing takeoffs, • CRM data entry, • Proficiency with Cleaver-Brooks Powerup and Configurator, Taco’s BuyTaco and Project Builder, and similar systems and quoting procedures for R.F. MacDonald vendors., • Respond to customer and prospect inquiries with assistance and oversight of outside sales engineer., • Assist the sales team in following up on sales opportunities., • Monitor project status and equipment ship dates to ensure excellent customer service and customer experience., • Participate in ride-along's, job walks, lunch & learn presentations, and customer meetings/visits with sales team., • Following up with clients upon job completion to provide start-up reports, IOM’s and close-out packages., • Participate in sales and operations meetings, tradeshows, and sales processes. Assist with job/tradeshow setup as needed., • Manage sales tracking tools and sales data for the team, as well as analyzing sales trends., • Assist in the preparation and organizing of promotional material or events, • Develop sales opportunities by researching and identifying target accounts with assistance and oversight of outside sales engineer., • Helping the sales team develop leads by contacting potential clients via phone or email to generate interest in the company’s products or services., • Routing qualified opportunities to the appropriate sales executives for further development and closure, • Maintaining in-depth knowledge of the company’s products or services and competitors’ offerings to support sales team with their efforts, • Providing customer support by answering questions about products or services, pricing, order status, delivery options, return policies, etc., • Coordinating with other departments such as accounting or shipping to ensure that customer orders are processed quickly and accurately, • Working in teams to accomplish a common goal, • Excellent communication skills both verbal and written, • Strong people and customer service skills in a professional setting, • Strong Microsoft skills and knowledge including Manufacturer sizing programs and AutoCad, • Ability to work independently and efficiently and perform with minimal supervision., • Ability to apply knowledge to customer’s current and future needs., • Ability to multi-task., • Ability to produce detailed but concise quotations pertaining to customer requirements, • A valid driver's license is required. Must be insurable with no major infractions. Job will require some travel.Requirements:, • Inside sales support with mechanical piping and/or electrical experience., • Some experience in administrative support positions, • Ability to work and travel in office or field/jobsite setting as needed., • Proficient in Microsoft Office Software (Excel, Word, PowerPoint) and accounting or sales software systems., • Good computer and software systems skills and experience, • Ability to enter data in multiple system platforms and pull reports (w/ use of queries, datamining, etc.), • Ability to perform diversified business functions and working knowledge of administrative and sales procedures., • Well organized and responsible; ability to switch between duties efficiently, • Communicate proficiently in English, with good verbal and communication skills; communicate well with internal staff & management, as well as externally with customers, • Excellent verbal and written communication skills., • Must be able to work in a team environment, • Must be able to multitask within daily work projects and scopes., • Ability to meet deadlines and/or targets, • Must be adept at handling pressure and working under stress, • Must be self--motivated and driven, • Professional appearance and demeanor, • Excellent attendance and promptness a must. Required Education and Experience · B.S. in Mechanical Engineering. · Two years related experience preferred. · Inside sales experience in industrial or commercial fields preferred. Supervisory Responsibility This position has no direct supervisory responsibilities. Work Environment This job operates in a professional office environment with some offsite field exposure. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. This job operates in a professional office environment. Much of the role will take place at a desk on a computer. An ergonomic chair will be provided. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a deskbound role; however, filing, correlating, reproduction and binding materials are required. This would require the ability to lift files, open filing cabinets, bend or stand on a stool, climb stairs, and prepare training and meeting rooms/spaces as necessary. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5:00 p.m. This position regularly requires long hours and occasional travel work as job duties demand. Travel Travel may be required for this position to customer and RFM sites with out-of-area and possible overnight travel expected. Other duties: Please note, this job description is not a comprehensive listing of activities, duties or responsibility that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionBenefits: • Company parties, • Employee discounts, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Training & development Transform Lives. Build a Career. Join BODY20. Are you passionate about health and wellness? Do you thrive in a fast-paced, community-driven environment? As a BODY20 Sales Associate, you’ll be part of a dynamic team, helping studio members achieve their fitness goals while building lasting relationships within the community. This is your chance to grow personally and professionally in the fitness industry, with a company that’s redefining what’s possible in a workout! Why Join Us? • Career Growth: Get started with comprehensive paid training. Unlock opportunities for advancement in fitness and business leadership., • Rewarding Compensation: Competitive base salary, exciting commissions, and performance bonuses., • Perks & Recognition: Enjoy a complimentary Studio Membership, exclusive discounts, and recognition for your achievements., • Fun, Passionate Environment: Join a team that values collaboration, passion, and personal development—all while rocking fitness casual attire.Your Role, • Community Engagement: Represent BODY20 at local events and build partnerships that promote our brand and values., • Relationship Building: Grow the studio’s member base by connecting with prospects, providing exceptional service, and ensuring a smooth onboarding experience., • Team Player: Collaborate with your team to create a welcoming environment, support studio goals, and deliver best-in-class customer experiences.What You Bring, • Exceptional Communication Skills: You’re a natural at both verbal and written communication, able to engage members and foster connections., • Energetic & Personable: You radiate enthusiasm, positivity, and a genuine passion for health and fitness., • Organized & Proactive: Your strong follow-up and organizational skills help ensure smooth processes and satisfied members.About BODY20 At BODY20, we’re revolutionizing the fitness industry with Electro-Muscle Stimulation (EMS) technology, delivering results in 20 minutes that would typically take hours at a traditional gym. With up to 150 times more muscle contractions than conventional workouts, we help people maximize their time and achieve their fitness goals without sacrificing their lifestyle. At BODY20, we believe: • Fitness and family time shouldn’t be mutually exclusive., • Your workout should complement your career, not compete with it., • Getting in shape shouldn’t hurt., • Everyone deserves to feel great and get the most out of life.Who Are We? Most people know you only use 10% of your brain. But most don’t realize you only use 30% of your body. BODY20® is here to change that. By combining personalized one-on-one training with body gear that sends electrical impulses into the deep tissue of your body’s muscles the way your brain does BODY20® helps every body workout to 100%. OUR CODE At BODY20, we live what we believe. That you shouldn’t have to choose between fitness and family time. That fitness should never compete with career. That getting in shape shouldn’t hurt. That everybody should get the most out of life, and everybody is entitled to feel great. We believe in FITNESS EQUALITY. If you are:, • a passionate, positive and detail-oriented person that can talk to anyone, • someone who enjoys teamwork and wants to be a part of a world class fitness companyThen you’re probably the right person for us! Because we are:, • all about fun, exciting and rewarding experiences for our team members, • expanding rapidly around the country, • looking for successful and motivated people who what to improve themselves and their career

Job Description Overview Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as an Assistant Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR ASSISTANT MECHANICS DO Our Assistant Mechanics are essential to maintaining the top performance of our lanes, pinspotters/pinsetters, and building equipment. They skillfully conduct preventative maintenance and respond promptly to any necessary repairs. AN ASSISTANT MECHANIC’S DAY-TO-DAY: • Always prioritize safety by following the guidelines set by Lucky Strike Entertainment and OSHA., • Take pride in maintaining the equipment to ensure it is in optimal working condition., • Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed, • Embrace the opportunity to complete the Lucky Strike Entertainment Assistant Mechanic training program within the prescribed time frame., • Providing valuable assistance to the leadership teams and promptly reporting any issues and problems as needed., • Proficient in accurately identifying and resolving the most common issues with equipment., • Minor preventative maintenance, • Fully understand how to operate all bowling equipment in the center WHAT IT TAKES • High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional), • Excellent communication skills, • Proven team player, • Eager to continue training to advance into a Mechanic role., • Candidates with previous mechanical, electrical, or engineering experience are encouraged to apply PERKS (MORE REASONS YOU’LL LOVE YOUR JOB) • Free Bowling!, • $1 Arcade Play, • 20% off Events, • 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: • Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Responsibilities Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world’s premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $18.00 to $21.00 / hour. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: www.bowlerocorp.com/careers/benefits

Job Description Daniels Health is seeking a versatile Traveling Facilities Technician to support facility and plant operations across a growing multi-site footprint. This role handles a wide range of general building maintenance and light repair work, including minor carpentry, electrical, plumbing, painting, and fixture work, needed to keep Daniels Health locations safe, clean, and fully operational. The Traveling Facilities Technician also supports capital construction and equipment installation projects, including Autoclaves, Wash lines, Compactors, and boiler rooms, led by the General Contractor, handling site preparation, punch-list, and finish work alongside licensed trades. This is a full-time, W2 position requiring travel to project sites approximately 50% of the time, with flexibility to support day shift and, where needed, 2nd shift coverage. What you will do General Maintenance & Repair • Perform general building maintenance and repairs, including drywall patching, painting, doors, locks, hardware, ceiling tiles, flooring, and fixtures across Daniels Health facilities., • Complete minor electrical tasks (replacing lights, switches, and outlets) and minor plumbing tasks (faucets, toilets, drains, and fixtures) within the limits of applicable licensing rules., • Assemble, install, and repair furniture, shelving, signage, safety equipment, and wall-mounted items., • Carry out preventative maintenance checklists and respond to work orders that affect plant uptime, safety, or building operations. Capital Project & Installation Support, • Support site preparation, demolition, cleanup, and punch-list work for Autoclave, Wash line, Compactor, and boiler room projects., • Work alongside the General Contractor, electricians, plumbers, carpenters, and subcontractors to keep project scopes on schedule., • Read basic drawings, work orders, and equipment specifications to guide assigned tasks., • Stage materials, tools, and equipment so trades can work efficiently on site. Multi-Site Travel & Coverage, • Travel to multiple sites (approximately 50%) across assigned regions: Midwest, East Coast, Florida, and Texas, with priority coverage in California, Texas, Florida, and Georgia to complete repairs and support maintenance and installation projects., • Maintain flexibility to support day shift and, where needed, 2nd shift coverage based on site needs., • Transport, maintain, and account for tools, materials, and equipment between job sites. Cross-Functional Collaboration, • Partner with Plant Managers, the General Contractor, and maintenance stakeholders to prioritize repairs and improve facility condition., • Provide regular updates to the Head of Infrastructure, Plant Manager, and General Contractor on job progress, material needs, and site conditions., • Identify issues that require a licensed electrician, plumber, or HVAC technician and escalate them promptly., • Ensure minimal disruption to ongoing facility operations during repair and maintenance work. Safety & Compliance, • Complete all work in compliance with OSHA, local building codes, and internal safety standards., • Follow lockout/tagout, ladder, fall-protection, and safe power-tool procedures, whether working independently or alongside subcontractors., • Stay within the scope permitted for unlicensed work in each state and refer licensed-trade work to the appropriate professional. What we are looking for • 3+ years of general maintenance or handyman experience in commercial, industrial, manufacturing, or multi-site facilities environments., • Working skills across multiple trades, including minor carpentry, drywall, painting, basic electrical, and basic plumbing., • Proficient with hand tools, power tools, and basic diagnostic tools., • Familiarity with capital construction or equipment installation projects (e.g., autoclaves, wash lines, compactors, boiler rooms) preferred., • Ability to read work orders, basic drawings, and technical specifications., • Strong practical judgment and a solution-focused approach., • Ability to travel up to 50% consistently, including priority regions (CA, TX, FL, GA)., • Flexibility to support day shift and, where needed, 2nd shift coverage., • High school diploma or equivalent; trade-school or vocational training preferred., • Valid driver’s license in good standing and ability to travel by air and ground., • Ability to pass background check/drug screening as required., • OSHA 10-Hour Safety Certification required., • EPA 608 certification, aerial/scissor lift, or forklift training a plus., • State or local handyman registration where required by jurisdiction.Why work for us, • Job Stability – As an essential service to healthcare, Daniels Health is non-seasonal and recession-proof, • Comprehensive Benefits – Medical, Dental, and Vision Insurance effective on Day One; Paid Short-Term Disability; Company-sponsored Life Insurance; Voluntary Long-Term Disability and Accident Insurance, • 401K Matching Plan – 50% employer match on up to 6% contribution (up to 3% employer contribution) with a 5-year vesting schedule and no waiting period on the match, • Permanent Position – Full-time, 40 hours per week with long-term career potential, • Mission-Driven Work – Be part of a company that’s making healthcare safer and more sustainable through innovative waste management solutions, • Growth & Development – Opportunities to expand your skills in leadership, data analysis, and cross-functional collaboration within a supportive and evolving organization If you're looking for a stable, mission-driven role where your leadership makes a real impact, we’d love to hear from you. At Daniels Health, you’ll be part of a team that values safety, innovation, and people. Apply today and take the next step in your career with a company that’s transforming healthcare waste management for good. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Overview Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Factory Location: Fresno, CA Compensation: $33.00 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: Monday - Friday / (Saturday Rotation as needed) Shifts based on availability and business needs Ability to work holidays and weekends per business needs Responsibilities Restoring machine to operating conditions during machine runtime failure in a team setting Complete reactive maintenance on production lines to recover from equipment failures by repairing mechanical, electrical, and structural components Create retrofits and fabrication, complete machine tear down/repair and assembly and work on PLC’s, VFD’s, and electric motors Conduct creative problem solving to identify and perform equipment improvements Participate in special project work on equipment upgrades or installations Work with team members and operators to ensure the daily production schedule is met Plan, lead and execute preventative maintenance (PM) according to PM schedule to minimize equipment downtime Maintain partnerships with team members and vendors using effective communication Provide break relief to production operators or team members as needed Operate a forklift as needed to complete duties Qualifications High school diploma or GED; additional technical training or certifications desired 3 or more years of previous experience in an industrial manufacturing maintenance environment Demonstrated sense of urgency in completing tasks and comfort working in a high-speed production environment Strong mechanical and electrical skills; PLC experience a plus Solid computer skills, including the use of Word, Excel, Outlook, SAP desired Experience with CMMS or ERP systems needed, SAP experience preferred Ability to work independently or with a team and communicate effectively Solid problem solving and decision-making skills with the ability to coach others Able to move/handle 50 lbs. as needed while performing work • Welding Certification is preferred Able to achieve a passing score on a skills assessment (Ramsay)

Job DescriptionDescription: The Maintenance Technician II is a mid-level maintenance position responsible for supporting the safe and reliable operation of machinery, production equipment, and facility systems. The role requires an intermediate understanding of mechanical, electrical, hydraulic, and pneumatic systems, along with the ability to independently perform assigned maintenance and repair work. This position will begin on the day shift and transition to a 2:30 p.m. to 11:00 p.m. schedule once the employee has completed sufficient training and demonstrated proficiency in the essential job functions. Experience and Qualifications • High school diploma or GED required., • Technical training or coursework in industrial maintenance is preferred., • Manufacturing experience is preferred., • Two to five years of maintenance experience is preferred., • Forklift certification is required., • Intermediate knowledge of mechanical, electrical, and hydraulic systems., • Ability to read blueprints, schematics, and technical documents., • Proficiency with power tools, welding equipment, and machining equipment., • Strong analytical, diagnostic, and troubleshooting skills. Tools, Equipment, and Systems The position may work with: • Boom lifts, scissor lifts, forklifts, ladders, electric and manual hoists, and basic rigging equipment., • Lathes, mills, drill presses, radial drill presses, sheet-metal shears, and presses., • Chop saws, band saws, plasma cutters, torches, soldering irons, and ARC, MIG, and TIG welders., • Sanders and grinders., • Multimeters, hydraulic controls, power tools, and hand tools., • Furnaces, burners, air compressors, pneumatic systems, and plumbing systems. Physical Requirements The role involves frequent standing, bending, reaching, climbing, crawling, kneeling, squatting, walking, grasping, and fine-motor work. It also requires lifting, carrying, pushing, and pulling objects of varying weights, including occasional handling of heavier materials. The employee may operate forklifts and vehicles as needed. Reasonable accommodation may be provided to qualified individuals with disabilities so they can perform the essential functions of the position. Requirements: • Perform scheduled and routine preventive maintenance to support equipment efficiency and reliability., • Inspect machinery, equipment, and facility systems for wear, damage, or operational concerns., • Diagnose and troubleshoot mechanical, electrical, pneumatic, and hydraulic problems., • Repair machinery, production equipment, and facility systems., • Assist with the installation of automated machinery and related equipment., • Assist with programming, adjusting, and repairing automated machinery., • Use blueprints, schematics, manuals, and technical documents to complete maintenance work., • Safely operate power tools, hand tools, machining equipment, welding equipment, lifting equipment, and diagnostic instruments., • Perform basic machining, fabrication, cutting, welding, soldering, grinding, and related maintenance work., • Work with industrial systems such as furnaces, burners, air compressors, plumbing, pneumatic systems, and hydraulic controls., • Maintain accurate records of preventive maintenance, inspections, equipment repairs, and completed work., • Follow all required safety procedures, equipment-operation requirements, and company policies., • Maintain a safe and organized work area., • Independently complete assigned maintenance tasks and communicate equipment concerns to the Maintenance Supervisor., • Support Betts Company’s purpose and demonstrate its seven core values: Respect Everyone, Aim for Excellence, Share Your Passion, Work Smart, Take Care, Communicate, and Act Ethically.

Job Description Maintenance Mechanic – MRF/Compost OperationsAbout the Role Mid Valley Disposal is looking for a hands-on, safety-driven Maintenance Mechanic to support our Material Recovery Facility (MRF) and Compost operations. This role is essential to keeping our equipment, systems, and facilities operating safely, efficiently, and with minimal downtime. If you’re mechanically inclined, enjoy troubleshooting, and take pride in keeping industrial equipment running strong, this is a solid opportunity to join a stable operation with meaningful, long-term work. This position reports directly to the Maintenance Supervisor, MRF/Compost Operations. What You’ll Be Doing Perform routine, preventive, and corrective maintenance on mechanical, electrical, and hydraulic systems Troubleshoot and repair equipment including conveyors, grinders, balers, compactors, and related machinery Respond to urgent repair needs and support emergency maintenance situations Complete daily work orders and accurately document maintenance activities Follow all safety protocols, including lockout/tagout procedures Assist with equipment installations, upgrades, and modifications Maintain tools, parts, and work areas in a clean, organized, and safe condition Support facility maintenance such as lighting, plumbing, and minor building repairs Communicate equipment issues and parts needs to the Maintenance Supervisor Perform other duties as assigned to support plant operations What We’re Looking ForRequired High School Diploma or GED 2+ years of maintenance experience in an industrial, manufacturing, recycling, compost, or waste management environment Strong working knowledge of mechanical and electrical systems Ability to read and understand technical manuals, blueprints, and schematics Strong commitment to safety, quality workmanship, and reliability Familiarity with OSHA and general industrial safety standards Comfortable using computers, Microsoft Office, and maintenance management systems Preferred Technical certification or formal training in mechanical or electrical systems Experience working in MRF, compost, recycling, or heavy industrial environments Bilingual in Spanish Why Join Mid Valley Disposal Stable, essential industry with long-term opportunity Hands-on work with varied equipment (no two days are the same) Team-oriented environment with a strong focus on safety and respect Opportunity to apply your skills where they truly matter to daily operations Work Environment This position works in an industrial setting with exposure to machinery, noise, and outdoor conditions. Candidates must be comfortable performing physical work and responding to operational needs as they arise.

Job Description We are seeking a dedicated Building & Maintenance Technician to join our team. This position is responsible for performing general building maintenance, repairs, and groundskeeping at multiple Shop N' Go locations. Most work will be performed outdoors, and the role will require frequent travel between stores. The Building & Maintenance Technician will report directly to our Building & Maintenance Manager. Key Responsibilities: • Perform repairs and adjustments on building structures, fixtures, and equipment., • Operate and maintain power tools, hand tools, and other maintenance equipment., • Assist with maintenance of HVAC units, lighting, plumbing fixtures, and other store equipment., • Conduct routine inspections to identify and address maintenance issues., • Move, lift, carry, and place objects weighing up to 50 lbs., • Maintain outdoor areas, including litter and debris removal., • Perform landscaping tasks such as mowing, trimming, watering, and leaf blowing., • Follow all company safety protocols and OSHA regulations., • Safely handle and dispose of hazardous materials., • Participate in required safety training sessions. Qualifications: • High school diploma or equivalent., • Previous experience in building maintenance, facilities work, or a similar role preferred., • Proficiency in using hand tools and power tools., • Basic understanding of building systems such as plumbing, electrical, and HVAC., • Ability to read and follow work orders, diagrams, and basic maintenance instructions., • Comfortable working outdoors in various weather conditions., • Strong problem-solving skills and attention to detail., • Ability to work independently and mange time effectively., • Willingness to work flexible hours, including evenings and weekends as needed., • Must pass a drug screening., • Valid California driver's license and clean driving record., • Reliable transportation to travel between store locations. Benefits: • Competitive wages, • Matching 401 (K), • Health, dental, and vision insurance, • Paid time off and paid holidays Powered by JazzHR 0guKtd9eNs

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary This position is responsible for operating multiple Veolia contracted client water and wastewater facilities. The primary purpose of this position is to cover vacations & absences at existing facilities, assist in the training and development of local operations teams, and to serve in a support role at new account start-ups. This position will be responsible for assisting with the overall operation and maintenance of accounts in their area. In between time at designated accounts, this position will be responsible for the development of training resources for general water and wastewater industry knowledge, as well as site-specific treatment training for all technicians in their region. Essential Operational Duties and Responsibilities: • Maintain complete operational coverage of the Veolia-operated facilities in your designated region as vacations and unplanned absences arise, • Coverage will be required on both day shifts and night shifts as absences arise, requiring significant schedule flexibility, • Assist in the operational development of all local technicians within your designated region, • Ensure that industry standards and best practices are in use at all Veolia-operated facilities in your designated region, • Support new account start-up projects as they arise, • Provide knowledgeable support to local technicians within your designated region to assist in troubleshooting process issues as they arise, • Operate and control electric motors, pumps, and valves to regulate the flow of water into the Wastewater treatment plant, • Collect and test Wastewater samples to determine concentration levels and impurities at the designated testing frequency, • Responsible for accurate record keeping of client data such as residual content of chemicals, water turbidity, and water pressure, • Comply with all Veolia and multiple's safety parameters/programs, • Analyze lab data to uncover potential treatment issues and then implement process changes to prevent non-compliance, • This position may be responsible for compiling data for the Environmental Protection Agency or state regulatory body, • Coordinate with other operators throughout the multiple facilities to maintain the plant's wastewater treatment equipment, • Consult with management in the operations of their Wastewater plant to determine the best treatment for their Wastewater, • Independent scheduling of workload, • Participation in team meetings and discussions is required. Collaboration with team members on a regular basis is expected Essential Maintenance Duties and Responsibilities: • Coordinate third-party maintenance support for all maintenance projects that are outside of Veolia's scope of work, • Complete all preventative maintenance defined by Veolia and multiple management at the designated frequency, • Complete, or assist in the completion of, all minor and intermediate maintenance projects that may arise to ensure the Wastewater treatment facility remains operating effectively and efficiently, • Management of inventories including lab supplies, consumable items, and equipment parts Supervisory Responsibilities: • Willingness and availability to work with fellow operators on off-shifts when problems arise or if the operator needs assistance, • 24/7 availability to the Wastewater operators and multiple management, • Communicate frequently with the Veolia Account Manager regarding the operation of the Wastewater plant, • Provide supervision and leadership to the other team members by exemplifying hard work, attention to detail, fair treatment of each member of the team, and taking responsibility for results, • Provide direction to the team on the daily operation and maintenance of the Wastewater plant to ensure compliance, • Provide training and/or facilitate training of operators for all facets of the operation/management of the multiple wastewater facilities, • Provide clear verbal and written instructions to the team on the proper operation and maintenance of the Wastewater treatment plant and the equipment, • Continually optimize the operation of the wastewater treatment plant, chemistry, and equipment to improve operating efficiency and reduce operating costsQualifications Knowledge, Skills & Abilities: • Knowledge of the operation and control of electric motors, pumps, and valves, • Excellent attention to detail, • Strong time management skills, • Strong communication skills, both verbal and written, • Excellent leadership and management skills, • Good computer skills, • Proficiency with Google Suite, • Ability and desire to build and maintain a "team mentality" Education & Experience: Required • High school diploma or equivalent, • 3+ years of experience in wastewater treatment plant operations or related field Preferred • Prior experience in a traveling work role, • Operational experience with site-specific equipment, • Strong mechanical aptitude Working Conditions: • Typical working conditions for this position include a wastewater treatment plant and the outdoors, • This position may be exposed to extreme heat and cold weather conditions, burns, chemicals, dangerous systems, dirt and dust, electrical hazards, grease and oil, loud noises, vibrations, steam and high levels of moisture, and other hazardous conditions, • This position requires the job holder to lift and/or carry up to 75 pounds, climb a vertical ladder up to 30 feet, stand for long periods of time, walk on uneven surfaces, regularly bend, climb onto and safely exit a forklift, use extension ladders daily, and the ability to climb into and maneuver the body in tight spaces, • This position is required to work both day and night shifts, as needed, including 12-hour shifts as needed, • Must have the availability for emergency call-ins or phone support, • Must comply with all Veolia and multiple safety parameters/programs; mindfulness of safety is key Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. We offer challenging and meaningful careers, and because our people are our greatest assets, we also offer competitive compensation and benefits that include: Benefits: • Medical, Dental, & Vision Insurance Starting Day 1!, • Life Insurance, • Paid Time Off, • Paid Holidays, • Parental Leave, • 401(k) Plan, • Flexible Spending & Health Savings Accounts, • AD&D Insurance, • Disability Insurance, • Tuition Reimbursement We also offer... Opportunity for advancement. A place to build a career! Training in valuable skills Opportunity for new challenges. We’re growing! Strong leadership team! As an inclusive company, Veolia is committed to diversity and considers all applications equally, without discrimination. Applicants are required to be eligible to lawfully work in the U.S. immediately; the employer will not sponsor applicants for U.S. work authorization (e.g., H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of the company, and no fee will be due As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Control Engineer ( Electronics/Electrical) About Netafim: At Netafim, we work side by side with millions of farmers and communities around the world to address one of agricultures most pressing challenges: how to produce more food with fewer resources in an increasingly unpredictable environment. For more than 60 years, Netafim has been a global leader in precision irrigation, powered by people working across teams and geographies to bring together agronomy, engineering, data, and innovation. Together, we help improve decision-making in the field and drive better outcomes across crops and climates turning complexity into clarity and making agriculture more precise, efficient, and sustainable to enable farmers to grow more with less. Essential Duties and Responsibilities Implementing cost-effective equipment modifications to improve safety, reliability, efficiency, and throughput. Updating and documenting electrical, electronics, control, and mechanical system changes, modifications, and upgrades. Developing, testing, troubleshooting, and evaluating existing controls and automation systems. Wiring, testing, repairing, and troubleshooting high and low voltage systems including 480VAC, 400VAC, 240VAC, 120VAC, and 24VDC. Troubleshooting PLC-controlled equipment, drives, motors, sensors, and automation systems. Discussing and solving complex technical problems with manufacturing, maintenance, subcontractors, suppliers, and vendors. Developing and managing engineering and maintenance projects. Complying with safety and building codes related to equipment, controls, wiring, and facilities. Providing technical support to production and maintenance teams during breakdowns. Responsible for assigned activities on infrastructure and facility. Participating in the On Call Engineer rotation for a 24/7 production facility. Encourage use of new techniques and focus on fact-based problem solving. Continually improve safety record by proactive reporting and leading by example. Adopt and follow LEAN processes. Other duties as assigned. SUPERVISORY RESPONSIBILITIES May oversee outside vendors making repairs, modifications, and/or installations. MINIMUM QUALIFICATIONS include the following: Excellent knowledge of industrial PLC platforms such as Omron, Siemens, Beckhoff, AllenBradley, Control Techniques, and other equivalent systems. Strong troubleshooting capability for control, automation, and integrated mechatronic systems. Ability to read, interpret, and update electrical, electronic, control, and basic mechanical drawings. Ability to manage, coordinate, and lead project installations, equipment upgrades, and system improvements. Experience working with AC and DC drives, motors, and motion control systems. Excellent knowledge of personal and industrial computer systems, including hardware and software used in manufacturing environments. Good understanding of the mechanical aspects of complex automated manufacturing systems, including pneumatics, hydraulics, and machine mechanisms. Working knowledge of SCADA, HMI, and industrial communication systems. Ability to safely work with voltages ranging from lowvoltage DC control systems to threephase 480 VAC power systems. EDUCATION and/or EXPERIENCE Bachelors degree in Mechatronics Engineering, Electrical Engineering, Electronics Engineering, Mechanical Engineering, or equivalent. Relevant industrial manufacturing experience is preferred but not mandatory. The position is suitable for both fresh graduates and experienced candidates who demonstrate the capability to support manufacturing equipment, automation systems, and maintenance activities. LANGUAGE SKILLS Good English written and verbal communication skills needed. SKILLS Ability to manage multiple projects. Expertise in computer applications such as Excel, Word, and any drafting software. DESIRED TRAITS AND CHARACTERISTICS Analytical thinker, self-starter, responsible, independent, and team oriented. PHYSICAL DEMANDS May be required to lift up to 70 lbs. Potential for extended periods of standing/walking in and around the production facility. Under some circumstances, will be required to be On Call for this 24/7/365 production facility. CERTIFIATES, LICENSES, REGISTRATIONS Four-year engineering degree or equivalent technical qualification. Certification, training, or formal coursework related to electrical, electronics, automation, mechatronics, or industrial maintenance is desirable. Apprentice-level or higher electrician certification, controls/automation certification, or equivalent industrial training is a plus. This position is not eligible for visa sponsorship. Applicants must be authorized to work in the United States without current or future employer sponsorship. The compensation for this position will typically range from $95,000 - $105,000/yr. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, a 401(k) retirement savings plan/Canadian pension plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, tuition reimbursement, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. We welcome purpose-driven dreamers, doers, and builders, recognizing that it takes difference to make a difference. If youre ready to bring your skills, talents, and perspective to moving your career, the company, people, and the planet forward, wed like to hear from you. We believe that every voice matters; every community deserves respect; and every challenge is an opportunity and united by empathy, we are stronger for our different perspectives. We are dedicated to building a more diverse, inclusive, and equitable workplace that supports the needs of all our employees regardless of their role, location, identity, and background. Compensation details: 95000-105000 Yearly Salary PIa873afbadf54-38003-41953155

Job Description Daniels Health is seeking an experienced Travelling Carpenter to support facility and plant operations across a growing multi-site footprint. This role is responsible for rough and finish carpentry, framing, repairs, and build-out work needed to keep Daniels Health locations safe, compliant, and fully operational. The Travelling Carpenter also supports capital construction and equipment installation projects, including Autoclaves, Wash lines, Compactors, and boiler rooms, led by the General Contractor, partnering closely with the Plant Manager and project team to keep carpentry scopes on schedule and up to code. This is a full-time, W2 position requiring travel to project sites approximately 50% of the time, with flexibility to support day shift and, where needed, 2nd shift coverage. What you will do What you will do: Carpentry, Framing & Repair • Perform rough and finish carpentry, including framing, drywall, doors, frames, hardware, trim, cabinetry, and ceiling systems across Daniels Health facilities., • Repair and maintain walls, floors, stairs, platforms, railings, dock areas, and other building components that affect plant uptime, safety, or building operations., • Support site buildouts, retrofits, office and break-room renovations, and maintenance projects in high-priority locations., • Provide support for off-shift or 2nd shift maintenance needs when required by the site. Capital Project & Installation Support • Build equipment pads, platforms, enclosures, access walkways, blocking, and backing to support installation of Autoclaves, Wash lines, Compactors, boiler rooms, and related equipment., • Partner with the General Contractor and external subcontractors to execute carpentry scopes of work on time, within budget, and up to code., • Read and interpret blueprints, architectural and mechanical/electrical/plumbing (MEP) drawings, and equipment specifications to lay out and guide work., • Coordinate sequencing with electricians, plumbers, HVAC, and masonry trades so openings, supports, and finishes are ready ahead of installation. Multi-Site Travel & Coverage, • Travel to multiple sites (approximately 50%) across assigned regions: Midwest, East Coast, Florida, and Texas, with priority coverage in California, Texas, Florida, and Georgia to assess conditions, complete repairs, and support build-out and installation projects., • Maintain flexibility to support day shift and, where needed, 2nd shift coverage based on site needs., • Transport, maintain, and account for tools, materials, and equipment between job sites. Cross-Functional Collaboration • Partner with Plant Managers, the General Contractor, and maintenance stakeholders to identify risks, prioritize repairs, and improve facility reliability., • Provide regular updates to the Head of Infrastructure, Plant Manager, and General Contractor on job progress, material needs, and site conditions., • Ensure minimal disruption to ongoing facility operations during carpentry repairs or construction work. Safety & Compliance, • Ensure all carpentry work is completed in compliance with the International Building Code (IBC), local building and fire codes, ADA requirements, and internal standards., • Enforce OSHA and site-specific safety standards, including fall protection, ladder and scaffold safety, and safe power-tool use, whether working independently or alongside subcontractors., • Maintain current knowledge of permitting and inspection requirements across assigned states. Candidate Profile What we are looking for Required Qualifications • 3+ years of professional carpentry experience in commercial, industrial, manufacturing, or multi-site facilities environments., • Skilled in rough and finish carpentry, framing, drywall, doors and hardware, and general building repair., • Proficient with hand tools, power tools, and layout tools (levels, lasers, measuring and cutting equipment)., • Familiarity with capital construction or equipment installation projects (e.g., autoclaves, wash lines, compactors, boiler rooms) preferred., • Ability to read blueprints, architectural drawings, and technical specifications., • Strong practical judgment and a solution-focused approach., • Ability to travel up to 50% consistently, including priority regions (CA, TX, FL, GA)., • Flexibility to support day shift and, where needed, 2nd shift coverage., • Able to lift up to 50 lbs, work at heights, and stand, climb, and kneel for extended periods., • Strong communication skills; comfortable working directly with the Head of Infrastructure, Plant Manager, and General Contractor. Credentials/Certifications Required, • Journeyman-level carpentry skills; completion of a carpentry apprenticeship or trade-school program preferred., • Valid driver’s license in good standing and ability to travel by air and ground., • Ability to pass background check/drug screening as required., • OSHA 10-Hour Construction Safety Certification required; OSHA 30-Hour preferred., • Aerial/scissor lift and fall-protection training a plus., • State or local contractor or carpentry license where required by jurisdiction. Ideal Candidate Profile, • Skilled and technically strong, but also practical and adaptable., • Thrives in hands-on environments and can solve problems quickly with minimal oversight., • Brings urgency, accountability, and strong field presence., • Motivated by meaningful work in a company focused on protecting healthcare workers and improving safety outcomes. Why work for us, • Job Stability – As an essential service to healthcare, Daniels Health is non-seasonal and recession-proof, • Comprehensive Benefits – Medical, Dental, and Vision Insurance effective on Day One; Paid Short-Term Disability; Company-sponsored Life Insurance; Voluntary Long-Term Disability and Accident Insurance, • 401K Matching Plan – 50% employer match on up to 6% contribution (up to 3% employer contribution) with a 5-year vesting schedule and no waiting period on the match, • Permanent Position – Full-time, 40 hours per week with long-term career potential, • Mission-Driven Work – Be part of a company that’s making healthcare safer and more sustainable through innovative waste management solutions, • Growth & Development – Opportunities to expand your skills in leadership, data analysis, and cross-functional collaboration within a supportive and evolving organization If you're looking for a stable, mission-driven role where your leadership makes a real impact, we’d love to hear from you. At Daniels Health, you’ll be part of a team that values safety, innovation, and people. Apply today and take the next step in your career with a company that’s transforming healthcare waste management for good. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About the role The Service Technician diagnoses and completes repairs on customer vehicles in a professional, timely manner while ensuring quality repairs at a fair cost to the customer. ***Pay Range: $20.00 - $25.00 based on experience. Essential Duties • Daily planning with the rest of the service team to establish repair strategies based on job priorities., • Determine work required from the repair order., • Diagnose vehicle in operation to determine issue, to verify customer’s complaint, and to plan repair strategy., • Complete repairs efficiently within the time allowed., • Perform QUALITY repairs minimizing shop comebacks and unnecessary shop expense., • Submit a complete and accurate write-up for each repair performed., • Road test vehicles to verify satisfactory repair (if you possess a CDL), • Manual and computerized time posting on a ongoing basis., • Confirm that all cores are returned to parts and that warranty parts are properly tagged and stored., • Coordinate with the rear parts counter, as needed on parts needed for the repair., • Maintain a clean shop environment. Throw out trash from your repair. Return tools to the cage. Roll up and store drop lights and extension cords., • Maintain the readiness and proper working condition of the shop tools. Make adjustments and minor repairs as needed. Notify Service Manager if a needed tool is not quickly repairable., • Assist the Service Team with preparing accurate repair estimates when required., • Update Service Manager on current repairs in process on a regular basis., • Participate in ongoing training in an effort to increase skills., • Maintain current certifications., • Work in a safe manner. Do not put yourself, a customer, a fellow employee, or a vehicle in harm’s way., • Provide and maintain a full set of hand tools and air tools., • Leave the customer’s vehicle in the same or cleaner condition than when you started repair. Use seat covers and floor mats., • Be punctual at the start of your shift and when returning from lunch and breaks., • Do not exceed one hour on diagnosis without approval from the Service Manager., • Bring any additional repairs, immediately to the attention of the Service Team, • Always wear your safety glasses when on the shop floor., • Understand and follow federal, state, and local regulations regarding disposal of hazardous waste, OSHA, MSDA, right-to-know, etc,, • Conduct oneself in a professional manner reflecting the importance that the customer has in our business. Without the customer, we are out of business., • Think company "first" & customer "first" & safety "first" in all day to day activities Qualifications • Paccar and / or Cummins certification, • Diagnostic / Repair experience with electrical / after-treatments systems, • Brakes, Oil Changes, Clutch Jobs & other general truck repairs, • 5 years working on heavy duty diesel trucks / equipment, • Clean DMV record and current driver’s license. Working Conditions • While performing the duties of this job, the employee is frequently exposed to moving mechanical parts andoutside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places, and fumes or airborne particles., • The noise level in the work environment is usually moderate. Cognitive and Physical Demands • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs., • Ability to apply common sense understanding to carry out instructions furnished in written oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • Frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • Frequently lift and/or move items that weigh on average 10 lbs. or less. At times employees may handle parts up to 50 pounds and occasionally team lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. EEO Statement Coast Counties Peterbilt is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Coast Counties Peterbilt are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, veteran or disability status, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Coast Counties Peterbilt will not tolerate discrimination or harassment based on any of these characteristics. Coast Counties Peterbilt encourages applicants of all ages. PIc1b5cbfdc030-26276-41503887

About the role The Service Technician diagnoses and completes repairs on customer vehicles in a professional, timely manner while ensuring quality repairs at a fair cost to the customer. ***Pay Range: $20.00 - $25.00 based on experience. Essential Duties • Daily planning with the rest of the service team to establish repair strategies based on job priorities., • Determine work required from the repair order., • Diagnose vehicle in operation to determine issue, to verify customer’s complaint, and to plan repair strategy., • Complete repairs efficiently within the time allowed., • Perform QUALITY repairs minimizing shop comebacks and unnecessary shop expense., • Submit a complete and accurate write-up for each repair performed., • Road test vehicles to verify satisfactory repair (if you possess a CDL), • Manual and computerized time posting on a ongoing basis., • Confirm that all cores are returned to parts and that warranty parts are properly tagged and stored., • Coordinate with the rear parts counter, as needed on parts needed for the repair., • Maintain a clean shop environment. Throw out trash from your repair. Return tools to the cage. Roll up and store drop lights and extension cords., • Maintain the readiness and proper working condition of the shop tools. Make adjustments and minor repairs as needed. Notify Service Manager if a needed tool is not quickly repairable., • Assist the Service Team with preparing accurate repair estimates when required., • Update Service Manager on current repairs in process on a regular basis., • Participate in ongoing training in an effort to increase skills., • Maintain current certifications., • Work in a safe manner. Do not put yourself, a customer, a fellow employee, or a vehicle in harm’s way., • Provide and maintain a full set of hand tools and air tools., • Leave the customer’s vehicle in the same or cleaner condition than when you started repair. Use seat covers and floor mats., • Be punctual at the start of your shift and when returning from lunch and breaks., • Do not exceed one hour on diagnosis without approval from the Service Manager., • Bring any additional repairs, immediately to the attention of the Service Team, • Always wear your safety glasses when on the shop floor., • Understand and follow federal, state, and local regulations regarding disposal of hazardous waste, OSHA, MSDA, right-to-know, etc,, • Conduct oneself in a professional manner reflecting the importance that the customer has in our business. Without the customer, we are out of business., • Think company first & customer first & safety first in all day to day activities Qualifications • Paccar and / or Cummins certification, • Diagnostic / Repair experience with electrical / after-treatments systems, • Brakes, Oil Changes, Clutch Jobs & other general truck repairs, • 5 years working on heavy duty diesel trucks / equipment, • Clean DMV record and current driver’s license. Working Conditions • While performing the duties of this job, the employee is frequently exposed to moving mechanical parts andoutside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places, and fumes or airborne particles., • The noise level in the work environment is usually moderate. Cognitive and Physical Demands • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs., • Ability to apply common sense understanding to carry out instructions furnished in written oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • Frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • Frequently lift and/or move items that weigh on average 10 lbs. or less. At times employees may handle parts up to 50 pounds and occasionally team lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. EEO Statement Coast Counties Peterbilt is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Coast Counties Peterbilt are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, veteran or disability status, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Coast Counties Peterbilt will not tolerate discrimination or harassment based on any of these characteristics. Coast Counties Peterbilt encourages applicants of all ages. PI8178db4c09dd-38003-41503887

About the role The Service Technician diagnoses and completes repairs on customer vehicles in a professional, timely manner while ensuring quality repairs at a fair cost to the customer. ***Pay Range: $34.00 - $38.00/Hour Based on experience Essential Duties • Daily planning with the rest of the service team to establish repair strategies based on job priorities., • Determine work required from the repair order., • Diagnose vehicle in operation to determine issue, to verify customer’s complaint, and to plan repair strategy., • Complete repairs efficiently within the time allowed., • Perform QUALITY repairs minimizing shop comebacks and unnecessary shop expense., • Submit a complete and accurate write-up for each repair performed., • Road test vehicles to verify satisfactory repair (if you possess a CDL), • Manual and computerized time posting on a ongoing basis., • Confirm that all cores are returned to parts and that warranty parts are properly tagged and stored., • Coordinate with the rear parts counter, as needed on parts needed for the repair., • Maintain a clean shop environment. Throw out trash from your repair. Return tools to the cage. Roll up and store drop lights and extension cords., • Maintain the readiness and proper working condition of the shop tools. Make adjustments and minor repairs as needed. Notify Service Manager if a needed tool is not quickly repairable., • Assist the Service Team with preparing accurate repair estimates when required., • Update Service Manager on current repairs in process on a regular basis., • Participate in ongoing training in an effort to increase skills., • Maintain current certifications., • Work in a safe manner. Do not put yourself, a customer, a fellow employee, or a vehicle in harm’s way., • Provide and maintain a full set of hand tools and air tools., • Leave the customer’s vehicle in the same or cleaner condition than when you started repair. Use seat covers and floor mats., • Be punctual at the start of your shift and when returning from lunch and breaks., • Do not exceed one hour on diagnosis without approval from the Service Manager., • Bring any additional repairs, immediately to the attention of the Service Team, • Always wear your safety glasses when on the shop floor., • Understand and follow federal, state, and local regulations regarding disposal of hazardous waste, OSHA, MSDA, right-to-know, etc,, • Conduct oneself in a professional manner reflecting the importance that the customer has in our business. Without the customer, we are out of business., • Think company first & customer first & safety first in all day to day activities Qualifications • Paccar and / or Cummins certification, • Diagnostic / Repair experience with electrical / after-treatments systems, • Brakes, Oil Changes, Clutch Jobs & other general truck repairs, • 5 years working on heavy duty diesel trucks / equipment, • Clean DMV record and current driver’s license. Working Conditions • While performing the duties of this job, the employee is frequently exposed to moving mechanical parts andoutside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places, and fumes or airborne particles., • The noise level in the work environment is usually moderate. Cognitive and Physical Demands • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs., • Ability to apply common sense understanding to carry out instructions furnished in written oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • Frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • Frequently lift and/or move items that weigh on average 10 lbs. or less. At times employees may handle parts up to 50 pounds and occasionally team lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. EEO Statement Coast Counties Peterbilt is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Coast Counties Peterbilt are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, veteran or disability status, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Coast Counties Peterbilt will not tolerate discrimination or harassment based on any of these characteristics. Coast Counties Peterbilt encourages applicants of all ages. PI67bcb8ba9223-38003-41503890

Electrical Foreman needed for large-scale projects, with strong career growth, safety focus, and nationwide opportunities This Jobot Job is hosted by: Bill Artiga Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $42 - $55 per hour A bit about us: Redefining the way energy is designed, applied, and consumed. Operating across construction, engineering, manufacturing, and renewable energy, this organization is recognized as one of the Healthiest 100 Workplaces in America and is committed to the well-being of its team through a Culture of Care. Why join us? • Competitive compensation plus daily Per Diem, • Career and Educational advancement, • Full benefits (medical, dental, vision), • Ability to work on fun and challenging projects Job Details The Licensed Foreman supervises electrical installations, troubleshooting, and maintenance in commercial and industrial settings. This role ensures projects are completed safely, on time, and within budget while leading and developing a team of electricians. Minimum Requirements: • Education/Experience: Completion of an electrical apprenticeship or equivalent work experience (approx. 8,000 hours)., • Travel: 60–75% of the time., • Work Schedule: Typically between 6:00 am and 6:00 pm, Monday through Friday. Hours may vary depending on project needs and can include nights, weekends, and holidays. Key Responsibilities: • Maintain current licensing, certifications, and training requirements., • Lead and manage medium-sized projects (5–10 electricians) effectively., • Set clear expectations and motivate crews to meet or exceed goals., • Ensure all projects are completed safely, on time, and within budget., • Complete required paperwork accurately and promptly (foreman logs, performance evaluations, purchase orders, time cards, etc.)., • Manage resources efficiently, including tools, equipment, and staffing., • Read and interpret project estimates with support from project management or superintendent., • Provide regular feedback and coaching to crew members., • Conduct thorough on-site risk assessments and enforce workplace safety procedures, including safety audits and toolbox talks., • Mentor and develop team members actively., • Collaborate with internal resources across departments such as pre-construction, engineering, estimating, and productivity teams., • Maintain compliance with company policies and ensure proper documentation of corrective actions when necessary., • Foster strong customer relationships through effective problem-solving., • Participate in hiring, referral, and mentoring initiatives as appropriate., • Perform additional duties as assigned. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Come join the City of Fresno in Building a Better Fresno! Want to see what it's like to work here? Explore our We Work For You video series to discover the real stories, passion, and purpose of the team behind Fresno's success. Street Maintenance Superintendent is the highest supervisory class in the Street Maintenance Supervisor series and is responsible for directing the field activities of the Street Maintenance Division. Incumbents coordinate, assign and direct the work of personnel engaged in street maintenance including preparing job cost estimates, ensuring compliance and maintaining records of projects. • Plans, schedules and maintain records for street projects and monitors street projects., • Supervises and coordinates the work of the division in construction, maintenance, street repair, sidewalks, alleys, curbs, gutters, storm drains, electrical work, and urban forest., • Inspects and ensures compliance with various contracts in the division., • Assigns, supervises, monitors, inspects, and evaluates the work of subordinate employees in the maintenance of publicly owned rights of way, streets, and alleys., • Maintains records of projects, records time, location, and type of work performed by subordinates., • Assists in the development and implementation of divisional safety and training programs., • Prepares job cost estimates., • Receives, investigates, and processes complaints from the public., • Directs the division in the absence of the Public Works Manager. Performs related duties as required. One vacancy exists in the Street Maintenance Division of the Public Works Department. Immediate and future vacancies will be filled from this eligible list for a period of three (3) months from the date the eligible list is created, with the option of extending that period for up to a maximum of two years at the City's discretion. If the examination process is suspended for this recruitment, the eligible list may be limited to three (3) months. Applicants must meet the minimum qualifications on or before the posted filing deadline in order to qualify for the examination. Two (2) years of supervisory experience in street maintenance operations or field construction operations. And Twelve (12) units of accredited college or university coursework in engineering, construction, public or business administration. An additional year of qualifying experience may be substituted for the required education. A copy of degree or college transcripts must be uploaded and included in your on-line application for verification of requirement. Applicants lacking the documentation may be rejected. Possession and continued maintenance of a valid California Driver's License required at time of appointment. Candidates considered for hire must provide proof of a valid driver's license and current copy of their driving record. The selected eligible candidates certified will be required to successfully pass a department interview and a Department of Justice fingerprint prior to employment with the City of Fresno. The examination process may consist of the following: APPLICATION REVIEW - Qualifying Only: Applications which meet the minimum qualifications will be reviewed and a limited number of the most qualified candidates will be invited to the oral examination. Selection of the most qualified candidates will be based upon those applications demonstrating the greatest breadth and depth of applicable education, experience, skills and training. Therefore, applicants are urged to submit sufficiently detailed information in their application materials for evaluation. ORAL EXAM - 100%: A panel of subject matter experts will conduct a job-related oral examination to evaluate a candidate's knowledge of materials, tools, equipment, methods and practices used in the construction, maintenance and repairs of streets and related infrastructure and safety procedures; ability to plan, layout, coordinate, inspect and schedule the work of street maintenance employees, read and interpret engineering plans and specifications and maintain effective working relationships or other topics related to a candidate's training, experience and qualifications for the position of Street Maintenance Superintendent. Candidates must achieve a passing score to qualify for the eligible list. The oral examination is tentatively scheduled for the week of October 26, 2026. The City of Fresno is an Equal Opportunity Employer. Should you need a special accommodation due to a qualifying disability, please contact the Personnel Service Department at (559) 621-6950 in advance of the examination. For information on how to complete an online application, please visit the Help & Support tab. For NEOGOV Application Assistance, please call 1-855-524-5627 or email support@governmentjobs.com. ONLY ONLINE APPLICATIONS AND MATERIALS ARE ACCEPTED and must be submitted by midnight on the closing deadline, or they will not be accepted for any reason. Required licenses, certifications, and education must be verified with supporting documents. Foreign education must be evaluated by a credential evaluation service recognized by the U.S. Department of Education. Please ensure all relevant attachments are uploaded with your application. For the work experience section, provide detailed descriptions of job duties for each position related to the specific role you are applying for. Resumes are not a substitute for completing this section and will only be reviewed as supplemental information, not for determining minimum qualifications. For other City of Fresno employment opportunities, please view our Careers Homepage. Bargaining Unit 13Management Non-Confidential and Non-Management ConfidentialCity of Fresno Profession Employees Association (CFPEA) BENEFIT - DESCRIPTION HEALTH INSURANCE - The City contributes toward monthly premiums for PPO medical, dental and vision for employee and dependents. FLEXIBLE SPENDING ACCOUNT - IRS 125 Plan for health and dependent care expenses. DEFERRED COMPENSATION - Voluntary 457 plan with Fidelity Investments to increase your retirement savings. ANNUAL LEAVE - 15.5 20 hours per month based on years of service with cash out provisions. LIFE INSURANCE - Benefit equal to annual salary with a maximum of $150,000; premium paid by the City. SUPPLEMENTAL SICK - 40 hours per fiscal year.80 hours lifetime maximum. MANAGEMENT LEAVE - 60 hours per fiscal year with cash out provisions, for exempt employees only. HOLIDAYS - 10 City-observed annual holidays, plus birthday and 2 personal days. LONG TERM DISABILITY - Benefit equal to 66.66% of monthly salary up to $7,500 per month after 30 days of disability; premium paid by the City. BUS PASSES - Provided to Supervisors in FAX Operations. BILINGUAL PREMIUM - $100 per month upon approved certification HEALTH REIMBURSEMENT ARRANGEMENT (HRA)Eligible retirees can use the remaining Sick Leave balance, in excess of 240 hours, at 80% of hourly rate and otherqualifiedleave balances, tax free, to reimburse health insurance premiums and other qualified medical expenses. RETIREMENT -City of Fresno Retirement Systems, one of the best funded public systems in the state. Reciprocity with other public California systems. Vested in Retirement benefits after 5 years of service. City employees do not participate in Social Security. DROP (Deferred Retirement Option Program):an optional, voluntary program that allows an employee to deposit retirement benefits in a special savings account within the Retirement System while continuing to work for the City of Fresno for up to 10 years. Participation minimum is age 50 and vested. Benefits include ownership of accumulated funds, compound interest earnings, and alternative distribution options. Additional information regarding the City of Fresno benefits is available athttps://www.fresno.gov/personnel/human-resources-support/#tab-1 Please note that the benefits package described above is specific to permanent full-time employees. Employees engaged on a part-time, temporary, limited, or other basis may have different entitlements.

MARA is seeking a Senior Power Systems Automation Engineer to design, implement, commission, and maintain power automation and SCADA systems across our data center, mining, generation, and utility-interconnected sites. These environments include large-scale electrical infrastructure such as substations, switchgear, meters, protective relays, RTACs, PLCs, generator controls, communication gateways, and energy management integrations. In this role, you will assess site requirements, define the appropriate control and monitoring architecture, evaluate and select hardware, coordinate installation, configure field communications, and commission reliable systems in production environments. You will also configure communication flows between site equipment, utilities, generation assets, third-party operators, and MARA’s internal energy management and operations platforms. The ideal candidate has a strong electrical engineering foundation, hands-on experience with power generation or utility-scale electrical systems, and practical expertise implementing SCADA, automation, telemetry, and industrial communication solutions in the field. This role requires someone who can move comfortably between engineering design, vendor coordination, site implementation, commissioning, troubleshooting, documentation, and long-term operational support. ESSENTIAL DUTIES AND RESPONSIBILITIES Site Assessment & Solution Design • Assess data center, mining, generation, and utility interconnection requirements to determine appropriate SCADA, automation, telemetry, and control solutions., • Design site-level power automation architectures for monitoring, control, dispatch, curtailment, generation coordination, alarm management, and operational visibility., • Develop designs that account for site electrical topology, utility requirements, generation assets, substations, switchgear, meters, relays, RTACs, PLCs, communication networks, and operator workflows., • Define device lists, point lists, control narratives, communication paths, failure modes, integration requirements, and commissioning criteria., • Evaluate tradeoffs across safety, reliability, maintainability, cost, vendor support, cybersecurity, field complexity, and long-term operability., • Collaborate with systems engineers, solution architects, electrical engineers, software engineers, and operations teams to align site designs with broader energy management and operational goals. Power Automation & SCADA Implementation • Design, configure, deploy, and maintain SCADA and power automation systems for site electrical infrastructure., • Evaluate and select hardware such as RTACs, RTUs, PLCs, protective relays, meters, gateways, network devices, HMIs, and related field equipment., • Configure and integrate intelligent electronic devices, including relays, meters, breakers, switchgear controls, generator controllers, and other site electrical assets., • Develop and maintain point databases, tag mappings, alarm definitions, control logic, device configurations, and telemetry models., • Coordinate with vendors, contractors, electricians, controls technicians, and site teams to support installation, checkout, and field implementation., • Ensure implemented systems are practical, supportable, and appropriate for real-world operating conditions at large electrical sites. Communication & EMS Integration • Configure reliable communication flows between site equipment, utility systems, generation assets, third-party operators, and internal energy management platforms., • Implement and maintain industrial communication protocols such as Modbus TCP/RTU, DNP3, IEC 61850, OPC UA, MQTT, or similar technologies., • Configure Modbus servers, protocol gateways, and data interfaces that expose validated site telemetry and control points to internal systems., • Ensure telemetry, control commands, alarms, and status points are mapped, validated, documented, and supportable., • Design communication architectures that support secure data exchange, resilient operations, observability, and maintainability., • Troubleshoot protocol, network, device communication, data quality, latency, and integration issues across field and enterprise systems. Commissioning, Reliability & Field Support • Plan and execute factory acceptance testing, site acceptance testing, commissioning, and validation for new or upgraded power automation systems., • Verify telemetry, control paths, alarms, interlocks, failover behavior, command permissions, operating procedures, and emergency states before production handoff., • Support ongoing maintenance, upgrades, troubleshooting, and root-cause analysis for SCADA and power control systems., • Develop redundancy, fail-safe, backup, and recovery approaches for critical control and monitoring functions., • Partner with operations teams to ensure systems are safe, reliable, understandable, and aligned with site operating requirements., • Travel to data center, mining, generation, substation, and utility-interconnected sites as needed for assessment, installation coordination, commissioning, troubleshooting, and maintenance. Documentation & Cross Functional Execution • Create and maintain documentation for SCADA architectures, communication diagrams, device configurations, point mappings, control narratives, test plans, runbooks, and maintenance procedures., • Communicate technical decisions, risks, dependencies, field constraints, and implementation status clearly to engineering and operational stakeholders., • Provide technical guidance to operators, technicians, and engineering partners on system behavior, troubleshooting, and operational best practices., • Review vendor proposals, drawings, submittals, and implementation plans for technical fit, reliability, maintainability, and integration impact., • Help establish repeatable standards for power automation, SCADA integration, commissioning, telemetry validation, and site handoff. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Bachelor's degree in electrical engineering, Power Systems, Controls Engineering, or a related technical field, or equivalent practical experience., • 6+ years of experience designing, implementing, commissioning, or maintaining SCADA, automation, controls, telemetry, or power monitoring systems in generation, utility, substation, data center, industrial, or large electrical infrastructure environments., • Hands-on experience with power generation, substations, switchgear, protective relays, meters, PLCs, RTUs, RTACs, communication gateways, or intelligent electronic devices., • Strong understanding of electrical power systems, including utility interconnections, generation assets, distribution equipment, telemetry, alarms, controls, and operational safety considerations., • Experience implementing industrial communication protocols such as Modbus TCP/RTU, DNP3, IEC 61850, OPC UA, MQTT, or similar technologies., • Experience configuring point databases, tag mappings, protocol servers, communication gateways, device settings, and control system interfaces., • Ability to assess site requirements and translate them into practical automation designs, implementation plans, and commissioning steps., • Experience coordinating field installation, vendor / contractor work, commissioning activities, and operational handoff., • Strong troubleshooting skills across electrical devices, controls hardware, SCADA systems, industrial networks, protocols, and data flows., • Familiarity with control system cybersecurity, network segmentation, remote access controls, and operational technology security practices., • Ability to work independently on complex technical problems while collaborating effectively across engineering, operations, networking, security, vendor, and site teams., • Strong documentation, communication, and project execution skills., • Willingness to travel to data center, mining, generation, substation, and utility-interconnected sites as required. PREFERRED QUALIFICATIONS: • Experience with SEL RTACs, SEL relays, GE relays / devices, Schweitzer Engineering Laboratories platforms, or similar utility-grade automation equipment., • Experience designing or maintaining SCADA systems for generation plants, substations, distributed energy resources, microgrids, data centers, or large industrial loads., • Experience integrating site control systems with energy management systems, curtailment systems, dispatch platforms, utility telemetry, or market-facing operational systems., • Experience with generator controls, paralleling switchgear, breakers, protective relay schemes, power meters, load control, or demand response systems., • Experience with HMI configuration, alarm management, historian integration, telemetry validation, and operator-facing control workflows., • Experience producing or reviewing electrical drawings, network diagrams, control narratives, sequence-of-operations documents, and commissioning test plans., • Familiarity with NERC CIP concepts, OT cybersecurity practices, industrial networking, VPNs, firewalls, serial-to-Ethernet gateways, and secure remote access patterns., • Professional Engineer license, Engineer-in-Training certification, or equivalent field experience in power systems, generation, controls, or automation engineering., • Knowledge of energy management, data centers, cryptocurrency mining, large-scale electrical infrastructure, or power market operations is a plus but not required.

Job Description The Shift Manager works under the direction of the Restaurant Manager. They work directly with team members and operate shifts in a restaurant. As a Shift Manager, there are multiple levels of responsibility and development. Progression through these levels is based on demonstrated skills, experience, and operational knowledge. All levels require full certification in the position (completion of Shift Leader (SL) training path and ServSafe certification). All levels of Shift Managers, regardless of their level, are responsible for the following key duties: • Ensure the restaurant is clean and well-maintained, and that all company procedures are followed. Uphold the standards for food quality, cleanliness, sanitation, and customer service., • Effectively manage costs within budgeted levels, including cash handling, food products, labor, paper supplies, energy consumption, and other operational expenses., • Responsible for cash register setup and smooth shift transitions during shift changes., • Oversee and manage the shift, supervising and directing team members, maintaining clear communication, and ensuring a focus on customer service., • When requested, train new and existing team members in various job stations and operational procedures, • Complete all required shift management administrative tasks, including reports, sales readings, and necessary documentation., • Post sales readings, and conduct shift awareness walk-throughs to ensure operations are running smoothly., • Observe and enforce all safety and security procedures, ensuring a safe working environment for both staff and customers. Additional Responsibilities and Requirements Based on Shift Manager Level As Shift Managers progress through different levels, they take on additional responsibilities: Shift Level 1: • Availability: At least 3 days per week, with a minimum of one full shift (open, mid, and/or close)., • Responsibilities:, • Runs a minimum of 1 shift on their own per week., • Expected Knowledge:, • Basic understanding of Labor Percentage and its impact on operations. Shift Level 2: · Availability: At least 4 days per week, including 2 full shifts (opening, mid, and/or close). Must be available to close 1-2 days per week. · Responsibilities: o Runs shifts independently, including managing team members and ensuring operations are smooth. o Take responsibility and complete Inventory Processes and manage stock levels. o Good understanding of Labor Percentage and takes action to ensure it aligns with budgeted levels. o Demonstrates a clear understanding of operational needs and adjusts staffing and resources accordingly. · Expected Knowledge: o Intermediate understanding of Labor Percentage and how to react and adjust staffing based on this metric. o Experience managing inventory processes and order planning. Shift Level 3: • Availability: At least 5 days per week, including 1 weekend day, with at least 3 full shifts (open, mid, and/or close). Must be available to close at least 3 days per week., • Responsibilities:, • Runs shift independently with minimal supervision., • Completes Inventory processes and Food Orders., • Has an advanced understanding of Food Costs and actively manages food cost reductions while maintaining quality., • Demonstrates full ownership of shift operations, managing customer service, team performance, and overall restaurant functionality., • Expected Knowledge:, • Advanced understanding of Labor Percentage, Food Costs, and how to adjust operations to meet cost control goals., • Strong inventory management skills., • Ability to adjust staffing and inventory based on business needs. Shift Level 4: • Availability: Open availability, with flexibility to work shifts across all days, including weekends and holidays., • Responsibilities:, • Runs shift independently and take on additional leadership and operational responsibilities., • Manages all aspects of the shift, including Labor Percentage, Inventory, Food Orders, and Food Costs., • Supports team development and provides mentorship to junior Shift Managers., • Oversee full shift operations and contribute to achieving restaurant performance goals., • Expected Knowledge:, • Deep understanding of Labor Percentage and Food Costs and ability to proactively adjust to maintain profitability., • Strong leadership skills, with the ability to coach and guide team members and other Shift Managers. Qualifications To succeed in this role, candidates must meet the following qualifications and demonstrate the ability to perform all essential duties. These requirements are representative of the skills, knowledge, and abilities required for each level of Shift Manager: Core Qualifications (Applicable to All Shift Manager Levels) • Passion for Excellence: A strong desire to positively impact the customer experience and uphold the highest standards of service in the Quick Service Restaurant (QSR) industry., • Education and Experience:, • High School diploma or GED., • Must be at least 18 years of age., • ServSafe Certification is required., • Communication Skills:, • Strong verbal communication skills, with the ability to listen attentively, understand others’ perspectives, and respond clearly., • Capable of influencing others and gaining commitment to maintain high operational standards., • Mathematical Ability:, • Basic math skills to handle tasks such as counting change, totaling orders, and analyzing labor and food costs., • Reasoning Ability:, • Ability to exercise sound judgment and make decisions based on situational needs and operational goals., • Flexibility:, • Capable of handling day-to-day challenges confidently, adapting to multiple demands, and adjusting priorities quickly in a dynamic environment., • Leadership:, • Proven ability to manage teams effectively, ensuring high customer satisfaction and smooth operations., • Exhibits a positive and professional appearance, demeanor, and energy at all times. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Equipment Fryers, broilers, flat top grills, walk in freezer, menu boards, computers, cash registers, warmer lights, filtering machines, oven, steam units, holding cabinets, slicers, storage units, soda fountain hook up station, microwave ovens, insulated oven mitts, toasters, cooking utensils, and drive through communication systems. Environmental Conditions: • The employee is subject to environmental conditions, protection from weather conditions, but not necessarily from temperature changes., • The employee is subject to both environmental conditions; work activities both inside and outside., • The employee is subject to extreme cold temperatures below 32 degrees for periods of time., • The employee is exposed to hazards which include a variety of physical conditions, such as moving mechanical parts, electrical current, exposure to high heat of chemicals., • The employee is subject to one or more of the following conditions: fumes, odors, dust, mist, gases or poor ventilation. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to handle or feel; reach with hands and arms and be able to communicate. The employee is frequently required to walk; stoop, kneel, crouch, and push. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.

Job Description The Shift Manager works under the direction of the Restaurant Manager. They work directly with team members and operate shifts in a restaurant. As a Shift Manager, there are multiple levels of responsibility and development. Progression through these levels is based on demonstrated skills, experience, and operational knowledge. All levels require full certification in the position (completion of Shift Leader (SL) training path and ServSafe certification). All levels of Shift Managers, regardless of their level, are responsible for the following key duties: • Ensure the restaurant is clean and well-maintained, and that all company procedures are followed. Uphold the standards for food quality, cleanliness, sanitation, and customer service., • Effectively manage costs within budgeted levels, including cash handling, food products, labor, paper supplies, energy consumption, and other operational expenses., • Responsible for cash register setup and smooth shift transitions during shift changes., • Oversee and manage the shift, supervising and directing team members, maintaining clear communication, and ensuring a focus on customer service., • When requested, train new and existing team members in various job stations and operational procedures, • Complete all required shift management administrative tasks, including reports, sales readings, and necessary documentation., • Post sales readings, and conduct shift awareness walk-throughs to ensure operations are running smoothly., • Observe and enforce all safety and security procedures, ensuring a safe working environment for both staff and customers. Additional Responsibilities and Requirements Based on Shift Manager Level As Shift Managers progress through different levels, they take on additional responsibilities: Shift Level 1: • Availability: At least 3 days per week, with a minimum of one full shift (open, mid, and/or close)., • Responsibilities:, • Runs a minimum of 1 shift on their own per week., • Expected Knowledge:, • Basic understanding of Labor Percentage and its impact on operations. Shift Level 2: · Availability: At least 4 days per week, including 2 full shifts (opening, mid, and/or close). Must be available to close 1-2 days per week. · Responsibilities: o Runs shifts independently, including managing team members and ensuring operations are smooth. o Take responsibility and complete Inventory Processes and manage stock levels. o Good understanding of Labor Percentage and takes action to ensure it aligns with budgeted levels. o Demonstrates a clear understanding of operational needs and adjusts staffing and resources accordingly. · Expected Knowledge: o Intermediate understanding of Labor Percentage and how to react and adjust staffing based on this metric. o Experience managing inventory processes and order planning. Shift Level 3: • Availability: At least 5 days per week, including 1 weekend day, with at least 3 full shifts (open, mid, and/or close). Must be available to close at least 3 days per week., • Responsibilities:, • Runs shift independently with minimal supervision., • Completes Inventory processes and Food Orders., • Has an advanced understanding of Food Costs and actively manages food cost reductions while maintaining quality., • Demonstrates full ownership of shift operations, managing customer service, team performance, and overall restaurant functionality., • Expected Knowledge:, • Advanced understanding of Labor Percentage, Food Costs, and how to adjust operations to meet cost control goals., • Strong inventory management skills., • Ability to adjust staffing and inventory based on business needs. Shift Level 4: • Availability: Open availability, with flexibility to work shifts across all days, including weekends and holidays., • Responsibilities:, • Runs shift independently and take on additional leadership and operational responsibilities., • Manages all aspects of the shift, including Labor Percentage, Inventory, Food Orders, and Food Costs., • Supports team development and provides mentorship to junior Shift Managers., • Oversee full shift operations and contribute to achieving restaurant performance goals., • Expected Knowledge:, • Deep understanding of Labor Percentage and Food Costs and ability to proactively adjust to maintain profitability., • Strong leadership skills, with the ability to coach and guide team members and other Shift Managers. Qualifications To succeed in this role, candidates must meet the following qualifications and demonstrate the ability to perform all essential duties. These requirements are representative of the skills, knowledge, and abilities required for each level of Shift Manager: Core Qualifications (Applicable to All Shift Manager Levels) • Passion for Excellence: A strong desire to positively impact the customer experience and uphold the highest standards of service in the Quick Service Restaurant (QSR) industry., • Education and Experience:, • High School diploma or GED., • Must be at least 18 years of age., • ServSafe Certification is required., • Communication Skills:, • Strong verbal communication skills, with the ability to listen attentively, understand others’ perspectives, and respond clearly., • Capable of influencing others and gaining commitment to maintain high operational standards., • Mathematical Ability:, • Basic math skills to handle tasks such as counting change, totaling orders, and analyzing labor and food costs., • Reasoning Ability:, • Ability to exercise sound judgment and make decisions based on situational needs and operational goals., • Flexibility:, • Capable of handling day-to-day challenges confidently, adapting to multiple demands, and adjusting priorities quickly in a dynamic environment., • Leadership:, • Proven ability to manage teams effectively, ensuring high customer satisfaction and smooth operations., • Exhibits a positive and professional appearance, demeanor, and energy at all times. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Equipment Fryers, broilers, flat top grills, walk in freezer, menu boards, computers, cash registers, warmer lights, filtering machines, oven, steam units, holding cabinets, slicers, storage units, soda fountain hook up station, microwave ovens, insulated oven mitts, toasters, cooking utensils, and drive through communication systems. Environmental Conditions: • The employee is subject to environmental conditions, protection from weather conditions, but not necessarily from temperature changes., • The employee is subject to both environmental conditions; work activities both inside and outside., • The employee is subject to extreme cold temperatures below 32 degrees for periods of time., • The employee is exposed to hazards which include a variety of physical conditions, such as moving mechanical parts, electrical current, exposure to high heat of chemicals., • The employee is subject to one or more of the following conditions: fumes, odors, dust, mist, gases or poor ventilation. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to handle or feel; reach with hands and arms and be able to communicate. The employee is frequently required to walk; stoop, kneel, crouch, and push. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.

Job Description The Shift Manager works under the direction of the Restaurant Manager. They work directly with team members and operate shifts in a restaurant. As a Shift Manager, there are multiple levels of responsibility and development. Progression through these levels is based on demonstrated skills, experience, and operational knowledge. All levels require full certification in the position (completion of Shift Leader (SL) training path and ServSafe certification). All levels of Shift Managers, regardless of their level, are responsible for the following key duties: • Ensure the restaurant is clean and well-maintained, and that all company procedures are followed. Uphold the standards for food quality, cleanliness, sanitation, and customer service., • Effectively manage costs within budgeted levels, including cash handling, food products, labor, paper supplies, energy consumption, and other operational expenses., • Responsible for cash register setup and smooth shift transitions during shift changes., • Oversee and manage the shift, supervising and directing team members, maintaining clear communication, and ensuring a focus on customer service., • When requested, train new and existing team members in various job stations and operational procedures, • Complete all required shift management administrative tasks, including reports, sales readings, and necessary documentation., • Post sales readings, and conduct shift awareness walk-throughs to ensure operations are running smoothly., • Observe and enforce all safety and security procedures, ensuring a safe working environment for both staff and customers. Additional Responsibilities and Requirements Based on Shift Manager Level As Shift Managers progress through different levels, they take on additional responsibilities: Shift Level 1: • Availability: At least 3 days per week, with a minimum of one full shift (open, mid, and/or close)., • Responsibilities:, • Runs a minimum of 1 shift on their own per week., • Expected Knowledge:, • Basic understanding of Labor Percentage and its impact on operations. Shift Level 2: · Availability: At least 4 days per week, including 2 full shifts (opening, mid, and/or close). Must be available to close 1-2 days per week. · Responsibilities: o Runs shifts independently, including managing team members and ensuring operations are smooth. o Take responsibility and complete Inventory Processes and manage stock levels. o Good understanding of Labor Percentage and takes action to ensure it aligns with budgeted levels. o Demonstrates a clear understanding of operational needs and adjusts staffing and resources accordingly. · Expected Knowledge: o Intermediate understanding of Labor Percentage and how to react and adjust staffing based on this metric. o Experience managing inventory processes and order planning. Shift Level 3: • Availability: At least 5 days per week, including 1 weekend day, with at least 3 full shifts (open, mid, and/or close). Must be available to close at least 3 days per week., • Responsibilities:, • Runs shift independently with minimal supervision., • Completes Inventory processes and Food Orders., • Has an advanced understanding of Food Costs and actively manages food cost reductions while maintaining quality., • Demonstrates full ownership of shift operations, managing customer service, team performance, and overall restaurant functionality., • Expected Knowledge:, • Advanced understanding of Labor Percentage, Food Costs, and how to adjust operations to meet cost control goals., • Strong inventory management skills., • Ability to adjust staffing and inventory based on business needs. Shift Level 4: • Availability: Open availability, with flexibility to work shifts across all days, including weekends and holidays., • Responsibilities:, • Runs shift independently and take on additional leadership and operational responsibilities., • Manages all aspects of the shift, including Labor Percentage, Inventory, Food Orders, and Food Costs., • Supports team development and provides mentorship to junior Shift Managers., • Oversee full shift operations and contribute to achieving restaurant performance goals., • Expected Knowledge:, • Deep understanding of Labor Percentage and Food Costs and ability to proactively adjust to maintain profitability., • Strong leadership skills, with the ability to coach and guide team members and other Shift Managers. Qualifications To succeed in this role, candidates must meet the following qualifications and demonstrate the ability to perform all essential duties. These requirements are representative of the skills, knowledge, and abilities required for each level of Shift Manager: Core Qualifications (Applicable to All Shift Manager Levels) • Passion for Excellence: A strong desire to positively impact the customer experience and uphold the highest standards of service in the Quick Service Restaurant (QSR) industry., • Education and Experience:, • High School diploma or GED., • Must be at least 18 years of age., • ServSafe Certification is required., • Communication Skills:, • Strong verbal communication skills, with the ability to listen attentively, understand others’ perspectives, and respond clearly., • Capable of influencing others and gaining commitment to maintain high operational standards., • Mathematical Ability:, • Basic math skills to handle tasks such as counting change, totaling orders, and analyzing labor and food costs., • Reasoning Ability:, • Ability to exercise sound judgment and make decisions based on situational needs and operational goals., • Flexibility:, • Capable of handling day-to-day challenges confidently, adapting to multiple demands, and adjusting priorities quickly in a dynamic environment., • Leadership:, • Proven ability to manage teams effectively, ensuring high customer satisfaction and smooth operations., • Exhibits a positive and professional appearance, demeanor, and energy at all times. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Equipment Fryers, broilers, flat top grills, walk in freezer, menu boards, computers, cash registers, warmer lights, filtering machines, oven, steam units, holding cabinets, slicers, storage units, soda fountain hook up station, microwave ovens, insulated oven mitts, toasters, cooking utensils, and drive through communication systems. Environmental Conditions: • The employee is subject to environmental conditions, protection from weather conditions, but not necessarily from temperature changes., • The employee is subject to both environmental conditions; work activities both inside and outside., • The employee is subject to extreme cold temperatures below 32 degrees for periods of time., • The employee is exposed to hazards which include a variety of physical conditions, such as moving mechanical parts, electrical current, exposure to high heat of chemicals., • The employee is subject to one or more of the following conditions: fumes, odors, dust, mist, gases or poor ventilation. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to handle or feel; reach with hands and arms and be able to communicate. The employee is frequently required to walk; stoop, kneel, crouch, and push. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.

Company Description GPI Power LLC, the U.S. subsidiary of Green Power International, is an authorized sales and service provider of Olympian generator sets, a Caterpillar brand, across the United States. GPI Power supplies diesel and gas generator sets up to 200 kW for a wide range of standby and prime-power applications. By combining globally recognized, Caterpillar-backed product quality with responsive local sales, engineering, commissioning, and after-sales support, GPI Power is building a dependable power-generation organization for customers and channel partners throughout the United States. Role Overview GPI Power is hiring Regional Sales Managers to develop the Olympian generator business across selected U.S. territories. Available territories include: • Texas, • New England, • Mid-Atlantic, • Great Lakes and Ohio Valley The Texas position will be based at GPI Power’s Houston headquarters and will work on-site while covering the broader Texas market, including Houston, Dallas, San Antonio and other cities. The New England, Mid-Atlantic, and Great Lakes and Ohio Valley positions will be remote within their assigned territories. Candidates must reside in or be willing to relocate to the territory they will manage. Applicants should indicate their preferred territory and current city and state when applying. The Regional Sales Manager will be responsible for developing sales through a combination of qualified channel partners and direct relationships with electrical contractors, EPC companies, engineering firms, consultants, developers, and end users. The role requires strong knowledge of the regional power-generation market and a hands-on approach to territory development. Key Responsibilities • Develop and execute a regional business plan aligned with GPI Power’s U.S. growth objectives., • Build market awareness and establish Olympian as a dependable generator brand within the assigned territory., • Identify, evaluate, appoint, and develop qualified dealers, distributors, and service-capable channel partners., • Prioritize strong channel partners that can actively develop the market, maintain appropriate inventory, and share the working-capital requirements of regional growth., • Develop direct sales opportunities with electrical contractors, EPC companies, engineering firms, consultants, developers, utilities, and commercial and industrial customers., • Build a healthy sales pipeline across standby and prime-power applications., • Identify regional market opportunities, customer segments, projects, competitors, and pricing trends., • Develop relationships with key decision-makers and maintain consistent customer and partner engagement., • Prepare and support quotations, proposals, commercial negotiations, and order closures., • Work closely with Engineering, Operations, Service, and Supply Chain teams to ensure customer requirements are properly addressed., • Support dealer onboarding, product training, sales development, and ongoing channel performance., • Coordinate customer visits, project discussions, technical presentations, and factory or product demonstrations when required., • Maintain accurate opportunity, customer, and sales activity information in the company’s CRM system., • Provide regular sales forecasts, pipeline reports, market intelligence, and competitor updates., • Participate in trade shows, conferences, dealer meetings, and other regional business-development activities., • Support aftermarket opportunities, including spare parts, maintenance agreements, and service-related sales., • Achieve agreed revenue, margin, customer-acquisition, pipeline, and channel-development targets. Key Performance Areas • Regional revenue and gross-margin growth, • Qualified pipeline development and conversion, • New customer acquisition, • Dealer and channel-partner onboarding, • Dealer activation and productivity, • Direct-sales development, • Forecast accuracy, • Market penetration, • Customer and partner relationship development Qualifications • Minimum of 7 years of relevant sales or business-development experience in power generation, generator sets, industrial engines, electrical equipment, distributed energy, or related technical products., • Demonstrated experience managing a sales territory and delivering measurable revenue growth., • Strong understanding of diesel and/or gas generator sets, standby power, prime power, or related power solutions., • Experience developing dealers, distributors, manufacturer representatives, or other channel partners., • Experience generating direct business through electrical contractors, EPC companies, engineering firms, consultants, developers, or end users., • Established relationships within the assigned regional power-generation market are strongly preferred., • Strong commercial judgment and experience with pricing, proposals, negotiations, forecasting, and pipeline management., • Ability to work independently and build a territory in a growing organization., • Strong communication, presentation, relationship-management, and negotiation skills., • Experience using CRM and sales-management platforms such as Salesforce, HubSpot, or an equivalent system., • Bachelor’s degree in Engineering, Business Administration, Sales, or a related discipline is preferred. Equivalent relevant industry experience will also be considered., • Valid U.S. driver’s license and willingness to travel regularly within the assigned territory., • Must be legally authorized to work in the United States. Work Location and Travel This posting covers multiple regional openings: • Texas: On-site at GPI Power’s Houston headquarters, with responsibility for the Texas market and regular regional travel., • New England: Remote within the assigned region, with regular regional travel., • Mid-Atlantic: Remote within the assigned region, with regular regional travel., • Great Lakes and Ohio Valley: Remote within the assigned region, with regular regional travel. Candidates must reside in or be willing to relocate to their assigned territory. Compensation GPI Power offers a highly competitive compensation package consisting of a base salary and a performance-based incentive opportunity. Final compensation will depend on the candidate’s experience, qualifications, territory, and demonstrated industry track record. Why Join GPI Power • Help establish and grow the Olympian generator business in the United States., • Build a regional market through both channel development and direct sales., • Work with an internationally recognized generator brand backed by Caterpillar manufacturing quality., • Take ownership of a developing territory with meaningful long-term growth potential. Equal Opportunity Employer GPI Power LLC is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other status protected by applicable law.

Summary – We are seeking a highly technical, deeply connected Regional Sales Manager to lead our expansion into the data center market. Operating remotely out of Texas, this individual will be responsible for driving revenue growth by selling our core portfolio of power solutions—specifically power transformers, distribution transformers (oil and dry), reactive power compensation, and harmonic mitigation systems. The ideal candidate already possesses a robust network of data center developers, consulting engineers, and Engineering, Procurement, Construction (EPC) and Management (EPCM) firms within the Texas and overall data center market. Job Responsibilities – Activities: Functions: • Territory & Pipeline Development: Prospect, develop, and close large-scale infrastructure projects within the Texas data center market. Leverage these opportunities for opportunities elsewhere in the data center segment., • Technical Solution Selling: Serve as the sales lead on the application of power and distribution transformers, harmonic filters, and reactive power compensation equipment for mission-critical facilities., • Strategic Networking: Build and maintain deep relationships with key decision-makers, including end-users (hyperscalers, colocation providers), electrical contractors, specifying engineers, and EPCs and EPCMs., • Project Lifecycle Management: Navigate sometimes long, complex sales cycles from initial design/specification through bidding, procurement, and delivery., • Market Intelligence: Provide ground-level feedback on competitor pricing, lead times, and emerging technical specifications., • Cross-Functional Collaboration: Work closely with our engineering, manufacturing, and supply chain teams to ensure proposals meet customer specifications and delivery timelines. Education - Experience: • Required Education: Bachelor’s degree in electrical engineering or related field, • Experience: Minimum 7–10 years of successful B2B technical sales experience in the commercial/industrial electrical industry. Required Skills, Competencies, Authorities and Training Needs: • Industry Expertise: A proven track record of selling medium/high voltage power equipment, specifically into the data center market., • Technical Acumen: Deep understanding of power distribution, power quality (harmonics, power factor), and the ability to interpret single-line electrical diagrams, • Established Network: Active relationships with major Texas-based data center developers, EPC and EPCMs, and specialized electrical contractors., • Travel: Ability to travel extensively to US data center stakeholders, with occasional travel to corporate headquarters or manufacturing facilities., • Self-Starter: Demonstrated ability to work autonomously in a remote environment, managing a territory like an independent business. Strong written & verbal communications as well as customer service skills., • US Citizen

Senior Physical Engineer – Renewables United States (Remote) Salary Range: $100K - $150K / year Based on the Denver, Colorado labor market. Location: Lakewood, CO (local/in-office) or full-time remote candidates. Role Overview: As a Senior Physical Engineer in the Renewables group, you will be responsible for performing engineering design and analysis under the responsible charge of a Professional Engineer. You will support client projects and provide quality deliverables that are on time and within the defined budget. Essential Responsibilities: What you will do: • Phase Manager (PPM): Your primary responsibility will be project-based leadership, with short-term focus on project scope, budget, task delegation, client interaction and execution, and ensuring technical quality. Consult regularly with the Team Lead on key decisions and activities., • QA / QC work: Implement the NEI Quality Assurance Plan. Check the work of designers, drafters, and engineers for overall quality and accuracy., • Training: Train junior level engineers and designers in areas of physical design of electrical substations & BESS facilities., • Writing: Assist with developing technical guidelines and training documents. Additional Responsibilities: • Work closely with Technical Directors and Team Leads on projects within the department., • Perform the review of detailed physical engineering for all aspects of electric power substations & BESS facilities including multi-disciplinary coordination., • Typical design products might include general arrangements, elevation views, site layout, bill of materials, equipment specifications, bus sizing for ampacity and structural requirements, grounding plan and details, and conduit plan and details., • Review submittals for conformance with (owner, client) specifications and design to meet all required codes., • Prepare hand and computer-based calculations and models for physical designs., • Prepare a variety of documents and reports associated with projects including cost estimates, budget reports, and proposals for complex projects., • Manage deliverables and deadlines to ensure they are submitted on time for both internal QA/QC deadlines and external deadlines to client., • Ensure that client requirements, specifications, and expectations are being met., • Provide coaching and mentoring to Team Members., • Perform occasional field inspection and construction supervision services when needed., • Check the work of designers, drafters, and engineers for overall quality and accuracy., • Maintain a strong understanding and comprehension of applicable Codes and Standards., • Attend conferences, training workshops, seminars, undergraduate, and graduate classes as appropriate for advancement and as required to maintain quality of work., • Complete safety training and follow safety rules and guidelines. Requirements: • Education: Bachelor’s in Civil or Electrical Engineering or Civil Engineering Technology from an accredited institution., • Experience: 5+ years of relevant engineering or field experience., • Licensure: FE or PE preferred., • Skills: Proficiency with AutoCAD, MathCAD, and Microsoft Office Suite. Effective written and oral communication skills. Good interpersonal skills. Note: Applicants must be currently authorized to work in the United States on a full-time basis. Work Environment: Office setting with some field work required. Travel: Typical: 10 – 15% About NEI: Serving Others. Enriching Environment. Improving Continually. Quality Results. Voted as a top workplace by the Denver Post for five straight years (2020 - 2024), our values have been woven into the fabric of who we are since 1982, guiding our decision-making throughout the years. As an engineering services firm, NEI’s mission is to create a great organization that serves people and solves problems. Since NEI’s founding, we have developed a culture of collaboration and accountability across our teams and departments, and externally with our clients across the United States. We believe in two core ideas: hiring great people and celebrating our team members' diverse backgrounds and unique experiences; bringing in new, unique, and exciting perspectives that can only strengthen NEI as we chart our path into the future. We are a proud equal opportunity employer, and we do not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information. Benefits: We believe that taking care of our team members is of the utmost importance. We strive to foster a community of belonging, professional development, and industry involvement; providing our team with the benefits, tools, and support systems to excel in their roles. Our comprehensive benefits package includes: • 100% employer-paid team member premiums for Medical, Dental, Vision, • Basic Life Insurance, and Long-Term Disability, • Voluntary Life Insurance, • 401(k) with employer matching; 100% immediate vesting, • Annual & discretionary bonus programs, • Paid vacation and sick time, • Employer-paid licensure (FE/PE), certifications, seminars, & conferences, • Paid parental leave, • Tuition reimbursement, • Eight (8) paid holidays including a floating holiday to use at your discretion, • Annual Team Building, • Hybrid work environment with remote flexibility, • Career development, training, and coaching opportunities, • Pet insurance NEI Electric Power Engineering participates in E-Verify and will provide the federal government with your completed Form I-9 to confirm your work authorization in the United States.

About VIYA VIYA Environmental is a pollution remediation company formed by the strategic alliance of industry pioneers McMillan-McGee (Mc2) and ORIN Technologies (ORIN) and backed by GEF Capital. VIYA is one of the first remediation companies to offer biological, chemical and thermal technologies as independent or fully integrated solutions through a single, technology-agnostic platform. The outcome-driven approach accelerates cleanup timelines, reduces uncertainty, and enables adaptable site management for complex contaminants, including VOCs and PFAS. VIYA delivers sophisticated solutions for some of the world’s most challenging environmental remediation projects. The Role We are currently seeking an Environmental Technician based in the United States (location with easy access to a major airport). This is a great opportunity with an innovative organization that embraces new ideas and actively invests in research and development opportunities. Key Responsibilities The Environmental Technician assists with onsite remediation projects, field operations, equipment maintenance, data entry, data evaluation, and reporting. • Help install, test, and run primarily thermal and electrical heating systems that treat impacted soil and groundwater., • Maintain and clean field equipment and systems. Check pipes, electrical setups, and monitoring tools to keep cleanup systems working 24/7., • Collect soil, vapor, or water samples and record field data. Perform data entry and documentation of daily field activities., • Comply with all company, client, and regulatory safety requirements., • Communicate effectively with project engineers, sub-contractors, and clients. Qualifications & Experience • High school diploma. Course work in environmental science, chemistry, or related field is a plus., • Prior work experience in environmental remediation or other industrial operations is preferred., • Strong work ethic and reliability., • Mechanical aptitude., • Ability to lift up to 55 pounds and perform field work in physically demanding situations., • Will need to obtain OSHA 40-hour Hazwoper training., • Driver’s license with good driving record., • Strong written and oral communication skills., • Willingness to travel to project sites (up to 75% of the time), primarily in the US but could potentially be international. Must have (or be able to obtain) passport for work-related travel. Schedule can vary but is generally 3 weeks on/1 week off). Why VIYA • Opportunity to work on complex, technically challenging remediation projects., • Tackle high-impact environmental challenges and contribute to meaningful, real-world solutions., • Gain exposure to a wide range of advanced remediation technologies., • Make a direct environmental impact while working in a rapidly growing industry.

The role provides support for the installation, operation, and maintenance of Intellian fielded products worldwide in a 24/7 operational environment. The primary focus of this position is the installation and maintenance of Intellian Ground Gateway Terminals. *This position can be based in our California or Florida offices, or remote for highly qualified candidates. **Compensation for this role may vary based on the employee’s physical work location. Main Roles & Responsibilities: • Perform Intellian assigned duties onboard, on-site and/or field Support of Intellian’s products in a global environment., • Be able to perform installation and operation of Intellian products efficiently and effectively., • Understand operation of all Intellian product and be able to troubleshoot and diagnose failures on terminals equipped with Intellian products and/or services., • Work individually without support if in a remote location with correct tools and approved spares as required for job responsibilities., • Provide onsite support for Intellian ECBU and Maritime business partners globally., • Solid computing and reporting skills for maintaining data within Intellian CRM (Salesforce), as well as document handling on google drive or Microsoft office suite., • Provide technical guidance to internal and external stakeholders for Intellian technical support organization., • Ability to travel at very short notice anywhere globally., • Maintain high standard of professionalism, workmanship and cleanliness on customer site., • Adhere to all safety regulations, perform risk assessment and maintain required PPE., • Work with teams of both internal staff, subcontractors, dealers and customers., • Be self-sufficient if need be with travel plans, accommodation and attendance when unable to contact coordination or manager., • Clear, concise daily reporting to internal and external stakeholders., • Control expenditure when travelling on behalf of the company., • Completing and providing RMA forms with stock returns or inventory adjustments., • PUP, Case, TCN and Work Order; Creation, updates and completion within salesforce., • Maintain good working relationships with all colleagues and staff with the ability to assist Working with all teams and staff to assist where resource is needed., • Strong communication skills for liaising with HQ TS in Korea, as well as regional offices in EMEA and APAC. Qualifications & Requirements: • Bachelor’s Degree in an engineering principle or equivalent industry experience in a Field Support role., • 2+ years’ experience in troubleshooting and triage of technical issues in a fast paced environment, to support customers., • Experience with VSAT installation, commissioning, troubleshooting and repair., • IT Network troubleshooting skills; DHCP, TCP/IPv4 & v6, Sub-netting, routing, VLANS, etc., • Ability to work a flexible schedule in a 24x7 environment as needed to support round-the-clock operations., • Good computer skills, including Word, Excel, Outlook and Google Docs., • Strong electrical and mechanical skills. Preferred Skills & Experience • 3 years’ experience in a technical position within the maritime or teleport environment., • Experience with Installation & Maintenance of Ground Gateway or Earth Station Antenna systems., • Experience on satellite communication and other RF technologies., • Written and Verbal skills in English, Spanish, French or Korean., • Salesforce & SAP Experience. Physical Requirements • Physically able to lift/carry at least 50lbs and climb ladders, masts. Rigging, etc., • Ability to use forklift (training would be provided)., • Ability to adapt to urgent situations and good at working under a timeline pressure. Hours & Place of Work: • Flexibility to work weekends and holidays., • Travel up to 75% domestic and overseas., • Extended travel up to 2 weeks required. About Intellian: Intellian is the world’s leading provider of satellite antennas and terminals, with a mission to empower connectivity so connectivity can empower the world. We are driven by a passion for innovation and agile responsiveness to customer needs. As the crucial link between satellite networks and millions of people on Earth, Intellian’s leading technology and antennas empower global connectivity across oceans and continents, organizations, and communities. Strategic thinking, an obsession with quality, and a proven ability to deliver enable Intellian to invent for the future, creating mutual success for partners and customers as the world’s connectivity needs evolve. Benefits: We offer a comprehensive benefits package, including flexible time off and paid holidays. Eligible employees also have access to medical, dental, and vision insurance, as well as short-term and long-term disability coverage. A 401(k) plan with employer safe harbor contributions is available. Additional compensation elements, such as annual performance-based bonuses, may be offered depending on the role.

About Ascendion Ascendion is a full-service digital engineering solutions company. We make and manage software platforms and products that power growth and deliver captivating experiences to consumers and employees. Our engineering, cloud, data, experience design, and talent solution capabilities accelerate transformation and impact for enterprise clients. Headquartered in New Jersey, our workforce of 6,000+ Ascenders delivers solutions from around the globe. Ascendion is built differently to engineer the next. Ascendion | Engineering to elevate life We have a culture built on opportunity, inclusion, and a spirit of partnership. Come, change the world with us: • Build the coolest tech for the world’s leading brands, • Solve complex problems - and learn new skills, • Experience the power of transforming digital engineering for Fortune 500 clients, • Master your craft with leading training programs and hands-on experience Experience a community of change makers! Join a culture of high-performing innovators with endless ideas and a passion for tech. Our culture is the fabric of our company, and it is what makes us unique and diverse. The way we share ideas, learning, experiences, successes, and joy allows everyone to be their best at Ascendion. About the Role We are seeking a senior BAS (Building Automation System) Design Engineer to support building automation and controls delivery for critical facility infrastructure. The role begins with technical review of BAS vendor submittal packages against controls design standards and expands as the business grows into producing BAS submittal packages directly, following the same structure and rigor used today for EPMS submittals. This is a hands-on engineering role. The successful candidate operates independently at a senior level, sets technical direction on their reviews and designs, and provides guidance to more junior controls staff. Job Title: Service Engineer Key Responsibilities: Phase 1: BAS vendor submittal review • Review BAS vendor and integrator submittals, shop drawings, and controls programming for compliance with controls design standards and design intent., • Review submittal content including sequences of operations, points lists, controls schematics, riser and network architecture diagrams, panel and device schedules, bill of materials, and product data., • Issue clear, technically grounded review comments, track them to closure through package revisions, and recommend approval status., • Validate controls hardware and communication architectures across common protocols (BACnet, Modbus, LonWorks, MQTT) and platforms (DDC controllers, PLC and SCADA)., • Confirm HVAC, mechanical, and electrical controls integration meets reliability, resiliency, and operability requirements for critical and mission-critical facilities., • Coordinate with mechanical, electrical, and facility engineering counterparts on design reviews, RFIs, and field issues raised against submittals. Phase 2: BAS submittal package production • Produce BAS submittal packages directly, following the same structure and rigor used today for EPMS submittal packages., • Develop and own BAS and DDC deliverables: sequences of operations, points lists, network architecture, riser diagrams, controls schematics, panel and device schedules, and specifications., • Author and maintain design standards, guide specifications, templates, and reference designs for building automation and controls., • Drive resolution of design gaps and standardization opportunities identified during submittal review., • Contribute to design reviews and provide technical guidance to junior controls design engineers. Minimum Qualifications: • A bachelor’s degree in mechanical, Electrical, Controls, or a related engineering discipline, or equivalent professional experience., • Demonstrated experience reviewing BAS vendor submittal packages against a design standard, issuing technically grounded comments, and dispositioning them to closure through package revisions., • The ability to independently produce complete BAS design packages, including sequences of operations, points lists, controls schematics, riser and network architecture diagrams, panel and device schedules, and specifications., • Strong working knowledge of building automation protocols such as BACnet and Modbus, and of DDC and PLC controls platforms., • Working knowledge of HVAC and mechanical and electrical systems as they relate to controls integration., • Proficiency with design and documentation tools such as AutoCAD, Revit, Bluebeam, and Visio., • Strong written and verbal communication, with the ability to represent design intent to integrators, vendors, and internal stakeholders. Desired Qualifications: • Controls design experience in mission-critical, data center, or critical facility environments., • Professional Engineer (PE) license or equivalent certification., • Experience authoring or maintaining controls design standards across a portfolio of projects., • Familiarity with electrical power monitoring system submittal packages and how they are structured., • Prior experience delivering in a vendor or consulting model. Location: Remote Must-Have HARD Skills 10+ years of experience in: • BAS and controls design, producing complete BAS design packages, including sequences of operations, points lists, controls schematics, riser and network architecture diagrams, panel and device schedules, and specifications., • Submittal review against a design standard, reviewing BAS vendor and integrator submittals, shop drawings, and controls programming for compliance with design intent, issuing technically grounded comments and dispositioning them to closure., • Building automation protocols and controls platforms, working hands-on with BACnet and Modbus and with DDC and PLC controls platforms, including network architecture and device-level integration. Salary Range: The salary for this position is between $1,49,700 - $1,62,000 annually. Factors which may affect pay within this range may include geography/market, skills, education, experience, and other qualifications of the successful candidate. Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements:?[medical insurance] [dental insurance] [vision insurance] [401(k) retirement plan] [long-term disability insurance] [short-term disability insurance] [5 personal days accrued each calendar year. The paid time off benefits meet the paid sick and safe time laws that pertains to the City/ State] [10-15 days of paid vacation time] [6 paid holidays and 1 floating holiday per calendar year] [Ascendion Learning Management System] Want to change the world? Let us know. Tell us about your experiences, education, and ambitions. Bring your knowledge, unique viewpoint, and creativity to the table. Let’s talk!

As an Electrical Engineer in the BESS group, you will be responsible for performing engineering design and analysis under the responsible charge of a Professional Engineer. You will be a part of an integrated design team and are responsible for coordinating with team members to meet project schedules and deliverables on time and within the defined budget. ***We are currently hiring for multiple positions at various levels of Electrical Engineering skill. If you're interested, please apply! Salary Range: $90,000 - $120,000 / year The salary range above is based upon the Denver, Colorado labor market. This opportunity is available to both local / in-office (Lakewood, CO) and full-time remote candidates. Essential Responsibilities • Collaborates with multi-disciplinary engineering teams to perform detailed physical and electrical design and engineering for all aspects of battery energy storage systems (BESS)., • Typical design products might include BESS equipment general arrangements, single line diagrams, elevations, connection details, bill of materials, construction details, grounding details, conduit plans, illumination plans, etc., • Prepares computer-based models and performs power system studies on utility scale BESS projects as required., • Typical electrical power system studies might include BESS equipment sizing, specification, and selection, load flow, reactive power, ampacity, short circuit, grounding, illumination, arc flash, harmonics, system loss, etc., • Writes material, equipment, and construction specifications., • Reviews spec sheets and submittals for conformance with specifications and design., • Prepares a variety of documents and reports associated with projects including cost estimates, budget reports, and studies., • Provides field assistance, troubleshooting, and observation reports, as required., • Reviews the work of Designers, Drafters, and Field Service Personnel for general quality and accuracy, as required., • Maintains a strong understanding and comprehension of applicable Codes and Standards., • Maintains strong and responsive Company-Client relationships, particularly for communication pertaining to specific assignments and meeting topics., • Maintains high ethical and professional standards., • Works additional time beyond 40 hours/week to complete projects, proposals and/or administrative functions, as required., • Attends conferences, training workshops, seminars, regular undergraduate, and graduate classes as appropriate for advancement and as required to maintain quality of work., • Attends safety training and follow safety rules and guidelines., • Other job-related responsibilities as assigned. Must Have • Education: Bachelor’s in Electrical Engineering or Electrical Engineering Technology from an accredited institution, electric power option preferred, • Experience: 1 – 4 years of relevant engineering or field experience, • Licensure: FE, PE is a plus, but not required, • Experience with AutoCAD, • Possesses effective written and oral communications skills, • Good interpersonal and people skills, • Applicants must be currently authorized to work in the United States on a full-time basis Nice to Have • Experience with utility-scale BESS, • Proficiency with AutoCAD/AutoCAD Electrical, electrical power system study software (PowerFactory, ETAP), CYMCAP, CDEGS/WinIGS, Visual Lighting, etc., • Experience with 3D BIM design software, • Proficiency in Microsoft Office including Excel, Word, and standard computer software Work Environment: Work is performed in an office setting and some field work may be required Travel: Typical: 15 – 25% About NEI Electric Power Engineering Serving Others. Enriching Environment. Improving Continually. Quality Results. Voted as a top workplace by the Denver Post for three straight years (2020, 2021, 2022), our values have been woven into the fabric of who we are since 1982, guiding our decision making throughout the years. As an engineering services firm, NEI’s mission is to create a great organization that serves people and solves problems. Since NEI’s founding, we have developed a culture of collaboration and accountability, both across our teams and departments, and externally with our clients across the United States. We believe in two core ideas: hiring great people and celebrating our team members diverse background and unique experiences; bringing in new, unique, and exciting perspectives that can only strengthen NEI as we chart out path into the future. We are a proud equal opportunity employer and we do not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, martial status, disability, gender identity, gender expression, veteran status, or genetic information. Team Member Benefits We believe that taking care of our team members is of the utmost importance. We strive to foster a community of belonging, professional development, and industry involvement; providing our team with the benefits, tools, and support systems to excel in their roles. Out comprehensive benefits package includes: • 100% Employer paid team member premiums for Medical, Dental, Vision, Basic Life Insurance, and Long-Term Disability, • Voluntary Life Insurance, • 401(k) with employer matching; 100% immediate vesting, • Annual & discretionary bonus programs, • Paid vacation and sick time, • Employer paid licensure (FE/PE), certifications, seminars, & conferences, • Paid parental leave, • Tuition reimbursement, • Eight (8) paid holidays including a floating holiday to use at your discretion, • Hybrid work environment with remote flexibility, • Career development, training, and coaching opportunities, • Pet insurance NEI Electric Power Engineering participates in E-Verify and will provide the federal government with your completed Form I-9 to confirm your work authorization in the United States.

Job DescriptionSummary: Gives a high level of customer service by performing the following duties. Essential Duties and Responsibilities include the following: Other duties may be assigned. • Requests customer order and uses POS machine to simultaneously record order and compute bill either at the front counter or at the drive through location., • Selects requested food items from serving or storage areas and assembles items on serving tray or in takeout bag., • Notifies kitchen personnel of shortages or special orders., • Serves hot/cold food, hot/cold beverages, frozen milk drinks, or desserts, • Receives payment., • Cooks or performs other duties to prepare food, serve customers, or maintain orderly and clean eating or serving areas., • Demonstrates a friendly and cooperative manner when dealing with every customer Competency: To perform the job successfully, an individual should demonstrate the following competencies: • Analytical - Uses intuition and experience to complement data., • Design - Demonstrates attention to detail., • Problem Solving - Identifies and resolves problems in a timely manner., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Responds to requests for service and assistance., • Interpersonal - Focuses on solving conflict, not blaming; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions., • Teamwork - Balances team and individual responsibilities; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed., • Written Communication - Able to read and interpret written information., • Quality Management - Demonstrates accuracy and thoroughness., • Ethics - Treats people with respect; Works with integrity and ethics., • Organizational Support - Follows policies and procedures., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Keeps commitments., • Initiative - Asks for and offers help when needed., • Judgment - Exhibits sound and accurate judgment., • Planning/Organizing - Uses time efficiently., • Professionalism - Reacts well under pressure; Accepts responsibility for own actions., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Monitors own work to ensure quality., • Quantity - Completes work in a timely manner., • Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Less than high school education; or up to one-month related experience or training; or equivalent combination of education and experience. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Computer Skills: To perform this job successfully, an individual should have knowledge of Order processing systems. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equipment Fryers, broilers, flat top grills, walk in freezer, menu boards, computers, cash registers, warmer lights, filtering machines, oven, steam units, holding cabinets, slicers, storage units, soda fountain hook up station, microwave ovens, insulated oven mitts, toasters, cooking utensils, and drive thru communication systems. Environmental Conditions:  • The employee is subject to inside environmental conditions, protection from weather conditions, but not necessarily from temperature changes., • The employee is subject to both environmental conditions; work activities occur both inside and outside., • The employee is subject to extreme cold temperatures below 32 degrees for periods of time., • The employee is exposed to hazards which includes a variety of physical conditions, such as moving mechanical parts, electrical current, exposure to high heat of chemicals., • The employee is subject to one or more of the following conditions: fumes, odors, dust, mist, gases or poor ventilation. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to handle or feel; reach with hands and arms and be able to communicate. The employee is frequently required to walk; stoop, kneel, crouch, push and pull. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.

Job DescriptionDescription: About the role The Service Technician diagnoses and completes repairs on customer vehicles in a professional, timely manner while ensuring quality repairs at a fair cost to the customer. ***Pay Range: $20.00 - $25.00 based on experience. Essential Duties • Daily planning with the rest of the service team to establish repair strategies based on job priorities., • Determine work required from the repair order., • Diagnose vehicle in operation to determine issue, to verify customer’s complaint, and to plan repair strategy., • Complete repairs efficiently within the time allowed., • Perform QUALITY repairs minimizing shop comebacks and unnecessary shop expense., • Submit a complete and accurate write-up for each repair performed., • Road test vehicles to verify satisfactory repair (if you possess a CDL), • Manual and computerized time posting on a ongoing basis., • Confirm that all cores are returned to parts and that warranty parts are properly tagged and stored., • Coordinate with the rear parts counter, as needed on parts needed for the repair., • Maintain a clean shop environment. Throw out trash from your repair. Return tools to the cage. Roll up and store drop lights and extension cords., • Maintain the readiness and proper working condition of the shop tools. Make adjustments and minor repairs as needed. Notify Service Manager if a needed tool is not quickly repairable., • Assist the Service Team with preparing accurate repair estimates when required., • Update Service Manager on current repairs in process on a regular basis., • Participate in ongoing training in an effort to increase skills., • Maintain current certifications., • Work in a safe manner. Do not put yourself, a customer, a fellow employee, or a vehicle in harm’s way., • Provide and maintain a full set of hand tools and air tools., • Leave the customer’s vehicle in the same or cleaner condition than when you started repair. Use seat covers and floor mats., • Be punctual at the start of your shift and when returning from lunch and breaks., • Do not exceed one hour on diagnosis without approval from the Service Manager., • Bring any additional repairs, immediately to the attention of the Service Team, • Always wear your safety glasses when on the shop floor., • Understand and follow federal, state, and local regulations regarding disposal of hazardous waste, OSHA, MSDA, right-to-know, etc,, • Conduct oneself in a professional manner reflecting the importance that the customer has in our business. Without the customer, we are out of business., • Think company "first" & customer "first" & safety "first" in all day to day activities Qualifications • Paccar and / or Cummins certification, • Diagnostic / Repair experience with electrical / after-treatments systems, • Brakes, Oil Changes, Clutch Jobs & other general truck repairs, • 5 years working on heavy duty diesel trucks / equipment, • Clean DMV record and current driver’s license. Working Conditions • While performing the duties of this job, the employee is frequently exposed to moving mechanical parts andoutside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places, and fumes or airborne particles., • The noise level in the work environment is usually moderate. Cognitive and Physical Demands • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs., • Ability to apply common sense understanding to carry out instructions furnished in written oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • Frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • Frequently lift and/or move items that weigh on average 10 lbs. or less. At times employees may handle parts up to 50 pounds and occasionally team lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. EEO Statement Coast Counties Peterbilt is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Coast Counties Peterbilt are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, veteran or disability status, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Coast Counties Peterbilt will not tolerate discrimination or harassment based on any of these characteristics. Coast Counties Peterbilt encourages applicants of all ages. Requirements:

Job DescriptionSummary: Gives a high level of customer service by performing the following duties. Essential Duties and Responsibilities include the following: Other duties may be assigned. • Requests customer order and uses POS machine to simultaneously record order and compute bill either at the front counter or at the drive through location., • Selects requested food items from serving or storage areas and assembles items on serving tray or in takeout bag., • Notifies kitchen personnel of shortages or special orders., • Serves hot/cold food, hot/cold beverages, frozen milk drinks, or desserts, • Receives payment., • Cooks or performs other duties to prepare food, serve customers, or maintain orderly and clean eating or serving areas., • Demonstrates a friendly and cooperative manner when dealing with every customer Competency: To perform the job successfully, an individual should demonstrate the following competencies: • Analytical - Uses intuition and experience to complement data., • Design - Demonstrates attention to detail., • Problem Solving - Identifies and resolves problems in a timely manner., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Responds to requests for service and assistance., • Interpersonal - Focuses on solving conflict, not blaming; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions., • Teamwork - Balances team and individual responsibilities; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed., • Written Communication - Able to read and interpret written information., • Quality Management - Demonstrates accuracy and thoroughness., • Ethics - Treats people with respect; Works with integrity and ethics., • Organizational Support - Follows policies and procedures., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Keeps commitments., • Initiative - Asks for and offers help when needed., • Judgment - Exhibits sound and accurate judgment., • Planning/Organizing - Uses time efficiently., • Professionalism - Reacts well under pressure; Accepts responsibility for own actions., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Monitors own work to ensure quality., • Quantity - Completes work in a timely manner., • Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Less than high school education; or up to one-month related experience or training; or equivalent combination of education and experience. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Computer Skills: To perform this job successfully, an individual should have knowledge of Order processing systems. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equipment Fryers, broilers, flat top grills, walk in freezer, menu boards, computers, cash registers, warmer lights, filtering machines, oven, steam units, holding cabinets, slicers, storage units, soda fountain hook up station, microwave ovens, insulated oven mitts, toasters, cooking utensils, and drive thru communication systems. Environmental Conditions:  • The employee is subject to inside environmental conditions, protection from weather conditions, but not necessarily from temperature changes., • The employee is subject to both environmental conditions; work activities occur both inside and outside., • The employee is subject to extreme cold temperatures below 32 degrees for periods of time., • The employee is exposed to hazards which includes a variety of physical conditions, such as moving mechanical parts, electrical current, exposure to high heat of chemicals., • The employee is subject to one or more of the following conditions: fumes, odors, dust, mist, gases or poor ventilation. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to handle or feel; reach with hands and arms and be able to communicate. The employee is frequently required to walk; stoop, kneel, crouch, push and pull. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.

Job Description To profitably operate the restaurant within the practice and procedures established by Burger King Corporation and the company. This position is responsible for cost control, customer service, restaurant and employee appearance, building sales, maximizing profits and employee development. ESSENTIAL DUTIES AND RESPONSIBILITIES include, but not limited to the following: • Responsible for working the front counter to ensure quality service. Checks product quality and communicates with customers and assures availability. Effectively trains and coaches employees to show courtesy and handling of complaints., • Conduct meetings with team members and management team for the purpose of planning, training, and reviewing operations/management procedures and policies., • Develops and maintains an acceptable level of sales. Utilizes local store marketing., • Monitors utilities, supplies, and other cost categories to minimize impact. Analyzes Profits and Loss statements and takes appropriate corrective action. Follows proper procedures and specifications in preparation and serving of food products. Controls restaurant inventory through an established inventory system., • Use company approved labor guidelines. Develops and post labor schedules in advance of work week start. Adjusts labor to changes in sale volume., • Manages restaurant cash control by making bank deposits daily. Follows the Cash Handling Procedures outlined in the company’s employee handbook., • Ensures accidents and incidents are reported to Risk Management in a timely manner. Take necessary action to minimize workers and/or unemployment compensation. Maintains safe work environment. Achieve highest possible rating by the Health Department. Ensures professional restaurant and team image through rigid adherence to restaurant cleanliness, uniforms, and overall is following BKC’s Image standards., • Keeps District Manager informed of hiring team members, approval for promotions and changes in employee status. Process payroll accordingly. Maintains applicant tracking as per federal requirements., • Conducts performance reviews with management team and team members. Documents in writing, corrective disciplinary action with employees or any incident involving customers. Maintain team member’s personnel files in accordance with federal, state and local law. Posts all Federal and State required posters., • Utilizes a preventive maintenance system, ensuring adequate repair of buildings and equipment as needed., • Attends meetings as scheduled by District Manager for the purpose of planning, training and reviewing operations/management procedures and policies., • Performs all administrative paperwork as required. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. RESOLVE It is critical that the candidate possesses a strong desire to make a positive image in people’s lives to pursue excellence and have a passion for the QSR industry. EDUCATION and/or EXPERIENCE High School or GED; some college preferred; Previous restaurant experience desirable. Must be at least 18 years of age. Must be Serv Safe certified. COMMUNICATION SKILLS Ability to demonstrate excellent written and oral communication skills; Ability to listen to understand other points of view before responding; Ability to influence others to gain commitment; Ability to present information in a clear and concise manner. MATHEMATICAL SKILLS Understanding of P & L analysis, Cash Controls, Labor Analysis, Yields and calculating food costs (theoretical vs. actual). REASONING ABILITY To be able to solve problems and deal with a variety of complex issues that is common in the QSR business. Must be able to exercise sound judgment in considering course of action. FLEXIBILITY Handles day-to day work challenges confidently; is willing and able to adjust to multiple demands, shifting priorities, and rapid change; ability to work a variety of shifts and times of day. This position requires OPEN availability. LEADERSHIP Develops and grows others; solicits and applies customer feedback; improve processes, product and services; Gains support and commitment from others; mobilizes people to act; Uses delegated authority to meet specific responsibilities. COMPUTER SKILLS To perform this job successfully, an individual should have knowledge of Order processing systems and basic computer skills. COMPENSATION Based on appropriate pay band + commensurate with experience + incentive bonus plan based on performance and profitability of the company operations. BACKGROUND CHECK Candidates are required to pass background check and drug test criteria as a condition of promotion or hire to this position unless otherwise prohibited by state law. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUIPMENT Fryers, broilers, flat top grills, walk in freezer, menu boards, computers, cash registers, warmer lights, filtering machines, oven, steam units, holding cabinets, slicers, storage units, soda fountain hook up station, microwave ovens, insulated oven mitts, toasters, cooking utensils, and drive thru communication systems. ENVIRONMENTAL CONDITIONS • The employee is subject to inside environmental conditions, protection from weather conditions, but not necessarily from temperature changes., • The employee is subject to both environmental conditions; work activities occur both inside and outside., • The employee is subject to extreme cold temperatures below 32 degrees for periods of time., • The employee is exposed to hazards which includes a variety of physical conditions, such as moving mechanical parts, electrical current, exposure to high heat of chemicals., • The employee is subject to one or more of the following conditions: fumes, odors, dust, mist, gases or poor ventilation. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to handle or feel; reach with hands and arms and be able to communicate. The employee is frequently required to walk; stoop, kneel, crouch, and push. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.