Trabajos entry level technical en Dallas, TexasCrear alertas

Job Description Lead Custom Residential Electrician Job Description Work Hours Monday - Friday 6:15am - 5:00pm Saturday and Sunday (if seasonal workload requires or behind on job walks) Position Overview: The Lead Custom Residential Electrician is responsible for oversight on-site electrical installations for luxury high-end custom homes, extensive renovations, and complex residential projects. Beyond executing high-level electrical technical work, this role serves as the field job lead—directing apprentices and helpers, managing daily workflow, enforcing safety and NEC compliance, and serving as the main point of contact for General Contractors and homeowners. Core Responsibilities & Job Duties1. Job Site Leadership & Job Management • Daily Workflow Execution: Review blueprints, electrical schematics, and lighting control specs; map out daily task lists for the crew to keep projects on schedule and within labor budgets., • On-Site Coordination: Serve as the primary field representative with General Contractors, architects, interior designers, and sub-trades to coordinate rough-in and trim-out timing., • Material & Inventory Control: Audit job site inventory weekly, anticipate upcoming material needs, and submit precise material orders to prevent work stoppages., • Quality Assurance: Conduct pre-inspection walk-throughs prior to local building authority inspections (Rough-In, Service, and Final) to guarantee zero-fail outcomes. 2. Custom Electrical & Technical Execution, • Complex Rough-In & Trim: Install high-end architectural fixtures, concealed LED strip channels, landscape lighting systems, generators, and 200A–400A+ residential service panels., • Smart Home & Automation Systems: Wire and program residential automation networks, custom lighting control panels (e.g., Lutron Homeworks, Control4, Crestron), motorized shades, and EV charging infrastructure., • Troubleshooting & Modifications: Diagnose complex circuit issues, plan non-destructive retrofits in completed spaces, and make real-time design adaptations to suit custom field conditions. 3. Apprentice & Helper Leadership, • Task Delegation: Assign clear, skill-appropriate daily assignments to apprentices/helpers while setting measurable productivity targets., • Technical Instruction & Mentorship: Teach correct installation techniques (e.g., precise box placement, clean wire routing, panel makeup, and proper tool safety)., • Quality Verification: Inspect all work performed by apprentices/helpers before enclosure or energization to ensure alignment with company standards and NEC requirements., • Performance Evaluation: Provide regular performance feedback, identify skill gaps, and mentor entry-level staff toward journeyman licensure. Core Responsibilities Breakdown Management & Operations Apprentice Oversight Technical Custom Work Job site labor scheduling Daily hands-on instruction Smart lighting control integration Blueprint & spec interpretation Quality checks on helper rough-ins Service upgrades (200A–600A) Contractor/GC coordination Safety protocol enforcement Architectural & low-voltage wiring Material tracking & ordering Code compliance mentorship Standby generator installations

Job Description POSITION: Electrical Job Runner I DWS ENERGY Founded in 2014, Diversified Wiring Solutions dba, DWS Energy is a rapidly expanding, electrical contracting construction company specializing in installation services for Data Center and Healthcare markets focusing on commercial building controls wiring, and electrical pre-fabrication solutions in our UL-508A certified panel shop. The organization has expanded its service offerings throughout its tenure and continues to grow at an accelerated rate. OVERVIEW: The Job Runner I – Electrical role is responsible for assisting in the management and execution of electrical controls projects, ensuring they are completed efficiently and to the highest standards. This entry-level role is ideal for individuals looking to gain experience in project management within the electrical controls industry. DUTIES: The duties and responsibilities of the Job Runner I may include but are not limited to: • Support Senior Job Runners in planning, coordinating, and supervising electrical controls projects., • Perform precise and secure electrical terminations, ensuring proper connection and functionality of wiring systems according to project specifications and safety standards including multi-mode and single-mode fibers., • Work closely with Installers and Apprentice Electricians to ensure project tasks are completed on time., • Assist in monitoring and inspecting work to ensure compliance with industry standards and regulations., • Assist with point validation and testing., • Maintain time entries for the project., • Maintain material stock for the project., • Creating and maintaining Job Safety documents (JHA) and pre-task planning., • Communicate with clients to provide updates and address any concerns., • Help track project efficiency and assist in managing budgets., • Follow and enforce safety protocols to maintain a safe working environment., • Maintain accurate records of project activities, including reports and schedules. QUALIFICATIONS: The following are required skills and qualifications: • Construction industry experience is preferred., • High school diploma or equivalent; additional technical training or coursework in electrical systems is a plus., • Be able to utilize Senior level Supervision., • Some experience in electrical work or project management is preferred but not required., • Strong organizational, communication, and problem-solving skills. Basic proficiency in project management software and tools., • Basic understanding of electrical systems, codes, and regulations., • Relevant certifications (e.g., Master Electrician, Journeyman’s License) are a plus., • Valid Driver’s License, • CPR AED/First AID certified., • OSHA 30 required. (Must be completed within 6 months) REQUIREMENTS: The following are physical requirements: • Must be able to lift and carry equipment and materials., • Must be able to do prolonged periods of standing, stooping, kneeling, bending, • Must be able to work safely on a ladder., • Occasional exposure to outside weather on job sites., • Ability to walk job sites for prolonged periods of time., • Must be able to occasionally lift at least 35 lbs. solo and 50 lbs. in tandem lifts. Character Traits: Teamwork, self-motivation, accountability, honesty/integrity, persistence, hard-working, committed, trustworthy, knowledgeable are just some of the character values we foster. Benefits: The following are our benefits package offered for this role: • Competitive base salary up to $, • Strong benefits package., • Opportunities for career growth and development Application Process: To apply for the position of Electrical Job Runner I please submit your resume and a cover letter detailing your relevant experience and qualifications. We thank all applicants for their interest; however, only those selected for an interview will be contacted. DWS Energy is an equal opportunity employer and is committed to diversity, equity, and inclusion in the workplace. We encourage individuals from all backgrounds to apply.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact The Entry Level Travel Battery Energy Storage System (BESS) Technician in the PEARCE Renewables Energy Storage Systems (ESS) division performs tasks involving operations and maintenance (O&M) and physical labor at commercial and industrial solar energy projects located throughout United States. This is up to a 100% travel role across the United States. Core Responsibilities • Troubleshoot and perform preventive maintenance on Battery Energy Storage System (BESS) equipment., • Perform Lock Out Tag Out (LOTO) of equipment as an authorized person and under properly performed LOTO conditions., • Conduct daily safety and task planning discussions including pre-task planning, Job Hazard Assessments (JHAs), and Risk Assessments (RAs)., • Interact with vendors and customers in a professional manner., • Act as a team member to support site work which could include supervising field work onsite focusing on safety, quality, and efficiency. Specific duties may vary or evolve over time based on business and client needs. Core Experience • 1+ years of electrical proficiency relating to electrical systems and components is preferred., • 1+ years of Renewable energy experience is preferred., • A commitment to safety and attention to detail with the ability to recognize potential issues and provide safe solutions., • Post-secondary education or Technical school is preferred., • Electrical certifications are preferred such as OSHA 10, OSHA 30, and NFPA70E., • Excellent written and verbal skills to meet Environmental Health and Safety (EHS) internal and external requirements is required. Physical/Work Environment: At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This is a travel position-travel will be required for up to SIX weeks at a time. A per diem will be provided when traveling., • Candidates must have a valid driver's license for at least a year., • Work possible rotating shifts (100% travel is required for this position)., • Prolong standing and working in ergonomic challenging positions., • Varied climates based upon locations. Compensation: $22.00-$25.00 hourly/DOE and Per Diem At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $22—$25 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

\n Location- Irving, TX \n FT Night About Us\n Here at Baylor Scott & White Health we promote the well-being of all individuals, families, and communities. Baylor Scott and White is the largest not-for-profit healthcare system in Texas that empowers you to live well. \n Our Core Values are: \n\n • We serve faithfully by doing what's right with a joyful heart.\n, • We never settle by constantly striving for better.\n, • We are in it together by supporting one another and those we serve.\n, • We make an impact by taking initiative and delivering exceptional experience.\nBenefits\n Our benefits are designed to help you live well no matter where you are on your journey. For full details on coverage and eligibility, visit the Baylor Scott & White Benefits Hub to explore our offerings, which may include: \n\n • Immediate eligibility for health and welfare benefits\n, • 401(k) savings plan with dollar-for-dollar match up to 5%\n, • Tuition Reimbursement\n, • PTO accrual beginning Day 1\n\n Note: Benefits may vary based upon position type and/or level. Job Summary\n The Registered Respiratory Therapist will work with a team in a culture of learning and advancement, using scientific values, therapies, and techniques to improve patient care and outcomes. Essential Functions of the Role\n\n • Performs and directs respiratory care services like oxygen and aerosol therapy. Works with the attending physician and care team. Administers care with quality and excellence, following procedures. Administers cardiopulmonary resuscitation in emergencies.\n, • Adheres to established policies, including infection control, isolation, HIPAA, time and attendance, and social media.\n, • Performs willingly and professionally with peers and patients to maintain the very best work environment and outcomes.\n, • Embraces the autonomy to grow and enhance skills such that professional and technical requirements are accomplished.\n, • Focuses on continuous quality improvement in all aspects of clinical care. Identifies, executes, and shares opportunities to improve patient care.\nKey Success Factors\n\n, • General knowledge of Respiratory Care modalities, therapies, equipment, and medications.\n, • Able to read, write and follow flow chart protocols as appropriate.\n, • Critical thinking and problem-solving skills.\n, • General computer skills, including but not limited to: data entry, information security, electronic medical documentation, hand-held scanning, and email.\nBelonging Statement\n We believe that all people should feel welcomed, valued and supported. \n QUALIFICATIONS \n\n • EDUCATION - Associate's or 2 years of work experience above the minimum qualification\n, • EXPERIENCE - Less than 1 Year of Experience\n\n CERTIFICATION/LICENSE/REGISTRATION - \n\n • Basic Life Support (BLS): BLS in 30 days of hire or transfer.\n, • Respiratory Care Practitioner (RCP): Licensed by the State of Texas Medical Board as a Respiratory Care Practitioner (RCP).\n, • Reg Respiratory Therapist (RRT): Registered Respiratory Therapist (RRT) from the National Board Respiratory Care.\n

\n Location- Rowlett, TX\n PRN Day Seasonal About Us\n Here at Baylor Scott & White Health we promote the well-being of all individuals, families, and communities. Baylor Scott and White is the largest not-for-profit healthcare system in Texas that empowers you to live well. \n Our Core Values are: \n\n • We serve faithfully by doing what's right with a joyful heart.\n, • We never settle by constantly striving for better.\n, • We are in it together by supporting one another and those we serve.\n, • We make an impact by taking initiative and delivering exceptional experience.\nBenefits\n Our benefits are designed to help you live well no matter where you are on your journey. For full details on coverage and eligibility, visit the Baylor Scott & White Benefits Hub to explore our offerings, which may include: \n\n • Immediate eligibility for health and welfare benefits\n, • 401(k) savings plan with dollar-for-dollar match up to 5%\n, • Tuition Reimbursement\n, • PTO accrual beginning Day 1\n\n Note: Benefits may vary based upon position type and/or level. Job Summary\n The Registered Respiratory Therapist (RRT) Seasonal PRN has advanced knowledge of the cardiopulmonary system to manage and treat patients. Therapists use various scientific methods, therapies, and techniques to optimize patient care and outcomes. Essential Functions of the Role\n\n • Performs and directs respiratory care services like oxygen therapy and aerosol therapy. This includes inhaled medication, airway clearance, and ventilation. Follows the attending physician's orders and established procedures. Administers cardiopulmonary resuscitation in emergencies.\n, • Reviews physician's orders, examines patient's test results, and provides therapy based on the patient's condition. If appropriate, implements approved protocols as directed by the physician.\n, • Performs routine and advanced respiratory therapy prioritizing patient needs in a rapidly changing environment.\n, • Instructs patient in using various respiratory care equipment thoroughly and professionally. Assesses patient response to therapy and coaches to improve technique.\n, • Document all treatments, therapies, and supplies used. Accurately file all corresponding charges. Report outcomes of therapeutic interventions and make recommendations as appropriate.\n, • Adheres to established policies, including infection control, isolation, HIPAA, time and attendance, and social media.\n, • Works willingly and professionally with other employees, healthcare professionals and students.\n, • Takes responsibility and initiative to know and complete any professional or technical requirements set by leadership.\n, • Incorporates values continuous quality improvement in all aspects of clinical care, identifying opportunities as appropriate.\nKey Success Factors\n\n, • General knowledge of Respiratory Care modalities, therapies, equipment and medications.\n, • Must be able to read, write and follow flow chart protocols as appropriate.\n, • Must be able to work under stressful conditions.\n, • Must have critical thinking and problem-solving skills.\n, • General computer skills, including but not limited to data entry, information security, electronic medical documentation, handheld scanning and email.\nBelonging Statement\n We believe that all people should feel welcomed, valued and supported. \n QUALIFICATIONS \n\n • EDUCATION - Associate's or 2 years of work experience above the minimum qualification\n, • EXPERIENCE - Less than 1 Year of Experience\n, • CERTIFICATION/LICENSE/REGISTRATION -\n\n Basic Life Support (BLS) \n Respiratory Care Practitioner (RCP): Licensed by the State of Texas Medical Board as a Respiratory Care Practitioner (RCP). \n Reg Respiratory Therapist (RRT): Registered Respiratory Therapist (RRT) from the National Board Respiratory Care.

Job DescriptionCompany Overview Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. Through our Data Center Mission Critical (DC|MC) business unit, Upchurch provides specialized operations and maintenance services focused on uptime, reliability, and lifecycle performance of data center infrastructure. This role supports colocation, hyperscale, enterprise, and edge data centers by executing disciplined preventive, corrective, and condition-based maintenance on mission-critical cooling and mechanical systems. Position Summary The Mechanical HVAC Mission Critical Service Technician is responsible for maintaining, troubleshooting, and servicing mechanical and HVAC systems that directly support data center uptime and reliability. Unlike traditional comfort-cooling roles, this position operates in high-availability environments where procedural compliance, redundancy awareness, and precision execution are mandatory. Technicians perform scheduled preventive maintenance (PM), corrective maintenance (CM), and emergency response activities on mission-critical cooling based on SLAs of 2-8 hours and mechanical systems while adhering to strict Method of Procedure (MOP), safety, and change-management standards. Key Responsibilities Perform preventive and corrective maintenance on data center mechanical systems, including but not limited to: CRAH / CRAC units Chilled water systems Pumps, valves, strainers, and heat exchangers Cooling towers, adiabatic systems, and fluid loops DX, split, and supplemental cooling systems Execute work through our field management system using approved MOPs, SOPs, and change-management processes. Maintain system redundancy and awareness of upstream/downstream impacts. Respond to alarms, degraded performance, and emergency service calls per SLA. Document all work, readings, inspections, and system conditions accurately. Follow strict safety protocols (LOTO, PPE, site rules, confined space, etc.). Participate in on-call rotations and scheduled maintenance windows. Complete required overall company and data center specific training via Upchurch University LMS DC|MC program. Level Differentiation & Expectations Level I – Foundational Mission Critical Technician Primary Focus: Execution, safety, learning Performs PM and basic CM tasks under supervision. Supports inspections, filter changes, belt replacements, lubrication, and visual checks. Learns data center environments, redundancy concepts, and uptime risk. Accurately records readings and follows procedures step-by-step. Escalates abnormal conditions promptly. Developing familiarity with: CRAH/CRAC fundamentals Chilled water basics Data center etiquette and live-site work Typical Experience 0–2 years HVAC/mechanical experience Entry into data center or critical environments Level II – Intermediate Mission Critical Technician Primary Focus: Independent execution, troubleshooting Independently performs PM and CM on assigned systems. Troubleshoots alarms, performance degradation, and control issues. Executes approved MOPs with limited oversight. Coordinates with controls, electrical, and operations teams. Identifies early failure indicators and recommends corrective actions. Begins system-level ownership of specific assets (e.g. CRAH, pumps). Supports outage planning and maintenance window execution. Typical Experience 2–5 years HVAC/mechanical experience Prior data center, industrial, or critical facility exposure preferred Level III – Senior Mission Critical Technician Primary Focus: System ownership, leadership, reliability Serves as technical authority for assigned mechanical systems. Leads execution of complex MOPs, outages, and recovery procedures. Performs advanced diagnostics and root-cause analysis. Reviews and improves SOPs, PM scopes, and maintenance strategies. Mentors Level I and II technicians. Interfaces directly with client operations and service management. Supports condition-based and predictive maintenance programs. Identifies risk, reliability gaps, and lifecycle improvement opportunities. Typical Experience 5+ years HVAC/mechanical experience Strong mission-critical or data center background Qualifications High school diploma or equivalent; technical/vocational training preferred EPA Section 608 Certification (Universal or applicable type) Ability to read: P&IDs Mechanical schedules OEM documentation MOPs and SOPs Valid driver’s license Ability to work in live critical environments Preferred / Differentiators CRAH / CRAC experience Chilled water plant exposure BAS/BMS familiarity OEM certifications OSHA 10 / 30 Experience in data centers, hospitals, or industrial facilities Physical & Work Environment Lift up to 50 lbs Work in raised-floor environments, rooftops, and equipment rooms Exposure to noise, airflow, and operational equipment Ability to work nights, weekends, and on-call rotations Career Progression Upchurch intentionally designed this role as a progressive technician pathway, supported by: Upchurch University mission-critical curriculum OEM training and certification Defined advancement from Level I → II → III Expansion into: Lead Technician SME (Cooling, Pumps, Liquid Cooling) Service Manager Integrated Systems Operations roles Benefits: Competitive pay based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Hours of Work : TBA Days Of Week : TBA Work Shift : Job Description : Your Job: In this highly technical allied imaging professional position, you'll collaborate with a multidisciplinary team to provide the very best imaging services, which include ultrasound, CT scan, PET scan, interventional radiology, digital mammography, and nuclear medicine. The primary purpose of the Registered Diagnostic Medical Sonographer with RVT position is to provide diagnostic patient care services using ultrasound and related diagnostic techniques to perform routine, vascular, interventional, and non-invasive procedures. Your Job Requirements: • Graduate of an approved Diagnostic Ultrasound Program, • In addition to required entry level registries, the sonographer must demonstrate clinical competency in performance of abdomen, obstetric, and gynecologic, or vascular procedures, • Current Basic Life Support certification, • RDMS - Abdomen or OB/GYN or ARRT (S), • RVT (ARDMS), VS (ARRT), or RVS/RCVT (CCI), • 1 year experience required Your Job Responsibilities: • Communicate clearly and openly, • Build relationships to promote a collaborative environment, • Be accountable for your performance, • Always look for ways to improve the patient experience, • Take initiative for your professional growth, • Be engaged and eager to build a winning team

Hours of Work : PRN Days Of Week : PRN Work Shift : Job Description : Your Job: In this highly technical allied imaging professional position, you'll collaborate with a multidisciplinary team to provide the very best imaging services, which include ultrasound, CT scan, PET scan, interventional radiology, digital mammography, and nuclear medicine. The primary purpose of the Registered Diagnostic Medical Sonographer with RVT position is to provide diagnostic patient care services using ultrasound and related diagnostic techniques to perform routine, vascular, interventional, and non-invasive procedures. Your Job Requirements: • Graduate of an approved Diagnostic Ultrasound Program, • In addition to required entry level registries, the sonographer must demonstrate clinical competency in performance of abdomen, obstetric, and gynecologic, or vascular procedures, • Current Basic Life Support certification, • RDMS - Abdomen or OB/GYN or ARRT (S), • RVT (ARDMS), VS (ARRT), or RVS/RCVT (CCI), • 1 year experience required Your Job Responsibilities: • Communicate clearly and openly, • Build relationships to promote a collaborative environment, • Be accountable for your performance, • Always look for ways to improve the patient experience, • Take initiative for your professional growth, • Be engaged and eager to build a winning team Methodist Dallas Medical Center is one of North Texas’ best places to work. And it keeps getting better. The flagship hospital of Methodist Health System, Methodist Dallas is a 595-bed acute care teaching and referral hospital. It is home to the only adult Level I Trauma Center in southern Dallas, the first and only Certified Comprehensive Stroke Center in southern Dallas, and the newly renovated Linda and Mitch Hart Breast Center. Celebrating more than 90 years of service, we strive to have a diverse workforce that reflects the communities we serve and welcomes the skills and talents of all groups. Our reputation as an award-winning employer shows in the distinctions we’ve earned: • Magnet®-designated hospital, • 150 Top Places to Work in Healthcare by Becker’s Hospital Review, 2023, • Top 10 Military Friendly® Employer, Gold Designation, 2023, • Top 10 Military Spouse Friendly® Employer, 2023, • Level III Neonatal Intensive Care Unit, • Liver, kidney, and pancreas transplantation programs

Hours of Work : PRN Days Of Week : PRN Work Shift : Job Description : Your Job: In this highly technical allied imaging professional position, you'll collaborate with a multidisciplinary team to provide the very best imaging services, which include ultrasound, CT scan, PET scan, interventional radiology, digital mammography, and nuclear medicine. The primary purpose of the Registered Diagnostic Medical Sonographer with RVT position is to provide diagnostic patient care services using ultrasound and related diagnostic techniques to perform routine, vascular, interventional, and non-invasive procedures. Your Job Requirements: • Graduate of an approved Diagnostic Ultrasound Program, • In addition to required entry level registries, the sonographer must demonstrate clinical competency in performance of abdomen, obstetric, and gynecologic, or vascular procedures, • Current Basic Life Support certification, • RDMS - Abdomen or OB/GYN, • RVT (ARDMS), VS (ARRT), or RVS/RCVT (CCI), • 1 year experience required Your Job Responsibilities: • Communicate clearly and openly, • Build relationships to promote a collaborative environment, • Be accountable for your performance, • Always look for ways to improve the patient experience, • Take initiative for your professional growth, • Be engaged and eager to build a winning team Methodist Dallas Medical Center is one of North Texas’ best places to work. And it keeps getting better. The flagship hospital of Methodist Health System, Methodist Dallas is a 595-bed acute care teaching and referral hospital. It is home to the only adult Level I Trauma Center in southern Dallas, the first and only Certified Comprehensive Stroke Center in southern Dallas, and the newly renovated Linda and Mitch Hart Breast Center. Celebrating more than 90 years of service, we strive to have a diverse workforce that reflects the communities we serve and welcomes the skills and talents of all groups. Our reputation as an award-winning employer shows in the distinctions we’ve earned: • Magnet®-designated hospital, • 150 Top Places to Work in Healthcare by Becker’s Hospital Review, 2023, • Top 10 Military Friendly® Employer, Gold Designation, 2023, • Top 10 Military Spouse Friendly® Employer, 2023, • Level III Neonatal Intensive Care Unit, • Liver, kidney, and pancreas transplantation programs

Hours of Work : Days Of Week : Work Shift : 8X5 Day (United States of America) Job Description : Your Job: In this highly technical, fast-paced, and rewarding position, you'll collaborate with multidisciplinary team members to provide the very best care for patients. The primary purpose of the Registered Diagnostic Medical Sonographer position is to provide diagnostic patient care services using ultrasound and related diagnostic techniques to perform routine, vascular, interventional, and non-invasive procedures. Your Job Requirements: • Graduate of an approved Diagnostic Ultrasound Program, • In addition to required entry level registries, the sonographer must demonstrate clinical competency in performance of abdomen, obstetric and gynecologic, or vascular procedures, • Current Basic Life Support Certification, • RDMS — Abdomen or OB/GYN or ARRT (S), must have certification within 1 year from hire date. Your Job Responsibilities: • Communicate clearly and openly, • Build relationships to promote a collaborative environment, • Be accountable for your performance, • Always look for ways to improve the patient experience, • Take initiative for your professional growth, • Be engaged and eager to build a winning team Methodist Dallas Medical Center is one of North Texas’ best places to work. And it keeps getting better. The flagship hospital of Methodist Health System, Methodist Dallas is a 595-bed acute care teaching and referral hospital. It is home to the only adult Level I Trauma Center in southern Dallas, the first and only Certified Comprehensive Stroke Center in southern Dallas, and the newly renovated Linda and Mitch Hart Breast Center. Celebrating more than 90 years of service, we strive to have a diverse workforce that reflects the communities we serve and welcomes the skills and talents of all groups. Our reputation as an award-winning employer shows in the distinctions we’ve earned: • Magnet®-designated hospital, • 150 Top Places to Work in Healthcare by Becker’s Hospital Review, 2023, • Top 10 Military Friendly® Employer, Gold Designation, 2023, • Top 10 Military Spouse Friendly® Employer, 2023, • Level III Neonatal Intensive Care Unit, • Liver, kidney, and pancreas transplantation programs

Hours of Work : 8am-4:30pm Days Of Week : Monday-Friday Work Shift : PRN (United States of America) Job Description : Your Job: In this highly technical allied imaging professional position, you'll collaborate with a multidisciplinary team to provide the very best imaging services, which include ultrasound, CT scan, PET scan, interventional radiology, digital mammography, and nuclear medicine. The primary purpose of the Registered Diagnostic Medical Sonographer with RVT position is to provide diagnostic patient care services using ultrasound and related diagnostic techniques to perform routine, vascular, interventional, and non-invasive procedures. Your Job Requirements: • Graduate of an approved Diagnostic Ultrasound Program • In addition to required entry level registries, the sonographer must demonstrate clinical competency in performance of abdomen, obstetric, and gynecologic, or vascular procedures • Current Basic Life Support certification • RDMS — Abdomen or OB/GYN, must have certification within 1 year from hire date • Work Experience: 1 year experience preferred Your Job Responsibilities: • Communicate clearly and openly • Build relationships to promote a collaborative environment • Be accountable for your performance • Always look for ways to improve the patient experience • Take initiative for your professional growth • Be engaged and eager to build a winning team Methodist Southwest Medical Center, previously known as Methodist Charlton Medical Center, is a 314-bed, full-service, acute care teaching hospital that serves Cedar Hill, DeSoto, Duncanville, Lancaster, and Glen Heights in southwestern Dallas County. In addition to the new 40,000-square-foot expansion of the emergency department, we offer a newly renovated intensive care unit, labor and delivery unit, and interventional radiology suite; a Level III Trauma Center, a Level II Neonatal Intensive Care Unit, and the Dr. Stephen and Marilyn Mansfield Oncology Unit. We have been recognized for excellence in cardiac catheterization, electrophysiology, open heart surgery, and STEMI care, stroke care, hip and knee joint replacement, women and children’s services, and more. We strive to have a diverse workforce that reflects the communities we serve and welcomes the skills and talents of all groups. Our reputation as an award-winning employer shows in the distinctions we’ve earned: • Magnet®-designated hospital, • Get With The Guidelines® Gold and Gold Plus awards from the American Heart Association, • Great Place to Work Certified 2026-2027, • Glassdoor’s Best Places to Work; Best Places to Work in Healthcare, Biotech & Pharma; and Best-Led Companies 2025 & 2026, • TIME’s Best Companies for Future Leaders 2025 & 2026, • Newsweek’s America’s Most Admired Workplaces 2026, • Fortune Best Workplaces in Texas 2026, • Military Friendly Gold Employer 2025

Description\n \n Summary: \n The Manager Accounting is responsible for supervising the activities of their assigned functional accounting team. Each accounting team is responsible for timely completion of month-end close activities, including preparing all journal entries in accordance with US Generally Accepted Accounting Principles (US GAAP), proper review of journal entries to ensure the operating effectiveness of internal controls, and financial statement analysis relevant to their assigned functional and/or regional responsibilities. \n Functional Accounting Teams are as follows: \n Cash Accounting \n Fixed Assets Accounting \n Corporate Accounting \n Payroll Accounting \n Investments and Foundation Accounting \n Prepaid Asset, Deferred Revenue, and Notes Payable Accounting \n Inventory and Supplies Accounting \n Physician Guarantees and Physician Fees Accounting \n Purchased Services and Non-Patient Accounts Receivable Accounting \n Contract Labor and Utilities Accounting \n Joint Venture Accounting \n Intercompany Accounting, Allocations, and Eliminations \n Lease Accounting \n Technical Accounting \n Health Plan Accounting \n Physician Group Accounting \n Grant Accounting \n The Manager Accounting is responsible for supervision and training of accountants on the assigned functional team. Functional teams typically consist of 5-8 accountants. The Manager Accounting is expected to function at a high level of accounting knowledge coupled with ability to direct others and give feedback on a daily basis as to work product. The Manager Accounting is responsible for assigning and reviewing the work of the functional team as well as ensuring appropriate goals and deadlines are met. The Manager Accounting is responsible for overall performance evaluation of their direct reports and is expected to provide specific and documented feedback on the work of the associates. \n This position requires a strong understanding of United States Generally Accepted Accounting Principles (US GAAP). The Manager Accounting should be able to demonstrate an understanding of the purpose of the journal entries their team is recording to the general ledger, evaluate the appropriateness of the entry (including the GL accounts used and the financial statement line item classification), and explain the impact to the financial statements. The Manager Accounting is responsible for performing review of the journal entries recorded by their team and may be assigned to prepare areas of higher risk and more complex accounting within the functional accounting team. They are responsible for ensuring appropriate and relevant supporting documentation is attached to the journal entries recorded by their team. The Manager Accounting is responsible for evaluating the source of the information for journal entries and asking appropriate followup questions to ensure documentation is appropriate. In some cases, appropriate support will include developing estimates of the current month activity based on financial analysis of historical data. The Manager Accounting is expected to develop an understanding of healthcare specific accounting issues relevant to the assigned functional accounting area. Previous healthcare experience is preferred but not required. The Manager Accounting is responsible for analyzing and providing variance explanations (from budget and trend) related to assigned areas. The Manager Accounting is responsible for review of monthly balance sheet account reconciliations related to the assigned functional accounting area. Reconciliations related to higher risk areas may be assigned directly to the Manager Accounting for preparation. \n The Manager Accounting is responsible for ensuring the team is meeting month-end close deadlines and communicating timely when any deviation from the close schedule is expected. The Manager Accounting should proactively look for ways to make our processes more efficient and maintain or reduce the overall close timeline. Timeliness, accuracy, and the ability to prioritize and meet critical deadlines are essential. The Manager Accounting is expected to lead efforts in improving processes for preparation of financial statements and related reports/schedules, ensuring reporting accuracy and building relationships throughout the System that achieve these goals. \n For each month-end close, the Manager Accounting is responsible for accumulating and summarizing variance analysis results for both the functional area and the Manager’s assigned regional responsibilities (if any). For Managers with regional responsibilities, the Manager Accounting will be responsible for preparing materials for and leading month-end financial review calls with the regional CFOs. The position requires strong analytical skills and the ability to problem solve. Manager Accounting will be required to review financial and non-financial information in various modules with in Infor CloudSuite relevant to their functional area, including but not limited to the following modules: GL, BI/FSM, Inventory, Purchasing, Fixed Assets, Cash, etc. as part of the research and review of financial statement variances. \n The Manager Accounting is responsible for assisting other teams across the System (both at the corporate office and at our facilities) with information requests related to the assigned functional area, as needed. The Manager Accounting is expected to work closely with other teams to resolve issues timely and to the satisfaction of all parties. The Manager Accounting is responsible for other projects, as assigned, which may include but are not limited to: research of GL transactions to understand the impact to the GL, process improvement projects, and assistance for the year-end external audit. The position requires excellent written and verbal communication skills. \n Responsibilities: \n\n • Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.\n, • Supervise and review the work of the functional accounting team. This includes assigning tasks, coordinate team projects, reviewing work prepared by the team, coaching and training team members, ensuring all responsibilities of the assigned team are met timely and effectively.\n, • Independent analysis of applicable accounting guidance (FASB, AICPA, etc.) to guarantee the proper treatment of financial transactions and ensuring compliance with U.S. Generally Accepted Accounting Principles (US GAAP).\n, • Perform variance analysis on assigned accounts to both budget and trend.\n, • Review month-end journal entries and account reconciliations prepared by accountants, as assigned. Provide feedback to accountants as necessary and ensure entries are appropriate and include appropriate documentation.\n, • Lead onboarding and training of accountants\n, • Accumulate and analyze month-end variance analysis for assigned functional area and assigned regional responsibilities.\n, • Identify errors and research areas of concern. Communicate issues to Accounting Leadership and provide potential solutions. Direct the implementation of any corrections or changes needed to resolve.\n, • Drive process improvements to ensure the team becomes more efficient.\n, • Develop and maintain excellent working relationships with other teams across the System (both at the corporate office and at our facilities).\n, • Support Senior Management, Regional and Corporate Associates with data requests and analyses. \n\n Requirements: \n Education/Skills \n\n • Bachelor's Degree, Accounting degree is preferred.\n\n Experience \n\n • Minimum 8 years of accounting experience required.\n, • General ledger accounting experience and/or Healthcare accounting experience preferred.\n\n Licenses, Registrations, or Certifications \n\n • CPA license is preferred; some assistance available for those seeking licensing.\n\n Work Schedule: \n 8AM - 5PM Monday-Friday \n Work Type: \n Full Time \n

Job Description Now Hiring: Commercial HVAC Service Technicians (Levels I, II & III) Multiple experience levels We are looking for experienced and entry-level Commercial HVAC Service Technicians to join a growing mechanical service team. Whether you're starting your HVAC career or have years of experience troubleshooting complex commercial systems, we have opportunities for technicians at all levels. This position involves servicing, maintaining, troubleshooting, and repairing commercial HVAC equipment, with opportunities for experienced technicians to take on leadership and mentoring responsibilities. Key Responsibilities • Troubleshoot, diagnose, repair, and maintain commercial HVAC systems and equipment., • Perform preventive maintenance and repairs on large and small commercial HVAC units., • Service and troubleshoot electrical components, controls, thermostats, switches, and related equipment., • Work with chilled water systems, boilers, chillers, hydronic systems, and other mechanical equipment., • Read and interpret mechanical drawings, wiring diagrams, and equipment schematics., • Identify equipment issues and recommend appropriate repairs., • Maintain accurate service records and communicate effectively with customers and team members., • Follow established safety procedures, including lockout/tagout requirements., • Participate in an on-call rotation, with occasional nights, weekends, and travel as needed. Experience Levels HVAC Technician I – Entry Level 0–2 years of experience. Ideal for someone beginning their commercial HVAC career with a solid understanding of mechanical systems and a willingness to learn. HVAC Technician II – Experienced 2–5 years of experience performing commercial HVAC service, maintenance, and troubleshooting. Must be comfortable working independently on commercial equipment, electrical components, and HVAC controls. HVAC Technician III – Senior Level 5–7+ years of commercial HVAC experience with advanced troubleshooting capabilities. Strong knowledge of chillers, boilers, hydronic systems, DDC controls, and building management systems (BMS). This position will also provide technical guidance and training to other technicians. Qualifications • High school diploma or GED required; technical degree preferred., • Commercial HVAC service and maintenance experience appropriate to the position level., • Strong mechanical and electrical troubleshooting skills., • Ability to read schematics and understand HVAC control systems., • Knowledge of refrigerant recovery procedures and HVAC safety standards., • Valid driver's license and acceptable driving record., • Texas TDLR Technician Certification and EPA Type I and II Certification required., • Strong communication skills and a customer-service mindset. Benefits Competitive benefits package • Medical, dental, and vision insurance available after 30 days., • 401(k) retirement plan., • $50,000 company-paid life insurance., • Six paid holidays after 90 days., • Paid time off starting after six months, increasing with tenure., • Opportunities for professional growth and advancement. If you're a commercial HVAC technician looking for a new opportunity with room to grow, we'd like to hear from you.

Job Description Experienced Residential HVAC Service Technician – Sales & Repair ASTAR Air Conditioning, Plumbing & Electrical | Dallas–Fort Worth, TX EXPERIENCED HVAC SERVICE TECHNICIANS – READY TO TAKE YOUR CAREER & EARNINGS TO THE NEXT LEVEL? ⭐ Are you an experienced Residential HVAC Service Technician who knows how to diagnose problems, build customer trust, and confidently present repair and replacement solutions? ASTAR IS LOOKING FOR PROVEN HVAC SERVICE & SALES PROFESSIONALS! We're looking for skilled, experienced technicians who bring more than basic maintenance knowledge. We want professionals who understand residential HVAC systems, can independently diagnose and repair equipment, recognize legitimate sales opportunities, and know how to communicate solutions that homeowners can trust. If you're already successful in residential HVAC service and sales and are looking for a company that supports your growth and earning potential, we want to talk to you! This position is ideal for an experienced Residential HVAC Service Technician, HVAC Service & Sales Technician, HVAC Selling Technician, or Senior HVAC Service Technician with a proven background in troubleshooting, customer service, and presenting repair and replacement options. This is NOT an entry-level or installer-only position. We are seeking experienced residential HVAC service professionals with demonstrated technical and customer-facing sales experience. ⭐ WHY TOP HVAC TECHNICIANS CHOOSE ASTAR At ASTAR, we understand that experienced technicians want more than another service truck. They want consistent opportunities, strong support, competitive compensation, and a company where their skills are valued. WHAT ASTAR OFFERS: • Performance-Based Earning Opportunities, • Year-Round Work & Consistent Service Demand, • Strong Marketing & Lead Generation Support, • ServiceTitan-Powered Operations, • FREE Employee Medical Insurance, • Dental & Vision Insurance, • Life Insurance, • 401(k) with Company Match up to 6%, • Paid Time Off (PTO), • Paid Holidays, • Paid Birthday Holiday, • Ongoing Technical, Sales & Leadership Training, • Career Growth & Advancement Opportunities, • Employee Assistance Program (EAP), • Financial Education & Training Resources, • Employee Recognition & Appreciation Programs, • Family-Owned Company Serving DFW Since 1996 WHAT YOU'LL BE DOING As a Residential HVAC Service & Sales Technician, you'll be responsible for diagnosing HVAC systems, delivering quality service, educating homeowners, and presenting repair and replacement solutions that meet their needs. HVAC Service & Diagnostics • Independently diagnose, troubleshoot, and repair residential heating and cooling systems, • Service split systems, heat pumps, gas furnaces, air handlers, and other residential HVAC equipment, • Diagnose electrical, mechanical, refrigerant, and airflow-related issues, • Perform heating and cooling system inspections and preventative maintenance, • Identify equipment failures, system inefficiencies, and performance concerns, • Recommend appropriate repairs and system improvements, • Complete accurate service documentation using ServiceTitan Sales & Customer Solutions • Conduct professional in-home HVAC evaluations, • Confidently explain diagnostic findings and repair recommendations to homeowners, • Present repair options, system upgrades, and HVAC replacement opportunities, • Provide clear estimates and help customers understand available solutions, • Identify legitimate opportunities for indoor air quality improvements, maintenance agreements, and equipment upgrades, • Build trust through honest recommendations and professional communication, • Work closely with sales and installation teams to ensure a smooth customer experience, • Contribute to individual and team performance goals while maintaining ASTAR's quality standards WHAT WE'RE LOOKING FOR WE WANT EXPERIENCED TECHNICIANS WHO KNOW HOW TO SERVICE, TROUBLESHOOT & SELL RESIDENTIAL HVAC SOLUTIONS. REQUIRED EXPERIENCE & QUALIFICATIONS: • 4+ years of hands-on Residential HVAC Service & Repair experience, • Proven experience independently diagnosing and repairing residential HVAC systems, • Previous experience presenting and selling HVAC repairs, upgrades, and replacement solutions, • Strong understanding of residential HVAC electrical, refrigerant, airflow, and mechanical systems, • Ability to troubleshoot heat pumps, gas furnaces, split systems, and air conditioning equipment, • Experience communicating repair estimates and equipment recommendations to homeowners, • Strong customer service, communication, and relationship-building skills, • Ability to manage service calls independently and make sound technical decisions, • Goal-oriented with a commitment to quality workmanship and customer satisfaction, • Comfortable using mobile technology and documenting service calls PREFERRED EXPERIENCE: • Previous experience in a performance-based or commission-incentivized HVAC service role, • Experience using ServiceTitan, • Experience with HVAC replacement opportunities, repair conversion, and service agreement sales, • Previous experience as a Senior HVAC Service Technician or HVAC Selling Technician ✅ REQUIRED CERTIFICATIONS • EPA Type II or Universal Certification – Required, • Active Texas TDLR HVAC Registration or applicable License – Required, • Valid driver's license with an insurable driving record, • Ability to meet applicable background and driving requirements ⭐ WHAT SUCCESS LOOKS LIKE AT ASTAR YOU KNOW HVAC. You can diagnose and repair residential systems independently, not just perform routine maintenance. YOU KNOW HOW TO COMMUNICATE. You can explain technical problems in a way homeowners understand. YOU KNOW HOW TO PRESENT SOLUTIONS. You're comfortable discussing repair costs, replacement options, and system improvements without pressuring customers. YOU TAKE OWNERSHIP. You manage your calls professionally, follow through, and stand behind your work. YOU'RE MOTIVATED TO SUCCEED. You take pride in your performance, want to grow your income, and understand the importance of customer trust. WHY ASTAR? 30 YEARS OF SERVING DFW! Since 1996, ASTAR Air Conditioning, Plumbing & Electrical has built its reputation on quality workmanship, customer service, and treating people right. Our culture is built around our F.I.R.E. Core Values: FUN – Enjoy what you do and the people you work with. INTEGRITY – Do the right thing, even when no one is watching. RESPECT – Treat customers and teammates the right way. EXCELLENCE – Take pride in your work and always strive to improve. We're looking for experienced professionals who want to be part of a growing team, deliver outstanding service, and build a successful long-term career. ⭐ EXPERIENCED HVAC TECHNICIANS – LET'S TALK! If you have proven residential HVAC service experience, strong diagnostic skills, and the ability to confidently present repair and replacement solutions, ASTAR wants to hear from you! We're looking for technicians who are ready to bring their experience, professionalism, and drive to a company that values their contributions. APPLY TODAY & JOIN THE ASTAR FAMILY! ⭐ Your Experience. Your Performance. Your Future with ASTAR. \nCompany Description We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations. We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Job Description: As a Refrigeration Technician, you will work with the maintenance team to maintain, troubleshoot, and repair HVAC, Refrigeration and facilities equipment to maintain critical temperatures and improve reliability of our systems. This role is the resident expert in refrigeration systems. Shift: Monday to Friday - 7:00am to 3:30pm You will.. • Maintain and operate industrial refrigeration systems including large rack systems, split systems, blast chillers, cooling towers and ancillary equipment., • Lead and educate compliance with all safety, food safety, and security standards., • Perform preventive maintenance and routine inspections on assigned refrigeration and HVAC systems and ancillary equipment as needed., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower-level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in refrigeration., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced refrigeration processes, tools and techniques., • Audit maintenance personnel work and provide feedback to improve performance and quality., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • Write and/or modify PMs to standardize across the network and increase effectiveness., • Repair and perform predictive and preventative maintenance procedures on CO2 and Freon refrigeration systems including, but not limited to compressors, pumps, fans, heat exchangers, glycol systems, various industrial utility systems, motors, and power distribution systems., • Give direction and/or training to entry level refrigeration technicians including, but not limited to day-to-day operations, inspections and inspection techniques, basic repairs and repair techniques, and conformance to all state, local, and HelloFresh regulations and policies., • Perform building project work as assigned. You have.. • 4-6 years of experience with refrigeration repair and maintenance in an industrial setting,, • Advanced understanding of rack system refrigeration and associated equipment., • Experience with repair and maintenance of glycol systems, heat exchangers, HVAC, and water chiller systems., • Experience with electrical systems including single and three phase motor systems, power distribution, and low voltage controls with the ability to troubleshoot to the component level., • Current Environmental Protection Agency (EPA) Section 608 certification., • All necessary regulatory licenses required by local municipalities to work in the field of industrial refrigeration., • Ability to demonstrate excellent work habits in line with Good Manufacturing Practices (GMP’s)., • Ability to conform to all OSHA, PSM, HAZMAT, and HelloFresh safety programs and regulations., • Ability to demonstrate understanding of proper handling and recycling procedures for chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), Hydrofluro-Olefins (HFO), CO2, and other industry standard refrigerant types., • Ability to safely replace mechanical and electrical components including motors, motor starters, switches, solenoids, pumps, refrigeration valves, compressors, and auxiliary refrigeration equipment., • Experience working with a wide range of networked refrigeration controls platforms., • Ability to withstand walking, lifting, bending, stooping, climbing ladders, walking on roofs, and working in confined spaces., • Basic computer skills., • Ability to read and understand drawings, schematics and diagrams., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude. You’ll get… • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+, • Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. Texas Pay Range$37.50—$37.50 USDAbout HelloFresh We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers’ homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work! At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at: • Europe: EUaccommodations@hellofresh.com, • APAC: APACaccommodations@hellofresh.com, • United States: USCandidateAccommodations@hellofresh.com, • Canada: CAaccommodations@hellofresh.com

Hours of Work : As needed\n Days Of Week : As needed\n Work Shift : \n Job Description : \n Your Job: \n In this highly technical allied imaging professional position, you'll collaborate with a multidisciplinary team to provide the very best imaging services, which include ultrasound, CT scan, PET scan, interventional radiology, digital mammography, and nuclear medicine. The primary purpose of the Registered Diagnostic Medical Sonographer with RVT position is to provide diagnostic patient care services using ultrasound and related diagnostic techniques to perform routine, vascular, interventional, and non-invasive procedures. \n Your Job Requirements: \n • Graduate of an approved Diagnostic Ultrasound Program \n • In addition to required entry level registries, the sonographer must demonstrate clinical competency in performance of abdomen, obstetric, and gynecologic, or vascular procedures \n • Current Basic Life Support certification \n • RDMS - Abdomen or OB/GYN or ARRT (S) \n • RVT (ARDMS), VS (ARRT), or RVS/RCVT (CCI) \n • 1 year experience in breast sonography required \n Your Job Responsibilities: \n • Communicate clearly and openly \n • Build relationships to promote a collaborative environment \n • Be accountable for your performance \n • Always look for ways to improve the patient experience \n • Take initiative for your professional growth \n • Be engaged and eager to build a winning team \n Methodist Richardson Medical Center is a 443-bed, full-service, acute care hospital that serves Richardson, Garland, Plano, and surrounding areas in Dallas and Collin counties. We are a Certified Comprehensive Stroke Center as well as the nation’s first hospital to receive The Joint Commission’s Gold Seal of Approval® for Pancreatic/Hepatic/Biliary Cancer Certification. We also provide services at Methodist Richardson Medical Center – Campus for Continuing Care, which include a behavioral health and addiction recovery unit, inpatient rehabilitation, long-term acute care, and more. We strive to have a diverse workforce that reflects the communities we serve and welcomes the skills and talents of all groups. Our reputation as an award-winning employer shows in the distinctions we’ve earned:\n\n • Magnet®-designated hospital\n, • 150 Top Places to Work in Healthcare by Becker’s Hospital Review, 2023\n, • Top 10 Military Friendly® Employer, Gold Designation, 2023\n, • Top 10 Military Spouse Friendly® Employer, 2023\n, • Level III Neonatal Intensive Care Unit\n, • Level III Trauma Center\n

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 122,000 colleagues serve people in more than 160 countries. About Abbott Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology. Our diagnostic solutions are used in hospitals, laboratories, and clinics around the globe. The crucial information derived from our tests, instruments and informatics systems are often the first step in patient care decision making for hundreds of health conditions from heart attacks to blood disorders to infectious diseases and cancers. Working at Abbott At Abbott, you can do work that matters, grow, and learn, care for yourself and family, be your true self and live a full life. You’ll also have access to: • Career development with an international company where you can grow the career you dream of., • Employees can qualify for free medical coverage in our Health Investment Plan (HIP) PPO medical plan in the next calendar year., • An excellent retirement savings plan with high employer contribution, • Tuition reimbursement, the student debt program and education benefit - an affordable and convenient path to getting a bachelor’s degree., • A company recognized as a great place to work in dozens of countries around the world and named one of the most admired companies in the world by Fortune., • A company that is recognized as one of the best big companies to work for as well as a best place to work for diversity, working mothers, female executives, and scientists. The Opportunity Our location in Irving, TX currently has an opportunity for a Jr. Customs and Trade Compliance Analyst. This team member will provide technical and analytical support for Customs and trade compliance matters at the site/division level, ensuring compliance with all relevant customs regulations and trade laws and regulations, including 19CFR,15CFR, FDA, USDA, and other US regulatory agency requirements. Depending on the site/division, incumbents in this position may specialize solely in import or export-related activities or may be involved in both What You’ll Work On • Responsible for compliance with applicable Corporate and Divisional Policies and Procedures., • Applies working knowledge of import/export regulations and requirements to support business needs., • Assist site/division Customs and Trade Compliance personnel in completing HTSUS and/or ECCN classifications and addressing import and export compliance issues related to 19 CFR and 15 CFR., • Conduct effective and timely transactional review/audit of all import/export records., • Consolidate and analyze import/export data to identify risks or opportunities for savings., • Prepare reports and make recommendations to management, as appropriate., • Provide analytical support related to all related customs requests for information, Post-Entry Amendments and Prior Disclosures., • Ensure proper classification, valuation, and origin determination for the site’s imported/exported goods, including non-commercial goods., • As directed by Supervisor/Manager, implement appropriate corrective actions in response to any audit requests., • Actively share customs and logistics expertise and data with cross-functional teams (logistics, purchasing, materials management, etc.); guiding them through decisions that potentially could be impacted by customs regulations., • Provide analytical support to general import/export-related projects., • Operates with general direction and supervision from the Supervisor/Manager., • Train and keep up to date on latest Customs, FDA and other government agency import regulations as well as U.S. Export laws, policies, and Administration Regulations., • Must have the ability to analyze opportunities and make recommendations on options and/or alternatives to achieve divisional financial objectives., • The Analyst will be privy to highly confidential financial information and must work within the scope of attorney/consultant and client privilege, where deemed appropriate., • The proper balance between cost optimization and compliance must be maintained., • Maintain constant communication/interaction with internal and external stakeholders to ensure quick responses and satisfactory outcomes., • Support and sustain a lean culture of continuous process improvement. Required Qualifications • 3-5 years related experience: Export/Import Compliance (specifically CBP, EAR, FTA, USMCA etc..) Preferred Qualifications • Bachelor’s degree in supply chain, logistics, finance or related field, • Intermediate Microsoft Office Skills with proficiency in Excel, • Excellent written, verbal and analytical skills with attention to detail., • Self-starter, adaptable, can work in ambiguity and independently., • Work complex issues across systems and organizations be able to understand how they interrelate, • Ability to work across teams and time zones, • Possess strong work ethic and have a demonstrated record of working successfully in a with time sensitive documents., • Strong interpersonal and problem-solving skills, • Ability to understand auditing documents, • Strong financial skills and understanding of how to read and use government regulations, • Proficient with statistics and analysis, • Acute attention to detail Learn more about our health and wellness benefits, which provide the security to help you and your family live full lives: _ Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity. Connect with us at , on Facebook at and on Twitter @AbbottNews and @AbbottGlobal. The base pay for this position is $50,700.00 – $101,300.00. In specific locations, the pay range may vary from the range posted.

Job Description A client of AlphaStaffHCM™ is seeking Electrical Professionals at all experience levels, from Entry-Level Electrical Helpers and Apprentices to Journeyman and Master Electricians. This client supports large-scale industrial, commercial, and construction projects and is committed to delivering safe, high-quality electrical solutions through a skilled and dependable workforce. Job Description: We are actively seeking qualified Electrical Professionals for current and future opportunities. Candidates with experience in electrical installation, maintenance, troubleshooting, repair, and construction are encouraged to apply. Opportunities may be available across a variety of project environments, including industrial facilities, manufacturing plants, commercial buildings, distribution centers, and construction sites. Whether you are beginning your electrical career or bring extensive leadership and licensing experience, we welcome candidates who are dedicated to safety, quality workmanship, and continuous professional growth. Key Responsibilities: • Assist with the installation, maintenance, troubleshooting, and repair of electrical systems and equipment., • Read and interpret electrical blueprints, schematics, wiring diagrams, and technical specifications., • Install conduit, cable trays, wiring, lighting systems, panels, switchgear, and other electrical components., • Perform preventive maintenance and inspections on electrical systems to ensure reliability and compliance., • Diagnose electrical issues and implement effective repairs while minimizing downtime., • Follow all applicable electrical codes, safety regulations, and company policies., • Use hand tools, power tools, testing equipment, and meters safely and effectively., • Collaborate with project managers, supervisors, engineers, and other trades to complete projects on schedule., • Maintain accurate records of work performed, materials used, and service activities., • Support commissioning, startup, and testing activities as required., • Maintain a clean, organized, and safe work environment., • Provide mentorship and technical guidance to less experienced electricians when applicable., • Lead crews, coordinate work assignments, and oversee project execution for senior-level and licensed professionals., • Perform additional duties as assigned based on project needs and experience level. Must Have Qualifications: • High School Diploma, GED, or equivalent., • Experience working in electrical construction, industrial maintenance, commercial electrical work, or related electrical environments., • Basic understanding of electrical systems, tools, and safety practices., • Ability to read and interpret electrical drawings and technical documents, depending on experience level., • Strong mechanical aptitude and troubleshooting skills., • Reliable transportation and ability to report to assigned work locations., • Ability to work in indoor and outdoor environments and perform physical job duties., • Ability to lift, carry, push, and pull materials and equipment as required., • Ability to work overtime, weekends, and varying shifts when project demands require., • Strong communication, teamwork, and problem-solving skills. Nice to Have Qualifications • Electrical Helper, Apprentice, Journeyman, or Master Electrician experience., • Current Apprentice Registration, Journeyman Electrician License, or Master Electrician License., • Industrial, commercial, manufacturing, distribution center, or construction project experience., • Experience with PLCs, motor controls, VFDs, instrumentation, or automation systems., • NFPA 70E, OSHA 10, OSHA 30, NCCER, or other industry certifications., • Experience with medium-voltage and high-voltage electrical systems., • Experience supervising crews or leading electrical projects., • Knowledge of National Electrical Code (NEC) requirements and compliance standards., • Technical school, vocational training, or associate degree in Electrical Technology or related field., • Military electrical or technical experience. Compensation and Perks • Competitive pay based on experience, certifications, and licensing level., • Potential overtime opportunities., • Career advancement opportunities across multiple skill levels., • Training and professional development opportunities., • Comprehensive benefits package may be available, including medical, dental, vision, and retirement savings options., • Opportunity to work on large-scale industrial, commercial, and construction projects. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Description\n \n Summary: \n The Accountant Lead is responsible for preparing general ledger month-end journal entries in accordance with Generally Accepted Accounting Principles, review of journal entries as assigned, and financial statement analysis relevant to their assigned functional accounting team. \n Functional Accounting Teams are as follows: \n Cash Accounting \n Fixed Assets Accounting \n Corporate Accounting \n Payroll Accounting \n Investments and Foundation Accounting \n Prepaid Asset, Deferred Revenue, and Notes Payable Accounting \n Inventory and Supplies Accounting \n Physician Guarantees and Physician Fees Accounting \n Purchased Services and Non-Patient Accounts Receivable Accounting \n Contract Labor and Utilities Accounting \n Joint Venture Accounting \n Intercompany Accounting, Allocations, and Eliminations \n Lease Accounting \n Technical Accounting \n Health Plan Accounting \n Physician Group Accounting \n Grant Accounting \n This job requires a strong understanding of United States Generally Accepted Accounting Principles (US GAAP). The Lead Accountant should be able to demonstrate an understanding of the purpose of the journal entries they are recording to the general ledger, evaluate the appropriateness of the entry (including the GL accounts used and the financial statement line item classification), and explain the impact to the financial statements. The Lead Accountant will typically be assigned to areas of higher risk and more complex accounting within the functional accounting team. They are responsible for ensuring appropriate and relevant supporting documentation is attached to the journal entry. The Lead Accountant is responsible for evaluating the source of the information for their journal entries and asking appropriate followup questions to ensure documentation is appropriate. In some cases, appropriate support will include developing estimates of the current month activity based on financial analysis of historical data. The Lead Accountant is expected to develop an understanding of healthcare specific accounting issues relevant to the assigned functional accounting area. Previous healthcare experience is preferred but not required. The Lead Accountant is responsible for analyzing and providing variance explanations (from budget and trend) related to assigned areas. The Lead Accountant is responsible for completion of monthly balance sheet account reconciliations related to the assigned functional accounting area. \n The Lead Accountant reports directly to the Accounting Manager and is responsible for assisting their Accounting Manager with supervision and training of accountants on the assigned functional team. The Lead Accountant will be assigned lower risk areas to review journal entries and balance sheet reconciliations. The Lead Accountant is expected to function at a high level of accounting knowledge coupled with ability to direct others and give feedback on a daily basis as to work product. Overall performance evaluation is not the direct responsibility of this job; however, the expectation is for the Lead Accountant to provide specific and documented feedback on the work of the accountants to the Accounting Manager to be incorporated into performance evaluations of those Associates. \n The Lead Accountant is expected to assist the Accounting Manager in ensuring the team is meeting month-end close deadlines and communicating timely when any deviation from the close schedule is expected. The Lead Accountant should proactively look for ways to make our processes more efficient and maintain or reduce the overall close timeline. Timeliness, accuracy, and the ability to prioritize and meet critical deadlines are essential. The Lead Accountant is expected to lead efforts in improving processes for preparation of financial statements and related reports/schedules, ensuring reporting accuracy and building relationships throughout the System that achieve these goals. \n For each month-end close, the Lead Accountant will work with the Manager to accumulate and summarize variance analysis results for both the functional area and the Manager’s assigned regional responsibilities. The Lead Accountant will be responsible for assisting the Accounting Manager in preparing materials for and participating in month-end financial review calls with the regional CFOs. The job requires strong analytical skills and the ability to problem solve. Lead accountant will be required to review financial and non-financial information in various modules with in Infor CloudSuite relevant to their functional area, including but not limited to the following modules: GL, BI/FSM, Inventory, Purchasing, Fixed Assets, Cash, etc. as part of the research and review of financial statement variances. \n The Lead Accountant is responsible for assisting other teams across the System (both at the corporate office and at our facilities) with information requests related to the assigned functional area, as needed. The Lead Accountant is expected to work closely with other teams to resolve issues timely and to the satisfaction of all parties. The Lead Accountant is responsible for other projects, as assigned, which may include but are not limited to: research of GL transactions to understand the impact to the GL, process improvement projects, and assistance for the year-end external audit. The job requires excellent written and verbal communication skills. \n Responsibilities: \n\n • Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.\n, • Prepare month-end journal entries in accordance with US GAAP, with complete and accurate supporting documentation.\n, • Independent analysis of applicable accounting guidance (FASB, AICPA, etc.) to guarantee the proper treatment of financial transactions and ensuring compliance with U.S. Generally Accepted Accounting Principles (US GAAP).\n, • Perform variance analysis on assigned accounts to both budget and trend.\n, • Prepare month-end balance sheet reconciliations.\n, • Review month-end journal entries and account reconciliations prepared by accountants, as assigned. Provide feedback to accountants as necessary and ensure entries are appropriate and include appropriate documentation.\n, • Assist Manager with onboarding and training accountants.\n, • Assist Manager with accumulating and analyzing month-end variance analysis for assigned functional area and assigned regional responsibilties.\n, • Identify errors and research areas of concern. Communicate issues to Accounting Manager and provide potential solutions.\n, • Drive process improvements to ensure the team becomes more efficient.\n, • Develop and maintain excellent working relationships with other teams across the System (both at the corporate office and at our facilities).\n, • Support Senior Management, Regional and Corporate Associates with data requests and analyses.\n\n Job Requirements: \n Education/Skills \n\n • Bachelor's Degree in Accounting or equivalent required.\n\n Experience \n\n • 7 years of accounting experience required.\n, • General ledger accounting experience and Healthcare accounting experience preferred.\n\n Licenses, Registrations, or Certifications \n\n • Candidates seeking CPA license preferred; some assistance available for those seeking licensing.\n\n \n Work Schedule: \n 5 Days - 8 Hours \n Work Type: \n Full Time

Full-time Description Location: Palm Beach, FL Area Position Type: Full-Time Salary Range: $45,000-$55,000 Annually At Powernet, we don’t just deliver top-tier wireless, voice, Managed IT, and security solutions—we make connecting businesses seamless, smart, and reliable. We’re a team of innovators, problem solvers, and tech enthusiasts who believe work should be rewarding, collaborative, and full of high-fives (virtual or in-person!). If you are eager to launch your IT career, love diving into hands-on technical troubleshooting, and get excited about helping people solve tech puzzles, you’ve found your crowd. • 5 weeks PTO, • Remote work flexibility, • Anniversary gift plan, • Employee referral program, • Health, vision, dental, and life insurance available, • HSA Account, • 401(k) matching As our Entry-Level Help Desk Technician, you are the first line of defense for our technical support operations! You’ll serve as an essential problem solver, taking incoming help desk calls, resolving support tickets, and ensuring our clients have a seamless technology experience. From imaging PCs and setting up user workstations to monitoring system alerts, managing Active Directory permissions, and assisting with installations, you’ll play a key role in keeping our systems and clients running smoothly every day. 1. End-User Support & Day-to-Day Troubleshooting • Answer incoming help desk phones, log detailed ticket notes, and respond to end-user support requests promptly and professionally., • Perform first-level troubleshooting for Microsoft Windows in domain environments, Office 365, Google Workspace, and anti-virus applications., • Manage file/folder permissions, user accounts, and basic configurations within Active Directory and Group Policy. 1. Workstation Setup & Deployment Assistance • Image PCs and configure desktop workstations, laptops, printers, scanners, and copiers for end users., • Assist senior technical teams with technology upgrades, network deployments, and hardware/software implementations., • Provide both remote and periodic on-site assistance to resolve local hardware, cabling, and wiring needs. 1. Alert Monitoring & Systems Hygiene • Actively monitor incoming system alerts, conduct initial research, resolve routine issues, and escalate complex incidents to upper-tier engineering teams when required., • Maintain squeaky-clean records, documenting technical solutions, updating service requests, and keeping configuration logs current., • Participate in a rotational on-call schedule to support critical client needs and maintain strict service level agreements (SLAs). This is a remote-friendly position that may require occasional local travel for on-site hardware deployments, workstation setups, or equipment replacements. You should be comfortable managing multiple activities simultaneously in a fast-paced environment, communicating clearly over the phone and via chat, and maintaining a positive, customer-first attitude. Requirements What You Bring to the Table • Education: High School Diploma or GED required (Associate Degree in Information Technology or a related field preferred)., • Technical Fundamentals: Hands-on familiarity or entry-level experience supporting Microsoft Windows, Active Directory, Group Policy, Office 365, and Google Suite., • Hardware & Infrastructure Awareness: Basic knowledge of PC imaging, workstation setup, cabling/wiring, and anti-virus software (experience with network equipment troubleshooting is a big plus!)., • Problem-Solving Mindset: Strong diagnostic skills with the ability to research, troubleshoot, and document technical issues quickly., • Communication & Service: Outstanding customer service, clear communication, and a passion for helping non-technical users solve problems., • Driver Requirements: Must possess a valid driver’s license for periodic local deployment support. Salary Description $45,000-$55,000 annually

Job Description ASTAR Air Conditioning, Plumbing & Electrical | Dallas–Fort Worth, TX Experienced electrician? You shouldn't have to choose between great pay, steady calls, and a company that actually supports you. Choose a compensation path that rewards your experience. Experienced service electricians can earn through our performance-based compensation program with uncapped earning potential. Qualified experienced hires receive guaranteed income during their initial ramp period while learning ASTAR's systems, processes, and customers. High performers: $120K–$150K+ 90-day income guarantee for qualified experienced hires First 90 days: $1,200–$1,400/week guaranteed OR earned commission, whichever is greater. ASTAR is growing our residential electrical service department and we're looking for experienced, licensed electricians who know how to diagnose problems, communicate with homeowners, and deliver high-quality work. This is not an entry-level position. We provide the call volume, benefits, training, dispatch support and opportunity—you bring the electrical expertise and customer service. ⭐ WHY EXPERIENCED ELECTRICIANS CHOOSE ASTAR At ASTAR, we believe great electricians deserve great opportunities, competitive earning potential, and a company that invests in their success. ASTAR PERKS & BENEFITS: • $80K–$150K+ Annual Earning Potential, • 90-Day Income Guarantee for Qualified Experienced Hires, • Uncapped Performance-Based Earning Opportunities, • FREE Employee Medical Insurance, • Dental & Vision Insurance, • Life Insurance, • 401(k) with Company Match up to 6%, • Paid Time Off (PTO), • Paid Holidays, • Paid Birthday Holiday, • Consistent Year-Round Service Opportunities, • Dedicated Customer Service & Dispatch Support, • ServiceTitan-Powered Operations, • Ongoing Technical, Sales & Leadership Training, • Career Growth & Advancement Opportunities, • Employee Assistance Program (EAP), • Financial Education & Training Resources, • Employee Recognition & Appreciation Programs, • Family-Owned Company Serving DFW Since 1996 WHAT YOU'LL BE DOING As a Residential Electrical Service Technician, you'll help homeowners throughout the DFW area diagnose electrical issues, complete quality repairs, and make informed decisions about their home's electrical systems. Your responsibilities include: • Diagnose, troubleshoot, and repair residential electrical systems, • Perform electrical inspections, maintenance, and service repairs, • Troubleshoot electrical panels, breakers, circuits, switches, outlets, GFCIs, and wiring, • Identify electrical hazards and recommend safe, code-compliant solutions, • Perform electrical panel repairs, upgrades, and component replacements within your license authorization, • Install and replace electrical fixtures, devices, and equipment, • Explain electrical findings, repair options, and recommendations clearly to homeowners, • Present repair estimates, electrical upgrades, and additional service solutions professionally, • Identify legitimate opportunities for electrical improvements and system upgrades, • Complete accurate service documentation using ServiceTitan, • Deliver professional, five-star customer service, • Follow applicable electrical codes, safety requirements, and ASTAR quality standards WHO WE'RE LOOKING FOR We're looking for experienced Residential Service Electricians who know how to troubleshoot, repair, and communicate with homeowners. Required Qualifications: • 5+ years of residential electrical experience preferred, including substantial hands-on service and repair experience, • Active Texas Electrical License – Required, • Proven experience independently diagnosing and repairing residential electrical systems, • Strong troubleshooting skills involving panels, circuits, breakers, wiring, and electrical components, • Knowledge of residential electrical codes and safety requirements, • Experience communicating repair recommendations and estimates directly to homeowners, • Strong customer service and communication skills, • Ability to work independently and make sound technical decisions, • Valid driver's license with an insurable driving record, • Ability to meet applicable background screening requirements Highly Preferred: • Texas Journeyman Electrician License, • Previous residential electrical service experience with a home-services company, • Experience presenting and selling electrical repairs, panel upgrades, and additional electrical solutions, • Experience working in a performance-based compensation environment, • Familiarity with ServiceTitan IMPORTANT: This is an experienced Residential Electrical Service & Repair position. We are not seeking apprentices or entry-level electricians for this opening. ⭐ WHAT MAKES YOU SUCCESSFUL AT ASTAR? YOU KNOW YOUR TRADE. You can confidently diagnose residential electrical issues and complete quality repairs. YOU TAKE OWNERSHIP. You manage service calls independently and take pride in getting the job done right. YOU KNOW HOW TO COMMUNICATE. You can explain electrical concerns and solutions in a way homeowners understand. YOU VALUE CUSTOMER TRUST. You make honest recommendations and provide solutions that meet customer needs. YOU'RE MOTIVATED TO SUCCEED. You want to grow your income, sharpen your skills, and build a successful career. WHY ASTAR? 30 YEARS OF SERVING DFW! Since 1996, ASTAR Air Conditioning, Plumbing & Electrical has been committed to delivering exceptional service, quality workmanship, and treating people right. We're continuing to grow our residential electrical service department and want experienced electricians who are ready to grow with us. Our culture is built around our F.I.R.E. Core Values: FUN – Enjoy what you do and the people you work with. INTEGRITY – Do the right thing, even when no one is watching. RESPECT – Treat customers and teammates the right way. EXCELLENCE – Take pride in your work and always strive to improve. ALREADY SUCCESSFUL SOMEWHERE ELSE? LET'S TALK! We know experienced electricians have options. If you're already running residential service calls, diagnosing electrical problems, and delivering great customer experiences, we'd like the opportunity to show you what ASTAR has to offer. Bring your experience. Explore greater earning opportunities. Build your future with ASTAR. APPLY TODAY & JOIN THE ASTAR FAMILY! ⭐ Experienced Electricians Wanted. Great Opportunities. Strong Support. Your Next Career Move Starts Here. Actual earnings vary based on performance and the applicable compensation plan. The 90-day income guarantee applies to qualified experienced hires. \nCompany Description We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations. We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.

Shift5 is the observability platform for onboard operational technology (OT). We’re a rapidly growing scale-up that specializes in cybersecurity, predictive maintenance, and compliance for OT systems across defense, aerospace, and rail. We are a collaborative, passionate, and driven cadre of dynamic, multidisciplinary experts focused on helping our customers’ fleets run smarter and safer by accessing and democratizing the volumes of onboard OT data generated by transportation, freight fleets, defense fleets, and other critical infrastructure. Come join us. Shift5 is seeking a Systems Engineer to join our team. In this role, you will be the bridge between our engineering teams and our real-world deployments. You will be responsible for overseeing how our system integrates into various DoW platforms, ensuring that all our subsystems—from embedded software, hardware, and cabling to visualization applications, networking schemes, and cloud environments—meet rigorous compliance and customer requirements. This role is hands-on and execution-oriented, focusing on systems engineering execution across one or more programs, including requirements management, system architecture, technical baseline control, and the delivery of formal systems artifacts (CDRLs/SDRLs) in support of U.S. Department of War (DoW) programs. This position is based out of our headquarters in Rosslyn, VA, but is open to remote candidates based out of San Diego, CA, Colorado Springs, CO, Fort Hood, TX, or Ogden, UT, and requires up to 30% travel to support customer site integrations and testing. • Platform Integration & Technical Execution: Define and design the integration of Shift5 software and hardware into customer platforms, including data interfaces, execution environments, OS-level configuration, network topology (TCP/IP, tactical radio/RF), encryption/key management, environmental qualification (MIL-STD), SWaP, cabling, and A-kit development. Identify and manage technical risks and dependencies. Requirements & Technical Baseline Management: Own and maintain system-level technical baselines across assigned programs. Oversee tracking, testing, and verification of compliance and customer requirements. Develop, decompose, and manage requirements documents (SRDs, SRSs, ICDs) and evaluate design updates for downstream program impact. CDRL & Technical Artifact Development: Lead the development, review, and delivery of formal systems engineering and Contract Data Requirements List (CDRL) artifacts for government acquisition programs, including V&V Plans, System Architecture/Design Documents, Configuration Management artifacts, and Technical Manuals. System Architecture & Design: Lead end-to-end, cross-discipline technical execution across software, platform, cyber, data science, and integration teams. Serve as the technical authority for system-level decisions across hardware, software, network, and platform interfaces. Verification, Validation & Test: Define system-level verification strategies, acceptance criteria, and testing execution. Perform system-level analyses including latency, throughput, network bandwidth allocation, platform stability, system safety, and fault tolerance (FMECA, Single-Point Failure). Program & Customer Engagement: Serve as a primary technical interface with customer engineering, PMOs, and certification authorities. Lead content development for formal technical reviews (SRR, PDR, CDR, TRRs) and define entry/exit criteria for milestone events. Mission-Critical Integration: You seamlessly bridge engineering teams and DoW platform deployments, ensuring complex hardware, software, and network subsystems meet strict airworthiness, safety, and compliance standards. Rigorous Baseline Control: You independently own and manage technical baselines, CDRL deliverables, and requirements traceability with zero friction across fast-moving defense acquisition programs. Cross-Disciplinary Technical Authority: You serve as a trusted technical lead across software, cyber, hardware, and platform teams, translating complex operational constraints into robust, scalable architecture designs. Customer & Program Execution: You build high-trust relationships with customer PMOs and engineering authorities, successfully navigating technical gates (PDR, CDR, TRR) to advance platform capabilities. Required: Education: Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, Mechanical Engineering, or a related technical field. Experience: 5+ years of experience in systems, integration, or software engineering, preferably within the aerospace, defense, or high-reliability electronics sectors. Government Acquisition Knowledge: Familiarity with common government contract documentation according to DIDs (SRD, SRS, IDD, ICD, SDD, CSA, etc.). Technical & Integration Skills: Strong understanding of configuration management, software/OS integration (Linux/Unix), network architectures (TCP/IP, routing, VLANs), radio/RF communications, encryption protocols, and basic hardware/cabling integration in safety-critical/airworthiness environments. Testing & Verification: Demonstrated experience with common system verification methods (Test, Inspection, Demonstration, Analysis), hardware-in-the-loop (HIL) lab environments, and software-in-the-loop setups. Security Clearance: Active Security Clearance. Soft Skills: Excellent written and verbal communication skills with the ability to coordinate across diverse engineering disciplines, project managers, and external government stakeholders. Preferred: Industry & Quality Standards: Familiarity with industry design standards such as DO-178 and DO-254. Quality Frameworks: Familiarity with quality standards such as AS9100 and ISO 9001. Base Salary: $143,000 - $156,000 Bonus program and equity in a fast-growing startup Competitive medical, dental, and vision coverage for employees and their families Health Savings Account with annual employer contributions Employer-paid Life and Disability Insurance Uncapped paid time off policy Flexible work & remote work policy Tax-deferred public transit benefits with Metro SmartBenefits (DC/MD/VA) We are committed to building an inclusive culture of belonging that embraces the diversity of our people and represents the communities in which we work and the customers we serve. We know the happiest and highest performing teams include people with diverse perspectives and ways of solving problems. We strive to attract and retain talent from all backgrounds and create workplaces where everyone feels empowered to bring their full, authentic selves to work. Shift5 is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identify, national origin, disability, age, marital status, ancestry, projected veteran status, or any other protected group or class. _

Job Description Maintenance Technician is responsible for safely maintaining, repairing, replacing, and modifying all processing, packaging and facility equipment with optimal quality and efficiency. Mechanic C is responsible for maintaining the operational readiness of the FR system using various systems and multiple technical strategies and similar control technology. Responsible for record keeping of chemical use, on site chemical inventories, assisting with bulk chemical deliveries and rinsing of chemical containers when emptied. Actively participates in the development and delivery of various training plans to ensure proper execution of system requirements. Performs a variety of technical troubleshooting and repair activities to ensure proper functioning of technical equipment and system reliability for FR equipment, Industrial Waste (IW) controls and related ancillary systems. Responsible for the neutralization system for chemical mixing room and ensuring correct pH levels are achieved before discharge to the IW system. Job Function Statements - Essential Functions: • Ability to operate our CMMS system and demonstrate 100% functionality to complete work orders as well as log corrective maintenance issues in the system., • Ability to effectively communicate with Production and other mechanics to identify problematic areas of concern; provide and receive feedback and/or support through collection and analysis of information., • Maintain equipment and perform basic mechanical tasks to keep equipment in optimal operating condition; ability to repair 40% of equipment without direction., • Perform some electrical repairs including AC & DC motor controls, solid state motor controls, advance circuits, and grounding diagrams; ability to test equipment within skill range., • Ability to read and understand schematics, drawings, and manuals to establish facts and draw a valid conclusion., • Ability to demonstrate mechanical, electrical, hydraulic, and pneumatic troubleshooting skills., • Must demonstrate an understanding of the company's objectives including productivity, yields, food safety, quality, customer service and cost goals; daily work activities should support achieving those goals., • Ability to demonstrate computer and math skills as part of daily activities such as fractions, decimals, percentages and the metric system, efficient with metric system, ratios, and formulas., • Perform daily inspections, emergency repairs, routine adjustments, and follow periodic preventive maintenance schedule., • Model professional workplace conduct and adherence to company policies such as the Code of Conduct, attendance, punctuality, efficient and productive work habits, and good personal hygiene., • Perform other duties as required or assigned., • Performs chemical mixes for batch creation as needed, • Performs process and mix batch testing as needed, • Maintains the validation and operation of the FR system and its components including but not limited to load cells, probes and chemical dosing pumps., • Responsible and accountable for production equipment effectiveness and reliability relative to assigned FR mixing systems and production equipment Responsible for data entry of chemical levels into touchscreens and computers systems to track, monitor and adjust chemical levels in the system Required Qualifications/Skills: • Must work effectively in a team setting., • Must demonstrate a basic ability to cross-train other mechanics as well as production personnel., • Knowledge of Microsoft computer programs, Outlook, Word, Excel. (Ability to enter data into the system)., • Ability to use Computerized Maintenance Management System to track orders, PM's and inventory., • Achieve a passing score on the Ramsay exam., • Ability to read, write and speak English is required. Other Desired Qualifications/Skills: • Use a multi-meter and other measurement instruments., • Troubleshoot PLC controls, such as Allen-Bradley, GE Fanuc., • Work with computer programs, such as Word and Excel., • Demonstrate proficient fabrication and welding systems., • Demonstrate welding skills., • Bilingual skills English / Spanish or other regional language. Experience: • 1-3 years' experience with industrial equipment {or 1 years of technical training}, preferably in a food processing facility., • Familiar with preventive or reliability-based maintenance., • Experience working with high-speed processing, packaging, weighing, filling and inspection equipment. Education/Training: • High School diploma, GED, or equivalent experience to support the Maintenance Skills Summary. Other Information: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job Description Overview MCI is one of the fastest-growing tech-enabled business services companies in the USA, with a strong call center footprint and operations that extend across multiple countries. We deliver Customer Experience (CX), Business Process Outsourcing (BPO), and Anything-as-a-Service (XaaS) cloud technology solutions across a wide range of industries, including healthcare, retail, government, education, telecom, technology e-commerce, and financial services. Our contact centers are powered by both on-site and remote agents, leveraging advanced technologies to enhance customer journeys, drive scalability and reduce costs. At MCI we are committed to fostering an environment where professionals can build meaningful careers, access continuous learning and development opportunities and contribute to the success of a globally expanding, industry-leading organization. We are seeking an experienced Call Center Client Account Manager I to manage complex business process outsourcing (BPO) accounts. In this role, you will oversee enterprise and public sector client relationships, ensuring exceptional service delivery and operational success. This is a senior-level position requiring proven experience in contact center account management. A background in both contact center operations and client services or account management is highly preferred. The ideal candidate is an effective communicator, confident presenter, and skilled relationship builder who demonstrates strong ownership, professionalism, and a results-driven work ethic. This is a full-time, office-based position with up to 20% travel required. As the primary point of contact for both the client and MCI's operations and shared services teams, you will manage day-to-day client relationships, drive strategic initiatives, oversee change management, ensure process compliance, and deliver outstanding service. To be considered for this role, you must complete a full application on our company careers page, including all screening questions and a brief pre-employment test. Responsibilities Key Responsibilities: • Develop a detailed understanding of client products and services, • Process design and implementation, • Client scorecards and business reviews, • Ongoing continuous improvement, • Issue identification and resolution, • Project management of new launches and initiatives, • Program efficiency and financial performance Qualifications WONDER IF YOU ARE A GOOD FIT FOR THIS POSITION? It's about building relationships and turning the knowledge; you gain in training into customer wins. Representatives make a difference to customers and the company, providing over-the-phone customer service, sales, and technical support. We provide all new employees with world-class training, so all positive, driven, and confident applicants are encouraged to apply. Ideal candidates for this position are highly motivated, energetic, and dedicated. Required • Must be 18 years of age or older, • High school diploma or equivalent, • Experience with data-entry utilizing a computer, • The ability to read and speak English fluently, • Have a wired, high-speed internet connection (Download speed of 20Mbps+), • Excellent organizational, written, and oral communication skills, • The ability to type swiftly and accurately (20+ words a minute), • Ability to work regularly scheduled shifts within our hours of operation including the training period., • Basic knowledge of Microsoft Office Suite (Excel, PowerPoint, Word, Outlook), • Familiarity with computer and Windows PC applications and the ability to learn new and complex computer system applications, • Highly reliable with the ability to maintain regular attendance and punctuality, • The ability to evaluate, troubleshoot, and follow-up on customer issues, • An aptitude for conflict resolution, problem solving and negotiation, • Must be customer service oriented (empathetic, responsive, patient, and conscientious), • Ability to multi-task, stay focused, and self-manage, • Strong team orientation and customer focus, • The ability to thrive in a fast-paced environment where change and ambiguity are prevalent, • Excellent interpersonal skills and the ability to build relationships with your team and customers Preferred (Not Required) • One (1) year of experience in customer service, technical support, inside sales, back-office, chat, or administrative support in a contact center environment, • State or Federal work experience

Job Description Job Description Multi-Skilled Technician (All DCs) This position is responsible for assisting in the operation of a department. An individual in this position will be expected to perform additional job related responsibilities and duties throughout the facility as assigned and/or as necessary. Essential Functions An individual must be able to successfully perform the essential functions of this position with or without a reasonable accommodation. Communicate with (or to) individuals or groups verbally and/or in writing (e.g. customers, suppliers, associates). Complete work orders, records, logs and other written or computer-based documents according to established procedures. Perform preventive maintenance and repairs on equipment (e.g., lift trucks, pneumatic systems, material handling equipment, hydraulic equipment, dock equipment, banana room equipment, electronic and electrical equipment, etc.) according to procedures. Operate material handling equipment, battery equipment, moving machinery, and other powered equipment. Diagnose refrigeration and electrical problems using technical drawings (e.g., blueprints, electronic/mechanical schematics) and diagnostic tools (e.g. multi-meter, laptop). Assist other maintenance technicians in the repair and maintenance of equipment. Troubleshoot and repair complex electrical/electronic problems with equipment, networks, logic controls, Programmable Logic Controllers (PLCs) and external Input/Output (I/O) devices where the repair is not immediately visible or obvious. Key Skills The following key skills are required to perform one or more essential functions of this position. Troubleshooting (Problem Solving), Programmable Logic Controllers, Electrical Systems, Preventive Maintenance, Material Handling Equipment Leadership Expectations An individual must be proficient in each of the competencies listed below to successfully perform the responsibilities of this position Respect the Individual:Embraces differences in people, cultures, ideas, and experiences; creates a workplace where associates feel seen, supported and connected through a culture of belonging; creates opportunities for all associates to thrive and perform; helps to attract the best talent. Respect the Individual:Works as a team; builds strong and trusting relationships; communicates with impact, energy, and positivity to motivate and influence. Respect the Individual:Strengthens the team by helping, developing and mentoring others; recognizes others’ contributions and accomplishments. Act with Integrity:Maintains and promotes the highest standards of integrity, ethics and compliance, models the Walmart values to support and foster our culture; holds oneself and others accountable; supports Walmart’s goal of becoming a regenerative company by making a positive impact for associates, customers, members, and the world around us. Act with Integrity:Acts in a selfless manner and is consistently humble, self-aware, honest, fair, and transparent. Serve our Customers and Members:Delivers results while putting the customer first. Serve our Customers and Members:Makes decisions based reliable information; balances short- and long-term priorities; and considers how own work impacts the team’s ability to deliver on our purpose for all stakeholders. Strive for Excellence:Displays curiosity and a desire to learn; takes calculated risks; and demonstrates courage and resilience. Strive for Excellence:Drives continuous improvements; is open to and uses new technologies? and skills; and supports others through change. Physical Activities The following physical activities are necessary to perform one or more essential functions of this position. Enters and locates information on computer. Moves up and down a ladder. Moves up and down stairs. Grasps, turns, and manipulates objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Visually verifies information, often in small print. Reads information, often in small print. Visually locates merchandise and other objects. Visually inspects equipment. Reaches overhead and below the knees, including bending, twisting, pulling, and stooping. Moves, lifts, carries, and places merchandise and supplies weighing up to 50 pounds without assistance. Apply sideways/upward/downward pressure to tighten and loosen hardware (for example, nuts, bolts). Observe behavior of others (i.e., associates, customers, suppliers). Wear personal protective equipment (PPE) as required, which could include, but not be limited to fall protection, eye protection, hearing protection, respiratory protection, chemical protection and electrical protection such as protective footwear. Operate motor vehicle or other large power equipment. Use approved equipment to step up and access freight and equipment in elevated areas. Use crossovers to access opposite sides of conveyors. Differentiate sounds in order to inspect and maintain equipment, identify potential hazards, or recognize safety alarms. Lift, push, pull, and carry tools, objects or equipment above shoulder level without assistance. Write documents, reports, etc. using a writing instrument (e.g., pencil, pen) or computer. Work Environment Working in the following environment is necessary to perform one or more of the essential functions of this position. May work with substances that require special handling Works in areas requiring exposure to varying temperatures, extreme heat or cold, and/or wet, damp, or drafty conditions. Moves over sloping, uneven, or slippery surfaces. Works at heights. Work indoors for extended periods of time. Move through narrow, enclosed, or elevated spaces. Work outdoors for extended periods of time. Work in areas with high noise levels that may require hearing protection. Work in areas with industrial conditions (e.g., elevated noise levels, strobing lights, electromagnetic (EM) fields). Entry Requirements Minimum Qualifications • Coursework or certification in electronic technology and 2 years' experience in industrial maintenance specializing in electronic technology (including troubleshooting and repairing automated equipment) OR 3 years' experience in industrial maintenance specializing in electronic technology (including troubleshooting and repairing automated equipment) Preferred Qualifications • Associate's Degree in electronic technology AND 2 years' experience in industrial maintenance specializing in electronic technology (including troubleshooting and repairing automated equipment)

Job Description This position is responsible for assisting in the operation of a department. An individual in this position will be expected to perform additional job related responsibilities and duties throughout the facility as assigned and/or as necessary. Essential Functions An individual must be able to successfully perform the essential functions of this position with or without a reasonable accommodation. Communicate with (or to) individuals or groups verbally and/or in writing (e.g. customers, suppliers, associates). Complete work orders, records, logs and other written or computer-based documents according to established procedures. Perform preventive maintenance and repairs on equipment (e.g., lift trucks, pneumatic systems, material handling equipment, hydraulic equipment, dock equipment, banana room equipment, electronic and electrical equipment, etc.) according to procedures. Operate material handling equipment, battery equipment, moving machinery, and other powered equipment. Clean and maintain grounds, parking lots, fencing and building facilities (e.g., bathrooms, plumbing). Read and understand technical drawings (e.g., blueprints, electronic/mechanical schematics) to repair/maintain equipment. Assist other maintenance technicians in the repair and maintenance of equipment. Troubleshoot complex problems with equipment where the repair is not immediately visible or obvious. Key Skills The following key skills are required to perform one or more essential functions of this position. Equipment Maintenance, Troubleshooting (Problem Solving), Preventive Maintenance, Technical Drawing, Material Handling Equipment Leadership Expectations An individual must be proficient in each of the competencies listed below to successfully perform the responsibilities of this position Respect the Individual:Embraces differences in people, cultures, ideas, and experiences; creates a workplace where associates feel seen, supported and connected through a culture of belonging; creates opportunities for all associates to thrive and perform; helps to attract the best talent. Respect the Individual:Works as a team; builds strong and trusting relationships; communicates with impact, energy, and positivity to motivate and influence. Respect the Individual:Strengthens the team by helping, developing and mentoring others; recognizes others’ contributions and accomplishments. Act with Integrity:Maintains and promotes the highest standards of integrity, ethics and compliance, models the Walmart values to support and foster our culture; holds oneself and others accountable; supports Walmart’s goal of becoming a regenerative company by making a positive impact for associates, customers, members, and the world around us. Act with Integrity:Acts in a selfless manner and is consistently humble, self-aware, honest, fair, and transparent. Serve our Customers and Members:Delivers results while putting the customer first. Serve our Customers and Members:Makes decisions based reliable information; balances short- and long-term priorities; and considers how own work impacts the team’s ability to deliver on our purpose for all stakeholders. Strive for Excellence:Displays curiosity and a desire to learn; takes calculated risks; and demonstrates courage and resilience. Strive for Excellence:Drives continuous improvements; is open to and uses new technologies? and skills; and supports others through change. Physical Activities The following physical activities are necessary to perform one or more essential functions of this position. Enters and locates information on computer. Moves up and down a ladder. Moves up and down stairs. Grasps, turns, and manipulates objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Visually verifies information, often in small print. Reads information, often in small print. Visually locates merchandise and other objects. Visually inspects equipment. Reaches overhead and below the knees, including bending, twisting, pulling, and stooping. Moves, lifts, carries, and places merchandise and supplies weighing up to 50 pounds without assistance. Apply sideways/upward/downward pressure to tighten and loosen hardware (for example, nuts, bolts). Observe behavior of others (i.e., associates, customers, suppliers). Wear personal protective equipment (PPE) as required, which could include, but not be limited to fall protection, eye protection, hearing protection, respiratory protection, chemical protection and electrical protection such as protective footwear. Operate motor vehicle or other large power equipment. Use approved equipment to step up and access freight and equipment in elevated areas. Use crossovers to access opposite sides of conveyors. Differentiate sounds in order to inspect and maintain equipment, identify potential hazards, or recognize safety alarms. Lift, push, pull, and carry tools, objects or equipment above shoulder level without assistance. Write documents, reports, etc. using a writing instrument (e.g., pencil, pen) or computer. Work Environment Working in the following environment is necessary to perform one or more of the essential functions of this position. May work with substances that require special handling Works in areas requiring exposure to varying temperatures, extreme heat or cold, and/or wet, damp, or drafty conditions. Moves over sloping, uneven, or slippery surfaces. Works at heights. Work indoors for extended periods of time. Move through narrow, enclosed, or elevated spaces. Work outdoors for extended periods of time. Work in areas with high noise levels that may require hearing protection. Work in areas with industrial conditions (e.g., elevated noise levels, strobing lights, electromagnetic (EM) fields). Entry Requirements Minimum Qualifications • 2 years of experience in industrial maintenance working with electrical, electronics, and mechanical equipment (for example, forklifts, conveyors, building equipment, automated equipment) Or Coursework or certification in industrial maintenance, electronics, electrical, mechanical automation, mechatronics or other related areas of study.” Preferred Qualifications • • Associate’s degree or higher degree in related field such as mechatronics, electronics, or industrial maintenance. Active, industry recognized certification such as Certified Reliability and Maintenance Technician (CRMT) or Master Certified Electronics Technician (MCET)

Conviso Inc is hiring Azure Engineer position. This is a 100% REMOTE set-up position & comes with benefits, 401K & some accrued PTO. The Ideal Candidate will implement approved Azure infrastructure, Windows Server 2022 configurations, network segmentation, security tooling integrations, hybrid connectivity, and disaster recovery capabilities in coordination with Infrastructure, Security, Database, Development, ICAM/eAuth, DNS, DMZ, and application stakeholders. Title: Azure Engineer (Entry Level Role) Active Secret Clearance required Remote job – EST Hours Key Responsibilities • Provision and configure Azure subscriptions, resource groups, virtual machines, virtual networks, subnets, route tables, network security controls, and related Azure services., • Provision Windows Server 2022 instances using approved hardened baseline images., • Apply approved operating system patches, security configurations, CIS benchmark requirements, and enterprise configuration standards., • Onboard servers and Azure resources to vulnerability scanning, endpoint protection, compliance monitoring, logging, and Azure security capabilities., • Support the installation and configuration of middleware, runtime dependencies, administrative tools, and supporting services., • Validate certificates, listeners, endpoints, firewall rules, ports, middleware components, DNS resolution, and downstream interfaces., • Support implementation and validation of TLS 1.3 and remediation or removal of deprecated protocols and configurations., • Configure and validate production and non-production network segmentation, including approved hybrid routing and DNS integration., • Support Azure Site Recovery configuration and disaster recovery testing., • Coordinate with existing Infrastructure, Security, Database, and Development specialists to resolve dependencies and implementation issues., • Prepare configuration records, implementation evidence, technical diagrams, runbooks, and operational handoff materials. Required Qualifications • Recommended minimum of four years of experience supporting Microsoft Azure infrastructure in enterprise or regulated environments., • Hands-on experience with Azure subscriptions, virtual networks, subnets, route tables, network security controls, RBAC, Azure Policy, and resource governance., • Experience administering Windows Server environments, preferably Windows Server 2019 or 2022., • Experience with hybrid Azure and on-premises connectivity, DNS, firewall rules, certificates, and secure network paths., • Experience supporting server hardening, vulnerability scanning, endpoint protection, patching, and compliance monitoring., • Ability to troubleshoot infrastructure, middleware, application, and network dependencies across multiple technical teams. Preferred Qualifications • Experience with Azure Site Recovery or comparable disaster recovery technologies., • Experience supporting TLS configuration, encryption in transit, and certificate lifecycle activities., • Experience in federal, public-sector, or other highly regulated environments., • Familiarity with Microsoft Entra ID, Azure SQL Managed Instance, customer-managed keys, and Azure security services., • Azure infrastructure or architecture certification, such as AZ-104 or AZ-305.

About Hai Robotics Hai Robotics is revolutionizing warehouse automation with intelligent robotics systems that deliver true customer value based on a unique combination of scalable standards with customer specific customization. Our mission is to empower fulfillment operations with cutting-edge technology and an obsessive customer focus. Job Summary The CEO of the Americas has a bold vision to transform the robotics industry across the region by rallying the AMER team around a mission rooted in customer obsession—not just robotic functionality. At Hai Robotics, success begins with understanding our customers’ challenges and delivering innovative automation solutions that drive measurable impact. HAI Robotics is seeking a top Robotics Engineer skilled in warehouse automation who understands the agile mindset, various systems (AGV, ACR, AMR), and DevOps philosophies. We're looking for a technical expert for one of the most promising robotic companies in the world; if you possess that rare mix of depth in Hands-on Implementation, Testing, and Systems Engineering, then we are waiting for your application. Hai Robotics operates in a fast-paced environment where we “Work Hard, Have Fun, Make History.” In this role, you will collaborate closely with cross-functional teams, build relationships with customers and industry partners, and help position Hai Robotics as a trusted leader in warehouse automation innovation. You will join a world-class team in an environment that combines the energy of a start-up with the scale and ambition of a global robotics leader. This is an opportunity to play a meaningful role in expanding Hai Robotics’ market presence in the United States and globally, working alongside passionate professionals who believe that innovation, partnership, and exceptional service are key to customer success. Essential Duties and Responsibilities System Deployment & Commissioning • Deploy and commission autonomous mobile robots (AMRs) and support automation systems at customer facilities., • Install, configure, and validate servers, networking infrastructure, and software platforms required for warehouse automation systems., • Integrate robotic hardware with WES, WCS, WMS, PLCs, conveyors, workstations, and third-party equipment., • Configure software parameters for robots, charging systems, storage racks, workstations, sensors, and other automation equipment., • Perform robot calibration, including localization, navigation, vision systems, sensors, lifting mechanisms, and workstation alignment. Testing & Technical Validation • Execute functional, integration, and system-level testing to validate overall system performance and stability., • Develop and execute comprehensive test plans, test procedures, and validation protocols to ensure all hardware and software components meet performance and quality standards., • Conduct stress, endurance, and production-simulation testing to validate system robustness, identify performance bottlenecks, and ensure system stability and reliability. Monitor key performance metrics, including Mean Time Between Failures (MTBF), and drive continuous improvements to maximize system uptime before customer Go-Live. Troubleshooting & Technical Support • Troubleshoot complex electromechanical, networking, hardware, and software issues during installation, testing, and commissioning., • Provide on-site and remote technical support throughout commissioning and stabilization, ensuring successful customer acceptance and Go-Live., • Continue supporting the customer after implementation by rapidly diagnosing and resolving technical issues until the system reaches stable production operation Documentation & Reporting • Develop comprehensive testing procedures, commissioning reports, issue logs, and technical documentation to ensure implementation quality and traceability. Project Coordination & Stakeholder Management • Coordinate and supervise contractors, vendors, and installation partners to ensure work is completed according to project specifications, quality standards, and safety requirements., • Communicate project status, technical risks, testing results, implementation progress, and issue resolution effectively with customers, project managers, software teams, hardware teams, and other internal stakeholders. Cross-Functional Collaboration • Work closely with software, mechanical, electrical, and controls engineering teams to resolve technical issues, verify fixes through regression testing, and optimize system performance. System Optimization & Reliability Engineering • Support system optimization, performance tuning, and reliability improvements prior to customer acceptance. Customer Training & Knowledge Transfer • Train customer operations and maintenance personnel on system functionality and basic troubleshooting procedures. Qualifications Education • Bachelors in Robotics, Mechatronics, Electrical/Mechanical Engineering, or equivalent experience that encompasses the knowledge gained through a degree Required Experience • Entry-level experience in AGV ACR or AMR solution implementation, • Knowledge of WMS integration and software integration., • Analytical mind and strong troubleshooting and problem-solving ability, • Some field experience in warehouse automation, material handling equipment, and warehouse operations is preferred., • Familiar with Linux/UNIX, SQL, and the ability to write scripts to automate tasks., • Basic knowledge of VPNs, firewalls, and routers, • Analytical mind and outstanding communication skills, • Speaking Chinese is an advantage but not mandatory, • Basic understanding of DevOps philosophies. *Candidates must be authorized to work in the United States/Canada and must provide proof of eligibility upon hire in accordance with federal regulations. Work Environment and Physical Requirements • Willingness to travel (80%+) *This job description does not create a contract of employment, nor does it alter the at-will nature of employment. The company reserves the right to modify, interpret, or apply this job description. *Hai Robotics U.S.A. Inc provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, or veteran status in accordance with applicable federal, state, and local laws.

Senior Motion Graphics Artist – Remote, U.S.-Based | 6 - 8 Week Contract Location: Remote within the United States Schedule: Full-time availability during West Coast business hours (Pacific Time) Duration: 6–8 weeks, with potential to discuss a full-time staff position toward the end of the contract About Speed Collective Speed Collective is a full-service post-production company based near Denver, Colorado, partnering with agencies, production companies, brands, and filmmakers. Our work spans creative editorial, color grading, motion graphics, visual effects, and finishing for commercial, film, broadcast, and digital projects. We’re a small, collaborative team that values thoughtful design, technical problem-solving, and high-quality visual storytelling. About the Role We’re seeking a senior-level Motion Graphics Artist who can take ownership of projects from creative brief through final delivery. This position requires substantial professional experience, strong creative judgment, and the ability to produce polished, client-ready work independently with minimal oversight. A significant part of the role involves screen UI cleanup and animation for software product demos. You should be comfortable transforming screen recordings and interface designs into clear, engaging demonstrations while maintaining accuracy and brand consistency. Between client assignments, you’ll contribute to internal creative projects and explore emerging tools and technologies that improve our workflows and expand our creative capabilities. This is a 6–8 week contract requiring full-time availability. A potential transition to a full-time staff position can be discussed near the end of the engagement, based on mutual fit and business needs. Applicants must be based in the United States and available to work Pacific Time business hours. Responsibilities • Lead the design and animation of motion graphics, branded sequences, titles, and other visual content from concept through delivery., • Clean up and refine screen recordings, including cursor removal and replacement, smoother cursor movement, timing adjustments, and removal of unwanted interface elements., • Build and animate UI sequences from screen captures, Figma files, and supplied assets, using highlights, callouts, zooms, and transitions to clearly communicate product features., • Develop visual concepts, style frames, and storyboards from creative briefs., • Collaborate with editors, colorists, and VFX artists to integrate motion design into finished projects., • Interpret feedback, solve creative and technical challenges, and maintain consistency across deliverables., • Deliver organized project files and production-ready assets on schedule., • Support internal projects between client assignments, including marketing content, creative development, and workflow improvements., • Learn, evaluate, and adapt to emerging technologies, including AI-assisted tools where appropriate. Qualifications • Substantial professional motion design experience in an agency, studio, post-production company, or established freelance practice., • A senior-level portfolio demonstrating polished commercial work, strong design fundamentals, and ownership of projects from concept through completion., • Demonstrated experience with software product demos, screen UI cleanup, and interface animation, supported by relevant work samples., • Advanced proficiency in Adobe After Effects and strong working knowledge of Photoshop and Illustrator., • Familiarity with Figma and translating supplied UI designs into animation., • Excellent command of timing, typography, composition, color, and visual storytelling., • Strong attention to detail when working with interface layouts, small text, cursor movement, and brand guidelines., • Ability to manage multiple priorities, communicate proactively, and deliver client-ready work with minimal supervision., • Willingness to contribute to internal projects and learn new tools and techniques., • U.S.-based, with full-time availability during Pacific Time business hours for the duration of the contract., • Cinema 4D or comparable 3D experience is a plus. This is a senior-level opportunity. Entry-level portfolios and coursework alone will not meet the experience requirements. To Apply • Please share your resume, portfolio or reel, location, availability, and contract rate. Include relevant product demo or UI animation examples, briefly describe your contribution to each, and confirm your availability to work Pacific Time business hours.

SECCA Search Group is an executive search firm focused on delivering highly targeted recruiting solutions across specialized and competitive markets. Our approach is relationship-driven and built around a deep understanding of our clients, their businesses, and the talent required to support their growth. We combine focused market research, direct candidate outreach, and long-term relationship development to execute searches with urgency and accountability. As SECCA expands into the data center and critical infrastructure markets, we are seeking an experienced recruiter to help build and grow this specialized practice. About the Role The Executive Recruiter – Data Centers will develop and manage a full-desk recruiting practice focused on the professionals supporting data center construction, development, operations, electrical systems, and power infrastructure. This individual will be responsible for developing client relationships, generating search opportunities, and managing assignments from initial intake through successful placement. The recruiter will work directly with hiring managers, senior leaders, and specialized candidates across a rapidly growing and highly competitive market. This is not an entry-level opportunity or a position for someone looking to transition into data center recruiting without relevant industry experience. The successful candidate will already understand the companies, positions, and talent profiles within data centers, industrial construction, or electrical infrastructure and will be able to speak credibly with both clients and candidates from the beginning. The role offers significant autonomy, direct access to company leadership, and the opportunity to help shape an emerging practice area within an established executive search firm. This is a fully remote position open to candidates located in the United States. Responsibilities Full-Desk Recruiting • Manage the complete recruiting lifecycle, including business development, client intake, sourcing, candidate qualification, interview coordination, offer negotiation, and placement. Business Development • Build relationships with data center developers, owners, operators, contractors, engineering firms, electrical contractors, equipment providers, and other organizations supporting critical infrastructure. Practice Development • Help establish and grow SECCA’s presence within the data center market by identifying target clients, specialized talent segments, and new search opportunities. Search Execution • Lead searches for technical, operational, construction, engineering, and leadership-level professionals across data centers and related infrastructure. Candidate Development • Identify, engage, and maintain long-term relationships with passive candidates in specialized and competitive talent markets. Client Management • Partner directly with hiring managers and senior leaders to understand business needs, define position requirements, develop search strategies, and provide relevant market feedback. Qualifications • 3+ years of full-cycle recruiting experience within an agency, staffing, or executive search environment., • Direct recruiting experience in at least one of the following areas: data centers, mission-critical facilities, industrial construction, electrical construction, or power infrastructure., • Proven ability to develop client relationships and generate new business., • Experience independently managing searches from initial business development through successful placement., • Strong track record of sourcing and engaging specialized passive candidates., • Working knowledge of the companies, positions, and talent profiles within the recruiter’s area of specialization., • Experience communicating directly with hiring managers, senior leaders, and executive-level candidates., • Experience using LinkedIn Recruiter, ATS platforms, and other recruiting and sourcing tools., • Strong communication, organization, accountability, and follow-through., • Ability to work independently and remain productive in a fully remote environment. Pay range and compensation package • Competitive base salary plus commission., • Healthcare and 401(k) benefits., • Direct access to company leadership., • Established recruiting systems, tools, and operational support., • Opportunity to build and grow a specialized recruiting practice within a rapidly expanding market. Equal Opportunity Statement SECCA Search Group is committed to providing equal employment opportunities to all employees and applicants and to creating an inclusive environment for all members of our team. We welcome applicants from diverse backgrounds and do not discriminate on the basis of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Midwest / Great Lakes Territory Sales Manager (Metal Roofing, Snow Retention, Solar Mounting) 📍 Location: Midwest, Great Lakes Region (MI, WI, IL, IN, OH, KY ) (Remote + Travel) About Us S-5! Is the industry leader in rooftop attachment solutions, delivering innovative, engineered systems for snow retention, solar and safety for the metal and single-ply roof categories. Our products are trusted by contractors, architects, and engineers across North America who depend on durability, safety, and reliability in demanding conditions. With a reputation built on quality, innovation, and industry leadership, S-5! continues to set the standard for rooftop attachment solutions. About the Role As a Territory Sales Manager (TSM) at S-5!, you’ll play a key role in expanding S-5!’s presence across the Great Lakes and Mid-West regions. This is a high-impact, relationship-driven role where you’ll be working directly with distributors, contractors, and installers to grow sales, educate the market, and drive adoption of our solutions. This isn’t an entry-level role, we’re looking for someone who already knows the Great Lakes and Mid West markets, understands metal and/or single-ply roofing, and ideally has experience selling snow retention, solar attachments, and other engineered rooftop systems. What You’ll Be Doing • Relationship & Account Management: Serve as the primary point of contact for distributors and contractors across your territory, • Develop & Close Sales: Convert, upsell, and grow existing accounts while gaining market share by developing new business with contractors and distributors, • Business Development: Identify new distribution channels, vertical markets and end-users to expand reach, • Lead Management: Track project opportunities, follow up on leads, and build relationships with key decision-makers, • Product Expertise: Provide technical support, product education, and training across multiple audiences, • Customer Needs Analysis: Identify product gaps and provide feedback to R&D, • Marketing Collaboration: Partner with marketing to execute campaigns and initiatives, • Industry Engagement: Attend trade shows, events, and industry associations to stay connected and visible, • Pricing Strategy: Work with distributors to stay competitive and win business, • Team Collaboration: Share insights and best practices across teams, • Additional Responsibilities: Support regional initiatives as needed, • Strategic Planning: Develop and execute territory sales strategies to drive growth What We’re Looking For • Demonstrates a growth-oriented mindset and a collaborative approach to increase territory performance, • Proven experience in metal roofing sales (required), • Experience with snow retention systems (strongly preferred), • Established book of business in the Midwest-Great Lakes Region, • Strong relationships with contractors, distributors, architects, engineers, and installers, • Deep understanding of roofing systems and field application, • Ability to work independently and manage a multi-state territory, • Willingness to travel, including air travel (50–75%+)

Outside Sales & Business Development Manager — Power Generation / Turbine Outage Services Outage Support Resource (OSR) | Full-Time | Field-based, regular travel required 📌 Recruiters/agencies: please don't reach out — we're hiring directly and won't be working through agencies for this role. This is NOT an entry-level sales role. We're looking for someone who already lives in this industry — you know the turbine and outage business, you have a real, verifiable network of plant and industry contacts, and you've actually turned those relationships into awarded work and revenue before. If that's not you yet, this isn't the right fit, and that's okay. What you'll do • Grow OSR's presence with existing customers and open new accounts across the power generation / turbine services / industrial field-service space, • Use your existing relationships to surface opportunities before they hit formal bid — with Plant Managers, Outage Managers, Maintenance/Ops Managers, Project Managers, and Procurement, • Track scheduled and forced outages, inspections, repairs, overhauls, and other field-service events across your territory, • Own opportunities start to finish: first contact → RFQ/RFP → proposal → negotiation → award → handoff to Operations, • Get in front of people — plant visits, trade shows, industry events, • Keep the CRM clean and the pipeline honest, • Work closely with OSR leadership and Ops to make sure what you sell is what we can actually deliver What you need (non-negotiable) • 2 to 5 years of direct sales or business development experience in power generation, turbine services, outage services, or closely related industrial field-service work, • An established, verifiable network in this space — not a LinkedIn contact list, actual relationships you can activate, • A track record of converting relationships into POs and revenue, not just managing inbound bids, • Working knowledge of gas turbines, steam turbines, generators, and rotating equipment, • Real understanding of outage planning cycles and how this work actually gets awarded, • Comfort talking credibly to both plant/technical people and procurement/executive contacts Nice to have • Experience across multiple plants, customers, or territories, • Deep knowledge of major turbine platforms and the players around them, • Background selling technical field labor, repair, maintenance, or outage-related services, • CRM/pipeline tool experience How we'll measure success New qualified opportunities generated, growth in existing accounts, proposals and bids, awarded work, revenue and margin on business you originate, repeat customers, and a pipeline that's actually accurate. About OSR Outage Support Resource (OSR) was founded in 2022 and is based in West Columbia, TX, providing inspection, maintenance, and overhaul services for large-frame gas and steam turbines, generators, and balance-of-plant equipment across power generation, LNG, and petrochemical facilities nationwide. We're not a startup figuring things out — our crews are fully staffed, fully tooled, and ready for deployment. Our teams of millwrights and technical field advisors mobilize fast, and our leadership — co-founded by Cody Pate (President/Director of Operations) and Esmy Pate (SVP, Admin & Finance) — stays close to the field, not buried behind a corporate layer. If it turns, burns, or leaks, we are The Solution. To apply Please apply only if you meet the 2 to 5 years industry-specific experience requirement above. Email your resume to: recruiter [at] osresource [dot] net In your email, briefly tell us: • Which segment(s) of this industry your network is in (e.g., IPPs, utilities, OEMs, turbine service providers), • One example of a relationship you converted into awarded work *Applications without this won't be prioritized — this filter is here so we can respond quickly to the right candidates.

Job Description Overview MCI is one of the fastest-growing tech-enabled business services companies in the USA, with a strong call center footprint and operations that extend across multiple countries. We deliver Customer Experience (CX), Business Process Outsourcing (BPO), and Anything-as-a-Service (XaaS) cloud technology solutions across a wide range of industries, including healthcare, retail, government, education, telecom, technology e-commerce, and financial services. Our contact centers are powered by both on-site and remote agents, leveraging advanced technologies to enhance customer journeys, drive scalability and reduce costs. At MCI we are committed to fostering an environment where professionals can build meaningful careers, access continuous learning and development opportunities and contribute to the success of a globally expanding, industry-leading organization. We’re hiring Customer Service Representatives to join our inbound contact center team. In this role, you’ll assist callers with inquiries, troubleshoot disputes, process payments, and provide accurate information all while delivering a professional and empathetic customer experience. This is an entry-level position offering paid training and growth opportunities. While prior contact center experience is not required, experience in customer service, tech support, inside sales, or back-office support is a plus. If you're reliable, a strong communicator, and eager to learn, we encourage you to apply! To be considered for this role, you must complete a full application on our company careers page, including all screening questions and a brief pre-employment test. Responsibilities Key Responsibilities: • Handle inbound and outbound contacts in a courteous, timely, and professional manner., • Listen actively to customers, understand their needs, and resolve issues effectively., • Research systems to locate missing information and coordinate with other departments as needed., • Follow client-specific processes and perform all tasks with professionalism., • Use internal systems and tools to manage customer accounts and process claims., • Accurately document customer interactions and outcomes in appropriate systems., • Follow required scripts, policies, and procedures to ensure consistency and compliance., • Use training and knowledge base resources to answer customer questions accurately., • Maintain confidentiality and comply with data protection requirements., • Escalate unresolved or complex issues to the appropriate team or supervisor., • Strive for first-call resolution through effective problem-solving and call handling., • Attend meetings and training sessions to stay current on updates to systems and processes., • Adhere to all attendance and scheduling requirements. Qualifications WONDER IF YOU ARE A GOOD FIT FOR THIS POSITION? All positive, and driven applicants are encouraged to apply. The Ideal candidates for this position are highly motivated and dedicated and should possess the below qualities: • Must be 18 years or older, • High school diploma or equivalent, • Experience with data entry and computer-based systems, • Fluent in spoken and written English, • Wired high-speed internet connection (Download speed of 20Mbps+), • Strong organizational, written, and verbal communication skills, • Typing speed of 20+ WPM, • Ability to work scheduled shifts, including during training, • Basic proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint), • Familiarity with Windows PC applications and ability to learn new systems, • Highly reliable with consistent attendance and punctuality, • Strong problem-solving, conflict resolution, and negotiation skills, • Customer service-oriented: empathetic, responsive, patient, and conscientious, • Ability to multi-task, self-manage, and stay focused, • Comfortable working in a fast-paced, dynamic environment, • Excellent interpersonal skills and ability to build rapport with customers and team members Preferred (Not Required) • 1+ year of experience in customer service, technical support, inside sales, back-office, chat, or administrative support in a contact center, • Previous work-from-home experience, • Experience in state or federal programs

We are looking for full-time call center representatives to support inbound and outbound customer service and sales projects for a wide variety of clients. In this role, you will identify customers' needs, research every issue, provide solutions, and upsell customers on new products and services. There are a wide variety of project openings on government programs as well as some of the most recognizable brands in the world. Candidates should be highly reliable, have excellent communication skills, and be willing to learn on the job. Schedules vary by site and project; however, we can usually find something that works for everyone. This is an on-site, entry-level position. While prior contact center experience isn't required, experience in customer service, technical support, inside sales, or back-office support in a contact center environment is a plus. To be considered for this position, you must complete a full application on our company careers page, including screening questions and a brief pre-employment test. In this role, you handle inbound and outbound calls, helping to support customer service, technical support, and customer sales interactions. It requires you to interact with hundreds of customers each week across the country to resolve support issues, sell new products and services, and ensure a best-in-class customer experience. In addition to providing exceptional service, you will need to be a confident, fully engaged team player dedicated to bringing a positive and enthusiastic outlook to work each day. Essential Duties • Handle inbound and outbound contacts in a courteous, timely, and professional manner, • Ensure first call resolution through problems solving and effective call handling, • Research systems to find missing information as applicable; coordinate with other departments to resolve issues when needed, • Accurately document and process customer claims in appropriate systems, • Lead fact-finding discussions to determine the best options for the customer, • Utilize knowledge base and training to accurately answer customer questions while following all required scripts, policies, and procedures, • Comply with requirements surrounding confidential information and personal information, • Escalate customer issues to the appropriate staff and managerial for resolution as needed, • Attend meetings and training and review all new training material to stay up-to-date on changes to program knowledge, systems, and processes, • Adhere to all attendance and work schedule requirements We provide all new employees with world-class training, so all positive, driven, and confident applicants are encouraged to apply. This position relies on building relationships and turning the knowledge you gain in training into customer wins. Ideal candidates for this position are highly motivated, energetic, and dedicated. Qualifications • Must be 18 years of age or older, • High school diploma or equivalent, • Excellent organizational, written, and oral communication skills, • The ability to type swiftly and accurately (20+ words a minute), • Basic knowledge of Microsoft Office Suite (Excel, PowerPoint, Word, Outlook), • Basic understanding of Windows operating system, • Highly reliable with the ability to maintain regular attendance and punctuality, • The ability to evaluate, troubleshoot, and follow-up on customer issues, • An aptitude for conflict resolution, problem-solving, and negotiation, • Must be customer service oriented (empathetic, responsive, patient, and conscientious), • Ability to multi-task, stay focused, and self-manage, • Strong team orientation and customer focus, • The ability to thrive in a fast-paced environment where change and ambiguity prevalent, • Excellent interpersonal skills and the ability to build relationships with your team and customers Preferred (Not Required) • One (1) year of experience in customer service, technical support, inside sales, back-office, chat, or administrative support in a contact center environment, • State or Federal work experience

We are currently seeking a self-motivated, results oriented Service Experience Advisor. It is Micro Center's core promise to take care of our associates and customers which has led to our success over the last 40+ years! The Service Experience Advisor is the customer's first point of contact for technical service at Micro Center. This front-line role blends basic technical understanding with strong interpersonal skills to guide customers through service intake, recommend actions for appropriate solutions, and ensuring confidence in the repair process. Located at the Knowledge Bar, the Service Experience Advisor focuses on delivering a high-touch experience while helping customers understand the value of services like PriorityCare+, Data Backup, ESET, and other personalized solutions. This is a great entry-level opportunity for individuals with experience in sales, hospitality, or customer service who are passionate about technology and customers and are eager to learn. With performance-based pay and commission opportunities, this role offers substantial earning potential for those who consistently deliver great service. Major Responsibilities: • Serve as the trusted point of contact for walk-in or scheduled customers at the Knowledge Bar, • Listen actively to customer concerns and guide them through appropriate service solutions and offerings, • Recommend value-added services such as PriorityCare+, Data Backup, ESET, and other products and services in a consultative and helpful manner, • Clearly communicate estimated pricing, timelines, and expectations at time of check-in, • Assist in basic troubleshooting and accurately route work orders to the appropriate service queues, • Process service and point of sale transactions accurately and completely, • Maintain minimum attachment rates and productivity standards, • Stay informed of current promotions and attachment opportunities, • Provide timely, professional updates to customers regarding service status, • Obtain required certifications as directed by management, • Keep a clean, organized, and customer-ready workspace Education & Experience: • High School diploma or equivalent, • No prior technical experience required, • Strong preference given to candidates with customer-facing commissioned sales, hospitality, and/or retail experience, • Demonstrated ability to build rapport, earn trust, and explain services or solutions clearly and professionally Micro Center Offers Exceptional Benefits: • Medical, Dental and Vision Benefits Coverage for Regular Full-Time Associates, • Employee Discount that includes a Friends & Family Discount Program, • Tuition Reimbursement & Education Discounts, • Paid Time Off for Regular Associates, • 401K Plan with Company Match, • Esteemed Vendor & Company Job Training, • Career Advancement Opportunities Our Growth Opportunities: At Micro Center, we empower our employees to set their sights high and blaze their own trails. This is a place where your future success and growth are truly a result of your own efforts and achievements. Our teams are made up of motivated individuals who work hard to advance their careers. Join our team and see how hard work, loyalty, competitive spirit and unwavering commitment to the customer can take you and your career to new places. Micro Center is an Equal Opportunity Employer. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

As an intern at Forvis Mazars, you will gain valuable experience that may help you decide whether you want to start your career in audit or tax, or even whether public accounting is right for you. You will work on client engagements like those assigned to our entry-level associates, gaining exposure to a variety of industries and testing out your technical know-how. You will work alongside our senior staff and management personnel, learning from their experience as you develop your skillset. Depending on local office needs, internships are available in assurance, tax, or a combination of the two and can be part-time or full-time. Generally, winter semester internships run from early-January through April 15th, and summer internships can typically run from early-June through mid-August. How you will contribute: • Completing audit testing on financial statement accounts such as cash, accounts payable, or fixed assets, • Working with client personnel to reconcile account differences and analyze financial data, • Helping to draft management letter comments and the audit report, • Participating in client meetings alongside Forvis Mazars partners and managers We are looking for people who have Forward Vision and: • Solid technical accounting knowledge, • Effective time management, • Strong oral and written communication skills, • Strong computer skills preferred, including Microsoft Office suite, • Ability to work well with a team as well as independently, • Problem-solving attitude, • Willingness to take initiative, • Close attention to detail, • Ability to work under pressure and against deadlines., • Intern candidates must be working toward CPA Exam eligibility, • Satisfactory academic performance in major-related coursework is expected, • Interns must maintain a minimum cumulative overall GPA of 3.0, • Must have reliable transportation to and from your assigned office and be able to attend off-site meetings and events in person Applicants for positions with Forvis Mazars must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. About Forvis Mazars, LLP Forvis Mazars, LLP is an independent member of Forvis Mazars Global, a leading global professional services network. Ranked among the largest public accounting firms in the United States, our 7,000+ team members deliver assurance, tax, and consulting services to clients in all 50 states and internationally. With a legacy spanning more than 100 years, we're building something different. We are guided by a shared promise: Together, we create extraordinary experiences. That means delivering an Unmatched Client Experience while creating a workplace where relationships matter, learning fuels growth, and every person feels valued and supported to thrive. What We Offer Our robust total rewards program and flexible work environment reflect our commitment to people, careers, and well-being-empowering our team to grow and thrive while delivering exceptional service. Legal Notice Forvis Mazars, LLP is an equal opportunity/affirmative action employer in accordance with applicable law. Employment selection and related decisions are made without regard to age, race, color, sex, sexual orientation, national origin, religion, genetic information, disability, protected veteran status, gender identity, or other protected classifications. It is Forvis Mazars, LLP standard policy not to accept unsolicited referrals or resumes from any source other than directly from candidates. Forvis Mazars, LLP expressly reserves the right not to consider any unsolicited referrals, resumes or CVs from vendors including and without limitation, search firms, staffing agencies, fee-based referral services, and recruiting agencies. Forvis Mazars, LLP further reserves the right not to pay a fee to a recruiter or recruiting agency unless such recruiter or recruiting agency has a signed vendor agreement with Forvis Mazars, LLP. Any resume(s) or CV(s) submitted to anyone working for Forvis Mazars, LLP, or submitted to a Forvis Mazars, LLP general email, without having a Forvis Mazars, LLP vendor agreement in place, will be considered the property of Forvis Mazars, LLP.

Under general supervision, perform advanced-level diagnosis, maintenance, and repair of school buses and other district fleet vehicles. Ensure vehicles are maintained in a safe, reliable, and serviceable condition in accordance with district procedures and applicable federal and state requirements. Provide technical guidance to other mechanics and operate school buses or district vehicles as needed. Perform advanced diagnostics, maintenance, and repairs on school buses and light-, medium-, and heavy-duty district vehicles. Diagnose, repair, and install components on diesel, gasoline, propane, hybrid, and electric-powered vehicles. Inspect, diagnose, and repair engines, fuel systems, electrical systems, charging systems, and electronic control systems. Diagnose and repair transmissions, drivetrains, differentials, steering systems, suspensions, axles, and related components. Inspect, service, and repair air, hydraulic, and anti-lock braking systems in accordance with applicable safety requirements. Diagnose and repair exhaust, emissions, and after-treatment systems, including diesel particulate filters and selective catalytic reduction systems. Service and repair vehicle heating, ventilation, air-conditioning, and refrigeration systems. Perform preventive maintenance, safety inspections, and required repairs according to established schedules and manufacturer specifications. Use diagnostic software, scan tools, electronic testing equipment, technical manuals, and schematics to identify and resolve mechanical and electrical problems. Conduct road tests and operational checks to verify vehicle performance and confirm that repairs have been completed safely and correctly. Respond to vehicle breakdowns, accidents, emergencies, and after-hours service calls; perform roadside repairs or coordinate vehicle recovery when necessary. Complete work orders, inspection forms, parts requests, maintenance records, and other documentation accurately and within established timelines. Maintain tools, equipment, assigned work areas, and service vehicles in a clean, safe, and serviceable condition. Provide technical assistance and on-the-job guidance to entry- and journey-level mechanics; assist with complex repairs and quality-control inspections. Operate school buses and other district vehicles as required and perform other duties assigned by the Fleet Maintenance Supervisor or Fleet Director. Ability to diagnose, troubleshoot, and effectively perform repairs for all vehicles. This will include the removal/replacement of engines, fuel systems, electrical, and diagnose transmissions (RR). After treatment systems, including EGR Valves, EGR Coolers, SCR, DPF, DOC, and Injector Diagnostics. Turbo Chargers-Cylinder Cutout Test-Leak down test-High Pressure pump test-ICP & IPR. Ability to diagnose minor mechanical problems and perform repairs without supervision. Ability to operate tools and equipment involved in vehicle repair. Ability to lift heavy equipment and vehicle parts. Acceptable communications, public relations, and interpersonal skills. Ability to operate a school bus. Ability to operate a tow truck. Ability to work shifts as needed. Ability to use time wisely to ensure efficient and effective operations. Ability to pass an alcohol and drug test Accredited High School Diploma or equivalent (U.S.A. equivalency) required. Valid commercial driver's license (CDL) required. Passenger and School Bus endorsements must be obtained within 90 days of hire. Minimum of two ASE Automotive Certifications, School Bus S1-S7, or obtain ASE certifications required. Valid Texas Driver's License and a record that meets the District's standard required. 3-5 years of direct experience with Auto/truck maintenance and repair experience required. Physical Demands Field / Physical Labor: While performing the duties of this job, the employee is regularly required to stand, move throughout the room and or facility, communicate verbally and electronically, use hands to finger, handle or feel objects, tools, or controls, ability to work overhead, reach with hands and arms, stoop, kneel, crouch, and or crawl; climb; balance, and drive. Employee may be required to work on knees from time to time. While performing the duties of this job, the employee is regularly required to lift or exert force of up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust and focus. May be required to work off scaffolding and a minimum of 40-foot ladder. May be required to operate heavy equipment. Work Environment Field / Physical Labor: The noise level in the work environment is usually moderate to high. This position involves work related to operating vehicles and tools as well as other equipment as needed. May be required to perform manual labor during inclement weather. Occasionally exposed to environmental conditions such as moving mechanical parts, fumes, air borne particles, biohazardous materials, etc. Must be able to safely tolerate the elements as required for the position. May be required to perform duties in proximity of children. Operation Services 5151 SAMUEL BLVD SUITE 100 Dallas 75228 Fleet Specialist III Full-time Minimum Salary: 30.99 Median Salary: 37.79 Job Posting: Oct 6, 2026

We are the leading provider of professional services to the middle market globally, our purpose is to instill confidence in a world of change, empowering our clients and people to realize their full potential. Our exceptional people are the key to our unrivaled, culture and talent experience and our ability to be compelling to our clients. You'll find an environment that inspires and empowers you to thrive both personally and professionally. There's no one like you and that's why there's nowhere like RSM. We are seeking a Tax Senior Associate for our Real Estate group. We serve a broad array of real estate owners, developers, and investors including public and private companies, homebuilders, real estate opportunity funds, hotel companies, private equity firms, REITs (Real Estate Investment Trusts), and brokerage companies. Our people work on key client issues in domestic federal taxation using AI and cutting-edge technology, with a focus on implementing tax strategies that align with the client's business objectives. At RSM, Tax Senior Associates are responsible for the following job duties which are focused around three core concepts: (Technical & Quality Expertise, People & Talent Management, and Client Service/Business Development): • Preparing complex tax returns, • Detailed review and analysis of tax returns, • Interact directly with clients handling questions, planning, concerns, etc., • Performing, documenting, and summarizing research and conclusions regarding specific tax issues, • Develop, motivate, and train staff level and intern team members, • Remain up-to-date on current tax practices and changes in tax law, • Some travel may be required Basic Qualifications: • BA/BS Degree preferably in Accounting or related field of study, • Must be eligible to sit for the CPA exam or a licensed JD, • Minimum of 2 years of experience in a public accounting environment, • Ability to work closely with clients to answer questions or to collect necessary information for tax service requirements, • Experience preparing and reviewing returns, • Effective verbal and written communication skills Preferred Qualifications: • Masters of Accounting, • CPA, JD, LLM, or EA, • Experience with a national or large regional accounting firm, • Working knowledge of tax code and technical aspects of tax preparation and compliance, • Strong technical skills in accounting and tax preparation, review experience a plus, • Experience in dealing with international tax matters a plus At RSM, we offer a competitive benefits and compensation package for all our people. We offer flexibility in your schedule, empowering you to balance life's demands, while also maintaining your ability to serve clients. Learn more about our total rewards at https://rsmus.com/careers/working-at-rsm/benefits. All applicants will receive consideration for employment as RSM does not tolerate discrimination and/or harassment based on race; color; creed; sincerely held religious beliefs, practices or observances; sex (including pregnancy or disabilities related to nursing); gender; sexual orientation; HIV Status; national origin; ancestry; familial or marital status; age; physical or mental disability; citizenship; political affiliation; medical condition (including family and medical leave); domestic violence victim status; past, current or prospective service in the US uniformed service; US Military/Veteran status; pre-disposing genetic characteristics or any other characteristic protected under applicable federal, state or local law. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process and/or employment/partnership. RSM is committed to providing equal opportunity and reasonable accommodation for people with disabilities. If you require a reasonable accommodation to complete an application, interview, or otherwise participate in the recruiting process, please call us at 800-274-3978 or send us an email at careers@rsmus.com. RSM does not intend to hire entry level candidates who will require sponsorship now OR in the future (i.e. F-1 visa holders). If you are a recent U.S. college / university graduate possessing 1-2 years of progressive and relevant work experience in a same or similar role to the one for which you are applying, excluding internships, you may be eligible for hire as an experienced associate. RSM will consider for employment qualified applicants with arrest or conviction records. For those living in California or applying to a position in California, please click here for additional information. At RSM, an employee's pay at any point in their career is intended to reflect their experiences, performance, and skills for their current role. The salary range (or starting rate for interns and associates) for this role represents numerous factors considered in the hiring decisions including, but not limited to, education, skills, work experience, certifications, location, etc. As such, pay for the successful candidate(s) could fall anywhere within the stated range. Compensation Range: $67,900 - $128,700 Individuals selected for this role will be eligible for a discretionary bonus based on firm and individual performance.

MCI is one of the fastest-growing tech-enabled business services companies in the USA, with a strong call center footprint and operations that extend across multiple countries. We deliver Customer Experience (CX), Business Process Outsourcing (BPO), and Anything-as-a-Service (XaaS) cloud technology solutions across a wide range of industries, including healthcare, retail, government, education, telecom, technology e-commerce, and financial services. Our contact centers are powered by both on-site and remote agents, leveraging advanced technologies to enhance customer journeys, drive scalability and reduce costs. At MCI we are committed to fostering an environment where professionals can build meaningful careers, access continuous learning and development opportunities and contribute to the success of a globally expanding, industry-leading organization. We're hiring Customer Service Representatives to join our inbound contact center team. In this role, you'll assist callers with inquiries, troubleshoot disputes, process payments, and provide accurate information all while delivering a professional and empathetic customer experience. This is an entry-level position offering paid training and growth opportunities. While prior contact center experience is not required, experience in customer service, tech support, inside sales, or back-office support is a plus. If you're reliable, a strong communicator, and eager to learn, we encourage you to apply! To be considered for this role, you must complete a full application on our company careers page, including all screening questions and a brief pre-employment test. Key Responsibilities: • Handle inbound and outbound contacts in a courteous, timely, and professional manner., • Listen actively to customers, understand their needs, and resolve issues effectively., • Research systems to locate missing information and coordinate with other departments as needed., • Follow client-specific processes and perform all tasks with professionalism., • Use internal systems and tools to manage customer accounts and process claims., • Accurately document customer interactions and outcomes in appropriate systems., • Follow required scripts, policies, and procedures to ensure consistency and compliance., • Use training and knowledge base resources to answer customer questions accurately., • Maintain confidentiality and comply with data protection requirements., • Escalate unresolved or complex issues to the appropriate team or supervisor., • Strive for first-call resolution through effective problem-solving and call handling., • Attend meetings and training sessions to stay current on updates to systems and processes., • Adhere to all attendance and scheduling requirements. Wonder if you are a good fit for this position? All positive, and driven applicants are encouraged to apply. The ideal candidates for this position are highly motivated and dedicated and should possess the below qualities: • Must be 18 years or older, • High school diploma or equivalent, • Experience with data entry and computer-based systems, • Fluent in spoken and written English, • Wired high-speed internet connection (Download speed of 20Mbps+), • Strong organizational, written, and verbal communication skills, • Typing speed of 20+ WPM, • Ability to work scheduled shifts, including during training, • Basic proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint), • Familiarity with Windows PC applications and ability to learn new systems, • Highly reliable with consistent attendance and punctuality, • Strong problem-solving, conflict resolution, and negotiation skills, • Customer service-oriented: empathetic, responsive, patient, and conscientious, • Ability to multi-task, self-manage, and stay focused, • Comfortable working in a fast-paced, dynamic environment, • Excellent interpersonal skills and ability to build rapport with customers and team members Preferred (Not Required) • 1+ year of experience in customer service, technical support, inside sales, back-office, chat, or administrative support in a contact center, • Previous work-from-home experience, • Experience in state or federal programs Want an employer that values your contribution? At MCI, we believe that your hard work deserves recognition and reward. Our compensation and benefits packages are designed to be competitive and to grow with you over time. Starting compensation is based on experience, and we offer a variety of benefits and incentives to support and reward our team members. What you can expect from MCI: • Paid Time Off: Earn PTO and paid holidays to take the time you need., • Incentives & Rewards: Participate in daily, weekly, and monthly contests that include cash bonuses and prizes ranging from electronics to dream vacations and sometimes even cars!, • Health Benefits: Full-time employees are eligible for comprehensive medical, dental, and vision coverage after 60 days of employment, and all employees have access to MEC medical plans after just 30 days. Benefit options vary by location., • Retirement Savings: Secure your future with retirement savings programs, where available., • Disability Insurance: Short-term disability coverage is available to help protect you during unexpected challenges., • Life Insurance: Access life insurance options to safeguard your loved ones., • Supplemental Insurance: Accident and critical illness insurance, • Career Growth: With a focus on internal promotions, employees enjoy significant advancement opportunities., • Paid Training: Learn new skills while earning a paycheck., • Fun, Engaging Work Environment: Enjoy a team-oriented culture that fosters collaboration and engagement., • Casual Dress Code: Be comfortable while you work. Compensation & Benefits that Fit Your Life MCI takes pride in tailoring our offerings to fit the needs of our diverse team across subsidiaries and locations. While specific benefits and incentives may vary by geography, the core of our commitment remains the same: rewarding effort, providing growth opportunities, and creating an environment where every employee feels valued. If you're ready to join a company that recognizes your contributions and supports your growth, MCI is the place for you. Apply today! This job operates in a professional office environment. While performing the duties of this job, the employee will be largely sedentary and will be required to sit/stand for long periods while using a computer and telephone headset. The employee will be regularly required to operate a computer and other office equipment, including a phone, copier, and printer. The employee may occasionally be required to move about the office to accomplish tasks; reach in any direction; raise or lower objects, move objects from place to place, hold onto objects, and move or exert force up to forty (40) pounds. All MCI Locations • Must be authorized to work in the country where the job is based. Subject to the program and location of the position • Must be willing to submit up to a LEVEL II background and/or security investigation with a fingerprint. Job offers are contingent on background/security investigation results., • Must be willing to submit to drug screening. Job offers are contingent on drug screening results. At MCI and its subsidiaries, we embrace differences and believe diversity benefits our employees, company, customers, and community. All aspects of employment at MCI are based solely on a person's merit and qualifications. MCI maintains a work environment free from discrimination, where employees are treated with dignity and respect. All employees are responsible for fulfilling MCI's commitment to a diverse and equal-opportunity work environment. MCI does not discriminate against any employee or applicant on the basis of age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances. MCI will consider qualified applicants with criminal histories for employment in a manner consistent with local and federal requirements. MCI will not tolerate discrimination or harassment based on any of these characteristics. We adhere to these principles in all aspects of employment, including recruitment, hiring, training, compensation, promotion, benefits, social and recreational programs, and discipline. In addition, MCI's policy is to provide

Danovo Energy Solutions is an independent technology, consulting, and testing company providing business and technical expertise along with advanced methodologies and processes to utilities and others in the power and energy industries. Our mission is to provide unparalleled value to our clients in every engagement across the value chain by using advanced software and hardware, laboratories, and custom tools in a holistic approach to practical service and the most insightful thought leadership in the industry. At Danovo Energy Solutions, our people define us. We value a company culture based on core values of diversity, teamwork, respect, accountability, innovation, and entrepreneurial spirit. Not only will you get the chance to work alongside industry thought leaders, but the opportunity to become a thought leader yourself. We’re focused on creating an environment committed to employee growth. That is achieved by ensuring a quality workspace, allowing flexible schedules, and through our training & mentoring programs. Danovo Energy Solutions is committed to an equal-opportunity workplace. Danovo Energy Solutions is a wholly owned subsidiary of Quanta Services (NYSE: PWR), a member of the S&P 500 and the largest specialty engineering construction company in North America, serving energy companies and communication utilities around the world. POSITION OVERVIEW We are seeking a highly experienced Transmission Planning Consultant to lead technical studies and provide strategic insights into the evolving power grid landscape. This role involves conducting advanced transmission system analyses, collaborating with utility clients, and guiding project execution from concept to delivery. The ideal candidate will bring deep expertise in power system modeling, regulatory compliance, and project leadership. Lead Engineers are responsible for leading a team of advisors or senior advisors and providing tactical advice to clients at the department, director, or manager level. These individuals must be able to understand complex industry and technical challenges and develop and lead solutions from different disciplines at the tactical level. A typical scope of work for this position includes developing solutions to complex problems that involve technical and economic perspectives. Key Responsibilities • Conversant in performing powerflow studies at various capaciies and system conditions, • Conduct comprehensive transmission system studies including load flow, stability, short-circuit, and voltage analysis using industry-standard tools., • Evaluate grid performance and recommend solutions to support renewable integration and system reliability., • Interpret and apply regulatory standards (NERC, FERC, regional entities) to ensure compliance and assess operational risks., • Lead technical execution of planning projects and mentor junior engineers and analysts., • Develop and present technical reports, financial models, and strategic recommendations to clients and stakeholders., • Support business development efforts including proposal writing and client engagement., • Collaborate across teams to deliver high-quality consulting services tailored to client needs., • Mentor Associate and Entry level planning engineers Required Qualifications Business Development Responsibilities Business Development responsibilities include identifying and helping to develop strategic revenue-generating relationships with existing or potential customers. After an initial adjustment period, Senior Advisors typically will perform Business Development activities assisting others in this area. Achievement of Business Development activities which result in being able to support one’s self in billable work. The ability to support additional staff in billable work will improve one’s assent within this position’s pay range. However, Senior Advisors with strong technical skills who do not perform any level of Business Development activity may only ascend to the mid-level of this position’s pay range. Travel Minimial travel requirements, but the ideal candidate should be willing and able to travel to client locations and industry meetings if and when needed. Education & Experience • Minimum of 8 years of experience in transmission planning, utility operations, or power systems consulting., • Demonstrated ability to work independently and lead multidisciplinary teams., • Master’s degree in Electrical Engineering or a relevant technical field, • Strong understanding of transmission system planning methodologies and regulatory frameworks., • Recognized as a top industry expert in at least one area of the utility industry as demonstrated by peer-reviewed publications, leadership in technical societies, industry awards, and/or patents Systems & Skills • Excellent analytical, communication, and organizational skills., • Ability to work in a diverse and inclusive space, • Ability to work in a team dynamic, • Proficiency in software tools such as PSS®E, PSLF, PSCAD, EMTP/ATP, SKM, ETAP, and Promod. Preferred Qualifications Education & Experience • Professional Engineer (PE), • PhD in Electrical Engineering or a relevant technical field, • Familiarity with regional transmission organizations (e.g., PJM, CAISO, ERCOT, MISO, SPP)., • Ability to manage multiple projects and meet tight deadlines. Systems & Skills • Experience with financial modeling and lifecycle cost analysis. Location Danovo Energy Solutions has offices in Raleigh, North Carolina; Markham, Ontario; Lombard, Illinois; and San Clemente, California. We offer hybrid employment that supports a blend of in-office and/or remote work. Compensation & Benefits Danovo Energy Solutions offers a competitive compensation package, including performance-based bonuses and a comprehensive benefits program. Our offerings are designed to support overall well-being. We believe in recognizing and rewarding the contributions of our team through meaningful and equitable compensation Working Conditions Working conditions are typical of a professional office environment. When working in field or laboratory settings, the use of personal protective equipment (PPE) and completion of additional safety training may be required. The role may involve lifting and carrying equipment, standing for extended periods, and working in varying weather conditions. Job duties may require the ability to sit, stand, kneel, bend, and perform other physical movements associated with the work. Specific vision abilities (such as close vision, distance vision, color vision, or depth perception) may be required depending on the assigned job duties. Qualified individuals with disabilities may perform the essential functions of this role with or without reasonable accommodation. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. The employee may be asked to perform other job-related duties as required. At Danovo Energy Solutions, we offer a challenging and rewarding work environment where our employees are encouraged to grow and develop their skills. We are committed to providing equal employment opportunities for all individuals and do not discriminate based on race, color, religion, sex, national origin, age, disability, or any other legally protected status. If you are interested in becoming a part of our team and possess the required qualifications and experience, we encourage you to apply for this exciting opportunity. Danovo Energy Solutions does not use artificial intelligence in our recruitment and selection process.

Are you an experienced Senior Software Engineer- Mainframe with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Senior Software Engineer- Mainframe to work remotely in their company. Responsibilities and Duties: This senior-level position is an integral member of an agile software engineering team responsible for designing, developing, enhancing, and supporting business-critical enterprise applications. The engineer will provide deep mainframe expertise for high-volume, file-based financial processing and will participate throughout the software delivery lifecycle, from requirements and technical design through development, testing, implementation, and production support. • Software Design and Engineering: Create engineering specifications and technical designs for mainframe applications, batch programs, interfaces, data-transformation processes, and supporting components., • Mainframe Development: Design, develop, test, implement, and maintain senior-level mainframe solutions using COBOL, JCL, z/OS tools, batch-processing patterns, and flat-file interfaces., • Financial Data Processing: Maintain and enhance rules that standardize source data, map financial attributes and General Ledger accounts, validate required information, and transform transactions into client-ready financial feeds., • Interface and Data Support: Develop and support inbound and outbound file processing, interface extracts and passbacks, translation and validation tables, control-total files, journal-entry outputs, and detail and summary files., • Production Support: Diagnose and resolve production abends, failed batch jobs, file-processing errors, data discrepancies, mapping defects, balancing failures, and reconciliation issues. Perform safe restart and recovery activities and communicate impacts and status promptly., • Controls and Auditability: Preserve data integrity and financial-control requirements through duplicate-file checks, record and control-file balancing, traceability, reconciliation, and evidence needed for audit or compliance reviews., • Integration Delivery: Partner with Finance, Accounting, Business Systems Analysts, data and integration teams, operations, architecture, testing, and product teams to deliver new interfaces, financial feeds, platform changes, and client or line-of-business onboarding., • Software Quality: Write code that adheres to coding standards, perform code reviews, develop unit and integration tests, and follow source-control, build, deployment, testing, and change-management practices., • Agile Execution: Participate in scrum ceremonies, sprint planning, backlog refinement, estimation, story creation, definition of done, acceptance criteria, task creation, status updates, and final execution of software changes., • Technical Leadership: Evaluate technical alternatives, identify feasibility and operational trade-offs, safeguard functionality and performance, communicate blockers, document support procedures, and mentor associate and intermediate engineers., • Additional Responsibilities: Participate in scheduled production support and after-hours implementation or incident coverage as required. Perform other duties as assigned or requested. Required Qualifications: • Education: Bachelor's degree in Computer Science, Computer Engineering, Computer and Information Science, or a closely related field, or equivalent relevant experience consistent with company hiring standards., • Experience: At least 5 years of professional software engineering experience designing, building, deploying, and supporting scalable, highly available, or business-critical systems., • Senior-level knowledge of mainframe systems, demonstrated through substantial hands-on experience with z/OS application development, production batch operations, troubleshooting, implementation, and support., • Strong hands-on experience developing and maintaining COBOL programs and JCL, including job streams, file-based processing, dependency handling, abnormal-end diagnosis, restart and recovery, and production implementation., • Experience supporting large-scale batch applications that process financial, accounting, claims, billing, payment, or similarly controlled enterprise data., • Experience with algorithm and data-structure fundamentals, system design, technical feasibility evaluation, design patterns, and maintainable application architecture., • Experience translating business requirements, technical specifications, prototypes, interface definitions, or user stories into working software solutions. Skills/Competencies: • Advanced proficiency in COBOL and JCL for enterprise mainframe batch development and support., • Strong understanding of z/OS, mainframe datasets, flat-file layouts, record processing, job dependencies, control files, batch scheduling, operational monitoring, and failure recovery., • Working knowledge of SQL and relational data concepts. Experience with Oracle or PeopleSoft-related tables and query tools is beneficial for financial translation and validation processing., • Ability to analyze complex data flows across source extracts, translation processes, passback files, control totals, detail and summary outputs, data-warehouse feeds, and General Ledger interfaces., • Knowledge of professional software-engineering practices across the full SDLC, including coding standards, unit testing, code reviews, source control, build and deployment processes, operations, and technical documentation., • Experience with Agile/Scrum delivery and work-management tools such as Jira, RTC, or Digital.ai Agility., • Strong production-support, root-cause-analysis, problem-solving, and incident-communication skills., • Ability to collaborate with technical and non-technical partners and translate financial or operational requirements into reliable technical solutions., • Ability and willingness to mentor less-experienced engineers and serve as a senior technical resource., • Certifications: None required., • Other Requirements: Travel requirement: 0% to 25%. Ability to support planned implementations, batch-processing windows, and critical production incidents outside standard business hours when required. Must comply with applicable privacy, information-security, confidentiality, HIPAA, Code of Business Conduct, legal, regulatory, and training requirements., • Key Attributes: Senior technical judgment, ownership, urgency, attention to detail, accountability, analytical thinking, clear communication, collaboration, adaptability, and a strong commitment to reliable financial processing and data integrity. Preferred Qualifications: • Master's degree in Computer Science, Computer Engineering, Information Systems, or a related field., • 7 or more years working with varied technology systems, designing solutions, or developing applications in healthcare, financial services, or another highly controlled industry., • Prior experience supporting General Ledger, accounting, reconciliation, journal-entry, claims, billing, payment, or financial-reporting applications., • Experience with a mainframe-based financial translation or interface application. Prior experience with the specific in-house application is not required., • Experience with Oracle or PeopleSoft data structures, Informatica or enterprise data-integration processes, managed file-transfer patterns, data-warehouse integrations, and enterprise job scheduling., • Experience with translation tables, validation rules, financial mappings, balancing controls, duplicate-file checks, reconciliation, and audit evidence., • Knowledge of healthcare payer data and financial feeds., • Exposure to Java, Python, JavaScript, C/C++, or other programming languages that support broader engineering work and modernization initiatives.

The Warehouse Technician Driving operates in a key role that supports patients through daily warehouse operations. The position combines hands-on equipment management with shipping and inventory support. If you're detail-oriented and passionate about safe warehouse operations, this is the role for you. Core Responsibilities • Pick, pack, and prepare orders for shipment; verify accuracy against invoices, • Receive, inspect, and stock incoming inventory, • Clean, disinfect, test, and perform minor repairs on returned equipment, • Track inventory, monitor stock levels and expirations, and report shortages, • Maintain a clean, organized, and compliant warehouse environment, • Perform data entry, order tracking, and basic administrative tasks (scanning, filing, etc.), • Assist with loading/unloading equipment and staging deliveries, • Follow driving policies and complete deliveries safely and on time, • Deliver and set up respiratory and home medical equipment in patient homes and healthcare facilities, • Educate patients and caregivers on proper use, care, and safety of equipment, • Perform basic patient assessments and follow-up visits as needed, • Troubleshoot equipment issues and provide support in urgent situations, • Complete visit documentation and ensure accurate patient records, • Maintain strict confidentiality and adhere to HIPAA guidelines, • Follow all infection control, PPE, and safety protocols, • Performs other duties as assigned Why You're the Best Fit • High School Diploma or equivalent work experience required, • One (1) year of experience in warehouse, construction, general labor, military, equipment repair, maintenance or work that is transferrable to the job duties of the role is required, • Valid and unrestricted Driver's License, • Able to manage priorities in a fast-paced environment, • Basic technical/mechanical and computer skills, • Strong attention to detail including problem solving skills Work Environment • This position requires driving/travel., • Physical Requirements: Each role has a unique set of physical demands and work environment(s) that an employee will encounter while performing the essential function of the job. Reasonable accommodations may be made to enable individuals with disability(s) to perform the essential functions. For more detail surrounding these requirements please inquire upon application selection. Compensation • Compensation is based on experience, location and role level Total Rewards & Benefits Program • Comprehensive medical, dental and vision coverage (eligible first of the month following hire), • 401(k) with company match, • Paid Time Off Plans including 6 paid holidays, • Employee Stock Purchase Plan, • Paid Parental Bonding Leave, • Short and Long-term Disability Insurance, • Life and AD&D Insurance, • Flexible Spending Accounts (FSA) and Health Savings Accounts (HSA), • CVS Minute Clinic and Teledoc access, • Spousal Advantage Reimbursement Plan, • Identity Theft Protection and Legal Plan *Applicable waiting periods apply Requirements Disclosure • Company conducted Background Check is required for all roles, • Company conducted Motor Vehicle Record Check is required for driving roles, • Clinical roles require valid licensure/certification, where applicable AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual's race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination. Ready to Make an Impact? If you're passionate about and committed to changing lives, we want to hear from you. Apply today and take the next step in your career with AdaptHealth!

Job DescriptionDescription: Fence Installer Job Summary The Entry-Level Fence Installer works as part of a 2–3 person crew to install commercial permanent and temporary fencing, including wood, chain link, PVC, aluminum, and other materials. This role is ideal for individuals who are dependable, eager to learn, and capable of performing physical work in outdoor environments. Training is provided, and motivated employees can advance into higher-level installer and journeyman roles. Essential Duties & Responsibilities • Install commercial fencing systems according to project specifications and company standards, • Prepare installation sites, including digging post holes, setting posts, and ensuring proper alignment, • Ensure all fence installations are level, plumb, secure, and completed with quality workmanship, • Operate hand and power tools safely and effectively, • Assist with routine maintenance and repairs on installed fencing as needed, • Communicate clearly with crew members, supervisors, and customers to support efficient project completion Qualifications • Driver’s License & Clean MVR — No suspensions within the last 3 years, • Background — Must pass a background check, • Experience — At least 1 year of fence installation experience preferred, but motivated candidates with relevant construction or outdoor labor experience will be considered, • Technical Skills — Experience driving 2–3 ton trucks and towing trailers is a plus, • Communication — Strong verbal and written communication skills, • Physical Requirements — Ability to lift equipment, work outdoors in various weather conditions, climb ladders, and work in confined spaces Physical Demands Employees must be able to talk and hear regularly, use hands and fingers to operate tools, and stand, walk, kneel, squat, and reach for extended periods. Occasional lifting or moving of up to 50 pounds is required. Vision requirements include close vision, distance vision, and the ability to adjust focus. Reasonable accommodations may be made for individuals with disabilities. Work Environment Work is performed around moving mechanical parts and may involve exposure to moderate noise, fumes, or airborne particles. Tasks may occur outdoors in varying weather conditions. Reasonable accommodations may be made for individuals with disabilities. Requirements:

Job Description Job Title: Maintenance Technician CNC and Industrial Equipment Job Description This role focuses on troubleshooting, repairing, and maintaining a wide range of mechanical, electrical, and electronic systems within a modern, climate-controlled engine blade repair facility. The technician works with CNC equipment, AC/DC motors, control systems, and industrial piping to ensure machines operate safely, efficiently, and reliably. Responsibilities • Troubleshoot and diagnose mechanical, vacuum, and light electrical/electronic issues on a variety of machine tools., • Read and interpret assembly drawings, repair manuals, schematics, and instruction sheets for mechanical and electrical/electronic assemblies., • Perform general maintenance on three-phase AC motors and DC motors., • Troubleshoot AC/DC control systems, including PLCs and variable frequency drives (VFDs)., • Use diagnostic tools such as multimeters and amperemeters to test and verify electrical performance., • Perform maintenance on pumps, belts, pulleys, gearboxes, speed reducers, and ball screw motion systems., • Work with and support CNC equipment, including routine maintenance and basic troubleshooting., • Install and repair piping systems, including copper, PVC, black iron, and stainless steel., • Safely operate forklifts and man lifts as needed for maintenance and repair activities., • Follow written procedures and instructions, including FAA-regulated documentation, to perform work accurately and safely., • Complete required training during the initial days on the job and apply learned procedures in daily work., • Adhere to facility safety practices, including proper use of personal protective equipment and safe work methods. Essential Skills • Proven ability to troubleshoot and diagnose mechanical, vacuum, and light electrical/electronic problems on machine tools., • Ability to read and interpret assembly drawings, repair manuals, schematics, and instruction sheets., • Hands-on experience performing maintenance on three-phase AC motors and DC motors., • Demonstrated ability to troubleshoot AC/DC control systems, including PLCs and VFDs., • Proficiency using diagnostic tools such as multimeters and amperemeters., • Experience maintaining pumps, belts, pulleys, gearboxes, speed reducers, and ball screw motion systems., • Familiarity with CNC equipment and its maintenance requirements., • Ability to install and repair copper, PVC, black iron, and stainless steel piping systems., • Experience operating forklifts and man lifts in an industrial setting., • Knowledge of electrical maintenance, electrical troubleshooting, pneumatics, and hydraulics., • Experience with Allen-Bradley or similar industrial control systems., • High school diploma or equivalent., • Ability to read and write English to follow technical documentation and FAA-regulated instructions., • Willingness and ability to wear steel-toe footwear as required by the facility. Additional Skills & Qualifications • Maintenance technician in an industrial or manufacturing environment., • Experience in PLC troubleshooting and electrical maintenance on production equipment., • Familiarity with troubleshooting complex AC/DC control systems in high-precision environments., • Comfort working with pneumatic and hydraulic systems on machinery., • Ability to complete initial training within the first three days and maintain ongoing compliance with regulated procedures., • Strong attention to detail and commitment to accurate documentation., • Reliability in following safety guidelines and standard operating procedures., • Readiness to work a first-shift schedule from 6:00 a.m. to 2:30 p.m. Why Work Here? Employees work in a clean, climate-controlled, state-of-the-art facility designed for precision and comfort. There are strong opportunities for growth, with many current leaders having advanced from entry-level roles. Once hired directly, team members have access to comprehensive medical, dental, and vision coverage for both preventative and non-routine care, along with wellness programs, retirement savings options, income protection, work-life support resources, relocation assistance, and tuition reimbursement. The culture emphasizes professional development, long-term stability, and support for employees overall well-being. Work Environment The role is based in a state-of-the-art engine LPT blade repair facility that is clean and climate controlled, supporting high-precision work and employee comfort. The environment includes CNC equipment, industrial motors, pumps, and advanced control systems such as PLCs and VFDs. The standard schedule is first shift, from 6:00 a.m. to 2:30 p.m. The facility requires steel-toe footwear and adherence to established safety practices. Work involves using tools such as multimeters and amperemeters, operating forklifts and man lifts, and following regulated instructions, including FAA-related documentation, in a structured and well-organized settin Job Type & Location This is a Contract to Hire position based out of Grand Prairie, TX. Pay and Benefits The pay range for this position is $28.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Grand Prairie,TX. Application Deadline This position is anticipated to close on Oct 14, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Assigns technical tasks and coordinates with entry-level engineers. The Controls Project Manager II is responsible for assisting an OTS Director in organizing our ongoing projects. The Controls Project Manager II will assist with processes, procedures, management, and documentation needed for CPG's

Job Description Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security Integration Job Type Full Time Employee Years of Experience No Experience Required Career Level Entry-Level Exemption Status Exempt Account Manager What we're looking for: We are seeking an energetic, enthusiastic Account Manager in the security industry to join our fast-growing and dynamic team. What you'll be doing: This position will have multiple roles ranging from: managing existing client's needs and developing long-term relationships w/assigned accounts. Presenting solutions based on customer requirements and working with operations and engineering on a regular basis to develop proposals and to ensure the timely and successful delivery of our solutions. • Management of existing customer accounts., • Build and maintain strong, long lasting customer relationships, • Operate as the lead point of contact for matters specific to your customers, • Ensure the timely and successful delivery of solutions according to customer needs and objectives, • Project estimating., • Forecast and track key account metrics, • Networking with vendors, suppliers and industry contacts., • Creation of quotes and scopes of work. What you bring to the table: • Basic technical understanding of key product lines., • Must be able to communicate effectively and professionally in both written and verbal manner to customers and to those within the company., • Must possess a positive attitude and be willing to interact with customers, co-workers and other personnel at all times., • Ability to manage multiple projects at a time while paying strict attention to detail., • Commitment to integrity and to the Company Standards and Procedures., • BA/BS degree or equivalent What we bring to the table: • Salary based upon background and experience., • An awesome, collaborative culture, • Vehicle allowance, • Compensation based upon background and experience, • Full benefits package, • Vacation, • Cellphone Allowance We are an equal opportunity employer and drug-free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position below. More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn't convincing enough, check out what our employees say about working at NextGen: https://www.youtube.com/watch?v=qLQVPTlAlJM Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security's HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security's website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security's HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security's HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job DescriptionDescription: TAS Environmental Services, LP- Emergency Response Services & Environmental Solutions ready to respond wherever, whenever, every time. TAS Environmental Services is headquartered in the Dallas, Texas area and serves companies of all sizes across the South and into the Midwest. For over 100 years, our industrial economy has been built on Oil & Gas, technology, and infrastructure. Today, it is essential for every business and municipality to have a "go-to" vendor for environmental solutions, from industrial cleaning services to emergency response services, to hazardous waste transportation and box rentals. We are prepared 24/7 and every day of the year. At TAS Environmental Services, LP, the Technician will assist in the day-to-day operations to include emergency response, cleaning of equipment, inventory of supplies and assets, and industrial tank cleaning. Potential for dirty and physically demanding work environment along with strenuous physical labor. BENEFITS TAS Environmental Services offers a competitive benefits program, including comprehensive group health and related benefits plan. The following list of benefits is offered only to employees in regular (full-time) positions: Health & Wellness: • Comprehensive Medical, Dental, and Vision Coverage, • Mental Health Support Programs, • Supplemental Benefits - Accident, Critical Illness, etc., • Access to a company provided Employee Assistance Program, • Retirement & Financial:, • 401(k) with Company Match, • Life Insurance and Disability Coverage, • Work-Life Balance:, • Generous Paid Time Off (PTO), • Paid Time Off increases based on years of service, • Holidays - seven (7), • Floating Holidays - two (2), • Professional Development:, • Access to Online Learning Platforms, • Annual Conference and Workshop Allowances, • Additional Perks:, • Work Boot Program, • Team Building Events Requirements: RESPONSIBILITIES • Handling various products, hazardous and non-hazardous materials, • Performing industrial work and biohazard cleanups, • Staging, profiling, and processing for disposal hazardous and non-hazardous waste, • Assist in the removal of soil, debris and other materials, and cleaning up spill sites, • Operate and clean equipment., • Maintaining logs of working hours in compliance with all applicable state and federal regulations, • Up to 25% travel as needed - location may differ, • Other duties as assigned COMPETENCIES/SKILLS • Strong observation skills, • Technical proficiency with field equipment, • Knowledge of environmental regulations, • Data collection and analysis skills, • Ability to work outdoors in all weather conditions, • Excellent communication skills, • Proficient in critical thinking, • Teamwork oriented Physical Requirements: • While performing the duties of this job, the employee is regularly required to talk and hear, • This position requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing at times, • The employee must frequently lift or move items up to 60 pounds, • Must be able to frequently climb stairs and ladders, • May occasionally deal with heights, • Ability to wear Personal Equipment, including Respiratory Protection, • Consists of both office setting and physical jobsite, • Able to work in confined spaces when needed Education and Experience: • HAZWOPER and Confined Space certifications preferred, • Ability to read, write and do mathematics, • Class C (Texas) or equivalent required, • Level 1 Technicians will be responsible for obtaining and maintaining several certifications while employed including:, • HAZWOPER 40, • OSHA 10 and 30, • MSHA(Mine Safety and Health Administration) Certification, • CSE/R(Confined Space Entry/Rescue) Certification, • CPR Certification, • H2S Certification, • First Aid Certification EEO/AA Employer/ Veteran/ Disabled Statement: TAS Environmental Services, LP provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. TAS Environmental Services, LP is recognized as a leading regional provider of Environmental Services. Our service offer includes Emergency Response, Industrial Cleaning, Waste Management and Midstream Services and Solutions. Our mission is to build unrivaled partnerships by being an invaluable safe resource to our customers through knowledge, collaboration, and the dedication of our people. We aim to deliver best-in-class performance across the business system while adhering to our core values and maintaining the highest standard of ethical business practices.

Job DescriptionLet your Career Thrive with Volt! Volt is immediately hiring for a 1st Shift Sr. Assembly Operator in Richardson, TX! Advance the future of RF semiconductor technology. Volt is seeking a highly skilled Sr. Assembly Operator to join an innovative manufacturing team supporting the development of cutting-edge RF power amplifier modules and evaluation boards. If you excel in die attach, wire bonding, EVB assembly, and advanced prototype builds, this is your opportunity to make a direct impact on next-generation products in a collaborative, high-tech environment. As a Sr. Assembly Operator, you will: • Assemble and rework evaluation board circuits., • Follow and adhere to established assembly processes, procedures, and workflows., • Read and interpret assembly instructions, circuit diagrams, schematics, and engineering documentation., • Program, operate, and troubleshoot assembly equipment including Datacon, K&S Iconn, SMT, Mold, Saw, and related equipment., • Perform RF power amplifier module assembly including:, • GaN/GaAs die attach, • Wire bonding, • SMD component soldering, • Glopping, • Provide technical guidance and support to entry-level technicians., • Maintain component inventory and organize stock for production and development activities., • Ensure quality standards and production requirements are met., • Support prototype and evaluation board builds in a fast-paced manufacturing environment., • Collaborate with engineering and production teams to meet project objectives., • Adhere to all company safety procedures and quality standards. This is a full-time, Direct Hire opportunity. The ideal candidate will have: Required Skills & Qualifications • 7+ years of experience in a semiconductor or fab manufacturing environment., • 5 to 7 years of RF power amplifier module and discrete assembly experience., • Experience assembling and reworking evaluation boards (EVB)., • Demonstrated success working with assembly processes and manufacturing operations., • Ability to read and interpret RF assembly diagrams, schematics, and technical documentation., • Experience operating RF prototype assembly equipment including Datacon, K&S Iconn, SMT, Mold, Saw, and related equipment., • Familiarity with semiconductor manufacturing equipment., • Proficiency with Microsoft Word, Excel, PowerPoint, and Windows-based software., • Strong organizational and time management skills., • Ability to adapt to changing priorities, goals, and business needs., • Ability to work on multiple projects and assignments simultaneously., • Ability to work onsite in an office/manufacturing environment.Preferred Skills & Qualifications, • Experience supporting prototype development and engineering evaluation builds., • Prior experience mentoring or training junior technicians., • Knowledge of RF power amplifier module manufacturing processes., • Continuous improvement or process optimization experience within semiconductor manufacturing environments.Soft Skills, • Excellent verbal and written communication skills., • Strong problem-solving and analytical abilities., • Adaptability and flexibility in a changing environment., • Ability to collaborate effectively across teams., • High attention to detail and commitment to quality. Salary: $25.00 - $30.00 an hour Shift: Mon - Fri - Day shift Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Benefits will be provided by the client as this is a direct hire role. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email hr_dept@volt.com or call (866) 898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with applicable federal, state, and local laws. By applying for this job, I agree to receive calls and emails (including automated or AI-generated calls or emails) from Innova Solutions, Inc. and its identified recruiting partners regarding this job and future recruiting and job-placement opportunities. I understand that my consent is not a condition of employment or services, and that I may revoke my consent at any time by following the Opt Out Instructions. I confirm that I have read and agree to the Terms of Service and acknowledge that I have received and reviewed the Privacy Notice. Pandologic. Keywords: Assembler, Location: Richardson, TX - 75081 , PL: 604540759