Equipment engineer jobs in Commack, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job DescriptionDescription: Position Summary: An Automated Systems Engineer is responsible for providing hands-on controls and electrical engineering support to correct, repair, and improve machinery, equipment and systems company-wide. This position is full-time, Monday through Friday, from 8:00AM - 4:00PM. Responsibilities: Responsibilities include, but are not limited to: • Troubleshoot and repair PLC electrical and control related issues., • Design and implement machine changes and improvements, including creating new control systems., • Draft new electrical drawings and modify existing electrical drawings., • Organize and maintain latest machine PLC programs, HMI programs, electrical drawings, and user manuals., • Communicate and work with maintenance and engineering personnel to resolve issues in a timely manner., • Procure parts and materials required for machine maintenance., • Assist in initiation of change control if new parts deviate from original specifications., • Assist in qualification of equipment., • Supervise, mentor, and advise mechanics to ensure machine repairs and operations are conducted in a safe, responsible manner., • Execute engineering support and maintenance to meet all requirements and yield a greater than 90% first time right., • Keep current and implement technology to enhance operation performance., • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect and accountability., • Bachelor’s Degree in Electrical Engineering or equivalent hands-on experience, • Knowledge of controls software (PLC, HMI, and Servo) from Allen-Bradley, Siemens, and Mitsubishi., • Knowledge of drafting software (AutoCAD) preferred., • Knowledge of OSHA and NEC code requirements., • Ability to follow company policies and procedures, including all SOPs., • Computer skills must include Microsoft Office, Word and Outlook., • May be required to lift up to 50 lbs, climb ladders, use tools, and manipulate machine parts., • Required to use hands to use computer controls, demonstrate equipment usage, etc., • Required to be present in-house to provide daily engineering support to multiple departments and management including VPs, directors, managers and to collaborate / mentor other personnel as required., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Indoor manufacturing environment including enclosed areas with dust and loud noises., • Potential to move between production operations sites/areas to complete job functions. $90,000 - $120,000 yearly

Job Description Ranked the overall #5 Best Civil Engineering Firm to Work for in the Nation and residing on the list of the Engineering News Record (ENR)’s Top 500 Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate is an entry level candidate with up to 3 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities may include, but are not limited to: • Preparation of trip generation estimates, roadway volume development, parking estimates, and analyses for their projects within the team., • Assisting in the analysis of field data, reports, maps, drawings, blueprints, tests, and aerial photographs to plan projects., • Obtaining, analyzing, and interpreting demographic and other regional transportation planning data., • Use of computer-assisted engineering and design software and equipment to prepare engineering and planning documents., • Assisting in the preparation or modification of planning documents, including transportation impact studies, and traffic operational analyses, for projects., • Assisting in the collection of field data., • Serving as onsite project representative., • Use of planning software and equipment to prepare engineering, design, and planning documents., • Responsible for job-specific quality system tasks as defined in the quality manual or handbook., • Responsible for other general office duties as may be assigned., • Collaborate with engineering and design teams to develop conceptual layouts for transportation improvements, including roadway access, pedestrian and multimodal facilities., • Prepare high-level design sketches, diagrams, and visualizations to support proposals, stakeholder presentations, and client deliverables. Job Requirements: • Bachelor’s Degree in Engineering, • Engineer in Training Certification Preferred, • Experience utilizing any or all of the following: Synchro, SimTraffic, Excel, AutoCAD/MicroStation (preferred but not required), • Aptitude for detail-oriented work assignments, • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description Electrical Engineer – Technology Manufacturing Location: Hauppauge, NYSalary Range: $80,000–$100,000Employment Type: Full-TimeWork Environment: On-site, industrial setting Overview:A growing technology manufacturing company is seeking a skilled Electrical Engineer to join its engineering team. This role involves hands-on work with high-voltage systems and offers the opportunity to contribute to the development of advanced industrial components used in precision applications. Key Responsibilities: • Design, modify, and evaluate electronic circuitry and components for high-voltage industrial systems., • Test, troubleshoot, and debug electrical components and integrated systems., • Conduct experimental tests and analyze performance data., • Collaborate with technical personnel to ensure prototype models meet design specifications., • Review engineering drawings and designs for compliance with internal standards and national codes., • Generate and maintain Bills of Materials (BOMs)., • Work closely with mechanical, software, and electrical engineers to develop and refine system documentation., • Support the creation of technical manuals and customer-facing documentation., • Maintain engineering reports and contribute to continuous improvement initiatives., • Provide technical support to resolve customer issues and ensure high service standards., • Bachelor’s degree in Electrical Engineering., • Internship or professional experience in a manufacturing or engineering environment., • Strong understanding of electrical circuitry and safety protocols., • Ability to read and interpret electrical diagrams., • Familiarity with schematic capture and PCB layout tools., • Prior hands-on experience with soldering., • Proficiency in Microsoft Office Suite., • Strong written and verbal communication skills., • Ability to manage multiple tasks in a fast-paced environment., • Must be authorized to work in the U.S., • Knowledge of regulatory standards such as CE or UL., • Experience with ERP or MRP systems., • Ability to sit, stand, walk, bend, and lift up to 50 lbs regularly., • Manual dexterity to operate tools and equipment., • Visual acuity for detailed work and safety awareness., • Effective communication across various platforms., • Ability to travel domestically and internationally as needed., • Capable of working under deadlines and managing multiple priorities. Pay Details: $80,000.00 to $100,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Narda MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The RF/microwave Amplifier Design Engineer is an experienced professional with the capability to design discrete transistor and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies. Able to synthesize and develop new amplifier components using CAE analysis tools and has hands-on bench troubleshooting and test skills. The individual effectively communicates with contacts inside and outside of own department, customers, and suppliers. Recommends enhancements to systems and processes. Possesses practical project management skills and will work under general supervision to achieve technical performance while meeting schedule and cost operational targets for specific programs and projects with moderate impact on departmental results. Essential Functions: • Design, develop, test and support production of discrete and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies., • Conceptualize and develop new RF and microwave circuits, packages, and products., • Perform linear and nonlinear circuit simulations of microwave active and passive circuits., • Provide direction on hi-reliability specifications, i.e., the screening and testing for our products to be compliant., • Develop specifications for microwave components and subassemblies., • Generate design review presentations and test reports., • Design for ease of manufacturing., • Estimate and track project schedules and labor for engineering developments., • Bachelor’s Degree in Electrical Engineering and a minimum of 4 years prior relevant experience or a Graduate Degree and a minimum of 2 years prior related experience., • A minimum of 2 years designing and simulating low noise amplifiers., • Experience designing RF/Microwave passive components, e.g., couplers, power dividers and attenuators., • Ability to manage projects and interface to other areas., • Experience designing products for manufacturing., • Proficient in linear CAE and experience with non-linear CAE., • Ability to work under a microscope in a clean room environment to test and tune circuits., • Experienced user of microwave test equipment; including network analyzers, noise figure analyzers, spectrum analyzers, power meters and signal generators., • Familiarity with device semiconductors, such as GaAs and GaN., • Ability to gain Secret Level Security Clearance., • Familiarity with MIL specifications, such as MIL-PRF-38534 and MIL-STD-202., • Hands-on experience testing and aligning fine pitch circuits under a microscope., • Design experience with oscillators, synthesizers, and PIN diode circuits., • Knowledge/application of filter synthesis and design., • System analysis experience comprising both cascade and spur analysis., • Proficient use of Keysight ADS, Keysight RFPro, and/or Ansys HFSS simulation tools., • Perform EM simulations of microwave housings, boards, transitions, and passive circuits., • Use of CAD tools such as AutoDesk Inventor and AutoCAD., • Design/test experience of circuits operating through 26GHz is favored, with operation up through 40GHz further preferred., • Experience with both chip and wire hybrid and PCB surface mount manufacturing methods., • 401k, • Health/Dental/Vision insurance, • Life Insurance, • Paid time off, • Tuition Reimbursement Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description Job Summary The Design Engineer 3 provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description Introduction Are you a technology-focused, problem solver individual looking to jump-start your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level II Systems Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including: medical/dental/vision, retirement plans, paid-time off, and more.Responsibilities:, • Deliver expert service focused on the timely resolution of issues while exceeding client expectations for quality and professionalism., • Receive incoming technical issues and requests that will include software, hardware and operating system problems for all company and customer-supported technologies. This will include desktops, laptops, wireless devices, peripherals, and commercial as well as proprietary software within the organization., • Perform general break/fix and preventative maintenance functions as necessary: provide hands-on and/or remote support to desktops, laptops, wireless devices, and peripherals. You may also be required to perform basic hardware/software troubleshooting on servers and other network components., • Perform all build, configuration, and install services for desktops, laptops, wireless devices, peripherals etc., • Escalate issues and requests to higher level (Engineering Teams, Application Development, 3rd-party Vendors, etc.) whenever necessary in accordance with pre-defined SLA’s., • Open, track, escalate and resolve each assigned ticket in our in-house problem ticketing system.Requirements:, • Bachelor’s degree in an IT-related discipline or equivalent work experience., • 2-4 years full-time experience in a technical support role., • Technical certification in a relevant technology discipline. (preferred), • Must have reliable transportation, a valid NYS driver’s license and be willing to travel throughout the New York Tristate area., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Able to interact effectively with all levels of internal and customer contacts., • Security related technologies (multifactor authentication, application control, encryption solutions, etc.), • Microsoft Windows version through Windows 10 Operating Systems for desktops & laptops, • Microsoft Office versions through Office 365, • O365 Migrations and Management, • Wireless devices and networks., • Microsoft Windows Server, Active Directory, and associated services (DNS, WINS, DHCP, etc.)., • Microsoft Exchange Server and Cloud mail services., • MS Intune Experience, • VMware, • Implementation of Firewalls, • Implementation of Switches, • Meraki Wireless, • Networking architecture and equipment (routers, firewalls, switches, cabling, VoIP, etc.), • Backup-related technologies (hardware/software and cloud solutions), • Hard Drive Imaging Powered by JazzHR 33a4EfVH1I

Job Title: Facilities Maintenance Engineer – Hauppauge, NY Location: Hauppauge, NY Shift: Must be willing to work any assigned shift (1st, 2nd, or 3rd) depending on business needs Pay Range: (based on experience) Employment Type: Full-Time About the Role We are seeking a Facilities Maintenance Engineer with strong technical knowledge of pharmaceutical/industrial equipment and utilities. The role involves maintenance, troubleshooting, installation, and repair of facility systems and manufacturing equipment in compliance with cGMP standards. This position supports reliability, continuous improvement, and safe operations across the plant. Key Responsibilities • Perform preventive and corrective maintenance of manufacturing and facility equipment., • Monitor, troubleshoot, and repair HVAC, electrical, plumbing, boiler, and water systems., • Support installation and commissioning of new equipment and utilities., • Operate and maintain Building Management Systems (BMS) and respond to alarms., • Perform carpentry and facility upkeep (walls, doors, drywall, painting, etc.)., • Conduct investigations and prepare reports for deviations, CAPAs, and change controls., • Ensure compliance with cGMP, GDP, and safety procedures., • Coordinate with vendors and service providers for calibration, utilities, and facility services., • Document maintenance work accurately in SAP and other tracking systems., • Participate in compliance and regulatory inspections. Qualifications • High School Diploma/GED with at least 3 years’ experience in mechanical/electrical maintenance in a pharmaceutical or industrial setting required., • Bachelor’s degree in Engineering (Pharmaceutical, Mechanical, Industrial, or related) preferred., • Minimum 5 years’ experience in a cGMP manufacturing environment., • Strong knowledge of HVAC systems, BMS, DI water, utilities, and facility systems., • Experience with pharma machinery and utilities preferred., • SAP experience a plus., • Ability to read and interpret technical blueprints, SOPs, and equipment manuals., • Effective communication and organizational skills., • Must be able to lift 35 lbs and work in a fast-paced, regulated environment. Benefits • Competitive base salary, • 401(k) with company match., • Medical, Dental, and Vision coverage., • Paid Time Off (vacation, sick leave, holidays)., • Disability, parental leave, and employee discounts., • Opportunities for growth and development.

Job Description We are seeking a Quality Engineer to join our team! Responsibilities: • Create and improve automated systems and processes, • Perform first piece inspection, in-process inspection, final inspection, and incoming receiving inspection as required, • Help to Develop Quality Plans for specific jobs as required, • Utilize automated inspection equipment such as Hexagon Global CMM, Keyence Vision System, and Faro Arm to optimize inspection processes., • PC-DMIS programming to improve accuracy and efficiency in Automated quality checks., • Maintain a clean and safe work environment Qualifications: • Previous work experience in quality control., • Familiarity with CAD or other related software, • Strong attention to detail reading blueprints and checking parts to print., • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of various inspection equipment such as calipers, micrometers, comparators, etc., • Document all technical procedures and user guides Company DescriptionWe are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.We are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.

Job Description Vacuum Instruments Corporation is one of the world’s largest companies devoted solely to the research, design, manufacture, distribution, and service of leak detectors, gas handling equipment, and complete leak detection solutions. VIC is the only company in North America to offer both organically manufactured instruments and custom systems for tracer gas and air leak tests as well as gas management. VIC’s staff of engineers, system design personnel and applications specialists constitute the most experienced body of leak detection experts in the world. Vacuum Instruments Corporation (VIC) offers an unparalleled breadth of application knowledge and gas handling experience along with the fastest, simplest, and most robust leak detectors in the industry. Billions of products have been tested with VIC complete turnkey leak detection solutions, portable vacuum-type helium sniffers, general purpose helium leak detectors, as well as mass flow and pressure decay systems. We are seeking a Service Repair Trainee, who is able to be trained on how to offer a customized, service assessment approach for made to unit and systems for service, preventative maintenance, re-calibration, for the customers we serve. The Entry-Level Service Repair Trainee will perform various activities, in support of the standard leak detection systems, leak detectors and gas processing equipment that VIC designs and manufactures. We are seeking a self-starter, to begin as a trainee committed to delivering a high level of customer satisfaction, maximizes customer retention, and increases profitability, potentially growing into a full-time Service Technician (Engineer) role. The candidate will be based in our Corporate Office in Ronkonkoma, NY. Mandatory Must Haves: • 3 Years of solid prior Mechanical experience, • Electrical experience helpful, but not required, we are willing to provide training, • Willingness to eventually develop with the company and potentially be promoted into a more advanced role, which would then involve traveling, • Clean background check and Motor Vehicle Report, • Must reside on Long Island, • Maintain your own transportation Provide Entry-Level Service Repair Support in the following areas: • Provide service and customer support., • Support installations, repairs, maintenance, and test tasks., • Diagnose technical problems and determine proper solutions., • Perform preventative maintenance and repairs., • Produce timely and detailed service reports., • Document processes., • Follow all company procedures and protocols., • Communicate with technical team regarding open issues., • Comprehend customer requirements and make appropriate recommendations/briefings., • Build positive relationships with customers. Job Type: Trainee Job Type: Full-time Experience Required: • Leak Testing : 2 years (Required) Ability to Commute: • Ronkonkoma, NY 11779 (Required)

Experienced Project Manager - Farmingdale, NY .Exterior Facade, Building Envelope, Curtainwall .Construction Project Management experience a must.Salary negotiable, based on experience.

Review engineering drawings and compare them to estimates before client submission. Collaborate closely with engineering for timely delivery of drawings and type safety approvals.

The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. Science projects include research laboratories, vivarium, pilot scale manufacturing, major scientific equipment, and infrastructure projects. Builds tracking and reporting platforms that i

Our client is a multi-disciplinary firm providing architecture, structural and geotechnical engineering, interior design, landscape architecture, and digital modeling and animation services. Collaborate with multi-disciplinary teams, including structural, interior, landscape, and engineering profess

Experience managing budgets, design/project schedules, managing contractors, permits etc.Nice to Have Skills & Experience.Exposure to Bluebeam and AutoCAD.Insight Global is seeking a Project Manager to join one of their clients in the Deer Park area.As a leader in signage and installation, we're see

Project Engineer or Field Engineer. Bachelor's degree in Civil Engineering or a Construction Related Degree.

Bachelor’s degree in Mechanical Engineering, Civil Engineering, Construction Management, or a related field;. Lead progress meetings with clients, engineers, and field staff. Must exhibit proficiency in basic engineering computations and analysis;.

Field Service Technician in the Long Island, New York market to perform both preventative maintenance as well as repairs on our commercial fitness equipment in membership based gym settings. To achieve this goal, we offer robust and comprehensive benefits including: Medical, dental and vision insur

Consult with and gather information from technicians, engineers, contractors, etc.

Supervise and coordinate all project team members, including subcontractors, architects, engineers, and other stakeholders, ensuring clear communication and alignment throughout the project lifecycle. Bachelor’s degree in Construction Management, Civil Engineering, Architecture, or a related field

Familiar with equipment and materials terminology.

Collaborate with Engineers, Architects, Subcontractors, Vendors, etc. Determine required resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.

Coordinate cross-functional teams including engineering, procurement, construction, and safety.

The Maintenance Technician will report directly to the Manager of Buildings and Grounds.The duties of the position shall include, but are not limited to, the following:.Perform minor electrical work including but not limited to replacing outlets, ballasts, switches, light bulbs, and working with con

Bachelors degree in Mechanical Engineering, Civil Engineering, Construction Management, or a related field;. The Project Manager will work under the supervision of Project Executives while managing project engineers as required. Each phase of an operation is evaluated, planned, possibly re-engineere

The Maintenance Technician will report directly to the Manager of Buildings and Grounds.The duties of the position shall include, but are not limited to, the following:.Perform minor electrical work including but not limited to replacing outlets, ballasts, switches, light bulbs, and working with con

Collaborate closely with engineering for timely delivery of drawings and type safety approvals. Review engineering drawings and compare them to estimates before client submission.

The ideal candidate will be responsible for full cycle Project Management within a construction environment.Responsibilities will include defining project scope, planning, budgeting, resource allocation, conducting project status meetings and communicating updates to all stakeholders.Ability to work

Project Engineer or Field Engineer. Bachelor's degree in Civil Engineering or a Construction Related Degree.

Familiar with equipment and materials terminology.

Consult with and gather information from technicians, engineers, contractors, etc.

Supervise and coordinate all project team members, including subcontractors, architects, engineers, and other stakeholders, ensuring clear communication and alignment throughout the project lifecycle. Bachelors degree in Construction Management, Civil Engineering, Architecture, or a related field.

Science projects include research laboratories, vivarium, pilot scale manufacturing, major scientific equipment, and infrastructure projects. Builds tracking and reporting platforms that integrates into the ED&C project financial and engineering controls system. Bachelors degree in Architecture, Eng

Coordinate cross-functional teams including engineering, procurement, construction, and safety.

Our client is a multi-disciplinary firm providing architecture, structural and geotechnical engineering, interior design, landscape architecture, and digital modeling and animation services. Collaborate with multi-disciplinary teams, including structural, interior, landscape, and engineering profess

Experience managing budgets, design/project schedules, managing contractors, permits etc.Nice to Have Skills & Experience.Exposure to Bluebeam and AutoCAD.Insight Global is seeking a Project Manager to join one of their clients in the Deer Park area.As a leader in signage and installation, we're see

At Gilbert, we create exceptional architectural interiors and immersive trade show environments for high-end luxury retail brands.As a boutique firm known for craftsmanship, creativity, and white-glove service, we thrive on turning complexity into beauty.Every project has many moving parts—and eve

The ideal candidate will be responsible for full cycle Project Management within a construction environment.Responsibilities will include defining project scope, planning, budgeting, resource allocation, conducting project status meetings and communicating updates to all stakeholders.Ability to work

Professional Engineer (PE) license or Certified Construction Manager (CCM) preferred.

Collaborate with Engineers, Architects, Subcontractors, Vendors, etc. Determine required resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.

At Gilbert, we create exceptional architectural interiors and immersive trade show environments for high-end luxury retail brands.As a boutique firm known for craftsmanship, creativity, and white-glove service, we thrive on turning complexity into beauty.Every project has many moving partsand every

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Supervise and coordinate all project team members, including subcontractors, architects, engineers, and other stakeholders, ensuring clear communication and alignment throughout the project lifecycle. Bachelor's degree in Construction Management, Civil Engineering, Architecture, or a related field.

Job Title: Application Project Manager.Location: Rochester, NY or Napervilla, IL (Onsite).Work Authorization: US Citizen only.We are seeking an experienced Application/Project Manager to fill a critical gap and ensure smooth execution of development, ERP, and BI initiatives.The role requires strong

Job Description**: As a Warehouse Worker at DHL, you will perform a variety of tasks essential to the smooth operation of the warehouse.Your responsibilities will include picking and packing orders, handling inventory, and maintaining a clean and organized workspace.You will need to operate various

Collaborate with Engineers, Architects, Subcontractors, Vendors, etc. Determine required resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.